# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR Free Software Foundation, Inc. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "POT-Creation-Date: 1999-11-22 02:57+0100\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=CHARSET\n" "Content-Transfer-Encoding: ENCODING\n" #: ../Xconfigurator.pm_.c:159 msgid "Select a graphic card" msgstr "" #: ../Xconfigurator.pm_.c:160 msgid "Choose a X server" msgstr "" #: ../Xconfigurator.pm_.c:179 msgid "Select the memory size of your graphic card" msgstr "" #: ../Xconfigurator.pm_.c:201 msgid "Choose options for server" msgstr "" #: ../Xconfigurator.pm_.c:219 msgid "Choose a monitor" msgstr "" #: ../Xconfigurator.pm_.c:222 msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" #: ../Xconfigurator.pm_.c:229 msgid "Horizontal refresh rate" msgstr "" #: ../Xconfigurator.pm_.c:229 msgid "Vertical refresh rate" msgstr "" #: ../Xconfigurator.pm_.c:270 msgid "Monitor not configured" msgstr "" #: ../Xconfigurator.pm_.c:273 msgid "Graphic card not configured yet" msgstr "" #: ../Xconfigurator.pm_.c:276 msgid "Resolutions not chosen yet" msgstr "" #: ../Xconfigurator.pm_.c:285 msgid "Do you want to test the configuration?" msgstr "" #: ../Xconfigurator.pm_.c:285 msgid "Test configuration" msgstr "" #: ../Xconfigurator.pm_.c:317 msgid "An error occurred:" msgstr "" #: ../Xconfigurator.pm_.c:319 msgid "" "\n" "try changing some parameters" msgstr "" #: ../Xconfigurator.pm_.c:340 #, c-format msgid "(leaving in %d seconds)" msgstr "" #: ../Xconfigurator.pm_.c:344 ../install_steps_interactive.pm_.c:616 #: ../my_gtk.pm_.c:438 msgid "Is this correct?" msgstr "" #: ../Xconfigurator.pm_.c:352 msgid "An error occurred, try changing some parameters" msgstr "" #: ../Xconfigurator.pm_.c:360 ../Xconfigurator.pm_.c:525 msgid "Automatic resolutions" msgstr "" #: ../Xconfigurator.pm_.c:361 msgid "" "To find the available resolutions I will try different ones.\n" "Your screen will blink...\n" "You can switch if off if you want, you'll hear a beep when it's over" msgstr "" #: ../Xconfigurator.pm_.c:412 ../install_steps_interactive.pm_.c:571 msgid "Resolution" msgstr "" #: ../Xconfigurator.pm_.c:447 msgid "Choose resolution and color depth" msgstr "" #: ../Xconfigurator.pm_.c:455 msgid "Show all" msgstr "" #: ../Xconfigurator.pm_.c:526 msgid "" "I can try to find the available resolutions (eg: 800x600).\n" "Sometimes, though, it may hang the machine.\n" "Do you want to try?" msgstr "" #: ../Xconfigurator.pm_.c:531 msgid "" "No valid modes found\n" "Try with another video card or monitor" msgstr "" #: ../Xconfigurator.pm_.c:722 #, c-format msgid "Keyboard layout: %s\n" msgstr "" #: ../Xconfigurator.pm_.c:723 #, c-format msgid "Mouse type: %s\n" msgstr "" #: ../Xconfigurator.pm_.c:724 #, c-format msgid "Mouse device: %s\n" msgstr "" #: ../Xconfigurator.pm_.c:725 #, c-format msgid "Monitor: %s\n" msgstr "" #: ../Xconfigurator.pm_.c:726 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "" #: ../Xconfigurator.pm_.c:727 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "" #: ../Xconfigurator.pm_.c:728 #, c-format msgid "Graphic card: %s\n" msgstr "" #: ../Xconfigurator.pm_.c:729 #, c-format msgid "Graphic memory: %s kB\n" msgstr "" #: ../Xconfigurator.pm_.c:730 #, c-format msgid "XFree86 server: %s\n" msgstr "" #: ../Xconfigurator.pm_.c:744 msgid "Preparing X-Window configuration" msgstr "" #: ../Xconfigurator.pm_.c:758 msgid "Change Monitor" msgstr "" #: ../Xconfigurator.pm_.c:759 msgid "Change Graphic card" msgstr "" #: ../Xconfigurator.pm_.c:760 msgid "Change Server options" msgstr "" #: ../Xconfigurator.pm_.c:761 msgid "Change Resolution" msgstr "" #: ../Xconfigurator.pm_.c:762 msgid "Automatical resolutions search" msgstr "" #: ../Xconfigurator.pm_.c:766 msgid "Show information" msgstr "" #: ../Xconfigurator.pm_.c:767 msgid "Test again" msgstr "" #: ../Xconfigurator.pm_.c:768 msgid "Quit" msgstr "" #: ../Xconfigurator.pm_.c:771 msgid "What do you want to do?" msgstr "" #: ../Xconfigurator.pm_.c:778 msgid "X at startup" msgstr "" #: ../Xconfigurator.pm_.c:779 msgid "" "I can set up your computer to automatically start X upon booting.\n" "Would you like X to start when you reboot?" msgstr "" #: ../Xconfigurator_consts.pm_.c:4 msgid "256 colors (8 bits)" msgstr "" #: ../Xconfigurator_consts.pm_.c:5 msgid "32 thousand colors (15 bits)" msgstr "" #: ../Xconfigurator_consts.pm_.c:6 msgid "65 thousand colors (16 bits)" msgstr "" #: ../Xconfigurator_consts.pm_.c:7 msgid "16 million colors (24 bits)" msgstr "" #: ../Xconfigurator_consts.pm_.c:8 msgid "4 billion colors (32 bits)" msgstr "" #: ../Xconfigurator_consts.pm_.c:93 msgid "256 kB" msgstr "" #: ../Xconfigurator_consts.pm_.c:94 msgid "512 kB" msgstr "" #: ../Xconfigurator_consts.pm_.c:95 msgid "1 MB" msgstr "" #: ../Xconfigurator_consts.pm_.c:96 msgid "2 MB" msgstr "" #: ../Xconfigurator_consts.pm_.c:97 msgid "4 MB" msgstr "" #: ../Xconfigurator_consts.pm_.c:98 msgid "8 MB" msgstr "" #: ../Xconfigurator_consts.pm_.c:99 msgid "16 MB or more" msgstr "" #: ../Xconfigurator_consts.pm_.c:103 ../Xconfigurator_consts.pm_.c:104 msgid "Standard VGA, 640x480 at 60 Hz" msgstr "" #: ../Xconfigurator_consts.pm_.c:105 msgid "Super VGA, 800x600 at 56 Hz" msgstr "" #: ../Xconfigurator_consts.pm_.c:106 msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)" msgstr "" #: ../Xconfigurator_consts.pm_.c:107 msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz" msgstr "" #: ../Xconfigurator_consts.pm_.c:108 msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz" msgstr "" #: ../Xconfigurator_consts.pm_.c:109 msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz" msgstr "" #: ../Xconfigurator_consts.pm_.c:110 msgid "High Frequency SVGA, 1024x768 at 70 Hz" msgstr "" #: ../Xconfigurator_consts.pm_.c:111 msgid "Multi-frequency that can do 1280x1024 at 60 Hz" msgstr "" #: ../Xconfigurator_consts.pm_.c:112 msgid "Multi-frequency that can do 1280x1024 at 74 Hz" msgstr "" #: ../Xconfigurator_consts.pm_.c:113 msgid "Multi-frequency that can do 1280x1024 at 76 Hz" msgstr "" #: ../Xconfigurator_consts.pm_.c:114 msgid "Monitor that can do 1600x1200 at 70 Hz" msgstr "" #: ../Xconfigurator_consts.pm_.c:115 msgid "Monitor that can do 1600x1200 at 76 Hz" msgstr "" #: ../diskdrake.pm_.c:16 msgid "Create" msgstr "" #: ../diskdrake.pm_.c:17 msgid "Unmount" msgstr "" #: ../diskdrake.pm_.c:18 msgid "Delete" msgstr "" #: ../diskdrake.pm_.c:18 msgid "Format" msgstr "" #: ../diskdrake.pm_.c:18 ../diskdrake.pm_.c:425 msgid "Move" msgstr "" #: ../diskdrake.pm_.c:18 ../diskdrake.pm_.c:484 msgid "Resize" msgstr "" #: ../diskdrake.pm_.c:18 ../diskdrake.pm_.c:367 msgid "Type" msgstr "" #: ../diskdrake.pm_.c:19 ../diskdrake.pm_.c:387 msgid "Mount point" msgstr "" #: ../diskdrake.pm_.c:33 msgid "Write /etc/fstab" msgstr "" #: ../diskdrake.pm_.c:34 msgid "Normal > Expert" msgstr "" #: ../diskdrake.pm_.c:35 msgid "Expert > Normal" msgstr "" #: ../diskdrake.pm_.c:36 msgid "Restore from file" msgstr "" #: ../diskdrake.pm_.c:37 msgid "Save in file" msgstr "" #: ../diskdrake.pm_.c:38 msgid "Restore from floppy" msgstr "" #: ../diskdrake.pm_.c:39 msgid "Save on floppy" msgstr "" #: ../diskdrake.pm_.c:40 ../install_steps_interactive.pm_.c:674 #: ../install_steps_interactive.pm_.c:792 msgid "Done" msgstr "" #: ../diskdrake.pm_.c:43 msgid "Clear all" msgstr "" #: ../diskdrake.pm_.c:44 msgid "Format all" msgstr "" #: ../diskdrake.pm_.c:45 msgid "Auto allocate" msgstr "" #: ../diskdrake.pm_.c:48 msgid "All primary partitions are used" msgstr "" #: ../diskdrake.pm_.c:48 msgid "I can't add any more partition" msgstr "" #: ../diskdrake.pm_.c:48 msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" #: ../diskdrake.pm_.c:51 msgid "Rescue partition table" msgstr "" #: ../diskdrake.pm_.c:52 msgid "Undo" msgstr "" #: ../diskdrake.pm_.c:53 msgid "Write partition table" msgstr "" #: ../diskdrake.pm_.c:54 msgid "Reload" msgstr "" #: ../diskdrake.pm_.c:100 msgid "Filesystem types:" msgstr "" #: ../diskdrake.pm_.c:104 