package install_steps_interactive; # $Id$ use diagnostics; use strict; use vars qw(@ISA $new_bootstrap $com_license); @ISA = qw(install_steps); $com_license = _(" Warning Please read carefully the terms below. If you disagree with any portion, you are not allowed to install the next CD media. Press 'Refuse' to continue the installation without using these media. Some components contained in the next CD media are not governed by the GPL License or similar agreements. Each such component is then governed by the terms and conditions of its own specific license. Please read carefully and comply with such specific licenses before you use or redistribute the said components. Such licenses will in general prevent the transfer, duplication (except for backup purposes), redistribution, reverse engineering, de-assembly, de-compilation or modification of the component. Any breach of agreement will immediately terminate your rights under the specific license. Unless the specific license terms grant you such rights, you usually cannot install the programs on more than one system, or adapt it to be used on a network. In doubt, please contact directly the distributor or editor of the component. Transfer to third parties or copying of such components including the documentation is usually forbidden. All rights to the components of the next CD media belong to their respective authors and are protected by intellectual property and copyright laws applicable to software programs. "); #-###################################################################################### #- misc imports #-###################################################################################### use common; use partition_table qw(:types); use partition_table_raw; use install_steps; use install_interactive; use install_any; use detect_devices; use run_program; use devices; use fsedit; use loopback; use mouse; use modules; use lang; use keyboard; use any; use fs; use log; #-###################################################################################### #- In/Out Steps Functions #-###################################################################################### sub errorInStep($$) { my ($o, $err) = @_; $o->ask_warn(_("Error"), [ _("An error occurred"), common::formatError($err) ]); } sub kill_action { my ($o) = @_; $o->kill; } sub charsetChanged {} #-###################################################################################### #- Steps Functions #-###################################################################################### #------------------------------------------------------------------------------ sub selectLanguage { my ($o) = @_; $o->{lang} = any::selectLanguage($o, $o->{lang}, $o->{langs} ||= {}); install_steps::selectLanguage($o); $o->charsetChanged; $o->ask_warn('', formatAlaTeX( "If you see this message it is because you choose a language for which DrakX does not include a translation yet; however the fact that it is listed means there is some support for it anyway. That is, once GNU/Linux will be installed, you will be able to at least read and write in that language; and possibly more (various fonts, spell checkers, various programs translated etc. that varies from language to language).")) if $o->{lang} !~ /^en/ && !lang::load_mo(); unless ($o->{useless_thing_accepted}) { $o->set_help('license'); $o->{useless_thing_accepted} = $o->ask_from_list_(_("License agreement"), formatAlaTeX( _("Introduction The operating system and the different components available in the Mandrake Linux distribution shall be called the \"Software Products\" hereafter. The Software Products include, but are not restricted to, the set of programs, methods, rules and documentation related to the operating system and the different components of the Mandrake Linux distribution. 1. License Agreement Please read carefully this document. This document is a license agreement between you and MandrakeSoft S.A. which applies to the Software Products. By installing, duplicating or using the Software Products in any manner, you explicitly accept and fully agree to conform to the terms and conditions of this License. If you disagree with any portion of the License, you are not allowed to install, duplicate or use the Software Products. Any attempt to install, duplicate or use the Software Products in a manner which does not comply with the terms and conditions of this License is void and will terminate your rights under this License. Upon termination of the License, you must immediately destroy all copies of the Software Products. 2. Limited Warranty The Software Products and attached documentation are provided \"as is\", with no warranty, to the extent permitted by law. MandrakeSoft S.A. will, in no circumstances and to the extent permitted by law, be liable for any special, incidental, direct or indirect damages whatsoever (including without limitation damages for loss of business, interruption of business, financial loss, legal fees and penalties resulting from a court judgment, or any other consequential loss) arising out of the use or inability to use the Software Products, even if MandrakeSoft S.A. has been advised of the possibility or occurance of such damages. LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME COUNTRIES To the extent permitted by law, MandrakeSoft S.A. or its distributors will, in no circumstances, be liable for any special, incidental, direct or indirect damages whatsoever (including without limitation damages for loss of business, interruption of business, financial loss, legal fees and penalties resulting from a court judgment, or any other consequential loss) arising out of the possession and use of software components or arising out of downloading software components from one of Mandrake Linux sites which are prohibited or restricted in some countries by local laws. This limited liability applies to, but is not restricted to, the strong cryptography components included in the Software Products. 