# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR Free Software Foundation, Inc. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "POT-Creation-Date: 2002-02-21 12:50+0100\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=CHARSET\n" "Content-Transfer-Encoding: 8-bit\n" #: ../../Xconfigurator.pm_.c:242 msgid "Configure all heads independently" msgstr "" #: ../../Xconfigurator.pm_.c:243 msgid "Use Xinerama extension" msgstr "" #: ../../Xconfigurator.pm_.c:246 #, c-format msgid "Configure only card \"%s\" (%s)" msgstr "" #: ../../Xconfigurator.pm_.c:249 msgid "Multi-head configuration" msgstr "" #: ../../Xconfigurator.pm_.c:250 msgid "" "Your system support multiple head configuration.\n" "What do you want to do?" msgstr "" #: ../../Xconfigurator.pm_.c:261 msgid "Graphic card" msgstr "" #: ../../Xconfigurator.pm_.c:262 msgid "Select a graphic card" msgstr "" #: ../../Xconfigurator.pm_.c:286 msgid "Choose a X server" msgstr "" #: ../../Xconfigurator.pm_.c:286 msgid "X server" msgstr "" #: ../../Xconfigurator.pm_.c:293 msgid "Choose a X driver" msgstr "" #: ../../Xconfigurator.pm_.c:293 msgid "X driver" msgstr "" #: ../../Xconfigurator.pm_.c:353 ../../Xconfigurator.pm_.c:359 #: ../../Xconfigurator.pm_.c:409 ../../Xconfigurator.pm_.c:1486 #, c-format msgid "XFree %s" msgstr "" #: ../../Xconfigurator.pm_.c:356 msgid "Which configuration of XFree do you want to have?" msgstr "" #: ../../Xconfigurator.pm_.c:367 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" #: ../../Xconfigurator.pm_.c:369 ../../Xconfigurator.pm_.c:402 #, c-format msgid "Your card can have 3D hardware acceleration support with XFree %s." msgstr "" #: ../../Xconfigurator.pm_.c:371 ../../Xconfigurator.pm_.c:404 #: ../../Xconfigurator.pm_.c:1486 #, c-format msgid "XFree %s with 3D hardware acceleration" msgstr "" #: ../../Xconfigurator.pm_.c:379 ../../Xconfigurator.pm_.c:393 #, c-format msgid "" "Your card can have 3D hardware acceleration support with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" #: ../../Xconfigurator.pm_.c:381 ../../Xconfigurator.pm_.c:395 #, c-format msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration" msgstr "" #: ../../Xconfigurator.pm_.c:390 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" #: ../../Xconfigurator.pm_.c:410 msgid "Xpmac (installation display driver)" msgstr "" #: ../../Xconfigurator.pm_.c:414 msgid "XFree configuration" msgstr "" #: ../../Xconfigurator.pm_.c:485 msgid "Select the memory size of your graphic card" msgstr "" #: ../../Xconfigurator.pm_.c:539 msgid "Choose options for server" msgstr "" #: ../../Xconfigurator.pm_.c:563 msgid "Choose a monitor" msgstr "" #: ../../Xconfigurator.pm_.c:563 msgid "Monitor" msgstr "" #: ../../Xconfigurator.pm_.c:566 msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" #: ../../Xconfigurator.pm_.c:573 msgid "Horizontal refresh rate" msgstr "" #: ../../Xconfigurator.pm_.c:574 msgid "Vertical refresh rate" msgstr "" #: ../../Xconfigurator.pm_.c:611 msgid "Monitor not configured" msgstr "" #: ../../Xconfigurator.pm_.c:614 msgid "Graphic card not configured yet" msgstr "" #: ../../Xconfigurator.pm_.c:617 msgid "Resolutions not chosen yet" msgstr "" #: ../../Xconfigurator.pm_.c:635 msgid "Do you want to test the configuration?" msgstr "" #: ../../Xconfigurator.pm_.c:639 msgid "Warning: testing this graphic card may freeze your computer" msgstr "" #: ../../Xconfigurator.pm_.c:642 msgid "Test of the configuration" msgstr "" #: ../../Xconfigurator.pm_.c:681 ../../Xconfigurator.pm_.c:693 msgid "" "\n" "try to change some parameters" msgstr "" #: ../../Xconfigurator.pm_.c:681 ../../Xconfigurator.pm_.c:693 msgid "An error has occurred:" msgstr "" #: ../../Xconfigurator.pm_.c:717 #, c-format msgid "Leaving in %d seconds" msgstr "" #: ../../Xconfigurator.pm_.c:728 msgid "Is this the correct setting?" msgstr "" #: ../../Xconfigurator.pm_.c:737 msgid "An error has occurred, try to change some parameters" msgstr "" #: ../../Xconfigurator.pm_.c:808 msgid "Resolution" msgstr "" #: ../../Xconfigurator.pm_.c:859 msgid "Choose the resolution and the color depth" msgstr "" #: ../../Xconfigurator.pm_.c:861 #, c-format msgid "Graphic card: %s" msgstr "" #: ../../Xconfigurator.pm_.c:862 #, c-format msgid "XFree86 server: %s" msgstr "" #: ../../Xconfigurator.pm_.c:878 ../../printerdrake.pm_.c:2400 #: ../../standalone/draknet_.c:275 ../../standalone/draknet_.c:278 msgid "Expert Mode" msgstr "" #: ../../Xconfigurator.pm_.c:879 msgid "Show all" msgstr "" #: ../../Xconfigurator.pm_.c:924 msgid "Resolutions" msgstr "" #: ../../Xconfigurator.pm_.c:1488 #, c-format msgid "Keyboard layout: %s\n" msgstr "" #: ../../Xconfigurator.pm_.c:1489 #, c-format msgid "Mouse type: %s\n" msgstr "" #: ../../Xconfigurator.pm_.c:1490 #, c-format msgid "Mouse device: %s\n" msgstr "" #: ../../Xconfigurator.pm_.c:1491 #, c-format msgid "Monitor: %s\n" msgstr "" #: ../../Xconfigurator.pm_.c:1492 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "" #: ../../Xconfigurator.pm_.c:1493 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "" #: ../../Xconfigurator.pm_.c:1494 #, c-format msgid "Graphic card: %s\n" msgstr "" #: ../../Xconfigurator.pm_.c:1495 #, c-format msgid "Graphic card identification: %s\n" msgstr "" #: ../../Xconfigurator.pm_.c:1496 #, c-format msgid "Graphic memory: %s kB\n" msgstr "" #: ../../Xconfigurator.pm_.c:1498 #, c-format msgid "Color depth: %s\n" msgstr "" #: ../../Xconfigurator.pm_.c:1499 #, c-format msgid "Resolution: %s\n" msgstr "" #: ../../Xconfigurator.pm_.c:1501 #, c-format msgid "XFree86 server: %s\n" msgstr "" #: ../../Xconfigurator.pm_.c:1502 #, c-format msgid "XFree86 driver: %s\n" msgstr "" #: ../../Xconfigurator.pm_.c:1520 msgid "Preparing X-Window configuration" msgstr "" #: ../../Xconfigurator.pm_.c:1540 msgid "What do you want to do?" msgstr "" #: ../../Xconfigurator.pm_.c:1545 msgid "Change Monitor" msgstr "" #: ../../Xconfigurator.pm_.c:1546 msgid "Change Graphic card" msgstr "" #: ../../Xconfigurator.pm_.c:1549 msgid "Change Server options" msgstr "" #: ../../Xconfigurator.pm_.c:1550 msgid "Change Resolution" msgstr "" #: ../../Xconfigurator.pm_.c:1551 msgid "Show information" msgstr "" #: ../../Xconfigurator.pm_.c:1552 msgid "Test again" msgstr "" #: ../../Xconfigurator.pm_.c:1553 ../../printerdrake.pm_.c:2403 #: ../../standalone/logdrake_.c:217 msgid "Quit" msgstr "" #: ../../Xconfigurator.pm_.c:1561 #, c-format msgid "" "Keep the changes?\n" "Current configuration is:\n" "\n" "%s" msgstr "" #: ../../Xconfigurator.pm_.c:1582 #, c-format msgid "Please relog into %s to activate the changes" msgstr "" #: ../../Xconfigurator.pm_.c:1597 msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "" #: ../../Xconfigurator.pm_.c:1601 msgid "X at startup" msgstr "" #: ../../Xconfigurator.pm_.c:1602 msgid "" "I can set up your computer to automatically start X upon booting.\n" "Would you like X to start when you reboot?" msgstr "" #: ../../Xconfigurator_consts.pm_.c:6 msgid "256 colors (8 bits)" msgstr "" #: ../../Xconfigurator_consts.pm_.c:7 msgid "32 thousand colors (15 bits)" msgstr "" #: ../../Xconfigurator_consts.pm_.c:8 msgid "65 thousand colors (16 bits)" msgstr "" #: ../../Xconfigurator_consts.pm_.c:9 msgid "16 million colors (24 bits)" msgstr "" #: ../../Xconfigurator_consts.pm_.c:10 msgid "4 billion colors (32 bits)" msgstr "" #: ../../Xconfigurator_consts.pm_.c:109 msgid "256 kB" msgstr "" #: ../../Xconfigurator_consts.pm_.c:110 msgid "512 kB" msgstr "" #: ../../Xconfigurator_consts.pm_.c:111 msgid "1 MB" msgstr "" #: ../../Xconfigurator_consts.pm_.c:112 msgid "2 MB" msgstr "" #: ../../Xconfigurator_consts.pm_.c:113 msgid "4 MB" msgstr "" #: ../../Xconfigurator_consts.pm_.c:114 msgid "8 MB" msgstr "" #: ../../Xconfigurator_consts.pm_.c:115 msgid "16 MB" msgstr "" #: ../../Xconfigurator_consts.pm_.c:116 msgid "32 MB" msgstr "" #: ../../Xconfigurator_consts.pm_.c:117 msgid "64 MB or more" msgstr "" #: ../../Xconfigurator_consts.pm_.c:125 msgid "Standard VGA, 640x480 at 60 Hz" msgstr "" #: ../../Xconfigurator_consts.pm_.c:126 msgid "Super VGA, 800x600 at 56 Hz" msgstr "" #: ../../Xconfigurator_consts.pm_.c:127 msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)" msgstr "" #: ../../Xconfigurator_consts.pm_.c:128 msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz" msgstr "" #: ../../Xconfigurator_consts.pm_.c:129 msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz" msgstr "" #: ../../Xconfigurator_consts.pm_.c:130 msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz" msgstr "" #: ../../Xconfigurator_consts.pm_.c:131 msgid "High Frequency SVGA, 1024x768 at 70 Hz" msgstr "" #: ../../Xconfigurator_consts.pm_.c:132 msgid "Multi-frequency that can do 1280x1024 at 60 Hz" msgstr "" #: ../../Xconfigurator_consts.pm_.c:133 msgid "Multi-frequency that can do 1280x1024 at 74 Hz" msgstr "" #: ../../Xconfigurator_consts.pm_.c:134 msgid "Multi-frequency that can do 1280x1024 at 76 Hz" msgstr "" #: ../../Xconfigurator_consts.pm_.c:135 msgid "Monitor that can do 1600x1200 at 70 Hz" msgstr "" #: ../../Xconfigurator_consts.pm_.c:136 msgid "Monitor that can do 1600x1200 at 76 Hz" msgstr "" #: ../../any.pm_.c:113 ../../any.pm_.c:138 msgid "First sector of boot partition" msgstr "" #: ../../any.pm_.c:113 ../../any.pm_.c:138 ../../any.pm_.c:215 msgid "First sector of drive (MBR)" msgstr "" #: ../../any.pm_.c:117 msgid "SILO Installation" msgstr "" #: ../../any.pm_.c:118 ../../any.pm_.c:131 msgid "Where do you want to install the bootloader?" msgstr "" #: ../../any.pm_.c:130 msgid "LILO/grub Installation" msgstr "" #: ../../any.pm_.c:142 ../../any.pm_.c:156 msgid "SILO" msgstr "" #: ../../any.pm_.c:144 msgid "LILO with text menu" msgstr "" #: ../../any.pm_.c:145 ../../any.pm_.c:156 msgid "LILO with graphical menu" msgstr "" #: ../../any.pm_.c:148 msgid "Grub" msgstr "" #: ../../any.pm_.c:152 msgid "Boot from DOS/Windows (loadlin)" msgstr "" #: ../../any.pm_.c:154 ../../any.pm_.c:156 msgid "Yaboot" msgstr "" #: ../../any.pm_.c:163 ../../any.pm_.c:195 msgid "Bootloader main options" msgstr "" #: ../../any.pm_.c:164 ../../any.pm_.c:196 msgid "Bootloader to use" msgstr "" #: ../../any.pm_.c:166 msgid "Bootloader installation" msgstr "" #: ../../any.pm_.c:168 ../../any.pm_.c:198 msgid "Boot device" msgstr "" #: ../../any.pm_.c:169 msgid "LBA (doesn't work on old BIOSes)" msgstr "" #: ../../any.pm_.c:170 msgid "Compact" msgstr "" #: ../../any.pm_.c:170 msgid "compact" msgstr "" #: ../../any.pm_.c:171 ../../any.pm_.c:280 msgid "Video mode" msgstr "" #: ../../any.pm_.c:173 msgid "Delay before booting default image" msgstr "" #: ../../any.pm_.c:175 ../../any.pm_.c:777 #: ../../install_steps_interactive.pm_.c:1095 ../../network/modem.pm_.c:48 #: ../../printerdrake.pm_.c:729 ../../printerdrake.pm_.c:805 #: ../../standalone/draknet_.c:624 msgid "Password" msgstr "" #: ../../any.pm_.c:176 ../../any.pm_.c:778 #: ../../install_steps_interactive.pm_.c:1096 msgid "Password (again)" msgstr "" #: ../../any.pm_.c:177 msgid "Restrict command line options" msgstr "" #: ../../any.pm_.c:177 msgid "restrict" msgstr "" #: ../../any.pm_.c:179 msgid "Clean /tmp at each boot" msgstr "" #: ../../any.pm_.c:180 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "" #: ../../any.pm_.c:182 msgid "Enable multi profiles" msgstr "" #: ../../any.pm_.c:186 msgid "Give the ram size in MB" msgstr "" #: ../../any.pm_.c:188 msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "" #: ../../any.pm_.c:189 ../../any.pm_.c:754 #: ../../diskdrake/interactive.pm_.c:1132 #: ../../install_steps_interactive.pm_.c:1090 msgid "Please try again" msgstr "" #: ../../any.pm_.c:189 ../../any.pm_.c:754 #: ../../install_steps_interactive.pm_.c:1090 msgid "The passwords do not match" msgstr "" #: ../../any.pm_.c:197 msgid "Init Message" msgstr "" #: ../../any.pm_.c:199 msgid "Open Firmware Delay" msgstr "" #: ../../any.pm_.c:200 msgid "Kernel Boot Timeout" msgstr "" #: ../../any.pm_.c:201 msgid "Enable CD Boot?" msgstr "" #: ../../any.pm_.c:202 msgid "Enable OF Boot?" msgstr "" #: ../../any.pm_.c:203 msgid "Default OS?" msgstr "" #: ../../any.pm_.c:237 msgid "" "Here are the different entries.\n" "You can add some more or change the existing ones." msgstr "" #: ../../any.pm_.c:247 ../../standalone/drakbackup_.c:751 #: ../../standalone/drakbackup_.c:860 ../../standalone/drakfont_.c:769 #: ../../standalone/drakfont_.c:806 msgid "Add" msgstr "" #: ../../any.pm_.c:247 ../../any.pm_.c:765 ../../diskdrake/hd_gtk.pm_.c:153 #: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86 #: ../../interactive_http.pm_.c:153 msgid "Done" msgstr "" #: ../../any.pm_.c:247 msgid "Modify" msgstr "" #: ../../any.pm_.c:255 msgid "Which type of entry do you want to add?" msgstr "" #: ../../any.pm_.c:256 ../../standalone/drakbackup_.c:894 msgid "Linux" msgstr "" #: ../../any.pm_.c:256 msgid "Other OS (SunOS...)" msgstr "" #: ../../any.pm_.c:257 msgid "Other OS (MacOS...)" msgstr "" #: ../../any.pm_.c:257 msgid "Other OS (windows...)" msgstr "" #: ../../any.pm_.c:276 msgid "Image" msgstr "" #: ../../any.pm_.c:277 ../../any.pm_.c:288 msgid "Root" msgstr "" #: ../../any.pm_.c:278 ../../any.pm_.c:307 msgid "Append" msgstr "" #: ../../any.pm_.c:282 msgid "Initrd" msgstr "" #: ../../any.pm_.c:283 msgid "Read-write" msgstr "" #: ../../any.pm_.c:290 msgid "Table" msgstr "" #: ../../any.pm_.c:291 msgid "Unsafe" msgstr "" #: ../../any.pm_.c:298 ../../any.pm_.c:303 ../../any.pm_.c:306 msgid "Label" msgstr "" #: ../../any.pm_.c:300 ../../any.pm_.c:311 msgid "Default" msgstr "" #: ../../any.pm_.c:308 msgid "Initrd-size" msgstr "" #: ../../any.pm_.c:310 msgid "NoVideo" msgstr "" #: ../../any.pm_.c:318 msgid "Remove entry" msgstr "" #: ../../any.pm_.c:321 msgid "Empty label not allowed" msgstr "" #: ../../any.pm_.c:322 msgid "You must specify a kernel image" msgstr "" #: ../../any.pm_.c:322 msgid "You must specify a root partition" msgstr "" #: ../../any.pm_.c:323 msgid "This label is already used" msgstr "" #: ../../any.pm_.c:638 #, c-format msgid "Found %s %s interfaces" msgstr "" #: ../../any.pm_.c:639 msgid "Do you have another one?" msgstr "" #: ../../any.pm_.c:640 #, c-format msgid "Do you have any %s interfaces?" msgstr "" #: ../../any.pm_.c:642 ../../any.pm_.c:813 ../../interactive.pm_.c:124 #: ../../my_gtk.pm_.c:1018 msgid "No" msgstr "" #: ../../any.pm_.c:642 ../../any.pm_.c:812 ../../interactive.pm_.c:124 #: ../../my_gtk.pm_.c:1018 msgid "Yes" msgstr "" #: ../../any.pm_.c:643 msgid "See hardware info" msgstr "" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: ../../any.pm_.c:677 #, c-format msgid "Installing driver for %s card %s" msgstr "" #: ../../any.pm_.c:678 #, c-format msgid "(module %s)" msgstr "" #. -PO: the %s is the driver type (scsi, network, sound,...) #: ../../any.pm_.c:689 #, c-format msgid "Which %s driver should I try?" msgstr "" #: ../../any.pm_.c:697 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" #: ../../any.pm_.c:702 msgid "Autoprobe" msgstr "" #: ../../any.pm_.c:702 msgid "Specify options" msgstr "" #: ../../any.pm_.c:706 #, c-format msgid "You may now provide its options to module %s." msgstr "" #: ../../any.pm_.c:712 #, c-format msgid "" "You may now provide its options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" #: ../../any.pm_.c:715 msgid "Module options:" msgstr "" #: ../../any.pm_.c:726 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" #: ../../any.pm_.c:742 msgid "access to X programs" msgstr "" #: ../../any.pm_.c:743 msgid "access to rpm tools" msgstr "" #: ../../any.pm_.c:744 msgid "allow \"su\"" msgstr "" #: ../../any.pm_.c:745 msgid "access to administrative files" msgstr "" #: ../../any.pm_.c:750 #, c-format msgid "(already added %s)" msgstr "" #: ../../any.pm_.c:755 msgid "This password is too simple" msgstr "" #: ../../any.pm_.c:756 msgid "Please give a user name" msgstr "" #: ../../any.pm_.c:757 msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "" #: ../../any.pm_.c:758 msgid "This user name is already added" msgstr "" #: ../../any.pm_.c:762 msgid "Add user" msgstr "" #: ../../any.pm_.c:763 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" #: ../../any.pm_.c:764 msgid "Accept user" msgstr "" #: ../../any.pm_.c:775 msgid "Real name" msgstr "" #: ../../any.pm_.c:776 ../../printerdrake.pm_.c:728 #: ../../printerdrake.pm_.c:804 msgid "User name" msgstr "" #: ../../any.pm_.c:779 msgid "Shell" msgstr "" #: ../../any.pm_.c:781 msgid "Icon" msgstr "" #: ../../any.pm_.c:809 msgid "Autologin" msgstr "" #: ../../any.pm_.c:810 msgid "" "I can set up your computer to automatically log on one user.\n" "Do you want to use this feature?" msgstr "" #: ../../any.pm_.c:814 msgid "Choose the default user:" msgstr "" #: ../../any.pm_.c:815 msgid "Choose the window manager to run:" msgstr "" #: ../../any.pm_.c:825 msgid "Please choose a language to use." msgstr "" #: ../../any.pm_.c:827 msgid "You can choose other languages that will be available after install" msgstr "" #: ../../any.pm_.c:839 ../../install_steps_interactive.pm_.c:715 #: ../../standalone/drakxtv_.c:43 msgid "All" msgstr "" #: ../../any.pm_.c:926 msgid "Allow all users" msgstr "" #: ../../any.pm_.c:926 ../../install_steps_interactive.pm_.c:515 msgid "Custom" msgstr "" #: ../../any.pm_.c:926 msgid "No sharing" msgstr "" #: ../../any.pm_.c:936 ../../network/smbnfs.pm_.c:45 #, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "" #: ../../any.pm_.c:939 msgid "You can export using NFS or Samba. Which one do you want" msgstr "" #: ../../any.pm_.c:947 ../../network/smbnfs.pm_.c:49 #, c-format msgid "Mandatory package %s is missing" msgstr "" #: ../../any.pm_.c:967 msgid "Launch userdrake" msgstr "" #: ../../any.pm_.c:969 msgid "" "The per-user sharing uses the group \"fileshare\". \n" "You can use userdrake to add a user in this group." msgstr "" #: ../../any.pm_.c:1006 msgid "Welcome To Crackers" msgstr "" #: ../../any.pm_.c:1007 msgid "Poor" msgstr "" #: ../../any.pm_.c:1008 msgid "Low" msgstr "" #: ../../any.pm_.c:1009 msgid "Medium" msgstr "" #: ../../any.pm_.c:1010 msgid "High" msgstr "" #: ../../any.pm_.c:1011 msgid "Paranoid" msgstr "" #: ../../any.pm_.c:1014 msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive: it must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" #: ../../any.pm_.c:1017 msgid "" "Password are now enabled, but use as a networked computer is still not " "recommended." msgstr "" #: ../../any.pm_.c:1018 msgid "" "Few improvements for this security level, the main one is that there are\n" "more security warnings and checks." msgstr "" #: ../../any.pm_.c:1020 msgid "" "This is the standard security recommended for a computer that will be used\n" "to connect to the Internet as a client. There are now security checks. " msgstr "" #: ../../any.pm_.c:1022 msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which accept\n" "connections from many clients. " msgstr "" #: ../../any.pm_.c:1025 msgid "" "Based on the previous level, but the system is entirely closed.\n" "Security features are at their maximum." msgstr "" #: ../../any.pm_.c:1031 msgid "Choose security level" msgstr "" #: ../../any.pm_.c:1034 msgid "Security level" msgstr "" #: ../../any.pm_.c:1036 msgid "Use libsafe for servers" msgstr "" #: ../../any.pm_.c:1037 msgid "" "A library which defends against buffer overflow and format string attacks." msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: ../../bootloader.pm_.c:335 #, c-format msgid "" "Welcome to %s the operating system chooser!\n" "\n" "Choose an operating system in the list above or\n" "wait %d seconds for default boot.\n" "\n" msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:901 msgid "Welcome to GRUB the operating system chooser!" msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:904 #, c-format msgid "Use the %c and %c keys for selecting which entry is highlighted." msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:907 msgid "Press enter to boot the selected OS, 'e' to edit the" msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:910 msgid "commands before booting, or 'c' for a command-line." msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:913 #, c-format msgid "The highlighted entry will be booted automatically in %d seconds." msgstr "" #: ../../bootloader.pm_.c:917 msgid "not enough room in /boot" msgstr "" #. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows #. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language #: ../../bootloader.pm_.c:1017 msgid "Desktop" msgstr "" #. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows #: ../../bootloader.pm_.c:1019 msgid "Start Menu" msgstr "" #: ../../bootloader.pm_.c:1038 #, c-format msgid "You can't install the bootloader on a %s partition\n" msgstr "" #: ../../bootlook.pm_.c:46 msgid "no help implemented yet.\n" msgstr "" #: ../../bootlook.pm_.c:62 msgid "Boot Style Configuration" msgstr "" #: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101 msgid "/_File" msgstr "" #: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107 msgid "/File/_Quit" msgstr "" #: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107 msgid "Q" msgstr "" #: ../../bootlook.pm_.c:91 msgid "NewStyle Categorizing Monitor" msgstr "" #: ../../bootlook.pm_.c:92 msgid "NewStyle Monitor" msgstr "" #: ../../bootlook.pm_.c:93 msgid "Traditional Monitor" msgstr "" #: ../../bootlook.pm_.c:94 msgid "Traditional Gtk+ Monitor" msgstr "" #: ../../bootlook.pm_.c:95 msgid "Launch Aurora at boot time" msgstr "" #: ../../bootlook.pm_.c:100 msgid "Lilo/grub mode" msgstr "" #: ../../bootlook.pm_.c:103 #, c-format msgid "" "You are currently using %s as Boot Manager.\n" "Click on Configure to launch the setup wizard." msgstr "" #: ../../bootlook.pm_.c:105 ../../standalone/drakbackup_.c:1458 #: ../../standalone/drakbackup_.c:1467 ../../standalone/drakgw_.c:706 #: ../../standalone/tinyfirewall_.c:59 msgid "Configure" msgstr "" #: ../../bootlook.pm_.c:140 msgid "System mode" msgstr "" #: ../../bootlook.pm_.c:142 msgid "Launch the X-Window system at start" msgstr "" #: ../../bootlook.pm_.c:147 msgid "No, I don't want autologin" msgstr "" #: ../../bootlook.pm_.c:149 msgid "Yes, I want autologin with this (user, desktop)" msgstr "" #: ../../bootlook.pm_.c:159 ../../standalone/drakbackup_.c:2428 #: ../../standalone/drakbackup_.c:3332 ../../standalone/drakfont_.c:529 #: ../../standalone/drakfont_.c:635 ../../standalone/drakfont_.c:699 #: ../../standalone/drakfont_.c:745 ../../standalone/draknet_.c:109 #: ../../standalone/draknet_.c:141 ../../standalone/draknet_.c:297 #: ../../standalone/draknet_.c:435 ../../standalone/draknet_.c:521 #: ../../standalone/draknet_.c:564 ../../standalone/draknet_.c:665 #: ../../standalone/logdrake_.c:491 msgid "OK" msgstr "" #: ../../bootlook.pm_.c:160 ../../diskdrake/smbnfs_gtk.pm_.c:85 #: ../../install_steps_gtk.pm_.c:463 ../../install_steps_gtk.pm_.c:521 #: ../../install_steps_interactive.pm_.c:590 ../../interactive.pm_.c:134 #: ../../interactive.pm_.c:309 ../../interactive.pm_.c:341 #: ../../interactive_stdio.pm_.c:141 ../../my_gtk.pm_.c:687 #: ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019 #: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1554 #: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2251 #: ../../standalone/drakbackup_.c:2276 ../../standalone/drakbackup_.c:2297 #: ../../standalone/drakbackup_.c:2318 ../../standalone/drakbackup_.c:2336 #: ../../standalone/drakbackup_.c:2384 ../../standalone/drakbackup_.c:2404 #: ../../standalone/drakbackup_.c:2423 ../../standalone/drakfont_.c:747 #: ../../standalone/drakgw_.c:711 ../../standalone/draknet_.c:116 #: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290 #: ../../standalone/draknet_.c:537 ../../standalone/draknet_.c:679 #: ../../standalone/logdrake_.c:217 ../../standalone/logdrake_.c:498 #: ../../standalone/tinyfirewall_.c:65 msgid "Cancel" msgstr "" #: ../../bootlook.pm_.c:228 #, c-format msgid "can not open /etc/inittab for reading: %s" msgstr "" #: ../../common.pm_.c:94 msgid "GB" msgstr "" #: ../../common.pm_.c:94 msgid "KB" msgstr "" #: ../../common.pm_.c:94 msgid "MB" msgstr "" #: ../../common.pm_.c:102 msgid "TB" msgstr "" #: ../../common.pm_.c:110 #, c-format msgid "%d minutes" msgstr "" #: ../../common.pm_.c:112 msgid "1 minute" msgstr "" #: ../../common.pm_.c:114 #, c-format msgid "%d seconds" msgstr "" #: ../../common.pm_.c:159 msgid "Can't make screenshots before partitioning" msgstr "" #: ../../common.pm_.c:166 #, c-format msgid "Screenshots will be available after install in %s" msgstr "" #: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:39 msgid "France" msgstr "" #: ../../crypto.pm_.c:13 msgid "Costa Rica" msgstr "" #: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27 msgid "Belgium" msgstr "" #: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28 msgid "Czech Republic" msgstr "" #: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29 msgid "Germany" msgstr "" #: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30 msgid "Greece" msgstr "" #: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31 msgid "Norway" msgstr "" #: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32 msgid "Sweden" msgstr "" #: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34 msgid "Netherlands" msgstr "" #: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:39 msgid "Italy" msgstr "" #: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36 msgid "Austria" msgstr "" #: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67 msgid "United States" msgstr "" #: ../../diskdrake/hd_gtk.pm_.c:94 msgid "Please make a backup of your data first" msgstr "" #: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:888 #: ../../diskdrake/interactive.pm_.c:897 ../../diskdrake/interactive.pm_.c:951 msgid "Read carefully!" msgstr "" #: ../../diskdrake/hd_gtk.pm_.c:97 msgid "" "If you plan to use aboot, be carefull to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "" #: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325 #: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45 #: ../../install_steps.pm_.c:72 ../../install_steps_interactive.pm_.c:67 #: ../../install_steps_interactive.pm_.c:350 ../../interactive_http.pm_.c:119 #: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84 msgid "Error" msgstr "" #: ../../diskdrake/hd_gtk.pm_.c:151 msgid "Wizard" msgstr "" #: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24 msgid "Choose action" msgstr "" #: ../../diskdrake/hd_gtk.pm_.c:185 msgid "" "You have one big FAT partition\n" "(generally used by MicroSoft Dos/Windows).