package printer::main; # $Id$ use strict; use common; use run_program; use printer::data; use printer::services; use printer::default; use printer::gimp; use printer::cups; use printer::office; use printer::detect; use services; use vars qw(@ISA @EXPORT); @ISA = qw(Exporter); @EXPORT = qw(%printer_type %printer_type_inv); #-location of the printer database in an installed system my $PRINTER_DB_FILE = "/usr/share/foomatic/db/compiled/overview.xml"; #-Did we already read the subroutines of /usr/sbin/ptal-init? my $ptalinitread = 0; our %printer_type = ( N("Local printer") => "LOCAL", N("Remote printer") => "REMOTE", N("Printer on remote CUPS server") => "CUPS", N("Printer on remote lpd server") => "LPD", N("Network printer (TCP/Socket)") => "SOCKET", N("Printer on SMB/Windows 95/98/NT server") => "SMB", N("Printer on NetWare server") => "NCP", N("Enter a printer device URI") => "URI", N("Pipe job into a command") => "POSTPIPE" ); our %printer_type_inv = reverse %printer_type; our %thedb; #------------------------------------------------------------------------------ sub spooler { # LPD is taken from the menu for the moment because the classic LPD is # highly unsecure. Depending on how the GNU lpr development is going on # LPD support can be reactivated by uncommenting the following line. #return @spooler_inv{qw(cups lpd lprng pdq)}; # LPRng is not officially supported any more since Mandrake 9.0, so # show it only in the spooler menu when it was manually installed. return map { $spoolers{$_}{long_name} } qw(cups pdq), if_(files_exist(qw(/usr/lib/filters/lpf /usr/sbin/lpd)), 'lprng'); } sub printer_type($) { my ($printer) = @_; for ($printer->{SPOOLER}) { /cups/ && return @printer_type_inv{qw(LOCAL LPD SOCKET SMB), if_($::expert, qw(URI))}; /lpd/ && return @printer_type_inv{qw(LOCAL LPD SOCKET SMB NCP), if_($::expert, qw(POSTPIPE URI))}; /lprng/ && return @printer_type_inv{qw(LOCAL LPD SOCKET SMB NCP), if_($::expert, qw(POSTPIPE URI))}; /pdq/ && return @printer_type_inv{qw(LOCAL LPD SOCKET), if_($::expert, qw(URI))}; } } sub SIGHUP_daemon { my ($service) = @_; if ($service eq "cupsd") { $service = "cups" }; # PDQ has no daemon, exit. if ($service eq "pdq") { return 1 }; # CUPS needs auto-correction for its configuration run_program::rooted($::prefix, "/usr/sbin/correctcupsconfig") if $service eq "cups"; # Name of the daemon my %daemons = ( "lpr" => "lpd", "lpd" => "lpd", "lprng" => "lpd", "cups" => "cupsd", "devfs" => "devfsd", ); my $daemon = $daemons{$service}; $daemon = $service unless defined $daemon; # if ($service eq "cups") { # # The current CUPS (1.1.13) dies on SIGHUP, do the normal restart. # printer::services::restart($service); # # CUPS needs some time to come up. # printer::services::wait_for_cups(); # } else { # Send the SIGHUP run_program::rooted($::prefix, "/usr/bin/killall", "-HUP", $daemon); if ($service eq "cups") { # CUPS needs some time to come up. printer::services::wait_for_cups(); } return 1; } sub assure_device_is_available_for_cups { # Checks whether CUPS already "knows" a certain port, it does not # know it usually when the appropriate kernel module is loaded # after CUPS was started or when the printer is turned on after # CUPS was started. CUPS 1.1.12 and newer refuses to set up queues # on devices which it does not know, it points these queues to # file:/dev/null instead. Restart CUPS if necessary to assure that # CUPS knows the device. my ($device) = @_; my ($result, $i); for ($i = 0; $i < 3; $i++) { local *F; open F, ($::testing ? $::prefix : "chroot $::prefix/ ") . "/bin/sh -c \"export LC_ALL=C; /usr/sbin/lpinfo -v\" |" or die "Could not run \"lpinfo\"!"; while (my $line = ) { if ($line =~ /$device/) { # Found a line containing the device # name, so CUPS knows it. close F; return 1; } } close F; $result = SIGHUP_daemon("cups"); } return $result; } sub spooler_in_security_level { # Was the current spooler already added to the current security level? my ($spooler, $level) = @_; my $sp; $sp = $spooler eq "lpr" || $spooler eq "lprng" ? "lpd" : $spooler; my $file = "$::prefix/etc/security/msec/server.$level"; if (-f $file) { local *F; open F, "< $file" or return 0; while (my $line = ) { if ($line =~ /^\s*$sp\s*$/) { close F; return 1; } } close F; } return 0; } sub add_spooler_to_security_level { my ($spooler, $level) = @_; my $sp; $sp = $spooler eq "lpr" || $spooler eq "lprng" ? "lpd" : $spooler; my $file = "$::prefix/etc/security/msec/server.$level"; if (-f $file) { eval { append_to_file($file, "$sp\n") } or return 0; } return 1; } sub pdq_panic_button { my $setting = $_[0]; if (-f "$::prefix/usr/sbin/pdqpanicbutton") { run_program::rooted($::prefix, "/usr/sbin/pdqpanicbutton", "--$setting") or die "Could not $setting PDQ panic buttons!"; } } sub copy_printer_params($$) { my ($from, $to) = @_; map { $to->{$_} = $from->{$_} } grep { $_ ne 'configured' } keys %$from; #- avoid cycles-----------------^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ } sub getinfo($) { my ($prefix) = @_; my $printer = {}; $::prefix = $prefix; # Initialize $printer data structure resetinfo($printer); return $printer; } #------------------------------------------------------------------------------ sub resetinfo($) { my ($printer) = @_; $printer->{QUEUE} = ""; $printer->{OLD_QUEUE} = ""; $printer->{OLD_CHOICE} = ""; $printer->{ARGS} = ""; $printer->{DBENTRY} = ""; $printer->{DEFAULT} = ""; $printer->{currentqueue} = {}; # -check which printing system was used previously and load the information # -about its queues read_configured_queues($printer); } sub read_configured_queues($) { my ($printer) = @_; my @QUEUES; # Get the default spooler choice from the config file $printer->{SPOOLER} ||= printer::default::get_spooler(); if (!$printer->{SPOOLER}) { #- Find the first spooler where there are queues foreach my $spooler (qw(cups pdq lprng lpd)) { #- Is the spooler's daemon running? my $service = $spooler; if ($service eq "lprng") { $service = "lpd"; } if ($service ne "pdq") { next unless services::is_service_running($service); # daemon is running, spooler found $printer->{SPOOLER} = $spooler; } #- poll queue info local *F; open F, ($::testing ? $::prefix : "chroot $::prefix/ ") . "foomatic-configure -P -q -s $spooler |" or die "Could not run foomatic-configure"; eval join('', ); close F; if ($service eq "pdq") { #- Have we found queues? PDQ has no damon, so we consider #- it in use when there are defined printer queues if ($#QUEUES != -1) { $printer->{SPOOLER} = $spooler; last; } } else { #- For other spoolers we have already found a running #- daemon when we have arrived here last; } } } else { #- Poll the queues of the current default spooler local *F; open F, ($::testing ? $::prefix : "chroot $::prefix/ ") . "foomatic-configure -P -q -s $printer->{SPOOLER} |" or die "Could not run foomatic-configure"; eval join('', ); close F; } $printer->{configured} = {}; my $i; my $N = $#QUEUES + 1; for ($i = 0; $i < $N; $i++) { $printer->{configured}{$QUEUES[$i]{queuedata}{queue}} = $QUEUES[$i]; if (!$QUEUES[$i]{make} || !$QUEUES[$i]{model}) { if ($printer->{SPOOLER} eq "cups") { $printer->{OLD_QUEUE} = $QUEUES[$i]{queuedata}{queue}; my $descr = get_descr_from_ppd($printer); $descr =~ m/^([^\|]*)\|([^\|]*)(\|.*|)$/; $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{make} ||= $1; $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{model} ||= $2; # Read out which PPD file was originally used to set up this # queue local *F; if (open F, "< $::prefix/etc/cups/ppd/$QUEUES[$i]{queuedata}{queue}.ppd") { while (my $line = ) { if ($line =~ /^\*%MDKMODELCHOICE:(.+)$/) { $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{ppd} = $1; } } close F; } # Mark that we have a CUPS queue but do not know the name # the PPD file in /usr/share/cups/model if (!$printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{ppd}) { $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{ppd} = '1'; } $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{driver} = 'CUPS/PPD'; $printer->{OLD_QUEUE} = ""; # Read out the printer's options $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{args} = read_cups_options($QUEUES[$i]{queuedata}{queue}); } $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{make} ||= ""; $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{model} ||= N("Unknown model"); } else { $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{make} = $QUEUES[$i]{make}; $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{model} = $QUEUES[$i]{model}; } # Fill in "options" field if (my $args = $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{args}) { my @options; foreach my $arg (@{$args}) { push(@options, "-o"); my $optstr = $arg->{name} . "=" . $arg->{default}; push(@options, $optstr); } @{$printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{options}} = @options; } # Construct an entry line for tree view in main window of # printerdrake make_menuentry($printer, $QUEUES[$i]{queuedata}{queue}); } } sub make_menuentry { my ($printer, $queue) = @_; my $spooler = $shortspooler_inv{$printer->{SPOOLER}}{short_name}; my $connect = $printer->{configured}{$queue}{queuedata}{connect}; my $localremote; if ($connect =~ m!^(file|parallel|usb|serial):! || $connect =~ m!^ptal:/mlc:! || $connect =~ m!^mtink:!) { $localremote = N("Local Printers"); } else { $localremote = N("Remote Printers"); } my $make = $printer->{configured}{$queue}{queuedata}{make}; my $model = $printer->{configured}{$queue}{queuedata}{model}; my $connection; if ($connect =~ m!^(file|parallel):/dev/lp(\d+)$!) { my $number = $2; $connection = N(" on parallel port \#%s", $number); } elsif ($connect =~ m!^(file|usb):/dev/usb/lp(\d+)$!) { my $number = $2; $connection = N(", USB printer \#%s", $number); } elsif ($connect =~ m!^usb://!) { $connection = N(", USB printer"); } elsif ($connect =~ m!^ptal:/(.+)$!) { my $ptaldevice = $1; if ($ptaldevice =~ /^mlc:par:(\d+)$/) { my $number = $1; $connection = N(", multi-function device on parallel port \#%s", $number); } elsif ($ptaldevice =~ /^mlc:usb:/) { $connection = N(", multi-function device on USB"); } elsif ($ptaldevice =~ /^hpjd:/) { $connection = N(", multi-function device on HP JetDirect"); } else { $connection = N(", multi-function device"); } } elsif ($connect =~ m!^file:(.+)$!) { $connection = N(", printing to %s", $1); } elsif ($connect =~ m!^lpd://([^/]+)/([^/]+)/?$!) { $connection = N(" on LPD server \"%s\", printer \"%s\"", $2, $1); } elsif ($connect =~ m!^socket://([^/:]+):([^/:]+)/?$!) { $connection = N(", TCP/IP host \"%s\", port %s", $1, $2); } elsif ($connect =~ m!^smb://([^/\@]+)/([^/\@]+)/?$! || $connect =~ m!^smb://.*/([^/\@]+)/([^/\@]+)/?$! || $connect =~ m!^smb://.*\@([^/\@]+)/([^/\@]+)/?$!) { $connection = N(" on SMB/Windows server \"%s\", share \"%s\"", $1, $2); } elsif ($connect =~ m!^ncp://([^/\@]+)/([^/\@]+)/?$! || $connect =~ m!^ncp://.*/([^/\@]+)/([^/\@]+)/?$! || $connect =~ m!^ncp://.*\@([^/\@]+)/([^/\@]+)/?$!) { $connection = N(" on Novell server \"%s\", printer \"%s\"", $1, $2); } elsif ($connect =~ m!^postpipe:(.+)$!) { $connection = N(", using command %s", $1); } else { $connection = ($::expert ? ", URI: $connect" : ""); } my $sep = "!"; $printer->{configured}{$queue}{queuedata}{menuentry} = ($::expert ? "$spooler$sep" : "") . "$localremote$sep$queue: $make $model$connection"; } sub read_printer_db(;$) { my $spooler = $_[0]; my $dbpath = $::prefix . $PRINTER_DB_FILE; local *DBPATH; #- don't have to do close ... and don't modify globals at least # Generate the Foomatic printer/driver overview, read it from the # appropriate file when it is already generated if (!(-f $dbpath)) { open DBPATH, ($::testing ? $::prefix : "chroot $::prefix/ ") . #-# "foomatic-configure -O -q |" or die "Could not run foomatic-configure"; } else { open DBPATH, $dbpath or die "An error occurred on $dbpath : $!"; #-# } my $entry = {}; my $inentry = 0; my $indrivers = 0; my $inautodetect = 0; my $autodetecttype = ""; local $_; while () { chomp; if ($inentry) { # We are inside a printer entry if ($indrivers) { # We are inside the drivers block of a printers entry if (m!^\s*\s*$!) { # End of drivers block $indrivers = 0; } elsif (m!^\s*(.+)\s*$!) { push @{$entry->{drivers}}, $1; } } elsif ($inautodetect) { # We are inside the autodetect block of a printers entry # All entries inside this block will be ignored if ($autodetecttype) { if (m!^.*\s*$!) { # End of parallel, USB, or SNMP section $autodetecttype = ""; } elsif (m!^\s*\s*([^<>]+)\s*\s*$!) { # Manufacturer $entry->{devidmake} = $1; } elsif (m!^\s*\s*([^<>]+)\s*\s*$!) { # Model $entry->{devidmodel} = $1; } elsif (m!^\s*\s*([^<>]+)\s*\s*$!) { # Description $entry->{deviddesc} = $1; } elsif (m!^\s*\s*([^<>]+)\s*\s*$!) { # Command set $entry->{devidcmdset} = $1; } } else { if (m!^.*\s*$!) { # End of autodetect block $inautodetect = 0; } elsif (m!^\s*<(parallel|usb|snmp)>\s*$!) { # Beginning of parallel, USB, or SNMP section $autodetecttype = $1; } } } else { if (m!^\s*\s*$!) { # entry completed $inentry = 0; # Expert mode: # Make one database entry per driver with the entry name # manufacturer|model|driver if ($::expert) { foreach my $driver (@{$entry->{drivers}}) { my $driverstr; if ($driver eq "Postscript") { $driverstr = "PostScript"; } else { $driverstr = "GhostScript + $driver"; } if ($driver eq $entry->{defaultdriver}) { $driverstr .= " (recommended)"; } $entry->{ENTRY} = "$entry->{make}|$entry->{model}|$driverstr"; $entry->{ENTRY} =~ s/^CITOH/C.ITOH/i; $entry->{ENTRY} =~ s/^KYOCERA[\s\-]*MITA/KYOCERA/i; $entry->{driver} = $driver; # Duplicate contents of $entry because it is multiply entered to the database map { $thedb{$entry->{ENTRY}}{$_} = $entry->{$_} } keys %$entry; } } else { # Recommended mode # Make one entry per printer, with the recommended # driver (manufacturerer|model) $entry->{ENTRY} = "$entry->{make}|$entry->{model}"; $entry->{ENTRY} =~ s/^CITOH/C.ITOH/i; $entry->{ENTRY} =~ s/^KYOCERA[\s\-]*MITA/KYOCERA/i; if ($entry->{defaultdriver}) { $entry->{driver} = $entry->{defaultdriver}; map { $thedb{$entry->{ENTRY}}{$_} = $entry->{$_} } keys %$entry; } } $entry = {}; } elsif (m!^\s*\s*([^\s<>]+)\s*\s*$!) { # Foomatic printer ID $entry->{printer} = $1; } elsif (m!^\s*(.+)\s*$!) { # Printer manufacturer $entry->{make} = uc($1); } elsif (m!^\s*(.+)\s*$!) { # Printer model $entry->{model} = $1; } elsif (m!(.+)!) { # Printer default driver $entry->{defaultdriver} = $1; } elsif (m!^\s*\s*$!) { # Drivers block $indrivers = 1; @{$entry->{drivers}} = (); } elsif (m!^\s*\s*$!) { # Autodetect block $inautodetect = 1; } } } else { if (m!^\s*\s*$!) { # new entry $inentry = 1; } } } close DBPATH; # Add raw queue if ($spooler ne "pdq") { $entry->{ENTRY} = N("Raw printer (No driver)"); $entry->{driver} = "raw"; $entry->{make} = ""; $entry->{model} = N("Unknown model"); map { $thedb{$entry->{ENTRY}}{$_} = $entry->{$_} } keys %$entry; } #- Load CUPS driver database if CUPS is used as spooler if ($spooler && $spooler eq "cups") { poll_ppd_base(); } #my @entries_db_short = sort keys %printer::thedb; #%descr_to_db = map { $printer::thedb{$_}{DESCR}, $_ } @entries_db_short; #%descr_to_help = map { $printer::thedb{$_}{DESCR}, $printer::thedb{$_}{ABOUT} } @entries_db_short; #@entry_db_description = keys %descr_to_db; #db_to_descr = reverse %descr_to_db; } sub read_foomatic_options ($) { my ($printer) = @_; # Generate the option data for the chosen printer/driver combo my $COMBODATA; local *F; open F, ($::testing ? $::prefix : "chroot $::prefix/ ") . "foomatic-configure -P -q -p $printer->{currentqueue}{printer}" . " -d $printer->{currentqueue}{driver}" . ($printer->{OLD_QUEUE} ? " -s $printer->{SPOOLER} -n $printer->{OLD_QUEUE}" : "") . ($printer->{SPECIAL_OPTIONS} ? " $printer->{SPECIAL_OPTIONS}" : "") . " |" or die "Could not run foomatic-configure"; eval join('', ()); close F; # Return the arguments field return $COMBODATA->{args}; } sub read_cups_options ($) { my ($queue_or_file) = @_; # Generate the option data from a CUPS PPD file/a CUPS queue # Use the same Perl data structure as Foomatic uses to be able to # reuse the dialog local *F; if ($queue_or_file =~ /.ppd.gz$/) { # compressed PPD file open F, ($::testing ? $::prefix : "chroot $::prefix/ ") . #-# "gunzip -cd $queue_or_file | lphelp - |" or return 0; } else { # PPD file not compressed or queue open F, ($::testing ? $::prefix : "chroot $::prefix/ ") . #-# "lphelp $queue_or_file |" or return 0; } my $i; my $j; my @args; my $line; my $inoption = 0; my $inchoices = 0; # my $innumerical = 0; while ($line = ) { chomp $line; if ($inoption) { if ($inchoices) { if ($line =~ /^\s*(\S+)\s+(\S.*)$/) { push(@{$args[$i]{vals}}, {}); $j = $#{$args[$i]{vals}}; $args[$i]{vals}[$j]{value} = $1; my $comment = $2; # Did we find the default setting? if ($comment =~ /default\)\s*$/) { $args[$i]{default} = $args[$i]{vals}[$j]{value}; $comment =~ s/,\s*default\)\s*$//; } else { $comment =~ s/\)\s*$//; } # Remove opening paranthese $comment =~ s/^\(//; # Remove page size info $comment =~ s/,\s*size:\s*[0-9\.]