3. The GPL License and Related Licenses The Software Products consist of components created by different persons or entities. Most of these components are governed under the terms and conditions of the GNU General Public Licence, hereafter called \"GPL\", or of similar licenses. Most of these licenses allow you to use, duplicate, adapt or redistribute the components which they cover. Please read carefully the terms and conditions of the license agreement for each component before using any component. Any question on a component license should be addressed to the component author and not to MandrakeSoft. The programs developed by MandrakeSoft S.A. are governed by the GPL License. Documentation written by MandrakeSoft S.A. is governed by a specific license. Please refer to the documentation for further details. 4. Intellectual Property Rights All rights to the components of the Software Products belong to their respective authors and are protected by intellectual property and copyright laws applicable to software programs. MandrakeSoft S.A. reserves its rights to modify or adapt the Software Products, as a whole or in parts, by all means and for all purposes. \"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of MandrakeSoft S.A. 5. Governing Laws If any portion of this agreement is held void, illegal or inapplicable by a court judgment, this portion is excluded from this contract. You remain bound by the other applicable sections of the agreement. The terms and conditions of this License are governed by the Laws of France. All disputes on the terms of this license will preferably be settled out of court. As a last resort, the dispute will be referred to the appropriate Courts of Law of Paris - France. For any question on this document, please contact MandrakeSoft S.A. ")), [ __("Accept"), __("Refuse") ], "Refuse") eq "Accept" or $o->exit; } } #------------------------------------------------------------------------------ sub selectKeyboard { my ($o, $clicked) = @_; my $l = keyboard::lang2keyboards($o->{lang}); #- good guess, don't ask return install_steps::selectKeyboard($o) if !$::expert && !$clicked && $l->[0][1] >= 90; my @best = map { $_->[0] } @$l; push @best, 'us_intl' if !member('us_intl', @best); my $format = sub { translate(keyboard::keyboard2text($_[0])) }; my $other; my $ext_keyboard = $o->{keyboard}; $o->ask_from_( { title => _("Keyboard"), messages => _("Please choose your keyboard layout."), advanced_messages => _("Here is the full list of keyboards available"), advanced_label => _("More"), callbacks => { changed => sub { $other = $_[0]==1 } }, }, [ if_(@best > 1, { val => \$o->{keyboard}, type => 'list', format => $format, list => [ @best ] }), { val => \$ext_keyboard, type => 'list', format => $format, list => [ keyboard::keyboards ], advanced => @best > 1 } ]); delete $o->{keyboard_unsafe}; $o->{keyboard} = $ext_keyboard if $other; install_steps::selectKeyboard($o); } #------------------------------------------------------------------------------ sub selectInstallClass1 { my ($o, $verif, $l, $def, $l2, $def2) = @_; $verif->($o->ask_from_list(_("Install Class"), _("Which installation class do you want?"), $l, $def) || die 'already displayed'); $::live ? 'Update' : $o->ask_from_list_(_("Install/Update"), _("Is this an install or an update?"), $l2, $def2); } #------------------------------------------------------------------------------ sub selectInstallClass { my ($o, $clicked) = @_; my %c = my @c = ( if_(!$::corporate, _("Recommended") => "beginner", ), if_($o->{meta_class} ne 'desktop', _("Expert") => "expert", ), ); %c = @c = (_("Expert") => "expert") if $::expert && !$clicked; $o->set_help('selectInstallClassCorpo') if $::corporate; my $verifInstallClass = sub { $::expert = $c{$_[0]} eq "expert" }; $o->{isUpgrade} = $o->selectInstallClass1($verifInstallClass, first(list2kv(@c)), ${{reverse %c}}{$::expert ? "expert" : "beginner"}, [ __("Install"), __("Update") ], $o->{isUpgrade} ? "Update" : "Install") eq "Update"; install_steps::selectInstallClass($o); } #------------------------------------------------------------------------------ sub selectMouse { my ($o, $force) = @_; $force ||= $o->{mouse}{unsafe} || $::expert; my $prev = $o->{mouse}{type} . '|' . $o->{mouse}{name}; $o->{mouse} = mouse::fullname2mouse( $o->ask_from_treelist_('', _("Please choose the type of your mouse."), '|', [ mouse::fullnames ], $prev) || return) if $force; if ($force && $o->{mouse}{type} eq 'serial') { $o->set_help('selectSerialPort'); $o->{mouse}{device} = $o->ask_from_listf(_("Mouse Port"), _("Please choose on which serial port your mouse is connected to."), \&mouse::serial_port2text, [ mouse::serial_ports ]) or return; } if (arch() =~ /ppc/ && $o->{mouse}{nbuttons} == 1) { #- set a sane default F11/F12 $o->{mouse}{button2_key} = 87; $o->{mouse}{button3_key} = 88; $o->ask_from('', _("Buttons emulation"), [ { label => _("Button 2 Emulation"), val => \$o->{mouse}{button2_key}, list => [ mouse::ppc_one_button_keys() ], format => \&mouse::ppc_one_button_key2text }, { label => _("Button 3 Emulation"), val => \$o->{mouse}{button3_key}, list => [ mouse::ppc_one_button_keys() ], format => \&mouse::ppc_one_button_key2text }, ]) or return; } if ($o->{mouse}{device} eq "usbmouse") { any::setup_thiskind($o, 'usb', !$::expert, 1, $o->{pcmcia}); eval { devices::make("usbmouse"); modules::load($_) foreach qw(hid mousedev usbmouse); }; } $o->SUPER::selectMouse; 1; } #------------------------------------------------------------------------------ sub setupSCSI { my ($o, $clicked) = @_; if (!$::noauto && arch() =~ /i.86/) { if ($o->{pcmcia} ||= !$::testing && c::pcmcia_probe()) { my $w = $o->wait_message(_("PCMCIA"), _("Configuring PCMCIA cards...")); my $results = modules::configure_pcmcia($o->{pcmcia}); $w = undef; $results and $o->ask_warn('', $results); } } { my $w = $o->wait_message(_("IDE"), _("Configuring IDE")); modules::load_ide(); } any::setup_thiskind($o, 'scsi|disk', !