\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" #: ../../diskdrake/hd_gtk.pm_.c:188 msgid "Please click on a partition" msgstr "" #: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67 #: ../../install_steps_gtk.pm_.c:522 msgid "Details" msgstr "" #: ../../diskdrake/hd_gtk.pm_.c:320 msgid "Ext2" msgstr "" #: ../../diskdrake/hd_gtk.pm_.c:320 msgid "FAT" msgstr "" #: ../../diskdrake/hd_gtk.pm_.c:320 msgid "HFS" msgstr "" #: ../../diskdrake/hd_gtk.pm_.c:320 msgid "Journalised FS" msgstr "" #: ../../diskdrake/hd_gtk.pm_.c:320 msgid "SunOS" msgstr "" #: ../../diskdrake/hd_gtk.pm_.c:320 msgid "Swap" msgstr "" #: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1047 msgid "Empty" msgstr "" #: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:378 #: ../../install_steps_gtk.pm_.c:438 ../../mouse.pm_.c:162 #: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:943 msgid "Other" msgstr "" #: ../../diskdrake/hd_gtk.pm_.c:325 msgid "Filesystem types:" msgstr "" #: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386 msgid "Create" msgstr "" #: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365 #: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26 #: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17 msgid "Type" msgstr "" #: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344 #, c-format msgid "Use ``%s'' instead" msgstr "" #: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374 msgid "Delete" msgstr "" #: ../../diskdrake/hd_gtk.pm_.c:348 msgid "Use ``Unmount'' first" msgstr "" #: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "" #: ../../diskdrake/interactive.pm_.c:171 msgid "Choose a partition" msgstr "" #: ../../diskdrake/interactive.pm_.c:171 msgid "Choose another partition" msgstr "" #: ../../diskdrake/interactive.pm_.c:196 msgid "Exit" msgstr "" #: ../../diskdrake/interactive.pm_.c:218 msgid "Toggle to expert mode" msgstr "" #: ../../diskdrake/interactive.pm_.c:218 msgid "Toggle to normal mode" msgstr "" #: ../../diskdrake/interactive.pm_.c:218 msgid "Undo" msgstr "" #: ../../diskdrake/interactive.pm_.c:237 msgid "Continue anyway?" msgstr "" #: ../../diskdrake/interactive.pm_.c:242 msgid "Quit without saving" msgstr "" #: ../../diskdrake/interactive.pm_.c:242 msgid "Quit without writing the partition table?" msgstr "" #: ../../diskdrake/interactive.pm_.c:247 msgid "Do you want to save /etc/fstab modifications" msgstr "" #: ../../diskdrake/interactive.pm_.c:259 msgid "Auto allocate" msgstr "" #: ../../diskdrake/interactive.pm_.c:259 msgid "Clear all" msgstr "" #: ../../diskdrake/interactive.pm_.c:259 #: ../../install_steps_interactive.pm_.c:202 msgid "More" msgstr "" #: ../../diskdrake/interactive.pm_.c:262 msgid "Hard drive information" msgstr "" #: ../../diskdrake/interactive.pm_.c:283 msgid "All primary partitions are used" msgstr "" #: ../../diskdrake/interactive.pm_.c:284 msgid "I can't add any more partition" msgstr "" #: ../../diskdrake/interactive.pm_.c:285 msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" #: ../../diskdrake/interactive.pm_.c:295 msgid "Save partition table" msgstr "" #: ../../diskdrake/interactive.pm_.c:296 msgid "Restore partition table" msgstr "" #: ../../diskdrake/interactive.pm_.c:297 msgid "Rescue partition table" msgstr "" #: ../../diskdrake/interactive.pm_.c:299 msgid "Reload partition table" msgstr "" #: ../../diskdrake/interactive.pm_.c:304 msgid "Removable media automounting" msgstr "" #: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333 msgid "Select file" msgstr "" #: ../../diskdrake/interactive.pm_.c:320 msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" #: ../../diskdrake/interactive.pm_.c:334 msgid "Warning" msgstr "" #: ../../diskdrake/interactive.pm_.c:335 msgid "" "Insert a floppy in drive\n" "All data on this floppy will be lost" msgstr "" #: ../../diskdrake/interactive.pm_.c:346 msgid "Trying to rescue partition table" msgstr "" #: ../../diskdrake/interactive.pm_.c:352 msgid "Detailed information" msgstr "" #: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534 #: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24 #: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83 msgid "Mount point" msgstr "" #: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25 #: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84 msgid "Options" msgstr "" #: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621 msgid "Resize" msgstr "" #: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:672 msgid "Move" msgstr "" #: ../../diskdrake/interactive.pm_.c:369 msgid "Format" msgstr "" #: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80 msgid "Mount" msgstr "" #: ../../diskdrake/interactive.pm_.c:371 msgid "Add to RAID" msgstr "" #: ../../diskdrake/interactive.pm_.c:372 msgid "Add to LVM" msgstr "" #: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79 msgid "Unmount" msgstr "" #: ../../diskdrake/interactive.pm_.c:375 msgid "Remove from RAID" msgstr "" #: ../../diskdrake/interactive.pm_.c:376 msgid "Remove from LVM" msgstr "" #: ../../diskdrake/interactive.pm_.c:377 msgid "Modify RAID" msgstr "" #: ../../diskdrake/interactive.pm_.c:378 msgid "Use for loopback" msgstr "" #: ../../diskdrake/interactive.pm_.c:417 msgid "Create a new partition" msgstr "" #: ../../diskdrake/interactive.pm_.c:420 msgid "Start sector: " msgstr "" #: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:771 msgid "Size in MB: " msgstr "" #: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:772 msgid "Filesystem type: " msgstr "" #: ../../diskdrake/interactive.pm_.c:424 #: ../../diskdrake/interactive.pm_.c:1031 #: ../../diskdrake/interactive.pm_.c:1105 msgid "Mount point: " msgstr "" #: ../../diskdrake/interactive.pm_.c:428 msgid "Preference: " msgstr "" #: ../../diskdrake/interactive.pm_.c:472 msgid "Remove the loopback file?" msgstr "" #: ../../diskdrake/interactive.pm_.c:497 msgid "Change partition type" msgstr "" #: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48 msgid "Which filesystem do you want?" msgstr "" #: ../../diskdrake/interactive.pm_.c:502 msgid "Switching from ext2 to ext3" msgstr "" #: ../../diskdrake/interactive.pm_.c:532 #, c-format msgid "Where do you want to mount loopback file %s?" msgstr "" #: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553 #, c-format msgid "Where do you want to mount device %s?" msgstr "" #: ../../diskdrake/interactive.pm_.c:539 msgid "" "Can't unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" #: ../../diskdrake/interactive.pm_.c:577 msgid "Computing FAT filesystem bounds" msgstr "" #: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636 #: ../../install_interactive.pm_.c:130 msgid "Resizing" msgstr "" #: ../../diskdrake/interactive.pm_.c:609 msgid "This partition is not resizeable" msgstr "" #: ../../diskdrake/interactive.pm_.c:614 msgid "All data on this partition should be backed-up" msgstr "" #: ../../diskdrake/interactive.pm_.c:616 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "" #: ../../diskdrake/interactive.pm_.c:621 msgid "Choose the new size" msgstr "" #: ../../diskdrake/interactive.pm_.c:622 msgid "New size in MB: " msgstr "" #: ../../diskdrake/interactive.pm_.c:673 msgid "Which disk do you want to move it to?" msgstr "" #: ../../diskdrake/interactive.pm_.c:674 msgid "Sector" msgstr "" #: ../../diskdrake/interactive.pm_.c:675 msgid "Which sector do you want to move it to?" msgstr "" #: ../../diskdrake/interactive.pm_.c:678 msgid "Moving" msgstr "" #: ../../diskdrake/interactive.pm_.c:678 msgid "Moving partition..." msgstr "" #: ../../diskdrake/interactive.pm_.c:695 msgid "Choose an existing RAID to add to" msgstr "" #: ../../diskdrake/interactive.pm_.c:696 ../../diskdrake/interactive.pm_.c:714 msgid "new" msgstr "" #: ../../diskdrake/interactive.pm_.c:712 msgid "Choose an existing LVM to add to" msgstr "" #: ../../diskdrake/interactive.pm_.c:717 msgid "LVM name?" msgstr "" #: ../../diskdrake/interactive.pm_.c:757 msgid "This partition can't be used for loopback" msgstr "" #: ../../diskdrake/interactive.pm_.c:769 msgid "Loopback" msgstr "" #: ../../diskdrake/interactive.pm_.c:770 msgid "Loopback file name: " msgstr "" #: ../../diskdrake/interactive.pm_.c:775 msgid "Give a file name" msgstr "" #: ../../diskdrake/interactive.pm_.c:778 msgid "File already used by another loopback, choose another one" msgstr "" #: ../../diskdrake/interactive.pm_.c:779 msgid "File already exists. Use it?" msgstr "" #: ../../diskdrake/interactive.pm_.c:802 msgid "Mount options" msgstr "" #: ../../diskdrake/interactive.pm_.c:809 msgid "Various" msgstr "" #: ../../diskdrake/interactive.pm_.c:871 msgid "device" msgstr "" #: ../../diskdrake/interactive.pm_.c:872 msgid "level" msgstr "" #: ../../diskdrake/interactive.pm_.c:873 msgid "chunk size" msgstr "" #: ../../diskdrake/interactive.pm_.c:888 msgid "Be careful: this operation is dangerous." msgstr "" #: ../../diskdrake/interactive.pm_.c:903 msgid "What type of partitioning?" msgstr "" #: ../../diskdrake/interactive.pm_.c:921 msgid "" "Sorry I won't accept to create /boot so far onto the drive (on a cylinder > " "1024).\n" "Either you use LILO and it won't work, or you don't use LILO and you don't " "need /boot" msgstr "" #: ../../diskdrake/interactive.pm_.c:925 msgid "" "The partition you've selected to add as root (/) is physically located " "beyond\n" "the 1024th cylinder of the hard drive, and you have no /boot partition.\n" "If you plan to use the LILO boot manager, be careful to add a /boot partition" msgstr "" #: ../../diskdrake/interactive.pm_.c:931 msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "So be careful to add a /boot partition" msgstr "" #: ../../diskdrake/interactive.pm_.c:951 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "" #: ../../diskdrake/interactive.pm_.c:955 msgid "You'll need to reboot before the modification can take place" msgstr "" #: ../../diskdrake/interactive.pm_.c:966 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "" #: ../../diskdrake/interactive.pm_.c:968 msgid "Formatting" msgstr "" #: ../../diskdrake/interactive.pm_.c:969 #, c-format msgid "Formatting loopback file %s" msgstr "" #: ../../diskdrake/interactive.pm_.c:970 #: ../../install_steps_interactive.pm_.c:459 #, c-format msgid "Formatting partition %s" msgstr "" #: ../../diskdrake/interactive.pm_.c:981 msgid "Hide files" msgstr "" #: ../../diskdrake/interactive.pm_.c:981 msgid "Move files to the new partition" msgstr "" #: ../../diskdrake/interactive.pm_.c:982 #, c-format msgid "" "Directory %s already contain some data\n" "(%s)" msgstr "" #: ../../diskdrake/interactive.pm_.c:993 msgid "Moving files to the new partition" msgstr "" #: ../../diskdrake/interactive.pm_.c:997 #, c-format msgid "Copying %s" msgstr "" #: ../../diskdrake/interactive.pm_.c:1001 #, c-format msgid "Removing %s" msgstr "" #: ../../diskdrake/interactive.pm_.c:1011 #, c-format msgid "partition %s is now known as %s" msgstr "" #: ../../diskdrake/interactive.pm_.c:1032 #: ../../diskdrake/interactive.pm_.c:1091 msgid "Device: " msgstr "" #: ../../diskdrake/interactive.pm_.c:1033 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "" #: ../../diskdrake/interactive.pm_.c:1037 #: ../../diskdrake/interactive.pm_.c:1045 #: ../../diskdrake/interactive.pm_.c:1109 msgid "Type: " msgstr "" #: ../../diskdrake/interactive.pm_.c:1041 msgid "Name: " msgstr "" #: ../../diskdrake/interactive.pm_.c:1049 #, c-format msgid "Start: sector %s\n" msgstr "" #: ../../diskdrake/interactive.pm_.c:1050 #, c-format msgid "Size: %s" msgstr "" #: ../../diskdrake/interactive.pm_.c:1052 #, c-format msgid ", %s sectors" msgstr "" #: ../../diskdrake/interactive.pm_.c:1054 #, c-format msgid "Cylinder %d to cylinder %d\n" msgstr "" #: ../../diskdrake/interactive.pm_.c:1055 msgid "Formatted\n" msgstr "" #: ../../diskdrake/interactive.pm_.c:1056 msgid "Not formatted\n" msgstr "" #: ../../diskdrake/interactive.pm_.c:1057 msgid "Mounted\n" msgstr "" #: ../../diskdrake/interactive.pm_.c:1058 #, c-format msgid "RAID md%s\n" msgstr "" #: ../../diskdrake/interactive.pm_.c:1060 #, c-format msgid "" "Loopback file(s):\n" " %s\n" msgstr "" #: ../../diskdrake/interactive.pm_.c:1061 msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" #: ../../diskdrake/interactive.pm_.c:1063 #, c-format msgid "Level %s\n" msgstr "" #: ../../diskdrake/interactive.pm_.c:1064 #, c-format msgid "Chunk size %s\n" msgstr "" #: ../../diskdrake/interactive.pm_.c:1065 #, c-format msgid "RAID-disks %s\n" msgstr "" #: ../../diskdrake/interactive.pm_.c:1067 #, c-format msgid "Loopback file name: %s" msgstr "" #: ../../diskdrake/interactive.pm_.c:1070 msgid "" "\n" "Chances are, this partition is\n" "a Driver partition, you should\n" "probably leave it alone.\n" msgstr "" #: ../../diskdrake/interactive.pm_.c:1073 msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" msgstr "" #: ../../diskdrake/interactive.pm_.c:1092 #, c-format msgid "Size: %s\n" msgstr "" #: ../../diskdrake/interactive.pm_.c:1093 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "" #: ../../diskdrake/interactive.pm_.c:1094 msgid "Info: " msgstr "" #: ../../diskdrake/interactive.pm_.c:1095 #, c-format msgid "LVM-disks %s\n" msgstr "" #: ../../diskdrake/interactive.pm_.c:1096 #, c-format msgid "Partition table type: %s\n" msgstr "" #: ../../diskdrake/interactive.pm_.c:1097 #, c-format msgid "on bus %d id %d\n" msgstr "" #: ../../diskdrake/interactive.pm_.c:1111 #, c-format msgid "Options: %s" msgstr "" #: ../../diskdrake/interactive.pm_.c:1127 msgid "Filesystem encryption key" msgstr "" #: ../../diskdrake/interactive.pm_.c:1128 msgid "Choose your filesystem encryption key" msgstr "" #: ../../diskdrake/interactive.pm_.c:1131 #, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "" #: ../../diskdrake/interactive.pm_.c:1132 msgid "The encryption keys do not match" msgstr "" #: ../../diskdrake/interactive.pm_.c:1135 msgid "Encryption key" msgstr "" #: ../../diskdrake/interactive.pm_.c:1136 msgid "Encryption key (again)" msgstr "" #: ../../diskdrake/removable.pm_.c:47 msgid "Change type" msgstr "" #: ../../diskdrake/removable_gtk.pm_.c:28 msgid "Please click on a media" msgstr "" #: ../../diskdrake/smbnfs_gtk.pm_.c:165 msgid "Search servers" msgstr "" #: ../../fs.pm_.c:476 ../../fs.pm_.c:486 ../../fs.pm_.c:490 ../../fs.pm_.c:494 #: ../../fs.pm_.c:498 ../../fs.pm_.c:502 #, c-format msgid "%s formatting of %s failed" msgstr "" #: ../../fs.pm_.c:539 #, c-format msgid "I don't know how to format %s in type %s" msgstr "" #: ../../fs.pm_.c:611 msgid "mount failed" msgstr "" #: ../../fs.pm_.c:631 #, c-format msgid "fsck failed with exit code %d or signal %d" msgstr "" #: ../../fs.pm_.c:640 ../../fs.pm_.c:646 ../../partition_table.pm_.c:600 msgid "mount failed: " msgstr "" #: ../../fs.pm_.c:661 ../../partition_table.pm_.c:596 #, c-format msgid "error unmounting %s: %s" msgstr "" #: ../../fsedit.pm_.c:21 msgid "simple" msgstr "" #: ../../fsedit.pm_.c:25 msgid "with /usr" msgstr "" #: ../../fsedit.pm_.c:30 msgid "server" msgstr "" #: ../../fsedit.pm_.c:467 msgid "You can't use JFS for partitions smaller than 16MB" msgstr "" #: ../../fsedit.pm_.c:468 msgid "You can't use ReiserFS for partitions smaller than 32MB" msgstr "" #: ../../fsedit.pm_.c:477 msgid "Mount points must begin with a leading /" msgstr "" #: ../../fsedit.pm_.c:478 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "" #: ../../fsedit.pm_.c:482 #, c-format msgid "You can't use a LVM Logical Volume for mount point %s" msgstr "" #: ../../fsedit.pm_.c:484 msgid "This directory should remain within the root filesystem" msgstr "" #: ../../fsedit.pm_.c:486 msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n" msgstr "" #: ../../fsedit.pm_.c:488 #, c-format msgid "You can't use an encrypted file system for mount point %s" msgstr "" #: ../../fsedit.pm_.c:546 msgid "Not enough free space for auto-allocating" msgstr "" #: ../../fsedit.pm_.c:548 msgid "Nothing to do" msgstr "" #: ../../fsedit.pm_.c:612 #, c-format msgid "Error opening %s for writing: %s" msgstr "" #: ../../fsedit.pm_.c:697 msgid "" "An error has occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" #: ../../fsedit.pm_.c:720 msgid "You don't have any partitions!" msgstr "" #: ../../help.pm_.c:13 msgid "" "GNU/Linux is a multiuser system, and this means that each user can have his\n" "own preferences, his own files and so on. You can read the ``User Guide''\n" "to learn more. But unlike \"root\", which is the administrator, the users\n" "you will add here will not be entitled to change anything except their own\n" "files and their own configuration. You will have to create at least one\n" "regular user for yourself. That account is where you should log in for\n" "routine use. Although it is very practical to log in as \"root\" everyday,\n" "it may also be very dangerous! The slightest mistake could mean that your\n" "system would not work any more. If you make a serious mistake as a regular\n" "user, you may only lose some information, but not the entire system.\n" "\n" "First, you have to enter your real name. This is not mandatory, of course -\n" "as you can actually enter whatever you want. DrakX will then take the first\n" "word you have entered in the box and will bring it over to the \"User\n" "name\". This is the name this particular user will use to log into the\n" "system. You can change it. You then have to enter a password here. A\n" "non-privileged (regular) user's password is not as crucial as that of\n" "\"root\" from a security point of view, but that is no reason to neglect it\n" "- after all, your files are at risk.\n" "\n" "If you click on \"Accept user\", you can then add as many as you want. Add\n" "a user for each one of your friends: your father or your sister, for\n" "example. When you finish adding all the users you want, select \"Done\".\n" "\n" "Clicking the \"Advanced\" button allows you to change the default \"shell\"\n" "for that user (bash by default)." msgstr "" #: ../../help.pm_.c:41 msgid "" "Listed above are the existing Linux partitions detected on your hard drive.\n" "You can keep the choices made by the wizard, they are good for most common\n" "installs. If you make any changes, you must at least define a root\n" "partition (\"/\"). Do not choose too small a partition or you will not be\n" "able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a partition for \"/home\"\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\",\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\",\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\",\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." msgstr "" #: ../../help.pm_.c:72 msgid "" "The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n" "knows if a selected package is located on another CD-ROM and will eject the\n" "current CD and ask you to insert a different one as required." msgstr "" #: ../../help.pm_.c:77 msgid "" "It is now time to specify which programs you wish to install on your\n" "system. There are thousands of packages available for Mandrake Linux, and\n" "you are not supposed to know them all by heart.\n" "\n" "If you are performing a standard installation from CD-ROM, you will first\n" "be asked to specify the CDs you currently have (in Expert mode only). Check\n" "the CD labels and highlight the boxes corresponding to the CDs you have\n" "available for installation. Click \"OK\" when you are ready to continue.\n" "\n" "Packages are sorted in groups corresponding to a particular use of your\n" "machine. The groups themselves are sorted into four sections:\n" "\n" " * \"Workstation\": if you plan to use your machine as a workstation, " "select\n" "one or more of the corresponding groups.\n" "\n" " * \"Development\": if the machine is to be used for programming, choose " "the\n" "desired group(s).\n" "\n" " * \"Server\": if the machine is intended to be a server, you will be able\n" "to select which of the most common services you wish to see installed on\n" "the machine.\n" "\n" " * \"Graphical Environment\": finally, this is where you will choose your\n" "preferred graphical environment. At least one must be selected if you want\n" "to have a graphical workstation!\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group. If you deselect all groups when performing a regular\n" "installation (by opposition to an upgrade), a dialog will popup proposing\n" "different options for a minimal installation:\n" "\n" " * \"With X\" Install the fewer packages possible for having a working\n" "graphical desktop;\n" "\n" " * \"With basic documentation\" Installs the base system plus basic\n" "utilities and their documentation. This installation is suitable for\n" "setting up a server.\n" "\n" " * \"Truly minimal install\" Will install the strict minimum necessary to\n" "get a working Linux system, in command line only. This installation is\n" "about 65Mb large.\n" "\n" "You can check the \"Individual package selection\" box, which is useful if\n" "you are familiar with the packages being offered or if you want to have\n" "total control over what will be installed.\n" "\n" "If you started the installation in \"Upgrade\" mode, you can unselect all\n" "groups to avoid installing any new package. This is useful for repairing or\n" "updating an existing system." msgstr "" #: ../../help.pm_.c:128 msgid "" "Finally, depending on your choice of whether or not to select individual\n" "packages, you will be presented a tree containing all packages classified\n" "by groups and subgroups. While browsing the tree, you can select entire\n" "groups, subgroups, or individual packages.\n" "\n" "Whenever you select a package on the tree, a description appears on the\n" "right. When your selection is finished, click the \"Install\" button which\n" "will then launch the installation process. Depending on the speed of your\n" "hardware and the number of packages that need to be installed, it may take\n" "a while to complete the process. A time to complete estimate is displayed\n" "on the screen to help you gauge if there is sufficient time to enjoy a cup\n" "of coffee.\n" "\n" "!! If a server package has been selected either intentionally or because it\n" "was part of a whole group, you will be asked to confirm that you really\n" "want those servers to be installed. Under Mandrake Linux, any installed\n" "servers are started by default at boot time. Even if they are safe and have\n" "no known issues at the time the distribution was shipped, it may happen\n" "that security holes are discovered after this version of Mandrake Linux was\n" "finalized. If you do not know what a particular service is supposed to do\n" "or why it is being installed, then click \"No\". Clicking \"Yes\" will\n" "install the listed services and they will be started automatically by\n" "default. !!\n" "\n" "The \"Automatic dependencies\" option simply disables the warning dialog\n" "which appears whenever the installer automatically selects a package. This\n" "occurs because it has determined that it needs to satisfy a dependency with\n" "another package in order to successfully complete the installation.\n" "\n" "The tiny floppy disc icon at the bottom of the list allows to load the\n" "packages list chosen during a previous installation. Clicking on this icon\n" "will ask you to insert a floppy disk previously created at the end of\n" "another installation. See the second tip of last step on how to create such\n" "a floppy." msgstr "" #: ../../help.pm_.c:164 msgid "" "You are now proposed to setup your internet/network connection. If you wish\n" "to connect your computer to the Internet or to a local network, click\n" "\"OK\". The autodetection of network devices and modem will be launched. If\n" "this detection fails, uncheck the \"Use auto detection\" box next time. You\n" "may also choose not to configure the network, or do it later; in that case\n" "simply click the \"Cancel\" button.\n" "\n" "Available connections are: traditional modem, ISDN modem, ADSL connection,\n" "cable modem, and finally a simple LAN connection (Ethernet).\n" "\n" "Here, we will not detail each configuration. Simply make sure that you have\n" "all the parameters from your Internet Service Provider or system\n" "administrator.\n" "\n" "You can consult the manual chapter about internet connections for details\n" "about the configuration, or simply wait until your system is installed and\n" "use the program described there to configure your connection.\n" "\n" "If you wish to configure the network later after installation or if you\n" "have finished configuring your network connection, click \"Cancel\"." msgstr "" #: ../../help.pm_.c:186 msgid "" "You may now choose which services you wish to start at boot time.\n" "\n" "Here are presented all the services available with the current\n" "installation. Review them carefully and uncheck those which are not always\n" "needed at boot time.\n" "\n" "You can get a short explanatory text about a service by selecting a\n" "specific service. However, if you are not sure whether a service is useful\n" "or not, it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you will probably not want to start any services that you do not\n" "need. Please remember that several services can be dangerous if they are\n" "enabled on a server. In general, select only the services you really need.\n" "!!" msgstr "" #: ../../help.pm_.c:203 msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n" "local time according to the time zone you selected. It is however possible\n" "to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n" "hardware clock is the same as the system clock. This is useful when the\n" "machine is hosting another operating system like Windows.\n" "\n" "The \"Automatic time synchronization\" option will automatically regulate\n" "the clock by connecting to a remote time server on the internet. In the\n" "list that is presented, choose a server located near you. Of course you\n" "must have a working internet connection for this feature to function. It\n" "will actually install on your machine a time server that can be optionally\n" "used by other machines on your local network." msgstr "" #: ../../help.pm_.c:217 msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" "on which all the graphics environments (KDE, GNOME, AfterStep,\n" "WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n" "will try to configure X automatically.\n" "\n" "It is extremely rare for it to fail, unless the hardware is very old (or\n" "very new). If it succeeds, it will start X automatically with the best\n" "resolution possible depending on the size of the monitor. A window will\n" "then appear and ask you if you can see it.\n" "\n" "If you are doing an \"Expert\" install, you will enter the X configuration\n" "wizard. See the corresponding section of the manual for more information\n" "about this wizard.\n" "\n" "If you can see the message during the test, and answer \"Yes\", then DrakX\n" "will proceed to the next step. If you cannot see the message, it simply\n" "means that the configuration was wrong and the test will automatically end\n" "after 10 seconds, restoring the screen." msgstr "" #: ../../help.pm_.c:237 msgid "" "The first time you try the X configuration, you may not be very satisfied\n" "with its display (screen is too small, shifted left or right...). Hence,\n" "even if X starts up correctly, DrakX then asks you if the configuration\n" "suits you. It will also propose to change it by displaying a list of valid\n" "modes it could find, asking you to select one.\n" "\n" "As a last resort, if you still cannot get X to work, choose \"Change\n" "graphics card\", select \"Unlisted card\", and when prompted on which\n" "server you want, choose \"FBDev\". This is a failsafe option which works\n" "with any modern graphics card. Then choose \"Test again\" to be sure." msgstr "" #: ../../help.pm_.c:249 msgid "" "Finally, you will be asked whether you want to see the graphical interface\n" "at boot. Note this question will be asked even if you chose not to test the\n" "configuration. Obviously, you want to answer \"No\" if your machine is to\n" "act as a server, or if you were not successful in getting the display\n" "configured." msgstr "" #: ../../help.pm_.c:256 msgid "" "The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it by\n" "booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n" "at the prompt. But in case your computer cannot boot from the CD-ROM, you\n" "should come back to this step for help in at least two situations:\n" "\n" " * when installing the boot loader, DrakX will rewrite the boot sector " "(MBR)\n" "of your main disk (unless you are using another boot manager) so that you\n" "can start up with either Windows or GNU/Linux (assuming you have Windows in\n" "your system). If you need to reinstall Windows, the Microsoft install\n" "process will rewrite the boot sector, and then you will not be able to\n" "start GNU/Linux!\n" "\n" " * if a problem arises and you cannot start up GNU/Linux from the hard " "disk,\n" "this floppy disk will be the only means of starting up GNU/Linux. It\n" "contains a fair number of system tools for restoring a system, which has\n" "crashed due to a power failure, an unfortunate typing error, a typo in a\n" "password, or any other reason.\n" "\n" "When you click on this step, you will be asked to enter a disk inside the\n" "drive. The floppy disk you will insert must be empty or contain data which\n" "you do not need. You will not have to format it since DrakX will rewrite\n" "the whole disk." msgstr "" #: ../../help.pm_.c:280 msgid "" "At this point you need to choose where on your hard drive to install your\n" "Mandrake Linux operating system. If your hard drive is empty or if an\n" "existing operating system is using all the space available, you will need\n" "to partition it. Basically, partitioning a hard drive consists of logically\n" "dividing it to create space to install your new Mandrake Linux system.\n" "\n" "Because the effects of the partitioning process are usually irreversible,\n" "partitioning can be intimidating and stressful if you are an inexperienced\n" "user. Fortunately, there is a wizard which simplifies this process. Before\n" "beginning, please consult the manual and take your time.\n" "\n" "If you are running the install in Expert mode, you will enter DiskDrake,\n" "the Mandrake Linux partitioning tool, which allows you to fine-tune your\n" "partitions. See the DiskDrake chapter of the manual. From the installation\n" "interface, you can use the wizards as described here by clicking the\n" "\"Wizard\" button of the dialog.\n" "\n" "If partitions have already been defined, either from a previous\n" "installation or from another partitioning tool, simply select those to\n" "install your Linux system.\n" "\n" "If partitions are not defined, you will need to create them using the\n" "wizard. Depending on your hard drive configuration, several options are\n" "available:\n" "\n" " * \"Use free space\": this option will simply lead to an automatic\n" "partitioning of your blank drive(s). You will not be prompted further.\n" "\n" " * \"Use existing partition\": the wizard has detected one or more existing\n" "Linux partitions on your hard drive. If you want to use them, choose this\n" "option.