+x[0-9\.]+in$//; $args[$i]{vals}[$j]{comment} = $comment; } elsif ($line =~ /^\s*$/ && $#{$args[$i]{vals}} > -1) { $inchoices = 0; $inoption = 0; } # } elsif ($innumerical == 1) { # if ($line =~ /^\s*The default value is ([0-9\.]+)\s*$/) { # $args[$i]{default} = $1; # $innumerical = 0; # $inoption = 0; # } } else { if ($line =~ /^\s*/) { $inchoices = 1; # } elsif ($line =~ /^\s* must be a(.*) number in the range ([0-9\.]+)\.\.([0-9\.]+)\s*$/) { # delete($args[$i]{vals}); # $args[$i]{min} = $2; # $args[$i]{max} = $3; # my $type = $1; # if ($type =~ /integer/) { # $args[$i]{type} = 'int'; # } else { # $args[$i]{type} = 'float'; # } # $innumerical = 1; } } } else { if ($line =~ /^\s*([^\s:][^:]*):\s+-o\s+([^\s=]+)=\s*$/) { # if ($line =~ /^\s*([^\s:][^:]*):\s+-o\s+([^\s=]+)=<.*>\s*$/) { $inoption = 1; push(@args, {}); $i = $#args; $args[$i]{comment} = $1; $args[$i]{name} = $2; $args[$i]{type} = 'enum'; @{$args[$i]{vals}} = (); } } } close F; # Return the arguments field return \@args; } sub set_cups_special_options { my ($queue) = $_[0]; # Set some special CUPS options my @lpoptions = chomp_(cat_("$::prefix/etc/cups/lpoptions")); # If nothing is already configured, set text file borders of half an inch # and decrease the font size a little bit, so nothing of the text gets # cut off by unprintable borders. if (!any { /$queue.*\s(page-(top|bottom|left|right)|lpi|cpi)=/ } @lpoptions) { run_program::rooted($::prefix, "lpoptions", "-p", $queue, "-o", "page-top=36", "-o", "page-bottom=36", "-o", "page-left=36", "-o page-right=36", "-o", "cpi=12", "-o", "lpi=7", "-o", "wrap"); } # Let images fill the whole page by default if (!any { /$queue.*\s(scaling|natural-scaling|ppi)=/ } @lpoptions) { run_program::rooted($::prefix, "lpoptions", "-p", $queue, "-o", "scaling=100"); } return 1; } sub set_cups_autoconf { my $autoconf = $_[0]; # Read config file my $file = "$::prefix/etc/sysconfig/printing"; my @file_content = cat_($file); # Remove all valid "CUPS_CONFIG" lines /^\s*CUPS_CONFIG/ and $_ = "" foreach @file_content; # Insert the new "CUPS_CONFIG" line if ($autoconf) { push @file_content, "CUPS_CONFIG=automatic\n"; } else { push @file_content, "CUPS_CONFIG=manual\n"; } output($file, @file_content); # Restart CUPS if ($autoconf) { printer::services::restart("cups"); } return 1; } sub get_cups_autoconf { local *F; open F, "< $::prefix/etc/sysconfig/printing" or return 1; while (my $line = ) { return 0 if $line =~ m!^[^\#]*CUPS_CONFIG=manual!; } return 1; } sub set_usermode { my $usermode = $_[0]; $::expert = $usermode; # Read config file local *F; my $file = "$::prefix/etc/sysconfig/printing"; my @file_content; if (!(-f $file)) { @file_content = (); } else { open F, "< $file" or die "Cannot open $file!"; @file_content = ; close F; } # Remove all valid "USER_MODE" lines (/^\s*USER_MODE/ and $_ = "") foreach @file_content; # Insert the new "USER_MODE" line if ($usermode) { push @file_content, "USER_MODE=expert\n"; } else { push @file_content, "USER_MODE=recommended\n"; } # Write back modified file open F, "> $file" or die "Cannot open $file!"; print F @file_content; close F; return 1; } sub get_usermode { my %cfg = getVarsFromSh("$::prefix/etc/sysconfig/printing"); $::expert = $cfg{USER_MODE} eq 'expert' ? 1 : 0; return $::expert; } #---------------------------------------------------------------------- # Handling of /etc/cups/cupsd.conf sub read_cupsd_conf { cat_("$::prefix/etc/cups/cupsd.conf"); } sub write_cupsd_conf { my (@cupsd_conf) = @_; output("$::prefix/etc/cups/cupsd.conf", @cupsd_conf); #- restart cups after updating configuration. printer::services::restart("cups"); } sub read_directives { # Read one or more occurences of a directive from the cupsd.conf file # or from a ripped-out location block my ($lines_ptr, $directive) = @_; my @result = (); ($_ =~ /^\s*$directive\s+(\S.*)$/ and push(@result, $1)) foreach @{$lines_ptr}; (chomp) foreach @result; return @result; } sub read_unique_directive { # Read a directive from the from the cupsd.conf file or from a # ripped-out location block, if the directive appears more than once, # use the last occurence and remove all the others, if it does not # occur, return the default value my ($lines_ptr, $directive, $default) = @_; if ((my @d = read_directives($lines_ptr, $directive)) > 0) { my $value = @d[$#d]; set_directive($lines_ptr, "$directive $value"); return $value; } else { return $default; } } sub insert_directive { # Insert a directive into the cupsd.conf file or into a ripped-out # location block (but only if it is not already there) my ($lines_ptr, $directive) = @_; ($_ =~ /^\s*$directive$/ and return 0) foreach @{$lines_ptr}; splice(@{$lines_ptr}, -1, 0, "$directive\n"); return 1; } sub remove_directive { # Remove a directive from the cupsd.conf file or from a ripped-out # location block my ($lines_ptr, $directive) = @_; my $success = 0; ($_ =~ /^\s*$directive/ and $_ = "" and $success = 1) foreach @{$lines_ptr}; return $success; } sub replace_directive { # Replace a directive in the cupsd.conf file or from a ripped-out # location block, if the directive appears more than once, remove # the additional occurences my ($lines_ptr, $olddirective, $newdirective) = @_; $newdirective = "$newdirective\n"; my $success = 0; ($_ =~ /^\s*$olddirective/ and $_ = $newdirective and $success = 1 and $newdirective = "") foreach @{$lines_ptr}; return $success; } sub set_directive { # Set a directive in the cupsd.conf, replace the old definition or # a commented definition my ($cupsd_conf_ptr, $directive) = @_; my $olddirective = $directive; $olddirective =~ s/^\s*(\S+)\s+.*$/$1/s; return (replace_directive($cupsd_conf_ptr, $olddirective, $directive) or replace_directive($cupsd_conf_ptr, "\#$olddirective", $directive) or insert_directive($cupsd_conf_ptr, $directive)); } sub read_location { # Return the lines inside the [path] location block # # # ... # my ($cupsd_conf_ptr, $path) = @_; my @result = (); if (grep(m!^\s*!, @{$cupsd_conf_ptr})) { my $location_start = -1; my $location_end = -1; # Go through all the lines, bail out when start and end line found for (my $i = 0; ($i <= $#{$cupsd_conf_ptr}) and ($location_end == -1); $i++) { if ($cupsd_conf_ptr->[$i] =~ m!^\s*<\s*Location\s+$path\s*>!) { # Start line of block $location_start = $i; } elsif (($cupsd_conf_ptr->[$i] =~ m!^\s*<\s*/Location\s*>!) and ($location_start != -1)) { # End line of block $location_end = $i; last; } elsif (($location_start >= 0) and ($location_end < 0)) { # Inside the location block push(@result, $cupsd_conf_ptr->[$i]); } } } else { # If there is no root location block, set the result array to # "undef" @result = undef; } return (@result); } sub rip_location { # Cut out the [path] location block # # # ... # # # so that it can be treated seperately without affecting the # rest of the file my ($cupsd_conf_ptr, $path) = @_; my @location = (); my $location_start = -1; my $location_end = -1; if (grep(m!^\s*!, @{$cupsd_conf_ptr})) { # Go through all the lines, bail out when start and end line found for (my $i = 0; ($i <= $#{$cupsd_conf_ptr}) and ($location_end == -1); $i++) { if ($cupsd_conf_ptr->[$i] =~ m!^\s*<\s*Location\s+$path\s*>!) { # Start line of block $location_start = $i; } elsif (($cupsd_conf_ptr->[$i] =~ m!