# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR Free Software Foundation, Inc.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"POT-Creation-Date: 1999-11-17 17:21+0100\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=CHARSET\n"
"Content-Transfer-Encoding: ENCODING\n"

#: ../Xconfigurator.pm_.c:158
msgid "Select a graphic card"
msgstr ""

#: ../Xconfigurator.pm_.c:159
msgid "Choose a X server"
msgstr ""

#: ../Xconfigurator.pm_.c:178
msgid "Select the memory size of your graphic card"
msgstr ""

#: ../Xconfigurator.pm_.c:200
msgid "Choose options for server"
msgstr ""

#: ../Xconfigurator.pm_.c:218
msgid "Choose a monitor"
msgstr ""

#: ../Xconfigurator.pm_.c:221
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""

#: ../Xconfigurator.pm_.c:228
msgid "Horizontal refresh rate"
msgstr ""

#: ../Xconfigurator.pm_.c:228
msgid "Vertical refresh rate"
msgstr ""

#: ../Xconfigurator.pm_.c:269
msgid "Monitor not configured"
msgstr ""

#: ../Xconfigurator.pm_.c:272
msgid "Graphic card not configured yet"
msgstr ""

#: ../Xconfigurator.pm_.c:275
msgid "Resolutions not chosen yet"
msgstr ""

#: ../Xconfigurator.pm_.c:284
msgid "Do you want to test the configuration?"
msgstr ""

#: ../Xconfigurator.pm_.c:284
msgid "Test configuration"
msgstr ""

#: ../Xconfigurator.pm_.c:316
msgid "An error occurred:"
msgstr ""

#: ../Xconfigurator.pm_.c:318
msgid ""
"\n"
"try changing some parameters"
msgstr ""

#: ../Xconfigurator.pm_.c:339
#, c-format
msgid "(leaving in %d seconds)"
msgstr ""

#: ../Xconfigurator.pm_.c:343 ../install_steps_interactive.pm_.c:599
#: ../my_gtk.pm_.c:438
msgid "Is this correct?"
msgstr ""

#: ../Xconfigurator.pm_.c:351
msgid "An error occurred, try changing some parameters"
msgstr ""

#: ../Xconfigurator.pm_.c:359 ../Xconfigurator.pm_.c:524
msgid "Automatic resolutions"
msgstr ""

#: ../Xconfigurator.pm_.c:360
msgid ""
"To find the available resolutions I will try different ones.\n"
"Your screen will blink...\n"
"You can switch if off if you want, you'll hear a beep when it's over"
msgstr ""

#: ../Xconfigurator.pm_.c:411 ../install_steps_interactive.pm_.c:564
msgid "Resolution"
msgstr ""

#: ../Xconfigurator.pm_.c:446
msgid "Choose resolution and color depth"
msgstr ""

#: ../Xconfigurator.pm_.c:454
msgid "Show all"
msgstr ""

#: ../Xconfigurator.pm_.c:525
msgid ""
"I can try to find the available resolutions (eg: 800x600).\n"
"Sometimes, though, it may hang the machine.\n"
"Do you want to try?"
msgstr ""

#: ../Xconfigurator.pm_.c:530
msgid ""
"No valid modes found\n"
"Try with another video card or monitor"
msgstr ""

#: ../Xconfigurator.pm_.c:721
#, c-format
msgid "Keyboard layout: %s\n"
msgstr ""

#: ../Xconfigurator.pm_.c:722
#, c-format
msgid "Mouse type: %s\n"
msgstr ""

#: ../Xconfigurator.pm_.c:723
#, c-format
msgid "Mouse device: %s\n"
msgstr ""

#: ../Xconfigurator.pm_.c:724
#, c-format
msgid "Monitor: %s\n"
msgstr ""

#: ../Xconfigurator.pm_.c:725
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr ""

#: ../Xconfigurator.pm_.c:726
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr ""

#: ../Xconfigurator.pm_.c:727
#, c-format
msgid "Graphic card: %s\n"
msgstr ""

#: ../Xconfigurator.pm_.c:728
#, c-format
msgid "Graphic memory: %s kB\n"
msgstr ""

#: ../Xconfigurator.pm_.c:729
#, c-format
msgid "XFree86 server: %s\n"
msgstr ""

#: ../Xconfigurator.pm_.c:743
msgid "Preparing X-Window configuration"
msgstr ""

#: ../Xconfigurator.pm_.c:757
msgid "Change Monitor"
msgstr ""

#: ../Xconfigurator.pm_.c:758
msgid "Change Graphic card"
msgstr ""

#: ../Xconfigurator.pm_.c:759
msgid "Change Server options"
msgstr ""

#: ../Xconfigurator.pm_.c:760
msgid "Change Resolution"
msgstr ""

#: ../Xconfigurator.pm_.c:761
msgid "Automatical resolutions search"
msgstr ""

#: ../Xconfigurator.pm_.c:765
msgid "Show information"
msgstr ""

#: ../Xconfigurator.pm_.c:766
msgid "Test again"
msgstr ""

#: ../Xconfigurator.pm_.c:767
msgid "Quit"
msgstr ""

#: ../Xconfigurator.pm_.c:770
msgid "What do you want to do?"
msgstr ""

#: ../Xconfigurator.pm_.c:777
msgid "X at startup"
msgstr ""

#: ../Xconfigurator.pm_.c:778
msgid ""
"I can set up your computer to automatically start X upon booting.\n"
"Would you like X to start when you reboot?"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:4
msgid "256 colors (8 bits)"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:5
msgid "32 thousand colors (15 bits)"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:6
msgid "65 thousand colors (16 bits)"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:7
msgid "16 million colors (24 bits)"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:8
msgid "4 billion colors (32 bits)"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:101
msgid "256 kB"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:102
msgid "512 kB"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:103
msgid "1 MB"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:104
msgid "2 MB"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:105
msgid "4 MB"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:106
msgid "8 MB"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:107
msgid "16 MB or more"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:111 ../Xconfigurator_consts.pm_.c:112
msgid "Standard VGA, 640x480 at 60 Hz"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:113
msgid "Super VGA, 800x600 at 56 Hz"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:114
msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:115
msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:116
msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:117
msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:118
msgid "High Frequency SVGA, 1024x768 at 70 Hz"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:119
msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:120
msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:121
msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:122
msgid "Monitor that can do 1600x1200 at 70 Hz"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:123
msgid "Monitor that can do 1600x1200 at 76 Hz"
msgstr ""

#: ../diskdrake.pm_.c:16
msgid "Create"
msgstr ""

#: ../diskdrake.pm_.c:17
msgid "Unmount"
msgstr ""

#: ../diskdrake.pm_.c:18
msgid "Delete"
msgstr ""

#: ../diskdrake.pm_.c:18
msgid "Format"
msgstr ""

#: ../diskdrake.pm_.c:18 ../diskdrake.pm_.c:425
msgid "Move"
msgstr ""

#: ../diskdrake.pm_.c:18 ../diskdrake.pm_.c:484
msgid "Resize"
msgstr ""

#: ../diskdrake.pm_.c:18 ../diskdrake.pm_.c:367
msgid "Type"
msgstr ""

#: ../diskdrake.pm_.c:19 ../diskdrake.pm_.c:387
msgid "Mount point"
msgstr ""

#: ../diskdrake.pm_.c:33
msgid "Write /etc/fstab"
msgstr ""

#: ../diskdrake.pm_.c:34
msgid "Normal > Expert"
msgstr ""

#: ../diskdrake.pm_.c:35
msgid "Expert > Normal"
msgstr ""

#: ../diskdrake.pm_.c:36
msgid "Restore from file"
msgstr ""

#: ../diskdrake.pm_.c:37
msgid "Save in file"
msgstr ""

#: ../diskdrake.pm_.c:38
msgid "Restore from floppy"
msgstr ""

#: ../diskdrake.pm_.c:39
msgid "Save on floppy"
msgstr ""

#: ../diskdrake.pm_.c:40 ../install_steps_interactive.pm_.c:656
#: ../install_steps_interactive.pm_.c:774
msgid "Done"
msgstr ""

#: ../diskdrake.pm_.c:43
msgid "Clear all"
msgstr ""

#: ../diskdrake.pm_.c:44
msgid "Format all"
msgstr ""

#: ../diskdrake.pm_.c:45
msgid "Auto allocate"
msgstr ""

#: ../diskdrake.pm_.c:48
msgid "All primary partitions are used"
msgstr ""

#: ../diskdrake.pm_.c:48
msgid "I can't add any more partition"
msgstr ""

#: ../diskdrake.pm_.c:48
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""

#: ../diskdrake.pm_.c:51
msgid "Rescue partition table"
msgstr ""

#: ../diskdrake.pm_.c:52
msgid "Undo"
msgstr ""

#: ../diskdrake.pm_.c:53
msgid "Write partition table"
msgstr ""

#: ../diskdrake.pm_.c:54
msgid "Reload"
msgstr ""

#: ../diskdrake.pm_.c:100
msgid "Filesystem types:"
msgstr ""

#: ../diskdrake.pm_.c:104
msgid "Empty"
msgstr ""

#: ../diskdrake.pm_.c:104
msgid "Ext2"
msgstr ""

#: ../diskdrake.pm_.c:104
msgid "FAT"
msgstr ""

#: ../diskdrake.pm_.c:104
msgid "Other"
msgstr ""

#: ../diskdrake.pm_.c:104
msgid "Swap"
msgstr ""