msgid "Empty" msgstr "" #: ../diskdrake.pm_.c:104 msgid "Ext2" msgstr "" #: ../diskdrake.pm_.c:104 msgid "FAT" msgstr "" #: ../diskdrake.pm_.c:104 msgid "Other" msgstr "" #: ../diskdrake.pm_.c:104 msgid "Swap" msgstr "" #: ../diskdrake.pm_.c:107 msgid "Choose action" msgstr "" #: ../diskdrake.pm_.c:109 msgid "Details" msgstr "" #: ../diskdrake.pm_.c:134 #, c-format msgid "After %s partition %s," msgstr "" #: ../diskdrake.pm_.c:134 ../diskdrake.pm_.c:415 ../diskdrake.pm_.c:444 msgid "Read carefully!" msgstr "" #: ../diskdrake.pm_.c:134 msgid "all data on this partition will be lost" msgstr "" #: ../diskdrake.pm_.c:153 ../install_any.pm_.c:173 ../install_steps.pm_.c:73 #: ../install_steps_interactive.pm_.c:43 msgid "Error" msgstr "" #: ../diskdrake.pm_.c:177 ../diskdrake.pm_.c:565 msgid "Mount point: " msgstr "" #: ../diskdrake.pm_.c:178 ../diskdrake.pm_.c:210 msgid "Device: " msgstr "" #: ../diskdrake.pm_.c:179 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "" #: ../diskdrake.pm_.c:180 ../diskdrake.pm_.c:213 msgid "Type: " msgstr "" #: ../diskdrake.pm_.c:181 #, c-format msgid "Start: sector %s\n" msgstr "" #: ../diskdrake.pm_.c:182 #, c-format msgid "Size: %s MB" msgstr "" #: ../diskdrake.pm_.c:184 #, c-format msgid ", %s sectors" msgstr "" #: ../diskdrake.pm_.c:186 #, c-format msgid "Cylinder %d to cylinder %d\n" msgstr "" #: ../diskdrake.pm_.c:187 msgid "Formatted\n" msgstr "" #: ../diskdrake.pm_.c:188 msgid "Not formatted\n" msgstr "" #: ../diskdrake.pm_.c:189 msgid "Mounted\n" msgstr "" #: ../diskdrake.pm_.c:190 #, c-format msgid "RAID md%s\n" msgstr "" #: ../diskdrake.pm_.c:191 msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" #: ../diskdrake.pm_.c:193 #, c-format msgid "Level %s\n" msgstr "" #: ../diskdrake.pm_.c:194 #, c-format msgid "Chunk size %s\n" msgstr "" #: ../diskdrake.pm_.c:195 #, c-format msgid "RAID-disks %s\n" msgstr "" #: ../diskdrake.pm_.c:211 #, c-format msgid "Size: %d MB\n" msgstr "" #: ../diskdrake.pm_.c:212 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "" #: ../diskdrake.pm_.c:214 #, c-format msgid "on bus %d id %d\n" msgstr "" #: ../diskdrake.pm_.c:226 msgid "Mount" msgstr "" #: ../diskdrake.pm_.c:228 msgid "Active" msgstr "" #: ../diskdrake.pm_.c:229 msgid "Add to RAID" msgstr "" #: ../diskdrake.pm_.c:230 msgid "Remove from RAID" msgstr "" #: ../diskdrake.pm_.c:231 msgid "Modify RAID" msgstr "" #: ../diskdrake.pm_.c:327 msgid "" "Sorry I won't accept to create /boot so far onto the drive (on a cylinder > " "1024).\n" "Either you use LILO and it won't work, or you don't use LILO and you don't " "need /boot" msgstr "" #: ../diskdrake.pm_.c:331 msgid "" "The partition you've selected to add as root (/) is physically located " "beyond\n" "the 1024th cylinder of the hard drive, and you have no /boot partition.\n" "If you plan to use the LILO boot manager, be careful to add a /boot partition" msgstr "" #: ../diskdrake.pm_.c:346 msgid "Quit without saving" msgstr "" #: ../diskdrake.pm_.c:346 msgid "Quit without writing the partition table?" msgstr "" #: ../diskdrake.pm_.c:362 msgid "changing type of" msgstr "" #: ../diskdrake.pm_.c:365 msgid "Change partition type" msgstr "" #: ../diskdrake.pm_.c:366 msgid "Which partition type do you want?" msgstr "" #: ../diskdrake.pm_.c:386 #, c-format msgid "Where do you want to mount device %s?" msgstr "" #: ../diskdrake.pm_.c:408 msgid "formatting" msgstr "" #: ../diskdrake.pm_.c:410 msgid "Formatting" msgstr "" #: ../diskdrake.pm_.c:410 ../install_steps_interactive.pm_.c:217 #, c-format msgid "Formatting partition %s" msgstr "" #: ../diskdrake.pm_.c:415 msgid "After formatting all partitions," msgstr "" #: ../diskdrake.pm_.c:415 msgid "all data on these partitions will be lost" msgstr "" #: ../diskdrake.pm_.c:426 msgid "Which disk do you want to move to?" msgstr "" #: ../diskdrake.pm_.c:430 msgid "Sector" msgstr "" #: ../diskdrake.pm_.c:431 msgid "Which sector do you want to move to?" msgstr "" #: ../diskdrake.pm_.c:434 msgid "Moving" msgstr "" #: ../diskdrake.pm_.c:434 msgid "Moving partition..." msgstr "" #: ../diskdrake.pm_.c:444 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "" #: ../diskdrake.pm_.c:446 msgid "You'll need to reboot before the modification can take place" msgstr "" #: ../diskdrake.pm_.c:467 msgid "Computing fat filesystem bounds" msgstr "" #: ../diskdrake.pm_.c:467 ../diskdrake.pm_.c:512 msgid "Resizing" msgstr "" #: ../diskdrake.pm_.c:481 msgid "resizing" msgstr "" #: ../diskdrake.pm_.c:491 msgid "Choose the new size" msgstr "" #: ../diskdrake.pm_.c:491 ../install_steps_gtk.pm_.c:287 #: ../install_steps_gtk.pm_.c:334 ../unused/install_steps_graphical.pm_.c:314 msgid "MB" msgstr "" #: ../diskdrake.pm_.c:542 msgid "Create a new partition" msgstr "" #: ../diskdrake.pm_.c:558 msgid "Start sector: " msgstr "" #: ../diskdrake.pm_.c:561 msgid "Size in MB: " msgstr "" #: ../diskdrake.pm_.c:564 msgid "Filesystem type: " msgstr "" #: ../diskdrake.pm_.c:566 msgid "Preference: " msgstr "" #: ../diskdrake.pm_.c:610 ../diskdrake.pm_.c:626 msgid "Select file" msgstr "" #: ../diskdrake.pm_.c:619 msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" #: ../diskdrake.pm_.c:627 msgid "Warning" msgstr "" #: ../diskdrake.pm_.c:628 msgid "" "Insert a floppy in drive\n" "All data on this floppy will be lost" msgstr "" #: ../diskdrake.pm_.c:642 msgid "Trying to rescue partition table" msgstr "" #: ../diskdrake.pm_.c:653 msgid "device" msgstr "" #: ../diskdrake.pm_.c:654 msgid "level" msgstr "" #: ../diskdrake.pm_.c:655 msgid "chunk size" msgstr "" #: ../diskdrake.pm_.c:667 msgid "Choose an existing RAID to add to" msgstr "" #: ../diskdrake.pm_.c:668 msgid "new" msgstr "" #: ../fs.pm_.c:67 ../fs.pm_.c:73 #, c-format msgid "%s formatting of %s failed" msgstr "" #: ../fs.pm_.c:93 #, c-format msgid "don't know how to format %s in type %s" msgstr "" #: ../fs.pm_.c:106 msgid "nfs mount failed" msgstr "" #: ../fs.pm_.c:123 msgid "mount failed: " msgstr "" #: ../fs.pm_.c:134 #, c-format msgid "error unmounting %s: %s" msgstr "" #: ../fsedit.pm_.c:185 msgid "Mount points must begin with a leading /" msgstr "" #: ../fsedit.pm_.c:188 #, c-format msgid "There is already a partition with mount point %s" msgstr "" #: ../fsedit.pm_.c:272 #, c-format msgid "Error opening %s for writing: %s" msgstr "" #: ../fsedit.pm_.c:344 msgid "" "An error has occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" #: ../fsedit.pm_.c:359 msgid "You don't have any partitions!" msgstr "" #: ../help.pm_.c:17 ../help.pm_.c:287 msgid "Choose preferred language for install and system usage." msgstr "" #: ../help.pm_.c:20 ../help.pm_.c:290 msgid "Choose the layout corresponding to your keyboard from the list above" msgstr "" #: ../help.pm_.c:23 msgid "" "Choose \"Install\" if there are no previous versions of Linux\n" "installed, or if you wish to use multiple distributions or versions.\n" "\n" "\n" "Choose \"Upgrade\" if you wish to update a previous version of Mandrake\n" "Linux: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen) or 6.0 (Venus)." msgstr "" #: ../help.pm_.c:31 msgid "" "Select:\n" "\n" " - Recommended: If you have never installed Linux before.\n" "\n" "\n" " - Customized: If you are familiar with Linux, you will be able to \n" "select the usage for the installed system between normal, development or\n" "server. Choose \"Normal\" for a general purpose installation of your\n" "computer. You may choose \"Development\" if you will be using the computer\n" "primarily for software development, or choose \"Server\" if you wish to\n" "install a general purpose server (for mail, printing...).\n" "\n" "\n" " - Expert: If you are fluent with GNU/Linux and want to perform\n" "a highly customized installation, this Install Class is for you. You will\n" "be able to select the usage of your installed system as for \"Customized\"." msgstr "" #: ../help.pm_.c:49 msgid "" "DrakX will attempt at first to look for one or more PCI\n" "SCSI adapter(s). If it finds it (or them) and knows which driver(s)\n" "to use, it will insert it (them) automatically.