$::expert && !$clicked, $clicked, $o->{pcmcia}); install_interactive::tellAboutProprietaryModules($o) if !$clicked; } sub ask_mntpoint_s { my ($o, $fstab) = @_; $o->set_help('ask_mntpoint_s'); my @fstab = grep { isTrueFS($_) } @$fstab; @fstab = grep { isSwap($_) } @$fstab if @fstab == 0; @fstab = @$fstab if @fstab == 0; die _("no available partitions") if @fstab == 0; { my $w = $o->wait_message('', _("Scanning partitions to find mount points")); install_any::suggest_mount_points($fstab, $o->{prefix}, 'uniq'); log::l("default mntpoint $_->{mntpoint} $_->{device}") foreach @fstab; } if (@fstab == 1) { $fstab[0]{mntpoint} = '/'; } else { $o->ask_from('', _("Choose the mount points"), [ map { { label => partition_table::description($_), val => \$_->{mntpoint}, not_edit => 0, list => [ '', fsedit::suggestions_mntpoint(fsedit::empty_all_hds()) ] } } grep { !$_->{real_mntpoint} || common::usingRamdisk() } @fstab ]) or return; } $o->SUPER::ask_mntpoint_s($fstab); } #------------------------------------------------------------------------------ sub doPartitionDisks { my ($o) = @_; my $warned; install_any::getHds($o, sub { my ($err) = @_; $warned = 1; if ($o->ask_yesorno(_("Error"), _("I can't read your partition table, it's too corrupted for me :( I can try to go on blanking bad partitions (ALL DATA will be lost!). The other solution is to disallow DrakX to modify the partition table. (the error is %s) Do you agree to loose all the partitions? ", $err))) { 0; } else { $o->{partitioning}{readonly} = 1; 1; } }) or $warned or $o->ask_warn('', _("DiskDrake failed to read correctly the partition table. Continue at your own risk!")); if (arch() =~ /ppc/ && detect_devices::get_mac_generation =~ /NewWorld/) { #- need to make bootstrap part if NewWorld machine - thx Pixel ;^) if (defined $partition_table_mac::bootstrap_part) { #- don't do anything if we've got the bootstrap setup #- otherwise, go ahead and create one somewhere in the drive free space } else { if (defined $partition_table_mac::freepart_start && $partition_table_mac::freepart_size >= 1) { my ($hd) = $partition_table_mac::freepart_device; log::l("creating bootstrap partition on drive /dev/$hd->{device}, block $partition_table_mac::freepart_start"); $partition_table_mac::bootstrap_part = $partition_table_mac::freepart_part; log::l("bootstrap now at $partition_table_mac::bootstrap_part"); fsedit::add($hd, { start => $partition_table_mac::freepart_start, size => 1 << 11, type => 0x401, mntpoint => '' }, $o->{all_hds}, { force => 1, primaryOrExtended => 'Primary' }); $new_bootstrap = 1; } else { $o->ask_warn('',_("No free space for 1MB bootstrap! Install will continue, but to boot your system, you'll need to create the bootstrap partition in DiskDrake")); } } } if ($o->{isUpgrade}) { # either one root is defined (and all is ok), or we take the first one we find my $p = fsedit::get_root_($o->{fstab}); if (!$p) { my @l = install_any::find_root_parts($o->{fstab}, $o->{prefix}) or die _("No root partition found to perform an upgrade"); $p = $o->ask_from_listf(_("Root Partition"), _("What is the root partition (/) of your system?"), \&partition_table::description, \@l) or die "setstep exitInstall\n"; } install_any::use_root_part($o->{fstab}, $p, $o->{prefix}); } elsif ($::expert && $o->isa('interactive_gtk')) { install_interactive::partition_with_diskdrake($o, $o->{all_hds}); } else { install_interactive::partitionWizard($o); } } #------------------------------------------------------------------------------ sub rebootNeeded { my ($o) = @_; $o->ask_warn('', _("You need to reboot for the partition table modifications to take place")); install_steps::rebootNeeded($o); } #------------------------------------------------------------------------------ sub choosePartitionsToFormat { my ($o, $fstab) = @_; $o->SUPER::choosePartitionsToFormat($fstab); my @l = grep { !$_->{isMounted} && $_->{mntpoint} && (!isSwap($_) || $::expert) && (!isFat($_) || $_->{notFormatted} || $::expert) && (!isOtherAvailableFS($_) || $::expert || $_->{toFormat}) } @$fstab; $_->{toFormat} = 1 foreach grep { isSwap($_) && !$::expert } @$fstab; return if @l == 0 || !$::expert && 0 == grep { ! $_->{toFormat} } @l; #- keep it temporary until the guy has accepted $_->{toFormatTmp} = $_->{toFormat} || $_->{toFormatUnsure} foreach @l; $o->ask_from_( { messages => _("Choose the partitions you want to format"), advanced_messages => _("Check bad blocks?"), }, [ map { my $e = $_; ({ text => partition_table::description($e), type => 'bool', val => \$e->{toFormatTmp} }, if_(!isLoopback($_) && !isThisFs("reiserfs", $_) && !isThisFs("xfs", $_) && !isThisFs("jfs", $_), { text => partition_table::description($e), type => 'bool', advanced => 1, disabled => sub { !$e->{toFormatTmp} }, val => \$e->{toFormatCheck} })) } @l ] ) or die 'already displayed'; #- ok now we can really set toFormat foreach (@l) { $_->{toFormat} = delete $_->{toFormatTmp}; $_->{isFormatted} = 0; } } sub formatMountPartitions { my ($o, $fstab) = @_; my $w; fs::formatMount_all($o->{all_hds}{raids}, $o->{fstab}, $o->{prefix}, sub { my ($part) = @_; $w ||= $o->wait_message('', _("Formatting partitions")); $w->set(isLoopback($part) ? _("Creating and formatting file %s", $part->{loopback_file}) : _("Formatting partition %s", $part->{device})); }); die _("Not enough swap to fulfill installation, please add some") if availableMemory < 40 * 1024; } #------------------------------------------------------------------------------ sub setPackages { my ($o) = @_; my $w = $o->wait_message('', _("Looking for available packages")); $o->SUPER::setPackages; } #------------------------------------------------------------------------------ sub selectPackagesToUpgrade { my ($o) = @_; my $w = $o->wait_message('', _("Finding packages to upgrade")); $o->SUPER::selectPackagesToUpgrade(); } #------------------------------------------------------------------------------ sub choosePackages { my ($o, $packages, $compssUsers, $first_time) = @_; #- this is done at the very beginning to take into account #- selection of CD by user if using a cdrom. $o->chooseCD($packages) if $o->{method} eq 'cdrom' && !