#: ../diskdrake.pm_.c:107
msgid "Choose action"
msgstr ""

#: ../diskdrake.pm_.c:109
msgid "Details"
msgstr ""

#: ../diskdrake.pm_.c:134
#, c-format
msgid "After %s partition %s,"
msgstr ""

#: ../diskdrake.pm_.c:134 ../diskdrake.pm_.c:415 ../diskdrake.pm_.c:444
msgid "Read carefully!"
msgstr ""

#: ../diskdrake.pm_.c:134
msgid "all data on this partition will be lost"
msgstr ""

#: ../diskdrake.pm_.c:153 ../install_any.pm_.c:173 ../install_steps.pm_.c:73
#: ../install_steps_interactive.pm_.c:43
msgid "Error"
msgstr ""

#: ../diskdrake.pm_.c:177 ../diskdrake.pm_.c:562
msgid "Mount point: "
msgstr ""

#: ../diskdrake.pm_.c:178 ../diskdrake.pm_.c:210
msgid "Device: "
msgstr ""

#: ../diskdrake.pm_.c:179
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr ""

#: ../diskdrake.pm_.c:180 ../diskdrake.pm_.c:213
msgid "Type: "
msgstr ""

#: ../diskdrake.pm_.c:181
#, c-format
msgid "Start: sector %s\n"
msgstr ""

#: ../diskdrake.pm_.c:182
#, c-format
msgid "Size: %s MB"
msgstr ""

#: ../diskdrake.pm_.c:184
#, c-format
msgid ", %s sectors"
msgstr ""

#: ../diskdrake.pm_.c:186
#, c-format
msgid "Cylinder %d to cylinder %d\n"
msgstr ""

#: ../diskdrake.pm_.c:187
msgid "Formatted\n"
msgstr ""

#: ../diskdrake.pm_.c:188
msgid "Not formatted\n"
msgstr ""

#: ../diskdrake.pm_.c:189
msgid "Mounted\n"
msgstr ""

#: ../diskdrake.pm_.c:190
#, c-format
msgid "RAID md%s\n"
msgstr ""

#: ../diskdrake.pm_.c:191
msgid ""
"Partition booted by default\n"
"    (for MS-DOS boot, not for lilo)\n"
msgstr ""

#: ../diskdrake.pm_.c:193
#, c-format
msgid "Level %s\n"
msgstr ""

#: ../diskdrake.pm_.c:194
#, c-format
msgid "Chunk size %s\n"
msgstr ""

#: ../diskdrake.pm_.c:195
#, c-format
msgid "RAID-disks %s\n"
msgstr ""

#: ../diskdrake.pm_.c:211
#, c-format
msgid "Size: %d MB\n"
msgstr ""

#: ../diskdrake.pm_.c:212
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr ""

#: ../diskdrake.pm_.c:214
#, c-format
msgid "on bus %d id %d\n"
msgstr ""

#: ../diskdrake.pm_.c:226
msgid "Mount"
msgstr ""

#: ../diskdrake.pm_.c:228
msgid "Active"
msgstr ""

#: ../diskdrake.pm_.c:229
msgid "Add to RAID"
msgstr ""

#: ../diskdrake.pm_.c:230
msgid "Remove from RAID"
msgstr ""

#: ../diskdrake.pm_.c:231
msgid "Modify RAID"
msgstr ""

#: ../diskdrake.pm_.c:327
msgid ""
"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
"1024).\n"
"Either you use LILO and it won't work, or you don't use LILO and you don't "
"need /boot"
msgstr ""

#: ../diskdrake.pm_.c:331
msgid ""
"The partition you've selected to add as root (/) is physically located "
"beyond\n"
"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
"If you plan to use the LILO boot manager, be careful to add a /boot partition"
msgstr ""

#: ../diskdrake.pm_.c:346
msgid "Quit without saving"
msgstr ""

#: ../diskdrake.pm_.c:346
msgid "Quit without writing the partition table?"
msgstr ""

#: ../diskdrake.pm_.c:362
msgid "changing type of"
msgstr ""

#: ../diskdrake.pm_.c:365
msgid "Change partition type"
msgstr ""

#: ../diskdrake.pm_.c:366
msgid "Which partition type do you want?"
msgstr ""

#: ../diskdrake.pm_.c:386
#, c-format
msgid "Where do you want to mount device %s?"
msgstr ""

#: ../diskdrake.pm_.c:408
msgid "formatting"
msgstr ""

#: ../diskdrake.pm_.c:410
msgid "Formatting"
msgstr ""

#: ../diskdrake.pm_.c:410 ../install_steps_interactive.pm_.c:216
#, c-format
msgid "Formatting partition %s"
msgstr ""

#: ../diskdrake.pm_.c:415
msgid "After formatting all partitions,"
msgstr ""

#: ../diskdrake.pm_.c:415
msgid "all data on these partitions will be lost"
msgstr ""

#: ../diskdrake.pm_.c:426
msgid "Which disk do you want to move to?"
msgstr ""

#: ../diskdrake.pm_.c:430
msgid "Sector"
msgstr ""

#: ../diskdrake.pm_.c:431
msgid "Which sector do you want to move to?"
msgstr ""

#: ../diskdrake.pm_.c:434
msgid "Moving"
msgstr ""

#: ../diskdrake.pm_.c:434
msgid "Moving partition..."
msgstr ""

#: ../diskdrake.pm_.c:444
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr ""

#: ../diskdrake.pm_.c:446
msgid "You'll need to reboot before the modification can take place"
msgstr ""

#: ../diskdrake.pm_.c:467
msgid "Computing fat filesystem bounds"
msgstr ""

#: ../diskdrake.pm_.c:467 ../diskdrake.pm_.c:512
msgid "Resizing"
msgstr ""

#: ../diskdrake.pm_.c:481
msgid "resizing"
msgstr ""

#: ../diskdrake.pm_.c:491
msgid "Choose the new size"
msgstr ""

#: ../diskdrake.pm_.c:491 ../install_steps_graphical.pm_.c:287
#: ../install_steps_graphical.pm_.c:334 ../install_steps_gtk.pm_.c:287
#: ../install_steps_gtk.pm_.c:334
msgid "MB"
msgstr ""

#: ../diskdrake.pm_.c:539
msgid "Create a new partition"
msgstr ""

#: ../diskdrake.pm_.c:555
msgid "Start sector: "
msgstr ""

#: ../diskdrake.pm_.c:558
msgid "Size in MB: "
msgstr ""

#: ../diskdrake.pm_.c:561
msgid "Filesystem type: "
msgstr ""

#: ../diskdrake.pm_.c:563
msgid "Preference: "
msgstr ""

#: ../diskdrake.pm_.c:607 ../diskdrake.pm_.c:623
msgid "Select file"
msgstr ""

#: ../diskdrake.pm_.c:616
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""

#: ../diskdrake.pm_.c:624
msgid "Warning"
msgstr ""

#: ../diskdrake.pm_.c:625
msgid ""
"Insert a floppy in drive\n"
"All data on this floppy will be lost"
msgstr ""

#: ../diskdrake.pm_.c:639
msgid "Trying to rescue partition table"
msgstr ""

#: ../diskdrake.pm_.c:650
msgid "device"
msgstr ""

#: ../diskdrake.pm_.c:651
msgid "level"
msgstr ""

#: ../diskdrake.pm_.c:652
msgid "chunk size"
msgstr ""

#: ../diskdrake.pm_.c:664
msgid "Choose an existing RAID to add to"
msgstr ""

#: ../diskdrake.pm_.c:665
msgid "new"
msgstr ""

#: ../fs.pm_.c:67 ../fs.pm_.c:73
#, c-format
msgid "%s formatting of %s failed"
msgstr ""

#: ../fs.pm_.c:93
#, c-format
msgid "don't know how to format %s in type %s"
msgstr ""

#: ../fs.pm_.c:106
msgid "nfs mount failed"
msgstr ""

#: ../fs.pm_.c:123
msgid "mount failed: "
msgstr ""

#: ../fs.pm_.c:134
#, c-format
msgid "error unmounting %s: %s"
msgstr ""

#: ../fsedit.pm_.c:186
msgid "Mount points must begin with a leading /"
msgstr ""

#: ../fsedit.pm_.c:189
#, c-format
msgid "There is already a partition with mount point %s"
msgstr ""

#: ../fsedit.pm_.c:273
#, c-format
msgid "Error opening %s for writing: %s"
msgstr ""

#: ../fsedit.pm_.c:345
msgid ""
"An error has occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""

#: ../fsedit.pm_.c:360
msgid "You don't have any partitions!"
msgstr ""

#: ../help.pm_.c:17 ../help.pm_.c:287
msgid "Choose preferred language for install and system usage."
msgstr ""

#: ../help.pm_.c:20 ../help.pm_.c:290
msgid "Choose the layout corresponding to your keyboard from the list above"
msgstr ""

#: ../help.pm_.c:23
msgid ""
"Choose \"Install\" if there are no previous versions of Linux\n"
"nstalled, or if you wish use to multiple distributions or versions.\n"
"\n"
"\n"
"Choose \"Upgrade\" if you wish to update a previous version of Mandrake\n"
"Linux: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen) or 6.0 (Venus)."
msgstr ""