\n" "\n" " * \"Use the free space on the Windows partition\": if Microsoft Windows is\n" "installed on your hard drive and takes all the space available on it, you\n" "have to create free space for Linux data. To do that, you can delete your\n" "Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n" "mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n" "be performed without the loss of any data. This solution is recommended if\n" "you want to use both Mandrake Linux and Microsoft Windows on same computer.\n" "\n" " Before choosing this option, please understand that after this " "procedure,\n" "the size of your Microsoft Windows partition will be smaller than at the\n" "present time. You will have less free space under Microsoft Windows to\n" "store your data or to install new software.\n" "\n" " * \"Erase entire disk\": if you want to delete all data and all partitions\n" "present on your hard drive and replace them with your new Mandrake Linux\n" "system, choose this option. Be careful with this solution because you will\n" "not be able to revert your choice after confirmation.\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"Remove Windows\": this will simply erase everything on the drive and\n" "begin fresh, partitioning everything from scratch. All data on your disk\n" "will be lost.\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"Expert mode\": choose this option if you want to manually partition\n" "your hard drive. Be careful - it is a powerful but dangerous choice. You\n" "can very easily lose all your data. Hence, do not choose this unless you\n" "know what you are doing." msgstr "" #: ../../help.pm_.c:344 msgid "" "There you are. Installation is now complete and your GNU/Linux system is\n" "ready to use. Just click \"OK\" to reboot the system. You can start\n" "GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n" "soon as the computer has booted up again.\n" "\n" "The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n" "\n" " * \"generate auto-install floppy\": to create an installation floppy disk\n" "which will automatically perform a whole installation without the help of\n" "an operator, similar to the installation you just configured.\n" "\n" " Note that two different options are available after clicking the button:\n" "\n" " * \"Replay\". This is a partially automated install as the partitioning\n" "step (and only this one) remains interactive.\n" "\n" " * \"Automated\". Fully automated install: the hard disk is completely\n" "rewritten, all data is lost.\n" "\n" " This feature is very handy when installing a great number of similar\n" "machines. See the Auto install section at our web site.\n" "\n" " * \"Save packages selection\"(*): saves the packages selection as made\n" "previously. Then, when doing another installation, insert the floppy inside\n" "the driver and run the installation going to the help screen by pressing on\n" "the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n" "\n" "(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n" "\"mformat a:\")" msgstr "" #: ../../help.pm_.c:375 msgid "" "Any partitions that have been newly defined must be formatted for use\n" "(formatting means creating a file system).\n" "\n" "At this time, you may wish to reformat some already existing partitions to\n" "erase any data they contain. If you wish to do that, please select those\n" "partitions as well.\n" "\n" "Please note that it is not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n" "reformat partitions containing data that you wish to keep (typically\n" "\"/home\").\n" "\n" "Please be careful when selecting partitions. After formatting, all data on\n" "the selected partitions will be deleted and you will not be able to recover\n" "any of them.\n" "\n" "Click on \"OK\" when you are ready to format partitions.\n" "\n" "Click on \"Cancel\" if you want to choose another partition for your new\n" "Mandrake Linux operating system installation.\n" "\n" "Click on \"Advanced\" if you wish to select partitions that will be checked\n" "for bad blocks on the disc." msgstr "" #: ../../help.pm_.c:401 msgid "" "Your new Mandrake Linux operating system is currently being installed.\n" "Depending on the number of packages you will be installing and the speed of\n" "your computer, this operation could take from a few minutes to a\n" "significant amount of time.\n" "\n" "Please be patient." msgstr "" #: ../../help.pm_.c:409 msgid "" "At the time you are installing Mandrake Linux, it is likely that some\n" "packages have been updated since the initial release. Some bug-fixes may\n" "have been fixed, and security issues solved. To allow you to benefit from\n" "this updates you are now proposed to download them from the internet.\n" "Choose \"Yes\" if you have a working internet connection, or \"No\" if you\n" "prefer to install updated packages later.\n" "\n" "Choosing \"Yes\" displays a list of places from which updates can be\n" "retrieved. Choose the one nearer to you. Then a packages selection tree\n" "appears: review the selection, and press \"Install\" to retrieve and\n" "install the selected package or \"Cancel\" to abort." msgstr "" #: ../../help.pm_.c:422 msgid "" "Before continuing you should read carefully the terms of the license. It\n" "covers the whole Mandrake Linux distribution, and if you do not agree with\n" "all the terms in it, click on the \"Refuse\" button which will immediately\n" "terminate the installation. To continue with the installation, click the\n" "\"Accept\" button." msgstr "" #: ../../help.pm_.c:429 msgid "" "At this point, it is time to choose the security level desired for the\n" "machine. As a rule of thumb, the more exposed the machine is, and the more\n" "the data stored in it is crucial, the higher the security level should be.\n" "However, a higher security level is generally obtained at the expenses of\n" "easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n" "get more information about the meaning of these levels.\n" "\n" "If you do not know what to choose, keep the default option." msgstr "" #: ../../help.pm_.c:439 msgid "" "At this point, you need to choose what partition(s) will be used for the\n" "installation of your Mandrake Linux system. If partitions have been already\n" "defined, either from a previous installation of GNU/Linux or from another\n" "partitioning tool, you can use existing partitions. Otherwise hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n" "\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"Clear all\": this option deletes all partitions on the selected hard\n" "drive.\n" "\n" " * \"Auto allocate\": this option allows you to automatically create Ext2\n" "and swap partitions in free space of your hard drive.\n" "\n" " * \"More\": gives access to additional features:\n" "\n" " * \"Save partition table\": saves the partition table to a floppy. " "Useful\n" "for later partition-table recovery if necessary. It is strongly recommended\n" "to perform this step.\n" "\n" " * \"Restore partition table\": allows to restore a previously saved\n" "partition table from floppy disk.\n" "\n" " * \"Rescue partition table\": if your partition table is damaged, you " "can\n" "try to recover it using this option. Please be careful and remember that it\n" "can fail.\n" "\n" " * \"Reload partition table\": discards all changes and load your " "initial\n" "partitions table.\n" "\n" " * \"removable media automounting\": unchecking this option will force " "users\n" "to manually mount and unmount removable medias such as floppies and\n" "CD-ROMs.\n" "\n" " * \"Wizard\": use this option if you wish to use a wizard to partition " "your\n" "hard drive. This is recommended if you do not have a good knowledge of\n" "partitioning.\n" "\n" " * \"Undo\": use this option to cancel your changes.\n" "\n" " * \"Toggle to normal/expert mode\": allows additional actions on " "partitions\n" "(Type, options, format) and gives more information.\n" "\n" " * \"Done\": when you have finished partitioning your hard drive, this will\n" "save your changes back to disc.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected);\n" "\n" " * Ctrl-d to delete a partition;\n" "\n" " * Ctrl-m to set the mount point.\n" "\n" "To get information about the different filesystem types available, please\n" "read the chapter ext2fs from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n" "boot loader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." msgstr "" #: ../../help.pm_.c:510 msgid "" "More than one Microsoft Windows partition has been detected on your hard\n" "drive. Please choose the one you want to resize in order to install your\n" "new Mandrake Linux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\",\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\",\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\",\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." msgstr "" #: ../../help.pm_.c:541 msgid "Please be patient. This operation can take several minutes." msgstr "" #: ../../help.pm_.c:544 msgid "" "DrakX now needs to know if you want to perform a default (\"Recommended\")\n" "installation or if you want to have greater control (\"Expert\"). You also\n" "have the choice of performing a new install or an upgrade of an existing\n" "Mandrake Linux system:\n" "\n" " * \"Install\" Completely wipes out the old system. In fact, depending on\n" "what currently holds your machine, you will be able to keep some old (Linux\n" "or other) partitions unchanged.\n" "\n" " * \"Upgrade\" This installation class allows to simply update the packages\n" "currently installed on your Mandrake Linux system. It keeps the current\n" "partitions of your hard drives as well as users configuration. All other\n" "configuration steps remain available with respect to plain installation.\n" "\n" " * \"Upgrade Packages Only\" This brand new class allows to upgrade an\n" "existing Mandrake Linux system while keeping all system configuration\n" "unchanged. Adding new packages to the current installation will be also\n" "possible.\n" "\n" "Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n" "release.\n" "\n" "Depending on your knowledge of GNU/Linux, select one of the following\n" "choices:\n" "\n" " * Recommended: choose this if you have never installed a GNU/Linux\n" "operating system. The installation will be very easy and you will only be\n" "asked a few questions.\n" "\n" " * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n" "installation class. The expert installation will allow you to perform a\n" "highly customized installation. Answering some of the questions can be\n" "difficult if you do not have a good knowledge of GNU/Linux so do not choose\n" "this unless you know what you are doing." msgstr "" #: ../../help.pm_.c:580 msgid "" "Normally, DrakX selects the right keyboard for you (depending on the\n" "language you have chosen) and you will not even see this step. However, you\n" "might not have a keyboard that corresponds exactly to your language: for\n" "example, if you are an English speaking Swiss person, you may still want\n" "your keyboard to be a Swiss keyboard. Or if you speak English but are\n" "located in Quebec, you may find yourself in the same situation. In both\n" "cases, you will have to go back to this installation step and select an\n" "appropriate keyboard from the list.\n" "\n" "Click on the \"More\" button to be presented with the complete list of\n" "supported keyboards." msgstr "" #: ../../help.pm_.c:593 msgid "" "Please choose your preferred language for installation and system usage.\n" "\n" "Clicking on the \"Advanced\" button will allow you to select other\n" "languages to be installed on your workstation. Selecting other languages\n" "will install the language-specific files for system documentation and\n" "applications. For example, if you will host users from Spain on your\n" "machine, select English as the main language in the tree view and in the\n" "Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n" "\n" "Note that multiple languages may be installed. Once you have selected any\n" "additional locales click the \"OK\" button to continue." msgstr "" #: ../../help.pm_.c:606 msgid "" "By default, DrakX assumes you have a two-button mouse and will set it up\n" "for third-button emulation. DrakX will automatically know whether it is a\n" "PS/2, serial or USB mouse.\n" "\n" "If you wish to specify a different type of mouse select the appropriate\n" "type from the list provided.\n" "\n" "If you choose a mouse other than the default you will be presented with a\n" "mouse test screen. Use the buttons and wheel to verify that the settings\n" "are good. If the mouse is not working correctly press the space bar or\n" "[Return] to \"Cancel\" and choose again." msgstr "" #: ../../help.pm_.c:619 msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." msgstr "" #: ../../help.pm_.c:623 msgid "" "This is the most crucial decision point for the security of your GNU/Linux\n" "system: you have to enter the \"root\" password. \"root\" is the system\n" "administrator and is the only one authorized to make updates, add users,\n" "change the overall system configuration, and so on. In short, \"root\" can\n" "do everything! That is why you must choose a password that is difficult to\n" "guess - DrakX will tell you if it is too easy. As you can see, you can\n" "choose not to enter a password, but we strongly advise you against this if\n" "only for one reason: do not think that because you booted GNU/Linux that\n" "your other operating systems are safe from mistakes. Since \"root\" can\n" "overcome all limitations and unintentionally erase all data on partitions\n" "by carelessly accessing the partitions themselves, it is important for it\n" "to be difficult to become \"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password - it makes it too\n" "easy to compromise a system.\n" "\n" "However, please do not make the password too long or complicated because\n" "you must be able to remember it without too much effort.\n" "\n" "The password will not be displayed on screen as you type it in. Hence, you\n" "will have to type the password twice to reduce the chance of a typing\n" "error. If you do happen to make the same typing error twice, this\n" "\"incorrect\" password will have to be used the first time you connect.\n" "\n" "In expert mode, you will be asked if you will be connecting to an\n" "authentication server, like NIS or LDAP.\n" "\n" "If your network uses LDAP (or NIS) protocol for authentication, select\n" "\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n" "network administrator.\n" "\n" "If your computer is not connected to any administrated network, you will\n" "want to choose \"Local files\" for authentication." msgstr "" #: ../../help.pm_.c:659 msgid "" "LILO and grub are boot loaders for GNU/Linux. This stage, normally, is\n" "totally automated. In fact, DrakX analyzes the disk boot sector and acts\n" "accordingly, depending on what it finds here:\n" "\n" " * if a Windows boot sector is found, it will replace it with a grub/LILO\n" "boot sector. Hence, you will be able to load either GNU/Linux or another\n" "OS;\n" "\n" " * if a grub or LILO boot sector is found, it will replace it with a new\n" "one;\n" "\n" "If in doubt, DrakX will display a dialog with various options.\n" "\n" " * \"Boot loader to use\": you have three choices:\n" "\n" " * \"GRUB\": if you prefer grub (text menu).\n" "\n" " * \"LILO with graphical menu\": if you prefer LILO with its graphical\n" "interface.\n" "\n" " * \"LILO with text menu\": if you prefer LILO with its text menu " "interface.\n" "\n" " * \"Boot device\": in most cases, you will not change the default\n" "(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n" "second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n" "\n" " * \"Delay before booting the default image\": when rebooting the computer,\n" "this is the delay granted to the user to choose - in the boot loader menu,\n" "another boot entry than the default one.\n" "\n" "!! Beware that if you choose not to install a boot loader (by selecting\n" "\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n" "Linux system! Also be sure you know what you do before changing any of the\n" "options. !!\n" "\n" "Clicking the \"Advanced\" button in this dialog will offer many advanced\n" "options, which are reserved to the expert user.\n" "\n" "After you have configured the general boot-loader parameters, you are\n" "presented the list of boot options that will be available at boot time.\n" "\n" "If there is another operating system installed on your machine, it will be\n" "automatically added to the boot menu. Here, you can choose to fine-tune the\n" "existing options. Select an entry and click \"Modify\" to modify or remove\n" "it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n" "installation step." msgstr "" #: ../../help.pm_.c:707 msgid "" "LILO (the LInux LOader) and grub are boot loaders: they are able to boot\n" "either GNU/Linux or any other operating system present on your computer.\n" "Normally, these other operating systems are correctly detected and\n" "installed. If this is not the case, you can add an entry by hand in this\n" "screen. Be careful to choose the correct parameters.\n" "\n" "You may also not want to give access to these other operating systems to\n" "anyone. In which case, you can delete the corresponding entries. But then,\n" "you will need a boot disk in order to boot those other operating systems!" msgstr "" #: ../../help.pm_.c:718 msgid "" "You must indicate where you wish to place the information required to boot\n" "to GNU/Linux.\n" "\n" "Unless you know exactly what you are doing, choose \"First sector of drive\n" "(MBR)\"." msgstr "" #: ../../help.pm_.c:725 msgid "" "Here we select a printing system for your computer to use. Other OSes may\n" "offer you one, but Mandrake offers three.\n" "\n" " * \"pdq\" - which means ``print, don't queue'', is the choice if you have " "a\n" "direct connection to your printer and you want to be able to panic out of\n" "printer jams, and you do not have any networked printers. It will handle\n" "only very simple network cases and is somewhat slow for networks. Pick\n" "\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n" "choices after install by running PrinterDrake from the Mandrake Control\n" "Center and clicking the expert button.\n" "\n" " * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n" "your local printer and also halfway round the planet. It is simple and can\n" "act like a server or a client for the ancient \"lpd\" printing system, so\n" "it is compatible with the systems that went before. It can do many tricks,\n" "but the basic setup is almost as easy as \"pdq\". If you need this to\n" "emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n" "graphical front-ends for printing or choosing printer options.\n" "\n" " * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n" "approximately the same things the others can do, but it will print to\n" "printers mounted on a Novell Network, because it supports IPX protocol, and\n" "it can print directly to shell commands. If you have need of Novell or\n" "printing to commands without using a separate pipe construct, use lprNG.\n" "Otherwise, CUPS is preferable as it is simpler and better at working over\n" "networks." msgstr "" #: ../../help.pm_.c:753 msgid "" "DrakX is now detecting any IDE devices present in your computer. It will\n" "also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n" "is found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection will sometimes not detect a piece of hardware,\n" "DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n" "if you know that there is a SCSI card installed in your machine. You will\n" "be presented a list of SCSI cards to choose from. Click \"No\" if you have\n" "no SCSI hardware. If you are unsure you can check the list of hardware\n" "detected in your machine by selecting \"See hardware info\" and clicking\n" "\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n" "return to the SCSI interface question.\n" "\n" "If you have to manually specify your adapter, DrakX will ask if you want to\n" "specify options for it. You should allow DrakX to probe the hardware for\n" "the card-specific options that the hardware needs to initialize. This\n" "usually works well.\n" "\n" "If DrakX is not able to probe for the options that need to be passed, you\n" "will need to manually provide options to the driver. Please review the\n" "``User Guide'' (chapter 3, section \"Collecting Information on Your\n" "Hardware\") for hints on retrieving the parameters required from hardware\n" "documentation, from the manufacturer's web site (if you have Internet\n" "access) or from Microsoft Windows (if you used this hardware with Windows\n" "on your system)." msgstr "" #: ../../help.pm_.c:780 msgid "" "You can add additional entries for yaboot, either for other operating\n" "systems, alternate kernels, or for an emergency boot image.\n" "\n" "For other OS's, the entry consists only of a label and the root partition.\n" "\n" "For Linux, there are a few possible options:\n" "\n" " * Label: this is simply the name you will have to type at the yaboot " "prompt\n" "to select this boot option.\n" "\n" " * Image: this would be the name of the kernel to boot. Typically, vmlinux\n" "or a variation of vmlinux with an extension.\n" "\n" " * Root: the \"root\" device or \"/\" for your Linux installation.\n" "\n" " * Append: on Apple hardware, the kernel append option is used quite often\n" "to assist in initializing video hardware, or to enable keyboard mouse\n" "button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n" "Apple mouse. The following are some examples:\n" "\n" " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 " "hda=autotune\n" "\n" " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" "\n" " * Initrd: this option can be used either to load initial modules, before\n" "the boot device is available, or to load a ramdisk image for an emergency\n" "boot situation.\n" "\n" " * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n" "need to allocate a large ramdisk, this option can be used.\n" "\n" " * Read-write: normally the \"root\" partition is initially brought up in\n" "read-only, to allow a file system check before the system becomes \"live\".\n" "Here, you can override this option.\n" "\n" " * NoVideo: should the Apple video hardware prove to be exceptionally\n" "problematic, you can select this option to boot in \"novideo\" mode, with\n" "native frame buffer support.\n" "\n" " * Default: selects this entry as being the default Linux selection,\n" "selectable by just pressing ENTER at the yaboot prompt. This entry will\n" "also be highlighted with a \"*\", if you press [Tab] to see the boot\n" "selections." msgstr "" #: ../../help.pm_.c:825 msgid "" "Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n" "either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n" "these other operating systems are correctly detected and installed. If this\n" "is not the case, you can add an entry by hand in this screen. Be careful as\n" "to choose the correct parameters.\n" "\n" "Yaboot's main options are:\n" "\n" " * Init Message: a simple text message that is displayed before the boot\n" "prompt.\n" "\n" " * Boot Device: indicate where you want to place the information required " "to\n" "boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n" "hold this information.\n" "\n" " * Open Firmware Delay: unlike LILO, there are two delays available with\n" "yaboot. The first delay is measured in seconds and at this point, you can\n" "choose between CD, OF boot, MacOS or Linux.\n" "\n" " * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" "After selecting Linux, you will have this delay in 0.1 second before your\n" "default kernel description is selected.\n" "\n" " * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n" "at the first boot prompt.\n" "\n" " * Enable OF Boot?: checking this option allows you to choose \"N\" for " "Open\n" "Firmware at the first boot prompt.\n" "\n" " * Default OS: you can select which OS will boot by default when the Open\n" "Firmware Delay expires." msgstr "" #: ../../help.pm_.c:858 msgid "" "Here are presented various parameters concerning your machine. Depending on\n" "your installed hardware, you may - or not, see the following entries:\n" "\n" " * \"Mouse\": check the current mouse configuration and click on the button\n" "to change it if necessary.\n" "\n" " * \"Keyboard\": check the current keyboard map configuration and click on\n" "the button to change that if necessary.\n" "\n" " * \"Timezone\": DrakX, by default, guesses your time zone from the " "language\n" "you have chosen. But here again, as for the choice of a keyboard, you may\n" "not be in the country for which the chosen language should correspond.\n" "Hence, you may need to click on the \"Timezone\" button in order to\n" "configure the clock according to the time zone you are in.\n" "\n" " * \"Printer\": clicking on the \"No Printer\" button will open the printer\n" "configuration wizard.\n" "\n" " * \"Sound card\": if a sound card is detected on your system, it is\n" "displayed here. No modification possible at installation time.\n" "\n" " * \"TV card\": if a TV card is detected on your system, it is displayed\n" "here. No modification possible at installation time.\n" "\n" " * \"ISDN card\": if an ISDN card is detected on your system, it is\n" "displayed here. You can click on the button to change the parameters\n" "associated to it." msgstr "" #: ../../help.pm_.c:887 msgid "" "Choose the hard drive you want to erase to install your new Mandrake Linux\n" "partition. Be careful, all data present on it will be lost and will not be\n" "recoverable!" msgstr "" #: ../../help.pm_.c:892 msgid "" "Click on \"OK\" if you want to delete all data and partitions present on\n" "this hard drive. Be careful, after clicking on \"OK\", you will not be able\n" "to recover any data and partitions present on this hard drive, including\n" "any Windows data.\n" "\n" "Click on \"Cancel\" to cancel this operation without losing any data and\n" "partitions present on this hard drive." msgstr "" #: ../../install2.pm_.c:114 #, c-format msgid "" "Can't access kernel modules corresponding to your kernel (file %s is missing)" msgstr "" #: ../../install2.pm_.c:170 #, c-format msgid "You must also format %s" msgstr "" #: ../../install_any.pm_.c:406 #, c-format msgid "" "You have selected the following server(s): %s\n" "\n" "\n" "These servers are activated by default. They don't have any known security\n" "issues, but some new could be found. In that case, you must make sure to " "upgrade\n" "as soon as possible.\n" "\n" "\n" "Do you really want to install these servers?