$::oem; my $availableC = install_steps::choosePackages(@_); my $individual = $::expert; require pkgs; my $min_size = pkgs::selectedSize($packages); $min_size < $availableC or die _("Your system has not enough space left for installation or upgrade (%d > %d)", $min_size, $availableC); my $min_mark = $::expert ? 3 : 4; my $def_mark = 4; #-TODO: was 59, 59 is for packages that need gl hw acceleration. my $b = pkgs::saveSelected($packages); pkgs::setSelectedFromCompssList($packages, $o->{compssUsersChoice}, $def_mark, 0); my $def_size = pkgs::selectedSize($packages) + 1; #- avoid division by zero. my $level = pkgs::setSelectedFromCompssList($packages, { map { $_ => 1 } map { @{$compssUsers->{$_}{flags}} } @{$o->{compssUsersSorted}} }, $min_mark, 0); my $max_size = pkgs::selectedSize($packages) + 1; #- avoid division by zero. pkgs::restoreSelected($b); $o->chooseGroups($packages, $compssUsers, $min_mark, \$individual, $max_size) if !$::corporate; my $size2install = min($availableC, do { my $max = round_up(min($max_size, $availableC) / sqr(1024), 100); if (1) { my (@l); my @text = (__("Minimum (%dMB)"), __("Recommended (%dMB)"), __("Complete (%dMB)")); if ($o->{meta_class} eq 'desktop') { @l = (300, 500, 800, 0); $max > $l[2] or splice(@l, 2, 1); $max > $l[1] or splice(@l, 1, 1); $max > $l[0] or @l = $max; $text[$#l] = __("Custom"); } else { @l = (300, 700, $max); $l[2] > $l[1] + 200 or splice(@l, 1, 1); #- not worth proposing too alike stuff $l[1] > $l[0] + 100 or splice(@l, 0, 1); } $o->set_help('empty'); # $o->ask_from_listf('', _("Select the size you want to install"), # sub { _ ($text[$_[0]], $_[0]) }, \@l, $l[1]) * sqr(1024); $max * sqr(1024); } else { $o->chooseSizeToInstall($packages, $min_size, $def_size, $max_size, $availableC, $individual) || goto &choosePackages; } }); if (!$size2install) { #- special case for desktop $o->chooseGroups($packages, $compssUsers, $min_mark) or goto &choosePackages; $size2install = $availableC; } ($o->{packages_}{ind}) = pkgs::setSelectedFromCompssList($packages, $o->{compssUsersChoice}, $min_mark, $size2install); $o->choosePackagesTree($packages) if $individual; install_any::warnAboutNaughtyServers($o); } sub chooseSizeToInstall { my ($o, $packages, $min, $def, $max, $availableC) = @_; min($def, $availableC * 0.7); } sub choosePackagesTree { my ($o, $packages, $limit_to_medium) = @_; $o->ask_many_from_list('', _("Choose the packages you want to install"), { list => [ map { pkgs::packageByName($packages, $_) } $limit_to_medium ? (grep { pkgs::packageMedium($packages, $_) == $limit_to_medium } keys %{$packages->{names}}) : (keys %{$packages->{names}}) ], value => \&pkgs::packageFlagSelected, label => \&pkgs::packageName, sort => 1, }); } sub loadSavePackagesOnFloppy { my ($o, $packages) = @_; my $choice = $o->ask_from_listf('', _("Please choose load or save package selection on floppy. The format is the same as auto_install generated floppies."), sub { translate($_[0]{text}) }, [ { text => _("Load from floppy"), code => sub { while (1) { my $w = $o->wait_message(_("Package selection"), _("Loading from floppy")); log::l("load package selection from floppy"); my $O = eval { install_any::loadO({}, 'floppy') }; if ($@) { $w = undef; #- close wait message. $o->ask_okcancel('', _("Insert a floppy containing package selection")) or return; } else { install_any::unselectMostPackages($o); foreach (@{$O->{default_packages} || []}) { my $pkg = pkgs::packageByName($packages, $_); pkgs::selectPackage($packages, $pkg) if $pkg; } return 1; } } } }, { text => _("Save on floppy"), code => sub { log::l("save package selection to floppy"); install_any::g_default_packages($o, 'quiet'); } }, ]); $choice->{code} and $choice->{code}(); } sub chooseGroups { my ($o, $packages, $compssUsers, $min_level, $individual, $max_size) = @_; my $b = pkgs::saveSelected($packages); install_any::unselectMostPackages($o); pkgs::setSelectedFromCompssList($packages, {}, $min_level, $max_size); my $system_size = pkgs::selectedSize($packages); my ($sizes, $pkgs) = pkgs::computeGroupSize($packages, $min_level); pkgs::restoreSelected($b); log::l("system_size: $system_size"); my @groups = @{$o->{compssUsersSorted}}; my %stable_flags = grep_each { $::b } %{$o->{compssUsersChoice}}; delete $stable_flags{$_} foreach map { @{$compssUsers->{$_}{flags}} } @groups; my $compute_size = sub { my %pkgs; my %flags = %stable_flags; @flags{@_} = (); my $total_size; A: while (my ($k, $size) = each %$sizes) { Or: foreach (split "\t", $k) { foreach (split "&&") { exists $flags{$_} or next Or; } $total_size += $size; $pkgs{$_} = 1 foreach @{$pkgs->{$k}}; next A; } } log::l("computed size $total_size"); log::l("chooseGroups: ", join(" ", sort keys %pkgs)); int $total_size; }; my %val = map { $_ => ! grep { ! $o->{compssUsersChoice}{$_} } @{$compssUsers->{$_}{flags}} } @groups; # @groups = grep { $size{$_} = round_down($size{$_} / sqr(1024), 10) } @groups; #- don't display the empty or small one (eg: because all packages are below $min_level) my ($all, $size); my $available_size = install_any::getAvailableSpace($o) / sqr(1024); my $size_to_display = sub { my $lsize = $system_size + $compute_size->(map { @{$compssUsers->{$_}{flags}} } grep { $val{$_} } @groups); #- if a profile is deselected, deselect everything (easier than deselecting the profile packages) $size > $lsize and install_any::unselectMostPackages($o); $size = $lsize; _("Total size: %d / %d MB", pkgs::correctSize($size / sqr(1024)), $available_size); }; while (1) { $o->reallyChooseGroups($size_to_display, $individual, \%val) or return; last if pkgs::correctSize($size / sqr(1024)) < $available_size; $o->ask_warn('', _("Selected size is larger than available space")); } $o->{compssUsersChoice}{$_} = 0 foreach map { @{$compssUsers->{$_}{flags}} } grep { !