#: ../help.pm_.c:31
msgid ""
"Select:\n"
"\n"
"  - Recommended: If you have never installed Linux before.\n"
"\n"
"\n"
"  - Customized: If you are familiar with Linux, you will be able to \n"
"select the usage for the installed system between normal, development or\n"
"server. Choose \"Normal\" for a general purpose installation of your\n"
"computer. You may choose \"Development\" if you will be using the computer\n"
"primarily for software development, or choose \"Server\" if you wish to\n"
"install a general purpose server (for mail, printing...).\n"
"\n"
"\n"
"  - Expert: If you are fluent with GNU/Linux and want to perform\n"
"a highly customized installation, this Install Class is for you. You will\n"
"be able to select the usage of your installed system as for \"Customized\"."
msgstr ""

#: ../help.pm_.c:49
msgid ""
"DrakX will attempt at first to look for one or more PCI\n"
"SCSI adapter(s). If it finds it (or them)  and knows which driver(s)\n"
"to use, it will insert it (them)  automatically.\n"
"\n"
"\n"
"If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
"doesn't know which driver to use for this card, or if you have no\n"
"SCSI adapters at all, you will then be prompted on whether you have\n"
"one or not. If you have none, answer \"No\". If you have one or more,\n"
"answer \"Yes\". A list of drivers will then pop up, from which you\n"
"will have to select one.\n"
"\n"
"\n"
"After you have selected the driver, DrakX will ask if you\n"
"want to specify options for it. First, try and let the driver\n"
"probe for the hardware: it usually works fine.\n"
"\n"
"\n"
"If not, do not forget the information on your hardware that you\n"
"could get from your documentation or from Windows (if you have it\n"
"on your system), as suggested by the installation guide. These\n"
"are the options you will need to provide to the driver."
msgstr ""

#: ../help.pm_.c:76
msgid ""
"At this point, you may choose what partition(s) to use to install\n"
"your Linux-Mandrake system if they have been already defined (from a\n"
"previous install of Linux or from another partitionning tool). In other\n"
"cases, hard drive partitions must be defined. This operation consists of\n"
"logically dividing the computer's hard drive capacity into separate\n"
"areas for use.\n"
"\n"
"\n"
"If you have to create new partitions, use \"Auto allocate\" to "
"automatically\n"
"create partitions for Linux. You can select the disk for partitionning by\n"
"clicking on \"hda\" for the first IDE drive,\n"
"\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
"\n"
"\n"
"Two common partition are: the root partition (/), which is the starting\n"
"point of the filesystem's directory hierarchy, and /boot, which contains\n"
"all files necessary to start the operating system when the\n"
"computer is first turned on.\n"
"\n"
"\n"
"Because the effects of this process are usually irreversible, partitioning\n"
"can be intimidating and stressful to the unexperienced user. DiskDrake\n"
"simplifies the process so that it need not be. Consult the documentation\n"
"and take your time before proceeding."
msgstr ""

#: ../help.pm_.c:102 ../help.pm_.c:362
msgid ""
"Any partitions that have been newly defined must be formatted for\n"
"use (formatting meaning creating a filesystem). At this time, you may\n"
"wish to re-format some already existing partitions to erase the data\n"
"they contain. Note: it is not necessary to re-format pre-existing\n"
"partitions, particularly if they contain files or data you wish to keep.\n"
"Typically retained are /home and /usr/local."
msgstr ""

#: ../help.pm_.c:110
msgid ""
"You may now select the packages you wish to install.\n"
"\n"
"\n"
"First you can select the size of your installed system and an automated\n"
"selection of packages will be done according to your system usage. After\n"
"that you can select more packages by group or click on Ok to keep the\n"
"previous selection.\n"
"\n"
"\n"
"If you are in expert mode, you can select packages individually.\n"
"Please note that some packages require the installation of others.\n"
"These are referred to as package dependencies. The packages you select,\n"
"and the packages they require will be automatically selected for\n"
"install. It is impossible to install a package without installing all\n"
"of its dependencies.\n"
"\n"
"\n"
"Information on each category and specific package is available in the\n"
"area titled \"Info\",  located between list of packages and the\n"
"button \"Install\" to start the installation."
msgstr ""

#: ../help.pm_.c:132
msgid ""
"The packages selected are now being installed. This operation\n"
"should take a few minutes unless you have chosen to upgrade an\n"
"existing system, in that case it can take more time even before\n"
"upgrade starts."
msgstr ""

#: ../help.pm_.c:138 ../help.pm_.c:391
msgid ""
"If DrakX failed to find your mouse, or if you want to\n"
"check what it has done, you will be presented the list of mice\n"
"above.\n"
"\n"
"\n"
"If you agree with DrakX' settings, just jump to the section\n"
"you want by clicking on it in the menu on the left. Otherwise,\n"
"choose a mouse type in the menu which you think is the closest\n"
"match for your mouse.\n"
"\n"
"In case of a serial mouse, you will also have to tell DrakX\n"
"which serial port it is connected to."
msgstr ""

#: ../help.pm_.c:152
msgid ""
"This section is dedicated to configuring a local area\n"
"network (LAN) or a modem.\n"
"\n"
"Choose \"Local LAN\" and DrakX will\n"
"try to find an Ethernet adapter on your machine. PCI adapters\n"
"should be found and initialized automatically.\n"
"However, if your peripheral is ISA, autodetection will not work,\n"
"and you will have to choose a driver from the list that will appear then.\n"
"\n"
"\n"
"As for SCSI adapters, you can let the driver probe for the adapter\n"
"in the first time, otherwise you will have to specify the options\n"
"to the driver that you will have fetched from Windows' control\n"
"panel.\n"
"\n"
"\n"
"If you install a Linux-Mandrake system on a machine which is part\n"
"of an already existing network, the network administrator will\n"
"have given you all necessary information (IP address, network\n"
"submask or netmask for short, and hostname). If you're setting\n"
"up a private network at home for example, you should choose\n"
"addresses.\n"
"\n"
"\n"
"Choose \"Dialup with modem\" and the Internet connection with\n"
"a modem will be configured. DrakX will try to find your modem,\n"
"if it fails you will have to select the right serial port where\n"
"your modem is connected to."
msgstr ""

#: ../help.pm_.c:182
msgid ""
"You can now select your timezone according to where you live.\n"
"\n"
"\n"
"Linux manages time in GMT or \"Greenwich Meridian Time\" and translates it\n"
"in local time according to the time zone you have selected."
msgstr ""

#: ../help.pm_.c:189 ../help.pm_.c:427 ../help.pm_.c:430 ../help.pm_.c:518
#: ../install2.pm_.c:68
msgid "Help"
msgstr ""

#: ../help.pm_.c:192
msgid ""
"Linux can deal with many types of printer. Each of these\n"
"types require a different setup.\n"
"\n"
"\n"
"If your printer is directly connected to your computer, select\n"
"\"Local printer\". You will then have to tell which port your\n"
"printer is connected to, and select the appropriate filter.\n"
"\n"
"\n"
"If you want to access a printer located on a remote Unix machine,\n"
"you will have to select \"Remote lpd\". In order to make\n"
"it work, no username or password is required, but you will need\n"
"to know the name of the printing queue on this server.\n"
"\n"
"\n"
"If you want to access a SMB printer (which means, a printer located\n"
"on a remote Windows 9x/NT machine), you will have to specify its\n"
"SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
"plus the username, workgroup and password required in order to\n"
"access the printer, and of course the name of the printer. The same goes\n"
"for a NetWare printer, except that you need no workgroup information."
msgstr ""

#: ../help.pm_.c:215
msgid ""
"You can now enter the root password for your Linux-Mandrake\n"
"system. The password must be entered twice to verify that both\n"
"password entries are identical.\n"
"\n"
"\n"
"Root is the administrator of the system, and is the only user\n"
"allowed to modify the system configuration. Therefore, choose\n"
"this password carefully! Unauthorized use of the root account can\n"
"be extremely dangerous to the integrity of the system and its data,\n"
"and other systems connected to it. The password should be a\n"
"mixture of alphanumeric characters and a least 8 characters long. It\n"
"should *never* be written down. Do not make the password too long or\n"
"complicated, though: you must be able to remember without too much\n"
"effort."
msgstr ""

#: ../help.pm_.c:231 ../help.pm_.c:472
msgid ""
"You may now create one or more \"regular\" user account(s), as\n"
"opposed to the \"priviledged\" user account, root. You can create\n"
"one or more account(s) for each person you want to allow to use\n"
"the computer. Note that each user account will have its own\n"
"preferences (graphical environment, program settings, etc.)\n"
"and its own \"home directory\", in which these preferences are\n"
"stored.\n"
"\n"
"\n"
"First of all, create an account for yourself! Even if you will be the only "
"user\n"
"of the machine, you may NOT connect as root for daily use of the system: "
"it's a\n"
"very high security risk. Making the system unusable is very often a typo "
"away.\n"
"\n"
"\n"
"Therefore, you should connect to the system using the user account\n"
"you will have created here, and login as root only for administration\n"
"and maintenance purposes."
msgstr ""

#: ../help.pm_.c:250 ../help.pm_.c:491
msgid ""
"Please, please, answer \"Yes\" here! Just for example, when you\n"
"reinstall Windows, it will overwrite the boot sector. Unless you have\n"
"made the bootdisk as suggested, you won't be able to boot into Linux\n"
"any more!"
msgstr ""

#: ../help.pm_.c:256 ../help.pm_.c:497
msgid ""
"You need to indicate where you wish\n"
"to place the information required to boot to Linux.\n"
"\n"
"\n"
"Unless you know exactly what you are doing, choose \"First sector of\n"
"drive (MBR)\"."
msgstr ""