\n" msgstr "" #: ../../install_any.pm_.c:442 msgid "Can't use broadcast with no NIS domain" msgstr "" #: ../../install_any.pm_.c:781 #, c-format msgid "Insert a FAT formatted floppy in drive %s" msgstr "" #: ../../install_any.pm_.c:785 msgid "This floppy is not FAT formatted" msgstr "" #: ../../install_any.pm_.c:797 msgid "" "To use this saved packages selection, boot installation with ``linux " "defcfg=floppy''" msgstr "" #: ../../install_any.pm_.c:819 ../../partition_table.pm_.c:763 #, c-format msgid "Error reading file %s" msgstr "" #: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:327 #: ../../interactive.pm_.c:119 ../../interactive.pm_.c:134 #: ../../interactive.pm_.c:309 ../../interactive.pm_.c:341 #: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170 #: ../../interactive_stdio.pm_.c:141 ../../interactive_stdio.pm_.c:142 #: ../../my_gtk.pm_.c:686 ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041 #: ../../standalone/drakbackup_.c:2285 ../../standalone/drakbackup_.c:2356 #: ../../standalone/drakbackup_.c:2372 msgid "Ok" msgstr "" #: ../../install_interactive.pm_.c:23 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" #: ../../install_interactive.pm_.c:58 msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" #: ../../install_interactive.pm_.c:63 msgid "You must have a swap partition" msgstr "" #: ../../install_interactive.pm_.c:64 msgid "" "You don't have a swap partition\n" "\n" "Continue anyway?" msgstr "" #: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:160 msgid "You must have a FAT partition mounted in /boot/efi" msgstr "" #: ../../install_interactive.pm_.c:90 msgid "Use free space" msgstr "" #: ../../install_interactive.pm_.c:92 msgid "Not enough free space to allocate new partitions" msgstr "" #: ../../install_interactive.pm_.c:100 msgid "Use existing partition" msgstr "" #: ../../install_interactive.pm_.c:102 msgid "There is no existing partition to use" msgstr "" #: ../../install_interactive.pm_.c:109 msgid "Use the Windows partition for loopback" msgstr "" #: ../../install_interactive.pm_.c:112 msgid "Which partition do you want to use for Linux4Win?" msgstr "" #: ../../install_interactive.pm_.c:114 msgid "Choose the sizes" msgstr "" #: ../../install_interactive.pm_.c:115 msgid "Root partition size in MB: " msgstr "" #: ../../install_interactive.pm_.c:116 msgid "Swap partition size in MB: " msgstr "" #: ../../install_interactive.pm_.c:125 msgid "Use the free space on the Windows partition" msgstr "" #: ../../install_interactive.pm_.c:128 msgid "Which partition do you want to resize?" msgstr "" #: ../../install_interactive.pm_.c:130 msgid "Computing Windows filesystem bounds" msgstr "" #: ../../install_interactive.pm_.c:133 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occured: %s" msgstr "" #: ../../install_interactive.pm_.c:136 msgid "Your Windows partition is too fragmented, please run ``defrag'' first" msgstr "" #: ../../install_interactive.pm_.c:137 msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful:\n" "this operation is dangerous. If you have not already done\n" "so, you should first exit the installation, run scandisk\n" "under Windows (and optionally run defrag), then restart the\n" "installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" #: ../../install_interactive.pm_.c:147 msgid "Which size do you want to keep for windows on" msgstr "" #: ../../install_interactive.pm_.c:148 #, c-format msgid "partition %s" msgstr "" #: ../../install_interactive.pm_.c:155 #, c-format msgid "FAT resizing failed: %s" msgstr "" #: ../../install_interactive.pm_.c:170 msgid "" "There is no FAT partitions to resize or to use as loopback (or not enough " "space left)" msgstr "" #: ../../install_interactive.pm_.c:176 msgid "Erase entire disk" msgstr "" #: ../../install_interactive.pm_.c:176 msgid "Remove Windows(TM)" msgstr "" #: ../../install_interactive.pm_.c:179 msgid "You have more than one hard drive, which one do you install linux on?" msgstr "" #: ../../install_interactive.pm_.c:182 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "" #: ../../install_interactive.pm_.c:190 msgid "Custom disk partitioning" msgstr "" #: ../../install_interactive.pm_.c:194 msgid "Use fdisk" msgstr "" #: ../../install_interactive.pm_.c:197 #, c-format msgid "" "You can now partition %s.\n" "When you are done, don't forget to save using `w'" msgstr "" #: ../../install_interactive.pm_.c:226 msgid "You don't have enough free space on your Windows partition" msgstr "" #: ../../install_interactive.pm_.c:242 msgid "I can't find any room for installing" msgstr "" #: ../../install_interactive.pm_.c:246 msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "" #: ../../install_interactive.pm_.c:251 #, c-format msgid "Partitioning failed: %s" msgstr "" #: ../../install_interactive.pm_.c:261 msgid "Bringing up the network" msgstr "" #: ../../install_interactive.pm_.c:266 msgid "Bringing down the network" msgstr "" #: ../../install_steps.pm_.c:73 msgid "" "An error occurred, but I don't know how to handle it nicely.\n" "Continue at your own risk." msgstr "" #: ../../install_steps.pm_.c:202 #, c-format msgid "Duplicate mount point %s" msgstr "" #: ../../install_steps.pm_.c:382 msgid "" "Some important packages didn't get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm" "\"\n" msgstr "" #: ../../install_steps.pm_.c:450 #, c-format msgid "Welcome to %s" msgstr "" #: ../../install_steps.pm_.c:498 ../../install_steps.pm_.c:738 msgid "No floppy drive available" msgstr "" #: ../../install_steps_auto_install.pm_.c:77 #: ../../install_steps_stdio.pm_.c:22 #, c-format msgid "Entering step `%s'\n" msgstr "" #: ../../install_steps_gtk.pm_.c:148 msgid "" "Your system is low on resource. You may have some problem installing\n" "Mandrake Linux. If that occurs, you can try a text install instead. For " "this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" #: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:218 msgid "Install Class" msgstr "" #: ../../install_steps_gtk.pm_.c:162 msgid "Please choose one of the following classes of installation:" msgstr "" #: ../../install_steps_gtk.pm_.c:228 #, c-format msgid "" "The total size for the groups you have selected is approximately %d MB.\n" msgstr "" #: ../../install_steps_gtk.pm_.c:230 #, c-format msgid "" "If you wish to install less than this size,\n" "select the percentage of packages that you want to install.\n" "\n" "A low percentage will install only the most important packages;\n" "a percentage of 100%% will install all selected packages." msgstr "" #: ../../install_steps_gtk.pm_.c:235 #, c-format msgid "" "You have space on your disk for only %d%% of these packages.\n" "\n" "If you wish to install less than this,\n" "select the percentage of packages that you want to install.\n" "A low percentage will install only the most important packages;\n" "a percentage of %d%% will install as many packages as possible." msgstr "" #: ../../install_steps_gtk.pm_.c:241 msgid "You will be able to choose them more specifically in the next step." msgstr "" #: ../../install_steps_gtk.pm_.c:243 msgid "Percentage of packages to install" msgstr "" #: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:701 msgid "Package Group Selection" msgstr "" #: ../../install_steps_gtk.pm_.c:322 ../../install_steps_interactive.pm_.c:716 msgid "Individual package selection" msgstr "" #: ../../install_steps_gtk.pm_.c:345 ../../install_steps_interactive.pm_.c:641 #, c-format msgid "Total size: %d / %d MB" msgstr "" #: ../../install_steps_gtk.pm_.c:390 msgid "Bad package" msgstr "" #: ../../install_steps_gtk.pm_.c:391 #, c-format msgid "Name: %s\n" msgstr "" #: ../../install_steps_gtk.pm_.c:392 #, c-format msgid "Version: %s\n" msgstr "" #: ../../install_steps_gtk.pm_.c:393 #, c-format msgid "Size: %d KB\n" msgstr "" #: ../../install_steps_gtk.pm_.c:394 #, c-format msgid "Importance: %s\n" msgstr "" #: ../../install_steps_gtk.pm_.c:416 msgid "" "You can't select this package as there is not enough space left to install it" msgstr "" #: ../../install_steps_gtk.pm_.c:421 msgid "The following packages are going to be installed" msgstr "" #: ../../install_steps_gtk.pm_.c:422 msgid "The following packages are going to be removed" msgstr "" #: ../../install_steps_gtk.pm_.c:434 msgid "You can't select/unselect this package" msgstr "" #: ../../install_steps_gtk.pm_.c:446 msgid "This is a mandatory package, it can't be unselected" msgstr "" #: ../../install_steps_gtk.pm_.c:448 msgid "You can't unselect this package. It is already installed" msgstr "" #: ../../install_steps_gtk.pm_.c:452 msgid "" "This package must be upgraded\n" "Are you sure you want to deselect it?" msgstr "" #: ../../install_steps_gtk.pm_.c:456 msgid "You can't unselect this package. It must be upgraded" msgstr "" #: ../../install_steps_gtk.pm_.c:461 msgid "Show automatically selected packages" msgstr "" #: ../../install_steps_gtk.pm_.c:462 ../../install_steps_interactive.pm_.c:240 #: ../../install_steps_interactive.pm_.c:244 msgid "Install" msgstr "" #: ../../install_steps_gtk.pm_.c:465 msgid "Load/Save on floppy" msgstr "" #: ../../install_steps_gtk.pm_.c:466 msgid "Updating package selection" msgstr "" #: ../../install_steps_gtk.pm_.c:471 msgid "Minimal install" msgstr "" #: ../../install_steps_gtk.pm_.c:486 ../../install_steps_interactive.pm_.c:549 msgid "Choose the packages you want to install" msgstr "" #: ../../install_steps_gtk.pm_.c:502 ../../install_steps_interactive.pm_.c:783 msgid "Installing" msgstr "" #: ../../install_steps_gtk.pm_.c:508 msgid "Estimating" msgstr "" #: ../../install_steps_gtk.pm_.c:515 msgid "Time remaining " msgstr "" #: ../../install_steps_gtk.pm_.c:527 msgid "Please wait, preparing installation" msgstr "" #: ../../install_steps_gtk.pm_.c:610 #, c-format msgid "%d packages" msgstr "" #: ../../install_steps_gtk.pm_.c:615 #, c-format msgid "Installing package %s" msgstr "" #: ../../install_steps_gtk.pm_.c:656 ../../install_steps_interactive.pm_.c:179 #: ../../install_steps_interactive.pm_.c:807 #: ../../standalone/drakautoinst_.c:203 msgid "Accept" msgstr "" #: ../../install_steps_gtk.pm_.c:656 ../../install_steps_interactive.pm_.c:179 #: ../../install_steps_interactive.pm_.c:807 msgid "Refuse" msgstr "" #: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:808 #, c-format msgid "" "Change your Cd-Rom!\n" "\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you don't have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" #: ../../install_steps_gtk.pm_.c:671 ../../install_steps_gtk.pm_.c:675 #: ../../install_steps_interactive.pm_.c:820 #: ../../install_steps_interactive.pm_.c:824 msgid "Go on anyway?" msgstr "" #: ../../install_steps_gtk.pm_.c:671 ../../install_steps_interactive.pm_.c:820 msgid "There was an error ordering packages:" msgstr "" #: ../../install_steps_gtk.pm_.c:675 ../../install_steps_interactive.pm_.c:824 msgid "There was an error installing packages:" msgstr "" #: ../../install_steps_interactive.pm_.c:10 msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" #: ../../install_steps_interactive.pm_.c:67 msgid "An error occurred" msgstr "" #: ../../install_steps_interactive.pm_.c:85 msgid "Do you really want to leave the installation?" msgstr "" #: ../../install_steps_interactive.pm_.c:102 msgid "License agreement" msgstr "" #: ../../install_steps_interactive.pm_.c:103 msgid "" "Introduction\n" "\n" "The operating system and the different components available in the Mandrake " "Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandrake Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read carefully this document. This document is a license agreement " "between you and \n" "MandrakeSoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if MandrakeSoft S.A. has been advised of the possibility or " "occurance of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandrake Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to MandrakeSoft.\n" "The programs developed by MandrakeSoft S.A. are governed by the GPL License. " "Documentation written \n" "by MandrakeSoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "MandrakeSoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of " "MandrakeSoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact MandrakeSoft S.A. \n" msgstr "" #: ../../install_steps_interactive.pm_.c:199 #: ../../install_steps_interactive.pm_.c:1026 #: ../../standalone/keyboarddrake_.c:28 msgid "Keyboard" msgstr "" #: ../../install_steps_interactive.pm_.c:200 msgid "Please choose your keyboard layout." msgstr "" #: ../../install_steps_interactive.pm_.c:201 msgid "Here is the full list of keyboards available" msgstr "" #: ../../install_steps_interactive.pm_.c:218 msgid "Which installation class do you want?" msgstr "" #: ../../install_steps_interactive.pm_.c:220 msgid "Install/Update" msgstr "" #: ../../install_steps_interactive.pm_.c:220 msgid "Is this an install or an update?" msgstr "" #: ../../install_steps_interactive.pm_.c:229 msgid "Recommended" msgstr "" #: ../../install_steps_interactive.pm_.c:232 #: ../../install_steps_interactive.pm_.c:235 msgid "Expert" msgstr "" #: ../../install_steps_interactive.pm_.c:240 #: ../../install_steps_interactive.pm_.c:244 msgid "Upgrade" msgstr "" #: ../../install_steps_interactive.pm_.c:240 #: ../../install_steps_interactive.pm_.c:244 msgid "Upgrade packages only" msgstr "" #: ../../install_steps_interactive.pm_.c:260 msgid "Please choose the type of your mouse." msgstr "" #: ../../install_steps_interactive.pm_.c:266 ../../standalone/mousedrake_.c:65 msgid "Mouse Port" msgstr "" #: ../../install_steps_interactive.pm_.c:267 ../../standalone/mousedrake_.c:66 msgid "Please choose on which serial port your mouse is connected to." msgstr "" #: ../../install_steps_interactive.pm_.c:275 msgid "Buttons emulation" msgstr "" #: ../../install_steps_interactive.pm_.c:277 msgid "Button 2 Emulation" msgstr "" #: ../../install_steps_interactive.pm_.c:278 msgid "Button 3 Emulation" msgstr "" #: ../../install_steps_interactive.pm_.c:299 msgid "Configuring PCMCIA cards..." msgstr "" #: ../../install_steps_interactive.pm_.c:299 msgid "PCMCIA" msgstr "" #: ../../install_steps_interactive.pm_.c:306 msgid "Configuring IDE" msgstr "" #: ../../install_steps_interactive.pm_.c:306 msgid "IDE" msgstr "" #: ../../install_steps_interactive.pm_.c:321 msgid "no available partitions" msgstr "" #: ../../install_steps_interactive.pm_.c:324 msgid "Scanning partitions to find mount points" msgstr "" #: ../../install_steps_interactive.pm_.c:332 msgid "Choose the mount points" msgstr "" #: ../../install_steps_interactive.pm_.c:351 #, c-format msgid "" "I can't read your partition table, it's too corrupted for me :(\n" "I can try to go on blanking bad partitions (ALL DATA will be lost!).\n" "The other solution is to disallow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to loose all the partitions?\n" msgstr "" #: ../../install_steps_interactive.pm_.c:364 msgid "" "DiskDrake failed to read correctly the partition table.\n" "Continue at your own risk!" msgstr "" #: ../../install_steps_interactive.pm_.c:380 msgid "" "No free space for 1MB bootstrap! Install will continue, but to boot your " "system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" #: ../../install_steps_interactive.pm_.c:389 msgid "No root partition found to perform an upgrade" msgstr "" #: ../../install_steps_interactive.pm_.c:390 msgid "Root Partition" msgstr "" #: ../../install_steps_interactive.pm_.c:391 msgid "What is the root partition (/) of your system?" msgstr "" #: ../../install_steps_interactive.pm_.c:405 msgid "You need to reboot for the partition table modifications to take place" msgstr "" #: ../../install_steps_interactive.pm_.c:429 msgid "Choose the partitions you want to format" msgstr "" #: ../../install_steps_interactive.pm_.c:430 msgid "Check bad blocks?" msgstr "" #: ../../install_steps_interactive.pm_.c:456 msgid "Formatting partitions" msgstr "" #: ../../install_steps_interactive.pm_.c:458 #, c-format msgid "Creating and formatting file %s" msgstr "" #: ../../install_steps_interactive.pm_.c:461 msgid "Not enough swap to fulfill installation, please add some" msgstr "" #: ../../install_steps_interactive.pm_.c:467 msgid "Looking for available packages" msgstr "" #: ../../install_steps_interactive.pm_.c:473 msgid "Finding packages to upgrade" msgstr "" #: ../../install_steps_interactive.pm_.c:490 #, c-format msgid "" "Your system has not enough space left for installation or upgrade (%d > %d)" msgstr "" #: ../../install_steps_interactive.pm_.c:509 #, c-format msgid "Complete (%dMB)" msgstr "" #: ../../install_steps_interactive.pm_.c:509 #, c-format msgid "Minimum (%dMB)" msgstr "" #: ../../install_steps_interactive.pm_.c:509 #, c-format msgid "Recommended (%dMB)" msgstr "" #: ../../install_steps_interactive.pm_.c:564 msgid "" "Please choose load or save package selection on floppy.\n" "The format is the same as auto_install generated floppies." msgstr "" #: ../../install_steps_interactive.pm_.c:567 msgid "Load from floppy" msgstr "" #: ../../install_steps_interactive.pm_.c:569 msgid "Loading from floppy" msgstr "" #: ../../install_steps_interactive.pm_.c:569 msgid "Package selection" msgstr "" #: ../../install_steps_interactive.pm_.c:574 msgid "Insert a floppy containing package selection" msgstr "" #: ../../install_steps_interactive.pm_.c:586 msgid "Save on floppy" msgstr "" #: ../../install_steps_interactive.pm_.c:654 msgid "Selected size is larger than available space" msgstr "" #: ../../install_steps_interactive.pm_.c:667 msgid "Type of install" msgstr "" #: ../../install_steps_interactive.pm_.c:668 msgid "" "You do not have selected any group of packages\n" "Please choose the minimal installation you want" msgstr "" #: ../../install_steps_interactive.pm_.c:671 msgid "With X" msgstr "" #: ../../install_steps_interactive.pm_.c:673 msgid "With basic documentation (recommended!)" msgstr "" #: ../../install_steps_interactive.pm_.c:674 msgid "Truly minimal install (especially no urpmi)" msgstr "" #: ../../install_steps_interactive.pm_.c:758 msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" #: ../../install_steps_interactive.pm_.c:763 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "" #: ../../install_steps_interactive.pm_.c:783 msgid "Preparing installation" msgstr "" #: ../../install_steps_interactive.pm_.c:792 #, c-format msgid "" "Installing package %s\n" "%d%%" msgstr "" #: ../../install_steps_interactive.pm_.c:838 msgid "Post-install configuration" msgstr "" #: ../../install_steps_interactive.pm_.c:844 #, c-format msgid "Please insert the Boot floppy used in drive %s" msgstr "" #: ../../install_steps_interactive.pm_.c:850 #, c-format msgid "Please insert the Update Modules floppy in drive %s" msgstr "" #: ../../install_steps_interactive.pm_.c:870 msgid "" "You have now the possibility to download software aimed for encryption.\n" "\n" "WARNING:\n" "\n" "Due to different general requirements applicable to these software and " "imposed\n" "by various jurisdictions, customer and/or end user of theses software " "should\n" "ensure that the laws of his/their jurisdiction allow him/them to download, " "stock\n" "and/or use these software.\n" "\n" "In addition customer and/or end user shall particularly be aware to not " "infringe\n" "the laws of his/their jurisdiction. Should customer and/or end user not\n" "respect the provision of these applicable laws, he/they will incure serious\n" "sanctions.\n" "\n" "In no event shall Mandrakesoft nor its manufacturers and/or suppliers be " "liable\n" "for special, indirect or incidental damages whatsoever (including, but not\n" "limited to loss of profits, business interruption, loss of commercial data " "and\n" "other pecuniary losses, and eventual liabilities and indemnification to be " "paid\n" "pursuant to a court decision) arising out of use, possession, or the sole\n" "downloading of these software, to which customer and/or end user could\n" "eventually have access after having sign up the present agreement.\n" "\n" "\n" "For any queries relating to these agreement, please contact \n" "Mandrakesoft, Inc.\n" "2400 N. Lincoln Avenue Suite 243\n" "Altadena California 91001\n" "USA" msgstr "" #: ../../install_steps_interactive.pm_.c:908 msgid "" "You have now the possibility to download updated packages that have\n" "been released after the distribution has been made available.\n" "\n" "You will get security fixes or bug fixes, but you need to have an\n" "Internet connection configured to proceed.\n" "\n" "Do you want to install the updates ?" msgstr "" #: ../../install_steps_interactive.pm_.c:922 msgid "Contacting Mandrake Linux web site to get the list of available mirrors" msgstr "" #: ../../install_steps_interactive.pm_.c:927 msgid "Choose a mirror from which to get the packages" msgstr "" #: ../../install_steps_interactive.pm_.c:936 msgid "Contacting the mirror to get the list of available packages" msgstr "" #: ../../install_steps_interactive.pm_.c:963 msgid "Which is your timezone?" msgstr "" #: ../../install_steps_interactive.pm_.c:968 msgid "Hardware clock set to GMT" msgstr "" #: ../../install_steps_interactive.pm_.c:969 msgid "Automatic time synchronization (using NTP)" msgstr "" #: ../../install_steps_interactive.pm_.c:976 msgid "NTP Server" msgstr "" #: ../../install_steps_interactive.pm_.c:1010 #: ../../install_steps_interactive.pm_.c:1018 ../../printerdrake.pm_.c:103 msgid "Remote CUPS server" msgstr "" #: ../../install_steps_interactive.pm_.c:1011 msgid "No printer" msgstr "" #: ../../install_steps_interactive.pm_.c:1022 ../../steps.pm_.c:27 msgid "Summary" msgstr "" #: ../../install_steps_interactive.pm_.c:1025 msgid "Mouse" msgstr "" #: ../../install_steps_interactive.pm_.c:1027 msgid "Timezone" msgstr "" #: ../../install_steps_interactive.pm_.c:1028 ../../printerdrake.pm_.c:2224 #: ../../printerdrake.pm_.c:2295 msgid "Printer" msgstr "" #: ../../install_steps_interactive.pm_.c:1030 msgid "ISDN card" msgstr "" #: ../../install_steps_interactive.pm_.c:1033 msgid "Sound card" msgstr "" #: ../../install_steps_interactive.pm_.c:1036 msgid "TV card" msgstr "" #: ../../install_steps_interactive.pm_.c:1074 #: ../../install_steps_interactive.pm_.c:1098 #: ../../install_steps_interactive.pm_.c:1102 msgid "LDAP" msgstr "" #: ../../install_steps_interactive.pm_.c:1075 #: ../../install_steps_interactive.pm_.c:1098 #: ../../install_steps_interactive.pm_.c:1111 msgid "NIS" msgstr "" #: ../../install_steps_interactive.pm_.c:1076 #: ../../install_steps_interactive.pm_.c:1098 msgid "Local files" msgstr "" #: ../../install_steps_interactive.pm_.c:1085 #: ../../install_steps_interactive.pm_.c:1086 ../../steps.pm_.c:24 msgid "Set root password" msgstr "" #: ../../install_steps_interactive.pm_.c:1087 msgid "No password" msgstr "" #: ../../install_steps_interactive.pm_.c:1092 #, c-format msgid "This password is too simple (must be at least %d characters long)" msgstr "" #: ../../install_steps_interactive.pm_.c:1098 ../../network/modem.pm_.c:49 #: ../../standalone/draknet_.c:625 ../../standalone/logdrake_.c:172 msgid "Authentication" msgstr "" #: ../../install_steps_interactive.pm_.c:1106 msgid "Authentication LDAP" msgstr "" #: ../../install_steps_interactive.pm_.c:1107 msgid "LDAP Base dn" msgstr "" #: ../../install_steps_interactive.pm_.c:1108 msgid "LDAP Server" msgstr "" #: ../../install_steps_interactive.pm_.c:1114 msgid "Authentication NIS" msgstr "" #: ../../install_steps_interactive.pm_.c:1115 msgid "NIS Domain" msgstr "" #: ../../install_steps_interactive.pm_.c:1116 msgid "NIS Server" msgstr "" #: ../../install_steps_interactive.pm_.c:1151 msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "SILO on your system, or another operating system removes SILO, or SILO " "doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures.\n" "\n" "If you want to create a bootdisk for your system, insert a floppy in the " "first\n" "drive and press \"Ok\"." msgstr "" #: ../../install_steps_interactive.pm_.c:1167 msgid "First floppy drive" msgstr "" #: ../../install_steps_interactive.pm_.c:1168 msgid "Second floppy drive" msgstr "" #: ../../install_steps_interactive.pm_.c:1169 ../../printerdrake.pm_.c:1816 msgid "Skip" msgstr "" #: ../../install_steps_interactive.pm_.c:1174 msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "LILO (or grub) on your system, or another operating system removes LILO, or " "LILO doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures. Would you like to create a bootdisk for your system?" msgstr "" #: ../../install_steps_interactive.pm_.c:1183 msgid "Sorry, no floppy drive available" msgstr "" #: ../../install_steps_interactive.pm_.c:1187 msgid "Choose the floppy drive you want to use to make the bootdisk" msgstr "" #: ../../install_steps_interactive.pm_.c:1191 #, c-format msgid "Insert a floppy in %s" msgstr "" #: ../../install_steps_interactive.pm_.c:1194 msgid "Creating bootdisk" msgstr "" #: ../../install_steps_interactive.pm_.c:1201 msgid "Preparing bootloader" msgstr "" #: ../../install_steps_interactive.pm_.c:1212 msgid "" "You appear to have an OldWorld or Unknown\n" " machine, the yaboot bootloader will not work for you.\n" "The install will continue, but you'll\n" " need to use BootX to boot your machine" msgstr "" #: ../../install_steps_interactive.pm_.c:1218 msgid "Do you want to use aboot?" msgstr "" #: ../../install_steps_interactive.pm_.c:1221 msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" #: ../../install_steps_interactive.pm_.c:1228 msgid "Installing bootloader" msgstr "" #: ../../install_steps_interactive.pm_.c:1234 msgid "Installation of bootloader failed. The following error occured:" msgstr "" #: ../../install_steps_interactive.pm_.c:1242 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you don't see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" #: ../../install_steps_interactive.pm_.c:1286 #: ../../standalone/drakautoinst_.c:81 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "" #: ../../install_steps_interactive.pm_.c:1290 #: ../../standalone/drakautoinst_.c:83 msgid "Creating auto install floppy" msgstr "" #: ../../install_steps_interactive.pm_.c:1301 msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" #: ../../install_steps_interactive.pm_.c:1312 msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "For information on fixes which are available for this release of Mandrake " "Linux,\n" "consult the Errata available from http://www.mandrakelinux.com/.\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Mandrake Linux User's Guide." msgstr "" #: ../../install_steps_interactive.pm_.c:1324 msgid "Generate auto install floppy" msgstr "" #: ../../install_steps_interactive.pm_.c:1326 msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" "(this is meant for installing on another box).\n" "\n" "You may prefer to replay the installation.\n" msgstr "" #: ../../install_steps_interactive.pm_.c:1331 msgid "Automated" msgstr "" #: ../../install_steps_interactive.pm_.c:1331 msgid "Replay" msgstr "" #: ../../install_steps_interactive.pm_.c:1334 msgid "Save packages selection" msgstr "" #: ../../install_steps_newt.pm_.c:22 #, c-format msgid "Mandrake Linux Installation %s" msgstr "" #: ../../install_steps_newt.pm_.c:34 msgid "" " / between elements | selects | next screen " msgstr "" #: ../../interactive.pm_.c:86 msgid "kdesu missing" msgstr "" #: ../../interactive.pm_.c:144 msgid "Choose a file" msgstr "" #: ../../interactive.pm_.c:306 msgid "Advanced" msgstr "" #: ../../interactive.pm_.c:307 msgid "Basic" msgstr "" #: ../../interactive.pm_.c:378 msgid "Please wait" msgstr "" #: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222 msgid "Info" msgstr "" #: ../../interactive_gtk.pm_.c:715 msgid "Expand Tree" msgstr "" #: ../../interactive_gtk.pm_.c:716 msgid "Collapse Tree" msgstr "" #: ../../interactive_gtk.pm_.c:717 msgid "Toggle between flat and group sorted" msgstr "" #: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147 msgid "Bad choice, try again\n" msgstr "" #: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148 #, c-format msgid "Your choice? (default %s) " msgstr "" #: ../../interactive_stdio.pm_.c:52 #, c-format msgid "" "Entries you'll have to fill:\n" "%s" msgstr "" #: ../../interactive_stdio.pm_.c:68 #, c-format msgid "Your choice? (0/1, default `%s') " msgstr "" #: ../../interactive_stdio.pm_.c:93 #, c-format msgid "Button `%s': %s" msgstr "" #: ../../interactive_stdio.pm_.c:94 msgid "Do you want to click on this button? " msgstr "" #: ../../interactive_stdio.pm_.c:103 #, c-format msgid "Your choice? (default `%s'%s) " msgstr "" #: ../../interactive_stdio.pm_.c:121 #, c-format msgid "=> There are many things to choose from (%s).\n" msgstr "" #: ../../interactive_stdio.pm_.c:124 msgid "" "Please choose the first number of the 10-range you wish to edit,\n" "or just hit Enter to proceed.