# SOME DESCRIPTIVE TITLE. # Copyright (C) 2001 Free Software Foundation, Inc. # Amr Fathy , 2001. # Mohammed Gamal , 2002 # msgid "" msgstr "" "Project-Id-Version: DrakX\n" "POT-Creation-Date: 2003-12-03 03:09+0100\n" "PO-Revision-Date: 2003-08-19 14:36-0300\n" "Last-Translator: Mohammed Gamal \n" "Language-Team: Arabic\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 0.9.6\n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Scanning partitions to find mount points" msgstr "جاري عمل مسح للتجزئات لإيجاد نقاط التحميل" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check additions/removals of suid root files." msgstr "if set to yes, check additions/removals of suid root files." #: ../../standalone/drakTermServ:1 #, c-format msgid "" "%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, " "0/1 for Local Config...\n" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Configuration changed - restart clusternfs/dhcpd?" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t\tErase=%s" msgstr "\t\tErase=%s" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Differential backups only save files that have changed or are new since the " "original 'base' backup." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "network printer port" msgstr "منفذ طابعة الشبكة" #: ../../standalone/drakTermServ:1 #, c-format msgid "Please insert floppy disk:" msgstr "فضلاً أدخل قرص مرن:" #: ../../standalone/drakTermServ:1 #, c-format msgid "DrakTermServ" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "PCMCIA" msgstr "PCMCIA" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" "جدول التقسيم المحفوظ ليس بنفس الحجم\n" "لا زلت تريد الإكمال؟" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Which username" msgstr "أي اسم مستخدم" #: ../../any.pm:1 #, c-format msgid "Which type of entry do you want to add?" msgstr "ما نوع المدخل الذي تريد اضافته؟" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Restore partition table" msgstr "استعادة جدول التقسيم" #: ../../standalone/drakconnect:1 #, c-format msgid "Configure hostname..." msgstr "إعداد اسم المستضيف..." #: ../../printer/cups.pm:1 #, c-format msgid "On CUPS server \"%s\"" msgstr "على خادم CUPS \"%s\"" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Post-install configuration" msgstr "تهيئة ما بعد التثبيت" #: ../../standalone/drakperm:1 #, c-format msgid "" "The current security level is %s\n" "Select permissions to see/edit" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Use ``%s'' instead" msgstr "استخدم ``%s'' بدلا من ذلك" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Type" msgstr "النوع" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Also printers configured with the PPD files provided by their manufacturers " "or with native CUPS drivers cannot be transferred." msgstr "" "\n" "أيضاً الطابعات المهيئة بملفات PPD من مصنّعيها أو بمشغلات CUPS الخاصة بها لا " "يمكن نقلها." #: ../../lang.pm:1 #, c-format msgid "Sri Lanka" msgstr "سريلانكا" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "" "الطابعات التالية\n" "\n" "%s%s\n" "متصلة مباشرةً بنظامك" #: ../../lang.pm:1 #, c-format msgid "Central African Republic" msgstr "جمهورية وسط أفريقية" #: ../../network/network.pm:1 #, c-format msgid "Gateway device" msgstr "جهاز البوابة" #: ../../standalone/drakfloppy:1 #, c-format msgid "Advanced preferences" msgstr "تفضيلات متقدمة" #: ../../standalone/drakbackup:1 #, c-format msgid "Net Method:" msgstr "Net Method:" #: ../../harddrake/data.pm:1 #, c-format msgid "Ethernetcard" msgstr "بطاقة ايثرنت" #: ../../security/l10n.pm:1 #, c-format msgid "If set, send the mail report to this email address else send it to root" msgstr "" "عند التعيين, أرسل التقرير بالبريد الى هذا العنوان أو قم بإرساله الى المستخدم " "الجذر" #: ../../modules/interactive.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Parameters" msgstr "Parameters" #: ../../standalone/draksec:1 #, c-format msgid "no" msgstr "لا" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Auto-detect" msgstr "تحقق آلي" #: ../../standalone/drakconnect:1 #, c-format msgid "Interface:" msgstr "الواجهة:" #: ../../steps.pm:1 #, c-format msgid "Select installation class" msgstr "اختر نوع التثبيت" #: ../../network/tools.pm:1 #, c-format msgid "" "The system doesn't seem to be connected to the Internet.\n" "Try to reconfigure your connection." msgstr "" "لا يبدو أن النظام متصل بالإنترنت.\n" "حاول اعادة تهيئة الوصلة." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Connect your printer to a Linux server and let your Windows machine(s) " "connect to it as a client.\n" "\n" "Do you really want to continue setting up this printer as you are doing now?" msgstr "" "وصّل الطابعة الى خادم Linux و اجعل ماكينات Windows تتصل به كعملاء.\n" "\n" "هل تريد فعلاً متابعة اعداد هذه الطابعة كما تفعل الآن؟" #: ../../lang.pm:1 #, c-format msgid "Belarus" msgstr "روسيا البيضاء" #: ../../partition_table.pm:1 #, c-format msgid "Error writing to file %s" msgstr "خطأ أثناء الكتابة الى الملف %s" #: ../../security/l10n.pm:1 #, c-format msgid "Report check result to syslog" msgstr "أرسل تقرير بنتيجة الاختبار الى syslog" #: ../../services.pm:1 #, c-format msgid "" "apmd is used for monitoring battery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" "تُستخدم apmd لمراقبة حالة البطارية و تسجيلها عن طريق syslog.\n" "يمكن كذلك استخدامها لإغلاق الجهاز عند ضعف البطارية." #: ../../standalone/drakbackup:1 #, c-format msgid "Use tape to backup" msgstr "استخم الشريط للنسخ الإحتياطي" #: ../../install_steps_gtk.pm:1 #, c-format msgid "The following packages are going to be installed" msgstr "سيتم تثبيت الحزم التالية" #: ../../printer/printerdrake.pm:1 #, c-format msgid "CUPS configuration" msgstr "CUPS تهيئة" #: ../../standalone/drakbackup:1 #, c-format msgid "Total progress" msgstr "اجمالي التقدم" #: ../../install_interactive.pm:1 #, c-format msgid "Not enough free space to allocate new partitions" msgstr "لا توجد مساحة فارغة لعمل التجزئات الجديدة" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Moving" msgstr "جاري النقل" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Drakbackup activities via %s:\n" "\n" msgstr "" "\n" "نشاطات Drakbackup عن طريق %s:\n" "\n" #: ../../standalone/draksec:1 #, c-format msgid "yes" msgstr "نعم" #: ../../printer/printerdrake.pm:1 #, c-format msgid "(" msgstr "(" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Welcome to The Network Configuration Wizard.\n" "\n" "We are about to configure your internet/network connection.\n" "If you don't want to use the auto detection, deselect the checkbox.\n" msgstr "" "أهلاً بك في معالج تهيئة الشبكة.\n" "\n" "نحن على وشك تهيئة وصلة الشبكة/الإنترنت الخاصة بك.\n" "اذا لم تريد استخدام التحقق الآلي, احذف التأشير من على الصندوق.\n" #: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 #, c-format msgid ")" msgstr ")" #: ../../lang.pm:1 #, c-format msgid "Lebanon" msgstr "لبنان" #: ../../mouse.pm:1 #, c-format msgid "MM HitTablet" msgstr "MM HitTablet" #: ../../services.pm:1 #, c-format msgid "Stop" msgstr "توقف" #: ../../standalone/scannerdrake:1 #, c-format msgid "Edit selected host" msgstr "حرر المستضيف المختار" #: ../../standalone/drakbackup:1 #, c-format msgid "No CD device defined!" msgstr "لم يتم تعريف جهاز قرص مدمج!" #: ../../network/shorewall.pm:1 #, fuzzy, c-format msgid "" "Please enter the name of the interface connected to the " "internet. \n" " \n" "Examples:\n" " ppp+ for modem or DSL connections, \n" " eth0, or eth1 for cable connection, \n" " ippp+ for a isdn connection.\n" msgstr "" "فضلاً أدخل اسم الواجهة المتصلة بالإنترنت.\n" "\n" "أمثلة:\n" "\t\tppp+ لوصلات المودم و DSL, \n" "\t\teth0, أو eth1 لوصلات الكيبل, \n" "\t\tippp+ لوصلات ISDN.\n" #: ../../standalone/drakbackup:1 #, c-format msgid "\tUse .backupignore files\n" msgstr "\tاستخدم ملفات .backupignore\n" #: ../../keyboard.pm:1 #, c-format msgid "Bulgarian (phonetic)" msgstr "البلغارية (صوتية)" #: ../../standalone/drakpxe:1 #, c-format msgid "The DHCP start ip" msgstr "DHCP start ip" #: ../../Xconfig/card.pm:1 #, c-format msgid "256 kB" msgstr "256 كيلوبايت" #: ../../standalone/drakbackup:1 #, c-format msgid "Don't rewind tape after backup" msgstr "لا تقم بإرجاع الشريط بعد النسخ" #: ../../any.pm:1 #, c-format msgid "Bootloader main options" msgstr "خيارات محمّل الإقلاع الرئيسية" #: ../../standalone.pm:1 #, c-format msgid "" "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" "usbtable] [--dynamic=dev]" msgstr "" "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" "usbtable] [--dynamic=dev]" #: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Tape" msgstr "شريط البيانات" #: ../../lang.pm:1 #, c-format msgid "Malaysia" msgstr "ماليزيا" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Scanning network..." msgstr "جاري مسح الشبكة..." #: ../../standalone/drakbackup:1 #, c-format msgid "" "With this option you will be able to restore any version\n" " of your /etc directory." msgstr "" "بهذا الخيار يمكنك استرجاع أي نسخة من\n" " دليل /etc الخاص بك." #: ../../standalone/drakedm:1 #, c-format msgid "The change is done, do you want to restart the dm service ?" msgstr "تم عمل التغيير, هل تريد اعادة تشغيل خدمة dm ؟" #: ../../keyboard.pm:1 #, c-format msgid "Swiss (French layout)" msgstr "السويسرية (تصميم فرنسي)" #: ../../raid.pm:1 #, c-format msgid "mkraid failed (maybe raidtools are missing?)" msgstr "فشل mkraid (ربما تكون حزمة raidtools مفقودة؟)" #: ../../standalone/drakbackup:1 #, c-format msgid "August" msgstr "أغسطس" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "FTP server" msgstr "خادم NTP" #: ../../harddrake/data.pm:1 #, c-format msgid "Webcam" msgstr "كاميرات الويب" #: ../../standalone/harddrake2:1 #, c-format msgid "size of the (second level) cpu cache" msgstr "حجم ذاكرة المعالج المخبئية (المستوى الثاني)" #: ../../harddrake/data.pm:1 #, c-format msgid "Soundcard" msgstr "بطاقة الصوت" #: ../../standalone/drakbackup:1 #, c-format msgid "Month" msgstr "الشهر" #: ../../standalone/drakbackup:1 #, c-format msgid "Search for files to restore" msgstr "ابحث عن الملفات المطلوب استعادتها" #: ../../lang.pm:1 #, c-format msgid "Luxembourg" msgstr "لوكسمبورغ" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\".\n" msgstr "لطباعة ملف من سطر الأوامر استخدام الأمر \"%s \".\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Level %s\n" msgstr "المستوى %s\n" #: ../../keyboard.pm:1 #, c-format msgid "Syriac (phonetic)" msgstr "السريانية (صوتي)" #: ../../lang.pm:1 #, c-format msgid "Iran" msgstr "ايران" # U+200F (RTL mark) has been inserted after "Bus" so the display # on screen is correctly "datadatadata :Bus", and not "Bus: datadatadata" #: ../../standalone/harddrake2:1 #, c-format msgid "Bus" msgstr "Bus‏" #: ../../lang.pm:1 #, c-format msgid "Iraq" msgstr "العراق" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "connecting to %s ..." msgstr "جاري الإتصال بمعالج Bugzilla ..." #: ../../standalone/drakgw:1 #, c-format msgid "Potential LAN address conflict found in current config of %s!\n" msgstr "" "تم ايجاد تعارض في عنوان الشبكة المحلية المبدئي في الإعداد الحالي لـ%s!\n" #: ../../standalone/drakgw:1 #, c-format msgid "Configuring..." msgstr "جاري الإعداد..." #: ../../harddrake/v4l.pm:1 #, c-format msgid "" "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" "detect the rights parameters.\n" "If your card is misdetected, you can force the right tuner and card types " "here. Just select your tv card parameters if needed." msgstr "" "لأغلب بطاقات التلفاز الحديثة, وحدة bttv لنواة Linux يمكنها التحقق آلياً من " "المعاملات الصحيحة.\n" "اذا تم التعرف على البطاقة بشكل خاطئ, يمكنك ادخال التونر و نوع البطاقة الصحيح " "هنا. فقط اختر المعاملات المناسبة لبطاقة الشاشة." #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Password (again)" msgstr "كلمة المرور (ثانية)" #: ../../standalone/drakfont:1 #, c-format msgid "Search installed fonts" msgstr "ابحث في الخطوط المثبتة" #: ../../standalone/drakboot:1 #, c-format msgid "Default desktop" msgstr "سطح المكتب الإفتراضي" #: ../../standalone/drakbug:1 #, c-format msgid "" "To submit a bug report, click on the button report.\n" "This will open a web browser window on %s\n" " where you'll find a form to fill in. The information displayed above will " "be \n" "transferred to that server." msgstr "" "لتسليم تقرير العيوب, اضغط على زر تقرير.\n" "سيقوم هذا بقتح متصفح ويب على الصفحة %s\n" " حيث ستجد استمارة عليك ملؤها. المعلومات المذكرة أعلاه سيتم نقلها\n" "الى ذلك الخادم" #: ../../lang.pm:1 #, c-format msgid "Venezuela" msgstr "فينزويلا" #: ../../network/network.pm:1 ../../printer/printerdrake.pm:1 #: ../../standalone/drakconnect:1 #, c-format msgid "IP address" msgstr "عنوان IP" #: ../../install_interactive.pm:1 #, c-format msgid "Choose the sizes" msgstr "اختر الأحجام" #: ../../standalone/drakbackup:1 #, c-format msgid "" "List of data corrupted:\n" "\n" msgstr "" "قائمة بالبيانات الفاسدة:\n" "\n" #: ../../fs.pm:1 #, c-format msgid "" "Can only be mounted explicitly (i.e.,\n" "the -a option will not cause the file system to be mounted)." msgstr "" #: ../../network/modem.pm:1 #, c-format msgid "" "Your modem isn't supported by the system.\n" "Take a look at http://www.linmodems.org" msgstr "" "المودم لديك غير مدعوم من النظام.\n" "الق نظرة على http://www.linmodems.org" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose another partition" msgstr "إختر شاشة" #: ../../standalone/drakperm:1 #, c-format msgid "Current user" msgstr "المستخدم الحالي" #: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Username" msgstr "اسم المستخدم" #: ../../keyboard.pm:1 #, c-format msgid "Left \"Windows\" key" msgstr "مفتاح \"Windows\" الأيسر" #: ../../lang.pm:1 #, c-format msgid "Guyana" msgstr "غويانا" #: ../../standalone/drakTermServ:1 #, c-format msgid "dhcpd Server Configuration" msgstr "تهيئة خادم dhcpd" #: ../../standalone/drakperm:1 #, c-format msgid "" "Used for directory:\n" " only owner of directory or file in this directory can delete it" msgstr "" "يُستخدم للدليل:\n" " يمكن فقط لمالك هذا الدليل أو الملف الغاؤه" #: ../../printer/main.pm:1 #, c-format msgid " on Novell server \"%s\", printer \"%s\"" msgstr " على خادم Novell \"%s\", الطابعة \"%s\"" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Printer Name" msgstr "اسم صف الطابعة" #: ../../../move/move.pm:1 #, c-format msgid "Setting up USB key" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "Remove a module" msgstr "ازالة وحدة" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1 #: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/drakconnect:1 #, c-format msgid "Password" msgstr "كلمة المرور" #: ../../standalone/drakbackup:1 #, c-format msgid "Advanced Configuration" msgstr "إعداد متقدم" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Scanning on your HP multi-function device" msgstr "جاري المسح على جهاز HP متعدد الوظائف" #: ../../any.pm:1 #, c-format msgid "Root" msgstr "الجذر" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose an existing RAID to add to" msgstr "اختر RAID موجود للاضافة" #: ../../keyboard.pm:1 #, c-format msgid "Turkish (modern \"Q\" model)" msgstr "التركية (طراز \"Q\" الحديث)" #: ../../standalone/drakboot:1 #, c-format msgid "Lilo message not found" msgstr "لم يتم ايجاد رسالة Lilo" #: ../../services.pm:1 #, c-format msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" "اعادة توليد آلية لترويسة النواة في دليل /boot لـ\n" "/usr/include/linux/{autoconf,version}.h" #: ../../standalone/drakfloppy:1 #, c-format msgid "if needed" msgstr "اذا احتجته" #: ../../standalone/drakclock:1 #, c-format msgid "" "We need to install ntp package\n" " to enable Network Time Protocol" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Failed..." msgstr "فشلت الإستعادة..." #: ../../standalone/drakbackup:1 #, c-format msgid "Store the password for this system in drakbackup configuration." msgstr "" #: ../../install_messages.pm:1 #, c-format msgid "" "Introduction\n" "\n" "The operating system and the different components available in the Mandrake " "Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandrake Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "MandrakeSoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if MandrakeSoft S.A. has been advised of the possibility or " "occurence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandrake Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to MandrakeSoft.\n" "The programs developed by MandrakeSoft S.A. are governed by the GPL License. " "Documentation written \n" "by MandrakeSoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "MandrakeSoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of " "MandrakeSoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact MandrakeSoft S.A. \n" msgstr "" "مقدمة\n" "\n" "نظام التشغيل و المكونات المختلفة الموجودة في توزيعة Mandrake Linux.\n" "ستسمى \"المنتجات البرمجية\" في ما بعد. المنتجات البرمجية تتضمن, و لكن غير " "محدودة في\n" "مجموعة البرامج و الطرق و القواعد و وثائق المساعدة المتعلقة بنظام\n" "التشغيل و المكونات المختلفة في توزيعة Mandrake Linux.\n" "\n" "\n" "1. اتفاقية الترخيص\n" "\n" "فضلاً اقرأ هذه الوثيقة باهتمام. هذه الوثيقة هي اتفاقية الترخيص بينك و \n" "بين MandrakeSoft S.A. و تنطبق على المنتجات البرمجية.\n" "بتثبيتك, مضاعفتك, أو استخدامك لهذه المنتجات البرمجيات بأي شكل فإنك\n" "تقبل بشكل نهائي و توافق بشكل كامل على البنود و الشروط الخاصة بهذا الترخيص. \n" "اذا كنت لا توافق على أي جزء من هذا الترخيص, فلن يسمح لك بتثبيت أو مضاعفة أو " "استخدام \n" "المنتجات البرمجية. \n" "أي محاولة لتثبيت أو مضاعفة أو استخدام المنتجات البرمجية بشكل لا يتوافق مع \n" "بنود و شروط هذا الترخيص هو غير صالح و سينهي حقوقك تحت هذا \n" "الترخيص. عند انهاء هذا الترخيص, يجب عليك تدمير جميع نسخ هذه \n" "المنتجات البرمجية.\n" "\n" "\n" "2. الضمان المحدود\n" "\n" "المنتجات البرمجية و وثائق المساعدة المرفقة هي مرفقة \"كما هي\",. بدون ضمان. " "حسب\n" "الحد الذي يسمح به القانون.\n" "لن تكون MandrakeSoft S.Aa تحت أي ظروف و الى الحد الذي يسمح به القانون مسؤولة " "عن أي خسارة خاصة,\n" "بسبب حادث, مباشرة, أو غير مباشرة (على سبيل المثال لا الحصر\n" "خسارة الأعمال, انقطاع الأعمال, الخسارة المالية, الرسوم القانونية, العقوبات " "الصادرة من حكم\n" "محكمة, أو أي خسارة ناتجة أخرى) بسبب استخدام أو عدم القدرة على استخدام هذه " "المنتجات \n" "البرمجية, حتى و إن تم نصح MandrakeSoft S.A. حول امكانية أو حدوث مثل هذه \n" "الخسائر.\n" "\n" "المسؤولية المحدودة المرتبطة بامتلاك أو استخدام البرمجيات الممنوعة في بعض " "البلدان\n" "\n" "الى الحد الذي يسمح به القانون, MandrakeSoft S.A. و موزعوها لن يكونوا, تحت أي " "ظروف, مسؤولين \n" "عن أي عن أي خسارة خاصة,\n" "بسبب حادث, مباشرة, أو غير مباشرة (على سبيل المثال لا الحصر\n" "خسارة الأعمال, انقطاع الأعمال, الخسارة المالية, الرسوم القانونية, العقوبات " "الصادرة من حكم\n" "محكمة, أو أي خسارة ناتجة أخرى) بسبب\n" "امتلاك و استخدام المكونات البرمجية أو بسبب تنزيل بعض المكونات البرمجية \n" "من أحد مواقع Mandrake Linux اذا كانت مثل هذه المكونات ممنوعة أو محدودة " "الاستخدام في بعض البلدان بسبب القوانين المحلية.\n" "هذه المسؤولية المحدودة تنطبق على, لكن غير محدودة في, مكونات التشفير القوية \n" "المضمنة في المنتجات البرمجية.\n" "\n" "\n" "3. الترخيص العمومي (GPL) و التراخيص ذات الصلة\n" "\n" "المنتجات البرمجية تتكون من مكونات تم انشاؤها عن طريق أشخاص أو كيانات " "مختلفة. معظم \n" "هذه المكونات هي تحت ترخيص GNU العمومي (GNU General Public Licence) \n" "و التي ستسمى في ما بعد بـ \"GPL\", أو التراخيص المماثلة. معظم هذه التراخيص " "تسمح لك باستخدام أو \n" "مضاعفة أو تعديل أو اعدة توزيع المكونات التي تغطيها. فضلاً اقرأ بنود و شروط \n" "اتفاقية الترخيص لكل مكون باهتمام قبل استخدام أي مكون. أي سؤال \n" "حول أي مكون يجب أن يتم توجيهه الى مؤلف المكون و ليس الى MandrakeSoft.\n" "البرامج المطورة من قبل MandrakeSoft S.A. محكومة بموجب ترخيص GPL. وثائق " "المساعدة المكتوبة \n" "من قبل MandrakeSoft S.A. محكومة بترخيص خاص. فضلاً راجع وثائق المساعدة \n" "للمزيد من التفاصيل.\n" "\n" "\n" "4. حقوق الملكية الفكرية\n" "\n" "كل الحقوق الخاصة بمكونات هذه المنتجات البرمجية تخص مؤلفيها و هي \n" "بموجب قوانين الملكية الفكرية و الحقوق المنطبقة على البرمجيات.\n" "تحفظ MandrakeSoft S.A. حقوقها لتعديل أو تغيير المنتجات البرمجية, ككل أو \n" "كأجزاء, بكل الوسائل و لكافة الأغراض.\n" "\"Mandrake\", \"Mandrake Linux\" , الشعارات المرتبطة هي علامات تجارية لـ " "MandrakeSoft S.A. \n" "\n" "\n" "5. القوانين الحاكمة \n" "\n" "اذا كان أي جزء من الاتفاقية قد أصبح غير صالح, غير شرعي, أو غير قابل للتطبيق " "بحكم محكمة, سيتم \n" "استثناء هذا الجزء من العقد. و ستظل ملتزماً بالأجزاء الأخـرى القابلة للتطبيق " "من هذه \n" "الاتفاقية.\n" "بنود و شروط هذا الترخيص هي محكومة بموجب قوانين فرنسا.\n" "كافة النزاعات حول بنود هذا الترخيص سيتم حلها بشكل أفضل في المحكمة.\n" "كحل أخير, سيتم تحويل النزاع الى المحاكم القانونية المختصة في باريس - فرنسا.\n" "لأي سؤال حول هذه الوثيقة, فضلاً اتصل بـ MandrakeSoft S.A. \n" #: ../../standalone/drakboot:1 #, c-format msgid "Default user" msgstr "المستخدم الإفتراضي" #: ../../standalone/draksplash:1 #, c-format msgid "" "the progress bar x coordinate\n" "of its upper left corner" msgstr "" "الإحداثي السيني للركن الأيسر الأعلى\n" "لشريط التقدم" #: ../../standalone/drakgw:1 #, c-format msgid "Current interface configuration" msgstr "تهيئة الواجهة الحالية" #: ../../printer/data.pm:1 #, c-format msgid "LPD - Line Printer Daemon" msgstr "LPD - Line Printer Daemon" #: ../../network/isdn.pm:1 #, c-format msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your " "card.\n" msgstr "" "\n" "اذا كانت لديك بطاقة ISA, فإن القيم التي ستعرض على الشاشة التالية يجب أن تكون " "صحيحة.\n" "\n" "اذا كانت لديك بطاقة PCMCIA, يجب عليك أن تعرف قيم \"irq\" و \"io\" الخاصة " "ببطاقتك.\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do not print any test page" msgstr "لا تطبع أي صفحات اختبارية" #: ../../keyboard.pm:1 #, c-format msgid "Gurmukhi" msgstr "غورموكهي" #: ../../standalone/drakTermServ:1 #, c-format msgid "%s already in use\n" msgstr "" #: ../../any.pm:1 #, c-format msgid "Force No APIC" msgstr "اجبار على عدم استخدام APIC" #: ../../install_steps_interactive.pm:1 #, c-format msgid "This password is too short (it must be at least %d characters long)" msgstr "كلمة المرو هذه قصيرة جداً (يجب أن تكون %d رموز على الأقل)" #: ../../standalone.pm:1 #, c-format msgid "[keyboard]" msgstr "[keyboard]" #: ../../network/network.pm:1 #, c-format msgid "FTP proxy" msgstr "بروكسي FTP" #: ../../standalone/drakfont:1 #, c-format msgid "Install List" msgstr "ثبّت القائمة" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Change\n" "Restore Path" msgstr "" "غيّر\n" "مسار الإستعادة" #: ../../standalone/logdrake:1 #, c-format msgid "Show only for the selected day" msgstr "إعرض سجلات اليوم المختار فقط" #: ../../standalone/drakbackup:1 #, c-format msgid "\tLimit disk usage to %s MB\n" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "512 kB" msgstr "512 كيلوبايت" #: ../../standalone/scannerdrake:1 #, c-format msgid "(Note: Parallel ports cannot be auto-detected)" msgstr "(ملحوظة: المنافذ المتوازية لا يمكن التحقق منها آلياً)" #: ../../standalone/logdrake:1 #, c-format msgid "N" msgstr "N" #: ../../network/isdn.pm:1 #, c-format msgid "What kind of card do you have?" msgstr "ما هو نوع البطاقة لديك؟" #: ../../standalone/logdrake:1 #, c-format msgid "O" msgstr "O" #: ../../install_steps_interactive.pm:1 ../../steps.pm:1 #, c-format msgid "Security" msgstr "الأمن" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can also use the graphical interface \"xpdq\" for setting options and " "handling printing jobs.\n" "If you are using KDE as desktop environment you have a \"panic button\", an " "icon on the desktop, labeled with \"STOP Printer!\", which stops all print " "jobs immediately when you click it. This is for example useful for paper " "jams.\n" msgstr "" "يمكنك كذلك استخدام البرنامج الرسومي \"xpdq\" لتعيين الخيارات و التعامل مع " "وظائف الطباعة.\n" "اذا كنت تستعمب كيدي كبيئة سطح مكتب فلديك أيقونة \"للطوارئ\", اسمها \"STOP " "Printer!\", تقوم بإيقاف كل وظائف الطباعة فوراً عند النقر عليها. هذا المثال " "مفيد للحالات التي يحصل فيها تعثر في استخدام الورق.\n" #: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #: ../../standalone/printerdrake:1 #, c-format msgid "Q" msgstr "Q" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Unable to find backups to restore...\n" msgstr "رجاء اختر تاريخ الإستعادة..." #: ../../standalone/harddrake2:1 #, c-format msgid "Unknown" msgstr "غير معروف" #: ../../printer/printerdrake.pm:1 #, c-format msgid "This server is already in the list, it cannot be added again.\n" msgstr "هذا الخادم موجود في القائمة مسبقاً, لا يمكن اضافته مرة أخرى.\n" #: ../../network/netconnect.pm:1 ../../network/tools.pm:1 #, c-format msgid "Network Configuration" msgstr "اعدادات الشبكة" #: ../../standalone/logdrake:1 #, c-format msgid "S" msgstr "S" #: ../../network/isdn.pm:1 #, c-format msgid "" "Protocol for the rest of the world\n" "No D-Channel (leased lines)" msgstr "" "بروتوكول لبقية العالم\n" "لا D-Channel (خطوط مؤجرة)" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - /etc/xinetd.d/tftp:\n" " \tdrakTermServ will configure this file to work in conjunction with " "the images created\n" " \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up " "the boot image to \n" " \teach diskless client.\n" "\n" " \tA typical tftp configuration file looks like:\n" " \t\t\n" " \tservice tftp\n" "\t\t\t{\n" " disable = no\n" " socket_type = dgram\n" " protocol = udp\n" " wait = yes\n" " user = root\n" " server = /usr/sbin/in.tftpd\n" " server_args = -s /var/lib/tftpboot\n" " \t}\n" " \t\t\n" " \tThe changes here from the default installation are changing the " "disable flag to\n" " \t'no' and changing the directory path to /var/lib/tftpboot, where " "mkinitrd-net\n" " \tputs its images." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Option %s must be a number!" msgstr "الخيار %s يجب أن يكون رقماً!" #: ../../standalone/drakboot:1 ../../standalone/draksplash:1 #, c-format msgid "Notice" msgstr "ملاحظة" #: ../../install_steps_interactive.pm:1 #, c-format msgid "You have not configured X. Are you sure you really want this?" msgstr "لم تقم بتهيئة خادم X. هل أنت متأكد أنك تريد ذلك؟" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The configuration of the printer will work fully automatically. If your " "printer was not correctly detected or if you prefer a customized printer " "configuration, turn on \"Manual configuration\"." msgstr "" "اعداد الطابعة سيعمل بشكل آلي. اذا لم يتم اكتشاف طابعتك بالشكل الصحيح أو اذا " "كنت تفضل اعداد مخصص شغّل \"تهيئة يدوية\"." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "What type of partitioning?" msgstr "أي نوع من التجزئة؟" #: ../../standalone/drakbackup:1 #, c-format msgid "" "file list sent by FTP: %s\n" " " msgstr "" "قائمة الملفات المرسلة من FTP: %s\n" " " #: ../../standalone/drakconnect:1 #, c-format msgid "Interface" msgstr "الواجهة" #: ../../standalone/drakbackup:1 #, c-format msgid "Multisession CD" msgstr "قرص مدمج متعدد الجلسات" #: ../../modules/parameters.pm:1 #, c-format msgid "comma separated strings" msgstr "حرفيات مفصولة بالفاصلة" #: ../../standalone/scannerdrake:1 #, c-format msgid "These are the machines from which the scanners should be used:" msgstr "توجد ماكينات يمكن استخدام الماسحات الضوئية منها:" #: ../../standalone/logdrake:1 #, c-format msgid "Messages" msgstr "الرسائل" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Unknown|CPH06X (bt878) [many vendors]" msgstr "غير معروف|CPH06X (bt878) [مصنعون كثيرون]" #: ../../network/drakfirewall.pm:1 #, c-format msgid "POP and IMAP Server" msgstr "خادم POP و IMAP" #: ../../lang.pm:1 #, c-format msgid "Mexico" msgstr "المكسيك" #: ../../standalone/harddrake2:1 #, c-format msgid "Model stepping" msgstr "Model stepping" #: ../../lang.pm:1 #, c-format msgid "Rwanda" msgstr "رواندا" #: ../../lang.pm:1 #, c-format msgid "Switzerland" msgstr "السويسرية" #: ../../lang.pm:1 #, c-format msgid "Brunei Darussalam" msgstr "سلطنة بروناي" #: ../../modules/interactive.pm:1 #, c-format msgid "Do you have any %s interfaces?" msgstr "هل لديك أي واجهات %s؟" #: ../../standalone/drakTermServ:1 #, c-format msgid "You must be root to read configuration file. \n" msgstr "يجب أن تكون المستخدم الجذر لقراءة ملف التهيئة. \n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote lpd Printer Options" msgstr "خيارات طابعة lpd البعيد" #: ../../help.pm:1 #, c-format msgid "" "GNU/Linux is a multi-user system, meaning each user may have their own\n" "preferences, their own files and so on. You can read the ``Starter Guide''\n" "to learn more about multi-user systems. But unlike \"root\", who is the\n" "system administrator, the users you add at this point will not be\n" "authorized to change anything except their own files and their own\n" "configurations, protecting the system from unintentional or malicious\n" "changes that impact on the system as a whole. You will have to create at\n" "least one regular user for yourself -- this is the account which you should\n" "use for routine, day-to-day use. Although it is very easy to log in as\n" "\"root\" to do anything and everything, it may also be very dangerous! A\n" "very simple mistake could mean that your system will not work any more. If\n" "you make a serious mistake as a regular user, the worst that will happen is\n" "that you will lose some information, but not affect the entire system.\n" "\n" "The first field asks you for a real name. Of course, this is not mandatory\n" "-- you can actually enter whatever you like. DrakX will use the first word\n" "you typed in this field and copy it to the \"%s\" field, which is the name\n" "this user will enter to log onto the system. If you like, you may override\n" "the default and change the username. The next step is to enter a password.\n" "From a security point of view, a non-privileged (regular) user password is\n" "not as crucial as the \"root\" password, but that is no reason to neglect\n" "it by making it blank or too simple: after all, your files could be the\n" "ones at risk.\n" "\n" "Once you click on \"%s\", you can add other users. Add a user for each one\n" "of your friends: your father or your sister, for example. Click \"%s\" when\n" "you have finished adding users.\n" "\n" "Clicking the \"%s\" button allows you to change the default \"shell\" for\n" "that user (bash by default).\n" "\n" "When you have finished adding users, you will be asked to choose a user\n" "that can automatically log into the system when the computer boots up. If\n" "you are interested in that feature (and do not care much about local\n" "security), choose the desired user and window manager, then click \"%s\".\n" "If you are not interested in this feature, uncheck the \"%s\" box." msgstr "" "نظام Linux نظام متعدد المستخدمين, مما يعني أن كل مستخدم\n" "له تفضبلاته الخاصة و ملفاته الخاصة و ما الى ذلك. يمكنك قراءة ``دليل " "المبتدئ''\n" "لتتعلم المزيد حول الأنظمة متعددة المستخدمين. بعكس المستخدم \"الجذر\", وهو\n" "مدير النظام, فإن المستخدمين الذين ستضيفهم في هذه النقطة لن يتم\n" "تخويلهم لتعديل أي شئ باستثناء ملفات و اعداداتهم \n" "الخاصة, مما يحمي النظام من أي تغييرات خطرة أو غير مقصودة\n" "قد تؤثر على النظام ككل. يجب عليك انشاء مستخدم عادي\n" "واحد فقط على الأقل -- هذا هو الحساب الذي يجب أن تستخدمه\n" "للاستخدام اليومي العادي. بالرغم من سهولة الدخول كمستخدم\n" "\"جذر\" لفعل أي شئ و كل شئ, لكن هذا قد يكون خطراً! خطأ\n" "بسيط قد يعني أن نظامك لن يعود قادراً على العمل في ما بعد. اذا\n" "قمت بخطأ جدي كمستخدم عادي فإن أسوأ ما قد يحصل هو خسارتك\n" "لبعض المعلومات, لكن هذا لن يؤثر على النظام كاملاً.\n" "\n" "الحقل الأول سيسألك عن اسمك الحقيقي. بالطبع هذا الحقل\n" "ليس اجبارياً -- يمكنك ادخال أي شئ تريد. DrakX سيستخدم الكلمة\n" "الأولى التي قمت بإدخالها ف هذا الحقل و سينقلها ال حقل \"%s\", الذي\n" "هو الاسم الذي سيدخله المستخدم للدخول على النظام. الخطوة التالية هي ادخال " "كلمة المرور.\n" "من وجهة نظر أمنية, فإن مستخدم عادي بدون صالحيات لا يحتاج الى كلمة\n" "مرور مثل كل المستخدم \"الجذر\", لكن ليس هناك سبب للتغاضي\n" "عنها أو جعلها فارغة أو جعلها سهلة جداً: بعد كل شئ, ملفاتك قد تكون هي\n" "التي في خطر.\n" "\n" "بمجرد نقرك على زر \"%s\", يمكنك اضافة مستخدمين آخرين. أضف اسم مستخدم\n" "لكل صديق من أصدقائك أو لأبيك لأختك,مثلاً. انقر \"%s\" عندما\n" "تنتهي من اضافة المستخدمين.\n" "\n" "نقر زر \"%s\" يسمح لك بتغيير \"الغلاف\" أو \"سطر الأوامر\" لكل\n" "مستخدم (bash هو الافتراضي).\n" "\n" "عندما تنتهي من اضافة المستخدمين, سيتم سؤالك عما اذا كنت\n" "تريد اختيار مستخدم يتم الدخول به الى النظام تلقائياً عند بدء التشغيل.\n" "اذا كنت مهتماُ بهذه الميزة (و لم تكن مهتماً كثيراً بالمسائل\n" "الأمنية),. اختر المستخدم المطلوب و مدير النوافذ ثم انقر \"%s\".\n" "اذا لم تكن مهتماً بهذه الميزة, قم بإزالة التأشير من صندوق \"%s\"." #: ../../standalone/drakconnect:1 #, c-format msgid "Configure Internet Access..." msgstr "إعداد الدخول الى الإنترنت..." #: ../../standalone/drakbackup:1 #, c-format msgid "Please choose the time interval between each backup" msgstr "فضلا اختر الفترة ما بين كل عملية نسخ احتياطي" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Norway" msgstr "النرويج" #: ../../standalone/drakconnect:1 #, c-format msgid "Delete profile" msgstr "احذف التشكيل" #: ../../keyboard.pm:1 #, c-format msgid "Danish" msgstr "الدنماركية" #: ../../services.pm:1 #, c-format msgid "" "Automatically switch on numlock key locker under console\n" "and XFree at boot." msgstr "" "تقوم بتشغيل مفتاح numlock آلياً في سطر الأوامر\n" "و XFree عند الإقلاع." #: ../../network/network.pm:1 #, c-format msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" "فضلاً أدخل تهيئة IP الخاصة بهذه الماكينة.\n" "كل مادة يجب ادخالها كعنوان IP بشكل منقوط\n" "(مثلاً, 1.2.3.4)." #: ../../help.pm:1 #, c-format msgid "" "The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n" "knows if a selected package is located on another CD-ROM so it will eject\n" "the current CD and ask you to insert the correct CD as required." msgstr "" "تثبيت Mandrake Linux موزع على العديد من الأقراص. DrakX\n" "يعلم إذا كانت حزمة ما في قرص آخر و سيخرج القرص\n" "الحالي و سيطلب منك أن تدخل قرصاً مختلفا كما هو مطلوب." #: ../../standalone/drakperm:1 #, c-format msgid "When checked, owner and group won't be changed" msgstr "عند التأشير لن يتم تغيير المالك و المجموعة" #: ../../lang.pm:1 #, c-format msgid "Bulgaria" msgstr "بلغاريا" #: ../../standalone/drakbackup:1 #, c-format msgid "Tuesday" msgstr "الثلاثاء" #: ../../harddrake/data.pm:1 #, c-format msgid "Processors" msgstr "المعالجات" #: ../../lang.pm:1 #, c-format msgid "Svalbard and Jan Mayen Islands" msgstr "جزر سفالبارد و جان ماين" #: ../../standalone/drakTermServ:1 #, c-format msgid "No NIC selected!" msgstr "لم يتم اختيار NIC!" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Problems occured during configuration.\n" "Test your connection via net_monitor or mcc. If your connection doesn't " "work, you might want to relaunch the configuration." msgstr "" "ظهرت مشاكل أثناء التثبيت.\n" "اختبر الوصلة باستخدام net_monitor أو mcc. اذا لم تعمل الوصلة, فقد تريد اعادة " "التهيئة." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "partition %s is now known as %s" msgstr "التجزئة %s معروفة الآن بالإسم %s" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup Other files..." msgstr "انسخ ملفات أخرى..." #: ../../lang.pm:1 #, c-format msgid "Congo (Kinshasa)" msgstr "الكونغو كينشاسا" #: ../../printer/printerdrake.pm:1 #, c-format msgid "SMB server IP" msgstr "IP خادم SMB" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "جدول اتتقسيم للقرص %s سيتم كتابته الى القرص!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing HPOJ package..." msgstr "جاري تهيئة حزمة HPOJ..." #: ../../any.pm:1 #, c-format msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "LILO (or grub) on your system, or another operating system removes LILO, or " "LILO doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures. Would you like to create a bootdisk for your system?\n" "%s" msgstr "" "قرص اقلاع مخصص يوفر طريقة للوصول الى نظام Linux الخاص بك دون\n" "الإعتماد على محمّل الإقلاع الإعتيادي. هذا مفيد اذا لم تكن تريد تثبيت\n" "LILO (أو grub) على نظامك, أو اذا أزال نظام تشغيل آخر LILO, أو اذا لم يتوافق " "LILO\n" "مع تهيئة نظامك. يمكن كذلك استخدام قرص اقلاع مخصص مع\n" "Mandrake rescue image, مما يجعل المعالجة من انهيارات النظام الخطيرة أكثر " "سهولة.\n" "هل تريد عمل قرص اقلاع لنظامك؟\n" "%s" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " DrakBackup Daemon Report\n" msgstr "" "\n" " تقرير مراقب DrakBackup\n" #: ../../keyboard.pm:1 #, c-format msgid "Latvian" msgstr "اللاتفية" #: ../../standalone/drakbackup:1 #, c-format msgid "monthly" msgstr "شهريا" #: ../../../move/move.pm:1 #, fuzzy, c-format msgid "Retry" msgstr "استعادة" #: ../../standalone/drakfloppy:1 #, c-format msgid "Module name" msgstr "اسم الوحدة" #: ../../network/network.pm:1 #, c-format msgid "Start at boot" msgstr "ابدأ عند الإقلاع" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Incremental Backups" msgstr "استخدم النسخ التراكمي" #: ../../any.pm:1 #, c-format msgid "First sector of drive (MBR)" msgstr "القطاع الأول من القرص (MBR)" #: ../../lang.pm:1 #, c-format msgid "El Salvador" msgstr "السلفادور" #: ../../harddrake/data.pm:1 #, c-format msgid "Joystick" msgstr "عصا الألعاب" #: ../../standalone/harddrake2:1 #, c-format msgid "DVD" msgstr "DVD" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Use Unicode by default" msgstr "استخدم يونيكود افتراضياً" #: ../../standalone/harddrake2:1 #, c-format msgid "the module of the GNU/Linux kernel that handles the device" msgstr "وحدة نواة Linux التي تتعامل مع هذا الجهاز" #: ../../standalone/drakclock:1 #, fuzzy, c-format msgid "Is your hardware clock set to GMT?" msgstr "ساعة الجهاز مضبوطة على توقيت غرينتش" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Trying to rescue partition table" msgstr "جاري محاولة انقاذ جدول التقسيم" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Option %s must be an integer number!" msgstr "الخيار %s يجب أن يكون رقما صحيحاً!" #: ../../security/l10n.pm:1 #, c-format msgid "Use password to authenticate users" msgstr "استخدم كلمة المرور للمصادقة على المستخدمين" #: ../../interactive/stdio.pm:1 #, c-format msgid "" "Entries you'll have to fill:\n" "%s" msgstr "" "Entries you'll have to fill:\n" "%s" #: ../../standalone/drakbackup:1 #, c-format msgid "" "For backups to other media, files are still created on the hard drive, then " "moved to the other media. Enabling this option will remove the hard drive " "tar files after the backup." msgstr "" #: ../../standalone/livedrake:1 #, c-format msgid "Unable to start live upgrade !!!\n" msgstr "لم أتمكن من بدء الترقية الحية !!!\n" #: ../../install_steps_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Name: " msgstr "الاسم: " #: ../../standalone/drakconnect:1 #, c-format msgid "up" msgstr "" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "16 million colors (24 bits)" msgstr "16 مليون لون (24 بت)" #: ../../any.pm:1 #, c-format msgid "Allow all users" msgstr "اسمح لكل المستخدمين" #: ../advertising/08-store.pl:1 #, c-format msgid "The official MandrakeSoft Store" msgstr "متجر MandrakeSoft الرسمي" #: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Resizing" msgstr "جاري تغيير الحجم" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Enter the maximum size\n" " allowed for Drakbackup (MB)" msgstr "" "فضلاً أدخل الحجم الأقصى\n" " المسموح به لـDrakbackup (ميغابايت)" #: ../../network/netconnect.pm:1 #, c-format msgid "Cable connection" msgstr "وصلة كيبل" #: ../../standalone/drakperm:1 ../../standalone/logdrake:1 #, c-format msgid "User" msgstr "المستخدم" #: ../../standalone/drakbackup:1 #, c-format msgid "Do new backup before restore (only for incremental backups.)" msgstr "قم بنسخ احتياطي جديد فبل الإستعادة (فقط للنسخ الإحتياطية المتدرجة)" #: ../../raid.pm:1 #, c-format msgid "mkraid failed" msgstr "فشل mkraid" #: ../../standalone/harddrake2:1 #, c-format msgid "Name" msgstr "الاسم" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Button 3 Emulation" msgstr "محاكاة الزر 3" #: ../../security/l10n.pm:1 #, c-format msgid "Check additions/removals of sgid files" msgstr "تحقق من اضافات/حذف ملفات sgid" #: ../../standalone/drakbackup:1 #, c-format msgid "Sending files..." msgstr "جاري ارسال الملفات..." #: ../../keyboard.pm:1 #, c-format msgid "Israeli (Phonetic)" msgstr "العبرية (صوتية)" #: ../../any.pm:1 #, c-format msgid "access to rpm tools" msgstr "الوصول الى أدوات rpm" #: ../../printer/printerdrake.pm:1 #, c-format msgid "You must choose/enter a printer/device!" msgstr "يجب عليك ادخال/اختيار طابعة/جهاز" #: ../../standalone/drakbackup:1 #, c-format msgid "Permission problem accessing CD." msgstr "توجد مشكلة في التصريح للوصول الى القرص المدمج." #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Phone number" msgstr "رقم التّليفون " #: ../../harddrake/sound.pm:1 #, c-format msgid "Error: The \"%s\" driver for your sound card is unlisted" msgstr "خطأ: مشغل \"%s\" لبطاقة الصوت الخاصة بك غير موجود في القائمة" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer name, description, location" msgstr "اسم الطابعة, وصف, المكان" #: ../../standalone/drakxtv:1 #, c-format msgid "USA (broadcast)" msgstr "الولايات المتّحدة الأمريكيّة (broadcast)" #: ../../Xconfig/card.pm:1 #, c-format msgid "Use Xinerama extension" msgstr "استخدام امتداد Xinerama" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Loopback" msgstr "Loopback" #: ../../standalone/drakxtv:1 #, c-format msgid "West Europe" msgstr "أوروبّا الغربيّة" #: ../../standalone/drakbackup:1 #, c-format msgid "On CD-R" msgstr "على القرص المدمج" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTIONS] [PROGRAM_NAME]\n" "\n" "OPTIONS:\n" " --help - print this help message.\n" " --report - program should be one of mandrake tools\n" " --incident - program should be one of mandrake tools" msgstr "" "[OPTIONS] [PROGRAM_NAME]\n" "\n" "OPTIONS:\n" " --help - print this help message.\n" " --report - program should be one of mandrake tools\n" " --incident - program should be one of mandrake tools" #: ../../standalone/harddrake2:1 #, c-format msgid "Harddrake2 version %s" msgstr "Harddrake2 الإصدار %s" #: ../../standalone/drakfloppy:1 #, c-format msgid "Preferences" msgstr "تفضيلات" #: ../../lang.pm:1 #, c-format msgid "Swaziland" msgstr "سوازيلاند" #: ../../lang.pm:1 #, c-format msgid "Dominican Republic" msgstr "جمهورية الدومينيكان" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Copying %s" msgstr "جاري نسخ %s" #: ../../standalone/draksplash:1 #, c-format msgid "Choose color" msgstr "إختر اللون" #: ../../keyboard.pm:1 #, c-format msgid "Syriac" msgstr "السريانية" #: ../../standalone/drakperm:1 #, c-format msgid "Set-UID" msgstr "Set-UID" #: ../../help.pm:1 #, c-format msgid "" "Choose the hard drive you want to erase in order to install your new\n" "Mandrake Linux partition. Be careful, all data present on this partition\n" "will be lost and will not be recoverable!" msgstr "" "اختر القرص الصلب الذي تريد محوه لتثبيت\n" "تجزئة Mandrake Linux الجديدة. خذ حذرك, كل البيانات الموجود عليه ستضيع\n" "و لن يمكن استعادتها!" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "Use the %c and %c keys for selecting which entry is highlighted." msgstr "Use the %c and %c keys for selecting which entry is highlighted." #: ../../mouse.pm:1 #, c-format msgid "Generic 2 Button Mouse" msgstr "Generic 2 Button Mouse" #: ../../standalone/drakperm:1 #, c-format msgid "Enable \"%s\" to execute the file" msgstr "" #: ../../lvm.pm:1 #, c-format msgid "Remove the logical volumes first\n" msgstr "احذف logical volumes أولاً\n" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "The highlighted entry will be booted automatically in %d seconds." msgstr "The highlighted entry will be booted automatically in %d seconds." #: ../../standalone/drakboot:1 #, c-format msgid "" "Can't write /etc/sysconfig/bootsplash\n" "File not found." msgstr "" "تعذرت كتابة /etc/sysconfig/bootsplash\n" "لم يتم ايجاد الملف." #: ../../standalone/drakconnect:1 #, c-format msgid "Internet access" msgstr "الدخول الى الإنترنت" #: ../../standalone/draksplash:1 #, c-format msgid "" "y coordinate of text box\n" "in number of characters" msgstr "" "الإحداثي الصادي للصندوق النصي\n" "بعدد الحروف" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To get a list of the options available for the current printer click on the " "\"Print option list\" button." msgstr "" "للحصول على قائمة بالخيارات المتوفرة للطابعة المختارة اضغط على زر \"قائمة " "خيارات الطابعة\"." #: ../../standalone/drakgw:1 #, c-format msgid "Enabling servers..." msgstr "جاري تمكين الخوادم..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing test page(s)..." msgstr "جاري طباعة الصفحات الإختبارية..." #: ../../standalone/drakbackup:1 #, c-format msgid "" "Transfer successful\n" "You may want to verify you can login to the server with:\n" "\n" "ssh -i %s %s@%s\n" "\n" "without being prompted for a password." msgstr "" "تم النقل بنجاح\n" "ربما تريد التحقق اذا كان يمكنك الدخول الى خادم بالأمر:\n" "\n" "ssh -i %s %s@%s\n" "\n" "دون تنبيهك الى ادخال كلمة مرور." #: ../../fsedit.pm:1 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "هناك تجزئة مع نقطة التحميل %s مسبقاً\n" #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable msec hourly security check." msgstr "تمكين/تعطيل اختبارات msec الأمنية كل ساعة" #: ../../help.pm:1 #, c-format msgid "" "At this point, you need to decide where you want to install the Mandrake\n" "Linux operating system on your hard drive. If your hard drive is empty or\n" "if an existing operating system is using all the available space you will\n" "have to partition the drive. Basically, partitioning a hard drive consists\n" "of logically dividing it to create the space needed to install your new\n" "Mandrake Linux system.\n" "\n" "Because the process of partitioning a hard drive is usually irreversible\n" "and can lead to lost data if there is an existing operating system already\n" "installed on the drive, partitioning can be intimidating and stressful if\n" "you are an inexperienced user. Fortunately, DrakX includes a wizard which\n" "simplifies this process. Before continuing with this step, read through the\n" "rest of this section and above all, take your time.\n" "\n" "Depending on your hard drive configuration, several options are available:\n" "\n" " * \"%s\": this option will perform an automatic partitioning of your blank\n" "drive(s). If you use this option there will be no further prompts.\n" "\n" " * \"%s\": the wizard has detected one or more existing Linux partitions on\n" "your hard drive. If you want to use them, choose this option. You will then\n" "be asked to choose the mount points associated with each of the partitions.\n" "The legacy mount points are selected by default, and for the most part it's\n" "a good idea to keep them.\n" "\n" " * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n" "all the space available on it, you will have to create free space for\n" "Linux. To do so, you can delete your Microsoft Windows partition and data\n" "(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n" "partition. Resizing can be performed without the loss of any data, provided\n" "you have previously defragmented the Windows partition and that it uses the\n" "FAT format. Backing up your data is strongly recommended.. Using this\n" "option is recommended if you want to use both Mandrake Linux and Microsoft\n" "Windows on the same computer.\n" "\n" " Before choosing this option, please understand that after this\n" "procedure, the size of your Microsoft Windows partition will be smaller\n" "then when you started. You will have less free space under Microsoft\n" "Windows to store your data or to install new software.\n" "\n" " * \"%s\": if you want to delete all data and all partitions present on\n" "your hard drive and replace them with your new Mandrake Linux system,\n" "choose this option. Be careful, because you will not be able to undo your\n" "choice after you confirm.\n" "\n" " !! If you choose this option, all data on your disk will be deleted. !!\n" "\n" " * \"%s\": this will simply erase everything on the drive and begin fresh,\n" "partitioning everything from scratch. All data on your disk will be lost.\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"%s\": choose this option if you want to manually partition your hard\n" "drive. Be careful -- it is a powerful but dangerous choice and you can very\n" "easily lose all your data. That's why this option is really only\n" "recommended if you have done something like this before and have some\n" "experience. For more instructions on how to use the DiskDrake utility,\n" "refer to the ``Managing Your Partitions '' section in the ``Starter\n" "Guide''." msgstr "" "في هذه النقطة, عليك أن تقرر أين تريد تثبيت نظام\n" "التشغيل Mandrake Linux على القرص الصلب الخاص بك. اذا كان القرص الصلب\n" "قارغاً أو أن نظام تشغيل آخر يستخدم كل المساحة المتوفرة فسوف\n" "تحتاج الى تجزئة القرص الصلب. بشكل عام,. فإن تجزئةالقرص الصلب\n" "تعني تقسيم القرص الصلب منطقياً لإنشاء المساحة المطلوبة لتثبيت\n" "نظام Mandrake Linux الجديد الخاص بك.\n" "\n" "لأن عملية تقسيم القرص الصلب غير قابلة للتراجع عادةًَ\n" "كما أنها قد تتسبب في خسارة للبيانات اذا كان هناك نظام تشغيل\n" "آخر مثبت على هذا القرص الصلب, تجزئة القرص قد يكون مزعجاً و مثيراً للضغط\n" "اذا كنت مستخدماً محترقاً. من حسن الحظ, يوفر DrakX معالجاً يسهل العملية.\n" "قبل متابعة هذه الخطوة, اقرأ بقية هذا القسم و قبل كل شئ, خذ وقتك.\n" "\n" "اعتماداً على اعدادات القرص الصلب, تتوفر العديد من الخيارات:\n" "\n" " * \"%s\": هذا الخيار سيقوم بعملية تجزئة آلية\n" "للأقراص الصلبة الفارغة. اذا استخدمت هذا الخيار, لن تكون هناك اشعارات\n" "أخرى.\n" " * \"%s\": يكون المعالج قد اكتشف تجزئة أو أكثر من\n" "تجزئات Linux على القرص الصلب. اذا كنت تريد استخدامها, اختر هذا\n" "الخيار. سيتم بعد ذلك سؤالك عن نقاط التحميل المرتبطة بكل\n" "تجزئة. يتم اختيار نقاط التجزئة المعتادة افتراضياً,\n" "و لأغلب المستخدمين فإنها فكرة جيدة تركها كما هي.\n" "\n" " * \"%s\": اذا كان Microsoft Windows مثبت على القرص الصلب و يحتل كل المساحة " "التي عليه,\n" "ستحتاج الى انشاء مساحة فارغة لبيانات Linux. لعمل ذلك يمكنك حذف\n" "تجزئة و بيانات Microsoft Windows (انظر حل ``ازالة كل القرص'')\n" "أو قم بإعادة تحجيم تجزئة Microsoft Windows FAT. يمكن عمل اعادة التحجيم\n" "دون أي خسارة للبيانات, لكن يجب عليك قبل ذلك بإزالة تجزئة القرص " "(defragmenting)\n" "الذي يستخدم تنسيق FAT. نسخ بياناتك احتياطياً يفضّل\n" "بشدة.. استخدام هذا الخيار منصوح به اذا كنت تريد استخدام \n" "كل من Mandrake Linux و Microsoft Windows على نفس الكمبيوتر.\n" "\n" " قبل اختيارك لهذا الخيار, عليك أن تعلم أنه بعد هذا\n" "الإجراء, ستتقلص مساحة تجزئة Microsoft Windows عن ما قبل\n" "ستكون لديك مساحة فارغة أقل على Microsoft Windows\n" "لتخزين بياناتك و تثبيت برامج جديدة.\n" "\n" " * \"%s\": اذا كنت تريد حذف كل البيانات و كل التجزئات\n" "الموجودة على القرص الصلب و ابدالها بنظام Mandrake Linux الجديد\n" "الخاص بك, اختر هذا الخيار. كن حذراً, لأنك لن تتمكن من التراجع\n" "بعد أن تقوم بالتأكيد.\n" "\n" " !!! اذا اخترت هذا الخيار سيتم حذف كل البيانات الموجودة على القرص. !!\n" "\n" " * \"%s\": سيقوم هذا الخيار ببساطة بمحو كل شء على القرص و\n" "يبدأ التثبيت من الصفر. ستضيع كل البيانات على\n" "القرص.\n" "\n" " * \"%s\": اختر هذا الخيار اذا كنت تريد\n" "تقسيم القرص الصلب بشكل يدوي. كن حذراً -- هذا الخيار قوي\n" "لكنه خطير و من الممكن أن تفقد بياناتك بسهولة. لهذا فإن\n" "هذا الخيار مفضّل فقط اذا كنت قد قمت بشئ مماثل من فبل \n" "و لديك بعض الخبرة. لمزيد من التعليمات حول استخدام أداة DiskDrake\n" "راجع قسم ``ادارة التجزئات'' في\n" "``دليل المبتدئ''." #: ../../lang.pm:1 #, c-format msgid "Ukraine" msgstr "أوكرانيا" #: ../../standalone/drakbug:1 #, c-format msgid "Application:" msgstr "التطبيق:" #: ../../network/isdn.pm:1 #, c-format msgid "External ISDN modem" msgstr "مودم ISDN خارجي" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, report check result by mail." msgstr "if set to yes, report check result by mail." #: ../../interactive/stdio.pm:1 #, c-format msgid "Your choice? (default %s) " msgstr "اختيارك؟ (الافتراضي %s) " #: ../../harddrake/sound.pm:1 #, c-format msgid "Trouble shooting" msgstr "حل المشاكل" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" "Printing status:\n" "%s\n" "\n" msgstr "" "تم ارسال الصفحات الإختبارية الى الطابعة.\n" "قد يستغرق هذا بعض الوقت حتى تبدأ الطابعة.\n" "حالة الطباعة:\n" "%s\n" "\n" #: ../../standalone/drakbackup:1 #, c-format msgid "daily" msgstr "يوميّاً" #: ../../printer/printerdrake.pm:1 #, c-format msgid "and one unknown printer" msgstr "و طابعة غير معروفة" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "Ireland" msgstr "أيرلندا" #: ../../standalone/drakbackup:1 #, c-format msgid " Restore Configuration " msgstr " تهيئة الإستعادة " #: ../../Xconfig/test.pm:1 #, c-format msgid "Is this the correct setting?" msgstr "هل هذا هو الإعداد الصحيح؟" #: ../../help.pm:1 #, c-format msgid "" "You will now set up your Internet/network connection. If you wish to\n" "connect your computer to the Internet or to a local network, click \"%s\".\n" "Mandrake Linux will attempt to autodetect network devices and modems. If\n" "this detection fails, uncheck the \"%s\" box. You may also choose not to\n" "configure the network, or to do it later, in which case clicking the \"%s\"\n" "button will take you to the next step.\n" "\n" "When configuring your network, the available connections options are:\n" "traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n" "simple LAN connection (Ethernet).\n" "\n" "We will not detail each configuration option - just make sure that you have\n" "all the parameters, such as IP address, default gateway, DNS servers, etc.\n" "from your Internet Service Provider or system administrator.\n" "\n" "You can consult the ``Starter Guide'' chapter about Internet connections\n" "for details about the configuration, or simply wait until your system is\n" "installed and use the program described there to configure your connection." msgstr "" "ستقوم الآن بإعداد وصلة الإنترنت/الشبكة الخاصة بك. اذا كنت تريد\n" "توصيل جهازك بالإنترنت أو للشبكة المحلية, انقر \"%s\"\n" "سيحاول Mandrake Linux أن يتحقق آلياً من وجود الأجهزة و المودمات.\n" "اذا فشل التحقق, أزل التأشبر من \"%s\". ربما تختار\n" "عدم تهيئة الشبكة, أو تريد أن تفعل ذلك, في هذه الحال\n" "فإن ضغط زر \"%s\" سيأخذك الى الخطوة التالية.\n" "\n" "أثناء تهيئة الشبكة, فإن خيارات التوصيل المتوفرة هي:\n" "مودم تقليدي, مودم ISDN, وصلة ADSL, مودم كيبل, و أخيراً\n" "وصلة LAN بسيطة (ايثرنت).\n" "\n" "لن نذكر كل خيارات التهيئة بالتفصيل - فقط تأكد أنه لديك\n" "كل المعاملات, مثل عنوان IP, البوابة الإفتراضية, خادمات DNS, الخ.\n" "من موفر خدمة الإنترنت أو مدير النظام.\n" "\n" "يمكنك الرجوع الى الفصل الخاص بإعداد وصلة الإنترنت في\n" "``دليل المبتدئ'' للتفاصيل حول التهيئة, أو ببساطة انتظر حتى يتم\n" "تثبيت النظام و استخدم البرنامج المذكور هناك لإعداد الوصلة." #: ../../standalone/drakbackup:1 #, c-format msgid "Wizard Configuration" msgstr "إعدادات المعالج" #: ../../modules/interactive.pm:1 #, c-format msgid "Autoprobe" msgstr "تحقق آلي" #: ../../security/help.pm:1 #, c-format msgid "" "if set to yes, check for :\n" "\n" "- empty passwords,\n" "\n" "- no password in /etc/shadow\n" "\n" "- for users with the 0 id other than root." msgstr "" "اذا كانت القيمة نعم, تحقق من :\n" "\n" "- كلمات المرور الفارغة,\n" "\n" "- عدم وجود كلمة مرور في /etc/shadow\n" "\n" "- وجود مستخدمين برقم معرف 0 غير المستخدم الجذر." #: ../../standalone/drakbackup:1 #, c-format msgid "Backup system files..." msgstr "انسخ ملفات النظام..." #: ../../any.pm:1 #, c-format msgid "Can't use broadcast with no NIS domain" msgstr "Can't use broadcast with no NIS domain" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Removing printer \"%s\"..." msgstr "جاري ازالة الطابعة \"%s\" ..." #: ../../security/l10n.pm:1 #, c-format msgid "Shell history size" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "drakfloppy" msgstr "دريك للاقراص المرنة" #: ../../standalone/drakpxe:1 #, c-format msgid "" "Please indicate where the auto_install.cfg file is located.\n" "\n" "Leave it blank if you do not want to set up automatic installation mode.\n" "\n" msgstr "" "فضلاً حدد مكان ملف auto_install.cfg.\n" "\n" "اترك الحقل فارغاً اذا لم تكن تريد اعاد وضع التثبيت الالي.\n" #: ../../printer/cups.pm:1 ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Configured on other machines" msgstr "قم بإعداد الإتصال" #: ../../standalone/harddrake2:1 #, c-format msgid "information level that can be obtained through the cpuid instruction" msgstr "مستوى المعلومات التي يمكن الحصول عليها من تعليمات cpuid" #: ../../lang.pm:1 #, c-format msgid "Peru" msgstr "بيرو" #: ../../standalone/drakbackup:1 #, c-format msgid " on device: %s" msgstr " على الجهاز: %s" #: ../../install_interactive.pm:1 #, c-format msgid "Remove Windows(TM)" msgstr "احذف Windows(TM)" #: ../../services.pm:1 #, c-format msgid "Starts the X Font Server (this is mandatory for XFree to run)." msgstr "تبدأ خادم خطوط X (هذا الزامي لكي يعمل XFree)" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "Most of these values were extracted\n" "from your running system.\n" "You can modify as needed." msgstr "" "تم استخراج أغلب هذه القيم\n" "من النظام.\n" "يمكنك التعديل اذا احتجت لذلك." #: ../../standalone/drakfont:1 #, c-format msgid "Select the font file or directory and click on 'Add'" msgstr "اختر ملف أو دليل الخطوط و اضغط 'اضافة'" #: ../../lang.pm:1 #, c-format msgid "Madagascar" msgstr "مدغشقر" #: ../../standalone/drakbug:1 #, c-format msgid "Urpmi" msgstr "Urpmi" #: ../../standalone/drakbackup:1 #, c-format msgid "Cron not available yet as non-root" msgstr "Cron غير متوفر حتى الآن للمستخدمين غير الجذر" #: ../../install_steps_interactive.pm:1 ../../services.pm:1 #: ../../standalone/drakbackup:1 #, c-format msgid "System" msgstr "النظام" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Do you want to use this feature?" msgstr "هل تريد استخدام هذه الميزة؟" #: ../../keyboard.pm:1 #, c-format msgid "Arabic" msgstr "العربية" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Options:\n" msgstr "" "\n" "- خيارات:\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Password required" msgstr "يُحتاج الى كلمة المرور" #: ../../common.pm:1 #, c-format msgid "%d minutes" msgstr "%d دقائق" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Graphics card: %s" msgstr "بطاقة الشاشة: %s" #: ../../standalone/drakbackup:1 #, c-format msgid "WebDAV transfer failed!" msgstr "فشلت عملية نقل WebDAV!" #: ../../Xconfig/card.pm:1 #, c-format msgid "XFree configuration" msgstr "إعداد XFree" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Choose action" msgstr "اختر حدث" #: ../../lang.pm:1 #, c-format msgid "French Polynesia" msgstr "بولينيسيا الفرنسية" #: ../../help.pm:1 #, c-format msgid "" "Usually, DrakX has no problems detecting the number of buttons on your\n" "mouse. If it does, it assumes you have a two-button mouse and will\n" "configure it for third-button emulation. The third-button mouse button of a\n" "two-button mouse can be ``pressed'' by simultaneously clicking the left and\n" "right mouse buttons. DrakX will automatically know whether your mouse uses\n" "a PS/2, serial or USB interface.\n" "\n" "If for some reason you wish to specify a different type of mouse, select it\n" "from the list provided.\n" "\n" "If you choose a mouse other than the default, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct and that the mouse is working correctly. If the mouse is not\n" "working well, press the space bar or [Return] key to cancel the test and to\n" "go back to the list of choices.\n" "\n" "Wheel mice are occasionally not detected automatically, so you will need to\n" "select your mouse from a list. Be sure to select the one corresponding to\n" "the port that your mouse is attached to. After selecting a mouse and\n" "pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n" "the mouse wheel to ensure that it is activated correctly. Once you see the\n" "on-screen scroll wheel moving as you scroll your mouse wheel, test the\n" "buttons and check that the mouse pointer moves on-screen as you move your\n" "mouse." msgstr "" #: ../../services.pm:1 #, c-format msgid "Support the OKI 4w and compatible winprinters." msgstr "دعم طابعات OKI 4w و الطابعات المتوافقة." #: ../../standalone/drakbackup:1 #, c-format msgid "" "Files or wildcards listed in a .backupignore file at the top of a directory " "tree will not be backed up." msgstr "" #: ../../services.pm:1 #, c-format msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "تشغّل نظام الصوت ALSA (Advanced Linux Sound Arachitecture)" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: ../../modules/interactive.pm:1 #, c-format msgid "Installing driver for %s card %s" msgstr "جاري تثبيت مشغل %s للبطاقة %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You have transferred your former default printer (\"%s\"), Should it be also " "the default printer under the new printing system %s?" msgstr "" "لقد قمت بنقل الطابعة الإفتراضية السابقة (\"%s\"), هل يجب أيضاً أن تكون " "الطابعة الإفتراضية تحت نظام الطباعة الجديد %s؟" #: ../../standalone/drakTermServ:1 #, c-format msgid "Enable Server" msgstr "مكّن الخادم" #: ../../keyboard.pm:1 #, c-format msgid "Ukrainian" msgstr "الأوكرانية" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The network access was not running and could not be started. Please check " "your configuration and your hardware. Then try to configure your remote " "printer again." msgstr "" "الوصول الى الشبكة لا يعمل و لم يمكن بدؤه. فضلاً تأكد من التهيئة لديك و العتاد " "الخاص بك. ثم حاول تهيئة الطابعة البعيدة مرة أخرى." #: ../../standalone/drakperm:1 #, c-format msgid "Enable \"%s\" to write the file" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Please insert the Boot floppy used in drive %s" msgstr "فضلاً أدخل قرص الإقلاع الذي تستخدمه في السواقة %s" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Local network(s)" msgstr "الشبكة/الشبكات المحلية" #: ../../help.pm:1 #, c-format msgid "Remove Windows" msgstr "احذف Windows" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "Your %s has been configured.\n" "You may now scan documents using \"XSane\" from Multimedia/Graphics in the " "applications menu." msgstr "" "تمت تهيئة الماسح الضوئي %s.\n" "يمكنك الآن مسح المستندات باستخدام \"XSane\" من فرع وسائط متعددة/برامج رسومية " "في قائمة التطبيقات." #: ../../harddrake/data.pm:1 #, c-format msgid "Firewire controllers" msgstr "متحكمات Firewire" #: ../../help.pm:1 #, c-format msgid "" "After you have configured the general bootloader parameters, the list of\n" "boot options that will be available at boot time will be displayed.\n" "\n" "If there are other operating systems installed on your machine they will\n" "automatically be added to the boot menu. You can fine-tune the existing\n" "options by clicking \"%s\" to create a new entry; selecting an entry and\n" "clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n" "changes.\n" "\n" "You may also not want to give access to these other operating systems to\n" "anyone who goes to the console and reboots the machine. You can delete the\n" "corresponding entries for the operating systems to remove them from the\n" "bootloader menu, but you will need a boot disk in order to boot those other\n" "operating systems!" msgstr "" "بعدما قمت بتهيئة المعاملات العامة لمحمّل الإقلاع, فسيتم\n" "عرض قائمة خيارات الإقلاع المتوفرة عند بدء التشغيل.\n" "\n" "اذا كانت هناك أنظمة تشغيل أخرى مثبتة على ماكينتك فسيتم اضافتها\n" "آلياً الى قائمة الإقلاع. يمكنك التحكم بالخيارات\n" "الموجودة بنقر \"%s\" لإنشاء مدخل جديد, و اختيار مدخل و\n" "نقر \"%s\" أو \"%s\" لتعديل أو حذف المدخل. \"%s\" يتأكد\n" "من تغييراتك.\n" "\n" "ربما لا تريد لأي شخص يتمكن من اعادة تشغيل الماكينة أن يستطيع\n" "الوصل الى أنظمة التشغيل الأخرى. يمكنك حذف المداخل المقابلة\n" "لأنظمة التشغيل لحذفها من قائمة محمّل الإقلاع, لكن في هذه الحالة ستحتاج الى " "قرص\n" "مرن للإقلاع كي تتمكن من الوصول الى أنظمة\n" "التشغيل الأخرى!" #: ../../standalone/drakboot:1 #, c-format msgid "System mode" msgstr "وضع النظام" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print on a NetWare printer, you need to provide the NetWare print server " "name (Note! it may be different from its TCP/IP hostname!) as well as the " "print queue name for the printer you wish to access and any applicable user " "name and password." msgstr "" "للطباعة على طابعة NetWare, تحتاج الى اعطاء اسم خادم طباعة NetWare (لاحط أنه " "قد يختلف عن اسم مستضيف TCP/IP!) بالإضافة الى اسم الصف للطابعة التي رغب في " "الوصول اليها بالإضافة الى اسم مستخدم و كلمة مرور مناسبتين." #: ../../standalone/drakTermServ:1 #, c-format msgid "Netmask:" msgstr "Netmask:" #: ../../network/adsl.pm:1 #, c-format msgid "Do it later" msgstr "" #: ../../any.pm:1 #, c-format msgid "Append" msgstr "الحاق" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Refresh printer list (to display all available remote CUPS printers)" msgstr "أعد تحميل قائمة الطابعات (لعرض كل طابعات CUPS البعيدة المتوفرة)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "When this option is turned on, on every startup of CUPS it is automatically " "made sure that\n" "\n" "- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n" "\n" "- if /etc/cups/cupsd.conf is missing, it will be created\n" "\n" "- when printer information is broadcasted, it does not contain \"localhost\" " "as the server name.\n" "\n" "If some of these measures lead to problems for you, turn this option off, " "but then you have to take care of these points." msgstr "" "عند تشغيل هذا الخيار, فعند كل بداية تشغيل لـCUPS سيتم التأكد آلياً من ما\n" "\n" "- اذا كان LPD/LPRng مثبتاً, لن تتم الكتابة فوق /etc/printcap عن طريق CUPS\n" "\n" "- اذا كان /etc/cups/cupsd.conf مفقود, سيتم انشاؤه في هذه الحال\n" "\n" "- اذا كانت معلومات الطباعة منشورة, أي أنها لا تحتوي \"localhost\" كإسم " "للخادم.\n" "\n" "اذا كانت بعض هذه الإجراءات قد تسببت بمشاكل لك, عطّل هذا الخيار, لكن في هذه " "الحال عليك الإنتباه لهذه النقاط." #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" "(this is meant for installing on another box).\n" "\n" "You may prefer to replay the installation.\n" msgstr "" "التثبيت الآلي قد يتم بشكل تلقائي اذا أردت ذلك,\n" "في هذه الحالة سيستولي على كل القرص الصلب لديك!!\n" "(هذا بالنسبة للتثبيت على جهاز آخر).\n" "\n" "ربما تفضل اعادة عملية التثبيت.\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Network printer \"%s\", port %s" msgstr "طابعة شبكة \"%s\", المنفذ %s" #: ../../standalone/drakgw:1 #, c-format msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." msgstr "فضلاً اختر موائم الشبكة الذي سيتم به الإتصال بالشبكة المحلية." #: ../../standalone/drakbackup:1 #, c-format msgid "OK to restore the other files." msgstr "اضغط موافق لاستعادة ملفات اخرى" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Please choose your keyboard layout." msgstr "رجاء, اختر لوحة المفاتيح." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer Device URI" msgstr "URI جهاز الطابعة" #: ../../standalone/drakbackup:1 #, c-format msgid "Not erasable media!" msgstr "وسيط غير قابل للمسح!" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Terminal-based" msgstr "Terminal-based" #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable IP spoofing protection." msgstr "تمكين/تعطيل حماية IP spoofing" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing a printing system in the %s security level" msgstr "جاري تثبيت نظام طباعة في مستوى الأمن %s" #: ../../any.pm:1 #, c-format msgid "The user name is too long" msgstr "اسم المستخدم طويل جداً" #: ../../any.pm:1 #, c-format msgid "Other OS (windows...)" msgstr "نظام آخر (Windows...)" #: ../../standalone/drakbackup:1 #, c-format msgid "WebDAV remote site already in sync!" msgstr "موقع WebDAV البعيد متزامن مسبقاً!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Reading printer database..." msgstr "جاري قراءة قاعدة بيانات الطابعات..." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Generate auto install floppy" msgstr "انشئ قرص تثبيت آلي" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\t\t user name: %s\n" "\t\t on path: %s \n" msgstr "" "\t\t اسم المستخدم: %s\n" "\t\t على المسار: %s\n" #: ../../lang.pm:1 #, c-format msgid "Somalia" msgstr "الصومال" #: ../../harddrake/sound.pm:1 #, c-format msgid "No open source driver" msgstr "لا يوجد مشغل مفتوح المصدر" #: ../../standalone/printerdrake:1 #, c-format msgid "Def." msgstr "" #: ../../security/level.pm:1 #, c-format msgid "" "This is similar to the previous level, but the system is entirely closed and " "security features are at their maximum." msgstr "" "هذا مماثل للمستوى السابق, و لكن النظام مغلق كلياً و المزايا الأمني على حدها " "الأقصى." #: ../../lang.pm:1 #, c-format msgid "Nicaragua" msgstr "نيكاراغوا" #: ../../lang.pm:1 #, c-format msgid "New Caledonia" msgstr "نيوكاليدونيا" #: ../../network/isdn.pm:1 #, c-format msgid "European protocol (EDSS1)" msgstr "البروتوكول الأوروبي (EDSS1)" #: ../../standalone/printerdrake:1 #, c-format msgid "/_Delete" msgstr "/_حذف" #: ../../any.pm:1 #, c-format msgid "Video mode" msgstr "وضعية الفيديو" #: ../../lang.pm:1 #, c-format msgid "Oman" msgstr "عمان" #: ../../standalone/logdrake:1 #, c-format msgid "Please enter your email address below " msgstr "فضلاً أدخل عنوان بريدك الألكتروني أدناه " #: ../../standalone/net_monitor:1 #, c-format msgid "Network Monitoring" msgstr "مراقبة الشبكة" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "SunOS" msgstr "SunOS" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "New size in MB: " msgstr "الحجم الجديد بالميغابايت: " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Partition table type: %s\n" msgstr "نوع جدول التقسيم: %s\n" #: ../../any.pm:1 #, c-format msgid "Authentication Windows Domain" msgstr "تحقق نطاق Windows" #: ../../keyboard.pm:1 #, c-format msgid "US keyboard" msgstr "لوحة المفاتيح الأمريكية" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Buttons emulation" msgstr "محاكاة الأزرار" #: ../../printer/printerdrake.pm:1 #, c-format msgid ", network printer \"%s\", port %s" msgstr ", طابعة شبكة \"%s\", المنفذ %s" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Drakbackup activities via tape:\n" "\n" msgstr "" "\n" "نشاطات Drakbackup عن طريق شريط التخزين:\n" "\n" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " FTP connection problem: It was not possible to send your backup files by " "FTP.\n" msgstr "" "\n" " مشكلة في وصلة FTP: لم يكن بالإمكان ارسال ملفات النسخ الإحتياطي الخاصة بك " "باستخدام FTP.