#: ../help.pm_.c:264 ../help.pm_.c:505
msgid ""
"Now it's time to configure the X Window System, which is the\n"
"core of the Linux GUI (Graphical User Interface). For this purpose,\n"
"you must configure your video card and monitor. Most of these\n"
"steps are automated, though, therefore your work may only consist\n"
"of verifying what has been done and accept the settings :)\n"
"\n"
"\n"
"When the configuration is over, X will be started (unless you\n"
"ask DrakX not to) so that you can check and see if the\n"
"settings suit you. If they don't, you can come back and\n"
"change them, as many times as necessary."
msgstr ""

#: ../help.pm_.c:277
msgid "You can now select some miscellaneous options for your system."
msgstr ""

#: ../help.pm_.c:280
msgid "Exit Linux-Mandrake installation to reboot your system."
msgstr ""

#: ../help.pm_.c:293
msgid ""
"Choose \"Installation\" if there are no previous versions of Linux\n"
"installed, or if you wish use to multiple distributions or versions.\n"
"\n"
"\n"
"Choose \"Update\" if you wish to update a previous version of Mandrake\n"
"Linux: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen) or 6.0 (Venus)."
msgstr ""

#: ../help.pm_.c:301
msgid ""
"Select:\n"
"\n"
"  - Beginner: If you have never installed Linux before, and wish to\n"
"install the distribution elected \"Product of the year\" for 1999,\n"
"click here.\n"
"\n"
"  - Developer: If you are familiar with Linux and will be using the\n"
"computer primarily for software development, you will find happiness\n"
"here.\n"
"\n"
"  - Server: If you wish to install a general purpose server, or the\n"
"Linux distribution elected \"Distribution/Server\" for 1999, select\n"
"this.\n"
"\n"
"  - Expert: If you are fluent with GNU/Linux and want to perform\n"
"a highly customized installation, this Install Class is for you."
msgstr ""

#: ../help.pm_.c:319
msgid ""
"DrakX will attempt at first to look for one or more PCI\n"
"SCSI adapter(s). If it finds it (or them)  and knows which driver(s)\n"
"to use, it will insert it (them)  automatically.\n"
"\n"
"If your SCSI adapter is ISA, or is PCI but DrakX doesn't know\n"
"which driver to use for this card, or if you have no SCSI adapters\n"
"at all, you will then be prompted on whether you have one or not.\n"
"If you have none, answer \"No\". If you have one or more, answer\n"
"\"Yes\". A list of drivers will then pop up, from which you will\n"
"have to select one.\n"
"\n"
"After you have selected the driver, DrakX will ask if you\n"
"want to specify options for it. First, try and let the driver\n"
"probe for the hardware: it usually works fine.\n"
"\n"
"If not, do not forget the information on your hardware that you\n"
"could get from you documentation or from Windows (if you have\n"
"it on your system), as suggested by the installation guide.\n"
"These are the options you will need to provide to the driver."
msgstr ""

#: ../help.pm_.c:340
msgid ""
"In this stage, you may choose what partition(s) use to install your\n"
"Linux-Mandrake system."
msgstr ""

#: ../help.pm_.c:370
msgid ""
"You may now select the packages you wish to install.\n"
"\n"
"\n"
"Please note that some packages require the installation of others.\n"
"These are referred to as package dependencies. The packages you select,\n"
"and the packages they require will be automatically selected for\n"
"install. It is impossible to install a package without installing all\n"
"of its dependencies.\n"
"\n"
"\n"
"Information on each category and specific package is available in the\n"
"area titled \"Info\",  located between list of packages and the five\n"
"buttons \"Install\", \"Select more/less\" and \"Show more/less\"."
msgstr ""

#: ../help.pm_.c:385
msgid ""
"The packages selected are now being installed.\n"
"\n"
"\n"
"This operation should take a few minutes."
msgstr ""

#: ../help.pm_.c:405
msgid ""
"This section is dedicated to configuring a local area network,\n"
"or LAN. If you answer \"Yes\" here, DrakX will try to find an\n"
"Ethernet adapter on your machine. PCI adapters should be found and\n"
"initialized automatically. However, if your peripheral is ISA,\n"
"autodetection will not work, and you will have to choose a driver\n"
"from the list that will appear then.\n"
"\n"
"\n"
"As for SCSI adapters, you can let the driver probe for the adapter\n"
"in the first time, otherwise you will have to specify the options\n"
"to the driver that you will have fetched from Windows' control\n"
"panel.\n"
"\n"
"\n"
"If you install a Linux-Mandrake system on a machine which is part\n"
"of an already existing network, the network administrator will\n"
"have given you all necessary information (IP address, network\n"
"submask or netmask for short, and hostname). If you're setting\n"
"up a private network at home for example, you should choose\n"
"addresses "
msgstr ""

#: ../help.pm_.c:433
msgid ""
"Linux can deal with many types of printer. Each of these\n"
"types require a different setup.\n"
"\n"
"\n"
"If your printer is directly connected to your computer, select\n"
"\"Local printer\". You will then have to tell which port your\n"
"printer is connected to, and select the appropriate filter.\n"
"\n"
"\n"
"If you want to access a printer located on a remote Unix machine,\n"
"you will have to select \"Remote lpd queue\". In order to make\n"
"it work, no username or password is required, but you will need\n"
"to know the name of the printing queue on this server.\n"
"\n"
"\n"
"If you want to access a SMB printer (which means, a printer located\n"
"on a remote Windows 9x/NT machine), you will have to specify its\n"
"SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
"plus the username, workgroup and password required in order to\n"
"access the printer, and of course the name of the printer.The same goes\n"
"for a NetWare printer, except that you need no workgroup information."
msgstr ""

#: ../help.pm_.c:456
msgid ""
"You must now enter the root password for your Linux-Mandrake\n"
"system. The password must be entered twice to verify that both\n"
"password entries are identical.\n"
"\n"
"\n"
"Root is the administrator of the system, and is the only user\n"
"allowed to modify the system configuration. Therefore, choose\n"
"this password carefully! Unauthorized use of the root account can\n"
"be extremely dangerous to the integrity of the system and its data,\n"
"and other systems connected to it. The password should be a\n"
"mixture of alphanumeric characters and a least 8 characters long. It\n"
"should *never* be written down. Do not make the password too long or\n"
"complicated, though: you must be able to remember without too much\n"
"effort."
msgstr ""

#: ../install2.pm_.c:41
msgid "Choose your language"
msgstr ""

#: ../install2.pm_.c:42
msgid "Select installation class"
msgstr ""

#: ../install2.pm_.c:43
msgid "Setup SCSI"
msgstr ""

#: ../install2.pm_.c:44
msgid "Choose install or upgrade"
msgstr ""

#: ../install2.pm_.c:45
msgid "Configure mouse"
msgstr ""

#: ../install2.pm_.c:46
msgid "Choose your keyboard"
msgstr ""

#: ../install2.pm_.c:47
msgid "Setup filesystems"
msgstr ""

#: ../install2.pm_.c:48
msgid "Format partitions"
msgstr ""

#: ../install2.pm_.c:49
msgid "Choose packages to install"
msgstr ""

#: ../install2.pm_.c:50
msgid "Install system"
msgstr ""

#: ../install2.pm_.c:51
msgid "Miscellaneous"
msgstr ""

#: ../install2.pm_.c:52
msgid "Configure networking"
msgstr ""

#: ../install2.pm_.c:53
msgid "Configure timezone"
msgstr ""

#: ../install2.pm_.c:55
msgid "Configure printer"
msgstr ""

#: ../install2.pm_.c:56 ../install_steps_interactive.pm_.c:614
#: ../install_steps_interactive.pm_.c:615
msgid "Set root password"
msgstr ""

#: ../install2.pm_.c:57
msgid "Add a user"
msgstr ""

#: ../install2.pm_.c:58
msgid "Create a bootdisk"
msgstr ""

#: ../install2.pm_.c:59
msgid "Install bootloader"
msgstr ""

#: ../install2.pm_.c:60
msgid "Configure X"
msgstr ""

#: ../install2.pm_.c:61
msgid "Exit install"
msgstr ""

#: ../install2.pm_.c:85
msgid "beginner"
msgstr ""

#: ../install2.pm_.c:85
msgid "developer"
msgstr ""

#: ../install2.pm_.c:85
msgid "expert"
msgstr ""

#: ../install2.pm_.c:85
msgid "server"
msgstr ""

#: ../install2.pm_.c:310
msgid "Partitioning failed: no root filesystem"
msgstr ""

#: ../install2.pm_.c:324
msgid "Not enough swap to fulfill installation, please add some"
msgstr ""

#: ../install_any.pm_.c:174
msgid ""
"I can't read your partition table, it's too corrupted for me :(\n"
"I'll try to go on blanking bad partitions"
msgstr ""

#: ../install_any.pm_.c:190
msgid ""
"DiskDrake failed to read correctly the partition table.\n"
"Continue at your own risk!"
msgstr ""

#: ../install_any.pm_.c:200
msgid "Searching root partition."
msgstr ""

#: ../install_any.pm_.c:231
msgid "Information"
msgstr ""

#: ../install_any.pm_.c:232
#, c-format
msgid "%s: This is not a root partition, please select another one."
msgstr ""

#: ../install_any.pm_.c:234
msgid "No root partition found"
msgstr ""

#: ../install_any.pm_.c:270
msgid "Can't use broadcast with no NIS domain"
msgstr ""