^\s*<\s*/Location\s*>!) and ($location_start != -1)) { # End line of block $location_end = $i; last; } } # Rip out the block and store it seperately @location = splice(@{$cupsd_conf_ptr},$location_start, $location_end - $location_start + 1); } else { # If there is no location block, create one $location_start = $#{$cupsd_conf_ptr} + 1; @location = (); push @location, "\n"; push @location, "\n"; } return ($location_start, @location); } sub insert_location { # Re-insert a location block ripped with "rip_location" my ($cupsd_conf_ptr, $location_start, @location) = @_; splice(@{$cupsd_conf_ptr}, $location_start,0,@location); } sub add_to_location { # Add a directive to a given location (only if it is not already there) my ($cupsd_conf_ptr, $path, $directive) = @_; my ($location_start, @location) = rip_location($cupsd_conf_ptr, $path); my $success = insert_directive(\@location, $directive); insert_location($cupsd_conf_ptr, $location_start, @location); return $success; } sub remove_from_location { # Remove a directive from a given location my ($cupsd_conf_ptr, $path, $directive) = @_; my ($location_start, @location) = rip_location($cupsd_conf_ptr, $path); my $success = remove_directive(\@location, $directive); insert_location($cupsd_conf_ptr, $location_start, @location); return $success; } sub replace_in_location { # Replace a directive in a given location my ($cupsd_conf_ptr, $path, $olddirective, $newdirective) = @_; my ($location_start, @location) = rip_location($cupsd_conf_ptr, $path); my $success = replace_directive(\@location, $olddirective, $newdirective); insert_location($cupsd_conf_ptr, $location_start, @location); return $success; } sub add_allowed_host { # Add a host or network which should get access to the local printer(s) my ($cupsd_conf_ptr, $host) = @_; return (insert_directive($cupsd_conf_ptr, "BrowseAddress $host") and add_to_location($cupsd_conf_ptr, "/", "Allow From $host")); } sub remove_allowed_host { # Remove a host or network which should get access to the local # printer(s) my ($cupsd_conf_ptr, $host) = @_; return (remove_directive($cupsd_conf_ptr, "BrowseAddress $host") and remove_from_location($cupsd_conf_ptr, "/", "Allow From $host")); } sub replace_allowed_host { # Remove a host or network which should get access to the local # printer(s) my ($cupsd_conf_ptr, $oldhost, $newhost) = @_; return (replace_directive($cupsd_conf_ptr, "BrowseAddress $oldhost", "BrowseAddress $newhost") and replace_in_location($cupsd_conf_ptr, "/", "Allow From $newhost", "Allow From $newhost")); } sub broadcastaddress { # Determines the broadcast address (for "BrowseAddress" line) for # a given network IP my ($address) = @_; if ($address =~ /^\d+\.\*$/) { $address =~ s/\*$/255.255.255/; } elsif ($address =~ /^\d+\.\d+\.\*$/) { $address =~ s/\*$/255.255/; } elsif ($address =~ /^\d+\.\d+\.\d+\.\*$/) { $address =~ s/\*$/255/; } elsif ($address =~ /^(\d+)\.(\d+)\.(\d+)\.(\d+)\/(\d+)$/) { my $numadr = ($1 << 24) + ($2 << 16) + ($3 << 8) + $4; my $mask = ((1 << $5) - 1) << (32 - $5); my $broadcast = $numadr | (~$mask); $address = (($broadcast & (255 << 24)) >> 24) . '.' . (($broadcast & (255 << 16)) >> 16) . '.' . (($broadcast & (255 << 8)) >> 8) . '.' . ($broadcast & 255); } elsif ($address =~ /^(\d+)\.(\d+)\.(\d+)\.(\d+)\/(\d+)\.(\d+)\.(\d+)\.(\d+)$/) { my $numadr = ($1 << 24) + ($2 << 16) + ($3 << 8) + $4; my $mask = ($5 << 24) + ($6 << 16) + ($7 << 8) + $8; my $broadcast = $numadr | (~$mask); $address = (($broadcast & (255 << 24)) >> 24) . '.' . (($broadcast & (255 << 16)) >> 16) . '.' . (($broadcast & (255 << 8)) >> 8) . '.' . ($broadcast & 255); } return $address; } sub networkaddress { # Guesses a network address for a given broadcast address my ($address) = @_; if ($address =~ /\.255$/) { while ($address =~ s/\.255$//) {}; $address .= ".*"; } return $address; } sub localprintersshared { # Do we broadcast our local printers my ($printer) = @_; return (($printer->{cupsconfig}{keys}{Browsing} !~ /off/i) && ($printer->{cupsconfig}{keys}{BrowseInterval} != 0) && ($#{$printer->{cupsconfig}{keys}{BrowseAddress}} >= 0)); } sub remotebroadcastsaccepted { # Do we accept broadcasts from remote CUPS servers? my ($printer) = @_; # Is browsing not turned on at all? if ($printer->{cupsconfig}{keys}{Browsing} =~ /off/i) { return 0; } # No "BrowseDeny" lines at all if ($#{$printer->{cupsconfig}{keys}{BrowseDeny}} < 0) { return 1; } my $havedenyall = (join('', @{$printer->{cupsconfig}{keys}{BrowseDeny}}) =~ /All/im); my $havedenylocal = (join('', @{$printer->{cupsconfig}{keys}{BrowseDeny}}) =~ /\@LOCAL/im); my $orderallowdeny = ($printer->{cupsconfig}{keys}{BrowseOrder} =~ /allow\s*,\s*deny/i); my $haveallowremote = 0; for my $allowline (@{$printer->{cupsconfig}{keys}{BrowseAllow}}) { next if ($allowline =~ /^\s*(localhost|0*127\.0+\.0+\.0*1|none)\s*$/i); $haveallowremote = 1; } # A line denying all (or at least the all LANs) together with the order # "allow,deny" or without "BrowseAllow" lines (which allow the # broadcasts of at least one remote resource). if (($havedenyall || $havedenylocal) && ($orderallowdeny || !$haveallowremote)) { return 0; } return 1; } sub clientnetworks { # Determine the client networks to which the printers will be # shared If the configuration is supported by our simplified # interface ("Deny From All", "Order Deny,Allow", "Allow From ..." # lines in " ... ", a "BrowseAddress ..." # line for each "Allow From ..." line), return the list of allowed # client networks ("Allow"/"BrowseAddress" lines), if not, return # the list of all items which are at least one of the # "BrowseAddresse"s or one of the "Allow From" addresses together # with a flag that the setup is not supported. my ($printer) = @_; # Check for a "Deny From All" line my $havedenyfromall = (join('', @{$printer->{cupsconfig}{root}{DenyFrom}}) =~ /All/im); # Check for "Order Deny,Allow" my $orderdenyallow = ($printer->{cupsconfig}{root}{Order} =~ /deny\s*,\s*allow/i); my @sharehosts; my $haveallowfromlocalhost = 0; my $haveallowedhostwithoutbrowseaddress = 0; # Go through all "Allow From" lines for my $line (@{$printer->{cupsconfig}{root}{AllowFrom}}) { if ($line =~ /^\s*(localhost|0*127\.0+\.0+\.0*1)\s*$/i) { # Line pointing to localhost $haveallowfromlocalhost = 1; } elsif ($line =~ /^\s*(none)\s*$/i) { # Skip "Allow From None" lines } elsif (!member($line, @sharehosts)) { # Line pointing to remote server push(@sharehosts, $line); if (!member(broadcastaddress($line), @{$printer->{cupsconfig}{keys}{BrowseAddress}})) { $haveallowedhostwithoutbrowseaddress = 1; } } } my $havebrowseaddresswithoutallowedhost = 0; # Go through all "BrowseAdress" lines for my $line (@{$printer->{cupsconfig}{keys}{BrowseAddress}}) { if ($line =~ /^\s*(localhost|0*127\.0+\.0+\.0*1)\s*$/i) { # Skip lines pointing to localhost } elsif ($line =~ /^\s*(none)\s*$/i) { # Skip "Allow From None" lines } elsif (!member($line, map {broadcastaddress($_)} @sharehosts)) { # Line pointing to remote server push(@sharehosts, networkaddress($line)); $havebrowseaddresswithoutallowedhost = 1; } } my $configunsupported = (!$havedenyfromall || !$orderdenyallow || !$haveallowfromlocalhost || $haveallowedhostwithoutbrowseaddress || $havebrowseaddresswithoutallowedhost); return ($configunsupported, @sharehosts); } sub makesharehostlist { # Human-readable strings for hosts onto which the local printers # are shared my ($printer) = @_; my @sharehostlist; my %sharehosthash; for my $host (@{$printer->{cupsconfig}{clientnetworks}}) { if ($host =~ /\@LOCAL/i) { $sharehosthash{$host} = N("Local network(s)"); } elsif ($host =~ /\@IF\((.*)\)/i) { $sharehosthash{$host} = N("Interface \"%s\"", $1); } elsif ($host =~ /(\/|^\*|\*$|^\.)/i) { $sharehosthash{$host} = N("Network %s", $host); } else { $sharehosthash{$host} = N("Host %s", $host); } push(@sharehostlist, $sharehosthash{$host}); } my %sharehosthash_inv = reverse %sharehosthash; return { list => \@sharehostlist, hash => \%sharehosthash, invhash => \%sharehosthash_inv }; } sub is_network_ip { # Determine whwther the given string is a valid network IP my ($address) = @_; ($address =~ /^(\d+)\.(\d+)\.(\d+)\.(\d+)$/) || ($address =~ /^(\d+\.){1,3}\*$/) || ($address =~ /^(\d+)\.(\d+)\.(\d+)\.(\d+)\/(\d+)$/) || ($address =~ /^(\d+)\.(\d+)\.(\d+)\.(\d+)\/(\d+)\.(\d+)\.(\d+)\.