\n" #: ../../standalone/net_monitor:1 #, c-format msgid "Sending Speed:" msgstr "سرعة الإرسال:" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "The classic bug sound tester is to run the following commands:\n" "\n" "\n" "- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n" "by default\n" "\n" "- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n" "currently uses\n" "\n" "- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n" "loaded or not\n" "\n" "- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n" "tell you if sound and alsa services're configured to be run on\n" "initlevel 3\n" "\n" "- \"aumix -q\" will tell you if the sound volume is muted or not\n" "\n" "- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n" msgstr "" "The classic bug sound tester is to run the following commands:\n" "\n" "\n" "- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n" "by default\n" "\n" "- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n" "currently uses\n" "\n" "- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n" "loaded or not\n" "\n" "- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n" "tell you if sound and alsa services're configured to be run on\n" "initlevel 3\n" "\n" "- \"aumix -q\" will tell you if the sound volume is muted or not\n" "\n" "- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n" #: ../../standalone/harddrake2:1 #, c-format msgid "Halt bug" msgstr "Halt bug" #: ../../standalone/logdrake:1 #, c-format msgid "Mail alert configuration" msgstr "تهيئة تنبيه البريد" #: ../../lang.pm:1 #, c-format msgid "Tokelau" msgstr "توكلاو" #: ../../standalone/logdrake:1 #, c-format msgid "Matching" msgstr "الموائمة" #: ../../keyboard.pm:1 #, c-format msgid "Bosnian" msgstr "البوسنية" #: ../../standalone/drakbug:1 #, c-format msgid "Release: " msgstr "الإصدار:" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Connection speed" msgstr "سرعة الإتصال" #: ../../lang.pm:1 #, c-format msgid "Namibia" msgstr "ناميبيا" #: ../../services.pm:1 #, c-format msgid "Database Server" msgstr "خادم قواعد بيانات" #: ../../standalone/harddrake2:1 #, c-format msgid "special capacities of the driver (burning ability and or DVD support)" msgstr "امكانيات مميزة لهذا المشغل (امكانية النسخ أو دعم DVD)" #: ../../raid.pm:1 #, c-format msgid "Can't add a partition to _formatted_ RAID md%d" msgstr "لا يمكن اضافة تجزئة الى RAID _المجهز_ md%d" #: ../../standalone/drakclock:1 #, fuzzy, c-format msgid "Network Time Protocol" msgstr "واجهة الشبكة " #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "يمكن لبطاقتك التمتع بدعم للتسريع ثلاثي الأبعاد لكن فقط مع XFree %s, \n" "لاحظ أن هذا الدعم تجريبي و قد يتسبب في ايقاف جهازك.\n" "بطاقتك مدعومة عن طريق XFree %s التي يمكن أن تكون مدعومة بشكل أفضل في وضعية " "الرسوم ثنائية الأبعاد." #: ../../standalone/draksec:1 #, c-format msgid "Please wait, setting security options..." msgstr "انتظر من فضلك, جاري تعيين خيارات الأمن..." #: ../../harddrake/v4l.pm:1 #, c-format msgid "Unknown|CPH05X (bt878) [many vendors]" msgstr "غير معروف|CPH05X (bt878) [مصنعون كثيرون]" #: ../../standalone/drakboot:1 #, c-format msgid "Launch the graphical environment when your system starts" msgstr "شغّل X-Window عند بدء التشغيل" #: ../../standalone/drakbackup:1 #, c-format msgid "hourly" msgstr "كلّ ساعة " #: ../../keyboard.pm:1 #, c-format msgid "Right Shift key" msgstr "مفتاح Shift الأيمن" #: ../../standalone/drakbackup:1 #, c-format msgid " Successfuly Restored on %s " msgstr " تمت الإستعادة بنجاح على %s " #: ../../printer/printerdrake.pm:1 #, c-format msgid "Making printer port available for CUPS..." msgstr "جاري جعل منفذ الطابعة متوفراً لـCUPS..." #: ../../lang.pm:1 #, c-format msgid "Antigua and Barbuda" msgstr "أنتيغوا و باربودا" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "!!! Indicates the password in the system database is different than\n" " the one in the Terminal Server database.\n" "Delete/re-add the user to the Terminal Server to enable login." msgstr "" "!!! تظهر اذا كانت كلمة المرور في قاعدة بيانات النظام مختلفة\n" "عن تلك التي لقاعدة بيانات خادم الطرفيات.\n" "احذف/أعد اضافة المستخدم الى خادم الطرفيات لتمكين تسجيل الدخول." #: ../../keyboard.pm:1 #, c-format msgid "Spanish" msgstr "الإسبانية" #: ../../services.pm:1 #, c-format msgid "Start" msgstr "ابدأ" #: ../../security/l10n.pm:1 #, c-format msgid "Direct root login" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Configuring applications..." msgstr "جاري إعداد التطبيقات..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer, connected directly to the network or to a remote Windows machine.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/" "they can be auto-detected. Also your network printer(s) and your Windows " "machines must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network and/or Windows-hosted printers when you don't need " "it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "أهلاً بكم في معالج اعداد الطابعات\n" "هذا المعالج سيساعدك على تثبيت الطابعة/الطابعات الموصولة بهذا الكمبيوتر أو " "الموصولة مباشرةً بالشبكة أو بماكينة Windows بعيدة.\n" "\n" "اذا كانت لديك طابعة/طابعات موصولة بهذه الماكينة, فضلاً قم بتوصيلها الى هذا " "الكمبيوتر و قم بتشغيلها كي يتم التحقق منها/منهم آلياً. أيضاً يجب أن تكون طابعة/" "طابعات الشبكة و أجهزة Windows موصولة و مشغّلة.\n" "\n" "لاحظ أن التحقق الآلي من الطابعات على الشبكة قد يستغرق وقتاً أطول من التحقق " "الآلي من الطابعات الموصولة بهذه الماكينة فقط. لذا قم بتعطيل التحقق الآلي من " "طابعات الشبكة و/أو الطابعات المستضافة من Windows اذا لم تكن تحتاج الى هذه " "الميزة.\n" "\n" " انقر \"التالي\" عندما تكون مستعداً, و على \"الغاء\" اذا لم تكن تريد اعداد " "الطابعة/الطابعات الآن." #: ../../network/netconnect.pm:1 #, c-format msgid "Normal modem connection" msgstr "وصلة مودم عادية" #: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 #, c-format msgid "File Selection" msgstr "اختيار الملفات" #: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1 #, c-format msgid "CUPS" msgstr "CUPS" #: ../../standalone/drakbackup:1 #, c-format msgid "Erase tape before backup" msgstr "امسح الشريط قبل النسخ الاحتياطي" #: ../../standalone/harddrake2:1 #, c-format msgid "Run config tool" msgstr "شغّل أداة التهيئة" #: ../../any.pm:1 #, c-format msgid "Bootloader installation" msgstr "تثبيت محمل الإقلاع" #: ../../install_interactive.pm:1 #, c-format msgid "Root partition size in MB: " msgstr "حجم التجزئة الجذرية بالميغابايت" #: ../../install_steps_gtk.pm:1 #, c-format msgid "This is a mandatory package, it can't be unselected" msgstr "هذه الحزمة الزامية, لا يمكن عدم اختيارها" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Create etherboot floppies/CDs:\n" " \tThe diskless client machines need either ROM images on the NIC, or " "a boot floppy\n" " \tor CD to initate the boot sequence. drakTermServ will help " "generate these\n" " \timages, based on the NIC in the client machine.\n" " \t\t\n" " \tA basic example of creating a boot floppy for a 3Com 3c509 " "manually:\n" " \t\t\n" " \tcat /usr/lib/etherboot/boot1a.bin \\\n" " \t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Etherboot ISO image is %s" msgstr "Etherboot ISO image هي %s" #: ../../services.pm:1 #, c-format msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve host " "names to IP addresses." msgstr "" "named (BIND) هو خادم أسماء نطاق (DNS) و الذي يستخدم لمعرفة أسماء المستضيفات " "أو عناوين IP." #: ../../lang.pm:1 #, c-format msgid "Saint Lucia" msgstr "سانت لوسيا" #: ../../standalone/drakbackup:1 #, c-format msgid "November" msgstr "نوفمبر" #: ../../standalone/drakconnect:1 #, c-format msgid "Disconnect..." msgstr "اقطع الإتصال..." #: ../../standalone/drakbug:1 #, c-format msgid "Report" msgstr "تقرير" #: ../../lang.pm:1 #, c-format msgid "Palau" msgstr "بالاو" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "level" msgstr "المستوى" #: ../advertising/13-mdkexpert_corporate.pl:1 #, c-format msgid "" "All incidents will be followed up by a single qualified MandrakeSoft " "technical expert." msgstr "كل مشكلة سيتم تتبعها من خبير واحد معتمد من MandrakeSoft." #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Package Group Selection" msgstr "اختيار مجموعات الحزم" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "Allow local hardware\n" "configuration." msgstr "" "اسمح بالتهيئة المحلية\n" "للعتاد" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Via Network Protocol: %s" msgstr "استعد عن طريق بروتوكول الشبكة: %s" #: ../../modules/interactive.pm:1 #, c-format msgid "You can configure each parameter of the module here." msgstr "يمكنك تهيئة كل معامل للوحدة هنا." #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Choose the resolution and the color depth" msgstr "اختر دقة العرض و عمق الألوام" #: ../../standalone/mousedrake:1 #, c-format msgid "Emulate third button?" msgstr "محاكاة الزر الثالث؟" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "You can't create a new partition\n" "(since you reached the maximal number of primary partitions).\n" "First remove a primary partition and create an extended partition." msgstr "" "لا يمكنك انشاء تجزئة جديدة\n" "(لأنك وصلت الى العدد الأقصى من التجزئات الأساسية).\n" "أولاً اخذف تجزئة أساسية و قم بإنشاء تجزئة ممتدة." #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Mount" msgstr "حمل" #: ../../standalone/drakautoinst:1 #, c-format msgid "Creating auto install floppy" msgstr "جاري انشاء قرص التثبيت الآلي" #: ../../steps.pm:1 #, c-format msgid "Install updates" msgstr "تثبيت تحديثات النظام" #: ../../standalone/draksplash:1 #, c-format msgid "text box height" msgstr "ارتفاع الصندوق النصي" #: ../../standalone/drakconnect:1 #, c-format msgid "State" msgstr "الحالة" #: ../../standalone/drakfloppy:1 #, c-format msgid "Be sure a media is present for the device %s" msgstr "تأكد من وجود الوسيط للوحدة %s" #: ../../any.pm:1 #, c-format msgid "Enable multiple profiles" msgstr "تمكين التشكيلات المتعددة" #: ../../fs.pm:1 #, c-format msgid "Do not interpret character or block special devices on the file system." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "These options can backup and restore all files in your /etc directory.\n" msgstr "هذه الخيارات يمكنها نسخ و استرجاع كل الملفات في دليل /etc.\n" #: ../../printer/main.pm:1 #, c-format msgid "Local printer" msgstr "طابعة محلية" #: ../../standalone/drakbackup:1 #, c-format msgid "Files Restored..." msgstr "الملفات المستعادة..." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Package selection" msgstr "اختيار الحزم" #: ../../lang.pm:1 #, c-format msgid "Mauritania" msgstr "موريتانيا" #: ../../standalone/drakgw:1 #, c-format msgid "" "I can keep your current configuration and assume you already set up a DHCP " "server; in that case please verify I correctly read the Network that you use " "for your local network; I will not reconfigure it and I will not touch your " "DHCP server configuration.\n" "\n" "The default DNS entry is the Caching Nameserver configured on the firewall. " "You can replace that with your ISP DNS IP, for example.\n" "\t\t \n" "Otherwise, I can reconfigure your interface and (re)configure a DHCP server " "for you.\n" "\n" msgstr "" "يمكنني حفظ التهيئة و افتراض أنك قمت بإعداد خادم DHCP مسبقاً; في هذه الحال " "تأكد من أنني أستطيع قراءة الشبكة التي تستخدمها للشبكة المحلية بشكل صحيح; " "سأقوم بإعادة تهيئتها و لن أقوم بأي شئ تجاه تهيئة خادم DHCP.\n" "\n" "مدخل DNS الإفتراضي هو اسم الخادم المخبئي على الجدار الناري. يمكنك ابدال ذلك " "بعنوان IP للـDNS الخاص بموفر خدمة الإنترنت, مثل.\n" "\t\t \n" "ان لم يكن ذلك, يمكنني اعداة تهيئة الواجهة و اعداة تهيئة خادم DHCP لك.\n" "\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "No local printer found! To manually install a printer enter a device name/" "file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " "equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB " "printer: /dev/usb/lp1, ...)." msgstr "" "لم يتم ايجاد طابعة محلية! لتثبيت طابعة يدوياً ادخل اسم جهاز/اسم ملف في حقل " "الإدخال (الطابعات المتوازية: /dev/lp0, /dev/lp1, ..., مماثلة لـLPT1:, " "LPT2:, ..., طابعة USB الأولى: /dev/usb/lp0, طابعة USB الثانية: /dev/usb/" "lp1, ...)." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "All primary partitions are used" msgstr "كل التجزئات الرئيسية مستخدمة" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "LPD server \"%s\", printer \"%s\"" msgstr "على خادم LPD \"%s\", الطابعة \"%s\"" #: ../../network/netconnect.pm:1 #, c-format msgid "" "After this is done, we recommend that you restart your X environment to " "avoid any hostname-related problems." msgstr "" "بعد عمل ذلك, ننصح بإعادة تشغيل بيئة X لديك لتفادي أي مشاكل تتعلق بإسم " "المستضيف." #: ../../services.pm:1 #, c-format msgid "Automatic detection and configuration of hardware at boot." msgstr "تحقق و تهيئة آلية للعتاد عند الإقلاع." #: ../../standalone/drakpxe:1 #, c-format msgid "Installation Server Configuration" msgstr "تهيئة خادم الثبيت" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Configuring IDE" msgstr "جاري تهيئة IDE" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Network functionality not configured" msgstr "لم يتم تحديد وظيفية الشبكة" #: ../../standalone/harddrake2:1 #, c-format msgid "Configure module" msgstr "تهيئة الوحدة" #: ../../lang.pm:1 #, c-format msgid "Cocos (Keeling) Islands" msgstr "جزر الكوكوس" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "You'll need to reboot before the modification can take place" msgstr "ستحتاج الى اعادة التشغيل قبل أن يتم تفعيل التعديلات" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider phone number" msgstr "رقم هاتف الموفر" #: ../../printer/main.pm:1 #, c-format msgid "Host %s" msgstr "المستضيف %s" #: ../../lang.pm:1 #, c-format msgid "Fiji" msgstr "فيجي" #: ../../lang.pm:1 #, c-format msgid "Armenia" msgstr "أرمينيا" #: ../../any.pm:1 #, c-format msgid "Second floppy drive" msgstr "سواقة القرص المرن الثانية" #: ../../standalone/harddrake2:1 #, c-format msgid "About Harddrake" msgstr "حول HardDrake" #: ../../security/l10n.pm:1 #, c-format msgid "Authorize TCP connections to X Window" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Drive capacity" msgstr "حجم السواقة" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Insert a floppy in drive\n" "All data on this floppy will be lost" msgstr "" "أدخل قرصا مرنا في السواقة\n" "كل البيانات على القرص ستمحى" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Size: %s" msgstr "الحجم: %s" #: ../../keyboard.pm:1 #, c-format msgid "Control and Shift keys simultaneously" msgstr "مفاتيح Control و Shift في نفس الوقت" #: ../../standalone/harddrake2:1 #, c-format msgid "secondary" msgstr "ثانوي" #: ../../standalone/drakbackup:1 #, c-format msgid "View Backup Configuration." msgstr "اعرض تهيئة النسخ الإحتياطي" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, report check result to syslog." msgstr "if set to yes, report check result to syslog." #. -PO: keep this short or else the buttons will not fit in the window #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "No password" msgstr "لا كلمة مرور" #: ../../lang.pm:1 #, c-format msgid "Nigeria" msgstr "نيجيريا" #: ../../standalone/drakTermServ:1 #, c-format msgid "%s: %s requires hostname...\n" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "There is no existing partition to use" msgstr "لا توجد تجزئة لاستخدامها" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "The following scanners\n" "\n" "%s\n" "are available on your system.\n" msgstr "" "الماسحات الضوئية التالية\n" "\n" "%s\n" "متوفرة لنظامك.\n" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Multi-function device on parallel port #%s" msgstr ", جهاز متعدد الوظائف على المنفذ المتوازي #%s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print to a TCP or socket printer, you need to provide the host name or IP " "of the printer and optionally the port number (default is 9100). On HP " "JetDirect servers the port number is usually 9100, on other servers it can " "vary. See the manual of your hardware." msgstr "" "للطباعة الى طابعة TCP أو socket, يجب عليك اعطاء اسم المستضيف أو عنوان IP " "الخاص بالطابعة و اختيارياً يمكنك اضافة رقم منفذ الطابعة (الإفتراضي هو 9100). " "على خادمات HP JetDirect يكون رقم المنفذ عادةً هو 9100, على الخادمات الأخرى " "يمكن أن يكون الرقم غير ذلك. الق نظرة على دليل المستخدم للعتاد الخاص بك." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Hard drive information" msgstr "معلومات القرص الصلب" #: ../../keyboard.pm:1 #, c-format msgid "Russian" msgstr "الروسية" #: ../../lang.pm:1 #, c-format msgid "Jordan" msgstr "الأردن" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Hide files" msgstr "خبئ الملفات" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detect printers connected to this machine" msgstr "تحقق أليا من الطابعات المتصلة بهذا الجهاز" #: ../../any.pm:1 #, c-format msgid "Sorry, no floppy drive available" msgstr "آسف , لا مدخل مرن متاح" #: ../../lang.pm:1 #, c-format msgid "Bolivia" msgstr "بوليفيا" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Set up your Windows server to make the printer available under the IPP " "protocol and set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" "قم بإعداد خادم Windows لجعل الطابعات متوفرة تحت بروتوكول IPP و قم بإعداد " "الطباعة من هذه الماكينة باستخدام نوع الوصلة \"%s\" في Printerdrake.\n" "\n" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Bad package" msgstr "حزمة سيئة" #: ../advertising/07-server.pl:1 #, c-format msgid "" "Transform your computer into a powerful Linux server: Web server, mail, " "firewall, router, file and print server (etc.) are just a few clicks away!" msgstr "" "حوّل جهازك الى خادم Linux قوي بنقرات قليلة من الفأرة: خادم ويب, بريد, جدار " "ناري, موجّه, خادم ملفات و طباعة, ..." #: ../../security/level.pm:1 #, c-format msgid "DrakSec Basic Options" msgstr "خيارات DrakSec الأساسية" #: ../../standalone/draksound:1 #, c-format msgid "" "\n" "\n" "\n" "Note: if you've an ISA PnP sound card, you'll have to use the sndconfig " "program. Just type \"sndconfig\" in a console." msgstr "" "\n" "\n" "\n" "ملحوظة: اذا كانت لديك بطاقة صوت ISA PnP, ستحتاج الى استخدام برنامج " "sndconfig. فقط عليك كتابة \"sndconfig\" في سطر الأوامر." #: ../../lang.pm:1 #, c-format msgid "Romania" msgstr "رومانيا" #: ../../standalone/drakperm:1 #, c-format msgid "Group" msgstr "المجموعة" #: ../../lang.pm:1 #, c-format msgid "Canada" msgstr "كندا" #: ../../standalone/scannerdrake:1 #, c-format msgid "choose device" msgstr "اختر الجهاز " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Remove from LVM" msgstr "ازالة من LVM" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Timezone" msgstr "المنطقة الزمنية" #: ../../keyboard.pm:1 #, c-format msgid "German" msgstr "الألمانية" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1 #: ../../ugtk2.pm:1 ../../interactive/newt.pm:1 #: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Next ->" msgstr "التالي ->" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Turning on this allows to print plain text files in japanese language. Only " "use this function if you really want to print text in japanese, if it is " "activated you cannot print accentuated characters in latin fonts any more " "and you will not be able to adjust the margins, the character size, etc. " "This setting only affects printers defined on this machine. If you want to " "print japanese text on a printer set up on a remote machine, you have to " "activate this function on that remote machine." msgstr "" "تشغيل هذا الخيار يسمح بطباعة ملفات النصوص العادية باللغة اليابانية. استخدم " "هذه الميزة فقط اذا كنت تريد طباعة النصوص باليابانية, اذا تم تنشيط هذا الخيار " "لن يمكنك طباعة الحروف اللاتينية ذات العلامات و لن يمكنك تعديل الهوامش و حجم " "الخطوط الخ. هذا الخيار يؤثر فقط على الطابعات المعرفة على هذه الماكينة. اذا " "كنت تريد طباعة النصوص اليابانية على طابعة بعيدة, يجب عليك تنشيط هذه الوظيفة " "على الطابعة البعيدة." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "\n" "Chances are, this partition is\n" "a Driver partition. You should\n" "probably leave it alone.\n" msgstr "" "\n" "Chances are, this partition is\n" "a Driver partition. You should\n" "probably leave it alone.\n" #: ../../lang.pm:1 #, c-format msgid "Guinea-Bissau" msgstr "غينيا-بيساو" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Horizontal refresh rate" msgstr "نسبة الإنعاش الأفقي" #: ../../standalone/drakperm:1 ../../standalone/printerdrake:1 #, c-format msgid "Edit" msgstr "تحرير" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Can't unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" "لم يمكن ازالة تعيين نقطة التحميل نظرا لأن هذه التجزئة مستخدمة لـloop back.\n" "قم بإزالة الـloopback أولا" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The network configuration done during the installation cannot be started " "now. Please check whether the network is accessable after booting your " "system and correct the configuration using the Mandrake Control Center, " "section \"Network & Internet\"/\"Connection\", and afterwards set up the " "printer, also using the Mandrake Control Center, section \"Hardware\"/" "\"Printer\"" msgstr "" "لا يمكن بدء تهيئة الشبكة التي تم عملها أثناء التثبيت الآن. فضلاً تأكد اذا كان " "يمكن الوصول الى الشبكة بعد اقلاع النظام و صحّح التهيئة باستخدام مركز تحكم " "Mandrake في قسم \"الشبكة و الإنترنت\"/\"الوصلات\", و بعد ذلك قم بتهيئة " "الطابعة, كذلك باستخدام مركز تحكم Mandrake في قسم \"العتاد\"/\"الطابعة\"" #: ../../harddrake/data.pm:1 #, c-format msgid "USB controllers" msgstr "متحكمات USB" #: ../../Xconfig/various.pm:1 #, c-format msgid "What norm is your TV using?" msgstr "أي نظام يستخدمه جهاز التلفاز لديك؟" #: ../../standalone/drakconnect:1 #, c-format msgid "Type:" msgstr "النوع:" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Share name" msgstr "اسم المشاركة" #: ../../standalone/drakgw:1 #, c-format msgid "enable" msgstr "تمكين" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Contacting Mandrake Linux web site to get the list of available mirrors..." msgstr "" "جاري الإتصال بموقع Mandrake Linux للحصول على قائمة بالمرايا المتوفرة..." #: ../../network/netconnect.pm:1 #, c-format msgid "" "A problem occured while restarting the network: \n" "\n" "%s" msgstr "" "ظهرت مشكلة أثناء اعادة تشغيل الشبكة: \n" "\n" "%s" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Remove the loopback file?" msgstr "هل تريد ازالة ملف loopback؟" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Selected size is larger than available space" msgstr "الحجم المختار أكبر من المساحة المتوفرة" #: ../../printer/printerdrake.pm:1 #, c-format msgid "NCP server name missing!" msgstr "اسم خادم NCP مفقود!" #: ../../any.pm:1 #, c-format msgid "Please choose your country." msgstr "فضلاً اختر بلدك." #: ../../standalone/drakbackup:1 #, c-format msgid "Hard Disk Backup files..." msgstr "ملفات النسخ الإحتياطي للقرص الصلب..." #: ../../keyboard.pm:1 #, c-format msgid "Laotian" msgstr "اللاوسية" #: ../../lang.pm:1 #, c-format msgid "Samoa" msgstr "ساموا" #: ../../services.pm:1 #, c-format msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" "بروتوكول rstat يسمح للمستخدمين على الشبكة باسترجاع\n" "احصائيات آداء أي جهاز على هذه الشبكة." #: ../../standalone/scannerdrake:1 #, c-format msgid "Re-generating list of configured scanners ..." msgstr "جاري اعادة توليد قائمة الماسحات الضوئية المعدّة ..." #: ../../modules/interactive.pm:1 #, fuzzy, c-format msgid "Module configuration" msgstr "تهيئة يدوية" #: ../../harddrake/data.pm:1 #, c-format msgid "Scanner" msgstr "الماسح الضوئي" #: ../../Xconfig/test.pm:1 #, c-format msgid "Warning: testing this graphic card may freeze your computer" msgstr "تحذير: اختبار بطاقة العرض هذه قد يتسب في ايقاف جهازك" #: ../../any.pm:1 #, c-format msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "اسم المستخدم يجب أن يحتوي فقط على الحروف الصغيرة, الأرقام, `-' و `_'" #: ../../standalone/drakbug:1 #, c-format msgid "Menudrake" msgstr "Menudrake" #: ../../security/level.pm:1 #, c-format msgid "Welcome To Crackers" msgstr "مرحبا بالمخترقين" #: ../../modules/interactive.pm:1 #, c-format msgid "Module options:" msgstr "خيارات الوحدة:" #: ../advertising/11-mnf.pl:1 #, c-format msgid "Secure your networks with the Multi Network Firewall" msgstr "قم بحماية شبكاتك باستخدام Multi Network Firewall" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Go on without configuring the network" msgstr "تابع دون تهيئة الشبكة" #: ../../network/isdn.pm:1 #, c-format msgid "Abort" msgstr "إنهاء" #: ../../standalone/drakbackup:1 #, c-format msgid "No password prompt on %s at port %s" msgstr "لا يوجد طلب كلمة سر في %s على المنفذ %s" #: ../../mouse.pm:1 #, fuzzy, c-format msgid "Kensington Thinking Mouse with Wheel emulation" msgstr "Kensington Thinking Mouse" #: ../../standalone/scannerdrake:1 #, c-format msgid "Usage of remote scanners" msgstr "استخدام الماسحات الضوئية البعيدة" #: ../../install_interactive.pm:1 #, c-format msgid "" "Your Windows partition is too fragmented. Please reboot your computer under " "Windows, run the ``defrag'' utility, then restart the Mandrake Linux " "installation." msgstr "" "Your Windows partition is too fragmented. Please reboot your computer under " "Windows, run the ``defrag'' utility, then restart the Mandrake Linux " "installation." #: ../../keyboard.pm:1 #, c-format msgid "Dvorak (Norwegian)" msgstr "Dvorak (نرويجيةّ)" #: ../../standalone/drakbackup:1 #, c-format msgid "Hard Disk Backup Progress..." msgstr "التقدم في نسخ القرص الصلب..." #: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1 #, c-format msgid "Unable to fork: %s" msgstr "تعذر تنفيذ: %s" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Type: " msgstr "النوع: " #: ../../standalone/drakTermServ:1 #, c-format msgid "<-- Edit Client" msgstr "<-- تحرير العميل" #: ../../standalone/drakfont:1 #, c-format msgid "no fonts found" msgstr "لا توجد خطوط" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../harddrake/data.pm:1 #, c-format msgid "Mouse" msgstr "الفأرة" #: ../../bootloader.pm:1 #, c-format msgid "not enough room in /boot" msgstr "لا توجد مساحو كافية في /boot" #: ../../install_steps_gtk.pm:1 #, c-format msgid "trying to promote %s" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Liechtenstein" msgstr "ليشتنشتاين" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Host name" msgstr "اسم المستضيف" #: ../../standalone/draksplash:1 #, c-format msgid "the color of the progress bar" msgstr "لون شريط التقدم" #: ../../standalone/drakfont:1 #, c-format msgid "Suppress Fonts Files" msgstr "أبطل ملفات الخطوط" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Add to RAID" msgstr "اضافة الى RAID" #: ../../help.pm:1 #, c-format msgid "" "You can add additional entries in yaboot for other operating systems,\n" "alternate kernels, or for an emergency boot image.\n" "\n" "For other OSs, the entry consists only of a label and the \"root\"\n" "partition.\n" "\n" "For Linux, there are a few possible options:\n" "\n" " * Label: this is the name you will have to type at the yaboot prompt to\n" "select this boot option.\n" "\n" " * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n" "variation of vmlinux with an extension.\n" "\n" " * Root: the \"root\" device or ``/'' for your Linux installation.\n" "\n" " * Append: on Apple hardware, the kernel append option is often used to\n" "assist in initializing video hardware, or to enable keyboard mouse button\n" "emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n" "The following are some examples:\n" "\n" " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" "hda=autotune\n" "\n" " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" "\n" " * Initrd: this option can be used either to load initial modules before\n" "the boot device is available, or to load a ramdisk image for an emergency\n" "boot situation.\n" "\n" " * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n" "need to allocate a large ramdisk, this option can be used to specify a\n" "ramdisk larger than the default.\n" "\n" " * Read-write: normally the \"root\" partition is initially mounted as\n" "read-only, to allow a file system check before the system becomes ``live''.\n" "You can override the default with this option.\n" "\n" " * NoVideo: should the Apple video hardware prove to be exceptionally\n" "problematic, you can select this option to boot in ``novideo'' mode, with\n" "native frame buffer support.\n" "\n" " * Default: selects this entry as being the default Linux selection,\n" "selectable by pressing ENTER at the yaboot prompt. This entry will also be\n" "highlighted with a ``*'' if you press [Tab] to see the boot selections." msgstr "" "You can add additional entries in yaboot for other operating systems,\n" "alternate kernels, or for an emergency boot image.\n" "\n" "For other OSs, the entry consists only of a label and the \"root\"\n" "partition.\n" "\n" "For Linux, there are a few possible options:\n" "\n" " * Label: this is the name you will have to type at the yaboot prompt to\n" "select this boot option.\n" "\n" " * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n" "variation of vmlinux with an extension.\n" "\n" " * Root: the \"root\" device or ``/'' for your Linux installation.\n" "\n" " * Append: on Apple hardware, the kernel append option is often used to\n" "assist in initializing video hardware, or to enable keyboard mouse button\n" "emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n" "The following are some examples:\n" "\n" " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" "hda=autotune\n" "\n" " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" "\n" " * Initrd: this option can be used either to load initial modules before\n" "the boot device is available, or to load a ramdisk image for an emergency\n" "boot situation.\n" "\n" " * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n" "need to allocate a large ramdisk, this option can be used to specify a\n" "ramdisk larger than the default.\n" "\n" " * Read-write: normally the \"root\" partition is initially mounted as\n" "read-only, to allow a file system check before the system becomes ``live''.\n" "You can override the default with this option.\n" "\n" " * NoVideo: should the Apple video hardware prove to be exceptionally\n" "problematic, you can select this option to boot in ``novideo'' mode, with\n" "native frame buffer support.\n" "\n" " * Default: selects this entry as being the default Linux selection,\n" "selectable by pressing ENTER at the yaboot prompt. This entry will also be\n" "highlighted with a ``*'' if you press [Tab] to see the boot selections." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP." msgstr "تمت اضافة الطابعة \"%s\" الى Star Office/OpenOffice.org/GIMP بنجاح." #: ../../standalone/drakTermServ:1 #, c-format msgid "No floppy drive available!" msgstr "لا توجد سواقة قرص مرن!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To know about the options available for the current printer read either the " "list shown below or click on the \"Print option list\" button.%s%s%s\n" "\n" msgstr "" "للمعرفة حول الخيارات المتوفرة للطابعة الحالية, إما أن تقرأ القائمة أدناه و " "انقر \"قائمة خيارات الطابعة\".%s%s%s\n" "\n" #: ../../lang.pm:1 #, c-format msgid "Saudi Arabia" msgstr "السعودية" #: ../../services.pm:1 #, c-format msgid "Internet" msgstr "الإنترنت" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Continue anyway?" msgstr "هل تريد الاكمال على أي حال؟" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "If your printer is not listed, choose a compatible (see printer manual) or a " "similar one." msgstr "" "اذا لم تكن طابعت موجودة في القائمة, فضلاً اختر طابعة متوافقة (انظر دليل " "الطابعة) أو اختر طابعة مماثلة." #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Printer" msgstr "طابعة" #: ../../standalone/service_harddrake:1 #, c-format msgid "Some devices were added:\n" msgstr "تمت اضافة بعض العتاد:\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "الهندسة: %s اسطوانة, %s رأس, %s قطاع\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing on the printer \"%s\"" msgstr "جاري الطباعة على الطابعة \"%s\"" #: ../../standalone/drakTermServ:1 #, c-format msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed" msgstr "/etc/hosts.allow و /etc/hosts.deny معدّان مسبقاً - لم يتم التغيير" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore From Tape" msgstr "استعادة من الشريط" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "" "To submit a bug report, click the report button, which will open your " "default browser\n" "to Anthill where you will be able to upload the above information as a bug " "report." msgstr "" "لتسليم تقرير العيوب, اضغط على زر تقرير.\n" "سيقوم هذا بقتح متصفح ويب على الصفحة %s\n" " حيث ستجد استمارة عليك ملؤها. المعلومات المذكرة أعلاه سيتم نقلها\n" "الى ذلك الخادم" #: ../../network/netconnect.pm:1 #, c-format msgid "Choose the profile to configure" msgstr "اختر التشكيل الذي تريد تهيئته" #: ../../security/l10n.pm:1 #, c-format msgid "Password minimum length and number of digits and upcase letters" msgstr "" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "" "\n" "\n" "Enter a Zeroconf host name without any dot if you don't\n" "want to use the default host name." msgstr "" "\n" "\n" "أدخل اسم مستضيف Zeroconf بدون أي نقاط اذا لم تكن تريد\n" "استخدام اسم المستضيف الإفتراضي." #: ../../standalone/drakbackup:1 #, c-format msgid "Backup Now from configuration file" msgstr "قم بالنسخ الآن من ملف التهيئة" #: ../../fsedit.pm:1 #, c-format msgid "Mount points should contain only alphanumerical characters" msgstr "نقا التحميل يجب أن تحتوي فقط على الحروف و/أو الآرقام" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Restarting printing system..." msgstr "جاري اعادة تشغيل نظام الطباعة..." #: ../../../move/tree/mdk_totem:1 #, c-format msgid "You can only run with no CDROM support" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "See hardware info" msgstr "عرض معلومات العتاد" #: ../../standalone/drakbackup:1 #, c-format msgid "Day" msgstr "اليوم" #: ../../any.pm:1 #, c-format msgid "First sector of boot partition" msgstr "القطاع اول من تجزئة الإقلاع" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer manufacturer, model" msgstr "مصنّع الطابعة, الطراز" #: ../../printer/data.pm:1 #, c-format msgid "PDQ - Print, Don't Queue" msgstr "PDQ - Print, Don't Queue" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTIONS]...\n" "Mandrake Terminal Server Configurator\n" "--enable : enable MTS\n" "--disable : disable MTS\n" "--start : start MTS\n" "--stop : stop MTS\n" "--adduser : add an existing system user to MTS (requires username)\n" "--deluser : delete an existing system user from MTS (requires " "username)\n" "--addclient : add a client machine to MTS (requires MAC address, IP, " "nbi image name)\n" "--delclient : delete a client machine from MTS (requires MAC address, " "IP, nbi image name)" msgstr "" "[OPTIONS]...\n" "Mandrake Terminal Server Configurator\n" "--enable : enable MTS\n" "--disable : disable MTS\n" "--start : start MTS\n" "--stop : stop MTS\n" "--adduser : add an existing system user to MTS (requires username)\n" "--deluser : delete an existing system user from MTS (requires " "username)\n" "--addclient : add a client machine to MTS (requires MAC address, IP, " "nbi image name)\n" "--delclient : delete a client machine from MTS (requires MAC address, " "IP, nbi image name)" #: ../../standalone/drakTermServ:1 #, c-format msgid "Subnet Mask:" msgstr "Subnet Mask:" #: ../../security/l10n.pm:1 #, c-format msgid "Set password expiration and account inactivation delays" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "" "_: load here is a noun, the load of the system\n" "Load" msgstr "" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" "المعاملان المهمان جدا هما نسبة الإنعاش الأفقي, و هي النسبة التي\n" "يتم فيها انعاش الشاشة كاملة, و الأهم هو نسبة التزامن الأفقي\n" "و التي في خلالها يتم عرض خطوط المسح.\n" "\n" "من *المهم جدا* أن لا تحدد نوع شاشة مع متوسط تزامن\n" "أكبر من مقدرة شاشتك لأنك بهذا قد تدمر شاشتك.\n" " اذا لم تكن متأكدا يمكنك اختيار اعدادات عادية." #: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 #, c-format msgid "Modify" msgstr "تعديل" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "The \"%s\" and \"%s\" commands also allow to modify the option settings for " "a particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \".\n" msgstr "" "\n" "الأوامر \"%s\" و \"%s\" تسمح لك بتعديل اعدادات الخيارات لوظيفة طباعة محددة. " "ببساطة قم بإضافة الإعداد المطلوب الى سطر الآوامر, مثال \"%s \".\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Need hostname, username and password!" msgstr "يُحتاج الى اسم المستضيف و اسم المستخدم و كلمة المرور!" #: ../../network/tools.pm:1 #, fuzzy, c-format msgid "Insert floppy" msgstr "أدخل قرص مرن في %s" #: ../../diskdrake/dav.pm:1 #, c-format msgid "" "WebDAV is a protocol that allows you to mount a web server's directory\n" "locally, and treat it like a local filesystem (provided the web server is\n" "configured as a WebDAV server). If you would like to add WebDAV mount\n" "points, select \"New\"." msgstr "" "WebDAV هو برتوكول يسمج لك بتحميل دليل في خادم الويب بشكل\n" "محلي, و معاملته كنظام ملفات محلي (يجب أن يكون خادم الويب معدّ\n" "كخادم WebDAV). اذا كنت تريد اضافة نقاط تحميل\n" "WebDAV, اختر \"جديد\"." #: ../../standalone/drakbug:1 #, c-format msgid "HardDrake" msgstr "HardDrake" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "new" msgstr "جديد" #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable syslog reports to console 12" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Would you like to try again?" msgstr "هل تريد المحاولة مرةً أخرى؟" #: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Wizard" msgstr "المعالج" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Edit selected server" msgstr "حرر الخادم المختار" #: ../../standalone/drakbackup:1 #, c-format msgid "Please choose where you want to backup" msgstr "رجاء اختر أين تريد النسخ الاحتياطي." #: ../../install_steps_interactive.pm:1 #, c-format msgid "You need to reboot for the partition table modifications to take place" msgstr "تحتاج الى اعداة التثبيت لتفعيل التعديلات على جدول التجزئات" #: ../../standalone/drakbackup:1 #, c-format msgid "Do not include the browser cache" msgstr "لا تستخدم ذاكرة المتصفح المخبئية" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Failed to check filesystem %s. Do you want to repair the errors? (beware, " "you can lose data)" msgstr "" "تعذر التأكد من صحة نظام المفات %s. هل تريد تصحيح الأخطاء (كن حذراً, يمكن أن " "تخسر بيانات)" #: ../../standalone/keyboarddrake:1 #, c-format msgid "Please, choose your keyboard layout." msgstr "من فضلك اختر تصميم لوحة مفاتيحك" #: ../../mouse.pm:1 ../../security/level.pm:1 #, c-format msgid "Standard" msgstr "القياسي" #: ../../standalone/mousedrake:1 #, c-format msgid "Please choose your mouse type." msgstr "فضلاً, اختر نوع الفأرة الخاصة بك." #: ../../standalone/drakconnect:1 #, c-format msgid "Connect..." msgstr "اتصل..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Failed to configure printer \"%s\"!" msgstr "تعذرت تهيئة الطابعة \"%s\"!" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "not configured" msgstr "غير معدّ" #: ../../network/isdn.pm:1 #, c-format msgid "ISA / PCMCIA" msgstr "ISA / PCMCIA" #: ../../standalone/drakfont:1 #, c-format msgid "About" msgstr "حول" #: ../../mouse.pm:1 #, c-format msgid "GlidePoint" msgstr "GlidePoint" #: ../../network/network.pm:1 #, c-format msgid "Proxies configuration" msgstr "اعدادات البروكسي" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Start: sector %s\n" msgstr "البداية: قطاع %s\n" #: ../../standalone/drakconnect:1 #, c-format msgid "No Mask" msgstr "لا قناع" #: ../../standalone/drakgw:1 #, c-format msgid "Network interface already configured" msgstr "واجهة الشبكة معدّة مسبقا!" #: ../../standalone/drakTermServ:1 #, c-format msgid "Couldn't access the floppy!" msgstr "تعذر الوصول الى القرص المرن!" #: ../../install_messages.pm:1 #, c-format msgid "" "Warning: Free Software may not necessarily be patent free, and some Free\n" "Software included may be covered by patents in your country. For example, " "the\n" "MP3 decoders included may require a licence for further usage (see\n" "http://www.mp3licensing.com for more details). If you are unsure if a " "patent\n" "may be applicable to you, check your local laws." msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Mail Server" msgstr "خادم بريد" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Please click on a partition" msgstr "فضلا اضغط على تجزئة" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Multi-function device on HP JetDirect" msgstr ", جهاز متعدد الوظائف على HP JetDirect" #: ../../any.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Linux" msgstr "Linux" #: ../../standalone/drakxtv:1 #, c-format msgid "Have a nice day!" msgstr "نتمنى لك يوماً سعيداً!" #: ../../help.pm:1 #, c-format msgid "/dev/fd0" msgstr "/dev/fd0" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Upgrade %s" msgstr "ترقية %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Select Printer Connection" msgstr "اختر وصلة الطابعة" #: ../../standalone/drakxtv:1 #, c-format msgid "Scanning for TV channels in progress ..." msgstr "ضيط قنوات التلفاز في تقدم ..." #: ../../standalone/drakbackup:1 #, c-format msgid "" "Error during sending file via FTP.\n" " Please correct your FTP configuration." msgstr "" "خطأ أثناء ارسال الملف عير FTP.\n" " فضلاً قم بتصحيح اعدادات FTP." #: ../../standalone/drakTermServ:1 #, c-format msgid "IP Range Start:" msgstr "IP Range Start:" #: ../../services.pm:1 #, c-format msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" "مراقب الإنترنت الأساسي (يسمى عادةً بـ inetd) يبدأ\n" "مجموعة من خدمات الإنترنت الأخرى عند الحاجة. انه مسؤول عن بدء\n" "العديد من الخدمات, بما فيها telnet, ftp, rsh, و rlogin. تعطيل inetd سيعطل\n" "كل الخدمات المذكورة." #: ../../standalone/draksplash:1 #, c-format msgid "the height of the progress bar" msgstr "ارتفاع شريط التقدم" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Save via %s on host: %s\n" msgstr "" "\n" "- احفظ عبر %s على المستضيف: %s\n" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "Argentina" msgstr "الأرجنتين " #: ../../network/drakfirewall.pm:1 #, c-format msgid "Domain Name Server" msgstr "خادم اسم النطاق" #: ../../standalone/draksec:1 #, c-format msgid "Security Level:" msgstr "مستوى الأمن:" #: ../../fsedit.pm:1 #, c-format msgid "Mount points must begin with a leading /" msgstr "يجب أن تبدأ نقاط التحميل بالعلامة /" #: ../../standalone/drakbackup:1 #, c-format msgid "Choose your CD/DVD device" msgstr "فضلاً اختر جهاز CD/DVD" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "CUPS server" msgstr "خادم DNS" #: ../../standalone/logdrake:1 #, c-format msgid "Postfix Mail Server" msgstr "خادم البريد Postfix" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Quit without saving" msgstr "الخروج بدون الحفظ" #: ../../lang.pm:1 #, c-format msgid "Yemen" msgstr "اليمن" #: ../advertising/11-mnf.pl:1 #, c-format msgid "This product is available on the MandrakeStore Web site." msgstr "هذا المنتج متوفر على موقع MandrakeStore" #: ../../interactive/stdio.pm:1 #, c-format msgid "=> There are many things to choose from (%s).\n" msgstr "=> There are many things to choose from (%s).\n" #: ../../standalone/drakclock:1 #, c-format msgid "GMT - DrakClock" msgstr "" #: ../../../move/move.pm:1 #, c-format msgid "" "An error occurred:\n" "\n" "\n" "%s\n" "\n" "This may come from corrupted system configuration files\n" "on the USB key, in this case removing them and then\n" "rebooting Mandrake Move would fix the problem. To do\n" "so, click on the corresponding button.\n" "\n" "\n" "You may also want to reboot and remove the USB key, or\n" "examine its contents under another OS, or even have\n" "a look at log files in console #3 and #4 to try to\n" "guess what's happening." msgstr "" #: ../../steps.pm:1 #, c-format msgid "Hard drive detection" msgstr "التحقق من الأقراص الصلبة" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You haven't selected any group of packages.\n" "Please choose the minimal installation you want:" msgstr "" "لم تختر أي مجموعة من الحزم.\n" "فضلاً اختر التثبيت المصغر الذي تريده:" #: ../../network/adsl.pm:1 #, c-format msgid "" "You need the Alcatel microcode.\n" "You can provide it now via a floppy or your windows partition,\n" "or skip and do it later." msgstr "" #: ../../diskdrake/dav.pm:1 #, c-format msgid "Please enter the WebDAV server URL" msgstr "رجاء أدخل عنوان خادم WebDav" #: ../../lang.pm:1 #, c-format msgid "Tajikistan" msgstr "طاجكستان" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 #: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1 #, c-format msgid "Accept" msgstr "اقبل" #: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1 #: ../../standalone/printerdrake:1 #, c-format msgid "Description" msgstr "الوصف" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Please enter summary text." msgstr "رجاء أدخل اسم الدخول" #: ../../fsedit.pm:1 #, c-format msgid "Error opening %s for writing: %s" msgstr " فتحة الخطإ %s للكتابة :%s" #: ../../Xconfig/various.pm:1 #, c-format msgid "Mouse type: %s\n" msgstr "نوع الفأرة: %s\n" #: ../../Xconfig/card.pm:1 #, c-format msgid "Your card can have 3D hardware acceleration support with XFree %s." msgstr "يمكن لبطاقتك الحصول على دعم للتسريع ثلاثي الأبعاد مع XFree %s" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Choose a monitor" msgstr "إختر شاشة" #: ../../any.pm:1 #, c-format msgid "Empty label not allowed" msgstr "غير مسموح بالعلامات الفارغة" #: ../../keyboard.pm:1 #, c-format msgid "Maltese (UK)" msgstr "المالطية (بريطانيا)" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "I can't add any more partition" msgstr "لا يمكنني اضافة أي تجزئة أخرى" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Size in MB: " msgstr "الحجم باليغابايت: " #: ../../printer/main.pm:1 #, c-format msgid "Remote printer" msgstr "طابعة بعيدة" #: ../../any.pm:1 #, c-format msgid "Please choose a language to use." msgstr "رجاء اختر لغة الاستخدام." #: ../../network/network.pm:1 #, c-format msgid "" "WARNING: this device has been previously configured to connect to the " "Internet.\n" "Simply accept to keep this device configured.\n" "Modifying the fields below will override this configuration." msgstr "" "تحذير: تمت تهيئة هذا الجهاز سابقاً للإتصال بالإنترنت.\n" "بكل بساطة اقبل أن تُبقي هذا الجهاز معدّ.\n" "تعديل الحقول أدناه سيغيّر هذه التهيئة." #: ../../any.pm:1 #, c-format msgid "I can set up your computer to automatically log on one user." msgstr "يمكن اعداد جهازك لتسجيل الدخول آلياً لمستخدم معين." #: ../../standalone/harddrake2:1 #, c-format msgid "Floppy format" msgstr "نسق القرص الصلب" #: ../../standalone/drakfont:1 #, c-format msgid "Generic Printers" msgstr "طابعات عادية (Generic)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the printer to which the print jobs should go or enter a " "device name/file name in the input line" msgstr "" "فضلاً أدخل الطابعة التي يجب أن تذهب اليها وظائف الطباعة أو أدخل اسم جهاز/اسم " "ملف في حقل الإدخال" #: ../../standalone/scannerdrake:1 #, c-format msgid "The scanners on this machine are available to other computers" msgstr "الماسحات الضوئية على هذه الماكينة متوفرة للحواسيب الأخرى" #: ../../any.pm:1 #, c-format msgid "First sector of the root partition" msgstr "القطاع الأول من التجزئة الجذرية" #: ../../standalone/harddrake2:1 #, c-format msgid "Alternative drivers" msgstr "مشغلات بديلة" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Please check all options that you need.\n" msgstr "" "\n" "فضلاً قم بالتأشير على الخيارات التي تحتاجها.\n" #: ../../any.pm:1 #, c-format msgid "Initrd" msgstr "Initrd" #: ../../lang.pm:1 #, c-format msgid "Cape Verde" msgstr "كيب فيردي" #: ../../standalone/harddrake2:1 #, c-format msgid "whether this cpu has the Cyrix 6x86 Coma bug" msgstr "اذا كان المعالج لديه Cyrix 6x86 Coma bug" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Loading printer configuration... Please wait" msgstr "جاري تحميل المستخدمين و المجموعات... رجاء الانتظار" #: ../../standalone/harddrake2:1 #, c-format msgid "early pentiums were buggy and freezed when decoding the F00F bytecode" msgstr "معالجات pentium القديمة كانت تتوقف عن العمل عند استخدام الكود F00F" #: ../../lang.pm:1 #, c-format msgid "Guam" msgstr "غوام" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the port that your printer is connected to or enter a device " "name/file name in the input line" msgstr "" "فضلاً أدخل المنفذ المتصلة به الطابعة أو أدخل اسم جهاز/اسم ملف في حقل الإدخال" #: ../../standalone/logdrake:1 #, c-format msgid "/Options/Test" msgstr "/خيارات/اختبار" #: ../../security/level.pm:1 #, c-format msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive. It must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" "يجب استخدام هذا المستوى الأمني بحذر. فهو يجعل نظامك أسهل في الإستخدام,\n" "لكن يمون حساساً جداً. لذا لا يجب استخدامه لماكينة متصلة بماكينات أخرى\n" "أو الى الإنترنت. لا يوجد دخول بكلمة المرور." # y, c-format #: ../../fs.pm:1 #, c-format msgid "Mounting partition %s" msgstr "جاري تحميل التجزئة %s" #: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "User name" msgstr "اسم المستخدم" #: ../../standalone/drakbug:1 #, c-format msgid "Userdrake" msgstr "Userdrake" #: ../../install_interactive.pm:1 #, c-format msgid "Which partition do you want to use for Linux4Win?" msgstr "أي تجزئة تريد استخدامها من أجل Linux4Win" #: ../../install_steps_gtk.pm:1 #, fuzzy, c-format msgid "due to missing %s" msgstr "kdesu missing" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Test pages" msgstr "صفحات اختبارية" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Logical volume name " msgstr "Logical volume name " #: ../../standalone/drakbackup:1 #, c-format msgid "" "List of data to restore:\n" "\n" msgstr "" "قائمة البيانات التي سيتم استرجاعها:\n" "\n" #: ../../fs.pm:1 #, c-format msgid "Checking %s" msgstr "جاري التأكد من %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "TCP/Socket Printer Options" msgstr "خيارات طابعة TCP/Socket" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card mem (DMA)" msgstr "Card mem (DMA)" #: ../../standalone/net_monitor:1 #, c-format msgid "Disconnecting from Internet " msgstr "اقطع الإتصال بالإنترنت" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "France" msgstr "فرنسا" #: ../../standalone/drakperm:1 #, c-format msgid "browse" msgstr "استعرض" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Checking installed software..." msgstr "جاري التأكد من البرامج المثبّتة..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote printer name missing!" msgstr "اسم الطابعة البعيدة مفقود!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do you want to enable printing on printers in the local network?\n" msgstr "هل تريد تمكين الطباعة على الطابعات في الشبكة المحلية؟\n" #: ../../lang.pm:1 #, c-format msgid "Turkey" msgstr "تركيا" #: ../../network/adsl.pm:1 #, c-format msgid "Alcatel speedtouch usb" msgstr "Alcatel speedtouch usb" #: ../../standalone/harddrake2:1 #, c-format msgid "Number of buttons" msgstr "عدد الأزرار" #: ../../keyboard.pm:1 #, c-format msgid "Vietnamese \"numeric row\" QWERTY" msgstr "افيتنامية \"صف رقمي\" QWERTY" #: ../../standalone/harddrake2:1 #, c-format msgid "Module" msgstr "وحدة" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "In addition, queues not created with this program or \"foomatic-configure\" " "cannot be transferred." msgstr "" "بالإضافة الى ذلك, فإن الصفوف التي لم يتم عملها بهذا البرنامح أو \"foomatic-" "configure\" لا يمكن نقلها." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Hardware" msgstr "العتاد" #: ../../keyboard.pm:1 #, c-format msgid "Ctrl and Alt keys simultaneously" msgstr "مفاتيح Ctrl و Alt في نفس الوقت" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "United States" msgstr "الولايات المتحدة" #: ../../security/l10n.pm:1 #, c-format msgid "User umask" msgstr "User umask" #: ../../any.pm:1 #, c-format msgid "Default OS?" msgstr "نظام التشغيل الافتراضي؟" #: ../../keyboard.pm:1 #, c-format msgid "Swiss (German layout)" msgstr "السويسرية (تصميم ألماني)" #: ../../Xconfig/card.pm:1 #, c-format msgid "Configure all heads independently" msgstr "اعداد كل الرؤوس بشكل مستقل" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the printer you want to set up. The configuration of the " "printer will work fully automatically. If your printer was not correctly " "detected or if you prefer a customized printer configuration, turn on " "\"Manual configuration\"." msgstr "" "فضلاً أدخل الطابعة التي تريد اعدادها. اعداد هذه الطابعة سيعمل آلياً. ان لم يتم " "اكتشاف الطابعة بالشكل الصحيح أو اذا كنت تفضل تهيئة يدوية شغل \"تهيئة يدوية\"." #: ../../install_steps_interactive.pm:1 #, c-format msgid "NTP Server" msgstr "خادم NTP" #: ../../security/l10n.pm:1 #, c-format msgid "Sulogin(8) in single user level" msgstr "Sulogin(8) في مستوى المستخدم الوحيد" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Load/Save on floppy" msgstr "حمّل/احفظ على قرص مرن" #: ../../standalone/draksplash:1 #, c-format msgid "This theme does not yet have a bootsplash in %s !" msgstr "هذه السمة ليس لها bootsplash في %s !" #: ../../pkgs.pm:1 #, c-format msgid "nice" msgstr "ظريف" #: ../../Xconfig/test.pm:1 #, c-format msgid "Leaving in %d seconds" msgstr "ستتم المغادرة في %d ثوان" #: ../../network/modem.pm:1 #, c-format msgid "Please choose which serial port your modem is connected to." msgstr "فضلاً اختر المنفذ التسلسلي المرتبط به المودم لديك." #: ../../standalone/drakperm:1 #, c-format msgid "Property" msgstr "الخاصية" #: ../../standalone/drakfont:1 #, c-format msgid "Ghostscript" msgstr "Ghostscript" #: ../../standalone/drakconnect:1 #, c-format msgid "LAN Configuration" msgstr "إعداد LAN" #: ../../lang.pm:1 #, c-format msgid "Ghana" msgstr "غانا" #: ../../standalone/drakbackup:1 #, c-format msgid "Path or Module required" msgstr "يُحتاج الى مسار أو وحدة" #: ../../standalone/drakfont:1 #, c-format msgid "Advanced Options" msgstr "خيارات متقدمة" #: ../../standalone/drakbackup:1 #, c-format msgid "View Configuration" msgstr "اعرض الإعدادات" #: ../../standalone/harddrake2:1 #, c-format msgid "Coma bug" msgstr "Coma bug" #: ../../help.pm:1 #, c-format msgid "" "At this point, you need to choose which partition(s) will be used for the\n" "installation of your Mandrake Linux system. If partitions have already been\n" "defined, either from a previous installation of GNU/Linux or by another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"%s\": this option deletes all partitions on the selected hard drive\n" "\n" " * \"%s\": this option enables you to automatically create ext3 and swap\n" "partitions in the free space of your hard drive\n" "\n" "\"%s\": gives access to additional features:\n" "\n" " * \"%s\": saves the partition table to a floppy. Useful for later\n" "partition-table recovery if necessary. It is strongly recommended that you\n" "perform this step.\n" "\n" " * \"%s\": allows you to restore a previously saved partition table from a\n" "floppy disk.\n" "\n" " * \"%s\": if your partition table is damaged, you can try to recover it\n" "using this option. Please be careful and remember that it doesn't always\n" "work.\n" "\n" " * \"%s\": discards all changes and reloads the partition table that was\n" "originally on the hard drive.\n" "\n" " * \"%s\": unchecking this option will force users to manually mount and\n" "unmount removable media such as floppies and CD-ROMs.\n" "\n" " * \"%s\": use this option if you wish to use a wizard to partition your\n" "hard drive. This is recommended if you do not have a good understanding of\n" "partitioning.\n" "\n" " * \"%s\": use this option to cancel your changes.\n" "\n" " * \"%s\": allows additional actions on partitions (type, options, format)\n" "and gives more information about the hard drive.\n" "\n" " * \"%s\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" "When defining the size of a partition, you can finely set the partition\n" "size by using the Arrow keys of your keyboard.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and the [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected)\n" "\n" " * Ctrl-d to delete a partition\n" "\n" " * Ctrl-m to set the mount point\n" "\n" "To get information about the different file system types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If it is not the case, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the case that different servers are available for your card, with or\n" "without 3D acceleration, you are then asked to choose the server that best\n" "suits your needs." msgstr "" "بطاقة الرسوم\n" "\n" " برنامج التثبيت يقوم باكتشاف و تهيئة البطاقة الموجودة على نظامك\n" "بشكل آلي. ان لم يحصل ذلك, يمكنك اختيار البطاقة التي لديك بالفعل\n" "من القائمة.\n" "\n" " في حال اذا كانت هناك خادمات رسومية مختلفة لبطاقتك, مع أو بدون\n" "تسريع للرسوم ثلاثية الأبعاد, يمكنك في هذه الحال اختيار الخادم الذي\n" "يناسب احتياجاتك أكثر." #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "There was an error installing packages:" msgstr "كان هناك خطأ في تثبيت الحزم:" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Lexmark inkjet configuration" msgstr "إعداد Lexmark Inkjet" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Undo" msgstr "تراجع" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Save partition table" msgstr "حفظ جدول التقسيم" #: ../../keyboard.pm:1 #, c-format msgid "Finnish" msgstr "الفنلندية" #: ../../lang.pm:1 #, c-format msgid "Macedonia" msgstr "مقدونيا" #: ../../any.pm:1 #, c-format msgid "" "The per-user sharing uses the group \"fileshare\". \n" "You can use userdrake to add a user to this group." msgstr "" "المشاركة لكل مستخدم تستخدم المجموعة \"fileshare\".\n" "يمكنك أن تستخدم userdrake لإضافة مستخدم في هذه المجموعة." #: ../../keyboard.pm:1 #, c-format msgid "Slovenian" msgstr "السلوفينية" #: ../../security/help.pm:1 #, c-format msgid "" "Authorize:\n" "\n" "- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if " "set to \"ALL\",\n" "\n" "- only local ones if set to \"LOCAL\"\n" "\n" "- none if set to \"NONE\".\n" "\n" "To authorize the services you need, use /etc/hosts.allow (see hosts.allow" "(5))." msgstr "" "تمكين الصلاحية:\n" "\n" "- لكل الخدمات التي يتم التحكم بها عن طريق tcp_wrappers (انظر صقحة دليل hosts." "deny(5) )اذا تم التعيين الى \"ALL\",\n" "\n" "- الملفات المحلية فقط اذا تم التعيين الى \"LOCAL\"\n" "\n" "- لا شئ اذا تم التعيين الى \"NONE\".\n" "\n" "لتمكين صالحية الخدمات التي تريدها, استخدم ملف /etc/hosts.allow (انظر hosts." "allow(5))." #: ../../lang.pm:1 #, c-format msgid "Libya" msgstr "ليبيا" #: ../../standalone/drakgw:1 #, c-format msgid "Configuring scripts, installing software, starting servers..." msgstr "جاري إعداد النصوص البرمجية و تثبيت البرمجيات و بدء الخدمات..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer on parallel port #%s" msgstr "الطابعة على المنفذ المتوازي #%s" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Burn to CD" msgstr "" "\n" "- انسخ الى قرص مدمج" #: ../../any.pm:1 #, c-format msgid "Table" msgstr "الجدول" #: ../../fs.pm:1 #, c-format msgid "I don't know how to format %s in type %s" msgstr "لا أعرف كيف أجهز %s في النوع %s" #: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 #, c-format msgid "Model" msgstr "الطراز" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "USB printer #%s" msgstr "طابعة USB #%s" #: ../../standalone/drakTermServ:1 #, c-format msgid "Stop Server" msgstr "أوقف الخادم" #: ../../standalone/drakboot:1 #, c-format msgid "" "\n" "Select the theme for\n" "lilo and bootsplash,\n" "you can choose\n" "them separately" msgstr "" "\n" "اختر سمة\n" "Lilo و bootsplash,\n" "يمكنك اختيارهم\n" "بشكل منفصل" #: ../../harddrake/data.pm:1 #, c-format msgid "Modem" msgstr "المودم" #: ../../lang.pm:1 #, c-format msgid "Tuvalu" msgstr "توفالو" #: ../../help.pm:1 ../../network/netconnect.pm:1 #, c-format msgid "Use auto detection" msgstr "استخدم التحقق الآلي" #: ../../services.pm:1 #, c-format msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" "يقوم GPM بإضافة دعم الفأرة لتطبيقات Linux في الوضع النصي مثل\n" "Midnight Commander. اضافة الى ذلك فإنه يسمح بعمليات القص و اللصق في سطر " "الأوامر,\n" "كما يتضمن دعم القوائم المختصرة في سطر الأوامر." #: ../../standalone/drakconnect:1 #, c-format msgid "Started on boot" msgstr "يتم بدءه عند الإقلاع" #: ../advertising/12-mdkexpert.pl:1 #, c-format msgid "" "Join the MandrakeSoft support teams and the Linux Community online to share " "your knowledge and help others by becoming a recognized Expert on the online " "technical support website:" msgstr "" "التحق بفريق الدعم الفني في MandrakeSoft و مجتمع Linux على الإنترنت لمشاركة " "معلوماتك و مساعدة الآخرين بأن تصبح خبيراً معتمَداً في موقعنا للدعم الفني على " "الإنترنت:" #: ../../security/l10n.pm:1 #, c-format msgid "No password aging for" msgstr "لا تقاد لكلمة المرور لـ" #: ../../standalone/draksec:1 #, c-format msgid "" "The following options can be set to customize your\n" "system security. If you need an explanation, look at the help tooltip.\n" msgstr "" "يمكن تعيين الخيارات التالية لتخصيص\n" "أمن النظام. اذا كنت تحتاج الى مزيد من الشرح, الق نظرة على المساعدة.\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Automatically find available printers on remote machines" msgstr "اعثر على الطابعات الموجودة على الماكينات البعيدة آلياً" #: ../../lang.pm:1 #, c-format msgid "East Timor" msgstr "تيمور الشرقية" #: ../../standalone/drakbackup:1 #, c-format msgid "On Tape Device" msgstr "على الشريط" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Save to Tape on device: %s" msgstr "" "\n" "- احفظ الى الشريط على الجهاز: %s" #: ../../standalone/drakbackup:1 #, c-format msgid "Login name" msgstr "اسم الدخول" #: ../../security/l10n.pm:1 #, c-format msgid "Report unowned files" msgstr "قم بتقرير الملفات الغير مملوكة" #: ../../standalone/drakconnect:1 #, c-format msgid "Del profile..." msgstr "احذف التشكيل..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing Foomatic..." msgstr "جاري تثبيت Foomatic..." #: ../../standalone/XFdrake:1 #, c-format msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "يرجى تسجيل الخروج ثم استخدم Ctrl-Alt-BackSpace" #: ../../network/netconnect.pm:1 #, c-format msgid "detected" msgstr "تم اكتشافه" #: ../../network/netconnect.pm:1 #, c-format msgid "The network needs to be restarted. Do you want to restart it ?" msgstr "يجب اعادة تشغيل الشبكة. هل تريد اعادة تشغيلها ؟" #: ../../standalone/drakbug:1 #, c-format msgid "Package: " msgstr "الجزمة: " #: ../../standalone/drakboot:1 #, c-format msgid "Can't write /etc/sysconfig/bootsplash." msgstr "تعذرت كتابة /etc/sysconfig/bootsplash." #: ../../printer/printerdrake.pm:1 #, c-format msgid "SECURITY WARNING!" msgstr "تحذير أمني!" #: ../../standalone/drakfont:1 #, c-format msgid "StarOffice" msgstr "StarOffice" #: ../../standalone/drakboot:1 #, c-format msgid "No, I don't want autologin" msgstr "لا, لا أريد دخولا أليا" #: ../../standalone/drakbug:1 #, c-format msgid "Windows Migration tool" msgstr "أداة الإنتقال من Windows" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "All languages" msgstr "كل اللغات" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Removing %s" msgstr "جاري ازالة %s" #: ../../standalone/drakTermServ:1 #, c-format msgid "%s not found...\n" msgstr "تعذر ايجاد %s...\n" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Testing your connection..." msgstr "جاري اختبار الوصلة..." #: ../../standalone/harddrake2:1 #, c-format msgid "Cache size" msgstr "حجم الذاكرة المخبئية" #: ../../security/level.pm:1 #, c-format msgid "" "Passwords are now enabled, but use as a networked computer is still not " "recommended." msgstr "كلمات المرور ممكّنة الآن, لكن الاستخدام كحاسب في شبكة يزال غير مفضّل." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Start sector: " msgstr "قطاع البداية: " #: ../../lang.pm:1 #, c-format msgid "Congo (Brazzaville)" msgstr "الكونغو برازافيل" #: ../../standalone/drakperm:1 #, c-format msgid "Read" msgstr "قراءة" #: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1 #, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "الحزمة %s يجب أن تُثبّت. هل تريد تثبيتها؟" #: ../../lang.pm:1 #, c-format msgid "Seychelles" msgstr "جزر سيشل" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Printerdrake has compared the model name resulting from the printer auto-" "detection with the models listed in its printer database to find the best " "match. This choice can be wrong, especially when your printer is not listed " "at all in the database. So check whether the choice is correct and click " "\"The model is correct\" if so and if not, click \"Select model manually\" " "so that you can choose your printer model manually on the next screen.\n" "\n" "For your printer Printerdrake has found:\n" "\n" "%s" msgstr "" "قام Printerdrake بمقارنة اسم الطراز الناتج عن التحقق الآلي من الطابعات مع " "الطرازات الموجودة في قاعدة بيانات الطابعات للحصول على أفضل توافق. هذا " "الإختيار قد يكون خاطئاً, خصوصاً اذا كانت الطابعة غير موجودة اطلاقاً في قاعدة " "بيانات الطابعات. لذا تأكد اذ كان اختيارك صحيحاً و انقر \"الطراز صحيح\", أما " "ان لم يكن الطاز صحيحاً, انقر \"اختر الطراز يدوياً\" كي يتسنى لك اختيار طراز " "طابعتك يدوياً على الشاشة التالية.\n" "\n" "لطابعتك وجد Printerdrake:\n" "\n" "%s" #: ../../standalone/drakbackup:1 #, c-format msgid "Bad password on %s" msgstr "كلمة مرور سيئة على %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "There is one unknown printer directly connected to your system" msgstr "" "\n" "توجد طابعة غير معروفة متصلة مباشرةً بنظامك" #: ../../keyboard.pm:1 #, c-format msgid "Right Control key" msgstr "مفتاح Control الأيمن" #: ../../network/tools.pm:1 #, fuzzy, c-format msgid "" "Insert a FAT formatted floppy in drive %s with %s in root directory and " "press %s" msgstr "أدخل قرص مرن مجهز على نظام ملفات FAT في السواقة %s" #: ../../lang.pm:1 #, c-format msgid "Zambia" msgstr "زامبيا" #: ../../security/level.pm:1 #, c-format msgid "Security Administrator (login or email)" msgstr "مدير النظام (اسم الدخول أو البردي الألكتروني)" #: ../../standalone/drakgw:1 #, c-format msgid "Sorry, we support only 2.4 kernels." msgstr "آسفون, نحن ندعم اصدارات النواة 2.4" #: ../../keyboard.pm:1 #, c-format msgid "Romanian (qwerty)" msgstr "الرومانية (qwertz)" #: ../../standalone/drakbackup:1 #, c-format msgid "Under Devel ... please wait." msgstr "تحت التطوير ... انتظر فضلا" #: ../../lang.pm:1 #, c-format msgid "Egypt" msgstr "مصر" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Czech Republic" msgstr "جمهورية التشيك" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Sound card" msgstr "بطاقة الصوت" #: ../../standalone/drakfont:1 #, c-format msgid "Import Fonts" msgstr "استيراد الخطوط" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "" "You have one big MicroSoft Windows partition.\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" "لديك تجزئة Microsofr Windows كبيرة.\n" "اقترح أن تغير حجم هذه التجزئة\n" "(اضغط عليها ثم اختر \"تغيير الحجم\")" #: ../../standalone/drakfont:1 #, c-format msgid "Suppress Temporary Files" msgstr "أبطل الملفات المؤقتة" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Congratulations, the network and Internet configuration is finished.\n" "\n" msgstr "" "تهانينا, انتهت تهيئة الشبكة و الإنترنت.\n" "\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Change partition type" msgstr "غير نوع التجزئة" #: ../../help.pm:1 #, c-format msgid "" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "hardware. Choose the one that best suits your needs (you will be able to\n" "change that after installation though). A sample of the chosen\n" "configuration is shown in the monitor." msgstr "" "دقة العرض\n" "\n" " يمكنك اختيار دقة العرض و عمق الألوان في الحدود\n" "المتوفرة للعتاد. اختر تلك التي تناسب احتياجاتك (لا تزال\n" "تستطيع تغيير تلك الخيارات بعد التثبيت). يتم عرض عينة\n" "من التهيئة المختارة على الشاشة." #: ../../standalone/draksec:1 #, c-format msgid "Network Options" msgstr "خيارات شبكة" #: ../../security/l10n.pm:1 #, c-format msgid "Enable msec hourly security check" msgstr "تمكين اختبارات msec الأمنية كل ساعة" #: ../../standalone/drakboot:1 #, c-format msgid "" "Display theme\n" "under console" msgstr "" "اعرض السمات\n" "في سطر الأوامر" #: ../../printer/cups.pm:1 #, c-format msgid "(on %s)" msgstr "(على %s)" #: ../../mouse.pm:1 #, c-format msgid "MM Series" msgstr "MM Series" #: ../../security/level.pm:1 #, c-format msgid "" "A library which defends against buffer overflow and format string attacks." msgstr "مكتبة تحمي من هجمات buffer overflow و format string" #: ../../standalone/net_monitor:1 #, c-format msgid "average" msgstr "متوسط" #: ../../printer/printerdrake.pm:1 #, c-format msgid "New printer name" msgstr "اسم الطابعة الجديدة" #: ../../fs.pm:1 #, c-format msgid "" "Allow an ordinary user to mount the file system. The\n" "name of the mounting user is written to mtab so that he can unmount the " "file\n" "system again. This option implies the options noexec, nosuid, and nodev\n" "(unless overridden by subsequent options, as in the option line\n" "user,exec,dev,suid )." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Equatorial Guinea" msgstr "غينيا الإستوائية" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup System" msgstr "نظام المساعد" #: ../../standalone/drakbackup:1 #, c-format msgid "Build Backup" msgstr "ابني النسخة الإحتياطية" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\" or \"%s \".\n" msgstr "لطباعة ملف من سطر الأوامر استخدم الأمر \"%s أو \"%s \".\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Currently, no alternative possibility is available" msgstr "حالياً لا يوجد احتمال بديل" #: ../../keyboard.pm:1 #, c-format msgid "Romanian (qwertz)" msgstr "الرومانية (qwertz)" #: ../../standalone/drakTermServ:1 #, c-format msgid "Write Config" msgstr "اكتب الإعدادات" #: ../../services.pm:1 #, c-format msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" "مراقب routed يسمح بتحديث جدول موجه IP الآلي (IP router table) عن طريق\n" "بروتوكول RIP. بينما يستخدم RIP على الشبكات الصغيرة, تحتاج الشبكات الأكبر\n" "الى بروتوكولات توجيه معقدة أكثر." #: ../../lang.pm:1 #, c-format msgid "Kiribati" msgstr "كيريباتي" #: ../../mouse.pm:1 #, fuzzy, c-format msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation" msgstr "Logitech Mouse (serial, old C7 type)" #: ../../standalone/drakbackup:1 #, c-format msgid "Other (not drakbackup) keys in place already" msgstr "مفاتيح أخرى (غير drakbackup) موجودة مسبقاً" #: ../../help.pm:1 #, c-format msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" "on which all the graphical environments (KDE, GNOME, AfterStep,\n" "WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n" "\n" "You will be presented with a list of different parameters to change to get\n" "an optimal graphical display: Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If it is not the case, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the case that different servers are available for your card, with or\n" "without 3D acceleration, you are then asked to choose the server that best\n" "suits your needs.\n" "\n" "\n" "\n" "Monitor\n" "\n" " The installer will normally automatically detect and configure the\n" "monitor connected to your machine. If it is incorrect, you can choose from\n" "this list the monitor you actually have connected to your computer.\n" "\n" "\n" "\n" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "hardware. Choose the one that best suits your needs (you will be able to\n" "change that after installation though). A sample of the chosen\n" "configuration is shown in the monitor.\n" "\n" "\n" "\n" "Test\n" "\n" " the system will try to open a graphical screen at the desired\n" "resolution. If you can see the message during the test and answer \"%s\",\n" "then DrakX will proceed to the next step. If you cannot see the message, it\n" "means that some part of the autodetected configuration was incorrect and\n" "the test will automatically end after 12 seconds, bringing you back to the\n" "menu. Change settings until you get a correct graphical display.\n" "\n" "\n" "\n" "Options\n" "\n" " Here you can choose whether you want to have your machine automatically\n" "switch to a graphical interface at boot. Obviously, you want to check\n" "\"%s\" if your machine is to act as a server, or if you were not successful\n" "in getting the display configured." msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "Browse" msgstr "استعرض" #: ../../harddrake/data.pm:1 #, c-format msgid "CDROM" msgstr "القرص المدمج" #: ../../network/tools.pm:1 #, c-format msgid "Do you want to try to connect to the Internet now?" msgstr "هل تريد أن تحاول أن تتصل بالإنترنت الآن؟" #: ../../keyboard.pm:1 #, c-format msgid "Belgian" msgstr "البلجيكية" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Do you have an ISA sound card?" msgstr "هل لديك بطاقة صوت ISA؟" #: ../../network/ethernet.pm:1 #, c-format msgid "" "No ethernet network adapter has been detected on your system.