#: ../install_any.pm_.c:422
msgid "Error reading file $f"
msgstr ""

#: ../install_any.pm_.c:428
#, c-format
msgid "Bad kickstart file %s (failed %s)"
msgstr ""

#: ../install_steps.pm_.c:74
msgid ""
"An error occurred, but I don't know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""

#: ../install_steps.pm_.c:138
#, c-format
msgid "Duplicate mount point %s"
msgstr ""

#: ../install_steps.pm_.c:430
msgid "No floppy drive available"
msgstr ""

#: ../install_steps_auto_install.pm_.c:18 ../install_steps_stdio.pm_.c:26
#, c-format
msgid "Entering step `%s'\n"
msgstr ""

#: ../install_steps_graphical.pm_.c:259 ../install_steps_gtk.pm_.c:259
msgid "You must have a swap partition"
msgstr ""

#: ../install_steps_graphical.pm_.c:261 ../install_steps_gtk.pm_.c:261
msgid ""
"You don't have a swap partition\n"
"\n"
"Continue anyway?"
msgstr ""

#: ../install_steps_graphical.pm_.c:287 ../install_steps_gtk.pm_.c:287
msgid "Choose the size you want to install"
msgstr ""

#: ../install_steps_graphical.pm_.c:334 ../install_steps_gtk.pm_.c:334
msgid "Total size: "
msgstr ""

#: ../install_steps_graphical.pm_.c:346 ../install_steps_gtk.pm_.c:346
#, c-format
msgid "Version: %s\n"
msgstr ""

#: ../install_steps_graphical.pm_.c:347 ../install_steps_gtk.pm_.c:347
#, c-format
msgid "Size: %d KB\n"
msgstr ""

#: ../install_steps_graphical.pm_.c:462 ../install_steps_gtk.pm_.c:462
msgid "Choose the packages you want to install"
msgstr ""

#: ../install_steps_graphical.pm_.c:465 ../install_steps_gtk.pm_.c:465
msgid "Info"
msgstr ""

#: ../install_steps_graphical.pm_.c:473 ../install_steps_gtk.pm_.c:473
#: ../install_steps_interactive.pm_.c:87
msgid "Install"
msgstr ""

#: ../install_steps_graphical.pm_.c:492 ../install_steps_gtk.pm_.c:492
#: ../install_steps_interactive.pm_.c:251
msgid "Installing"
msgstr ""

#: ../install_steps_graphical.pm_.c:499 ../install_steps_gtk.pm_.c:499
msgid "Please wait, "
msgstr ""

#: ../install_steps_graphical.pm_.c:501 ../install_steps_gtk.pm_.c:501
msgid "Time remaining "
msgstr ""

#: ../install_steps_graphical.pm_.c:502 ../install_steps_gtk.pm_.c:502
msgid "Total time "
msgstr ""

#: ../install_steps_graphical.pm_.c:507 ../install_steps_gtk.pm_.c:507
#: ../install_steps_interactive.pm_.c:251
msgid "Preparing installation"
msgstr ""

#: ../install_steps_graphical.pm_.c:528 ../install_steps_gtk.pm_.c:522
#, c-format
msgid "Installing package %s"
msgstr ""

#: ../install_steps_graphical.pm_.c:553 ../install_steps_gtk.pm_.c:547
msgid "Go on anyway?"
msgstr ""

#: ../install_steps_graphical.pm_.c:553 ../install_steps_gtk.pm_.c:547
msgid "There was an error ordering packages:"
msgstr ""

#: ../install_steps_graphical.pm_.c:577 ../install_steps_interactive.pm_.c:916
msgid "Use existing configuration for X11?"
msgstr ""

#: ../install_steps_interactive.pm_.c:43
msgid "An error occurred"
msgstr ""

#: ../install_steps_interactive.pm_.c:60
msgid "Which language do you want?"
msgstr ""

#: ../install_steps_interactive.pm_.c:75
msgid "What is your keyboard layout?"
msgstr ""

#: ../install_steps_interactive.pm_.c:85
msgid "Install/Upgrade"
msgstr ""

#: ../install_steps_interactive.pm_.c:86
msgid "Is this an install or an upgrade?"
msgstr ""

#: ../install_steps_interactive.pm_.c:87
msgid "Upgrade"
msgstr ""

#: ../install_steps_interactive.pm_.c:95
msgid "Root Partition"
msgstr ""

#: ../install_steps_interactive.pm_.c:96
msgid "What is the root partition (/) of your system?"
msgstr ""

#: ../install_steps_interactive.pm_.c:106
msgid "Recommended"
msgstr ""

#: ../install_steps_interactive.pm_.c:107
msgid "Customized"
msgstr ""

#: ../install_steps_interactive.pm_.c:108
msgid "Expert"
msgstr ""

#: ../install_steps_interactive.pm_.c:110
#: ../install_steps_interactive.pm_.c:124
msgid "Install Class"
msgstr ""

#: ../install_steps_interactive.pm_.c:111
msgid "What installation class do you want?"
msgstr ""

#: ../install_steps_interactive.pm_.c:120
msgid "Normal"
msgstr ""

#: ../install_steps_interactive.pm_.c:121
msgid "Developement"
msgstr ""

#: ../install_steps_interactive.pm_.c:122
msgid "Server"
msgstr ""

#: ../install_steps_interactive.pm_.c:125
msgid "What usage do you want?"
msgstr ""

#: ../install_steps_interactive.pm_.c:138
msgid "What is the type of your mouse?"
msgstr ""

#: ../install_steps_interactive.pm_.c:142
msgid "Emulate third button?"
msgstr ""

#: ../install_steps_interactive.pm_.c:145
msgid "Mouse Port"
msgstr ""

#: ../install_steps_interactive.pm_.c:146
msgid "Which serial port is your mouse connected to?"
msgstr ""

#: ../install_steps_interactive.pm_.c:159
msgid "no available partitions"
msgstr ""

#: ../install_steps_interactive.pm_.c:161
#, c-format
msgid "(%dMb)"
msgstr ""

#: ../install_steps_interactive.pm_.c:168
msgid "Which partition do you want to use as your root partition"
msgstr ""

#: ../install_steps_interactive.pm_.c:175
msgid "Choose the mount points"
msgstr ""

#: ../install_steps_interactive.pm_.c:187
msgid "You need to reboot for the partition table modifications to take place"
msgstr ""

#: ../install_steps_interactive.pm_.c:206
msgid "Choose the partitions you want to format"
msgstr ""

#: ../install_steps_interactive.pm_.c:225
msgid "Looking for available packages"
msgstr ""

#: ../install_steps_interactive.pm_.c:231
msgid "Finding packages to upgrade"
msgstr ""

#: ../install_steps_interactive.pm_.c:240
msgid "Package Group Selection"
msgstr ""

#: ../install_steps_interactive.pm_.c:260
msgid ""
"Installing package %s\n"
"%d%%"
msgstr ""

#: ../install_steps_interactive.pm_.c:274
msgid "Keep the current IP configuration"
msgstr ""

#: ../install_steps_interactive.pm_.c:275
msgid "Reconfigure network now"
msgstr ""

#: ../install_steps_interactive.pm_.c:276
#: ../install_steps_interactive.pm_.c:288
msgid "Do not set up networking"
msgstr ""

#: ../install_steps_interactive.pm_.c:278
#: ../install_steps_interactive.pm_.c:286
msgid "Network Configuration"
msgstr ""

#: ../install_steps_interactive.pm_.c:279
msgid "Local networking has already been configured. Do you want to:"
msgstr ""

#: ../install_steps_interactive.pm_.c:287
msgid "Do you want to configure networking for yout system?"
msgstr ""

#: ../install_steps_interactive.pm_.c:288
msgid "Dialup with modem"
msgstr ""

#: ../install_steps_interactive.pm_.c:288
msgid "Local LAN"
msgstr ""

#: ../install_steps_interactive.pm_.c:297
msgid "no network card found"
msgstr ""

#: ../install_steps_interactive.pm_.c:326
#, c-format
msgid "Configuring network device %s"
msgstr ""

#: ../install_steps_interactive.pm_.c:327
msgid ""
"Please enter the IP configuration for this machine.\n"
"Each item should be entered as an IP address in dotted-decimal\n"
"notation (for example, 1.2.3.4)."
msgstr ""

#: ../install_steps_interactive.pm_.c:330
msgid "Automatic IP"
msgstr ""

#: ../install_steps_interactive.pm_.c:330
msgid "IP address:"
msgstr ""

#: ../install_steps_interactive.pm_.c:330
msgid "Netmask:"
msgstr ""

#: ../install_steps_interactive.pm_.c:331
msgid "(bootp/dhcp)"
msgstr ""

#: ../install_steps_interactive.pm_.c:337
#: ../install_steps_interactive.pm_.c:504
msgid "IP address should be in format 1.2.3.4"
msgstr ""

#: ../install_steps_interactive.pm_.c:356
msgid "Configuring network"
msgstr ""

#: ../install_steps_interactive.pm_.c:357
msgid ""
"Please enter your host name.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''.\n"
"You may also enter the IP address of the gateway if you have one"
msgstr ""

#: ../install_steps_interactive.pm_.c:361
msgid "DNS server:"
msgstr ""

#: ../install_steps_interactive.pm_.c:361
msgid "Gateway device:"
msgstr ""

#: ../install_steps_interactive.pm_.c:361
msgid "Gateway:"
msgstr ""