(\d+)$/); } sub read_cups_config { # Read the information relevant to the printer sharing dialog from # the CUPS configuration my ($printer) = @_; # From /etc/cups/cupsd.conf # Keyword "Browsing" $printer->{cupsconfig}{keys}{Browsing} = read_unique_directive($printer->{cupsconfig}{cupsd_conf}, 'Browsing', 'On'); # Keyword "BrowseInterval" $printer->{cupsconfig}{keys}{BrowseInterval} = read_unique_directive($printer->{cupsconfig}{cupsd_conf}, 'BrowseInterval', '30'); # Keyword "BrowseAddress" @{$printer->{cupsconfig}{keys}{BrowseAddress}} = read_directives($printer->{cupsconfig}{cupsd_conf}, 'BrowseAddress'); # Keyword "BrowseAllow" @{$printer->{cupsconfig}{keys}{BrowseAllow}} = read_directives($printer->{cupsconfig}{cupsd_conf}, 'BrowseAllow'); # Keyword "BrowseDeny" @{$printer->{cupsconfig}{keys}{BrowseDeny}} = read_directives($printer->{cupsconfig}{cupsd_conf}, 'BrowseDeny'); # Keyword "BrowseOrder" $printer->{cupsconfig}{keys}{BrowseOrder} = read_unique_directive($printer->{cupsconfig}{cupsd_conf}, 'BrowseOrder', 'deny,allow'); # Root location @{$printer->{cupsconfig}{rootlocation}} = read_location($printer->{cupsconfig}{cupsd_conf}, '/'); # Keyword "Allow from" @{$printer->{cupsconfig}{root}{AllowFrom}} = read_directives($printer->{cupsconfig}{rootlocation}, 'Allow From'); # Keyword "Deny from" @{$printer->{cupsconfig}{root}{DenyFrom}} = read_directives($printer->{cupsconfig}{rootlocation}, 'Deny From'); # Keyword "Order" $printer->{cupsconfig}{root}{Order} = read_unique_directive($printer->{cupsconfig}{rootlocation}, 'Order', 'Deny,Allow'); # Widget settings # Local printers available to other machines? $printer->{cupsconfig}{localprintersshared} = localprintersshared($printer); # This machine is accepting printers shared by remote machines? $printer->{cupsconfig}{remotebroadcastsaccepted} = remotebroadcastsaccepted($printer); # To which machines are the local printers available? ($printer->{cupsconfig}{customsharingsetup}, @{$printer->{cupsconfig}{clientnetworks}}) = clientnetworks($printer); } sub write_cups_config { # Write the information edited via the printer sharing dialog into # the CUPS configuration my ($printer) = @_; # Local printers available to other machines? if ($printer->{cupsconfig}{localprintersshared}) { set_directive($printer->{cupsconfig}{cupsd_conf}, 'Browsing On'); if ($printer->{cupsconfig}{keys}{BrowseInterval} == 0) { set_directive($printer->{cupsconfig}{cupsd_conf}, 'BrowseInterval 30'); } } else { set_directive($printer->{cupsconfig}{cupsd_conf}, 'BrowseInterval 0'); } # This machine is accepting printers shared by remote machines? if ($printer->{cupsconfig}{remotebroadcastsaccepted}) { set_directive($printer->{cupsconfig}{cupsd_conf}, 'Browsing On'); if (($printer->{cupsconfig}{localprintersshared}) && ($#{$printer->{cupsconfig}{clientnetworks}} > 0) && (!$printer->{cupsconfig}{customsharingsetup})) { # If we broadcast our printers, let's accept the broadcasts # from the machines to which we broadcast set_directive($printer->{cupsconfig}{cupsd_conf}, 'BrowseDeny All'); set_directive($printer->{cupsconfig}{cupsd_conf}, 'BrowseOrder Deny,Allow'); set_directive($printer->{cupsconfig}{cupsd_conf}, 'BrowseAllow ' . join ("\nBrowseAllow ", @{$printer->{cupsconfig}{clientnetworks}})); } elsif (!remotebroadcastsaccepted($printer)) { # Use default settings if the "BrowseDeny"/"BrowseAllow" # configuration does not accept broadcasts set_directive($printer->{cupsconfig}{cupsd_conf}, 'BrowseDeny All'); set_directive($printer->{cupsconfig}{cupsd_conf}, 'BrowseOrder Deny,Allow'); set_directive($printer->{cupsconfig}{cupsd_conf}, 'BrowseOrder @LOCAL'); } } else { # Deny all broadcasts, but leave all "BrowseAllow" lines # untouched set_directive($printer->{cupsconfig}{cupsd_conf}, 'BrowseDeny All'); set_directive($printer->{cupsconfig}{cupsd_conf}, 'BrowseOrder Allow,Deny'); } # To which machines are the local printers available? if (!$printer->{cupsconfig}{customsharingsetup}) { # root location block @{$printer->{cupsconfig}{rootlocation}} = "\n" . "Order Deny,Allow\n" . "Deny From All\n" . "Allow From 127.0.0.1\n" . "Allow From " . join ("\nAllow From ", @{$printer->{cupsconfig}{clientnetworks}}) . "\n" . "\n"; my ($location_start, @location) = rip_location($printer->{cupsconfig}{cupsd_conf}, "/"); insert_location($printer->{cupsconfig}{cupsd_conf}, $location_start, @{$printer->{cupsconfig}{rootlocation}}); # "BrowseAddress" lines set_directive($printer->{cupsconfig}{cupsd_conf}, 'BrowseAddress ' . join ("\nBrowseAddress ", map {broadcastaddress($_)} @{$printer->{cupsconfig}{clientnetworks}})); } } sub clean_cups_config { # Clean $printer data structure from all settings not related to # the CUPS printer sharing dialog my ($printer) = @_; delete $printer->{cupsconfig}{keys}; delete $printer->{cupsconfig}{root}; delete $printer->{cupsconfig}{cupsd_conf}; delete $printer->{cupsconfig}{rootlocation}; } #---------------------------------------------------------------------- sub read_printers_conf { my ($printer) = @_; my $current; #- read /etc/cups/printers.conf file. #- according to this code, we are now using the following keys for each queues. #- DeviceURI > lpd://printer6/lp #- Info > Info Text #- Location > Location Text #- State > Idle|Stopped #- Accepting > Yes|No local *PRINTERS; open PRINTERS, "$::prefix/etc/cups/printers.conf" or return; local $_; while () { chomp; /^\s*#/ and next; if (/^\s*<(?:DefaultPrinter|Printer)\s+([^>]*)>/) { $current = { mode => 'cups', QUEUE => $1, } } elsif (/\s*<\/Printer>/) { $current->{QUEUE} && $current->{DeviceURI} or next; #- minimal check of synthax. add2hash($printer->{configured}{$current->{QUEUE}} ||= {}, $current); $current = undef } elsif (/\s*(\S*)\s+(.*)/) { $current->{$1} = $2 } } close PRINTERS; #- assume this printing system. $printer->{SPOOLER} ||= 'cups'; } sub get_direct_uri { #- get the local printer to access via a Device URI. my @direct_uri; local *F; open F, ($::testing ? $::prefix : "chroot $::prefix/ ") . "/usr/sbin/lpinfo -v |"; local $_; while () { /^(direct|usb|serial)\s+(\S*)/ and push @direct_uri, $2; } close F; @direct_uri; } sub ppd_entry_str { my ($mf, $descr, $lang) = @_; my ($model, $driver); if ($descr) { # Apply the beautifying rules of poll_ppd_base if ($descr =~ /Foomatic \+ Postscript/) { $descr =~ s/Foomatic \+ Postscript/PostScript/; } elsif ($descr =~ /Foomatic/) { $descr =~ s/Foomatic/GhostScript/; } elsif ($descr =~ /CUPS\+GIMP-print/) { $descr =~ s/CUPS\+GIMP-print/CUPS \+ GIMP-Print/; } elsif ($descr =~ /Series CUPS/) { $descr =~ s/Series CUPS/Series, CUPS/; } elsif ($descr !~ /(PostScript|GhostScript|CUPS|Foomatic)/i) { $descr .= ", PostScript"; } # Split model and driver $descr =~ s/\s*Series//i; $descr =~ s/\((.*?(PostScript|PS.*).*?)\)/$1/i; if (($descr =~ /^([^,]+[^,\s])\s*(\(v?\d\d\d\d\.\d\d\d\).*)$/i) || ($descr =~ /^([^,]+[^,\s])\s+(PS.*)$/i) || ($descr =~ /^([^,]+[^,\s])\s*(PostScript.*)$/i) || ($descr =~ /^([^,]+[^,\s])\s*(v\d+\.\d+.*)$/i) || ($descr =~ /^([^,]+),\s*(.+)$/)) { $model = $1; $driver = $2; $model =~ s/[\-\s,]+$//; $driver =~ s/\b(PS|PostScript\b)/PostScript/gi; $driver =~ s/(PostScript)(.*)(PostScript)/$1$2/i; $driver =~ s/^\s*(\(v?\d\d\d\d\.\d\d\d\)|v\d+\.\d+)([,\s]*)(.*)/$3$2$1/i; $driver =~ s/,\s*\(/ \(/g; $driver =~ s/[\-\s,]+$//; $driver =~ s/^[\-\s,]+//; $driver =~ s/\s+/ /g; if ($driver !~ /[a-z]/i) { $driver = "PostScript " . $driver; $driver =~ s/ $//; } } else { # Some PPDs do not have the ", " part. $model = $descr; $driver = "PostScript"; } } # Rename Canon "BJC XXXX" models into "BJC-XXXX" so that the # models do not appear twice if ($mf eq "CANON") { $model =~ s/BJC\s+/BJC-/; } # Remove manufacturer's name from the beginning of the model # name $model =~ s/^$mf[\s\-]+// if $mf; # Clean some manufacturer's names $mf =~ s/^HEWLETT[\s\-]*PACKARD/HP/i; $mf =~ s/^SEIKO[\s\-]*EPSON/EPSON/i; $mf =~ s/^KYOCERA[\s\-]*MITA/KYOCERA/i; $mf =~ s/^CITOH/C.ITOH/i; $mf =~ s/^OKI([\s\-]*DATA|)/OKIDATA/i; # Put out the resulting description string uc($mf) . '|' . $model . '|' . $driver . ($lang && " (" . lc(substr($lang, 0, 2)) . ")"); } sub get_descr_from_ppd { my ($printer) = @_; my %ppd; #- if there is no ppd, this means this is a raw queue. if (! -r "$::prefix/etc/cups/ppd/$printer->{OLD_QUEUE}.ppd") { return "|" . N("Unknown model"); } eval { local $_; foreach (cat_("$::prefix/etc/cups/ppd/$printer->{OLD_QUEUE}.ppd")) { # "OTHERS|Generic PostScript printer|PostScript (en)"; /^\*([^\s:]*)\s*:\s*\"([^\"]*)\"/ and do { $ppd{$1} = $2; next }; /^\*([^\s:]*)\s*:\s*([^\s\"]*)/ and do { $ppd{$1} = $2; next }; } }; my $descr = ($ppd{NickName} || $ppd{ShortNickName} || $ppd{ModelName}); my $make = $ppd{Manufacturer}; my $lang = $ppd{LanguageVersion}; my $entry = ppd_entry_str($make, $descr, $lang); if (!$::expert) { # Remove driver from printer list entry when in recommended mode $entry =~ s/^([^\|]+\|[^\|]+)\|.*$/$1/; } return $entry; } sub ppd_devid_data { my ($ppd) = @_; $ppd = "$::prefix/usr/share/cups/model/$ppd"; my @content; if ($ppd =~ /\.gz$/i) { @content = cat_("$::prefix/bin/zcat $ppd |") or return ("", ""); } else { @content = cat_($ppd) or return ("", ""); } my ($devidmake, $devidmodel); ($_ =~ /^\*Manufacturer:\s*\"(.*)\"\s*$/ and $devidmake = $1) foreach @content; ($_ =~ /^\*Product:\s*\"\(?(.*?)\)?