# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR Free Software Foundation, Inc. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "POT-Creation-Date: 2001-09-07 07:15+0200\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=CHARSET\n" "Content-Transfer-Encoding: 8-bit\n" #: ../../Xconfigurator.pm_.c:231 msgid "Configure all heads independently" msgstr "" #: ../../Xconfigurator.pm_.c:232 msgid "Use Xinerama extension" msgstr "" #: ../../Xconfigurator.pm_.c:235 #, c-format msgid "Configure only card \"%s\" (%s)" msgstr "" #: ../../Xconfigurator.pm_.c:238 msgid "Multi-head configuration" msgstr "" #: ../../Xconfigurator.pm_.c:239 msgid "" "Your system support multiple head configuration.\n" "What do you want to do?" msgstr "" #: ../../Xconfigurator.pm_.c:248 msgid "Graphic card" msgstr "" #: ../../Xconfigurator.pm_.c:248 msgid "Select a graphic card" msgstr "" #: ../../Xconfigurator.pm_.c:249 msgid "Choose a X server" msgstr "" #: ../../Xconfigurator.pm_.c:249 msgid "X server" msgstr "" #: ../../Xconfigurator.pm_.c:304 ../../Xconfigurator.pm_.c:311 #: ../../Xconfigurator.pm_.c:361 #, c-format msgid "XFree %s" msgstr "" #: ../../Xconfigurator.pm_.c:307 msgid "Which configuration of XFree do you want to have?" msgstr "" #: ../../Xconfigurator.pm_.c:319 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" #: ../../Xconfigurator.pm_.c:321 ../../Xconfigurator.pm_.c:354 #, c-format msgid "Your card can have 3D hardware acceleration support with XFree %s." msgstr "" #: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356 #, c-format msgid "XFree %s with 3D hardware acceleration" msgstr "" #: ../../Xconfigurator.pm_.c:331 ../../Xconfigurator.pm_.c:345 #, c-format msgid "" "Your card can have 3D hardware acceleration support with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" #: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347 #, c-format msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration" msgstr "" #: ../../Xconfigurator.pm_.c:342 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" #: ../../Xconfigurator.pm_.c:362 msgid "Xpmac (installation display driver)" msgstr "" #: ../../Xconfigurator.pm_.c:366 msgid "XFree configuration" msgstr "" #: ../../Xconfigurator.pm_.c:430 msgid "Select the memory size of your graphic card" msgstr "" #: ../../Xconfigurator.pm_.c:477 msgid "Choose options for server" msgstr "" #: ../../Xconfigurator.pm_.c:501 msgid "Choose a monitor" msgstr "" #: ../../Xconfigurator.pm_.c:501 msgid "Monitor" msgstr "" #: ../../Xconfigurator.pm_.c:504 msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" #: ../../Xconfigurator.pm_.c:511 msgid "Horizontal refresh rate" msgstr "" #: ../../Xconfigurator.pm_.c:512 msgid "Vertical refresh rate" msgstr "" #: ../../Xconfigurator.pm_.c:549 msgid "Monitor not configured" msgstr "" #: ../../Xconfigurator.pm_.c:552 msgid "Graphic card not configured yet" msgstr "" #: ../../Xconfigurator.pm_.c:555 msgid "Resolutions not chosen yet" msgstr "" #: ../../Xconfigurator.pm_.c:570 msgid "Do you want to test the configuration?" msgstr "" #: ../../Xconfigurator.pm_.c:574 msgid "Warning: testing this graphic card may freeze your computer" msgstr "" #: ../../Xconfigurator.pm_.c:577 msgid "Test of the configuration" msgstr "" #: ../../Xconfigurator.pm_.c:616 msgid "" "\n" "try to change some parameters" msgstr "" #: ../../Xconfigurator.pm_.c:616 msgid "An error has occurred:" msgstr "" #: ../../Xconfigurator.pm_.c:638 #, c-format msgid "Leaving in %d seconds" msgstr "" #: ../../Xconfigurator.pm_.c:649 msgid "Is this the correct setting?" msgstr "" #: ../../Xconfigurator.pm_.c:657 msgid "An error has occurred, try to change some parameters" msgstr "" #: ../../Xconfigurator.pm_.c:703 msgid "Resolution" msgstr "" #: ../../Xconfigurator.pm_.c:750 msgid "Choose the resolution and the color depth" msgstr "" #: ../../Xconfigurator.pm_.c:752 #, c-format msgid "Graphic card: %s" msgstr "" #: ../../Xconfigurator.pm_.c:753 #, c-format msgid "XFree86 server: %s" msgstr "" #: ../../Xconfigurator.pm_.c:769 ../../standalone/draknet_.c:293 #: ../../standalone/draknet_.c:296 msgid "Expert Mode" msgstr "" #: ../../Xconfigurator.pm_.c:770 msgid "Show all" msgstr "" #: ../../Xconfigurator.pm_.c:813 msgid "Resolutions" msgstr "" #: ../../Xconfigurator.pm_.c:1358 #, c-format msgid "Keyboard layout: %s\n" msgstr "" #: ../../Xconfigurator.pm_.c:1359 #, c-format msgid "Mouse type: %s\n" msgstr "" #: ../../Xconfigurator.pm_.c:1360 #, c-format msgid "Mouse device: %s\n" msgstr "" #: ../../Xconfigurator.pm_.c:1361 #, c-format msgid "Monitor: %s\n" msgstr "" #: ../../Xconfigurator.pm_.c:1362 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "" #: ../../Xconfigurator.pm_.c:1363 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "" #: ../../Xconfigurator.pm_.c:1364 #, c-format msgid "Graphic card: %s\n" msgstr "" #: ../../Xconfigurator.pm_.c:1365 #, c-format msgid "Graphic memory: %s kB\n" msgstr "" #: ../../Xconfigurator.pm_.c:1367 #, c-format msgid "Color depth: %s\n" msgstr "" #: ../../Xconfigurator.pm_.c:1368 #, c-format msgid "Resolution: %s\n" msgstr "" #: ../../Xconfigurator.pm_.c:1370 #, c-format msgid "XFree86 server: %s\n" msgstr "" #: ../../Xconfigurator.pm_.c:1371 #, c-format msgid "XFree86 driver: %s\n" msgstr "" #: ../../Xconfigurator.pm_.c:1389 msgid "Preparing X-Window configuration" msgstr "" #: ../../Xconfigurator.pm_.c:1409 msgid "What do you want to do?" msgstr "" #: ../../Xconfigurator.pm_.c:1414 msgid "Change Monitor" msgstr "" #: ../../Xconfigurator.pm_.c:1415 msgid "Change Graphic card" msgstr "" #: ../../Xconfigurator.pm_.c:1417 msgid "Change Server options" msgstr "" #: ../../Xconfigurator.pm_.c:1418 msgid "Change Resolution" msgstr "" #: ../../Xconfigurator.pm_.c:1419 msgid "Show information" msgstr "" #: ../../Xconfigurator.pm_.c:1420 msgid "Test again" msgstr "" #: ../../Xconfigurator.pm_.c:1421 ../../bootlook.pm_.c:156 msgid "Quit" msgstr "" #: ../../Xconfigurator.pm_.c:1429 #, c-format msgid "" "Keep the changes?\n" "Current configuration is:\n" "\n" "%s" msgstr "" #: ../../Xconfigurator.pm_.c:1452 #, c-format msgid "Please relog into %s to activate the changes" msgstr "" #: ../../Xconfigurator.pm_.c:1472 msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "" #: ../../Xconfigurator.pm_.c:1475 msgid "X at startup" msgstr "" #: ../../Xconfigurator.pm_.c:1476 msgid "" "I can set up your computer to automatically start X upon booting.\n" "Would you like X to start when you reboot?" msgstr "" #: ../../Xconfigurator_consts.pm_.c:6 msgid "256 colors (8 bits)" msgstr "" #: ../../Xconfigurator_consts.pm_.c:7 msgid "32 thousand colors (15 bits)" msgstr "" #: ../../Xconfigurator_consts.pm_.c:8 msgid "65 thousand colors (16 bits)" msgstr "" #: ../../Xconfigurator_consts.pm_.c:9 msgid "16 million colors (24 bits)" msgstr "" #: ../../Xconfigurator_consts.pm_.c:10 msgid "4 billion colors (32 bits)" msgstr "" #: ../../Xconfigurator_consts.pm_.c:106 msgid "256 kB" msgstr "" #: ../../Xconfigurator_consts.pm_.c:107 msgid "512 kB" msgstr "" #: ../../Xconfigurator_consts.pm_.c:108 msgid "1 MB" msgstr "" #: ../../Xconfigurator_consts.pm_.c:109 msgid "2 MB" msgstr "" #: ../../Xconfigurator_consts.pm_.c:110 msgid "4 MB" msgstr "" #: ../../Xconfigurator_consts.pm_.c:111 msgid "8 MB" msgstr "" #: ../../Xconfigurator_consts.pm_.c:112 msgid "16 MB" msgstr "" #: ../../Xconfigurator_consts.pm_.c:113 msgid "32 MB" msgstr "" #: ../../Xconfigurator_consts.pm_.c:114 msgid "64 MB or more" msgstr "" #: ../../Xconfigurator_consts.pm_.c:122 msgid "Standard VGA, 640x480 at 60 Hz" msgstr "" #: ../../Xconfigurator_consts.pm_.c:123 msgid "Super VGA, 800x600 at 56 Hz" msgstr "" #: ../../Xconfigurator_consts.pm_.c:124 msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)" msgstr "" #: ../../Xconfigurator_consts.pm_.c:125 msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz" msgstr "" #: ../../Xconfigurator_consts.pm_.c:126 msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz" msgstr "" #: ../../Xconfigurator_consts.pm_.c:127 msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz" msgstr "" #: ../../Xconfigurator_consts.pm_.c:128 msgid "High Frequency SVGA, 1024x768 at 70 Hz" msgstr "" #: ../../Xconfigurator_consts.pm_.c:129 msgid "Multi-frequency that can do 1280x1024 at 60 Hz" msgstr "" #: ../../Xconfigurator_consts.pm_.c:130 msgid "Multi-frequency that can do 1280x1024 at 74 Hz" msgstr "" #: ../../Xconfigurator_consts.pm_.c:131 msgid "Multi-frequency that can do 1280x1024 at 76 Hz" msgstr "" #: ../../Xconfigurator_consts.pm_.c:132 msgid "Monitor that can do 1600x1200 at 70 Hz" msgstr "" #: ../../Xconfigurator_consts.pm_.c:133 msgid "Monitor that can do 1600x1200 at 76 Hz" msgstr "" #: ../../any.pm_.c:101 ../../any.pm_.c:126 msgid "First sector of boot partition" msgstr "" #: ../../any.pm_.c:101 ../../any.pm_.c:126 ../../any.pm_.c:199 msgid "First sector of drive (MBR)" msgstr "" #: ../../any.pm_.c:105 msgid "SILO Installation" msgstr "" #: ../../any.pm_.c:106 ../../any.pm_.c:119 msgid "Where do you want to install the bootloader?" msgstr "" #: ../../any.pm_.c:118 msgid "LILO/grub Installation" msgstr "" #: ../../any.pm_.c:130 ../../any.pm_.c:144 msgid "SILO" msgstr "" #: ../../any.pm_.c:132 msgid "LILO with text menu" msgstr "" #: ../../any.pm_.c:133 ../../any.pm_.c:144 msgid "LILO with graphical menu" msgstr "" #: ../../any.pm_.c:136 msgid "Grub" msgstr "" #: ../../any.pm_.c:140 msgid "Boot from DOS/Windows (loadlin)" msgstr "" #: ../../any.pm_.c:142 ../../any.pm_.c:144 msgid "Yaboot" msgstr "" #: ../../any.pm_.c:150 ../../any.pm_.c:182 msgid "Bootloader main options" msgstr "" #: ../../any.pm_.c:151 ../../any.pm_.c:183 msgid "Bootloader to use" msgstr "" #: ../../any.pm_.c:153 msgid "Bootloader installation" msgstr "" #: ../../any.pm_.c:155 ../../any.pm_.c:185 msgid "Boot device" msgstr "" #: ../../any.pm_.c:156 msgid "LBA (doesn't work on old BIOSes)" msgstr "" #: ../../any.pm_.c:157 msgid "Compact" msgstr "" #: ../../any.pm_.c:157 msgid "compact" msgstr "" #: ../../any.pm_.c:158 ../../any.pm_.c:255 msgid "Video mode" msgstr "" #: ../../any.pm_.c:160 msgid "Delay before booting default image" msgstr "" #: ../../any.pm_.c:162 ../../any.pm_.c:735 #: ../../install_steps_interactive.pm_.c:934 ../../network/modem.pm_.c:46 #: ../../printerdrake.pm_.c:358 ../../printerdrake.pm_.c:432 #: ../../standalone/draknet_.c:595 msgid "Password" msgstr "" #: ../../any.pm_.c:163 ../../any.pm_.c:736 #: ../../install_steps_interactive.pm_.c:935 msgid "Password (again)" msgstr "" #: ../../any.pm_.c:164 msgid "Restrict command line options" msgstr "" #: ../../any.pm_.c:164 msgid "restrict" msgstr "" #: ../../any.pm_.c:166 msgid "Clean /tmp at each boot" msgstr "" #: ../../any.pm_.c:167 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "" #: ../../any.pm_.c:169 msgid "Enable multi profiles" msgstr "" #: ../../any.pm_.c:173 msgid "Give the ram size in MB" msgstr "" #: ../../any.pm_.c:175 msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "" #: ../../any.pm_.c:176 ../../any.pm_.c:712 #: ../../install_steps_interactive.pm_.c:929 msgid "Please try again" msgstr "" #: ../../any.pm_.c:176 ../../any.pm_.c:712 #: ../../install_steps_interactive.pm_.c:929 msgid "The passwords do not match" msgstr "" #: ../../any.pm_.c:184 msgid "Init Message" msgstr "" #: ../../any.pm_.c:186 msgid "Open Firmware Delay" msgstr "" #: ../../any.pm_.c:187 msgid "Kernel Boot Timeout" msgstr "" #: ../../any.pm_.c:188 msgid "Enable CD Boot?" msgstr "" #: ../../any.pm_.c:189 msgid "Enable OF Boot?" msgstr "" #: ../../any.pm_.c:190 msgid "Default OS?" msgstr "" #: ../../any.pm_.c:212 msgid "" "Here are the different entries.\n" "You can add some more or change the existing ones." msgstr "" #: ../../any.pm_.c:222 msgid "Add" msgstr "" #: ../../any.pm_.c:222 ../../any.pm_.c:723 ../../diskdrake.pm_.c:179 #: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1258 #: ../../printerdrake.pm_.c:1259 ../../printerdrake.pm_.c:1302 #: ../../printerdrake.pm_.c:1344 msgid "Done" msgstr "" #: ../../any.pm_.c:222 msgid "Modify" msgstr "" #: ../../any.pm_.c:230 msgid "Which type of entry do you want to add?" msgstr "" #: ../../any.pm_.c:231 msgid "Linux" msgstr "" #: ../../any.pm_.c:231 msgid "Other OS (SunOS...)" msgstr "" #: ../../any.pm_.c:232 msgid "Other OS (MacOS...)" msgstr "" #: ../../any.pm_.c:232 msgid "Other OS (windows...)" msgstr "" #: ../../any.pm_.c:251 msgid "Image" msgstr "" #: ../../any.pm_.c:252 ../../any.pm_.c:263 msgid "Root" msgstr "" #: ../../any.pm_.c:253 ../../any.pm_.c:282 msgid "Append" msgstr "" #: ../../any.pm_.c:257 msgid "Initrd" msgstr "" #: ../../any.pm_.c:258 msgid "Read-write" msgstr "" #: ../../any.pm_.c:265 msgid "Table" msgstr "" #: ../../any.pm_.c:266 msgid "Unsafe" msgstr "" #: ../../any.pm_.c:273 ../../any.pm_.c:278 ../../any.pm_.c:281 msgid "Label" msgstr "" #: ../../any.pm_.c:275 ../../any.pm_.c:286 msgid "Default" msgstr "" #: ../../any.pm_.c:283 msgid "Initrd-size" msgstr "" #: ../../any.pm_.c:285 msgid "NoVideo" msgstr "" #: ../../any.pm_.c:293 msgid "Remove entry" msgstr "" #: ../../any.pm_.c:296 msgid "Empty label not allowed" msgstr "" #: ../../any.pm_.c:297 msgid "This label is already used" msgstr "" #: ../../any.pm_.c:602 #, c-format msgid "Found %s %s interfaces" msgstr "" #: ../../any.pm_.c:603 msgid "Do you have another one?" msgstr "" #: ../../any.pm_.c:604 #, c-format msgid "Do you have any %s interfaces?" msgstr "" #: ../../any.pm_.c:606 ../../any.pm_.c:765 ../../interactive.pm_.c:110 #: ../../my_gtk.pm_.c:674 msgid "No" msgstr "" #: ../../any.pm_.c:606 ../../any.pm_.c:764 ../../interactive.pm_.c:110 #: ../../my_gtk.pm_.c:674 msgid "Yes" msgstr "" #: ../../any.pm_.c:607 msgid "See hardware info" msgstr "" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: ../../any.pm_.c:642 #, c-format msgid "Installing driver for %s card %s" msgstr "" #: ../../any.pm_.c:643 #, c-format msgid "(module %s)" msgstr "" #. -PO: the %s is the driver type (scsi, network, sound,...) #: ../../any.pm_.c:654 #, c-format msgid "Which %s driver should I try?" msgstr "" #: ../../any.pm_.c:662 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" #: ../../any.pm_.c:667 msgid "Autoprobe" msgstr "" #: ../../any.pm_.c:667 msgid "Specify options" msgstr "" #: ../../any.pm_.c:671 #, c-format msgid "You may now provide its options to module %s." msgstr "" #: ../../any.pm_.c:677 #, c-format msgid "" "You may now provide its options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" #: ../../any.pm_.c:680 msgid "Module options:" msgstr "" #: ../../any.pm_.c:691 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" #: ../../any.pm_.c:709 #, c-format msgid "(already added %s)" msgstr "" #: ../../any.pm_.c:713 msgid "This password is too simple" msgstr "" #: ../../any.pm_.c:714 msgid "Please give a user name" msgstr "" #: ../../any.pm_.c:715 msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "" #: ../../any.pm_.c:716 msgid "This user name is already added" msgstr "" #: ../../any.pm_.c:720 msgid "Add user" msgstr "" #: ../../any.pm_.c:721 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" #: ../../any.pm_.c:722 msgid "Accept user" msgstr "" #: ../../any.pm_.c:733 msgid "Real name" msgstr "" #: ../../any.pm_.c:734 ../../printerdrake.pm_.c:357 #: ../../printerdrake.pm_.c:431 msgid "User name" msgstr "" #: ../../any.pm_.c:737 msgid "Shell" msgstr "" #: ../../any.pm_.c:739 msgid "Icon" msgstr "" #: ../../any.pm_.c:761 msgid "Autologin" msgstr "" #: ../../any.pm_.c:762 msgid "" "I can set up your computer to automatically log on one user.\n" "Do you want to use this feature?" msgstr "" #: ../../any.pm_.c:766 msgid "Choose the default user:" msgstr "" #: ../../any.pm_.c:767 msgid "Choose the window manager to run:" msgstr "" #: ../../any.pm_.c:776 msgid "Please, choose a language to use." msgstr "" #: ../../any.pm_.c:777 msgid "You can choose other languages that will be available after install" msgstr "" #: ../../any.pm_.c:789 ../../install_steps_interactive.pm_.c:633 msgid "All" msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: ../../bootloader.pm_.c:260 #, c-format msgid "" "Welcome to %s the operating system chooser!\n" "\n" "Choose an operating system in the list above or\n" "wait %d seconds for default boot.\n" "\n" msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:833 msgid "Welcome to GRUB the operating system chooser!" msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:836 #, c-format msgid "Use the %c and %c keys for selecting which entry is highlighted." msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:839 msgid "Press enter to boot the selected OS, 'e' to edit the" msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:842 msgid "commands before booting, or 'c' for a command-line." msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:845 #, c-format msgid "The highlighted entry will be booted automatically in %d seconds." msgstr "" #: ../../bootloader.pm_.c:849 msgid "not enough room in /boot" msgstr "" #. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows #. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language #: ../../bootloader.pm_.c:949 msgid "Desktop" msgstr "" #. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows #: ../../bootloader.pm_.c:951 msgid "Start Menu" msgstr "" #: ../../bootlook.pm_.c:46 msgid "no help implemented yet.\n" msgstr "" #: ../../bootlook.pm_.c:62 msgid "Boot Style Configuration" msgstr "" #: ../../bootlook.pm_.c:79 msgid "/_File" msgstr "" #: ../../bootlook.pm_.c:80 msgid "/File/_Quit" msgstr "" #: ../../bootlook.pm_.c:80 msgid "Q" msgstr "" #: ../../bootlook.pm_.c:91 msgid "NewStyle Categorizing Monitor" msgstr "" #: ../../bootlook.pm_.c:92 msgid "NewStyle Monitor" msgstr "" #: ../../bootlook.pm_.c:93 msgid "Traditional Monitor" msgstr "" #: ../../bootlook.pm_.c:94 msgid "Traditional Gtk+ Monitor" msgstr "" #: ../../bootlook.pm_.c:95 msgid "Launch Aurora at boot time" msgstr "" #: ../../bootlook.pm_.c:100 msgid "Lilo/grub mode" msgstr "" #: ../../bootlook.pm_.c:102 #, c-format msgid "" "You are currently using %s as Boot Manager.