\n" "I cannot set up this connection type." msgstr "" "لم يتم اكتشاف أي موائم شبكة ايثرنت على نظامك.\n" "لا يمكنني اعداد نوع الإتصال هذا." #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Windows" msgstr "Windows" #: ../../common.pm:1 #, c-format msgid "Can't make screenshots before partitioning" msgstr "لا يمكنني غمل لقطات للشاشة قبل التجزئة" #: ../../standalone/drakbackup:1 #, c-format msgid "Host Name" msgstr "اسم المستضيف" #: ../../standalone/logdrake:1 #, c-format msgid "/File/Save _As" msgstr "/ملف/حفظ _باسم" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To get access to printers on remote CUPS servers in your local network you " "only need to turn on the \"Automatically find available printers on remote " "machines\" option; the CUPS servers inform your machine automatically about " "their printers. All printers currently known to your machine are listed in " "the \"Remote printers\" section in the main window of Printerdrake. If your " "CUPS server(s) is/are not in your local network, you have to enter the IP " "address(es) and optionally the port number(s) here to get the printer " "information from the server(s)." msgstr "" "للوصول الى الطابعات على خادمات CUPS البعيدة في شبكتك المحلية تحتاج فقط الى " "تشغيل خيار \"اعثر على الطابعات المتوفرة على الماكينات البعيدة\"; ستقوم " "خادمات CUPS بإعلام ماكينتك عن الطابعات الموجودة لديها. كافة الطابعات التي تم " "التعرف عليها من قِبل ماكينتك موجودة في قسم \"الطابعات البعيدة\" على نافذة " "Printerdrake الرئيسية. اذا لم تكن خادمات CUPS في شبكتك المحلية, فعليك أن " "تقوم بإدخال عناوين IP و أرقام المنافذ (اختياري) للحصول على معلومات الطابعات " "من الخادمات." #: ../../standalone/scannerdrake:1 #, c-format msgid "%s is not in the scanner database, configure it manually?" msgstr "%s غير موجود في قاعدة بيانات الماسحات الضوئية, هل تريد تهيئته يدوياً؟" #: ../../any.pm:1 #, c-format msgid "Delay before booting default image" msgstr "توقيت ما قبل اقلاع الصورة الافتراضية" #: ../../any.pm:1 #, c-format msgid "Restrict command line options" msgstr "تشديد خيارات سطر الأوامر" #: ../../standalone/drakxtv:1 #, c-format msgid "East Europe" msgstr "أوروبّا الشّرقيّة" #: ../../help.pm:1 ../../install_interactive.pm:1 #, c-format msgid "Use free space" msgstr "استعمل المساحة الفارغة" #: ../../network/adsl.pm:1 #, c-format msgid "use dhcp" msgstr "استخدم dhcp" #: ../../standalone/logdrake:1 #, c-format msgid "Mail alert" msgstr "تنبية بريدي" #: ../../network/tools.pm:1 #, c-format msgid "Internet configuration" msgstr "اعدادات الإنترنت" #: ../../lang.pm:1 #, c-format msgid "Uzbekistan" msgstr "أوزبكستان" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Detected %s" msgstr "تم التحقق من %s" #: ../../standalone/harddrake2:1 #, c-format msgid "/Autodetect _printers" msgstr "/تحقق آلي من ال_طابعات" #: ../../interactive.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1 #, c-format msgid "Finish" msgstr "إنتهاء" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Show automatically selected packages" msgstr "أظهر الحزم المختارة ألياً" #: ../../lang.pm:1 #, c-format msgid "Togo" msgstr "توجو" #: ../../standalone/harddrake2:1 #, c-format msgid "CPU flags reported by the kernel" msgstr "CPU flags reported by the kernel" #: ../../standalone/drakTermServ:1 #, c-format msgid "Something went wrong! - Is mkisofs installed?" msgstr "حصل شئ خطأ! - هل تم تثبيت mkisofs؟" #: ../../Xconfig/card.pm:1 #, c-format msgid "16 MB" msgstr "16 ميغابايت" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Please try again" msgstr "رجاء جاول مرة أخرى" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The model is correct" msgstr "الطراز صحيح" #: ../../install_interactive.pm:1 #, c-format msgid "FAT resizing failed: %s" msgstr "فشل تغيير حجم FAT: %s" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 #: ../../install_steps_interactive.pm:1 #, c-format msgid "Individual package selection" msgstr "اختيار مفرد للحزم" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "This partition is not resizeable" msgstr "هذا التقسيم غير قابل لتغيير الحجم" #: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1 #, c-format msgid "Location" msgstr "المكان" #: ../../standalone/drakxtv:1 #, c-format msgid "USA (cable-hrc)" msgstr "الولايات المتّحدة الأمريكيّة (cable-hrc)" #: ../../lang.pm:1 #, c-format msgid "Guatemala" msgstr "غواتيمالا" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Journalised FS" msgstr "Journalised FS" #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "Ethernet cards promiscuity check" msgstr "" "Arguments: (arg)\n" "\n" "Activate/Disable ethernet cards promiscuity check." #: ../../standalone/scannerdrake:1 #, c-format msgid "This machine" msgstr "هذه الماكينة" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "حرف سواقة DOS: %s (مجرد تخمين)\n" #: ../../lang.pm:1 #, c-format msgid "Bahrain" msgstr "البحرين" #: ../../standalone/drakbackup:1 #, c-format msgid "Select the files or directories and click on 'OK'" msgstr "اختر الملفات أو الأدلة ثم انقر 'أضف'" #: ../../standalone/drakfloppy:1 #, c-format msgid "omit scsi modules" msgstr "SCSI اهمل وحدات ال" #: ../../standalone/harddrake2:1 #, c-format msgid "family of the cpu (eg: 6 for i686 class)" msgstr "عائلة المعالح (مثلا: 6 لفئة i686)" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Because you are doing a network installation, your network is already " "configured.\n" "Click on Ok to keep your configuration, or cancel to reconfigure your " "Internet & Network connection.\n" msgstr "" "لأنك تقوم بالتثبيت عبر الشبكة, فقد تمت تهيئة الشبكة مسبقاً.\n" "انقر موافق لحفظ التهيئة الخاصة بك, أو انقر الغاء لإعادة تهيئة وصلات الإنترنت " "و الشبكة.\n" #: ../../security/l10n.pm:1 #, c-format msgid "Run the daily security checks" msgstr "شغّل الاختبارات الأمنية اليومية" #: ../../Xconfig/various.pm:1 #, c-format msgid "Keyboard layout: %s\n" msgstr "لوحة المفاتيح: %s\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Here you can choose whether the printers connected to this machine should be " "accessable by remote machines and by which remote machines." msgstr "" "هنا يمكنك أن تختار اذا كان يجب للطابعات المتصلة بهذه الماكينة أن تكون متوفرة " "للماكينات الأخرى على الشبكة." #: ../../keyboard.pm:1 #, c-format msgid "Maltese (US)" msgstr "المالطية (أمريكا)" #: ../../standalone/drakfloppy:1 #, c-format msgid "The creation of the boot floppy has been successfully completed \n" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" "تحمّل و تزيل تحميل كل نقاط تحميل أنظمة ملفات الشبكة (NFS)و SMB (مدير\n" "الشبكة المحلية/Windows) و NCP (NetWare)." #: ../../standalone/drakconnect:1 #, c-format msgid "Launch the wizard" msgstr "شغّل المعالج" #: ../../harddrake/data.pm:1 #, c-format msgid "Tvcard" msgstr "بطاقة التلفاز" #: ../../help.pm:1 #, c-format msgid "Toggle between normal/expert mode" msgstr "التغيير الى الوضع العادي/وضع الخبير" #: ../../standalone/drakfloppy:1 #, c-format msgid "Size" msgstr "حجم" #: ../../help.pm:1 #, c-format msgid "GRUB" msgstr "GRUB" #: ../../lang.pm:1 #, c-format msgid "Greenland" msgstr "غرينلاند" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan+/FirstMouse+" msgstr "Logitech MouseMan+/FirstMouse+" #: ../../standalone/drakbackup:1 #, c-format msgid "Thursday" msgstr "الخميس" #: ../../standalone/drakbackup:1 #, c-format msgid "Not the correct tape label. Tape is labelled %s." msgstr "علامة الشريط ليست العلامة الصحيحة. علامة الشريط هي %s." #: ../../standalone/drakgw:1 #, c-format msgid "" "The setup of Internet Connection Sharing has already been done.\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" "تم عمل مشاركة الإتصال بالإنترنت مسبقاً.\n" "و هي ممكّنة حالياً.\n" "\n" "ماذا تريد أن تفعل؟" #: ../../standalone/drakTermServ:1 #, c-format msgid "Delete All NBIs" msgstr "احذف كل NBI" #: ../../help.pm:1 #, c-format msgid "" "This dialog allows you to fine tune your bootloader:\n" "\n" " * \"%s\": there are three choices for your bootloader:\n" "\n" " * \"%s\": if you prefer grub (text menu).\n" "\n" " * \"%s\": if you prefer LILO with its text menu interface.\n" "\n" " * \"%s\": if you prefer LILO with its graphical interface.\n" "\n" " * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n" "you prefer, the bootloader can be installed on the second hard drive\n" "(\"%s\"), or even on a floppy disk (\"%s\");\n" "\n" " * \"%s\": after a boot or a reboot of the computer, this is the delay\n" "given to the user at the console to select a boot entry other than the\n" "default.\n" "\n" "!! Beware that if you choose not to install a bootloader (by selecting\n" "\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n" "system! Be sure you know what you are doing before changing any of the\n" "options. !!\n" "\n" "Clicking the \"%s\" button in this dialog will offer advanced options which\n" "are normally reserved for the expert user." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "if set, send the mail report to this email address else send it to root." msgstr "" "if set, send the mail report to this email address else send it to root." #: ../../Xconfig/card.pm:1 #, c-format msgid "Which configuration of XFree do you want to have?" msgstr "أي اعداد لـXFree تريد؟" #: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../diskdrake/interactive.pm:1 #, c-format msgid "More" msgstr "المزيد" #: ../../standalone/drakbackup:1 #, c-format msgid "" "This uses the same syntax as the command line program 'cdrecord'. 'cdrecord -" "scanbus' would also show you the device number." msgstr "" #: ../../security/level.pm:1 #, c-format msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which can " "accept\n" "connections from many clients. Note: if your machine is only a client on the " "Internet, you should choose a lower level." msgstr "" "بهذا المستوى الأمني, يكون استخدام هذا النظام كخادم يصبح ممكناً.\n" "المستوى الأمني عالٍ بشكل كافي لاستخدام هذا النظام كخادم يستطيع قبول\n" "اتصالات من عملاء كثيرين. ملحوظة: اذا كانت ماكينتك مجرد عميل على الإنترنت " "فالأجدر بك اختيار مستوى أمني أقل." #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Server Name" msgstr "اسم الخادم:" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Account Password" msgstr "كلمة المرور للحساب" #: ../../standalone/drakhelp:1 #, c-format msgid "" "%s cannot be displayed \n" ". No Help entry of this type\n" msgstr "" #: ../../any.pm:1 #, c-format msgid "" "You decided to install the bootloader on a partition.\n" "This implies you already have a bootloader on the hard drive you boot (eg: " "System Commander).\n" "\n" "On which drive are you booting?" msgstr "" "لقد قررت تثبيت محمّل الإقلاع على تجزئة.\n" "هذا يعني أنه لديك محمّل إقلاع على القرص الذي تستخدمه للإقلاع (مثال: System " "Commander).\n" "\n" "على أي قرص تقوم بالإقلاع؟" #: ../../install_interactive.pm:1 #, fuzzy, c-format msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful: this\n" "operation is dangerous. If you have not already done so, you\n" "first need to exit the installation, run \"chkdsk c:\" from a\n" "Command Prompt under Windows (beware, running graphical program\n" "\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n" "Command Prompt!), optionally run defrag, then restart the\n" "installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" "تحذير!\n" "\n" "DrakX سيقوم الآن بتغيير حجم تجزئة Windows. كن حذراً:\n" "هذه العملية خطرة. فإذا لم تكن فعلت ذلك,\n" "يجب عليك أولاً الخروج من التثبيت, ثم شغّل scandisk\n" "في Windows (و اختيارياً defrag), ثم أعد\n" "التثبيت. يجب عليك كذلك عمل نسخة احتياطية من بياناتك.\n" "عندما تكون متأكداً, انقر موافق." #: ../../keyboard.pm:1 #, c-format msgid "Tajik keyboard" msgstr "لوحة المفاتيح الطاجيكية" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can copy the printer configuration which you have done for the spooler %" "s to %s, your current spooler. All the configuration data (printer name, " "description, location, connection type, and default option settings) is " "overtaken, but jobs will not be transferred.\n" "Not all queues can be transferred due to the following reasons:\n" msgstr "" "يمكنك نقل تهيئة الطابعة التي تم عملها للـSpooler %s الى %s, الـspooler " "الحالي. كل بيانات التهيئة (اسم الطابعة, الوصف, المكان, نوع الوصلة, و خيارات " "الإعداد الإفتراضي) يتم أخذها, لكن لن يتم نقل الوظائف.\n" "لا يمكن نقل كل الصفوف للأسباب التالية:\n" #: ../../standalone/drakfont:1 #, c-format msgid "Font List" msgstr "قائمة الخطوط" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you don't see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you don't see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You appear to have an OldWorld or Unknown\n" " machine, the yaboot bootloader will not work for you.\n" "The install will continue, but you'll\n" " need to use BootX or some other means to boot your machine" msgstr "" "You appear to have an OldWorld or Unknown\n" " machine, the yaboot bootloader will not work for you.\n" "The install will continue, but you'll\n" " need to use BootX or some other means to boot your machine" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Select file" msgstr "اختر ملف" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Choose the network or host on which the local printers should be made " "available:" msgstr "اختر الشبكة أو المستضيف التي يجب أن تكون الطابعات المحلية متوفرة له:" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "These commands you can also use in the \"Printing command\" field of the " "printing dialogs of many applications, but here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" "يمكنك استخدام هذه الأوامر أيضاً في حقل \"أمر الطباعة\" في مربعات حوار الطباعة " "في العديد من التطبيقات, لكن لا تقم هنا بإعطاء اسم الملف لأن الملف المطلوب " "طباعته يتم اعطاؤه من قبل التطبيق.\n" #: ../../lang.pm:1 #, c-format msgid "Japan" msgstr "اليابان" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Print option list" msgstr "قائمة خيارات الطابعة" #: ../../standalone/localedrake:1 #, c-format msgid "The change is done, but to be effective you must logout" msgstr "تم عمل التغيير, و لكن ليتم تفعيله يجب عليك الخروج" #: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Country / Region" msgstr "البلد / المنطقة" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Search servers" msgstr "ابحث في أجهزة الخادم" #: ../../printer/printerdrake.pm:1 #, c-format msgid "NCP queue name missing!" msgstr "اسم صف NCP مفقود!" #: ../../standalone/net_monitor:1 #, c-format msgid "" "Warning, another internet connection has been detected, maybe using your " "network" msgstr "تحذير, تم ايجاد اتصال إنترنت آخر, ربما يكون يستخدم شبكتك" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "القرص المدمج المسمى \"%s\"" #: ../../standalone/drakbackup:1 #, c-format msgid "CDRW media" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" "Saves and restores system entropy pool for higher quality random\n" "number generation." #: ../advertising/07-server.pl:1 #, c-format msgid "Turn your computer into a reliable server" msgstr "اجعل جهازك خادماً يعتمد عليه" #: ../../security/l10n.pm:1 #, c-format msgid "Check empty password in /etc/shadow" msgstr "تحقق من وجود كلمة مرور فارغة في /etc/shadow." #: ../../network/network.pm:1 #, c-format msgid " (driver %s)" msgstr " (driver %s)" #: ../../services.pm:1 #, c-format msgid "Start when requested" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Loopback file(s):\n" " %s\n" msgstr "" "ملف(ات) Loopback:\n" " %s\n" #: ../../network/isdn.pm:1 #, c-format msgid "I don't know" msgstr "لا أعرف " #: ../../printer/main.pm:1 #, c-format msgid ", TCP/IP host \"%s\", port %s" msgstr ", مستضيف TCP/IP \"%s\", المنفذ \"%s\"" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "You are about to configure an Auto Install floppy. This feature is somewhat " "dangerous and must be used circumspectly.\n" "\n" "With that feature, you will be able to replay the installation you've " "performed on this computer, being interactively prompted for some steps, in " "order to change their values.\n" "\n" "For maximum safety, the partitioning and formatting will never be performed " "automatically, whatever you chose during the install of this computer.\n" "\n" "Do you want to continue?" msgstr "" "أنت على وشك تهيئة قرص للتثبيت الآلي. هذه الميزة خطرة بعض الشئ و يجب " "استخدامها بحذر.\n" "\n" "بهذه الميزة يمكنك اعادة عمل التثبيت الذي قمت به على هذا الكمبيوتر, مع تنبيهك " "لبعض الخطوات التي يجب عليك فيها تغيير القيم, حتى تتمكن من تغييرها.\n" "\n" "لأقصى حد من الأمان, ستتم تجزئة و تجهيز الأقراص الصلبة بشكل آلي, مثلما اخترت " "أثناء التثبيت على هذا الكمبيوتر.\n" "\n" "هل تريد المتابعة؟" #: ../../keyboard.pm:1 #, c-format msgid "Telugu" msgstr "التيلوغو" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "\n" "\n" "Your card currently use the %s\"%s\" driver (default driver for your card is " "\"%s\")" msgstr "" "\n" "\n" "بطاقتك تستخدم المشغل %s\"%s\" حالياً (المشغل الحالي لبطاقتك هو \"%s\")" #: ../../standalone/drakfont:1 #, c-format msgid "Post Uninstall" msgstr "ما بعد ازالة التثبيت" #: ../../standalone/net_monitor:1 #, c-format msgid "Connecting to Internet " msgstr "جاري الإتصال بالإنترنت" #: ../../standalone/scannerdrake:1 #, c-format msgid " (" msgstr " (" #: ../../standalone/harddrake2:1 #, c-format msgid "Cpuid level" msgstr "مستوى هوية المعالج" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Novell server \"%s\", printer \"%s\"" msgstr " على خادم Novell \"%s\", الطابعة \"%s\"" #: ../../keyboard.pm:1 #, c-format msgid "Mongolian (cyrillic)" msgstr "المنغولية (سيريلية)" #: ../../standalone/drakfloppy:1 #, c-format msgid "Add a module" msgstr "اضافة وحدة" #: ../../standalone/drakconnect:1 #, c-format msgid "Profile to delete:" msgstr "التشكيل المطلوب حذفه:" #: ../../standalone/net_monitor:1 #, c-format msgid "Local measure" msgstr "اجراء محلي" #: ../../network/network.pm:1 #, c-format msgid "Warning : IP address %s is usually reserved !" msgstr "تحذير: عنوان الـ IP %s عادة ما يكون محفوظاً !" #: ../../mouse.pm:1 #, c-format msgid "busmouse" msgstr "busmouse" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Create Etherboot Enabled Boot Images:\n" " \tTo boot a kernel via etherboot, a special kernel/initrd image must " "be created.\n" " \tmkinitrd-net does much of this work and drakTermServ is just a " "graphical \n" " \tinterface to help manage/customize these images. To create the " "file \n" " \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an " "include in \n" " \tdhcpd.conf, you should create the etherboot images for at least " "one full kernel." msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Account Login (user name)" msgstr "اسم المدخول للحساب" #: ../../standalone/harddrake2:1 #, c-format msgid "Fdiv bug" msgstr "Fdiv bug" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "drakfirewall configurator\n" "\n" "Make sure you have configured your Network/Internet access with\n" "drakconnect before going any further." msgstr "" "أداة تهيئة DrakFirewall\n" "\n" "تأكد من أنك قمت بتهيئة اتصالك بالشبكة/الإنترنت باستخدام\n" "drakconnect قبل المتابعة." #: ../../security/l10n.pm:1 #, c-format msgid "Accept broadcasted icmp echo" msgstr "اقبل broadcasted icmp echo" #: ../../lang.pm:1 #, c-format msgid "Uruguay" msgstr "أوروغواي" #: ../../lang.pm:1 #, c-format msgid "Benin" msgstr "بنين" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "SMB/Windows server \"%s\", share \"%s\"" msgstr "على خادم SMB/Windows \"%s\", المشاركة \"%s\"" #: ../../standalone/drakperm:1 #, c-format msgid "Path selection" msgstr "إختيار المسار" #: ../../standalone/scannerdrake:1 #, c-format msgid "Name/IP address of host:" msgstr "عنوان IP/اسم المستضيف:" #: ../../Xconfig/various.pm:1 #, c-format msgid "Monitor: %s\n" msgstr "الشاشة: %s\n" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Custom & system settings" msgstr "اعدادات مخصصة" #: ../../partition_table/raw.pm:1 #, c-format msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random, corrupted " "data." msgstr "" "هناك شئ سيئ يحصل للقرص. \n" "لقد فشل اختبار للتأكد من صحة البيانات. \n" "هذا يعني أن كتابة أي شئ على هذا القرص سينتهي ببيانات عشوائية و فاسدة." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer host name or IP missing!" msgstr "اسم مستضيف الطابعة أو الـ IP مفقود!" #: ../../standalone/drakbackup:1 #, c-format msgid "Please check all users that you want to include in your backup." msgstr "رجاء اختر كل المستخدمين الذين تريد تضمينهم في النسخ الإحتياطي." #: ../../standalone/scannerdrake:1 #, c-format msgid "" "The %s must be configured by printerdrake.\n" "You can launch printerdrake from the Mandrake Control Center in Hardware " "section." msgstr "" "الماسح الضوئي %s يجب اعداده عن طريق PrinterDrake.\n" "يمكن تشغيل PrinterDrake من مركز تحكم Mandrake في قسم العتاد." #: ../../../move/move.pm:1 #, fuzzy, c-format msgid "Key isn't writable" msgstr "XawTV غير مثبت!" #: ../../lang.pm:1 #, c-format msgid "Bangladesh" msgstr "بنغلاديش" #: ../../standalone/drakxtv:1 #, c-format msgid "Japan (cable)" msgstr "اليابان (cable)" #: ../../standalone/drakfont:1 #, c-format msgid "Initial tests" msgstr "الإختبارات الأولية" #: ../../network/isdn.pm:1 #, c-format msgid "Continue" msgstr "تابع" #: ../../standalone/drakbackup:1 #, c-format msgid "Custom Restore" msgstr "استعادة مخصصة" #: ../../standalone/drakbackup:1 #, c-format msgid "Saturday" msgstr "السبت" #: ../../help.pm:1 #, c-format msgid "" "\"%s\": if a sound card is detected on your system, it is displayed here.\n" "If you notice the sound card displayed is not the one that is actually\n" "present on your system, you can click on the button and choose another\n" "driver." msgstr "" "\"%s\": اذا تم اكتشاف بطاقة صوت على نظامك, سيتم عرضها\n" "هنا. اذا لاحظت أن بطاقة الصوت المعروضة هنا ليست تلك الموجودة\n" "فعلاً على نظامك, يمكنك النقر على الزر و اختيار مشغل\n" "آخر." #: ../../security/help.pm:1 #, c-format msgid "Set the root umask." msgstr "عين umask الخاص بالمستخدم الجذر" #: ../../install_any.pm:1 ../../partition_table.pm:1 #, c-format msgid "Error reading file %s" msgstr "خطأ في قراءة الملف %s" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Script-based" msgstr "Script-based" #: ../../harddrake/v4l.pm:1 #, c-format msgid "PLL setting:" msgstr "اعداد PLL:" #: ../../install_interactive.pm:1 ../../install_steps.pm:1 #, c-format msgid "You must have a FAT partition mounted in /boot/efi" msgstr "لديك تجزئة FAT تم تحميلها على /boot/efi" #: ../../printer/printerdrake.pm:1 #, c-format msgid " on " msgstr " على " #: ../../diskdrake/dav.pm:1 #, c-format msgid "The URL must begin with http:// or https://" msgstr "العنوان يجب أن يبدأ بـ http:// أو https://" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can specify directly the URI to access the printer. The URI must fulfill " "either the CUPS or the Foomatic specifications. Note that not all URI types " "are supported by all the spoolers." msgstr "" "يمكنك تحديد الـURI مباشرة للوصول الى الطابعة. الـURI يجب أن يتوافق مع " "متطلبات CUPS أو Foomatic. لاحط أنه ليست كل أنواع الـURI مدعومة من " "الـspoolers." #: ../../any.pm:1 #, c-format msgid "Other OS (SunOS...)" msgstr "نظام آخر (SunOS...)" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Install/Upgrade" msgstr "تثبيت/ترقية" #: ../../install_steps_gtk.pm:1 #, c-format msgid "%d packages" msgstr "%d حزم" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Costa Rica" msgstr "كوستاريكا" #: ../../standalone.pm:1 #, c-format msgid "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "Backup and Restore application\n" "\n" "--default : save default directories.\n" "--debug : show all debug messages.\n" "--show-conf : list of files or directories to backup.\n" "--config-info : explain configuration file options (for non-X " "users).\n" "--daemon : use daemon configuration. \n" "--help : show this message.\n" "--version : show version number.\n" msgstr "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "Backup and Restore application\n" "\n" "--default : save default directories.\n" "--debug : show all debug messages.\n" "--show-conf : list of files or directories to backup.\n" "--config-info : explain configuration file options (for non-X " "users).\n" "--daemon : use daemon configuration. \n" "--help : show this message.\n" "--version : show version number.\n" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Domain Authentication Required" msgstr "Domain Authentication Required" #: ../../security/level.pm:1 #, c-format msgid "Use libsafe for servers" msgstr "إستخدم libsafe للملقمات" #: ../../keyboard.pm:1 #, c-format msgid "Icelandic" msgstr "الآيسلاندية" #: ../../standalone.pm:1 #, c-format msgid "" "\n" "Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " msgstr "" "\n" "Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " #: ../../standalone/drakbackup:1 #, c-format msgid "" "Maximum size\n" " allowed for Drakbackup (MB)" msgstr "" "فضلاً أدخل الحجم الأقصى\n" " المسموح به لـDrakbackup (ميغابايت)" #: ../../loopback.pm:1 #, c-format msgid "Circular mounts %s\n" msgstr "Circular mounts %s\n" #: ../../standalone/drakboot:1 #, c-format msgid "Lilo/grub mode" msgstr "وضع Lilo/grub" #: ../../lang.pm:1 #, c-format msgid "Martinique" msgstr "مارتينيك" #: ../../standalone/drakbackup:1 #, c-format msgid "HardDrive / NFS" msgstr "HardDrive / NFS" #: ../../standalone/drakbackup:1 #, c-format msgid "Old user list:\n" msgstr "قائمة بالمستخدمين المتقادمين:\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Search Backups" msgstr "" #: ../../modules/parameters.pm:1 #, c-format msgid "a number" msgstr "رقم" #: ../../keyboard.pm:1 #, c-format msgid "Swedish" msgstr "السويدية" #. -PO: the %s is the driver type (scsi, network, sound,...) #: ../../modules/interactive.pm:1 #, c-format msgid "Which %s driver should I try?" msgstr "أي مشغل %s يجب أن استخدمه؟" #: ../../standalone/logdrake:1 #, c-format msgid "" "You will receive an alert if one of the selected services is no longer " "running" msgstr "سوف تستلم تنبيهاً إذا كانت أحد الخدمات المختارة غير عاملة." #: ../../standalone/drakbackup:1 #, c-format msgid "Weekday" msgstr "يوم الأسبوع" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Filesystem types:" msgstr "أنواع أنظمة الملفات:" #: ../../lang.pm:1 #, c-format msgid "Northern Mariana Islands" msgstr "جزر ماريانا الشمالية" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on HP JetDirect" msgstr ", جهاز متعدد الوظائف على HP JetDirect" #: ../../mouse.pm:1 #, c-format msgid "none" msgstr "لا شئ" #: ../../standalone/drakconnect:1 #, c-format msgid "" "Name of the profile to create (the new profile is created as a copy of the " "current one) :" msgstr "" "لإسم التشكيل الذي ستعمله (التشكيل الجديد يتم عمله كنسخة من التشكيل الحالي) :" #: ../../harddrake/data.pm:1 #, c-format msgid "Floppy" msgstr "القرص المرن" #: ../../standalone/drakfont:1 #, c-format msgid "Ghostscript referencing" msgstr "Ghostscript referencing" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Bootloader" msgstr "محمّل الإقلاع" #: ../../security/l10n.pm:1 #, c-format msgid "Authorize all services controlled by tcp_wrappers" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Move" msgstr "نقل" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Bootloader to use" msgstr "محمّل الإقلاع المُستخدم" #: ../../printer/printerdrake.pm:1 #, c-format msgid "SMB server host" msgstr "مستضيف خادم SMB" #: ../../standalone/drakTermServ:1 #, c-format msgid "Name Servers:" msgstr "خادمات الإسم:" #: ../../standalone/drakbackup:1 #, c-format msgid "Minute" msgstr "دقيقة" #: ../../install_messages.pm:1 #, c-format msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" "\n" "تحذير\n" "\n" "فضلاً اقرأ الشروط أدناه. اذا كنت لا توافق على أي\n" "جزء, لن يسمح لك بتثبيت وسيط القرص المدمج التالي. انقر 'رفض' \n" "لمتابعة التثبيت بدون هذه الوسائط.\n" "\n" "\n" "بعض المكونات الموجودة في وسيط القرص المدمج التالي غير محكومة\n" "بموجب ترخبص GPL أو الاتفاقيات المماثلة. كل مكون من تلك محكوم\n" "بموجب بنود و شروط الترخيص الخاص به تحديداً. \n" "فضلاً اقرأ باهتمام و أن تستجيب لهذه التراخيص قبل أن \n" "تستخدم أو تعيد توزيع هذه المكونات. \n" "مثل هذه التراخيص بشكل عام قد تمنع نقل أو نسخ (باستثناء النسخ الاحتياطي)\n" "أو اعادة توزيع أو ممارسة الهندسة العكسية أو فك تركيب أو فك تجميع أو تعديل\n" "المكون.\n" "أي انتهاك للاتفاقية سيتسبب في انهاء حقوقك تحت الترخيص\n" "المحدد بشكل فوري. الا اذا كان الترخيص يعطيك مثل هذه الحقوق.\n" "عادة لا يسمح لك بتثبيت هذه البرامج على أكثر من نظام واحد\n" "أو تعديله لكي يتم استخدامه على شبكة. في حال شكك فضلاً \n" "اتصل بشكل مباشر مع موزع أو مؤلف هذا المكون.\n" "النقل الى طرف ثالث أو نسخ هذه المكونات بما فيه \n" "وثائق المساعدة ممنوع عادةً.\n" "\n" "\n" "جميع الحقوق الخاصة بالمكونات الموجودة في وسيط القرص \n" "المدمج التالي مملوكة لأصحابها و محمية بموجب قوانين الملكية \n" "الفكرية المنطبقة على البرمجيات.\n" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "/_Expert mode" msgstr "وضعية الخبير" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remove this printer from Star Office/OpenOffice.org/GIMP" msgstr "احذف هذه الطابعة من Star Office/OpenOffice.org/GIMP" #: ../../services.pm:1 #, c-format msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "" "Linux Virtual Server, يستخدم لعمل خادم عالي الأداء\n" "و يعتمد عليه." #: ../../lang.pm:1 #, c-format msgid "Micronesia" msgstr "ميكرونيزيا" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "4 billion colors (32 bits)" msgstr "4 بليون لون (32 بت)" #: ../../steps.pm:1 #, c-format msgid "License" msgstr "الترخيص" #: ../../standalone/drakbackup:1 #, c-format msgid "This may take a moment to generate the keys." msgstr "قد يستغرق هذا بعض الوقت لتوليد المفاتيح." #: ../../standalone/draksec:1 #, c-format msgid "" "Here, you can setup the security level and administrator of your machine.\n" "\n" "\n" "The Security Administrator is the one who will receive security alerts if " "the\n" "'Security Alerts' option is set. It can be a username or an email.\n" "\n" "\n" "The Security Level menu allows you to select one of the six preconfigured " "security levels\n" "provided with msec. These levels range from poor security and ease of use, " "to\n" "paranoid config, suitable for very sensitive server applications:\n" "\n" "\n" "Poor: This is a totally unsafe but " "very\n" "easy to use security level. It should only be used for machines not " "connected to\n" "any network and that are not accessible to everybody.\n" "\n" "\n" "Standard: This is the standard " "security\n" "recommended for a computer that will be used to connect to the Internet as " "a\n" "client.\n" "\n" "\n" "High: There are already some\n" "restrictions, and more automatic checks are run every night.\n" "\n" "\n" "Higher: The security is now high " "enough\n" "to use the system as a server which can accept connections from many " "clients. If\n" "your machine is only a client on the Internet, you should choose a lower " "level.\n" "\n" "\n" "Paranoid: This is similar to the " "previous\n" "level, but the system is entirely closed and security features are at their\n" "maximum" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)" msgstr "التحقق الآلي من الطابعات (محلية, TCP/Socket, و SMB)" #: ../../network/adsl.pm:1 #, c-format msgid "Sagem (using pppoa) usb" msgstr "Sagem (using pppoa) usb" #: ../../install_any.pm:1 #, c-format msgid "" "An error occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" "لقد ظهر خطأ - لم يتم ايجاد أجهزة صالحة يمكن انشاء أنظمة ملفات جديدة. تأكد من " "العتاد الخاص بك لمعرفة شبب هذه المشكلة" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Starting the printing system at boot time" msgstr "بدء نظام الطباعة عند الإقلاع" #: ../../network/netconnect.pm:1 #, c-format msgid "Do you want to start the connection at boot?" msgstr "هل تريد بدء الوصلة عند الإقلاع؟" #: ../../standalone/harddrake2:1 #, c-format msgid "Processor ID" msgstr "هوية المعالج" #: ../../harddrake/sound.pm:1 #, c-format msgid "Sound trouble shooting" msgstr "حل مشاكل الصوت" #: ../../keyboard.pm:1 #, c-format msgid "Polish (qwerty layout)" msgstr "البولندية (qwerty layout)" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "/_Add Printer" msgstr "طابعة" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Drakbackup activities via CD:\n" "\n" msgstr "" "\n" "نشاطات Drakbackup عن طريق القرص المدمج:\n" "\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are about to install the printing system %s on a system running in the %" "s security level.\n" "\n" "This printing system runs a daemon (background process) which waits for " "print jobs and handles them. This daemon is also accessable by remote " "machines through the network and so it is a possible point for attacks. " "Therefore only a few selected daemons are started by default in this " "security level.\n" "\n" "Do you really want to configure printing on this machine?" msgstr "" "أنت على وشك تثبيت نظام الطباعة %s على نظام يعمل على المستوى الأمني %s.\n" "نظام الطباعة يشغّل مراقب (عملية خلفية) يقوم بانتظار وظائف الطباعة و يتعامل " "معها. هذا المراقب يمكن الوصول اليه عن من قِبل الماكينات البعيدة على الشبكة و " "لذا فقد يمكن أن يكون نقطة مبدئية لهجمات المخترقين. لهذا يتم اختيار القليل من " "المراقبات لتشغيلها افتراضياً على هذا المستوى الأمني.\n" "\n" "هل تريد فعلاً تهيئة الطباعة على هذه الماكينة؟" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Host \"%s\", port %s" msgstr "المستضيف \"%s\", المنفذ %s" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "This partition can't be used for loopback" msgstr "هذه التجزئة لا يمكن استخدامها لـloopback" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "File already exists. Use it?" msgstr "الملف موجود مسبقا, هل تريد استخدامه؟" #: ../../standalone/net_monitor:1 #, c-format msgid "received: " msgstr "مُستقبل: " #: ../../keyboard.pm:1 #, c-format msgid "Right Alt key" msgstr "مفتاح Alt الأيمن" #: ../../standalone/harddrake2:1 #, c-format msgid "the list of alternative drivers for this sound card" msgstr "قائمة المشغلات البديلة لبطاقة الصوت" #: ../../standalone/drakconnect:1 #, c-format msgid "Gateway" msgstr "Gateway" #: ../../lang.pm:1 #, c-format msgid "Tonga" msgstr "تونجو" #: ../../lang.pm:1 #, c-format msgid "Tunisia" msgstr "تونس" #: ../../standalone/scannerdrake:1 #, c-format msgid "Scanner sharing" msgstr "مشاركة الماسحات الضوئية" #: ../../standalone/drakconnect:1 #, c-format msgid "Profile: " msgstr "التشكيل:" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Click on a device in the left tree in order to display its information here." msgstr "انقر على جهاز في السلسلة اليسرى لعرض معلوماته هنا." #: ../../security/help.pm:1 #, c-format msgid "Allow/Forbid autologin." msgstr "اسمح/امنع الدخول التلقائي" #: ../../standalone/drakxtv:1 #, c-format msgid "XawTV isn't installed!" msgstr "XawTV غير مثبت!" #: ../../standalone/drakbackup:1 #, c-format msgid "Do not include critical files (passwd, group, fstab)" msgstr "لا تُضمّن الملفات المهمة (passws, group,fstab)" #: ../../standalone/harddrake2:1 #, c-format msgid "old static device name used in dev package" msgstr "اسم الجهاز القديم الساكن المستخدم في حزمة dev" #: ../../security/l10n.pm:1 #, c-format msgid "Enable the logging of IPv4 strange packets" msgstr "تمكين تسجيل حزم IPv4 الغريبة" #: ../../any.pm:1 #, c-format msgid "This label is already used" msgstr "هذه العلامة مستخدمة مسبقا" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer or connected directly to the network.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network printers when you don't need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "أهلاً بكم في معالج اعداد الطابعات\n" "هذا المعالج سيساعدك على تثبيت الطابعة/الطابعات الموصولة بهذا الكمبيوتر أو " "الموصولة مباشرةً بالشبكة.\n" "\n" "اذا كانت لديك طابعة/طابعات موصولة بهذه الماكينة, فضلاً قم بتوصيلها الى هذا " "الكمبيوتر و قم بتشغيلها كي يتم التحقق منها/منهم آلياً. أيضاً يجب أن تكون طابعة/" "طابعات الشبكة موصولة و مشغّلة.\n" "\n" "لاحظ أن التحقق الآلي من الطابعات على الشبكة قد يستغرق وقتاً أطول من التحقق " "الآلي من الطابعات الموصولة بهذه الماكينة فقط. لذا قم بتعطيل التحقق الآلي من " "طابعات الشبكة اذا لم تكن تحتاج الى هذه الميزة.\n" "\n" " انقر \"التالي\" عندما تكون مستعداً, و على \"الغاء\" اذا لم تكن تريد اعداد " "الطابعة/الطابعات الآن." #: ../../keyboard.pm:1 #, c-format msgid "Greek (polytonic)" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "بعد تهيئة التقسيم %s, فإن كل البيانات الموجودة على التجزئة ستفقد" #: ../../standalone/net_monitor:1 #, c-format msgid "Connection Time: " msgstr "وقت الإتصال:" #: ../../standalone/livedrake:1 #, c-format msgid "" "Please insert the Installation Cd-Rom in your drive and press Ok when done.\n" "If you don't have it, press Cancel to avoid live upgrade." msgstr "" "فضلا أدخل قرص التثبيت في سواقتك و اضغط موافق عندما تنتهي.\n" "إذا لم يكن قرص التثبيت لديك اضغط الغاء للإمتناع عن التحديث الحي." #: ../../standalone/drakperm:1 #, c-format msgid "Use group id for execution" msgstr "استخدم group id للتنفيذ" #: ../../any.pm:1 #, c-format msgid "Choose the default user:" msgstr "اختر المستخدم الافتراضي:" #: ../../lang.pm:1 #, c-format msgid "Gabon" msgstr "الغابون" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Printers on remote CUPS servers do not need to be configured here; these " "printers will be automatically detected." msgstr "" "\n" "لا تحتاج الى تهيئة الطابعات على خادمات CUPS البعيدة; هذه الكابعات يمكن " "اكتشلفها آلياً." #: ../../any.pm:1 #, c-format msgid "" "Mandrake Linux can support multiple languages. Select\n" "the languages you would like to install. They will be available\n" "when your installation is complete and you restart your system." msgstr "" "يدعم Mandrake Linux العديد من اللغات. اختر\n" "اللغات التي تريد تثبيتها. ستكون هذه متوفرةً عند\n" "اكتمال التثبيت و اعداة تشغيل النظام." #: ../../standalone/drakbackup:1 #, c-format msgid "Directory (or module) to put the backup on this host." msgstr "" "فضلاً أدخل الدليل (أو الوحدة) التي سيتم فيها وضع النسخة الإحتياطية على هذا " "المستضيف." #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Domain" msgstr "النطاق" #: ../../any.pm:1 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "حجم الذاكرة الدقيق عند الحاجة )تم ايجاد %d ميغابايت(" #: ../../help.pm:1 #, c-format msgid "" "LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n" "automated. DrakX will analyze the disk boot sector and act according to\n" "what it finds there:\n" "\n" " * if a Windows boot sector is found, it will replace it with a grub/LILO\n" "boot sector. This way you will be able to load either GNU/Linux or another\n" "OS.\n" "\n" " * if a grub or LILO boot sector is found, it will replace it with a new\n" "one.\n" "\n" "If it cannot make a determination, DrakX will ask you where to place the\n" "bootloader." msgstr "" "محمّلات اقلاع Linux هي LILO و grub. في العادة, هذه المرحلة\n" "آلية بالكامل. سيقوم DrakX بتحيل قطاع التحميل الخاص بالقرص\n" "و سيتصرف على حسب ما يجد هناك:\n" "\n" " * اذا تم ايجاد قطاع تحميل Windows فسيقوم برنامج التثبيت\n" "بتبديله بقطاع تحميل LILO/grub. بهذه الطريقة ستستطيع تحميل Linux أو\n" "أي نظام تشغيل آخر.\n" "\n" " * اذا تم ايجاد قطع تحميل LILO أو grub, سيتم ابداله بقطاع\n" "جديد.\n" "\n" "اذا لم يمكن التقرير فسيسألك DrakX عن المكان الذي تريد\n" "وضع محمّل الإقلاع فيه." #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider dns 2 (optional)" msgstr "DNS الثاني للموفر (اختياري)" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Boot device" msgstr "جهاز الإقلاع" #: ../../install_interactive.pm:1 #, c-format msgid "Which partition do you want to resize?" msgstr "أي تجزئة تريد تغيير حجمها؟" #: ../../lang.pm:1 #, c-format msgid "United States Minor Outlying Islands" msgstr "جزر الولايات المتحدة" #: ../../lang.pm:1 #, c-format msgid "Djibouti" msgstr "جيبوتي" #: ../../standalone/logdrake:1 #, c-format msgid "A tool to monitor your logs" msgstr "أداة لمراقبة سجلات نظامك" #: ../../network/netconnect.pm:1 #, c-format msgid "detected on port %s" msgstr "تم اكتشافه على المنفذ %s" #: ../../printer/data.pm:1 #, c-format msgid "LPD" msgstr "LPD" #: ../../Xconfig/various.pm:1 #, c-format msgid "Graphics card: %s\n" msgstr "بطاقة الشاشة: %s\n" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "/Set as _Default" msgstr " (افتراضي)" #: ../../security/l10n.pm:1 #, c-format msgid "Accept icmp echo" msgstr "" #: ../../bootloader.pm:1 #, c-format msgid "Yaboot" msgstr "Yaboot" #: ../../mouse.pm:1 #, fuzzy, c-format msgid "Logitech CC Series with Wheel emulation" msgstr "Logitech CC Series" #: ../../partition_table.pm:1 #, c-format msgid "Extended partition not supported on this platform" msgstr "التجزئات الممتدة غير مدعومة على هذه البيئة" #: ../../standalone/drakboot:1 #, c-format msgid "Splash selection" msgstr "اختيار الشاشات" #: ../../network/isdn.pm:1 #, c-format msgid "ISDN Configuration" msgstr "تهيئة ISDN" #: ../../printer/printerdrake.pm:1 #, c-format msgid "high" msgstr "مرتفع" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing" msgstr "مشاركة الإتصال بالإنترنت" #: ../../standalone/logdrake:1 #, c-format msgid "Choose file" msgstr "احتيار ملف" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Summary: " msgstr "ملخص" #: ../../network/shorewall.pm:1 #, c-format msgid "" "Warning! An existing firewalling configuration has been detected. You may " "need some manual fixes after installation." msgstr "" "تحذير! تم إيجاد إعداد جدار ناري موجود مسبقا. ربما تحتاج الى اصلاح يدوي بعد " "التثبيت." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing/Photo Card Access on \"%s\"" msgstr "Printing/Photo Card Access on \"%s\"" #: ../../security/l10n.pm:1 #, c-format msgid "Daily security check" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Do you want to enable printing on the printers mentioned above or on " "printers in the local network?\n" msgstr "" "هل تريد تمكين الطباعة على الطابعات المذكورة أعلاه أم على الطابعات في الشبكة " "المحلية؟\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer default settings" msgstr "اعدادات الطابعة الإفتراضية" #: ../../mouse.pm:1 #, c-format msgid "Generic PS2 Wheel Mouse" msgstr "Generic PS2 Wheel Mouse" #: ../../standalone/harddrake2:1 #, c-format msgid "" "the WP flag in the CR0 register of the cpu enforce write proctection at the " "memory page level, thus enabling the processor to prevent unchecked kernel " "accesses to user memory (aka this is a bug guard)" msgstr "" "the WP flag in the CR0 register of the cpu enforce write proctection at the " "memory page level, thus enabling the processor to prevent unchecked kernel " "accesses to user memory (aka this is a bug guard)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Removing old printer \"%s\"..." msgstr "جاري ازالة الطابعة القديمة \"%s\" ..." #: ../../standalone/harddrake2:1 #, c-format msgid "Select a device !" msgstr "اختر جهازاً!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remove selected server" msgstr "احذف الخادم المختار" #: ../../network/adsl.pm:1 #, c-format msgid "Sagem (using dhcp) usb" msgstr "Sagem (using dhcp) usb" #: ../../lang.pm:1 #, c-format msgid "French Southern Territories" msgstr "مناطق جنوب فرنسا" #: ../../standalone/harddrake2:1 #, c-format msgid "the vendor name of the processor" msgstr "اسم مصنّع المعالج" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Maintain %s:\n" " \tFor users to be able to log into the system from a diskless " "client, their entry in\n" " \t/etc/shadow needs to be duplicated in %s. drakTermServ\n" " \thelps in this respect by adding or removing system users from this " "file." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "All data on this partition should be backed-up" msgstr "كل البيانات على هذه التجزئة يجب حفظها احتياطيا" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Installing package %s" msgstr "جاري تثبيت الحزمة %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Checking device and configuring HPOJ..." msgstr "جاري التأكد من الجهاز و تهيئة HPOJ..." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "لكي تمتلك تجزئات أكثر, يرجى الغاء تجزئة كي تتمكن من عمل تجزئة ممتدة" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Your printer was configured automatically to give you access to the photo " "card drives from your PC. Now you can access your photo cards using the " "graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> " "\"MTools File Manager\") or the command line utilities \"mtools\" (enter " "\"man mtools\" on the command line for more info). You find the card's file " "system under the drive letter \"p:\", or subsequent drive letters when you " "have more than one HP printer with photo card drives. In \"MtoolsFM\" you " "can switch between drive letters with the field at the upper-right corners " "of the file lists." msgstr "" "تم تهيئة الطابعة آلياً لكي تعطيك القدرة على الوصول الى سواقات بطاقات الصور " "على جهازك الشخصي. يمكنك الآن الوصول الى بطاقات الصور باستخدام البرنامج " "الرسومي \"MToolsFM\" (القائمة: \"تطبيقات\" -> \"أدوات الملفات\" -> \"مدير " "ملفات MTools\") أو باستخدام أدوات \"mtools\" في سطر الأوامر (أدخل \"man " "mtools\" في سطر الأوامر لمزيد من المعلومات). يمكنك ايجاد نظام ملفات البطاقة " "تحت حرف السواقة \"p:\", أو حروف السواقات الأخرى اذا كانت لديك أكثر من طابعة " "HP مع سواقات بطاقات صور. في \"MToolsFM\" يمكنك التحويل بين حروف السواقات على " "الحقل الموجود في الركن الأيسر الى الأعلى في قوائم الملفات." #: ../../steps.pm:1 #, c-format msgid "Choose packages to install" msgstr "اختر الحزم التي ستُثبَّت" #: ../../install_interactive.pm:1 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "كل التجزئات و بياناتها ستضيع من على السواقة %s" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Your system does not have enough space left for installation or upgrade (%d " "> %d)" msgstr "لا يوجد في نظامك مساحة متبقة تكفي للتثبيت أو الترقية (%d > %d)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Every printer needs a name (for example \"printer\"). The Description and " "Location fields do not need to be filled in. They are comments for the users." msgstr "" "كل طابعة تحتاج الى اسم (مثال \"printer\"). حقول الوصف و المكان ليس من " "الضروري ملؤها. انها مجرد ملاحظات للمستخدمين." #: ../../help.pm:1 #, c-format msgid "" "\"%s\": clicking on the \"%s\" button will open the printer configuration\n" "wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n" "information on how to setup a new printer. The interface presented there is\n" "similar to the one used during installation." msgstr "" "\"%s\": النقر على \"%s\" سيفتح معالج تهيئة\n" "الطابعة. اقرأ الفضل المختص في ``دليل المبتدئ''\n" "لكزيد من المعلومات عن كيفية اعداد طابعة جديدة. الواجهة\n" "هناك مماثلة لتلك المستخدمة أثناء التثبيت." #: ../../lang.pm:1 #, c-format msgid "Bhutan" msgstr "بوتان" #: ../../standalone/drakgw:1 #, c-format msgid "Network interface" msgstr "واجهة الشبكة " #: ../../standalone/net_monitor:1 #, c-format msgid "Disconnection from Internet failed." msgstr "فشل قطع الإتصال بالإنترنت" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Reading printer data..." msgstr "جاري قراءة بيانات الطابعة..." #: ../../keyboard.pm:1 #, c-format msgid "Korean keyboard" msgstr "لوحة المفاتيح الكورية" #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Not connected" msgstr "غير متصل" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "No internet connection configured" msgstr "إعدادات الإتصال بالإنترنت" #: ../../keyboard.pm:1 #, c-format msgid "Greek" msgstr "اليونانية" #: ../../lang.pm:1 #, c-format msgid "Saint Kitts and Nevis" msgstr "سانت كيتس و نيفيس" #: ../../mouse.pm:1 #, fuzzy, c-format msgid "Generic 3 Button Mouse with Wheel emulation" msgstr "Generic 3 Button Mouse" #: ../../any.pm:1 #, c-format msgid "Enable OF Boot?" msgstr "تمكين اقلاع OF؟" #: ../../fsedit.pm:1 #, c-format msgid "You can't use JFS for partitions smaller than 16MB" msgstr "لا يمكنك استخدام JFS للتجزئات أصغر من 16 ميغابايت" #: ../../standalone/drakbackup:1 #, c-format msgid "Erase your RW media (1st Session)" msgstr "امسح الوسيط القابل لإعادة الكتابة (الجلسة الأولى)" #: ../../Xconfig/various.pm:1 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "انعاش الشاشة الرأسي: %s\n" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Mount point" msgstr "نقطة التحميل" #: ../../Xconfig/test.pm:1 #, c-format msgid "" "An error occurred:\n" "%s\n" "Try to change some parameters" msgstr "" "ظهر خطأ:\n" "%s\n" "حاول تغيير بعض المعاملات" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "TCP/IP host \"%s\", port %s" msgstr ", مستضيف TCP/IP \"%s\", المنفذ \"%s\"" #: ../../standalone/drakperm:1 #, c-format msgid "User :" msgstr "المستخدم :" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore system" msgstr "استعد النّظام" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "These are the machines on which the locally connected scanner(s) should be " "available:" msgstr "توحد ماكينات يجب أن تكون الماسحات الضوئية الموصولة محلياً متوفرة لها:" #: ../../standalone/drakpxe:1 #, c-format msgid "The DHCP end ip" msgstr "DHCP end ip" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Another one" msgstr "آخر" #: ../../standalone/drakbackup:1 #, c-format msgid "Drakbackup" msgstr "Drakbackup" #: ../../lang.pm:1 #, c-format msgid "Colombia" msgstr "كولومبيا" #: ../../standalone/drakgw:1 #, c-format msgid "" "Current configuration of `%s':\n" "\n" "Network: %s\n" "IP address: %s\n" "IP attribution: %s\n" "Driver: %s" msgstr "" "الإعداد الحالي لـ`%s':\n" "\n" "الشبكة: %s\n" "عنوان الـIP: %s\n" "صفة الـIP: %s\n" "المشغل: %s" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Plug'n Play" msgstr "Plug'n Play" #: ../../lang.pm:1 #, c-format msgid "Reunion" msgstr "ريونيون" #: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Details" msgstr "تفاصيل" #: ../../network/tools.pm:1 #, c-format msgid "For security reasons, it will be disconnected now." msgstr "لأسباب أمنية, سيتم قطع الإتصال الآن." #: ../../standalone/drakbug:1 #, c-format msgid "Synchronization tool" msgstr "DrakSync" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Checking your system..." msgstr "جاري التأكد من نظامك..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Print" msgstr "إطبع" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Insert the tape with volume label %s\n" " in the tape drive device %s" msgstr "" "أدخل الشريط بالعلامة %s\n" " في جهاز الشريط %s" #: ../../lang.pm:1 #, c-format msgid "Mongolia" msgstr "منغوليا" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Mounted\n" msgstr "محمل\n" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Configure CUPS" msgstr "تهيئة X" #: ../../help.pm:1 #, c-format msgid "Graphical Interface" msgstr "الواجهة الرسومية" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Users" msgstr "أعد المستخدمين " #: ../../install_steps_interactive.pm:1 #, c-format msgid "Encryption key for %s" msgstr "مفتاح التشفير لـ %s" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Do you want to recover your system?" msgstr "هل تريد استخدام aboot؟" #: ../../services.pm:1 #, c-format msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" "يقوم portmapper بإدارة اتصالات RPC, و التي تستخدم عن طريق\n" "بروتوكولات مثل NFS و NIS. خادم portmap من اللازم أن يعمل على الأجهزة\n" "التي تعمل كخادمات تستخدم البروتوكولات التي تستفيد من آلية عمل RPC." #: ../../standalone/harddrake2:1 #, c-format msgid "Detected hardware" msgstr "العتاد المُكتشف" #: ../../lang.pm:1 #, c-format msgid "Mauritius" msgstr "موريشيوس" #: ../../keyboard.pm:1 #, c-format msgid "Myanmar (Burmese)" msgstr "ميانمار (البورمية)" #: ../../fs.pm:1 #, c-format msgid "Enabling swap partition %s" msgstr "جاري تمكين تجزئة التبديل %s" #: ../../install_interactive.pm:1 #, c-format msgid "There is no FAT partition to use as loopback (or not enough space left)" msgstr "" "لا توجد تجزئة FAT لاستخدامها كـ loopback (أو لا توجد مساحة كافية متبقية)" #: ../../keyboard.pm:1 #, c-format msgid "Armenian (old)" msgstr "الأرمينية (قديم)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "A printer named \"%s\" already exists under %s. \n" "Click \"Transfer\" to overwrite it.\n" "You can also type a new name or skip this printer." msgstr "" "الطابعة المسماة \"%s\" موجودة مسبقا تحت %s. \n" "انقر \"انقل\" للكتابة فوقه.\n" "يمكنك كذلك كتابة اسم جديد أو تحطي هذه الطابعة." #: ../advertising/12-mdkexpert.pl:1 #, c-format msgid "" "Find the solutions of your problems via MandrakeSoft's online support " "platform." msgstr "" "اعثر على حلول لمشاكلك باستخدام بيئة الدعم الفني على الإنترنت في MandrakeSoft" #: ../../printer/printerdrake.pm:1 #, c-format msgid ", host \"%s\", port %s" msgstr ", المستضيف \"%s\", المنفذ %s" #: ../../lang.pm:1 #, c-format msgid "Monaco" msgstr "موناكو" #: ../../install_interactive.pm:1 #, c-format msgid "Partitioning failed: %s" msgstr "فشلت التجزئة: %s" #: ../../fs.pm:1 ../../swap.pm:1 #, c-format msgid "%s formatting of %s failed" msgstr "%s تجهيز %s قد فشل" #: ../../standalone/drakxtv:1 #, c-format msgid "Canada (cable)" msgstr "كندة (cable)" #: ../../standalone/drakfloppy:1 #, c-format msgid "Floppy creation completed" msgstr "اكتمل انشاء القرص المرن" #: ../../help.pm:1 #, c-format msgid "Upgrade" msgstr "ترقية" #: ../../help.pm:1 #, c-format msgid "Workstation" msgstr "محطة عمل" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Installing package %s\n" "%d%%" msgstr "" "جاري تثبيت الحزمة %s\n" "%d%%" #: ../../lang.pm:1 #, c-format msgid "Kyrgyzstan" msgstr "قيرغيزستان" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Multi-function device on USB" msgstr ", جهاز متعدد الوظائف على منفذ USB" #: ../../../move/move.pm:1 #, c-format msgid "" "We didn't detect any USB key on your system. If you\n" "plug in an USB key now, Mandrake Move will have the ability\n" "to transparently save the data in your home directory and\n" "system wide configuration, for next boot on this computer\n" "or another one. Note: if you plug in a key now, wait several\n" "seconds before detecting again.\n" "\n" "\n" "You may also proceed without an USB key - you'll still be\n" "able to use Mandrake Move as a normal live Mandrake\n" "Operating System." msgstr "" #: ../../help.pm:1 #, c-format msgid "With basic documentation" msgstr "مع وثائق المساعدة الأساسية" #: ../../services.pm:1 #, c-format msgid "Anacron is a periodic command scheduler." msgstr "Anacron أداة لتشغيل الأوامر في أوقات محددة." #: ../../install_interactive.pm:1 #, c-format msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" "يجب أن تكون لديك تجزئة جذرية.\n" "لهذا الغرض انشئ تجزئة (أو انقر على تجزئة موجودة).\n" "ثم اختر ``نقطة التحميل'' و اجعلها `/'" #: ../../lang.pm:1 #, c-format msgid "Western Sahara" msgstr "الصحراء الغربية" #: ../../network/network.pm:1 #, c-format msgid "Proxy should be http://..." msgstr "البروكسي يجب أن يكون http://..." #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "South Africa" msgstr "جنوب أفريقيا " #: ../../standalone/drakbackup:1 #, c-format msgid "Eject tape after the backup" msgstr "أخرج الشريط بعد النسخ الاحتياطي" #: ../../standalone/drakTermServ:1 #, c-format msgid "Etherboot Floppy/ISO" msgstr "Etherboot Floppy/ISO" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Modify printer configuration" msgstr "تعديل اعدادات الطابعة" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose a partition" msgstr "إختر تجزئة" #: ../../standalone/drakperm:1 #, c-format msgid "Edit current rule" msgstr "حرّر القاعدة الحالية" #: ../../standalone/drakbackup:1 #, c-format msgid "%s" msgstr "%s" #: ../../mouse.pm:1 #, c-format msgid "Please test the mouse" msgstr "من فضلك اختبر الفأرة" #: ../../fs.pm:1 #, c-format msgid "" "Do not update inode access times on this file system\n" "(e.g, for faster access on the news spool to speed up news servers)." msgstr "" #: ../../mouse.pm:1 #, fuzzy, c-format msgid "3 buttons with Wheel emulation" msgstr "محاكاة الأزرار" #: ../../standalone/drakperm:1 #, c-format msgid "Sticky-bit" msgstr "Sticky-bit" #: ../../standalone/drakbackup:1 #, c-format msgid "Other Media" msgstr "وسيط آخر" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan+" msgstr "Logitech MouseMan+" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup system files" msgstr "انسخ ملفات النظام" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Sector" msgstr "القطاع" #: ../../lang.pm:1 #, c-format msgid "Qatar" msgstr "قطر" #: ../../any.pm:1 #, c-format msgid "LDAP Base dn" msgstr "LDAP Base dn" #: ../../install_steps_gtk.pm:1 #, c-format msgid "" "You can't select this package as there is not enough space left to install it" msgstr "لا يمكنك اختيار هذه الحزمة لأنه لا يوجد مساحة كافية متبقية لتثبيتها" #: ../../help.pm:1 #, c-format msgid "generate auto-install floppy" msgstr "انشئ قرص تثبيت آلي" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Dialing mode" msgstr "وضعية الإتصال" #: ../../services.pm:1 #, c-format msgid "File sharing" msgstr "مشاركة الملفات" #: ../../any.pm:1 #, c-format msgid "Clean /tmp at each boot" msgstr "قم بتنظيف /tmp عند كل إقلاع" #: ../../lang.pm:1 #, c-format msgid "Malawi" msgstr "مالاوي" #: ../../standalone/drakTermServ:1 #, c-format msgid "local config: false" msgstr "local config: false" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "System settings" msgstr "اعدادات مخصصة" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Please choose your type of mouse." msgstr "فضلاً اختر نوع الفأرة." #: ../../services.pm:1 #, c-format msgid "running" msgstr "تعمل" #: ../../standalone/harddrake2:1 #, c-format msgid "class of hardware device" msgstr "فئة جهاز العتاد" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "These are the machines and networks on which the locally connected printer" "(s) should be available:" msgstr "" "هذه هي الماكينات و الشبكات التي يجب أن تكون الطابعات المحلية متوفرة لها:" #: ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "United Kingdom" msgstr "المملكة المتحدة" #: ../../lang.pm:1 #, c-format msgid "Indonesia" msgstr "اندونيسيا" #: ../../standalone/draksec:1 #, c-format msgid "default" msgstr "المرجع" #: ../../standalone/drakxtv:1 #, c-format msgid "France [SECAM]" msgstr "فرنسا [سيكام]" #: ../../any.pm:1 #, c-format msgid "restrict" msgstr "تشديد" #: ../../pkgs.pm:1 #, c-format msgid "must have" msgstr "يجب أن يكون لديك" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "CUPS does not support printers on Novell servers or printers sending the " "data into a free-formed command.\n" msgstr "" "CUPS لا يدعم الطابعات على أجهزة Novell الخادمة أو الطابعات التي ترسل " "البيانات الى أمر حر.\n" #: ../../lang.pm:1 #, c-format msgid "Senegal" msgstr "السنغال" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Command line" msgstr "سطر الأوامر" #: ../advertising/08-store.pl:1 #, c-format msgid "" "Our full range of Linux solutions, as well as special offers on products and " "other \"goodies\", are available on our e-store:" msgstr "" "خياراتنا الكثير من حلول نظام Linux بالإضافة الى العروض الخاصة و المنتجات " "الأخرىى متوفرة في متجرنا الألكتروني:" #: ../../standalone/drakbackup:1 #, c-format msgid "March" msgstr "مارس" #: ../../any.pm:1 #, c-format msgid "access to administrative files" msgstr "الوصول الى ملفات الإدارة" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Error during sendmail.\n" " Your report mail was not sent.\n" " Please configure sendmail" msgstr "" "خطأ أثناء ارسال البريد.\n" " لم يتم ارسال تقرير البريد.\n" " فضلاً قم بإعداد sendmail" #: ../../fs.pm:1 #, c-format msgid "" "Do not allow set-user-identifier or set-group-identifier\n" "bits to take effect. (This seems safe, but is in fact rather unsafe if you\n" "have suidperl(1) installed.)" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Montserrat" msgstr "مونتسيرات" #: ../../help.pm:1 #, c-format msgid "Automatic dependencies" msgstr "اعتمادات آلية" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Swap" msgstr "التبديل" #: ../../standalone/drakperm:1 #, c-format msgid "Custom settings" msgstr "اعدادات مخصصة" #: ../../../move/move.pm:1 #, c-format msgid "" "The USB key seems to have write protection enabled, but we can't safely\n" "unplug it now.\n" "\n" "\n" "Click the button to reboot the machine, unplug it, remove write protection,\n" "plug the key again, and launch Mandrake Move again." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Other" msgstr "استعد آخر" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "TV card" msgstr "بطاقة التلفاز" #: ../../printer/main.pm:1 #, c-format msgid "Printer on SMB/Windows 95/98/NT server" msgstr "طابعة على خادم SMB/Windows 95/98/NT" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "/_Configure CUPS" msgstr "تهيئة X" #: ../../standalone/scannerdrake:1 #, c-format msgid ", " msgstr ", " #: ../../standalone/drakbug:1 #, c-format msgid "Submit lspci" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remove selected host/network" msgstr "احذف المستضيف/الشبكة المختارة" #: ../../services.pm:1 #, c-format msgid "" "Postfix is a Mail Transport Agent, which is the program that moves mail from " "one machine to another." msgstr "" "Postfix هو عميل لنقل البريد, أي البرنامج الذي ينقل البريد من جهاز الى آخر." #: ../../keyboard.pm:1 #, c-format msgid "Uzbek (cyrillic)" msgstr "الأوزبكية (سيريلي)" #: ../../keyboard.pm:1 #, c-format msgid "" "Here you can choose the key or key combination that will \n" "allow switching between the different keyboard layouts\n" "(eg: latin and non latin)" msgstr "" "هنا يمكنك اختيار اختصارات لوحة المفاتيح التي \n" "ستسمح لك بالتبديل بين لغات لوحة المفاتيح المختلفة\n" "(مثلاً: لاتيني و غير لاتيني)" #: ../../network/network.pm:1 #, c-format msgid "Network Hotplugging" msgstr "Network Hotplugging" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, reports check result to tty." msgstr "if set to yes, reports check result to tty." #: ../../standalone/drakbackup:1 #, c-format msgid "Restore From CD" msgstr "استعادة من القرص المدمج" #: ../../standalone/drakgw:1 #, c-format msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use " "this computer's Internet connection.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" "أنت على وشك تهيئة جهازك لمشاركة الإتصال بالإنترنت.\n" "باستخدام هذه الميزة سيمكن للحواسيب الأخرى في الشبكة المحلية أن تستخدم وصلة " "الكمبيوتر لهذا الحاسوب.\n" "\n" "تأكد من أنك قمت بتهيئة وصلة الشبكة/الإنترنت باستخدام drakconnect قبل " "المتابعة.\n" "\n" "ملحوظة: تحتاج الى موائم للشبكة كي تقوم بإعداد الشبكة المحلية (LAN)." #: ../../network/ethernet.pm:1 #, c-format msgid "" "Please choose which network adapter you want to use to connect to Internet." msgstr "فضلاً اختر موائم الإنترنت الذي تريد استخدامه للإتصال بالإنترنت." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Photo memory card access on your HP multi-function device" msgstr "الوصول الى بطاقة الذاكرة على جهاز HP متعدد الوظائف" #: ../advertising/09-mdksecure.pl:1 #, c-format msgid "" "Enhance your computer performance with the help of a selection of partners " "offering professional solutions compatible with Mandrake Linux" msgstr "" "حسّن أداء أجهزتك بمساعدة اختياراتنا من الشركاء الذين يوفرون حلولاً احترافية " "متوافقة مع Mandrake Linux" #: ../../standalone/printerdrake:1 #, c-format msgid "Authors: " msgstr "المؤلفون: " #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing is now disabled." msgstr "مشاركة اتصال الإنترنت غير ممكَّنة الآن." #: ../../security/help.pm:1 #, c-format msgid "if set to yes, verify checksum of the suid/sgid files." msgstr "if set to yes, verify checksum of the suid/sgid files." #: ../../keyboard.pm:1 #, c-format msgid "Latin American" msgstr "الأمريكية اللاتينية" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Japanese text printing mode" msgstr "وضعية طبع النصوص اليابانية" #: ../../standalone/harddrake2:1 #, c-format msgid "Old device file" msgstr "ملف الجهاز القديم" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Info: " msgstr "معلومات: " #: ../../interactive/stdio.pm:1 #, c-format msgid "Button `%s': %s" msgstr "Button `%s': %s" #: ../../any.pm:1 ../../interactive.pm:1 ../../harddrake/sound.pm:1 #: ../../standalone/drakbug:1 ../../standalone/drakconnect:1 #: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1 #: ../../standalone/service_harddrake:1 #, c-format msgid "Please wait" msgstr "من فضلك انتظر" #: ../../mouse.pm:1 #, c-format msgid "Genius NetMouse" msgstr "Genius NetMouse" #: ../../printer/printerdrake.pm:1 #, c-format msgid "None" msgstr "ولا شئ" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The entered IP is not correct.\n" msgstr "عنوان IP المدُخل غير صحيح.\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Please be sure that the cron daemon is included in your services." msgstr "تأكد من أن مراقب cron موجود ضمن خدمات النظام." #: ../../standalone/drakconnect:1 #, c-format msgid "Ethernet Card" msgstr "Ethernet Card" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Delete selected printer" msgstr "احذف القاعدة المختارة" #: ../../services.pm:1 ../../ugtk2.pm:1 #, c-format msgid "Info" msgstr "المعلومات" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 #: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Install" msgstr "ثبّت" #: ../../help.pm:1 #, c-format msgid "" "Click on \"%s\" if you want to delete all data and partitions present on\n" "this hard drive. Be careful, after clicking on \"%s\", you will not be able\n" "to recover any data and partitions present on this hard drive, including\n" "any Windows data.\n" "\n" "Click on \"%s\" to stop this operation without losing any data and\n" "partitions present on this hard drive." msgstr "" "اضغط \"%s\" اذا كنت تريد حذف كل التجزئات الموجودة على القرص\n" "الصلب. خذ حذرك, بعد نقرك لزر \"%s\" لن تتمكن من استعادة\n" "أي بيانات أو تجزئات كانت موجودة على هذا القرص الصلب.\n" "بما فيها بيانات Windows\n" "انقر \"%s\" لإيقاف هذه العملية دون خسارة أي بيانات أو تجزئات\n" "موجودة على القرص الصلب." #: ../../steps.pm:1 #, c-format msgid "Exit install" msgstr "الخروج من التثبيت" #: ../../../move/move.pm:1 #, c-format msgid "Need a key to save your data" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local " "Area Network, using automatic network configuration (DHCP)." msgstr "" "تم إعداد كل شئ.\n" "يمكنك الآن مشاركة اتصال الإنترنت مع الأجهزة الأخرى في شبكتك المحلية باستخدام " "إعداد الشبكة الأوتوماتيكي (DHCP)." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Remote CUPS server" msgstr "خادم CUPS بعيد" #: ../../mouse.pm:1 #, c-format msgid "Sun - Mouse" msgstr "Sun - Mouse" #: ../../standalone/drakgw:1 #, c-format msgid "" "There is only one configured network adapter on your system:\n" "\n" "%s\n" "\n" "I am about to setup your Local Area Network with that adapter." msgstr "" "يوجد موائم شبكة واحد فقط معدّ على نظامك:\n" "\n" "%s\n" "\n" "نحن على وشك اعداد الشبكة المحلية باستخدام هذا الموائم." #: ../../standalone/drakbug:1 #, c-format msgid "Submit cpuinfo" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Minimal install" msgstr "تثبيت مصغّر" #: ../../lang.pm:1 #, c-format msgid "Ethiopia" msgstr "اثيوبيا" #: ../../standalone/drakbackup:1 #, c-format msgid "YES" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Enable \"crontab\" and \"at\" for users" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Devanagari" msgstr "ديفانغاري" #: ../../standalone/harddrake2:1 #, c-format msgid "" "- pci devices: this gives the PCI slot, device and function of this card\n" "- eide devices: the device is either a slave or a master device\n" "- scsi devices: the scsi bus and the scsi device ids" msgstr "" "- أجهزة pci: تعطي منفذ PCI, الجهاز و وظيفة هذه البطاقة\n" "- أجهزة eide: الجهاز إما أن يكون جهاز slave أو master\n" "- أجهزة scsi: scsi bus و هوية جهاز scsi" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Total size: %d / %d MB" msgstr "الحجم الإجمالي: %d / %d ميغابايت" #: ../../install_steps_interactive.pm:1 #, c-format msgid "disabled" msgstr "معطل" #: ../../standalone/scannerdrake:1 #, c-format msgid "Search for new scanners" msgstr "البحث عن ماسحات ضوئية جديدة..." #: ../../standalone/drakgw:1 #, c-format msgid "Disabling servers..." msgstr "جاري تعطيل الخوادم..." #: ../../standalone/drakboot:1 #, c-format msgid "Installation of %s failed. The following error occured:" msgstr "فشل تثبيت %s. ظهر الخطأ التالي:" #: ../../standalone/drakboot:1 #, c-format msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s." msgstr "تعذر تشغيل mkinitrd -f /boot/initrd-%s.img %s." #: ../../install_any.pm:1 #, c-format msgid "" "You have selected the following server(s): %s\n" "\n" "\n" "These servers are activated by default. They don't have any known security\n" "issues, but some new ones could be found. In that case, you must make sure\n" "to upgrade as soon as possible.\n" "\n" "\n" "Do you really want to install these servers?\n" msgstr "" "لقد اخترت الخادمات التالية: %s\n" "\n" "\n" "هذه الخادمات مفعّلة افتراضياً, و لا يوجد لهم مشاكل أمنية\n" "معروفة, و لكن قد تكتشف بعض المشاكل الجديدة. في هذه الحالة, تأكد من أن\n" "تقوم بالترقية في أقرب وقت ممكن.\n" "\n" "\n" "هل أنت متأكد أنك تريد تثبيت هذه الخادمات الآن؟\n" #: ../../printer/main.pm:1 #, c-format msgid "Network printer (TCP/Socket)" msgstr "طابعة شبكة (TCP/Socket)" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup User files..." msgstr "انسخ ملفات المستخدمين..." #: ../../steps.pm:1 #, c-format msgid "Install system" msgstr "تثبيت النظام" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "First DNS Server (optional)" msgstr "خادم DNS الأول (اختياري)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Alternatively, you can specify a device name/file name in the input line" msgstr "بدلاً من ذلك, يمكنك تحديد اسم جهاز/اسم ملف في حقا الإدخال" #: ../../security/help.pm:1 #, c-format msgid "" "If SERVER_LEVEL (or SECURE_LEVEL if absent)\n" "is greater than 3 in /etc/security/msec/security.conf, creates the\n" "symlink /etc/security/msec/server to point to\n" "/etc/security/msec/server..\n" "\n" "The /etc/security/msec/server is used by chkconfig --add to decide to\n" "add a service if it is present in the file during the installation of\n" "packages." msgstr "" "اذا كان SERVER_LEVEL (أو SECURE_LEVEL في حال عدم وجود الأول)\n" "أكبر من 3 في /etc/security/msec/security.conf, و ينشئ\n" "الاختصار /etc/security/msec/server لتشير\n" "الى /etc/security/msec/sever..\n" "\n" "ملف /etc/security/msec/server يتم استخدامه عن طريق أمر chkconfig --add " "لتقرير اضافة خدمة اذا كانت موجودة في في الملف أثناء تثبيت\n" "الحزم." #: ../../keyboard.pm:1 #, c-format msgid "Russian (Phonetic)" msgstr "الرّوسية (صوتية)" #: ../../standalone/drakTermServ:1 #, c-format msgid "dhcpd Config..." msgstr "تهيئة dhcpd..." #: ../../any.pm:1 #, c-format msgid "LILO/grub Installation" msgstr "تثبيت LILO/grub" #: ../../keyboard.pm:1 #, c-format msgid "Israeli" msgstr "العبرية" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer \"%s\" on server \"%s\"" msgstr "الطابعة \"%s\" على الخادم \"%s\"" #: ../../standalone/drakTermServ:1 #, c-format msgid "Floppy can be removed now" msgstr "يمكن ازالة القرص المرن الآن" #: ../../help.pm:1 #, c-format msgid "Truly minimal install" msgstr "تثبيت مصغّر جداً" #: ../../lang.pm:1 #, c-format msgid "Denmark" msgstr "الدنمارك" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Moving partition..." msgstr "جاري نقل التجزئة..." #: ../../standalone/drakgw:1 #, c-format msgid "(This) DHCP Server IP" msgstr "عنوان IP لخادم DHCP (هذا)" #: ../../Xconfig/test.pm:1 #, c-format msgid "Test of the configuration" msgstr "اختبار الإعداد" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing %s ..." msgstr "جاري تثبيت %s ..." #: ../../help.pm:1 #, c-format msgid "" "If you told the installer that you wanted to individually select packages,\n" "it will present a tree containing all packages classified by groups and\n" "subgroups. While browsing the tree, you can select entire groups,\n" "subgroups, or individual packages.