\"\s*$/ and $devidmodel = $1) foreach @content; return ($devidmake, $devidmodel); } sub poll_ppd_base { #- Before trying to poll the ppd database available to cups, we have #- to make sure the file /etc/cups/ppds.dat is no more modified. #- If cups continue to modify it (because it reads the ppd files #- available), the poll_ppd_base program simply cores :-) # else cups will not be happy! and ifup lo don't run ? run_program::rooted($::prefix, "ifconfig lo 127.0.0.1"); printer::services::start_not_running_service("cups"); my $driversthere = scalar(keys %thedb); foreach (1..60) { local *PPDS; open PPDS, ($::testing ? $::prefix : "chroot $::prefix/ ") . "/usr/bin/poll_ppd_base -a |"; local $_; while () { chomp; my ($ppd, $mf, $descr, $lang) = split /\|/; if ($ppd eq "raw") { next } $ppd && $mf && $descr and do { my $key = ppd_entry_str($mf, $descr, $lang); $key =~ /^[^\|]+\|([^\|]+)\|(.*)$/; my ($model, $driver) = ($1, $2); $driver =~ s/\s+$//; if (!$::expert) { # Remove driver from printer list entry when in # recommended mode $key =~ s/^([^\|]+\|[^\|]+)\|.*$/$1/; # Only replace the printer entry when it uses a # "Foomatic + Postscript" driver next if (defined($thedb{$key}) && ($thedb{$key}{driver} !~ /PostScript/i)); # Remove the old entry delete $thedb{$key}; } elsif (defined $thedb{"$mf|$model|PostScript (recommended)"} && ($driver =~ /PostScript/i)) { # Expert mode: "Foomatic + Postscript" driver is # recommended and this is a PostScript PPD? Make # this PPD the recommended one for (keys %{$thedb{"$mf|$model|PostScript (recommended)"}}) { $thedb{"$mf|$model|PostScript"}{$_} = $thedb{"$mf|$model|PostScript (recommended)"}{$_}; } delete $thedb{"$mf|$model|PostScript (recommended)"}; $key .= " (recommended)"; } $thedb{$key}{ppd} = $ppd; $thedb{$key}{make} = $mf; $thedb{$key}{model} = $model; $thedb{$key}{driver} = $driver; # Get auto-detection data #my ($devidmake, $devidmodel) = ppd_devid_data($ppd); #$thedb{$key}{devidmake} = $devidmake; #$thedb{$key}{devidmodel} = $devidmodel; } } close PPDS; scalar(keys %thedb) - $driversthere > 5 and last; #- we have to try again running the program, wait here a little #- before. sleep 1; } #scalar(keys %descr_to_ppd) > 5 or # die "unable to connect to cups server"; } #-****************************************************************************** #- write functions #-****************************************************************************** sub configure_queue($) { my ($printer) = @_; #- Create the queue with "foomatic-configure", in case of queue #- renaming copy the old queue run_program::rooted($::prefix, "foomatic-configure", "-q", "-s", $printer->{currentqueue}{spooler}, "-n", $printer->{currentqueue}{queue}, ($printer->{currentqueue}{queue} ne $printer->{OLD_QUEUE} && $printer->{configured}{$printer->{OLD_QUEUE}} ? ("-C", $printer->{OLD_QUEUE}) : ()), "-c", $printer->{currentqueue}{connect}, ($printer->{currentqueue}{foomatic} ? ("-p", $printer->{currentqueue}{printer}, "-d", $printer->{currentqueue}{driver}) : ($printer->{currentqueue}{ppd} ? ("--ppd", ($printer->{currentqueue}{ppd} !~ m!^/! ? "/usr/share/cups/model/" : "") . $printer->{currentqueue}{ppd}) : ("-d", "raw"))), "-N", $printer->{currentqueue}{desc}, "-L", $printer->{currentqueue}{loc}, @{$printer->{currentqueue}{options}} ) or return 0;; if ($printer->{currentqueue}{ppd}) { # Add a comment line containing the path of the used PPD file to the # end of the PPD file if ($printer->{currentqueue}{ppd} ne '1') { append_to_file("$::prefix/etc/cups/ppd/$printer->{currentqueue}{queue}.ppd", "*%MDKMODELCHOICE:$printer->{currentqueue}{ppd}\n"); } } # Make sure that queue is active if ($printer->{SPOOLER} ne "pdq") { run_program::rooted($::prefix, "foomatic-printjob", "-s", $printer->{currentqueue}{spooler}, "-C", "up", $printer->{currentqueue}{queue}); } # In case of CUPS set some more useful defaults for text and image # printing if ($printer->{SPOOLER} eq "cups") { set_cups_special_options($printer->{currentqueue}{queue}); } # Check whether a USB printer is configured and activate USB printing if so my $useUSB = 0; foreach (values %{$printer->{configured}}) { $useUSB ||= (($_->{queuedata}{connect} =~ /usb/i) || ($_->{DeviceURI} =~ /usb/i)); } $useUSB ||= ($printer->{currentqueue}{connect} =~ /usb/i); if ($useUSB) { my $f = "$::prefix/etc/sysconfig/usb"; my %usb = getVarsFromSh($f); $usb{PRINTER} = "yes"; setVarsInSh($f, \%usb); } # Open permissions for device file when PDQ is chosen as spooler # so normal users can print. if ($printer->{SPOOLER} eq 'pdq') { if ($printer->{currentqueue}{connect} =~ m!^\s*(file|parallel|usb|serial):(\S*)\s*$!) { set_permissions($1, "666"); } } # Make a new printer entry in the $printer structure $printer->{configured}{$printer->{currentqueue}{queue}}{queuedata} = {}; copy_printer_params($printer->{currentqueue}, $printer->{configured}{$printer->{currentqueue}{queue}}{queuedata}); # Construct an entry line for tree view in main window of # printerdrake make_menuentry($printer, $printer->{currentqueue}{queue}); # Store the default option settings $printer->{configured}{$printer->{currentqueue}{queue}}{args} = {}; if ($printer->{currentqueue}{foomatic}) { my $tmp = $printer->{OLD_QUEUE}; $printer->{OLD_QUEUE} = $printer->{currentqueue}{queue}; $printer->{configured}{$printer->{currentqueue}{queue}}{args} = read_foomatic_options($printer); $printer->{OLD_QUEUE} = $tmp; } elsif ($printer->{currentqueue}{ppd}) { $printer->{configured}{$printer->{currentqueue}{queue}}{args} = read_cups_options($printer->{currentqueue}{queue}); } # Clean up delete($printer->{ARGS}); $printer->{OLD_CHOICE} = ""; $printer->{ARGS} = {}; $printer->{DBENTRY} = ""; $printer->{currentqueue} = {}; return 1; } sub remove_queue($$) { my ($printer) = $_[0]; my ($queue) = $_[1]; run_program::rooted($::prefix, "foomatic-configure", "-R", "-q", "-s", $printer->{SPOOLER}, "-n", $queue); # Delete old stuff from data structure delete $printer->{configured}{$queue}; delete($printer->{currentqueue}); delete($printer->{ARGS}); $printer->{OLD_CHOICE} = ""; $printer->{ARGS} = {}; $printer->{DBENTRY} = ""; $printer->{currentqueue} = {}; removeprinterfromapplications($printer, $queue); } sub restart_queue($) { my ($printer) = @_; my $queue = $printer->{QUEUE}; # Restart the daemon(s) for ($printer->{SPOOLER}) { /cups/ && do { #- restart cups. printer::services::restart("cups"); last }; /lpr|lprng/ && do { #- restart lpd. foreach ("/var/spool/lpd/$queue/lock", "/var/spool/lpd/lpd.lock") { my $pidlpd = (cat_("$::prefix$_"))[0]; kill 'TERM', $pidlpd if $pidlpd; unlink "$::prefix$_"; } printer::services::restart("lpd"); sleep 1; last }; } # Kill the jobs run_program::rooted($::prefix, "foomatic-printjob", "-R", "-s", $printer->{SPOOLER}, "-P", $queue, "-"); } sub print_pages($@) { my ($printer, @pages) = @_; my $queue = $printer->{QUEUE}; my $lpr = "/usr/bin/foomatic-printjob"; my $lpq = "$lpr -Q"; # Print the pages foreach (@pages) { my $page = $_; # Only text and PostScript can be printed directly with all spoolers, # images must be treated seperately if ($page =~ /\.jpg$/) { if ($printer->{SPOOLER} ne "cups") { # Use "convert" from ImageMagick for non-CUPS spoolers system(($::testing ? $::prefix : "chroot $::prefix/ ") . "/usr/bin/convert $page -page 427x654+100+65 PS:- | " . ($::testing ? $::prefix : "chroot $::prefix/ ") . "$lpr -s $printer->{SPOOLER} -P $queue"); } else { # Use CUPS's internal image converter with CUPS, tell it # to let the image occupy 90% of the page size (so nothing # gets cut off by unprintable borders) run_program::rooted($::prefix, $lpr, "-s", $printer->{SPOOLER}, "-P", $queue, "-o", "scaling=90", $page); } } else { run_program::rooted($::prefix, $lpr, "-s", $printer->{SPOOLER}, "-P", $queue, $page); } } sleep 5; #- allow lpr to send pages. # Check whether the job is queued local *F; open F, ($::testing ? $::prefix : "chroot $::prefix/ ") . "$lpq -s $printer->{SPOOLER} -P $queue |"; my @lpq_output = grep { !/^no entries/ && !(/^Rank\s+Owner/ .. /^\s*$/) } ; close F; @lpq_output; } sub help_output { my ($printer, $spooler) = @_; my $queue = $printer->{QUEUE}; local *F; open F, ($::testing ? $::prefix : "chroot $::prefix/ ") . sprintf($spoolers{$spooler}{help}, $queue); my $helptext = join("", ); close F; $helptext = "Option list not available!\n" if $spooler eq 'lpq' && (!