\n" "Your choice? " msgstr "" #: ../../interactive_stdio.pm_.c:137 #, c-format msgid "" "=> Notice, a label changed:\n" "%s" msgstr "" #: ../../interactive_stdio.pm_.c:144 msgid "Re-submit" msgstr "" #: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:175 msgid "Czech (QWERTZ)" msgstr "" #: ../../keyboard.pm_.c:142 ../../keyboard.pm_.c:177 msgid "German" msgstr "" #: ../../keyboard.pm_.c:143 msgid "Dvorak" msgstr "" #: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:184 msgid "Spanish" msgstr "" #: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:185 msgid "Finnish" msgstr "" #: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:186 msgid "French" msgstr "" #: ../../keyboard.pm_.c:147 ../../keyboard.pm_.c:211 msgid "Norwegian" msgstr "" #: ../../keyboard.pm_.c:148 msgid "Polish" msgstr "" #: ../../keyboard.pm_.c:149 ../../keyboard.pm_.c:219 msgid "Russian" msgstr "" #: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:221 msgid "Swedish" msgstr "" #: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:238 msgid "UK keyboard" msgstr "" #: ../../keyboard.pm_.c:153 ../../keyboard.pm_.c:239 msgid "US keyboard" msgstr "" #: ../../keyboard.pm_.c:155 msgid "Albanian" msgstr "" #: ../../keyboard.pm_.c:156 msgid "Armenian (old)" msgstr "" #: ../../keyboard.pm_.c:157 msgid "Armenian (typewriter)" msgstr "" #: ../../keyboard.pm_.c:158 msgid "Armenian (phonetic)" msgstr "" #: ../../keyboard.pm_.c:163 msgid "Azerbaidjani (latin)" msgstr "" #: ../../keyboard.pm_.c:165 msgid "Belgian" msgstr "" #: ../../keyboard.pm_.c:166 msgid "Bulgarian (phonetic)" msgstr "" #: ../../keyboard.pm_.c:167 msgid "Bulgarian (BDS)" msgstr "" #: ../../keyboard.pm_.c:168 msgid "Brazilian (ABNT-2)" msgstr "" #: ../../keyboard.pm_.c:169 msgid "Belarusian" msgstr "" #: ../../keyboard.pm_.c:170 msgid "Swiss (German layout)" msgstr "" #: ../../keyboard.pm_.c:171 msgid "Swiss (French layout)" msgstr "" #: ../../keyboard.pm_.c:176 msgid "Czech (QWERTY)" msgstr "" #: ../../keyboard.pm_.c:178 msgid "German (no dead keys)" msgstr "" #: ../../keyboard.pm_.c:179 msgid "Danish" msgstr "" #: ../../keyboard.pm_.c:180 msgid "Dvorak (US)" msgstr "" #: ../../keyboard.pm_.c:181 msgid "Dvorak (Norwegian)" msgstr "" #: ../../keyboard.pm_.c:182 msgid "Dvorak (Swedish)" msgstr "" #: ../../keyboard.pm_.c:183 msgid "Estonian" msgstr "" #: ../../keyboard.pm_.c:187 msgid "Georgian (\"Russian\" layout)" msgstr "" #: ../../keyboard.pm_.c:188 msgid "Georgian (\"Latin\" layout)" msgstr "" #: ../../keyboard.pm_.c:189 msgid "Greek" msgstr "" #: ../../keyboard.pm_.c:190 msgid "Hungarian" msgstr "" #: ../../keyboard.pm_.c:191 msgid "Croatian" msgstr "" #: ../../keyboard.pm_.c:192 msgid "Israeli" msgstr "" #: ../../keyboard.pm_.c:193 msgid "Israeli (Phonetic)" msgstr "" #: ../../keyboard.pm_.c:194 msgid "Iranian" msgstr "" #: ../../keyboard.pm_.c:195 msgid "Icelandic" msgstr "" #: ../../keyboard.pm_.c:196 msgid "Italian" msgstr "" #: ../../keyboard.pm_.c:198 msgid "Japanese 106 keys" msgstr "" #: ../../keyboard.pm_.c:201 msgid "Korean keyboard" msgstr "" #: ../../keyboard.pm_.c:202 msgid "Latin American" msgstr "" #: ../../keyboard.pm_.c:203 msgid "Lithuanian AZERTY (old)" msgstr "" #: ../../keyboard.pm_.c:205 msgid "Lithuanian AZERTY (new)" msgstr "" #: ../../keyboard.pm_.c:206 msgid "Lithuanian \"number row\" QWERTY" msgstr "" #: ../../keyboard.pm_.c:207 msgid "Lithuanian \"phonetic\" QWERTY" msgstr "" #: ../../keyboard.pm_.c:208 msgid "Latvian" msgstr "" #: ../../keyboard.pm_.c:209 msgid "Macedonian" msgstr "" #: ../../keyboard.pm_.c:210 msgid "Dutch" msgstr "" #: ../../keyboard.pm_.c:212 msgid "Polish (qwerty layout)" msgstr "" #: ../../keyboard.pm_.c:213 msgid "Polish (qwertz layout)" msgstr "" #: ../../keyboard.pm_.c:214 msgid "Portuguese" msgstr "" #: ../../keyboard.pm_.c:215 msgid "Canadian (Quebec)" msgstr "" #: ../../keyboard.pm_.c:217 msgid "Romanian (qwertz)" msgstr "" #: ../../keyboard.pm_.c:218 msgid "Romanian (qwerty)" msgstr "" #: ../../keyboard.pm_.c:220 msgid "Russian (Yawerty)" msgstr "" #: ../../keyboard.pm_.c:222 msgid "Slovenian" msgstr "" #: ../../keyboard.pm_.c:226 msgid "Slovakian (QWERTZ)" msgstr "" #: ../../keyboard.pm_.c:227 msgid "Slovakian (QWERTY)" msgstr "" #: ../../keyboard.pm_.c:229 msgid "Serbian (cyrillic)" msgstr "" #: ../../keyboard.pm_.c:231 msgid "Tamil" msgstr "" #: ../../keyboard.pm_.c:232 msgid "Thai keyboard" msgstr "" #: ../../keyboard.pm_.c:234 msgid "Tajik keyboard" msgstr "" #: ../../keyboard.pm_.c:235 msgid "Turkish (traditional \"F\" model)" msgstr "" #: ../../keyboard.pm_.c:236 msgid "Turkish (modern \"Q\" model)" msgstr "" #: ../../keyboard.pm_.c:237 msgid "Ukrainian" msgstr "" #: ../../keyboard.pm_.c:240 msgid "US keyboard (international)" msgstr "" #: ../../keyboard.pm_.c:241 msgid "Vietnamese \"numeric row\" QWERTY" msgstr "" #: ../../keyboard.pm_.c:242 msgid "Yugoslavian (latin)" msgstr "" #: ../../loopback.pm_.c:32 #, c-format msgid "Circular mounts %s\n" msgstr "" #: ../../lvm.pm_.c:83 msgid "Remove the logical volumes first\n" msgstr "" #: ../../modules.pm_.c:816 msgid "" "PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel." msgstr "" #: ../../mouse.pm_.c:25 msgid "Sun - Mouse" msgstr "" #: ../../mouse.pm_.c:31 msgid "Standard" msgstr "" #: ../../mouse.pm_.c:32 msgid "Logitech MouseMan+" msgstr "" #: ../../mouse.pm_.c:33 msgid "Generic PS2 Wheel Mouse" msgstr "" #: ../../mouse.pm_.c:34 msgid "GlidePoint" msgstr "" #: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63 msgid "Kensington Thinking Mouse" msgstr "" #: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59 msgid "Genius NetMouse" msgstr "" #: ../../mouse.pm_.c:38 msgid "Genius NetScroll" msgstr "" #: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68 msgid "1 button" msgstr "" #: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51 msgid "Generic 2 Button Mouse" msgstr "" #: ../../mouse.pm_.c:45 msgid "Generic" msgstr "" #: ../../mouse.pm_.c:46 msgid "Wheel" msgstr "" #: ../../mouse.pm_.c:49 msgid "serial" msgstr "" #: ../../mouse.pm_.c:52 msgid "Generic 3 Button Mouse" msgstr "" #: ../../mouse.pm_.c:53 msgid "Microsoft IntelliMouse" msgstr "" #: ../../mouse.pm_.c:54 msgid "Logitech MouseMan" msgstr "" #: ../../mouse.pm_.c:55 msgid "Mouse Systems" msgstr "" #: ../../mouse.pm_.c:57 msgid "Logitech CC Series" msgstr "" #: ../../mouse.pm_.c:58 msgid "Logitech MouseMan+/FirstMouse+" msgstr "" #: ../../mouse.pm_.c:60 msgid "MM Series" msgstr "" #: ../../mouse.pm_.c:61 msgid "MM HitTablet" msgstr "" #: ../../mouse.pm_.c:62 msgid "Logitech Mouse (serial, old C7 type)" msgstr "" #: ../../mouse.pm_.c:66 msgid "busmouse" msgstr "" #: ../../mouse.pm_.c:69 msgid "2 buttons" msgstr "" #: ../../mouse.pm_.c:70 msgid "3 buttons" msgstr "" #: ../../mouse.pm_.c:73 msgid "none" msgstr "" #: ../../mouse.pm_.c:75 msgid "No mouse" msgstr "" #: ../../mouse.pm_.c:483 msgid "Please test the mouse" msgstr "" #: ../../mouse.pm_.c:484 msgid "To activate the mouse," msgstr "" #: ../../mouse.pm_.c:485 msgid "MOVE YOUR WHEEL!" msgstr "" #: ../../my_gtk.pm_.c:412 msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*" msgstr "" #: ../../my_gtk.pm_.c:651 msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" msgstr "" #: ../../my_gtk.pm_.c:686 msgid "Finish" msgstr "" #: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1556 msgid "Next ->" msgstr "" #: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1554 msgid "<- Previous" msgstr "" #: ../../my_gtk.pm_.c:1019 msgid "Is this correct?" msgstr "" #: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36 msgid "Connect to the Internet" msgstr "" #: ../../network/adsl.pm_.c:20 msgid "" "The most common way to connect with adsl is pppoe.\n" "Some connections use pptp, a few ones use dhcp.\n" "If you don't know, choose 'use pppoe'" msgstr "" #: ../../network/adsl.pm_.c:22 msgid "Alcatel speedtouch usb" msgstr "" #: ../../network/adsl.pm_.c:22 msgid "use dhcp" msgstr "" #: ../../network/adsl.pm_.c:22 msgid "use pppoe" msgstr "" #: ../../network/adsl.pm_.c:22 msgid "use pptp" msgstr "" #: ../../network/ethernet.pm_.c:37 msgid "" "Which dhcp client do you want to use?\n" "Default is dhcpcd" msgstr "" #: ../../network/ethernet.pm_.c:88 msgid "" "No ethernet network adapter has been detected on your system.\n" "I cannot set up this connection type." msgstr "" #: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:243 msgid "Choose the network interface" msgstr "" #: ../../network/ethernet.pm_.c:93 msgid "" "Please choose which network adapter you want to use to connect to Internet" msgstr "" #: ../../network/ethernet.pm_.c:178 msgid "no network card found" msgstr "" #: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360 msgid "Configuring network" msgstr "" #: ../../network/ethernet.pm_.c:203 msgid "" "Please enter your host name if you know it.\n" "Some DHCP servers require the hostname to work.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''." msgstr "" #: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365 msgid "Host name" msgstr "" #: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44 #: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109 #: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:174 #: ../../network/netconnect.pm_.c:201 ../../network/netconnect.pm_.c:224 #: ../../network/netconnect.pm_.c:232 msgid "Network Configuration Wizard" msgstr "" #: ../../network/isdn.pm_.c:22 msgid "External ISDN modem" msgstr "" #: ../../network/isdn.pm_.c:22 msgid "Internal ISDN card" msgstr "" #: ../../network/isdn.pm_.c:22 msgid "What kind is your ISDN connection?" msgstr "" #: ../../network/isdn.pm_.c:45 msgid "" "Which ISDN configuration do you prefer?\n" "\n" "* The Old configuration uses isdn4net. It contains powerfull\n" " tools, but is tricky to configure, and not standard.\n" "\n" "* The New configuration is easier to understand, more\n" " standard, but with less tools.\n" "\n" "We recommand the light configuration.\n" msgstr "" #: ../../network/isdn.pm_.c:54 msgid "New configuration (isdn-light)" msgstr "" #: ../../network/isdn.pm_.c:54 msgid "Old configuration (isdn4net)" msgstr "" #: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188 #: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205 #: ../../network/isdn.pm_.c:215 msgid "ISDN Configuration" msgstr "" #: ../../network/isdn.pm_.c:170 msgid "" "Select your provider.\n" " If it's not in the list, choose Unlisted" msgstr "" #: ../../network/isdn.pm_.c:183 msgid "Europe protocol" msgstr "" #: ../../network/isdn.pm_.c:183 msgid "Europe protocol (EDSS1)" msgstr "" #: ../../network/isdn.pm_.c:185 msgid "Protocol for the rest of the world" msgstr "" #: ../../network/isdn.pm_.c:185 msgid "" "Protocol for the rest of the world \n" " no D-Channel (leased lines)" msgstr "" #: ../../network/isdn.pm_.c:189 msgid "Which protocol do you want to use ?" msgstr "" #: ../../network/isdn.pm_.c:199 msgid "What kind of card do you have?" msgstr "" #: ../../network/isdn.pm_.c:200 msgid "I don't know" msgstr "" #: ../../network/isdn.pm_.c:200 msgid "ISA / PCMCIA" msgstr "" #: ../../network/isdn.pm_.c:200 msgid "PCI" msgstr "" #: ../../network/isdn.pm_.c:206 msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the irq and io of your card.\n" msgstr "" #: ../../network/isdn.pm_.c:210 msgid "Abort" msgstr "" #: ../../network/isdn.pm_.c:210 msgid "Continue" msgstr "" #: ../../network/isdn.pm_.c:216 msgid "Which is your ISDN card ?" msgstr "" #: ../../network/isdn.pm_.c:235 msgid "" "I have detected an ISDN PCI Card, but I don't know the type. Please select " "one PCI card on the next screen." msgstr "" #: ../../network/isdn.pm_.c:244 msgid "No ISDN PCI card found. Please select one on the next screen." msgstr "" #: ../../network/modem.pm_.c:39 msgid "Please choose which serial port your modem is connected to." msgstr "" #: ../../network/modem.pm_.c:44 msgid "Dialup options" msgstr "" #: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:621 msgid "Connection name" msgstr "" #: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:622 msgid "Phone number" msgstr "" #: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:623 msgid "Login ID" msgstr "" #: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:625 msgid "CHAP" msgstr "" #: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:625 msgid "PAP" msgstr "" #: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:625 msgid "Script-based" msgstr "" #: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:625 msgid "Terminal-based" msgstr "" #: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:626 msgid "Domain name" msgstr "" #: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:627 msgid "First DNS Server (optional)" msgstr "" #: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:628 msgid "Second DNS Server (optional)" msgstr "" #: ../../network/netconnect.pm_.c:34 msgid "" "\n" "You can disconnect or reconfigure your connection." msgstr "" #: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37 msgid "" "\n" "You can reconfigure your connection." msgstr "" #: ../../network/netconnect.pm_.c:34 msgid "You are currently connected to internet." msgstr "" #: ../../network/netconnect.pm_.c:37 msgid "" "\n" "You can connect to Internet or reconfigure your connection." msgstr "" #: ../../network/netconnect.pm_.c:37 msgid "You are not currently connected to Internet." msgstr "" #: ../../network/netconnect.pm_.c:41 msgid "Connect" msgstr "" #: ../../network/netconnect.pm_.c:43 msgid "Disconnect" msgstr "" #: ../../network/netconnect.pm_.c:45 msgid "Configure the connection" msgstr "" #: ../../network/netconnect.pm_.c:50 msgid "Internet connection & configuration" msgstr "" #: ../../network/netconnect.pm_.c:100 #, c-format msgid "We are now going to configure the %s connection." msgstr "" #: ../../network/netconnect.pm_.c:109 #, c-format msgid "" "\n" "\n" "\n" "We are now going to configure the %s connection.\n" "\n" "\n" "Press OK to continue." msgstr "" #: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:251 #: ../../network/netconnect.pm_.c:270 ../../network/tools.pm_.c:57 msgid "Network Configuration" msgstr "" #: ../../network/netconnect.pm_.c:139 msgid "" "Because you are doing a network installation, your network is already " "configured.\n" "Click on Ok to keep your configuration, or cancel to reconfigure your " "Internet & Network connection.\n" msgstr "" #: ../../network/netconnect.pm_.c:165 msgid "" "Welcome to The Network Configuration Wizard\n" "\n" "We are about to configure your internet/network connection.\n" "If you don't want to use the auto detection, deselect the checkbox.\n" msgstr "" #: ../../network/netconnect.pm_.c:167 msgid "Choose the profile to configure" msgstr "" #: ../../network/netconnect.pm_.c:168 msgid "Use auto detection" msgstr "" #: ../../network/netconnect.pm_.c:174 msgid "Detecting devices..." msgstr "" #: ../../network/netconnect.pm_.c:185 ../../network/netconnect.pm_.c:194 msgid "Normal modem connection" msgstr "" #: ../../network/netconnect.pm_.c:185 ../../network/netconnect.pm_.c:194 #, c-format msgid "detected on port %s" msgstr "" #: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195 msgid "ISDN connection" msgstr "" #: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195 #, c-format msgid "detected %s" msgstr "" #: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196 msgid "ADSL connection" msgstr "" #: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196 #, c-format msgid "detected on interface %s" msgstr "" #: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197 msgid "Cable connection" msgstr "" #: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197 msgid "cable connection detected" msgstr "" #: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198 msgid "LAN connection" msgstr "" #: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198 msgid "ethernet card(s) detected" msgstr "" #: ../../network/netconnect.pm_.c:201 msgid "Choose the connection you want to configure" msgstr "" #: ../../network/netconnect.pm_.c:225 msgid "" "You have configured multiple ways to connect to the Internet.\n" "Choose the one you want to use.\n" "\n" msgstr "" #: ../../network/netconnect.pm_.c:226 msgid "Internet connection" msgstr "" #: ../../network/netconnect.pm_.c:232 msgid "Do you want to start the connection at boot?" msgstr "" #: ../../network/netconnect.pm_.c:246 msgid "Network configuration" msgstr "" #: ../../network/netconnect.pm_.c:247 msgid "The network needs to be restarted" msgstr "" #: ../../network/netconnect.pm_.c:251 #, c-format msgid "" "A problem occured while restarting the network: \n" "\n" "%s" msgstr "" #: ../../network/netconnect.pm_.c:260 msgid "" "Congratulations, the network and Internet configuration is finished.\n" "The configuration will now be applied to your system.\n" "\n" msgstr "" #: ../../network/netconnect.pm_.c:264 msgid "" "After this is done, we recommend that you restart your X environment to " "avoid any hostname-related problems." msgstr "" #: ../../network/netconnect.pm_.c:265 msgid "" "Problems occured during configuration.\n" "Test your connection via net_monitor or mcc. If your connection doesn't " "work, you might want to relaunch the configuration" msgstr "" #: ../../network/network.pm_.c:292 msgid "" "WARNING: This device has been previously configured to connect to the " "Internet.\n" "Simply accept to keep this device configured.\n" "Modifying the fields below will override this configuration." msgstr "" #: ../../network/network.pm_.c:297 msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" #: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307 #, c-format msgid "Configuring network device %s" msgstr "" #: ../../network/network.pm_.c:307 #, c-format msgid " (driver %s)" msgstr "" #: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232 #: ../../standalone/draknet_.c:467 msgid "IP address" msgstr "" #: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:468 msgid "Netmask" msgstr "" #: ../../network/network.pm_.c:311 msgid "(bootp/dhcp)" msgstr "" #: ../../network/network.pm_.c:311 msgid "Automatic IP" msgstr "" #: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:733 msgid "IP address should be in format 1.2.3.4" msgstr "" #: ../../network/network.pm_.c:361 msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one" msgstr "" #: ../../network/network.pm_.c:366 msgid "DNS server" msgstr "" #: ../../network/network.pm_.c:367 #, c-format msgid "Gateway (e.g. %s)" msgstr "" #: ../../network/network.pm_.c:369 msgid "Gateway device" msgstr "" #: ../../network/network.pm_.c:381 msgid "Proxies configuration" msgstr "" #: ../../network/network.pm_.c:382 msgid "HTTP proxy" msgstr "" #: ../../network/network.pm_.c:383 msgid "FTP proxy" msgstr "" #: ../../network/network.pm_.c:384 msgid "Track network card id (usefull for laptops)" msgstr "" #: ../../network/network.pm_.c:387 msgid "Proxy should be http://..." msgstr "" #: ../../network/network.pm_.c:388 msgid "Proxy should be ftp://..." msgstr "" #: ../../network/tools.pm_.c:39 msgid "Internet configuration" msgstr "" #: ../../network/tools.pm_.c:40 msgid "Do you want to try to connect to the Internet now?" msgstr "" #: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197 msgid "Testing your connection..." msgstr "" #: ../../network/tools.pm_.c:50 msgid "The system is now connected to Internet." msgstr "" #: ../../network/tools.pm_.c:51 msgid "For Security reason, it will be disconnected now." msgstr "" #: ../../network/tools.pm_.c:52 msgid "" "The system doesn't seem to be connected to internet.\n" "Try to reconfigure your connection." msgstr "" #: ../../network/tools.pm_.c:76 msgid "Connection Configuration" msgstr "" #: ../../network/tools.pm_.c:77 msgid "Please fill or check the field below" msgstr "" #: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:607 msgid "Card IRQ" msgstr "" #: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:608 msgid "Card mem (DMA)" msgstr "" #: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:609 msgid "Card IO" msgstr "" #: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:610 msgid "Card IO_0" msgstr "" #: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:611 msgid "Card IO_1" msgstr "" #: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:612 msgid "Your personal phone number" msgstr "" #: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:613 msgid "Provider name (ex provider.net)" msgstr "" #: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:614 msgid "Provider phone number" msgstr "" #: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:615 msgid "Provider dns 1 (optional)" msgstr "" #: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:616 msgid "Provider dns 2 (optional)" msgstr "" #: ../../network/tools.pm_.c:89 msgid "Choose your country" msgstr "" #: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:619 msgid "Dialing mode" msgstr "" #: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:631 msgid "Connection speed" msgstr "" #: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:632 msgid "Connection timeout (in sec)" msgstr "" #: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:617 msgid "Account Login (user name)" msgstr "" #: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:618 msgid "Account Password" msgstr "" #: ../../partition_table.pm_.c:664 msgid "Extended partition not supported on this platform" msgstr "" #: ../../partition_table.pm_.c:682 msgid "" "You have a hole in your partition table but I can't use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions" msgstr "" #: ../../partition_table.pm_.c:770 #, c-format msgid "Restoring from file %s failed: %s" msgstr "" #: ../../partition_table.pm_.c:772 msgid "Bad backup file" msgstr "" #: ../../partition_table.pm_.c:794 #, c-format msgid "Error writing to file %s" msgstr "" #: ../../partition_table_raw.pm_.c:186 msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random trash" msgstr "" #: ../../pkgs.pm_.c:24 msgid "must have" msgstr "" #: ../../pkgs.pm_.c:25 msgid "important" msgstr "" #: ../../pkgs.pm_.c:26 msgid "very nice" msgstr "" #: ../../pkgs.pm_.c:27 msgid "nice" msgstr "" #: ../../pkgs.pm_.c:28 msgid "maybe" msgstr "" #: ../../printer.pm_.c:23 msgid "CUPS - Common Unix Printing System" msgstr "" #: ../../printer.pm_.c:24 msgid "LPRng - LPR New Generation" msgstr "" #: ../../printer.pm_.c:25 msgid "LPD - Line Printer Daemon" msgstr "" #: ../../printer.pm_.c:26 msgid "PDQ - Print, Don't Queue" msgstr "" #: ../../printer.pm_.c:32 ../../printer.pm_.c:864 msgid "CUPS" msgstr "" #: ../../printer.pm_.c:33 msgid "LPRng" msgstr "" #: ../../printer.pm_.c:34 msgid "LPD" msgstr "" #: ../../printer.pm_.c:35 msgid "PDQ" msgstr "" #: ../../printer.pm_.c:40 msgid "Local printer" msgstr "" #: ../../printer.pm_.c:41 msgid "Remote printer" msgstr "" #: ../../printer.pm_.c:42 msgid "Printer on remote CUPS server" msgstr "" #: ../../printer.pm_.c:43 msgid "Printer on remote lpd server" msgstr "" #: ../../printer.pm_.c:44 msgid "Network printer (TCP/Socket)" msgstr "" #: ../../printer.pm_.c:45 msgid "Printer on SMB/Windows 95/98/NT server" msgstr "" #: ../../printer.pm_.c:46 msgid "Printer on NetWare server" msgstr "" #: ../../printer.pm_.c:47 msgid "Enter a printer device URI" msgstr "" #: ../../printer.pm_.c:48 msgid "Pipe job into a command" msgstr "" #: ../../printer.pm_.c:497 ../../printer.pm_.c:688 ../../printer.pm_.c:1010 #: ../../printerdrake.pm_.c:1633 ../../printerdrake.pm_.c:2653 msgid "Unknown model" msgstr "" #: ../../printer.pm_.c:525 msgid "Local Printers" msgstr "" #: ../../printer.pm_.c:527 ../../printer.pm_.c:865 msgid "Remote Printers" msgstr "" #: ../../printer.pm_.c:534 ../../printerdrake.pm_.c:299 #, c-format msgid " on parallel port \\/*%s" msgstr "" #: ../../printer.pm_.c:537 ../../printerdrake.pm_.c:301 #, c-format msgid ", USB printer \\/*%s" msgstr "" #: ../../printer.pm_.c:542 #, c-format msgid ", multi-function device on parallel port \\/*%s" msgstr "" #: ../../printer.pm_.c:545 msgid ", multi-function device on USB" msgstr "" #: ../../printer.pm_.c:547 msgid ", multi-function device on HP JetDirect" msgstr "" #: ../../printer.pm_.c:549 msgid ", multi-function device" msgstr "" #: ../../printer.pm_.c:552 #, c-format msgid ", printing to %s" msgstr "" #: ../../printer.pm_.c:554 #, c-format msgid "on LPD server \"%s\", printer \"%s\"" msgstr "" #: ../../printer.pm_.c:556 #, c-format msgid ", TCP/IP host \"%s\", port %s" msgstr "" #: ../../printer.pm_.c:560 #, c-format msgid "on Windows server \"%s\", share \"%s\"" msgstr "" #: ../../printer.pm_.c:564 #, c-format msgid "on Novell server \"%s\", printer \"%s\"" msgstr "" #: ../../printer.pm_.c:566 #, c-format msgid ", using command %s" msgstr "" #: ../../printer.pm_.c:685 ../../printerdrake.pm_.c:1114 msgid "Raw printer (No driver)" msgstr "" #: ../../printer.pm_.c:834 #, c-format msgid "(on %s)" msgstr "" #: ../../printer.pm_.c:836 msgid "(on this machine)" msgstr "" #: ../../printer.pm_.c:861 #, c-format msgid "On CUPS server \"%s\"" msgstr "" #: ../../printer.pm_.c:867 ../../printerdrake.pm_.c:2332 #: ../../printerdrake.pm_.c:2343 ../../printerdrake.pm_.c:2539 #: ../../printerdrake.pm_.c:2593 ../../printerdrake.pm_.c:2620 #: ../../printerdrake.pm_.c:2769 ../../printerdrake.pm_.c:2771 msgid " (Default)" msgstr "" #: ../../printerdrake.pm_.c:22 msgid "Select Printer Connection" msgstr "" #: ../../printerdrake.pm_.c:23 msgid "How is the printer connected?" msgstr "" #: ../../printerdrake.pm_.c:25 msgid "" "\n" "Printers on remote CUPS servers you do not have to configure here; these " "printers will be automatically detected." msgstr "" #: ../../printerdrake.pm_.c:83 ../../printerdrake.pm_.c:87 #: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:142 msgid "None" msgstr "" #: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:143 msgid "Choose a default printer!" msgstr "" #: ../../printerdrake.pm_.c:104 msgid "" "With remote CUPS servers, you do not have to configure any printer here; " "CUPS servers inform your machine automatically about their printers. All " "printers known to your machine currently are listed in the \"Default printer" "\" field. Choose the default printer for your machine there and click the " "\"Apply/Re-read printers\" button. Click the same button to refresh the list " "(it can take up to 30 seconds after the start of CUPS until all remote " "printers are visible). When your CUPS server is in a different network, you " "have to give the CUPS server IP address and optionally the port number to " "get the printer information from the server, otherwise leave these fields " "blank." msgstr "" #: ../../printerdrake.pm_.c:105 msgid "" "\n" "Normally, CUPS is automatically configured according to your network " "environment, so that you can access the printers on the CUPS servers in your " "local network. If this does not work correctly, turn off \"Automatic CUPS " "configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not " "forget to restart CUPS afterwards (command: \"service cups restart\")." msgstr "" #: ../../printerdrake.pm_.c:107 ../../printerdrake.pm_.c:1706 #: ../../printerdrake.pm_.c:1712 ../../printerdrake.pm_.c:1713 #: ../../printerdrake.pm_.c:1714 ../../printerdrake.pm_.c:2639 #: ../../standalone/drakbackup_.c:753 ../../standalone/drakbackup_.c:2445 #: ../../standalone/drakfont_.c:577 ../../standalone/drakfont_.c:771 msgid "Close" msgstr "" #: ../../printerdrake.pm_.c:108 msgid "Apply/Re-read printers" msgstr "" #: ../../printerdrake.pm_.c:112 msgid "The IP address should look like 192.168.1.20" msgstr "" #: ../../printerdrake.pm_.c:117 ../../printerdrake.pm_.c:861 msgid "The port number should be an integer!" msgstr "" #: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:2730 msgid "Default printer" msgstr "" #: ../../printerdrake.pm_.c:129 msgid "CUPS server IP" msgstr "" #: ../../printerdrake.pm_.c:130 ../../printerdrake.pm_.c:854 msgid "Port" msgstr "" #: ../../printerdrake.pm_.c:132 msgid "Automatic CUPS configuration" msgstr "" #: ../../printerdrake.pm_.c:199 ../../standalone/scannerdrake_.c:42 msgid "Detecting devices ..." msgstr "" #: ../../printerdrake.pm_.c:199 ../../standalone/scannerdrake_.c:42 msgid "Test ports" msgstr "" #: ../../printerdrake.pm_.c:221 ../../printerdrake.pm_.c:2376 #: ../../printerdrake.pm_.c:2481 msgid "Add a new printer" msgstr "" #: ../../printerdrake.pm_.c:222 msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard allows you to install local or remote printers to be used from " "this machine and also from other machines in the network.\n" "\n" "It asks you for all necessary information to set up the printer and gives " "you access to all available printer drivers, driver options, and printer " "connection types." msgstr "" #: ../../printerdrake.pm_.c:230 ../../printerdrake.pm_.c:257 #: ../../printerdrake.pm_.c:426 ../../printerdrake.pm_.c:441 #: ../../printerdrake.pm_.c:451 ../../printerdrake.pm_.c:510 msgid "Local Printer" msgstr "" #: ../../printerdrake.pm_.c:231 msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "Please plug in your printer(s) on this computer and turn it/them on. Click " "on \"Next\" when you are ready, and on \"Cancel\" when you do not want to " "set up your printer(s) now.\n" "\n" "Note that some computers can crash during the printer auto-detection, turn " "off \"Auto-detect printers\" to do a printer installation without auto-" "detection. Use the \"Expert Mode\" of printerdrake when you want to set up " "printing on a remote printer if printerdrake does not list it automatically." msgstr "" #: ../../printerdrake.pm_.c:240 msgid "Auto-detect printers" msgstr "" #: ../../printerdrake.pm_.c:258 msgid "" "\n" "Congratulations, your printer is now installed and configured!\n" "\n" "You can print using the \"Print\" command of your application (usually in " "the \"File\" menu).\n" "\n" "If you want to add, remove, or rename a printer, or if you want to change " "the default option settings (paper input tray, printout quality, ...), " "select \"Printer\" in the \"Hardware\" section of the Mandrake Control " "Center." msgstr "" #: ../../printerdrake.pm_.c:277 msgid "Auto-Detection of Printers" msgstr "" #: ../../printerdrake.pm_.c:278 msgid "" "Printerdrake is able to auto-detect your locally connected parallel and USB " "printers for you, but note that on some systems the auto-detection CAN " "FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON " "YOUR OWN RISK!\n" "\n" "Do you really want to get your printers auto-detected?" msgstr "" #: ../../printerdrake.pm_.c:281 ../../printerdrake.pm_.c:283 #: ../../printerdrake.pm_.c:284 msgid "Do auto-detection" msgstr "" #: ../../printerdrake.pm_.c:282 msgid "Set up printer manually" msgstr "" #: ../../printerdrake.pm_.c:307 #, c-format msgid "Detected %s" msgstr "" #: ../../printerdrake.pm_.c:311 ../../printerdrake.pm_.c:338 #: ../../printerdrake.pm_.c:354 #, c-format msgid "Printer on parallel port \\/*%s" msgstr "" #: ../../printerdrake.pm_.c:313 ../../printerdrake.pm_.c:340 #: ../../printerdrake.pm_.c:359 #, c-format msgid "USB printer \\/*%s" msgstr "" #: ../../printerdrake.pm_.c:427 msgid "" "No local printer found! To manually install a printer enter a device name/" "file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " "equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB " "printer: /dev/usb/lp1, ...)