\n" "\n" "Whenever you select a package on the tree, a description appears on the\n" "right to let you know the purpose of the package.\n" "\n" "!! If a server package has been selected, either because you specifically\n" "chose the individual package or because it was part of a group of packages,\n" "you will be asked to confirm that you really want those servers to be\n" "installed. By default Mandrake Linux will automatically start any installed\n" "services at boot time. Even if they are safe and have no known issues at\n" "the time the distribution was shipped, it is entirely possible that that\n" "security holes were discovered after this version of Mandrake Linux was\n" "finalized. If you do not know what a particular service is supposed to do\n" "or why it is being installed, then click \"%s\". Clicking \"%s\" will\n" "install the listed services and they will be started automatically by\n" "default during boot. !!\n" "\n" "The \"%s\" option is used to disable the warning dialog which appears\n" "whenever the installer automatically selects a package to resolve a\n" "dependency issue. Some packages have relationships between each other such\n" "that installation of a package requires that some other program is also\n" "rerquired to be installed. The installer can determine which packages are\n" "required to satisfy a dependency to successfully complete the installation.\n" "\n" "The tiny floppy disk icon at the bottom of the list allows you to load a\n" "package list created during a previous installation. This is useful if you\n" "have a number of machines that you wish to configure identically. Clicking\n" "on this icon will ask you to insert a floppy disk previously created at the\n" "end of another installation. See the second tip of last step on how to\n" "create such a floppy." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose your filesystem encryption key" msgstr "اختر مفتاح تشفير نظام الملفات" #: ../../lang.pm:1 #, c-format msgid "Sierra Leone" msgstr "سيراليون" #: ../../lang.pm:1 #, c-format msgid "Botswana" msgstr "بوتسوانا" #: ../../lang.pm:1 #, c-format msgid "Andorra" msgstr "أندورا" #: ../../standalone/draksec:1 #, c-format msgid "(default value: %s)" msgstr "(القيمة الإفتراضية: %s)" #: ../../security/help.pm:1 #, fuzzy, c-format msgid "Set password aging to \"max\" days and delay to change to \"inactive\"." msgstr "" "Arguments: (max, inactive=-1)\n" "\n" "Set password aging to \\fImax\\fP days and delay to change to \\fIinactive" "\\fP." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Alternative test page (Letter)" msgstr "صفحة اختبارية بديلة (Letter)" #: ../../standalone/drakgw:1 #, c-format msgid "" "DHCP Server Configuration.\n" "\n" "Here you can select different options for the DHCP server configuration.\n" "If you don't know the meaning of an option, simply leave it as it is.\n" "\n" msgstr "" "تهيئة خادم DHCP.\n" "\n" "هنا يمكنك اختيار خيارات مختلفة لتهيئة خادم DHCP.\n" "اذا لم تكن نهلم ماذا يعني الخيار فكل ما عليك هو تركه كما هو.\n" "\n" #: ../../Xconfig/card.pm:1 #, c-format msgid "Choose an X server" msgstr "إختر خادم X" #: ../../../move/tree/mdk_totem:1 #, c-format msgid "Copying to memory to allow removing the CDROM" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "Swap partition size in MB: " msgstr "حجم تجزئة التبديل بالميغابايت" #: ../../standalone/drakbackup:1 #, c-format msgid "No changes to backup!" msgstr "لا تغييران للنسخة الإحتياطية!" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Formatted\n" msgstr "مجهز\n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Type of install" msgstr "نوع التثبيت" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer \"%s\" on SMB/Windows server \"%s\"" msgstr "الطابعة \"%s\" على خادم SMB/Windows \"%s\"" #: ../../modules/parameters.pm:1 #, c-format msgid "%d comma separated numbers" msgstr "%d أرقام مفصولة بالفاصلة" #: ../../services.pm:1 #, c-format msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" "بروتوكول rusers يسمح للمستخدمين على الشبكة أن يتعرفوا على من\n" "سجل الدخول الى الأجهزة المستجيبة الأخرى." #: ../../standalone/drakautoinst:1 #, c-format msgid "Automatic Steps Configuration" msgstr "تهيئة آلية للخطوات" #: ../../lang.pm:1 #, c-format msgid "Barbados" msgstr "باربادوس" #: ../advertising/02-community.pl:1 #, c-format msgid "" "Want to know more and to contribute to the Open Source community? Get " "involved in the Free Software world!" msgstr "" "هل تريد معرفة المزيد عن مجتمع المصادر المفتوحة؟ كن جزءاً من عالم البرمجيات " "الحرة" #: ../../standalone/drakbackup:1 #, c-format msgid "Please select data to backup..." msgstr "رجاء اختر البيانات المطلوب نسخها احتياطيا..." #: ../../standalone/net_monitor:1 #, c-format msgid "" "Connection failed.\n" "Verify your configuration in the Mandrake Control Center." msgstr "" "فشل الإتصال.\n" "تأكد من الوصلة في مركز تحكم Mandrake." #: ../../standalone/net_monitor:1 #, c-format msgid "received" msgstr "مُستقبلة" #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "Enable su only from the wheel group members or for any user" msgstr "" "Arguments: (arg)\n" "\n" " Enabling su only from members of the wheel group or allow su from any user." #: ../../standalone/logdrake:1 #, c-format msgid "/File/_New" msgstr "/ملف/_جديد" #: ../../standalone/drakgw:1 #, c-format msgid "The DNS Server IP" msgstr "عنوان IP لخادم DNS" #: ../../standalone/drakTermServ:1 #, c-format msgid "IP Range End:" msgstr "IP Range End:" #: ../../security/level.pm:1 #, c-format msgid "High" msgstr "مرتفع" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Add a new printer to the system" msgstr "اضافة مستخدم الى النظام" #: ../../any.pm:1 #, c-format msgid "NoVideo" msgstr "لا فيديو" #: ../../standalone/harddrake2:1 #, c-format msgid "this field describes the device" msgstr "هذا الحقل يصف الجهاز" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Adding printer to Star Office/OpenOffice.org/GIMP" msgstr "جاري اضافة الطابعة الى Star Office/OpenOffice.org/GIMP" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Local Printers" msgstr "الطابعات المحلية" #: ../../standalone/drakpxe:1 #, c-format msgid "Installation image directory" msgstr "دليل صورة التثبيت" #: ../../any.pm:1 #, c-format msgid "NIS Server" msgstr "خادم NIS" #: ../../standalone/scannerdrake:1 #, c-format msgid "Port: %s" msgstr "المنفذ: %s" #: ../../lang.pm:1 #, c-format msgid "Spain" msgstr "أسبانيا" #: ../../standalone/drakTermServ:1 #, c-format msgid "local config: %s" msgstr "" #: ../../any.pm:1 #, c-format msgid "This user name has already been added" msgstr "اسم المستخدم مُضاف مسبقا" #: ../../interactive.pm:1 #, c-format msgid "Choose a file" msgstr "إختر ملف" #: ../../standalone/drakconnect:1 #, c-format msgid "Apply" msgstr "تطبيق" #: ../../standalone/scannerdrake:1 #, c-format msgid "Auto-detect available ports" msgstr "تحقق آلياً من المنافذ المتوفرة" #: ../../lang.pm:1 #, c-format msgid "San Marino" msgstr "سان مارينو" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing currently disabled" msgstr "مشاركة الإتصال بالإنترنت" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "Belgium" msgstr "بلجيكا" #: ../../lang.pm:1 #, c-format msgid "Kuwait" msgstr "الكويت" #: ../../any.pm:1 #, c-format msgid "Choose the window manager to run:" msgstr "اختر مدير النوافذ الذي سيتم تشغيله:" #: ../../standalone/drakbackup:1 #, c-format msgid "December" msgstr "ديسمبر" #: ../../standalone/harddrake2:1 #, c-format msgid "sub generation of the cpu" msgstr "الجيل الثانوي للمعالج" #: ../../standalone/drakbug:1 #, c-format msgid "First Time Wizard" msgstr "معالج First Time" #: ../../lang.pm:1 #, c-format msgid "Taiwan" msgstr "تايوان" #: ../../lang.pm:1 #, c-format msgid "Pakistan" msgstr "باكستان" #: ../../standalone/logdrake:1 #, c-format msgid "please wait, parsing file: %s" msgstr "يرجى الإنتظار, جاري تحليل الملف: %s" #: ../../install_steps.pm:1 ../../../move/move.pm:1 #, c-format msgid "" "An error occurred, but I don't know how to handle it nicely.\n" "Continue at your own risk." msgstr "" "ظهر خطأ و لا أعرف كيف أتعامل معه بأسلوب جيد.\n" "تابع على مسؤوليتك." #: ../../install_steps_gtk.pm:1 #, c-format msgid "Importance: " msgstr "الأهمية:" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To be able to print with your Lexmark inkjet and this configuration, you " "need the inkjet printer drivers provided by Lexmark (http://www.lexmark." "com/). Click on the \"Drivers\" link. Then choose your model and afterwards " "\"Linux\" as operating system. The drivers come as RPM packages or shell " "scripts with interactive graphical installation. You do not need to do this " "configuration by the graphical frontends. Cancel directly after the license " "agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and " "adjust the head alignment settings with this program." msgstr "" "To be able to print with your Lexmark inkjet and this configuration, you " "need the inkjet printer drivers provided by Lexmark (http://www.lexmark." "com/). Click on the \"Drivers\" link. Then choose your model and afterwards " "\"Linux\" as operating system. The drivers come as RPM packages or shell " "scripts with interactive graphical installation. You do not need to do this " "configuration by the graphical frontends. Cancel directly after the license " "agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and " "adjust the head alignment settings with this program." #: ../../standalone/drakperm:1 #, c-format msgid "Permissions" msgstr "التصاريح" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider name (ex provider.net)" msgstr "اسم الموفر (مثلاً provider.net)" #: ../../install_steps_gtk.pm:1 #, c-format msgid "" "Your system is low on resources. You may have some problem installing\n" "Mandrake Linux. If that occurs, you can try a text install instead. For " "this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" "النظام لديك قليل الموارد. قد تقابل بعض المشاكل قي تثبيت\n" "Mandrake Linux. اذا حدث ذلك, يمكنك التثبيت في وضع نصي, لهذا الغرض,\n" "اضغط `F1' عند الإقلاع من القرص المدمج, و اكتب `text'." #: ../../install_interactive.pm:1 #, c-format msgid "Use the Windows partition for loopback" msgstr "استخدم تجزئة Windows كـ loopback" #: ../../keyboard.pm:1 #, c-format msgid "Armenian (typewriter)" msgstr "الأرمينية (آلة كاتبة)" #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Connection type: " msgstr "نوع العلاقة" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Graphical interface" msgstr "الواجهة الرسومية" #: ../../lang.pm:1 #, c-format msgid "Chad" msgstr "تشاد" #: ../../lang.pm:1 #, c-format msgid "India" msgstr "الهند" #: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1 #, c-format msgid "XFree %s with 3D hardware acceleration" msgstr "XFree %s مع تسريع ثلاثي الأبعاد" #: ../../lang.pm:1 #, c-format msgid "Slovakia" msgstr "سلوفاكيا" #: ../../lang.pm:1 #, c-format msgid "Singapore" msgstr "سنغافورة" #: ../../lang.pm:1 #, c-format msgid "Cambodia" msgstr "كمبوديا" #: ../../Xconfig/various.pm:1 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "تزامن الشاشة الأفقي: %s\n" #: ../../standalone/drakperm:1 #, c-format msgid "Path" msgstr "المسار" #: ../../standalone/drakbug:1 #, c-format msgid "NOT FOUND" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Here you can specify any arbitrary command line into which the job should be " "piped instead of being sent directly to a printer." msgstr "" "هنا يمكنك تحديد أي أمر هلامي يمكن تحويل وظيفة الطباعة اليه بدلاً من ارسالها " "مباشرةً الى الطابعة." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printing system (%s) will not be started automatically when the machine " "is booted.\n" "\n" "It is possible that the automatic starting was turned off by changing to a " "higher security level, because the printing system is a potential point for " "attacks.\n" "\n" "Do you want to have the automatic starting of the printing system turned on " "again?" msgstr "" "نظام الطباعة (%s) لن يتم بدؤه بشكل آلي عند بدء تشغيل الماكينة.\n" "\n" "من الممكن أن يكون قد تم تعطيل البدء الآلي بسبب التغيير الى مستوى أعلى لأن " "نظام الطباعة قد يكون نقطة مبدئية لهجمات المخترقين.\n" "\n" "هل تريد تمكين البدء الآلي لنظام الطباعة عند بدء التشغيل مرة أخرى؟" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Printer %s\n" "What do you want to modify on this printer?" msgstr "" "الطابعة %s\n" "هل تريد تعديل تلك الطابعة؟" #: ../../standalone/scannerdrake:1 #, c-format msgid "Add host" msgstr "اضف مستضيف" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "If you really think that you know which driver is the right one for your " "card\n" "you can pick one in the above list.\n" "\n" "The current driver for your \"%s\" sound card is \"%s\" " msgstr "" "اذا كنت تعتقد فعلاً أنك تعرف ما هو المشغل الصحيح لبطاقتك\n" "يمكنك اختياره من القائمة أعلاه.\n" "\n" "المشغل الحالي لبطاقة الصوت \"%s\" الخاصة بك هو \"%s\" " #: ../../any.pm:1 #, c-format msgid "" "Would you like to allow users to share some of their directories?\n" "Allowing this will permit users to simply click on \"Share\" in konqueror " "and nautilus.\n" "\n" "\"Custom\" permit a per-user granularity.\n" msgstr "" "هل تريد السماح للمستخدمين بمشاركة بعض الأدلة الخاصة بهم؟\n" "السماح بذلك سيسمح للمستخدمين بأن ينقروا زر المشاركة في كونكيورر و نوتيلوس.\n" "\n" "\"مخصص\" يسمح لك بعمل اعدادات خاص لكل مستخدم.\n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Please choose load or save package selection on floppy.\n" "The format is the same as auto_install generated floppies." msgstr "" "فضلاُ اختر حفظ أو تحميل اختياراتك للحزم من القرص المرن.\n" "النسق مشابه لأقراص التثبيت الآلي المرنة." #: ../../../move/tree/mdk_totem:1 #, fuzzy, c-format msgid "No CDROM support" msgstr "دعم الراديو:" #: ../../standalone/drakxtv:1 #, c-format msgid "China (broadcast)" msgstr "الصين (broadcast)" #: ../../standalone/drakbackup:1 #, c-format msgid "Use quota for backup files." msgstr "استخدم quota لملفات النسخ الإحتياطي." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Configuring printer \"%s\"..." msgstr "جاري إعداد الطابعة \"%s\" ..." #: ../../fs.pm:1 #, c-format msgid "" "Do not allow execution of any binaries on the mounted\n" "file system. This option might be useful for a server that has file systems\n" "containing binaries for architectures other than its own." msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "Internet connection" msgstr "وصلة انترنت" #: ../../modules/interactive.pm:1 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "فشل تحميل الوحدة %s.\n" "هل تريد المحاولة ثانية بمعاملات أخرى؟" #: ../advertising/01-thanks.pl:1 #, c-format msgid "Welcome to the Open Source world." msgstr "أهلاً بك في عالم المصادر المفتوحة" #: ../../lang.pm:1 #, c-format msgid "Bosnia and Herzegovina" msgstr "البوسنة و الهرسك" #: ../../fsedit.pm:1 #, c-format msgid "" "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " "point\n" msgstr "" "تحتاج الى نظام ملفات حقيقي (ext2/ext3, resierfs, xfs, أو jfs) لنقطة التحميل " "هذه\n" #: ../../standalone/scannerdrake:1 #, c-format msgid "You must enter a host name or an IP address.\n" msgstr "فضلا أدخل اسم المستضيف أو عنوان IP.\n" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "Netherlands" msgstr "هولندا" #: ../../standalone/drakbackup:1 #, c-format msgid "Sending files by FTP" msgstr "جاري ارسال الملفات عن طريق FTP" #: ../../network/isdn.pm:1 #, c-format msgid "Internal ISDN card" msgstr "بطاقة ISDN داخلية" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "There's no known OSS/ALSA alternative driver for your sound card (%s) which " "currently uses \"%s\"" msgstr "لا يوجد مشغل بديل (ALSA أو OSS) لبطاقة الصوت (%s) التي تستخدم \"%s\"" #: ../../network/modem.pm:1 #, c-format msgid "Title" msgstr "العنوان" #: ../../standalone/drakfont:1 #, c-format msgid "Install & convert Fonts" msgstr "ثبّت و حوّل الخطوط" #: ../../standalone/drakbackup:1 #, c-format msgid "WARNING" msgstr "WARNING" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Installing bootloader" msgstr "جاري تثبين محمّل الإقلاع" #: ../../standalone/drakautoinst:1 #, c-format msgid "replay" msgstr "اعادة" #: ../../network/netconnect.pm:1 #, c-format msgid "detected %s" msgstr "تم اكتساف %s" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Expect is an extension to the Tcl scripting language that allows interactive " "sessions without user intervention." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Virgin Islands (U.S.)" msgstr "الجزر العذراء (الولايات المتحدة)" #: ../../partition_table.pm:1 #, c-format msgid "Bad backup file" msgstr "ملف نسخ احتياطي سيئ" #: ../../standalone/drakgw:1 #, c-format msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" "تم تنصيب مشاركة الإتصال بالإنترنت مسبقاً.\n" "و هي معطلة حالياً.\n" "\n" "ماذا تريد أن تفعل؟" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Enter IP address and port of the host whose printers you want to use." msgstr "أدخل عنوان IP و منفذ المستضيف الذي تريد استخدام طابعاته." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Pipe into command" msgstr "حول الى الأمر" #: ../../install_interactive.pm:1 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" "بعض العتاد الموجود على جهازك يحتاج الى مشغلات ``تجارية'' كي تعمل.\n" "يمكنك ايجاد مزيد من المعلومات عنها في: %s" #: ../../lang.pm:1 #, c-format msgid "Haiti" msgstr "هايتي" #: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Detecting devices..." msgstr "جاري التحقق من الأجهزة..." #: ../../standalone/drakbackup:1 #, c-format msgid "" "Custom allows you to specify your own day and time. The other options use " "run-parts in /etc/crontab." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Description of the fields:\n" "\n" msgstr "" "وصف الحقول:\n" "\n" #: ../../standalone/draksec:1 #, c-format msgid "Basic options" msgstr "الخيارات الأساسية" #: ../../standalone/harddrake2:1 #, c-format msgid "the name of the CPU" msgstr "اسم المعالج" #: ../../security/l10n.pm:1 #, c-format msgid "Accept bogus IPv4 error messages" msgstr "اقبل رسائل خطأ IPv4 الوهمية" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Refreshing printer data..." msgstr "جاري اعادة تحميل بيانات الطابة..." #: ../../install2.pm:1 #, c-format msgid "You must also format %s" msgstr "عليك أيضا تجهيز %s" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Be careful: this operation is dangerous." msgstr "كن حذرا: هذه العملية خطيرة" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Insert a floppy containing package selection" msgstr "أدخهل القرص المرن المحتوى على اختيارات الحزم" #: ../../diskdrake/dav.pm:1 #, c-format msgid "Server: " msgstr "الخادم: " #: ../../standalone/draksec:1 #, c-format msgid "Security Alerts:" msgstr "تنبيهات أمنية:" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Sweden" msgstr "السويد" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Expect for SSH" msgstr "استخدم Expect لـSSH" #: ../../lang.pm:1 #, c-format msgid "Poland" msgstr "بولندا" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Other ports" msgstr "منافذ أخرى" #: ../../harddrake/v4l.pm:1 #, c-format msgid "number of capture buffers for mmap'ed capture" msgstr "number of capture buffers for mmap'ed capture" #: ../../network/adsl.pm:1 #, fuzzy, c-format msgid " - detected" msgstr "تم اكتشافه" #: ../../harddrake/data.pm:1 #, c-format msgid "SMBus controllers" msgstr "متحكمات SMBus" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Connection timeout (in sec)" msgstr "الوقت الأقصى للاتصال (بالثواني)" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Some of the early i486DX-100 chips cannot reliably return to operating mode " "after the \"halt\" instruction is used" msgstr "" "Some of the early i486DX-100 chips cannot reliably return to operating mode " "after the \"halt\" instruction is used" #: ../../keyboard.pm:1 #, c-format msgid "Croatian" msgstr "الكرواتية" #: ../../help.pm:1 #, c-format msgid "Use existing partition" msgstr "استخدم التجزئات الموجودة" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Unable to contact mirror %s" msgstr "تعذر الإتصال بالمرآة %s" #: ../../standalone/logdrake:1 #, c-format msgid "/Help/_About..." msgstr "/مساعدة/_حول البرنامج..." #: ../../standalone/drakbackup:1 #, c-format msgid "Remove user directories before restore." msgstr "احذف أدلة المستخدمين قبل الإستعادة" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are going to configure a remote printer. This needs working network " "access, but your network is not configured yet. If you go on without network " "configuration, you will not be able to use the printer which you are " "configuring now. How do you want to proceed?" msgstr "" "أنت على وشك تهيئة طابعة بعيدة. هذا يحتاج الى أن تكون وصلة الشبكة تعمل و لكن " "الشبكة لم يتم اعدادها حتى الآن. اذا كنت تريد المتابعة دون تهيئة الشبكة, " "ستكون قادراً على استخدام الطابعة التي تقةم بتهيئتها الآن. كيف تريد المتابعة؟" #: ../../printer/printerdrake.pm:1 #, c-format msgid "CUPS printer configuration" msgstr "إعدادات طابعات CUPS" #: ../../standalone/drakfont:1 #, c-format msgid "could not find any font in your mounted partitions" msgstr "لم أتمكن من ايجاد أي خطوط في تجزئاتك المحملة" #: ../../standalone/harddrake2:1 #, c-format msgid "F00f bug" msgstr "F00f bug" #: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1 #, c-format msgid "XFree %s" msgstr "XFree %s" #: ../../standalone/drakTermServ:1 #, c-format msgid "Domain Name:" msgstr "اسم النطاق:" #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "Root umask" msgstr "كلمة مرور المستخدم الجذر" #: ../../any.pm:1 #, c-format msgid "On Floppy" msgstr "على قرص مرن" #: ../../security/l10n.pm:1 #, c-format msgid "Reboot by the console user" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore" msgstr "استعادة" #: ../../standalone/drakclock:1 #, fuzzy, c-format msgid "Server:" msgstr "الخادم: " #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check if the network devices are in promiscuous mode." msgstr "if set to yes, check if the network devices are in promiscuous mode." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Looking for available packages..." msgstr "جاري العثور على الحزم المتوفرة..." #: ../../../move/move.pm:1 #, fuzzy, c-format msgid "Please wait, setting up system configuration files on USB key..." msgstr "انتظر من فضلك, جاري تعيين مستوى الأمن.." #: ../../any.pm:1 #, c-format msgid "Init Message" msgstr "رسالة Init" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Rescue partition table" msgstr "إنقاذ جدول التقسيم" #: ../../lang.pm:1 #, c-format msgid "Cyprus" msgstr "قبرص" #: ../../standalone/net_monitor:1 #, c-format msgid "Connection complete." msgstr "تم الإتصال." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Remove from RAID" msgstr "ازالة من RAID" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "مفتاح التشفير هذا بسيط جدا (يجب أن يكون %d حرفا على الأقل)" #: ../../standalone/drakbug:1 #, c-format msgid "Configuration Wizards" msgstr "معالجات التهيئة" #: ../../network/netconnect.pm:1 #, c-format msgid "ISDN connection" msgstr "وصلة ISDN" #: ../../standalone/drakbackup:1 #, c-format msgid "CD-R / DVD-R" msgstr "CDROM / DVDROM" #: ../../standalone/harddrake2:1 #, c-format msgid "primary" msgstr "أساسي" #: ../../printer/main.pm:1 #, c-format msgid " on SMB/Windows server \"%s\", share \"%s\"" msgstr "على خادم SMB/Windows \"%s\", المشاركة \"%s\"" #: ../../help.pm:1 #, c-format msgid "" "This dialog is used to choose which services you wish to start at boot\n" "time.\n" "\n" "DrakX will list all the services available on the current installation.\n" "Review each one carefully and uncheck those which are not needed at boot\n" "time.\n" "\n" "A short explanatory text will be displayed about a service when it is\n" "selected. However, if you are not sure whether a service is useful or not,\n" "it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you will probably not want to start any services that you do not\n" "need. Please remember that several services can be dangerous if they are\n" "enabled on a server. In general, select only the services you really need.\n" "!!" msgstr "" "هذه الخطوة هي لاختيار الخدمات التي سيتم تشغيلها عند بدء التشغيل.\n" "\n" "سيقوم DrakX بعرض قائمة بكل الخدمات المتوفرة في هذا التثبيت.\n" "راجع كل خدمة بتمعن و قم بإزالة التأشير من تلك الخدمات التي لا تحتاجها\n" "بشكل دائم عند الإقلاع.\n" "\n" "سيتم عرض شرح قصير حول الخدمة عند\n" "اختيارها. عموماً, اذا لم تكن متأكد ما اذا كانت الخدمة مفيدة أم لا,\n" "فمن الأفضل ترك الخيار الإفتراضي.\n" "\n" "!! في هذه المرحلة كن حذراُ اذا كنت تريد استخدام ماكينتك\n" "كخادم: ربما لن تريد بدء أي خدمات لا تحتاجها.\n" "فضلاً تذكر أن العديد من الخدمات قد تكون خطرة اذا كانت\n" "متاحة على الخادم. بشكل عام اختر فقط الخدمات التي تحتاجها.\n" "!!" #: ../../lang.pm:1 #, c-format msgid "Niue" msgstr "نيوي" #: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Skip" msgstr "تخطي" #: ../../services.pm:1 #, c-format msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" "تنشط/تخمد كل واجهات الشبكة المهيئة كي تبدأ\n" "عند بدء الإقلاع." #: ../../standalone/harddrake2:1 #, c-format msgid "" "the CPU frequency in MHz (Megahertz which in first approximation may be " "coarsely assimilated to number of instructions the cpu is able to execute " "per second)" msgstr "" "تردد المعالج بالميغاهيرتز (الميغاهيرتز تشير الى العدد التقريبي من التعليمات " "التي يستطيع المعالج تنفيذها في الثانية الواحدة)" #: ../../pkgs.pm:1 #, c-format msgid "important" msgstr "مهم" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Mandrake Linux Printer Management Tool" msgstr "أداة Mandrake Linux لإدارة المستخدمين" #: ../../standalone/drakbackup:1 #, c-format msgid "Total Progress" msgstr "اجمالي التقدم" #: ../../help.pm:1 #, c-format msgid "" "DrakX will first detect any IDE devices present in your computer. It will\n" "also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection is not foolproof, DrakX may fail in detecting\n" "your hard drives. If so, you'll have to specify your hardware by hand.\n" "\n" "If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n" "want to configure options for it. You should allow DrakX to probe the\n" "hardware for the card-specific options which are needed to initialize the\n" "adapter. Most of the time, DrakX will get through this step without any\n" "issues.\n" "\n" "If DrakX is not able to probe for the options to automatically determine\n" "which parameters need to be passed to the hardware, you'll need to manually\n" "configure the driver." msgstr "" "سيقوم DrakX أولاً بالتحقق من أي أجهزة IDE مرتبطة بالكمبيوتر. سيقوم\n" "أيضا بالتحقق من وجود بطاقات PCI SCSI على نظامك. اذا تم ايجاد\n" "بطاقة SCSI, سيقوم DrakX تلقائياً بتثبيت المشغل المناسب.\n" "\n" "لأن التحقق الآلي من العتاد غير خالي من الأخطاء, قد يتعذر\n" "على DrakX التحقق من أقراصك الصلبة. لذا سيكون عليك تحديد عتادك يدوياً.\n" "\n" "اذا اضطررت الى تحديد موائم PCI SCSI يدوياً, سيسألك DrakX عمّا اذا\n" "كنت تريد تهيئة الخيارات الخاصة به. يجب أن تسمح لـ DrakX بأن\n" "يقوم بالتحقق الآلي من العتاد لكي يحدد الخيارات الخاصة بالبطاقة\n" "و التي يحتاج اليها لتشغيل الموائم. في أغلب الأحيان, سيتخطى DrakX\n" "هذه الخطوة بدون أي مشاكل.\n" "\n" "اذا تعذر على DrakX التحقق من الخيارات آلياً ستحتاج\n" "الى تهيئة المشغل يدوياً." #: ../../lang.pm:1 #, c-format msgid "Aruba" msgstr "أروبا" #: ../../standalone/drakbackup:1 #, c-format msgid "Users" msgstr "المستخدمون" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Preparing bootloader..." msgstr "جاري تحضير محمّل الإقلاع..." #: ../../../move/move.pm:1 #, c-format msgid "Enter your user information, password will be used for screensaver" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "Gateway (e.g. %s)" msgstr "البوابة (مثلاً %s)" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "The passwords do not match" msgstr "كلمات المرور غير متطابقة" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Examples for correct IPs:\n" msgstr "أمثلة لعناوين IP صحيحة:\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Please choose the media for backup." msgstr "فضلاً اختر وسيط النسخ الاحتياطي." #: ../../standalone/harddrake2:1 #, c-format msgid "Frequency (MHz)" msgstr "التردد (ميغاهيرتز)" #: ../../install_any.pm:1 #, c-format msgid "" "To use this saved packages selection, boot installation with ``linux " "defcfg=floppy''" msgstr "" "لاستخدام اختياراتك المحفوظة للحزم, قم ببدء التثبيت مع خيار ``linux " "defcfg=floppy''" #: ../../standalone/harddrake2:1 #, c-format msgid "the number of the processor" msgstr "رقم المعالج" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Hardware clock set to GMT" msgstr "ساعة الجهاز مضبوطة على توقيت غرينتش" #: ../../network/isdn.pm:1 #, c-format msgid "Do you want to start a new configuration ?" msgstr "هل تريد بدء عملية ضبط جديدة؟" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Give a file name" msgstr "اعط اسم ملف" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Please choose the port that your printer is connected to." msgstr "رجاء اختر المنفذ الموصلة إليه طابعتك." #: ../../standalone/livedrake:1 #, c-format msgid "Change Cd-Rom" msgstr "غيّر القرص المدمج" #: ../../lang.pm:1 #, c-format msgid "Paraguay" msgstr "البارجواي" #: ../../network/netconnect.pm:1 #, c-format msgid "Configuration is complete, do you want to apply settings ?" msgstr "تم الانتهاء من التهيئة, هل تريد تطبيق الإعدادات ؟" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Incremental/Differential Backups (do not replace old backups)" msgstr "استخدم النسخ التراكمي/الاختلافي (لا تستبدل النسخ الإحتياطية القديمة)" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Maintain /etc/dhcpd.conf:\n" " \tTo net boot clients, each client needs a dhcpd.conf entry, " "assigning an IP \n" " \taddress and net boot images to the machine. drakTermServ helps " "create/remove \n" " \tthese entries.\n" "\t\t\t\n" " \t(PCI cards may omit the image - etherboot will request the correct " "image. \n" "\t\t\tYou should also consider that when etherboot looks for the images, it " "expects \n" "\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" "\t\t\t \n" " \tA typical dhcpd.conf stanza to support a diskless client looks " "like:" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "There's no known driver for your sound card (%s)" msgstr "لا يوجد مشغل معروف لبطاقة الصوت (%s)" #: ../../standalone/drakfloppy:1 #, c-format msgid "force" msgstr "اجبار" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Exit" msgstr "خروج" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "NOTE: Depending on the printer model and the printing system up to %d MB of " "additional software will be installed." msgstr "" "ملحوظة: اعتماداً على طراز الطابعة و نظام الطباعة فسيتم تثبيت حوالي %d " "ميغابايت من البرمجيات الإضافية." #: ../../standalone/drakconnect:1 #, c-format msgid "" "You don't have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" "لم تقم بتهيئة أي واجهات.\n" "قم بتهيئتهم أولا عن طريق الضغط على 'تهيئة'" #: ../../keyboard.pm:1 #, c-format msgid "Estonian" msgstr "الإستونية" #: ../../services.pm:1 #, c-format msgid "" "Apache is a World Wide Web server. It is used to serve HTML files and CGI." msgstr "Apache هو خادم ويب. و يُستخدم لخدمة ملفات HTML و CGI." #: ../../standalone/drakbackup:1 #, c-format msgid "" "Enter your CD Writer device name\n" " ex: 0,1,0" msgstr "" "فضلاً أدخل اسم جهاز نسخ الأقراص\n" " مثال: 0,1,0" #: ../../standalone/draksec:1 #, c-format msgid "ALL" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Add/Del Clients" msgstr "أضف/احذف العملاء" #: ../../network/ethernet.pm:1 ../../standalone/drakgw:1 #: ../../standalone/drakpxe:1 #, c-format msgid "Choose the network interface" msgstr "اختر واجهة الشبكة" #: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Unknown Model" msgstr "طراز غير معروف" #: ../../harddrake/data.pm:1 #, c-format msgid "CD/DVD burners" msgstr "أجهزة نسخ CD/DVD" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" "التجزئة التي يتم اقلاعها افتراضيا\n" " (لـ MS-DOS و ليس لـ lilo)\n" #: ../../standalone/drakperm:1 #, c-format msgid "Enable \"%s\" to read the file" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "choose image" msgstr "إختر صورة" #: ../../network/shorewall.pm:1 #, c-format msgid "Firewalling configuration detected!" msgstr "تم اكتشاف إعداد للجدار الناري!" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Connection name" msgstr "اسم الإتصال" #: ../../standalone/draksplash:1 #, c-format msgid "" "x coordinate of text box\n" "in number of characters" msgstr "" "الإحداثي السيني للصندوق النصي\n" "بعدد الحروف" #: ../../fsedit.pm:1 #, c-format msgid "" "You may not be able to install lilo (since lilo doesn't handle a LV on " "multiple PVs)" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Updating package selection" msgstr "جاري تحديث اختيار الحزم" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Where do you want to mount the loopback file %s?" msgstr "أين تريد تحميل ملف loopback %s؟" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "The floppy has been successfully generated.\n" "You may now replay your installation." msgstr "" "تم توليد القرص المرن بنجاح.\n" "يمكنك الآن اعادة التثبيت." #: ../../standalone/drakbackup:1 #, c-format msgid "Use CD-R/DVD-R to backup" msgstr "استخدم CD/DVDROM للنسخ الإحتياطي" #: ../../standalone/harddrake2:1 #, c-format msgid "the number of buttons the mouse has" msgstr "عدد أزرار الفأرة" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Replay" msgstr "اعادة" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup other files" msgstr "انسخ ملفات أخرى" #: ../../install_steps.pm:1 #, c-format msgid "No floppy drive available" msgstr "لا توجد سواقة أقراص مرنة" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup files are corrupted" msgstr "ملفات النسخ الإحتياطي فاسدة" #: ../../standalone/drakxtv:1 #, c-format msgid "TV norm:" msgstr "TV norm :" #: ../../standalone/harddrake2:1 #, c-format msgid "Cpuid family" msgstr "عائلة هوية المعالج" #: ../../Xconfig/card.pm:1 #, c-format msgid "32 MB" msgstr "32 ميغابايت" #: ../../standalone/drakTermServ:1 #, c-format msgid "type: thin" msgstr "النوع: رفيع" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian AZERTY (new)" msgstr "الليتوانية AZERTY (جديد)" #: ../../standalone/harddrake2:1 #, c-format msgid "yes means the arithmetic coprocessor has an exception vector attached" msgstr "نعم تعني أن المعالج المساعد للعمليات الحسابية لديه متجه للإستثناءات" #: ../../fsedit.pm:1 #, c-format msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "Please be sure to add a /boot partition" msgstr "" "لقد اخترت تجزئة RAID برمجية كتجزئة جذرية (/).\n" "لا يستطيع أي محمّل اقلاع التعامل مع ذلك بدون تجزئة /boot.\n" "فضلاً تأكد من اضافة تجزئة /boot" #: ../../any.pm:1 #, c-format msgid "Other OS (MacOS...)" msgstr "نظام آخر (MacOS...)" #: ../../mouse.pm:1 #, c-format msgid "To activate the mouse," msgstr "لتنشيط الفأرة," #: ../../install_interactive.pm:1 #, c-format msgid "Bringing up the network" msgstr "جاري تشغيل الشبكة" #: ../../common.pm:1 #, c-format msgid "Screenshots will be available after install in %s" msgstr "ستكون لقطات الشاشة موجودة بعد التثبيت في %s" #: ../../help.pm:1 #, c-format msgid "" "More than one Microsoft partition has been detected on your hard drive.\n" "Please choose which one you want to resize in order to install your new\n" "Mandrake Linux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." msgstr "" "في الأعلى ستجد تقسيمات Linux الموجودة و التي تم ايجادها على القرص الصلب " "الخاص بك.\n" "يمكنك أن تُبقي إختيارات المعالج, و هي جيدة لأغلب أنواع التثبيت.\n" "إذا قمت بعمل أي تغييرات فيجب عليك أن تعرف التقسيم الجذر (\"/\"). لا تختر\n" "تقسيمات ضغيرة جدا و إلا لن تستطيع تثبيت برامج كافية. إذا كنت تريد تخزين " "البيانات\n" "على تقسيم مستقل فستحتاج الى عمل تقسيم لـ\"/home\"\n" "(ممكن فقط إذا كان لديك أكثر من تقسيم لLinux).\n" "\n" "كل تقسيم مُعطى بالسكل التالي: \"اسم Linux\", \"اسم ويندوز\",\n" " \"السعة\".\n" "\n" "\"اسم Linux\" مركب بالسكل التالي: \"نوع القرص الصلب\", \"رقم القرص الصلب\",\n" "\"رقم التقسيم\" (مثلا, \"hda1\").\n" "\n" "\"رقم القرص الصلب\" دائما هو حرف بعد \"hd\" أو \"sd\". بالنسبة للأقراص " "الصلبة\n" "من نوع IDE فإن:\n" " * \"a\" تعني \"القرص الصلب الأساسي على متحكم IDE الأساسي\",\n" "\n" " * \"b\" تعني \"القرص الصلب الثانوي على متحكم IDE الأساسي\",\n" "\n" " * \"c\" تعني \"القرص الصلب الأساسي على متحكم IDE الثانوي\",\n" "\n" " * \"d\" تعني \"القرص الصلب الثانوي على متحكم IDE الثانوي\",\n" "\n" "أما بالنسبة لأقراص سكزي SCSI فالحرف \"a\" يعني \"أقل معرف SCSI\", و الحرف \"b" "\"\n" "يعني \"ثاني أقل معرف SCSI\", الخ." #: ../../lang.pm:1 #, c-format msgid "Tanzania" msgstr "تنزانيا" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Computing FAT filesystem bounds" msgstr "جاري حساب روابط نظام ملفات FAT" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Backup Sources: \n" msgstr "" "\n" "مصادر المساعد :\n" #: ../../standalone/drakbackup:1 #, c-format msgid "custom" msgstr "مخصص" #: ../../standalone/logdrake:1 #, c-format msgid "Content of the file" msgstr "محتويات الملف" #: ../../any.pm:1 #, c-format msgid "Authentication LDAP" msgstr "تحقق LDAP" #: ../../install_steps_gtk.pm:1 #, c-format msgid "in order to keep %s" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "Let me pick any driver" msgstr "اسمح لي أن أختار مشغل" #: ../../standalone/net_monitor:1 #, c-format msgid "transmitted" msgstr "مبعوثة" #: ../../lang.pm:1 #, c-format msgid "Palestine" msgstr "فلسطين" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "RAID md%s\n" msgstr "RAID md%s\n" #: ../../modules/parameters.pm:1 #, c-format msgid "%d comma separated strings" msgstr "%d حرفيات مفصولة بالفاصلة" #: ../../network/netconnect.pm:1 #, c-format msgid " isdn" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Here is the full list of keyboards available" msgstr "ها هي قائمة كاملة بكل لوحات المفاتيح المتوفرة" #: ../../standalone/draksplash:1 #, c-format msgid "Theme name" msgstr "اسم السمة" #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #: ../../standalone/printerdrake:1 #, c-format msgid "/_Help" msgstr "/_مساعدة" #: ../../harddrake/sound.pm:1 #, c-format msgid "Choosing an arbitrary driver" msgstr "جاري اختيار مشغل عام" #: ../../lang.pm:1 #, c-format msgid "Cook Islands" msgstr "جزر الكوك" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "Here you can choose whether the scanners connected to this machine should be " "accessable by remote machines and by which remote machines." msgstr "" "هنا يمكنك اختيار اذا كانت الماسحات الضوئية المتصلة بهذه الماكينة يمكن الوصول " "اليها من الماكينات البعيدة و عن طريق أي ماكينات بعيدة." #: ../../standalone/draksplash:1 #, c-format msgid "the width of the progress bar" msgstr "عرض شريط التقدم" #: ../../fs.pm:1 #, c-format msgid "Formatting partition %s" msgstr "جاري تهيئة التجزئة %s" #: ../../standalone/drakbackup:1 #, c-format msgid "Hostname required" msgstr "يُحتاج الى اسم المستضيف" #: ../../standalone/drakfont:1 #, c-format msgid "Unselect fonts installed" msgstr "احذف اختيار الخطوط المثبتة" #: ../../mouse.pm:1 #, c-format msgid "Wheel" msgstr "Wheel" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Submit kernel version" msgstr "اصدارة النواة" #: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1 #: ../../install_steps_interactive.pm:1 ../../interactive.pm:1 #: ../../ugtk2.pm:1 ../../Xconfig/resolution_and_depth.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/gtk.pm:1 #: ../../interactive/http.pm:1 ../../interactive/newt.pm:1 #: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1 #: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1 #: ../../standalone/drakboot:1 ../../standalone/drakconnect:1 #: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1 #: ../../standalone/drakperm:1 ../../standalone/draksec:1 #: ../../standalone/logdrake:1 ../../standalone/mousedrake:1 #: ../../standalone/net_monitor:1 #, c-format msgid "Cancel" msgstr "الغاء" #: ../../standalone/scannerdrake:1 #, c-format msgid "Searching for configured scanners ..." msgstr "جاري البحث عن ماسحات ضوئية معدّة..." #: ../../harddrake/data.pm:1 #, c-format msgid "Videocard" msgstr "بطاقة الفيديو" #: ../../standalone/drakbackup:1 #, c-format msgid "\tBackups use tar and bzip2\n" msgstr "\tالنسخ الإحتياطية تستخدم tar و bzip2\n" #: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 #, c-format msgid "Remove Selected" msgstr "احذف المادة المختارة" #: ../../standalone/harddrake2:1 #, c-format msgid "/Autodetect _modems" msgstr "/تحقق آلي من أ_جهزة المودم" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remove printer" msgstr "احذف الطابعة" #: ../../standalone/drakbackup:1 #, c-format msgid "View Last Log" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Which services would you like to allow the Internet to connect to?" msgstr "أي خدمة تريد السماح للإنترنت أن تتصل بها؟" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Connection Type" msgstr "نوع الإتصال" #: ../../standalone/logdrake:1 #, c-format msgid "" "Welcome to the mail configuration utility.\n" "\n" "Here, you'll be able to set up the alert system.\n" msgstr "" "أهلا بكم الى أداة تهيئة البريد.\n" "\n" "هنا سيمكنك إعداد نظام التنبيه\n" #: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1 #: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/drakperm:1 #, c-format msgid "Other" msgstr "أخرى" #: ../../any.pm:1 ../../harddrake/v4l.pm:1 ../../standalone/drakfloppy:1 #, c-format msgid "Default" msgstr "الإفتراضي" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Button 2 Emulation" msgstr "محاكاة الزر 2" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Please enter a package name." msgstr "رجاءً قم بإعطاء اسم مستخدم" #: ../../security/l10n.pm:1 #, c-format msgid "Run chkrootkit checks" msgstr "شغّل اختبارات chkrootkit" #: ../../standalone/drakfont:1 #, c-format msgid "type1inst building" msgstr "بناء type1inst" #: ../../standalone/drakfont:1 #, c-format msgid "Abiword" msgstr "Abiword" #: ../../standalone/draksplash:1 #, c-format msgid "choose image file" msgstr "إختر ملف صورة" #: ../../Xconfig/card.pm:1 #, c-format msgid "X server" msgstr "خادم X" #: ../../any.pm:1 #, c-format msgid "Domain Admin User Name" msgstr "اسم المستخدم لمدير النطاق" #: ../../standalone/drakxtv:1 #, c-format msgid "There was an error while scanning for TV channels" msgstr "كان هناك خطأ أثناء ضبط قنوات التلفاز" #: ../../keyboard.pm:1 #, c-format msgid "US keyboard (international)" msgstr "لوحة مفاتيح أمريكية (دولي)" #: ../../standalone/drakbug:1 #, c-format msgid "Not installed" msgstr "غير مثبّت" #: ../../keyboard.pm:1 #, c-format msgid "Both Alt keys simultaneously" msgstr "مفتاحيّ Alt في نفس الوقت" #: ../../network/netconnect.pm:1 #, c-format msgid "LAN connection" msgstr "وصلة LAN" #: ../../standalone/logdrake:1 #, c-format msgid "/File/-" msgstr "/ملف/-" #: ../../keyboard.pm:1 #, c-format msgid "Italian" msgstr "الإيطالية" #: ../../interactive.pm:1 #, c-format msgid "Basic" msgstr "أساسي" #: ../../install_messages.pm:1 #, c-format msgid "http://www.mandrakelinux.com/en/92errata.php3" msgstr "http://www.mandrakelinux.com/en/92errata.php3" #: ../../lang.pm:1 #, c-format msgid "Honduras" msgstr "هندوراس" #: ../../help.pm:1 #, c-format msgid "pdq" msgstr "pdq" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IO" msgstr "Card IO" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "Samba server" msgstr "خادم Samba" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" msgstr "" "\n" "تجزئة الإقلاع\n" "هذه هي\n" "للإقلاع المزدوج في نظامك.\n" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "Please choose for each step whether it will replay like your install, or it " "will be manual" msgstr "" "فضلاً اختر لكل خطوة اذا كنت ستقوم بإعادتها آلياً أم أنك تريد أن يكون التثبيت " "بشكل يدوي." #: ../../standalone/scannerdrake:1 #, c-format msgid "" "You can also decide here whether scanners on remote machines should be made " "available on this machine." msgstr "" "يمكنك أيضاً أن تقرر هنا اذا كانت الماسحات الضوئية على الماكينات البعيدة يجب " "أن تكون متوفرة لهذع الماكينة." #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by FTP.\n" msgstr "\t-الشبكة عن طريق FTP.\n" #: ../../security/l10n.pm:1 #, c-format msgid "Reports check result to tty" msgstr "يقوم بتقرير نتيجة الاختبار الى الطرفية" #: ../../printer/printerdrake.pm:1 #, c-format msgid "You must enter a device or file name!" msgstr "يجب عليك ادخال جهاز أو اسم ملف!" #: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 #, c-format msgid "/_Quit" msgstr "/_خروج" #: ../../Xconfig/various.pm:1 #, c-format msgid "Graphics memory: %s kB\n" msgstr "ذاكرة بطاقة الشاشة: %s كيلوبايت\n" #: ../../standalone.pm:1 #, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2, or (at your option)\n" "any later version.\n" "\n" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software\n" "Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" msgstr "" " هذا البرنامج هو برنامج حر; يمكنك اعادة توزيعة و/أو تعديله\n" " تحت بنود رخصة GNU العمومية الشاملة (GPL) كما نُشِرت عن طريق\n" " جمعية البرمجيات الحرة; إما اإصدار الثاني من الترخيص أو\n" " أي نسخة تالية (حسب اختيارك).\n" "\n" " هذا البرنامج يُوزَّع على أمل أن يكون مفيدا,\n" " لكن دون أي ضمان’; حتى بدون الضمانة المفهومة\n" " للإتجار أو المناسبة لغرض معين. انظر\n" " رخصة GNU العمومية الشاملة للتفاصيل.\n" "\n" " يجب أن تكون قد تسلمت نسخة من ترخيص GNU العمومية الشاملة\n" " مع البرنامج; في حالة عدم تسلم الرخصة راسل جمعية البرمجيات الحرة على العنوان " "التالي\n" " Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA " "02111-1307,\n" " USA.\n" #: ../../any.pm:1 #, c-format msgid "access to compilation tools" msgstr "الوصول الى أدوات التجميع" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Global statistics" msgstr "احصائيات" #: ../../standalone/drakbackup:1 #, c-format msgid "Please select data to restore..." msgstr "رجاء اختر تاريخ الإستعادة..." #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "" "If you plan to use aboot, be carefull to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "" "اذا كنت تريد استخدام aboot, فلا تنسى أن تترك مساحة فارغة في\n" "بداية القرص (2048 قطاعات كافية)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Standard test page" msgstr "صفحة اختبارية قياسية" #: ../../standalone/drakclock:1 #, fuzzy, c-format msgid "Time Zone" msgstr "المنطقة الزمنية" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Create" msgstr "انشاء تجزئة" #: ../../standalone/drakbackup:1 #, c-format msgid "What" msgstr "ماذا " #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "There was an error ordering packages:" msgstr "كان هناك خطأ في ترتيب الحزم:" #: ../../keyboard.pm:1 #, c-format msgid "Bulgarian (BDS)" msgstr "البلغارية (BDS)" #: ../../standalone/drakTermServ:1 #, c-format msgid "Disable Server" msgstr "عطّل الخادم" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Filesystem encryption key" msgstr "مفتاح تشفير نظام الملفات" #: ../../keyboard.pm:1 #, c-format msgid "Gujarati" msgstr "غوجاراتي" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " While you can use a pool of IP addresses, rather than setup a " "specific entry for\n" " a client machine, using a fixed address scheme facilitates using the " "functionality\n" " of client-specific configuration files that ClusterNFS provides.\n" "\t\t\t\n" " Note: The '#type' entry is only used by drakTermServ. Clients can " "either be 'thin'\n" " or 'fat'. Thin clients run most software on the server via xdmcp, " "while fat clients run \n" " most software on the client machine. A special inittab, %s is\n" " written for thin clients. System config files xdm-config, kdmrc, and " "gdm.conf are \n" " modified if thin clients are used, to enable xdmcp. Since there are " "security issues in \n" " using xdmcp, hosts.deny and hosts.allow are modified to limit access " "to the local\n" " subnet.\n" "\t\t\t\n" " Note: The '#hdw_config' entry is also only used by drakTermServ. " "Clients can either \n" " be 'true' or 'false'. 'true' enables root login at the client " "machine and allows local \n" " hardware configuration of sound, mouse, and X, using the 'drak' " "tools. This is enabled \n" " by creating separate config files associated with the client's IP " "address and creating \n" " read/write mount points to allow the client to alter the file. Once " "you are satisfied \n" " with the configuration, you can remove root login privileges from " "the client.\n" "\t\t\t\n" " Note: You must stop/start the server after adding or changing " "clients." msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "" "Please choose the first number of the 10-range you wish to edit,\n" "or just hit Enter to proceed.\n" "Your choice? " msgstr "" "Please choose the first number of the 10-range you wish to edit,\n" "or just hit Enter to proceed.\n" "Your choice? " #: ../../standalone/drakTermServ:1 #, c-format msgid "" "\n" " Copyright (C) 2002 by MandrakeSoft \n" "\tStew Benedict sbenedict@mandrakesoft.com\n" "\n" msgstr "" "\n" " جميع الحقوق محفوظة (C) 2002 لـMandrakeSoft \n" "\tStew Benedict sbenedict@mandrakesoft.com\n" "\n" #: ../../standalone/draksplash:1 #, c-format msgid "Save theme" msgstr "احفظ السمة" #: ../../lang.pm:1 #, c-format msgid "Brazil" msgstr "البرازيل" #: ../../standalone/drakautoinst:1 #, c-format msgid "Auto Install" msgstr "تثبيت آلي" #: ../../network/isdn.pm:1 ../../network/netconnect.pm:1 #, c-format msgid "Network Configuration Wizard" msgstr "معالج إعداد الشبكة" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Removable media automounting" msgstr "التحميل الآلي للوسائط القابلة للإزالة" #: ../../services.pm:1 #, c-format msgid "Printing" msgstr "الطباعة" #: ../../standalone/drakbackup:1 #, c-format msgid "Enter the directory to save:" msgstr "اختر الدليل الذي سيتم حفظه:" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "There are no printers found which are directly connected to your machine" msgstr "لم يتم العثور على طابعات متصلة مباشرةً بهذه الماكينة" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Create a new partition" msgstr "انشئ تجزئة جديدة" #: ../../harddrake/sound.pm:1 #, c-format msgid "Driver:" msgstr "المشغل:" # ../../standalone/harddrake2:1, c-format #: ../../standalone/harddrake2:1 #, c-format msgid "unknown" msgstr "غير معروف" #: ../../install_interactive.pm:1 #, c-format msgid "Use fdisk" msgstr "استخدم fdisk" #: ../../mouse.pm:1 #, c-format msgid "MOVE YOUR WHEEL!" msgstr "حرك عجلة الفأرة!" #: ../../standalone/net_monitor:1 #, c-format msgid "sent: " msgstr "مُرسل: " #: ../../network/network.pm:1 #, c-format msgid "Automatic IP" msgstr "Automatic IP" #: ../../help.pm:1 #, c-format msgid "" "There you are. Installation is now complete and your GNU/Linux system is\n" "ready to use. Just click \"%s\" to reboot the system. The first thing you\n" "should see after your computer has finished doing its hardware tests is the\n" "bootloader menu, giving you the choice of which operating system to start.\n" "\n" "The \"%s\" button shows two more buttons to:\n" "\n" " * \"%s\": to create an installation floppy disk that will automatically\n" "perform a whole installation without the help of an operator, similar to\n" "the installation you just configured.\n" "\n" " Note that two different options are available after clicking the button:\n" "\n" " * \"%s\". This is a partially automated installation. The partitioning\n" "step is the only interactive procedure.\n" "\n" " * \"%s\". Fully automated installation: the hard disk is completely\n" "rewritten, all data is lost.\n" "\n" " This feature is very handy when installing a number of similar machines.\n" "See the Auto install section on our web site for more information.\n" "\n" " * \"%s\"(*): saves a list of the packages selected in this installation.\n" "To use this selection with another installation, insert the floppy and\n" "start the installation. At the prompt, press the [F1] key and type >>linux\n" "defcfg=\"floppy\" <<.\n" "\n" "(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n" "\"mformat a:\")" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Moldova" msgstr "مولدوفا" #: ../../mouse.pm:1 #, c-format msgid "Kensington Thinking Mouse" msgstr "Kensington Thinking Mouse" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Configuration of a remote printer" msgstr "تهيئة طابعة بعيدة" #: ../advertising/13-mdkexpert_corporate.pl:1 #, c-format msgid "An online platform to respond to enterprise support needs." msgstr "بيئة على الإنترنت للإستجابة لاحتياجات الدعم الفني للشركات" #: ../../network/network.pm:1 #, c-format msgid "URL should begin with 'ftp:' or 'http:'" msgstr "يجب أن يبدأ العنوان بـ 'ftp:' أو 'http:'" #: ../../keyboard.pm:1 #, c-format msgid "Oriya" msgstr "أوريا" #: ../../standalone/drakperm:1 #, c-format msgid "Add a new rule at the end" msgstr "أضف قاعدة جديدة في النهاية" #: ../../standalone/drakboot:1 #, c-format msgid "LiLo and Bootsplash themes installation successful" msgstr "تم تثبيت سمات LiLo و Bootsplash بنجاح" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can also decide here whether printers on remote machines should be " "automatically made available on this machine." msgstr "" "يمكنك كذلك أن تقرر هنا اذا كانت الطابعات الموجودة على الأجهزة البعيدة أن " "تكون متوفرة آلياً لهذه الماكينة." #: ../../modules/interactive.pm:1 #, c-format msgid "" "You may now provide options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "يمكنك الآن اعطاء الخيارات للوحدة %s.\n" "الخيارات في هيئة ``name=value name2=value2 ...'' \n" "مثلا, ``io=0x300 irq=7''" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Quit without writing the partition table?" msgstr "هل تريد الخروج بدون كتابة جدول التقسيم؟" #: ../../mouse.pm:1 #, c-format msgid "Genius NetScroll" msgstr "Genius NetScroll" #: ../../standalone/drakbackup:1 #, c-format msgid "On Hard Drive" msgstr "على القرص الصّلب" #: ../../standalone.pm:1 #, c-format msgid "Installing packages..." msgstr "جاري تركيب الجزم..." #: ../../keyboard.pm:1 #, c-format msgid "Dutch" msgstr "الهولندية" #: ../../lang.pm:1 #, c-format msgid "Angola" msgstr "أنغولا" #: ../../standalone/drakbackup:1 #, c-format msgid "The following packages need to be installed:\n" msgstr "يجب تثبيت الحزم التالية:\n" #: ../../standalone/logdrake:1 #, c-format msgid "service setting" msgstr "إعدادات الخدمات" #: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1 #, c-format msgid "Custom" msgstr "مخصص" #: ../../lang.pm:1 #, c-format msgid "Latvia" msgstr "لاتفيا" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "File is already used by another loopback, choose another one" msgstr "هذا الملف مستخدم من loopback أخرى, اختر ملفا آخر" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Read-only" msgstr "للقراءة فقط" #: ../../security/help.pm:1 #, fuzzy, c-format msgid "" "Enable/Disable name resolution spoofing protection. If\n" "\"alert\" is true, also reports to syslog." msgstr "" "Arguments: (arg, alert=1)\n" "\n" "Enable/Disable name resolution spoofing protection. If\n" "\\fIalert\\fP is true, also reports to syslog." #: ../../harddrake/sound.pm:1 #, c-format msgid "No known driver" msgstr "لا يوجد مشغل معروف" #: ../../Xconfig/card.pm:1 #, c-format msgid "1 MB" msgstr "1 ميغابايت" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "If it is not the one you want to configure, enter a device name/file name in " "the input line" msgstr "" "اذا لم تكن هذه هي التي تريد تهيئتها, أدخل اسم جهاز/اسم ملف في حقل الإدخال" #: ../../standalone/draksound:1 #, c-format msgid "" "No Sound Card has been detected on your machine. Please verify that a Linux-" "supported Sound Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" "تعذر ايجاد بطاقة صوت على جهازك. فضلاً تأكد من أن بطاقة الصوت المدعومة من " "Linux موصولة بشكل صحيح.\n" "\n" "\n" "يمكنك زيارة قاعدة بيانات العتاد المدعوم الخاصة بنا على:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" #: ../../standalone/drakconnect:1 #, c-format msgid "Configure Local Area Network..." msgstr "إعداد الشبكة المحلية..." #: ../../../move/move.pm:1 #, c-format msgid "" "The USB key seems to have write protection enabled. Please\n" "unplug it, remove write protection, and then plug it again." msgstr "" #: ../../services.pm:1 #, c-format msgid "Launch the sound system on your machine" msgstr "يشغل نظام الصوت على جهازك" #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "Verify checksum of the suid/sgid files" msgstr "if set to yes, verify checksum of the suid/sgid files." #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "Run some checks against the rpm database" msgstr "if set to yes, run some checks against the rpm database." #: ../../standalone/drakperm:1 #, c-format msgid "Execute" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Preparing printer database..." msgstr "جاري تحضير قاعدة بيانات الطابعات..." #: ../../standalone/harddrake2:1 #, c-format msgid "Information" msgstr "معلومات" #: ../../network/drakfirewall.pm:1 #, c-format msgid "No network card" msgstr "لا توجد بطاقة شبكة" #: ../../mouse.pm:1 #, c-format msgid "3 buttons" msgstr "3 أزرار" #: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 #, c-format msgid "Which filesystem do you want?" msgstr "أي نظام ملفات تريد؟" #: ../../lang.pm:1 #, c-format msgid "Malta" msgstr "مالطة" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Detailed information" msgstr "معلومات مفصّلة" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Printer default settings\n" "\n" "You should make sure that the page size and the ink type/printing mode (if " "available) and also the hardware configuration of laser printers (memory, " "duplex unit, extra trays) are set correctly. Note that with a very high " "printout quality/resolution printing can get substantially slower." msgstr "" "اعدادات الطابعة الإفتراضية\n" "\n" "يجب عليك التأكد اذا كان حجم الصفحة و نوع الحبر/وضع الطباعة (ان وجد) بالإضافة " "الى اعدادات العتاد لطابعات الليزر (الذاكرة, وحدات الدوبلكس, المنصات " "الإضافية) معدّة بشكل صحيح. لاحظ أن جودة طباعة عالية جداً قد تجهل الطباعة بطيئة." #: ../../install_any.pm:1 #, c-format msgid "This floppy is not FAT formatted" msgstr "هذا القرص المرن غير مجهز على نظام ملفات FAT" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Configuring network" msgstr "جاري اعداد الشبكة" #: ../../standalone/drakbackup:1 #, c-format msgid "" "This option will save files that have changed. Exact behavior depends on " "whether incremental or differential mode is used." msgstr "" #: ../../Xconfig/main.pm:1 #, c-format msgid "Graphic Card" msgstr "بطاقة الشاشة" #: ../../install_interactive.pm:1 #, c-format msgid "Resizing Windows partition" msgstr "جاري تغيير حجم تجزئة Windows" #: ../../lang.pm:1 #, c-format msgid "Cameroon" msgstr "الكاميرون" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider dns 1 (optional)" msgstr "DNS الأول للموفر (اختياري)" #: ../../install_interactive.pm:1 #, c-format msgid "" "You can now partition %s.\n" "When you are done, don't forget to save using `w'" msgstr "" "يمكنك الآن تجزئة %s.\n" "عندما تنتهي لا تنسى الحفظ باستخدام `w'" #: ../../keyboard.pm:1 #, c-format msgid "Saami (swedish/finnish)" msgstr "" #: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1 #: ../../standalone/drakbackup:1 ../../standalone/drakbug:1 #: ../../standalone/drakfont:1 ../../standalone/net_monitor:1 #: ../../standalone/printerdrake:1 #, c-format msgid "Close" msgstr "إغلاق" #: ../../help.pm:1 #, c-format msgid "" "\"%s\": check the current country selection. If you are not in this\n" "country, click on the \"%s\" button and choose another one. If your country\n" "is not in the first list shown, click the \"%s\" button to get the complete\n" "country list." msgstr "" "\"%s\": تأكد من اختيار البلد الحالي. اذا لم تكن في هذا\n" "البلد, اضغط على زر \"%s\" و اختر بلداً آخر. اذا لك تكن\n" "بلدك في القائمة اضغط زر \"%s\" لإظهر قائمة كاملة\n" "بالبلدان." #: ../../standalone/logdrake:1 #, c-format msgid "Calendar" msgstr "التقويم" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Restore Selected\n" "Catalog Entry" msgstr "" "استعد مدخل\n" "الكتالوغ المختار" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To use a remote lpd printer, you need to supply the hostname of the printer " "server and the printer name on that server." msgstr "" "لاستخدام طابعة lpd بعيدة, عليك اعطاء اسم مستضيف خادم الطابعة و اسم الطابعة " "على ذلك الخادم." #: ../../lang.pm:1 #, c-format msgid "Iceland" msgstr "آيسلندا" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Network & Internet Configuration" msgstr "اعدادات الشبكة" #: ../../common.pm:1 #, c-format msgid "consolehelper missing" msgstr "consolehelper missing" #: ../../services.pm:1 #, c-format msgid "stopped" msgstr "متوقفة" #: ../../standalone/harddrake2:1 #, c-format msgid "Whether the FPU has an irq vector" msgstr "اذا كان الـFPU لديه متجه IRQ" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Ext2" msgstr "Ext2" #: ../../ugtk2.pm:1 #, c-format msgid "Expand Tree" msgstr "Expand Tree" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "The old \"%s\" driver is blacklisted.\n" "\n" "It has been reported to oops the kernel on unloading.\n" "\n" "The new \"%s\" driver'll only be used on next bootstrap." msgstr "" "مشغل \"%s\" القديم على القائمة السوداء.\n" "\n" "في بعض الحالات قيل أنه يسبب انهيار في النواة عند ازالة التحميل.\n" "\n" "مشغل \"%s\" الجديد سيتم استخدامه عند تشغيل الجهاز في المرة القادمة." #: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Expert Mode" msgstr "وضعية الخبير" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer options" msgstr "خيارات الطابعة" #: ../../standalone/drakgw:1 #, c-format msgid "Local Network adress" msgstr "عنوان الشبكة المحلية" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup your System files. (/etc directory)" msgstr "انسخ ملفات النظام: (دليل /etc)" #: ../../security/help.pm:1 #, fuzzy, c-format msgid "Set the user umask." msgstr "" "Arguments: (umask)\n" "\n" "Set the user umask." #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You now have the opportunity to download updated packages. These packages\n" "have been updated after the distribution was released. They may\n" "contain security or bug fixes.\n" "\n" "To download these packages, you will need to have a working Internet \n" "connection.\n" "\n" "Do you want to install the updates ?" msgstr "" "تستطيع الآن تنزيل الحزم المحدّثة. هذه الحزم\n" "تم تحديثها بعد اصدار التوزيعة. قد\n" "تحتوي على اصلاحات أمنية أو اصلاحات لعيوب برمجية.\n" "\n" "لتنزيل هذه الحزم, تحتاج الى أن تكون لديك اتصال \n" "بالإنترنت.\n" "\n" "هل تريد تنزيل هذه التحديثات ؟" #: ../../standalone/logdrake:1 #, c-format msgid "Samba Server" msgstr "خادم Samba" #: ../../standalone/drakxtv:1 #, c-format msgid "Australian Optus cable TV" msgstr "Australian Optus cable TV" #: ../../install_steps_newt.pm:1 #, c-format msgid "" " / between elements | selects | next screen " msgstr "" " / between elements | selects | next screen " #: ../../standalone/drakTermServ:1 #, c-format msgid "Subnet:" msgstr "Subnet:" #: ../../lang.pm:1 #, c-format msgid "Zimbabwe" msgstr "زيمبابوي" #: ../../standalone/drakbackup:1 #, c-format msgid "When" msgstr "متى " #: ../../network/adsl.pm:1 #, c-format msgid "" "You need the Alcatel microcode.\n" "Download it at:\n" "%s\n" "and copy the mgmt.o in /usr/share/speedtouch" msgstr "" "تحتاج الى alcatel microcode.\n" "قم بتنزيلها على\n" "%s\n" "و انسخ الملف mgmt.o الى /usr/share/speedtouch" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Hour" msgstr "هندوراس" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Second DNS Server (optional)" msgstr "خادم DNS الثاني (اختياري)" #: ../../lang.pm:1 #, c-format msgid "Finland" msgstr "فنلندا" #: ../../Xconfig/various.pm:1 #, c-format msgid "Color depth: %s\n" msgstr "عمق الألوان: %s\n" #: ../../install_steps_gtk.pm:1 #, c-format msgid "You can't unselect this package. It must be upgraded" msgstr "لا يمكنك ازالة اختيار هذه الحزمة. يجب ترقيتها" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Loading from floppy" msgstr "جاري التحميل من القرص المرن" #: ../../standalone/drakclock:1 #, c-format msgid "Timezone - DrakClock" msgstr "" #: ../../security/help.pm:1 #, fuzzy, c-format msgid "Enable/Disable the logging of IPv4 strange packets." msgstr "" "Arguments: (arg)\n" "\n" "Enable/Disable the logging of IPv4 strange packets." #: ../../lang.pm:1 #, c-format msgid "Slovenia" msgstr "سلوفينيا" #: ../../standalone/mousedrake:1 #, c-format msgid "Mouse test" msgstr "اختبار الفأرة" #: ../../standalone/drakperm:1 #, c-format msgid "" "Drakperm is used to see files to use in order to fix permissions, owners, " "and groups via msec.\n" "You can also edit your own rules which will owerwrite the default rules." msgstr "" "يُستخدم Drakperm لاستعراض الملفات التي يتم استخدامها لتعديل الصلاحيات, و " "الملاك و المستخدمين باستخدام msec.\n" "يمكنك كذلك تحرير قواعدك الخاصة التي ستُكتَب فوق القواهد الإفتراضية." #: ../../any.pm:1 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" "أدخل مستخدم\n" "%s" #: ../../standalone/harddrake2:1 #, c-format msgid "" "- PCI and USB devices: this lists the vendor, device, subvendor and " "subdevice PCI/USB ids" msgstr "" "- أجهزة PCI و USB: هذا يعرض قائمة المصنعين و الأجهزة و المصنعين الثانويين و " "الأجهزة الثانوية لهويات PCI/USB" #: ../../standalone/draksplash:1 #, c-format msgid "ProgressBar color selection" msgstr "إختيار لون شريط التحميل" #: ../../any.pm:1 #, c-format msgid "" "Here are the entries on your boot menu so far.\n" "You can create additional entries or change the existing ones." msgstr "" "ها هنا المدخلات المختلفة.\n" "يمكنك اضافة مدخلات أخرى أو تغيير الموجودين." #: ../../help.pm:1 #, c-format msgid "/dev/hda" msgstr "/dev/hda" #: ../../help.pm:1 #, c-format msgid "/dev/hdb" msgstr "/dev/hdb" #: ../../standalone/drakbug:1 #, c-format msgid "" "Application Name\n" "or Full Path:" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" "تشغل الأوامر المُجدولة عن طريق أمر at عند الوقت المحدد\n" "لتشغيل at, و تقوم بتشغيل الأوامر الدقعية عندما يكون متوسط التحميل قليلاَ." #: ../../harddrake/v4l.pm:1 #, c-format msgid "Radio support:" msgstr "دعم الراديو:" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing SANE packages..." msgstr "جاري تثبيت حزم SANE..." #: ../../any.pm:1 #, c-format msgid "LDAP" msgstr "LDAP" #: ../../bootloader.pm:1 #, c-format msgid "SILO" msgstr "SILO" #: ../../diskdrake/removable.pm:1 #, c-format msgid "Change type" msgstr "غيّر النوع" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid ", USB printer #%s" msgstr ", طابعة USB #%s" #: ../../any.pm:1 #, c-format msgid "SILO Installation" msgstr "تثبيت SILO" #: ../../install_messages.pm:1 #, c-format msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "\n" "For information on fixes which are available for this release of Mandrake " "Linux,\n" "consult the Errata available from:\n" "\n" "\n" "%s\n" "\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Mandrake Linux User's Guide." msgstr "" "تهانينا, التثبيت قد انتهى.\n" "احذف وسيط الإقلاع و اضغط زر ادخل لإعادة التشغيل.\n" "\n" "\n" "لمعلومات حول الإصلاحات المتوفرة لهذا الإصدار من Mandrake Linux,\n" "زر صفحة تصحيح الأخطاء المتوفرة من:\n" "\n" "\n" "%s\n" "\n" "\n" "المعلومات حول تهيئة النظام متوفرة في فصل\n" "ما بعد التثبيت في دليل مستخدم Mandrake الرسمي." #: ../../standalone/drakclock:1 #, fuzzy, c-format msgid "Enable Network Time Protocol" msgstr "استعد عن طريق بروتوكول الشبكة: %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "paranoid" msgstr "مرتفع بجنون" #: ../../security/l10n.pm:1 #, c-format msgid "Do not send mails when unneeded" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Your scanner(s) will not be available on the network." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Send mail report after each backup to:" msgstr "أرسل تقريراً بريدياً بعد كل عملية نسخ الى:" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "This command you can also use in the \"Printing command\" field of the " "printing dialogs of many applications. But here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" "يمكنك استخدام هذا الأمر أيضاً في حقل \"أمر الطباعة\" في مربعات حوار الطابعة " "في العديد من التطبيقات. لكن هنا لا تقم بإعطاء اسم الملف لأن ملف الطباعة يتم " "توفيره عن طريق التطبيق.\n" #: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Resolution" msgstr "دقة العرض" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print to a SMB printer, you need to provide the SMB host name (Note! It " "may be different from its TCP/IP hostname!) and possibly the IP address of " "the print server, as well as the share name for the printer you wish to " "access and any applicable user name, password, and workgroup information." msgstr "" "للطباعة الى طابعة SMB, ستحتاج الى اعطاء اسم مستضيف SMB (ملحوظة! قد يكون " "مختلفاً عن اسم مستضيف TCP/IP!) و ربما عنوان IP الخاص بخادم الطابعة, اضافة الى " "اسم المشاركة لطابعة التي تود الوصول اليها بالإضافة الى اسم مستخدم, كلمة " "مرور, و مجموعة عمل مناسبة." #: ../../security/help.pm:1 #, fuzzy, c-format msgid "" " Enabling su only from members of the wheel group or allow su from any user." msgstr "" "Arguments: (arg)\n" "\n" " Enabling su only from members of the wheel group or allow su from any user." #: ../../standalone/drakgw:1 #, c-format msgid "reconfigure" msgstr "إعداة الإعداد" #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your card can have 3D hardware acceleration support with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" "يمكن لبطاقتك التمتع بدعم للرسوم ثلاثية الأبعاد مع XFree %s, \n" "لاحظ أن هذا الدعم تجريبي و قد يتسبب في ايقاف جهازك." #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "Shell timeout" msgstr "الوقت الأقصى لإقلاع النواة" #: ../../standalone/logdrake:1 #, c-format msgid "Xinetd Service" msgstr "خدمات Xinetd" #: ../../any.pm:1 #, c-format msgid "access to network tools" msgstr "الوصول الى أدوات الشبكة" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Firmware-Upload for HP LaserJet 1000" msgstr "Firmware-Upload for HP LaserJet 1000" #: ../advertising/03-software.pl:1 #, c-format msgid "" "And, of course, push multimedia to its limits with the very latest software " "to play videos, audio files and to handle your images or photos." msgstr "" "Mandrake Linux 9.2 يمكّنك من استخدام آخر اصدارات البرامج لتشغيل الملفات " "الصوتية, و تحرير الصور, و تشغيل ملفات الفيديو" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Here is a list of all auto-detected printers. " msgstr "ها هي قائمة بكل الطابعات المتحقَّق منها آلياً. " #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" "خطأ أثناء تثبيت aboot, \n" "حاول الإجبار على التثبيت حتى و لو أدي ذلك لتدمير التجزئة الأولى؟" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Restore Selected\n" "Files" msgstr "" "استعد الملفات\n" "المختارة" #: ../../standalone/drakbackup:1 #, c-format msgid "" "%s exists, delete?\n" "\n" "Warning: If you've already done this process you'll probably\n" " need to purge the entry from authorized_keys on the server." msgstr "" "%s موجود, هل تريد حذفه؟