From dadaa56cd93005872900da1b75432b062f9fa960 Mon Sep 17 00:00:00 2001
From: Pablo Saratxaga <pablo@mandriva.com>
Date: Thu, 30 Sep 1999 00:22:07 +0000
Subject: updates

---
 perl-install/share/po/Changelog |   3 +
 perl-install/share/po/no.po     | 468 ++++++++++++++++++++++++++++++----------
 2 files changed, 357 insertions(+), 114 deletions(-)

(limited to 'perl-install')

diff --git a/perl-install/share/po/Changelog b/perl-install/share/po/Changelog
index afab07f1d..89743c616 100644
--- a/perl-install/share/po/Changelog
+++ b/perl-install/share/po/Changelog
@@ -1,3 +1,6 @@
+1999-09-30  Pablo Saratxaga <pablo@mandrakesoft.com>
+	* es.po: updated Spanish language file
+
 1999-09-26  Pablo Saratxaga <pablo@mandrakesoft.com>
 	* no.po: updated norwegian file
 
diff --git a/perl-install/share/po/no.po b/perl-install/share/po/no.po
index 80f026b81..b393e6247 100644
--- a/perl-install/share/po/no.po
+++ b/perl-install/share/po/no.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: panoramix VERSION\n"
-"POT-Creation-Date: 1999-09-28 22:20+0200\n"
+"POT-Creation-Date: 1999-09-30 01:32+0200\n"
 "PO-Revision-Date: 1999-08-25 11:07+0200\n"
 "Last-Translator: Terje Bjerkelia <terje@bjerkelia.com>\n"
 "Language-Team: norwegian\n"
@@ -29,6 +29,19 @@ msgstr "Velg minnest
 msgid "Choose a monitor"
 msgstr "Velg en monitor"
 
+#: ../Xconfigurator.pm_.c:202
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor. If in doubt, choose a\n"
+"conservative setting."
+msgstr ""
+
 #: ../Xconfigurator.pm_.c:209
 msgid "Horizontal refresh rate"
 msgstr "Horisontal oppfrisknings-rate"
@@ -86,6 +99,13 @@ msgstr "En feil oppsto, pr
 msgid "Automatic resolutions"
 msgstr "Automatiske oppløsninger"
 
+#: ../Xconfigurator.pm_.c:335
+msgid ""
+"To find the available resolutions i will try different ones.\n"
+"Your screen will blink...\n"
+"You can switch if off if you want, you'll hear a beep when it's over"
+msgstr ""
+
 #: ../Xconfigurator.pm_.c:382 ../install_steps_interactive.pm_.c:404
 #: ../install_steps_interactive.pm_.c:405
 msgid "Resolution"
@@ -95,91 +115,121 @@ msgstr "Oppl
 msgid "Choose resolution and color depth"
 msgstr "Velg oppløsning og fargedybde"
 
-#: ../Xconfigurator.pm_.c:675
+#: ../Xconfigurator.pm_.c:484
+msgid ""
+"I can try to find the available resolutions (eg: 800x600).\n"
+"Alas it can freeze sometimes\n"
+"Do you want to try?"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:489
+msgid ""
+"No valid modes found\n"
+"Try with another video card or monitor"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:673
 #, c-format
 msgid "Keyboard layout: %s\n"
 msgstr "Tastatur-oppsett: %s\n"
 
-#: ../Xconfigurator.pm_.c:676
+#: ../Xconfigurator.pm_.c:674
 #, c-format
 msgid "Mouse type: %s\n"
 msgstr "Type mus: %s\n"
 
-#: ../Xconfigurator.pm_.c:677
+#: ../Xconfigurator.pm_.c:675
 #, c-format
 msgid "Mouse device: %s\n"
 msgstr "Enhet mus: %s\n"
 
-#: ../Xconfigurator.pm_.c:678
+#: ../Xconfigurator.pm_.c:676
 #, c-format
 msgid "Monitor: %s\n"
 msgstr "Monitor: %s\n"
 
-#: ../Xconfigurator.pm_.c:679
+#: ../Xconfigurator.pm_.c:677
 #, c-format
 msgid "Monitor HorizSync: %s\n"
 msgstr "Monitor HorizSync: %s\n"
 
-#: ../Xconfigurator.pm_.c:680
+#: ../Xconfigurator.pm_.c:678
 #, c-format
 msgid "Monitor VertRefresh: %s\n"
 msgstr "Monitor VertRefresh: %s\n"
 
-#: ../Xconfigurator.pm_.c:681
+#: ../Xconfigurator.pm_.c:679
 #, c-format
 msgid "Graphic card: %s\n"
 msgstr "Grafikk-kort: %s\n"
 