." msgstr "" #: ../../printerdrake.pm_.c:431 msgid "You must enter a device or file name!" msgstr "" #: ../../printerdrake.pm_.c:442 msgid "" "No local printer found!\n" "\n" msgstr "" #: ../../printerdrake.pm_.c:443 msgid "" "Network printers can only be installed after the installation. Choose " "\"Hardware\" and then \"Printer\" in the Mandrake Control Center." msgstr "" #: ../../printerdrake.pm_.c:444 msgid "" "To install network printers, click \"Cancel\", switch to the \"Expert Mode" "\", and click \"Add a new printer\" again." msgstr "" #: ../../printerdrake.pm_.c:455 msgid "" "The following printer was auto-detected, if it is not the one you want to " "configure, enter a device name/file name in the input line" msgstr "" #: ../../printerdrake.pm_.c:456 msgid "" "Here is a list of all auto-detected printers. Please choose the printer you " "want to set up or enter a device name/file name in the input line" msgstr "" #: ../../printerdrake.pm_.c:458 msgid "" "The following printer was auto-detected. The configuration of the printer " "will work fully automatically. If your printer was not correctly detected or " "if you prefer a customized printer configuration, turn on \"Manual " "configuration\"." msgstr "" #: ../../printerdrake.pm_.c:459 msgid "" "Here is a list of all auto-detected printers. Please choose the printer you " "want to set up. The configuration of the printer will work fully " "automatically. If your printer was not correctly detected or if you prefer a " "customized printer configuration, turn on \"Manual configuration\"." msgstr "" #: ../../printerdrake.pm_.c:461 msgid "" "Please choose the port where your printer is connected to or enter a device " "name/file name in the input line" msgstr "" #: ../../printerdrake.pm_.c:462 msgid "Please choose the port where your printer is connected to." msgstr "" #: ../../printerdrake.pm_.c:464 msgid "" " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " "1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" #: ../../printerdrake.pm_.c:469 msgid "You must choose/enter a printer/device!" msgstr "" #: ../../printerdrake.pm_.c:489 msgid "Manual configuration" msgstr "" #: ../../printerdrake.pm_.c:511 msgid "" "Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart " "LaserJet 1100/1200/1220/3200 with scanner)?" msgstr "" #: ../../printerdrake.pm_.c:525 msgid "Installing HPOJ package..." msgstr "" #: ../../printerdrake.pm_.c:530 msgid "Checking device and configuring HPOJ ..." msgstr "" #: ../../printerdrake.pm_.c:548 msgid "Installing SANE package..." msgstr "" #: ../../printerdrake.pm_.c:560 msgid "Scanning on your HP multi-function device" msgstr "" #: ../../printerdrake.pm_.c:577 msgid "Making printer port available for CUPS ..." msgstr "" #: ../../printerdrake.pm_.c:587 ../../printerdrake.pm_.c:1017 #: ../../printerdrake.pm_.c:1110 msgid "Reading printer database ..." msgstr "" #: ../../printerdrake.pm_.c:645 msgid "Remote lpd Printer Options" msgstr "" #: ../../printerdrake.pm_.c:646 msgid "" "To use a remote lpd printer, you need to supply the hostname of the printer " "server and the printer name on that server." msgstr "" #: ../../printerdrake.pm_.c:647 msgid "Remote host name" msgstr "" #: ../../printerdrake.pm_.c:648 msgid "Remote printer name" msgstr "" #: ../../printerdrake.pm_.c:651 msgid "Remote host name missing!" msgstr "" #: ../../printerdrake.pm_.c:655 msgid "Remote printer name missing!" msgstr "" #: ../../printerdrake.pm_.c:723 msgid "SMB (Windows 9x/NT) Printer Options" msgstr "" #: ../../printerdrake.pm_.c:724 msgid "" "To print to a SMB printer, you need to provide the SMB host name (Note! It " "may be different from its TCP/IP hostname!) and possibly the IP address of " "the print server, as well as the share name for the printer you wish to " "access and any applicable user name, password, and workgroup information." msgstr "" #: ../../printerdrake.pm_.c:725 msgid "SMB server host" msgstr "" #: ../../printerdrake.pm_.c:726 msgid "SMB server IP" msgstr "" #: ../../printerdrake.pm_.c:727 msgid "Share name" msgstr "" #: ../../printerdrake.pm_.c:730 msgid "Workgroup" msgstr "" #: ../../printerdrake.pm_.c:737 msgid "Either the server name or the server's IP must be given!" msgstr "" #: ../../printerdrake.pm_.c:741 msgid "Samba share name missing!" msgstr "" #: ../../printerdrake.pm_.c:800 msgid "NetWare Printer Options" msgstr "" #: ../../printerdrake.pm_.c:801 msgid "" "To print on a NetWare printer, you need to provide the NetWare print server " "name (Note! it may be different from its TCP/IP hostname!) as well as the " "print queue name for the printer you wish to access and any applicable user " "name and password." msgstr "" #: ../../printerdrake.pm_.c:802 msgid "Printer Server" msgstr "" #: ../../printerdrake.pm_.c:803 msgid "Print Queue Name" msgstr "" #: ../../printerdrake.pm_.c:808 msgid "NCP server name missing!" msgstr "" #: ../../printerdrake.pm_.c:812 msgid "NCP queue name missing!" msgstr "" #: ../../printerdrake.pm_.c:851 msgid "TCP/Socket Printer Options" msgstr "" #: ../../printerdrake.pm_.c:852 msgid "" "To print to a TCP or socket printer, you need to provide the host name of " "the printer and optionally the port number. On HP JetDirect servers the port " "number is usually 9100, on other servers it can vary. See the manual of your " "hardware." msgstr "" #: ../../printerdrake.pm_.c:853 msgid "Printer host name" msgstr "" #: ../../printerdrake.pm_.c:857 msgid "Printer host name missing!" msgstr "" #: ../../printerdrake.pm_.c:886 ../../printerdrake.pm_.c:888 msgid "Printer Device URI" msgstr "" #: ../../printerdrake.pm_.c:887 msgid "" "You can specify directly the URI to access the printer. The URI must fulfill " "either the CUPS or the Foomatic specifications. Note that not all URI types " "are supported by all the spoolers." msgstr "" #: ../../printerdrake.pm_.c:902 msgid "A valid URI must be entered!" msgstr "" #: ../../printerdrake.pm_.c:1003 msgid "" "Every printer needs a name (for example \"printer\"). The Description and " "Location fields do not need to be filled in. They are comments for the users." msgstr "" #: ../../printerdrake.pm_.c:1004 msgid "Name of printer" msgstr "" #: ../../printerdrake.pm_.c:1005 msgid "Description" msgstr "" #: ../../printerdrake.pm_.c:1006 msgid "Location" msgstr "" #: ../../printerdrake.pm_.c:1020 msgid "Preparing printer database ..." msgstr "" #: ../../printerdrake.pm_.c:1117 msgid "Printer model selection" msgstr "" #: ../../printerdrake.pm_.c:1118 msgid "Which printer model do you have?" msgstr "" #: ../../printerdrake.pm_.c:1119 msgid "" "\n" "\n" "Please check whether Printerdrake did the auto-detection of your printer " "model correctly. Search the correct model in the list when the cursor is " "standing on a wrong model or on \"Raw printer\"." msgstr "" #: ../../printerdrake.pm_.c:1197 msgid "OKI winprinter configuration" msgstr "" #: ../../printerdrake.pm_.c:1198 msgid "" "You are configuring an OKI laser winprinter. These printers\n" "use a very special communication protocol and therefore they work only when " "connected to the first parallel port. When your printer is connected to " "another port or to a print server box please connect the printer to the " "first parallel port before you print a test page. Otherwise the printer will " "not work. Your connection type setting will be ignored by the driver." msgstr "" #: ../../printerdrake.pm_.c:1241 ../../printerdrake.pm_.c:1268 msgid "Lexmark inkjet configuration" msgstr "" #: ../../printerdrake.pm_.c:1242 msgid "" "The inkjet printer drivers provided by Lexmark only support local printers, " "no printers on remote machines or print server boxes. Please connect your " "printer to a local port or configure it on the machine where it is connected " "to." msgstr "" #: ../../printerdrake.pm_.c:1269 msgid "" "To be able to print with your Lexmark inkjet and this configuration, you " "need the inkjet printer drivers provided by Lexmark (http://www.lexmark." "com/). Go to the US site and click on the \"Drivers\" button. Then choose " "your model and afterwards \"Linux\" as operating system. The drivers come as " "RPM packages or shell scripts with interactive graphical installation. You " "do not need to do this configuration by the graphical frontends. Cancel " "directly after the license agreement. Then print printhead alignment pages " "with \"lexmarkmaintain\" and adjust the head alignment settings with this " "program." msgstr "" #: ../../printerdrake.pm_.c:1478 msgid "" "Printer default settings\n" "\n" "You should make sure that the page size and the ink type/printing mode (if " "available) and also the hardware configuration of laser printers (memory, " "duplex unit, extra trays) are set correctly. Note that with a very high " "printout quality/resolution printing can get substantially slower." msgstr "" #: ../../printerdrake.pm_.c:1487 #, c-format msgid "Option %s must be an integer number!" msgstr "" #: ../../printerdrake.pm_.c:1491 #, c-format msgid "Option %s must be a number!" msgstr "" #: ../../printerdrake.pm_.c:1496 #, c-format msgid "Option %s out of range!" msgstr "" #: ../../printerdrake.pm_.c:1533 #, c-format msgid "" "Do you want to set this printer (\"%s\")\n" "as the default printer?" msgstr "" #: ../../printerdrake.pm_.c:1550 msgid "Test pages" msgstr "" #: ../../printerdrake.pm_.c:1551 msgid "" "Please select the test pages you want to print.\n" "Note: the photo test page can take a rather long time to get printed and on " "laser printers with too low memory it can even not come out. In most cases " "it is enough to print the standard test page." msgstr "" #: ../../printerdrake.pm_.c:1555 msgid "No test pages" msgstr "" #: ../../printerdrake.pm_.c:1556 msgid "Print" msgstr "" #: ../../printerdrake.pm_.c:1558 msgid "Standard test page" msgstr "" #: ../../printerdrake.pm_.c:1561 msgid "Alternative test page (Letter)" msgstr "" #: ../../printerdrake.pm_.c:1564 msgid "Alternative test page (A4)" msgstr "" #: ../../printerdrake.pm_.c:1566 msgid "Photo test page" msgstr "" #: ../../printerdrake.pm_.c:1570 msgid "Do not print any test page" msgstr "" #: ../../printerdrake.pm_.c:1578 ../../printerdrake.pm_.c:1715 msgid "Printing test page(s)..." msgstr "" #: ../../printerdrake.pm_.c:1603 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" "Printing status:\n" "%s\n" "\n" msgstr "" #: ../../printerdrake.pm_.c:1607 msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" msgstr "" #: ../../printerdrake.pm_.c:1614 msgid "Did it work properly?" msgstr "" #: ../../printerdrake.pm_.c:1635 ../../printerdrake.pm_.c:2655 msgid "Raw printer" msgstr "" #: ../../printerdrake.pm_.c:1653 #, c-format msgid "" "To print a file from the command line (terminal window) you can either use " "the command \"%s \" or a graphical printing tool: \"xpp \" or " "\"kprinter \". The graphical tools allow you to choose the printer and " "to modify the option settings easily.\n" msgstr "" #: ../../printerdrake.pm_.c:1655 msgid "" "These commands you can also use in the \"Printing command\" field of the " "printing dialogs of many applications, but here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" #: ../../printerdrake.pm_.c:1658 ../../printerdrake.pm_.c:1674 #: ../../printerdrake.pm_.c:1684 #, c-format msgid "" "\n" "The \"%s\" command also allows to modify the option settings for a " "particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \". " msgstr "" #: ../../printerdrake.pm_.c:1661 ../../printerdrake.pm_.c:1700 #, c-format msgid "" "To know about the options available for the current printer read either the " "list shown below or click on the \"Print option list\" button.%s\n" "\n" msgstr "" #: ../../printerdrake.pm_.c:1664 msgid "" "Here is a list of the available printing options for the current printer:\n" "\n" msgstr "" #: ../../printerdrake.pm_.c:1669 ../../printerdrake.pm_.c:1679 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\".\n" msgstr "" #: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1681 #: ../../printerdrake.pm_.c:1691 msgid "" "This command you can also use in the \"Printing command\" field of the " "printing dialogs of many applications. But here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" #: ../../printerdrake.pm_.c:1676 ../../printerdrake.pm_.c:1686 msgid "" "To get a list of the options available for the current printer click on the " "\"Print option list\" button." msgstr "" #: ../../printerdrake.pm_.c:1689 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\" or \"%s \".\n" msgstr "" #: ../../printerdrake.pm_.c:1693 msgid "" "You can also use the graphical interface \"xpdq\" for setting options and " "handling printing jobs.\n" "If you are using KDE as desktop environment you have a \"panic button\", an " "icon on the desktop, labeled with \"STOP Printer!\", which stops all print " "jobs immediately when you click it. This is for example useful for paper " "jams.\n" msgstr "" #: ../../printerdrake.pm_.c:1697 #, c-format msgid "" "\n" "The \"%s\" and \"%s\" commands also allow to modify the option settings for " "a particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \".\n" msgstr "" #: ../../printerdrake.pm_.c:1709 ../../printerdrake.pm_.c:1721 #, c-format msgid "Printing/Scanning on \"%s\"" msgstr "" #: ../../printerdrake.pm_.c:1710 ../../printerdrake.pm_.c:1722 #, c-format msgid "Printing on the printer \"%s\"" msgstr "" #: ../../printerdrake.pm_.c:1712 msgid "Print option list" msgstr "" #: ../../printerdrake.pm_.c:1734 #, c-format msgid "" "Your HP multi-function device was configured automatically to be able to " "scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify " "the scanner when you have more than one) from the command line or with the " "graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, " "you can also scan by choosing the appropriate point in the \"File\"/\"Acquire" "\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line " "to get more information.\n" "\n" "Do not use \"scannerdrake\" for this device!" msgstr "" #: ../../printerdrake.pm_.c:1740 #, c-format msgid "" "Your HP multi-function device was configured automatically to be able to " "scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". " "Scanning via a graphical interface or from the GIMP is not supported yet for " "your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/" "ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or " "1200 you can only scan when you have the scanner option installed.\n" "\n" "Do not use \"scannerdrake\" for this device!" msgstr "" #: ../../printerdrake.pm_.c:1762 ../../printerdrake.pm_.c:2169 #: ../../printerdrake.pm_.c:2415 ../../standalone/printerdrake_.c:49 msgid "Reading printer data ..." msgstr "" #: ../../printerdrake.pm_.c:1782 ../../printerdrake.pm_.c:1810 #: ../../printerdrake.pm_.c:1845 msgid "Transfer printer configuration" msgstr "" #: ../../printerdrake.pm_.c:1783 #, c-format msgid "" "You can copy the printer configuration which you have done for the spooler %" "s to %s, your current spooler. All the configuration data (printer name, " "description, location, connection type, and default option settings) is " "overtaken, but jobs will not be transferred.\n" "Not all queues can be transferred due to the following reasons:\n" msgstr "" #: ../../printerdrake.pm_.c:1786 msgid "" "CUPS does not support printers on Novell servers or printers sending the " "data into a free-formed command.\n" msgstr "" #: ../../printerdrake.pm_.c:1788 msgid "" "PDQ only supports local printers, remote LPD printers, and Socket/TCP " "printers.\n" msgstr "" #: ../../printerdrake.pm_.c:1790 msgid "LPD and LPRng do not support IPP printers.\n" msgstr "" #: ../../printerdrake.pm_.c:1792 msgid "" "In addition, queues not created with this program or \"foomatic-configure\" " "cannot be transferred." msgstr "" #: ../../printerdrake.pm_.c:1793 msgid "" "\n" "Also printers configured with the PPD files provided by their manufacturers " "or with native CUPS drivers cannot be transferred." msgstr "" #: ../../printerdrake.pm_.c:1794 msgid "" "\n" "Mark the printers which you want to transfer and click \n" "\"Transfer\"." msgstr "" #: ../../printerdrake.pm_.c:1797 msgid "Do not transfer printers" msgstr "" #: ../../printerdrake.pm_.c:1798 ../../printerdrake.pm_.c:1815 msgid "Transfer" msgstr "" #: ../../printerdrake.pm_.c:1811 #, c-format msgid "" "A printer named \"%s\" already exists under %s. \n" "Click \"Transfer\" to overwrite it.\n" "You can also type a new name or skip this printer." msgstr "" #: ../../printerdrake.pm_.c:1819 msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "" #: ../../printerdrake.pm_.c:1824 #, c-format msgid "" "The printer \"%s\" already exists,\n" "do you really want to overwrite its configuration?" msgstr "" #: ../../printerdrake.pm_.c:1832 msgid "New printer name" msgstr "" #: ../../printerdrake.pm_.c:1835 #, c-format msgid "Transferring %s ..." msgstr "" #: ../../printerdrake.pm_.c:1846 #, c-format msgid "" "You have transferred your former default printer (\"%s\"), Should it be also " "the default printer under the new printing system %s?" msgstr "" #: ../../printerdrake.pm_.c:1855 msgid "Refreshing printer data ..." msgstr "" #: ../../printerdrake.pm_.c:1863 ../../printerdrake.pm_.c:1926 #: ../../printerdrake.pm_.c:1938 msgid "Configuration of a remote printer" msgstr "" #: ../../printerdrake.pm_.c:1864 msgid "Starting network ..." msgstr "" #: ../../printerdrake.pm_.c:1890 ../../printerdrake.pm_.c:1894 #: ../../printerdrake.pm_.c:1896 msgid "Configure the network now" msgstr "" #: ../../printerdrake.pm_.c:1891 msgid "Network functionality not configured" msgstr "" #: ../../printerdrake.pm_.c:1892 msgid "" "You are going to configure a remote printer. This needs working network " "access, but your network is not configured yet. If you go on without network " "configuration, you will not be able to use the printer which you are " "configuring now. How do you want to proceed?" msgstr "" #: ../../printerdrake.pm_.c:1895 msgid "Go on without configuring the network" msgstr "" #: ../../printerdrake.pm_.c:1928 msgid "" "The network configuration done during the installation cannot be started " "now. Please check whether the network gets accessable after booting your " "system and correct the configuration using the Mandrake Control Center, " "section \"Network & Internet\"/\"Connection\", and afterwards set up the " "printer, also using the Mandrake Control Center, section \"Hardware\"/" "\"Printer\"" msgstr "" #: ../../printerdrake.pm_.c:1929 msgid "" "The network access was not running and could not be started. Please check " "your configuration and your hardware. Then try to configure your remote " "printer again." msgstr "" #: ../../printerdrake.pm_.c:1939 msgid "Restarting printing system ..." msgstr "" #: ../../printerdrake.pm_.c:1977 msgid "high" msgstr "" #: ../../printerdrake.pm_.c:1977 msgid "paranoid" msgstr "" #: ../../printerdrake.pm_.c:1978 #, c-format msgid "Installing a printing system in the %s security level" msgstr "" #: ../../printerdrake.pm_.c:1979 #, c-format msgid "" "You are about to install the printing system %s on a system running in the %" "s security level.\n" "\n" "This printing system runs a daemon (background process) which waits for " "print jobs and handles them. This daemon is also accessable by remote " "machines through the network and so it is a possible point for attacks. " "Therefore only a few selected daemons are started by default in this " "security level.\n" "\n" "Do you really want to configure printing on this machine?" msgstr "" #: ../../printerdrake.pm_.c:2011 msgid "Starting the printing system at boot time" msgstr "" #: ../../printerdrake.pm_.c:2012 #, c-format msgid "" "The printing system (%s) will not be started automatically when the machine " "is booted.\n" "\n" "It is possible that the automatic starting was turned off by changing to a " "higher security level, because the printing system is a potential point for " "attacks.\n" "\n" "Do you want to have the automatic starting of the printing system turned on " "again?" msgstr "" #: ../../printerdrake.pm_.c:2035 ../../printerdrake.pm_.c:2063 #: ../../printerdrake.pm_.c:2093 ../../printerdrake.pm_.c:2126 #: ../../printerdrake.pm_.c:2229 msgid "Checking installed software..." msgstr "" #: ../../printerdrake.pm_.c:2067 msgid "Removing LPRng..." msgstr "" #: ../../printerdrake.pm_.c:2097 msgid "Removing LPD..." msgstr "" #: ../../printerdrake.pm_.c:2155 msgid "Select Printer Spooler" msgstr "" #: ../../printerdrake.pm_.c:2156 msgid "Which printing system (spooler) do you want to use?" msgstr "" #: ../../printerdrake.pm_.c:2187 #, c-format msgid "Configuring printer \"%s\" ..." msgstr "" #: ../../printerdrake.pm_.c:2200 msgid "Installing Foomatic ..." msgstr "" #: ../../printerdrake.pm_.c:2257 ../../printerdrake.pm_.c:2289 #: ../../printerdrake.pm_.c:2656 ../../printerdrake.pm_.c:2723 msgid "Printer options" msgstr "" #: ../../printerdrake.pm_.c:2266 msgid "Preparing PrinterDrake ..." msgstr "" #: ../../printerdrake.pm_.c:2296 msgid "Would you like to configure printing?" msgstr "" #: ../../printerdrake.pm_.c:2308 msgid "Printing system: " msgstr "" #: ../../printerdrake.pm_.c:2356 msgid "Printerdrake" msgstr "" #: ../../printerdrake.pm_.c:2359 msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; or to view information about " "it." msgstr "" #: ../../printerdrake.pm_.c:2385 msgid "Refresh printer list (to display all available remote CUPS printers)" msgstr "" #: ../../printerdrake.pm_.c:2394 msgid "Configure printing system" msgstr "" #: ../../printerdrake.pm_.c:2399 ../../standalone/draknet_.c:278 msgid "Normal Mode" msgstr "" #: ../../printerdrake.pm_.c:2503 ../../printerdrake.pm_.c:2546 #: ../../printerdrake.pm_.c:2563 ../../printerdrake.pm_.c:2598 #: ../../printerdrake.pm_.c:2786 msgid "Do you want to configure another printer?" msgstr "" #: ../../printerdrake.pm_.c:2634 msgid "Modify printer configuration" msgstr "" #: ../../printerdrake.pm_.c:2636 #, c-format msgid "" "Printer %s\n" "What do you want to modify on this printer?" msgstr "" #: ../../printerdrake.pm_.c:2640 msgid "Do it!" msgstr "" #: ../../printerdrake.pm_.c:2645 ../../printerdrake.pm_.c:2697 msgid "Printer connection type" msgstr "" #: ../../printerdrake.pm_.c:2646 ../../printerdrake.pm_.c:2701 msgid "Printer name, description, location" msgstr "" #: ../../printerdrake.pm_.c:2648 ../../printerdrake.pm_.c:2716 msgid "Printer manufacturer, model, driver" msgstr "" #: ../../printerdrake.pm_.c:2649 ../../printerdrake.pm_.c:2717 msgid "Printer manufacturer, model" msgstr "" #: ../../printerdrake.pm_.c:2658 ../../printerdrake.pm_.c:2727 msgid "Set this printer as the default" msgstr "" #: ../../printerdrake.pm_.c:2659 ../../printerdrake.pm_.c:2732 msgid "Print test pages" msgstr "" #: ../../printerdrake.pm_.c:2660 ../../printerdrake.pm_.c:2734 msgid "Know how to use this printer" msgstr "" #: ../../printerdrake.pm_.c:2662 ../../printerdrake.pm_.c:2736 msgid "Remove printer" msgstr "" #: ../../printerdrake.pm_.c:2706 #, c-format msgid "Removing old printer \"%s\" ..." msgstr "" #: ../../printerdrake.pm_.c:2731 #, c-format msgid "The printer \"%s\" is set as the default printer now." msgstr "" #: ../../printerdrake.pm_.c:2738 #, c-format msgid "Do you really want to remove the printer \"%s\"?" msgstr "" #: ../../printerdrake.pm_.c:2740 #, c-format msgid "Removing printer \"%s\" ..." msgstr "" #: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58 #: ../../proxy.pm_.c:78 msgid "Proxy configuration" msgstr "" #: ../../proxy.pm_.c:30 msgid "" "Welcome to the proxy configuration utility.\n" "\n" "Here, you'll be able to set up your http and ftp proxies\n" "with or without login and password\n" msgstr "" #: ../../proxy.pm_.c:38 msgid "" "Please fill in the http proxy informations\n" "Leave it blank if you don't want an http proxy" msgstr "" #: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60 msgid "URL" msgstr "" #: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61 msgid "port" msgstr "" #: ../../proxy.pm_.c:44 msgid "Url should begin with 'http:'" msgstr "" #: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69 msgid "The port part should be numeric" msgstr "" #: ../../proxy.pm_.c:59 msgid "" "Please fill in the ftp proxy informations\n" "Leave it blank if you don't want an ftp proxy" msgstr "" #: ../../proxy.pm_.c:65 msgid "Url should begin with 'ftp:'" msgstr "" #: ../../proxy.pm_.c:79 msgid "" "Please enter proxy login and password, if any.