\n" "\n" "\n" "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n" "doesn't know which driver to use for this card, or if you have no\n" "SCSI adapters at all, you will then be prompted on whether you have\n" "one or not. If you have none, answer \"No\". If you have one or more,\n" "answer \"Yes\". A list of drivers will then pop up, from which you\n" "will have to select one.\n" "\n" "\n" "After you have selected the driver, DrakX will ask if you\n" "want to specify options for it. First, try and let the driver\n" "probe for the hardware: it usually works fine.\n" "\n" "\n" "If not, do not forget the information on your hardware that you\n" "could get from your documentation or from Windows (if you have it\n" "on your system), as suggested by the installation guide. These\n" "are the options you will need to provide to the driver." msgstr "" #: ../help.pm_.c:76 msgid "" "At this point, you may choose what partition(s) to use to install\n" "your Linux-Mandrake system if they have been already defined (from a\n" "previous install of Linux or from another partitionning tool). In other\n" "cases, hard drive partitions must be defined. This operation consists of\n" "logically dividing the computer's hard drive capacity into separate\n" "areas for use.\n" "\n" "\n" "If you have to create new partitions, use \"Auto allocate\" to " "automatically\n" "create partitions for Linux. You can select the disk for partitionning by\n" "clicking on \"hda\" for the first IDE drive,\n" "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n" "\n" "\n" "Two common partition are: the root partition (/), which is the starting\n" "point of the filesystem's directory hierarchy, and /boot, which contains\n" "all files necessary to start the operating system when the\n" "computer is first turned on.\n" "\n" "\n" "Because the effects of this process are usually irreversible, partitioning\n" "can be intimidating and stressful to the unexperienced user. DiskDrake\n" "simplifies the process so that it need not be. Consult the documentation\n" "and take your time before proceeding." msgstr "" #: ../help.pm_.c:102 ../help.pm_.c:362 msgid "" "Any partitions that have been newly defined must be formatted for\n" "use (formatting meaning creating a filesystem). At this time, you may\n" "wish to re-format some already existing partitions to erase the data\n" "they contain. Note: it is not necessary to re-format pre-existing\n" "partitions, particularly if they contain files or data you wish to keep.\n" "Typically retained are /home and /usr/local." msgstr "" #: ../help.pm_.c:110 msgid "" "You may now select the packages you wish to install.\n" "\n" "\n" "First you can select the size of your installed system and an automated\n" "selection of packages will be done according to your system usage. After\n" "that you can select more packages by group or click on Ok to keep the\n" "previous selection.\n" "\n" "\n" "If you are in expert mode, you can select packages individually.\n" "Please note that some packages require the installation of others.\n" "These are referred to as package dependencies. The packages you select,\n" "and the packages they require will be automatically selected for\n" "install. It is impossible to install a package without installing all\n" "of its dependencies.\n" "\n" "\n" "Information on each category and specific package is available in the\n" "area titled \"Info\", located between list of packages and the\n" "button \"Install\" to start the installation." msgstr "" #: ../help.pm_.c:132 msgid "" "The packages selected are now being installed. This operation\n" "should take a few minutes unless you have chosen to upgrade an\n" "existing system, in that case it can take more time even before\n" "upgrade starts." msgstr "" #: ../help.pm_.c:138 ../help.pm_.c:391 msgid "" "If DrakX failed to find your mouse, or if you want to\n" "check what it has done, you will be presented the list of mice\n" "above.\n" "\n" "\n" "If you agree with DrakX' settings, just jump to the section\n" "you want by clicking on it in the menu on the left. Otherwise,\n" "choose a mouse type in the menu which you think is the closest\n" "match for your mouse.\n" "\n" "In case of a serial mouse, you will also have to tell DrakX\n" "which serial port it is connected to." msgstr "" #: ../help.pm_.c:152 msgid "" "This section is dedicated to configuring a local area\n" "network (LAN) or a modem.\n" "\n" "Choose \"Local LAN\" and DrakX will\n" "try to find an Ethernet adapter on your machine. PCI adapters\n" "should be found and initialized automatically.\n" "However, if your peripheral is ISA, autodetection will not work,\n" "and you will have to choose a driver from the list that will appear then.\n" "\n" "\n" "As for SCSI adapters, you can let the driver probe for the adapter\n" "in the first time, otherwise you will have to specify the options\n" "to the driver that you will have fetched from Windows' control\n" "panel.\n" "\n" "\n" "If you install a Linux-Mandrake system on a machine which is part\n" "of an already existing network, the network administrator will\n" "have given you all necessary information (IP address, network\n" "submask or netmask for short, and hostname). If you're setting\n" "up a private network at home for example, you should choose\n" "addresses.\n" "\n" "\n" "Choose \"Dialup with modem\" and the Internet connection with\n" "a modem will be configured. DrakX will try to find your modem,\n" "if it fails you will have to select the right serial port where\n" "your modem is connected to." msgstr "" #: ../help.pm_.c:182 msgid "" "You can now select your timezone according to where you live.\n" "\n" "\n" "Linux manages time in GMT or \"Greenwich Meridian Time\" and translates it\n" "in local time according to the time zone you have selected." msgstr "" #: ../help.pm_.c:189 ../help.pm_.c:427 ../help.pm_.c:430 ../help.pm_.c:518 #: ../install2.pm_.c:68 msgid "Help" msgstr "" #: ../help.pm_.c:192 msgid "" "Linux can deal with many types of printer. Each of these\n" "types require a different setup.\n" "\n" "\n" "If your printer is directly connected to your computer, select\n" "\"Local printer\". You will then have to tell which port your\n" "printer is connected to, and select the appropriate filter.\n" "\n" "\n" "If you want to access a printer located on a remote Unix machine,\n" "you will have to select \"Remote lpd\". In order to make\n" "it work, no username or password is required, but you will need\n" "to know the name of the printing queue on this server.\n" "\n" "\n" "If you want to access a SMB printer (which means, a printer located\n" "on a remote Windows 9x/NT machine), you will have to specify its\n" "SMB name (which is not its TCP/IP name), and possibly its IP address,\n" "plus the username, workgroup and password required in order to\n" "access the printer, and of course the name of the printer. The same goes\n" "for a NetWare printer, except that you need no workgroup information." msgstr "" #: ../help.pm_.c:215 msgid "" "You can now enter the root password for your Linux-Mandrake\n" "system. The password must be entered twice to verify that both\n" "password entries are identical.\n" "\n" "\n" "Root is the administrator of the system, and is the only user\n" "allowed to modify the system configuration. Therefore, choose\n" "this password carefully! Unauthorized use of the root account can\n" "be extremely dangerous to the integrity of the system and its data,\n" "and other systems connected to it. The password should be a\n" "mixture of alphanumeric characters and a least 8 characters long. It\n" "should *never* be written down. Do not make the password too long or\n" "complicated, though: you must be able to remember without too much\n" "effort." msgstr "" #: ../help.pm_.c:231 ../help.pm_.c:472 msgid "" "You may now create one or more \"regular\" user account(s), as\n" "opposed to the \"priviledged\" user account, root. You can create\n" "one or more account(s) for each person you want to allow to use\n" "the computer. Note that each user account will have its own\n" "preferences (graphical environment, program settings, etc.)