\n" "Click on Configure to launch the setup wizard." msgstr "" #: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:642 #: ../../standalone/draknet_.c:275 ../../standalone/tinyfirewall_.c:57 msgid "Configure" msgstr "" #: ../../bootlook.pm_.c:108 msgid "Boot mode" msgstr "" #: ../../bootlook.pm_.c:136 msgid "System mode" msgstr "" #: ../../bootlook.pm_.c:138 msgid "Launch the X-Window system at start" msgstr "" #: ../../bootlook.pm_.c:143 msgid "No, I don't want autologin" msgstr "" #: ../../bootlook.pm_.c:145 msgid "Yes, I want autologin with this (user, desktop)" msgstr "" #: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:107 #: ../../standalone/draknet_.c:139 ../../standalone/draknet_.c:203 #: ../../standalone/draknet_.c:315 ../../standalone/draknet_.c:425 #: ../../standalone/draknet_.c:499 ../../standalone/draknet_.c:535 #: ../../standalone/draknet_.c:636 msgid "OK" msgstr "" #: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:505 #: ../../interactive.pm_.c:120 ../../interactive.pm_.c:284 #: ../../interactive.pm_.c:304 ../../interactive_stdio.pm_.c:27 #: ../../my_gtk.pm_.c:415 ../../my_gtk.pm_.c:418 ../../my_gtk.pm_.c:675 #: ../../printerdrake.pm_.c:921 ../../standalone/drakgw_.c:647 #: ../../standalone/draknet_.c:114 ../../standalone/draknet_.c:146 #: ../../standalone/draknet_.c:308 ../../standalone/draknet_.c:511 #: ../../standalone/draknet_.c:650 ../../standalone/tinyfirewall_.c:63 msgid "Cancel" msgstr "" #: ../../bootlook.pm_.c:224 #, c-format msgid "can not open /etc/inittab for reading: %s" msgstr "" #: ../../bootlook.pm_.c:274 #, c-format msgid "can not open /etc/sysconfig/autologin for reading: %s" msgstr "" #: ../../bootlook.pm_.c:335 ../../standalone/drakboot_.c:47 msgid "Installation of LILO failed. The following error occured:" msgstr "" #: ../../common.pm_.c:93 msgid "GB" msgstr "" #: ../../common.pm_.c:93 msgid "KB" msgstr "" #: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287 #: ../../install_steps_graphical.pm_.c:334 msgid "MB" msgstr "" #: ../../common.pm_.c:101 msgid "TB" msgstr "" #: ../../common.pm_.c:109 #, c-format msgid "%d minutes" msgstr "" #: ../../common.pm_.c:111 msgid "1 minute" msgstr "" #: ../../common.pm_.c:113 #, c-format msgid "%d seconds" msgstr "" #: ../../diskdrake.pm_.c:102 msgid "Please make a backup of your data first" msgstr "" #: ../../diskdrake.pm_.c:102 ../../diskdrake_interactive.pm_.c:763 #: ../../diskdrake_interactive.pm_.c:772 ../../diskdrake_interactive.pm_.c:826 msgid "Read carefully!" msgstr "" #: ../../diskdrake.pm_.c:106 msgid "" "If you plan to use aboot, be carefull to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "" #: ../../diskdrake.pm_.c:124 ../../install_steps.pm_.c:72 #: ../../install_steps_interactive.pm_.c:37 #: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119 #: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62 msgid "Error" msgstr "" #: ../../diskdrake.pm_.c:200 msgid "New" msgstr "" #: ../../diskdrake.pm_.c:222 ../../diskdrake.pm_.c:225 msgid "Remote" msgstr "" #: ../../diskdrake.pm_.c:227 ../../diskdrake.pm_.c:461 #: ../../diskdrake_interactive.pm_.c:328 ../../diskdrake_interactive.pm_.c:482 msgid "Mount point" msgstr "" #: ../../diskdrake.pm_.c:228 msgid "Options" msgstr "" #: ../../diskdrake.pm_.c:230 ../../diskdrake.pm_.c:408 #: ../../diskdrake.pm_.c:516 ../../diskdrake_interactive.pm_.c:329 #: ../../diskdrake_interactive.pm_.c:450 msgid "Type" msgstr "" #: ../../diskdrake.pm_.c:242 ../../diskdrake_interactive.pm_.c:337 msgid "Unmount" msgstr "" #: ../../diskdrake.pm_.c:243 ../../diskdrake_interactive.pm_.c:333 msgid "Mount" msgstr "" #: ../../diskdrake.pm_.c:247 msgid "Choose action" msgstr "" #: ../../diskdrake.pm_.c:253 msgid "" "You have one big FAT partition\n" "(generally used by MicroSoft Dos/Windows).\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" #: ../../diskdrake.pm_.c:256 msgid "Please click on a partition" msgstr "" #: ../../diskdrake.pm_.c:273 ../../install_steps_gtk.pm_.c:506 msgid "Details" msgstr "" #: ../../diskdrake.pm_.c:386 msgid "Ext2" msgstr "" #: ../../diskdrake.pm_.c:386 msgid "FAT" msgstr "" #: ../../diskdrake.pm_.c:386 msgid "HFS" msgstr "" #: ../../diskdrake.pm_.c:386 msgid "Journalised" msgstr "" #: ../../diskdrake.pm_.c:386 msgid "SunOS" msgstr "" #: ../../diskdrake.pm_.c:386 msgid "Swap" msgstr "" #: ../../diskdrake.pm_.c:387 ../../diskdrake_interactive.pm_.c:882 msgid "Empty" msgstr "" #: ../../diskdrake.pm_.c:387 ../../install_steps_gtk.pm_.c:362 #: ../../install_steps_gtk.pm_.c:422 ../../mouse.pm_.c:162 msgid "Other" msgstr "" #: ../../diskdrake.pm_.c:391 msgid "Filesystem types:" msgstr "" #: ../../diskdrake.pm_.c:408 ../../diskdrake_interactive.pm_.c:351 msgid "Create" msgstr "" #: ../../diskdrake.pm_.c:408 ../../diskdrake.pm_.c:410 #, c-format msgid "Use ``%s'' instead" msgstr "" #: ../../diskdrake.pm_.c:410 ../../diskdrake_interactive.pm_.c:338 msgid "Delete" msgstr "" #: ../../diskdrake.pm_.c:414 msgid "Use ``Unmount'' first" msgstr "" #: ../../diskdrake.pm_.c:415 ../../diskdrake_interactive.pm_.c:442 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "" #: ../../diskdrake.pm_.c:460 ../../diskdrake_interactive.pm_.c:481 #, c-format msgid "Where do you want to mount device %s?" msgstr "" #: ../../diskdrake.pm_.c:482 msgid "Mount options" msgstr "" #: ../../diskdrake.pm_.c:489 msgid "Various" msgstr "" #: ../../diskdrake.pm_.c:507 msgid "Removable media" msgstr "" #: ../../diskdrake.pm_.c:514 msgid "Change type" msgstr "" #: ../../diskdrake.pm_.c:515 ../../diskdrake_interactive.pm_.c:449 msgid "Which filesystem do you want?" msgstr "" #: ../../diskdrake.pm_.c:546 msgid "Scanning available nfs shared resource" msgstr "" #: ../../diskdrake.pm_.c:551 #, c-format msgid "Scanning available nfs shared resource of server %s" msgstr "" #: ../../diskdrake.pm_.c:560 ../../diskdrake.pm_.c:630 msgid "If the list above doesn't contain the wanted entry, enter it here:" msgstr "" #: ../../diskdrake.pm_.c:563 ../../diskdrake.pm_.c:633 msgid "Server" msgstr "" #: ../../diskdrake.pm_.c:564 ../../diskdrake.pm_.c:634 msgid "Shared resource" msgstr "" #: ../../diskdrake.pm_.c:597 msgid "Scanning available samba shared resource" msgstr "" #: ../../diskdrake.pm_.c:608 ../../diskdrake.pm_.c:621 #, c-format msgid "Scanning available samba shared resource of server %s" msgstr "" #: ../../diskdrake_interactive.pm_.c:163 msgid "Choose a partition" msgstr "" #: ../../diskdrake_interactive.pm_.c:163 msgid "Choose another partition" msgstr "" #: ../../diskdrake_interactive.pm_.c:188 msgid "Exit" msgstr "" #: ../../diskdrake_interactive.pm_.c:210 msgid "Toggle to expert mode" msgstr "" #: ../../diskdrake_interactive.pm_.c:210 msgid "Toggle to normal mode" msgstr "" #: ../../diskdrake_interactive.pm_.c:210 msgid "Undo" msgstr "" #: ../../diskdrake_interactive.pm_.c:210 msgid "Wizard" msgstr "" #: ../../diskdrake_interactive.pm_.c:229 msgid "Continue anyway?" msgstr "" #: ../../diskdrake_interactive.pm_.c:234 msgid "Quit without saving" msgstr "" #: ../../diskdrake_interactive.pm_.c:234 msgid "Quit without writing the partition table?" msgstr "" #: ../../diskdrake_interactive.pm_.c:237 msgid "Do you want to save /etc/fstab modifications" msgstr "" #: ../../diskdrake_interactive.pm_.c:247 msgid "Auto allocate" msgstr "" #: ../../diskdrake_interactive.pm_.c:247 msgid "Clear all" msgstr "" #: ../../diskdrake_interactive.pm_.c:250 msgid "Hard drive information" msgstr "" #: ../../diskdrake_interactive.pm_.c:267 msgid "Not enough space for auto-allocating" msgstr "" #: ../../diskdrake_interactive.pm_.c:273 msgid "All primary partitions are used" msgstr "" #: ../../diskdrake_interactive.pm_.c:274 msgid "I can't add any more partition" msgstr "" #: ../../diskdrake_interactive.pm_.c:275 msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" #: ../../diskdrake_interactive.pm_.c:283 ../../diskdrake_interactive.pm_.c:300 msgid "Select file" msgstr "" #: ../../diskdrake_interactive.pm_.c:291 msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" #: ../../diskdrake_interactive.pm_.c:301 msgid "Warning" msgstr "" #: ../../diskdrake_interactive.pm_.c:302 msgid "" "Insert a floppy in drive\n" "All data on this floppy will be lost" msgstr "" #: ../../diskdrake_interactive.pm_.c:310 msgid "Trying to rescue partition table" msgstr "" #: ../../diskdrake_interactive.pm_.c:316 msgid "Detailed information" msgstr "" #: ../../diskdrake_interactive.pm_.c:330 ../../diskdrake_interactive.pm_.c:548 msgid "Resize" msgstr "" #: ../../diskdrake_interactive.pm_.c:331 ../../diskdrake_interactive.pm_.c:588 msgid "Move" msgstr "" #: ../../diskdrake_interactive.pm_.c:332 msgid "Format" msgstr "" #: ../../diskdrake_interactive.pm_.c:334 msgid "Active" msgstr "" #: ../../diskdrake_interactive.pm_.c:335 msgid "Add to RAID" msgstr "" #: ../../diskdrake_interactive.pm_.c:336 msgid "Add to LVM" msgstr "" #: ../../diskdrake_interactive.pm_.c:339 msgid "Remove from RAID" msgstr "" #: ../../diskdrake_interactive.pm_.c:340 msgid "Remove from LVM" msgstr "" #: ../../diskdrake_interactive.pm_.c:341 msgid "Modify RAID" msgstr "" #: ../../diskdrake_interactive.pm_.c:342 msgid "Use for loopback" msgstr "" #: ../../diskdrake_interactive.pm_.c:385 msgid "Create a new partition" msgstr "" #: ../../diskdrake_interactive.pm_.c:388 msgid "Start sector: " msgstr "" #: ../../diskdrake_interactive.pm_.c:390 ../../diskdrake_interactive.pm_.c:696 msgid "Size in MB: " msgstr "" #: ../../diskdrake_interactive.pm_.c:391 ../../diskdrake_interactive.pm_.c:697 msgid "Filesystem type: " msgstr "" #: ../../diskdrake_interactive.pm_.c:392 ../../diskdrake_interactive.pm_.c:866 #: ../../diskdrake_interactive.pm_.c:938 msgid "Mount point: " msgstr "" #: ../../diskdrake_interactive.pm_.c:396 msgid "Preference: " msgstr "" #: ../../diskdrake_interactive.pm_.c:448 msgid "Change partition type" msgstr "" #: ../../diskdrake_interactive.pm_.c:453 msgid "Switching from ext2 to ext3" msgstr "" #: ../../diskdrake_interactive.pm_.c:480 #, c-format msgid "Where do you want to mount loopback file %s?" msgstr "" #: ../../diskdrake_interactive.pm_.c:487 msgid "" "Can't unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" #: ../../diskdrake_interactive.pm_.c:507 msgid "Computing FAT filesystem bounds" msgstr "" #: ../../diskdrake_interactive.pm_.c:507 ../../diskdrake_interactive.pm_.c:563 #: ../../install_interactive.pm_.c:112 msgid "Resizing" msgstr "" #: ../../diskdrake_interactive.pm_.c:536 msgid "This partition is not resizeable" msgstr "" #: ../../diskdrake_interactive.pm_.c:541 msgid "All data on this partition should be backed-up" msgstr "" #: ../../diskdrake_interactive.pm_.c:543 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "" #: ../../diskdrake_interactive.pm_.c:548 msgid "Choose the new size" msgstr "" #: ../../diskdrake_interactive.pm_.c:549 msgid "New size in MB: " msgstr "" #: ../../diskdrake_interactive.pm_.c:589 msgid "Which disk do you want to move it to?" msgstr "" #: ../../diskdrake_interactive.pm_.c:590 msgid "Sector" msgstr "" #: ../../diskdrake_interactive.pm_.c:591 msgid "Which sector do you want to move it to?" msgstr "" #: ../../diskdrake_interactive.pm_.c:594 msgid "Moving" msgstr "" #: ../../diskdrake_interactive.pm_.c:594 msgid "Moving partition..." msgstr "" #: ../../diskdrake_interactive.pm_.c:600 ../../diskdrake_interactive.pm_.c:841 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "" #: ../../diskdrake_interactive.pm_.c:602 ../../diskdrake_interactive.pm_.c:843 msgid "Formatting" msgstr "" #: ../../diskdrake_interactive.pm_.c:603 ../../diskdrake_interactive.pm_.c:844 #, c-format msgid "Formatting loopback file %s" msgstr "" #: ../../diskdrake_interactive.pm_.c:604 ../../diskdrake_interactive.pm_.c:845 #: ../../install_steps_interactive.pm_.c:419 #, c-format msgid "Formatting partition %s" msgstr "" #: ../../diskdrake_interactive.pm_.c:621 msgid "Choose an existing RAID to add to" msgstr "" #: ../../diskdrake_interactive.pm_.c:622 ../../diskdrake_interactive.pm_.c:640 msgid "new" msgstr "" #: ../../diskdrake_interactive.pm_.c:638 msgid "Choose an existing LVM to add to" msgstr "" #: ../../diskdrake_interactive.pm_.c:643 msgid "LVM name?" msgstr "" #: ../../diskdrake_interactive.pm_.c:681 msgid "This partition can't be used for loopback" msgstr "" #: ../../diskdrake_interactive.pm_.c:694 msgid "Loopback" msgstr "" #: ../../diskdrake_interactive.pm_.c:695 msgid "Loopback file name: " msgstr "" #: ../../diskdrake_interactive.pm_.c:702 msgid "File already used by another loopback, choose another one" msgstr "" #: ../../diskdrake_interactive.pm_.c:703 msgid "File already exists. Use it?" msgstr "" #: ../../diskdrake_interactive.pm_.c:746 msgid "device" msgstr "" #: ../../diskdrake_interactive.pm_.c:747 msgid "level" msgstr "" #: ../../diskdrake_interactive.pm_.c:748 msgid "chunk size" msgstr "" #: ../../diskdrake_interactive.pm_.c:763 msgid "Be careful: this operation is dangerous." msgstr "" #: ../../diskdrake_interactive.pm_.c:778 msgid "What type of partitioning?" msgstr "" #: ../../diskdrake_interactive.pm_.c:796 msgid "" "Sorry I won't accept to create /boot so far onto the drive (on a cylinder > " "1024).\n" "Either you use LILO and it won't work, or you don't use LILO and you don't " "need /boot" msgstr "" #: ../../diskdrake_interactive.pm_.c:800 msgid "" "The partition you've selected to add as root (/) is physically located " "beyond\n" "the 1024th cylinder of the hard drive, and you have no /boot partition.\n" "If you plan to use the LILO boot manager, be careful to add a /boot partition" msgstr "" #: ../../diskdrake_interactive.pm_.c:806 msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "So be careful to add a /boot partition" msgstr "" #: ../../diskdrake_interactive.pm_.c:826 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "" #: ../../diskdrake_interactive.pm_.c:830 msgid "You'll need to reboot before the modification can take place" msgstr "" #: ../../diskdrake_interactive.pm_.c:867 ../../diskdrake_interactive.pm_.c:924 msgid "Device: " msgstr "" #: ../../diskdrake_interactive.pm_.c:868 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "" #: ../../diskdrake_interactive.pm_.c:872 ../../diskdrake_interactive.pm_.c:880 #: ../../diskdrake_interactive.pm_.c:942 msgid "Type: " msgstr "" #: ../../diskdrake_interactive.pm_.c:876 msgid "Name: " msgstr "" #: ../../diskdrake_interactive.pm_.c:884 #, c-format msgid "Start: sector %s\n" msgstr "" #: ../../diskdrake_interactive.pm_.c:885 #, c-format msgid "Size: %s" msgstr "" #: ../../diskdrake_interactive.pm_.c:887 #, c-format msgid ", %s sectors" msgstr "" #: ../../diskdrake_interactive.pm_.c:889 #, c-format msgid "Cylinder %d to cylinder %d\n" msgstr "" #: ../../diskdrake_interactive.pm_.c:890 msgid "Formatted\n" msgstr "" #: ../../diskdrake_interactive.pm_.c:891 msgid "Not formatted\n" msgstr "" #: ../../diskdrake_interactive.pm_.c:892 msgid "Mounted\n" msgstr "" #: ../../diskdrake_interactive.pm_.c:893 #, c-format msgid "RAID md%s\n" msgstr "" #: ../../diskdrake_interactive.pm_.c:895 #, c-format msgid "Loopback file(s): %s\n" msgstr "" #: ../../diskdrake_interactive.pm_.c:896 msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" #: ../../diskdrake_interactive.pm_.c:898 #, c-format msgid "Level %s\n" msgstr "" #: ../../diskdrake_interactive.pm_.c:899 #, c-format msgid "Chunk size %s\n" msgstr "" #: ../../diskdrake_interactive.pm_.c:900 #, c-format msgid "RAID-disks %s\n" msgstr "" #: ../../diskdrake_interactive.pm_.c:902 #, c-format msgid "Loopback file name: %s" msgstr "" #: ../../diskdrake_interactive.pm_.c:905 msgid "" "\n" "Chances are, this partition is\n" "a Driver partition, you should\n" "probably leave it alone.\n" msgstr "" #: ../../diskdrake_interactive.pm_.c:908 msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" msgstr "" #: ../../diskdrake_interactive.pm_.c:925 #, c-format msgid "Size: %s\n" msgstr "" #: ../../diskdrake_interactive.pm_.c:926 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "" #: ../../diskdrake_interactive.pm_.c:927 msgid "Info: " msgstr "" #: ../../diskdrake_interactive.pm_.c:928 #, c-format msgid "LVM-disks %s\n" msgstr "" #: ../../diskdrake_interactive.pm_.c:929 #, c-format msgid "Partition table type: %s\n" msgstr "" #: ../../diskdrake_interactive.pm_.c:930 #, c-format msgid "on bus %d id %d\n" msgstr "" #: ../../diskdrake_interactive.pm_.c:944 #, c-format msgid "Options: %s" msgstr "" #: ../../fs.pm_.c:438 ../../fs.pm_.c:447 ../../fs.pm_.c:451 ../../fs.pm_.c:455 #: ../../fs.pm_.c:459 ../../fs.pm_.c:463 #, c-format msgid "%s formatting of %s failed" msgstr "" #: ../../fs.pm_.c:496 #, c-format msgid "I don't know how to format %s in type %s" msgstr "" #: ../../fs.pm_.c:558 msgid "mount failed" msgstr "" #: ../../fs.pm_.c:577 #, c-format msgid "fsck failed with exit code %d or signal %d" msgstr "" #: ../../fs.pm_.c:586 ../../fs.pm_.c:592 ../../partition_table.pm_.c:549 msgid "mount failed: " msgstr "" #: ../../fs.pm_.c:607 ../../partition_table.pm_.c:545 #, c-format msgid "error unmounting %s: %s" msgstr "" #: ../../fsedit.pm_.c:21 msgid "simple" msgstr "" #: ../../fsedit.pm_.c:30 msgid "server" msgstr "" #: ../../fsedit.pm_.c:443 msgid "You can't use JFS for partitions smaller than 16MB" msgstr "" #: ../../fsedit.pm_.c:444 msgid "You can't use ReiserFS for partitions smaller than 32MB" msgstr "" #: ../../fsedit.pm_.c:453 msgid "Mount points must begin with a leading /" msgstr "" #: ../../fsedit.pm_.c:454 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "" #: ../../fsedit.pm_.c:458 #, c-format msgid "You can't use a LVM Logical Volume for mount point %s" msgstr "" #: ../../fsedit.pm_.c:460 msgid "This directory should remain within the root filesystem" msgstr "" #: ../../fsedit.pm_.c:462 msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n" msgstr "" #: ../../fsedit.pm_.c:578 #, c-format msgid "Error opening %s for writing: %s" msgstr "" #: ../../fsedit.pm_.c:663 msgid "" "An error has occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" #: ../../fsedit.pm_.c:686 msgid "You don't have any partitions!" msgstr "" #: ../../help.pm_.c:7 msgid "" "Before going further, you should read carefully the terms of the license. " "It\n" "covers the whole Mandrake Linux distribution, and if you do not agree with " "all\n" "the terms in it, click on the Refuse button. That'll immediately terminate " "the\n" "installation. To follow on with the installation, click the Accept button." msgstr "" #: ../../help.pm_.c:13 msgid "" "GNU/Linux is a multiuser system, and this means that each user can have his " "own\n" "preferences, his own files and so on. You can read the User Guide to learn " "more.\n" "But unlike Root, which is the administrator, the users which you will add " "here\n" "will not be entitled to change anything except their own files and their " "own\n" "configuration. You will have to create at least one regular user for " "yourself.\n" "That account is where you should log in for routine use. Although it is " "very\n" "practical to log in as Root everyday, it may also be very dangerous! The\n" "slightest mistake could mean that your system would not work any more. If " "you\n" "make a serious mistake as a regular user, you may only lose some " "information,\n" "but not the entire system.\n" "\n" "First you have to enter your real name. This is not mandatory, of course as " "you\n" "can actually enter whatever you want. drakX will then take the first word " "you\n" "have entered in the box and will bring it over to the User name. This is " "the\n" "name that this particular user will use to log into the system. You can " "change\n" "it. You then have to enter a password here. A non-privileged (regular) " "user's\n" "password is not as crucial as that of Root from a security point of view, " "but\n" "that is no reason to neglect it after all, they are your files at risk.\n" "\n" "If you click on Accept user, you can then add as many as you want. Add a " "user\n" "for each of your friends: your father or your sister, for example. When you " "have\n" "added all the users you want, select Done.\n" "\n" "Clicking the Advanced button allows you to change the default Shell for " "that\n" "user (bash by default)." msgstr "" #: ../../help.pm_.c:40 msgid "" "It is now time to specify which programs you wish to install on your " "system.\n" "There are thousands of packages available for Mandrake Linux, and you are " "not\n" "supposed to know them all by heart.\n" "\n" "If you are performing a standard installation from CDROM you will first be " "asked\n" "to specify the CDs you currently have. Check the boxes corresponding to the " "CDs\n" "you've got around and click OK.\n" "\n" "Packages are sorted in groups corresponding to a particular use of your " "machine.