$val{$_} } keys %val; $o->{compssUsersChoice}{$_} = 1 foreach map { @{$compssUsers->{$_}{flags}} } grep { $val{$_} } keys %val; 1; } sub reallyChooseGroups { my ($o, $size_to_display, $individual, $val) = @_; my $size_text = &$size_to_display; my ($path, $all); $o->ask_from('', _("Package Group Selection"), [ { val => \$size_text, type => 'label' }, {}, (map {; my $old = $path; $path = $o->{compssUsers}{$_}{path}; if_($old ne $path, { val => translate($path) }), { val => \$val->{$_}, type => 'bool', disabled => sub { $all }, text => translate($o->{compssUsers}{$_}{label}), help => translate($o->{compssUsers}{$_}{descr}), } } @{$o->{compssUsersSorted}}), if_($o->{meta_class} eq 'desktop', { text => _("All"), val => \$all, type => 'bool' }), if_($individual, { text => _("Individual package selection"), val => $individual, advanced => 1, type => 'bool' }), ], changed => sub { $size_text = &$size_to_display }) or return; if ($all) { $val->{$_} = 1 foreach keys %$val; } 1; } sub chooseCD { my ($o, $packages) = @_; my @mediums = grep { $_ != $install_any::boot_medium } pkgs::allMediums($packages); my @mediumsDescr = (); my %mediumsDescr = (); if (!common::usingRamdisk()) { #- mono-cd in case of no ramdisk foreach (@mediums) { pkgs::mediumDescr($packages, $install_any::boot_medium) eq pkgs::mediumDescr($packages, $_) and next; undef $packages->{mediums}{$_}{selected}; } log::l("low memory install, using single CD installation (as it is not ejectable)"); return; } #- the boot medium is already selected. $mediumsDescr{pkgs::mediumDescr($packages, $install_any::boot_medium)} = 1; #- build mediumDescr according to mediums, this avoid asking multiple times #- all the medium grouped together on only one CD. foreach (@mediums) { my $descr = pkgs::mediumDescr($packages, $_); exists $mediumsDescr{$descr} or push @mediumsDescr, $descr; $mediumsDescr{$descr} ||= $packages->{mediums}{$_}{selected}; } #- if no other medium available or a poor beginner, we are choosing for him! #- note first CD is always selected and should not be unselected! return if @mediumsDescr == () || !$::expert; $o->set_help('chooseCD'); $o->ask_many_from_list('', _("If you have all the CDs in the list below, click Ok. If you have none of those CDs, click Cancel. If only some CDs are missing, unselect them, then click Ok."), { list => \@mediumsDescr, label => sub { _("Cd-Rom labeled \"%s\"", $_[0]) }, val => sub { \$mediumsDescr{$_[0]} }, }) or do { $mediumsDescr{$_} = 0 foreach @mediumsDescr; #- force unselection of other CDs. }; $o->set_help('choosePackages'); #- restore true selection of medium (which may have been grouped together) foreach (@mediums) { my $descr = pkgs::mediumDescr($packages, $_); $packages->{mediums}{$_}{selected} = $mediumsDescr{$descr}; log::l("select status of medium $_ is $packages->{mediums}{$_}{selected}"); } } #------------------------------------------------------------------------------ sub installPackages { my ($o, $packages) = @_; my ($current, $total) = 0; my $w = $o->wait_message(_("Installing"), _("Preparing installation")); my $old = \&pkgs::installCallback; local *pkgs::installCallback = sub { my $m = shift; if ($m =~ /^Starting installation/) { $total = $_[1]; } elsif ($m =~ /^Starting installing package/) { my $name = $_[0]; $w->set(_("Installing package %s\n%d%%", $name, $total && 100 * $current / $total)); $current += pkgs::packageSize(pkgs::packageByName($o->{packages}, $name)); } else { unshift @_, $m; goto $old } }; #- the modification is not local as the box should be living for other package installation. #- BEWARE this is somewhat duplicated (but not exactly from gtk code). undef *install_any::changeMedium; *install_any::changeMedium = sub { my ($method, $medium) = @_; #- if not using a cdrom medium, always abort. $method eq 'cdrom' && !$::oem and do { my $name = pkgs::mediumDescr($o->{packages}, $medium); local $| = 1; print "\a"; my $r = $name !~ /Application/ || ($o->{useless_thing_accepted2} ||= $o->ask_from_list_('', formatAlaTeX($com_license), [ __("Accept"), __("Refuse") ], "Accept") eq "Accept"); $r &&= $o->ask_okcancel('', _("Change your Cd-Rom! Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when done. If you don't have it, press Cancel to avoid installation from this Cd-Rom.", $name), 1); return $r; }; }; my $install_result; catch_cdie { $install_result = $o->install_steps::installPackages($packages); } sub { if ($@ =~ /^error ordering package list: (.*)/) { $o->ask_yesorno('', [ _("There was an error ordering packages:"), $1, _("Go on anyway?") ], 1) and return 1; ${$_[0]} = "already displayed"; } elsif ($@ =~ /^error installing package list: (.*)/) { $o->ask_yesorno('', [ _("There was an error installing packages:"), $1, _("Go on anyway?") ], 1) and return 1; ${$_[0]} = "already displayed"; } 0; }; if ($pkgs::cancel_install) { $pkgs::cancel_install = 0; die "setstep choosePackages\n"; } $install_result; } sub afterInstallPackages($) { my ($o) = @_; my $w = $o->wait_message('', _("Post-install configuration")); $o->SUPER::afterInstallPackages($o); } sub copyKernelFromFloppy { my ($o) = @_; $o->ask_okcancel('', _("Please insert the Boot floppy used in drive %s", $o->{blank}), 1) or return; $o->SUPER::copyKernelFromFloppy(); } sub updateModulesFromFloppy { my ($o) = @_; $o->ask_okcancel('', _("Please insert the Update Modules floppy in drive %s", $o->{updatemodules}), 1) or return; $o->SUPER::updateModulesFromFloppy(); } #------------------------------------------------------------------------------ sub configureNetwork { my ($o, $first_time, $noauto) = @_; require network::netconnect; network::netconnect::main($o->{prefix}, $o->{netcnx} ||= {}, $o->{netc}, $o->{mouse}, $o, $o->{intf}, $first_time, $o->{lang} eq "fr_FR" && $o->{keyboard} eq "fr", $noauto); } #-configureNetworkIntf moved to network #-configureNetworkNet moved to network #------------------------------------------------------------------------------ #-pppConfig moved to any.pm #------------------------------------------------------------------------------ sub installCrypto { my ($o) = @_; my $u = $o->{crypto} ||= {}; $::expert and $o->hasNetwork or return; is_empty_hash_ref($u) and $o->ask_yesorno('', _("You have now the possibility to download software aimed for encryption. WARNING: Due to different general requirements applicable to these software and imposed by various jurisdictions, customer and/or end user of theses software should ensure that the laws of his/their jurisdiction allow him/them to download, stock and/or use these software. In addition customer and/or end user shall particularly be aware to not infringe the laws of his/their jurisdiction. Should customer and/or end user not respect the provision of these applicable laws, he/they will incure serious sanctions. In no event shall Mandrakesoft nor its manufacturers and/or suppliers be liable for special, indirect or incidental damages whatsoever (including, but not limited to loss of profits, business interruption, loss of commercial data and other pecuniary losses, and eventual liabilities and indemnification to be paid pursuant to a court decision) arising out of use, possession, or the sole downloading of these software, to which customer and/or end user could eventually have access after having sign up the present agreement. For any queries relating to these agreement, please contact Mandrakesoft, Inc. 2400 N. Lincoln Avenue Suite 243 Altadena California 91001 USA")) || return; require crypto; eval { $u->{mirror} = $o->ask_from_listf('', _("Choose a mirror from which to get the packages"), \&crypto::mirror2text, [ crypto::mirrors() ], $u->{mirror}); }; return if $@; #- bring all interface up for installing crypto packages. install_interactive::upNetwork($o); my $update_medium = do { my $w = $o->wait_message('', _("Contacting the mirror to get the list of available packages")); crypto::getPackages($o->{prefix}, $o->{packages}, $u->{mirror}); #- make sure $o->{packages} is defined when testing }; if ($update_medium) { $o->choosePackagesTree($o->{packages}, $update_medium); $o->pkg_install(); } #- stop interface using ppp only. install_interactive::downNetwork($o, 'pppOnly'); } sub installUpdates { my ($o) = @_; my $u = $o->{updates} ||= {}; $o->hasNetwork or return; is_empty_hash_ref($u) and $o->ask_yesorno('', _("You have now the possibility to download updated packages that have been released after the distribution has been made available. You will get security fixes or bug fixes, but you need to have an Internet connection configured to proceed. Do you want to continue ?")) || return; #- bring all interface up for installing crypto packages. install_interactive::upNetwork($o); require crypto; eval { my @mirrors = do { my $w = $o->wait_message('', _("Contacting Mandrake Linux web site to get the list of available mirrors")); crypto::mirrors() }; $u->{mirror} = $o->ask_from_treelistf('', _("Choose a mirror from which to get the packages"), '|', \&crypto::mirror2text, \@mirrors, $u->{mirror}); }; return if $@; my $update_medium = do { my $w = $o->wait_message('', _("Contacting the mirror to get the list of available packages")); crypto::getPackages($o->{prefix}, $o->{packages}, $u->{mirror}); #- make sure $o->{packages} is defined when testing }; if ($update_medium) { if ($o->choosePackagesTree($o->{packages}, $update_medium)) { $o->pkg_install; $o->install_urpmi; } } #- stop interface using ppp only. install_interactive::downNetwork($o, 'pppOnly'); } #------------------------------------------------------------------------------ sub configureTimezone { my ($o, $clicked) = @_; require timezone; $o->{timezone}{timezone} = $o->ask_from_treelist('', _("Which is your timezone?"), '/', [ timezone::getTimeZones($::g_auto_install ? '' : $o->{prefix}) ], $o->{timezone}{timezone}); $o->set_help('configureTimezoneGMT'); my $ntp = to_bool($o->{timezone}{ntp}); $o->ask_from('', '', [ { text => _("Hardware clock set to GMT"), val => \$o->{timezone}{UTC}, type => 'bool' }, { text => _("Automatic time synchronization (using NTP)"), val => \$ntp, type => 'bool' }, ]) or goto &configureTimezone if $::expert || $clicked; if ($ntp) { my @servers = split("\n", $timezone::ntp_servers); $o->ask_from('', '', [ { label => _("NTP Server"), val => \$o->{timezone}{ntp}, list => \@servers, not_edit => 0 } ] ) or goto &configureTimezone; $o->{timezone}{ntp} =~ s/.*\((.+)\)/$1/; } else { $o->{timezone}{ntp} = ''; } install_steps::configureTimezone($o); } #------------------------------------------------------------------------------ sub configureServices { my ($o, $clicked) = @_; require services; $o->{services} = services::ask($o, $o->{prefix}) if $::expert || $clicked; install_steps::configureServices($o); } sub summary { my ($o, $first_time) = @_; require pkgs; if ($first_time) { #- auto-detection $o->configurePrinter(0) if !$::expert; install_any::preConfigureTimezone($o); } my $mouse_name; my $format_mouse = sub { $mouse_name = translate($o->{mouse}{type}) . ' ' . translate($o->{mouse}{name}) }; &$format_mouse; #- format printer description in a better way my $format_printers = sub { my $printer = $o->{printer}; if (is_empty_hash_ref($printer->{configured})) { pkgs::packageFlagInstalled(pkgs::packageByName($o->{packages}, 'cups')) and return _("Remote CUPS server"); return _("No printer"); } my $entry; foreach ($printer->{currentqueue}, map { $_->{queuedata} } ($printer->{configured}{$printer->{DEFAULT}}, values %{$printer->{configured}})) { $_ && ($_->{make} || $_->{model}) and return "$_->{make} $_->{model}"; } return _("Remote CUPS server"); #- fall back in case of something wrong. }; $o->ask_from_({ messages => _("Summary"), cancel => '', }, [ { label => _("Mouse"), val => \$mouse_name, clicked => sub { $o->selectMouse(1); mouse::write($o->{prefix}, $o->{mouse}); &$format_mouse } }, { label => _("Keyboard"), val => \$o->{keyboard}, clicked => sub { $o->selectKeyboard(1) }, format => sub { translate(keyboard::keyboard2text($_[0])) } }, { label => _("Timezone"), val => \$o->{timezone}{timezone}, clicked => sub { $o->configureTimezone(1) } }, { label => _("Printer"), val => \$o->{printer}, clicked => sub { $o->configurePrinter(1) }, format => $format_printers }, (map { { label => _("ISDN card"), val => $_->{description}, clicked => sub { $o->configureNetwork } } } grep { $_->{driver} eq 'hisax' } detect_devices::probeall()), (map { { label => _("Sound card"), val => $_->{description} } } arch() !