#: ../install_steps_interactive.pm_.c:361
msgid "Host name:"
msgstr ""

#: ../install_steps_interactive.pm_.c:374
msgid "Try to find a modem?"
msgstr ""

#: ../install_steps_interactive.pm_.c:383
msgid "Which serial port is your modem connected to?"
msgstr ""

#: ../install_steps_interactive.pm_.c:387
msgid "Dialup options"
msgstr ""

#: ../install_steps_interactive.pm_.c:388
msgid "Connection name"
msgstr ""

#: ../install_steps_interactive.pm_.c:389
msgid "Phone number"
msgstr ""

#: ../install_steps_interactive.pm_.c:390
msgid "Login ID"
msgstr ""

#: ../install_steps_interactive.pm_.c:391
#: ../install_steps_interactive.pm_.c:616
#: ../install_steps_interactive.pm_.c:662
#: ../install_steps_interactive.pm_.c:753
msgid "Password"
msgstr ""

#: ../install_steps_interactive.pm_.c:392
msgid "Authentication"
msgstr ""

#: ../install_steps_interactive.pm_.c:392
msgid "CHAP"
msgstr ""

#: ../install_steps_interactive.pm_.c:392
msgid "PAP"
msgstr ""

#: ../install_steps_interactive.pm_.c:392
msgid "Script-based"
msgstr ""

#: ../install_steps_interactive.pm_.c:392
msgid "Terminal-based"
msgstr ""

#: ../install_steps_interactive.pm_.c:393
msgid "Domain name"
msgstr ""

#: ../install_steps_interactive.pm_.c:394
msgid "First DNS Server"
msgstr ""

#: ../install_steps_interactive.pm_.c:395
msgid "Second DNS Server"
msgstr ""

#: ../install_steps_interactive.pm_.c:406
msgid "Which is your timezone?"
msgstr ""

#: ../install_steps_interactive.pm_.c:407
msgid "Is your hardware clock set to GMT?"
msgstr ""

#: ../install_steps_interactive.pm_.c:417
msgid "Printer"
msgstr ""

#: ../install_steps_interactive.pm_.c:418
msgid "Would you like to configure a printer?"
msgstr ""

#: ../install_steps_interactive.pm_.c:430
msgid "Local Printer Options"
msgstr ""

#: ../install_steps_interactive.pm_.c:431
msgid ""
"Every print queue (which print jobs are directed to) needs a\n"
"name (often lp) and a spool directory associated with it. What\n"
"name and directory should be used for this queue?"
msgstr ""

#: ../install_steps_interactive.pm_.c:434
msgid "Name of queue:"
msgstr ""

#: ../install_steps_interactive.pm_.c:434
msgid "Spool directory:"
msgstr ""

#: ../install_steps_interactive.pm_.c:445
msgid "Select Printer Connection"
msgstr ""

#: ../install_steps_interactive.pm_.c:446
msgid "How is the printer connected?"
msgstr ""

#: ../install_steps_interactive.pm_.c:454
msgid "Detecting devices..."
msgstr ""

#: ../install_steps_interactive.pm_.c:454
msgid "Test ports"
msgstr ""

#: ../install_steps_interactive.pm_.c:467
#, c-format
msgid "A printer, model \"%s\", has been detected on "
msgstr ""

#: ../install_steps_interactive.pm_.c:474
msgid "Local Printer Device"
msgstr ""

#: ../install_steps_interactive.pm_.c:475
msgid ""
"What device is your printer connected to  \n"
"(note that /dev/lp0 is equivalent to LPT1:)?\n"
msgstr ""

#: ../install_steps_interactive.pm_.c:476
msgid "Printer Device:"
msgstr ""

#: ../install_steps_interactive.pm_.c:480
msgid "Remote lpd Printer Options"
msgstr ""

#: ../install_steps_interactive.pm_.c:481
msgid ""
"To use a remote lpd print queue, you need to supply\n"
"the hostname of the printer server and the queue name\n"
"on that server which jobs should be placed in."
msgstr ""

#: ../install_steps_interactive.pm_.c:484
msgid "Remote hostname:"
msgstr ""

#: ../install_steps_interactive.pm_.c:484
msgid "Remote queue"
msgstr ""

#: ../install_steps_interactive.pm_.c:489
msgid "SMB (Windows 9x/NT) Printer Options"
msgstr ""

#: ../install_steps_interactive.pm_.c:490
msgid ""
"To print to a SMB printer, you need to provide the\n"
"SMB host name (Note! It may be different from its\n"
"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
"well as the share name for the printer you wish to access and any\n"
"applicable user name, password, and workgroup information."
msgstr ""

#: ../install_steps_interactive.pm_.c:495
msgid "SMB server IP:"
msgstr ""

#: ../install_steps_interactive.pm_.c:495
msgid "SMB server host:"
msgstr ""

#: ../install_steps_interactive.pm_.c:496
#: ../install_steps_interactive.pm_.c:518
msgid "Password:"
msgstr ""

#: ../install_steps_interactive.pm_.c:496
msgid "Share name:"
msgstr ""

#: ../install_steps_interactive.pm_.c:496
#: ../install_steps_interactive.pm_.c:518
msgid "User name:"
msgstr ""

#: ../install_steps_interactive.pm_.c:497
msgid "Workgroup:"
msgstr ""

#: ../install_steps_interactive.pm_.c:512
msgid "NetWare Printer Options"
msgstr ""

#: ../install_steps_interactive.pm_.c:513
msgid ""
"To print to a NetWare printer, you need to provide the\n"
"NetWare print server name (Note! it may be different from its\n"
"TCP/IP hostname!) as well as the print queue name for the printer you\n"
"wish to access and any applicable user name and password."
msgstr ""

#: ../install_steps_interactive.pm_.c:517
msgid "Print Queue Name:"
msgstr ""

#: ../install_steps_interactive.pm_.c:517
msgid "Printer Server:"
msgstr ""

#: ../install_steps_interactive.pm_.c:528
msgid "Yes, print ASCII test page"
msgstr ""

#: ../install_steps_interactive.pm_.c:529
msgid "Yes, print PostScript test page"
msgstr ""

#: ../install_steps_interactive.pm_.c:530
msgid "Yes, print both test pages"
msgstr ""

#: ../install_steps_interactive.pm_.c:531
#: ../install_steps_interactive.pm_.c:1041 ../interactive.pm_.c:52
#: ../my_gtk.pm_.c:437
msgid "No"
msgstr ""

#: ../install_steps_interactive.pm_.c:537
msgid "Configure Printer"
msgstr ""

#: ../install_steps_interactive.pm_.c:538
msgid "What type of printer do you have?"
msgstr ""

#: ../install_steps_interactive.pm_.c:560
msgid "Printer options"
msgstr ""

#: ../install_steps_interactive.pm_.c:561
msgid "Paper Size"
msgstr ""

#: ../install_steps_interactive.pm_.c:562
msgid "Eject page after job?"
msgstr ""

#: ../install_steps_interactive.pm_.c:565
msgid "Fix stair-stepping text?"
msgstr ""

#: ../install_steps_interactive.pm_.c:568
msgid "Uniprint driver options"
msgstr ""

#: ../install_steps_interactive.pm_.c:569
msgid "Color depth options"
msgstr ""

#: ../install_steps_interactive.pm_.c:578
msgid "Do you want to test printing?"
msgstr ""

#: ../install_steps_interactive.pm_.c:614
msgid "No password"
msgstr ""

#: ../install_steps_interactive.pm_.c:614
#: ../install_steps_interactive.pm_.c:824 ../interactive.pm_.c:47
#: ../interactive.pm_.c:57 ../interactive.pm_.c:136
#: ../interactive_newt.pm_.c:46 ../interactive_newt.pm_.c:91
#: ../interactive_stdio.pm_.c:27 ../my_gtk.pm_.c:200 ../my_gtk.pm_.c:438
#: ../my_gtk.pm_.c:535
msgid "Ok"
msgstr ""

#: ../install_steps_interactive.pm_.c:617
#: ../install_steps_interactive.pm_.c:663
msgid "Password (again)"
msgstr ""

#: ../install_steps_interactive.pm_.c:619
msgid "Use shadow file"
msgstr ""

#: ../install_steps_interactive.pm_.c:619
msgid "shadow"
msgstr ""

#: ../install_steps_interactive.pm_.c:620
msgid "MD5"
msgstr ""

#: ../install_steps_interactive.pm_.c:620
msgid "Use MD5 passwords"
msgstr ""

#: ../install_steps_interactive.pm_.c:622
msgid "Use NIS"
msgstr ""

#: ../install_steps_interactive.pm_.c:622
msgid "yellow pages"
msgstr ""

#: ../install_steps_interactive.pm_.c:626
#: ../install_steps_interactive.pm_.c:674
msgid "Please try again"
msgstr ""

#: ../install_steps_interactive.pm_.c:626
#: ../install_steps_interactive.pm_.c:674
msgid "The passwords do not match"
msgstr ""

#: ../install_steps_interactive.pm_.c:628
#: ../install_steps_interactive.pm_.c:675
msgid "This password is too simple"
msgstr ""

#: ../install_steps_interactive.pm_.c:635
msgid "Authentification NIS"
msgstr ""

#: ../install_steps_interactive.pm_.c:636
msgid "NIS Domain"
msgstr ""

#: ../install_steps_interactive.pm_.c:636
msgid "NIS Server"
msgstr ""