\n" "The groups themselves are sorted in four sections:\n" "\n" " * Workstation: If your machine will be used as a workstation, select one or " "more\n" "of the corresponding groups.\n" "\n" " * Graphical Environment: Select here your preferred graphical environment.\n" "Select one at least if you want to have a graphical workstation!\n" "\n" " * Development: if the machine will be used for programming choose the " "desired\n" "group(s).\n" "\n" " * Server: Finally, if the machine is intended to be a server, you are able " "here\n" "to select the most common services that you wish to see installed on the\n" "machine.\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory " "text\n" "about this group.\n" "\n" "Clicking the Advanced button, will allow you to select the Individual " "package\n" "selection option. This is useful if you know well the packages offered or if " "you\n" "want to have total control on what will be installed.\n" "\n" "If you have started the installation in ``Update'' mode, you can unselect " "all\n" "groups to avoid installing any new package and just repair or update the\n" "existing system.\n" "\n" "Finally, depending whether you choose to select individual packages or not, " "you\n" "will be presented a tree containing all packages classified by groups and\n" "subgroups. While browsing the tree, you can select entire groups, subgroups, " "or\n" "simply packages.\n" "\n" "Whenever you select a package on the tree, a description appears on the " "right.\n" "When you have finished with your selections, click the Install button. The\n" "installation itself then begins. If you have chosen to install a lot of\n" "packages, you can go and have a cup of coffee.\n" "\n" "!! If it happens that a server package has been selected either " "intentionnally\n" "or because it was part of a whole group; you will be asked to confirm that " "you\n" "really want those servers to be installed. Under Mandrake Linux, installed\n" "servers are started by default at boot time. Even if they are safe at the " "time\n" "the distribution was shipped, it may happen that security holes be " "discovered\n" "afterwards. In particular if you don't know what all that is about, simply " "click\n" "No here. Clickin Yes will install the listed services and they will be " "available\n" "by default. !!\n" "\n" "The Automatic dependencies option simply disable the warning dialog which\n" "appears whenever the installer automatically selects a package because it is " "a\n" "dependency of another package you just selected." msgstr "" #: ../../help.pm_.c:99 msgid "" "If you wish to connect your computer to the Internet or to a local network\n" "please choose the correct option. Please turn on your device before choosing " "the\n" "correct option to let DrakX detect it automaticall.\n" "\n" "Mandrake Linux offers you to configure your Internet connection at install " "time.\n" "Available connections are: traditional modem, ISDN modem, ADSL connection, " "cable\n" "modem, and finally a simple LAN connection (Ethernet).\n" "\n" "We won't enter here into the details of each configuration. Simply make " "sure\n" "that you have all the parameters from your Internet Service Provider or " "system\n" "administrator.\n" "\n" "You can consult the chapter of the manual about Internet connection for " "details\n" "about the configuration, or simply wait until your system is installed and " "use\n" "the program described there to configure your connection.\n" "\n" "If you do not have any connection to the Internet or a local network, " "choose\n" "\"Disable networking\".\n" "\n" "If you wish to configure the network later after installation or if you " "have\n" "finished to configure your network connection, choose \"Done\"." msgstr "" #: ../../help.pm_.c:122 msgid "" "You may now choose which services you want to start at boot time.\n" "\n" "Here are presented all the services available with the current " "installation.\n" "Review them carefully and uncheck those that are not always needed at boot " "time.\n" "\n" "You can get a short explanatory text on a service by placing the mouse " "cursor on\n" "the service name. If you are not sure whether a service is useful or not, it " "is\n" "safer to leave the default behavior though.\n" "\n" "Be very careful in this step if you intend to use your machine as a server: " "you\n" "will probably want not to start any services that you don't need. Please\n" "remember that several services can be dangerous if they are enable on a " "server.\n" "In general, select only the services that you really need." msgstr "" #: ../../help.pm_.c:137 msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface " "on\n" "which all the graphics environments (KDE, Gnome, AfterStep, WindowMaker...)\n" "bundled with Mandrake Linux rely. In this section, drakX will try to " "configure X\n" "automatically.\n" "\n" "It is extremely rare for it to fail. The only reason for it doing so is if " "the\n" "hardware is very old (or very new). If it succeeds, it will start X\n" "automatically with the best resolution possible depending on the size of " "the\n" "monitor. A window will then appear and ask you if you can see it.\n" "\n" "If you are doing an Expert install, you will enter the X configuration " "wizard.\n" "See the corresponding section of the manual for more information about this\n" "wizard.\n" "\n" "If you can see the message and answer Yes, then drakX will proceed to next " "step.\n" "If you cannot see the message, it simply means that the configuration was " "wrong\n" "and the test will automatically end after 10 seconds, restoring the screen.\n" "\n" "It can happen that the first try isn't the best display (screen is too " "small,\n" "shifted left or right...). This is why, even if X starts up correctly, " "drakX\n" "will then ask you if the configuration suits you and will propose to change " "it\n" "by displaying a list of valid modes it could find, asking you to select " "one.\n" "\n" "As a last resort, if you still cannot get X to work, choose Change graphics\n" "card, select Unlisted card, and when prompted on which server you want, " "choose\n" "FBDev. This is a failsafe option which works with any modern graphics card. " "Then\n" "choose Test again to be sure.\n" "\n" "Finally, you will be asked on whether you want to see the graphical " "interface at\n" "boot. Note that you will be asked this even if you chose not to test the\n" "configuration. Obviously, you want to answer No if your machine will act as " "a\n" "server or if you were not successful in getting the display configured." msgstr "" #: ../../help.pm_.c:171 msgid "" "The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n" "booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at " "the\n" "prompt. But in case your computer cannot boot from the CDROM, you should " "come\n" "back to this step for help in at least two situations:\n" "\n" " * when installing the boot loader, drakX will rewrite the boot sector (MBR) " "of\n" "your main disk (unless you are using another boot manager) so that you can " "start\n" "up with either Windows or GNU/Linux (assuming you have Windows in your " "system).\n" "If you need to reinstall Windows, the Microsoft install process will rewrite " "the\n" "boot sector, and then you will not be able to start GNU/Linux!\n" "\n" " * if a problem arises and you cannot start up GNU/Linux from the hard disk, " "this\n" "floppy disk will be the only means of starting up GNU/Linux. It contains a " "fair\n" "number of system tools for restoring a system which has crashed due to a " "power\n" "failure, an unfortunate typing error, a typo in a password, or any other " "reason.\n" "\n" "When you click on this step, you will be asked to enter a disk inside the " "drive.\n" "The floppy disk that you will insert must be empty or must only contain " "data\n" "which you do not need. You will not have to format it; drakX will rewrite " "the\n" "whole disk." msgstr "" #: ../../help.pm_.c:193 msgid "" "At this point, you need to choose where to install your Mandrake Linux " "operating\n" "system on your hard drive. If it is empty or if an existing operating " "system\n" "uses all the space available on it, you need to partition it. Basically,\n" "partitioning a hard drive consists of logically dividing it to create space " "to\n" "install your new Mandrake Linux system.\n" "\n" "Because the effects of the partitioning process are usually irreversible,\n" "partitioning can be intimidating and stressful if you are an inexperienced " "user.\n" "Hopefully, there is a wizard which simplifies this process. Before " "beginning,\n" "please consult the manual and take your time.\n" "\n" "If you are running the install in Expert mode, you will enter the Mandrake " "Linux\n" "partitioning tool: DiskDrake;. It allows you to fine-tune your partitions. " "See\n" "the chapter DiskDrake of the manual; the usage is the same. You can use from " "the\n" "installation interface the wizards as described here by clicking the button\n" "Wizard from the interface.\n" "\n" "If partitions have been already defined (from a previous installation or " "from\n" "another partitioning tool), you just need choose those to use to install " "your\n" "Linux system.\n" "\n" "If partitions haven't been already defined, you need to create them. To do " "that,\n" "use the wizard available above. Depending of your hard drive configuration,\n" "several options are available:\n" "\n" " * Use free space: it will simply lead to an automatic partitioning of your " "blank\n" "drive(s); you won't need to worry any more about it.\n" "\n" " * Use existing partition: the wizard has detected one or more existing " "Linux\n" "partitions on your hard drive. If you want to keep them, choose this " "option.\n" "\n" " * Erase entire disk: if you want delete all data and all partitions present " "on\n" "your hard drive and replace them by your new Mandrake Linux system, you can\n" "choose this option. Be careful with this solution, you will not be able to\n" "revert your choice after confirmation.\n" "\n" " * Use the free space on the Windows partition: if Microsoft Windows is " "installed\n" "on your hard drive and takes all space available on it, you have to create " "free\n" "space for Linux data. To do that you can delete your Microsoft Windows " "partition\n" "and data (see \"Erase entire disk\" or \"Expert mode\" solutions) or resize " "your\n" "Microsoft Windows partition. Resizing can be performed without loss of any " "data.\n" "This solution is recommended if you want use both Mandrake Linux and " "Microsoft\n" "Windows on same computer.\n" "\n" " Before choosing this solution, please understand that the size of your " "Microsoft\n" "Windows partition will be smaller than at present time. It means that you " "will\n" "have less free space under Microsoft Windows to store your data or install " "new\n" "software.\n" "\n" " * Remove Windows: it will simply erase everything on the drive and begin " "fresh,\n" "partitioning from scratch. All data on your disk will be lost.\n" "\n" " !! If you choose this option, All data on your disk will be lost. !!\n" "\n" " * Expert mode: if you want to partition manually your hard drive, you can " "choose\n" "this option. Be careful before choosing this solution. It is powerful but it " "is\n" "very dangerous. You can lose all your data very easily. So, don't choose " "this\n" "solution unless you know what you are doing." msgstr "" #: ../../help.pm_.c:253 msgid "" "There you are. Installation is now complete and your GNU/Linux system is " "ready\n" "to use. Just click OK to reboot the system. You can start GNU/Linux or " "Windows,\n" "whichever you prefer (if you are dual-booting), as soon as the computer has\n" "booted up again.\n" "\n" "The Advanced button shows two more buttons to:\n" "\n" " * Generate auto install floppy: to create an install floppy disk that will\n" "automatically perform a whole installation without the help of an operator,\n" "similar to the installation you just configured.\n" "\n" " Note that two different options are available after clicking the button:\n" "\n" " * Replay: This is a partially automated install as the partitioning step " "(and\n" "only this one) remains interactive.\n" "\n" " * Automated: Fully automated install: the hard disk is completely " "rewritten, all\n" "data is lost.\n" "\n" " This feature is very handy when installing a great number of similar " "machines.\n" "See the Auto install section at our WebSite.\n" "\n" " * Save packages selection(*): saves the packages selection as made " "previously.\n" "Then when doing another install, insert the floppy inside the driver and run " "the\n" "install going to the help screen F1, and issuing >>linux defcfg=\"floppy" "\"<<.\n" "\n" "(*) You need a FAT formatted floppy (To create one under GNU/Linux type\n" "\"mformat a:\")" msgstr "" #: ../../help.pm_.c:283 msgid "" "Any partitions that have been newly defined must be formatted for use\n" "(formatting meaning creating a filesystem).\n" "\n" "At this time, you may wish to reformat some already existing partitions to " "erase\n" "the data they contain. If you wish do that, please also select the " "partitions\n" "you want to format.\n" "\n" "Please note that it is not necessary to reformat all pre-existing " "partitions.\n" "You must reformat the partitions containing the operating system (such as \"/" "\",\n" "\"/usr\" or \"/var\") but you do not have to reformat partitions containing " "data\n" "that you wish to keep (typically /home).\n" "\n" "Please be careful selecting partitions, after formatting, all data on the\n" "selected partitions will be deleted and you will not be able to recover any " "of\n" "them.\n" "\n" "Click on OK when you are ready to format partitions.\n" "\n" "Click on Cancel if you want to choose other partitions to install your new\n" "Mandrake Linux operating system.\n" "\n" "Click on Advanced to select partitions on which you want to check for bad\n" "blocks." msgstr "" #: ../../help.pm_.c:308 msgid "" "Your new Mandrake Linux operating system is currently being installed. This\n" "operation should take a few minutes (it depends on size you choose to " "install\n" "and the speed of your computer).\n" "\n" "Please be patient." msgstr "" #: ../../help.pm_.c:315 msgid "" "At this point, it is now time to choose the security level desired for that\n" "machine. As a rule of thumb, the more exposed is the machine, and the more " "the\n" "data stored in it is crucial the higher the security level should be. " "However a\n" "higher security level is generally obtained at the expenses of easiness of " "use.\n" "Refer to the chapter MSEC of the Reference Manual; to get more information " "about\n" "the meaning of those levels.\n" "\n" "If you don't know what to choose, keep the default option." msgstr "" #: ../../help.pm_.c:325 msgid "" "The Mandrake Linux spreads among several CDROMs. It may be that drakX has\n" "selected packages on another CDROM than the installation CDROM, and when it\n" "needs that you put another one into the drive, it will eject the current " "CDROM\n" "and ask you for another one." msgstr "" #: ../../help.pm_.c:331 msgid "" "drakX now ask you what installation class you want. Here, you will also " "choose\n" "whether you want to perform an installation or an upgrade of an existing\n" "Mandrake Linux system. Choose what suits your situation. You can perform an\n" "installation over an existing system, wiping out the old system. You can " "also do\n" "an upgrade to repair an existing system.\n" "\n" "Please choose \"Install\" if there are no previous version of Mandrake " "Linux\n" "installed or if you wish to use several operating systems.\n" "\n" "Please choose \"Update\" if you wish to update an already installed version " "of\n" "Mandrake Linux.\n" "\n" "Depend of your knowledge in GNU/Linux, you can choose one of the following\n" "levels to install or update your Mandrake Linux operating system:\n" "\n" " * Recommended: if you have never installed a GNU/Linux operating system " "choose\n" "this. Installation will be be very easy and you will be asked only on few\n" "questions.\n" "\n" " * Customized: if you are familiar enough with GNU/Linux, you may choose " "the\n" "primary usage (workstation, server, development) of your system. You will " "need\n" "to answer to more questions than in \"Recommended\" installation class, so " "you\n" "need to know how GNU/Linux works to choose this installation class.\n" "\n" " * Expert: if you have a good knowledge in GNU/Linux, you can choose this\n" "installation class. As in \"Customized\" installation class, you will be " "able to\n" "choose the primary usage (workstation, server, development). Be very " "careful\n" "before choose this installation class. You will be able to perform a higly\n" "customized installation. Answer to some questions can be very difficult if " "you\n" "haven't a good knowledge in GNU/Linux. So, don't choose this installation " "class\n" "unless you know what you are doing." msgstr "" #: ../../help.pm_.c:364 msgid "" "Normally, drakX will have selected the right keyboard for you (depending on " "the\n" "language you have chosen) and you won't even see this step. However, you " "might\n" "not have a keyboard which corresponds exactly to your language: for example, " "if\n" "you are an English speaking Swiss person, you may still want your keyboard " "to be\n" "a Swiss keyboard. Or if you speak English but are located in Quebec, you " "may\n" "find yourself in the same situation. In both cases, you will have to go back " "to\n" "this installation step and select an appropriate keyboard from the list.\n" "\n" "All you need to do is select your preferred keyboard layout from the list " "which\n" "appears in front of you.\n" "\n" "If you have a keyboard from another language than the one used by default, " "click\n" "on the Advanced button. You will be presented the complete list of " "supported\n" "keyboards." msgstr "" #: ../../help.pm_.c:380 msgid "" "Please choose your preferred language for installation and system usage.\n" "\n" "There is an Advanced button allowing you to select other languages, that " "will be\n" "installed in the machine so that you can use them later if you need them. If " "for\n" "example you will host people from Spain on your machine, select English as " "the\n" "main language in the tree view, and under the advanced section, check the " "box\n" "corresponding to Spanish|Spain.\n" "\n" "As soon as you have selected the language and confirmed with clicking the " "OK\n" "button, you will automatically go on to the next step." msgstr "" #: ../../help.pm_.c:392 msgid "" "drakX just skips this test unless you purposely click on the corresponding " "step\n" "on the left. By default, drakX sees your mouse as a two-button mouse and\n" "emulates the third button, and knows whether it's PS/2, serial or USB.\n" "\n" "Perhaps this is not what you want. In that case, you just have to select " "the\n" "right type for your mouse in the list which appears.\n" "\n" "You can now test your mouse. Use buttons and wheel to verify if settings " "are\n" "good. If not, you can click on \"Cancel\" to choose another driver." msgstr "" #: ../../help.pm_.c:403 msgid "" "This is the most crucial decision point for the security of your GNU/Linux\n" "system: you are going to have to enter the Root password. Root is the " "system\n" "administrator and is the only one authorized to make updates, add users, " "change\n" "the overall system configuration, and so on. In short, root can do " "everything!