\n" "\n" "تحذير: اذا قمت بهذه العملية مسبقاً غالباً\n" " ستحتاج الى حذف المدخل من authorized_keys على الخادم." #: ../../network/tools.pm:1 #, c-format msgid "Please fill or check the field below" msgstr "فضلاً املأ أو أشّر على الحقل أدناه" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Do you want to save /etc/fstab modifications" msgstr "هل تريد حفظ تعديلات /etc/fstab" #: ../../standalone/drakconnect:1 #, c-format msgid "Boot Protocol" msgstr "بروتوكول الإقلاع" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "LVM-disks %s\n" msgstr "أقراص LVM %s\n" #: ../../services.pm:1 #, c-format msgid "On boot" msgstr "عند الإقلاع" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "The package %s is needed. Install it?" msgstr "الحزمة %s يجب أن تُثبّت. هل تريد تثبيتها؟" # U+200F (RTL mark) has been inserted after "Bus" so the display # on screen is correctly "datadatadata :Bus xxxxxxxx" (with xxxx arabic), # and not "Bus: datadatadata xxxxxxxx" #: ../../standalone/harddrake2:1 #, c-format msgid "Bus identification" msgstr "معرف الـ Bus‏" #: ../../lang.pm:1 #, c-format msgid "Vatican" msgstr "الفاتيكان" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Please make a backup of your data first" msgstr "رجاء قم بعمل نسخة احتياطية من بياناتك أولا" #: ../../harddrake/data.pm:1 #, c-format msgid "ADSL adapters" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "You have more than one hard drive, which one do you install linux on?" msgstr "لديك أكثر من قرص صلب, في أيهم تريد تثبيت Linux؟" #: ../../lang.pm:1 #, c-format msgid "Eritrea" msgstr "اريتريا" #: ../../standalone/drakTermServ:1 #, c-format msgid "Boot ISO" msgstr "ملف ISO الإقلاع" #: ../../network/adsl.pm:1 #, fuzzy, c-format msgid "Firmware needed" msgstr "اذا احتجته" #: ../../standalone/drakfont:1 #, c-format msgid "Remove List" msgstr "احذف القائمة" #: ../advertising/05-desktop.pl:1 #, c-format msgid "A customizable environment" msgstr "بيئة قابلة للتخصيص" #: ../../keyboard.pm:1 #, c-format msgid "Inuktitut" msgstr "اينوكتيتوت" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Some protocols, like rsync, may be configured at the server end. Rather " "than using a directory path, you would use the 'module' name for the service " "path." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Morocco" msgstr "المغرب" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Which printer model do you have?" msgstr "ما هو نوع الطابعة لديك؟" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Add a new printer" msgstr "أضف طابعة جديدة" #: ../../standalone/drakbackup:1 #, c-format msgid " All of your selected data have been " msgstr " كل البيانات المختارة تم " #: ../../lang.pm:1 #, c-format msgid "Nepal" msgstr "نيبال" #: ../../standalone/drakTermServ:1 #, c-format msgid "<-- Delete" msgstr "<-- حذف" #: ../../harddrake/data.pm:1 #, c-format msgid "cpu # " msgstr "cpu # " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "chunk size" msgstr "حجم chunk" #: ../../security/help.pm:1 #, fuzzy, c-format msgid "" "If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n" "\n" "If set to NONE, no issues are allowed.\n" "\n" "Else only /etc/issue is allowed." msgstr "" "Arguments: (arg)\n" "\n" "If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg" "\\fP = NONE no issues are\n" "allowed else only /etc/issue is allowed." #: ../../security/help.pm:1 #, fuzzy, c-format msgid " Enable/Disable sulogin(8) in single user level." msgstr "" "Arguments: (arg)\n" "\n" " Enable/Disable sulogin(8) in single user level." #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "commands before booting, or 'c' for a command-line." msgstr "commands before booting, or 'c' for a command-line." #: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, c-format msgid "Problems installing package %s" msgstr "كانت هناك مشاكل في تثبيت الحزمة %s" #: ../../standalone/logdrake:1 #, c-format msgid "You will receive an alert if the load is higher than this value" msgstr "سوف تستلم تنبيها اذا كان التحميل أعلى من هذه القيمة" #: ../../standalone/scannerdrake:1 #, c-format msgid "Add a scanner manually" msgstr "أضف ماسح ضوئي يدوياً" #: ../../standalone/printerdrake:1 #, c-format msgid "Refresh" msgstr "تحديث" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Reload partition table" msgstr "إعادة تحميل جدول التقسيم" #: ../../standalone/drakboot:1 #, c-format msgid "Yes, I want autologin with this (user, desktop)" msgstr "نعم, أريد دخولا آليا مع هذا )المستخدم, سطح المكتب(" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore Selected" msgstr "" "استعد الملفات\n" "المختارة" #: ../../standalone/drakfont:1 #, c-format msgid "Search for fonts in installed list" msgstr "ابحث عن الخطوط في القائمة المثبتة" #: ../../standalone/drakgw:1 #, c-format msgid "The Local Network did not finish with `.0', bailing out." msgstr "الشبكة المحلية لم تنته بـ`0', جاري الخروج." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Boot" msgstr "الإقلاع" #: ../../standalone/drakbackup:1 #, c-format msgid " and the CD is in the drive" msgstr "" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Tuner type:" msgstr "نوع التونر:" #: ../../help.pm:1 #, c-format msgid "" "Now, it's time to select a printing system for your computer. Other OSs may\n" "offer you one, but Mandrake Linux offers two. Each of the printing system\n" "is best suited to particular types of configuration.\n" "\n" " * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n" "if you have a direct connection to your printer, you want to be able to\n" "panic out of printer jams, and you do not have networked printers. (\"%s\"\n" "will handle only very simple network cases and is somewhat slow when used\n" "with networks.) It's recommended that you use \"pdq\" if this is your first\n" "experience with GNU/Linux.\n" "\n" " * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n" "printing to your local printer or to one halfway around the planet. It is\n" "simple to configure and can act as a server or a client for the ancient\n" "\"lpd \" printing system, so it compatible with older operating systems\n" "which may still need print services. While quite powerful, the basic setup\n" "is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n" "sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n" "front-ends for printing or choosing printer options and for managing the\n" "printer.\n" "\n" "If you make a choice now, and later find that you don't like your printing\n" "system you may change it by running PrinterDrake from the Mandrake Control\n" "Center and clicking the expert button." msgstr "" "الآن, حان وقت اختيار نظام الطباعة لنظامك. توفر أنظمة التشغيل الأخرى\n" "نظام طباعة واحد, لكن Mandrake Linux يوفر لك نظامين. كل نظام مناسب\n" "لنوغ معين من التهيئة.\n" "\n" " * \"%s\"--و هو اختصار لـ``print, don't queue'' أي ``اطبع و لا تصف'', هذا هو " "الخيار الأمثل\n" "اذا كانت لديك وصلة مباشرة بالطابعة, و تريد تفادي أي ارتباك في الطابعة\n" "و لديك طابعات على الشبكة.(يقوم \"%s\"بالتعامل مع حالات الشبكة البسيطة\n" "و يعيبه البطئ عند الاستخدام مع الشبكات). من الأفضل أن تستخدم \"pdq\" اذا.\n" "كانت هذه تجربتك الأولى مع نظام Linux.\n" "\n" " * \"%s\" - ``Common UNIX Printing System'', هو الخيار الأمثل\n" "للطباعة على طابعتك المحلية أو حتى على طابعة في النصف الآخر من الكوكب. انه\n" "سهل الإعداد و يمكن أن يتصرف كخادم أو كعميل لأنظمة طباعة \"lpd\"\n" "القديمة, لذا فإنه متوافق مع أنظمة التشغيل القديمة\n" "التي لا تزال تحتاج الى خدمات الطباعة.بينما التهيئة سهلة\n" "و قوية مثل \"pdq\". اذا كنت تحتاج الى محاكاة خادم \"lpd\", تأكد\n" "من تشغيل مراقب \"cups-lpd\". يحتوي %s على واجهات\n" "رسومية للطباعة أو اختيار خيارات الطابعة و إدارة\n" "الطابعة.\n" "\n" "اذا قمت يتقرير اختيارك الآن, ثم لم يعجبك نظام الطباعة\n" "فيما بعد, يمكنك تغييره عن طريق تشغيل PrinterDrake من مركز تحكم Mandrake\n" "و النقر على زر الخبير." #: ../../keyboard.pm:1 #, c-format msgid "\"Menu\" key" msgstr "مفتاح \"Menu\"" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "\n" "Please check whether Printerdrake did the auto-detection of your printer " "model correctly. Find the correct model in the list when a wrong model or " "\"Raw printer\" is highlighted." msgstr "" "\n" "\n" "فضلاً تأكد من قيام Printerdrake باكتشاف طراز طابعتك بشكل صحيح. اعثر على " "الطراز الصحيح اذا تم اختيار طراز خطأ أو \"طابعة خام\"." #: ../../standalone/draksec:1 #, c-format msgid "Security Administrator:" msgstr "مدير الأمن:" #: ../../security/help.pm:1 #, fuzzy, c-format msgid "Set the shell timeout. A value of zero means no timeout." msgstr "" "Arguments: (val)\n" "\n" "Set the shell timeout. A value of zero means no timeout." #: ../../network/tools.pm:1 #, c-format msgid "Firmware copy succeeded" msgstr "" #: ../../../move/tree/mdk_totem:1 #, c-format msgid "" "You can't use another CDROM when the following programs are running: \n" "%s" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check permissions of files in the users' home." msgstr "if set to yes, check permissions of files in the users' home." #: ../../standalone/drakconnect:1 #, c-format msgid "" "You don't have an Internet connection.\n" "Create one first by clicking on 'Configure'" msgstr "" "ليست لديك أي اتصالات إنترنت.\n" "قم بعمل اتصال أولا باستخدام 'تهيئة'" #: ../../standalone/drakfont:1 #, c-format msgid "Fonts copy" msgstr "نقل الخطوط" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Automated" msgstr "آلي" #: ../../Xconfig/test.pm:1 #, c-format msgid "Do you want to test the configuration?" msgstr "هل تريد تجربة الإعداد؟" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/" "GIMP." msgstr "تم حذف الطابعة \"%s\" من Star Office/OpenOffice.org/GIMP بنجاح." #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Save packages selection" msgstr "احفظ اختيار الحزم" #: ../../standalone/printerdrake:1 #, c-format msgid "/_Actions" msgstr "/_أحداث" #: ../../standalone/drakautoinst:1 #, c-format msgid "Remove the last item" msgstr "احذف المادة الأخيرة" #: ../../standalone/drakbackup:1 #, c-format msgid "User list to restore (only the most recent date per user is important)" msgstr "قائمة المستخدمين الذين سيتم استعادتهم" #: ../../standalone/drakTermServ:1 #, c-format msgid "No net boot images created!" msgstr "لم يتم انشاء صور اقلاع عبر الشبكة!" #: ../../network/adsl.pm:1 #, c-format msgid "use pptp" msgstr "استخدم pptp" #: ../../services.pm:1 #, c-format msgid "Choose which services should be automatically started at boot time" msgstr "اختر أي خدمات تريدها أن تبدأ آلياً عند التثبيت" #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "Check files/directories writable by everybody" msgstr "if set to yes, check files/directories writable by everybody." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Learn how to use this printer" msgstr "تعلم كيف تستخدم هذه الطابعة" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Configure the network now" msgstr "قم بتهيئة الشبكة" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Choose a mirror from which to get the packages" msgstr "اختر مرآة سيتم من خلالها تنزيل الحزم" #: ../../install_interactive.pm:1 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occured: %s" msgstr "" "لم تتمكن أداة تغيير حجم FAT من التعامل مع تجزئتك, \n" "ظهر الخطأ التالي: %s" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Size: " msgstr "الحجم: " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Which sector do you want to move it to?" msgstr "أي قطاع تريد نقله؟" #: ../../lang.pm:1 #, c-format msgid "Bahamas" msgstr "جزر الباهاما" #: ../../interactive/stdio.pm:1 #, c-format msgid "Do you want to click on this button?" msgstr "Do you want to click on this button?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Manual configuration" msgstr "تهيئة يدوية" #: ../../standalone/logdrake:1 #, c-format msgid "search" msgstr "بحث" #: ../../services.pm:1 #, c-format msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" "هذه الحزمة تقوم بتحميل خريطة لوحة المفاتيح المختارة كما\n" "تم تعيينها في /etc/sysconfig/keyboard. يمكن اختيار لوخة المفاتيح باستخدام " "أداة kbdconfig.\n" "يجب تركها ممكّنة في أغلب الأجهزة." #: ../../Xconfig/card.pm:1 #, c-format msgid "Xpmac (installation display driver)" msgstr "Xpmac (مشغل عرض التثبيت)" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Zeroconf host name must not contain a ." msgstr "يجب أن يحتوي اسم مستضيف Zeroconf على ." #: ../../security/help.pm:1 #, fuzzy, c-format msgid " Accept/Refuse icmp echo." msgstr "" "Arguments: (arg)\n" "\n" " Accept/Refuse icmp echo." #: ../../services.pm:1 #, c-format msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" "Syslog هي الوسيلة التي تستخدمها العديد من المراقبات لتسجيل الرسائل\n" "الى ملفات سجلات عديدة. انها فكرة جيدة أن تقوم دائماً بتشغيل syslog." #: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Unknown/Others" msgstr "غير معروف/أخرى" #: ../../standalone/drakxtv:1 #, c-format msgid "No TV Card detected!" msgstr "لم يتم ايجاد بطاقة تلفاز!" #: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1 #: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Options" msgstr "خيارات" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The printer \"%s\" is set as the default printer now." msgstr "تم تعيين الطابعة \"%s\" كطابعة افتراضية الآن." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are configuring an OKI laser winprinter. These printers\n" "use a very special communication protocol and therefore they work only when " "connected to the first parallel port. When your printer is connected to " "another port or to a print server box please connect the printer to the " "first parallel port before you print a test page. Otherwise the printer will " "not work. Your connection type setting will be ignored by the driver." msgstr "" "أنت تقوم بتهيئة طابعة OKI laser winprinter. هذه الطابعات\n" "تستخدم بروتوكول اتصالات خاص و لذا فهي تعمل فقط عندما تكون متصلة بالمنفذ " "المتوازي الأول. عندما تكون الطابعة متصلة بمنفذ آخر أو بخادم طباعة فمن فضلك " "قم بتوصيل الطابعة الى المنفذ المتوازي الأول قبل أن تطبع صفحة اختبارية. ان لم " "تفعل ذلك فلن تعمل الطابعة. اعداد نوع الوصلة سيتم تجاهله من المشغّل." #: ../../standalone/harddrake2:1 #, c-format msgid "generation of the cpu (eg: 8 for PentiumIII, ...)" msgstr "جيل المعالج (مثال: 8 لبنتيوم III, ...)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detected" msgstr "تحقق آلي" #: ../../standalone/drakpxe:1 #, c-format msgid "" "You are about to configure your computer to install a PXE server as a DHCP " "server\n" "and a TFTP server to build an installation server.\n" "With that feature, other computers on your local network will be installable " "using this computer as source.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" "أنت على وشك تهيئة جهازك لتثبيت خادم PXE كخادم DHCP\n" "و خادم TFTP لبناء خادم تثبيت.\n" "باستخدام هذه الميزة تكون الحواسيب الأخرى على الشبكة المحلية قابلة للتثبيت من " "هذا الجهاز.\n" "\n" "تأكد من أنك قمت بتهيئة الشبكة/الإنترنت باستخدام drakconnect قبل المتابعة.\n" "\n" "ملحوظة: تحتاج الى موائم شبكة مخصص لإعداد الشبكة المحلية (LAN)." #: ../../harddrake/sound.pm:1 #, fuzzy, c-format msgid "" "OSS (Open Sound System) was the first sound API. It's an OS independent " "sound API (it's available on most UNIX(tm) systems) but it's a very basic " "and limited API.\n" "What's more, OSS drivers all reinvent the wheel.\n" "\n" "ALSA (Advanced Linux Sound Architecture) is a modularized architecture " "which\n" "supports quite a large range of ISA, USB and PCI cards.\n" "\n" "It also provides a much higher API than OSS.\n" "\n" "To use alsa, one can either use:\n" "- the old compatibility OSS api\n" "- the new ALSA api that provides many enhanced features but requires using " "the ALSA library.\n" msgstr "" "OSS (Open Sound System) was the first sound API. It's an OS independant " "sound API (it's available on most UNIX(tm) systems) but it's a very basic " "and limited API.\n" "What's more, OSS drivers all reinvent the wheel.\n" "\n" "ALSA (Advanced Linux Sound Architecture) is a modularized architecture " "which\n" "supports quite a large range of ISA, USB and PCI cards.\n" "\n" "It also provides a much higher API than OSS.\n" "\n" "To use alsa, one can either use:\n" "- the old compatibility OSS api\n" "- the new ALSA api that provides many enhanced features but requires using " "the ALSA library.\n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "No free space for 1MB bootstrap! Install will continue, but to boot your " "system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" "No free space for 1MB bootstrap! Install will continue, but to boot your " "system, you'll need to create the bootstrap partition in DiskDrake" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the printer you want to set up or enter a device name/file " "name in the input line" msgstr "" "فضلاً اختر الطابعة التي تريد اعدادها أو أدخل اسم جهاز/اسم ملف في حقل الإدخال" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Refuse" msgstr "ارفض" #: ../../standalone/draksec:1 #, c-format msgid "LOCAL" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "HFS" msgstr "HFS" #: ../../services.pm:1 #, c-format msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "" "HardDrake يقوم بالتحقق من العتاد, و يقوم بتهيئة العتاد\n" "الجديد/المتغير بشكل اختياري." #: ../../fs.pm:1 #, c-format msgid "Creating and formatting file %s" msgstr "جاري انشاء و تجهيز الملف %s" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check additions/removals of sgid files." msgstr "if set to yes, check additions/removals of sgid files." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The HP LaserJet 1000 needs its firmware to be uploaded after being turned " "on. Download the Windows driver package from the HP web site (the firmware " "on the printer's CD does not work) and extract the firmware file from it by " "uncompresing the self-extracting '.exe' file with the 'unzip' utility and " "searching for the 'sihp1000.img' file. Copy this file into the '/etc/" "printer' directory. There it will be found by the automatic uploader script " "and uploaded whenever the printer is connected and turned on.\n" msgstr "" "The HP LaserJet 1000 needs its firmware to be uploaded after being turned " "on. Download the Windows driver package from the HP web site (the firmware " "on the printer's CD does not work) and extract the firmware file from it by " "uncompresing the self-extracting '.exe' file with the 'unzip' utility and " "searching for the 'sihp1000.img' file. Copy this file into the '/etc/" "printer' directory. There it will be found by the automatic uploader script " "and uploaded whenever the printer is connected and turned on.\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose an existing LVM to add to" msgstr "اختر LVM l,جود للاضافة" #: ../../standalone/drakfont:1 #, c-format msgid "xfs restart" msgstr "xfs restart" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printer \"%s\" already exists,\n" "do you really want to overwrite its configuration?" msgstr "" "الطابعة \"%s\" موجودة مسبقاً,\n" "هل تريد فعلاً الكتابة فوق التهيئة الخاصة بها؟" #: ../../standalone/scannerdrake:1 #, c-format msgid "Use the scanners on hosts: " msgstr "استخدم الماسحات الضوئية على المستضيفات: " #: ../../standalone/drakfont:1 #, c-format msgid "Unselected All" msgstr "تم ازالة اختيار الكل" #: ../../install_steps_interactive.pm:1 ../../network/tools.pm:1 #, c-format msgid "No partition available" msgstr "لا توجد تجزئة" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Printer Management \n" msgstr "ادارة المستخدمين \n" #: ../../standalone/logdrake:1 #, c-format msgid "Domain Name Resolver" msgstr "Domain Name Resolver" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Encryption key (again)" msgstr "مفاتح التشفير (مرة أخرى)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Samba share name missing!" msgstr "اسم مشاركة Samba مفقود!" #: ../../standalone/drakfont:1 #, c-format msgid "True Type install done" msgstr "تم تثبيت خطوط True Type" #: ../../standalone/harddrake2:1 #, c-format msgid "Detection in progress" msgstr "جاري التحقق" #: ../../standalone/drakTermServ:1 #, c-format msgid "Build Whole Kernel -->" msgstr "ابني كل النواة -->" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "modem" msgstr "المودم" #: ../../lang.pm:1 #, c-format msgid "Welcome to %s" msgstr "أهلا بكم في %s" #: ../../standalone/drakhelp:1 #, c-format msgid "" " drakhelp 0.1\n" "Copyright (C) 2003 MandrakeSoft.\n" "This is free software and may be redistributed under the terms of the GNU " "GPL.\n" "\n" "Usage: \n" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Please insert the Update Modules floppy in drive %s" msgstr "فضلاً أدخل قرص وحدات التحديث في السواقة %s" #: ../../standalone/drakboot:1 #, c-format msgid "Bootsplash" msgstr "Bootsplash!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "is directly connected to your system" msgstr "" "الطابعة التالية\n" "\n" "%s%s\n" "متصلة مباشرةً بنظامك" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer sharing on hosts/networks: " msgstr "مشاركة الطابعات على المستضيفات/الشبكات: " #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "The \"%s\" command also allows to modify the option settings for a " "particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \". " msgstr "" "\n" "الأمر \"%s\" يسمح لك كذلك يتعديل اعدادات الخيارات لوظيفة طباعة محددة. بكل " "بساطة أضف الإعداد المطلوب الى سطر الآوامر, مثال \"%s \". " #: ../../standalone/drakclock:1 #, fuzzy, c-format msgid "DrakClock" msgstr "Drakbackup" #: ../../modules/interactive.pm:1 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without them. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" "في بعض الأحيان يحتاج مشغل %s معلومات اضافية لكي يعمل\n" "بشكل صحيح, الا أنه يمكنه العمل جيدا بدونها. هل تريد تحديد\n" "خيارات اضافية له أو تسمح للمشغل بالتحقق في جهازك\n" "عن المعلومات التي سيحتاجها؟ في بعض الأحيان, قد يتسبب التحقق في تعليق الجهاز, " "لكن\n" "لا يجب أن يتسبب ذلك في أي مشاكل." #: ../../standalone/drakbackup:1 #, c-format msgid "Not the correct CD label. Disk is labelled %s." msgstr "علامة القرص ليست العلامة الصحيحة. علامة القرص هي %s." #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "" "\n" "- Daemon, %s via:\n" msgstr "" "\n" "- Daemon (%s) include :\n" #: ../../lang.pm:1 #, c-format msgid "Cuba" msgstr "كوبا" #: ../../standalone/drakbackup:1 #, c-format msgid "October" msgstr "أكتوبر" #: ../../lang.pm:1 #, c-format msgid "Belize" msgstr "بيليز" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Searching for new printers..." msgstr "جاري البحث عن طابعات جديدة..." #: ../../standalone/drakbackup:1 #, c-format msgid " (multi-session)" msgstr " (متعدد الجلسات)" #: ../../any.pm:1 #, c-format msgid "Kernel Boot Timeout" msgstr "الوقت الأقصى لإقلاع النواة" #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "يمكن لبطاقتك الحصول على دعم للتسريع ثلاثي الأبعاد لكن فقط مع XFree %s.\n" "بطاقتك مدعومة عن طريق XFree %s التي يمكن أن تكون مدعومة بشل أفضل في الوضع " "ثنائي الأبعاد." #: ../../security/help.pm:1 #, fuzzy, c-format msgid " Activate/Disable daily security check." msgstr "" "Arguments: (arg)\n" "\n" " Activate/Disable daily security check." #: ../../standalone/drakbackup:1 #, c-format msgid "\t-CD-R.\n" msgstr "\t-القرص المدمج.\n" #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "Enable libsafe if libsafe is found on the system" msgstr "" "Arguments: (arg)\n" "\n" "Enable/Disable libsafe if libsafe is found on the system." #: ../../install_interactive.pm:1 #, c-format msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "عثر معالج التجزئة في DrakX على الحلول التالية:" #: ../../keyboard.pm:1 #, c-format msgid "Hungarian" msgstr "المجرية" #: ../../network/isdn.pm:1 #, c-format msgid "" "Select your provider.\n" "If it isn't listed, choose Unlisted." msgstr "" "اختر موفر الخدمة الخاص بك.\n" "ان لم يكن موجوداً في القائمة, اختر غير موجود." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Automatic time synchronization (using NTP)" msgstr "تزامن وقت آلي (باستخدام NTP)" #: ../../network/adsl.pm:1 #, fuzzy, c-format msgid "Use my Windows partition" msgstr "جاري تغيير حجم تجزئة Windows" #: ../../Xconfig/card.pm:1 #, c-format msgid "8 MB" msgstr "8 ميغابايت" #: ../../any.pm:1 #, c-format msgid "LDAP Server" msgstr "خادم LDAP" #: ../../services.pm:1 #, c-format msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It won't get started unless configured so it is safe to " "have\n" "it installed on machines that don't need it." msgstr "" "دعم PCMCIA مهم لدعم أشياء مثل بطاقات الإيثرنت و\n" "المودمات على الأجهزة الدفترية. لن يتم بدء هذه الخدمة الا عند تهيئتها لذا فلا " "مسكلة عند تشغيله\n" "على الأجهزة التي لا تحتاجه." #: ../../network/tools.pm:1 #, c-format msgid "Choose your country" msgstr "إختر بلدك" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- System Files:\n" msgstr "" "\n" "-ملفّات النّظام :\n" #: ../../standalone/drakbug:1 #, c-format msgid "Standalone Tools" msgstr "الأدوات المنفصلة" #: ../../standalone/drakbackup:1 #, c-format msgid "Where" msgstr "أين" #: ../../standalone/logdrake:1 #, c-format msgid "but not matching" msgstr "لكن ليس موائمة" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "Here you can select an alternative driver (either OSS or ALSA) for your " "sound card (%s)." msgstr "يمكنك هنا اختيار مشغل بديل (ALSA أو OSS) لبطاقة الصوت (%s)." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Configuring PCMCIA cards..." msgstr "جاري تهيئة بطاقات PCMCIA..." #: ../../common.pm:1 #, c-format msgid "kdesu missing" msgstr "kdesu missing" #: ../../standalone/drakTermServ:1 #, c-format msgid "%s: %s requires a username...\n" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Encryption key" msgstr "مفاتح التشفير" #: ../../mouse.pm:1 #, c-format msgid "Microsoft IntelliMouse" msgstr "Microsoft IntelliMouse" #: ../../keyboard.pm:1 #, c-format msgid "" "This setting will be activated after the installation.\n" "During installation, you will need to use the Right Control\n" "key to switch between the different keyboard layouts." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Christmas Island" msgstr "جزر الكريسماس" #: ../../mouse.pm:1 #, fuzzy, c-format msgid "Automatic" msgstr "Automatic IP" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Installation of bootloader failed. The following error occured:" msgstr "فشل تثبيت محمّل الإقلاع. ظهر الخطأ التالي:" #: ../../standalone/harddrake2:1 #, c-format msgid "EIDE/SCSI channel" msgstr "قناة EIDE/SCSI" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Set this printer as the default" msgstr "عيّن هذه الطابعة كطابعة افتراضية" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Verify that %s is the correct path" msgstr "هل هذا هو الإعداد الصحيح؟" #: ../../install_interactive.pm:1 #, c-format msgid "partition %s" msgstr "التجزئة %s" #: ../../security/level.pm:1 #, c-format msgid "Paranoid" msgstr "مرتفع جدا" #: ../../any.pm:1 #, c-format msgid "NIS" msgstr "NIS" #: ../../standalone/drakTermServ:1 #, c-format msgid "<-- Del User" msgstr "<-- احذف المستخدم" #: ../../standalone/harddrake2:1 #, c-format msgid "Location on the bus" msgstr "المكان على الـbus" # #: ../../printer/printerdrake.pm:1 #, c-format msgid "No printer found!" msgstr "لا توجد طابعة!" #: ../../standalone/harddrake2:1 #, c-format msgid "the vendor name of the device" msgstr "اسم مصنّع الجهاز" #: ../../help.pm:1 ../../install_interactive.pm:1 #, c-format msgid "Erase entire disk" msgstr "امسح كل القرص" #: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid " (Default)" msgstr " (افتراضي)" #: ../../standalone/drakgw:1 #, c-format msgid "Automatic reconfiguration" msgstr "اعداة تهيئة آلية" #: ../../standalone/net_monitor:1 #, c-format msgid "Receiving Speed:" msgstr "سرعة الإستقبال" #: ../../lang.pm:1 #, c-format msgid "Turks and Caicos Islands" msgstr "جزر الترك و الكايكوس" #: ../../standalone/drakconnect:1 #, c-format msgid "No Ip" msgstr "" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1 #: ../../ugtk2.pm:1 ../../interactive/newt.pm:1 #: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "<- Previous" msgstr "<- السابق " #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Transfer Now" msgstr "" " انقل \n" "الآن" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Set root password and network authentication methods" msgstr "" "Arguments: (arg)\n" "\n" "Use password to authenticate users." #: ../../ugtk2.pm:1 #, c-format msgid "Toggle between flat and group sorted" msgstr "Toggle between flat and group sorted" #: ../../standalone/drakboot:1 #, c-format msgid "Themes" msgstr "السمات" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Options: %s" msgstr "الخيارات: %s" #: ../../standalone/drakboot:1 #, c-format msgid "" "You are currently using %s as your boot manager.\n" "Click on Configure to launch the setup wizard." msgstr "" "أنت تستخدم %s كمدير اقلاع حاليا.\n" "اضغط على تهيئة لتشغيل معالج الإعداد" #: ../../printer/printerdrake.pm:1 #, c-format msgid "OKI winprinter configuration" msgstr "إعداد OKI WinPrinter" #: ../../lang.pm:1 #, c-format msgid "Saint Helena" msgstr "سانت هيلانة" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Parallel port #%s" msgstr " على المنفذ المتوازي #%s" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Security Level" msgstr "مستوى الأمن" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" "بعض الخطوات لم يتم تكملتها.\n" "\n" "هل تريد الخروج الآن فعلاً؟" #: ../../lang.pm:1 #, c-format msgid "Sudan" msgstr "السودان" #: ../../keyboard.pm:1 #, c-format msgid "Polish (qwertz layout)" msgstr "البولندية (qwertz layout)" #: ../../lang.pm:1 #, c-format msgid "Syria" msgstr "سورية" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, " "LaserJet 1100/1200/1220/3200/3300 with scanner, DeskJet 450, Sony IJP-V100), " "an HP PhotoSmart or an HP LaserJet 2200?" msgstr "" "اذا كانت طابعتك جهازاً متعدد الوظائف من HP أو Sony (OfficeJet, PSC, LaserJet " "1100/1200/1220/3200/3300 مع ماسح ضوئي, Sony IPJ-V100) أو جهاز HP PhotoSmart " "أو HP LaserJet 2200؟" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: ../../bootloader.pm:1 #, c-format msgid "" "Welcome to %s the operating system chooser!\n" "\n" "Choose an operating system from the list above or\n" "wait %d seconds for default boot.\n" "\n" msgstr "" "Welcome to %s the operating system chooser!\n" "\n" "Choose an operating system from the list above or\n" "wait %d seconds for default boot.\n" "\n" #: ../../keyboard.pm:1 #, c-format msgid "Portuguese" msgstr "البرتغالية" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Loopback file name: " msgstr "اسم ملف Loopback: " #: ../../network/network.pm:1 #, c-format msgid "DNS server address should be in format 1.2.3.4" msgstr "عنوان خادم DNS يجب أن يكون على النسق 1.2.3.4" #: ../../keyboard.pm:1 #, c-format msgid "Left Control key" msgstr "مفتاح Control الأيسر" #: ../../lang.pm:1 #, c-format msgid "Serbia" msgstr "صربيا" #: ../../standalone/drakxtv:1 #, c-format msgid "Newzealand" msgstr "نيوزيلندا " #: ../../fsedit.pm:1 #, c-format msgid "This directory should remain within the root filesystem" msgstr "هذا الدليل يجب أن يكون في نظام الملفات الجذري" #: ../../standalone/drakbackup:1 #, c-format msgid "Across Network" msgstr "عبر الشّبكة" #: ../../keyboard.pm:1 #, c-format msgid "CapsLock key" msgstr "مفتاح CapsLock" #: ../../steps.pm:1 #, c-format msgid "Install bootloader" msgstr "تثبيت محمِّل الإقلاع" #: ../../Xconfig/card.pm:1 #, c-format msgid "Select the memory size of your graphics card" msgstr "إختر حجم ذاكرة بطاقة الشاشة" #: ../../security/help.pm:1 #, fuzzy, c-format msgid "" "Enable/Disable crontab and at for users.\n" "\n" "Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n" "and crontab(1))." msgstr "" "Arguments: (arg)\n" "\n" "Enable/Disable crontab and at for users. Put allowed users in /etc/cron." "allow and /etc/at.allow\n" "(see man at(1) and crontab(1))." #: ../../standalone.pm:1 #, c-format msgid "" "[OPTIONS]\n" "Network & Internet connection and monitoring application\n" "\n" "--defaultintf interface : show this interface by default\n" "--connect : connect to internet if not already connected\n" "--disconnect : disconnect to internet if already connected\n" "--force : used with (dis)connect : force (dis)connection.\n" "--status : returns 1 if connected 0 otherwise, then exit.\n" "--quiet : don't be interactive. To be used with (dis)connect." msgstr "" "[OPTIONS]\n" "Network & Internet connection and monitoring application\n" "\n" "--defaultintf interface : show this interface by default\n" "--connect : connect to internet if not already connected\n" "--disconnect : disconnect to internet if already connected\n" "--force : used with (dis)connect : force (dis)connection.\n" "--status : returns 1 if connected 0 otherwise, then exit.\n" "--quiet : don't be interactive. To be used with (dis)connect." #: ../../standalone/drakTermServ:1 #, c-format msgid "Dynamic IP Address Pool:" msgstr "Dynamic IP Address Pool:" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "LVM name?" msgstr "اسم LVM؟" #: ../../standalone/service_harddrake:1 #, c-format msgid "Some devices in the \"%s\" hardware class were removed:\n" msgstr "تمت ازالة بعض الأجهزة في فئة العتاد \"%s\":\n" #: ../../modules/interactive.pm:1 #, c-format msgid "Found %s %s interfaces" msgstr "تم ايجاد %s %s واجهات" #: ../../standalone/drakfont:1 #, c-format msgid "Post Install" msgstr "ما بعد التثبيت" #: ../../standalone/drakgw:1 #, c-format msgid "The internal domain name" msgstr "اسم النطاق الداخلي" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IRQ" msgstr "Card IRQ" #: ../../standalone/logdrake:1 #, c-format msgid "logdrake" msgstr "logdrake" #: ../../standalone.pm:1 #, c-format msgid "" "Font Importation and monitoring " "application \n" "--windows_import : import from all available windows partitions.\n" "--xls_fonts : show all fonts that already exist from xls\n" "--strong : strong verification of font.\n" "--install : accept any font file and any directry.\n" "--uninstall : uninstall any font or any directory of font.\n" "--replace : replace all font if already exist\n" "--application : 0 none application.\n" " : 1 all application available supported.\n" " : name_of_application like so for staroffice \n" " : and gs for ghostscript for only this one." msgstr "" "Font Importation and monitoring " "application \n" "--windows_import : import from all available windows partitions.\n" "--xls_fonts : show all fonts that already exist from xls\n" "--strong : strong verification of font.\n" "--install : accept any font file and any directry.\n" "--uninstall : uninstall any font or any directory of font.\n" "--replace : replace all font if already exist\n" "--application : 0 none application.\n" " : 1 all application available supported.\n" " : name_of_application like so for staroffice \n" " : and gs for ghostscript for only this one." #: ../../standalone.pm:1 #, c-format msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" #: ../../any.pm:1 #, c-format msgid "Choose the floppy drive you want to use to make the bootdisk" msgstr "اختر سواقة الأقراص المرنة التي تريد استخدامها لعمل قرص الإقلاع" #: ../../bootloader.pm:1 ../../help.pm:1 #, c-format msgid "LILO with text menu" msgstr "LILO مع قائمة نصية" #: ../../standalone/net_monitor:1 #, c-format msgid "instantaneous" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Everything (no firewall)" msgstr "كل شئ (لا جدار ناري)" #: ../../any.pm:1 #, c-format msgid "You must specify a kernel image" msgstr "يجب أن تحدد صورة النواة" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on USB" msgstr ", جهاز متعدد الوظائف على منفذ USB" #: ../../interactive/newt.pm:1 #, c-format msgid "Do" msgstr "افعل" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Contacting the mirror to get the list of available packages..." msgstr "جاري الإتصال بالمرآة للحصول على قائمة بالحزم المتوفرة..." #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian AZERTY (old)" msgstr "الليتوانية AZERTY (قديم)" #: ../../keyboard.pm:1 #, c-format msgid "Brazilian (ABNT-2)" msgstr "البرازيلية (ABNT-2)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "IP address of host/network:" msgstr "عنوان IP للمستضيف/الشبكة:" #: ../../standalone/draksplash:1 #, c-format msgid "" "the progress bar y coordinate\n" "of its upper left corner" msgstr "" "الإحداثي الصادي للركن الأيسر الأعلى\n" "لشريط التقدم" #: ../../install_gtk.pm:1 #, c-format msgid "System installation" msgstr "تثبيت النظام" #: ../../lang.pm:1 #, c-format msgid "Saint Vincent and the Grenadines" msgstr "سانت فينسنت و الغرينادين" #: ../../security/help.pm:1 #, fuzzy, c-format msgid "Allow/Forbid reboot by the console user." msgstr "" "Arguments: (arg)\n" "\n" "Allow/Forbid reboot by the console user." #: ../../standalone/logdrake:1 #, c-format msgid "/File/_Open" msgstr "/ملف/_فتح" #: ../../standalone/drakpxe:1 #, c-format msgid "Location of auto_install.cfg file" msgstr "المكان على ملف install.cfg" #: ../../any.pm:1 #, c-format msgid "Open Firmware Delay" msgstr "Open Firmware Delay" #: ../../lang.pm:1 #, c-format msgid "Hungary" msgstr "المجر" #: ../../lang.pm:1 #, c-format msgid "New Zealand" msgstr "نيوزيلندا" #: ../../standalone/net_monitor:1 #, c-format msgid "Color configuration" msgstr "إعدادات الألوان" #: ../../security/level.pm:1 #, c-format msgid "" "There are already some restrictions, and more automatic checks are run every " "night." msgstr "" "توجد بعض القيود, كما يتم تشغيل برامج للتأكد من النظام أوتوماتيكياً كل ليلة." #: ../../standalone/drakbackup:1 #, c-format msgid "please choose the date to restore" msgstr "رجاء اختر تاريخ الإستعادة" #: ../../lang.pm:1 #, c-format msgid "Netherlands Antilles" msgstr "أنتيل هولندا" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Switching from ext2 to ext3" msgstr "جاري التغيير من ext2 الى ext3" #: ../../printer/data.pm:1 #, c-format msgid "LPRng" msgstr "LPRng" #: ../../standalone/drakbackup:1 #, c-format msgid "Browse to new restore repository." msgstr "استعرض الى مستودع استعادة جديد." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard allows you to install local or remote printers to be used from " "this machine and also from other machines in the network.\n" "\n" "It asks you for all necessary information to set up the printer and gives " "you access to all available printer drivers, driver options, and printer " "connection types." msgstr "" "\n" "أهلاً بكم في معالج اعداد الطابعات\n" "\n" "هذا المعالج يسمح لك بتثبيت الطابعات المحلية أو البعيدة ليتم استخدامها من هذه " "الماكينو و من الماكينات الأخرى على الشبكة.\n" "\n" "يسألك المعالج عن كل المعلومات الأساسية لإعداد الطابعة و تعطيك القدرة على " "الوصول لكل مشغلات الطابعات و خيارات المشغلات و أنواع وصلات الطابعة." #: ../../printer/printerdrake.pm:1 #, c-format msgid "and %d unknown printers" msgstr "و %d طابعات غير معروفة" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Early Intel Pentium chips manufactured have a bug in their floating point " "processor which did not achieve the required precision when performing a " "Floating point DIVision (FDIV)" msgstr "" "Early Intel Pentium chips manufactured have a bug in their floating point " "processor which did not achieve the required precision when performing a " "Floating point DIVision (FDIV)" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Backup quota exceeded!\n" "%d MB used vs %d MB allocated." msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "No ISDN PCI card found. Please select one on the next screen." msgstr "لم يتم ايجاد بطاقات ISDN PCI. فضلاً اختر واحدة في الشاشة التالية." #: ../../common.pm:1 #, c-format msgid "GB" msgstr "غيغابايت" #: ../../any.pm:1 #, c-format msgid "Please give a user name" msgstr "رجاءً قم بإعطاء اسم مستخدم" #: ../../any.pm:1 #, c-format msgid "Enable CD Boot?" msgstr "تمكين الإقلاع من القرص المدمج؟" #: ../../../move/move.pm:1 #, c-format msgid "Simply reboot" msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid " enter `void' for void entry" msgstr " enter `void' for void entry" #: ../../standalone/drakbackup:1 #, c-format msgid "Backups on unmountable media - Use Catalog to restore" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "January" msgstr "يناير" #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "Password history length" msgstr "كلمة المرور هذه بسيطة جدا" #: ../../network/netconnect.pm:1 #, c-format msgid "Winmodem connection" msgstr "وصلة Winmodem" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Congratulations, your printer is now installed and configured!\n" "\n" "You can print using the \"Print\" command of your application (usually in " "the \"File\" menu).\n" "\n" "If you want to add, remove, or rename a printer, or if you want to change " "the default option settings (paper input tray, printout quality, ...), " "select \"Printer\" in the \"Hardware\" section of the Mandrake Control " "Center." msgstr "" "\n" "تهانينا, تم تثبيت و تهيئة طابعتك!\n" "\n" "يمكنك الطباعة باستخدام أمر \"اطبع\" في تطبيقاتك (عادة في قائمة \"ملف\").\n" "\n" "اذا أردت اضافة أو حذف أو اعادة تسمية طابعة, أة اذا أردت تغيير خيارات الطابعة " "الإفتراضية (جودة الطباعة, تغيير الحبر, ...), اختر \"الطابعة\" في قسم \"العتاد" "\" في مركز تحكم Mandrake." #: ../../standalone/drakxtv:1 #, c-format msgid "Now, you can run xawtv (under X Window!) !\n" msgstr "الآن يمكنك تشغيل XawTV (في الواجهة الرسومية!) !\n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Not enough swap space to fulfill installation, please add some" msgstr "لا توجد مساحة تبديل كافية للقيام بالتثبيت, فضلاً زد مساحة التبديل" #. -PO: example: lilo-graphic on /dev/hda1 #: ../../install_steps_interactive.pm:1 #, c-format msgid "%s on %s" msgstr "%s على %s" #: ../../security/help.pm:1 #, fuzzy, c-format msgid "Allow/Forbid remote root login." msgstr "" "Arguments: (arg)\n" "\n" "Allow/Forbid remote root login." #: ../../help.pm:1 #, c-format msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n" "local time according to the time zone you selected. If the clock on your\n" "motherboard is set to local time, you may deactivate this by unselecting\n" "\"%s\", which will let GNU/Linux know that the system clock and the\n" "hardware clock are in the same timezone. This is useful when the machine\n" "also hosts another operating system like Windows.\n" "\n" "The \"%s\" option will automatically regulate the clock by connecting to a\n" "remote time server on the Internet. For this feature to work, you must have\n" "a working Internet connection. It is best to choose a time server located\n" "near you. This option actually installs a time server that can used by\n" "other machines on your local network as well." msgstr "" "يقوم Linux بإدارة الوقت حسب توقيت غرينتش ثم يترجمه الى\n" "التوقيت المحلي حسب المنطقة الزمنية التي اخترتها. اذا كانت الساعة\n" "التي في اللوحة الرئيسية مضبوطة على التوقيت المحلي, يمكنك ازالة تنشيط ذلك\n" "عن طريق ازالة التأشير من \"%s\" و التي ستجعل\n" "Linux يعلم أن ساعة النظام و ساعة الجهاز على نفس التوقيت. هذا\n" "مفيد عندما تستضيف الماكينة نظام تشغيل آخر مثل Windows.\n" "\n" "خيار \"%s\" سيقوم آلياً بضبط الساعة عن طريق\n" "الإتصال بخادم وقت بعيد على الإنترنت. كي تعمل هذه الميزة,\n" "يجب أن تكون لديك وصلة انترنت عاملة. من الأفضل اختيار خادم\n" "الوقت الأقرب اليك. هذا الخيار يثبت خادم وقت\n" "يمكن استخدامه عن طريق الماكينات الأخرى على الشبكة المحلية." #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Can't create log file!" msgstr "تعذر انشاء الكتالوغ!" #: ../../install_steps_interactive.pm:1 ../../standalone/drakclock:1 #, c-format msgid "Which is your timezone?" msgstr "ما هي منطقتك الزمنية؟" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Use .backupignore files" msgstr "استخدم quota لملفات النسخ الإحتياطي." #: ../../lang.pm:1 #, c-format msgid "Guinea" msgstr "غينيا" #: ../../network/tools.pm:1 #, c-format msgid "The system is now connected to the Internet." msgstr "النظام الآن متصل بالإنترنت" #: ../../lang.pm:1 #, c-format msgid "South Georgia and the South Sandwich Islands" msgstr "جوجيا الجنوبية و جزر ساندويتش الجنوبية" #: ../../standalone/drakxtv:1 #, c-format msgid "Japan (broadcast)" msgstr "اليابان (broadcast)" #: ../../help.pm:1 #, c-format msgid "" "Monitor\n" "\n" " The installer will normally automatically detect and configure the\n" "monitor connected to your machine. If it is incorrect, you can choose from\n" "this list the monitor you actually have connected to your computer." msgstr "" "الشاشة\n" "\n" " يمكن لبرنامج التثبيت اكتشاف و تهيئة الشاشة المتصلة بماكينتك\n" "آلياً. ان لم يصل ذلك, يمكنك اختيار الشاشة التي لديك\n" "من القائمة." #: ../../lang.pm:1 #, c-format msgid "Mozambique" msgstr "موزمبيق" #: ../../any.pm:1 #, c-format msgid "Icon" msgstr "أيقونة" #: ../../../move/tree/mdk_totem:1 #, fuzzy, c-format msgid "Kill those programs" msgstr "الوصول الى برامج X" #: ../../standalone/drakbackup:1 #, c-format msgid "Please choose what you want to backup" msgstr "رجاء اختر ما تريد نسخه احتياطياً" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "256 colors (8 bits)" msgstr "256 لون (8 بت)" #: ../../any.pm:1 #, c-format msgid "Read-write" msgstr "للقراءة و الكتابة" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Size: %s\n" msgstr "الحجم: %s\n" #: ../../standalone/drakconnect:1 #, c-format msgid "Hostname: " msgstr "اسم المستضيف :" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Add a rule" msgstr "اضافة قاعدة" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Chunk size %s\n" msgstr "حجم Chunk %s\n" #: ../advertising/02-community.pl:1 #, c-format msgid "Build the future of Linux!" msgstr "شارك في بناء مستقبل Linux!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Local Printer" msgstr "طابعة محلية" #: ../../network/tools.pm:1 #, fuzzy, c-format msgid "Floppy access error, unable to mount device %s" msgstr "أين تريد تحميل الجهاز %s؟" #: ../../standalone.pm:1 #, c-format msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" #: ../../network/netconnect.pm:1 #, c-format msgid "ADSL connection" msgstr "وصلة ADSL" #: ../../standalone/drakbackup:1 #, c-format msgid "No configuration, please click Wizard or Advanced.\n" msgstr "لا تهيئة, اضغط معالج أو متقدم.\n" #: ../../standalone/drakautoinst:1 #, c-format msgid "Error!" msgstr "خطأ ! " #: ../../network/netconnect.pm:1 #, c-format msgid "cable connection detected" msgstr "تم اكتشاف وصلة كيبل" #: ../../standalone/drakbackup:1 #, c-format msgid "Permission denied transferring %s to %s" msgstr "تم رفض لاتصريح بنقل %s الى %s" #: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 #, c-format msgid "/_Report Bug" msgstr "/_تقرير خطأ" #: ../../lang.pm:1 #, c-format msgid "Dominica" msgstr "دومينيكا" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Resize" msgstr "تغيير الحجم" #: ../../Xconfig/various.pm:1 #, c-format msgid "Resolution: %s\n" msgstr "دقة العرض: %s\n" #: ../../install2.pm:1 #, c-format msgid "" "Can't access kernel modules corresponding to your kernel (file %s is " "missing), this generally means your boot floppy in not in sync with the " "Installation medium (please create a newer boot floppy)" msgstr "" "تعذر الوصول الى وحدات النواة الخاصة بنواة النظام (الملف %s مفقود), بشكل عام " "يعني هذا أن قرص الإقلاع المرن ليس محدّثاً مع وسيط التثبيت (فضلاً قم بإنشاء قرص " "اقلاع جديد)" #: ../../help.pm:1 #, c-format msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." msgstr "" "فضلاً اختر المنفذ الصحيح. مثلاً لمنفذ \"COM1\" في\n" "Windows اسمه \"ttys0\" في Linux." #: ../../install_steps_gtk.pm:1 #, c-format msgid "The following packages are going to be removed" msgstr "سيتم حذف الحزم التالية" #: ../../network/adsl.pm:1 ../../network/ethernet.pm:1 #, c-format msgid "Connect to the Internet" msgstr "وصّل إلى الإنترنت " #: ../../install_interactive.pm:1 #, c-format msgid "Use existing partitions" msgstr "استخدم التجزئات الموجودة" #: ../../keyboard.pm:1 #, c-format msgid "Canadian (Quebec)" msgstr "الكنديّة (كيبيك)" #: ../../Xconfig/various.pm:1 #, c-format msgid "Mouse device: %s\n" msgstr "جهاز الفأرة: %s\n" #: ../../standalone/drakfont:1 #, c-format msgid "Reselect correct fonts" msgstr "أعد اختيار الخطوط الصحيحة" #: ../../help.pm:1 #, c-format msgid "" "Options\n" "\n" " Here you can choose whether you want to have your machine automatically\n" "switch to a graphical interface at boot. Obviously, you want to check\n" "\"%s\" if your machine is to act as a server, or if you were not successful\n" "in getting the display configured." msgstr "" "في النهاية, سيتم سؤالك عن اذا كنت تريد بدء الواجهة الرسومية\n" "عند بدء النظام. لاحط أنه سيتم سؤالك هذا السؤال حتى لو اخترت عدم اختبار\n" "التهيئة, بكل وضوح, ستختار \"%s\" اذا كانت ماكينتك ستستخدم كجهاز\n" "خادم, أو اذا لم تنجح في تهيئة العرض\n" "بشكل صحيح." #: ../advertising/13-mdkexpert_corporate.pl:1 #, c-format msgid "MandrakeExpert Corporate" msgstr "MandrakeExpert للشركات" #: ../../standalone.pm:1 #, c-format msgid "" " [everything]\n" " XFdrake [--noauto] monitor\n" " XFdrake resolution" msgstr "" " [everything]\n" " XFdrake [--noauto] monitor\n" " XFdrake resolution" #: ../../standalone/harddrake2:1 #, c-format msgid "Write protection" msgstr "الحماية من الكتابة" #: ../../standalone/drakfont:1 #, c-format msgid "You've not selected any font" msgstr "لم تقم باختيار أي خط" #: ../../steps.pm:1 #, c-format msgid "Language" msgstr "اختر لغتك" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer model selection" msgstr "إختيار وحدات الطابعة" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "بعد تغيير نوع التجزئة %s, فإنك ستسخر كل البيانات على التجزئة" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "ISDN adapters" msgstr "بطاقة ISDN" #: ../../common.pm:1 #, c-format msgid "%d seconds" msgstr "%d ثوان" #: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "أدخل قرص مرن فارغ في السواقة %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "A valid URI must be entered!" msgstr "يجب ادخال URI صالح!" #: ../../network/isdn.pm:1 #, c-format msgid "Found \"%s\" interface do you want to use it ?" msgstr "تم ايجاد الواجهة \"%s\" هل تريد استخدامها؟" #: ../../standalone/drakgw:1 #, c-format msgid "Re-configure interface and DHCP server" msgstr "إعادة إعداد الواجهة و خادم DHCP" #: ../../harddrake/sound.pm:1 #, c-format msgid "Sound configuration" msgstr "اعدادات الصوت" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Photo test page" msgstr "صفحة اختبارية لصورة" #: ../../help.pm:1 ../../install_interactive.pm:1 #, c-format msgid "Custom disk partitioning" msgstr "تجزئة مخصصة" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Enter Printer Name and Comments" msgstr "أدخل اسم الطابعة و التعليقات" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The following printers\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "" "الطابعات التالية\n" "\n" "%s%s\n" "متصلة مباشرةً بنظامك" #: ../../network/modem.pm:1 #, c-format msgid "You don't have any winmodem" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "type: %s" msgstr "النوع: %s" #: ../../keyboard.pm:1 #, c-format msgid "Slovakian (QWERTY)" msgstr "السلوفاكية (QWERTY)" #: ../../standalone/drakbackup:1 #, c-format msgid "" "This should be a comma-separated list of local users or email addresses that " "you want the backup results sent to. You will need a functioning mail " "transfer agent setup on your system." msgstr "" #: ../../standalone/draksound:1 #, c-format msgid "No Sound Card detected!" msgstr "لم يتم اختيار بطاقة صوت" #: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1 #, c-format msgid "Mouse Port" msgstr "منفذ الفأرة" #: ../../security/l10n.pm:1 #, c-format msgid "Check for unsecured accounts" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "Need to restart the Display Manager for full changes to take effect. \n" "(service dm restart - at the console)" msgstr "" "يجب اعادة تشغيل مدير العرض لكي يتم تفعيل التغييرات. \n" "(service dm restart - في سطر الأوامر)" #: ../../standalone/logdrake:1 #, c-format msgid "Ftp Server" msgstr "الخادم FTP" #: ../../lang.pm:1 #, c-format msgid "Uganda" msgstr "أوغندا" #: ../../standalone/drakfont:1 #, c-format msgid "%s fonts conversion" msgstr "تحويل خطوط %s" #: ../../standalone/harddrake2:1 #, c-format msgid "the type of bus on which the mouse is connected" msgstr "نوع الـbus المرتبطة به الفأرة" #: ../../help.pm:1 #, c-format msgid "" "As a review, DrakX will present a summary of information it has about your\n" "system. Depending on your installed hardware, you may have some or all of\n" "the following entries. Each entry is made up of the configuration item to\n" "be configured, followed by a quick summary of the current configuration.\n" "Click on the corresponding \"%s\" button to change that.\n" "\n" " * \"%s\": check the current keyboard map configuration and change that if\n" "necessary.\n" "\n" " * \"%s\": check the current country selection. If you are not in this\n" "country, click on the \"%s\" button and choose another one. If your country\n" "is not in the first list shown, click the \"%s\" button to get the complete\n" "country list.\n" "\n" " * \"%s\": By default, DrakX deduces your time zone based on the country\n" "you have chosen. You can click on the \"%s\" button here if this is not\n" "correct.\n" "\n" " * \"%s\": check the current mouse configuration and click on the button to\n" "change it if necessary.\n" "\n" " * \"%s\": clicking on the \"%s\" button will open the printer\n" "configuration wizard. Consult the corresponding chapter of the ``Starter\n" "Guide'' for more information on how to setup a new printer. The interface\n" "presented there is similar to the one used during installation.\n" "\n" " * \"%s\": if a sound card is detected on your system, it is displayed\n" "here. If you notice the sound card displayed is not the one that is\n" "actually present on your system, you can click on the button and choose\n" "another driver.\n" "\n" " * \"%s\": by default, DrakX configures your graphical interface in\n" "\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n" "\"%s\" to reconfigure your graphical interface.\n" "\n" " * \"%s\": if a TV card is detected on your system, it is displayed here.\n" "If you have a TV card and it is not detected, click on \"%s\" to try to\n" "configure it manually.\n" "\n" " * \"%s\": if an ISDN card is detected on your system, it will be displayed\n" "here. You can click on \"%s\" to change the parameters associated with the\n" "card.\n" "\n" " * \"%s\": If you want to configure your Internet or local network access\n" "now.\n" "\n" " * \"%s\": this entry allows you to redefine the security level as set in a\n" "previous step ().\n" "\n" " * \"%s\": if you plan to connect your machine to the Internet, it's a good\n" "idea to protect yourself from intrusions by setting up a firewall. Consult\n" "the corresponding section of the ``Starter Guide'' for details about\n" "firewall settings.\n" "\n" " * \"%s\": if you wish to change your bootloader configuration, click that\n" "button. This should be reserved to advanced users.\n" "\n" " * \"%s\": here you'll be able to fine control which services will be run\n" "on your machine. If you plan to use this machine as a server it's a good\n" "idea to review this setup." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Comoros" msgstr "جزر القمر" #: ../../standalone/drakbackup:1 #, c-format msgid "May" msgstr "مايو" #: ../../standalone/drakboot:1 #, c-format msgid "Yaboot mode" msgstr "وضع Yaboot" #: ../../mouse.pm:1 #, c-format msgid "Generic 3 Button Mouse" msgstr "Generic 3 Button Mouse" #: ../../standalone/drakxtv:1 #, c-format msgid "USA (cable)" msgstr "الولايات المتّحدة الأمريكيّة (cable)" #: ../../standalone/drakboot:1 #, c-format msgid "" "Can't relaunch LiLo!\n" "Launch \"lilo\" as root in command line to complete LiLo theme installation." msgstr "" "تعذرت اعادة تشغيل LiLo!\n" "شغّل \"lilo\" كمستخدم جذر في سطر الأوامر و أكمل تثبيت سمات LiLo." #: ../../standalone/drakbackup:1 #, c-format msgid "Select another media to restore from" msgstr "اختر وسيط آخر للاستعادة منه" #: ../../standalone/drakbug:1 #, c-format msgid "Software Manager" msgstr "مدير البرامج" #: ../../interactive/stdio.pm:1 #, c-format msgid "Re-submit" msgstr "إعادة تسليم" #: ../../standalone/drakbackup:1 #, c-format msgid "CD in place - continue." msgstr "القرص في المكان الصحيح - تابع" #: ../../common.pm:1 #, c-format msgid "KB" msgstr "كيلوبايت" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Network & Internet" msgstr "الشبكة و الإنترنت" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian \"phonetic\" QWERTY" msgstr "الليتوانية \"صوتي\" QWERTY" #: ../../standalone/drakTermServ:1 #, c-format msgid "Net Boot Images" msgstr "صور اقلاع الشبكة" #: ../../standalone/scannerdrake:1 #, c-format msgid "Sharing of local scanners" msgstr "مشاركة الماسحات الضوئية المحلية" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Plug'n Play probing failed. Please select the correct monitor" msgstr "تعذر التأكد من وجود Plug 'n Play. فضلاً اختر الشاشة الصحيحة" #: ../../../move/move.pm:1 #, c-format msgid "Detect again USB key" msgstr "" #: ../../services.pm:1 #, c-format msgid "Services and deamons" msgstr "الخدمات و المراقبات" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote host name missing!" msgstr "اسم المستضيف البعيد مفقود!" #: ../../fsedit.pm:1 #, c-format msgid "with /usr" msgstr "مع /usr" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../standalone/drakbackup:1 #, c-format msgid "Network" msgstr "الشبكة" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detect printers connected to machines running Microsoft Windows" msgstr "تحقّق آلياً من الطابعات الموصولة بماكينات تعمل على Microsoft Windows" #: ../../any.pm:1 #, c-format msgid "This password is too simple" msgstr "كلمة المرور هذه بسيطة جدا" #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "Chkconfig obey msec rules" msgstr "تهيئة الخدمات" #: ../../keyboard.pm:1 #, c-format msgid "Slovakian (QWERTZ)" msgstr "السلوفاكية (QWERTZ)" #: ../advertising/06-development.pl:1 #, c-format msgid "" "To modify and to create in different languages such as Perl, Python, C and C+" "+ has never been so easy thanks to GNU gcc 3 and the best Open Source " "development environments." msgstr "" "تعديل و انشاء البرامج بلغات مختلفة مثل Perl, Python, C و ++ِِC أسهل من ذي قبل " "بفضل GNU gcc 3 و أفضل بيئات التطوير مفتوحة المصدر." # #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "No devices found" msgstr "تعذر ايجاد صورة" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Truly minimal install (especially no urpmi)" msgstr "تثبيت مصغّر فعلاً (خصوصاً بدون urpmi)" #: ../../standalone/drakbackup:1 #, c-format msgid "Use daemon" msgstr "استخدم المراقب" #: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1 #: ../../standalone/drakauth:1 ../../standalone/drakconnect:1 #: ../../standalone/logdrake:1 #, c-format msgid "Authentication" msgstr "التحقق" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Add this printer to Star Office/OpenOffice.org/GIMP" msgstr "أضف هذه الطابعة الى Star Office/OpenOffice.org/GIMP" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Additional CUPS servers: " msgstr "خادمات CUPS الإضافية: " #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Choose one of the auto-detected printers from the list or enter the hostname " "or IP and the optional port number (default is 9100) in the input fields." msgstr "" "اختر واحدة من الطابعات التي تم التحقق منها آلياً من القائمة أو أدخل اسم " "المستضيف أو رقم IP و رقم المنفذ الإختياري (الإفتراضي هو 9100) في حقول " "الإدخال." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Where do you want to mount %s?" msgstr "أين تريد تحميل الجهاز %s؟" #: ../../lang.pm:1 #, c-format msgid "Algeria" msgstr "الجزائر" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Via Network" msgstr "استعادة عن طريق الشبكة" #: ../../standalone/drakbackup:1 #, c-format msgid "Use tar and bzip2 (rather than tar and gzip)" msgstr "" #: ../../any.pm:1 #, c-format msgid "Initrd-size" msgstr "حجم Initrd" #: ../../help.pm:1 #, c-format msgid "" "In the case that different servers are available for your card, with or\n" "without 3D acceleration, you are then asked to choose the server that best\n" "suits your needs." msgstr "" "اذا كانت هناك خادمات مختلفة للبطاقة الخاصة بك, مع أو\n" "دون تسريع للرسوم ثلاثية الأبعاد, يمكنك اختيار الخادم الذي\n" "يناسب احتياجاتك." #: ../../standalone/drakbackup:1 #, c-format msgid "\tBackups use tar and gzip\n" msgstr "\tالنسخ الإحتياطية تستخدم tar و gzip\n" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Set as default" msgstr "المرجع" #: ../../Xconfig/card.pm:1 #, c-format msgid "2 MB" msgstr "2 ميغابايت" #: ../../printer/main.pm:1 ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Configured on this machine" msgstr "(على هذا الجهاز)" #: ../../keyboard.pm:1 #, c-format msgid "Both Control keys simultaneously" msgstr "مفتاحيّ Control في نفس الوقت" #: ../../standalone/drakhelp:1 #, c-format msgid " --help - display this help \n" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTION]...\n" " --no-confirmation don't ask first confirmation question in " "MandrakeUpdate mode\n" " --no-verify-rpm don't verify packages signatures\n" " --changelog-first display changelog before filelist in the " "description window\n" " --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" msgstr "" "[OPTION]...\n" " --no-confirmation don't ask first confirmation question in " "MandrakeUpdate mode\n" " --no-verify-rpm don't verify packages signatures\n" " --changelog-first display changelog before filelist in the " "description window\n" " --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Setting Default Printer..." msgstr "جاري تعيين الطابعة الإفتراضية..." #: ../../standalone/drakgw:1 #, c-format msgid "Interface %s (using module %s)" msgstr "الواجهة %s (باستخدام الوحدة %s)" #: ../../standalone/draksplash:1 #, c-format msgid "Generating preview ..." msgstr "جاري توليد المعاينة ..." #: ../../network/network.pm:1 #, c-format msgid "" "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz " "frequency), or add enough '0' (zeroes)." msgstr "" "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz " "frequency), or add enough '0' (zeroes)." #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "ignore" msgstr "سنغافورة" #: ../../security/help.pm:1 #, fuzzy, c-format msgid "" "Allow/Forbid X connections:\n" "\n" "- ALL (all connections are allowed),\n" "\n" "- LOCAL (only connection from local machine),\n" "\n" "- NONE (no connection)." msgstr "" "Arguments: (arg, listen_tcp=None)\n" "\n" "Allow/Forbid X connections. First arg specifies what is done\n" "on the client side: ALL (all connections are allowed), LOCAL (only\n" "local connection) and NONE (no connection)." #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on parallel port #%s" msgstr ", جهاز متعدد الوظائف على المنفذ المتوازي #%s" #: ../../mouse.pm:1 #, c-format msgid "serial" msgstr "serial" #: ../../harddrake/data.pm:1 #, c-format msgid "DVD-ROM" msgstr "DVD-ROM" #: ../../keyboard.pm:1 #, c-format msgid "Georgian (\"Latin\" layout)" msgstr "الجورجيةّ (التصميم اللاتيني)" #: ../advertising/09-mdksecure.pl:1 #, c-format msgid "Get the best items with Mandrake Linux Strategic partners" msgstr "احصل على الأفضل من شركاء Mandrake Linux" #: ../../modules/interactive.pm:1 #, c-format msgid "" "You may now provide options to module %s.\n" "Note that any address should be entered with the prefix 0x like '0x123'" msgstr "" "يمكنك الآن اعطاء الخيارات للوحدة %s.\n" "لاحظ أن أي عنوان يجب ادخاله مسبوقاً بـ 0x مثل '0x123'" #: ../../lang.pm:1 #, c-format msgid "Kenya" msgstr "كينيا" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Use ``Unmount'' first" msgstr "استخدم ``ازالة التحميل'' أولا" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing mtools packages..." msgstr "جاري تثبيت حزم mtools" #: ../../any.pm:1 #, c-format msgid "You must specify a root partition" msgstr "يجب عليك تحديد تقسيم جذر" #: ../../standalone/draksplash:1 #, c-format msgid "first step creation" msgstr "انشاء الخطوة الأولى" #: ../../keyboard.pm:1 #, c-format msgid "Both Shift keys simultaneously" msgstr "مفتاحيّ Shift في نفس الوقت" #: ../../standalone/drakhelp:1 #, c-format msgid "" " --id - load the html help page which refers to id_label\n" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Select a scanner model" msgstr "اختر طراز الماسح الضوئي" #: ../../security/help.pm:1 #, fuzzy, c-format msgid "Accept/Refuse bogus IPv4 error messages." msgstr "" "Arguments: (arg)\n" "\n" "Accept/Refuse bogus IPv4 error messages." #: ../../printer/data.pm:1 #, c-format msgid "LPRng - LPR New Generation" msgstr "LPRng - LPR New Generation" #: ../../standalone/drakbackup:1 #, c-format msgid "Drakbackup Configuration" msgstr "إعدادات Drakbackup" #: ../../standalone/logdrake:1 #, c-format msgid "Save as.." msgstr "حفظ بإسم.." #: ../../lang.pm:1 #, c-format msgid "Korea (North)" msgstr "كوريا الشمالية" #: ../../standalone/drakconnect:1 #, c-format msgid "" "This interface has not been configured yet.\n" "Launch the configuration wizard in the main window" msgstr "" "لم يتم تهيئة الواجهة بعد.\n" "قم بتشغيل معالج التهيئة في النافذة الرئيسية" #: ../../install_gtk.pm:1 #, c-format msgid "System configuration" msgstr "تهيئة النظام" #: ../../any.pm:1 ../../security/l10n.pm:1 #, c-format msgid "Autologin" msgstr "دخول آلي" #: ../../any.pm:1 #, c-format msgid "Domain Admin Password" msgstr "كلمة المرور لمدير النطاق" #: ../advertising/05-desktop.pl:1 #, c-format msgid "" "Perfectly adapt your computer to your needs thanks to the 11 available " "Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME " "2.2, Window Maker, ..." msgstr "" "اجعل حاسبك يخدم حاجاتك بامتيار بفضل 11 واجهة مستخدم متوفرة لLinux قابلة " "للتخصيص:KDE 3.1, GNOME 2.2, Window Maker, ..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Configuring printer ..." msgstr "جاري إعداد الطابعة ..." #: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "" "To ensure data integrity after resizing the partition(s), \n" "filesystem checks will be run on your next boot into Windows(TM)" msgstr "" "للتأكد من صحة البيانات بعد اعادة تحجيم التجزئات, \n" "سيتم الدقيق على نظام الملفات عند التشغيل القادم لـ Windows(TM)" #: ../../common.pm:1 #, c-format msgid "MB" msgstr "ميغابايت" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, run some checks against the rpm database." msgstr "if set to yes, run some checks against the rpm database." #: ../../lang.pm:1 #, c-format msgid "Virgin Islands (British)" msgstr "الجزر العذراء (بريطانيا)" #: ../../lang.pm:1 #, c-format msgid "Bermuda" msgstr "برمودا" #: ../../standalone/drakfont:1 #, c-format msgid "click here if you are sure." msgstr "اضغط هنا إذا كنت متأكدا." #: ../../standalone/drakbackup:1 #, c-format msgid "" "No configuration file found \n" "please click Wizard or Advanced." msgstr "" "لم يتم ايجاد ملف تهيئة \n" "فضلا اضغط معالج لأو متقدم." #: ../../help.pm:1 #, c-format msgid "" "Listed here are the existing Linux partitions detected on your hard drive.\n" "You can keep the choices made by the wizard, since they are good for most\n" "common installations. If you make any changes, you must at least define a\n" "root partition (\"/\"). Do not choose too small a partition or you will not\n" "be able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a \"/home\" partition\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." msgstr "" "في الأعلى ستجد تقسيمات Linux الموجودة و التي تم ايجادها على القرص الصلب " "الخاص بك.\n" "يمكنك أن تُبقي إختيارات المعالج, و هي جيدة لأغلب أنواع التثبيت.\n" "إذا قمت بعمل أي تغييرات فيجب عليك أن تعرف التقسيم الجذر (\"/\"). لا تختر\n" "تقسيمات ضغيرة جدا و إلا لن تستطيع تثبيت برامج كافية. إذا كنت تريد تخزين " "البيانات\n" "على تقسيم مستقل فستحتاج الى عمل تقسيم لـ\"/home\"\n" "(ممكن فقط إذا كان لديك أكثر من تقسيم لLinux).\n" "\n" "كل تقسيم مُعطى بالسكل التالي: \"الإسم\", \"السعة\".\n" "\n" "\"الإسم\" مركب بالسكل التالي: \"نوع القرص الصلب\", \"رقم القرص الصلب\",\n" "\"رقم التقسيم\" (مثلا, \"hda1\").\n" "\n" "\"رقم القرص الصلب\" دائما هو حرف بعد \"hd\" أو \"sd\". بالنسبة للأقراص " "الصلبة\n" "من نوع IDE فإن:\n" " * \"a\" تعني \"القرص الصلب الأساسي على متحكم IDE الأساسي\",\n" "\n" " * \"b\" تعني \"القرص الصلب الثانوي على متحكم IDE الأساسي\",\n" "\n" " * \"c\" تعني \"القرص الصلب الأساسي على متحكم IDE الثانوي\",\n" "\n" " * \"d\" تعني \"القرص الصلب الثانوي على متحكم IDE الثانوي\",\n" "\n" "أما بالنسبة لأقراص سكزي SCSI فالحرف \"a\" يعني \"أقل معرف SCSI\", و الحرف \"b" "\"\n" "يعني \"ثاني أقل معرف SCSI\", الخ." #: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 #, c-format msgid "Remove" msgstr "احذف" #: ../../lang.pm:1 #, c-format msgid "Lesotho" msgstr "ليسوتو" #: ../../ugtk2.pm:1 #, c-format msgid "utopia 25" msgstr "utopia 25" #: ../../printer/main.pm:1 #, c-format msgid "Pipe job into a command" msgstr "حوّل الوظيفة الى الأمر" #: ../../../move/move.pm:1 #, fuzzy, c-format msgid "Remove system config files" msgstr "هل تريد ازالة ملف loopback؟" #: ../../lang.pm:1 #, c-format msgid "Cote d'Ivoire" msgstr "كوت ديفوار" #: ../../standalone/harddrake2:1 #, c-format msgid "new dynamic device name generated by core kernel devfs" msgstr "اس مالجهاز الديناميكي الجديد الذي يتم توليده من devfs" #: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1 #: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 #: ../../standalone/drakclock:1 ../../standalone/drakgw:1 #: ../../standalone/harddrake2:1 #, c-format msgid "Yes" msgstr "نعم" #: ../../network/isdn.pm:1 #, c-format msgid "Which protocol do you want to use?" msgstr "ما هو البروتوكول الذي تريد استخدامه؟" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Progress" msgstr "تقدم الإستعادة" #: ../../lang.pm:1 #, c-format msgid "Estonia" msgstr "استونيا" #: ../../partition_table.pm:1 #, c-format msgid "" "You have a hole in your partition table but I can't use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions." msgstr "" "توجد مساحة فارغة في جدول التجزئات لديك لكني لا أستطيع استخدامها.\n" "الحل الوحيد هو أن تنقل التجزئات الأساسية لتحصل على المساحة بين التجزئات " "الممتدة." #: ../../standalone/scannerdrake:1 #, c-format msgid "Choose the host on which the local scanners should be made available:" msgstr "اختر المستضيف التي يجب أن تتوفر له الماسحات الضوئية المحلية:" #: ../../standalone/harddrake2:1 #, c-format msgid "Channel" msgstr "القناة" #: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 #: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 #, c-format msgid "Add" msgstr "اضافة" #: ../../standalone/drakbackup:1 #, c-format msgid " Error while sending mail. \n" msgstr " خطأ أثناء ارسال البريد. \n" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../standalone/keyboarddrake:1 #, c-format msgid "Keyboard" msgstr "لوحة المفاتيح" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Insert the CD with volume label %s\n" " in the CD drive under mount point /mnt/cdrom" msgstr "" "أدخل القرص المدمج بالعلامة %s\n" " في سواقة القرص المدمج تحت نقطة التحميل /mnt/cdrom" #: ../../network/network.pm:1 #, c-format msgid "" "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add " "enough '0' (zeroes)." msgstr "" "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add " "enough '0' (zeroes)." #: ../../network/netconnect.pm:1 #, c-format msgid "Choose the connection you want to configure" msgstr "اختر الوصلة التي تريد تهيئتها" #: ../../standalone/draksec:1 #, c-format msgid "Please wait, setting security level..." msgstr "انتظر من فضلك, جاري تعيين مستوى الأمن.." #: ../../network/network.pm:1 #, c-format msgid "Configuring network device %s" msgstr "جاري تهيئة جهاز الشبكة %s" #: ../../install_steps_interactive.pm:1 #, c-format msgid "activated" msgstr "منشّط" #: ../../standalone/drakpxe:1 #, c-format msgid "Please choose which network interface will be used for the dhcp server." msgstr "اختر واجهة الشبكة التي سيتم استخدامها لخادم DHCP." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Finding packages to upgrade..." msgstr "جاري البحث عن الحزم التي ستتم ترقيتها..." #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Mount point: " msgstr "نقطة التحميل: " #: ../../standalone/drakfont:1 #, c-format msgid "parse all fonts" msgstr "تحليل كل الخطوط" #: ../../security/help.pm:1 #, fuzzy, c-format msgid "Allow/Forbid direct root login." msgstr "" "Arguments: (arg)\n" "\n" "Allow/Forbid direct root login." #: ../../security/help.pm:1 #, fuzzy, c-format msgid " Accept/Refuse broadcasted icmp echo." msgstr "" "Arguments: (arg)\n" "\n" " Accept/Refuse broadcasted icmp echo." #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "With X" msgstr "مع X" #: ../../Xconfig/card.pm:1 #, c-format msgid "Multi-head configuration" msgstr "إعداد متعدد الرؤوس" #: ../../standalone/drakbug:1 #, c-format msgid "No browser available! Please install one" msgstr "لا يوجد متصفح متوفر! فضلاً قم بتثبيت متصفح" #: ../../Xconfig/main.pm:1 #, c-format msgid "" "Keep the changes?\n" "The current configuration is:\n" "\n" "%s" msgstr "" "هل تريد حفظ التغييرات؟\n" "الإعداد الحالي هو:\n" "\n" "%s" #: ../../fsedit.pm:1 #, c-format msgid "You can't use ReiserFS for partitions smaller than 32MB" msgstr "لا يمكنك استخدام ReiserFS للتجزئات أصغر من 32 ميغابايت" #: ../../services.pm:1 #, c-format msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similiar to finger)." msgstr "" "بروتوكول rwho يسمح للمستخدمين البعيدين بالحصول على قائمة بكل المستخدمين\n" "الذين سجلوا الدخول الى جهاز يشغّل مراقب rwho (مماثل لـ finger)." #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Domain name" msgstr "اسم النطاق" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Sharing of local printers" msgstr "مشاركة الطابعات المحلية" #: ../../security/help.pm:1 #, fuzzy, c-format msgid "Enable/Disable libsafe if libsafe is found on the system." msgstr "" "Arguments: (arg)\n" "\n" "Enable/Disable libsafe if libsafe is found on the system." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Available printers" msgstr "الطابعات المتوفرة" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "NO" msgstr "INFO" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Empty" msgstr "فارغ" #: ../../standalone/draksplash:1 #, c-format msgid "text width" msgstr "عرض النص" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Where do you want to mount device %s?" msgstr "أين تريد تحميل الجهاز %s؟" #: ../../standalone/drakgw:1 #, c-format msgid "The default lease (in seconds)" msgstr "الإيجار الإفتراضي (بالثواني)" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "" "We are now going to configure the %s connection.\n" "\n" "\n" "Press \"%s\" to continue." msgstr "" "\n" "\n" "\n" "نحن الآن سنقوم بتهيئة الوصلة %s.\n" "\n" "اضغط موافق للمتابعة." #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Interface \"%s\"" msgstr "الواجهة \"%s\"" #: ../../install_steps_interactive.pm:1 #, c-format msgid "With basic documentation (recommended!)" msgstr "مع وثائق المساعدة الأساسية (مفضّل)" #: ../../mouse.pm:1 #, c-format msgid "1 button" msgstr "زر واحد" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "There are %d unknown printers directly connected to your system" msgstr "" "\n" "توجد %d طابعات غير معروفة متصلة مباشرةً بنظامك" #: ../../Xconfig/main.pm:1 #, c-format msgid "Test" msgstr "اختبار" #: ../../lang.pm:1 #, c-format msgid "Korea" msgstr "كوريا" #: ../../interactive/stdio.pm:1 #, c-format msgid "Your choice? (default `%s'%s) " msgstr "Your choice? (default `%s'%s) " #: ../../printer/printerdrake.pm:1 #, c-format msgid "Raw printer" msgstr "طابعة خام" #: ../../standalone/harddrake2:1 #, c-format msgid "official vendor name of the cpu" msgstr "الإسم الرسمي لمصنّع المعالج" #: ../../standalone/drakTermServ:1 #, c-format msgid "Useless without Terminal Server" msgstr "" #: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Vendor" msgstr "المصنع" #: ../../standalone/drakgw:1 #, c-format msgid "Interface %s" msgstr "الواجهة %s" #: ../../steps.pm:1 #, c-format msgid "Configure mouse" msgstr "إعداد الفأرة" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Choose the mount points" msgstr "اختر نقاط التحميل" #: ../../help.pm:1 ../../standalone/drakTermServ:1 ../../standalone/drakfont:1 #, c-format msgid "OK" msgstr "موافق" #: ../../keyboard.pm:1 #, c-format msgid "Yugoslavian (latin)" msgstr "اليوغوسلافية (لاتيني)" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Installing" msgstr "جاري التثبيت" #: ../../mouse.pm:1 #, fuzzy, c-format msgid "Logitech MouseMan with Wheel emulation" msgstr "Logitech MouseMan" #: ../../any.pm:1 #, c-format msgid "Launch userdrake" msgstr "شغّل userdrake" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Is this an install or an upgrade?" msgstr "هل هذا تثبيت أم ترقية؟" #: ../../help.pm:1 #, c-format msgid "ISDN card" msgstr "بطاقة ISDN" #: ../advertising/02-community.pl:1 #, c-format msgid "" "To share your own knowledge and help build Linux software, join our " "discussion forums on our \"Community\" webpages." msgstr "" "لمشاركتنا بمعرفتك و للمساعدة في بناء أدوات Linux, انضم الى منتديات النقاش " "التي ستجدها في صفحة \"Community\" على موقعنا" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Hard drive.\n" msgstr "\t-القرص الصلب.\n" #: ../../help.pm:1 #, c-format msgid "" "This step is activated only if an old GNU/Linux partition has been found on\n" "your machine.\n" "\n" "DrakX now needs to know if you want to perform a new install or an upgrade\n" "of an existing Mandrake Linux system:\n" "\n" " * \"%s\": For the most part, this completely wipes out the old system. If\n" "you wish to change how your hard drives are partitioned, or change the file\n" "system, you should use this option. However, depending on your partitioning\n" "scheme, you can prevent some of your existing data from being over-written.\n" "\n" " * \"%s\": this installation class allows you to update the packages\n" "currently installed on your Mandrake Linux system. Your current\n" "partitioning scheme and user data is not altered. Most of other\n" "configuration steps remain available, similar to a standard installation.\n" "\n" "Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n" "running version \"8.1\" or later. Performing an Upgrade on versions prior\n" "to Mandrake Linux version \"8.1\" is not recommended." msgstr "" "يتم تنشيط هذه الخطوة فقط اذا تم ايجاد تجزئة Linux قديمة\n" "على جهازك.\n" "\n" "يحتاج DrakX الآن الى أن يعلم اذا كنت تريد التثبيت من الصفر أو\n" "تريد ترقية نظام Mandrake Linux الموجود لديك مسبقاً:\n" "\n" " * \"%s\": في الأغلب تقوم بازالة النظام القديم\n" "كلياً. اذا كنت تريد تغيير تجزئات القرص الصلب, أو تريد\n" "تغيير نظام الملفات, عليك اختيار هذا الخيار. عموماً اعتمادا\n" "على كيفية تجزئة القرص الصلب لديك. يمكنك منع ازالة بعض\n" "بياناتك الموجودة مسبقاً.\n" " * \"%s\": فئة التثبيت هذه تسمح لك بتحديث الحزم\n" "على نظام Mandrake Linux الخاص بك. لن يتم تغيير\n" "بياناتك أو تقسيمات القرص الصلب. أغلب خطوات التهيئة الأخرى\n" "لا تزال موجودة, مثل التثبيت الاعتيادي.\n" "\n" "استخدام خيار ``الترقية'' يجب أن يعمل بشكل جيد على\n" "اصدارات Mandrake Linux \"8.1\" أو ما فوق. لا ينصح بالترقية\n" "من اصادرات Mandrake Linux قبل \"8.1\"." #: ../../standalone/drakfont:1 #, c-format msgid "" "\n" " Copyright (C) 2001-2002 by MandrakeSoft \n" " DUPONT Sebastien (original version)\n" " CHAUMETTE Damien \n" "\n" " This program is free software; you can redistribute it and/or modify\n" " it under the terms of the GNU General Public License as published by\n" " the Free Software Foundation; either version 2, or (at your option)\n" " any later version.\n" "\n" " This program is distributed in the hope that it will be useful,\n" " but WITHOUT ANY WARRANTY; without even the implied warranty of\n" " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" " GNU General Public License for more details.\n" "\n" " You should have received a copy of the GNU General Public License\n" " along with this program; if not, write to the Free Software\n" " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" "\n" " Thanks:\n" " - pfm2afm: \n" "\t by Ken Borgendale:\n" "\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n" " - type1inst:\n" "\t by James Macnicol: \n" "\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n" " - ttf2pt1: \n" "\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" " Convert ttf font files to afm and pfb fonts\n" msgstr "" "\n" "جميع الحقوق محفوظة (C) 2001-2002 لـMandrakeSoft \n" " DUPONT Sebastien (الإصدار الأصلي)\n" " CHAUMETTE Damien \n" "\n" " هذا البرنامج هو برنامج حر; يمكنك اعادة توزيعة و/أو تعديله\n" " تحت بنود رخصة GNU العمومية الشاملة (GPL) كما نُشِرت عن طريق\n" " جمعية البرمجيات الحرة; إما اإصدار الثاني من الترخيص أو\n" " أي نسخة تالية (حسب اختيارك).\n" "\n" " هذا البرنامج يُوزَّع على أمل أن يكون مفيدا,\n" " لكن دون أي ضمان’; حتى بدون الضمانة المفهومة\n" " للإتجار أو المناسبة لغرض معين. انظر\n" " رخصة GNU العمومية الشاملة للتفاصيل.\n" "\n" " يجب أن تكون قد تسلمت نسخة من ترخيص GNU العمومية الشاملة\n" " مع البرنامج; في حالة عدم تسلم الرخصة راسل جمعية البرمجيات الحرة على " "العنوان التالي\n" " Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA " "02111-1307, USA.\n" "\n" " شكر خاص الى:\n" " - pfm2afm: \n" "\t من Ken Borgendale:\n" "\t يحوّل خطوط .pfm في Windows الى خطوط .afm (Adobe Font Matrix)\n" " - type1inst:\n" "\t من James Macnicol: \n" "\t يولد type1inst ملفات fonts.dir و fonts.scale و Fontmap.\n" " - ttf2pt1: \n" "\t من Andrew Weeks, Frank Siegert, Thomas Henlich و Sergey Babkin \n" " يحول خطوط ttf الى خطوط afm و pfb\n" #: ../../printer/main.pm:1 #, c-format msgid "Printer on remote CUPS server" msgstr "طابعة على خادم CUPS بعيد" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP." msgstr "تعذر حذف الطابعة \"%s\" من Star Office/OpenOffice.org/GIMP." #: ../../standalone/drakfont:1 #, c-format msgid "here if no." msgstr "إضغط هنا إذا لم تكن متأكدا." #: ../../network/network.pm:1 #, c-format msgid "DHCP host name" msgstr "اسم مستضيف DHCP" #: ../../standalone/drakgw:1 #, c-format msgid "The maximum lease (in seconds)" msgstr "الإيجار الأقصى (بالثواني)" #: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1 #, c-format msgid "Please choose which serial port your mouse is connected to." msgstr "فضلاً اختر المنفذ التسلسلي الموصلة به الفأرة" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Did it work properly?" msgstr "هل عملت بالشكل الصحيح؟" #: ../../fs.pm:1 #, c-format msgid "Mount the file system read-only." msgstr "" #: ../../security/level.pm:1 #, c-format msgid "Poor" msgstr "فقير" #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "Report check result by mail" msgstr "if set to yes, report check result by mail." #: ../../lang.pm:1 #, c-format msgid "Grenada" msgstr "عرينادا" #: ../../standalone/drakgw:1 #, c-format msgid "The DHCP start range" msgstr "حدود DHCP start" #: ../../any.pm:1 #, c-format msgid "Unsafe" msgstr "غير آمن" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "SSH server" msgstr "خادم SSH" #: ../../diskdrake/interactive.pm:1 #, c-format msgid ", %s sectors" msgstr ", %s قطاع" #: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1 #: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 #: ../../standalone/drakclock:1 ../../standalone/harddrake2:1 #, c-format msgid "No" msgstr "لا" #: ../../lang.pm:1 #, c-format msgid "Guadeloupe" msgstr "غواديلوب" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Kannada" msgstr "كندا" #: ../../standalone/drakfont:1 #, c-format msgid "could not find any font.\n" msgstr "لم أتمكن من إيجاد أي خط.\n" #: ../../standalone/keyboarddrake:1 #, c-format msgid "Do you want the BackSpace to return Delete in console?" msgstr "هل تريد أن يقوم زر BackSpace بعمل وظيفة زر Delete في سطر الأوامر؟" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Vertical refresh rate" msgstr "نسبة الإنعاش الرأسي" #: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1 #, c-format msgid "Entering step `%s'\n" msgstr "Entering step `%s'\n" #: ../../lang.pm:1 #, c-format msgid "Niger" msgstr "النيجر" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan" msgstr "Logitech MouseMan" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Removing %s ..." msgstr "جاري حذف %s ..." #: ../../install_steps_interactive.pm:1 #, c-format msgid "No printer" msgstr "لا طابعة" #: ../../standalone/logdrake:1 #, c-format msgid "alert configuration" msgstr "إعدادات التنبيه" #: ../../printer/printerdrake.pm:1 #, c-format msgid "NetWare Printer Options" msgstr "خيارات طابعة NetWare" #: ../../standalone/draksplash:1 #, c-format msgid "%s BootSplash (%s) preview" msgstr "%s BootSplash (%s) معاينة" #: ../../standalone/drakbackup:1 #, c-format msgid "February" msgstr "فبراير" #: ../../standalone/drakfloppy:1 #, c-format msgid "General" msgstr "عام" #: ../../security/l10n.pm:1 #, c-format msgid "/etc/issue* exist" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Add a user" msgstr "أضف مستخدم" #: ../../standalone/drakconnect:1 #, c-format msgid "Network configuration (%d adapters)" msgstr "اعدادات الشبكة (%d موائمات)" #: ../../standalone/drakbackup:1 #, c-format msgid "April" msgstr "أبريل" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Deactivate now" msgstr "قم بإزالة التنشيط الآن" #: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1 #, c-format msgid "Mandatory package %s is missing" msgstr "الحزمة الضرورية %s مفقودة" #: ../../lang.pm:1 #, c-format msgid "Philippines" msgstr "الفيليبين" #: ../../interactive.pm:1 ../../ugtk2.pm:1 #: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/gtk.pm:1 #: ../../interactive/http.pm:1 ../../interactive/newt.pm:1 #: ../../interactive/stdio.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/drakboot:1 ../../standalone/drakconnect:1 #: ../../standalone/drakfloppy:1 ../../standalone/drakperm:1 #: ../../standalone/draksec:1 ../../standalone/mousedrake:1 #: ../../standalone/net_monitor:1 #, c-format msgid "Ok" msgstr "موافق" #: ../../standalone/drakTermServ:1 #, c-format msgid "drakTermServ Overview" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Print Queue Name" msgstr "اسم صف الطابعة" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Do you want to use aboot?" msgstr "هل تريد استخدام aboot؟" #: ../../keyboard.pm:1 #, c-format msgid "Belarusian" msgstr "البيلاروسية" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "PDQ only supports local printers, remote LPD printers, and Socket/TCP " "printers.\n" msgstr "" "PDQ يدعم فقط الطابعات المحلية و طابعات LPD البعيدة و طابعات Socket/TCP.\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Move files to the new partition" msgstr "انقل الملفات الى تجزئة جديدة" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Add here the CUPS servers whose printers you want to use. You only need to " "do this if the servers do not broadcast their printer information into the " "local network." msgstr "" "أدخل هنا خادمات CUPS التي تريد استخدام طابعاتها. تحتاج الى عمل ذلك فقط ان لم " "تقم الخادمات بنشر معلومات الطابعات على الشبك المحلية." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/" "they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "أهلاً بكم في معالج اعداد الطابعات\n" "\n" "هذا المعالج سيساعدك على تثبيت الطابعة/الطابعات الموصولة بهذا الكمبيوتر.\n" "\n" "اذا كانت لديك طابعة/طابعات موصولة بهذه الماكينة, فضلاً قم بتوصيلها الى هذا " "الكمبيوتر و قم بتشغيلها كي يتم التحقق منها/منهم آلياً.\n" "\n" " انقر \"التالي\" عندما تكون مستعداً, و على \"الغاء\" اذا لم تكن تريد اعداد " "الطابعة/الطابعات الآن." #: ../../lang.pm:1 #, c-format msgid "Pitcairn" msgstr "بيتكايرن" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore From Catalog" msgstr "استعادة من الكتالوغ" #: ../../install_steps_interactive.pm:1 #, c-format msgid "IDE" msgstr "IDE" #: ../../fs.pm:1 #, c-format msgid "mounting partition %s in directory %s failed" msgstr "فشل تحميل التجزئة %s في الدليل %s" #: ../../standalone/drakboot:1 #, c-format msgid "Lilo screen" msgstr "شاشة Lilo" #: ../../bootloader.pm:1 ../../help.pm:1 #, c-format msgid "LILO with graphical menu" msgstr "LILO مع قائمة رسومية" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Estimating" msgstr "جاري الحساب التقريبي" #: ../../install_steps_gtk.pm:1 #, c-format msgid "You can't unselect this package. It is already installed" msgstr "لا يمكن ازالة اختيار هذه الحزم. انها مثبتة مسبقاً" #: ../../printer/printerdrake.pm:1 #, c-format msgid ", printer \"%s\" on SMB/Windows server \"%s\"" msgstr ", الطابعة \"%s\" على خادم SMB/Windows \"%s\"" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Go on anyway?" msgstr "هل تريد المتابعة على أي حال؟" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Looking for available packages and rebuilding rpm database..." msgstr "جاري البحث عن الحزم المتوفرة و اعداة بناء قاعدة بيانات rpm..." #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "" "\n" " DrakBackup Report \n" msgstr "" "\n" " تقرير DrakBackup \n" "\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Does not appear to be recordable media!" msgstr "لا يبدو وسيط قابل للكتابة!" #: ../../modules/interactive.pm:1 #, c-format msgid "Specify options" msgstr "حدد الخيارات" #: ../../lang.pm:1 #, c-format msgid "Vanuatu" msgstr "فاناتو" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "New user list:\n" msgstr "" "\n" "-ملفّات المستخدم:\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Either the server name or the server's IP must be given!" msgstr "يجب اعطاء اسم الخادم أو رقم IP الخاص بالخادم!" #: ../../any.pm:1 #, c-format msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "SILO on your system, or another operating system removes SILO, or SILO " "doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures.\n" "\n" "If you want to create a bootdisk for your system, insert a floppy in the " "first\n" "drive and press \"Ok\"." msgstr "" "قرص اقلاع مخصص يوفر طريقة للوصول الى نظام Linux الخاص بك دون\n" "الإعتماد على محمّل الإقلاع الإعتيادي. هذا مفيد اذا لم تكن تريد تثبيت\n" "SILO على نظامك, أو اذا أزال نظام تشغيل آخر LILO, أو اذا لم يتوافق SILO\n" "مع تهيئة نظامك. يمكن كذلك استخدام قرص اقلاع مخصص مع\n" "Mandrake rescue image, مما يجعل المعالجة من انهيارات النظام الخطيرة أكثر " "سهولة.\n" "اذا كنت تريد انشاء قرص اقلاع لنظامك, أدخل قرص مرن في السواقة\n" "الأولى و اضغط \"موافق\"." #: ../../fsedit.pm:1 #, c-format msgid "You can't use an encrypted file system for mount point %s" msgstr "لا يمكنك استخدام نظام ملفات مرمّز لنقطة التحميل %s" #: ../../security/help.pm:1 #, fuzzy, c-format msgid "Set the password history length to prevent password reuse." msgstr "" "Arguments: (arg)\n" "\n" "Set the password history length to prevent password reuse." #: ../../lang.pm:1 #, c-format msgid "Norfolk Island" msgstr "جزيرة نورفولك" #: ../../standalone/drakboot:1 #, c-format msgid "Theme installation failed!" msgstr "فشل تثبيت السمات" #: ../../fsedit.pm:1 #, c-format msgid "Nothing to do" msgstr "لا شيئ للعمل" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Use for loopback" msgstr "استخدم لـloopback" #: ../../standalone/drakbug:1 #, c-format msgid "Mandrake Bug Report Tool" msgstr "أداة تقرير العيوب في Mandrake" #: ../../standalone/printerdrake:1 #, c-format msgid "Apply filter" msgstr "طبّق المرشّح" #: ../../network/adsl.pm:1 #, c-format msgid "use pppoe" msgstr "استخدم pppoe" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Moving files to the new partition" msgstr "جاري نقل الملفات الى التجزئة الجديدة" #: ../../Xconfig/card.pm:1 #, c-format msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration" msgstr "XFree %s مع دعم تجريبي للرسوم ثلاثية الأبعاد" #: ../../help.pm:1 ../../interactive.pm:1 #, c-format msgid "Advanced" msgstr "متقدم" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Transfer" msgstr "انقل" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak (Swedish)" msgstr "Dvorak (سويدية)" #: ../../lang.pm:1 #, c-format msgid "Afghanistan" msgstr "أفغانستان" #: ../../standalone/drakbackup:1 #, c-format msgid "More Options" msgstr "خيارات أكثر" #: ../../standalone/drakbackup:1 #, c-format msgid "Delete Hard Drive tar files after backup to other media." msgstr "الغ ملفات tar الخلصة بالقرص تاصلب بعد النسخ الى وسيط آخر." #: ../../lang.pm:1 #, c-format msgid "Burundi" msgstr "بوروندي" #: ../../services.pm:1 #, c-format msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" "cron هو برنامج UNIX القياسي لتشغيل البرامج المحددة من قبل المستخدم\n" "عند أدوقات محددة دورياً. vixie cron يضيف عدداً من المزايا الى UNIX\n" "cron الأساسي, بما فيها حماية أمنية أفضل, و خيارات تهيئة أقوى." #: ../../standalone/drakTermServ:1 #, c-format msgid "Add Client -->" msgstr "اضافة عميل -->" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Read carefully!" msgstr "اقرأ جيدا!" #: ../../standalone/drakbackup:1 #, c-format msgid "RW" msgstr "RW" #: ../../standalone/drakxtv:1 #, c-format msgid "" "Please,\n" "type in your tv norm and country" msgstr "" "فضلاً,\n" "اطبع tv norm الخاص بك و بلدك" #: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Port" msgstr "البوابة" #: ../../standalone/drakgw:1 #, c-format msgid "No (experts only)" msgstr "لا (للخبراء فقط)" #: ../../standalone/drakTermServ:1 #, c-format msgid "No kernel selected!" msgstr "لم يتم ايجاد نواة!" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "Press enter to boot the selected OS, 'e' to edit the" msgstr "Press enter to boot the selected OS, 'e' to edit the" #: ../../standalone/drakperm:1 #, c-format msgid "Set-GID" msgstr "Set-GID" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "The encryption keys do not match" msgstr "مفاتيح التشفير غير متطابقة" #: ../../standalone/drakbackup:1 #, c-format msgid "" "For a multisession CD, only the first session will erase the cdrw. Otherwise " "the cdrw is erased before each backup." msgstr "" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "USB printer" msgstr ", طابعة USB" #: ../../keyboard.pm:1 #, c-format msgid "Right \"Windows\" key" msgstr "مفتاح \"Windows\" الأيمن" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check empty password in /etc/shadow." msgstr "if set to yes, check empty password in /etc/shadow." #: ../../help.pm:1 #, c-format msgid "" "Before continuing, you should carefully read the terms of the license. It\n" "covers the entire Mandrake Linux distribution. If you do agree with all the\n" "terms in it, check the \"%s\" box. If not, simply turn off your computer." msgstr "" "قبل المتابعة, عليك قراءة بنود الترخيص جيداً. انها\n" "تغطي كل توزيعة Mandrake Linux. اذا كنت توافق على كل البنود\n" "الموجودة فيها, قم بالتأشبر على صندوق \"%s\". ان لم تقبل, قم بإغلاق\n" "الكمبيوتر." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Here is a list of the available printing options for the current printer:\n" "\n" msgstr "" "هذه قائمة بالخيارات المتوفرة للطباعة على الطابعة الحالية:\n" "\n" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Resolutions" msgstr "دقة العرض" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "drakfirewall configurator\n" "\n" "This configures a personal firewall for this Mandrake Linux machine.\n" "For a powerful and dedicated firewall solution, please look to the\n" "specialized MandrakeSecurity Firewall distribution." msgstr "" "أداة تهيئة drakfirewall\n" "\n" "هذه الأداة تسمح لك بتهيئة جدار ناري شخصي لنظام Mandrake Linux هذا.\n" "إذا كنت تريد جدارا ناريا متخصصا, الق نظرة على\n" "توزيعة MandrakeSecurity Firewall." #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "" "Please enter your username, password and domain name to access this host." msgstr "" "فضلاً أدخل اسم المستخدم, كلمة المرور و النطاق الخاص بك للدخول الى هذا " "المستضيف." #: ../../standalone/scannerdrake:1 #, c-format msgid "Remove selected host" msgstr "احذف المستضيف المختار" #: ../../network/netconnect.pm:1 #, c-format msgid "Network configuration" msgstr "اعدادات الشبكة" #: ../../standalone/harddrake2:1 #, c-format msgid "/Autodetect _jaz drives" msgstr "/تحقق آلي من _سواقات Jaz" #: ../../any.pm:1 #, c-format msgid "No sharing" msgstr "لا مشاركة" #: ../../standalone/drakperm:1 #, c-format msgid "Move selected rule down one level" msgstr "انقل القاعدة المختارة الى تحت بمستوى واحد" #: ../../common.pm:1 #, c-format msgid "TB" msgstr "تيرابايت" #: ../../standalone/drakbackup:1 #, c-format msgid "FATAL" msgstr "FATAL" #: ../../standalone/printerdrake:1 #, c-format msgid "Refresh the list" msgstr "تحديث القائمة" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Per client %s:\n" " \tThrough clusternfs, each diskless client can have its own unique " "configuration files\n" " \ton the root filesystem of the server. By allowing local client " "hardware configuration, \n" " \tdrakTermServ will help create these files." msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "" "The DHCP server will allow other computer to boot using PXE in the given " "range of address.\n" "\n" "The network address is %s using a netmask of %s.\n" "\n" msgstr "" "سيسمح خادم DHCP للكمبيوترات الأخرى بالإقلاع باستخدام PXE في حدود العناوين " "المعطاة.\n" "\n" "عنوان الشبكة %s يستخدم netmask %s.\n" "\n" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #: ../../standalone/drakperm:1 ../../standalone/printerdrake:1 #, c-format msgid "Delete" msgstr "إلغاء" #: ../../Xconfig/various.pm:1 #, c-format msgid "" "I can setup your computer to automatically start the graphical interface " "(XFree) upon booting.\n" "Would you like XFree to start when you reboot?" msgstr "" "يمكنني جعل جهازك يبدأ X بشكل آلي بعد الإقلاع.\n" "هل تريد X أن بيدأ بعد إعادة تشغيل جهازك؟" #: ../../standalone/drakfloppy:1 #, c-format msgid "Build the disk" msgstr "جهز القرص" #: ../../standalone/net_monitor:1 #, c-format msgid "Disconnect %s" msgstr "اقطع الإتصال بـ %s" #: ../../standalone/drakconnect:1 #, c-format msgid "Status:" msgstr "الحالة:" #: ../../network/network.pm:1 #, c-format msgid "HTTP proxy" msgstr "بروكسي HTTP" #: ../../standalone/logdrake:1 #, c-format msgid "SSH Server" msgstr "خادم SSH" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by rsync.\n" msgstr "\t-الشبكة عن طريق rsync.\n" #: ../../network/isdn.pm:1 #, c-format msgid "European protocol" msgstr "البروتوكول الأوروبي" #: ../../printer/printerdrake.pm:1 #, c-format msgid ", printer \"%s\" on server \"%s\"" msgstr ", الطابعة \"%s\" على الخادم \"%s\"" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Note that currently all 'net' media also use the hard drive." msgstr "" "تأكد من أن مراقب cron موجود ضمن خدمات النظام. \n" "\n" "لاحظ أن كل وسائط الشبكة تستخدم القرص الصلب." #: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1 #: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1 #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1 #: ../../standalone/drakauth:1 ../../standalone/drakboot:1 #: ../../standalone/drakbug:1 ../../standalone/drakconnect:1 #: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1 #: ../../standalone/draksplash:1 ../../../move/move.pm:1 #, c-format msgid "Error" msgstr "خطأ" #: ../../any.pm:1 #, c-format msgid "allow \"su\"" msgstr "اسمح بـ\"su\"" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "Australia" msgstr "أوستراليا" #: ../../standalone/drakfont:1 #, c-format msgid "please wait during ttmkfdir..." msgstr "رجاء انتظر أثناء عملية ttmkfdir..." #: ../../Xconfig/card.pm:1 #, c-format msgid "Configure only card \"%s\"%s" msgstr "قم بإعداد البطاقة \"%s\"%s فقط" #: ../../standalone/harddrake2:1 #, c-format msgid "Level" msgstr "المستوى" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Change the printing system" msgstr "تغيير نظام الطباعة" #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your system supports multiple head configuration.\n" "What do you want to do?" msgstr "" "نظامك يدعم الإعداد متعدد الرؤوس.\n" "ماذا تريد أن تفعل؟" #: ../../partition_table.pm:1 #, c-format msgid "mount failed: " msgstr "فشل التحميل: " #: ../../steps.pm:1 #, c-format msgid "Configure services" msgstr "تهيئة الخدمات" #: ../../standalone/drakTermServ:1 #, c-format msgid "Broadcast Address:" msgstr "عنوان Broadcast:" #: ../../standalone/harddrake2:1 #, c-format msgid "" "the GNU/Linux kernel needs to run a calculation loop at boot time to " "initialize a timer counter. Its result is stored as bogomips as a way to " "\"benchmark\" the cpu." msgstr "" "نواة Linux تحتاج الى تشغيل حلقة حسابية (Calculation Loop) عند الإقلاع لتنشيط " "أداة عد الوقت. يتم حفظ النتيجة كـbogomips كطريقة \"للتأكد من صحة\" المعالج." #: ../../any.pm:1 #, c-format msgid "Image" msgstr "صورة" #: ../../services.pm:1 #, c-format msgid "Remote Administration" msgstr "ادارة عن بعد" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP." msgstr "تعذرت اضافة الطابعة \"%s\" الى Star Office/OpenOffice.org/GIMP." #: ../../modules.pm:1 #, c-format msgid "" "PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel." msgstr "" "دعم PCMCIA غير موجود بعد الآن لإصدار النواة 2.2. فضلا استخدم الإصدار 2.4" #: ../../standalone/drakfont:1 #, c-format msgid "Selected All" msgstr "تم اختيار الكل" #: ../../printer/data.pm:1 #, c-format msgid "CUPS - Common Unix Printing System" msgstr "CUPS - Common Unix Printing System" #: ../../standalone/logdrake:1 #, c-format msgid "Webmin Service" msgstr "خدمات Webmin" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "device" msgstr "وحدة" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Enter the directory to save to:" msgstr "فضلاً اختر الدليل الذي سيتم الحفظ فيه:" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Greece" msgstr "اليونان" #: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "All" msgstr "الكل" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Which printing system (spooler) do you want to use?" msgstr "أي نظام طباعة تريد أن تستخدم؟" #: ../../standalone/drakbackup:1 #, c-format msgid "July" msgstr "يوليو" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Prints into %s" msgstr ", جاري الطباعة الى %s" #: ../../install_steps_interactive.pm:1 ../../../move/move.pm:1 #, c-format msgid "An error occurred" msgstr "ظهر خطأ" #: ../../install_steps_gtk.pm:1 #, c-format msgid "" "This package must be upgraded.\n" "Are you sure you want to deselect it?" msgstr "" "يجب ترقية هذه الحزمة.\n" "هل أنت متأكد أنك لا تريد اختيارها؟" #: ../../keyboard.pm:1 #, c-format msgid "Tamil (Typewriter-layout)" msgstr "التاميل (آلة كاتبة)" #: ../../security/help.pm:1 #, fuzzy, c-format msgid "Use password to authenticate users." msgstr "" "Arguments: (arg)\n" "\n" "Use password to authenticate users." #: ../../security/help.pm:1 #, fuzzy, c-format msgid "" "Allow/Forbid the list of users on the system on display managers (kdm and " "gdm)." msgstr "" "Arguments: (arg)\n" "\n" "Allow/Forbid the list of users on the system on display managers (kdm and " "gdm)." #: ../../standalone/drakautoinst:1 #, c-format msgid "manual" msgstr "يدوي" #: ../../standalone/drakbackup:1 #, c-format msgid "Filename text to search for:" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer manufacturer, model, driver" msgstr "مصنّع الطابعة, الطراز, المشغّل" #: ../../standalone/drakfloppy:1 #, c-format msgid "" "There is no medium or it is write-protected for device %s.\n" "Please insert one." msgstr "" "لا يوجد وسط أو ربما يكون الوسط محمي من القراءة للجهاز %s.\n" "فضلاً ادخل وسط فى الوحدة." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Directory %s already contains data\n" "(%s)" msgstr "" "الدليل %s يحتوي مسبقا على بعض البيانات\n" "(%s)" #: ../../printer/main.pm:1 #, c-format msgid "Printer on NetWare server" msgstr "طابعة على خادم NetWare" #: ../../any.pm:1 #, c-format msgid "Give the ram size in MB" msgstr "اكتب حجم الذاكرة بالميغابايت" #: ../../standalone/drakbackup:1 #, c-format msgid "Friday" msgstr "الجمعة" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Disconnection from Internet complete." msgstr "اكتمل قطع الإتصال بالإنترنت" #: ../../any.pm:1 #, c-format msgid "Real name" msgstr "الاسم الحقيقي" #: ../../standalone/drakfont:1 #, c-format msgid "done" msgstr "انتهى" #: ../../standalone/drakbackup:1 #, c-format msgid "Please uncheck or remove it on next time." msgstr "فضلاً قم بإزالة التأشير أو احذفها في المرة القادمة." #: ../../security/level.pm:1 #, c-format msgid "Higher" msgstr "مرتفع أكثر" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Choose the partitions you want to format" msgstr "اختر التجزئات التي تريد تجهيزها" #: ../../standalone/drakxtv:1 #, c-format msgid "" "No TV Card has been detected on your machine. Please verify that a Linux-" "supported Video/TV Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" "لم يتم ايجاد بطاقة تلفاز على جهازك. فضلاً تأكد من أن بطاقة الفيديو/التلفاز " "المدعومة في Linux موصولة بشكل صحيح.\n" "\n" "\n" "يمكنك زيارة قاعدة بيانات العتاد المدعوم الخاصة بنا على:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" #: ../../standalone/drakbackup:1 #, c-format msgid "Can't find %s on %s" msgstr "تعذر ايجاد %s على %s" #: ../../keyboard.pm:1 #, c-format msgid "Japanese 106 keys" msgstr "اليابانية 106 مفاتيح" #: ../../standalone/scannerdrake:1 #, c-format msgid "Could not install the packages needed to share your scanner(s)." msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "This will take a few minutes." msgstr "سيستغرق هذا بضع دقائق." #: ../../lang.pm:1 #, c-format msgid "Burkina Faso" msgstr "بوركينافاسو" #: ../../standalone/drakbackup:1 #, c-format msgid "June" msgstr "يونيو" #: ../../standalone/scannerdrake:1 #, c-format msgid "Use scanners on remote computers" msgstr "استخدم الماسحات الضوئية على الحوايسب البعيدة" #: ../../standalone/drakperm:1 #, c-format msgid "Delete selected rule" msgstr "احذف القاعدة المختارة" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Accessing printers on remote CUPS servers" msgstr "الوصول الى الطابعات على خادمات CUPS البعيدة" #: ../../any.pm:1 #, c-format msgid "Insert a floppy in %s" msgstr "أدخل قرص مرن في %s" #: ../../lang.pm:1 #, c-format msgid "Maldives" msgstr "جزر المالديف" #: ../../any.pm:1 #, c-format msgid "compact" msgstr "مدمج" #: ../../common.pm:1 #, c-format msgid "1 minute" msgstr "دقيقة واحدة" #: ../../standalone/drakTermServ:1 #, c-format msgid "type: fat" msgstr "النوع: سميك" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "on channel %d id %d\n" msgstr "على القناة %d id %d\n" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device" msgstr ", جهاز متعدد الوظائف" #: ../../lang.pm:1 #, c-format msgid "Laos" msgstr "لاوس" #: ../advertising/04-configuration.pl:1 #, c-format msgid "" "Mandrake Linux 9.2 provides you with the Mandrake Control Center, a powerful " "tool to fully adapt your computer to the use you make of it. Configure and " "customize elements such as the security level, the peripherals (screen, " "mouse, keyboard...), the Internet connection and much more!" msgstr "" "يوفر Mandrake Linux 9.2 لك مركز تحكم Mandrake, و وهو أداة قوية لتعديل حاسوبك " "ليناسب احتياجاتك و لتهيئة و تخصيص عناصر مثل مستوى الأمن و الأجهزة الملحقة " "(الشاشة, الفأرة لوحة المفاتيح...), وصلة الإنترنت و غير ذلك الكثير!" #: ../../security/help.pm:1 #, fuzzy, c-format msgid "Activate/Disable ethernet cards promiscuity check." msgstr "" "Arguments: (arg)\n" "\n" "Activate/Disable ethernet cards promiscuity check." #: ../../install_interactive.pm:1 #, c-format msgid "There is no FAT partition to resize (or not enough space left)" msgstr "لا توجد تجزئة FAT قابل لتغيير حجمها (أو لا توجد مساحة كافية متبقية)" #: ../../standalone/drakperm:1 #, c-format msgid "Up" msgstr "فوق" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Firewall" msgstr "جدار ناري" #: ../../standalone/drakxtv:1 #, c-format msgid "Area:" msgstr "المنطقة :" #: ../../harddrake/data.pm:1 #, c-format msgid "(E)IDE/ATA controllers" msgstr "متحكمات (E)IDE/ATA" #: ../../fs.pm:1 #, c-format msgid "All I/O to the file system should be done synchronously." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer Server" msgstr "خادم الطابعة" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Custom configuration" msgstr "تهيئة مخصصة" #: ../../standalone/drakpxe:1 #, c-format msgid "" "Please indicate where the installation image will be available.\n" "\n" "If you do not have an existing directory, please copy the CD or DVD " "contents.\n" "\n" msgstr "" "فضلاً أخبر عن مكان صورة التثبيت.\n" "\n" "اذا لم يكن هناك دليل موجود, فضلاً انسخ محتويات القرص المدمج أو قرص DVD.\n" "\n" #: ../../lang.pm:1 #, c-format msgid "Saint Pierre and Miquelon" msgstr "سانت بيير و ميكيلون" #: ../../standalone/drakbackup:1 #, c-format msgid "September" msgstr "سبتمبر" #: ../../standalone/draksplash:1 #, c-format msgid "saving Bootsplash theme..." msgstr "جاري حفظ سمة Bootsplash..." #: ../../lang.pm:1 #, c-format msgid "Portugal" msgstr "البرتغال" #: ../../modules/interactive.pm:1 #, c-format msgid "Do you have another one?" msgstr "هل عندك واحدة أخرى؟" #: ../../printer/main.pm:1 #, c-format msgid ", printing to %s" msgstr ", جاري الطباعة الى %s" #: ../../network/network.pm:1 #, c-format msgid "Assign host name from DHCP address" msgstr "عيّن اسم المستضيف من عنوان DHCP" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Toggle to normal mode" msgstr "الانتقال الى الوضع العادي" #: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1 #, c-format msgid "Generic" msgstr "Generic" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Cylinder %d to %d\n" msgstr "الاسطوانة %d الى %d\n" #: ../../standalone/drakbug:1 #, c-format msgid "YOUR TEXT HERE" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "New profile..." msgstr "تشكيل جديد..." #: ../../modules/interactive.pm:1 ../../standalone/draksec:1 #, c-format msgid "NONE" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Which disk do you want to move it to?" msgstr "أي قرص تريد نقله؟" #: ../../standalone/draksplash:1 #, c-format msgid "Display logo on Console" msgstr "اعرض الشعار في سطر الأوامر" #: ../../any.pm:1 #, c-format msgid "Windows Domain" msgstr "نطاق Windows" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Saami (norwegian)" msgstr "Dvorak (نرويجيةّ)" #: ../../standalone/drakpxe:1 #, c-format msgid "Interface %s (on network %s)" msgstr "الواجهة %s (على الشبكة %s)" #: ../../standalone/drakbackup:1 #, c-format msgid "INFO" msgstr "INFO" #: ../../lang.pm:1 #, c-format msgid "Wallis and Futuna" msgstr "واليس و فوتونا" #: ../../standalone/drakTermServ:1 #, c-format msgid "Need to create /etc/dhcpd.conf first!" msgstr "لا حاجة الى انشاء /etc/dhcpd.conf أولاً!" #: ../../standalone/harddrake2:1 #, c-format msgid "Is FPU present" msgstr "هل FPU موجود" #: ../../services.pm:1 #, c-format msgid "" "No additional information\n" "about this service, sorry." msgstr "" "عفواً, لا توجد معلومات\n" "اضافية حزل هذه الحزمة." #: ../../standalone/scannerdrake:1 #, c-format msgid "There are no scanners found which are available on your system.\n" msgstr "لا توجد ماسحات ضوئية متوفرة على نظامك.\n" #: ../../standalone/drakTermServ:1 #, c-format msgid "Build Single NIC -->" msgstr "ابني NIC واحدة -->" #: ../../lang.pm:1 #, c-format msgid "Marshall Islands" msgstr "جزر مارشال" #: ../../ugtk2.pm:1 #, c-format msgid "Is this correct?" msgstr "هل هذا صحيح ؟ " #: ../../standalone/drakbackup:1 #, c-format msgid "Windows (FAT32)" msgstr "Windows (FAT32)" #: ../../steps.pm:1 #, c-format msgid "Root password" msgstr "كلمة مرور المستخدم الجذر" #: ../../standalone/drakTermServ:1 #, c-format msgid "Build All Kernels -->" msgstr "ابني كل اصدارات النواة -->" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "DVDRAM device" msgstr "وحدة" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, report unowned files." msgstr "if set to yes, report unowned files." #: ../../install_interactive.pm:1 #, c-format msgid "" "You don't have a swap partition.\n" "\n" "Continue anyway?" msgstr "" "ليست لديك تجزئة تبديل.\n" "\n" "هل تريد المتابعة على أي حال؟" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Version: " msgstr "الإصدار:" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Server IP missing!" msgstr "IP الخادم مفقود!" #: ../../lang.pm:1 #, c-format msgid "Suriname" msgstr "سورينام" #: ../../network/adsl.pm:1 #, fuzzy, c-format msgid "Use a floppy" msgstr "احفظ على قرص مرن" #: ../../any.pm:1 #, c-format msgid "Enable ACPI" msgstr "تمكين ACPI" #: ../../fs.pm:1 #, c-format msgid "Give write access to ordinary users" msgstr "" #: ../../help.pm:1 #, c-format msgid "Graphical Environment" msgstr "بيئات رسومية" #: ../../lang.pm:1 #, c-format msgid "Gibraltar" msgstr "جبل طارق" #: ../../network/modem.pm:1 #, c-format msgid "Do nothing" msgstr "لا تفعل شيئاً" #: ../../standalone/drakTermServ:1 #, c-format msgid "Delete Client" msgstr "احذف العميل" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Filesystem type: " msgstr "نوع نظام المفات: " #: ../../printer/printerdrake.pm:1 #, c-format msgid "Starting network..." msgstr "جاري بدء الشبكة..." #: ../../lang.pm:1 #, c-format msgid "Vietnam" msgstr "فييتنام" #: ../../standalone/harddrake2:1 #, c-format msgid "/_Fields description" msgstr "/_وصف الحقول" #: ../advertising/10-security.pl:1 #, c-format msgid "Optimize your security by using Mandrake Linux" msgstr "حسّن مستوى الأمن" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "\n" "\n" " Thanks:\n" "\t- LTSP Project http://www.ltsp.org\n" "\t- Michael Brown \n" "\n" msgstr "" "\n" "\n" " شكر خاص:\n" "\t- مشروع LTSP http://www.ltsp.org\n" "\t- مايكل براون \n" "\n" #: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1 #: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1 #: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1 #: ../../standalone/drakbackup:1 ../../standalone/drakbug:1 #: ../../standalone/drakconnect:1 ../../standalone/drakfont:1 #: ../../standalone/drakperm:1 ../../standalone/draksec:1 #: ../../standalone/harddrake2:1 #, c-format msgid "Help" msgstr "مساعدة" #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "Check if the network devices are in promiscuous mode" msgstr "if set to yes, check if the network devices are in promiscuous mode." #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Your personal phone number" msgstr "رقم الهاتف الشخصي الخاص بك" #: ../../install_interactive.pm:1 #, c-format msgid "Which size do you want to keep for Windows on" msgstr "على أي مساحة تريد حفظ Windows" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" msgstr "" "تم ارسال الصفحات الإختبارية الى الطابعة.\n" "قد يستغرق هذا بعض الوقت حتى تبدأ الطابعة.\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Username required" msgstr "يُحتاج الى اسم المستخدم" #: ../../standalone/drakfloppy:1 #, fuzzy, c-format msgid "Device" msgstr "الجهاز: " #: ../../help.pm:1 #, c-format msgid "" "Depending on the default language you chose in Section , DrakX will\n" "automatically select a particular type of keyboard configuration. However,\n" "you may not have a keyboard that corresponds exactly to your language: for\n" "example, if you are an English speaking Swiss person, you may have a Swiss\n" "keyboard. Or if you speak English but are located in Quebec, you may find\n" "yourself in the same situation where your native language and keyboard do\n" "not match. In either case, this installation step will allow you to select\n" "an appropriate keyboard from a list.\n" "\n" "Click on the \"%s\" button to be presented with the complete list of\n" "supported keyboards.\n" "\n" "If you choose a keyboard layout based on a non-Latin alphabet, the next\n" "dialog will allow you to choose the key binding that will switch the\n" "keyboard between the Latin and non-Latin layouts." msgstr "" "اعتماداً على اللغة الإفتراضية التي اخترتها في هذا القسم, سيقوم DrakX\n" "باختيار تهيئة لوحة المفاتيح آلياً. عموماً,\n" "ربما ليست لديك لوحة مفاتيح مقابلة بشكل مباشر للغتك:\n" "مثلاً ربما تكون عربياً متكلماً باللغة الإنجليزية, ربما تكون لديك\n" "لوحة مفاتيح سويسرية. اذا كنت تتكلم الإنجليزية لكن موجود في كيبك, ربما\n" "تجد نفسك في نفس الموقف حيث لا تتطابق لغتك مع لوحة المفاتيح.\n" "في الحالتين, ستسمح لك خطوة التثبيت ستسمح لك باختيار\n" "لوحة مفاتيح مناسبة من القائمة.\n" "\n" "انقر زر \"%s\" لعرض قائمة بكل لوحات المفاتيح\n" "المدعومة.\n" "\n" "اذا اخترت لوحة مفاتيح لحروف غير لاتينية, فسيسمح لك\n" "مربع الحوار التالي باختيار اختصارات لوحة المفاتيح التي\n" "ستغير وضع لوحة المفاتيح بين الحروف اللاتينية و الغير لاتينية." #: ../../printer/printerdrake.pm:1 #, c-format msgid "SMB (Windows 9x/NT) Printer Options" msgstr "خيارات طابعة SMB (Windows 9x/NT)" #: ../../printer/main.pm:1 #, c-format msgid "URI: %s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Valid user list changed, rewriting config file." msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "mkinitrd optional arguments" msgstr "mkinitrd الخصائص الاختيارية" #: ../advertising/03-software.pl:1 #, c-format msgid "" "Surf the Web with Mozilla or Konqueror, read your mail with Evolution or " "Kmail, create your documents with OpenOffice.org." msgstr "" "تصفح الإنترنت مع Mozilla أو Konqueror, اقرأ البريد باستخدام Evolution أو " "KMail, انشئ مستنداتك مع OpenOffice.org" #: ../../network/isdn.pm:1 #, c-format msgid "Protocol for the rest of the world" msgstr "بروتوكول لبقية العالم" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Print test pages" msgstr "اطبع صفحات اختبارية" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Activate now" msgstr "قم بالتنشيط الآن" #: ../../Xconfig/card.pm:1 #, c-format msgid "64 MB or more" msgstr "64 ميغابايت أو أكثر" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please select the test pages you want to print.\n" "Note: the photo test page can take a rather long time to get printed and on " "laser printers with too low memory it can even not come out. In most cases " "it is enough to print the standard test page." msgstr "" "فضلاً اختر الصفحات الإختبارية التي تود طباعتها.\n" "ملحوظة: الصفحة الإختبارية لصورة ستستغرق وقتاً طويلاً لطباعتها و على طابعات " "الليزر بكمية ذاكرة قليلة قد لا يتم طباعتها مطلقاً. في أغلب الأحيان يكفي أن " "تطبع الصفحة الإختبارية القياسية." #: ../../standalone/scannerdrake:1 #, c-format msgid "Please select the device where your %s is attached" msgstr "فضلاً اختر الجهاز المتصل به %s" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Not formatted\n" msgstr "غير مجهز\n" #: ../../standalone/draksec:1 #, c-format msgid "Periodic Checks" msgstr "تأكد دوري" #: ../../standalone/drakpxe:1 #, c-format msgid "PXE Server Configuration" msgstr "تهيئة خادم PXE" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup the system files before:" msgstr "انسخ ملفات النظام قبل:" #: ../../security/level.pm:1 #, c-format msgid "" "This is the standard security recommended for a computer that will be used " "to connect to the Internet as a client." msgstr "" "هذا هو المستوى الأمني القياسي للحاسوب الذي سيستخدم للإتصال بالإنترنت كعميل." #: ../../any.pm:1 #, c-format msgid "First floppy drive" msgstr "سواقة القرص المرن الأولى" #: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 #: ../../standalone/logdrake:1 #, c-format msgid "/File/_Quit" msgstr "/ملف/_خروج" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak" msgstr "Dvorak" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose the new size" msgstr "اختر الحجم الجديد" #: ../../standalone/harddrake2:1 #, c-format msgid "Media class" msgstr "فئة الوسيط" #: ../../standalone/XFdrake:1 #, c-format msgid "You need to log out and back in again for changes to take effect" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "The %s is not known by this version of Scannerdrake." msgstr "الـ %s غير معروف من قبل هذا الإصدار من Scannerdrake." #: ../../lang.pm:1 #, c-format msgid "Faroe Islands" msgstr "جزر الفيرو" #: ../../standalone/drakfont:1 #, c-format msgid "Restart XFS" msgstr "أعد تشغيل XFS" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Add host/network" msgstr "أضف مستضيف/شبكة" #: ../../standalone/scannerdrake:1 #, c-format msgid "Scannerdrake will not be started now." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Model name" msgstr "اسم الطراز" #: ../../lang.pm:1 #, c-format msgid "Albania" msgstr "ألبانيا" #: ../../lang.pm:1 #, c-format msgid "British Indian Ocean Territory" msgstr "منطقة جزر المحيط الهادي البريطانية" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Normal Mode" msgstr "وضع عادي" #: ../../standalone/drakbackup:1 #, c-format msgid "No CD-R/DVD-R in drive!" msgstr "لا يوجد قرص CD-R/DVD-R في السواقة" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer connection type" msgstr "نوع وصلة الطابعة" #: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, c-format msgid "No network adapter on your system!" msgstr "لا موائم شبكة على نظامك" #: ../../printer/main.pm:1 #, c-format msgid "Network %s" msgstr "الشبكة %s" #: ../../keyboard.pm:1 #, c-format msgid "Malayalam" msgstr "المالايالام" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Option %s out of range!" msgstr "الخيار %s خارج المتوسط!" #: ../../standalone/net_monitor:1 #, c-format msgid "Connect %s" msgstr "اتصل بـ %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Restarting CUPS..." msgstr "جاري اعادة تشغيل CUPS..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing/Scanning/Photo Cards on \"%s\"" msgstr "Printing/Scanning/Photo Cards on \"%s\"" #: ../../../move/move.pm:1 #, c-format msgid "Continue without USB key" msgstr "" #: ../../install_steps.pm:1 #, c-format msgid "Duplicate mount point %s" msgstr "نقطة تحميل مكررّة %s" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, run chkrootkit checks." msgstr "if set to yes, run chkrootkit checks." #: ../../network/tools.pm:1 #, c-format msgid "Connection Configuration" msgstr "اعدادات الوصلة" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Unknown|Generic" msgstr "غير معروف|عام" #: ../../help.pm:1 #, c-format msgid "" "At the time you are installing Mandrake Linux, it is likely that some\n" "packages have been updated since the initial release. Bugs may have been\n" "fixed, security issues resolved. To allow you to benefit from these\n" "updates, you are now able to download them from the Internet. Check \"%s\"\n" "if you have a working Internet connection, or \"%s\" if you prefer to\n" "install updated packages later.\n" "\n" "Choosing \"%s\" will display a list of places from which updates can be\n" "retrieved. You should choose one nearer to you. A package-selection tree\n" "will appear: review the selection, and press \"%s\" to retrieve and install\n" "the selected package(s), or \"%s\" to abort." msgstr "" "في الوقت الذي تقوم فيه بتثبيت Mandrake Linux, قد يكون تم تحديث\n" "بعض الحزم منذ الإصدار الأول, ربما يكون تم اصلاح بعض العيوب\n" "أو تم حل المشاكل الأمنية. لكي تستفيد من هذه التحديثات,يمكنك\n" "الآن تنزيل هذه التحديثات عبر الإنترنت. اختر\n" "\"%s\" اذا كانت لديك وصلة انترنت عاملة, أو \"%s\" اذا كنت تفضل\n" "تثبيت هذه التحديثات لاحقاً.\n" "\n" "اختيار \"%s\" يعرض قائمة بالأماكن التي يمكن منها الحصول\n" "على التحديثات. اختر المكان الأقرب اليك. سيتم عرض قائمة بالحزم\n" "راجع اختياراتك, ثم اضغط \"%s\" لتنزيل و تثبيت\n" "الحزم المختارة, أو \"%s\" لإحباط التحديث." #: ../../lang.pm:1 #, c-format msgid "Myanmar" msgstr "ميانمار" #: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1 #: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1 #: ../../standalone/draksplash:1 ../../standalone/harddrake2:1 #: ../../standalone/logdrake:1 ../../standalone/scannerdrake:1 #, c-format msgid "Quit" msgstr "خروج" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Auto allocate" msgstr "تحديد آلي" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Check bad blocks?" msgstr "تحقق من البلوكات السيئة؟" #: ../../harddrake/data.pm:1 #, c-format msgid "Other MultiMedia devices" msgstr "أجهز وسائط متعددة أخرى" #: ../../standalone/harddrake2:1 #, c-format msgid "burner" msgstr "ناسخ أقراص" #: ../../standalone/drakbug:1 #, c-format msgid "Bug Description/System Information" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid " (Default is all users)" msgstr "المستخدم الإفتراضي" #: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 #, c-format msgid "No remote machines" msgstr "لا أجهزة بعيدة" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "أهلاً بكم في معالج اعداد الطابعات\n" "\n" "هذا المعالج سيساعدك على تثبيت الطابعة/الطابعات الموصولة بهذا الكمبيوتر.\n" "\n" "اذا كانت لديك طابعة/طابعات موصولة بهذه الماكينة, فضلاً قم بتوصيلها الى هذا " "الكمبيوتر و قم بتشغيلها كي يتم التحقق منها/منهم آلياً.\n" "\n" " انقر \"التالي\" عندما تكون مستعداً, و على \"الغاء\" اذا لم تكن تريد اعداد " "الطابعة/الطابعات الآن." #: ../../any.pm:1 #, c-format msgid "Authentication NIS" msgstr "تحقق NIS" #: ../../any.pm:1 #, c-format msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "خيار ``تشديد خيارات سطر الأوامر`` بدون قائدة من دون كلمة مرور" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing currently enabled" msgstr "مشاركة الإتصال بالإنترنت ممكنة حاليا" #: ../../lang.pm:1 #, c-format msgid "United Arab Emirates" msgstr "الإمارات العربية المتحدة" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IO_0" msgstr "Card IO_0" #: ../../standalone/drakTermServ:1 #, c-format msgid "Disable Local Config" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Thailand" msgstr "تايلاند" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IO_1" msgstr "Card IO_1" #: ../../standalone/printerdrake:1 #, c-format msgid "Search:" msgstr "ابحث:" #: ../../lang.pm:1 #, c-format msgid "Kazakhstan" msgstr "كازاخستان" #: ../../standalone/drakTermServ:1 #, c-format msgid "Routers:" msgstr "الموجهات:" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Write" msgstr "اكتب %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Display all available remote CUPS printers" msgstr "اعرض كل طابعات CUPS البعيدة المتوفرة" #: ../../install_steps_newt.pm:1 #, c-format msgid "Mandrake Linux Installation %s" msgstr "تثبيت Mandrake Linux %s" #: ../../harddrake/sound.pm:1 #, c-format msgid "Unknown driver" msgstr "مشغل غير معروف" #: ../../keyboard.pm:1 #, c-format msgid "Thai keyboard" msgstr "لوحة المفاتيح التايلاندية" #: ../../lang.pm:1 #, c-format msgid "Bouvet Island" msgstr "جزيرة بوفيه" #: ../../network/modem.pm:1 #, c-format msgid "Dialup options" msgstr "خيارات الإتصال" #: ../../printer/printerdrake.pm:1 #, c-format msgid "If no port is given, 631 will be taken as default." msgstr "اذا لم يتم اعطاء منفذ, سيتم اتخاذ 631 كمنفذ افتراضي." #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Per client system configuration files:\n" " \tThrough clusternfs, each diskless client can have its own unique " "configuration files\n" " \ton the root filesystem of the server. By allowing local client " "hardware configuration, \n" " \tclients can customize files such as /etc/modules.conf, /etc/" "sysconfig/mouse, \n" " \t/etc/sysconfig/keyboard on a per-client basis.\n" "\n" " Note: Enabling local client hardware configuration does enable root " "login to the terminal \n" " server on each client machine that has this feature enabled. Local " "configuration can be\n" " turned back off, retaining the configuration files, once the client " "machine is configured." msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "" "Change your Cd-Rom!\n" "\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you don't have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" "غير القرص المدمج!\n" "\n" "فضلاً أدخل القرص المدمج المسمى \"%s\" في السواقة و انقر موافق عندما تنتهي.\n" "اذا لم يكن القرص لديك, اضغط الغاء لتجنب التثبيت من هذا القرص المدمج." #: ../../keyboard.pm:1 #, c-format msgid "Polish" msgstr "البولندية" #: ../../standalone/drakbug:1 #, c-format msgid "Mandrake Online" msgstr "Mandrake Online" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by webdav.\n" msgstr "\t-الشبكة عن طريق webdav.\n" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid ", multi-function device on a parallel port" msgstr ", جهاز متعدد الوظائف على المنفذ المتوازي #%s" #: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, c-format msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "" "لم يتم اكتشاف موائم ايثرنت على نظامك. فضلاً قم بتشغيل أداة تهيئة العتاد." #: ../../network/network.pm:1 ../../standalone/drakconnect:1 #: ../../standalone/drakgw:1 #, c-format msgid "Netmask" msgstr "Netmask" # #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "No hard drives found" msgstr "نعذر ايجاد أقراص صلبة" #: ../../mouse.pm:1 #, c-format msgid "2 buttons" msgstr "زرّين" #: ../../mouse.pm:1 #, c-format msgid "Logitech CC Series" msgstr "Logitech CC Series" #: ../../network/isdn.pm:1 #, c-format msgid "What kind is your ISDN connection?" msgstr "ما هو نوع وصلة ISDN لديك؟" #: ../../any.pm:1 #, c-format msgid "Label" msgstr "عنوان" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Save on floppy" msgstr "احفظ على قرص مرن" #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "Check open ports" msgstr "تم اكتشافه على المنفذ %s" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Edit selected printer" msgstr "حرر الخادم المختار" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer auto-detection" msgstr "تحقق آلي من الطابعات" #: ../../network/isdn.pm:1 #, c-format msgid "Which of the following is your ISDN card?" msgstr "أي من الآتي هي بطاقة ISDN الخاصة بك؟" #: ../../services.pm:1 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" "NFS بروتوكول شائع لمشاركة الملفات على شبكات TCP/IP.\n" "هذه الخدمة توفر وظائف NFS للأجهزة الخادمة, و التي يتم تهيئتها عن طريق\n" "ملف /etc/exports." #: ../../standalone/drakbug:1 #, c-format msgid "Msec" msgstr "Msec" #: ../../interactive/stdio.pm:1 #, c-format msgid "" "=> Notice, a label changed:\n" "%s" msgstr "" "=> Notice, a label changed:\n" "%s" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Number of capture buffers:" msgstr "Number of capture buffers:" #: ../../interactive/stdio.pm:1 #, c-format msgid "Your choice? (0/1, default `%s') " msgstr "Your choice? (0/1, default `%s') " #: ../../help.pm:1 #, c-format msgid "" "Any partitions that have been newly defined must be formatted for use\n" "(formatting means creating a file system).\n" "\n" "At this time, you may wish to reformat some already existing partitions to\n" "erase any data they contain. If you wish to do that, please select those\n" "partitions as well.\n" "\n" "Please note that it is not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n" "reformat partitions containing data that you wish to keep (typically\n" "\"/home\").\n" "\n" "Please be careful when selecting partitions. After formatting, all data on\n" "the selected partitions will be deleted and you will not be able to recover\n" "it.\n" "\n" "Click on \"%s\" when you are ready to format partitions.\n" "\n" "Click on \"%s\" if you want to choose another partition for your new\n" "Mandrake Linux operating system installation.\n" "\n" "Click on \"%s\" if you wish to select partitions that will be checked for\n" "bad blocks on the disk." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "French" msgstr "الفرنسية" #: ../../keyboard.pm:1 #, c-format msgid "Czech (QWERTY)" msgstr "التشيكية (QWERTY)" #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "Allow X Window connections" msgstr "وصلة Winmodem" #: ../../standalone/service_harddrake:1 #, c-format msgid "Hardware probing in progress" msgstr "جاري التحقق من العتاد" #: ../../network/shorewall.pm:1 ../../standalone/drakgw:1 #, c-format msgid "Net Device" msgstr "جهاز الشبكة" #: ../../install_steps_interactive.pm:1 ../../steps.pm:1 #, c-format msgid "Summary" msgstr "ملخص" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " "1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" " (المنافذ المتوازية: /dev/lp0, /dev/lp1, ..., مماشل لـ LPT1:, LPT2:, ..., " "طابعة USB الأولي: /dev/usb/lp0, طابعة USB الثانية: /dev/usb/lp1, ...)" #: ../../network/netconnect.pm:1 ../../network/tools.pm:1 #, c-format msgid "Next" msgstr "التالي" #: ../../bootloader.pm:1 #, c-format msgid "You can't install the bootloader on a %s partition\n" msgstr "يمكنك تثبيت محمّل الإقلاع على التجزئة %s\n" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "CHAP" msgstr "CHAP" #: ../../lang.pm:1 #, c-format msgid "Puerto Rico" msgstr "بورتوريكو" #: ../../network/network.pm:1 #, c-format msgid "(bootp/dhcp/zeroconf)" msgstr "(bootp/dhcp/zeroconf)" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "\n" "Welcome.\n" "\n" "The parameters of the auto-install are available in the sections on the left" msgstr "" "\n" "أهلاً بكم.\n" "\n" "معاوملات التثبيت الآلي موجودة على القسم الأيسر" #: ../../standalone/draksplash:1 #, c-format msgid "" "package 'ImageMagick' is required to be able to complete configuration.\n" "Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit" msgstr "" "حزمة 'ImageMagick' ضرورية لكي يتم اكمال التهيئة.\n" "اضغط \"موافق\" لتثبيت 'ImageMagick' أو \"الغاء\" للخروج" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "Telnet server" msgstr "خادم X" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian \"number row\" QWERTY" msgstr "الليتوانية \"صف رقمي\" QWERTY" #: ../../install_any.pm:1 #, c-format msgid "" "The following packages will be removed to allow upgrading your system: %s\n" "\n" "\n" "Do you really want to remove these packages?\n" msgstr "" "سيتم حذف هذه الحزم لكي تتم ترقية النظام: %s\n" "\n" "\n" "هل تريد حذف هذه الحزم فعلاً؟\n" #: ../../lang.pm:1 #, c-format msgid "Anguilla" msgstr "أنغويلا" #: ../../any.pm:1 #, c-format msgid "NIS Domain" msgstr "نطاق NIS" #: ../../lang.pm:1 #, c-format msgid "Antarctica" msgstr "القطب الجنوبي" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- User Files:\n" msgstr "" "\n" "-ملفّات المستخدم:\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Mount options" msgstr "خيارات التحميل" #: ../../lang.pm:1 #, c-format msgid "Jamaica" msgstr "جامايكا" #: ../../services.pm:1 #, c-format msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle or DVD players" msgstr "" "عين الأجهزة الخام الى أجهزة في وضع الكليشيه (مثل تجزئات\n" "الأقراص الصلبة), للاستخام في تطبيقات مثل Oracle أو مشغلات DVD" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Please wait, preparing installation..." msgstr "انتر من فضلك, جاري التحضير للتثبيت..." #: ../../keyboard.pm:1 #, c-format msgid "Czech (QWERTZ)" msgstr "التشيكية (QWERTZ)" #: ../../network/network.pm:1 #, c-format msgid "Track network card id (useful for laptops)" msgstr "تتبع هوية بطاقة الشبكة (مفيد للجاسبات الدفترية)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The port number should be an integer!" msgstr "يجب أن يكون رقم المنفذ رقماً صحيحاً!" #: ../../standalone/draksplash:1 #, c-format msgid "You must choose an image file first!" msgstr "يجب اختيار ملف صورة أولاً!" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore from Hard Disk." msgstr "استعد من القرص الصلب" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Add to LVM" msgstr "اضافة الى LVM" #: ../../network/network.pm:1 #, c-format msgid "DNS server" msgstr "خادم DNS" #: ../../lang.pm:1 #, c-format msgid "Trinidad and Tobago" msgstr "ترينياد و توباجو" #: ../../printer/printerdrake.pm:1 #, c-format msgid "LPD and LPRng do not support IPP printers.\n" msgstr "LPD و LPRng لا تدعم طابعات IPP.\n" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Host name or IP." msgstr "اسم المستضيف" #: ../../standalone/printerdrake:1 #, c-format msgid "/_Edit" msgstr "/_تحرير" #: ../../fsedit.pm:1 #, c-format msgid "simple" msgstr "بسيط" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Clear all" msgstr "أمسح الكل" #: ../../printer/printerdrake.pm:1 #, c-format msgid "No test pages" msgstr "لا صفحات اختبارية" #: ../../lang.pm:1 #, c-format msgid "Falkland Islands (Malvinas)" msgstr "جزر فوكلاند" #: ../../standalone/drakconnect:1 #, c-format msgid "Adapter %s: %s" msgstr "المحوّل %s: %s" #: ../../standalone/drakfloppy:1 #, fuzzy, c-format msgid "Boot disk creation" msgstr "صنع قرص مرن لبدء النظام" #: ../../standalone/drakbackup:1 #, c-format msgid "Monday" msgstr "الاثنين" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Unknown model" msgstr "طراز غير معروف" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check files/directories writable by everybody." msgstr "if set to yes, check files/directories writable by everybody." #: ../../help.pm:1 #, c-format msgid "authentication" msgstr "التحقق" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup Now" msgstr "قم بالنسخ الإحتياطي الآن" #: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #: ../../standalone/printerdrake:1 #, c-format msgid "/_File" msgstr "/_ملف" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Removing printer from Star Office/OpenOffice.org/GIMP" msgstr "جاري حذف الطابعة من Star Office/OpenOffice.org/GIMP" #: ../../services.pm:1 #, c-format msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Editable" msgstr "تعطيل" #: ../../network/ethernet.pm:1 #, fuzzy, c-format msgid "Which dhcp client do you want to use ? (default is dhcp-client)" msgstr "" "أي عميل DHCP تريد أن تستخدم؟\n" "الإفتراضي هو dhcp-client." #: ../../keyboard.pm:1 #, c-format msgid "Tamil (ISCII-layout)" msgstr "التاميل (ISCII)" #: ../../lang.pm:1 #, c-format msgid "Mayotte" msgstr "مايوت" #: ../../security/help.pm:1 #, fuzzy, c-format msgid "Set shell commands history size. A value of -1 means unlimited." msgstr "" "Arguments: (size)\n" "\n" "Set shell commands history size. A value of -1 means unlimited." #: ../../install_steps_gtk.pm:1 #, fuzzy, c-format msgid "%d KB\n" msgstr "الحجم: %d كيلوبايت\n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Creating auto install floppy..." msgstr "جاري انشاء قرص التثبيت الآلي..." #: ../../standalone/scannerdrake:1 #, c-format msgid "Searching for scanners ..." msgstr "جاري البحث عن الماسحات الضوئية..." #: ../../lang.pm:1 #, c-format msgid "Russia" msgstr "روسيا" #: ../../steps.pm:1 #, c-format msgid "Partitioning" msgstr "تجزئة الأقراص" #: ../../network/netconnect.pm:1 #, c-format msgid "ethernet card(s) detected" msgstr "تم اكتشاف بطاقة/بطاقات ايثرنت" #: ../../standalone/logdrake:1 #, c-format msgid "Syslog" msgstr "syslog" #: ../../standalone/drakbackup:1 #, c-format msgid "Can't create catalog!" msgstr "تعذر انشاء الكتالوغ!" #: ../advertising/11-mnf.pl:1 #, c-format msgid "" "Complete your security setup with this very easy-to-use software which " "combines high performance components such as a firewall, a virtual private " "network (VPN) server and client, an intrusion detection system and a traffic " "manager." msgstr "" "أكمل حماية أجهزتك مع هذا البرنامج السهل الاستخدام الذي يجمع بين المكونات " "عالية الأداء كالجدار الناري, وعميل و خادم الشبكات الافتراضية (VPN), اضافة " "الى نظام للتحقق من الاختراقات و مدير لتنظيم مسارات الشبكة." #: ../../fsedit.pm:1 #, c-format msgid "Not enough free space for auto-allocating" msgstr "لا توجد مساحة كافية للتحديد الآلي" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Set root password" msgstr "عيّن كلمة مرور المستخدم الجذر" #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "Enable IP spoofing protection" msgstr "" "Arguments: (arg, alert=1)\n" "\n" "Enable/Disable IP spoofing protection." #: ../../harddrake/sound.pm:1 #, c-format msgid "" "There's no free driver for your sound card (%s), but there's a proprietary " "driver at \"%s\"." msgstr "" "لا يوجد مشغل مفتوح المصدر لبطاقة الصوت (%s), لكن هناك مشغل تجاري في \"%s\"." #: ../../standalone/drakperm:1 #, c-format msgid "Group :" msgstr "المجموعة :" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "بعد تغيير حجم التجزئة %s, فإن كل البيانات على هذه التجزئة ستفقد" #: ../../standalone/drakconnect:1 #, c-format msgid "Internet connection configuration" msgstr "إعدادات الإتصال بالإنترنت" #: ../../security/help.pm:1 #, fuzzy, c-format msgid "Add the name as an exception to the handling of password aging by msec." msgstr "" "Arguments: (name)\n" "\n" "Add the name as an exception to the handling of password aging by msec." #: ../../network/isdn.pm:1 #, fuzzy, c-format msgid "USB" msgstr "LSB" #: ../../standalone/drakxtv:1 #, c-format msgid "Scanning for TV channels" msgstr "جاري ضبط قنوات التلفاز" #: ../../standalone/drakbug:1 #, c-format msgid "Kernel:" msgstr "النواة:" #: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 #, c-format msgid "/_About..." msgstr "/_حول..." #: ../../keyboard.pm:1 #, c-format msgid "Bengali" msgstr "البنغالية" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Preference: " msgstr "التفضيل: " #: ../../install_steps_interactive.pm:1 ../../services.pm:1 #, c-format msgid "Services: %d activated for %d registered" msgstr "الخدمات: %d منشّطة لـ %d مسجلة" #: ../../any.pm:1 #, c-format msgid "Create a bootdisk" msgstr "أنشئ قرص إقلاع" #: ../../lang.pm:1 #, c-format msgid "Solomon Islands" msgstr "جزر سليمان" #: ../../standalone/mousedrake:1 #, c-format msgid "Please test your mouse:" msgstr "من فضلك اختبر الفأرة:" #: ../../modules/interactive.pm:1 #, c-format msgid "(module %s)" msgstr "(الوحدة %s)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Workgroup" msgstr "مجموعة العمل" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer host name or IP" msgstr "اسم مستضيف الطابعة أو الـ IP" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "down" msgstr "انتهى" #: ../../standalone/drakbackup:1 #, c-format msgid "Host Path or Module" msgstr "وحدة أو مسار المستضيف" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "اسم الطابعة يجب أن يحتوي فقط على حروف و أرقام و شارطات تحتية" #: ../../standalone/drakgw:1 #, c-format msgid "Show current interface configuration" msgstr "أظهر تهيئة الواجهة الحالية" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Add Printer" msgstr "طابعة" #: ../../security/help.pm:1 #, fuzzy, c-format msgid "" "The argument specifies if clients are authorized to connect\n" "to the X server from the network on the tcp port 6000 or not." msgstr "" "Arguments: (arg)\n" "\n" "The argument specifies if clients are authorized to connect\n" "to the X server on the tcp port 6000 or not." #: ../../help.pm:1 #, c-format msgid "Development" msgstr "تطوير" #: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1 #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1 #: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/scannerdrake:1 #, c-format msgid "Done" msgstr "انتهى" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Web Server" msgstr "خادم الويب" #: ../../lang.pm:1 #, c-format msgid "Chile" msgstr "تشيلي" #: ../../standalone/drakbackup:1 #, c-format msgid "\tDo not include System Files\n" msgstr "\tلا تُضمن ملفات النظام\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The inkjet printer drivers provided by Lexmark only support local printers, " "no printers on remote machines or print server boxes. Please connect your " "printer to a local port or configure it on the machine where it is connected " "to." msgstr "" "مشغلات طابعتك inkjet التي تم توفيرها من Lexmark تدعم الطابعات المحلية فقط, " "لا يدعم المشغل الطابعات على الماكينات البعيدة أو خادمات الطباعة. فضلاً وصل " "طابعتك الى منفذ محلي أو قم بتهيئتها على الماكينة المرتبطة بها." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Your multi-function device was configured automatically to be able to scan. " "Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the " "scanner when you have more than one) from the command line or with the " "graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, " "you can also scan by choosing the appropriate point in the \"File\"/\"Acquire" "\" menu. Call also \"man scanimage\" on the command line to get more " "information.