#: ../install_steps_interactive.pm_.c:656
msgid "Accept user"
msgstr ""

#: ../install_steps_interactive.pm_.c:656
msgid "Add user"
msgstr ""

#: ../install_steps_interactive.pm_.c:657
#, c-format
msgid "(already added %s)"
msgstr ""

#: ../install_steps_interactive.pm_.c:657
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""

#: ../install_steps_interactive.pm_.c:659
msgid "Real name"
msgstr ""

#: ../install_steps_interactive.pm_.c:660
msgid "User name"
msgstr ""

#: ../install_steps_interactive.pm_.c:665
msgid "Shell"
msgstr ""

#: ../install_steps_interactive.pm_.c:676
msgid "Please give a user name"
msgstr ""

#: ../install_steps_interactive.pm_.c:677
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr ""

#: ../install_steps_interactive.pm_.c:678
msgid "This user name is already added"
msgstr ""

#: ../install_steps_interactive.pm_.c:699
msgid ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"LILO on your system, or another operating system removes LILO, or LILO "
"doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures. Would you like to create a bootdisk for your system?"
msgstr ""

#: ../install_steps_interactive.pm_.c:708
msgid "Sorry, no floppy drive available"
msgstr ""

#: ../install_steps_interactive.pm_.c:711
msgid "Choose the floppy drive you want to use to make the bootdisk"
msgstr ""

#: ../install_steps_interactive.pm_.c:712
msgid "Skip"
msgstr ""

#: ../install_steps_interactive.pm_.c:716
#, c-format
msgid "Insert a floppy in drive %s"
msgstr ""

#: ../install_steps_interactive.pm_.c:717
msgid "Creating bootdisk"
msgstr ""

#: ../install_steps_interactive.pm_.c:724
msgid "Preparing bootloader"
msgstr ""

#: ../install_steps_interactive.pm_.c:736
msgid "First sector of boot partition"
msgstr ""

#: ../install_steps_interactive.pm_.c:736
msgid "First sector of drive (MBR)"
msgstr ""

#: ../install_steps_interactive.pm_.c:740
msgid "LILO Installation"
msgstr ""

#: ../install_steps_interactive.pm_.c:741
msgid "Where do you want to install the bootloader?"
msgstr ""

#: ../install_steps_interactive.pm_.c:744
msgid "Do you want to use LILO?"
msgstr ""

#: ../install_steps_interactive.pm_.c:747
msgid "Boot device"
msgstr ""

#: ../install_steps_interactive.pm_.c:748
msgid "Linear (needed for some SCSI drives)"
msgstr ""

#: ../install_steps_interactive.pm_.c:748
msgid "linear"
msgstr ""

#: ../install_steps_interactive.pm_.c:749
msgid "Compact"
msgstr ""

#: ../install_steps_interactive.pm_.c:749
msgid "compact"
msgstr ""

#: ../install_steps_interactive.pm_.c:750
msgid "Delay before booting default image"
msgstr ""

#: ../install_steps_interactive.pm_.c:751
msgid "Video mode"
msgstr ""

#: ../install_steps_interactive.pm_.c:754
msgid "Restrict command line options"
msgstr ""

#: ../install_steps_interactive.pm_.c:754
msgid "restrict"
msgstr ""

#: ../install_steps_interactive.pm_.c:760
msgid "LILO main options"
msgstr ""

#: ../install_steps_interactive.pm_.c:763
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr ""

#: ../install_steps_interactive.pm_.c:772
msgid ""
"Here are the following entries in LILO.\n"
"You can add some more or change the existent ones."
msgstr ""

#: ../install_steps_interactive.pm_.c:774
msgid "Add"
msgstr ""

#: ../install_steps_interactive.pm_.c:783
msgid "Linux"
msgstr ""

#: ../install_steps_interactive.pm_.c:783
msgid "Other OS (windows...)"
msgstr ""

#: ../install_steps_interactive.pm_.c:783
msgid "Which type of entry do you want to add"
msgstr ""

#: ../install_steps_interactive.pm_.c:803
msgid "Image"
msgstr ""

#: ../install_steps_interactive.pm_.c:804
#: ../install_steps_interactive.pm_.c:812
msgid "Root"
msgstr ""

#: ../install_steps_interactive.pm_.c:805
msgid "Append"
msgstr ""

#: ../install_steps_interactive.pm_.c:806
msgid "Initrd"
msgstr ""

#: ../install_steps_interactive.pm_.c:807
msgid "Read-write"
msgstr ""

#: ../install_steps_interactive.pm_.c:813
msgid "Table"
msgstr ""

#: ../install_steps_interactive.pm_.c:814
msgid "Unsafe"
msgstr ""

#: ../install_steps_interactive.pm_.c:819
msgid "Label"
msgstr ""

#: ../install_steps_interactive.pm_.c:821
msgid "Default"
msgstr ""

#: ../install_steps_interactive.pm_.c:824
msgid "Remove entry"
msgstr ""

#: ../install_steps_interactive.pm_.c:827
msgid "Empty label not allowed"
msgstr ""

#: ../install_steps_interactive.pm_.c:828
msgid "This label is already in use"
msgstr ""

#: ../install_steps_interactive.pm_.c:829
#, c-format
msgid "A entry %s already exists"
msgstr ""

#: ../install_steps_interactive.pm_.c:843
msgid "Installation of LILO failed. The following error occured:"
msgstr ""

#: ../install_steps_interactive.pm_.c:855
msgid "Proxies configuration"
msgstr ""

#: ../install_steps_interactive.pm_.c:856
msgid "HTTP proxy"
msgstr ""

#: ../install_steps_interactive.pm_.c:857
msgid "FTP proxy"
msgstr ""

#: ../install_steps_interactive.pm_.c:863
msgid "Proxy should be http://..."
msgstr ""

#: ../install_steps_interactive.pm_.c:864
msgid "Proxy should be ftp://..."
msgstr ""

#: ../install_steps_interactive.pm_.c:874
msgid "Windows(TM)"
msgstr ""

#: ../install_steps_interactive.pm_.c:875
msgid "Poor"
msgstr ""

#: ../install_steps_interactive.pm_.c:876
msgid "Low"
msgstr ""

#: ../install_steps_interactive.pm_.c:877
msgid "Medium"
msgstr ""

#: ../install_steps_interactive.pm_.c:878
msgid "High"
msgstr ""

#: ../install_steps_interactive.pm_.c:879
msgid "Paranoid"
msgstr ""

#: ../install_steps_interactive.pm_.c:889
msgid "Miscellaneous questions"
msgstr ""

#: ../install_steps_interactive.pm_.c:890
msgid "Is this machine a laptop?"
msgstr ""

#: ../install_steps_interactive.pm_.c:891
msgid "Use hard drive optimisations?"
msgstr ""

#: ../install_steps_interactive.pm_.c:892
msgid "Choose security level"
msgstr ""

#: ../install_steps_interactive.pm_.c:893
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr ""

#: ../install_steps_interactive.pm_.c:896
msgid "(may cause data corruption)"
msgstr ""

#: ../install_steps_interactive.pm_.c:901
msgid "Give the ram size in Mb"
msgstr ""

#: ../install_steps_interactive.pm_.c:940
msgid ""
"Some steps are not completed.\n"
"\n"
"Do you really want to quit now?"
msgstr ""

#: ../install_steps_interactive.pm_.c:945
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"\n"
"For information on fixes which are available for this release of "
"Linux-Mandrake,\n"
"consult the Errata available from http://www.linux-mandrake.com/.\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Linux-Mandrake User's Guide."
msgstr ""

#: ../install_steps_interactive.pm_.c:966
#, c-format
msgid "Installing driver for %s card %s"
msgstr ""

#: ../install_steps_interactive.pm_.c:967
#, c-format
msgid "(module %s)"
msgstr ""

#: ../install_steps_interactive.pm_.c:977
#, c-format
msgid "Which %s driver should I try?"
msgstr ""

#: ../install_steps_interactive.pm_.c:984
#, c-format
msgid ""
"In some cases, the %s driver needs to have extra information to work\n"
"properly, although it normally works fine without. Would you like to "
"specify\n"
"extra options for it or allow the driver to probe your machine for the\n"
"information it needs? Occasionally, probing will hang a computer, but it "
"should\n"
"not cause any damage."
msgstr ""

#: ../install_steps_interactive.pm_.c:989
msgid "Autoprobe"
msgstr ""

#: ../install_steps_interactive.pm_.c:989
msgid "Specify options"
msgstr ""

#: ../install_steps_interactive.pm_.c:993
#, c-format
msgid "You may now provide its options to module %s."
msgstr ""

#: ../install_steps_interactive.pm_.c:999
#, c-format
msgid ""
"You may now provide its options to module %s.\n"
"Options are in format ``name=value name2=value2 ...''.\n"
"For instance, ``io=0x300 irq=7''"
msgstr ""

#: ../install_steps_interactive.pm_.c:1002
msgid "Module options:"
msgstr ""

#: ../install_steps_interactive.pm_.c:1012
#, c-format
msgid ""
"Loading module %s failed.\n"
"Do you want to try again with other parameters?"
msgstr ""

#: ../install_steps_interactive.pm_.c:1025
#, c-format
msgid "Skip %s PCMCIA probing"
msgstr ""

#: ../install_steps_interactive.pm_.c:1026
msgid "Configuring PCMCIA cards..."
msgstr ""

#: ../install_steps_interactive.pm_.c:1026
msgid "PCMCIA"
msgstr ""