\n" "That is why you have to choose a password which is difficult to guess; " "drakX\n" "will tell you if it is too easy. As shown, you can choose not to enter a\n" "password, but we strongly advise you to enter one, if only for one reason: " "do\n" "not think that because you booted GNU/Linux, your other operating systems " "are\n" "safe from mistakes. That's not true since Root can overcome all limitations " "and\n" "unintentionally erase all data on partitions by carelessly accessing the\n" "partitions themselves!\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. It should never be written down.\n" "\n" "Do not make the password too long or complicated, though: you must be able " "to\n" "remember it without too much effort.\n" "\n" "You will have to type the password twice a typing error in the first " "attempt\n" "could be a problem if you repeat it since the ``incorrect'' password is now\n" "required when you connect up to the system.\n" "\n" "Depending on your local network configuration, you may or may not use NIS. " "If\n" "you don't know, ask your system administrator. If you use NIS, check the " "option\n" "Use NIS. When you press OK, you will then have to fill in the necessary\n" "information." msgstr "" #: ../../help.pm_.c:431 msgid "" "LILO and GRUB are boot loaders for GNU/Linux. This stage is normally " "totally\n" "automated. In fact, drakX will analyze the disk boot sector and will act\n" "accordingly depending on what it finds here:\n" "\n" " * if it finds a Windows boot sector, it will replace it with a GRUB/LILO " "boot\n" "sector so that you can start GNU/Linux or Windows;\n" "\n" " * if it finds a GRUB or LILO boot sector, it will replace it with a new " "one;\n" "\n" "If in doubt, drakX will display a dialog with various options.\n" "\n" " * Bootloader to use: you get here three choices:\n" "\n" " * LILO with graphical menu: if you prefer LILO with its graphical " "interface.\n" "\n" " * Grub: if you prefer GRUB (text menu).\n" "\n" " * LILO with text menu: if you prefer LILO with its text menu interface.\n" "\n" " * Boot device: In most cases, you will not change the default (/dev/hda), " "but if\n" "you prefer, the bootloader can be installed on the second hard drive (/dev/" "hdb),\n" "or even on a floppy disk (/dev/fd0).\n" "\n" " * Delay before booting default image: When rebooting the computer, this is " "the\n" "delay granted to the user to choose in the boot loader menu, another boot " "entry\n" "than the default one.\n" "\n" "!! Beware that if you choose not to install a bootloader (by selecting " "Cancel\n" "here), you must ensure that you have a way to boot your Mandrake Linux " "system!\n" "Also be sure about what you are doing if you change any of the options " "here. !!\n" "\n" "Clicking the Advanced button in this dialog will offer many advanced " "options\n" "reserved to the expert user.\n" "\n" "Mandrake Linux installs its own bootloader, which will let you boot either\n" "GNU/Linux or any other operating systems which you have on your system.\n" "\n" "If there is another operating system installed on your machine, it'll be\n" "automatically added to the boot menu. Here you can choose to fine-tune the\n" "existing options. Double-clicking on an existing entry allows you to change " "its\n" "parameters or remove it; Add creates a new entry; and Done goes onto next\n" "installation step." msgstr "" #: ../../help.pm_.c:475 msgid "" "drakX then goes on to detecting all hard disks present on your computer. It " "will\n" "also scan for one or more PCI SCSI card(s) on your system, if you have any. " "If\n" "such a device is found, drakX will automatically install the right driver.\n" "\n" "Should it fail, you are anyway asked whether you have a SCSI card or not. " "Answer\n" "Yes to choose your card in a list or No if you have no SCSI hardware. If you " "are\n" "not sure you can also check the list of hardware in your machine by " "selecting\n" "See hardware info and clicking OK.\n" "\n" "If you have to manually specify your adapter, DrakX will ask if you want to\n" "specify options for it. You should allow DrakX to probe the hardware for " "the\n" "options. This usually works well.\n" "\n" "If not, you will need to provide options to the driver. Please review the " "User\n" "Guide (chapter 3, section \"Collective informations on your hardware\") for\n" "hints on retrieving this information from hardware documentation, from the\n" "manufacturer's Web site (if you have Internet access) or from Microsoft " "Windows\n" "(if you have it on your system)." msgstr "" #: ../../help.pm_.c:495 msgid "" "Here are presented various parameters related to your machine. Depending on " "your\n" "installed hardware you may or not, see the following entries:\n" "\n" " * Mouse: mouse Check the current mouse configuration and click on the " "button to\n" "change it if necessary.\n" "\n" " * Keyboard: keyboard Check the current keyboard map configuration and click " "on\n" "the button to change that if necessary.\n" "\n" " * Timezone: timezone DrakX, by default, guesses your timezone from the " "language\n" "you have chosen. But here again, as for the keyboard choice, you may not be " "in\n" "the country which the chosen language suggests, so you may need to click on " "the\n" "Timezone button so that you can configure the clock according to the time " "zone\n" "you are in.\n" "\n" " * Printer: Clicking on the No Printer button, will open the printer\n" "configuration wizard..\n" "\n" " * Sound card: If a sound card has been detected on your system, it is " "displayed\n" "here. No modification possible at installation time.\n" "\n" " * TV card: If a TV card has been detected on your system, it is displayed " "here.\n" "No modification possible at installation time.\n" "\n" " * ISDN card: If an ISDN card has been detected on your system, it is " "displayed\n" "here. You can click on the button to change the associated parameters." msgstr "" #: ../../install_any.pm_.c:420 #, c-format msgid "" "You have selected the following server(s): %s\n" "\n" "\n" "These servers are activated by default. They don't have any known security\n" "issues, but some new could be found. In that case, you must make sure to " "upgrade\n" "as soon as possible.\n" "\n" "\n" "Do you really want to install these servers?\n" msgstr "" #: ../../install_any.pm_.c:456 msgid "Can't use broadcast with no NIS domain" msgstr "" #: ../../install_any.pm_.c:790 #, c-format msgid "Insert a FAT formatted floppy in drive %s" msgstr "" #: ../../install_any.pm_.c:794 msgid "This floppy is not FAT formatted" msgstr "" #: ../../install_any.pm_.c:806 msgid "" "To use this saved packages selection, boot installation with ``linux " "defcfg=floppy''" msgstr "" #: ../../install_any.pm_.c:828 ../../partition_table.pm_.c:723 #, c-format msgid "Error reading file %s" msgstr "" #: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:315 #: ../../interactive.pm_.c:105 ../../interactive.pm_.c:120 #: ../../interactive.pm_.c:284 ../../interactive.pm_.c:304 #: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170 #: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:414 #: ../../my_gtk.pm_.c:675 ../../my_gtk.pm_.c:697 msgid "Ok" msgstr "" #: ../../install_gtk.pm_.c:473 msgid "Please test the mouse" msgstr "" #: ../../install_gtk.pm_.c:474 msgid "To activate the mouse," msgstr "" #: ../../install_gtk.pm_.c:475 msgid "MOVE YOUR WHEEL!" msgstr "" #: ../../install_interactive.pm_.c:23 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" #: ../../install_interactive.pm_.c:41 msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" #: ../../install_interactive.pm_.c:46 ../../install_steps_graphical.pm_.c:259 msgid "You must have a swap partition" msgstr "" #: ../../install_interactive.pm_.c:47 ../../install_steps_graphical.pm_.c:261 msgid "" "You don't have a swap partition\n" "\n" "Continue anyway?" msgstr "" #: ../../install_interactive.pm_.c:50 ../../install_steps.pm_.c:165 msgid "You must have a FAT partition mounted in /boot/efi" msgstr "" #: ../../install_interactive.pm_.c:73 msgid "Use free space" msgstr "" #: ../../install_interactive.pm_.c:75 msgid "Not enough free space to allocate new partitions" msgstr "" #: ../../install_interactive.pm_.c:83 msgid "Use existing partition" msgstr "" #: ../../install_interactive.pm_.c:85 msgid "There is no existing partition to use" msgstr "" #: ../../install_interactive.pm_.c:92 msgid "Use the Windows partition for loopback" msgstr "" #: ../../install_interactive.pm_.c:95 msgid "Which partition do you want to use for Linux4Win?" msgstr "" #: ../../install_interactive.pm_.c:97 msgid "Choose the sizes" msgstr "" #: ../../install_interactive.pm_.c:98 msgid "Root partition size in MB: " msgstr "" #: ../../install_interactive.pm_.c:99 msgid "Swap partition size in MB: " msgstr "" #: ../../install_interactive.pm_.c:107 msgid "Use the free space on the Windows partition" msgstr "" #: ../../install_interactive.pm_.c:110 msgid "Which partition do you want to resize?" msgstr "" #: ../../install_interactive.pm_.c:112 msgid "Computing Windows filesystem bounds" msgstr "" #: ../../install_interactive.pm_.c:115 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occured: %s" msgstr "" #: ../../install_interactive.pm_.c:118 msgid "Your Windows partition is too fragmented, please run ``defrag'' first" msgstr "" #: ../../install_interactive.pm_.c:119 msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful: this operation is\n" "dangerous. If you have not already done so, you should first exit the\n" "installation, run scandisk under Windows (and optionally run defrag), then\n" "restart the installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" #: ../../install_interactive.pm_.c:128 msgid "Which size do you want to keep for windows on" msgstr "" #: ../../install_interactive.pm_.c:129 #, c-format msgid "partition %s" msgstr "" #: ../../install_interactive.pm_.c:135 #, c-format msgid "FAT resizing failed: %s" msgstr "" #: ../../install_interactive.pm_.c:150 msgid "" "There is no FAT partitions to resize or to use as loopback (or not enough " "space left)" msgstr "" #: ../../install_interactive.pm_.c:156 msgid "Erase entire disk" msgstr "" #: ../../install_interactive.pm_.c:156 msgid "Remove Windows(TM)" msgstr "" #: ../../install_interactive.pm_.c:159 msgid "You have more than one hard drive, which one do you install linux on?" msgstr "" #: ../../install_interactive.pm_.c:162 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "" #: ../../install_interactive.pm_.c:170 msgid "Custom disk partitioning" msgstr "" #: ../../install_interactive.pm_.c:174 msgid "Use fdisk" msgstr "" #: ../../install_interactive.pm_.c:177 #, c-format msgid "" "You can now partition %s.\n" "When you are done, don't forget to save using `w'" msgstr "" #: ../../install_interactive.pm_.c:206 msgid "You don't have enough free space on your Windows partition" msgstr "" #: ../../install_interactive.pm_.c:222 msgid "I can't find any room for installing" msgstr "" #: ../../install_interactive.pm_.c:226 msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "" #: ../../install_interactive.pm_.c:231 #, c-format msgid "Partitioning failed: %s" msgstr "" #: ../../install_interactive.pm_.c:237 msgid "Bringing up the network" msgstr "" #: ../../install_interactive.pm_.c:242 msgid "Bringing down the network" msgstr "" #: ../../install_steps.pm_.c:73 msgid "" "An error occurred, but I don't know how to handle it nicely.\n" "Continue at your own risk." msgstr "" #: ../../install_steps.pm_.c:207 #, c-format msgid "Duplicate mount point %s" msgstr "" #: ../../install_steps.pm_.c:384 msgid "" "Some important packages didn't get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm" "\"\n" msgstr "" #: ../../install_steps.pm_.c:449 #, c-format msgid "Welcome to %s" msgstr "" #: ../../install_steps.pm_.c:493 ../../install_steps.pm_.c:696 msgid "No floppy drive available" msgstr "" #: ../../install_steps_auto_install.pm_.c:77 #: ../../install_steps_stdio.pm_.c:23 #, c-format msgid "Entering step `%s'\n" msgstr "" #: ../../install_steps_graphical.pm_.c:287 msgid "Choose the size you want to install" msgstr "" #: ../../install_steps_graphical.pm_.c:334 msgid "Total size: " msgstr "" #: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:376 #, c-format msgid "Version: %s\n" msgstr "" #: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:377 #, c-format msgid "Size: %d KB\n" msgstr "" #: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:470 #: ../../install_steps_interactive.pm_.c:509 msgid "Choose the packages you want to install" msgstr "" #: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:568 msgid "Info" msgstr "" #: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:446 #: ../../install_steps_interactive.pm_.c:212 msgid "Install" msgstr "" #: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:486 #: ../../install_steps_interactive.pm_.c:695 msgid "Installing" msgstr "" #: ../../install_steps_graphical.pm_.c:499 msgid "Please wait, " msgstr "" #: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:499 msgid "Time remaining " msgstr "" #: ../../install_steps_graphical.pm_.c:502 msgid "Total time " msgstr "" #: ../../install_steps_graphical.pm_.c:507 #: ../../install_steps_interactive.pm_.c:695 msgid "Preparing installation" msgstr "" #: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:547 #, c-format msgid "Installing package %s" msgstr "" #: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:624 #: ../../install_steps_gtk.pm_.c:628 msgid "Go on anyway?" msgstr "" #: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:624 msgid "There was an error ordering packages:" msgstr "" #: ../../install_steps_graphical.pm_.c:577 msgid "Use existing configuration for X11?" msgstr "" #: ../../install_steps_gtk.pm_.c:147 msgid "" "Your system is low on resource. You may have some problem installing\n" "Mandrake Linux. If that occurs, you can try a text install instead. For " "this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" #: ../../install_steps_gtk.pm_.c:161 msgid "Please, choose one of the following classes of installation:" msgstr "" #: ../../install_steps_gtk.pm_.c:227 #, c-format msgid "" "The total size for the groups you have selected is approximately %d MB.\n" msgstr "" #: ../../install_steps_gtk.pm_.c:229 #, c-format msgid "" "If you wish to install less than this size,\n" "select the percentage of packages that you want to install.\n" "\n" "A low percentage will install only the most important packages;\n" "a percentage of 100%% will install all selected packages." msgstr "" #: ../../install_steps_gtk.pm_.c:234 #, c-format msgid "" "You have space on your disk for only %d%% of these packages.\n" "\n" "If you wish to install less than this,\n" "select the percentage of packages that you want to install.\n" "A low percentage will install only the most important packages;\n" "a percentage of %d%% will install as many packages as possible." msgstr "" #: ../../install_steps_gtk.pm_.c:240 msgid "You will be able to choose them more specifically in the next step." msgstr "" #: ../../install_steps_gtk.pm_.c:242 msgid "Percentage of packages to install" msgstr "" #: ../../install_steps_gtk.pm_.c:290 ../../install_steps_interactive.pm_.c:619 msgid "Package Group Selection" msgstr "" #: ../../install_steps_gtk.pm_.c:310 ../../install_steps_interactive.pm_.c:634 msgid "Individual package selection" msgstr "" #: ../../install_steps_gtk.pm_.c:333 ../../install_steps_interactive.pm_.c:598 #, c-format msgid "Total size: %d / %d MB" msgstr "" #: ../../install_steps_gtk.pm_.c:374 msgid "Bad package" msgstr "" #: ../../install_steps_gtk.pm_.c:375 #, c-format msgid "Name: %s\n" msgstr "" #: ../../install_steps_gtk.pm_.c:378 #, c-format msgid "Importance: %s\n" msgstr "" #: ../../install_steps_gtk.pm_.c:400 msgid "" "You can't select this package as there is not enough space left to install it" msgstr "" #: ../../install_steps_gtk.pm_.c:405 msgid "The following packages are going to be installed" msgstr "" #: ../../install_steps_gtk.pm_.c:406 msgid "The following packages are going to be removed" msgstr "" #: ../../install_steps_gtk.pm_.c:418 msgid "You can't select/unselect this package" msgstr "" #: ../../install_steps_gtk.pm_.c:430 msgid "This is a mandatory package, it can't be unselected" msgstr "" #: ../../install_steps_gtk.pm_.c:432 msgid "You can't unselect this package. It is already installed" msgstr "" #: ../../install_steps_gtk.pm_.c:436 msgid "" "This package must be upgraded\n" "Are you sure you want to deselect it?" msgstr "" #: ../../install_steps_gtk.pm_.c:440 msgid "You can't unselect this package. It must be upgraded" msgstr "" #: ../../install_steps_gtk.pm_.c:445 msgid "Show automatically selected packages" msgstr "" #: ../../install_steps_gtk.pm_.c:449 msgid "Load/Save on floppy" msgstr "" #: ../../install_steps_gtk.pm_.c:450 msgid "Updating package selection" msgstr "" #: ../../install_steps_gtk.pm_.c:455 msgid "Minimal install" msgstr "" #: ../../install_steps_gtk.pm_.c:492 msgid "Estimating" msgstr "" #: ../../install_steps_gtk.pm_.c:511 msgid "Please wait, preparing installation" msgstr "" #: ../../install_steps_gtk.pm_.c:542 #, c-format msgid "%d packages" msgstr "" #: ../../install_steps_gtk.pm_.c:581 msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" #: ../../install_steps_gtk.pm_.c:609 ../../install_steps_interactive.pm_.c:148 msgid "Accept" msgstr "" #: ../../install_steps_gtk.pm_.c:609 ../../install_steps_interactive.pm_.c:148 msgid "Refuse" msgstr "" #: ../../install_steps_gtk.pm_.c:610 #, c-format msgid "" "Change your Cd-Rom!\n" "\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you don't have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" #: ../../install_steps_gtk.pm_.c:628 msgid "There was an error installing packages:" msgstr "" #: ../../install_steps_interactive.pm_.c:37 msgid "An error occurred" msgstr "" #: ../../install_steps_interactive.pm_.c:71 msgid "License agreement" msgstr "" #: ../../install_steps_interactive.pm_.c:72 msgid "" "Introduction\n" "\n" "The operating system and the different components available in the Mandrake " "Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandrake Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read carefully this document. This document is a license agreement " "between you and \n" "MandrakeSoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if MandrakeSoft S.A. has been advised of the possibility or " "occurance of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandrake Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to MandrakeSoft.