-#: ../Xconfigurator.pm_.c:682
+#: ../Xconfigurator.pm_.c:680
 #, c-format
 msgid "Graphic memory: %s KB\n"
 msgstr "Minne grafikk: %s KB\n"
 
-#: ../Xconfigurator.pm_.c:683
+#: ../Xconfigurator.pm_.c:681
 #, c-format
 msgid "XFree86 server: %s\n"
 msgstr "XFree86-tjener: %s\n"
 
-#: ../Xconfigurator.pm_.c:708
+#: ../Xconfigurator.pm_.c:706
 msgid "Change Monitor"
 msgstr "Endre monitor"
 
-#: ../Xconfigurator.pm_.c:709
+#: ../Xconfigurator.pm_.c:707
 msgid "Change Graphic card"
 msgstr "Endre grafikk-kort"
 
-#: ../Xconfigurator.pm_.c:710
+#: ../Xconfigurator.pm_.c:708
 msgid "Change Resolution"
 msgstr "Endre oppløsning"
 
-#: ../Xconfigurator.pm_.c:711
+#: ../Xconfigurator.pm_.c:709
 msgid "Automatical resolutions search"
 msgstr "Automatisk oppløsningssøk"
 
-#: ../Xconfigurator.pm_.c:715
+#: ../Xconfigurator.pm_.c:713
 msgid "Show information"
 msgstr "Vis informasjon"
 
-#: ../Xconfigurator.pm_.c:716
+#: ../Xconfigurator.pm_.c:714
 msgid "Test again"
 msgstr "Test igjen"
 
-#: ../Xconfigurator.pm_.c:717
+#: ../Xconfigurator.pm_.c:715
 msgid "Quit"
 msgstr "Slutt"
 
-#: ../Xconfigurator.pm_.c:720
+#: ../Xconfigurator.pm_.c:718
 msgid "What do you want to do?"
 msgstr "Hva vil du gjøre?"
 
-#: ../Xconfigurator.pm_.c:725
+#: ../Xconfigurator.pm_.c:723
 msgid "X at startup"
 msgstr "X ved oppstart"
 
-#: ../Xconfigurator.pm_.c:731
+#: ../Xconfigurator.pm_.c:724
+msgid ""
+"I can set up your computer to automatically start X upon booting.\n"
+"Would you like X to start when you reboot?"
+msgstr ""
+
+#: ../Xconfigurator.pm_.c:729
 msgid "X successfully configured"
 msgstr "Konfigurasjon av X vellykket"
 
+#: ../Xconfigurator.pm_.c:730
+msgid ""
+"Configuration file has been written. Take a look at it before running "
+"'startx'.\n"
+"Within the server press ctrl, alt and '+' simultaneously to cycle video "
+"resolutions.\n"
+"Pressing ctrl, alt and backspace simultaneously immediately exits the "
+"server\n"
+"For further configuration, refer to /usr/X11R6/lib/X11/doc/README.Config."
+msgstr ""
+
 #: ../Xconfigurator_consts.pm_.c:4
 msgid "256 colors"
 msgstr "256 farger"
@@ -532,6 +582,11 @@ msgstr "Angre"
 msgid "Write partition table"
 msgstr "Skriv partisjonstabell"
 
+#: ../diskdrake.pm_.c:96
+#, fuzzy
+msgid "Details"
+msgstr "Dansk"
+
 #: ../diskdrake.pm_.c:118
 #, c-format
 msgid "After %s partition %s,"
@@ -545,7 +600,7 @@ msgstr "Les n
 msgid "all data on this partition will be lost"
 msgstr "alle data på denne partisjonen vil gå tapt"
 
-#: ../diskdrake.pm_.c:136 ../install2.pm_.c:315 ../install2.pm_.c:348
+#: ../diskdrake.pm_.c:136 ../install2.pm_.c:316 ../install2.pm_.c:351
 #: ../install_steps.pm_.c:66 ../install_steps_interactive.pm_.c:36
 msgid "Error"
 msgstr "Feil"
@@ -629,6 +684,27 @@ msgstr "Monter"
 msgid "Active"
 msgstr "Aktiv"
 