#: ../install_steps_interactive.pm_.c:1033
msgid "Try to find PCI devices?"
msgstr ""

#: ../install_steps_interactive.pm_.c:1037
#, c-format
msgid "Found %s %s interfaces"
msgstr ""

#: ../install_steps_interactive.pm_.c:1038
msgid "Do you have another one?"
msgstr ""

#: ../install_steps_interactive.pm_.c:1039
#, c-format
msgid "Do you have any %s interface?"
msgstr ""

#: ../install_steps_interactive.pm_.c:1041 ../interactive.pm_.c:52
#: ../my_gtk.pm_.c:437
msgid "Yes"
msgstr ""

#: ../install_steps_interactive.pm_.c:1042
msgid "See hardware info"
msgstr ""

#: ../install_steps_newt.pm_.c:19
#, c-format
msgid "Linux-Mandrake Installation %s"
msgstr ""

#: ../install_steps_newt.pm_.c:30
msgid ""
"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
msgstr ""

#: ../interactive.pm_.c:57 ../interactive.pm_.c:135
#: ../interactive_newt.pm_.c:46 ../interactive_newt.pm_.c:91
#: ../interactive_stdio.pm_.c:27 ../my_gtk.pm_.c:201 ../my_gtk.pm_.c:438
msgid "Cancel"
msgstr ""

#: ../interactive.pm_.c:153
msgid "Please wait"
msgstr ""

#: ../interactive_stdio.pm_.c:35
#, c-format
msgid "Ambiguity (%s), be more precise\n"
msgstr ""

#: ../interactive_stdio.pm_.c:36 ../interactive_stdio.pm_.c:51
#: ../interactive_stdio.pm_.c:70
msgid "Bad choice, try again\n"
msgstr ""

#: ../interactive_stdio.pm_.c:39
#, c-format
msgid " ? (default %s) "
msgstr ""

#: ../interactive_stdio.pm_.c:52
#, c-format
msgid "Your choice? (default %s) "
msgstr ""

#: ../interactive_stdio.pm_.c:71
#, c-format
msgid "Your choice? (default %s  enter `none' for none) "
msgstr ""

#: ../keyboard.pm_.c:32
msgid "Belgian"
msgstr ""

#: ../keyboard.pm_.c:33
msgid "Bulgarian"
msgstr ""

#: ../keyboard.pm_.c:35
msgid "Czech"
msgstr ""

#: ../keyboard.pm_.c:36
msgid "German"
msgstr ""

#: ../keyboard.pm_.c:37
msgid "Danish"
msgstr ""

#: ../keyboard.pm_.c:38
msgid "Dvorak"
msgstr ""

#: ../keyboard.pm_.c:41
msgid "Spanish"
msgstr ""

#: ../keyboard.pm_.c:42
msgid "Finnish"
msgstr ""

#: ../keyboard.pm_.c:43
msgid "French"
msgstr ""

#: ../keyboard.pm_.c:48
msgid "Greek"
msgstr ""

#: ../keyboard.pm_.c:50
msgid "Hungarian"
msgstr ""

#: ../keyboard.pm_.c:52
msgid "Israeli"
msgstr ""

#: ../keyboard.pm_.c:53
msgid "Icelandic"
msgstr ""

#: ../keyboard.pm_.c:55
msgid "Italian"
msgstr ""

#: ../keyboard.pm_.c:56
msgid "Latin American"
msgstr ""

#: ../keyboard.pm_.c:58
msgid "Dutch"
msgstr ""

#: ../keyboard.pm_.c:62
msgid "Norwegian"
msgstr ""

#: ../keyboard.pm_.c:64
msgid "Polish"
msgstr ""

#: ../keyboard.pm_.c:65
msgid "Portuguese"
msgstr ""

#: ../keyboard.pm_.c:68
msgid "Russian"
msgstr ""

#: ../keyboard.pm_.c:69
msgid "Swedish"
msgstr ""

#: ../keyboard.pm_.c:71
msgid "Swiss (French layout)"
msgstr ""

#: ../keyboard.pm_.c:72
msgid "Swiss (German layout)"
msgstr ""

#: ../keyboard.pm_.c:77
msgid "Turkish (traditional \"F\" model)"
msgstr ""

#: ../keyboard.pm_.c:78
msgid "Turkish (modern \"Q\" model)"
msgstr ""

#: ../keyboard.pm_.c:80
msgid "UK keyboard"
msgstr ""

#: ../keyboard.pm_.c:82
msgid "US keyboard"
msgstr ""

#: ../lilo.pm_.c:139
#, c-format
msgid ""
"Welcome to LILO the operating system chooser!\n"
"\n"
"To list the possible choices, press <TAB>.\n"
"\n"
"To load one of them, write its name and press <ENTER> or wait %d seconds for "
"default boot.\n"
"\n"
msgstr ""

#: ../mouse.pm_.c:20
msgid "No Mouse"
msgstr ""

#: ../mouse.pm_.c:21
msgid "Microsoft Rev 2.1A or higher (serial)"
msgstr ""

#: ../mouse.pm_.c:22
msgid "Logitech CC Series (serial)"
msgstr ""

#: ../mouse.pm_.c:23
msgid "Logitech MouseMan+/FirstMouse+ (serial)"
msgstr ""

#: ../mouse.pm_.c:24
msgid "ASCII MieMouse (serial)"
msgstr ""

#: ../mouse.pm_.c:25
msgid "Genius NetMouse (serial)"
msgstr ""

#: ../mouse.pm_.c:26
msgid "Microsoft IntelliMouse (serial)"
msgstr ""

#: ../mouse.pm_.c:27
msgid "MM Series (serial)"
msgstr ""

#: ../mouse.pm_.c:28
msgid "MM HitTablet (serial)"
msgstr ""

#: ../mouse.pm_.c:29
msgid "Logitech Mouse (serial, old C7 type)"
msgstr ""

#: ../mouse.pm_.c:30
msgid "Logitech MouseMan/FirstMouse (serial)"
msgstr ""

#: ../mouse.pm_.c:31
msgid "Generic Mouse (serial)"
msgstr ""

#: ../mouse.pm_.c:32
msgid "Microsoft compatible (serial)"
msgstr ""

#: ../mouse.pm_.c:33
msgid "Generic 3 Button Mouse (serial)"
msgstr ""

#: ../mouse.pm_.c:34
msgid "Mouse Systems (serial)"
msgstr ""

#: ../mouse.pm_.c:35
msgid "Generic Mouse (PS/2)"
msgstr ""

#: ../mouse.pm_.c:36
msgid "Logitech MouseMan/FirstMouse (ps/2)"
msgstr ""

#: ../mouse.pm_.c:37
msgid "Generic 3 Button Mouse (PS/2)"
msgstr ""

#: ../mouse.pm_.c:38
msgid "ALPS GlidePoint (PS/2)"
msgstr ""

#: ../mouse.pm_.c:39
msgid "Logitech MouseMan+/FirstMouse+ (PS/2)"
msgstr ""

#: ../mouse.pm_.c:40
msgid "Kensington Thinking Mouse (PS/2)"
msgstr ""

#: ../mouse.pm_.c:41
msgid "ASCII MieMouse (PS/2)"
msgstr ""

#: ../mouse.pm_.c:42
msgid "Genius NetMouse (PS/2)"
msgstr ""

#: ../mouse.pm_.c:43
msgid "Genius NetMouse Pro (PS/2)"
msgstr ""

#: ../mouse.pm_.c:44
msgid "Genius NetScroll (PS/2)"
msgstr ""

#: ../mouse.pm_.c:45
msgid "Microsoft IntelliMouse (PS/2)"
msgstr ""

#: ../mouse.pm_.c:46
msgid "ATI Bus Mouse"
msgstr ""

#: ../mouse.pm_.c:47
msgid "Microsoft Bus Mouse"
msgstr ""

#: ../mouse.pm_.c:48
msgid "Logitech Bus Mouse"
msgstr ""

#: ../mouse.pm_.c:49
msgid "USB Mouse"
msgstr ""

#: ../mouse.pm_.c:50
msgid "USB Mouse (3 buttons or more)"
msgstr ""

#: ../partition_table.pm_.c:463
msgid ""
"You have a hole in your partition table but I can't use it.\n"
"The only solution is to move your primary partitions to have the hole next "
"to the extended partitions"
msgstr ""

#: ../partition_table.pm_.c:549
#, c-format
msgid "Error reading file %s"
msgstr ""

#: ../partition_table.pm_.c:556
#, c-format
msgid "Restoring from file %s failed: %s"
msgstr ""

#: ../partition_table.pm_.c:558
msgid "Bad backup file"
msgstr ""

#: ../partition_table.pm_.c:578
#, c-format
msgid "Error writing to file %s"
msgstr ""

#: ../printer.pm_.c:244
msgid "Local printer"
msgstr ""

#: ../printer.pm_.c:245
msgid "Remote lpd"
msgstr ""

#: ../printer.pm_.c:246
msgid "SMB/Windows 95/98/NT"
msgstr ""

#: ../printer.pm_.c:247
msgid "NetWare"
msgstr ""

#: ../raid.pm_.c:36
#, c-format
msgid "Can't add a partition to _formatted_ RAID md%d"
msgstr ""

#: ../raid.pm_.c:108
msgid "Can't write file $file"
msgstr ""

#: ../raid.pm_.c:145
#, c-format
msgid "Not enough partitions for RAID level %d\n"
msgstr ""