$helptext || $helptext eq ""); return $helptext; } sub print_optionlist { my ($printer) = @_; my $queue = $printer->{QUEUE}; my $lpr = "/usr/bin/foomatic-printjob"; # Print the option list pages if ($printer->{configured}{$queue}{queuedata}{foomatic}) { run_program::rooted($::prefix, $lpr, "-s", $printer->{SPOOLER}, "-P", $queue, "-o", "docs", "/etc/bashrc"); } elsif ($printer->{configured}{$queue}{queuedata}{ppd}) { system(($::testing ? $::prefix : "chroot $::prefix/ ") . "/usr/bin/lphelp $queue | " . ($::testing ? $::prefix : "chroot $::prefix/ ") . "$lpr -s $printer->{SPOOLER} -P $queue"); } } # --------------------------------------------------------------- # # Spooler config stuff # # --------------------------------------------------------------- sub get_copiable_queues { my ($oldspooler, $newspooler) = @_; my @queuelist; #- here we will list all Foomatic-generated queues # Get queue list with foomatic-configure local *QUEUEOUTPUT; open QUEUEOUTPUT, ($::testing ? $::prefix : "chroot $::prefix/ ") . "foomatic-configure -Q -q -s $oldspooler |" or die "Could not run foomatic-configure"; my $entry = {}; my $inentry = 0; local $_; while () { chomp; if ($inentry) { # We are inside a queue entry if (m!^\s*\s*$!) { # entry completed $inentry = 0; if ($entry->{foomatic} && $entry->{spooler} eq $oldspooler) { # Is the connection type supported by the new # spooler? if ($newspooler eq "cups" && $entry->{connect} =~ /^(file|ptal|lpd|socket|smb|ipp):/ || $newspooler =~ /^(lpd|lprng)$/ && $entry->{connect} =~ /^(file|ptal|lpd|socket|smb|ncp|postpipe):/ || $newspooler eq "pdq" && $entry->{connect} =~ /^(file|ptal|lpd|socket):/) { push(@queuelist, $entry->{name}); } } $entry = {}; } elsif (m!^\s*(.+)\s*$!) { # queue name $entry->{name} = $1; } elsif (m!^\s*(.+)\s*$!) { # connection type (URI) $entry->{connect} = $1; } } else { if (m!^\s*\s*$!) { # new entry $inentry = 1; $entry->{foomatic} = $1; $entry->{spooler} = $2; } } } close QUEUEOUTPUT; return @queuelist; } sub copy_foomatic_queue { my ($printer, $oldqueue, $oldspooler, $newqueue) = @_; run_program::rooted($::prefix, "foomatic-configure", "-q", "-s", $printer->{SPOOLER}, "-n", $newqueue, "-C", $oldspooler, $oldqueue); # In case of CUPS set some more useful defaults for text and image printing if ($printer->{SPOOLER} eq "cups") { set_cups_special_options($newqueue); } } # ------------------------------------------------------------------ # # Stuff for non-interactive printer configuration # # ------------------------------------------------------------------ # Check whether a given URI (for example of an existing queue matches # one of the auto-detected printers sub autodetectionentry_for_uri { my ($uri, @autodetected) = @_; if ($uri =~ m!^usb://([^/]+)/([^/\?]+)(|\?serial=(\S+))$!) { # USB device with URI referring to printer model my $make = $1; my $model = $2; my $serial = $4; if ($make and $model) { $make =~ s/\%20/ /g; $model =~ s/\%20/ /g; $serial =~ s/\%20/ /g; $make =~ s/Hewlett[-\s_]Packard/HP/; $make =~ s/HEWLETT[-\s_]PACKARD/HP/; foreach my $p (@autodetected) { next if (!$p->{val}{MANUFACTURER} or ($p->{val}{MANUFACTURER} ne $make)); next if (!$p->{val}{MODEL} or ($p->{val}{MODEL} ne $model)); next if ((!$p->{val}{SERIALNUMBER} and $serial) or ($p->{val}{SERIALNUMBER} and !$serial) or ($p->{val}{SERIALNUMBER} ne $serial)); return $p; } } } elsif ($uri =~ m!^ptal:/mlc:!) { # HP multi-function device (controlled by HPOJ) my $ptaldevice = $uri; $ptaldevice =~ s!^ptal:/mlc:!!; if ($ptaldevice =~ /^par:(\d+)$/) { my $device = "/dev/lp$1"; foreach my $p (@autodetected) { next if (!$p->{port} or ($p->{port} ne $device)); return $p; } } else { $ptaldevice =~ /^usb:(.*)$/; my $model = $1; $model =~ s/_/ /g; my $device = ""; foreach my $p (@autodetected) { next if (!$p->{val}{MODEL} or ($p->{val}{MODEL} ne $model)); return $p; } } } elsif ($uri =~ m!^(socket|smb|file|parallel|usb|serial):/!) { # Local print-only device, Ethernet-(TCP/Socket)-connected printer, # or printer on Windows server my $device = $uri; $device =~ s/^(file|parallel|usb|serial)://; foreach my $p (@autodetected) { next if (!$p->{port} or ($p->{port} ne $device)); return $p; } } return undef; } # ------------------------------------------------------------------ # # Configuration of HP multi-function devices # # ------------------------------------------------------------------ sub configure_hpoj { my ($device, @autodetected) = @_; # Make the subroutines of /usr/sbin/ptal-init available # It's only necessary to read it at the first call of this subroutine, # the subroutine definitions stay valid after leaving this subroutine. if (!$ptalinitread) { local *PTALINIT; open PTALINIT, "$::prefix/usr/sbin/ptal-init" or do { die "unable to open $::prefix/usr/sbin/ptal-init"; }; my @ptalinitfunctions; # subroutine definitions in /usr/sbin/ptal-init local $_; while () { if (m!sub main!) { last; } elsif (m!^[^\#]!) { # Make the subroutines also working during installation if ($::isInstall) { s!\$::prefix!\$hpoj_prefix!g; s!prefix=\"/usr\"!prefix=\"$::prefix/usr\"!g; s!etcPtal=\"/etc/ptal\"!etcPtal=\"$::prefix/etc/ptal\"!g; s!varLock=\"/var/lock\"!varLock=\"$::prefix/var/lock\"!g; s!varRunPrefix=\"/var/run\"!varRunPrefix=\"$::prefix/var/run\"!g; } push @ptalinitfunctions, $_; } } close PTALINIT; eval "package printer::hpoj; @ptalinitfunctions sub getDevnames { return (%devnames) } sub getConfigInfo { return (%configInfo) }"; if ($::isInstall) { # Needed for photo card reader detection during installation system("ln -s $::prefix/var/run/ptal-mlcd /var/run/ptal-mlcd"); system("ln -s $::prefix/etc/ptal /etc/ptal"); } $ptalinitread = 1; } # Read the HPOJ config file and check whether this device is already # configured printer::hpoj::setupVariables(); printer::hpoj::readDeviceInfo(); $device =~ m!^/dev/\S*lp(\d+)$! or $device =~ m!^/dev/printers/(\d+)$! or $device =~ m!^socket://([^:]+)$! or $device =~ m!^socket://([^:]+):(\d+)$!; my $model = $1; my ($model_long, $serialnumber, $serialnumber_long) = ("", "", ""); my $cardreader = 0; my $device_ok = 1; my $bus; my $address_arg = ""; my $base_address = ""; my $hostname = ""; my $port = $2; if ($device =~ /usb/) { $bus = "usb"; } elsif ($device =~ /par/ || $device =~ /\/dev\/lp/ || $device =~ /printers/) { $bus = "par"; $address_arg = printer::detect::parport_addr($device); $address_arg =~ /^\s*-base\s+(\S+)/; eval "$base_address = $1"; } elsif ($device =~ /socket/) { $bus = "hpjd"; $hostname = $model; return "" if $port && ($port < 9100 || $port > 9103); if ($port && $port != 9100) { $port -= 9100; $hostname .= ":$port"; } } else { return ""; } my $devdata; foreach (@autodetected) { $device eq $_->{port} or next; $devdata = $_; # $model is for the PTAL device name, so make sure that it is unique # so in the case of the model name auto-detection having failed leave # the port number or the host name as model name. my $searchunknown = N("Unknown model"); if ($_->{val}{MODEL} && $_->{val}{MODEL} !~ /$searchunknown/i && $_->{val}{MODEL} !~ /^\s*$/) { $model = $_->{val}{MODEL}; } $serialnumber = $_->{val}{SERIALNUMBER}; # Check if the device is really an HP multi-function device if ($bus ne "hpjd") { # Start ptal-mlcd daemon for locally connected devices services::stop("hpoj"); run_program::rooted($::prefix, "ptal-mlcd", "$bus:probe", "-device", $device, split(' ',$address_arg)); } $device_ok = 0; my $ptalprobedevice = $bus eq "hpjd" ? "hpjd:$hostname" : "mlc:$bus:probe"; local *F; if (open F, ($::testing ? $::prefix : "chroot $::prefix/ ") . "/usr/bin/ptal-devid $ptalprobedevice |") { my $devid = join("", ); close F; if ($devid) { $device_ok = 1; local *F; if (open F, ($::testing ? $::prefix : "chroot $::prefix/ ") . "/usr/bin/ptal-devid $ptalprobedevice -long -mdl 2>/dev/null |") { $model_long = join("", ); close F; chomp $model_long; # If SNMP or local port auto-detection failed but HPOJ # auto-detection succeeded, fill in model name here. if (!$_->{val}{MODEL} || $_->{val}{MODEL} =~ /$searchunknown/i || $_->{val}{MODEL} =~ /^\s*$/) { if ($model_long =~ /:([^:;]+);/) { $_->{val}{MODEL} = $1; } } } if (open F, ($::testing ? $::prefix : "chroot $::prefix/ ") . "/usr/bin/ptal-devid $ptalprobedevice -long -sern 2>/dev/null |") { #-# $serialnumber_long = join("", ); close F; chomp $serialnumber_long; } $cardreader = 1 if printer::hpoj::cardReaderDetected($ptalprobedevice); } } if ($bus ne "hpjd") { # Stop ptal-mlcd daemon for locally connected devices local *F; if (open F, ($::testing ? $::prefix : "chroot $::prefix/ ") . "ps auxwww | grep \"ptal-mlcd $bus:probe\" | grep -v grep | ") { my $line = ; if ($line =~ /^\s*\S+\s+(\d+)\s+/) { my $pid = $1; kill 15, $pid; } close F; } printer::services::start("hpoj"); } last; } # No, it is not an HP multi-function device. return "" if !