~ /ppc/ ? modules::get_that_type('sound') : modules::load_thiskind('sound')), (map { { label => _("TV card"), val => $_->{description} } } grep { $_->{driver} eq 'bttv' } detect_devices::probeall()), ]); install_steps::configureTimezone($o); #- do not forget it. } #------------------------------------------------------------------------------ sub configurePrinter { my ($o, $clicked) = @_; $::corporate && !$clicked and return; require printer; require printerdrake; #- try to determine if a question should be asked to the user or #- if he is autorized to configure multiple queues. my $ask_multiple_printer = ($::expert || $clicked) && 2 || scalar(printerdrake::auto_detect($o)); $ask_multiple_printer-- or return; #- install packages needed for printer::getinfo() $::testing or $o->do_pkgs->install('foomatic'); #- take default configuration, this include choosing the right system #- currently used by the system. my $printer = $o->{printer} ||= {}; eval { add2hash($printer, printer::getinfo($o->{prefix})) }; $printer->{PAPERSIZE} = $o->{lang} eq 'en' ? 'letter' : 'a4'; printerdrake::main($printer, $o, $ask_multiple_printer, sub { install_interactive::upNetwork($o, 'pppAvoided') }); } #------------------------------------------------------------------------------ sub setRootPassword { my ($o, $clicked) = @_; my $sup = $o->{superuser} ||= {}; my $auth = ($o->{authentication}{LDAP} && __("LDAP") || $o->{authentication}{NIS} && __("NIS") || __("Local files")); $sup->{password2} ||= $sup->{password} ||= ""; return if $o->{security} < 1 && !$clicked; $::isInstall and $o->set_help("setRootPassword", if_($::expert, "setRootPasswordAuth")); $o->ask_from_( { title => _("Set root password"), messages => _("Set root password"), cancel => ($o->{security} <= 2 && !$::corporate ? _("No password") : ''), callbacks => { complete => sub { $sup->{password} eq $sup->{password2} or $o->ask_warn('', [ _("The passwords do not match"), _("Please try again") ]), return (1,1); length $sup->{password} < 2 * $o->{security} and $o->ask_warn('', _("This password is too simple (must be at least %d characters long)", 2 * $o->{security})), return (1,0); return 0 } } }, [ { label => _("Password"), val => \$sup->{password}, hidden => 1 }, { label => _("Password (again)"), val => \$sup->{password2}, hidden => 1 }, if_($::expert, { label => _("Authentication"), val => \$auth, list => [ __("Local files"), __("LDAP"), __("NIS") ], format => \&translate }, ), ]) or return; if ($auth eq __("LDAP")) { $o->{authentication}{LDAP} ||= "localhost"; #- any better solution ? $o->{netc}{LDAPDOMAIN} ||= join (',', map { "dc=$_" } split /\./, $o->{netc}{DOMAINNAME}); $o->ask_from('', _("Authentication LDAP"), [ { label => _("LDAP Base dn"), val => \$o->{netc}{LDAPDOMAIN} }, { label => _("LDAP Server"), val => \$o->{authentication}{LDAP} }, ]); } else { $o->{authentication}{LDAP} = '' } if ($auth eq __("NIS")) { $o->{authentication}{NIS} ||= 'broadcast'; $o->ask_from('', _("Authentication NIS"), [ { label => _("NIS Domain"), val => \ ($o->{netc}{NISDOMAIN} ||= $o->{netc}{DOMAINNAME}) }, { label => _("NIS Server"), val => \$o->{authentication}{NIS}, list => ["broadcast"], not_edit => 0 }, ]); } else { $o->{authentication}{NIS} = '' } install_steps::setRootPassword($o); } #------------------------------------------------------------------------------ #-addUser #------------------------------------------------------------------------------ sub addUser { my ($o, $clicked) = @_; $o->{users} ||= []; if ($o->{security} < 1) { push @{$o->{users}}, { password => 'mandrake', realname => 'default', icon => 'automagic' } if !member('mandrake', map { $_->{name} } @{$o->{users}}); } if (($o->{security} >= 1 || $clicked)) { any::ask_users($o->{prefix}, $o, $o->{users}, $o->{security}); } any::get_autologin($o->{prefix}, $o); any::autologin($o->{prefix}, $o, $o); install_steps::addUser($o); } #------------------------------------------------------------------------------ sub createBootdisk { my ($o, $first_time, $noauto) = @_; return if !$noauto && $first_time && !$::expert; if (arch() =~ /sparc/) { #- as probing floppies is a bit more different on sparc, assume always /dev/fd0. $o->ask_okcancel('', _("A custom bootdisk provides a way of booting into your Linux system without depending on the normal bootloader. This is useful if you don't want to install SILO on your system, or another operating system removes SILO, or SILO doesn't work with your hardware configuration. A custom bootdisk can also be used with the Mandrake rescue image, making it much easier to recover from severe system failures. If you want to create a bootdisk for your system, insert a floppy in the first drive and press \"Ok\"."), $o->{mkbootdisk}) or return $o->{mkbootdisk} = ''; my @l = detect_devices::floppies_dev(); $o->{mkbootdisk} = $l[0] if !$o->{mkbootdisk} || $o->{mkbootdisk} eq "1"; $o->{mkbootdisk} or return; } else { my @l = detect_devices::floppies_dev(); my %l = ( 'fd0' => _("First floppy drive"), 'fd1' => _("Second floppy drive"), 'Skip' => _("Skip"), ); if ($first_time || @l == 1) { $o->ask_yesorno('', formatAlaTeX( _("A custom bootdisk provides a way of booting into your Linux system without depending on the normal bootloader. This is useful if you don't want to install LILO (or grub) on your system, or another operating system removes LILO, or LILO doesn't work with your hardware configuration. A custom bootdisk can also be used with the Mandrake rescue image, making it much easier to recover from severe system failures. Would you like to create a bootdisk for your system?")), $o->{mkbootdisk}) or return $o->{mkbootdisk} = ''; $o->{mkbootdisk} = $l[0] if !