\n" "\n" "Do not use \"scannerdrake\" for this device!" msgstr "" "الجهاز المتعدد الوظائف الخاص بك تم تهيئته آلياً ليتمكن من المسح الضوئي. يمكنك " "الآن استخدام المسخ الضوئي باستخدام \"scanimage\" (\"scanimage -d hp:%s\" " "لتحديد الماسح الضوئي اذا كان لديك أكثر من واحد) من سطر الأوامر أو بالبرامج " "الرسومية \"xscanimage\" أو \"xsane\". اذا كنت تستخدم GIMP, يمكنك أيضاً المسح " "الضوئي باستخدام القوائم \"File\"/\"Acquire\". شغل الأمر \"man scanimage\" في " "سطر الأوامر للحصول على مزيد من المعلومات.\n" "\n" "لا تستخدم \"scannerdrake\" لهذا الجهاز!" #: ../../any.pm:1 #, c-format msgid "(already added %s)" msgstr "(تم اضافة %s مسبقا)" #: ../../any.pm:1 #, c-format msgid "Bootloader installation in progress" msgstr "محمل الإقلاع قيد التثبيت" #: ../../printer/main.pm:1 #, c-format msgid ", using command %s" msgstr ", باستخدام الأمر %s" #: ../../keyboard.pm:1 #, c-format msgid "Alt and Shift keys simultaneously" msgstr "مفاتيح Alt و Shift في نفس الوقت" #: ../../standalone/harddrake2:1 #, c-format msgid "Flags" msgstr "Flags" #: ../../standalone/drakTermServ:1 #, c-format msgid "Add/Del Users" msgstr "أضف/احذف المستخدمين" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Host/network IP address missing." msgstr "عنوان IP للمستضيف/الشبكة مفقود." #: ../../standalone/drakbackup:1 #, c-format msgid "weekly" msgstr "أسبوعيّا" #: ../../standalone/logdrake:1 ../../standalone/net_monitor:1 #, c-format msgid "Settings" msgstr "الضبط" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The entered host/network IP is not correct.\n" msgstr "عنوان IP المدُخل للمستضيف/الشبكة غير صحيح.\n" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Create/Transfer backup keys for SSH" msgstr "" "انشئ/لنقل\n" "مفاتيح النسخ الإحتياطي لـSSH" #: ../../any.pm:1 #, c-format msgid "Here is the full list of available countries" msgstr "ها هي قائمة كاملة بكل لوحات البلاد المتوفرة" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Alternative test page (A4)" msgstr "صفحة اختبارية بديلة (A4)" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" "اذا كانت لديك قل الأقراص في القائمة أدناه, اضغط موافق.\n" "اذا لم تمكن لديك أي من هذه الأقراص, اضغط الغاء.\n" "اذا كانت بعض هذه الأقراص مفقودة, قم بازالة اختيارهاثم اضغط موافق." #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Wait please" msgstr "الانتظار من فضلك" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "PAP" msgstr "PAP" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup user files" msgstr "انسخ ملفات المستخدم" #: ../../diskdrake/dav.pm:1 #, c-format msgid "New" msgstr "جديد" #: ../../help.pm:1 #, c-format msgid "" "This is the most crucial decision point for the security of your GNU/Linux\n" "system: you have to enter the \"root\" password. \"Root\" is the system\n" "administrator and is the only user authorized to make updates, add users,\n" "change the overall system configuration, and so on. In short, \"root\" can\n" "do everything! That is why you must choose a password that is difficult to\n" "guess - DrakX will tell you if the password that you chose too easy. As you\n" "can see, you are not forced to enter a password, but we strongly advise you\n" "against this. GNU/Linux is just as prone to operator error as any other\n" "operating system. Since \"root\" can overcome all limitations and\n" "unintentionally erase all data on partitions by carelessly accessing the\n" "partitions themselves, it is important that it be difficult to become\n" "\"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password -- it makes it far\n" "too easy to compromise a system.\n" "\n" "One caveat -- do not make the password too long or complicated because you\n" "must be able to remember it!\n" "\n" "The password will not be displayed on screen as you type it in. To reduce\n" "the chance of a blind typing error you will need to enter the password\n" "twice. If you do happen to make the same typing error twice, this\n" "``incorrect'' password will be the one you will have use the first time you\n" "connect.\n" "\n" "If you wish access to this computer to be controlled by an authentication\n" "server, click the \"%s\" button.\n" "\n" "If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" "services, select the appropriate one for \"%s\". If you do not know which\n" "one to use, you should ask your network administrator.\n" "\n" "If you happen to have problems with remembering passwords, if your computer\n" "will never be connected to the internet or that you absolutely trust\n" "everybody who uses your computer, you can choose to have \"%s\"." msgstr "" "هذه هي أهم خطوة تتخذها لأمن نظام Linux الخاص\n" "بك: عليك ادخال كلمة مرور المستخدم \"الجذر\" (root) و هو\n" "مدير النظام و المستخدم الوحيد المخول بتحديث النظام, اضافة المستخدمين,\n" "تغيير تهيئة النظام, الخ. باختصار يمكن للمستخدم \"الجذر\" أن يفعل\n" "كل شئ! لذا عليك اختيار كلمة المرور صعبة\n" "التخمين - سيخبرك DrakX اذا كانت كلمة المرور التي تستخدمها سهلة. كما\n" "ترى, لست مجبراً على ادخال كلمة مرور, لكننا ننصح بشدة لأن احتمال حدوث\n" "أخطاء مع Linux عادي مثل باقي أنظمة التشغيل الأخرى. و بما أن \"الجذر\" يمكنه\n" "تعدي كل الحدود و قد يحذف كل البيانات من دون قصد, لذا فيجب أن يكون من\n" "الصعب أن تصبح المستخدم \"الجذر\".\n" "\n" "يجب أن تكون كلمة المرور خليطاً من الحروف و الأرقام كما يجب أن تحتوي\n" "على 8 حروف على الأقل. لا تكتب كلمة مرور \"الجذر\" على ورق -- هذا يسهّل\n" "اختراق النظام اذا رأى أحد كلمة المرور.\n" "\n" "نصيحة أخرى -- لا تجعل كلمة المرور طويلة جداً أو معقّدة لأنك يجب أن تكون\n" "قادراً على تذكرها!\n" "\n" "لن يتم عرض كلمة المرور على الشاشة. لتقليل فرصة حدوث\n" "خطأ أثناء الكتابة, ستحتاج الى ادخال كلمة المرور مرتين.\n" "اذا أخطأت في الكتابة في المرتين, فسيجب استخدام كلمة\n" "المرور \"الخاطئة\" في المرة الأولى التي تدخل فيها الى النظام.\n" "\n" "اذا كنت تريد الوصول الى هذا الكمبيوتر لكي يتم التحكم بك عن طريق\n" "خادم مصادقة, اضغط زر \"%s\".\n" "\n" "اذا كانت شبكتك تستخدم LDAP, NIS, أو PDC Windows Domain Authentication " "Services\n" "عليك اختيار الخيار المناسب كـ\"%s\". اذا لم تعلم أي منها تريد\n" "استخدامه, اسأل مدير الشبكة لديك.\n" "\n" "اذا كانت لديك مشكلة في تذكر كلمات المرور, يمكنك اختيار\n" "\"%s\" اذا لم يكن الكمبيوتر الخاص بك متصلاً بالإنترنت,\n" "أو أنك تثق في اللذين يدخلون الى النظام." #: ../../security/l10n.pm:1 #, c-format msgid "Name resolution spoofing protection" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "At this point, DrakX will allow you to choose the security level desired\n" "for the machine. As a rule of thumb, the security level should be set\n" "higher if the machine will contain crucial data, or if it will be a machine\n" "directly exposed to the Internet. The trade-off of a higher security level\n" "is generally obtained at the expense of ease of use.\n" "\n" "If you do not know what to choose, stay with the default option." msgstr "" "عند هذه النقطة, سيسمح لك DrakX باختيار المستوى الأمني الذي ترغب به\n" "لهذه الماكينة. بديهياً, يجب تعيين مستوى أمني\n" "عالٍ اذا كانت الماكينة تحتوي على معلومات هامة, أو اذا كانت الماكينة\n" "ستُستخدم للإتصال بالإنترنت. ان استخدام مستوى أمني عالٍ يأتي\n" "عادة على حساب سهولة الإستخدام.\n" "\n" "اذا لم تكن تريد الإختيار, احفظ الاختيار الإفتراضي." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Load from floppy" msgstr "حمّل من قرص مرن" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The following printer was auto-detected. " msgstr "تم اكتشاف الطابعة الآتية آلياً. " #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Uses command %s" msgstr ", باستخدام الأمر %s" #: ../../standalone/drakTermServ:1 #, c-format msgid "Boot Floppy" msgstr "قرص الإقلاع" #: ../../keyboard.pm:1 #, c-format msgid "Norwegian" msgstr "النرويجية" #: ../../standalone/scannerdrake:1 #, c-format msgid "Searching for new scanners ..." msgstr "جاري البحث عن ماسحات ضوئية جديدة..." #: ../../standalone/logdrake:1 #, c-format msgid "Apache World Wide Web Server" msgstr "خادم الويب Apache" #: ../../standalone/harddrake2:1 #, c-format msgid "stepping of the cpu (sub model (generation) number)" msgstr "stepping of the cpu (sub model (generation) number)" #: ../../standalone/drakbackup:1 #, c-format msgid "select path to restore (instead of /)" msgstr "اختر مسار الإستعادة (بدلاً من / )" #: ../../standalone/draksplash:1 #, c-format msgid "Configure bootsplash picture" msgstr "تهيئة صورة الإقلاع" #: ../../lang.pm:1 #, c-format msgid "Georgia" msgstr "جورجيا" #: ../../lang.pm:1 #, c-format msgid "China" msgstr "الصين" #: ../../printer/printerdrake.pm:1 #, c-format msgid " (Make sure that all your printers are connected and turned on).\n" msgstr " (تأكد من أن كل الطابعات موصولة و تعمل).\n" #: ../../standalone/printerdrake:1 #, c-format msgid "Reading data of installed printers..." msgstr "جاري قراءة بيانات الطابعات المثبتة..." #: ../../standalone/drakbackup:1 #, c-format msgid " Erase Now " msgstr " امحِ الآن " #: ../../fsedit.pm:1 #, c-format msgid "server" msgstr "خادم" #: ../../install_any.pm:1 #, c-format msgid "Insert a FAT formatted floppy in drive %s" msgstr "أدخل قرص مرن مجهز على نظام ملفات FAT في السواقة %s" #: ../../standalone/harddrake2:1 #, c-format msgid "yes means the processor has an arithmetic coprocessor" msgstr "نعم تعني أن المعالج لديه معالج مساعد للعمليات الحسابية" #: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Please Wait... Applying the configuration" msgstr "يرجى الإنتظار... جاري تطبيق الإعدادات" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "Welcome to GRUB the operating system chooser!" msgstr "Welcome to GRUB the operating system chooser!" #: ../../bootloader.pm:1 #, c-format msgid "Grub" msgstr "Grub" #: ../../harddrake/data.pm:1 #, c-format msgid "SCSI controllers" msgstr "متحكمات SCSI" #: ../../printer/main.pm:1 #, c-format msgid " on LPD server \"%s\", printer \"%s\"" msgstr "على خادم LPD \"%s\", الطابعة \"%s\"" #: ../../standalone/drakedm:1 #, c-format msgid "Choosing a display manager" msgstr "جاري اختيار مدير العرض" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Zeroconf Host name" msgstr "اسم مستضيف Zeroconf" #: ../../standalone/drakbackup:1 #, c-format msgid "Custom setup/crontab entry:" msgstr "" #: ../../network/network.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "IP address should be in format 1.2.3.4" msgstr "عنوان IP يجب أن يكون على النسق 1.2.3.4" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Configure CUPS printing system" msgstr "تغيير نظام الطباعة" #: ../../lang.pm:1 #, c-format msgid "Ecuador" msgstr "الإكوادور" #: ../../standalone/drakautoinst:1 #, c-format msgid "Add an item" msgstr "أضف مادة" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The printers on this machine are available to other computers" msgstr "الطابعات على هذه الماكينة متوفرة للأجهزة الأخرى" #: ../../lang.pm:1 #, fuzzy, c-format msgid "China (Hong Kong)" msgstr "هونج كونج" #: ../../standalone/drakautoinst:1 #, c-format msgid "I can't find needed image file `%s'." msgstr "لا يمكنني ايجاد ملف الصورة `%s'." #: ../../install_steps_interactive.pm:1 #, c-format msgid "No sound card detected. Try \"harddrake\" after installation" msgstr "لم يتم ايجاد بطاقة الصوت. حاول تشغيل \"harddrake\" بعد التثبيت" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "Invalid port given: %s.\n" "The proper format is \"port/tcp\" or \"port/udp\", \n" "where port is between 1 and 65535." msgstr "" "تم اعطاء منفذ غير صالح: %s.\n" "النسق الصحيح هو \"port/tcp\" أو \"port/udp\", \n" "في حين يكون المنفذ (port) بين 1 و 65535." #: ../../any.pm:1 #, c-format msgid "Shell" msgstr "الغلاف" #: ../../lang.pm:1 #, c-format msgid "Sao Tome and Principe" msgstr "ساو تومي و البرينسيب" #: ../../network/isdn.pm:1 #, c-format msgid "PCI" msgstr "PCI" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Can't login using username %s (bad password?)" msgstr "تعذر الدخول باستخدام اسم المستخدم %s (كلمة مرور سيئة؟)" #: ../../keyboard.pm:1 #, c-format msgid "Azerbaidjani (latin)" msgstr "الأذربيجانية (لاتيني)" #: ../../standalone/drakbug:1 #, c-format msgid "Package not installed" msgstr "لم يتم تثبيت الحزمة" #: ../../lang.pm:1 #, c-format msgid "American Samoa" msgstr "ساموا الأمريكية" #: ../advertising/12-mdkexpert.pl:1 #, c-format msgid "Become a MandrakeExpert" msgstr "كن خبيراً في MandrakeExpert" #: ../../standalone/drakconnect:1 #, c-format msgid "Protocol" msgstr "البروتوكول" #: ../../standalone/drakfont:1 #, c-format msgid "Copy fonts on your system" msgstr "انسخ الخطوط الى نظامك" #: ../../standalone/harddrake2:1 #, c-format msgid "Harddrake help" msgstr "مساعدة Harddrake" #: ../../standalone/harddrake2:1 #, c-format msgid "Bogomips" msgstr "Bogomips" #: ../../standalone/drakTermServ:1 #, c-format msgid "Mandrake Terminal Server Configuration" msgstr "تهيئة خادم طرفيات Mandrake" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " DrakBackup Report Details\n" "\n" "\n" msgstr "" "\n" " تفاصيل تقرير DrakBackup\n" "\n" "\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore all backups" msgstr "استعد كل النسخ الإحتياطية" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid " on parallel port #%s" msgstr " على المنفذ المتوازي #%s" #: ../../security/help.pm:1 #, fuzzy, c-format msgid "" "Set the password minimum length and minimum number of digit and minimum " "number of capitalized letters." msgstr "" "Arguments: (length, ndigits=0, nupper=0)\n" "\n" "Set the password minimum length and minimum number of digit and minimum " "number of capitalized letters." #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check open ports." msgstr "if set to yes, check open ports." #: ../../standalone/drakbackup:1 #, c-format msgid "This may take a moment to erase the media." msgstr "قد يستغرق مسح الوسيط بعض الوقت." #: ../../install_steps_gtk.pm:1 #, c-format msgid "You can't select/unselect this package" msgstr "لا يمكنك اختيار/ازالة اختيار هذه الحزمة" #: ../../keyboard.pm:1 ../../diskdrake/interactive.pm:1 #: ../../harddrake/sound.pm:1 ../../network/modem.pm:1 #: ../../standalone/drakfloppy:1 #, c-format msgid "Warning" msgstr "تحذير" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Other Files:\n" msgstr "" "\n" "-الملفّات الأخرى:\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote host name" msgstr "اسم المستضيف البعيد" #: ../../any.pm:1 #, c-format msgid "access to X programs" msgstr "الوصول الى برامج X" #: ../../install_interactive.pm:1 #, c-format msgid "Computing the size of the Windows partition" msgstr "جاري حساب مساحة تجزئة Windows" #: ../../standalone/printerdrake:1 #, c-format msgid "/_Refresh" msgstr "/تح_ديث" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #: ../../standalone/drakxtv:1 #, c-format msgid "Italy" msgstr "إيطاليا" #: ../../lang.pm:1 #, c-format msgid "Cayman Islands" msgstr "جزر كايمان" #: ../../fs.pm:1 ../../partition_table.pm:1 #, c-format msgid "error unmounting %s: %s" msgstr "خطأ في ازالة تحميل %s: %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Name of printer" msgstr "اسم الطابعة" #: ../../standalone/drakgw:1 #, c-format msgid "disable" msgstr "تعطيل" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do it!" msgstr "افعلها!" #: ../../standalone/drakbackup:1 #, c-format msgid "%s not responding" msgstr "%s لا يستجيب" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Select model manually" msgstr "تم اختيار النّموذج يدويًّا" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Format" msgstr "تنسيق" #: ../../network/adsl.pm:1 #, c-format msgid "" "The most common way to connect with adsl is pppoe.\n" "Some connections use pptp, a few use dhcp.\n" "If you don't know, choose 'use pppoe'" msgstr "" "الطريقة الأكثر شيوعاً للإتصال بـ adsl هي pppoe.\n" "بعض الإتصالات تستخدم pptp, و القليل تستخدم dhcp.\n" "اذا لم تكن تعلم, اختر 'استخدم pppoe'" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Various" msgstr "متنوعة" #: ../../harddrake/data.pm:1 #, c-format msgid "Zip" msgstr "Zip" #: ../../keyboard.pm:1 #, c-format msgid "Left Alt key" msgstr "مفتاح Alt الأيسر" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Load setting" msgstr "حمل الإعدادات" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "\n" "Printerdrake could not determine which model your printer %s is. Please " "choose the correct model from the list." msgstr "" "\n" "\n" "لم يتمكن Printerdrake من التعرف على طراز طابعتك %s. فضلاً اختر الطراز الصحيح " "من القائمة." #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Set selected printer as the default printer" msgstr "عيّن هذه الطابعة كطابعة افتراضية" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Mark the printers which you want to transfer and click \n" "\"Transfer\"." msgstr "" "\n" "علّم على الطابعات التي تريد نقلها ثم انقر \n" "\"انقل\"." #: ../../printer/data.pm:1 #, c-format msgid "PDQ" msgstr "PDQ" #: ../../keyboard.pm:1 #, c-format msgid "Albanian" msgstr "الألبانيةّ" #: ../../lang.pm:1 #, c-format msgid "Lithuania" msgstr "ليتوانيا" #: ../../any.pm:1 #, c-format msgid "Compact" msgstr "مدمج" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Detected model: %s %s" msgstr "تم اكتشاف الطراز: %s %s" #: ../advertising/03-software.pl:1 #, c-format msgid "MandrakeSoft has selected the best software for you" msgstr "اختارت MandrakeSoft أفضل البرامج خصيصاً لك" #: ../../any.pm:1 #, c-format msgid "Local files" msgstr "ملفات محلية" #: ../../pkgs.pm:1 #, c-format msgid "maybe" msgstr "ربما" #: ../../lang.pm:1 #, c-format msgid "Panama" msgstr "بنما" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Can't open %s!" msgstr "تعذر ايجاد %s على %s" #: ../../Xconfig/various.pm:1 #, c-format msgid "" "Your graphic card seems to have a TV-OUT connector.\n" "It can be configured to work using frame-buffer.\n" "\n" "For this you have to plug your graphic card to your TV before booting your " "computer.\n" "Then choose the \"TVout\" entry in the bootloader\n" "\n" "Do you have this feature?" msgstr "" "بطاقة الرسوم الخاصة بك يبدو أنها تحتوي على موصل للتلفاز.\n" "يمكن تهيئة البطاقة للعمل باستخدام الـ frame-buffer.\n" "\n" "لهذا الغرض يجب عليك توصيل بطاقة الرسوم بالتلفاز قبل بدء تشغيل الكمبيوتر.\n" "ثم اختر \"TVout\" من محمّل الإقلاع\n" "\n" "هل لديك هذه الميزة؟" #: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1 #, c-format msgid "Monitor" msgstr "الشاشة" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are about to set up printing to a Windows account with password. Due to " "a fault in the architecture of the Samba client software the password is put " "in clear text into the command line of the Samba client used to transmit the " "print job to the Windows server. So it is possible for every user on this " "machine to display the password on the screen by issuing commands as \"ps " "auxwww\".\n" "\n" "We recommend to make use of one of the following alternatives (in all cases " "you have to make sure that only machines from your local network have access " "to your Windows server, for example by means of a firewall):\n" "\n" "Use a password-less account on your Windows server, as the \"GUEST\" account " "or a special account dedicated for printing. Do not remove the password " "protection from a personal account or the administrator account.\n" "\n" "Set up your Windows server to make the printer available under the LPD " "protocol. Then set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" "أنت على وشك تهيئة الطباعة على حساب في Windows مع كلمة مرور. بسبب خطأ في " "هيكلية عميل Samba, يتم وضع كلمة المرور بنص واضح في سطر أوامر عميل Samba " "المستخدم لنقل وظيفة الطباعة الى خادم Windows. لذا فإنه يمكن لكل مستخدم على " "هذه الماكينة أن يعرض كلمة المرور على الشاشة باستخدام كلمات مرور مثل \"ps " "auxwww\".\n" "\n" "نحن ننصح باستعمال واحد من البدائل التالية (في كل الحالات عليك التأكد أن " "الماكينات الموجودة فقط على الشبكة المحلية تستطيع الوصول الى خادم Windows, عن " "طريق استخدام جدار ناري مثلاً):\n" "\n" "استخدم حساب دون كلمة مرور على خادم Windows, مثل حساب \"GUEST\" أو حساب خاص " "لاستخدامه للطباعة. لا تقم بإزالة الحماية عن طريق كلمات المرور من حسابك " "الشخصي أو من حساب مدير النظام.\n" "\n" "قم بإعداد خادم Windows لجعل الطابعة متوفرة تحت بروتوكول LPD. ثم قم بإعداد " "الطباعة من هذه الماكينة مع نوع الوصلة \"%s\" في PrinterDrake.\n" "\n" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "65 thousand colors (16 bits)" msgstr "65 ألف لون (16 بت)" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Save on Hard drive on path: %s\n" msgstr "" "\n" "- احفظ على القرص الصلب على المسار:%s\n" #: ../../standalone/drakfont:1 #, c-format msgid "Remove fonts on your system" msgstr "احذف الخطوط من النظام" #: ../../standalone/drakgw:1 #, c-format msgid "" "Warning, the network adapter (%s) is already configured.\n" "\n" "Do you want an automatic re-configuration?\n" "\n" "You can do it manually but you need to know what you're doing." msgstr "" "تحذير, موائم الشبكة (%s) معدّ مسبقاً.\n" "\n" "هل تريد اعادة التهيئة آلياً؟\n" "\n" "يمكنك القيام بذلك يدوياً لكن يجب أن تكون على علم بما تفعل." #: ../../Xconfig/various.pm:1 #, c-format msgid "Graphical interface at startup" msgstr "واجهة رسومية عند بدء التشغيل" #: ../../network/netconnect.pm:1 #, c-format msgid " adsl" msgstr "" #: ../../raid.pm:1 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "التجزئات ليست كافية لمستوى RAID %d\n" #: ../../standalone/harddrake2:1 #, c-format msgid "format of floppies supported by the drive" msgstr "نسق الأقراص التي تدعمها السواقة" #: ../../network/tools.pm:1 #, c-format msgid "Firmware copy failed, file %s not found" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "local config: true" msgstr "غير معدّ" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; or to view information about " "it." msgstr "" "تمت تهيئة الطابعات الآتية. انقر نقرة مزدوجة على الطابعة لتغيير اعداداتها " "لجعلها طابعة افتراضية أو لرؤية معلومات حولها." #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Connected" msgstr "متّصل" #: ../../keyboard.pm:1 #, c-format msgid "Macedonian" msgstr "المقدونية" #: ../../lang.pm:1 #, c-format msgid "Mali" msgstr "مالي" #: ../../harddrake/data.pm:1 #, c-format msgid "Bridges and system controllers" msgstr "متحكمات النظام" #: ../../standalone/logdrake:1 #, c-format msgid "/File/_Save" msgstr "/ملف/_حفظ" #: ../../install_steps_gtk.pm:1 #, c-format msgid "No details" msgstr "لا تفاصيل" #: ../../pkgs.pm:1 #, c-format msgid "very nice" msgstr "ظريف جداً" #: ../../standalone/draksplash:1 #, c-format msgid "Preview" msgstr "معاينة" #: ../../standalone/drakbug:1 #, c-format msgid "Remote Control" msgstr "التحكم عن بعد" #: ../../standalone/drakbackup:1 #, c-format msgid "Please select media for backup..." msgstr "رجاء اختر وسيط النسخ الإحتياطي..." #: ../../standalone/logdrake:1 #, c-format msgid "Wrong email" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "XFree86 server: %s\n" msgstr "خادم XFree86: %s\n" #: ../../standalone/drakTermServ:1 #, c-format msgid "Allow Thin Clients" msgstr "اسمح للعملاء النحاف (Thin Clients)" #: ../../keyboard.pm:1 #, c-format msgid "Georgian (\"Russian\" layout)" msgstr "الجورجية (التصميم الروسي)" #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #: ../../standalone/printerdrake:1 #, c-format msgid "/_Options" msgstr "/_خيارات" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Your printer model" msgstr "طراز الطابعة الخاصة بك" #: ../../any.pm:1 #, c-format msgid "" "\n" "\n" "(WARNING! You're using XFS for your root partition,\n" "creating a bootdisk on a 1.44 Mb floppy will probably fail,\n" "because XFS needs a very large driver)." msgstr "" "\n" "\n" "(تحذير! أنت تستخدم XFS للتجزئة الجذرية,\n" "عمل قرص مرن للإقلاع قد يفشل على الأرجح,\n" "لأن XFS يحتاج الى مشغل كبير الحجم)." #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Delete hard drive tar files after backup.\n" msgstr "" "\n" "- احذف كل ملفات tar الخاصة بالقرص الصلب بعد كل عملية نسخ.\n" #: ../../standalone/drakpxe:1 #, c-format msgid "" "No CD or DVD image found, please copy the installation program and rpm files." msgstr "تعذر ايجاد صورة CD أو DVD, فضلاً انسخ برنامج التثبين وملفات rpm" #: ../advertising/04-configuration.pl:1 #, c-format msgid "Mandrake's multipurpose configuration tool" msgstr "أداة Mandrake المتعددة الاستخدامات للتهيئة" #: ../../standalone/drakbackup:1 ../../standalone/logdrake:1 #, c-format msgid "Save" msgstr "حفظ" #: ../../standalone/scannerdrake:1 #, c-format msgid "The %s is unsupported" msgstr "هذا الـ %s غير مدعوم" #: ../../services.pm:1 #, c-format msgid "Load the drivers for your usb devices." msgstr "حمّل مشغلات أجهزة USB." #: ../../harddrake/data.pm:1 #, c-format msgid "Disk" msgstr "القرص" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Enter a printer device URI" msgstr "أدخل URI الخاص بالطابعة" #: ../advertising/01-thanks.pl:1 #, c-format msgid "" "The success of MandrakeSoft is based upon the principle of Free Software. " "Your new operating system is the result of collaborative work of the " "worldwide Linux Community." msgstr "" "نجاح MandrakeSoft مبني على مبدأ حرية البرامح. نظام التشغيل الجديد الخاص بك " "هو نتيجة للتعاون و العمل الجاد من جزء من مجتمع Linux حول العالم" #: ../../lang.pm:1 #, c-format msgid "Israel" msgstr "اسرائيل" #: ../../lang.pm:1 #, c-format msgid "French Guiana" msgstr "غويانا الفرنسية" #: ../../lang.pm:1 #, c-format msgid "default:LTR" msgstr "default:RTL" #: ../../printer/printerdrake.pm:1 #, c-format msgid "A command line must be entered!" msgstr "يجب ادخال سطر أوامر" #: ../../standalone/drakbackup:1 #, c-format msgid "Select user manually" msgstr "اخترالمستخدم يدويًّا" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Transfer printer configuration" msgstr "نقل إعدادات الطابعة" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do you want to enable printing on the printers mentioned above?\n" msgstr "هل تريد تمكين الطباعة على الطابعات المذكورة أعلاه؟\n" #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "Check additions/removals of suid root files" msgstr "if set to yes, check additions/removals of suid root files." #: ../../any.pm:1 #, c-format msgid "" "For this to work for a W2K PDC, you will probably need to have the admin " "run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" "add and reboot the server.\n" "You will also need the username/password of a Domain Admin to join the " "machine to the Windows(TM) domain.\n" "If networking is not yet enabled, Drakx will attempt to join the domain " "after the network setup step.\n" "Should this setup fail for some reason and domain authentication is not " "working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) " "Domain, and Admin Username/Password, after system boot.\n" "The command 'wbinfo -t' will test whether your authentication secrets are " "good." msgstr "" "For this to work for a W2K PDC, you will probably need to have the admin " "run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" "add and reboot the server.\n" "You will also need the username/password of a Domain Admin to join the " "machine to the Windows(TM) domain.\n" "If networking is not yet enabled, Drakx will attempt to join the domain " "after the network setup step.\n" "Should this setup fail for some reason and domain authentication is not " "working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) " "Domain, and Admin Username/Password, after system boot.\n" "The command 'wbinfo -t' will test whether your authentication secrets are " "good." #: ../../printer/main.pm:1 #, c-format msgid "%s (Port %s)" msgstr "%s (المنفذ %s)" #: ../../standalone/drakbackup:1 #, c-format msgid "Use network connection to backup" msgstr "استخدم الإتصال بالشبكة للنسخ الإحتياطي" #: ../../standalone/drakfloppy:1 #, c-format msgid "Kernel version" msgstr "اصدارة النواة" #: ../../help.pm:1 #, c-format msgid "" "It is now time to specify which programs you wish to install on your\n" "system. There are thousands of packages available for Mandrake Linux, and\n" "to make it simpler to manage the packages have been placed into groups of\n" "similar applications.\n" "\n" "Packages are sorted into groups corresponding to a particular use of your\n" "machine. Mandrake Linux has four predefined installations available. You\n" "can think of these installation classes as containers for various packages.\n" "You can mix and match applications from the various groups, so a\n" "``Workstation'' installation can still have applications from the\n" "``Development'' group installed.\n" "\n" " * \"%s\": if you plan to use your machine as a workstation, select one or\n" "more of the applications that are in the workstation group.\n" "\n" " * \"%s\": if plan on using your machine for programming, choose the\n" "appropriate packages from that group.\n" "\n" " * \"%s\": if your machine is intended to be a server, select which of the\n" "more common services you wish to install on your machine.\n" "\n" " * \"%s\": this is where you will choose your preferred graphical\n" "environment. At least one must be selected if you want to have a graphical\n" "interface available.\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group. If you unselect all groups when performing a regular\n" "installation (as opposed to an upgrade), a dialog will pop up proposing\n" "different options for a minimal installation:\n" "\n" " * \"%s\": install the minimum number of packages possible to have a\n" "working graphical desktop.\n" "\n" " * \"%s\": installs the base system plus basic utilities and their\n" "documentation. This installation is suitable for setting up a server.\n" "\n" " * \"%s\": will install the absolute minimum number of packages necessary\n" "to get a working Linux system. With this installation you will only have a\n" "command line interface. The total size of this installation is about 65\n" "megabytes.\n" "\n" "You can check the \"%s\" box, which is useful if you are familiar with the\n" "packages being offered or if you want to have total control over what will\n" "be installed.\n" "\n" "If you started the installation in \"%s\" mode, you can unselect all groups\n" "to avoid installing any new package. This is useful for repairing or\n" "updating an existing system." msgstr "" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Accept user" msgstr "وافق على المستخدم" #: ../../help.pm:1 ../../diskdrake/dav.pm:1 #, c-format msgid "Server" msgstr "خادم" #: ../../keyboard.pm:1 #, c-format msgid "Left Shift key" msgstr "مفتاح Shift الأيسر" #: ../../network/netconnect.pm:1 #, c-format msgid " local network" msgstr " الشبكة المحلية" #: ../../interactive/stdio.pm:1 #, c-format msgid "Bad choice, try again\n" msgstr "اختيار سيئ, حاول مرة أخرى\n" #: ../../security/l10n.pm:1 #, c-format msgid "Syslog reports to console 12" msgstr "" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Search new servers" msgstr "ابحث عن خادمات جديدة" #: ../../lang.pm:1 #, c-format msgid "Heard and McDonald Islands" msgstr "جزر هيرد و ماكدونالد" #: ../../harddrake/sound.pm:1 #, c-format msgid "No alternative driver" msgstr "لا مشغل بديل" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Toggle to expert mode" msgstr "النتقال الى وضعية الخبير" #: ../../printer/cups.pm:1 #, c-format msgid "(on this machine)" msgstr "(على هذا الجهاز)" #: ../../network/network.pm:1 #, c-format msgid "Gateway address should be in format 1.2.3.4" msgstr "عنوان البوابات يجب أن تكون على النسق 1.2.3.4" #: ../../network/modem.pm:1 #, c-format msgid "" "\"%s\" based winmodem detected, do you want to install needed software ?" msgstr "تم ايجاد الوينمودم \"%s\", هل تريد تثبيت البرامج المطلوبة ؟" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Looking at packages already installed..." msgstr "جاري التعرف على الحزم المثبتة مسبقاً..." #: ../../standalone/drakbackup:1 #, c-format msgid "Use Differential Backups" msgstr "استخدم النسخ الاختلافي" #: ../../standalone/drakconnect:1 #, c-format msgid "Driver" msgstr "المحرك" #: ../../services.pm:1 #, c-format msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "" "Linuxconf يقوم في بعض الأحيان بالترتيب لعمل بعض الأعمال\n" "عند الإقلاع للمحافظة على اعدادات النظام." #: ../../standalone/drakbackup:1 #, c-format msgid "DVD-R device" msgstr "جهاز DVDR" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Printer on remote lpd server" msgstr "طابعة على خادم lpd بعيد" #: ../../standalone/drakfont:1 #, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "-You can install the fonts the normal way. In rare cases, bogus fonts may " "hang up your X Server." msgstr "" "قبل تثبيت أي خطوط تأكد أنه لديك الحق باستخدامهم و تثبيتهم على النظام.\n" "\n" "-يمكنك تثبيت الخطوط بالطريقة العادية. في حالات نادرة, قد تتسبب الخطوط " "المزيفة في تعليق خادم X." #: ../../help.pm:1 #, c-format msgid "" "Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n" "boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n" "detected and installed in the bootloader menu. If this is not the case, you\n" "can add an entry by hand in this screen. Be careful to choose the correct\n" "parameters.\n" "\n" "Yaboot's main options are:\n" "\n" " * Init Message: a simple text message displayed before the boot prompt.\n" "\n" " * Boot Device: indicates where you want to place the information required\n" "to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n" "to hold this information.\n" "\n" " * Open Firmware Delay: unlike LILO, there are two delays available with\n" "yaboot. The first delay is measured in seconds and at this point, you can\n" "choose between CD, OF boot, MacOS or Linux;\n" "\n" " * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" "After selecting Linux, you will have this delay in 0.1 second increments\n" "before your default kernel description is selected;\n" "\n" " * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n" "at the first boot prompt.\n" "\n" " * Enable OF Boot?: checking this option allows you to choose ``N'' for\n" "Open Firmware at the first boot prompt.\n" "\n" " * Default OS: you can select which OS will boot by default when the Open\n" "Firmware Delay expires." msgstr "" "Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n" "boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n" "detected and installed in the bootloader menu. If this is not the case, you\n" "can add an entry by hand in this screen. Be careful to choose the correct\n" "parameters.\n" "\n" "Yaboot's main options are:\n" "\n" " * Init Message: a simple text message displayed before the boot prompt.\n" "\n" " * Boot Device: indicates where you want to place the information required\n" "to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n" "to hold this information.\n" "\n" " * Open Firmware Delay: unlike LILO, there are two delays available with\n" "yaboot. The first delay is measured in seconds and at this point, you can\n" "choose between CD, OF boot, MacOS or Linux;\n" "\n" " * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" "After selecting Linux, you will have this delay in 0.1 second increments\n" "before your default kernel description is selected;\n" "\n" " * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n" "at the first boot prompt.\n" "\n" " * Enable OF Boot?: checking this option allows you to choose ``N'' for\n" "Open Firmware at the first boot prompt.\n" "\n" " * Default OS: you can select which OS will boot by default when the Open\n" "Firmware Delay expires." #: ../../standalone/drakbackup:1 #, c-format msgid "Wednesday" msgstr "الأربعاء" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Germany" msgstr "ألمانيا" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Austria" msgstr "النمسا" #: ../../mouse.pm:1 #, c-format msgid "No mouse" msgstr "لا فأرة" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Choose your CD/DVD media size (MB)" msgstr "فضلاً اختر مساحة وسيط CD/DVD (بالميغابايت)" #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "Check permissions of files in the users' home" msgstr "if set to yes, check permissions of files in the users' home." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Run \"sndconfig\" after installation to configure your sound card" msgstr "شغّل \"sndconfig\" بعد التثبيت لتهيئة بطاقة الصوت الخاصة بك" #: ../../ugtk2.pm:1 #, c-format msgid "Collapse Tree" msgstr "Collapse Tree" #: ../../standalone/drakautoinst:1 #, c-format msgid "Auto Install Configurator" msgstr "أداة اعداد المثبّت الآلي" #: ../../steps.pm:1 #, c-format msgid "Configure networking" msgstr "تهيئة الشبكة" #: ../../any.pm:1 #, c-format msgid "Where do you want to install the bootloader?" msgstr "أين تريد تثبيت محمّل الإقلاع؟" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "Your choice of preferred language will affect the language of the\n" "documentation, the installer and the system in general. Select first the\n" "region you are located in, and then the language you speak.\n" "\n" "Clicking on the \"%s\" button will allow you to select other languages to\n" "be installed on your workstation, thereby installing the language-specific\n" "files for system documentation and applications. For example, if you will\n" "host users from Spain on your machine, select English as the default\n" "language in the tree view and \"%s\" in the Advanced section.\n" "\n" "Note that you're not limited to choosing a single additional language. You\n" "may choose several ones, or even install them all by selecting the \"%s\"\n" "box. Selecting support for a language means translations, fonts, spell\n" "checkers, etc. for that language will be installed. Additionally, the\n" "\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n" "however that this is an experimental feature. If you select different\n" "languages requiring different encoding the unicode support will be\n" "installed anyway.\n" "\n" "To switch between the various languages installed on the system, you can\n" "launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n" "language used by the entire system. Running the command as a regular user\n" "will only change the language settings for that particular user." msgstr "" "اختيارك للغة المفضلة سيؤثر على لغة وثائق المساعدة\n" "و برنامج التثبيت و النظام بشكل عام. أو?ً اختر المنطقة التي\n" "تتواجد فيها, ثم اللغة التي تتحدث بها.\n" "\n" "ضغط زر \"متقدم\" سيسمح لك باختيار لغات\n" "أخرى ليتم تثبيتها على محطة العمل الخاصة بك,و من ثم\n" "تثبيت الملفات الخاصة باللغات لوثائق المساعدة و التطبيقات, مثلاً\n" "اذا كنت ستستضيف مستخدمين من أسبانيا على ماكينتك, اختر ا?نجليزية\n" "كلغة افتراضية في النمط الشجري و \"ا?سبانية\" في القسم\n" "المتقدم.\n" "?حظ أنك لست مقيداً باختيار لغة واحدة اضافية. حال\n" "اختيارك للإعدادات المحلية, اضغط زر \"التالي ->\"\n" "للمتابعة.\n" "\n" "للتغيير بين اللغات المتعددة المثبتة على النظام, يمكنك\n" "تشغيل ا?مر \"/usr/sbin/localedrake\"كمستخدم جذر لتغيير\n" "اللغة المستخدمة عن طريق النظام ككل. تشغيل ا?مر كمستخدم عادي\n" "سيغير فقط اعدادات اللغة لهذا المستخدم فقط." #: ../../standalone/scannerdrake:1 #, c-format msgid "The %s is not supported by this version of Mandrake Linux." msgstr "الـ %s غير مدعوم من هذا الإصدار من Mandrake Linux." #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "tape" msgstr "شريط البيانات" #: ../../standalone/drakconnect:1 #, c-format msgid "DHCP client" msgstr "DHCP العميل " #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "List users on display managers (kdm and gdm)" msgstr "" "Arguments: (arg)\n" "\n" "Allow/Forbid the list of users on the system on display managers (kdm and " "gdm)." #: ../../mouse.pm:1 #, c-format msgid "Logitech Mouse (serial, old C7 type)" msgstr "Logitech Mouse (serial, old C7 type)" #: ../../partition_table.pm:1 #, c-format msgid "Restoring from file %s failed: %s" msgstr "فشلت الإستعادة من الملف %s: %s" #: ../../fsedit.pm:1 #, c-format msgid "" "I can't read the partition table of device %s, it's too corrupted for me :(\n" "I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" "The other solution is to not allow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to lose all the partitions?\n" msgstr "" "لا يمكنني قراءة جدول التجزئات للجهاز %s, يبدو أنه مخرّب :(\n" "يمكنني أن أحاول المتابعة مع ازالة التجزئات السيئة (ستضيع كل البيانات!).\n" "الحل الآخر هو أن تمنع DrakX من تعديل جدول التقسيمات.\n" "(الخطأ هو %s)\n" "\n" "هل أنت موافق على خسارة كل التجزئات؟\n" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Find Package" msgstr "%d حزم" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Are you sure that you want to set up printing on this machine?\n" msgstr "هل أنت متأكد أنك تريد تنصيب الطباعة على هذه الماكينة؟\n" #: ../../standalone/harddrake2:1 #, c-format msgid "New devfs device" msgstr "جهاز devfs جديد" #: ../../standalone/drakbackup:1 #, c-format msgid "ERROR: Cannot spawn %s." msgstr "ERROR: Cannot spawn %s." #: ../../standalone/drakboot:1 #, c-format msgid "Boot Style Configuration" msgstr "اعداد أسلوب الإقلاع" #: ../../help.pm:1 #, c-format msgid "Automatic time synchronization" msgstr "تزامن وقت آلي" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup files not found at %s." msgstr "ملفات النسخ الإحتياطي غير موجودة على %s" #: ../../keyboard.pm:1 #, c-format msgid "Armenian (phonetic)" msgstr "الأرمينية (صوتي)" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Card model:" msgstr "نوع البطاقة" #: ../../standalone/drakTermServ:1 #, c-format msgid "Thin Client" msgstr "عميل نحيف (Thin Client)" #: ../advertising/01-thanks.pl:1 #, c-format msgid "Thank you for choosing Mandrake Linux 9.2" msgstr "شكراً لاختيارك Mandrake Linux 9.2" #: ../../standalone/drakTermServ:1 #, c-format msgid "Start Server" msgstr "ابدأ الخادم" #: ../../lang.pm:1 #, c-format msgid "Turkmenistan" msgstr "تركمانستان" #: ../../standalone/scannerdrake:1 #, c-format msgid "All remote machines" msgstr "كل الماكينات البعيدة" #: ../../standalone/drakboot:1 #, c-format msgid "Install themes" msgstr "ثبت السمات" #: ../../help.pm:1 #, c-format msgid "Espanol" msgstr "الأسبانية" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Preparing installation" msgstr "جاري التحضير للتثبيت" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Edit selected host/network" msgstr "حرّر المستضيف/الشبكة المختارة" #: ../../standalone/drakTermServ:1 #, c-format msgid "Add User -->" msgstr "اضف مستخدم -->" #: ../../lang.pm:1 #, c-format msgid "Nauru" msgstr "ناورو" #: ../../standalone/drakfont:1 #, c-format msgid "True Type fonts installation" msgstr "تثبيت خطوط True Type" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detect printers connected directly to the local network" msgstr "تحقّق آلياً من الطابعات الموصولة مباشرةً بالشبكة المحلية" #: ../../standalone/drakconnect:1 #, c-format msgid "LAN configuration" msgstr "إعداد LAN" #: ../../standalone/harddrake2:1 #, c-format msgid "hard disk model" msgstr "طراز القرص الصلب" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Maintain /etc/exports:\n" " \tClusternfs allows export of the root filesystem to diskless " "clients. drakTermServ\n" " \tsets up the correct entry to allow anonymous access to the root " "filesystem from\n" " \tdiskless clients.\n" "\n" " \tA typical exports entry for clusternfs is:\n" " \t\t\n" " \t/\t\t\t\t\t(ro,all_squash)\n" " \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n" "\t\t\t\n" " \tWith SUBNET/MASK being defined for your network." msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "You can't use a LVM Logical Volume for mount point %s" msgstr "لا يمكنك استخدام LVM Logical Volume لنقطة التحميل %s" #: ../../standalone/drakfont:1 #, c-format msgid "Get Windows Fonts" msgstr "احصل على خطوط Windows" #: ../../mouse.pm:1 #, c-format msgid "Mouse Systems" msgstr "Mouse Systems" #: ../../standalone/drakclock:1 #, c-format msgid "" "Your computer can synchronize its clock\n" " with a remote time server using NTP" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Iranian" msgstr "الإيرانيّة" #: ../../lang.pm:1 #, c-format msgid "Croatia" msgstr "كرواتيا" #: ../../standalone/drakconnect:1 #, c-format msgid "Gateway:" msgstr "البوابة:" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Add server" msgstr "اضف خادم" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote printer name" msgstr "اسم الطابعة البعيدة" #: ../advertising/10-security.pl:1 #, c-format msgid "" "MandrakeSoft has designed exclusive tools to create the most secured Linux " "version ever: Draksec, a system security management tool, and a strong " "firewall are teamed up together in order to highly reduce hacking risks." msgstr "" "صممّت MandrakeSoft أدوات خاصة لإنشاء أكثر اصدارات Linux أماناً: DrakSec, أداة " "ادارة أمن النظام, اضافة الى جدار ناري قوي في وقت واحد و هذا لتخفيض أخطار " "الاختراقات." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Device: " msgstr "الجهاز: " #: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1 #, c-format msgid "Printerdrake" msgstr "Printerdrake" #: ../../install_steps_interactive.pm:1 #, c-format msgid "License agreement" msgstr "اتفاقية الترخيص" #: ../../standalone/draksec:1 #, c-format msgid "System Options" msgstr "خيارات النظام" #: ../../security/level.pm:1 #, c-format msgid "Please choose the desired security level" msgstr "فضلاً اختر مستوى الأمن الذي تريده" #: ../../standalone/scannerdrake:1 #, c-format msgid "This host is already in the list, it cannot be added again.\n" msgstr "هذا المستضيف موجود في القائمة مسبقاً, لا يمكن اضافته مرة أخرى.\n" #: ../../printer/main.pm:1 #, c-format msgid ", USB printer" msgstr ", طابعة USB" #: ../../standalone/drakfloppy:1 #, fuzzy, c-format msgid "" "Unable to properly close mkbootdisk:\n" "\n" "%s" msgstr "" "تعذر غلق mkbootdisk: \n" " %s \n" " %s" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Incremental backups only save files that have changed or are new since the " "last backup." msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Choose the applications that will support the fonts:" msgstr "اختر التطبيقات التي ستدعم الخطوط :" #: ../../steps.pm:1 #, c-format msgid "Configure X" msgstr "تهيئة X" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "hd" msgstr "تشاد" #: ../../keyboard.pm:1 #, c-format msgid "Turkish (traditional \"F\" model)" msgstr "التّركية (طراز \"F\" التقليدي)" #: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1 #: ../../standalone/scannerdrake:1 #, c-format msgid "Congratulations!" msgstr "تهانينا!" #: ../../standalone/drakperm:1 #, c-format msgid "Use owner id for execution" msgstr "استخدم owner id للتنفيذ" #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "Allow remote root login" msgstr "" "Arguments: (arg)\n" "\n" "Allow/Forbid remote root login." #: ../../standalone/drakperm:1 #, c-format msgid "Down" msgstr "تحت" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Raw printer (No driver)" msgstr "طابعة خام (لا مشغل)" #: ../../network/modem.pm:1 #, c-format msgid "Install rpm" msgstr "ثبت rpm" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print a file from the command line (terminal window) you can either use " "the command \"%s \" or a graphical printing tool: \"xpp \" or " "\"kprinter \". The graphical tools allow you to choose the printer and " "to modify the option settings easily.\n" msgstr "" "لطباعة ملف من سطر الأوامر يمكنك أن تستخدم الأمر \"%s \" أو أن تستخدم " "أداة طباعة رسومية: \"xpp \" أو \"kprinter \". الأدوات الرسومية " "تسمح لك باختيار الطابعات و تعديل خياراتها بسهولة.\n" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Time remaining " msgstr "الوقت المتبقي" #: ../../keyboard.pm:1 #, c-format msgid "UK keyboard" msgstr "لوحة المفاتيح البريطانية" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Unmount" msgstr "احذف التحميل" #: ../../mouse.pm:1 #, c-format msgid "Microsoft Explorer" msgstr "Microsoft Explorer" #: ../../standalone/drakfont:1 #, c-format msgid "Uninstall Fonts" msgstr "اخذف الخطوط" #: ../../../move/move.pm:1 #, fuzzy, c-format msgid "Please wait, detecting and configuring devices..." msgstr "انتظر من فضلك, جاري تعيين مستوى الأمن.." #: ../../keyboard.pm:1 #, c-format msgid "German (no dead keys)" msgstr "الألمانية (لا مفاتيح ميتة)" #: ../../standalone/drakbackup:1 #, c-format msgid "\tSend mail to %s\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Transferring %s..." msgstr "جاري نقل %s..." #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "32 thousand colors (15 bits)" msgstr "32 ألف لون (15 بت)" #: ../../any.pm:1 #, c-format msgid "" "You can export using NFS or Samba. Please select which you'd like to use." msgstr "يمكنك التصدير باستخدام NFS أو Samba. أي منهما تريد" #: ../../lang.pm:1 #, c-format msgid "Gambia" msgstr "غامبيا" #: ../../standalone/drakbug:1 #, c-format msgid "Mandrake Control Center" msgstr "مركز تحكم Mandrake" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../../move/move.pm:1 #, c-format msgid "Reboot" msgstr "اعادة التشغيل" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Multi-function device" msgstr ", جهاز متعدد الوظائف" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "You can enter miscellaneous ports. \n" "Valid examples are: 139/tcp 139/udp.\n" "Have a look at /etc/services for information." msgstr "" "يمكنك ادخال منافذ متنوعة. \n" "أمثلة صالحة هي: 139/tcp 139/udp.\n" "الق نظرة على /etc/services لمزيد من المعلومات." #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Tape \n" msgstr "\t-الشريط \n" #: ../../standalone/drakhelp:1 #, c-format msgid "" "No browser is installed on your system, Please install one if you want to " "browse the help system" msgstr "" "لا يوجد متصفح مثبت على نظامك, فضلاً قم بتثبيت متصفح اذا كنت ترغب في تصفح نظام " "المساعدة" #: ../../standalone/drakbackup:1 #, c-format msgid "Remember this password" msgstr "تذكّر كلمة السر هذه" #: ../../install_steps_gtk.pm:1 #, c-format msgid "due to unsatisfied %s" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing is now enabled." msgstr "مشاركة إتصال الإنترنت ممكَّنة الآن." #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by SSH.\n" msgstr "\t-الشبكة عن طريق SSH.\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" " If the desired printer was auto-detected, simply choose it from the list " "and then add user name, password, and/or workgroup if needed." msgstr "" " اذا تم اكتشاف الطابعة المطلوبة آلياً, كل ما عليك هو اختيارها من القائمة ثم " "أضف اسم المستخدم, كلمة المرور, و/أو مجموعة العمل ان احتجت لذلك." #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid " cable" msgstr "الجدول" #: ../../help.pm:1 ../../install_interactive.pm:1 #, c-format msgid "Use the free space on the Windows partition" msgstr "استخدم المساحة الفارغة على تجزئة Windows" #: ../../standalone/scannerdrake:1 #, c-format msgid "%s found on %s, configure it automatically?" msgstr "%s تم ايجاده على %s, هل تريد تهيئته آلياً؟" #: ../../Xconfig/various.pm:1 #, c-format msgid "XFree86 driver: %s\n" msgstr "مشغل XFree86: %s\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "This host/network is already in the list, it cannot be added again.\n" msgstr "هذا المستضيف/الشبكة موجود في القائمة مسبقاً, لا يمكن اضافته مرة أخرى.\n" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Choose the packages you want to install" msgstr "اختر الحزم التي تريد تثبيتها" #: ../../lang.pm:1 #, c-format msgid "Papua New Guinea" msgstr "بابوا غينيا الجديدة" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Multi-function device on a parallel port" msgstr ", جهاز متعدد الوظائف على المنفذ المتوازي #%s" #: ../../../move/tree/mdk_totem:1 #, fuzzy, c-format msgid "Busy files" msgstr "انسخ ملفات النظام" #: ../../keyboard.pm:1 #, c-format msgid "Serbian (cyrillic)" msgstr "الصربية (سيريلي)" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Enter the directory where backups are stored" msgstr "فضلاً أدخل الدليل الموجودة فيه النسخ الإحتياطية" #: ../../standalone/draksplash:1 #, c-format msgid "Make kernel message quiet by default" msgstr "اجعل رسائل النواة صامتة افتراضياً" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Do you want to set this printer (\"%s\")\n" "as the default printer?" msgstr "" "هل تريد تعيين هذه الطابعة (\"%s\")\n" "كطابعة افتراضية؟" #: ../../standalone/drakgw:1 #, c-format msgid "The DHCP end range" msgstr "حدود DHCP end" #: ../../any.pm:1 #, c-format msgid "Creating bootdisk..." msgstr "انشاء قرص الإقلاع..." #: ../../standalone/net_monitor:1 #, c-format msgid "Wait please, testing your connection..." msgstr "انتظر من فضلك, جاري اختبار الإتصال..." #: ../../install_interactive.pm:1 #, c-format msgid "Bringing down the network" msgstr "جاري اغلاق الشبكة" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Login ID" msgstr "اسم الدخول" #: ../../services.pm:1 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" "NFS بروتوكول شائع لمشاركة الملفات على شبكات\n" "TCP/IP. هذه الخدمة تسمح لك بالتحكم بالملفات عن طريق NFS." #: ../../standalone/drakconnect:1 #, c-format msgid "DHCP Client" msgstr "DHCP العميل" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "" "This is HardDrake, a Mandrake hardware configuration tool.\n" "Version: %s\n" "Author: Thierry Vignaud <" "tvignaud@mandrakesoft.com>\n" "\n" msgstr "" "هذا هو HardDrake, أداة Mandrake لتهيئة العتاد.\n" "الإصدار: %s\n" "المؤلف: تييري فينيو \n" "\n" #: ../../standalone/drakgw:1 #, c-format msgid "dismiss" msgstr "اهمال" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing/Scanning on \"%s\"" msgstr "جاري الطباعة/المسح على \"%s\"" #: ../../standalone/drakfloppy:1 #, c-format msgid "omit raid modules" msgstr "RAID اهمل وحدات ال" #: ../../services.pm:1 #, c-format msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" "lpd هو مراقب الطباعة الذي يحتاجه أمر lpr للعمل بشل صحيح. أساساً\n" "هو خادم يوصل وظائف الطباعة الى الطابعات." #: ../../keyboard.pm:1 #, c-format msgid "Irish" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Sunday" msgstr "الأحد" #: ../../standalone/drakconnect:1 #, c-format msgid "Internet Connection Configuration" msgstr "إعدادات الإتصال بالإنترنت" #: ../../modules/parameters.pm:1 #, c-format msgid "comma separated numbers" msgstr "أرقام مفصولة بالفاصلة" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Once you've selected a device, you'll be able to see the device information " "in fields displayed on the right frame (\"Information\")" msgstr "" "عند اختيارك لجهاز, ستستطيع رؤية معلومات تاجهاز في الحقول المعروضة في الإطار " "الأيمن (\"معلومات\")" #: ../../standalone/drakperm:1 #, c-format msgid "Move selected rule up one level" msgstr "انقل القاعدة المختارة الى فوق بمستوى واحد" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "The following scanner\n" "\n" "%s\n" "is available on your system.\n" msgstr "" "الماسحة الضوئية التالية\n" "\n" "%s\n" "متوفرة لنظامك.\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do you really want to remove the printer \"%s\"?" msgstr "هل تريد فعلاً حذف الطابعة \"%s\"؟" #: ../../install_interactive.pm:1 #, c-format msgid "I can't find any room for installing" msgstr "لا يمكنني ايجاد مساحة فارغة للتثبيت" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Default printer" msgstr "الطابعة الإفتراضية" #: ../../network/netconnect.pm:1 #, c-format msgid "" "You have configured multiple ways to connect to the Internet.\n" "Choose the one you want to use.\n" "\n" msgstr "" "لقد قمت بتهيئة طرق متعددة للإتصال بالإنترنت.\n" "اختر الطريقة التي تريد استخدامها.\n" "\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Modify RAID" msgstr "تعديل RAID" #: ../../network/isdn.pm:1 #, c-format msgid "" "I have detected an ISDN PCI card, but I don't know its type. Please select a " "PCI card on the next screen." msgstr "" "تم اكتشاف بطاقة ISDN PCI, لكن لم يتم التعرف على نوعها. فضلاً اختر بطاقة PCI " "في الشاشة التالية." #: ../../any.pm:1 #, c-format msgid "Add user" msgstr "اضف مستخدم" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "RAID-disks %s\n" msgstr "أقراص RAID %s\n" #: ../../lang.pm:1 #, c-format msgid "Liberia" msgstr "ليبريا" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "Could not install the packages needed to set up a scanner with Scannerdrake." msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "Please enter the name of the interface connected to the internet.\n" "\n" "Examples:\n" "\t\tppp+ for modem or DSL connections, \n" "\t\teth0, or eth1 for cable connection, \n" "\t\tippp+ for a isdn connection.\n" msgstr "" "فضلاً أدخل اسم الواجهة المتصلة بالإنترنت.\n" "\n" "أمثلة:\n" "\t\tppp+ لوصلات المودم و DSL, \n" "\t\teth0, أو eth1 لوصلات الكيبل, \n" "\t\tippp+ لوصلات ISDN.\n" #: ../../steps.pm:1 #, c-format msgid "Choose your keyboard" msgstr "اختر لوحة المفاتيح الخاصة بك" #: ../../steps.pm:1 #, c-format msgid "Format partitions" msgstr "تجهيز التجزئات" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Automatic correction of CUPS configuration" msgstr "تصحيح آلي لتهيئة CUPS" #: ../../standalone/harddrake2:1 #, c-format msgid "Running \"%s\" ..." msgstr "جاري تشغيل \"%s\" ..." #: ../../harddrake/v4l.pm:1 #, c-format msgid "enable radio support" msgstr "تمكين دعم الراديو" #: ../../standalone/scannerdrake:1 #, c-format msgid "Scanner sharing to hosts: " msgstr "مشاركة الطابعات على المستضيفات: " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Loopback file name: %s" msgstr "اسم ملف Loopback: %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Please choose the printer to which the print jobs should go." msgstr "رجاء اختر الطابعة التي ستذهب اليها وظائف الطباعة." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do not transfer printers" msgstr "لا تنقل الطابعات" #: ../../help.pm:1 #, c-format msgid "Delay before booting the default image" msgstr "توقيت ما قبل اقلاع الصورة الافتراضية" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Hard Disk to backup" msgstr "استخدم القرص الصلب للنسخ الإحتياطي" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/drakboot:1 #, c-format msgid "Configure" msgstr "إعداد" #: ../../standalone/scannerdrake:1 #, c-format msgid "Scannerdrake" msgstr "Scannerdrake" #: ../../standalone/drakconnect:1 #, c-format msgid "" "Warning, another Internet connection has been detected, maybe using your " "network" msgstr "تحذير, تم ايجاد اتصال إنترنت آخر, ربما يكون يستخدم شبكتك" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup Users" msgstr "مستخدمو المساعد" #: ../../network/network.pm:1 #, c-format msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one." msgstr "" "فضلاً أدخل اسم المستضيف.\n" "يجب أن يكون اسم المستضيف صالحاً و كاملاً,\n" "مثل ``mybox.mylab.myco.com''.\n" "يمكنك أيضاً ادخال عنوان IP الخاص بالبوابة ان وُجدت." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Select Printer Spooler" msgstr "اختر Printer Spooler" #: ../../standalone/drakboot:1 #, c-format msgid "Create new theme" msgstr "انشئ سمة جديدة" #: ../../standalone/logdrake:1 #, c-format msgid "Mandrake Tools Explanation" msgstr "شروح أدوات Mandrake" # #: ../../standalone/drakpxe:1 #, c-format msgid "No image found" msgstr "تعذر ايجاد صورة" #: ../../install_steps.pm:1 #, c-format msgid "" "Some important packages didn't get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm" "\"\n" msgstr "" "لم يتم تثبيت بعض الحزم المهمة بشل صحيح.\n" "إما أن سواقة القرص المدمج أو أن القرص المدمج نفسه به عيب ما.\n" "تأكد من صحة القرص المدمج على كمبيوتر مثبّت باستخدام الأمر \"rpm -qpl Mandrake/" "RPMS/*.rpm\"\n" #: ../advertising/06-development.pl:1 #, c-format msgid "Mandrake Linux 9.2: the ultimate development platform" msgstr "Mandrake Linux 9.2 هي البيئة الأمثل لتطوير البرامج" #: ../../standalone/scannerdrake:1 #, c-format msgid "Detected model: %s" msgstr "تم اكتشاف الطراز: %s" #: ../../standalone/logdrake:1 #, c-format msgid "\"%s\" is not a valid email!" msgstr "" #: ../../standalone/drakedm:1 #, c-format msgid "" "X11 Display Manager allows you to graphically log\n" "into your system with the X Window System running and supports running\n" "several different X sessions on your local machine at the same time." msgstr "" "مدير عرض X11 يسمح لك بتسجيل الدخول الى\n" "نظامك مع تشغيل خادم النوافذ X و يدعم تشغيل\n" "عدة جلسات X مختلفة على ماكينتك المحلية في نفس الوقت." #: ../../security/help.pm:1 #, c-format msgid "if set to yes, run the daily security checks." msgstr "if set to yes, run the daily security checks" #: ../../lang.pm:1 #, c-format msgid "Azerbaijan" msgstr "أذربيجان" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Device name to use for backup" msgstr "فضلاً أدخل اسم جهاز النسخ الإحتياطي" #: ../../standalone/drakbackup:1 #, c-format msgid "No tape in %s!" msgstr "لا يوجد شريط في %s!" #: ../../standalone/drakhelp:1 #, c-format msgid "" " --doc - link to another web page ( for WM welcome " "frontend)\n" msgstr "" # U+200F (RTL mark) has been inserted between "Dvorak" and "(US)", so # it displays on screen as "(US) Dvorak", following the same schema # as others "Dvorak (xxxx)" with xxx in Arabic that display as "(xxxx) Dvorak" # that way the entry is also listed together with the other "Dvorak" entries. #: ../../keyboard.pm:1 #, c-format msgid "Dvorak (US)" msgstr "Dvorak‏ (US)" #: ../../standalone/harddrake2:1 #, c-format msgid "" "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" msgstr "" "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "How is the printer connected?" msgstr "ما هي طريقة توصيل الطابعة؟" #: ../../security/level.pm:1 #, c-format msgid "Security level" msgstr "مستوى الأمن" #: ../../standalone/draksplash:1 #, c-format msgid "final resolution" msgstr "دقة العرض النهائية" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1 #, c-format msgid "Services" msgstr "الخدمات" #: ../../../move/move.pm:1 #, fuzzy, c-format msgid "Auto configuration" msgstr "تهيئة مخصصة" #: ../../Xconfig/card.pm:1 #, c-format msgid "4 MB" msgstr "4 ميغابايت" #: ../../share/compssUsers:999 msgid "Office Workstation" msgstr "محطة عمل مكتبية" #: ../../share/compssUsers:999 msgid "" "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, " "gnumeric), pdf viewers, etc" msgstr "" "برامج مكتبية: معالجة الكلمات (kword, abiword), الجداول الحسابية (kspread, " "gnumeric) , برامج عرض pdf, الخ" #: ../../share/compssUsers:999 msgid "Game station" msgstr "محطة ألعاب" #: ../../share/compssUsers:999 msgid "Amusement programs: arcade, boards, strategy, etc" msgstr "برامج التسلية: ألعاب فيديو, ألعاب لوحات, ألعاب ستراتيجية, الخ" #: ../../share/compssUsers:999 msgid "Multimedia station" msgstr "محطة وسائط متعددة" #: ../../share/compssUsers:999 msgid "Sound and video playing/editing programs" msgstr "برامج تحرير/تشغيل الفيديو و الصوت" #: ../../share/compssUsers:999 msgid "Internet station" msgstr "محطة انترنت" #: ../../share/compssUsers:999 #, fuzzy msgid "" "Set of tools to read and send mail and news (mutt, tin..) and to browse the " "Web" msgstr "" "مجموعة من الأدوات لقراءة و ارسال البريد و الأخبار (pine, mutt, tin..) و " "لتصفح الإنترنت" #: ../../share/compssUsers:999 msgid "Network Computer (client)" msgstr "جهاز شبكة (عميل)" #: ../../share/compssUsers:999 msgid "Clients for different protocols including ssh" msgstr "عملاء لبروتوكولات مختلفة مثل ssh" #: ../../share/compssUsers:999 msgid "Configuration" msgstr "أدوات الإعدادات" #: ../../share/compssUsers:999 msgid "Tools to ease the configuration of your computer" msgstr "أدوات لتسهيل إعداد جهازك" #: ../../share/compssUsers:999 msgid "Scientific Workstation" msgstr "محطة عمل علمية" #: ../../share/compssUsers:999 msgid "Scientific applications such as gnuplot" msgstr "تطبيقات علمية مثل gnuplot" #: ../../share/compssUsers:999 msgid "Console Tools" msgstr "أدوات سطر الأوامر" #: ../../share/compssUsers:999 msgid "Editors, shells, file tools, terminals" msgstr "محررات نصوص, أغلفة, أدوات ملفات, طرفيات" #: ../../share/compssUsers:999 msgid "KDE Workstation" msgstr "محطو عمل كيدي" #: ../../share/compssUsers:999 msgid "" "The K Desktop Environment, the basic graphical environment with a collection " "of accompanying tools" msgstr "" "بيئة سطح مكتب كيدي, البيئة الرسومية الأساسية مع مجموعة من الأدوات المصاحبة" #: ../../share/compssUsers:999 msgid "Gnome Workstation" msgstr "محطة عمل جنوم" #: ../../share/compssUsers:999 msgid "" "A graphical environment with user-friendly set of applications and desktop " "tools" msgstr "" "بيئة رسومية مع مجموعة من التطبيقات و أدوات سطح المكتب المناسبة للمستخدمين " "العاديين" #: ../../share/compssUsers:999 msgid "Other Graphical Desktops" msgstr "أسطخ مكتب رسومية أخرى" #: ../../share/compssUsers:999 msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "Icewm, Window Maker, Enlightenment, Fvwm, الخ" #: ../../share/compssUsers:999 msgid "C and C++ development libraries, programs and include files" msgstr "برامج و مكتبات تطوير C و C++" #: ../../share/compssUsers:999 msgid "Documentation" msgstr "وثائق المساعدة" #: ../../share/compssUsers:999 msgid "Books and Howto's on Linux and Free Software" msgstr "كتب و مذكرات 'كيف أعمل' حول Linux و البرامج الحرة" #: ../../share/compssUsers:999 msgid "LSB" msgstr "LSB" #: ../../share/compssUsers:999 msgid "Linux Standard Base. Third party applications support" msgstr "Linux Standard Base. Third party applications support" #: ../../share/compssUsers:999 msgid "Web/FTP" msgstr "ويب/FTP" #: ../../share/compssUsers:999 msgid "Apache, Pro-ftpd" msgstr "Apache, Pro-ftpd" #: ../../share/compssUsers:999 msgid "Mail" msgstr "بريد" #: ../../share/compssUsers:999 msgid "Postfix mail server" msgstr "خادم البريد Postfix" #: ../../share/compssUsers:999 msgid "Database" msgstr "قواعد البيانات" #: ../../share/compssUsers:999 msgid "PostgreSQL or MySQL database server" msgstr "خادم قواعد البيانات PostgreSQL أو MySQL" #: ../../share/compssUsers:999 msgid "Firewall/Router" msgstr "جدار ناري/موجِّه" #: ../../share/compssUsers:999 msgid "Internet gateway" msgstr "بوابة انترنت" #: ../../share/compssUsers:999 msgid "DNS/NIS " msgstr "DNS/NIS" #: ../../share/compssUsers:999 msgid "Domain Name and Network Information Server" msgstr "خادم أسماء النطاثات و معلومات الشيكة" #: ../../share/compssUsers:999 msgid "Network Computer server" msgstr "خادم شبكات" #: ../../share/compssUsers:999 msgid "NFS server, SMB server, Proxy server, ssh server" msgstr "خادم NFS, خادم SMB, خادم بروكسي, خادم ssh" #: ../../share/compssUsers:999 msgid "Set of tools to read and send mail and news and to browse the Web" msgstr "مجموعة من الأدوات لقراءة و ارسال البريد و الأخبار و تصفح الإنترنت" #~ msgid "The setup has already been done, and it's currently enabled." #~ msgstr "تم عمل التنصيب, و هو ممكَّن الآن." #~ msgid "Logs" #~ msgstr "السجلات" #~ msgid "The setup has already been done, but it's currently disabled." #~ msgstr "تم عمل التنصيب, و لكنه غير ممكَّن الآن" #~ msgid "Profile " #~ msgstr "التشكيل:" #~ msgid "" #~ "Welcome to the Internet Connection Sharing utility!\n" #~ "\n" #~ "%s\n" #~ "\n" #~ "Click on Configure to launch the setup wizard." #~ msgstr "" #~ "أهلا بك في أداة مشاركة الإتصال بالإنترنت!\n" #~ "\n" #~ "%s\n" #~ "\n" #~ "اضغط على تهيئة لتشغيل معالج الإعداد." #~ msgid "Internet Connection Sharing configuration" #~ msgstr "إعدادات مشاركة إتصال الإنترنت" #~ msgid "No Internet Connection Sharing has ever been configured." #~ msgstr "لم يتم اعداد أي مشاركة اتصال بالإنترنت" #~ msgid "when checked, owner and group won't be changed" #~ msgstr "عند التأشير لن يتم تغيير المالك و المجموعة" #~ msgid "" #~ "XawTV isn't installed!\n" #~ "\n" #~ "\n" #~ "If you do have a TV card but DrakX has neither detected it (no bttv nor " #~ "saa7134\n" #~ "module in \"/etc/modules\") nor installed xawtv, please send the\n" #~ "results of \"lspcidrake -v -f\" to \"install@mandrakesoft.com\"\n" #~ "with subject \"undetected TV card\".\n" #~ "\n" #~ "\n" #~ "You can install it by typing \"urpmi xawtv\" as root, in a console." #~ msgstr "" #~ "XawTV غير مثبّت!\n" #~ "\n" #~ "\n" #~ "اذا كانت لديك بطاقة تلفاز لكن لم يستطع DrakX اكتشافها (لا توجد وحدات bttv " #~ "ولا saa7134\n" #~ "في \"/etc/modules\") أو لم تثبّت xawtv, فضلاً قم بإرسال نتائج\n" #~ "الأمر \"lspcidrake -v -f\" الى \"install@mandrakesoft.com\"\n" #~ "مع العنوان \"undetected TV card\".\n" #~ "\n" #~ "\n" #~ "يمكنك تثبيت XawTV بكتابة الأمر \"urpmi xawtv\" كمستخدم جذر في سطر الأوامر." #~ msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*" #~ msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*" #~ msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" #~ msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" #~ msgid "Hostname configuration" #~ msgstr "تهيئة اسم المستضيف" #~ msgid "Hostname" #~ msgstr "اسم المستضيف" #~ msgid "Remote Printers" #~ msgstr "الطابعات البعيدة" #~ msgid "Printing system: " #~ msgstr "نظام الطباعة: " #, fuzzy #~ msgid "Level 1" #~ msgstr "المستوى" #, fuzzy #~ msgid "Level 2" #~ msgstr "المستوى" #, fuzzy #~ msgid "Level 3" #~ msgstr "المستوى" #, fuzzy #~ msgid "Level 4" #~ msgstr "المستوى" #, fuzzy #~ msgid "Level 5" #~ msgstr "المستوى" #, fuzzy #~ msgid "Insert floppy and press %s" #~ msgstr "أدخل قرص مرن في %s" #~ msgid "Load" #~ msgstr "حمل" #~ msgid "" #~ "Monitor\n" #~ "\n" #~ " The installer will normally automatically detect and configure the\n" #~ "monitor connected to your machine. If it is correct, you can choose from\n" #~ "this list the monitor you actually have connected to your computer." #~ msgstr "" #~ "الشاشة\n" #~ "\n" #~ " يمكن لبرنامج التثبيت اكتشاف و تهيئة الشاشة المتصلة بماكينتك\n" #~ "آلياً. ان لم يصل ذلك, يمكنك اختيار الشاشة التي لديك\n" #~ "من القائمة." #~ msgid "Bad Ip" #~ msgstr "IP سيئ" #~ msgid "Output" #~ msgstr "الناتج" #~ msgid "Please relog into %s to activate the changes" #~ msgstr "يرجى اعادة تسجيل الدخول الى %s لتنشيط التغييرات" #~ msgid "" #~ "Description:\n" #~ "\n" #~ " Drakbackup is used to backup your system.\n" #~ " During the configuration you can select: \n" #~ "\t- System files, \n" #~ "\t- Users files, \n" #~ "\t- Other files.\n" #~ "\tor All your system ... and Other (like Windows Partitions)\n" #~ "\n" #~ " Drakbackup allows you to backup your system on:\n" #~ "\t- Harddrive.\n" #~ "\t- NFS.\n" #~ "\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n" #~ "\t- FTP.\n" #~ "\t- Rsync.\n" #~ "\t- Webdav.\n" #~ "\t- Tape.\n" #~ "\n" #~ " Drakbackup allows you to restore your system to\n" #~ " a user selected directory.\n" #~ "\n" #~ " Per default all backups will be stored on your\n" #~ " /var/lib/drakbackup directory\n" #~ "\n" #~ " Configuration file:\n" #~ "\t/etc/drakconf/drakbackup/drakbackup.conf\n" #~ "\n" #~ "Restore Step:\n" #~ " \n" #~ " During the restore step, DrakBackup will remove \n" #~ " your original directory and verify that all \n" #~ " backup files are not corrupted. It is recommended \n" #~ " you do a last backup before restoring.\n" #~ "\n" #~ "\n" #~ msgstr "" #~ "Description:\n" #~ "\n" #~ " Drakbackup is used to backup your system.\n" #~ " During the configuration you can select: \n" #~ "\t- System files, \n" #~ "\t- Users files, \n" #~ "\t- Other files.\n" #~ "\tor All your system ... and Other (like Windows Partitions)\n" #~ "\n" #~ " Drakbackup allows you to backup your system on:\n" #~ "\t- Harddrive.\n" #~ "\t- NFS.\n" #~ "\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n" #~ "\t- FTP.\n" #~ "\t- Rsync.\n" #~ "\t- Webdav.\n" #~ "\t- Tape.\n" #~ "\n" #~ " Drakbackup allows you to restore your system to\n" #~ " a user selected directory.\n" #~ "\n" #~ " Per default all backups will be stored on your\n" #~ " /var/lib/drakbackup directory\n" #~ "\n" #~ " Configuration file:\n" #~ "\t/etc/drakconf/drakbackup/drakbackup.conf\n" #~ "\n" #~ "Restore Step:\n" #~ " \n" #~ " During the restore step, DrakBackup will remove \n" #~ " your original directory and verify that all \n" #~ " backup files are not corrupted. It is recommended \n" #~ " you do a last backup before restoring.