+#: ../diskdrake.pm_.c:287
+msgid ""
+"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
+"1024).\n"
+"Either you use lilo and it won't work, or you don't use a lilo and you don't "
+"need /boot"
+msgstr ""
+
+#: ../diskdrake.pm_.c:291
+#, fuzzy
+msgid ""
+"The partition you've selected to add as root (/) is physically located "
+"beyond\n"
+"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
+"If you plan to use the lilo boot manager, be careful to add a /boot partition"
+msgstr ""
+"Du er i ferd med å legge til en rotpartisjon langt ute på disken (på en\n"
+"sylinder > 1024), og du har ingen /boot partisjon. Så hvis du planlegger å "
+"bruke lilo (oppstartshåndtereren),\n"
+"vær nøye med å legge til en /boot partisjon"
+
 #: ../diskdrake.pm_.c:305
 msgid "Leave without saving"
 msgstr "Avslutt uten å lagre"
@@ -649,6 +725,11 @@ msgstr "Endre partisjonstype"
 msgid "Which partition type do you want?"
 msgstr "Hvilken partisjonstype ønsker du?"
 
+#: ../diskdrake.pm_.c:337
+#, c-format
+msgid "Where do you want to mount device %s?"
+msgstr "Hvor vil du montere %s enheten?"
+
 #: ../diskdrake.pm_.c:338
 msgid "Mount point"
 msgstr "Monteringspunkt"
@@ -698,7 +779,7 @@ msgstr "Du m
 msgid "Computing fat filesystem bounds"
 msgstr "Beregner fat filsystemgrense"
 
-#: ../diskdrake.pm_.c:413 ../diskdrake.pm_.c:457 ../interactive_gtk.pm_.c:207
+#: ../diskdrake.pm_.c:413 ../diskdrake.pm_.c:457
 msgid "Resizing"
 msgstr "Endrer størrelse"
 
@@ -710,7 +791,7 @@ msgstr "endrer st
 msgid "Choose the new size"
 msgstr "Velg ny størrelse"
 
-#: ../diskdrake.pm_.c:436 ../install_steps_graphical.pm_.c:269
+#: ../diskdrake.pm_.c:436 ../install_steps_graphical.pm_.c:270
 msgid "MB"
 msgstr "MB"
 
@@ -738,10 +819,23 @@ msgstr "Valg: "
 msgid "Select file"
 msgstr "Velg fil"
 
+#: ../diskdrake.pm_.c:558
+msgid ""
+"The backup partition table has not the same size\n"
+"Still continue?"
+msgstr ""
+
 #: ../diskdrake.pm_.c:566
 msgid "Warning"
 msgstr "Advarsel"
 
+#: ../diskdrake.pm_.c:567
+#, fuzzy
+msgid ""
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
+msgstr "alle data på denne partisjonen vil gå tapt"
+
 #: ../diskdrake.pm_.c:581
 msgid "Searching for your lost partition table"
 msgstr "Søker etter din tapte partisjonstabell"
@@ -949,7 +1043,7 @@ msgstr ""
 #: ../help.pm_.c:88 ../help.pm_.c:91 ../help.pm_.c:94 ../help.pm_.c:97
 #: ../help.pm_.c:100 ../help.pm_.c:135 ../help.pm_.c:151 ../help.pm_.c:238
 #: ../help.pm_.c:241 ../help.pm_.c:244 ../help.pm_.c:247 ../help.pm_.c:250
-#: ../help.pm_.c:285 ../help.pm_.c:301 ../install2.pm_.c:64
+#: ../help.pm_.c:285 ../help.pm_.c:301 ../install2.pm_.c:65
 msgid "Help"
 msgstr "Hjelp"
 
@@ -1044,119 +1138,125 @@ msgstr ""
 "Deretter kan du teste konfigurasjonen og endre dine valg hvis det er\n"
 "nødvendig."
 
-#: ../install2.pm_.c:38
+#: ../install2.pm_.c:39
 msgid "Choose your language"
 msgstr "Velg språk"
 
-#: ../install2.pm_.c:39
+#: ../install2.pm_.c:40
 msgid "Select installation class"
 msgstr "Velg installasjonsklasse"
 
-#: ../install2.pm_.c:40
+#: ../install2.pm_.c:41
 msgid "Setup SCSI"
 msgstr "Oppsett SCSI"
 
-#: ../install2.pm_.c:41
+#: ../install2.pm_.c:42
 msgid "Choose install or upgrade"
 msgstr "Velg installering eller oppgradering"
 
-#: ../install2.pm_.c:42
+#: ../install2.pm_.c:43
 msgid "Configure mouse"
 msgstr "Konfigurer mus"
 
-#: ../install2.pm_.c:43
+#: ../install2.pm_.c:44
 msgid "Choose your keyboard"
 msgstr "Velg tastatur"
 