\n" "The programs developed by MandrakeSoft S.A. are governed by the GPL License. " "Documentation written \n" "by MandrakeSoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "MandrakeSoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of " "MandrakeSoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact MandrakeSoft S.A. \n" msgstr "" #: ../../install_steps_interactive.pm_.c:168 #: ../../install_steps_interactive.pm_.c:867 #: ../../standalone/keyboarddrake_.c:28 msgid "Keyboard" msgstr "" #: ../../install_steps_interactive.pm_.c:169 #: ../../standalone/keyboarddrake_.c:29 msgid "Please, choose your keyboard layout." msgstr "" #: ../../install_steps_interactive.pm_.c:170 msgid "Here is the full list of keyboards available" msgstr "" #: ../../install_steps_interactive.pm_.c:171 msgid "More" msgstr "" #: ../../install_steps_interactive.pm_.c:187 msgid "Install Class" msgstr "" #: ../../install_steps_interactive.pm_.c:187 msgid "Which installation class do you want?" msgstr "" #: ../../install_steps_interactive.pm_.c:189 msgid "Install/Update" msgstr "" #: ../../install_steps_interactive.pm_.c:189 msgid "Is this an install or an update?" msgstr "" #: ../../install_steps_interactive.pm_.c:198 msgid "Recommended" msgstr "" #: ../../install_steps_interactive.pm_.c:201 #: ../../install_steps_interactive.pm_.c:204 msgid "Expert" msgstr "" #: ../../install_steps_interactive.pm_.c:212 msgid "Update" msgstr "" #: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48 msgid "Please, choose the type of your mouse." msgstr "" #: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64 msgid "Mouse Port" msgstr "" #: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65 msgid "Please choose on which serial port your mouse is connected to." msgstr "" #: ../../install_steps_interactive.pm_.c:239 msgid "Buttons emulation" msgstr "" #: ../../install_steps_interactive.pm_.c:241 msgid "Button 2 Emulation" msgstr "" #: ../../install_steps_interactive.pm_.c:242 msgid "Button 3 Emulation" msgstr "" #: ../../install_steps_interactive.pm_.c:261 msgid "Configuring PCMCIA cards..." msgstr "" #: ../../install_steps_interactive.pm_.c:261 msgid "PCMCIA" msgstr "" #: ../../install_steps_interactive.pm_.c:266 msgid "Configuring IDE" msgstr "" #: ../../install_steps_interactive.pm_.c:266 msgid "IDE" msgstr "" #: ../../install_steps_interactive.pm_.c:281 msgid "no available partitions" msgstr "" #: ../../install_steps_interactive.pm_.c:284 msgid "Scanning partitions to find mount points" msgstr "" #: ../../install_steps_interactive.pm_.c:292 msgid "Choose the mount points" msgstr "" #: ../../install_steps_interactive.pm_.c:311 #, c-format msgid "" "I can't read your partition table, it's too corrupted for me :(\n" "I can try to go on blanking bad partitions (ALL DATA will be lost!).\n" "The other solution is to disallow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to loose all the partitions?\n" msgstr "" #: ../../install_steps_interactive.pm_.c:324 msgid "" "DiskDrake failed to read correctly the partition table.\n" "Continue at your own risk!" msgstr "" #: ../../install_steps_interactive.pm_.c:340 msgid "" "No free space for 1MB bootstrap! Install will continue, but to boot your " "system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" #: ../../install_steps_interactive.pm_.c:349 msgid "No root partition found to perform an upgrade" msgstr "" #: ../../install_steps_interactive.pm_.c:350 msgid "Root Partition" msgstr "" #: ../../install_steps_interactive.pm_.c:351 msgid "What is the root partition (/) of your system?" msgstr "" #: ../../install_steps_interactive.pm_.c:365 msgid "You need to reboot for the partition table modifications to take place" msgstr "" #: ../../install_steps_interactive.pm_.c:389 msgid "Choose the partitions you want to format" msgstr "" #: ../../install_steps_interactive.pm_.c:390 msgid "Check bad blocks?" msgstr "" #: ../../install_steps_interactive.pm_.c:416 msgid "Formatting partitions" msgstr "" #: ../../install_steps_interactive.pm_.c:418 #, c-format msgid "Creating and formatting file %s" msgstr "" #: ../../install_steps_interactive.pm_.c:421 msgid "Not enough swap to fulfill installation, please add some" msgstr "" #: ../../install_steps_interactive.pm_.c:427 msgid "Looking for available packages" msgstr "" #: ../../install_steps_interactive.pm_.c:433 msgid "Finding packages to upgrade" msgstr "" #: ../../install_steps_interactive.pm_.c:450 #, c-format msgid "" "Your system has not enough space left for installation or upgrade (%d > %d)" msgstr "" #: ../../install_steps_interactive.pm_.c:469 #, c-format msgid "Complete (%dMB)" msgstr "" #: ../../install_steps_interactive.pm_.c:469 #, c-format msgid "Minimum (%dMB)" msgstr "" #: ../../install_steps_interactive.pm_.c:469 #, c-format msgid "Recommended (%dMB)" msgstr "" #: ../../install_steps_interactive.pm_.c:475 msgid "Custom" msgstr "" #: ../../install_steps_interactive.pm_.c:522 msgid "" "Please choose load or save package selection on floppy.\n" "The format is the same as auto_install generated floppies." msgstr "" #: ../../install_steps_interactive.pm_.c:525 msgid "Load from floppy" msgstr "" #: ../../install_steps_interactive.pm_.c:527 msgid "Loading from floppy" msgstr "" #: ../../install_steps_interactive.pm_.c:527 msgid "Package selection" msgstr "" #: ../../install_steps_interactive.pm_.c:532 msgid "Insert a floppy containing package selection" msgstr "" #: ../../install_steps_interactive.pm_.c:544 msgid "Save on floppy" msgstr "" #: ../../install_steps_interactive.pm_.c:605 msgid "Selected size is larger than available space" msgstr "" #: ../../install_steps_interactive.pm_.c:670 msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" #: ../../install_steps_interactive.pm_.c:675 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "" #: ../../install_steps_interactive.pm_.c:704 #, c-format msgid "" "Installing package %s\n" "%d%%" msgstr "" #: ../../install_steps_interactive.pm_.c:713 msgid "Post-install configuration" msgstr "" #: ../../install_steps_interactive.pm_.c:719 #, c-format msgid "Please insert the Boot floppy used in drive %s" msgstr "" #: ../../install_steps_interactive.pm_.c:725 #, c-format msgid "Please insert the Update Modules floppy in drive %s" msgstr "" #: ../../install_steps_interactive.pm_.c:750 msgid "" "You have now the possibility to download software aimed for encryption.\n" "\n" "WARNING:\n" "\n" "Due to different general requirements applicable to these software and " "imposed\n" "by various jurisdictions, customer and/or end user of theses software " "should\n" "ensure that the laws of his/their jurisdiction allow him/them to download, " "stock\n" "and/or use these software.\n" "\n" "In addition customer and/or end user shall particularly be aware to not " "infringe\n" "the laws of his/their jurisdiction. Should customer and/or end user not\n" "respect the provision of these applicable laws, he/they will incure serious\n" "sanctions.\n" "\n" "In no event shall Mandrakesoft nor its manufacturers and/or suppliers be " "liable\n" "for special, indirect or incidental damages whatsoever (including, but not\n" "limited to loss of profits, business interruption, loss of commercial data " "and\n" "other pecuniary losses, and eventual liabilities and indemnification to be " "paid\n" "pursuant to a court decision) arising out of use, possession, or the sole\n" "downloading of these software, to which customer and/or end user could\n" "eventually have access after having sign up the present agreement.\n" "\n" "\n" "For any queries relating to these agreement, please contact \n" "Mandrakesoft, Inc.\n" "2400 N. Lincoln Avenue Suite 243\n" "Altadena California 91001\n" "USA" msgstr "" #: ../../install_steps_interactive.pm_.c:782 msgid "Choose a mirror from which to get the packages" msgstr "" #: ../../install_steps_interactive.pm_.c:793 msgid "Contacting the mirror to get the list of available packages" msgstr "" #: ../../install_steps_interactive.pm_.c:796 msgid "Please choose the packages you want to install." msgstr "" #: ../../install_steps_interactive.pm_.c:808 msgid "Which is your timezone?" msgstr "" #: ../../install_steps_interactive.pm_.c:813 msgid "Hardware clock set to GMT" msgstr "" #: ../../install_steps_interactive.pm_.c:814 msgid "Automatic time synchronization (using NTP)" msgstr "" #: ../../install_steps_interactive.pm_.c:821 msgid "NTP Server" msgstr "" #: ../../install_steps_interactive.pm_.c:855 ../../printerdrake.pm_.c:81 msgid "Remote CUPS server" msgstr "" #: ../../install_steps_interactive.pm_.c:856 msgid "No printer" msgstr "" #: ../../install_steps_interactive.pm_.c:863 ../../steps.pm_.c:27 msgid "Summary" msgstr "" #: ../../install_steps_interactive.pm_.c:866 msgid "Mouse" msgstr "" #: ../../install_steps_interactive.pm_.c:868 msgid "Timezone" msgstr "" #: ../../install_steps_interactive.pm_.c:869 ../../printerdrake.pm_.c:1201 #: ../../printerdrake.pm_.c:1256 msgid "Printer" msgstr "" #: ../../install_steps_interactive.pm_.c:871 msgid "ISDN card" msgstr "" #: ../../install_steps_interactive.pm_.c:874 msgid "Sound card" msgstr "" #: ../../install_steps_interactive.pm_.c:877 msgid "TV card" msgstr "" #: ../../install_steps_interactive.pm_.c:913 #: ../../install_steps_interactive.pm_.c:937 #: ../../install_steps_interactive.pm_.c:941 msgid "LDAP" msgstr "" #: ../../install_steps_interactive.pm_.c:914 #: ../../install_steps_interactive.pm_.c:937 #: ../../install_steps_interactive.pm_.c:950 msgid "NIS" msgstr "" #: ../../install_steps_interactive.pm_.c:915 #: ../../install_steps_interactive.pm_.c:937 msgid "Local files" msgstr "" #: ../../install_steps_interactive.pm_.c:924 #: ../../install_steps_interactive.pm_.c:925 ../../steps.pm_.c:24 msgid "Set root password" msgstr "" #: ../../install_steps_interactive.pm_.c:926 msgid "No password" msgstr "" #: ../../install_steps_interactive.pm_.c:931 #, c-format msgid "This password is too simple (must be at least %d characters long)" msgstr "" #: ../../install_steps_interactive.pm_.c:937 ../../network/modem.pm_.c:47 #: ../../standalone/draknet_.c:596 msgid "Authentication" msgstr "" #: ../../install_steps_interactive.pm_.c:945 msgid "Authentication LDAP" msgstr "" #: ../../install_steps_interactive.pm_.c:946 msgid "LDAP Base dn" msgstr "" #: ../../install_steps_interactive.pm_.c:947 msgid "LDAP Server" msgstr "" #: ../../install_steps_interactive.pm_.c:953 msgid "Authentication NIS" msgstr "" #: ../../install_steps_interactive.pm_.c:954 msgid "NIS Domain" msgstr "" #: ../../install_steps_interactive.pm_.c:955 msgid "NIS Server" msgstr "" #: ../../install_steps_interactive.pm_.c:990 msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "SILO on your system, or another operating system removes SILO, or SILO " "doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures.\n" "\n" "If you want to create a bootdisk for your system, insert a floppy in the " "first\n" "drive and press \"Ok\"." msgstr "" #: ../../install_steps_interactive.pm_.c:1006 msgid "First floppy drive" msgstr "" #: ../../install_steps_interactive.pm_.c:1007 msgid "Second floppy drive" msgstr "" #: ../../install_steps_interactive.pm_.c:1008 ../../printerdrake.pm_.c:1058 msgid "Skip" msgstr "" #: ../../install_steps_interactive.pm_.c:1013 msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "LILO (or grub) on your system, or another operating system removes LILO, or " "LILO doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures. Would you like to create a bootdisk for your system?" msgstr "" #: ../../install_steps_interactive.pm_.c:1022 msgid "Sorry, no floppy drive available" msgstr "" #: ../../install_steps_interactive.pm_.c:1026 msgid "Choose the floppy drive you want to use to make the bootdisk" msgstr "" #: ../../install_steps_interactive.pm_.c:1030 #, c-format msgid "Insert a floppy in drive %s" msgstr "" #: ../../install_steps_interactive.pm_.c:1033 msgid "Creating bootdisk" msgstr "" #: ../../install_steps_interactive.pm_.c:1040 msgid "Preparing bootloader" msgstr "" #: ../../install_steps_interactive.pm_.c:1051 msgid "" "You appear to have an OldWorld or Unknown\n" " machine, the yaboot bootloader will not work for you.\n" "The install will continue, but you'll\n" " need to use BootX to boot your machine" msgstr "" #: ../../install_steps_interactive.pm_.c:1056 msgid "Do you want to use aboot?" msgstr "" #: ../../install_steps_interactive.pm_.c:1059 msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" #: ../../install_steps_interactive.pm_.c:1066 msgid "Installing bootloader" msgstr "" #: ../../install_steps_interactive.pm_.c:1071 msgid "Installation of bootloader failed. The following error occured:" msgstr "" #: ../../install_steps_interactive.pm_.c:1079 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you don't see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" #: ../../install_steps_interactive.pm_.c:1087 ../../standalone/draksec_.c:23 msgid "Low" msgstr "" #: ../../install_steps_interactive.pm_.c:1088 ../../standalone/draksec_.c:24 msgid "Medium" msgstr "" #: ../../install_steps_interactive.pm_.c:1089 ../../standalone/draksec_.c:25 msgid "High" msgstr "" #: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:62 msgid "Choose security level" msgstr "" #: ../../install_steps_interactive.pm_.c:1129 #: ../../standalone/drakautoinst_.c:80 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "" #: ../../install_steps_interactive.pm_.c:1133 #: ../../standalone/drakautoinst_.c:82 msgid "Creating auto install floppy" msgstr "" #: ../../install_steps_interactive.pm_.c:1144 msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" #: ../../install_steps_interactive.pm_.c:1155 msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "For information on fixes which are available for this release of Mandrake " "Linux,\n" "consult the Errata available from http://www.mandrakelinux.com/.\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Mandrake Linux User's Guide." msgstr "" #: ../../install_steps_interactive.pm_.c:1167 msgid "Generate auto install floppy" msgstr "" #: ../../install_steps_interactive.pm_.c:1169 msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" "(this is meant for installing on another box).\n" "\n" "You may prefer to replay the installation.\n" msgstr "" #: ../../install_steps_interactive.pm_.c:1174 msgid "Automated" msgstr "" #: ../../install_steps_interactive.pm_.c:1174 msgid "Replay" msgstr "" #: ../../install_steps_interactive.pm_.c:1177 msgid "Save packages selection" msgstr "" #: ../../install_steps_newt.pm_.c:22 #, c-format msgid "Mandrake Linux Installation %s" msgstr "" #: ../../install_steps_newt.pm_.c:34 msgid "" " / between elements | selects | next screen " msgstr "" #: ../../interactive.pm_.c:71 msgid "kdesu missing" msgstr "" #: ../../interactive.pm_.c:130 msgid "Choose a file" msgstr "" #: ../../interactive.pm_.c:282 msgid "Advanced" msgstr "" #: ../../interactive.pm_.c:341 msgid "Please wait" msgstr "" #: ../../interactive_gtk.pm_.c:678 msgid "Expand Tree" msgstr "" #: ../../interactive_gtk.pm_.c:679 msgid "Collapse Tree" msgstr "" #: ../../interactive_gtk.pm_.c:680 msgid "Toggle between flat and group sorted" msgstr "" #: ../../interactive_stdio.pm_.c:35 #, c-format msgid "Ambiguity (%s), be more precise\n" msgstr "" #: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51 #: ../../interactive_stdio.pm_.c:71 msgid "Bad choice, try again\n" msgstr "" #: ../../interactive_stdio.pm_.c:39 #, c-format msgid " ? (default %s) " msgstr "" #: ../../interactive_stdio.pm_.c:52 #, c-format msgid "Your choice? (default %s) " msgstr "" #: ../../interactive_stdio.pm_.c:72 #, c-format msgid "Your choice? (default %s enter `none' for none) " msgstr "" #: ../../keyboard.pm_.c:139 ../../keyboard.pm_.c:177 msgid "Czech (QWERTZ)" msgstr "" #: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:154 ../../keyboard.pm_.c:179 msgid "German" msgstr "" #: ../../keyboard.pm_.c:141 msgid "Dvorak" msgstr "" #: ../../keyboard.pm_.c:142 ../../keyboard.pm_.c:185 msgid "Spanish" msgstr "" #: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186 msgid "Finnish" msgstr "" #: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:187 msgid "French" msgstr "" #: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:210 msgid "Norwegian" msgstr "" #: ../../keyboard.pm_.c:146 msgid "Polish" msgstr "" #: ../../keyboard.pm_.c:147 ../../keyboard.pm_.c:218 msgid "Russian" msgstr "" #: ../../keyboard.pm_.c:149 ../../keyboard.pm_.c:220 msgid "Swedish" msgstr "" #: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:235 msgid "UK keyboard" msgstr "" #: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:236 msgid "US keyboard" msgstr "" #: ../../keyboard.pm_.c:158 msgid "Albanian" msgstr "" #: ../../keyboard.pm_.c:159 msgid "Armenian (old)" msgstr "" #: ../../keyboard.pm_.c:160 msgid "Armenian (typewriter)" msgstr "" #: ../../keyboard.pm_.c:161 msgid "Armenian (phonetic)" msgstr "" #: ../../keyboard.pm_.c:166 msgid "Azerbaidjani (latin)" msgstr "" #: ../../keyboard.pm_.c:168 msgid "Belgian" msgstr "" #: ../../keyboard.pm_.c:169 msgid "Bulgarian" msgstr "" #: ../../keyboard.pm_.c:170 msgid "Brazilian (ABNT-2)" msgstr "" #: ../../keyboard.pm_.c:171 msgid "Belarusian" msgstr "" #: ../../keyboard.pm_.c:172 msgid "Swiss (German layout)" msgstr "" #: ../../keyboard.pm_.c:173 msgid "Swiss (French layout)" msgstr "" #: ../../keyboard.pm_.c:178 msgid "Czech (QWERTY)" msgstr "" #: ../../keyboard.pm_.c:180 msgid "German (no dead keys)" msgstr "" #: ../../keyboard.pm_.c:181 msgid "Danish" msgstr "" #: ../../keyboard.pm_.c:182 msgid "Dvorak (US)" msgstr "" #: ../../keyboard.pm_.c:183 msgid "Dvorak (Norwegian)" msgstr "" #: ../../keyboard.pm_.c:184 msgid "Estonian" msgstr "" #: ../../keyboard.pm_.c:188 msgid "Georgian (\"Russian\" layout)" msgstr "" #: ../../keyboard.pm_.c:189 msgid "Georgian (\"Latin\" layout)" msgstr "" #: ../../keyboard.pm_.c:190 msgid "Greek" msgstr "" #: ../../keyboard.pm_.c:191 msgid "Hungarian" msgstr "" #: ../../keyboard.pm_.c:192 msgid "Croatian" msgstr "" #: ../../keyboard.pm_.c:193 msgid "Israeli" msgstr "" #: ../../keyboard.pm_.c:194 msgid "Israeli (Phonetic)" msgstr "" #: ../../keyboard.pm_.c:195 msgid "Iranian" msgstr "" #: ../../keyboard.pm_.c:196 msgid "Icelandic" msgstr "" #: ../../keyboard.pm_.c:197 msgid "Italian" msgstr "" #: ../../keyboard.pm_.c:199 msgid "Japanese 106 keys" msgstr "" #: ../../keyboard.pm_.c:200 msgid "Korean keyboard" msgstr "" #: ../../keyboard.pm_.c:201 msgid "Latin American" msgstr "" #: ../../keyboard.pm_.c:202 msgid "Lithuanian AZERTY (old)" msgstr "" #: ../../keyboard.pm_.c:204 msgid "Lithuanian AZERTY (new)" msgstr "" #: ../../keyboard.pm_.c:205 msgid "Lithuanian \"number row\" QWERTY" msgstr "" #: ../../keyboard.pm_.c:206 msgid "Lithuanian \"phonetic\" QWERTY" msgstr "" #: ../../keyboard.pm_.c:207 msgid "Latvian" msgstr "" #: ../../keyboard.pm_.c:208 msgid "Macedonian" msgstr "" #: ../../keyboard.pm_.c:209 msgid "Dutch" msgstr "" #: ../../keyboard.pm_.c:211 msgid "Polish (qwerty layout)" msgstr "" #: ../../keyboard.pm_.c:212 msgid "Polish (qwertz layout)" msgstr "" #: ../../keyboard.pm_.c:213 msgid "Portuguese" msgstr "" #: ../../keyboard.pm_.c:214 msgid "Canadian (Quebec)" msgstr "" #: ../../keyboard.pm_.c:216 msgid "Romanian (qwertz)" msgstr "" #: ../../keyboard.pm_.c:217 msgid "Romanian (qwerty)" msgstr "" #: ../../keyboard.pm_.c:219 msgid "Russian (Yawerty)" msgstr "" #: ../../keyboard.pm_.c:221 msgid "Slovenian" msgstr "" #: ../../keyboard.pm_.c:225 msgid "Slovakian (QWERTZ)" msgstr "" #: ../../keyboard.pm_.c:226 msgid "Slovakian (QWERTY)" msgstr "" #: ../../keyboard.pm_.c:228 msgid "Serbian (cyrillic)" msgstr "" #: ../../keyboard.pm_.c:229 msgid "Thai keyboard" msgstr "" #: ../../keyboard.pm_.c:231 msgid "Tajik keyboard" msgstr "" #: ../../keyboard.pm_.c:232 msgid "Turkish (traditional \"F\" model)" msgstr "" #: ../../keyboard.pm_.c:233 msgid "Turkish (modern \"Q\" model)" msgstr "" #: ../../keyboard.pm_.c:234 msgid "Ukrainian" msgstr "" #: ../../keyboard.pm_.c:237 msgid "US keyboard (international)" msgstr "" #: ../../keyboard.pm_.c:238 msgid "Vietnamese \"numeric row\" QWERTY" msgstr "" #: ../../keyboard.pm_.c:239 msgid "Yugoslavian (latin)" msgstr "" #: ../../loopback.pm_.c:33 #, c-format msgid "Circular mounts %s\n" msgstr "" #: ../../lvm.pm_.c:70 msgid "Remove the logical volumes first\n" msgstr "" #: ../../mouse.pm_.c:26 msgid "Sun - Mouse" msgstr "" #: ../../mouse.pm_.c:32 msgid "Standard" msgstr "" #: ../../mouse.pm_.c:33 msgid "Logitech MouseMan+" msgstr "" #: ../../mouse.pm_.c:34 msgid "Generic PS2 Wheel Mouse" msgstr "" #: ../../mouse.pm_.c:35 msgid "GlidePoint" msgstr "" #: ../../mouse.pm_.c:37 ../../mouse.pm_.c:63 msgid "Kensington Thinking Mouse" msgstr "" #: ../../mouse.pm_.c:38 ../../mouse.pm_.c:59 msgid "Genius NetMouse" msgstr "" #: ../../mouse.pm_.c:39 msgid "Genius NetScroll" msgstr "" #: ../../mouse.pm_.c:44 ../../mouse.pm_.c:68 msgid "1 button" msgstr "" #: ../../mouse.pm_.c:45 msgid "Generic" msgstr "" #: ../../mouse.pm_.c:46 msgid "Wheel" msgstr "" #: ../../mouse.pm_.c:49 msgid "serial" msgstr "" #: ../../mouse.pm_.c:51 msgid "Generic 2 Button Mouse" msgstr "" #: ../../mouse.pm_.c:52 msgid "Generic 3 Button Mouse" msgstr "" #: ../../mouse.pm_.c:53 msgid "Microsoft IntelliMouse" msgstr "" #: ../../mouse.pm_.c:54 msgid "Logitech MouseMan" msgstr "" #: ../../mouse.pm_.c:55 msgid "Mouse Systems" msgstr "" #: ../../mouse.pm_.c:57 msgid "Logitech CC Series" msgstr "" #: ../../mouse.pm_.c:58 msgid "Logitech MouseMan+/FirstMouse+" msgstr "" #: ../../mouse.pm_.c:60 msgid "MM Series" msgstr "" #: ../../mouse.pm_.c:61 msgid "MM HitTablet" msgstr "" #: ../../mouse.pm_.c:62 msgid "Logitech Mouse (serial, old C7 type)" msgstr "" #: ../../mouse.pm_.c:66 msgid "busmouse" msgstr "" #: ../../mouse.pm_.c:69 msgid "2 buttons" msgstr "" #: ../../mouse.pm_.c:70 msgid "3 buttons" msgstr "" #: ../../mouse.pm_.c:73 msgid "none" msgstr "" #: ../../mouse.pm_.c:75 msgid "No mouse" msgstr "" #: ../../my_gtk.pm_.c:379 msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" msgstr "" #: ../../my_gtk.pm_.c:414 msgid "Finish" msgstr "" #: ../../my_gtk.pm_.c:414 msgid "Next ->" msgstr "" #: ../../my_gtk.pm_.c:415 msgid "<- Previous" msgstr "" #: ../../my_gtk.pm_.c:675 msgid "Is this correct?" msgstr "" #: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36 msgid "Connect to the Internet" msgstr "" #: ../../network/adsl.pm_.c:20 msgid "" "The most common way to connect with adsl is pppoe.