\n" "Leave it blank if you don't want login/passwd" msgstr "" #: ../../proxy.pm_.c:80 msgid "login" msgstr "" #: ../../proxy.pm_.c:82 msgid "password" msgstr "" #: ../../proxy.pm_.c:84 msgid "re-type password" msgstr "" #: ../../proxy.pm_.c:88 msgid "The passwords don't match. Try again!" msgstr "" #: ../../raid.pm_.c:35 #, c-format msgid "Can't add a partition to _formatted_ RAID md%d" msgstr "" #: ../../raid.pm_.c:111 #, c-format msgid "Can't write file %s" msgstr "" #: ../../raid.pm_.c:136 msgid "mkraid failed" msgstr "" #: ../../raid.pm_.c:136 msgid "mkraid failed (maybe raidtools are missing?)" msgstr "" #: ../../raid.pm_.c:152 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "" #: ../../services.pm_.c:14 msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "" #: ../../services.pm_.c:15 msgid "Anacron a periodic command scheduler." msgstr "" #: ../../services.pm_.c:16 msgid "" "apmd is used for monitoring batery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" #: ../../services.pm_.c:18 msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" #: ../../services.pm_.c:20 msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" #: ../../services.pm_.c:23 msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" #: ../../services.pm_.c:26 msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "" #: ../../services.pm_.c:28 ../../standalone/logdrake_.c:403 msgid "" "Apache is a World Wide Web server. It is used to serve HTML files and CGI." msgstr "" #: ../../services.pm_.c:29 msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" #: ../../services.pm_.c:33 msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" #: ../../services.pm_.c:35 msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" #: ../../services.pm_.c:38 msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" #: ../../services.pm_.c:40 msgid "Automatic detection and configuration of hardware at boot." msgstr "" #: ../../services.pm_.c:41 msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "" #: ../../services.pm_.c:43 msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" #: ../../services.pm_.c:45 msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "" #: ../../services.pm_.c:47 ../../standalone/logdrake_.c:404 msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve host " "names to IP addresses." msgstr "" #: ../../services.pm_.c:48 msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" #: ../../services.pm_.c:50 msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" #: ../../services.pm_.c:52 msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" #: ../../services.pm_.c:55 msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" #: ../../services.pm_.c:57 msgid "" "Automatically switch on numlock key locker under console\n" "and XFree at boot." msgstr "" #: ../../services.pm_.c:59 msgid "Support the OKI 4w and compatible winprinters." msgstr "" #: ../../services.pm_.c:60 msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It won't get started unless configured so it is safe to " "have\n" "it installed on machines that don't need it." msgstr "" #: ../../services.pm_.c:63 msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" #: ../../services.pm_.c:66 ../../standalone/logdrake_.c:406 msgid "" "Postfix is a Mail Transport Agent, which is the program that moves mail from " "one machine to another." msgstr "" #: ../../services.pm_.c:67 msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" #: ../../services.pm_.c:69 msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle" msgstr "" #: ../../services.pm_.c:71 msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" #: ../../services.pm_.c:74 msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" #: ../../services.pm_.c:76 msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" #: ../../services.pm_.c:78 msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similiar to finger)." msgstr "" #: ../../services.pm_.c:80 msgid "Launch the sound system on your machine" msgstr "" #: ../../services.pm_.c:81 msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" #: ../../services.pm_.c:83 msgid "Load the drivers for your usb devices." msgstr "" #: ../../services.pm_.c:84 msgid "Starts the X Font Server (this is mandatory for XFree to run)." msgstr "" #: ../../services.pm_.c:110 ../../services.pm_.c:152 msgid "Choose which services should be automatically started at boot time" msgstr "" #: ../../services.pm_.c:122 msgid "Printing" msgstr "" #: ../../services.pm_.c:123 msgid "Internet" msgstr "" #: ../../services.pm_.c:126 msgid "File sharing" msgstr "" #: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:933 msgid "System" msgstr "" #: ../../services.pm_.c:133 msgid "Remote Administration" msgstr "" #: ../../services.pm_.c:141 msgid "Database Server" msgstr "" #: ../../services.pm_.c:170 #, c-format msgid "Services: %d activated for %d registered" msgstr "" #: ../../services.pm_.c:186 msgid "Services" msgstr "" #: ../../services.pm_.c:198 msgid "running" msgstr "" #: ../../services.pm_.c:198 msgid "stopped" msgstr "" #: ../../services.pm_.c:212 msgid "Services and deamons" msgstr "" #: ../../services.pm_.c:217 msgid "" "No additional information\n" "about this service, sorry." msgstr "" #: ../../services.pm_.c:224 msgid "On boot" msgstr "" #: ../../services.pm_.c:236 msgid "Start" msgstr "" #: ../../services.pm_.c:236 msgid "Stop" msgstr "" #: ../../share/advertising/00-thanks.pl_.c:9 msgid "Thank you for choosing Mandrake Linux 8.2" msgstr "" #: ../../share/advertising/00-thanks.pl_.c:10 msgid "Welcome to the Open Source world" msgstr "" #: ../../share/advertising/00-thanks.pl_.c:11 msgid "" "The success of MandrakeSoft is based upon the principle of Free Software. " "Your new operating system is the result of collaborative work on the part of " "the worldwide Linux Community" msgstr "" #: ../../share/advertising/01-gnu.pl_.c:9 msgid "Join the Free Software world" msgstr "" #: ../../share/advertising/01-gnu.pl_.c:10 msgid "" "Want to get to know the Open Source community? Be a part? To share your " "knowledge, and help build tools, join the discussion forums you'll find on " "our \"Community\" webpages" msgstr "" #: ../../share/advertising/02-internet.pl_.c:9 msgid "Internet and Messaging" msgstr "" #: ../../share/advertising/02-internet.pl_.c:10 msgid "" "Mandrake Linux 8.2 gives you the best choice of software to access all the " "Internet has to offer. Surf the web and view animations with Mozilla and " "Konqueror, read your mail and handle your personal information with " "Evolution and Kmail" msgstr "" #: ../../share/advertising/03-graphic.pl_.c:9 msgid "Art and Multimedia" msgstr "" #: ../../share/advertising/03-graphic.pl_.c:10 msgid "" "Mandrake Linux 8.2 will let you push your multimedia computer to its limits! " "Use the very latest software to play audio files, edit and handle your " "images or photos, and play videos" msgstr "" #: ../../share/advertising/04-develop.pl_.c:9 msgid "Development" msgstr "" #: ../../share/advertising/04-develop.pl_.c:10 msgid "" "Mandrake Linux 8.2 is the ultimate development platform. Use the full power " "of the GNU gcc compiler as well as the best Open Source development " "environments" msgstr "" #: ../../share/advertising/05-contcenter.pl_.c:9 msgid "Mandrake Control Center" msgstr "" #: ../../share/advertising/05-contcenter.pl_.c:10 msgid "" "Mandrake Linux 8.2 provides a powerful tool to fully customize and configure " "your machine" msgstr "" #: ../../share/advertising/06-user.pl_.c:9 msgid "User interfaces" msgstr "" #: ../../share/advertising/06-user.pl_.c:10 msgid "" "A total of 11 different user interfaces are provided, including GNOME 1.4, " "KDE 2.2.2, Window Maker, ..." msgstr "" #: ../../share/advertising/07-server.pl_.c:9 msgid "Server Software" msgstr "" #: ../../share/advertising/07-server.pl_.c:10 msgid "" "Transform your machine into a powerful server in a few clicks of your mouse: " "Web server, mail, firewall, router, file and print server, ..." msgstr "" #: ../../share/advertising/08-games.pl_.c:9 msgid "Games" msgstr "" #: ../../share/advertising/08-games.pl_.c:10 msgid "" "Mandrake Linux 8.2 provides the best in Open Source games - arcade, action, " "strategy, ..." msgstr "" #: ../../share/advertising/09-MDKcampus.pl_.c:9 msgid "MandrakeCampus" msgstr "" #: ../../share/advertising/09-MDKcampus.pl_.c:10 msgid "" "Want to learn Linux in a simple, quick, and most of all free way? We provide " "free training on Linux, as well as a way to test your progress, via our " "online training center MandrakeCampus" msgstr "" #: ../../share/advertising/10-MDKexpert.pl_.c:9 msgid "MandrakeExpert" msgstr "" #: ../../share/advertising/10-MDKexpert.pl_.c:10 msgid "" "Quality support from the Linux Community, and from MandrakeSoft, is just " "around the corner! Be an Expert, and you can share your knowledge and help " "others at our support website" msgstr "" #: ../../share/advertising/11-consul.pl_.c:9 msgid "MandrakeConsulting" msgstr "" #: ../../share/advertising/11-consul.pl_.c:10 msgid "" "For all your IT projects, our consultants are there to understand your needs " "and offer solutions meeting your requirements. MandrakeSoft, from its strong " "experience as an editor, brings a true IT alternative" msgstr "" #: ../../share/advertising/12-MDKstore.pl_.c:9 msgid "MandrakeStore" msgstr "" #: ../../share/advertising/12-MDKstore.pl_.c:10 msgid "" "Our full range of Linux solutions, as well as special offers on our products " "and other 'goodies', is available on our e-store" msgstr "" #: ../../share/advertising/13-Nvert.pl_.c:9 msgid "" "To access to more commercial informations, please contact us on the " "following toll free:" msgstr "" #: ../../share/advertising/13-Nvert.pl_.c:11 msgid "http://www.mandrakesoft.com/sales/contact" msgstr "" #: ../../standalone.pm_.c:25 msgid "Installing packages..." msgstr "" #: ../../standalone/diskdrake_.c:85 msgid "" "I can't read your partition table, it's too corrupted for me :(\n" "I'll try to go on blanking bad partitions" msgstr "" #: ../../standalone/drakautoinst_.c:45 msgid "Error!" msgstr "" #: ../../standalone/drakautoinst_.c:46 #, c-format msgid "I can't find needed image file `%s'." msgstr "" #: ../../standalone/drakautoinst_.c:48 msgid "Auto Install Configurator" msgstr "" #: ../../standalone/drakautoinst_.c:49 msgid "" "You are about to configure an Auto Install floppy. This feature is somewhat " "dangerous and must be used circumspectly.\n" "\n" "With that feature, you will be able to replay the installation you've " "performed on this computer, being interactively prompted for some steps, in " "order to change their values.\n" "\n" "For maximum safety, the partitioning and formatting will never be performed " "automatically, whatever you chose during the install of this computer.\n" "\n" "Do you want to continue?" msgstr "" #: ../../standalone/drakautoinst_.c:71 msgid "Automatic Steps Configuration" msgstr "" #: ../../standalone/drakautoinst_.c:72 msgid "" "Please choose for each step whether it will replay like your install, or it " "will be manual" msgstr "" #: ../../standalone/drakautoinst_.c:145 msgid "" "\n" "Welcome.\n" "\n" "The parameters of the auto-install are available in the sections on the left" msgstr "" #: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:662 msgid "Congratulations!" msgstr "" #: ../../standalone/drakautoinst_.c:244 msgid "" "The floppy has been successfully generated.\n" "You may now replay your installation." msgstr "" #: ../../standalone/drakautoinst_.c:282 msgid "Auto Install" msgstr "" #: ../../standalone/drakautoinst_.c:344 msgid "Add an item" msgstr "" #: ../../standalone/drakautoinst_.c:351 msgid "Remove the last item" msgstr "" #: ../../standalone/drakbackup_.c:447 ../../standalone/drakbackup_.c:450 #: ../../standalone/drakbackup_.c:454 msgid "" "***********************************************************************\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:448 msgid "" "\n" " DrakBackup Report \n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:449 msgid "" "\n" " DrakBackup Daemon Report\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:452 msgid "" "\n" "\n" "***********************************************************************\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:453 msgid "" "\n" " DrakBackup Report Details\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:475 msgid "total progess" msgstr "" #: ../../standalone/drakbackup_.c:554 ../../standalone/drakbackup_.c:601 msgid "Backup system files..." msgstr "" #: ../../standalone/drakbackup_.c:602 ../../standalone/drakbackup_.c:666 msgid "Hard Disk Backup files..." msgstr "" #: ../../standalone/drakbackup_.c:614 msgid "Backup User files..." msgstr "" #: ../../standalone/drakbackup_.c:615 msgid "Hard Disk Backup Progress..." msgstr "" #: ../../standalone/drakbackup_.c:665 msgid "Backup Other files..." msgstr "" #: ../../standalone/drakbackup_.c:673 #, c-format msgid "" "file list send by FTP : %s\n" " " msgstr "" #: ../../standalone/drakbackup_.c:676 msgid "" "\n" "(!) FTP connexion problem: It was not possible to send your backup files by " "FTP.\n" msgstr "" #: ../../standalone/drakbackup_.c:686 msgid "(!) Error during mail sending. \n" msgstr "" #: ../../standalone/drakbackup_.c:727 ../../standalone/drakbackup_.c:738 #: ../../standalone/drakbackup_.c:749 ../../standalone/drakfont_.c:767 msgid "File Selection" msgstr "" #: ../../standalone/drakbackup_.c:754 msgid "Select the files or directories and click on 'Add'" msgstr "" #: ../../standalone/drakbackup_.c:789 msgid "" "\n" "Please check all options that you need.\n" msgstr "" #: ../../standalone/drakbackup_.c:790 msgid "" "These options can backup and restore all files in your /etc directory.\n" msgstr "" #: ../../standalone/drakbackup_.c:791 msgid "Backup your System files. ( /etc directory )" msgstr "" #: ../../standalone/drakbackup_.c:792 msgid "Use incremental backup (do not replace old backups)" msgstr "" #: ../../standalone/drakbackup_.c:793 msgid "Do not include critical files (passwd, group, fstab)" msgstr "" #: ../../standalone/drakbackup_.c:794 msgid "" "With this option you will be able to restore any version\n" " of your /etc directory." msgstr "" #: ../../standalone/drakbackup_.c:811 msgid "Please check all users that you want to include in your backup." msgstr "" #: ../../standalone/drakbackup_.c:838 msgid "Do not include the browser cache" msgstr "" #: ../../standalone/drakbackup_.c:839 ../../standalone/drakbackup_.c:863 msgid "Use Incremental Backups (do not replace old backups)" msgstr "" #: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:807 msgid "Remove Selected" msgstr "" #: ../../standalone/drakbackup_.c:899 msgid "Windows (FAT32)" msgstr "" #: ../../standalone/drakbackup_.c:938 msgid "Users" msgstr "" #: ../../standalone/drakbackup_.c:963 msgid "Use FTP connection to backup" msgstr "" #: ../../standalone/drakbackup_.c:966 msgid "Please enter the host name or IP." msgstr "" #: ../../standalone/drakbackup_.c:971 msgid "" "Please enter the directory to\n" " put the backup on this host." msgstr "" #: ../../standalone/drakbackup_.c:976 msgid "Please enter your login" msgstr "" #: ../../standalone/drakbackup_.c:981 msgid "Please enter your password" msgstr "" #: ../../standalone/drakbackup_.c:987 msgid "Remember this password" msgstr "" #: ../../standalone/drakbackup_.c:1051 ../../standalone/drakbackup_.c:2035 msgid "FTP Connection" msgstr "" #: ../../standalone/drakbackup_.c:1058 ../../standalone/drakbackup_.c:2043 msgid "Secure Connection" msgstr "" #: ../../standalone/drakbackup_.c:1084 ../../standalone/drakbackup_.c:2876 msgid "Use CD/DVDROM to backup" msgstr "" #: ../../standalone/drakbackup_.c:1087 ../../standalone/drakbackup_.c:2880 msgid "Please choose your CD space" msgstr "" #: ../../standalone/drakbackup_.c:1093 ../../standalone/drakbackup_.c:2892 msgid "Please check if you are using CDRW media" msgstr "" #: ../../standalone/drakbackup_.c:1099 ../../standalone/drakbackup_.c:2898 msgid "Please check if you want to erase your CDRW before" msgstr "" #: ../../standalone/drakbackup_.c:1105 msgid "" "Please check if you want to include\n" " install boot on your CD." msgstr "" #: ../../standalone/drakbackup_.c:1111 msgid "" "Please enter your CD Writer device name\n" " ex: 0,1,0" msgstr "" #: ../../standalone/drakbackup_.c:1152 msgid "Use tape to backup" msgstr "" #: ../../standalone/drakbackup_.c:1155 msgid "Please enter the device name to use for backup" msgstr "" #: ../../standalone/drakbackup_.c:1161 ../../standalone/drakbackup_.c:1202 #: ../../standalone/drakbackup_.c:2000 msgid "" "Please enter the maximum size\n" " allowed for Drakbackup" msgstr "" #: ../../standalone/drakbackup_.c:1194 ../../standalone/drakbackup_.c:1992 msgid "Please enter the directory to save:" msgstr "" #: ../../standalone/drakbackup_.c:1208 ../../standalone/drakbackup_.c:2006 msgid "Use quota for backup files." msgstr "" #: ../../standalone/drakbackup_.c:1266 msgid "Network" msgstr "" #: ../../standalone/drakbackup_.c:1271 msgid "CDROM / DVDROM" msgstr "" #: ../../standalone/drakbackup_.c:1276 msgid "HardDrive / NFS" msgstr "" #: ../../standalone/drakbackup_.c:1296 msgid "daily" msgstr "" #: ../../standalone/drakbackup_.c:1296 msgid "hourly" msgstr "" #: ../../standalone/drakbackup_.c:1296 msgid "monthly" msgstr "" #: ../../standalone/drakbackup_.c:1296 msgid "weekly" msgstr "" #: ../../standalone/drakbackup_.c:1303 msgid "Use daemon" msgstr "" #: ../../standalone/drakbackup_.c:1308 msgid "" "Please choose the time \n" "interval between each backup" msgstr "" #: ../../standalone/drakbackup_.c:1314 msgid "" "Please choose the\n" "media for backup." msgstr "" #: ../../standalone/drakbackup_.c:1318 msgid "Use Hard Drive with daemon" msgstr "" #: ../../standalone/drakbackup_.c:1320 msgid "Use FTP with daemon" msgstr "" #: ../../standalone/drakbackup_.c:1324 msgid "Please be sure that the cron daemon is included in your services." msgstr "" #: ../../standalone/drakbackup_.c:1360 msgid "Send mail report after each backup to :" msgstr "" #: ../../standalone/drakbackup_.c:1402 msgid "What" msgstr "" #: ../../standalone/drakbackup_.c:1407 msgid "Where" msgstr "" #: ../../standalone/drakbackup_.c:1412 msgid "When" msgstr "" #: ../../standalone/drakbackup_.c:1417 msgid "More Options" msgstr "" #: ../../standalone/drakbackup_.c:1436 ../../standalone/drakbackup_.c:2788 msgid "Drakbackup Configuration" msgstr "" #: ../../standalone/drakbackup_.c:1454 msgid "Please choose where you want to backup" msgstr "" #: ../../standalone/drakbackup_.c:1456 msgid "on Hard Drive" msgstr "" #: ../../standalone/drakbackup_.c:1465 msgid "across Network" msgstr "" #: ../../standalone/drakbackup_.c:1527 msgid "Please choose what you want to backup" msgstr "" #: ../../standalone/drakbackup_.c:1528 msgid "Backup system" msgstr "" #: ../../standalone/drakbackup_.c:1529 msgid "Backup Users" msgstr "" #: ../../standalone/drakbackup_.c:1532 msgid "Select user manually" msgstr "" #: ../../standalone/drakbackup_.c:1614 msgid "" "\n" "Backup Sources: \n" msgstr "" #: ../../standalone/drakbackup_.c:1615 msgid "" "\n" "- System Files:\n" msgstr "" #: ../../standalone/drakbackup_.c:1617 msgid "" "\n" "- User Files:\n" msgstr "" #: ../../standalone/drakbackup_.c:1619 msgid "" "\n" "- Other Files:\n" msgstr "" #: ../../standalone/drakbackup_.c:1621 #, c-format msgid "" "\n" "- Save on Hard drive on path : %s\n" msgstr "" #: ../../standalone/drakbackup_.c:1622 #, c-format msgid "" "\n" "- Save on FTP on host : %s\n" msgstr "" #: ../../standalone/drakbackup_.c:1623 #, c-format msgid "" "\t\t user name: %s\n" "\t\t on path: %s \n" msgstr "" #: ../../standalone/drakbackup_.c:1624 msgid "" "\n" "- Options:\n" msgstr "" #: ../../standalone/drakbackup_.c:1625 msgid "\tDo not include System Files\n" msgstr "" #: ../../standalone/drakbackup_.c:1626 msgid "\tBackups use tar and bzip2\n" msgstr "" #: ../../standalone/drakbackup_.c:1627 msgid "\tBackups use tar and gzip\n" msgstr "" #: ../../standalone/drakbackup_.c:1628 #, c-format msgid "" "\n" "- Daemon (%s) include :\n" msgstr "" #: ../../standalone/drakbackup_.c:1629 msgid "\t-Hard drive.\n" msgstr "" #: ../../standalone/drakbackup_.c:1630 msgid "\t-CDROM.\n" msgstr "" #: ../../standalone/drakbackup_.c:1631 msgid "\t-Network by FTP.\n" msgstr "" #: ../../standalone/drakbackup_.c:1632 msgid "\t-Network by SSH.\n" msgstr "" #: ../../standalone/drakbackup_.c:1634 msgid "No configuration, please click Wizard or Advanced.\n" msgstr "" #: ../../standalone/drakbackup_.c:1639 msgid "" "List of data to restore:\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:1740 msgid "" "List of data corrupted:\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:1742 msgid "Please uncheck or remove it on next time." msgstr "" #: ../../standalone/drakbackup_.c:1752 msgid "Backup files are corrupted" msgstr "" #: ../../standalone/drakbackup_.c:1773 msgid " All your selectionned data have been " msgstr "" #: ../../standalone/drakbackup_.c:1774 #, c-format msgid " Successfuly Restored on %s " msgstr "" #: ../../standalone/drakbackup_.c:1873 msgid " Restore Configuration " msgstr "" #: ../../standalone/drakbackup_.c:1891 msgid "OK to restore the other files." msgstr "" #: ../../standalone/drakbackup_.c:1909 msgid "User list to restore (only the most recent date per user is important)" msgstr "" #: ../../standalone/drakbackup_.c:1959 msgid "Backup the system files before:" msgstr "" #: ../../standalone/drakbackup_.c:1961 msgid "please choose the date to restore" msgstr "" #: ../../standalone/drakbackup_.c:1989 msgid "Use Hard Disk to backup" msgstr "" #: ../../standalone/drakbackup_.c:2070 msgid "Restore from Hard Disk." msgstr "" #: ../../standalone/drakbackup_.c:2072 msgid "Please enter the directory where backups are stored" msgstr "" #: ../../standalone/drakbackup_.c:2130 msgid "Select another media to restore from" msgstr "" #: ../../standalone/drakbackup_.c:2132 msgid "Other Media" msgstr "" #: ../../standalone/drakbackup_.c:2138 msgid "Restore system" msgstr "" #: ../../standalone/drakbackup_.c:2139 msgid "Restore Users" msgstr "" #: ../../standalone/drakbackup_.c:2140 msgid "Restore Other" msgstr "" #: ../../standalone/drakbackup_.c:2142 msgid "select path to restore (instead of / )" msgstr "" #: ../../standalone/drakbackup_.c:2146 msgid "Do new backup before restore (only for incremental backups.)" msgstr "" #: ../../standalone/drakbackup_.c:2147 msgid "Remove user directories before restore." msgstr "" #: ../../standalone/drakbackup_.c:2204 msgid "Restore all backups" msgstr "" #: ../../standalone/drakbackup_.c:2212 msgid "Custom Restore" msgstr "" #: ../../standalone/drakbackup_.c:2253 ../../standalone/drakbackup_.c:2278 #: ../../standalone/drakbackup_.c:2299 ../../standalone/drakbackup_.c:2320 #: ../../standalone/drakbackup_.c:2338 ../../standalone/drakbackup_.c:2370 #: ../../standalone/drakbackup_.c:2386 ../../standalone/drakbackup_.c:2406 #: ../../standalone/drakbackup_.c:2425 ../../standalone/drakbackup_.c:2447 msgid "Help" msgstr "" #: ../../standalone/drakbackup_.c:2256 ../../standalone/drakbackup_.c:2283 #: ../../standalone/drakbackup_.c:2302 ../../standalone/drakbackup_.c:2323 #: ../../standalone/drakbackup_.c:2341 ../../standalone/drakbackup_.c:2389 #: ../../standalone/drakbackup_.c:2409 ../../standalone/drakbackup_.c:2428 msgid "Previous" msgstr "" #: ../../standalone/drakbackup_.c:2258 ../../standalone/drakbackup_.c:2325 #: ../../standalone/logdrake_.c:216 msgid "Save" msgstr "" #: ../../standalone/drakbackup_.c:2304 msgid "Build Backup" msgstr "" #: ../../standalone/drakbackup_.c:2343 ../../standalone/drakbackup_.c:3020 msgid "Restore" msgstr "" #: ../../standalone/drakbackup_.c:2391 ../../standalone/drakbackup_.c:2411 #: ../../standalone/drakbackup_.c:2432 msgid "Next" msgstr "" #: ../../standalone/drakbackup_.c:2465 msgid "" "Please Build backup before to restore it...\n" " or verify that your path to save is correct." msgstr "" #: ../../standalone/drakbackup_.c:2486 msgid "" "Error durind sendmail\n" " your report mail was not sent\n" " Please configure sendmail" msgstr "" #: ../../standalone/drakbackup_.c:2509 msgid "Package List to Install" msgstr "" #: ../../standalone/drakbackup_.c:2537 msgid "" "Error durind sending file via FTP.\n" " Please correct your FTP configuration." msgstr "" #: ../../standalone/drakbackup_.c:2560 msgid "Please select data to restore..." msgstr "" #: ../../standalone/drakbackup_.c:2581 msgid "Please select media for backup..." msgstr "" #: ../../standalone/drakbackup_.c:2603 msgid "Please select data to backup..." msgstr "" #: ../../standalone/drakbackup_.c:2625 msgid "" "No configuration file found \n" "please click Wizard or Advanced." msgstr "" #: ../../standalone/drakbackup_.c:2646 msgid "Under Devel ... please wait." msgstr "" #: ../../standalone/drakbackup_.c:2726 msgid "Backup system files" msgstr "" #: ../../standalone/drakbackup_.c:2728 msgid "Backup user files" msgstr "" #: ../../standalone/drakbackup_.c:2730 msgid "Backup other files" msgstr "" #: ../../standalone/drakbackup_.c:2732 ../../standalone/drakbackup_.c:2763 msgid "Total Progress" msgstr "" #: ../../standalone/drakbackup_.c:2754 msgid "files sending by FTP" msgstr "" #: ../../standalone/drakbackup_.c:2758 msgid "Sending files..." msgstr "" #: ../../standalone/drakbackup_.c:2828 msgid "Data list to include on CDROM." msgstr "" #: ../../standalone/drakbackup_.c:2886 msgid "Please enter the cd writer speed" msgstr "" #: ../../standalone/drakbackup_.c:2904 msgid "Please enter your CD Writer device name (ex: 0,1,0)" msgstr "" #: ../../standalone/drakbackup_.c:2910 msgid "Please check if you want to include install boot on your CD." msgstr "" #: ../../standalone/drakbackup_.c:2976 msgid "Backup Now from configuration file" msgstr "" #: ../../standalone/drakbackup_.c:2986 msgid "View Backup Configuration." msgstr "" #: ../../standalone/drakbackup_.c:3007 msgid "Wizard Configuration" msgstr "" #: ../../standalone/drakbackup_.c:3011 msgid "Advanced Configuration" msgstr "" #: ../../standalone/drakbackup_.c:3015 msgid "Backup Now" msgstr "" #: ../../standalone/drakbackup_.c:3040 msgid "Drakbackup" msgstr "" #: ../../standalone/drakbackup_.c:3091 msgid "" "options description:\n" "\n" " In this step Drakbackup allow you to change:\n" "\n" " - The compression mode:\n" " \n" " If you check bzip2 compression, you will compress\n" " your data better than gzip (about 2-10 %).\n" " This option is not checked by default because\n" " this compression mode needs more time ( about 1000% more).\n" " \n" " - The update mode:\n" "\n" " This option will update your backup, but this\n" " option is not really useful because you need to\n" " decompress your backup before you can update it.\n" " \n" " - the .backupignore mode:\n" "\n" " Like with cvs, Drakbackup will ignore all references\n" " included in .backupignore files in each directories.\n" " ex: \n" " /*> cat .backupignore*/\n" " *.o\n" " *~\n" " ...\n" " \n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:3121 msgid "" "\n" " Some errors during sendmail are caused by \n" " a bad configuration of postfix. To solve it you have to\n" " set myhostname or mydomain in /etc/postfix/main.cf\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:3129 msgid "" "options description:\n" "\n" " - Backup system files:\n" " \n" "\tThis option allows you to backup your /etc directory,\n" "\twhich contains all configuration files. Please be\n" "\tcareful during the restore step to not overwrite:\n" "\t\t/etc/passwd \n" "\t\t/etc/group \n" "\t\t/etc/fstab\n" "\n" " - Backup User files: \n" "\n" "\tThis option allows you select all users that you want \n" "\tto backup.\n" "\tTo preserve disk space, it is recommended that you \n" "\tdo not include web browser's cache.\n" "\n" " - Backup Other files: \n" "\n" "\tThis option allows you to add more data to save.\n" "\tWith the other backup it's not possible at the \n" "\tmoment to select select incremental backup.\t\t\n" " \n" " - Incremental Backups:\n" "\n" "\tThe incremental backup is the most powerful \n" "\toption for backup. This option allows you \n" "\tto backup all your data the first time, and \n" "\tonly the changed afterward.\n" "\tThen you will be able, during the restore\n" "\tstep, to restore your data from a specified\n" "\tdate.\n" "\tIf you have not selected this option all\n" "\told backups are deleted before each backup. \n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:3168 msgid "" "restore description:\n" " \n" "Only the most recent date will be used ,because with incremental \n" "backups it is necesarry to restore one by one each older backups.\n" "\n" "So if you don't like to restore an user please unselect all his\n" "check box.\n" "\n" "Otherwise, you are able to select only one of this\n" "\n" " - Incremental Backups:\n" "\n" "\tThe incremental backup is the most powerfull \n" "\toption to use backup, this option allow you \n" "\tto backup all your data the first time, and \n" "\tonly the changed after.\n" "\tSo you will be able during the restore\n" "\tstep, to restore your data from a specified\n" "\tdate.\n" "\tIf you have not selected this options all\n" "\told backups are deleted before each backup. \n" "\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:3194 ../../standalone/drakbackup_.c:3269 msgid "" " Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien " msgstr "" #: ../../standalone/drakbackup_.c:3196 ../../standalone/drakbackup_.c:3271 msgid "" " This program is free software; you can redistribute it and/or modify\n" " it under the terms of the GNU General Public License as published by\n" " the Free Software Foundation; either version 2, or (at your option)\n" " any later version.\n" "\n" " This program is distributed in the hope that it will be useful,\n" " but WITHOUT ANY WARRANTY; without even the implied warranty of\n" " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" " GNU General Public License for more details.\n" "\n" " You should have received a copy of the GNU General Public License\n" " along with this program; if not, write to the Free Software\n" " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA." msgstr "" #: ../../standalone/drakbackup_.c:3210 msgid "" "Description:\n" "\n" " Drakbackup is used to backup your system.\n" " During the configuration you can select: \n" "\t- System files, \n" "\t- Users files, \n" "\t- Other files.\n" "\tor All your system ... and Other (like Windows Partitions)\n" "\n" " Drakbackup allows you to backup your system on:\n" "\t- Harddrive.\n" "\t- NFS.\n" "\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n" "\t- FTP.\n" "\t- Rsync.\n" "\t- Webdav.\n" "\t- Tape.\n" "\n" " Drakbackup allows you to restore your system to\n" " a user selected directory.\n" "\n" " Per default all backup will be stored on your\n" " /var/lib/drakbackup directory\n" "\n" " Configuration file:\n" "\t/etc/drakconf/drakbackup/drakbakup.conf\n" "\n" "\n" "Restore Step:\n" " \n" " During the restore step, DrakBackup will remove \n" " your original directory and verify that all \n" " backup files are not corrupted. It is recommended \n" " you do a last backup before restoring.\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:3248 msgid "" "options description:\n" "\n" "Please be careful when you are using ftp backup, because only \n" "backups that are already built are sent to the server.\n" "So at the moment, you need to build the backup on your hard \n" "drive before sending it to the server.\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:3257 msgid "" "\n" "Restore Backup Problems:\n" "\n" "During the restore step, Drakbackup will verify all your\n" "backup files before restoring them.\n" "Before the restore, Drakbackup will remove \n" "your original directory, and you will loose all your \n" "data. It is important to be careful and not modify the \n" "backup data files by hand.\n" msgstr "" #: ../../standalone/drakbackup_.c:3285 msgid "" "Description:\n" "\n" " Drakbackup is used to backup your system.\n" " During the configuration you can select \n" "\t- System files, \n" "\t- Users files, \n" "\t- Other files.\n" "\tor All your system ... and Other (like Windows Partitions)\n" "\n" " Drakbackup allows you to backup your system on:\n" "\t- Harddrive.\n" "\t- NFS.\n" "\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n" "\t- FTP.\n" "\t- Rsync.\n" "\t- Webdav.\n" "\t- Tape.\n" "\n" " Drakbackup allows you to restore your system to\n" " a user selected directory.\n" "\n" " Per default all backup will be stored on your\n" " /var/lib/drakbackup directory\n" "\n" " Configuration file:\n" "\t/etc/drakconf/drakbackup/drakbakup.conf\n" "\n" "Restore Step:\n" " \n" " During the restore step, Drakbackup will remove\n" " your original directory and verify that all\n" " backup files are not corrupted. It is recommended\n" " you do a last backup before restoring.