-#: ../install2.pm_.c:44
+#: ../install2.pm_.c:45
 msgid "Setup filesystems"
 msgstr "Oppsett filsystemer"
 
-#: ../install2.pm_.c:45
+#: ../install2.pm_.c:46
 msgid "Format partitions"
 msgstr "Formater partisjoner"
 
-#: ../install2.pm_.c:46
+#: ../install2.pm_.c:47
 msgid "Choose packages to install"
 msgstr "Velg pakker for installering"
 
-#: ../install2.pm_.c:47
+#: ../install2.pm_.c:48
 msgid "Install system"
 msgstr "Installer systemet"
 
-#: ../install2.pm_.c:48
+#: ../install2.pm_.c:49
 msgid "Configure networking"
 msgstr "Konfigurer nettverk"
 
-#: ../install2.pm_.c:49
+#: ../install2.pm_.c:50
 msgid "Configure timezone"
 msgstr "Konfigurer tidssone"
 
-#: ../install2.pm_.c:51
+#: ../install2.pm_.c:52
 msgid "Configure printer"
 msgstr "Konfigurer skriver"
 
-#: ../install2.pm_.c:52 ../install_steps_interactive.pm_.c:462
+#: ../install2.pm_.c:53 ../install_steps_interactive.pm_.c:462
 #: ../install_steps_interactive.pm_.c:463
 msgid "Set root password"
 msgstr "Sett root-passord"
 
-#: ../install2.pm_.c:53
+#: ../install2.pm_.c:54
 msgid "Add a user"
 msgstr "Legg til en bruker"
 
-#: ../install2.pm_.c:54
+#: ../install2.pm_.c:55
 msgid "Create bootdisk"
 msgstr "Opprett oppstartdiskett"
 
-#: ../install2.pm_.c:55
+#: ../install2.pm_.c:56
 msgid "Install bootloader"
 msgstr "Installer oppstartslaster"
 
-#: ../install2.pm_.c:56
+#: ../install2.pm_.c:57
 msgid "Configure X"
 msgstr "Konfigurer X"
 
-#: ../install2.pm_.c:57
+#: ../install2.pm_.c:58
 msgid "Exit install"
 msgstr "Gå ut av installering"
 
-#: ../install2.pm_.c:77
+#: ../install2.pm_.c:78
 msgid "beginner"
 msgstr "nybegynner"
 
-#: ../install2.pm_.c:77
+#: ../install2.pm_.c:78
 msgid "developer"
 msgstr "utvikler"
 
-#: ../install2.pm_.c:77
+#: ../install2.pm_.c:78
 msgid "expert"
 msgstr "ekspert"
 
-#: ../install2.pm_.c:77
+#: ../install2.pm_.c:78
 msgid "server"
 msgstr "tjener"
 
-#: ../install2.pm_.c:268
+#: ../install2.pm_.c:269
 msgid " : This is not a root partition, try again."
 msgstr ""
 
-#: ../install2.pm_.c:268 ../install2.pm_.c:294
+#: ../install2.pm_.c:269 ../install2.pm_.c:295
 #, fuzzy
 msgid "Information"
 msgstr "formatering"
 
-#: ../install2.pm_.c:294
+#: ../install2.pm_.c:295
 #, fuzzy
 msgid "Found root partition : "
 msgstr "Formater partisjoner"
 
-#: ../install2.pm_.c:315
+#: ../install2.pm_.c:316
 #, fuzzy
 msgid "No root partition found"
 msgstr "Formater partisjoner"
 
-#: ../install2.pm_.c:360
+#: ../install2.pm_.c:352
+msgid ""
+"I can't read your partition table, it's too corrupted for me :(\n"
+"I'll try to go on blanking bad partitions"
+msgstr ""
+
+#: ../install2.pm_.c:363
 msgid ""
 "An error has occurred - no valid devices were found on which to create new "
 "filesystems. Please check your hardware for the cause of this problem"
@@ -1164,82 +1264,99 @@ msgstr ""
 "En feil har oppstått - ingen gyldige enheter ble funnet for å opprette nye "
 "filsystemer. Vennligst sjekk maskinvaren din for årsaken til dette problemet"
 
-#: ../install2.pm_.c:381
+#: ../install2.pm_.c:384
 msgid "partitioning failed: no root filesystem"
 msgstr "partisjonering feilet: intet root-filsystem"
 
-#: ../install2.pm_.c:543
+#: ../install2.pm_.c:546
 msgid "Error reading file $f"
 msgstr "Feil ved lesing av fil $f"
 