\n" "Some connections use pptp, a few ones use dhcp.\n" "If you don't know, choose 'use pppoe'" msgstr "" #: ../../network/adsl.pm_.c:22 msgid "speedtouch usb" msgstr "" #: ../../network/adsl.pm_.c:22 msgid "use dhcp" msgstr "" #: ../../network/adsl.pm_.c:22 msgid "use pppoe" msgstr "" #: ../../network/adsl.pm_.c:22 msgid "use pptp" msgstr "" #: ../../network/adsl.pm_.c:31 ../../network/ethernet.pm_.c:109 #: ../../network/ethernet.pm_.c:175 ../../standalone/drakgw_.c:223 msgid "Network interface" msgstr "" #: ../../network/adsl.pm_.c:32 ../../network/ethernet.pm_.c:176 #, c-format msgid "I'm about to restart the network device %s. Do you agree?" msgstr "" #: ../../network/ethernet.pm_.c:37 msgid "" "Which dhcp client do you want to use?\n" "Default is dhcpcd" msgstr "" #: ../../network/ethernet.pm_.c:64 msgid "Network configuration" msgstr "" #: ../../network/ethernet.pm_.c:65 msgid "Do you want to restart the network" msgstr "" #: ../../network/ethernet.pm_.c:68 #, c-format msgid "" "A problem occured while restarting the network: \n" "\n" "%s" msgstr "" #: ../../network/ethernet.pm_.c:68 ../../network/netconnect.pm_.c:129 #: ../../network/netconnect.pm_.c:236 ../../network/tools.pm_.c:52 msgid "Network Configuration" msgstr "" #: ../../network/ethernet.pm_.c:95 msgid "" "No ethernet network adapter has been detected on your system.\n" "I cannot set up this connection type." msgstr "" #: ../../network/ethernet.pm_.c:99 ../../standalone/drakgw_.c:232 msgid "Choose the network interface" msgstr "" #: ../../network/ethernet.pm_.c:100 msgid "" "Please choose which network adapter you want to use to connect to Internet" msgstr "" #: ../../network/ethernet.pm_.c:110 msgid "" "\n" "Do you agree?" msgstr "" #: ../../network/ethernet.pm_.c:110 msgid "I'm about to restart the network device:\n" msgstr "" #: ../../network/ethernet.pm_.c:185 msgid "no network card found" msgstr "" #: ../../network/ethernet.pm_.c:209 ../../network/network.pm_.c:350 msgid "Configuring network" msgstr "" #: ../../network/ethernet.pm_.c:210 msgid "" "Please enter your host name if you know it.\n" "Some DHCP servers require the hostname to work.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''." msgstr "" #: ../../network/ethernet.pm_.c:214 ../../network/network.pm_.c:355 msgid "Host name" msgstr "" #: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44 #: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105 #: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164 #: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:206 #: ../../network/netconnect.pm_.c:214 msgid "Network Configuration Wizard" msgstr "" #: ../../network/isdn.pm_.c:22 msgid "External ISDN modem" msgstr "" #: ../../network/isdn.pm_.c:22 msgid "Internal ISDN card" msgstr "" #: ../../network/isdn.pm_.c:22 msgid "What kind is your ISDN connection?" msgstr "" #: ../../network/isdn.pm_.c:45 msgid "" "Which ISDN configuration do you prefer?\n" "\n" "* The Old configuration uses isdn4net. It contains powerfull\n" " tools, but is tricky to configure, and not standard.\n" "\n" "* The New configuration is easier to understand, more\n" " standard, but with less tools.\n" "\n" "We recommand the light configuration.\n" msgstr "" #: ../../network/isdn.pm_.c:54 msgid "New configuration (isdn-light)" msgstr "" #: ../../network/isdn.pm_.c:54 msgid "Old configuration (isdn4net)" msgstr "" #: ../../network/isdn.pm_.c:168 ../../network/isdn.pm_.c:186 #: ../../network/isdn.pm_.c:196 ../../network/isdn.pm_.c:203 #: ../../network/isdn.pm_.c:213 msgid "ISDN Configuration" msgstr "" #: ../../network/isdn.pm_.c:168 msgid "" "Select your provider.\n" " If it's not in the list, choose Unlisted" msgstr "" #: ../../network/isdn.pm_.c:181 msgid "Europe protocol" msgstr "" #: ../../network/isdn.pm_.c:181 msgid "Europe protocol (EDSS1)" msgstr "" #: ../../network/isdn.pm_.c:183 msgid "Protocol for the rest of the world" msgstr "" #: ../../network/isdn.pm_.c:183 msgid "" "Protocol for the rest of the world \n" " no D-Channel (leased lines)" msgstr "" #: ../../network/isdn.pm_.c:187 msgid "Which protocol do you want to use ?" msgstr "" #: ../../network/isdn.pm_.c:197 msgid "What kind of card do you have?" msgstr "" #: ../../network/isdn.pm_.c:198 msgid "I don't know" msgstr "" #: ../../network/isdn.pm_.c:198 msgid "ISA / PCMCIA" msgstr "" #: ../../network/isdn.pm_.c:198 msgid "PCI" msgstr "" #: ../../network/isdn.pm_.c:204 msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the irq and io of your card.\n" msgstr "" #: ../../network/isdn.pm_.c:208 msgid "Abort" msgstr "" #: ../../network/isdn.pm_.c:208 msgid "Continue" msgstr "" #: ../../network/isdn.pm_.c:214 msgid "Which is your ISDN card ?" msgstr "" #: ../../network/isdn.pm_.c:233 msgid "" "I have detected an ISDN PCI Card, but I don't know the type. Please select " "one PCI card on the next screen." msgstr "" #: ../../network/isdn.pm_.c:242 msgid "No ISDN PCI card found. Please select one on the next screen." msgstr "" #: ../../network/modem.pm_.c:37 msgid "Please choose which serial port your modem is connected to." msgstr "" #: ../../network/modem.pm_.c:42 msgid "Dialup options" msgstr "" #: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:592 msgid "Connection name" msgstr "" #: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:593 msgid "Phone number" msgstr "" #: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:594 msgid "Login ID" msgstr "" #: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:596 msgid "CHAP" msgstr "" #: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:596 msgid "PAP" msgstr "" #: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:596 msgid "Script-based" msgstr "" #: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:596 msgid "Terminal-based" msgstr "" #: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:597 msgid "Domain name" msgstr "" #: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:598 msgid "First DNS Server (optional)" msgstr "" #: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:599 msgid "Second DNS Server (optional)" msgstr "" #: ../../network/netconnect.pm_.c:34 msgid "" "\n" "You can disconnect or reconfigure your connection." msgstr "" #: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37 msgid "" "\n" "You can reconfigure your connection." msgstr "" #: ../../network/netconnect.pm_.c:34 msgid "You are currently connected to internet." msgstr "" #: ../../network/netconnect.pm_.c:37 msgid "" "\n" "You can connect to Internet or reconfigure your connection." msgstr "" #: ../../network/netconnect.pm_.c:37 msgid "You are not currently connected to Internet." msgstr "" #: ../../network/netconnect.pm_.c:41 msgid "Connect to Internet" msgstr "" #: ../../network/netconnect.pm_.c:43 msgid "Disconnect from Internet" msgstr "" #: ../../network/netconnect.pm_.c:45 msgid "Configure network connection (LAN or Internet)" msgstr "" #: ../../network/netconnect.pm_.c:48 msgid "Internet connection & configuration" msgstr "" #: ../../network/netconnect.pm_.c:96 #, c-format msgid "We are now going to configure the %s connection." msgstr "" #: ../../network/netconnect.pm_.c:105 #, c-format msgid "" "\n" "\n" "\n" "We are now going to configure the %s connection.\n" "\n" "\n" "Press OK to continue." msgstr "" #: ../../network/netconnect.pm_.c:130 msgid "" "Because you are doing a network installation, your network is already " "configured.\n" "Click on Ok to keep your configuration, or cancel to reconfigure your " "Internet & Network connection.\n" msgstr "" #: ../../network/netconnect.pm_.c:155 msgid "" "Welcome to The Network Configuration Wizard\n" "\n" "We are about to configure your internet/network connection.\n" "If you don't want to use the auto detection, deselect the checkbox.\n" msgstr "" #: ../../network/netconnect.pm_.c:157 msgid "Choose the profile to configure" msgstr "" #: ../../network/netconnect.pm_.c:158 msgid "Use auto detection" msgstr "" #: ../../network/netconnect.pm_.c:164 ../../printerdrake.pm_.c:188 msgid "Detecting devices..." msgstr "" #: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184 msgid "Normal modem connection" msgstr "" #: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184 #, c-format msgid "detected on port %s" msgstr "" #: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185 msgid "ISDN connection" msgstr "" #: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185 #, c-format msgid "detected %s" msgstr "" #: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186 msgid "ADSL connection" msgstr "" #: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186 #, c-format msgid "detected on interface %s" msgstr "" #: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187 msgid "Cable connection" msgstr "" #: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187 msgid "cable connection detected" msgstr "" #: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188 msgid "LAN connection" msgstr "" #: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188 msgid "ethernet card(s) detected" msgstr "" #: ../../network/netconnect.pm_.c:190 msgid "Choose the connection you want to configure" msgstr "" #: ../../network/netconnect.pm_.c:207 msgid "" "You have configured multiple ways to connect to the Internet.\n" "Choose the one you want to use.\n" "\n" msgstr "" #: ../../network/netconnect.pm_.c:208 msgid "Internet connection" msgstr "" #: ../../network/netconnect.pm_.c:214 msgid "Do you want to start the connection at boot?" msgstr "" #: ../../network/netconnect.pm_.c:228 msgid "" "Congratulations, the network and internet configuration is finished.\n" "\n" "The configuration will now be applied to your system.\n" msgstr "" #: ../../network/netconnect.pm_.c:231 msgid "" "After that is done, we recommend you to restart your X\n" "environnement to avoid hostname changing problem." msgstr "" #: ../../network/network.pm_.c:283 msgid "" "WARNING: This device has been previously configured to connect to the " "Internet.\n" "Simply accept to keep this device configured.\n" "Modifying the fields below will override this configuration." msgstr "" #: ../../network/network.pm_.c:288 msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" #: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298 #, c-format msgid "Configuring network device %s" msgstr "" #: ../../network/network.pm_.c:298 #, c-format msgid " (driver %s)" msgstr "" #: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:250 #: ../../standalone/draknet_.c:453 msgid "IP address" msgstr "" #: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:454 msgid "Netmask" msgstr "" #: ../../network/network.pm_.c:302 msgid "(bootp/dhcp)" msgstr "" #: ../../network/network.pm_.c:302 msgid "Automatic IP" msgstr "" #: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:362 msgid "IP address should be in format 1.2.3.4" msgstr "" #: ../../network/network.pm_.c:351 msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one" msgstr "" #: ../../network/network.pm_.c:356 msgid "DNS server" msgstr "" #: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:591 msgid "Gateway" msgstr "" #: ../../network/network.pm_.c:359 msgid "Gateway device" msgstr "" #: ../../network/network.pm_.c:371 msgid "Proxies configuration" msgstr "" #: ../../network/network.pm_.c:372 msgid "HTTP proxy" msgstr "" #: ../../network/network.pm_.c:373 msgid "FTP proxy" msgstr "" #: ../../network/network.pm_.c:374 msgid "Track network card id (usefull for laptops)" msgstr "" #: ../../network/network.pm_.c:377 msgid "Proxy should be http://..." msgstr "" #: ../../network/network.pm_.c:378 msgid "Proxy should be ftp://..." msgstr "" #: ../../network/tools.pm_.c:34 msgid "Internet configuration" msgstr "" #: ../../network/tools.pm_.c:35 msgid "Do you want to try to connect to the Internet now?" msgstr "" #: ../../network/tools.pm_.c:39 msgid "Testing your connection..." msgstr "" #: ../../network/tools.pm_.c:45 ../../standalone/draknet_.c:215 msgid "The system is now connected to Internet." msgstr "" #: ../../network/tools.pm_.c:46 msgid "For Security reason, it will be disconnected now." msgstr "" #: ../../network/tools.pm_.c:47 ../../standalone/draknet_.c:215 msgid "" "The system doesn't seem to be connected to internet.\n" "Try to reconfigure your connection." msgstr "" #: ../../network/tools.pm_.c:71 msgid "Connection Configuration" msgstr "" #: ../../network/tools.pm_.c:72 msgid "Please fill or check the field below" msgstr "" #: ../../network/tools.pm_.c:74 ../../standalone/draknet_.c:578 msgid "Card IRQ" msgstr "" #: ../../network/tools.pm_.c:75 ../../standalone/draknet_.c:579 msgid "Card mem (DMA)" msgstr "" #: ../../network/tools.pm_.c:76 ../../standalone/draknet_.c:580 msgid "Card IO" msgstr "" #: ../../network/tools.pm_.c:77 ../../standalone/draknet_.c:581 msgid "Card IO_0" msgstr "" #: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:582 msgid "Card IO_1" msgstr "" #: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:583 msgid "Your personal phone number" msgstr "" #: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:584 msgid "Provider name (ex provider.net)" msgstr "" #: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:585 msgid "Provider phone number" msgstr "" #: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:586 msgid "Provider dns 1 (optional)" msgstr "" #: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:587 msgid "Provider dns 2 (optional)" msgstr "" #: ../../network/tools.pm_.c:84 msgid "Choose your country" msgstr "" #: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:590 msgid "Dialing mode" msgstr "" #: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:602 msgid "Connection speed" msgstr "" #: ../../network/tools.pm_.c:87 msgid "Connection timeout (in sec)" msgstr "" #: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:588 msgid "Account Login (user name)" msgstr "" #: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:589 msgid "Account Password" msgstr "" #: ../../partition_table.pm_.c:611 msgid "Extended partition not supported on this platform" msgstr "" #: ../../partition_table.pm_.c:629 msgid "" "You have a hole in your partition table but I can't use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions" msgstr "" #: ../../partition_table.pm_.c:730 #, c-format msgid "Restoring from file %s failed: %s" msgstr "" #: ../../partition_table.pm_.c:732 msgid "Bad backup file" msgstr "" #: ../../partition_table.pm_.c:754 #, c-format msgid "Error writing to file %s" msgstr "" #: ../../partition_table_raw.pm_.c:152 msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random trash" msgstr "" #: ../../pkgs.pm_.c:25 msgid "must have" msgstr "" #: ../../pkgs.pm_.c:26 msgid "important" msgstr "" #: ../../pkgs.pm_.c:27 msgid "very nice" msgstr "" #: ../../pkgs.pm_.c:28 msgid "nice" msgstr "" #: ../../pkgs.pm_.c:29 msgid "maybe" msgstr "" #: ../../printer.pm_.c:23 msgid "CUPS - Common Unix Printing System" msgstr "" #: ../../printer.pm_.c:24 msgid "LPRng - LPR New Generation" msgstr "" #: ../../printer.pm_.c:25 msgid "LPD - Line Printer Daemon" msgstr "" #: ../../printer.pm_.c:26 msgid "PDQ - Print, Don't Queue" msgstr "" #: ../../printer.pm_.c:32 msgid "CUPS" msgstr "" #: ../../printer.pm_.c:33 msgid "LPRng" msgstr "" #: ../../printer.pm_.c:34 msgid "LPD" msgstr "" #: ../../printer.pm_.c:35 msgid "PDQ" msgstr "" #: ../../printer.pm_.c:40 msgid "Local printer" msgstr "" #: ../../printer.pm_.c:41 msgid "Remote printer" msgstr "" #: ../../printer.pm_.c:42 msgid "Printer on remote CUPS server" msgstr "" #: ../../printer.pm_.c:43 msgid "Printer on remote lpd server" msgstr "" #: ../../printer.pm_.c:44 msgid "Network printer (socket)" msgstr "" #: ../../printer.pm_.c:45 msgid "Printer on SMB/Windows 95/98/NT server" msgstr "" #: ../../printer.pm_.c:46 msgid "Printer on NetWare server" msgstr "" #: ../../printer.pm_.c:47 msgid "Enter a printer device URI" msgstr "" #: ../../printer.pm_.c:48 msgid "Pipe job into a command" msgstr "" #: ../../printer.pm_.c:210 ../../printer.pm_.c:608 #: ../../printerdrake.pm_.c:1412 msgid "Unknown model" msgstr "" #: ../../printer.pm_.c:462 #, c-format msgid "(on %s)" msgstr "" #: ../../printer.pm_.c:464 msgid "(on this machine)" msgstr "" #: ../../printerdrake.pm_.c:23 msgid "Select Printer Connection" msgstr "" #: ../../printerdrake.pm_.c:24 msgid "How is the printer connected?" msgstr "" #: ../../printerdrake.pm_.c:26 msgid "" "\n" "Printers on remote CUPS servers you do not have to configure\n" "here; these printers will be automatically detected. Please\n" "select \"Printer on remote CUPS server\" in this case." msgstr "" #: ../../printerdrake.pm_.c:82 msgid "" "With remote CUPS servers, you do not have to configure any \n" "printer here; CUPS servers inform your machine automatically\n" "about their printers. All printers known to your machine\n" "currently are listed in the \"Default printer\" field. Choose\n" "the default printer for your machine there and click the\n" "\"Apply/Re-read printers\" button. Click the same button to\n" "refresh the list (it can take up to 30 seconds after the start\n" "of CUPS until all remote printers are visible).