$device_ok; # Determine the ptal device name from already existing config files my $ptalprefix = ($bus eq "hpjd" ? "hpjd:" : "mlc:$bus:"); my $ptaldevice = printer::hpoj::lookupDevname($ptalprefix, $model_long, $serialnumber_long, $base_address); # It's all done for us, the device is already configured return $ptaldevice if defined($ptaldevice); # Determine the ptal name for a new device if ($bus eq "hpjd") { $ptaldevice = "hpjd:$hostname"; } else { $ptaldevice = $model; $ptaldevice =~ s![\s/]+!_!g; $ptaldevice = "mlc:$bus:$ptaldevice"; } # Delete any old/conflicting devices printer::hpoj::deleteDevice($ptaldevice); if ($bus eq "par") { while (1) { my $oldDevname = printer::hpoj::lookupDevname("mlc:par:",undef,undef,$base_address); last unless defined($oldDevname); printer::hpoj::deleteDevice($oldDevname); } } # Configure the device # Open configuration file local *CONFIG; open(CONFIG, "> $::prefix/etc/ptal/$ptaldevice") or die "Could not open /etc/ptal/$ptaldevice for writing!\n"; # Write file header. my $date = chomp_(`date`); print CONFIG "# Added $date by \"printerdrake\".\n" . "\n" . "# The basic format for this file is \"key[+]=value\".\n" . "# If you say \"+=\" instead of \"=\", then the value is appended to any\n" . "# value already defined for this key, rather than replacing it.\n" . "\n" . "# Comments must start at the beginning of the line. Otherwise, they may\n" . "# be interpreted as being part of the value.\n" . "\n" . "# If you have multiple devices and want to define options that apply to\n" . "# all of them, then put them in the file /etc/ptal/defaults, which is read\n" . "# in before this file.\n" . "\n" . "# The format version of this file:\n" . "# ptal-init ignores devices with incorrect/missing versions.\n" . "init.version=1\n"; # Write model string. if ($model_long !~ /\S/) { print CONFIG "\n" . "# \"printerdrake\" couldn't read the model but added this device anyway:\n" . "# "; } else { print CONFIG "\n" . "# The device model that was originally detected on this port:\n" . "# If this ever changes, then you should re-run \"printerdrake\"\n" . "# to delete and re-configure this device.\n"; if ($bus eq "par") { print CONFIG "# Comment out if you don't care what model is really connected to this\n" . "# parallel port.\n"; } } print CONFIG "init.mlcd.append+=-devidmatch \"$model_long\"\n"; # Write serial-number string. if ($serialnumber_long !~ /\S/) { print CONFIG "\n" . "# The device's serial number is unknown.\n" . "# "; } else { print CONFIG "\n" . "# The serial number of the device that was originally detected on this port:\n"; if ($bus =~ /^[pu]/) { print CONFIG "# Comment out if you want to disable serial-number matching.\n"; } } print CONFIG "init.mlcd.append+=-devidmatch \"$serialnumber_long\"\n"; if ($bus =~ /^[pu]/) { print CONFIG "\n" . "# Standard options passed to ptal-mlcd:\n" . "init.mlcd.append+="; if ($bus eq "usb") { # Important: don't put more quotes around /dev/usb/lp[0-9]*, # because ptal-mlcd currently does no globbing: print CONFIG "-device /dev/usb/lp[0-9]*"; } elsif ($bus eq "par") { print CONFIG "$address_arg -device $device"; } print CONFIG "\n" . "\n" . "# ptal-mlcd's remote console can be useful for debugging, but may be a\n" . "# security/DoS risk otherwise. In any case, it's accessible with the\n" . "# command \"ptal-connect mlc:: -service PTAL-MLCD-CONSOLE\".\n" . "# Uncomment the following line if you want to enable this feature for\n" . "# this device:\n" . "# init.mlcd.append+=-remconsole\n" . "\n" . "# If you need to pass any other command-line options to ptal-mlcd, then\n" . "# add them to the following line and uncomment the line:\n" . "# init.mlcd.append+=\n" . "\n" . "# By default ptal-printd is started for mlc: devices. If you use CUPS,\n" . "# then you may not be able to use ptal-printd, and you can uncomment the\n" . "# following line to disable ptal-printd for this device:\n" . "# init.printd.start=0\n"; } else { print CONFIG "\n" . "# By default ptal-printd isn't started for hpjd: devices.\n" . "# If for some reason you want to start it for this device, then\n" . "# uncomment the following line:\n" . "init.printd.start=1\n"; } print CONFIG "\n" . "# If you need to pass any additional command-line options to ptal-printd,\n" . "# then add them to the following line and uncomment the line:\n" . "# init.printd.append+=\n"; if ($cardreader) { print CONFIG "\n" . "# Uncomment the following line to enable ptal-photod for this device:\n" . "init.photod.start=1\n" . "\n" . "# If you have more than one photo-card-capable peripheral and you want to\n" . "# assign particular TCP port numbers and mtools drive letters to each one,\n" . "# then change the line below to use the \"-portoffset \" option.\n" . "init.photod.append+=-maxaltports 26\n"; } close(CONFIG); printer::hpoj::readOneDevice($ptaldevice); # Restart HPOJ printer::services::restart("hpoj"); # Return HPOJ device name to form the URI return $ptaldevice; } sub config_sane { # Add HPOJ backend to /etc/sane.d/dll.conf if needed (no individual # config file /etc/sane.d/hpoj.conf necessary, the HPOJ driver finds the # scanner automatically) return if member("hpoj", chomp_(cat_("$::prefix/etc/sane.d/dll.conf"))); eval { append_to_file("$::prefix/etc/sane.d/dll.conf", "hpoj\n") } or die "can't write SANE config in /etc/sane.d/dll.conf: $!"; } sub config_photocard { # Add definitions for the drives p:. q:, r:, and s: to /etc/mtools.conf cat_("$::prefix/etc/mtools.conf") !~ m/^\s*drive\s+p:/m or return; append_to_file("$::prefix/etc/mtools.conf", <<'EOF'); # Drive definitions added for the photo card readers in HP multi-function # devices driven by HPOJ drive p: file=":0" remote drive q: file=":1" remote drive r: file=":2" remote drive s: file=":3" remote # This turns off some file system integrity checks of mtools, it is needed # for some photo cards. mtools_skip_check=1 EOF # Generate a config file for the graphical mtools frontend MToolsFM or # modify the existing one my $mtoolsfmconf; if (-f "$::prefix/etc/mtoolsfm.conf") { $mtoolsfmconf = cat_("$::prefix/etc/mtoolsfm.conf") or die "can't read MToolsFM config in $::prefix/etc/mtoolsfm.conf: $!"; $mtoolsfmconf =~ m/^\s*DRIVES\s*=\s*\"([A-Za-z ]*)\"/m; my $alloweddrives = lc($1); foreach my $letter ("p", "q", "r", "s") { $alloweddrives .= $letter if $alloweddrives !~ /$letter/; } $mtoolsfmconf =~ s/^\s*DRIVES\s*=\s*\"[A-Za-z ]*\"/DRIVES=\"$alloweddrives\"/m; $mtoolsfmconf =~ s/^\s*LEFTDRIVE\s*=\s*\"[^\"]*\"/LEFTDRIVE=\"p\"/m; } else { $mtoolsfmconf = <<'EOF'; # MToolsFM config file. comments start with a hash sign. # # This variable sets the allowed driveletters (all lowercase). Example: # DRIVES="ab" DRIVES="apqrs" # # This variable sets the driveletter upon startup in the left window. # An empty string or space is for the hardisk. Example: # LEFTDRIVE="a" LEFTDRIVE="p" # # This variable sets the driveletter upon startup in the right window. # An empty string or space is for the hardisk. Example: # RIGHTDRIVE="a" RIGHTDRIVE=" " EOF } output("$::prefix/etc/mtoolsfm.conf", $mtoolsfmconf); } # ------------------------------------------------------------------ # # Configuration of printers in applications # # ------------------------------------------------------------------ sub configureapplications { my ($printer) = @_; setcupslink($printer); printer::office::configureoffice('Star Office', $printer); printer::office::configureoffice('OpenOffice.Org', $printer); printer::gimp::configure($printer); } sub addcupsremotetoapplications { my ($printer, $queue) = @_; setcupslink($printer); return printer::office::add_cups_remote_to_office('Star Office', $printer, $queue) && printer::office::add_cups_remote_to_office('OpenOffice.Org', $printer, $queue) && printer::gimp::addcupsremoteto($printer, $queue); } sub removeprinterfromapplications { my ($printer, $queue) = @_; setcupslink($printer); return printer::office::remove_printer_from_office('Star Office', $printer, $queue) && printer::office::remove_printer_from_office('OpenOffice.Org', $printer, $queue) && printer::gimp::removeprinterfrom($printer, $queue); } sub removelocalprintersfromapplications { my ($printer) = @_; setcupslink($printer); printer::office::remove_local_printers_from_office('Star Office', $printer); printer::office::remove_local_printers_from_office('OpenOffice.Org', $printer); printer::gimp::removelocalprintersfrom($printer); } sub setcupslink { my ($printer) = @_; return 1 if !$::isInstall || $printer->{SPOOLER} ne "cups" || -d "/etc/cups/ppd"; system("ln -sf $::prefix/etc/cups /etc/cups"); return 1; } 1;