\n" "and its own \"home directory\", in which these preferences are\n" "stored.\n" "\n" "\n" "First of all, create an account for yourself! Even if you will be the only " "user\n" "of the machine, you may NOT connect as root for daily use of the system: " "it's a\n" "very high security risk. Making the system unusable is very often a typo " "away.\n" "\n" "\n" "Therefore, you should connect to the system using the user account\n" "you will have created here, and login as root only for administration\n" "and maintenance purposes." msgstr "" #: ../help.pm_.c:250 ../help.pm_.c:491 msgid "" "Please, please, answer \"Yes\" here! Just for example, when you\n" "reinstall Windows, it will overwrite the boot sector. Unless you have\n" "made the bootdisk as suggested, you won't be able to boot into Linux\n" "any more!" msgstr "" #: ../help.pm_.c:256 ../help.pm_.c:497 msgid "" "You need to indicate where you wish\n" "to place the information required to boot to Linux.\n" "\n" "\n" "Unless you know exactly what you are doing, choose \"First sector of\n" "drive (MBR)\"." msgstr "" #: ../help.pm_.c:264 ../help.pm_.c:505 msgid "" "Now it's time to configure the X Window System, which is the\n" "core of the Linux GUI (Graphical User Interface). For this purpose,\n" "you must configure your video card and monitor. Most of these\n" "steps are automated, though, therefore your work may only consist\n" "of verifying what has been done and accept the settings :)\n" "\n" "\n" "When the configuration is over, X will be started (unless you\n" "ask DrakX not to) so that you can check and see if the\n" "settings suit you. If they don't, you can come back and\n" "change them, as many times as necessary." msgstr "" #: ../help.pm_.c:277 msgid "You can now select some miscellaneous options for your system." msgstr "" #: ../help.pm_.c:280 msgid "Exit Linux-Mandrake installation to reboot your system." msgstr "" #: ../help.pm_.c:293 msgid "" "Choose \"Installation\" if there are no previous versions of Linux\n" "installed, or if you wish to use multiple distributions or versions.\n" "\n" "\n" "Choose \"Update\" if you wish to update a previous version of Mandrake\n" "Linux: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen) or 6.0 (Venus)." msgstr "" #: ../help.pm_.c:301 msgid "" "Select:\n" "\n" " - Beginner: If you have never installed Linux before, and wish to\n" "install the distribution elected \"Product of the year\" for 1999,\n" "click here.\n" "\n" " - Developer: If you are familiar with Linux and will be using the\n" "computer primarily for software development, you will find happiness\n" "here.\n" "\n" " - Server: If you wish to install a general purpose server, or the\n" "Linux distribution elected \"Distribution/Server\" for 1999, select\n" "this.\n" "\n" " - Expert: If you are fluent with GNU/Linux and want to perform\n" "a highly customized installation, this Install Class is for you." msgstr "" #: ../help.pm_.c:319 msgid "" "DrakX will attempt at first to look for one or more PCI\n" "SCSI adapter(s). If it finds it (or them) and knows which driver(s)\n" "to use, it will insert it (them) automatically.\n" "\n" "If your SCSI adapter is ISA, or is PCI but DrakX doesn't know\n" "which driver to use for this card, or if you have no SCSI adapters\n" "at all, you will then be prompted on whether you have one or not.\n" "If you have none, answer \"No\". If you have one or more, answer\n" "\"Yes\". A list of drivers will then pop up, from which you will\n" "have to select one.\n" "\n" "After you have selected the driver, DrakX will ask if you\n" "want to specify options for it. First, try and let the driver\n" "probe for the hardware: it usually works fine.\n" "\n" "If not, do not forget the information on your hardware that you\n" "could get from you documentation or from Windows (if you have\n" "it on your system), as suggested by the installation guide.\n" "These are the options you will need to provide to the driver." msgstr "" #: ../help.pm_.c:340 msgid "" "In this stage, you may choose what partition(s) use to install your\n" "Linux-Mandrake system." msgstr "" #: ../help.pm_.c:370 msgid "" "You may now select the packages you wish to install.\n" "\n" "\n" "Please note that some packages require the installation of others.\n" "These are referred to as package dependencies. The packages you select,\n" "and the packages they require will be automatically selected for\n" "install. It is impossible to install a package without installing all\n" "of its dependencies.\n" "\n" "\n" "Information on each category and specific package is available in the\n" "area titled \"Info\", located between list of packages and the five\n" "buttons \"Install\", \"Select more/less\" and \"Show more/less\"." msgstr "" #: ../help.pm_.c:385 msgid "" "The packages selected are now being installed.\n" "\n" "\n" "This operation should take a few minutes." msgstr "" #: ../help.pm_.c:405 msgid "" "This section is dedicated to configuring a local area network,\n" "or LAN. If you answer \"Yes\" here, DrakX will try to find an\n" "Ethernet adapter on your machine. PCI adapters should be found and\n" "initialized automatically. However, if your peripheral is ISA,\n" "autodetection will not work, and you will have to choose a driver\n" "from the list that will appear then.\n" "\n" "\n" "As for SCSI adapters, you can let the driver probe for the adapter\n" "in the first time, otherwise you will have to specify the options\n" "to the driver that you will have fetched from Windows' control\n" "panel.\n" "\n" "\n" "If you install a Linux-Mandrake system on a machine which is part\n" "of an already existing network, the network administrator will\n" "have given you all necessary information (IP address, network\n" "submask or netmask for short, and hostname). If you're setting\n" "up a private network at home for example, you should choose\n" "addresses " msgstr "" #: ../help.pm_.c:433 msgid "" "Linux can deal with many types of printer. Each of these\n" "types require a different setup.\n" "\n" "\n" "If your printer is directly connected to your computer, select\n" "\"Local printer\". You will then have to tell which port your\n" "printer is connected to, and select the appropriate filter.\n" "\n" "\n" "If you want to access a printer located on a remote Unix machine,\n" "you will have to select \"Remote lpd queue\". In order to make\n" "it work, no username or password is required, but you will need\n" "to know the name of the printing queue on this server.\n" "\n" "\n" "If you want to access a SMB printer (which means, a printer located\n" "on a remote Windows 9x/NT machine), you will have to specify its\n" "SMB name (which is not its TCP/IP name), and possibly its IP address,\n" "plus the username, workgroup and password required in order to\n" "access the printer, and of course the name of the printer.The same goes\n" "for a NetWare printer, except that you need no workgroup information." msgstr "" #: ../help.pm_.c:456 msgid "" "You must now enter the root password for your Linux-Mandrake\n" "system. The password must be entered twice to verify that both\n" "password entries are identical.