\n" " \n" "\n" msgstr "" #: ../../standalone/drakboot_.c:56 msgid "Installation of LILO failed. The following error occured:" msgstr "" #: ../../standalone/drakfont_.c:228 msgid "Search installed fonts" msgstr "" #: ../../standalone/drakfont_.c:230 msgid "Unselect fonts installed" msgstr "" #: ../../standalone/drakfont_.c:251 msgid "parse all fonts" msgstr "" #: ../../standalone/drakfont_.c:252 msgid "no fonts found" msgstr "" #: ../../standalone/drakfont_.c:260 ../../standalone/drakfont_.c:302 #: ../../standalone/drakfont_.c:351 ../../standalone/drakfont_.c:408 #: ../../standalone/drakfont_.c:414 ../../standalone/drakfont_.c:440 #: ../../standalone/drakfont_.c:452 ../../standalone/drakfont_.c:465 msgid "done" msgstr "" #: ../../standalone/drakfont_.c:264 msgid "could not find any font in your mounted partitions" msgstr "" #: ../../standalone/drakfont_.c:300 msgid "Reselect correct fonts" msgstr "" #: ../../standalone/drakfont_.c:303 msgid "could not find any font.\n" msgstr "" #: ../../standalone/drakfont_.c:326 msgid "Search fonts in installed list" msgstr "" #: ../../standalone/drakfont_.c:349 msgid "Fonts copy" msgstr "" #: ../../standalone/drakfont_.c:352 msgid "True Type fonts installation" msgstr "" #: ../../standalone/drakfont_.c:355 msgid "please wait during ttmkfdir..." msgstr "" #: ../../standalone/drakfont_.c:357 msgid "True Type install done" msgstr "" #: ../../standalone/drakfont_.c:364 ../../standalone/drakfont_.c:380 msgid "Fonts conversion" msgstr "" #: ../../standalone/drakfont_.c:368 ../../standalone/drakfont_.c:384 #: ../../standalone/drakfont_.c:404 msgid "type1inst building" msgstr "" #: ../../standalone/drakfont_.c:373 ../../standalone/drakfont_.c:388 msgid "Ghostscript referencing" msgstr "" #: ../../standalone/drakfont_.c:395 msgid "ttf fonts conversion" msgstr "" #: ../../standalone/drakfont_.c:399 msgid "pfm fonts conversion" msgstr "" #: ../../standalone/drakfont_.c:409 msgid "Suppress temporary Files" msgstr "" #: ../../standalone/drakfont_.c:412 msgid "Restart XFS" msgstr "" #: ../../standalone/drakfont_.c:450 ../../standalone/drakfont_.c:460 msgid "Suppress Fonts Files" msgstr "" #: ../../standalone/drakfont_.c:462 msgid "xfs restart" msgstr "" #: ../../standalone/drakfont_.c:469 msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "-You can install the fonts using the normal way. In rare cases, bogus fonts " "may hang up your X Server." msgstr "" #: ../../standalone/drakfont_.c:544 msgid "Fonts Importation" msgstr "" #: ../../standalone/drakfont_.c:562 msgid "Get Windows Fonts" msgstr "" #: ../../standalone/drakfont_.c:564 msgid "Advanced Options" msgstr "" #: ../../standalone/drakfont_.c:566 msgid "Uninstall Fonts" msgstr "" #: ../../standalone/drakfont_.c:568 msgid "Font List" msgstr "" #: ../../standalone/drakfont_.c:573 msgid "About" msgstr "" #: ../../standalone/drakfont_.c:575 msgid " Help " msgstr "" #: ../../standalone/drakfont_.c:719 msgid "Choose the applications that will support the fonts :" msgstr "" #: ../../standalone/drakfont_.c:723 msgid "Ghostscript" msgstr "" #: ../../standalone/drakfont_.c:727 msgid "StarOffice" msgstr "" #: ../../standalone/drakfont_.c:731 msgid "Abiword" msgstr "" #: ../../standalone/drakfont_.c:735 msgid "Generic Printers" msgstr "" #: ../../standalone/drakfont_.c:772 msgid "Select the font file or directory and click on 'Add'" msgstr "" #: ../../standalone/drakfont_.c:808 msgid "Install List" msgstr "" #: ../../standalone/drakfont_.c:838 msgid "click here if you are sure." msgstr "" #: ../../standalone/drakfont_.c:840 msgid "here if no." msgstr "" #: ../../standalone/drakfont_.c:877 msgid "Unselected All" msgstr "" #: ../../standalone/drakfont_.c:879 msgid "Selected All" msgstr "" #: ../../standalone/drakfont_.c:881 msgid "Remove List" msgstr "" #: ../../standalone/drakfont_.c:899 ../../standalone/drakfont_.c:919 msgid "Initials tests" msgstr "" #: ../../standalone/drakfont_.c:900 msgid "Copy fonts on your system" msgstr "" #: ../../standalone/drakfont_.c:901 msgid "Install & convert Fonts" msgstr "" #: ../../standalone/drakfont_.c:902 msgid "Post Install" msgstr "" #: ../../standalone/drakfont_.c:920 msgid "Remove fonts on your system" msgstr "" #: ../../standalone/drakfont_.c:921 msgid "Post Uninstall" msgstr "" #: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:191 msgid "Internet Connection Sharing" msgstr "" #: ../../standalone/drakgw_.c:129 msgid "Internet Connection Sharing currently enabled" msgstr "" #: ../../standalone/drakgw_.c:130 msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" #: ../../standalone/drakgw_.c:134 msgid "disable" msgstr "" #: ../../standalone/drakgw_.c:134 ../../standalone/drakgw_.c:159 msgid "dismiss" msgstr "" #: ../../standalone/drakgw_.c:134 ../../standalone/drakgw_.c:159 msgid "reconfigure" msgstr "" #: ../../standalone/drakgw_.c:137 msgid "Disabling servers..." msgstr "" #: ../../standalone/drakgw_.c:145 msgid "Internet connection sharing is now disabled." msgstr "" #: ../../standalone/drakgw_.c:154 msgid "Internet Connection Sharing currently disabled" msgstr "" #: ../../standalone/drakgw_.c:155 msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" #: ../../standalone/drakgw_.c:159 msgid "enable" msgstr "" #: ../../standalone/drakgw_.c:166 msgid "Enabling servers..." msgstr "" #: ../../standalone/drakgw_.c:171 msgid "Internet connection sharing is now enabled." msgstr "" #: ../../standalone/drakgw_.c:192 msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use " "this computer's Internet connection.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" #: ../../standalone/drakgw_.c:218 #, c-format msgid "Interface %s (using module %s)" msgstr "" #: ../../standalone/drakgw_.c:219 #, c-format msgid "Interface %s" msgstr "" #: ../../standalone/drakgw_.c:227 msgid "No network adapter on your system!" msgstr "" #: ../../standalone/drakgw_.c:228 msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "" #: ../../standalone/drakgw_.c:234 msgid "Network interface" msgstr "" #: ../../standalone/drakgw_.c:235 #, c-format msgid "" "There is only one configured network adapter on your system:\n" "\n" "%s\n" "\n" "I am about to setup your Local Area Network with that adapter." msgstr "" #: ../../standalone/drakgw_.c:244 msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." msgstr "" #: ../../standalone/drakgw_.c:262 msgid "Network interface already configured" msgstr "" #: ../../standalone/drakgw_.c:263 #, c-format msgid "" "Warning, the network adapter (%s) is already configured.\n" "\n" "Do you want an automatic re-configuration?\n" "\n" "You can do it manually but you need to know what you're doing." msgstr "" #: ../../standalone/drakgw_.c:268 msgid "Automatic reconfiguration" msgstr "" #: ../../standalone/drakgw_.c:269 msgid "Show current interface configuration" msgstr "" #: ../../standalone/drakgw_.c:271 #, c-format msgid "" "Current configuration of `%s':\n" "\n" "Network: %s\n" "IP address: %s\n" "IP attribution: %s\n" "Driver: %s" msgstr "" #: ../../standalone/drakgw_.c:283 msgid "" "I can keep your current configuration and assume you already set up a DHCP " "server; in that case please verify I correctly read the C-Class Network that " "you use for your local network; I will not reconfigure it and I will not " "touch your DHCP server configuration.\n" "\n" "Else, I can reconfigure your interface and (re)configure a DHCP server for " "you.\n" "\n" msgstr "" #: ../../standalone/drakgw_.c:288 msgid "C-Class Local Network" msgstr "" #: ../../standalone/drakgw_.c:289 msgid "(This) DHCP Server IP" msgstr "" #: ../../standalone/drakgw_.c:290 msgid "Re-configure interface and DHCP server" msgstr "" #: ../../standalone/drakgw_.c:297 msgid "The Local Network did not finish with `.0', bailing out." msgstr "" #: ../../standalone/drakgw_.c:308 #, c-format msgid "Potential LAN address conflict found in current config of %s!\n" msgstr "" #: ../../standalone/drakgw_.c:316 ../../standalone/drakgw_.c:322 msgid "Firewalling configuration detected!" msgstr "" #: ../../standalone/drakgw_.c:317 ../../standalone/drakgw_.c:323 msgid "" "Warning! An existing firewalling configuration has been detected. You may " "need some manual fix after installation." msgstr "" #: ../../standalone/drakgw_.c:331 msgid "Configuring..." msgstr "" #: ../../standalone/drakgw_.c:332 msgid "Configuring scripts, installing software, starting servers..." msgstr "" #: ../../standalone/drakgw_.c:369 #, c-format msgid "Problems installing package %s" msgstr "" #: ../../standalone/drakgw_.c:663 msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local " "Area Network, using automatic network configuration (DHCP)." msgstr "" #: ../../standalone/drakgw_.c:680 msgid "The setup has already been done, but it's currently disabled." msgstr "" #: ../../standalone/drakgw_.c:681 msgid "The setup has already been done, and it's currently enabled." msgstr "" #: ../../standalone/drakgw_.c:682 msgid "No Internet Connection Sharing has ever been configured." msgstr "" #: ../../standalone/drakgw_.c:687 msgid "Internet connection sharing configuration" msgstr "" #: ../../standalone/drakgw_.c:694 #, c-format msgid "" "Welcome to the Internet Connection Sharing utility!\n" "\n" "%s\n" "\n" "Click on Configure to launch the setup wizard." msgstr "" #: ../../standalone/draknet_.c:80 #, c-format msgid "Network configuration (%d adapters)" msgstr "" #: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:594 msgid "Profile: " msgstr "" #: ../../standalone/draknet_.c:95 msgid "Del profile..." msgstr "" #: ../../standalone/draknet_.c:101 msgid "Profile to delete:" msgstr "" #: ../../standalone/draknet_.c:129 msgid "New profile..." msgstr "" #: ../../standalone/draknet_.c:135 msgid "" "Name of the profile to create (the new profile is created as a copy of the " "current one) :" msgstr "" #: ../../standalone/draknet_.c:161 msgid "Hostname: " msgstr "" #: ../../standalone/draknet_.c:168 msgid "Internet access" msgstr "" #: ../../standalone/draknet_.c:181 msgid "Type:" msgstr "" #: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:375 msgid "Gateway:" msgstr "" #: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:375 msgid "Interface:" msgstr "" #: ../../standalone/draknet_.c:195 msgid "Status:" msgstr "" #: ../../standalone/draknet_.c:202 msgid "Wait please" msgstr "" #: ../../standalone/draknet_.c:220 msgid "Configure Internet Access..." msgstr "" #: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:448 msgid "LAN configuration" msgstr "" #: ../../standalone/draknet_.c:232 msgid "Driver" msgstr "" #: ../../standalone/draknet_.c:232 msgid "Interface" msgstr "" #: ../../standalone/draknet_.c:232 msgid "Protocol" msgstr "" #: ../../standalone/draknet_.c:232 msgid "State" msgstr "" #: ../../standalone/draknet_.c:244 msgid "Configure Local Area Network..." msgstr "" #: ../../standalone/draknet_.c:256 msgid "Click here to launch the wizard ->" msgstr "" #: ../../standalone/draknet_.c:257 msgid "Wizard..." msgstr "" #: ../../standalone/draknet_.c:283 msgid "Apply" msgstr "" #: ../../standalone/draknet_.c:302 msgid "Please Wait... Applying the configuration" msgstr "" #: ../../standalone/draknet_.c:383 ../../standalone/draknet_.c:406 msgid "Connected" msgstr "" #: ../../standalone/draknet_.c:383 ../../standalone/draknet_.c:406 msgid "Not connected" msgstr "" #: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407 msgid "Connect..." msgstr "" #: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407 msgid "Disconnect..." msgstr "" #: ../../standalone/draknet_.c:403 msgid "" "Warning, another Internet connection has been detected, maybe using your " "network" msgstr "" #: ../../standalone/draknet_.c:430 msgid "" "You don't have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" #: ../../standalone/draknet_.c:452 msgid "LAN Configuration" msgstr "" #: ../../standalone/draknet_.c:463 #, c-format msgid "Adapter %s: %s" msgstr "" #: ../../standalone/draknet_.c:469 msgid "Boot Protocol" msgstr "" #: ../../standalone/draknet_.c:470 msgid "Started on boot" msgstr "" #: ../../standalone/draknet_.c:471 msgid "DHCP client" msgstr "" #: ../../standalone/draknet_.c:496 ../../standalone/draknet_.c:499 msgid "activate now" msgstr "" #: ../../standalone/draknet_.c:496 ../../standalone/draknet_.c:499 msgid "deactivate now" msgstr "" #: ../../standalone/draknet_.c:502 msgid "" "This interface has not been configured yet.\n" "Launch the configuration wizard in the main window" msgstr "" #: ../../standalone/draknet_.c:559 msgid "" "You don't have any internet connection.\n" "Create one first by clicking on 'Configure'" msgstr "" #: ../../standalone/draknet_.c:583 msgid "Internet connection configuration" msgstr "" #: ../../standalone/draknet_.c:587 msgid "Internet Connection Configuration" msgstr "" #: ../../standalone/draknet_.c:596 msgid "Connection type: " msgstr "" #: ../../standalone/draknet_.c:602 msgid "Parameters" msgstr "" #: ../../standalone/draknet_.c:620 msgid "Gateway" msgstr "" #: ../../standalone/draknet_.c:629 msgid "Ethernet Card" msgstr "" #: ../../standalone/draknet_.c:630 msgid "DHCP Client" msgstr "" #: ../../standalone/draksec_.c:31 msgid "Setting security level" msgstr "" #: ../../standalone/drakxconf_.c:47 msgid "Control Center" msgstr "" #: ../../standalone/drakxconf_.c:48 msgid "Choose the tool you want to use" msgstr "" #: ../../standalone/drakxtv_.c:37 msgid "Canada (cable)" msgstr "" #: ../../standalone/drakxtv_.c:37 msgid "USA (bcast)" msgstr "" #: ../../standalone/drakxtv_.c:37 msgid "USA (cable)" msgstr "" #: ../../standalone/drakxtv_.c:37 msgid "USA (cable-hrc)" msgstr "" #: ../../standalone/drakxtv_.c:38 msgid "China (bcast)" msgstr "" #: ../../standalone/drakxtv_.c:38 msgid "Japan (bcast)" msgstr "" #: ../../standalone/drakxtv_.c:38 msgid "Japan (cable)" msgstr "" #: ../../standalone/drakxtv_.c:39 msgid "East Europe" msgstr "" #: ../../standalone/drakxtv_.c:39 msgid "Ireland" msgstr "" #: ../../standalone/drakxtv_.c:39 msgid "West Europe" msgstr "" #: ../../standalone/drakxtv_.c:40 msgid "Australia" msgstr "" #: ../../standalone/drakxtv_.c:40 msgid "Newzealand" msgstr "" #: ../../standalone/drakxtv_.c:41 msgid "South Africa" msgstr "" #: ../../standalone/drakxtv_.c:42 msgid "Argentina" msgstr "" #: ../../standalone/drakxtv_.c:45 msgid "" "Please,\n" "type in your tv norm and country" msgstr "" #: ../../standalone/drakxtv_.c:47 msgid "TV norm :" msgstr "" #: ../../standalone/drakxtv_.c:48 msgid "Area :" msgstr "" #: ../../standalone/drakxtv_.c:52 msgid "Scanning for TV channels in progress ..." msgstr "" #: ../../standalone/drakxtv_.c:60 msgid "Scanning for TV channels" msgstr "" #: ../../standalone/keyboarddrake_.c:16 msgid "usage: keyboarddrake [--expert] [keyboard]\n" msgstr "" #: ../../standalone/keyboarddrake_.c:29 msgid "Please, choose your keyboard layout." msgstr "" #: ../../standalone/keyboarddrake_.c:36 msgid "Do you want the BackSpace to return Delete in console?" msgstr "" #: ../../standalone/livedrake_.c:24 msgid "Change Cd-Rom" msgstr "" #: ../../standalone/livedrake_.c:25 msgid "" "Please insert the Installation Cd-Rom in your drive and press Ok when done.\n" "If you don't have it, press Cancel to avoid live upgrade." msgstr "" #: ../../standalone/livedrake_.c:35 msgid "Unable to start live upgrade !!!\n" msgstr "" #: ../../standalone/localedrake_.c:33 msgid "The change is done, but to be effective you must logout" msgstr "" #: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:487 msgid "logdrake" msgstr "" #: ../../standalone/logdrake_.c:95 msgid "Show only for the selected day" msgstr "" #: ../../standalone/logdrake_.c:102 msgid "/File/_New" msgstr "" #: ../../standalone/logdrake_.c:102 msgid "N" msgstr "" #: ../../standalone/logdrake_.c:103 msgid "/File/_Open" msgstr "" #: ../../standalone/logdrake_.c:103 msgid "O" msgstr "" #: ../../standalone/logdrake_.c:104 msgid "/File/_Save" msgstr "" #: ../../standalone/logdrake_.c:104 msgid "S" msgstr "" #: ../../standalone/logdrake_.c:105 msgid "/File/Save _As" msgstr "" #: ../../standalone/logdrake_.c:106 msgid "/File/-" msgstr "" #: ../../standalone/logdrake_.c:108 msgid "/_Options" msgstr "" #: ../../standalone/logdrake_.c:109 msgid "/Options/Test" msgstr "" #: ../../standalone/logdrake_.c:110 msgid "/_Help" msgstr "" #: ../../standalone/logdrake_.c:111 msgid "/Help/_About..." msgstr "" #: ../../standalone/logdrake_.c:118 msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*" msgstr "" #: ../../standalone/logdrake_.c:119 msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*" msgstr "" #: ../../standalone/logdrake_.c:173 msgid "User" msgstr "" #: ../../standalone/logdrake_.c:174 msgid "Messages" msgstr "" #: ../../standalone/logdrake_.c:175 msgid "Syslog" msgstr "" #: ../../standalone/logdrake_.c:176 msgid "Mandrake Tools Explanations" msgstr "" #: ../../standalone/logdrake_.c:179 msgid "search" msgstr "" #: ../../standalone/logdrake_.c:185 msgid "A tool to monitor your logs" msgstr "" #: ../../standalone/logdrake_.c:186 msgid "Settings" msgstr "" #: ../../standalone/logdrake_.c:191 msgid "matching" msgstr "" #: ../../standalone/logdrake_.c:192 msgid "but not matching" msgstr "" #: ../../standalone/logdrake_.c:196 msgid "Choose file" msgstr "" #: ../../standalone/logdrake_.c:201 msgid "Calendar" msgstr "" #: ../../standalone/logdrake_.c:211 msgid "Content of the file" msgstr "" #: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:381 msgid "Mail/SMS alert" msgstr "" #: ../../standalone/logdrake_.c:260 #, c-format msgid "please wait, parsing file: %s" msgstr "" #: ../../standalone/logdrake_.c:396 msgid "Mail/SMS alert configuration" msgstr "" #: ../../standalone/logdrake_.c:397 msgid "" "Welcome to the mail/SMS configuration utility.\n" "\n" "Here, you'll be able to set up the alert system.\n" msgstr "" #: ../../standalone/logdrake_.c:405 msgid "proftpd" msgstr "" #: ../../standalone/logdrake_.c:408 msgid "sshd" msgstr "" #: ../../standalone/logdrake_.c:409 msgid "webmin" msgstr "" #: ../../standalone/logdrake_.c:410 msgid "xinetd" msgstr "" #: ../../standalone/logdrake_.c:413 msgid "service setting" msgstr "" #: ../../standalone/logdrake_.c:414 msgid "" "You will receive an alert if one of the selected service is no more running" msgstr "" #: ../../standalone/logdrake_.c:424 msgid "load setting" msgstr "" #: ../../standalone/logdrake_.c:425 msgid "You will receive an alert if the load is higher than this value" msgstr "" #: ../../standalone/logdrake_.c:436 msgid "alert configuration" msgstr "" #: ../../standalone/logdrake_.c:437 msgid "Configure the way the system will alert you" msgstr "" #: ../../standalone/logdrake_.c:464 msgid "Save as.." msgstr "" #: ../../standalone/mousedrake_.c:49 msgid "Please, choose the type of your mouse." msgstr "" #: ../../standalone/mousedrake_.c:59 msgid "no serial_usb found\n" msgstr "" #: ../../standalone/mousedrake_.c:63 msgid "Emulate third button?" msgstr "" #: ../../standalone/scannerdrake_.c:53 #, c-format msgid "%s found on %s, configure it ?" msgstr "" #: ../../standalone/scannerdrake_.c:60 msgid "Select a scanner" msgstr "" #: ../../standalone/scannerdrake_.c:82 #, c-format msgid "This %s scanner is unsupported" msgstr "" #: ../../standalone/scannerdrake_.c:94 #, c-format msgid "" "This %s scanner must be configured by printerdrake.\n" "You can launch printerdrake from the Mandrake Control Center in Hardware " "section." msgstr "" #: ../../standalone/tinyfirewall_.c:31 msgid "Firewalling Configuration" msgstr "" #: ../../standalone/tinyfirewall_.c:44 msgid "Firewalling configuration" msgstr "" #: ../../standalone/tinyfirewall_.c:79 msgid "" "Firewalling\n" "\n" "You already have set up a firewall.\n" "Click on Configure to change or remove the firewall" msgstr "" #: ../../standalone/tinyfirewall_.c:83 msgid "" "Firewalling\n" "\n" "Click on Configure to set up a standard firewall" msgstr "" #: ../../steps.pm_.c:14 msgid "Choose your language" msgstr "" #: ../../steps.pm_.c:15 msgid "Select installation class" msgstr "" #: ../../steps.pm_.c:16 msgid "Hard drive detection" msgstr "" #: ../../steps.pm_.c:17 msgid "Configure mouse" msgstr "" #: ../../steps.pm_.c:18 msgid "Choose your keyboard" msgstr "" #: ../../steps.pm_.c:19 msgid "Security" msgstr "" #: ../../steps.pm_.c:20 msgid "Setup filesystems" msgstr "" #: ../../steps.pm_.c:21 msgid "Format partitions" msgstr "" #: ../../steps.pm_.c:22 msgid "Choose packages to install" msgstr "" #: ../../steps.pm_.c:23 msgid "Install system" msgstr "" #: ../../steps.pm_.c:25 msgid "Add a user" msgstr "" #: ../../steps.pm_.c:26 msgid "Configure networking" msgstr "" #: ../../steps.pm_.c:28 msgid "Configure services" msgstr "" #: ../../steps.pm_.c:29 msgid "Install bootloader" msgstr "" #: ../../steps.pm_.c:31 msgid "Create a bootdisk" msgstr "" #: ../../steps.pm_.c:33 msgid "Configure X" msgstr "" #: ../../steps.pm_.c:34 msgid "Install system updates" msgstr "" #: ../../steps.pm_.c:35 msgid "Exit install" msgstr "" #: ../../tinyfirewall.pm_.c:9 msgid "" "tinyfirewall configurator\n" "\n" "This configures a personal firewall for this Mandrake Linux machine.\n" "For a powerful dedicated firewall solution, please look to the\n" "specialized MandrakeSecurity Firewall distribution." msgstr "" #: ../../tinyfirewall.pm_.c:14 msgid "" "We'll now ask you questions about which services you'd like to allow\n" "the Internet to connect to. Please think carefully about these\n" "questions, as your computer's security is important.\n" "\n" "Please, if you're not currently using one of these services, firewall\n" "it off. You can change this configuration anytime you like by\n" "re-running this application!" msgstr "" #: ../../tinyfirewall.pm_.c:21 msgid "" "Are you running a web server on this machine that you need the whole\n" "Internet to see? If you are running a webserver that only needs to be\n" "accessed by this machine, you can safely answer NO here.\n" "\n" msgstr "" #: ../../tinyfirewall.pm_.c:26 msgid "" "Are you running a name server on this machine? If you didn't set one\n" "up to give away IP and zone information to the whole Internet, please\n" "answer no.\n" "\n" msgstr "" #: ../../tinyfirewall.pm_.c:31 msgid "" "Do you want to allow incoming Secure Shell (ssh) connections? This\n" "is a telnet-replacement that you might use to login. If you're using\n" "telnet now, you should definitely switch to ssh. telnet is not\n" "encrypted -- so some attackers can steal your password if you use\n" "it. ssh is encrypted and doesn't allow for this eavesdropping." msgstr "" #: ../../tinyfirewall.pm_.c:36 msgid "" "Do you want to allow incoming telnet connections?\n" "This is horribly unsafe, as we explained in the previous screen. We\n" "strongly recommend answering No here and using ssh in place of\n" "telnet.\n" msgstr "" #: ../../tinyfirewall.pm_.c:41 msgid "" "Are you running an FTP server here that you need accessible to the\n" "Internet? If you are, we strongly recommend that you only use it for\n" "Anonymous transfers. Any passwords sent by FTP can be stolen by some\n" "attackers, since FTP also uses no encryption for transferring passwords.\n" msgstr "" #: ../../tinyfirewall.pm_.c:46 msgid "" "Are you running a mail server here? If you're sending you \n" "messages through pine, mutt or any other text-based mail client,\n" "you probably are. Otherwise, you should firewall this off.\n" "\n" msgstr "" #: ../../tinyfirewall.pm_.c:51 msgid "" "Are you running a POP or IMAP server here? This would\n" "be used to host non-web-based mail accounts for people via \n" "this machine.\n" "\n" msgstr "" #: ../../tinyfirewall.pm_.c:56 msgid "" "You appear to be running a 2.2 kernel. If your network IP\n" "is automatically set by a computer in your home or office \n" "(dynamically assigned), we need to allow for this. Is\n" "this the case?\n" msgstr "" #: ../../tinyfirewall.pm_.c:61 msgid "" "Is your computer getting time syncronized to another computer?\n" "Mostly, this is used by medium-large Unix/Linux organizations\n" "to synchronize time for logging and such. If you're not part\n" "of a larger office and haven't heard of this, you probably \n" "aren't." msgstr "" #: ../../tinyfirewall.pm_.c:66 msgid "" "Configuration complete. May we write these changes to disk?\n" "\n" "\n" "\n" msgstr "" #: ../../tinyfirewall.pm_.c:82 #, c-format msgid "Can't open %s: %s\n" msgstr "" #: ../../tinyfirewall.pm_.c:84 #, c-format msgid "Can't open %s for writing: %s\n" msgstr "" #: ../../share/compssUsers:999 msgid "Web/FTP" msgstr "" #: ../../share/compssUsers:999 msgid "Network Computer (client)" msgstr "" #: ../../share/compssUsers:999 msgid "NFS server, SMB server, Proxy server, ssh server" msgstr "" #: ../../share/compssUsers:999 msgid "Office" msgstr "" #: ../../share/compssUsers:999 msgid "Gnome Workstation" msgstr "" #: ../../share/compssUsers:999 msgid "Tools for your Palm Pilot or your Visor" msgstr "" #: ../../share/compssUsers:999 msgid "Workstation" msgstr "" #: ../../share/compssUsers:999 msgid "Firewall/Router" msgstr "" #: ../../share/compssUsers:999 msgid "Domain Name and Network Information Server" msgstr "" #: ../../share/compssUsers:999 msgid "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, gnumeric), pdf viewers, etc" msgstr "" #: ../../share/compssUsers:999 msgid "Audio-related tools: mp3 or midi players, mixers, etc" msgstr "" #: ../../share/compssUsers:999 msgid "Books and Howto's on Linux and Free Software" msgstr "" #: ../../share/compssUsers:999 msgid "KDE Workstation" msgstr "" #: ../../share/compssUsers:999 msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "" #: ../../share/compssUsers:999 msgid "Multimedia - Video" msgstr "" #: ../../share/compssUsers:999 msgid "Set of tools for mail, news, web, file transfer, and chat" msgstr "" #: ../../share/compssUsers:999 msgid "Database" msgstr "" #: ../../share/compssUsers:999 msgid "PostgreSQL or MySQL database server" msgstr "" #: ../../share/compssUsers:999 msgid "Tools to ease the configuration of your computer" msgstr "" #: ../../share/compssUsers:999 msgid "Multimedia - Sound" msgstr "" #: ../../share/compssUsers:999 msgid "Utilities" msgstr "" #: ../../share/compssUsers:999 msgid "Documentation" msgstr "" #: ../../share/compssUsers:999 msgid "Console Tools" msgstr "" #: ../../share/compssUsers:999 msgid "Postfix mail server, Inn news server" msgstr "" #: ../../share/compssUsers:999 msgid "Internet station" msgstr "" #: ../../share/compssUsers:999 msgid "Multimedia station" msgstr "" #: ../../share/compssUsers:999 msgid "Configuration" msgstr "" #: ../../share/compssUsers:999 msgid "More Graphical Desktops (Gnome, IceWM)" msgstr "" #: ../../share/compssUsers:999 msgid "The K Desktop Environment, the basic graphical environment with a collection of accompanying tools" msgstr "" #: ../../share/compssUsers:999 msgid "Graphical Environment" msgstr "" #: ../../share/compssUsers:999 msgid "Apache, Pro-ftpd" msgstr "" #: ../../share/compssUsers:999 msgid "Tools to create and burn CD's" msgstr "" #: ../../share/compssUsers:999 msgid "Office Workstation" msgstr "" #: ../../share/compssUsers:999 msgid "Server" msgstr "" #: ../../share/compssUsers:999 msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "" #: ../../share/compssUsers:999 msgid "Graphics programs such as The Gimp" msgstr "" #: ../../share/compssUsers:999 msgid "DNS/NIS " msgstr "" #: ../../share/compssUsers:999 msgid "C and C++ development libraries, programs and include files" msgstr "" #: ../../share/compssUsers:999 msgid "Network Computer server" msgstr "" #: ../../share/compssUsers:999 msgid "Mail/Groupware/News" msgstr "" #: ../../share/compssUsers:999 msgid "Game station" msgstr "" #: ../../share/compssUsers:999 msgid "Video players and editors" msgstr "" #: ../../share/compssUsers:999 msgid "Multimedia - Graphics" msgstr "" #: ../../share/compssUsers:999 msgid "Amusement programs: arcade, boards, strategy, etc" msgstr "" #: ../../share/compssUsers:999 msgid "Set of tools to read and send mail and news (pine, mutt, tin..) and to browse the Web" msgstr "" #: ../../share/compssUsers:999 msgid "Archiving, emulators, monitoring" msgstr "" #: ../../share/compssUsers:999 msgid "Personal Finance" msgstr "" #: ../../share/compssUsers:999 msgid "A graphical environment with user-friendly set of applications and desktop tools" msgstr "" #: ../../share/compssUsers:999 msgid "Clients for different protocols including ssh" msgstr "" #: ../../share/compssUsers:999 msgid "Internet gateway" msgstr "" #: ../../share/compssUsers:999 msgid "Sound and video playing/editing programs" msgstr "" #: ../../share/compssUsers:999 msgid "Other Graphical Desktops" msgstr "" #: ../../share/compssUsers:999 msgid "Editors, shells, file tools, terminals" msgstr "" #: ../../share/compssUsers:999 msgid "Programs to manage your finance, such as gnucash" msgstr "" #: ../../share/compssUsers:999 msgid "Personal Information Management" msgstr "" #: ../../share/compssUsers:999 msgid "Multimedia - CD Burning" msgstr "" #: ../../share/compssUsers:999 msgid "Scientific Workstation" msgstr ""