$o->{mkbootdisk} || $o->{mkbootdisk} eq "1"; } else { @l or die _("Sorry, no floppy drive available"); $o->ask_from_( { messages => _("Choose the floppy drive you want to use to make the bootdisk"), }, [ { val => \$o->{mkbootdisk}, list => \@l, format => sub { $l{$_[0]} || $_[0] } } ] ) or return; } $o->ask_warn('', _("Insert a floppy in drive %s", $l{$o->{mkbootdisk}} || $o->{mkbootdisk})); } my $w = $o->wait_message('', _("Creating bootdisk")); install_steps::createBootdisk($o); } #------------------------------------------------------------------------------ sub setupBootloaderBefore { my ($o) = @_; my $w = $o->wait_message('', _("Preparing bootloader")); $o->set_help('empty'); $o->SUPER::setupBootloaderBefore($o); } #------------------------------------------------------------------------------ sub setupBootloader { my ($o, $more) = @_; if (arch() =~ /ppc/) { my $machtype = detect_devices::get_mac_generation(); if ($machtype !~ /NewWorld/) { $o->ask_warn('', _("You appear to have an OldWorld or Unknown\n machine, the yaboot bootloader will not work for you.\nThe install will continue, but you'll\n need to use BootX to boot your machine")); log::l("OldWorld or Unknown Machine - no yaboot setup"); return; } } if (arch() =~ /^alpha/) { $o->ask_yesorno('', _("Do you want to use aboot?"), 1) or return; catch_cdie { $o->SUPER::setupBootloader } sub { $o->ask_yesorno('', _("Error installing aboot, try to force installation even if that destroys the first partition?")); }; } else { any::setupBootloader($o, $o->{bootloader}, $o->{all_hds}, $o->{fstab}, $o->{security}, $o->{prefix}, $more) or return; { my $w = $o->wait_message('', _("Installing bootloader")); eval { $o->SUPER::setupBootloader }; } if (my $err = $@) { $err =~ /failed$/ or die; $o->ask_warn('', [ _("Installation of bootloader failed. The following error occured:"), grep { !/^Warning:/ } cat_("$o->{prefix}/tmp/.error") ]); unlink "$o->{prefix}/tmp/.error"; die "already displayed"; } elsif (arch() =~ /ppc/) { my $of_boot = cat_("$o->{prefix}/tmp/of_boot_dev") || die "Can't open $o->{prefix}/tmp/of_boot_dev"; chop($of_boot); unlink "$o->{prefix}/tmp/.error"; $o->ask_warn('', _("You may need to change your Open Firmware boot-device to\n enable the bootloader. If you don't see the bootloader prompt at\n reboot, hold down Command-Option-O-F at reboot and enter:\n setenv boot-device %s,\\\\:tbxi\n Then type: shut-down\nAt your next boot you should see the bootloader prompt.", $of_boot)); } } } sub miscellaneous { my ($o, $clicked) = @_; my %l = ( 2 => _("Low"), 3 => _("Medium"), 4 => _("High"), ); if ($::expert || $clicked) { $ENV{SECURE_LEVEL} = $o->{security} = $o->ask_from_listf('', _("Choose security level"), sub { $l{$_[0]} }, [ ikeys %l ], $o->{security}) or return; } install_steps::miscellaneous($o); } #------------------------------------------------------------------------------ sub configureX { my ($o, $clicked) = @_; $o->configureXBefore; #- strange, xfs must not be started twice... #- trying to stop and restart it does nothing good too... my $xfs_started if 0; run_program::rooted($o->{prefix}, "/etc/rc.d/init.d/xfs", "start") unless $::live || $xfs_started; $xfs_started = 1; require Xconfigurator; { local $::testing = 0; #- unset testing local $::auto = !$::expert && !$clicked; symlink "$o->{prefix}/etc/gtk", "/etc/gtk"; Xconfigurator::main($o->{prefix}, $o->{X}, $o, $o->do_pkgs, { allowFB => $o->{allowFB}, allowNVIDIA_rpms => install_any::allowNVIDIA_rpms($o->{packages}), }); } $o->configureXAfter; } #------------------------------------------------------------------------------ sub generateAutoInstFloppy { my ($o, $replay) = @_; my $floppy = detect_devices::floppy(); $o->ask_okcancel('', _("Insert a blank floppy in drive %s", $floppy), 1) or return; my $dev = devices::make($floppy); { my $w = $o->wait_message('', _("Creating auto install floppy")); install_any::getAndSaveAutoInstallFloppy($o, $replay, $dev) or return; } common::sync(); #- if you shall remove the floppy right after the LED switches off } #------------------------------------------------------------------------------ sub exitInstall { my ($o, $alldone) = @_; return $o->{step} = '' unless $alldone || $o->ask_yesorno('', _("Some steps are not completed. Do you really want to quit now?"), 0); install_steps::exitInstall($o); $o->exit unless $alldone; $o->ask_from_no_check( { messages => _("Congratulations, installation is complete. Remove the boot media and press return to reboot. For information on fixes which are available for this release of Mandrake Linux, consult the Errata available from http://www.mandrakelinux.com/. Information on configuring your system is available in the post install chapter of the Official Mandrake Linux User's Guide."), cancel => '', }, [ if_($::expert, { val => \ (my $t1 = _("Generate auto install floppy")), clicked => sub { my $t = $o->ask_from_list_('', _("The auto install can be fully automated if wanted, in that case it will take over the hard drive!! (this is meant for installing on another box). You may prefer to replay the installation. "), [ __("Replay"), __("Automated") ]); $t and $o->generateAutoInstFloppy($t eq 'Replay'); }, advanced => 1 }, { val => \ (my $t2 = _("Save packages selection")), clicked => sub { install_any::g_default_packages($o) }, advanced => 1 }, ), ] ) if $alldone && !$::g_auto_install; } #-###################################################################################### #- Misc Steps Functions #-###################################################################################### #-###################################################################################### #- Wonderful perl :( #-###################################################################################### 1;