\n" "\n" "\n" "Root is the administrator of the system, and is the only user\n" "allowed to modify the system configuration. Therefore, choose\n" "this password carefully! Unauthorized use of the root account can\n" "be extremely dangerous to the integrity of the system and its data,\n" "and other systems connected to it. The password should be a\n" "mixture of alphanumeric characters and a least 8 characters long. It\n" "should *never* be written down. Do not make the password too long or\n" "complicated, though: you must be able to remember without too much\n" "effort." msgstr "" #: ../install2.pm_.c:41 msgid "Choose your language" msgstr "" #: ../install2.pm_.c:42 msgid "Select installation class" msgstr "" #: ../install2.pm_.c:43 msgid "Setup SCSI" msgstr "" #: ../install2.pm_.c:44 msgid "Choose install or upgrade" msgstr "" #: ../install2.pm_.c:45 msgid "Configure mouse" msgstr "" #: ../install2.pm_.c:46 msgid "Choose your keyboard" msgstr "" #: ../install2.pm_.c:47 msgid "Setup filesystems" msgstr "" #: ../install2.pm_.c:48 msgid "Format partitions" msgstr "" #: ../install2.pm_.c:49 msgid "Choose packages to install" msgstr "" #: ../install2.pm_.c:50 msgid "Install system" msgstr "" #: ../install2.pm_.c:51 msgid "Miscellaneous" msgstr "" #: ../install2.pm_.c:52 msgid "Configure networking" msgstr "" #: ../install2.pm_.c:53 msgid "Configure timezone" msgstr "" #: ../install2.pm_.c:55 msgid "Configure printer" msgstr "" #: ../install2.pm_.c:56 ../install_steps_interactive.pm_.c:632 #: ../install_steps_interactive.pm_.c:633 msgid "Set root password" msgstr "" #: ../install2.pm_.c:57 msgid "Add a user" msgstr "" #: ../install2.pm_.c:58 msgid "Create a bootdisk" msgstr "" #: ../install2.pm_.c:59 msgid "Install bootloader" msgstr "" #: ../install2.pm_.c:60 msgid "Configure X" msgstr "" #: ../install2.pm_.c:61 msgid "Exit install" msgstr "" #: ../install2.pm_.c:85 msgid "beginner" msgstr "" #: ../install2.pm_.c:85 msgid "developer" msgstr "" #: ../install2.pm_.c:85 msgid "expert" msgstr "" #: ../install2.pm_.c:85 msgid "server" msgstr "" #: ../install2.pm_.c:304 msgid "Partitioning failed: no root filesystem" msgstr "" #: ../install2.pm_.c:318 msgid "Not enough swap to fulfill installation, please add some" msgstr "" #: ../install_any.pm_.c:174 msgid "" "I can't read your partition table, it's too corrupted for me :(\n" "I'll try to go on blanking bad partitions" msgstr "" #: ../install_any.pm_.c:190 msgid "" "DiskDrake failed to read correctly the partition table.\n" "Continue at your own risk!" msgstr "" #: ../install_any.pm_.c:200 msgid "Searching root partition." msgstr "" #: ../install_any.pm_.c:231 msgid "Information" msgstr "" #: ../install_any.pm_.c:232 #, c-format msgid "%s: This is not a root partition, please select another one." msgstr "" #: ../install_any.pm_.c:234 msgid "No root partition found" msgstr "" #: ../install_any.pm_.c:270 msgid "Can't use broadcast with no NIS domain" msgstr "" #: ../install_any.pm_.c:425 msgid "Error reading file $f" msgstr "" #: ../install_any.pm_.c:431 #, c-format msgid "Bad kickstart file %s (failed %s)" msgstr "" #: ../install_steps.pm_.c:74 msgid "" "An error occurred, but I don't know how to handle it nicely.\n" "Continue at your own risk." msgstr "" #: ../install_steps.pm_.c:138 #, c-format msgid "Duplicate mount point %s" msgstr "" #: ../install_steps.pm_.c:430 msgid "No floppy drive available" msgstr "" #: ../install_steps_auto_install.pm_.c:18 ../install_steps_stdio.pm_.c:26 #, c-format msgid "Entering step `%s'\n" msgstr "" #: ../install_steps_gtk.pm_.c:259 ../unused/install_steps_graphical.pm_.c:255 msgid "You must have a swap partition" msgstr "" #: ../install_steps_gtk.pm_.c:261 ../unused/install_steps_graphical.pm_.c:258 msgid "" "You don't have a swap partition\n" "\n" "Continue anyway?" msgstr "" #: ../install_steps_gtk.pm_.c:287 msgid "Choose the size you want to install" msgstr "" #: ../install_steps_gtk.pm_.c:334 ../unused/install_steps_graphical.pm_.c:314 msgid "Total size: " msgstr "" #: ../install_steps_gtk.pm_.c:346 ../unused/install_steps_graphical.pm_.c:284 #, c-format msgid "Version: %s\n" msgstr "" #: ../install_steps_gtk.pm_.c:347 ../unused/install_steps_graphical.pm_.c:285 #, c-format msgid "Size: %d KB\n" msgstr "" #: ../install_steps_gtk.pm_.c:462 ../unused/install_steps_graphical.pm_.c:421 msgid "Choose the packages you want to install" msgstr "" #: ../install_steps_gtk.pm_.c:465 ../unused/install_steps_graphical.pm_.c:424 msgid "Info" msgstr "" #: ../install_steps_gtk.pm_.c:473 ../install_steps_interactive.pm_.c:87 #: ../unused/install_steps_graphical.pm_.c:432 msgid "Install" msgstr "" #: ../install_steps_gtk.pm_.c:492 ../install_steps_interactive.pm_.c:252 #: ../unused/install_steps_graphical.pm_.c:451 msgid "Installing" msgstr "" #: ../install_steps_gtk.pm_.c:499 ../unused/install_steps_graphical.pm_.c:457 msgid "Please wait, " msgstr "" #: ../install_steps_gtk.pm_.c:501 ../unused/install_steps_graphical.pm_.c:459 msgid "Time remaining " msgstr "" #: ../install_steps_gtk.pm_.c:502 ../unused/install_steps_graphical.pm_.c:460 msgid "Total time " msgstr "" #: ../install_steps_gtk.pm_.c:507 ../install_steps_interactive.pm_.c:252 #: ../unused/install_steps_graphical.pm_.c:465 msgid "Preparing installation" msgstr "" #: ../install_steps_gtk.pm_.c:517 #, c-format msgid "%d packages" msgstr "" #: ../install_steps_gtk.pm_.c:517 msgid ", %U bytes" msgstr "" #: ../install_steps_gtk.pm_.c:522 ../unused/install_steps_graphical.pm_.c:486 #, c-format msgid "Installing package %s" msgstr "" #: ../install_steps_gtk.pm_.c:547 ../unused/install_steps_graphical.pm_.c:511 msgid "Go on anyway?" msgstr "" #: ../install_steps_gtk.pm_.c:547 ../unused/install_steps_graphical.pm_.c:511 msgid "There was an error ordering packages:" msgstr "" #: ../install_steps_interactive.pm_.c:43 msgid "An error occurred" msgstr "" #: ../install_steps_interactive.pm_.c:60 msgid "Which language do you want?" msgstr "" #: ../install_steps_interactive.pm_.c:75 msgid "What is your keyboard layout?" msgstr "" #: ../install_steps_interactive.pm_.c:85 msgid "Install/Upgrade" msgstr "" #: ../install_steps_interactive.pm_.c:86 msgid "Is this an install or an upgrade?" msgstr "" #: ../install_steps_interactive.pm_.c:87 msgid "Upgrade" msgstr "" #: ../install_steps_interactive.pm_.c:95 msgid "Root Partition" msgstr "" #: ../install_steps_interactive.pm_.c:96 msgid "What is the root partition (/) of your system?" msgstr "" #: ../install_steps_interactive.pm_.c:106 msgid "Recommended" msgstr "" #: ../install_steps_interactive.pm_.c:107 msgid "Customized" msgstr "" #: ../install_steps_interactive.pm_.c:108 msgid "Expert" msgstr "" #: ../install_steps_interactive.pm_.c:110 #: ../install_steps_interactive.pm_.c:124 msgid "Install Class" msgstr "" #: ../install_steps_interactive.pm_.c:111 msgid "What installation class do you want?" msgstr "" #: ../install_steps_interactive.pm_.c:120 msgid "Normal" msgstr "" #: ../install_steps_interactive.pm_.c:121 msgid "Developement" msgstr "" #: ../install_steps_interactive.pm_.c:122 msgid "Server" msgstr "" #: ../install_steps_interactive.pm_.c:125 msgid "What usage do you want?" msgstr "" #: ../install_steps_interactive.pm_.c:138 msgid "What is the type of your mouse?" msgstr "" #: ../install_steps_interactive.pm_.c:141 msgid "Emulate third button?" msgstr "" #: ../install_steps_interactive.pm_.c:144 msgid "Mouse Port" msgstr "" #: ../install_steps_interactive.pm_.c:145 msgid "Which serial port is your mouse connected to?" msgstr "" #: ../install_steps_interactive.pm_.c:160 msgid "no available partitions" msgstr "" #: ../install_steps_interactive.pm_.c:162 #, c-format msgid "(%dMb)" msgstr "" #: ../install_steps_interactive.pm_.c:169 msgid "Which partition do you want to use as your root partition" msgstr "" #: ../install_steps_interactive.pm_.c:176 msgid "Choose the mount points" msgstr "" #: ../install_steps_interactive.pm_.c:188 msgid "You need to reboot for the partition table modifications to take place" msgstr "" #: ../install_steps_interactive.pm_.c:207 msgid "Choose the partitions you want to format" msgstr "" #: ../install_steps_interactive.pm_.c:226 msgid "Looking for available packages" msgstr "" #: ../install_steps_interactive.pm_.c:232 msgid "Finding packages to upgrade" msgstr "" #: ../install_steps_interactive.pm_.c:241 msgid "Package Group Selection" msgstr "" #: ../install_steps_interactive.pm_.c:261 msgid "" "Installing package %s\n" "%d%%" msgstr "" #: ../install_steps_interactive.pm_.c:270 msgid "Post install stuff" msgstr "" #: ../install_steps_interactive.pm_.c:281 msgid "Keep the current IP configuration" msgstr "" #: ../install_steps_interactive.pm_.c:282 msgid "Reconfigure network now" msgstr "" #: ../install_steps_interactive.pm_.c:283 #: ../install_steps_interactive.pm_.c:295 msgid "Do not set up networking" msgstr "" #: ../install_steps_interactive.pm_.c:285 #: ../install_steps_interactive.pm_.c:293 msgid "Network Configuration" msgstr "" #: ../install_steps_interactive.pm_.c:286 msgid "Local networking has already been configured. Do you want to:" msgstr "" #: ../install_steps_interactive.pm_.c:294 msgid "Do you want to configure networking for yout system?" msgstr "" #: ../install_steps_interactive.pm_.c:295 msgid "Dialup with modem" msgstr "" #: ../install_steps_interactive.pm_.c:295 msgid "Local LAN" msgstr "" #: ../install_steps_interactive.pm_.c:304 msgid "no network card found" msgstr "" #: ../install_steps_interactive.pm_.c:333 #, c-format msgid "Configuring network device %s" msgstr "" #: ../install_steps_interactive.pm_.c:334 msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" #: ../install_steps_interactive.pm_.c:337 msgid "Automatic IP" msgstr "" #: ../install_steps_interactive.pm_.c:337 msgid "IP address:" msgstr "" #: ../install_steps_interactive.pm_.c:337 msgid "Netmask:" msgstr "" #: ../install_steps_interactive.pm_.c:338 msgid "(bootp/dhcp)" msgstr "" #: ../install_steps_interactive.pm_.c:344 #: ../install_steps_interactive.pm_.c:511 msgid "IP address should be in format 1.2.3.4" msgstr "" #: ../install_steps_interactive.pm_.c:363 msgid "Configuring network" msgstr "" #: ../install_steps_interactive.pm_.c:364 msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one" msgstr "" #: ../install_steps_interactive.pm_.c:368 msgid "DNS server:" msgstr "" #: ../install_steps_interactive.pm_.c:368 msgid "Gateway device:" msgstr "" #: ../install_steps_interactive.pm_.c:368 msgid "Gateway:" msgstr "" #: ../install_steps_interactive.pm_.c:368 msgid "Host name:" msgstr "" #: ../install_steps_interactive.pm_.c:381 msgid "Try to find a modem?" msgstr "" #: ../install_steps_interactive.pm_.c:390 msgid "Which serial port is your modem connected to?" msgstr "" #: ../install_steps_interactive.pm_.c:394 msgid "Dialup options" msgstr "" #: ../install_steps_interactive.pm_.c:395 msgid "Connection name" msgstr "" #: ../install_steps_interactive.pm_.c:396 msgid "Phone number" msgstr "" #: ../install_steps_interactive.pm_.c:397 msgid "Login ID" msgstr "" #: ../install_steps_interactive.pm_.c:398 #: ../install_steps_interactive.pm_.c:634 #: ../install_steps_interactive.pm_.c:680 #: ../install_steps_interactive.pm_.c:771 msgid "Password" msgstr "" #: ../install_steps_interactive.pm_.c:399 msgid "Authentication" msgstr "" #: ../install_steps_interactive.pm_.c:399 msgid "CHAP" msgstr "" #: ../install_steps_interactive.pm_.c:399 msgid "PAP" msgstr "" #: ../install_steps_interactive.pm_.c:399 msgid "Script-based" msgstr "" #: ../install_steps_interactive.pm_.c:399 msgid "Terminal-based" msgstr "" #: ../install_steps_interactive.pm_.c:400 msgid "Domain name" msgstr "" #: ../install_steps_interactive.pm_.c:401 msgid "First DNS Server" msgstr "" #: ../install_steps_interactive.pm_.c:402 msgid "Second DNS Server" msgstr "" #: ../install_steps_interactive.pm_.c:413 msgid "Which is your timezone?" msgstr "" #: ../install_steps_interactive.pm_.c:414 msgid "Is your hardware clock set to GMT?" msgstr "" #: ../install_steps_interactive.pm_.c:424 msgid "Printer" msgstr "" #: ../install_steps_interactive.pm_.c:425 msgid "Would you like to configure a printer?" msgstr "" #: ../install_steps_interactive.pm_.c:437 msgid "Local Printer Options" msgstr "" #: ../install_steps_interactive.pm_.c:438 msgid "" "Every print queue (which print jobs are directed to) needs a\n" "name (often lp) and a spool directory associated with it. What\n" "name and directory should be used for this queue?" msgstr "" #: ../install_steps_interactive.pm_.c:441 msgid "Name of queue:" msgstr "" #: ../install_steps_interactive.pm_.c:441 msgid "Spool directory:" msgstr "" #: ../install_steps_interactive.pm_.c:452 msgid "Select Printer Connection" msgstr "" #: ../install_steps_interactive.pm_.c:453 msgid "How is the printer connected?" msgstr "" #: ../install_steps_interactive.pm_.c:461 msgid "Detecting devices..." msgstr "" #: ../install_steps_interactive.pm_.c:461 msgid "Test ports" msgstr "" #: ../install_steps_interactive.pm_.c:474 #, c-format msgid "A printer, model \"%s\", has been detected on " msgstr "" #: ../install_steps_interactive.pm_.c:481 msgid "Local Printer Device" msgstr "" #: ../install_steps_interactive.pm_.c:482 msgid "" "What device is your printer connected to \n" "(note that /dev/lp0 is equivalent to LPT1:)?\n" msgstr "" #: ../install_steps_interactive.pm_.c:483 msgid "Printer Device:" msgstr "" #: ../install_steps_interactive.pm_.c:487 msgid "Remote lpd Printer Options" msgstr "" #: ../install_steps_interactive.pm_.c:488 msgid "" "To use a remote lpd print queue, you need to supply\n" "the hostname of the printer server and the queue name\n" "on that server which jobs should be placed in." msgstr "" #: ../install_steps_interactive.pm_.c:491 msgid "Remote hostname:" msgstr "" #: ../install_steps_interactive.pm_.c:491 msgid "Remote queue" msgstr "" #: ../install_steps_interactive.pm_.c:496 msgid "SMB (Windows 9x/NT) Printer Options" msgstr "" #: ../install_steps_interactive.pm_.c:497 msgid "" "To print to a SMB printer, you need to provide the\n" "SMB host name (Note! It may be different from its\n" "TCP/IP hostname!) and possibly the IP address of the print server, as\n" "well as the share name for the printer you wish to access and any\n" "applicable user name, password, and workgroup information." msgstr "" #: ../install_steps_interactive.pm_.c:502 msgid "SMB server IP:" msgstr "" #: ../install_steps_interactive.pm_.c:502 msgid "SMB server host:" msgstr "" #: ../install_steps_interactive.pm_.c:503 #: ../install_steps_interactive.pm_.c:525 msgid "Password:" msgstr "" #: ../install_steps_interactive.pm_.c:503 msgid "Share name:" msgstr "" #: ../install_steps_interactive.pm_.c:503 #: ../install_steps_interactive.pm_.c:525 msgid "User name:" msgstr "" #: ../install_steps_interactive.pm_.c:504 msgid "Workgroup:" msgstr "" #: ../install_steps_interactive.pm_.c:519 msgid "NetWare Printer Options" msgstr "" #: ../install_steps_interactive.pm_.c:520 msgid "" "To print to a NetWare printer, you need to provide the\n" "NetWare print server name (Note! it may be different from its\n" "TCP/IP hostname!) as well as the print queue name for the printer you\n" "wish to access and any applicable user name and password." msgstr "" #: ../install_steps_interactive.pm_.c:524 msgid "Print Queue Name:" msgstr "" #: ../install_steps_interactive.pm_.c:524 msgid "Printer Server:" msgstr "" #: ../install_steps_interactive.pm_.c:535 msgid "Yes, print ASCII test page" msgstr "" #: ../install_steps_interactive.pm_.c:536 msgid "Yes, print PostScript test page" msgstr "" #: ../install_steps_interactive.pm_.c:537 msgid "Yes, print both test pages" msgstr "" #: ../install_steps_interactive.pm_.c:538 #: ../install_steps_interactive.pm_.c:1062 ../interactive.pm_.c:63 #: ../my_gtk.pm_.c:437 msgid "No" msgstr "" #: ../install_steps_interactive.pm_.c:544 msgid "Configure Printer" msgstr "" #: ../install_steps_interactive.pm_.c:545 msgid "What type of printer do you have?" msgstr "" #: ../install_steps_interactive.pm_.c:567 msgid "Printer options" msgstr "" #: ../install_steps_interactive.pm_.c:568 msgid "Paper Size" msgstr "" #: ../install_steps_interactive.pm_.c:569 msgid "Eject page after job?" msgstr "" #: ../install_steps_interactive.pm_.c:572 msgid "Fix stair-stepping text?" msgstr "" #: ../install_steps_interactive.pm_.c:575 msgid "Uniprint driver options" msgstr "" #: ../install_steps_interactive.pm_.c:576 msgid "Color depth