\n" "When your CUPS server is in a different network, you have to \n" "give the CUPS server IP address and optionally the port number\n" "to get the printer information from the server, otherwise leave\n" "these fields blank." msgstr "" #: ../../printerdrake.pm_.c:94 msgid "" "\n" "Normally, CUPS is automatically configured according to your\n" "network environment, so that you can access the printers on the\n" "CUPS servers in your local network. If this does not correctly,\n" "turn off \"Automatic CUPS configuration\" and edit your file\n" "/etc/cups/cupsd.conf manually. Do not forget to restart CUPS\n" "afterwards (command: \"service cups restart\")." msgstr "" #: ../../printerdrake.pm_.c:101 ../../printerdrake.pm_.c:1400 msgid "Close" msgstr "" #: ../../printerdrake.pm_.c:102 msgid "Apply/Re-read printers" msgstr "" #: ../../printerdrake.pm_.c:106 msgid "The IP address should look like 192.168.1.20" msgstr "" #: ../../printerdrake.pm_.c:111 ../../printerdrake.pm_.c:486 msgid "The port number should be an integer!" msgstr "" #: ../../printerdrake.pm_.c:118 ../../printerdrake.pm_.c:1522 #: ../../printerdrake.pm_.c:1525 msgid "Default printer" msgstr "" #: ../../printerdrake.pm_.c:123 msgid "CUPS server IP" msgstr "" #: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:479 msgid "Port" msgstr "" #: ../../printerdrake.pm_.c:126 msgid "Automatic CUPS configuration" msgstr "" #: ../../printerdrake.pm_.c:188 msgid "Test ports" msgstr "" #: ../../printerdrake.pm_.c:209 #, c-format msgid "A printer, model \"%s\", has been detected on " msgstr "" #: ../../printerdrake.pm_.c:226 msgid "Local Printer Device" msgstr "" #: ../../printerdrake.pm_.c:227 msgid "" "What device is your printer connected to \n" "(note that /dev/lp0 is equivalent to LPT1:)?\n" msgstr "" #: ../../printerdrake.pm_.c:229 msgid "Printer Device" msgstr "" #: ../../printerdrake.pm_.c:232 msgid "Device/file name missing!" msgstr "" #: ../../printerdrake.pm_.c:273 msgid "Remote lpd Printer Options" msgstr "" #: ../../printerdrake.pm_.c:274 msgid "" "To use a remote lpd printer, you need to supply\n" "the hostname of the printer server and the printer name\n" "on that server." msgstr "" #: ../../printerdrake.pm_.c:277 msgid "Remote host name" msgstr "" #: ../../printerdrake.pm_.c:278 msgid "Remote printer name" msgstr "" #: ../../printerdrake.pm_.c:281 msgid "Remote host name missing!" msgstr "" #: ../../printerdrake.pm_.c:285 msgid "Remote printer name missing!" msgstr "" #: ../../printerdrake.pm_.c:348 msgid "SMB (Windows 9x/NT) Printer Options" msgstr "" #: ../../printerdrake.pm_.c:349 msgid "" "To print to a SMB printer, you need to provide the\n" "SMB host name (Note! It may be different from its\n" "TCP/IP hostname!) and possibly the IP address of the print server, as\n" "well as the share name for the printer you wish to access and any\n" "applicable user name, password, and workgroup information." msgstr "" #: ../../printerdrake.pm_.c:354 msgid "SMB server host" msgstr "" #: ../../printerdrake.pm_.c:355 msgid "SMB server IP" msgstr "" #: ../../printerdrake.pm_.c:356 msgid "Share name" msgstr "" #: ../../printerdrake.pm_.c:359 msgid "Workgroup" msgstr "" #: ../../printerdrake.pm_.c:366 msgid "Either the server name or the server's IP must be given!" msgstr "" #: ../../printerdrake.pm_.c:370 msgid "Samba share name missing!" msgstr "" #: ../../printerdrake.pm_.c:424 msgid "NetWare Printer Options" msgstr "" #: ../../printerdrake.pm_.c:425 msgid "" "To print on a NetWare printer, you need to provide the\n" "NetWare print server name (Note! it may be different from its\n" "TCP/IP hostname!) as well as the print queue name for the printer you\n" "wish to access and any applicable user name and password." msgstr "" #: ../../printerdrake.pm_.c:429 msgid "Printer Server" msgstr "" #: ../../printerdrake.pm_.c:430 msgid "Print Queue Name" msgstr "" #: ../../printerdrake.pm_.c:435 msgid "NCP server name missing!" msgstr "" #: ../../printerdrake.pm_.c:439 msgid "NCP queue name missing!" msgstr "" #: ../../printerdrake.pm_.c:472 msgid "Socket Printer Options" msgstr "" #: ../../printerdrake.pm_.c:473 msgid "" "To print to a socket printer, you need to provide the\n" "host name of the printer and optionally the port number.\n" "On HP JetDirect servers the port number is usually 9100,\n" "on other servers it can vary. See the manual of your\n" "hardware." msgstr "" #: ../../printerdrake.pm_.c:478 msgid "Printer host name" msgstr "" #: ../../printerdrake.pm_.c:482 msgid "Printer host name missing!" msgstr "" #: ../../printerdrake.pm_.c:510 ../../printerdrake.pm_.c:512 msgid "Printer Device URI" msgstr "" #: ../../printerdrake.pm_.c:511 msgid "" "You can specify directly the URI to access the printer. The URI must fulfill " "either the CUPS or the Foomatic specifications. Note that not all URI types " "are supported by all the spoolers." msgstr "" #: ../../printerdrake.pm_.c:526 msgid "A valid URI must be entered!" msgstr "" #: ../../printerdrake.pm_.c:621 msgid "" "Every printer needs a name (for example lp).\n" "The Description and Location fields do not need \n" "to be filled in. They are comments for the users." msgstr "" #: ../../printerdrake.pm_.c:624 msgid "Name of printer" msgstr "" #: ../../printerdrake.pm_.c:625 msgid "Description" msgstr "" #: ../../printerdrake.pm_.c:626 msgid "Location" msgstr "" #: ../../printerdrake.pm_.c:722 msgid "Printer model selection" msgstr "" #: ../../printerdrake.pm_.c:723 msgid "Which printer model do you have?" msgstr "" #: ../../printerdrake.pm_.c:844 msgid "" "Printer default settings\n" "You should make sure that the page size and the\n" "ink type (if available) are set correctly. Note\n" "that with a very high printout quality printing\n" "can get substantially slower." msgstr "" #: ../../printerdrake.pm_.c:855 #, c-format msgid "Option %s must be an integer number!" msgstr "" #: ../../printerdrake.pm_.c:859 #, c-format msgid "Option %s must be a number!" msgstr "" #: ../../printerdrake.pm_.c:864 #, c-format msgid "Option %s out of range!" msgstr "" #: ../../printerdrake.pm_.c:900 #, c-format msgid "" "Do you want to set this printer (\"%s\")\n" "as the default printer?" msgstr "" #: ../../printerdrake.pm_.c:915 msgid "Test pages" msgstr "" #: ../../printerdrake.pm_.c:916 msgid "" "Please select the test pages you want to print.\n" "Note: the photo test page can take a rather long time to get printed\n" "and on laser printers with too low memory it can even not come out.\n" "In most cases it is enough to print the standard test page." msgstr "" #: ../../printerdrake.pm_.c:921 msgid "No test pages" msgstr "" #: ../../printerdrake.pm_.c:922 msgid "Print" msgstr "" #: ../../printerdrake.pm_.c:924 msgid "Standard test page" msgstr "" #: ../../printerdrake.pm_.c:927 msgid "Alternative test page (Letter)" msgstr "" #: ../../printerdrake.pm_.c:930 msgid "Alternative test page (A4)" msgstr "" #: ../../printerdrake.pm_.c:932 msgid "Photo test page" msgstr "" #: ../../printerdrake.pm_.c:939 msgid "Printing test page(s)..." msgstr "" #: ../../printerdrake.pm_.c:964 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" "Printing status:\n" "%s\n" "\n" msgstr "" #: ../../printerdrake.pm_.c:968 msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" msgstr "" #: ../../printerdrake.pm_.c:975 msgid "Did it work properly?" msgstr "" #: ../../printerdrake.pm_.c:994 msgid "Reading printer data ..." msgstr "" #: ../../printerdrake.pm_.c:1014 ../../printerdrake.pm_.c:1052 #: ../../printerdrake.pm_.c:1087 msgid "Transfer printer configuration" msgstr "" #: ../../printerdrake.pm_.c:1015 #, c-format msgid "" "You can copy the printer configuration which you have done \n" "for the spooler %s to %s, your current spooler. All the\n" "configuration data (printer name, description, location, \n" "connection type, and default option settings) is overtaken,\n" "but jobs will not be transferred.\n" "Not all queues can be transferred due to the following \n" "reasons:\n" msgstr "" #: ../../printerdrake.pm_.c:1023 msgid "" "CUPS does not support printers on Novell servers or printers\n" "sending the data into a free-formed command.\n" msgstr "" #: ../../printerdrake.pm_.c:1026 msgid "" "PDQ only supports local printers, remote LPD printers, and\n" "Socket/TCP printers.\n" msgstr "" #: ../../printerdrake.pm_.c:1029 msgid "LPD and LPRng do not support IPP printers.\n" msgstr "" #: ../../printerdrake.pm_.c:1031 msgid "" "In addition, queues not created with this program or\n" "\"foomatic-configure\" cannot be transferred." msgstr "" #: ../../printerdrake.pm_.c:1033 msgid "" "\n" "Also printers configured with the PPD files provided by\n" "their manufacturers or with native CUPS drivers can not be\n" "transferred." msgstr "" #: ../../printerdrake.pm_.c:1036 msgid "" "\n" "Mark the printers which you want to transfer and click \n" "\"Transfer\"." msgstr "" #: ../../printerdrake.pm_.c:1039 msgid "Do not transfer printers" msgstr "" #: ../../printerdrake.pm_.c:1040 ../../printerdrake.pm_.c:1057 msgid "Transfer" msgstr "" #: ../../printerdrake.pm_.c:1053 #, c-format msgid "" "A printer named \"%s\" already exists under %s. \n" "Click \"Transfer\" to overwrite it.\n" "You can also type a new name or skip this printer." msgstr "" #: ../../printerdrake.pm_.c:1061 msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "" #: ../../printerdrake.pm_.c:1066 #, c-format msgid "" "The printer \"%s\" already exists,\n" "do you really want to overwrite its configuration?" msgstr "" #: ../../printerdrake.pm_.c:1074 msgid "New printer name" msgstr "" #: ../../printerdrake.pm_.c:1077 #, c-format msgid "Transferring %s ..." msgstr "" #: ../../printerdrake.pm_.c:1088 #, c-format msgid "" "You have transferred your former default printer (\"%s\"),\n" "Should it be also the default printer under the\n" "new printing system %s?" msgstr "" #: ../../printerdrake.pm_.c:1108 msgid "Select Printer Spooler" msgstr "" #: ../../printerdrake.pm_.c:1109 msgid "Which printing system (spooler) do you want to use?" msgstr "" #: ../../printerdrake.pm_.c:1157 msgid "Removing LPRng..." msgstr "" #: ../../printerdrake.pm_.c:1172 msgid "Removing LPD..." msgstr "" #: ../../printerdrake.pm_.c:1206 msgid "Checking installed software..." msgstr "" #: ../../printerdrake.pm_.c:1232 ../../printerdrake.pm_.c:1251 #: ../../printerdrake.pm_.c:1413 ../../printerdrake.pm_.c:1482 msgid "Printer options" msgstr "" #: ../../printerdrake.pm_.c:1257 msgid "Would you like to configure printing?" msgstr "" #: ../../printerdrake.pm_.c:1269 msgid "Printing system: " msgstr "" #: ../../printerdrake.pm_.c:1281 msgid "" "The following printers are configured.\n" "You can add some more or modify the existing ones." msgstr "" #: ../../printerdrake.pm_.c:1290 ../../printerdrake.pm_.c:1399 msgid " (Default)" msgstr "" #: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1332 msgid "Printer(s) on remote CUPS server(s)" msgstr "" #: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:1316 #: ../../printerdrake.pm_.c:1319 ../../printerdrake.pm_.c:1363 msgid "Add printer" msgstr "" #: ../../printerdrake.pm_.c:1392 msgid "Modify printer configuration" msgstr "" #: ../../printerdrake.pm_.c:1393 #, c-format msgid "" "Printer %s: %s %s\n" "What do you want to modify on this printer?" msgstr "" #: ../../printerdrake.pm_.c:1401 msgid "Do it!" msgstr "" #: ../../printerdrake.pm_.c:1404 ../../printerdrake.pm_.c:1447 msgid "Printer connection type" msgstr "" #: ../../printerdrake.pm_.c:1405 ../../printerdrake.pm_.c:1454 msgid "Printer name, description, location" msgstr "" #: ../../printerdrake.pm_.c:1407 ../../printerdrake.pm_.c:1472 msgid "Printer manufacturer, model, driver" msgstr "" #: ../../printerdrake.pm_.c:1408 ../../printerdrake.pm_.c:1473 msgid "Printer manufacturer, model" msgstr "" #: ../../printerdrake.pm_.c:1415 ../../printerdrake.pm_.c:1520 msgid "Set this printer as the default" msgstr "" #: ../../printerdrake.pm_.c:1416 ../../printerdrake.pm_.c:1528 msgid "Print test pages" msgstr "" #: ../../printerdrake.pm_.c:1417 ../../printerdrake.pm_.c:1530 msgid "Remove printer" msgstr "" #: ../../printerdrake.pm_.c:1523 #, c-format msgid "The printer \"%s\" is set as the default printer now." msgstr "" #: ../../printerdrake.pm_.c:1526 #, c-format msgid "Could not set \"%s\" as the default printer!" msgstr "" #: ../../printerdrake.pm_.c:1532 #, c-format msgid "Do you really want to remove the printer \"%s\"?" msgstr "" #: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58 #: ../../proxy.pm_.c:78 msgid "Proxy configuration" msgstr "" #: ../../proxy.pm_.c:30 msgid "" "Welcome to the proxy configuration utility.\n" "\n" "Here, you'll be able to set up your http and ftp proxies\n" "with or without login and password\n" msgstr "" #: ../../proxy.pm_.c:38 msgid "" "Please fill in the http proxy informations\n" "Leave it blank if you don't want an http proxy" msgstr "" #: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60 msgid "URL" msgstr "" #: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61 msgid "port" msgstr "" #: ../../proxy.pm_.c:44 msgid "Url should begin with 'http:'" msgstr "" #: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69 msgid "The port part should be numeric" msgstr "" #: ../../proxy.pm_.c:59 msgid "" "Please fill in the ftp proxy informations\n" "Leave it blank if you don't want an ftp proxy" msgstr "" #: ../../proxy.pm_.c:65 msgid "Url should begin with 'ftp:'" msgstr "" #: ../../proxy.pm_.c:79 msgid "" "Please enter proxy login and password, if any.\n" "Leave it blank if you don't want login/passwd" msgstr "" #: ../../proxy.pm_.c:80 msgid "login" msgstr "" #: ../../proxy.pm_.c:82 msgid "password" msgstr "" #: ../../proxy.pm_.c:84 msgid "re-type password" msgstr "" #: ../../proxy.pm_.c:88 msgid "The passwords don't match. Try again!" msgstr "" #: ../../raid.pm_.c:36 #, c-format msgid "Can't add a partition to _formatted_ RAID md%d" msgstr "" #: ../../raid.pm_.c:112 #, c-format msgid "Can't write file %s" msgstr "" #: ../../raid.pm_.c:137 msgid "mkraid failed" msgstr "" #: ../../raid.pm_.c:137 msgid "mkraid failed (maybe raidtools are missing?)" msgstr "" #: ../../raid.pm_.c:153 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "" #: ../../services.pm_.c:16 msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "" #: ../../services.pm_.c:17 msgid "Anacron a periodic command scheduler." msgstr "" #: ../../services.pm_.c:18 msgid "" "apmd is used for monitoring batery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" #: ../../services.pm_.c:20 msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" #: ../../services.pm_.c:22 msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" #: ../../services.pm_.c:25 msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" #: ../../services.pm_.c:28 msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "" #: ../../services.pm_.c:30 msgid "" "Apache is a World Wide Web server. It is used to serve HTML files\n" "and CGI." msgstr "" #: ../../services.pm_.c:32 msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" #: ../../services.pm_.c:36 msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" #: ../../services.pm_.c:38 msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" #: ../../services.pm_.c:41 msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" #: ../../services.pm_.c:43 msgid "Automatic detection and configuration of hardware at boot." msgstr "" #: ../../services.pm_.c:44 msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "" #: ../../services.pm_.c:46 msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" #: ../../services.pm_.c:48 msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "" #: ../../services.pm_.c:50 msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve\n" "host names to IP addresses." msgstr "" #: ../../services.pm_.c:52 msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" #: ../../services.pm_.c:54 msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" #: ../../services.pm_.c:56 msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" #: ../../services.pm_.c:59 msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" #: ../../services.pm_.c:61 msgid "" "Automatically switch on numlock key locker under console\n" "and XFree at boot." msgstr "" #: ../../services.pm_.c:63 msgid "Support the OKI 4w and compatible winprinters." msgstr "" #: ../../services.pm_.c:64 msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It won't get started unless configured so it is safe to " "have\n" "it installed on machines that don't need it." msgstr "" #: ../../services.pm_.c:67 msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" #: ../../services.pm_.c:70 msgid "" "Postfix is a Mail Transport Agent, which is the program that\n" "moves mail from one machine to another." msgstr "" #: ../../services.pm_.c:72 msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" #: ../../services.pm_.c:74 msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle" msgstr "" #: ../../services.pm_.c:76 msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" #: ../../services.pm_.c:79 msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" #: ../../services.pm_.c:81 msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" #: ../../services.pm_.c:83 msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similiar to finger)." msgstr "" #: ../../services.pm_.c:85 msgid "Launch the sound system on your machine" msgstr "" #: ../../services.pm_.c:86 msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" #: ../../services.pm_.c:88 msgid "Load the drivers for your usb devices." msgstr "" #: ../../services.pm_.c:89 msgid "Starts the X Font Server (this is mandatory for XFree to run)." msgstr "" #: ../../standalone/diskdrake_.c:63 msgid "" "I can't read your partition table, it's too corrupted for me :(\n" "I'll try to go on blanking bad partitions" msgstr "" #: ../../standalone/drakautoinst_.c:43 msgid "Auto Install Configurator" msgstr "" #: ../../standalone/drakautoinst_.c:44 msgid "" "You are about to configure an Auto Install floppy. This feature is somewhat " "dangerous and must be used circumspectly.\n" "\n" "With that feature, you will be able to replay the installation you've " "performed on this computer, being interactively prompted for some steps, in " "order to change their values.\n" "\n" "For maximum safety, the partitioning and formatting will never be performed " "automatically, whatever you chose during the install of this computer.\n" "\n" "Do you want to continue?" msgstr "" #: ../../standalone/drakautoinst_.c:66 msgid "Automatic Steps Configuration" msgstr "" #: ../../standalone/drakautoinst_.c:67 msgid "" "Please choose for each step whether it will replay like your install, or it " "will be manual" msgstr "" #: ../../standalone/drakautoinst_.c:75 msgid "Error!" msgstr "" #: ../../standalone/drakautoinst_.c:76 #, c-format msgid "I can't find needed image file `%s'." msgstr "" #: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:598 msgid "Congratulations!" msgstr "" #: ../../standalone/drakautoinst_.c:113 msgid "" "The floppy has been successfully generated.