\n" #~ "\n" #~ "\n" #~ msgid "" #~ "Options Description:\n" #~ "\n" #~ " - Backup System Files:\n" #~ " \n" #~ "\tThis option allows you to backup your /etc directory,\n" #~ "\twhich contains all configuration files. Please be\n" #~ "\tcareful during the restore step to not overwrite:\n" #~ "\t\t/etc/passwd \n" #~ "\t\t/etc/group \n" #~ "\t\t/etc/fstab\n" #~ "\n" #~ " - Backup User Files: \n" #~ "\n" #~ "\tThis option allows you select all users that you want to \n" #~ "\tbackup. To preserve disk space, it is recommended that\n" #~ "\tyou do not include the web browser's cache.\n" #~ "\n" #~ " - Backup Other Files: \n" #~ "\n" #~ "\tThis option allows you to include additional data to save.\n" #~ "\tIf you want to add individual files, select them from the\n" #~ "\trighthand 'Files' list pane. To add directories, enter the \n" #~ "\tdirectory by clicking on it in the lefthand 'Folders' pane, \n" #~ "\tand at that point click 'OK' without selecting any files.\n" #~ " \n" #~ " - Incremental Backups:\n" #~ "\n" #~ "\tThe incremental backup is the most powerful option for \n" #~ "\tbackup. This option allows you to backup all your data \n" #~ "\tthe first time, and only the changed data afterward.\n" #~ "\tThen you will be able, during the restore step, to restore \n" #~ "\tyour data from a specified date. If you have not selected \n" #~ "\tthis option all old backups are deleted before each backup. \n" #~ "\n" #~ " - Differential Backups:\n" #~ " \n" #~ "\tThe differential backup, rather than comparing changes in the\n" #~ "\tdata to the previous incremental backup, always compares the\n" #~ "\tdata to the initial base backup. This method allows one to\n" #~ "\trestore the base and then the differential from a certain date.\n" #~ "\n" #~ msgstr "" #~ "Options Description:\n" #~ "\n" #~ " - Backup System Files:\n" #~ " \n" #~ "\tThis option allows you to backup your /etc directory,\n" #~ "\twhich contains all configuration files. Please be\n" #~ "\tcareful during the restore step to not overwrite:\n" #~ "\t\t/etc/passwd \n" #~ "\t\t/etc/group \n" #~ "\t\t/etc/fstab\n" #~ "\n" #~ " - Backup User Files: \n" #~ "\n" #~ "\tThis option allows you select all users that you want to \n" #~ "\tbackup. To preserve disk space, it is recommended that\n" #~ "\tyou do not include the web browser's cache.\n" #~ "\n" #~ " - Backup Other Files: \n" #~ "\n" #~ "\tThis option allows you to include additional data to save.\n" #~ "\tIf you want to add individual files, select them from the\n" #~ "\trighthand 'Files' list pane. To add directories, enter the \n" #~ "\tdirectory by clicking on it in the lefthand 'Folders' pane, \n" #~ "\tand at that point click 'OK' without selecting any files.\n" #~ " \n" #~ " - Incremental Backups:\n" #~ "\n" #~ "\tThe incremental backup is the most powerful option for \n" #~ "\tbackup. This option allows you to backup all your data \n" #~ "\tthe first time, and only the changed data afterward.\n" #~ "\tThen you will be able, during the restore step, to restore \n" #~ "\tyour data from a specified date. If you have not selected \n" #~ "\tthis option all old backups are deleted before each backup. \n" #~ "\n" #~ " - Differential Backups:\n" #~ " \n" #~ "\tThe differential backup, rather than comparing changes in the\n" #~ "\tdata to the previous incremental backup, always compares the\n" #~ "\tdata to the initial base backup. This method allows one to\n" #~ "\trestore the base and then the differential from a certain date.\n" #~ "\n" #~ msgid "Please check if you want to use the non-rewinding device." #~ msgstr "" #~ "فضلا قم بالتأشير هنا اذا كنت تريد استخدام جهاز غير قابل للرجوع الى الخلف." #~ msgid "Please enter your password" #~ msgstr "رجاء كلمة المرور" #~ msgid "" #~ "\n" #~ " Some errors during sendmail are caused by \n" #~ " a bad configuration of postfix. To solve it you have to\n" #~ " set myhostname or mydomain in /etc/postfix/main.cf\n" #~ "\n" #~ msgstr "" #~ "\n" #~ " بعض أخطاء sendmail يكون سببها \n" #~ " تهيئة سيئة من postfix. لحل هذا المشكلة عليك\n" #~ " تعيين myhostname أو mydomain في ملف /etc/postfix/main.cf\n" #~ "\n" #~ msgid "" #~ "Please choose your CD/DVD device\n" #~ "(Press Enter to propogate settings to other fields.\n" #~ "This field isn't necessary, only a tool to fill in the form.)" #~ msgstr "" #~ "فضلاً اختر جهاز CD/DVD الخاص بك\n" #~ "(اضغط ادخال لنشر الإعدادات لحقول أخرى.\n" #~ "هذا الحقل ليس ضرورياً, انه مجرد أداة لملء الإستمارة.)" # c-format #~ msgid "Please check if you want to eject your tape after the backup." #~ msgstr "فضلا قم بالتأشير هنا اذا كنت تريد اخراج الشريط بعد النسخ الإحتياطي." #~ msgid "Please check if you want to erase your tape before the backup." #~ msgstr "فضلا قم بالتأشير هنا اذا كنت تريد مسح الشريط قبل النسخ الإحتياطي." #~ msgid "Please enter the host name or IP." #~ msgstr "فضلا أدخل اسم المستضيف أو عنوان IP." #~ msgid "" #~ " Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien " #~ msgstr "" #~ " جميع الحقوق محفوظة (C) 2001 MandrakeSoft من دوبون سيباستيان " #~ "" #~ msgid "" #~ "Options Description:\n" #~ "\n" #~ "Please be careful when you are using ftp backup, because only \n" #~ "backups that are already built are sent to the server.\n" #~ "So at the moment, you need to build the backup on your hard \n" #~ "drive before sending it to the server.\n" #~ "\n" #~ msgstr "" #~ "وصف الخيارات:\n" #~ "\n" #~ "من فضلك كن حذراً عند استخدام النسخ الإحتياطي عبر FTP, لأن \n" #~ "النسخ المبنية مسبقاً فقط هي التي يتم ارسالها الى الخادم.\n" #~ "لذا فالآن عليك أن تبني النسخة الإحتياطية على القرص \n" #~ "الصلب قبل ارسالها الى الخادم.\n" #~ "\n" #~ msgid "" #~ "\n" #~ "Restore Backup Problems:\n" #~ "\n" #~ "During the restore step, Drakbackup will verify all your\n" #~ "backup files before restoring them.\n" #~ "Before the restore, Drakbackup will remove \n" #~ "your original directory, and you will loose all your \n" #~ "data. It is important to be careful and not modify the \n" #~ "backup data files by hand.\n" #~ msgstr "" #~ "\n" #~ "مشاكل استعادة النسخ الإحتياطية:\n" #~ "\n" #~ "أثناء خطوة التثبيت, سيقوم Drakbackup بالتأكد من كل ملفات\n" #~ "النسخ الإحتياطي قبل استعادتها.\n" #~ "قبل الإستعادة سيقوم drakbackup بحذف \n" #~ "الدليل الأصلي و ستخسر كل البيانات التي \n" #~ "عليه. من المهم أن تكون حذراً و لا تقوم بتعديل \n" #~ "بيانات النسخ الإحتياطي يدوياً.\n" #~ msgid "" #~ " updates 2002 MandrakeSoft by Stew Benedict " #~ msgstr "" #~ " تحديثات 2002 MandrakeSoft من Stew Benedict " #~ msgid "" #~ "Arguments: (arg, expr='*.*', dev='tty12')\n" #~ "\n" #~ "Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n" #~ "expression describing what to log (see syslog.conf(5) for more details) " #~ "and\n" #~ "dev the device to report the log." #~ msgstr "" #~ "Arguments: (arg, expr='*.*', dev='tty12')\n" #~ "\n" #~ "Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n" #~ "expression describing what to log (see syslog.conf(5) for more details) " #~ "and\n" #~ "dev the device to report the log." #~ msgid "edit" #~ msgstr "حرّر" #~ msgid "" #~ "Arguments: (arg)\n" #~ "\n" #~ " Accept/Refuse broadcasted icmp echo." #~ msgstr "" #~ "Arguments: (arg)\n" #~ "\n" #~ " Accept/Refuse broadcasted icmp echo." #~ msgid "" #~ "Arguments: (arg)\n" #~ "\n" #~ "Enable/Disable libsafe if libsafe is found on the system." #~ msgstr "" #~ "Arguments: (arg)\n" #~ "\n" #~ "Enable/Disable libsafe if libsafe is found on the system." #~ msgid "" #~ "Arguments: (arg)\n" #~ "\n" #~ "Allow/Forbid remote root login." #~ msgstr "" #~ "Arguments: (arg)\n" #~ "\n" #~ "Allow/Forbid remote root login." #~ msgid "select perm file to see/edit" #~ msgstr "اختر ملف تصاريح لرؤيته/تحريره" #~ msgid "path" #~ msgstr "المسار" #~ msgid "" #~ "Arguments: (arg)\n" #~ "\n" #~ "Enable/Disable the logging of IPv4 strange packets." #~ msgstr "" #~ "Arguments: (arg)\n" #~ "\n" #~ "Enable/Disable the logging of IPv4 strange packets." #~ msgid "" #~ "Arguments: (arg, alert=1)\n" #~ "\n" #~ "Enable/Disable IP spoofing protection." #~ msgstr "" #~ "Arguments: (arg, alert=1)\n" #~ "\n" #~ "Enable/Disable IP spoofing protection." #~ msgid "permissions" #~ msgstr "التصاريح" #~ msgid "" #~ "Arguments: (arg)\n" #~ "\n" #~ "Enable/Disable msec hourly security check." #~ msgstr "" #~ "Arguments: (arg)\n" #~ "\n" #~ "Enable/Disable msec hourly security check." #~ msgid "delete" #~ msgstr "حذف" #~ msgid "" #~ "Arguments: (arg)\n" #~ "\n" #~ "Accept/Refuse bogus IPv4 error messages." #~ msgstr "" #~ "Arguments: (arg)\n" #~ "\n" #~ "Accept/Refuse bogus IPv4 error messages." #~ msgid "" #~ "Arguments: (arg)\n" #~ "\n" #~ "Use password to authenticate users." #~ msgstr "" #~ "Arguments: (arg)\n" #~ "\n" #~ "Use password to authenticate users." #~ msgid "user" #~ msgstr "المستخدم" #~ msgid "" #~ "Standard: This is the standard security recommended for a computer that " #~ "will be used to connect\n" #~ " to the Internet as a client.\n" #~ "\n" #~ "High: There are already some restrictions, and more automatic " #~ "checks are run every night.\n" #~ "\n" #~ "Higher: The security is now high enough to use the system as a server " #~ "which can accept\n" #~ " connections from many clients. If your machine is only a " #~ "client on the Internet, you\n" #~ " should choose a lower level.\n" #~ "\n" #~ "Paranoid: This is similar to the previous level, but the system is " #~ "entirely closed and security\n" #~ " features are at their maximum\n" #~ "\n" #~ "Security Administrator:\n" #~ " If the 'Security Alerts' option is set, security alerts " #~ "will be sent to this user (username or\n" #~ " email)" #~ msgstr "" #~ "قياسي: هذا هو المستوى القياسي المنصوح به لكمبيوتر يقوم بالإتصال\n" #~ " بالإنترنت كعميل.\n" #~ "\n" #~ "مرتفع: توجد بعض القيود مسبقاً, و بعض الإختبارات يتم تشغيلها آلياً عند " #~ "كل ليلة.\n" #~ "\n" #~ "مرتقع أكثر: المستوى الأمني عالٍ بشكل كافٍ لاستخدام النظام كخادم يستطيع " #~ "أن يقبل\n" #~ " الإتصالات من عملاء كثيرين. اذا كان حاسبك مجرد عميل على " #~ "الإنترنت\n" #~ "\t فيجب عليك اختيار مستوى أقل.\n" #~ "\n" #~ "مرتقع جداً: هذا يماثل المستوى السابق, لكن النظام في هذه الحال يكون مغلقاً و " #~ "المزايا\n" #~ " الأمنية تكون على أقصى حد\n" #~ "\n" #~ "مدير الأمن:\n" #~ " اذا كان خيار 'التنبيهات الأمنية' مختاراً, فسيتم ارسال " #~ "تنبيهات أمنية الى المستخدم (بإسم المستخدم\n" #~ "\t أو البريد الألكتروني)" #~ msgid "Expert Area" #~ msgstr "منطقة الخبراء" #~ msgid "Wizard..." #~ msgstr "المعالج..." #~ msgid " / Region" #~ msgstr " / المنطقة" #~ msgid "Country" #~ msgstr "البلد" #~ msgid "Previous" #~ msgstr "السابق" #~ msgid "" #~ "Options Description:\n" #~ "\n" #~ " In this step Drakbackup allow you to change:\n" #~ "\n" #~ " - The compression mode:\n" #~ " \n" #~ " If you check bzip2 compression, you will compress\n" #~ " your data better than gzip (about 2-10 %%).\n" #~ " This option is not checked by default because\n" #~ " this compression mode needs more time (about 1000%% more).\n" #~ " \n" #~ " - The update mode:\n" #~ "\n" #~ " This option will update your backup, but this\n" #~ " option is not really useful because you need to\n" #~ " decompress your backup before you can update it.\n" #~ " \n" #~ " - the .backupignore mode:\n" #~ "\n" #~ " Like with cvs, Drakbackup will ignore all references\n" #~ " included in .backupignore files in each directories.\n" #~ " ex: \n" #~ " #> cat .backupignore\n" #~ " *.o\n" #~ " *~\n" #~ " ...\n" #~ " \n" #~ "\n" #~ msgstr "" #~ "Options Description:\n" #~ "\n" #~ " In this step Drakbackup allow you to change:\n" #~ "\n" #~ " - The compression mode:\n" #~ " \n" #~ " If you check bzip2 compression, you will compress\n" #~ " your data better than gzip (about 2-10 %%).\n" #~ " This option is not checked by default because\n" #~ " this compression mode needs more time (about 1000%% more).\n" #~ " \n" #~ " - The update mode:\n" #~ "\n" #~ " This option will update your backup, but this\n" #~ " option is not really useful because you need to\n" #~ " decompress your backup before you can update it.\n" #~ " \n" #~ " - the .backupignore mode:\n" #~ "\n" #~ " Like with cvs, Drakbackup will ignore all references\n" #~ " included in .backupignore files in each directories.\n" #~ " ex: \n" #~ " #> cat .backupignore\n" #~ " *.o\n" #~ " *~\n" #~ " ...\n" #~ " \n" #~ "\n" #~ msgid "help" #~ msgstr "مساعدة" #~ msgid "Please check if you are using CDRW media" #~ msgstr "فضلا قم بالتأشير هنا اذا كنت تستخدم وسيط CDRW" #~ msgid "Please check if you are using a DVDRAM device" #~ msgstr "فضلا قم بالتأشير هنا اذا كنت تستخدم جهاز DVDRAM" #~ msgid "Please check if you are using a DVDR device" #~ msgstr "فضلا قم بالتأشير هنا اذا كنت تستخدم جهاز DVDR" #~ msgid "Please check for multisession CD" #~ msgstr "فضلا قم بالتأشير هنا اذا كنت تستخدم قرص مدمج متعدد الجلسات" #~ msgid "Version: %s\n" #~ msgstr "الإصدار: %s\n" #~ msgid "Importance: %s\n" #~ msgstr "الأهمية: %s\n" #~ msgid "" #~ "Which dhcp client do you want to use?\n" #~ "Default is dhcp-client." #~ msgstr "" #~ "أي عميل DHCP تريد أن تستخدم؟\n" #~ "الإفتراضي هو dhcp-client." #~ msgid "We are now going to configure the %s connection." #~ msgstr "نحن الآن سنقوم بتهيئة الوصلة %s." #~ msgid "Name: %s\n" #~ msgstr "الإسم: %s\n" #~ msgid "Size: %d KB\n" #~ msgstr "الحجم: %d كيلوبايت\n" #~ msgid "" #~ "Which ISDN configuration do you prefer?\n" #~ "\n" #~ "* The Old configuration uses isdn4net. It contains powerful\n" #~ " tools, but is tricky to configure, and not standard.\n" #~ "\n" #~ "* The New configuration is easier to understand, more\n" #~ " standard, but with less tools.\n" #~ "\n" #~ "We recommand the light configuration.\n" #~ msgstr "" #~ "ما هي تهيئة ISDN التي تفضلها؟\n" #~ "\n" #~ "* التهيئة القديمة تستخدم isdn4net. و هي تحتوي على أدوات\n" #~ " قوية و لكنها صعبة التهيئة, و غير قياسية.\n" #~ "\n" #~ "* التهيئة الجديدة أسهل في الفهم, و أكثر\n" #~ " قياسية, و لكن مع أدوات أقل.\n" #~ "\n" #~ "نحن نفضّل لك التهيئة الخفيفة.\n" #~ msgid "New configuration (isdn-light)" #~ msgstr "إعداد جديد (isdn-light)" #~ msgid "Old configuration (isdn4net)" #~ msgstr "إعداد قديم (isdn4net)" #~ msgid "Internet connection & configuration" #~ msgstr "وصلة الإنترنت و الإعدادات" #~ msgid "Disconnect" #~ msgstr "اقطع الإتصال" #~ msgid "Connect" #~ msgstr "اتصل" #~ msgid "" #~ "\n" #~ "You can reconfigure your connection." #~ msgstr "" #~ "\n" #~ "يمكنك اعادة تهيئة الوصلة." #~ msgid "" #~ "\n" #~ "You can connect to the Internet or reconfigure your connection." #~ msgstr "" #~ "\n" #~ "يمكنك الآن الإتصال بالإنترنت أو اعادة تهيئة الوصلة." #~ msgid "You are not currently connected to the Internet." #~ msgstr "أنت لست متصل بالإنترنت حالياً" #~ msgid "" #~ "\n" #~ "You can disconnect or reconfigure your connection." #~ msgstr "" #~ "\n" #~ "يمكنك قطع الإتصال أو اعادة تهيئة الوصلة." #~ msgid "You are currently connected to the Internet." #~ msgstr "أنت متصل بالإنترنت حالياً" #~ msgid "files sending by FTP" #~ msgstr "ارسال الملفات عن طريق FTP" #~ msgid "Use incremental backup (do not replace old backups)" #~ msgstr "استخدم النسخ التراكمي (لا تستبدل النسخ الإحتياطية القديمة)" #~ msgid "Relaunch 'lilo'" #~ msgstr "أعد تشغيل 'lilo'" #~ msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'." #~ msgstr "اجعل initrd 'mkinitrd -f /boot/initrd-%s.img %s'." #~ msgid "Copy %s to %s" #~ msgstr "انسخ %s الى %s" #~ msgid "Backup %s to %s.old" #~ msgstr "انسخ %s احتياطياً الى %s.old" #~ msgid "ttf fonts conversion" #~ msgstr "تحويل خطوط ttf" #~ msgid "Fonts conversion" #~ msgstr "تحويل الخطوط" #~ msgid "" #~ "Choose the hard drive you want to erase in order to install your new\n" #~ "Mandrake Linux partition. Be careful, all data present on it will be " #~ "lost\n" #~ "and will not be recoverable!" #~ msgstr "" #~ "اختر القرص الصلب الذي تريد محوه لتثبيت تجزئة\n" #~ "Mandrake Linux الجديدة. خذ حذرك, كل البيانات الموجود عليه ستضيع\n" #~ "و لن يمكن استعادتها!" #~ msgid "" #~ "\"Sound card\": if a sound card is detected on your system, it is " #~ "displayed\n" #~ "here. If you notice the sound card displayed is not the one that is\n" #~ "actually present on your system, you can click on the button and choose\n" #~ "another driver." #~ msgstr "" #~ "\"بطاقة الصوت\": اذا تم اكتشاف بطاقة صوت على نظامك, سيتم عرضها\n" #~ "هنا. اذا لاحظت أن بطاقة الصوت المعروضة هنا ليست تلك الموجودة\n" #~ "فعلاً على نظامك, يمكنك النقر على الزر و اختيار مشغل\n" #~ "آخر." #~ msgid "" #~ "You can add additional entries in yaboot for other operating systems,\n" #~ "alternate kernels, or for an emergency boot image.\n" #~ "\n" #~ "For other OSs, the entry consists only of a label and the \"root\"\n" #~ "partition.\n" #~ "\n" #~ "For Linux, there are a few possible options:\n" #~ "\n" #~ " * Label: this is the name you will have to type at the yaboot prompt to\n" #~ "select this boot option.\n" #~ "\n" #~ " * Image: this would be the name of the kernel to boot. Typically, " #~ "vmlinux\n" #~ "or a variation of vmlinux with an extension.\n" #~ "\n" #~ " * Root: the \"root\" device or ``/'' for your Linux installation.\n" #~ "\n" #~ " * Append: on Apple hardware, the kernel append option is often used to\n" #~ "assist in initializing video hardware, or to enable keyboard mouse " #~ "button\n" #~ "emulation for the missing 2nd and 3rd mouse buttons on a stock Apple " #~ "mouse.\n" #~ "The following are some examples:\n" #~ "\n" #~ " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" #~ "hda=autotune\n" #~ "\n" #~ " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" #~ "\n" #~ " * Initrd: this option can be used either to load initial modules before\n" #~ "the boot device is available, or to load a ramdisk image for an " #~ "emergency\n" #~ "boot situation.\n" #~ "\n" #~ " * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If " #~ "you\n" #~ "need to allocate a large ramdisk, this option can be used to specify a\n" #~ "ramdisk larger than the default.\n" #~ "\n" #~ " * Read-write: normally the \"root\" partition is initially mounted as\n" #~ "read-only, to allow a file system check before the system becomes " #~ "``live''.\n" #~ "You can override the default with this option.\n" #~ "\n" #~ " * NoVideo: should the Apple video hardware prove to be exceptionally\n" #~ "problematic, you can select this option to boot in ``novideo'' mode, " #~ "with\n" #~ "native frame buffer support.\n" #~ "\n" #~ " * Default: selects this entry as being the default Linux selection,\n" #~ "selectable by pressing ENTER at the yaboot prompt. This entry will also " #~ "be\n" #~ "highlighted with a ``*'' if you press [Tab] to see the boot selections." #~ msgstr "" #~ "You can add additional entries in yaboot for other operating systems,\n" #~ "alternate kernels, or for an emergency boot image.\n" #~ "\n" #~ "For other OSs, the entry consists only of a label and the \"root\"\n" #~ "partition.\n" #~ "\n" #~ "For Linux, there are a few possible options:\n" #~ "\n" #~ " * Label: this is the name you will have to type at the yaboot prompt to\n" #~ "select this boot option.\n" #~ "\n" #~ " * Image: this would be the name of the kernel to boot. Typically, " #~ "vmlinux\n" #~ "or a variation of vmlinux with an extension.\n" #~ "\n" #~ " * Root: the \"root\" device or ``/'' for your Linux installation.\n" #~ "\n" #~ " * Append: on Apple hardware, the kernel append option is often used to\n" #~ "assist in initializing video hardware, or to enable keyboard mouse " #~ "button\n" #~ "emulation for the missing 2nd and 3rd mouse buttons on a stock Apple " #~ "mouse.\n" #~ "The following are some examples:\n" #~ "\n" #~ " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" #~ "hda=autotune\n" #~ "\n" #~ " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" #~ "\n" #~ " * Initrd: this option can be used either to load initial modules before\n" #~ "the boot device is available, or to load a ramdisk image for an " #~ "emergency\n" #~ "boot situation.\n" #~ "\n" #~ " * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If " #~ "you\n" #~ "need to allocate a large ramdisk, this option can be used to specify a\n" #~ "ramdisk larger than the default.\n" #~ "\n" #~ " * Read-write: normally the \"root\" partition is initially mounted as\n" #~ "read-only, to allow a file system check before the system becomes " #~ "``live''.\n" #~ "You can override the default with this option.\n" #~ "\n" #~ " * NoVideo: should the Apple video hardware prove to be exceptionally\n" #~ "problematic, you can select this option to boot in ``novideo'' mode, " #~ "with\n" #~ "native frame buffer support.\n" #~ "\n" #~ " * Default: selects this entry as being the default Linux selection,\n" #~ "selectable by pressing ENTER at the yaboot prompt. This entry will also " #~ "be\n" #~ "highlighted with a ``*'' if you press [Tab] to see the boot selections." #~ msgid "" #~ "DrakX will first detect any IDE devices present in your computer. It " #~ "will\n" #~ "also scan for one or more PCI SCSI cards on your system. If a SCSI card " #~ "is\n" #~ "found, DrakX will automatically install the appropriate driver.\n" #~ "\n" #~ "Because hardware detection is not foolproof, DrakX may fail in detecting\n" #~ "your hard drives. If so, You'll have to specify your hardware by hand.\n" #~ "\n" #~ "If you had to manually specify your PCI SCSI adapter, DrakX will ask if " #~ "you\n" #~ "want to configure options for it. You should allow DrakX to probe the\n" #~ "hardware for the card-specific options which are needed to initialize " #~ "the\n" #~ "adapter. Most of the time, DrakX will get through this step without any\n" #~ "issues.\n" #~ "\n" #~ "If DrakX is not able to probe for the options to automatically determine\n" #~ "which parameters need to be passed to the hardware, you'll need to " #~ "manually\n" #~ "configure the driver." #~ msgstr "" #~ "سيقوم DrakX أو?ً بالتحقق من وجود أجهزة IDE على هذا الكمبيوتر. سيقوم\n" #~ "أيضاً بالبحث عن بطاقات PCI SCSI على نظامك. اذا تم ايجاد بطاقة\n" #~ "SCSI,سيقوم DrakX بتثبيت المشغل المناسب أوتوماتيكياً.\n" #~ "\n" #~ "و ?ن عملية التحقق من العتاد ليست خالية من ا?خطاء, سيقوم DrakX بسؤالك عمّا " #~ "اذا\n" #~ "كانت لديك بطاقة PCI SCSI. النقر على \"نعم\" سيعرض قائمة ببطاقات SCSI\n" #~ "لتختار منها. انقر \"?\" اذا كنت تعلم أنه ? توجد بطاقات SCSI على\n" #~ "ماكينتك. اذا لم تكن متأكداً, يمكنك التأكد من قائمة العتاد التي تم ايجادها\n" #~ "على ماكينتك عن طريق اختيار \"عرض معلومات العتاد\" و نقر\n" #~ "\"التالي->\". تأكد من قائمة العتاد ثم اضغط على زر \"التالي\n" #~ "->\" للعودة الى شؤال واجهة SCSI.\n" #~ "\n" #~ "اذا اضطررت الى تحديد موائم PCI SCSI يدوياً, فسيسألك DrakX عمّا اذا كنت\n" #~ "تريد تهيئة الخيارات الخاصة بها. يجب أن تسمح لـ DrakX بأن يتحقق من\n" #~ "العتاد للخيارات الخاصة بالبطاقة و التي يٌُحتاج اليها ليتم بدء\n" #~ "عمل البطاقة. في أغلب ا?وقات, سيقوم DrakX بالخطوة دون أي\n" #~ "مشاكل.\n" #~ "\n" #~ "اذا لم يتمكن DrakX من التعرف على الخيارات الضروريةلتمريرها\n" #~ "الى العتاد, ففي هذه الحال ستحتاج الى تهيئة\n" #~ "المشغّل يدوياً." #~ msgid "" #~ "After you have configured the general bootloader parameters, the list of\n" #~ "boot options that will be available at boot time will be displayed.\n" #~ "\n" #~ "If there are other operating systems installed on your machine they will\n" #~ "automatically be added to the boot menu. You can fine-tune the existing\n" #~ "options by clicking \"Add\" to create a new entry; selecting an entry " #~ "and\n" #~ "clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" " #~ "validates\n" #~ "your changes.\n" #~ "\n" #~ "You may also not want to give access to these other operating systems to\n" #~ "anyone who goes to the console and reboots the machine. You can delete " #~ "the\n" #~ "corresponding entries for the operating systems to remove them from the\n" #~ "bootloader menu, but you will need a boot disk in order to boot those " #~ "other\n" #~ "operating systems!" #~ msgstr "" #~ "بعدما قمت بتهيئة المعام?ت العامة لمحمّل ا?قلاع, فسيتم\n" #~ "عرض قائمة خيارات ا?قلاع المتوفرة عند بدء التشغيل.\n" #~ "\n" #~ "اذا كانت هناك أنظمة تشغيل أخرى مثبتة على ماكينتك فسيتم اضافتها\n" #~ "آلياً الى قائمة ا?قلاع. يمكنك التحكم بالخيارات\n" #~ "الموجودة بنقر \"اضف\" ?نشاء مدخل جديد, و اختيار مدخل و\n" #~ "نقر \"تعديل\" أو \"حذف\" لتعديل أو حذف المدخل. \"موافق\" يتأكد\n" #~ "من تغييراتك.\n" #~ "\n" #~ "ربما ? تريد ?ي شخص يتمكن من اعادة تشغيل الماكينة أن يستطيع\n" #~ "الوصل الى أنظمة التشغيل ا?خرى. يمكنك حذف المداخل المقابلة\n" #~ "?نظمة التشغيل لحذفها من قائمة محمّل ا?قلاع, لكن في هذه الحالة ستحتاج الى " #~ "قرص\n" #~ "مرن للإق?ع كي تتمكن من الوصول الى أنظمة\n" #~ "التشغيل ا?خرى!" #~ msgid "" #~ "Depending on the default language you chose in Section , DrakX will\n" #~ "automatically select a particular type of keyboard configuration. " #~ "However,\n" #~ "you might not have a keyboard that corresponds exactly to your language:\n" #~ "for example, if you are an English speaking Swiss person, you may have a\n" #~ "Swiss keyboard. Or if you speak English but are located in Quebec, you " #~ "may\n" #~ "find yourself in the same situation where your native language and " #~ "keyboard\n" #~ "do not match. In either case, this installation step will allow you to\n" #~ "select an appropriate keyboard from a list.\n" #~ "\n" #~ "Click on the \"More \" button to be presented with the complete list of\n" #~ "supported keyboards.\n" #~ "\n" #~ "If you choose a keyboard layout based on a non-Latin alphabet, the next\n" #~ "dialog will allow you to choose the key binding that will switch the\n" #~ "keyboard between the Latin and non-Latin layouts." #~ msgstr "" #~ "اعتماداً على اللغة ا?فتراضية التي اخترتها في هذا القسم, سيقوم DrakX\n" #~ "باختيار تهيئة لوحة المفاتيح آلياً. عموماً,\n" #~ "ربما ليست لديك لوحة مفاتيح مقابلة بشكل مباشر للغتك:\n" #~ "مثلاً ربما تكون عربياً متكلماً باللغة ا?نجليزية, ربما تكون لديك\n" #~ "لوحة مفاتيح سويسرية. اذا كنت تتكلم ا?نجليزية لكن موجود في كيبك, ربما\n" #~ "تجد نفسك في نفس الموقف حيث ? تتطابق لغتك مع لوحة المفاتيح.\n" #~ "في الحالتين, ستسمح لك خطوة التثبيت ستسمح لك باختيار\n" #~ "لوحة مفاتيح مناسبة من القائمة.\n" #~ "\n" #~ "انقر زر \"المزيد\" لعرض قائمة بكل لوحات المفاتيح\n" #~ "المدعومة.\n" #~ "\n" #~ "اذا اخترت لوحة مفاتيح لحروف غير ?تينية, فسيسمح لك\n" #~ "مربع الحوار التالي باختيار اختصارات لوحة المفاتيح التي\n" #~ "ستغير وضع لوحة المفاتيح بين الحروف اللاتينية و الغير ?تينية." #~ msgid "" #~ "This step is activated only if an old GNU/Linux partition has been found " #~ "on\n" #~ "your machine.\n" #~ "\n" #~ "DrakX now needs to know if you want to perform a new install or an " #~ "upgrade\n" #~ "of an existing Mandrake Linux system:\n" #~ "\n" #~ " * \"Install\": For the most part, this completely wipes out the old\n" #~ "system. If you wish to change how your hard drives are partitioned, or\n" #~ "change the file system, you should use this option. However, depending " #~ "on\n" #~ "your partitioning scheme, you can prevent some of your existing data " #~ "from\n" #~ "being over- written.\n" #~ "\n" #~ " * \"Upgrade\": this installation class allows you to update the " #~ "packages\n" #~ "currently installed on your Mandrake Linux system. Your current\n" #~ "partitioning scheme and user data is not altered. Most of other\n" #~ "configuration steps remain available, similar to a standard " #~ "installation.\n" #~ "\n" #~ "Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n" #~ "running version \"8.1\" or later. Performing an Upgrade on versions " #~ "prior\n" #~ "to Mandrake Linux version \"8.1\" is not recommended." #~ msgstr "" #~ "يتم تنشيط هذه الخطوة فقط اذا تم ايجاد تجزئة لينكس قديمة\n" #~ "على جهازك.\n" #~ "\n" #~ "يحتاج DrakX ا?ن الى أن يعلم اذا كنت تريد التثبيت من الصفر أو\n" #~ "تريد ترقية نظام Mandrake Linux الموجود لديك مسبقاً:\n" #~ "\n" #~ " * \"تثبيت\": في ا?غلب تقوم بازالة النظام القديم\n" #~ "كلياً. اذا كنت تريد تغيير تجزئات القرص الصلب, أو تريد\n" #~ "تغيير نظام الملفات, عليك اختيار هذا الخيار. عموماً اعتمادا\n" #~ "على كيفية تجزئة القرص الصلب لديك. يمكنك منع ازالة بعض\n" #~ "بياناتك الموجودة مسبقاً.\n" #~ " * \"ترقية\": فئة التثبيت هذه تسمح لك بتحديث الحزم\n" #~ "على نظام Mandrake Linux الخاص بك. لن يتم تغيير\n" #~ "بياناتك أو تقسيمات القرص الصلب. أغلب خطوات التهيئة ا?خرى\n" #~ "لا تزال موجودة, مثل التثبيت الاعتيادي.\n" #~ "\n" #~ "استخدام خيار ``الترقية'' يجب أن يعمل بشكل جيد على\n" #~ "اصدارات Mandrake Linux \"8.1\" أو ما فوق. ? ينصح بالترقية\n" #~ "من اصادرات Mandrake Linux قبل \"8.1\"." #~ msgid "" #~ "At this point, DrakX will allow you to choose the security level desired\n" #~ "for the machine. As a rule of thumb, the security level should be set\n" #~ "higher if the machine will contain crucial data, or if it will be a " #~ "machine\n" #~ "directly exposed to the Internet. The trade-off of a higher security " #~ "level\n" #~ "is generally obtained at the expense of ease of use.\n" #~ "\n" #~ "If you do not know what to choose, keep the default option." #~ msgstr "" #~ "عند هذه النقطة, سيسمح لك DrakX باختيار المستوى الأمني الذي ترغب به\n" #~ "لهذه الماكينة. بديهياً, يجب تعيين مستوى أمني\n" #~ "عالٍ اذا كانت الماكينة تحتوي على معلومات هامة, أو اذا كانت الماكينة\n" #~ "ستُستخدم للإتصال بالإنترنت. ان استخدام مستوى أمني عالٍ يأتي\n" #~ "عادة على حساب سهولة الإستخدام.\n" #~ "\n" #~ "اذا لم تكن تريد الإختيار, احفظ الاختيار الإفتراضي." #~ msgid "" #~ "Monitor\n" #~ "\n" #~ " The installer can normally automatically detect and configure the\n" #~ "monitor connected to your machine. If it is not the case, you can choose " #~ "in\n" #~ "this list the monitor you actually own." #~ msgstr "" #~ "الشاشة\n" #~ "\n" #~ " يمكن لبرنامج التثبيت اكتشاف و تهيئة الشاشة المتصلة بماكينتك\n" #~ "آلياً. ان لم يصل ذلك, يمكنك اختيار الشاشة التي لديك\n" #~ "من القائمة." #~ msgid "" #~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n" #~ "local time according to the time zone you selected. If the clock on your\n" #~ "motherboard is set to local time, you may deactivate this by unselecting\n" #~ "\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n" #~ "system clock and the hardware clock are in the same timezone. This is\n" #~ "useful when the machine also hosts another operating system like " #~ "Windows.\n" #~ "\n" #~ "The \"Automatic time synchronization \" option will automatically " #~ "regulate\n" #~ "the clock by connecting to a remote time server on the Internet. For " #~ "this\n" #~ "feature to work, you must have a working Internet connection. It is best " #~ "to\n" #~ "choose a time server located near you. This option actually installs a " #~ "time\n" #~ "server that can used by other machines on your local network." #~ msgstr "" #~ "يقوم لينكس بإدارة الوقت حسب توقيت غرينتش ثم يترجمه الى\n" #~ "التوقيت المحلي حسب المنطقة الزمنية التي اخترتها. اذا كانت الساعة\n" #~ "التي في اللوحة الرئيسية مضبوطة على التوقيت المحلي, يمكنك ازالة تنشيط ذلك\n" #~ "عن طريق ازالة التأشير من \"ساعة الجهاز مضبوظة على توقيت غرينتش\" و التي " #~ "ستجعل\n" #~ "لينكس يعلم أن ساعة النظام و ساعة الجهاز على نفس التوقيت. هذا\n" #~ "مفيد عندما تستضيف الماكينة نظام تشغيل آخر مثل Windows.\n" #~ "\n" #~ "خيار \"تزامن آلي للوقت\" سيقوم آلياً بضبط الساعة عن طريق\n" #~ "ا?تصال بخادم وقت بعيد على ا?نترنت. كي تعمل هذه الميزة,\n" #~ "يجب أن تكون لديك وصلة انترنت عاملة. من ا?فضل اختيار خادم\n" #~ "الوقت ا?قرب اليك. هذا الخيار يثبت خادم وقت\n" #~ "يمكن استخدامه عن طريق الماكينات ا?خرى على الشبكة المحلية." #~ msgid "" #~ "You will now set up your Internet/network connection. If you wish to\n" #~ "connect your computer to the Internet or to a local network, click " #~ "\"Next\n" #~ "->\". Mandrake Linux will attempt to autodetect network devices and " #~ "modems.\n" #~ "If this detection fails, uncheck the \"Use auto detection\" box. You may\n" #~ "also choose not to configure the network, or to do it later, in which " #~ "case\n" #~ "clicking the \"Cancel\" button will take you to the next step.\n" #~ "\n" #~ "When configuring your network, the available connections options are:\n" #~ "traditional modem, ISDN modem, ADSL connection, cable modem, and finally " #~ "a\n" #~ "simple LAN connection (Ethernet).\n" #~ "\n" #~ "We will not detail each configuration option - just make sure that you " #~ "have\n" #~ "all the parameters, such as IP address, default gateway, DNS servers, " #~ "etc.\n" #~ "from your Internet Service Provider or system administrator.\n" #~ "\n" #~ "You can consult the ``Starter Guide'' chapter about Internet connections\n" #~ "for details about the configuration, or simply wait until your system is\n" #~ "installed and use the program described there to configure your " #~ "connection." #~ msgstr "" #~ "ستقوم ا?ن بإعداد وصلة ا?نترنت/الشبكة الخاصة بك. اذا كنت تريد\n" #~ "توصيل جهازك با?نترنت أو للشبكة المحلية, انقر \"التالي ->\"\n" #~ "سيحاول Mandrake Linux أن يتحقق آلياً من وجود ا?جهزة و المودمات.\n" #~ "اذا فشل التحقق, أزل التأشبر من \"استخدم التحقق ا?لي\". ربما تختار\n" #~ "عدم تهيئة الشبكة, أو تريد أن تفعل ذلك, في هذه الحال\n" #~ "فإن ضغط زر \"الغاء\" سيأخذك الى الخطوة التالية.\n" #~ "\n" #~ "أثناء تهيئة الشبكة, فإن خيارات التوصيل المتوفرة هي:\n" #~ "مودم تقليدي, مودم ISDN, وصلة ADSL, مودم كيبل, و أخيراً\n" #~ "وصلة LAN بسيطة (ايثرنت).\n" #~ "\n" #~ "لن نذكر كل خيارات التهيئة بالتفصيل - فقط تأكد أنه لديك\n" #~ "كل المعاملات, مثل عنوان IP, البوابة ا?فتراضية, خادمات DNS, الخ.\n" #~ "من موفر خدمة ا?نترنت أو مدير النظام.\n" #~ "\n" #~ "يمكنك الرجوع الى الفصل الخاص بإعداد وصلة ا?نترنت في\n" #~ "``دليل المبتدئ'' للتفاصيل حول التهيئة, أو ببساطة انتظر حتى يتم\n" #~ "تثبيت النظام و استخدم البرنامج المذكور هناك ?عداد الوصلة." #~ msgid "Harddrake2 version " #~ msgstr "Harddrake2 الإصدار " #~ msgid "Author:" #~ msgstr "المؤلف:" #~ msgid "" #~ "This is HardDrake, a Mandrake hardware configuration tool.\n" #~ "Version:" #~ msgstr "" #~ "هذا هو HardDrake, أداة Mandrake لتهيئة العتاد.\n" #~ "الإصدار:" #~ msgid "Printer sharing" #~ msgstr "مشاركة الطابعات" #~ msgid "" #~ "Your printer belongs to the group of GDI laser printers (winprinters) " #~ "sold by different manufacturers which uses the Zenographics ZJ-stream " #~ "raster format for the data sent to the printer. The driver for these " #~ "printers is still in a very early development stage and so it will " #~ "perhaps not always work properly. Especially it is possible that the " #~ "printer only works when you choose the A4 paper size.\n" #~ "\n" #~ "Some of these printers, as the HP LaserJet 1000, for which this driver " #~ "was originally created, need their firmware to be uploaded to them after " #~ "they are turned on. In the case of the HP LaserJet 1000 you have to " #~ "search the printer's Windows driver CD or your Windows partition for the " #~ "file \"sihp1000.img\" and upload the file to the printer with one of the " #~ "following commands:\n" #~ "\n" #~ " lpr -o raw sihp1000.img\n" #~ " cat sihp1000.img > /dev/usb/lp0\n" #~ "\n" #~ "The first command can be given by any normal user, the second must be " #~ "given as root. After having done so you can print normally.\n" #~ msgstr "" #~ "Your printer belongs to the group of GDI laser printers (winprinters) " #~ "sold by different manufacturers which uses the Zenographics ZJ-stream " #~ "raster format for the data sent to the printer. The driver for these " #~ "printers is still in a very early development stage and so it will " #~ "perhaps not always work properly. Especially it is possible that the " #~ "printer only works when you choose the A4 paper size.\n" #~ "\n" #~ "Some of these printers, as the HP LaserJet 1000, for which this driver " #~ "was originally created, need their firmware to be uploaded to them after " #~ "they are turned on. In the case of the HP LaserJet 1000 you have to " #~ "search the printer's Windows driver CD or your Windows partition for the " #~ "file \"sihp1000.img\" and upload the file to the printer with one of the " #~ "following commands:\n" #~ "\n" #~ " lpr -o raw sihp1000.img\n" #~ " cat sihp1000.img > /dev/usb/lp0\n" #~ "\n" #~ "The first command can be given by any normal user, the second must be " #~ "given as root. After having done so you can print normally.\n" #~ msgid "GDI Laser Printer using the Zenographics ZJ-Stream Format" #~ msgstr "GDI Laser Printer using the Zenographics ZJ-Stream Format" #~ msgid "Office" #~ msgstr "أدوات المكتب" #~ msgid "Set of tools for mail, news, web, file transfer, and chat" #~ msgstr "" #~ "مجموعة من الأدوات للبريد , الأخبار, الإنترنت, نقل الملفات, و المحادثة" #~ msgid "Games" #~ msgstr "الالعاب" #~ msgid "Multimedia - Graphics" #~ msgstr "وسائط متعددة - رسوميات" #~ msgid "Multimedia - Sound" #~ msgstr "وسائط متعددة - صوت" #~ msgid "Audio-related tools: mp3 or midi players, mixers, etc" #~ msgstr "أدوات صوتية: مشغلات mp3 أو midi, مازجات صوت, الخ" #~ msgid "Multimedia - Video" #~ msgstr "وسائط متعدددة - فيديو" #~ msgid "Video players and editors" #~ msgstr "برامج تشغيل و تحرير الفيديو" #~ msgid "Multimedia - CD Burning" #~ msgstr "وسائط متعددة - نسخ أقراص" #~ msgid "Tools to create and burn CD's" #~ msgstr "أدوات لعمل و نسخ الأقراص" #~ msgid "More Graphical Desktops (Gnome, IceWM)" #~ msgstr "أسطح مكتب رسومية أكثر (Gnome, IceWM)" #~ msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc" #~ msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, الخ" #~ msgid "Personal Information Management" #~ msgstr "ادارة المعلومات الشخصية" #~ msgid "Tools for your Palm Pilot or your Visor" #~ msgstr "أدوات لجهاز بالم بايلوت أو فايزور ألخاص بك" #~ msgid "Personal Finance" #~ msgstr "الميزانية الشخصية" #~ msgid "Programs to manage your finances, such as gnucash" #~ msgstr "برامج لإدارة ميزانيتك مثل gnucash" #~ msgid "no network card found" #~ msgstr "لا بطاقة شبكة وجدت " #~ msgid "" #~ "Mandrake Linux 9.2 has selected the best software for you. Surf the Web " #~ "and view animations with Mozilla and Konqueror, or read your mail and " #~ "handle your personal information with Evolution and Kmail" #~ msgstr "" #~ "اختار Mandrake Linux 9.2 أفضل البرامج لك. تصفح الإنترنت و استعرض الصر " #~ "المتحركة باستخدام موزيللا و كونكيورر, أو اقرأ بريدك الألكتروني و تعامل مع " #~ "معلوماتك الشخصية باستخدام KMail و Evolution" #~ msgid "Get the most from the Internet" #~ msgstr "احصل على ما تريد من الإنترنت" #~ msgid "Push multimedia to its limits!" #~ msgstr "استمتع بالوسائط المتعددة الى أقصى حد!" #~ msgid "Discover the most up-to-date graphical and multimedia tools!" #~ msgstr "اكتشف أحدث أدوات الوسائط المتعددة و برامج الرسم!" #~ msgid "" #~ "Mandrake Linux 9.2 provides the best Open Source games - arcade, action, " #~ "strategy, ..." #~ msgstr "" #~ "Mandrake Linux 9.2 يوفر أفضل الألعاب مفتوحة المصدر - أركيد, حركة, " #~ "استراتيجية, ..." #~ msgid "" #~ "Mandrake Linux 9.2 provides a powerful tool to fully customize and " #~ "configure your machine" #~ msgstr "يوفر Mandrake Linux 9.2 أداة قوية لتخصيص و تهيئة جهازك" #~ msgid "User interfaces" #~ msgstr "واجهات الإستخدام" #~ msgid "" #~ "Use the full power of the GNU gcc 3 compiler as well as the best Open " #~ "Source development environments" #~ msgstr "" #~ "استفيد من كل قوة المترجم GNU gcc 3 بالإضافة الى أفضل بيئات التطوير مفتوحة " #~ "المصادر" #~ msgid "Development simplified" #~ msgstr "البرمجة ولا أسهل" #~ msgid "" #~ "This firewall product includes network features that allow you to fulfill " #~ "all your security needs" #~ msgstr "" #~ "منتج الجدار الناري هذا يحتوي على مزايا للشبكة توفر كل احتياجاتك الأمنية" #~ msgid "" #~ "The MandrakeSecurity range includes the Multi Network Firewall product (M." #~ "N.F.)" #~ msgstr "منتجات MandrakeSecurity تتضمن Multi Network Firewall (M.N.F.)" #~ msgid "Strategic partners" #~ msgstr "شركاؤنا الاستراتيجيون" #~ msgid "" #~ "Whether you choose to teach yourself online or via our network of " #~ "training partners, the Linux-Campus catalogue prepares you for the " #~ "acknowledged LPI certification program (worldwide professional technical " #~ "certification)" #~ msgstr "" #~ "سواء اخترت أن تعلم نفسك بنفسك عبر الإنترنت أو عبر شبكتنا من شركاءنا في " #~ "مجال التبريد, يحضرك دليل Linux-Campus لبرنامج شهادة LPI المعترف يها في " #~ "جميع أنحاء العالم." #~ msgid "Certify yourself on Linux" #~ msgstr "احصل على شهادة معتمدة في لينكس" #~ msgid "" #~ "The training program has been created to respond to the needs of both end " #~ "users and experts (Network and System administrators)" #~ msgstr "" #~ "تم عمل برنامج التدريب كي يستجيب الى احتياجات كلٍ من المستخدمين و الخبراء " #~ "(مدراء الشبكة و الأنظمة)" #~ msgid "Discover MandrakeSoft's training catalogue Linux-Campus" #~ msgstr "اكتشف دليل تدريب MandrakeSoft Linux-Campus" #~ msgid "" #~ "MandrakeClub and Mandrake Corporate Club were created for business and " #~ "private users of Mandrake Linux who would like to directly support their " #~ "favorite Linux distribution while also receiving special privileges. If " #~ "you enjoy our products, if your company benefits from our products to " #~ "gain a competititve edge, if you want to support Mandrake Linux " #~ "development, join MandrakeClub!" #~ msgstr "" #~ "تم انشاء MandrakeClub و Mandrake Corporate Club للشركات و المستخدمين " #~ "الأفراد الذين يريدون دعم توزيعة لينكس المفضلة لديهم بشكل مباشر مع تمتعهم " #~ "بمزايا خاصة. اذا كانت منتجاتنا قد حازت على اعجابك, اذا كانت شركتك تستفيد " #~ "من منتجاتنا و تساعدها على زيادة قدرتها التنافسية, اذا كنت تريد دعم تطوير " #~ "Mandrake Linux, التحق بنادي MandrakeClub!" #~ msgid "Discover MandrakeClub and Mandrake Corporate Club" #~ msgstr "اكتشف MandrakeClub للأفراد و Mandrake Corporate Club للشركات" #~ msgid "" #~ "As a review, DrakX will present a summary of various information it has\n" #~ "about your system. Depending on your installed hardware, you may have " #~ "some\n" #~ "or all of the following entries:\n" #~ "\n" #~ " * \"Mouse\": check the current mouse configuration and click on the " #~ "button\n" #~ "to change it if necessary.\n" #~ "\n" #~ " * \"%s\": check the current keyboard map configuration and click on\n" #~ "the button to change that if necessary.\n" #~ "\n" #~ " * \"%s\": check the current country selection. If you are not in this\n" #~ "country, click on the button and choose another one.\n" #~ "\n" #~ " * \"Timezone\": By default, DrakX deduces your time zone based on the\n" #~ "primary language you have chosen. But here, just as in your choice of a\n" #~ "keyboard, you may not be in a country to which the chosen language\n" #~ "corresponds. You may need to click on the \"Timezone\" button to\n" #~ "configure the clock for the correct timezone.\n" #~ "\n" #~ " * \"Printer\": clicking on the \"No Printer\" button will open the " #~ "printer\n" #~ "configuration wizard. Consult the corresponding chapter of the ``Starter\n" #~ "Guide'' for more information on how to setup a new printer. The " #~ "interface\n" #~ "presented there is similar to the one used during installation.\n" #~ "\n" #~ " * \"Bootloader\": if you wish to change your bootloader configuration,\n" #~ "click that button. This should be reserved to advanced users.\n" #~ "\n" #~ " * \"Graphical Interface\": by default, DrakX configures your graphical\n" #~ "interface in \"800x600\" resolution. If that does not suits you, click " #~ "on\n" #~ "the button to reconfigure your graphical interface.\n" #~ "\n" #~ " * \"Network\": If you want to configure your Internet or local network\n" #~ "access now, you can by clicking on this button.\n" #~ "\n" #~ " * \"Sound card\": if a sound card is detected on your system, it is\n" #~ "displayed here. If you notice the sound card displayed is not the one " #~ "that\n" #~ "is actually present on your system, you can click on the button and " #~ "choose\n" #~ "another driver.\n" #~ "\n" #~ " * \"TV card\": if a TV card is detected on your system, it is displayed\n" #~ "here. If you have a TV card and it is not detected, click on the button " #~ "to\n" #~ "try to configure it manually.\n" #~ "\n" #~ " * \"ISDN card\": if an ISDN card is detected on your system, it will be\n" #~ "displayed here. You can click on the button to change the parameters\n" #~ "associated with the card." #~ msgstr "" #~ "للمراجعة, سيقوم DrakX بعرض ملخص للمعلومات التي لديه\n" #~ "عن نظامك. اعتماداً على العتاد الموجود لديك, قد تكون لديك بعض\n" #~ "أو كل المدخلات التالية:\n" #~ " * \"الفأرة\": تأكد من اعدادات الفأرة الحالية و انقر الزر عند الحاجة الى\n" #~ "تغيير ا?عدادات.\n" #~ "\n" #~ " * \"لوحة المفاتيح\": تأكد من اعدادات خريطة لوحة المفاتيح و انقر\n" #~ "الزر عند الحاجة الى تغيير ا?عدادات.\n" #~ "\n" #~ " * \"البلد\":تأكد من صحة اختيار البلد. ان لم تكن في البلد\n" #~ "المذكورة, انقر الزر و اختر بلداً آخر.\n" #~ "\n" #~ " * \"المنطقة الزمنية\":يقوم DrakX باستنتاج منطقتك الزمنية بناء على\n" #~ "اللغة التي اخترتها. لكن هنا, تماماً مثل اختيارك للوحة المفاتيح,\n" #~ "قد ? تكون في البلد التي تختص بها اللغة المختارة.\n" #~ "ربما تحتاج الى النقر على زر \"المنطقة الزمنية\"لتهيئة\n" #~ "الساعة للمنطقة الزمنية الصحيحة.\n" #~ "\n" #~ " * \"الطابعة\": الضغط على زر \"? طابعةسيفتح معالج\n" #~ "تهيئة الطابعات. الق نظرة على الفضل المخصص للطابعات من ``دليل\n" #~ "المبتدئ'' لمزيد من المعلومات حول كيفية تهيئة طابعة جديدة. الواجهة\n" #~ "المقدمة هنا مماثلة لتلك المستخدمة أثناء التثبيت.\n" #~ "\n" #~ " * \"محمّل ا?قلاع\": اذا كنت تود تغيير اعدادات محمّل ا?قلاع,\n" #~ "انقر هذا الزر. يجب عمل هذا فقط عن طريق المستخدمين المتقدمين.\n" #~ "\n" #~ " * \"الواجهة الرسومية\": يقوم DrakX افتراضياً بتعيين دقة عرض\n" #~ "\"800x600\". اذا لم يناسب هذا احتياجاتك, انقر \n" #~ "الزر ?عادة تهيئة الواجهة الرسومية.\n" #~ "\n" #~ " * \"الشبكة\": اذا كنت تريد تهيئة ا?تصال با?نترنت أو الشبكة المحلية\n" #~ "ا?ن, يمكنك فعل هذا عن طريق النقر على هذا الزر.\n" #~ "\n" #~ " * \"بطاقة الصوت\": اذا تم التحقق من وجود بطاقة صوت في نظامك, سيتم\n" #~ "عرضها هنا. اذا وجدت أن بطاقة الصوت المعروضة ليست هي التي توجد\n" #~ "فعلياً على نظامك, يمكنك نقر الزر و اختيار\n" #~ "مشغل آخر.\n" #~ " * \"بطاقة التلفاز\": اذا تم التحقق من وجود بطاقة تلفاز في نظامك, سيتم\n" #~ "عرضها هنا. اذا لم يتم اكتشاف بطاقة التلفاز الخاصة بك, انقر الزر\n" #~ "لتهيئتها يدوياً.\n" #~ "\n" #~ " * \"بطاقة ISDN\": اذا تم التحقق من وجود بطاقة ISDN على نظامك, سيتم\n" #~ "عرضها هنا. يمكنك النقر على الزر لتغيير المعاملات\n" #~ "المرتبطة بالبطاقة." #~ msgid "" #~ "DrakX will first detect any IDE devices present in your computer. It " #~ "will\n" #~ "also scan for one or more PCI SCSI cards on your system. If a SCSI card " #~ "is\n" #~ "found, DrakX will automatically install the appropriate driver.\n" #~ "\n" #~ "Because hardware detection is not foolproof, DrakX will ask you if you " #~ "have\n" #~ "a PCI SCSI installed. Clicking \" Yes\" will display a list of SCSI " #~ "cards\n" #~ "to choose from. Click \"No\" if you know that you have no SCSI hardware " #~ "in\n" #~ "your machine. If you're not sure, you can check the list of hardware\n" #~ "detected in your machine by selecting \"See hardware info \" and " #~ "clicking\n" #~ "the \"%s\". Examine the list of hardware and then click on the \"Next\n" #~ "->\" button to return to the SCSI interface question.\n" #~ "\n" #~ "If you had to manually specify your PCI SCSI adapter, DrakX will ask if " #~ "you\n" #~ "want to configure options for it. You should allow DrakX to probe the\n" #~ "hardware for the card-specific options which are needed to initialize " #~ "the\n" #~ "adapter. Most of the time, DrakX will get through this step without any\n" #~ "issues.\n" #~ "\n" #~ "If DrakX is not able to probe for the options to automatically determine\n" #~ "which parameters need to be passed to the hardware, you'll need to " #~ "manually\n" #~ "configure the driver." #~ msgstr "" #~ "سيقوم DrakX أو?ً بالتحقق من وجود أجهزة IDE على هذا الكمبيوتر. سيقوم\n" #~ "أيضاً بالبحث عن بطاقات PCI SCSI على نظامك. اذا تم ايجاد بطاقة\n" #~ "SCSI,سيقوم DrakX بتثبيت المشغل المناسب أوتوماتيكياً.\n" #~ "\n" #~ "و ?ن عملية التحقق من العتاد ليست خالية من ا?خطاء, سيقوم DrakX بسؤالك عمّا " #~ "اذا\n" #~ "كانت لديك بطاقة PCI SCSI. النقر على \"نعم\" سيعرض قائمة ببطاقات SCSI\n" #~ "لتختار منها. انقر \"?\" اذا كنت تعلم أنه ? توجد بطاقات SCSI على\n" #~ "ماكينتك. اذا لم تكن متأكداً, يمكنك التأكد من قائمة العتاد التي تم ايجادها\n" #~ "على ماكينتك عن طريق اختيار \"عرض معلومات العتاد\" و نقر\n" #~ "\"التالي->\". تأكد من قائمة العتاد ثم اضغط على زر \"التالي\n" #~ "->\" للعودة الى شؤال واجهة SCSI.\n" #~ "\n" #~ "اذا اضطررت الى تحديد موائم PCI SCSI يدوياً, فسيسألك DrakX عمّا اذا كنت\n" #~ "تريد تهيئة الخيارات الخاصة بها. يجب أن تسمح لـ DrakX بأن يتحقق من\n" #~ "العتاد للخيارات الخاصة بالبطاقة و التي يٌُحتاج اليها ليتم بدء\n" #~ "عمل البطاقة. في أغلب ا?وقات, سيقوم DrakX بالخطوة دون أي\n" #~ "مشاكل.\n" #~ "\n" #~ "اذا لم يتمكن DrakX من التعرف على الخيارات الضروريةلتمريرها\n" #~ "الى العتاد, ففي هذه الحال ستحتاج الى تهيئة\n" #~ "المشغّل يدوياً." #~ msgid "" #~ "Now, it's time to select a printing system for your computer. Other OSs " #~ "may\n" #~ "offer you one, but Mandrake Linux offers two. Each of the printing " #~ "systems\n" #~ "is best for a particular type of configuration.\n" #~ "\n" #~ " * \"pdq\" -- which is an acronym for ``print, don't queue'', is the " #~ "choice\n" #~ "if you have a direct connection to your printer, you want to be able to\n" #~ "panic out of printer jams, and you do not have networked printers. " #~ "(\"pdq\n" #~ "\" will handle only very simple network cases and is somewhat slow when\n" #~ "used with networks.) It's recommended that you use \"pdq \" if this is " #~ "your\n" #~ "first experience with GNU/Linux.\n" #~ "\n" #~ " * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n" #~ "printing to your local printer or to one halfway around the planet. It " #~ "is\n" #~ "simple to configure and can act as a server or a client for the ancient\n" #~ "\"lpd \" printing system, so it compatible with older operating systems\n" #~ "that may still need print services. While quite powerful, the basic " #~ "setup\n" #~ "is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, " #~ "make\n" #~ "sure to turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n" #~ "front-ends for printing or choosing printer options and for managing the\n" #~ "printer.\n" #~ "\n" #~ "If you make a choice now, and later find that you don't like your " #~ "printing\n" #~ "system you may change it by running PrinterDrake from the Mandrake " #~ "Control\n" #~ "Center and clicking the expert button." #~ msgstr "" #~ "ا?ن, حان وقت اختيار نظام الطباعة لنظامك. توفر أنظمة التشغيل ا?خرى\n" #~ "نظام طباعة واحد, لكن Mandrake Linux يوفر لك نظامين. كل نظام مناسب\n" #~ "لنوغ معين من التهيئة.\n" #~ "\n" #~ " * \"pdq\"--و هو اختصار لـ``print, don't queue'' أي ``اطبع و ? تصف'', هذا " #~ "هو الخيار ا?مثل\n" #~ "اذا كانت لديك وصلة مباشرة بالطابعة, و تريد تفادي أي ارتباك في الطابعة\n" #~ "و لديك طابعات على الشبكة.(يقوم \"pdq\" بالتعامل مع حا?ت الشبكة البسيطة\n" #~ "و يعيبه البطئ عند ا?ستخدام مع الشبكات). من ا?فضل أن تستخدم \"pdq\" اذا.\n" #~ "كانت هذه تجربتك ا?ولى مع نظام لينكس.\n" #~ "\n" #~ " * \"%s\" - ``Common UNIX Printing System'', هو الخيار ا?مثل\n" #~ "للطباعة على طابعتك المحلية أو حتى على طابعة في النصف ا?خر من الكوكب. انه\n" #~ "سهل ا?عداد و يمكن أن يتصرف كخادم أو كعميل ?نظمة طباعة \"lpd\"\n" #~ "القديمة, لذا فإنه متوافق مع أنظمة التشغيل القديمة\n" #~ "التي ? تزال تحتاج الى خدمات الطباعة.بينما التهيئة سهلة\n" #~ "و قوية مثل \"pdq\". اذا كنت تحتاج الى محاكاة خادم \"lpd\", تأكد\n" #~ "من تشغيل مراقب \"cups-lpd\". يحتوي CUPS على واجهات\n" #~ "رسومية للطباعة أو اختيار خيارات الطابعة و إدارة\n" #~ "الطابعة.\n" #~ "\n" #~ "اذا قمت يتقرير اختيارك ا?ن, ثم لم يعجبك نظام الطباعة\n" #~ "فيما بعد, يمكنك تغييره عن طريق تشغيل PrinterDrake من مركز تحكم Mandrake\n" #~ "و النقر على زر الخبير." #~ msgid "" #~ "Your choice of preferred language will affect the language of the\n" #~ "documentation, the installer and the system in general. Select first the\n" #~ "region you are located in, and then the language you speak.\n" #~ "\n" #~ "Clicking on the \"%s\" button will allow you to select other\n" #~ "languages to be installed on your workstation, thereby installing the\n" #~ "language-specific files for system documentation and applications. For\n" #~ "example, if you will host users from Spain on your machine, select " #~ "English\n" #~ "as the default language in the tree view and \"Espanol\" in the Advanced\n" #~ "section.\n" #~ "\n" #~ "Note that you're not limited to choosing a single additional language. " #~ "Once\n" #~ "you have selected additional locales, click the \"%s\" button to\n" #~ "continue.\n" #~ "\n" #~ "To switch between the various languages installed on the system, you can\n" #~ "launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n" #~ "language used by the entire system. Running the command as a regular " #~ "user\n" #~ "will only change the language settings for that particular user." #~ msgstr "" #~ "اختيارك للغة المفضلة سيؤثر على لغة وثائق المساعدة\n" #~ "و برنامج التثبيت و النظام بشكل عام. أو?ً اختر المنطقة التي\n" #~ "تتواجد فيها, ثم اللغة التي تتحدث بها.\n" #~ "\n" #~ "ضغط زر \"متقدم\" سيسمح لك باختيار لغات\n" #~ "أخرى ليتم تثبيتها على محطة العمل الخاصة بك,و من ثم\n" #~ "تثبيت الملفات الخاصة باللغات لوثائق المساعدة و التطبيقات, مثلاً\n" #~ "اذا كنت ستستضيف مستخدمين من أسبانيا على ماكينتك, اختر ا?نجليزية\n" #~ "كلغة افتراضية في النمط الشجري و \"ا?سبانية\" في القسم\n" #~ "المتقدم.\n" #~ "?حظ أنك لست مقيداً باختيار لغة واحدة اضافية. حال\n" #~ "اختيارك للإعدادات المحلية, اضغط زر \"التالي ->\"\n" #~ "للمتابعة.\n" #~ "\n" #~ "للتغيير بين اللغات المتعددة المثبتة على النظام, يمكنك\n" #~ "تشغيل ا?مر \"/usr/sbin/localedrake\"كمستخدم جذر لتغيير\n" #~ "اللغة المستخدمة عن طريق النظام ككل. تشغيل ا?مر كمستخدم عادي\n" #~ "سيغير فقط اعدادات اللغة لهذا المستخدم فقط." #~ msgid "" #~ "\"%s\": check the current country selection. If you are not in this\n" #~ "country, click on the button and choose another one." #~ msgstr "" #~ "\"البلد\": تأكد من اختيار البلد الحالي. اذا لم تكن في هذا\n" #~ "البلد, اضغط على الزر و اختر بلداً آخر." #~ msgid "" #~ "At this point, DrakX will allow you to choose the security level desired\n" #~ "for the machine. As a rule of thumb, the security level should be set\n" #~ "higher if the machine will contain crucial data, or if it will be a " #~ "machine\n" #~ "directly exposed to the Internet. The trade-off of a higher security " #~ "level\n" #~ "is generally obtained at the expense of ease of use. Refer to the \"msec" #~ "\"\n" #~ "chapter of the ``Command Line Manual'' to get more information about the\n" #~ "meaning of these levels.\n" #~ "\n" #~ "If you do not know what to choose, keep the default option." #~ msgstr "" #~ "عند هذه النقطة, سيسمح لك DrakX باختيار المستوى الأمني الذي ترغب به\n" #~ "لهذه الماكينة. بديهياً, يجب تعيين مستوى أمني\n" #~ "عالٍ اذا كانت الماكينة تحتوي على معلومات هامة, أو اذا كانت الماكينة\n" #~ "ستُستخدم للإتصال بالإنترنت. ان استخدام مستوى أمني عالٍ يأتي\n" #~ "عادة على حساب سهولة الإستخدام. راجع فضل \"msec\"\n" #~ "في ``دليل سطر الأوامر'' للحصول على مزيد من المعلومات حول\n" #~ "معنى هذه المستويات.\n" #~ "\n" #~ "اذا لم تكن تريد الإختيار, احفظ الاختيار الإفتراضي." #~ msgid "" #~ "At the time you are installing Mandrake Linux, it is likely that some\n" #~ "packages have been updated since the initial release. Bugs may have been\n" #~ "fixed, security issues resolved. To allow you to benefit from these\n" #~ "updates, you are now able to download them from the Internet. Choose\n" #~ "\"Yes\" if you have a working Internet connection, or \"No\" if you " #~ "prefer\n" #~ "to install updated packages later.\n" #~ "\n" #~ "Choosing \"Yes\" displays a list of places from which updates can be\n" #~ "retrieved. Choose the one nearest you. A package-selection tree will\n" #~ "appear: review the selection, and press \"Install\" to retrieve and " #~ "install\n" #~ "the selected package( s), or \"Cancel\" to abort." #~ msgstr "" #~ "في الوقت الذي تقوم فيه بتثبيت Mandrake Linux, قد يكون تم تحديث\n" #~ "بعض الحزم منذ ا?صدار المبدئي, ربما يكون تم اصلاح بعض العيوب\n" #~ "أو تم حل المشاكل ا?منية. لكي تستفيد من هذه التحديثات,يمكنك\n" #~ "ا?ن تنزيل هذه التحديثات عبر ا?نترنت. اختر\n" #~ "\"نعم\" اذا كانت لديك وصلة انترنت عاملة, أو \"?\" اذا كنت تفضل\n" #~ "تثبيت هذه التحديثات ?حقاً.\n" #~ "\n" #~ "اختيار \"نعم\" يعرض قائمة با?ماكن التي يمكن منها الحصول\n" #~ "على التحديثات. اختر المكان الأقرب اليك. سيتم عرض قائمة بالحزم\n" #~ "راجع اختياراتك, ثم اضغط \"ثبّت\" لتنزيل و تثبيت\n" #~ "الحزم المختارة, أو \"الغاء\" ?حباط التحديث." #~ msgid "" #~ "At this point, you need to decide where you want to install the Mandrake\n" #~ "Linux operating system on your hard drive. If your hard drive is empty " #~ "or\n" #~ "if an existing operating system is using all the available space you " #~ "will\n" #~ "have to partition the drive. Basically, partitioning a hard drive " #~ "consists\n" #~ "of logically dividing it to create the space needed to install your new\n" #~ "Mandrake Linux system.\n" #~ "\n" #~ "Because the process of partitioning a hard drive is usually irreversible\n" #~ "and can lead to lost data if there is an existing operating system " #~ "already\n" #~ "installed on the drive, partitioning can be intimidating and stressful " #~ "if\n" #~ "you are an inexperienced user. Fortunately, DrakX includes a wizard " #~ "which\n" #~ "simplifies this process. Before continuing with this step, read through " #~ "the\n" #~ "rest of this section and above all, take your time.\n" #~ "\n" #~ "Depending on your hard drive configuration, several options are " #~ "available:\n" #~ "\n" #~ " * \"Use free space\": this option will perform an automatic " #~ "partitioning\n" #~ "of your blank drive(s). If you use this option there will be no further\n" #~ "prompts.\n" #~ "\n" #~ " * \"Use existing partition\": the wizard has detected one or more " #~ "existing\n" #~ "Linux partitions on your hard drive. If you want to use them, choose " #~ "this\n" #~ "option. You will then be asked to choose the mount points associated " #~ "with\n" #~ "each of the partitions. The legacy mount points are selected by default,\n" #~ "and for the most part it's a good idea to keep them.\n" #~ "\n" #~ " * \"Use the free space on the Windows partition\": if Microsoft Windows " #~ "is\n" #~ "installed on your hard drive and takes all the space available on it, " #~ "you\n" #~ "have to create free space for Linux data. To do so, you can delete your\n" #~ "Microsoft Windows partition and data (see `` Erase entire disk'' " #~ "solution)\n" #~ "or resize your Microsoft Windows FAT partition. Resizing can be " #~ "performed\n" #~ "without the loss of any data, provided you previously defragment the\n" #~ "Windows partition and that it uses the FAT format. Backing up your data " #~ "is\n" #~ "strongly recommended.. Using this option is recommended if you want to " #~ "use\n" #~ "both Mandrake Linux and Microsoft Windows on the same computer.\n" #~ "\n" #~ " Before choosing this option, please understand that after this\n" #~ "procedure, the size of your Microsoft Windows partition will be smaller\n" #~ "then when you started. You will have less free space under Microsoft\n" #~ "Windows to store your data or to install new software.\n" #~ "\n" #~ " * \"Erase entire disk\": if you want to delete all data and all " #~ "partitions\n" #~ "present on your hard drive and replace them with your new Mandrake Linux\n" #~ "system, choose this option. Be careful, because you will not be able to\n" #~ "undo your choice after you confirm.\n" #~ "\n" #~ " !! If you choose this option, all data on your disk will be " #~ "deleted. !!\n" #~ "\n" #~ " * \"Remove Windows\": this will simply erase everything on the drive " #~ "and\n" #~ "begin fresh, partitioning everything from scratch. All data on your disk\n" #~ "will be lost.\n" #~ "\n" #~ " !! If you choose this option, all data on your disk will be lost. !!\n" #~ "\n" #~ " * \"Custom disk partitionning\": choose this option if you want to\n" #~ "manually partition your hard drive. Be careful -- it is a powerful but\n" #~ "dangerous choice and you can very easily lose all your data. That's why\n" #~ "this option is really only recommended if you have done something like " #~ "this\n" #~ "before and have some experience. For more instructions on how to use the\n" #~ "DiskDrake utility, refer to the ``Managing Your Partitions '' section in\n" #~ "the ``Starter Guide''." #~ msgstr "" #~ "في هذه النقطة, عليك أن تقرر أين تريد تثبيت نظام\n" #~ "التشغيل Mandrake Linux على القرص الصلب الخاص بك. اذا كان القرص الصلب\n" #~ "قارغاً أو أن نظام تشغيل آخر يستخدم كل المساحة المتوفرة فسوف\n" #~ "تحتاج الى تجزئة القرص الصلب. بشكل عام,. فإن تجزئةالقرص الصلب\n" #~ "تعني تقسيم القرص الصلب منطقياً ?نشاء المساحة المطلوبة لتثبيت\n" #~ "نظام Mandrake Linux الجديد الخاص بك.\n" #~ "\n" #~ "?ن عملية تقسيم القرص الصلب غير قابلة للتراجع عادةًَ\n" #~ "كما أنها قد تتسبب في خسارة للبيانات اذا كان هناك نظام تشغيل\n" #~ "آخر مثبت على هذا القرص الصلب, تجزئة القرص قد يكون مزعجاً و مثيراً للضغط\n" #~ "اذا كنت مستخدماً محترقاً. من حسن الحظ, يوفر DrakX معالجاً يسهل العملية.\n" #~ "قبل متابعة هذه الخطوة, اقرأ بقية هذا القسم و قبل كل شئ, خذ وقتك.\n" #~ "\n" #~ "اعتماداً على اعدادات القرص الصلب, تتوفر العديد من الخيارات:\n" #~ "\n" #~ " * \"استخدام المساحة الفارغة\": هذا الخيار سيقوم بعملية تجزئة آلية\n" #~ "للأقراص الصلبة الفارغة. اذا استخدمت هذا الخيار, لن تكون هناك اشعارات\n" #~ "أخرى.\n" #~ " * \"استخدام التجزئة الموجودة\": يكون المعالج قد اكتشف تجزئة أو أكثر من\n" #~ "تجزئات لينكس على القرص الصلب. اذا كنت تريد استخدامها, اختر هذا\n" #~ "الخيار. سيتم بعد ذلك سؤالك عن نقاط التحميل المرتبطة بكل\n" #~ "تجزئة. يتم اختيار نقاط التجزئة المعتادة افتراضياً,\n" #~ "و ?غلب المستخدمين فإنها فكرة جيدة تركها كما هي.\n" #~ "\n" #~ " * \"استخدام المساحة الفارغة على تجزئة Windows\": اذا\n" #~ "كان Microsoft Windows مثبت على القرص الصلب و يحتل كل المساحة التي عليه,\n" #~ "ستحتاج الى انشاء مساحة فارغة لبيانات لينكس. لعمل ذلك يمكنك حذف\n" #~ "تجزئة و بيانات Microsoft Windows (انظر حل ``ازالة كل القرص'')\n" #~ "أو قم بإعادة تحجيم تجزئة Microsoft Windows FAT. يمكن عمل اعادة التحجيم\n" #~ "دون أي خسارة للبيانات, لكن يجب عليك قبل ذلك بإزالة تجزئة القرص " #~ "(defragmenting)\n" #~ "الذي يستخدم تنسيق FAT. نسخ بياناتك احتياطياً يفضّل\n" #~ "بشدة.. استخدام هذا الخيار منصوح به اذا كنت تريد استخدام \n" #~ "كل من Mandrake Linux و Microsoft Windows على نفس الكمبيوتر.\n" #~ "\n" #~ " قبل اختيارك لهذا الخيار, عليك أن تعلم أنه بعد هذا\n" #~ "ا?جراء, ستتقلص مساحة تجزئة Microsoft Windows عن ما قبل\n" #~ "ستكون لديك مساحة فارغة أقل على Microsoft Windows\n" #~ "لتخزين بياناتك و تثبيت برامج جديدة.\n" #~ "\n" #~ " * \"مسح كل القرص\": اذا كنت تريد حذف كل البيانات و كل التجزئات\n" #~ "الموجودة على القرص الصلب و ابدالها بنظام Mandrake Linux الجديد\n" #~ "الخاص بك, اختر هذا الخيار. كن حذراً, ?نك لن تتمكن من التراجع\n" #~ "بعد أن تقوم بالتأكيد.\n" #~ "\n" #~ " !!! اذا اخترت هذا الخيار سيتم حذف كل البيانات الموجودة على القرص. !!\n" #~ "\n" #~ " * \"حذف Windows\": سيقوم هذا الخيار ببساطة بمحو كل شء على القرص و\n" #~ "يبدأ التثبيت من الصفر. ستضيع كل البيانات على\n" #~ "القرص.\n" #~ "\n" #~ " * \"تجزئة مخصصة للقرص\": اختر هذا الخيار اذا كنت تريد\n" #~ "تقسيم القرص الصلب بشكل يدوي. كن حذراً -- هذا الخيار قوي\n" #~ "لكنه خطير و من الممكن أن تفقد بياناتك بسهولة. لهذا فإن\n" #~ "هذا الخيار مفضّل فقط اذا كنت قد قمت بشئ مماثل من فبل \n" #~ "و لديك بعض الخبرة. لمزيد من التعليمات حول استخدام أداة DiskDrake\n" #~ "راجع قسم ``ادارة التجزئات'' في\n" #~ "``دليل المبتدئ''." #~ msgid "" #~ "This step is used to choose which services you wish to start at boot " #~ "time.\n" #~ "\n" #~ "DrakX will list all the services available on the current installation.\n" #~ "Review each one carefully and uncheck those which are not always needed " #~ "at\n" #~ "boot time.\n" #~ "\n" #~ "A short explanatory text will be displayed about a service when it is\n" #~ "selected. However, if you are not sure whether a service is useful or " #~ "not,\n" #~ "it is safer to leave the default behavior.\n" #~ "\n" #~ "!! At this stage, be very careful if you intend to use your machine as a\n" #~ "server: you will probably not want to start any services that you do not\n" #~ "need. Please remember that several services can be dangerous if they are\n" #~ "enabled on a server. In general, select only the services you really " #~ "need.\n" #~ "!!" #~ msgstr "" #~ "هذه الخطوة هي ?ختيار الخدمات التي سيتم تشغيلها عند بدء التشغيل.\n" #~ "\n" #~ "سيقوم DrakX بعرض قائمة بكل الخدمات المتوفرة في هذا التثبيت.\n" #~ "راجع كل خدمة بتمعن و قم بإزالة التأشير من تلك الخدمات التي ? تحتاجها\n" #~ "بشكل دائم عند ا?قلاع.\n" #~ "\n" #~ "سيتم عرض شرح قصير حول الخدمة عند\n" #~ "اختيارها. عموماً, اذا لم تكن متأكد ما اذا كانت الخدمة مفيدة أم ?,\n" #~ "فمن ا?فضل ترك الخيار ا?فتراضي.\n" #~ "\n" #~ "!! في هذه المرحلة كن حذراُ اذا كنت تريد استخدام ماكينتك\n" #~ "كخادم: ربما لن تريد بدء أي خدمات ? تحتاجها.\n" #~ "فضلاً تذكر أن العديد من الخدمات قد تكون خطرة اذا كانت\n" #~ "متاحة على الخادم. بشكل عام اختر فقط الخدمات التي تحتاجها.\n" #~ "!!" #~ msgid "" #~ "\"Printer\": clicking on the \"No Printer\" button will open the printer\n" #~ "configuration wizard. Consult the corresponding chapter of the ``Starter\n" #~ "Guide'' for more information on how to setup a new printer. The " #~ "interface\n" #~ "presented there is similar to the one used during installation." #~ msgstr "" #~ "\"الطابعة\": النقر على \"لا طابعة\" سيفتح معالج تهيئة\n" #~ "الطابعة. اقرأ الفضل المختص في ``دليل المبتدئ''\n" #~ "لكزيد من المعلومات عن كيفية اعداد طابعة جديدة. الواجهة\n" #~ "هناك مماثلة لتلك المستخدمة أثناء التثبين." #~ msgid "" #~ "The following printers are configured. Double-click on a printer to " #~ "change its settings; to make it the default printer; to view information " #~ "about it; or to make a printer on a remote CUPS server available for Star " #~ "Office/OpenOffice.org/GIMP." #~ msgstr "" #~ "تمت تهيئة الطابعات الآتية. انقر نقرة مزدوجة على الطابعة لتغيير اعداداتها " #~ "لجعلها طابعة افتراضية أو لرؤية معلومات حولها أو لجعل اطابعة على خادم CUPS " #~ "البعيد متوفرة لـStar Office/OpenOffice.org/GIMP." #~ msgid "" #~ "You are about to configure your computer to install a PXE server as a " #~ "DHCP server\n" #~ "and a TFTP server to build an installation server.\n" #~ "With that feature, other computers on your local network will be " #~ "installable using from this computer.\n" #~ "\n" #~ "Make sure you have configured your Network/Internet access using " #~ "drakconnect before going any further.\n" #~ "\n" #~ "Note: you need a dedicated Network Adapter to set up a Local Area Network " #~ "(LAN)." #~ msgstr "" #~ "أنت على وشك تهيئة جهازك لتثبيت خادم PXE كخادم DHCP\n" #~ "و خادم TFTP لبناء خادم تثبيت.\n" #~ "باستخدام هذه الميزة تكون الحواسيب الأخرى على الشبكة المحلية قابلة للتثبيت " #~ "من هذا الجهاز.\n" #~ "\n" #~ "تأكد من أنك قمت بتهيئة الشبكة/الإنترنت باستخدام drakconnect قبل " #~ "المتابعة.\n" #~ "\n" #~ "ملحوظة: تحتاج الى موائم شبكة مخصص لإعداد الشبكة المحلية (LAN)." #~ msgid "" #~ "The cpu frequency in Mhz (Mega herz which in first approximation may be " #~ "coarsely assimilated to number of instructions the cpu is able to execute " #~ "per second)" #~ msgstr "" #~ "تردد المعالج بالميغاهيرتز (الميغاهيرتز تشير الى العدد التقريبي من " #~ "التعليمات التي يستطيع المعالج تنفيذها في الثانية الواحدة)" #~ msgid "" #~ "Please enter your host name if you know it.\n" #~ "Some DHCP servers require the hostname to work.\n" #~ "Your host name should be a fully-qualified host name,\n" #~ "such as ``mybox.mylab.myco.com''." #~ msgstr "" #~ "فضلاً أدخل اسم المستضيف اذا كنت تعرفه.\n" #~ "بعض خادمات DHCP تحتاج الى اسم المستضيق كي تعمل.\n" #~ "يجب أن يكون اسم المستضيف صالحاً و كاملاً,\n" #~ "مثل ``mybox.mylab.myco.com''." #~ msgid "" #~ "The classic bug sound tester is to run the following commands:\n" #~ "\n" #~ "\n" #~ "- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card " #~ "use\n" #~ "by default\n" #~ "\n" #~ "- \"grep snd-slot /etc/modules.conf\" will tell you what driver it\n" #~ "currently uses\n" #~ "\n" #~ "- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n" #~ "loaded or not\n" #~ "\n" #~ "- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" " #~ "will\n" #~ "tell you if sound and alsa services're configured to be run on\n" #~ "initlevel 3\n" #~ "\n" #~ "- \"aumix -q\" will tell you if the sound volume is muted or not\n" #~ "\n" #~ "- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound " #~ "card.\n" #~ msgstr "" #~ "The classic bug sound tester is to run the following commands:\n" #~ "\n" #~ "\n" #~ "- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card " #~ "use\n" #~ "by default\n" #~ "\n" #~ "- \"grep snd-slot /etc/modules.conf\" will tell you what driver it\n" #~ "currently uses\n" #~ "\n" #~ "- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n" #~ "loaded or not\n" #~ "\n" #~ "- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" " #~ "will\n" #~ "tell you if sound and alsa services're configured to be run on\n" #~ "initlevel 3\n" #~ "\n" #~ "- \"aumix -q\" will tell you if the sound volume is muted or not\n" #~ "\n" #~ "- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound " #~ "card.\n" #~ msgid "DrakFloppy Error: %s" #~ msgstr "خطأ فى دريك لعمل قرص بدء النظام: %s" #~ msgid "Launch Aurora at boot time" #~ msgstr "شغّل Aurora عند الإقلاع" #~ msgid "Traditional Gtk+ Monitor" #~ msgstr "شاشة Gtk+ التقليدية" #~ msgid "Traditional Monitor" #~ msgstr "شاشة تقليدية" #~ msgid "NewStyle Monitor" #~ msgstr "شاشة NewStyle" #~ msgid "NewStyle Categorizing Monitor" #~ msgstr "شاشة NewStyle التصنيفية" #~ msgid "Secure Connection" #~ msgstr "وصلة آمنة" #~ msgid "FTP Connection" #~ msgstr "وصلة FTP" #~ msgid "Mail/Groupware/News" #~ msgstr "بريد/أدوات مجموعات/أخبار" #~ msgid "Postfix mail server, Inn news server" #~ msgstr "خادم البريد Postfix, خادم الأخبار Inn" #~ msgid "/Options" #~ msgstr "/خيارات" #~ msgid "/Autodetect jazz drives" #~ msgstr "/تحقق آلي من سواقات Jazz" #~ msgid "/Autodetect modems" #~ msgstr "/تحقق آلي من أجهزة المودم" #~ msgid "/Autodetect printers" #~ msgstr "/تحقق آلي من الطابعات" #~ msgid "" #~ "The partition you've selected to add as root (/) is physically located " #~ "beyond\n" #~ "the 1024th cylinder of the hard drive, and you have no /boot partition.\n" #~ "If you plan to use the LILO boot manager, be careful to add a /boot " #~ "partition" #~ msgstr "" #~ "التجزئة التي اخترتها كتجزئة جذرية (/) موجودة مادياً بعد\n" #~ "الإسطوانة 1024 من القرص الصلب, و ليست لديك تجزئة /boot.\n" #~ "اذا كنت تنوي استخدام LILO كمدير اقلاع فلا تنسى اضافة تجزئة /boot" #~ msgid "" #~ "Sorry I won't accept to create /boot so far onto the drive (on a cylinder " #~ "> 1024).\n" #~ "Either you use LILO and it won't work, or you don't use LILO and you " #~ "don't need /boot" #~ msgstr "" #~ "عفواً, لن أقبل انشاء دليل /boot بهذا البعد على القرص (على أسطوانة أكبر من " #~ "1024).\n" #~ "إما أن تستخدم LILO و لن يعمل هذا, أو لا تستخدم LILO و لن تحتاج الى /boot" #~ msgid "Install system updates" #~ msgstr "تثبيت تحديثات النظام" #~ msgid "Do you want to configure another printer?" #~ msgstr "هل تريد تجربة إعداد طابعة أخرى؟" #~ msgid "Know how to use this printer" #~ msgstr "اعرف كيف تستخدم هذه الطابعة" #~ msgid "Preparing Printerdrake..." #~ msgstr "جاري تجهيز Printerdrake..." #~ msgid "192.168.100.0/255.255.255.0\n" #~ msgstr "192.168.100.0/255.255.255.0\n" #~ msgid "192.168.100.0/24\n" #~ msgstr "192.168.100.0/24\n" #~ msgid "10.1.*\n" #~ msgstr "10.1.*\n" #~ msgid "10.0.0.*\n" #~ msgstr "10.0.0.*\n" #~ msgid "192.168.100.194\n" #~ msgstr "192.168.100.194\n" #~ msgid "Reading printer data ..." #~ msgstr "جاري قراءة بيانات الطابعة ..."