options" msgstr "" #: ../install_steps_interactive.pm_.c:585 msgid "Do you want to test printing?" msgstr "" #: ../install_steps_interactive.pm_.c:614 #, c-format msgid "" "Is this correct? Printing status:\n" "%s" msgstr "" #: ../install_steps_interactive.pm_.c:632 msgid "No password" msgstr "" #: ../install_steps_interactive.pm_.c:632 #: ../install_steps_interactive.pm_.c:842 ../interactive.pm_.c:58 #: ../interactive.pm_.c:68 ../interactive.pm_.c:147 #: ../interactive_newt.pm_.c:46 ../interactive_newt.pm_.c:90 #: ../interactive_stdio.pm_.c:27 ../my_gtk.pm_.c:200 ../my_gtk.pm_.c:438 #: ../my_gtk.pm_.c:537 ../unused/install_steps_graphical.pm_.c:608 msgid "Ok" msgstr "" #: ../install_steps_interactive.pm_.c:635 #: ../install_steps_interactive.pm_.c:681 msgid "Password (again)" msgstr "" #: ../install_steps_interactive.pm_.c:637 msgid "Use shadow file" msgstr "" #: ../install_steps_interactive.pm_.c:637 msgid "shadow" msgstr "" #: ../install_steps_interactive.pm_.c:638 msgid "MD5" msgstr "" #: ../install_steps_interactive.pm_.c:638 msgid "Use MD5 passwords" msgstr "" #: ../install_steps_interactive.pm_.c:640 msgid "Use NIS" msgstr "" #: ../install_steps_interactive.pm_.c:640 msgid "yellow pages" msgstr "" #: ../install_steps_interactive.pm_.c:644 #: ../install_steps_interactive.pm_.c:692 msgid "Please try again" msgstr "" #: ../install_steps_interactive.pm_.c:644 #: ../install_steps_interactive.pm_.c:692 msgid "The passwords do not match" msgstr "" #: ../install_steps_interactive.pm_.c:646 #: ../install_steps_interactive.pm_.c:693 msgid "This password is too simple" msgstr "" #: ../install_steps_interactive.pm_.c:653 msgid "Authentification NIS" msgstr "" #: ../install_steps_interactive.pm_.c:654 msgid "NIS Domain" msgstr "" #: ../install_steps_interactive.pm_.c:654 msgid "NIS Server" msgstr "" #: ../install_steps_interactive.pm_.c:674 msgid "Accept user" msgstr "" #: ../install_steps_interactive.pm_.c:674 msgid "Add user" msgstr "" #: ../install_steps_interactive.pm_.c:675 #, c-format msgid "(already added %s)" msgstr "" #: ../install_steps_interactive.pm_.c:675 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" #: ../install_steps_interactive.pm_.c:677 msgid "Real name" msgstr "" #: ../install_steps_interactive.pm_.c:678 msgid "User name" msgstr "" #: ../install_steps_interactive.pm_.c:683 msgid "Shell" msgstr "" #: ../install_steps_interactive.pm_.c:694 msgid "Please give a user name" msgstr "" #: ../install_steps_interactive.pm_.c:695 msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "" #: ../install_steps_interactive.pm_.c:696 msgid "This user name is already added" msgstr "" #: ../install_steps_interactive.pm_.c:717 msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "LILO on your system, or another operating system removes LILO, or LILO " "doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures. Would you like to create a bootdisk for your system?" msgstr "" #: ../install_steps_interactive.pm_.c:726 msgid "Sorry, no floppy drive available" msgstr "" #: ../install_steps_interactive.pm_.c:729 msgid "Choose the floppy drive you want to use to make the bootdisk" msgstr "" #: ../install_steps_interactive.pm_.c:730 msgid "Skip" msgstr "" #: ../install_steps_interactive.pm_.c:734 #, c-format msgid "Insert a floppy in drive %s" msgstr "" #: ../install_steps_interactive.pm_.c:735 msgid "Creating bootdisk" msgstr "" #: ../install_steps_interactive.pm_.c:742 msgid "Preparing bootloader" msgstr "" #: ../install_steps_interactive.pm_.c:754 msgid "First sector of boot partition" msgstr "" #: ../install_steps_interactive.pm_.c:754 msgid "First sector of drive (MBR)" msgstr "" #: ../install_steps_interactive.pm_.c:758 msgid "LILO Installation" msgstr "" #: ../install_steps_interactive.pm_.c:759 msgid "Where do you want to install the bootloader?" msgstr "" #: ../install_steps_interactive.pm_.c:762 msgid "Do you want to use LILO?" msgstr "" #: ../install_steps_interactive.pm_.c:765 msgid "Boot device" msgstr "" #: ../install_steps_interactive.pm_.c:766 msgid "Linear (needed for some SCSI drives)" msgstr "" #: ../install_steps_interactive.pm_.c:766 msgid "linear" msgstr "" #: ../install_steps_interactive.pm_.c:767 msgid "Compact" msgstr "" #: ../install_steps_interactive.pm_.c:767 msgid "compact" msgstr "" #: ../install_steps_interactive.pm_.c:768 msgid "Delay before booting default image" msgstr "" #: ../install_steps_interactive.pm_.c:769 msgid "Video mode" msgstr "" #: ../install_steps_interactive.pm_.c:772 msgid "Restrict command line options" msgstr "" #: ../install_steps_interactive.pm_.c:772 msgid "restrict" msgstr "" #: ../install_steps_interactive.pm_.c:778 msgid "LILO main options" msgstr "" #: ../install_steps_interactive.pm_.c:781 msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "" #: ../install_steps_interactive.pm_.c:790 msgid "" "Here are the following entries in LILO.\n" "You can add some more or change the existent ones." msgstr "" #: ../install_steps_interactive.pm_.c:792 msgid "Add" msgstr "" #: ../install_steps_interactive.pm_.c:801 msgid "Linux" msgstr "" #: ../install_steps_interactive.pm_.c:801 msgid "Other OS (windows...)" msgstr "" #: ../install_steps_interactive.pm_.c:801 msgid "Which type of entry do you want to add" msgstr "" #: ../install_steps_interactive.pm_.c:821 msgid "Image" msgstr "" #: ../install_steps_interactive.pm_.c:822 #: ../install_steps_interactive.pm_.c:830 msgid "Root" msgstr "" #: ../install_steps_interactive.pm_.c:823 msgid "Append" msgstr "" #: ../install_steps_interactive.pm_.c:824 msgid "Initrd" msgstr "" #: ../install_steps_interactive.pm_.c:825 msgid "Read-write" msgstr "" #: ../install_steps_interactive.pm_.c:831 msgid "Table" msgstr "" #: ../install_steps_interactive.pm_.c:832 msgid "Unsafe" msgstr "" #: ../install_steps_interactive.pm_.c:837 msgid "Label" msgstr "" #: ../install_steps_interactive.pm_.c:839 msgid "Default" msgstr "" #: ../install_steps_interactive.pm_.c:842 msgid "Remove entry" msgstr "" #: ../install_steps_interactive.pm_.c:845 msgid "Empty label not allowed" msgstr "" #: ../install_steps_interactive.pm_.c:846 msgid "This label is already in use" msgstr "" #: ../install_steps_interactive.pm_.c:847 #, c-format msgid "A entry %s already exists" msgstr "" #: ../install_steps_interactive.pm_.c:861 msgid "Installation of LILO failed. The following error occured:" msgstr "" #: ../install_steps_interactive.pm_.c:873 msgid "Proxies configuration" msgstr "" #: ../install_steps_interactive.pm_.c:874 msgid "HTTP proxy" msgstr "" #: ../install_steps_interactive.pm_.c:875 msgid "FTP proxy" msgstr "" #: ../install_steps_interactive.pm_.c:881 msgid "Proxy should be http://..." msgstr "" #: ../install_steps_interactive.pm_.c:882 msgid "Proxy should be ftp://..." msgstr "" #: ../install_steps_interactive.pm_.c:892 msgid "Windows(TM)" msgstr "" #: ../install_steps_interactive.pm_.c:893 msgid "Poor" msgstr "" #: ../install_steps_interactive.pm_.c:894 msgid "Low" msgstr "" #: ../install_steps_interactive.pm_.c:895 msgid "Medium" msgstr "" #: ../install_steps_interactive.pm_.c:896 msgid "High" msgstr "" #: ../install_steps_interactive.pm_.c:897 msgid "Paranoid" msgstr "" #: ../install_steps_interactive.pm_.c:907 msgid "Miscellaneous questions" msgstr "" #: ../install_steps_interactive.pm_.c:908 msgid "Is this machine a laptop?" msgstr "" #: ../install_steps_interactive.pm_.c:909 msgid "Use hard drive optimisations?" msgstr "" #: ../install_steps_interactive.pm_.c:910 msgid "Choose security level" msgstr "" #: ../install_steps_interactive.pm_.c:911 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "" #: ../install_steps_interactive.pm_.c:914 msgid "(may cause data corruption)" msgstr "" #: ../install_steps_interactive.pm_.c:919 msgid "Give the ram size in Mb" msgstr "" #: ../install_steps_interactive.pm_.c:934 #: ../unused/install_steps_graphical.pm_.c:535 msgid "Use existing configuration for X11?" msgstr "" #: ../install_steps_interactive.pm_.c:959 msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" #: ../install_steps_interactive.pm_.c:966 msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "For information on fixes which are available for this release of " "Linux-Mandrake,\n" "consult the Errata available from http://www.linux-mandrake.com/.