\n" "You may now replay your installation." msgstr "" #: ../../standalone/drakgw_.c:37 ../../standalone/drakgw_.c:180 msgid "Internet Connection Sharing" msgstr "" #: ../../standalone/drakgw_.c:118 msgid "Internet Connection Sharing currently enabled" msgstr "" #: ../../standalone/drakgw_.c:119 msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" #: ../../standalone/drakgw_.c:123 msgid "disable" msgstr "" #: ../../standalone/drakgw_.c:123 ../../standalone/drakgw_.c:148 msgid "dismiss" msgstr "" #: ../../standalone/drakgw_.c:123 ../../standalone/drakgw_.c:148 msgid "reconfigure" msgstr "" #: ../../standalone/drakgw_.c:126 msgid "Disabling servers..." msgstr "" #: ../../standalone/drakgw_.c:134 msgid "Internet connection sharing is now disabled." msgstr "" #: ../../standalone/drakgw_.c:143 msgid "Internet Connection Sharing currently disabled" msgstr "" #: ../../standalone/drakgw_.c:144 msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" #: ../../standalone/drakgw_.c:148 msgid "enable" msgstr "" #: ../../standalone/drakgw_.c:155 msgid "Enabling servers..." msgstr "" #: ../../standalone/drakgw_.c:160 msgid "Internet connection sharing is now enabled." msgstr "" #: ../../standalone/drakgw_.c:181 msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use " "this computer's Internet connection.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" #: ../../standalone/drakgw_.c:207 #, c-format msgid "Interface %s (using module %s)" msgstr "" #: ../../standalone/drakgw_.c:208 #, c-format msgid "Interface %s" msgstr "" #: ../../standalone/drakgw_.c:216 msgid "No network adapter on your system!" msgstr "" #: ../../standalone/drakgw_.c:217 msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "" #: ../../standalone/drakgw_.c:224 #, c-format msgid "" "There is only one configured network adapter on your system:\n" "\n" "%s\n" "\n" "I am about to setup your Local Area Network with that adapter." msgstr "" #: ../../standalone/drakgw_.c:233 msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." msgstr "" #: ../../standalone/drakgw_.c:242 msgid "" "Warning, the network adapter is already configured. I will reconfigure it." msgstr "" #: ../../standalone/drakgw_.c:253 #, c-format msgid "Potential LAN address conflict found in current config of %s!\n" msgstr "" #: ../../standalone/drakgw_.c:261 ../../standalone/drakgw_.c:267 msgid "Firewalling configuration detected!" msgstr "" #: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268 msgid "" "Warning! An existing firewalling configuration has been detected. You may " "need some manual fix after installation." msgstr "" #: ../../standalone/drakgw_.c:276 msgid "Configuring..." msgstr "" #: ../../standalone/drakgw_.c:277 msgid "Configuring scripts, installing software, starting servers..." msgstr "" #: ../../standalone/drakgw_.c:310 #, c-format msgid "Problems installing package %s" msgstr "" #: ../../standalone/drakgw_.c:599 msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local " "Area Network, using automatic network configuration (DHCP)." msgstr "" #: ../../standalone/drakgw_.c:616 msgid "The setup has already been done, but it's currently disabled." msgstr "" #: ../../standalone/drakgw_.c:617 msgid "The setup has already been done, and it's currently enabled." msgstr "" #: ../../standalone/drakgw_.c:618 msgid "No Internet Connection Sharing has ever been configured." msgstr "" #: ../../standalone/drakgw_.c:623 msgid "Internet connection sharing configuration" msgstr "" #: ../../standalone/drakgw_.c:630 #, c-format msgid "" "Welcome to the Internet Connection Sharing utility!\n" "\n" "%s\n" "\n" "Click on Configure to launch the setup wizard." msgstr "" #: ../../standalone/draknet_.c:78 #, c-format msgid "Network configuration (%d adapters)" msgstr "" #: ../../standalone/draknet_.c:85 ../../standalone/draknet_.c:565 msgid "Profile: " msgstr "" #: ../../standalone/draknet_.c:93 msgid "Del profile..." msgstr "" #: ../../standalone/draknet_.c:99 msgid "Profile to delete:" msgstr "" #: ../../standalone/draknet_.c:127 msgid "New profile..." msgstr "" #: ../../standalone/draknet_.c:133 msgid "" "Name of the profile to create (the new profile is created as a copy of the " "current one) :" msgstr "" #: ../../standalone/draknet_.c:159 msgid "Hostname: " msgstr "" #: ../../standalone/draknet_.c:166 msgid "Internet access" msgstr "" #: ../../standalone/draknet_.c:179 msgid "Type:" msgstr "" #: ../../standalone/draknet_.c:182 ../../standalone/draknet_.c:392 msgid "Gateway:" msgstr "" #: ../../standalone/draknet_.c:182 ../../standalone/draknet_.c:392 msgid "Interface:" msgstr "" #: ../../standalone/draknet_.c:187 msgid "Status:" msgstr "" #: ../../standalone/draknet_.c:189 ../../standalone/draknet_.c:395 msgid "Connected" msgstr "" #: ../../standalone/draknet_.c:189 ../../standalone/draknet_.c:395 msgid "Not connected" msgstr "" #: ../../standalone/draknet_.c:192 ../../standalone/draknet_.c:396 msgid "Connect..." msgstr "" #: ../../standalone/draknet_.c:192 ../../standalone/draknet_.c:396 msgid "Disconnect..." msgstr "" #: ../../standalone/draknet_.c:210 msgid "Starting your connection..." msgstr "" #: ../../standalone/draknet_.c:218 msgid "Closing your connection..." msgstr "" #: ../../standalone/draknet_.c:223 msgid "" "The connection is not closed.\n" "Try to do it manually by running\n" "/etc/sysconfig/network-scripts/net_cnx_down\n" "in root." msgstr "" #: ../../standalone/draknet_.c:226 msgid "The system is now disconnected." msgstr "" #: ../../standalone/draknet_.c:238 msgid "Configure Internet Access..." msgstr "" #: ../../standalone/draknet_.c:245 ../../standalone/draknet_.c:438 msgid "LAN configuration" msgstr "" #: ../../standalone/draknet_.c:250 msgid "Driver" msgstr "" #: ../../standalone/draknet_.c:250 msgid "Interface" msgstr "" #: ../../standalone/draknet_.c:250 msgid "Protocol" msgstr "" #: ../../standalone/draknet_.c:250 msgid "State" msgstr "" #: ../../standalone/draknet_.c:262 msgid "Configure Local Area Network..." msgstr "" #: ../../standalone/draknet_.c:296 msgid "Normal Mode" msgstr "" #: ../../standalone/draknet_.c:301 msgid "Apply" msgstr "" #: ../../standalone/draknet_.c:320 msgid "Please Wait... Applying the configuration" msgstr "" #: ../../standalone/draknet_.c:420 msgid "" "You don't have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" #: ../../standalone/draknet_.c:442 msgid "LAN Configuration" msgstr "" #: ../../standalone/draknet_.c:449 #, c-format msgid "Adapter %s: %s" msgstr "" #: ../../standalone/draknet_.c:455 msgid "Boot Protocol" msgstr "" #: ../../standalone/draknet_.c:456 msgid "Started on boot" msgstr "" #: ../../standalone/draknet_.c:457 msgid "DHCP client" msgstr "" #: ../../standalone/draknet_.c:481 ../../standalone/draknet_.c:483 msgid "activate now" msgstr "" #: ../../standalone/draknet_.c:481 ../../standalone/draknet_.c:483 msgid "desactivate now" msgstr "" #: ../../standalone/draknet_.c:530 msgid "" "You don't have any internet connection.\n" "Create one first by clicking on 'Configure'" msgstr "" #: ../../standalone/draknet_.c:554 msgid "Internet connection configuration" msgstr "" #: ../../standalone/draknet_.c:558 msgid "Internet Connection Configuration" msgstr "" #: ../../standalone/draknet_.c:567 msgid "Connection type: " msgstr "" #: ../../standalone/draknet_.c:573 msgid "Parameters" msgstr "" #: ../../standalone/draknet_.c:600 msgid "Ethernet Card" msgstr "" #: ../../standalone/draknet_.c:601 msgid "DHCP Client" msgstr "" #: ../../standalone/draknet_.c:603 msgid "Connection timeout (in sec) [ beta, not yet implemented ]" msgstr "" #: ../../standalone/draksec_.c:21 msgid "Welcome To Crackers" msgstr "" #: ../../standalone/draksec_.c:22 msgid "Poor" msgstr "" #: ../../standalone/draksec_.c:26 msgid "Paranoid" msgstr "" #: ../../standalone/draksec_.c:29 msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive: it must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" #: ../../standalone/draksec_.c:32 msgid "" "Password are now enabled, but use as a networked computer is still not " "recommended." msgstr "" #: ../../standalone/draksec_.c:33 msgid "" "Few improvements for this security level, the main one is that there are\n" "more security warnings and checks." msgstr "" #: ../../standalone/draksec_.c:35 msgid "" "This is the standard security recommended for a computer that will be used\n" "to connect to the Internet as a client. There are now security checks. " msgstr "" #: ../../standalone/draksec_.c:37 msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which accept\n" "connections from many clients. " msgstr "" #: ../../standalone/draksec_.c:40 msgid "" "We take level 4 features, but now the system is entirely closed.\n" "Security features are at their maximum." msgstr "" #: ../../standalone/draksec_.c:72 msgid "Setting security level" msgstr "" #: ../../standalone/drakxconf_.c:47 msgid "Control Center" msgstr "" #: ../../standalone/drakxconf_.c:48 msgid "Choose the tool you want to use" msgstr "" #: ../../standalone/keyboarddrake_.c:16 msgid "usage: keyboarddrake [--expert] [keyboard]\n" msgstr "" #: ../../standalone/keyboarddrake_.c:36 msgid "Do you want the BackSpace to return Delete in console?" msgstr "" #: ../../standalone/livedrake_.c:23 msgid "Change Cd-Rom" msgstr "" #: ../../standalone/livedrake_.c:24 msgid "" "Please insert the Installation Cd-Rom in your drive and press Ok when done.\n" "If you don't have it, press Cancel to avoid live upgrade." msgstr "" #: ../../standalone/livedrake_.c:34 msgid "Unable to start live upgrade !!!\n" msgstr "" #: ../../standalone/mousedrake_.c:58 msgid "no serial_usb found\n" msgstr "" #: ../../standalone/mousedrake_.c:62 msgid "Emulate third button?" msgstr "" #: ../../standalone/tinyfirewall_.c:29 msgid "Firewalling Configuration" msgstr "" #: ../../standalone/tinyfirewall_.c:42 msgid "Firewalling configuration" msgstr "" #: ../../standalone/tinyfirewall_.c:77 msgid "" "Firewalling\n" "\n" "You already have set up a firewall.\n" "Click on Configure to change or remove the firewall" msgstr "" #: ../../standalone/tinyfirewall_.c:81 msgid "" "Firewalling\n" "\n" "Click on Configure to set up a standard firewall" msgstr "" #: ../../steps.pm_.c:14 msgid "Choose your language" msgstr "" #: ../../steps.pm_.c:15 msgid "Select installation class" msgstr "" #: ../../steps.pm_.c:16 msgid "Hard drive detection" msgstr "" #: ../../steps.pm_.c:17 msgid "Configure mouse" msgstr "" #: ../../steps.pm_.c:18 msgid "Choose your keyboard" msgstr "" #: ../../steps.pm_.c:19 msgid "Security" msgstr "" #: ../../steps.pm_.c:20 msgid "Setup filesystems" msgstr "" #: ../../steps.pm_.c:21 msgid "Format partitions" msgstr "" #: ../../steps.pm_.c:22 msgid "Choose packages to install" msgstr "" #: ../../steps.pm_.c:23 msgid "Install system" msgstr "" #: ../../steps.pm_.c:25 msgid "Add a user" msgstr "" #: ../../steps.pm_.c:26 msgid "Configure networking" msgstr "" #: ../../steps.pm_.c:28 msgid "Configure services" msgstr "" #: ../../steps.pm_.c:30 msgid "Create a bootdisk" msgstr "" #: ../../steps.pm_.c:32 msgid "Install bootloader" msgstr "" #: ../../steps.pm_.c:33 msgid "Configure X" msgstr "" #: ../../steps.pm_.c:34 msgid "Exit install" msgstr "" #: ../../tinyfirewall.pm_.c:10 msgid "" "tinyfirewall configurator\n" "\n" "This configures a personal firewall for this Mandrake Linux machine.\n" "For a powerful dedicated firewall solution, please look to the\n" "specialized MandrakeSecurity Firewall distribution." msgstr "" #: ../../tinyfirewall.pm_.c:15 msgid "" "We'll now ask you questions about which services you'd like to allow\n" "the Internet to connect to. Please think carefully about these\n" "questions, as your computer's security is important.\n" "\n" "Please, if you're not currently using one of these services, firewall\n" "it off. You can change this configuration anytime you like by\n" "re-running this application!" msgstr "" #: ../../tinyfirewall.pm_.c:22 msgid "" "Are you running a web server on this machine that you need the whole\n" "Internet to see? If you are running a webserver that only needs to be\n" "accessed by this machine, you can safely answer NO here.\n" "\n" msgstr "" #: ../../tinyfirewall.pm_.c:27 msgid "" "Are you running a name server on this machine? If you didn't set one\n" "up to give away IP and zone information to the whole Internet, please\n" "answer no.\n" "\n" msgstr "" #: ../../tinyfirewall.pm_.c:32 msgid "" "Do you want to allow incoming Secure Shell (ssh) connections? This\n" "is a telnet-replacement that you might use to login. If you're using\n" "telnet now, you should definitely switch to ssh. telnet is not\n" "encrypted -- so some attackers can steal your password if you use\n" "it. ssh is encrypted and doesn't allow for this eavesdropping." msgstr "" #: ../../tinyfirewall.pm_.c:37 msgid "" "Do you want to allow incoming telnet connections?\n" "This is horribly unsafe, as we explained in the previous screen. We\n" "strongly recommend answering No here and using ssh in place of\n" "telnet.\n" msgstr "" #: ../../tinyfirewall.pm_.c:42 msgid "" "Are you running an FTP server here that you need accessible to the\n" "Internet? If you are, we strongly recommend that you only use it for\n" "Anonymous transfers. Any passwords sent by FTP can be stolen by some\n" "attackers, since FTP also uses no encryption for transferring passwords.\n" msgstr "" #: ../../tinyfirewall.pm_.c:47 msgid "" "Are you running a mail server here? If you're sending you \n" "messages through pine, mutt or any other text-based mail client,\n" "you probably are. Otherwise, you should firewall this off.\n" "\n" msgstr "" #: ../../tinyfirewall.pm_.c:52 msgid "" "Are you running a POP or IMAP server here? This would\n" "be used to host non-web-based mail accounts for people via \n" "this machine.\n" "\n" msgstr "" #: ../../tinyfirewall.pm_.c:57 msgid "" "You appear to be running a 2.2 kernel. If your network IP\n" "is automatically set by a computer in your home or office \n" "(dynamically assigned), we need to allow for this. Is\n" "this the case?\n" msgstr "" #: ../../tinyfirewall.pm_.c:62 msgid "" "Is your computer getting time syncronized to another computer?\n" "Mostly, this is used by medium-large Unix/Linux organizations\n" "to synchronize time for logging and such. If you're not part\n" "of a larger office and haven't heard of this, you probably \n" "aren't." msgstr "" #: ../../tinyfirewall.pm_.c:67 msgid "" "Configuration complete. May we write these changes to disk?\n" "\n" "\n" "\n" msgstr "" #: ../../tinyfirewall.pm_.c:83 #, c-format msgid "Can't open %s: %s\n" msgstr "" #: ../../tinyfirewall.pm_.c:85 #, c-format msgid "Can't open %s for writing: %s\n" msgstr "" #: ../../share/compssUsers:999 msgid "Web/FTP" msgstr "" #: ../../share/compssUsers:999 msgid "Internet" msgstr "" #: ../../share/compssUsers:999 msgid "Network Computer (client)" msgstr "" #: ../../share/compssUsers:999 msgid "NFS server, SMB server, Proxy server, ssh server" msgstr "" #: ../../share/compssUsers:999 msgid "Office" msgstr "" #: ../../share/compssUsers:999 msgid "Gnome Workstation" msgstr "" #: ../../share/compssUsers:999 msgid "Tools for your Palm Pilot or your Visor" msgstr "" #: ../../share/compssUsers:999 msgid "Workstation" msgstr "" #: ../../share/compssUsers:999 msgid "Firewall/Router" msgstr "" #: ../../share/compssUsers:999 msgid "Domain Name and Network Information Server" msgstr "" #: ../../share/compssUsers:999 msgid "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, gnumeric), pdf viewers, etc" msgstr "" #: ../../share/compssUsers:999 msgid "Audio-related tools: mp3 or midi players, mixers, etc" msgstr "" #: ../../share/compssUsers:999 msgid "Books and Howto's on Linux and Free Software" msgstr "" #: ../../share/compssUsers:999 msgid "KDE Workstation" msgstr "" #: ../../share/compssUsers:999 msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "" #: ../../share/compssUsers:999 msgid "Multimedia - Video" msgstr "" #: ../../share/compssUsers:999 msgid "Set of tools for mail, news, web, file transfer, and chat" msgstr "" #: ../../share/compssUsers:999 msgid "Database" msgstr "" #: ../../share/compssUsers:999 msgid "PostgreSQL or MySQL database server" msgstr "" #: ../../share/compssUsers:999 msgid "Tools to ease the configuration of your computer" msgstr "" #: ../../share/compssUsers:999 msgid "Multimedia - Sound" msgstr "" #: ../../share/compssUsers:999 msgid "Utilities" msgstr "" #: ../../share/compssUsers:999 msgid "Documentation" msgstr "" #: ../../share/compssUsers:999 msgid "Console Tools" msgstr "" #: ../../share/compssUsers:999 msgid "Postfix mail server, Inn news server" msgstr "" #: ../../share/compssUsers:999 msgid "Internet station" msgstr "" #: ../../share/compssUsers:999 msgid "Multimedia station" msgstr "" #: ../../share/compssUsers:999 msgid "Configuration" msgstr "" #: ../../share/compssUsers:999 msgid "More Graphical Desktops (Gnome, IceWM)" msgstr "" #: ../../share/compssUsers:999 msgid "The K Desktop Environment, the basic graphical environment with a collection of accompanying tools" msgstr "" #: ../../share/compssUsers:999 msgid "Graphical Environment" msgstr "" #: ../../share/compssUsers:999 msgid "Development" msgstr "" #: ../../share/compssUsers:999 msgid "Apache, Pro-ftpd" msgstr "" #: ../../share/compssUsers:999 msgid "Tools to create and burn CD's" msgstr "" #: ../../share/compssUsers:999 msgid "Office Workstation" msgstr "" #: ../../share/compssUsers:999 msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "" #: ../../share/compssUsers:999 msgid "Graphics programs such as The Gimp" msgstr "" #: ../../share/compssUsers:999 msgid "DNS/NIS " msgstr "" #: ../../share/compssUsers:999 msgid "C and C++ development libraries, programs and include files" msgstr "" #: ../../share/compssUsers:999 msgid "Network Computer server" msgstr "" #: ../../share/compssUsers:999 msgid "Mail/Groupware/News" msgstr "" #: ../../share/compssUsers:999 msgid "Game station" msgstr "" #: ../../share/compssUsers:999 msgid "Video players and editors" msgstr "" #: ../../share/compssUsers:999 msgid "Multimedia - Graphics" msgstr "" #: ../../share/compssUsers:999 msgid "Amusement programs: arcade, boards, strategy, etc" msgstr "" #: ../../share/compssUsers:999 msgid "Set of tools to read and send mail and news (pine, mutt, tin..) and to browse the Web" msgstr "" #: ../../share/compssUsers:999 msgid "Archiving, emulators, monitoring" msgstr "" #: ../../share/compssUsers:999 msgid "Personal Finance" msgstr "" #: ../../share/compssUsers:999 msgid "A graphical environment with user-friendly set of applications and desktop tools" msgstr "" #: ../../share/compssUsers:999 msgid "Clients for different protocols including ssh" msgstr "" #: ../../share/compssUsers:999 msgid "Internet gateway" msgstr "" #: ../../share/compssUsers:999 msgid "Sound and video playing/editing programs" msgstr "" #: ../../share/compssUsers:999 msgid "Other Graphical Desktops" msgstr "" #: ../../share/compssUsers:999 msgid "Editors, shells, file tools, terminals" msgstr "" #: ../../share/compssUsers:999 msgid "Programs to manage your finance, such as gnucash" msgstr "" #: ../../share/compssUsers:999 msgid "Games" msgstr "" #: ../../share/compssUsers:999 msgid "Personal Information Management" msgstr "" #: ../../share/compssUsers:999 msgid "Multimedia - CD Burning" msgstr "" #: ../../share/compssUsers:999 msgid "Scientific Workstation" msgstr ""