\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Linux-Mandrake User's Guide." msgstr "" #: ../install_steps_interactive.pm_.c:987 #, c-format msgid "Installing driver for %s card %s" msgstr "" #: ../install_steps_interactive.pm_.c:988 #, c-format msgid "(module %s)" msgstr "" #: ../install_steps_interactive.pm_.c:998 #, c-format msgid "Which %s driver should I try?" msgstr "" #: ../install_steps_interactive.pm_.c:1005 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" #: ../install_steps_interactive.pm_.c:1010 msgid "Autoprobe" msgstr "" #: ../install_steps_interactive.pm_.c:1010 msgid "Specify options" msgstr "" #: ../install_steps_interactive.pm_.c:1014 #, c-format msgid "You may now provide its options to module %s." msgstr "" #: ../install_steps_interactive.pm_.c:1020 #, c-format msgid "" "You may now provide its options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" #: ../install_steps_interactive.pm_.c:1023 msgid "Module options:" msgstr "" #: ../install_steps_interactive.pm_.c:1033 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" #: ../install_steps_interactive.pm_.c:1046 msgid "Try to find PCMCIA cards?" msgstr "" #: ../install_steps_interactive.pm_.c:1047 msgid "Configuring PCMCIA cards..." msgstr "" #: ../install_steps_interactive.pm_.c:1047 msgid "PCMCIA" msgstr "" #: ../install_steps_interactive.pm_.c:1054 msgid "Try to find PCI devices?" msgstr "" #: ../install_steps_interactive.pm_.c:1058 #, c-format msgid "Found %s %s interfaces" msgstr "" #: ../install_steps_interactive.pm_.c:1059 msgid "Do you have another one?" msgstr "" #: ../install_steps_interactive.pm_.c:1060 #, c-format msgid "Do you have any %s interface?" msgstr "" #: ../install_steps_interactive.pm_.c:1062 ../interactive.pm_.c:63 #: ../my_gtk.pm_.c:437 msgid "Yes" msgstr "" #: ../install_steps_interactive.pm_.c:1063 msgid "See hardware info" msgstr "" #: ../install_steps_newt.pm_.c:19 #, c-format msgid "Linux-Mandrake Installation %s" msgstr "" #: ../install_steps_newt.pm_.c:30 msgid "" " / between elements | selects | next screen " msgstr "" #: ../interactive.pm_.c:68 ../interactive.pm_.c:146 #: ../interactive_newt.pm_.c:46 ../interactive_newt.pm_.c:90 #: ../interactive_stdio.pm_.c:27 ../my_gtk.pm_.c:201 ../my_gtk.pm_.c:438 msgid "Cancel" msgstr "" #: ../interactive.pm_.c:164 msgid "Please wait" msgstr "" #: ../interactive_stdio.pm_.c:35 #, c-format msgid "Ambiguity (%s), be more precise\n" msgstr "" #: ../interactive_stdio.pm_.c:36 ../interactive_stdio.pm_.c:51 #: ../interactive_stdio.pm_.c:70 msgid "Bad choice, try again\n" msgstr "" #: ../interactive_stdio.pm_.c:39 #, c-format msgid " ? (default %s) " msgstr "" #: ../interactive_stdio.pm_.c:52 #, c-format msgid "Your choice? (default %s) " msgstr "" #: ../interactive_stdio.pm_.c:71 #, c-format msgid "Your choice? (default %s enter `none' for none) " msgstr "" #: ../keyboard.pm_.c:32 msgid "Belgian" msgstr "" #: ../keyboard.pm_.c:33 msgid "Bulgarian" msgstr "" #: ../keyboard.pm_.c:35 msgid "Czech" msgstr "" #: ../keyboard.pm_.c:36 msgid "German" msgstr "" #: ../keyboard.pm_.c:37 msgid "Danish" msgstr "" #: ../keyboard.pm_.c:38 msgid "Dvorak" msgstr "" #: ../keyboard.pm_.c:41 msgid "Spanish" msgstr "" #: ../keyboard.pm_.c:42 msgid "Finnish" msgstr "" #: ../keyboard.pm_.c:43 msgid "French" msgstr "" #: ../keyboard.pm_.c:48 msgid "Greek" msgstr "" #: ../keyboard.pm_.c:50 msgid "Hungarian" msgstr "" #: ../keyboard.pm_.c:52 msgid "Israeli" msgstr "" #: ../keyboard.pm_.c:53 msgid "Icelandic" msgstr "" #: ../keyboard.pm_.c:55 msgid "Italian" msgstr "" #: ../keyboard.pm_.c:56 msgid "Latin American" msgstr "" #: ../keyboard.pm_.c:58 msgid "Dutch" msgstr "" #: ../keyboard.pm_.c:62 msgid "Norwegian" msgstr "" #: ../keyboard.pm_.c:64 msgid "Polish" msgstr "" #: ../keyboard.pm_.c:65 msgid "Portuguese" msgstr "" #: ../keyboard.pm_.c:68 msgid "Russian" msgstr "" #: ../keyboard.pm_.c:69 msgid "Swedish" msgstr "" #: ../keyboard.pm_.c:71 msgid "Swiss (French layout)" msgstr "" #: ../keyboard.pm_.c:72 msgid "Swiss (German layout)" msgstr "" #: ../keyboard.pm_.c:77 msgid "Turkish (traditional \"F\" model)" msgstr "" #: ../keyboard.pm_.c:78 msgid "Turkish (modern \"Q\" model)" msgstr "" #: ../keyboard.pm_.c:80 msgid "UK keyboard" msgstr "" #: ../keyboard.pm_.c:82 msgid "US keyboard" msgstr "" #: ../lilo.pm_.c:139 #, c-format msgid "" "Welcome to LILO the operating system chooser!\n" "\n" "To list the possible choices, press .\n" "\n" "To load one of them, write its name and press or wait %d seconds for " "default boot.\n" "\n" msgstr "" #: ../mouse.pm_.c:21 msgid "No Mouse" msgstr "" #: ../mouse.pm_.c:22 msgid "Microsoft Rev 2.1A or higher (serial)" msgstr "" #: ../mouse.pm_.c:23 msgid "Logitech CC Series (serial)" msgstr "" #: ../mouse.pm_.c:24 msgid "Logitech MouseMan+/FirstMouse+ (serial)" msgstr "" #: ../mouse.pm_.c:25 msgid "ASCII MieMouse (serial)" msgstr "" #: ../mouse.pm_.c:26 msgid "Genius NetMouse (serial)" msgstr "" #: ../mouse.pm_.c:27 msgid "Microsoft IntelliMouse (serial)" msgstr "" #: ../mouse.pm_.c:28 msgid "MM Series (serial)" msgstr "" #: ../mouse.pm_.c:29 msgid "MM HitTablet (serial)" msgstr "" #: ../mouse.pm_.c:30 msgid "Logitech Mouse (serial, old C7 type)" msgstr "" #: ../mouse.pm_.c:31 msgid "Logitech MouseMan/FirstMouse (serial)" msgstr "" #: ../mouse.pm_.c:32 msgid "Generic Mouse (serial)" msgstr "" #: ../mouse.pm_.c:33 msgid "Microsoft compatible (serial)" msgstr "" #: ../mouse.pm_.c:34 msgid "Generic 3 Button Mouse (serial)" msgstr "" #: ../mouse.pm_.c:35 msgid "Mouse Systems (serial)" msgstr "" #: ../mouse.pm_.c:36 msgid "Generic Mouse (PS/2)" msgstr "" #: ../mouse.pm_.c:37 msgid "Logitech MouseMan/FirstMouse (ps/2)" msgstr "" #: ../mouse.pm_.c:38 msgid "Generic 3 Button Mouse (PS/2)" msgstr "" #: ../mouse.pm_.c:39 msgid "ALPS GlidePoint (PS/2)" msgstr "" #: ../mouse.pm_.c:40 msgid "Logitech MouseMan+/FirstMouse+ (PS/2)" msgstr "" #: ../mouse.pm_.c:41 msgid "Kensington Thinking Mouse (PS/2)" msgstr "" #: ../mouse.pm_.c:42 msgid "ASCII MieMouse (PS/2)" msgstr "" #: ../mouse.pm_.c:43 msgid "Genius NetMouse (PS/2)" msgstr "" #: ../mouse.pm_.c:44 msgid "Genius NetMouse Pro (PS/2)" msgstr "" #: ../mouse.pm_.c:45 msgid "Genius NetScroll (PS/2)" msgstr "" #: ../mouse.pm_.c:46 msgid "Microsoft IntelliMouse (PS/2)" msgstr "" #: ../mouse.pm_.c:47 msgid "ATI Bus Mouse" msgstr "" #: ../mouse.pm_.c:48 msgid "Microsoft Bus Mouse" msgstr "" #: ../mouse.pm_.c:49 msgid "Logitech Bus Mouse" msgstr "" #: ../mouse.pm_.c:50 msgid "USB Mouse" msgstr "" #: ../mouse.pm_.c:51 msgid "USB Mouse (3 buttons or more)" msgstr "" #: ../partition_table.pm_.c:463 msgid "" "You have a hole in your partition table but I can't use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions" msgstr "" #: ../partition_table.pm_.c:549 #, c-format msgid "Error reading file %s" msgstr "" #: ../partition_table.pm_.c:556 #, c-format msgid "Restoring from file %s failed: %s" msgstr "" #: ../partition_table.pm_.c:558 msgid "Bad backup file" msgstr "" #: ../partition_table.pm_.c:578 #, c-format msgid "Error writing to file %s" msgstr "" #: ../printer.pm_.c:244 msgid "Local printer" msgstr "" #: ../printer.pm_.c:245 msgid "Remote lpd" msgstr "" #: ../printer.pm_.c:246 msgid "SMB/Windows 95/98/NT" msgstr "" #: ../printer.pm_.c:247 msgid "NetWare" msgstr "" #: ../raid.pm_.c:36 #, c-format msgid "Can't add a partition to _formatted_ RAID md%d" msgstr "" #: ../raid.pm_.c:108 msgid "Can't write file $file" msgstr "" #: ../raid.pm_.c:145 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "" #: ../unused/install_steps_graphical.pm_.c:433 msgid "Show less" msgstr "" #: ../unused/install_steps_graphical.pm_.c:434 msgid "Show more" msgstr ""