-#: ../install2.pm_.c:548
+#: ../install2.pm_.c:551
 #, c-format
 msgid "Bad kickstart file %s (failed %s)"
 msgstr "Dårlig kickstart-fil %s (mislykket %s)"
 
+#: ../install_steps.pm_.c:67
+msgid ""
+"An error occurred, i don't know how to handle it nicely,\n"
+"so continue at your own risk :("
+msgstr ""
+
 #: ../install_steps.pm_.c:273
 msgid "no floppy available"
 msgstr "ingen diskett tilgjengelig"
 
-#: ../install_steps_graphical.pm_.c:269
+#: ../install_steps_graphical.pm_.c:270
 msgid "Total size: "
 msgstr "Total størrelse: "
 
-#: ../install_steps_graphical.pm_.c:288
-msgid "Hide"
-msgstr "Gjem"
-
-#: ../install_steps_graphical.pm_.c:288
-msgid "Show All"
-msgstr "Vis alle"
-
-#: ../install_steps_graphical.pm_.c:292
-msgid "Select All"
-msgstr "Velg alle"
-
-#: ../install_steps_graphical.pm_.c:292
-msgid "Unselect All"
-msgstr "Fjern alle valg"
-
-#: ../install_steps_graphical.pm_.c:359
+#: ../install_steps_graphical.pm_.c:367
 msgid "Choose the packages you want to install"
 msgstr "Velg pakkene du ønsker å installere"
 
-#: ../install_steps_graphical.pm_.c:371
+#: ../install_steps_graphical.pm_.c:379
 msgid "Info"
 msgstr "Info"
 
-#: ../install_steps_graphical.pm_.c:397
+#: ../install_steps_graphical.pm_.c:384
+msgid "Go"
+msgstr ""
+
+#: ../install_steps_graphical.pm_.c:385
+#, fuzzy
+msgid "Select less"
+msgstr "Velg fil"
+
+#: ../install_steps_graphical.pm_.c:386
+#, fuzzy
+msgid "Select more"
+msgstr "Velg fil"
+
+#: ../install_steps_graphical.pm_.c:387
+#, fuzzy
+msgid "Show less"
+msgstr "Vis alle"
+
+#: ../install_steps_graphical.pm_.c:388
+msgid "Show more"
+msgstr ""
+
+#: ../install_steps_graphical.pm_.c:406
 msgid "Installing"
 msgstr "Installerer"
 
-#: ../install_steps_graphical.pm_.c:403
+#: ../install_steps_graphical.pm_.c:412
 msgid "Please wait, "
 msgstr "Vennligst vent, "
 
-#: ../install_steps_graphical.pm_.c:405
+#: ../install_steps_graphical.pm_.c:414
 msgid "Time remaining "
 msgstr "Tid som gjenstår "
 
-#: ../install_steps_graphical.pm_.c:406
+#: ../install_steps_graphical.pm_.c:415
 msgid "Total time "
 msgstr "Total tid "
 
-#: ../install_steps_graphical.pm_.c:411
+#: ../install_steps_graphical.pm_.c:420
 msgid "preparing installation"
 msgstr "forbereder installasjon"
 
-#: ../install_steps_graphical.pm_.c:432
+#: ../install_steps_graphical.pm_.c:441
 #, c-format
 msgid "installing package %s"
 msgstr "installerer pakke %s"
 
-#: ../install_steps_graphical.pm_.c:457
+#: ../install_steps_graphical.pm_.c:466
 msgid "Go on anyway?"
 msgstr ""
 
-#: ../install_steps_graphical.pm_.c:549 ../interactive.pm_.c:47
-#: ../interactive.pm_.c:57 ../my_gtk.pm_.c:194 ../my_gtk.pm_.c:346
+#: ../install_steps_graphical.pm_.c:466
+msgid "There was an error ordering packages:"
+msgstr ""
+
+#: ../install_steps_graphical.pm_.c:558 ../interactive.pm_.c:47
+#: ../interactive.pm_.c:57 ../my_gtk.pm_.c:192 ../my_gtk.pm_.c:346
 #: ../my_gtk.pm_.c:430
 msgid "Ok"
 msgstr "Ok"
@@ -1545,6 +1662,7 @@ msgstr "Du kan n
 
 #: ../install_steps_interactive.pm_.c:464
 #: ../install_steps_interactive.pm_.c:489
+#: ../install_steps_interactive.pm_.c:572
 msgid "Password"
 msgstr "Passord"
 
@@ -1661,14 +1779,40 @@ msgstr "Hvor vil du installere oppstartslasteren?"
 msgid "Do you want to use lilo?"
 msgstr "Ønsker du å bruke lilo?"
 
+#: ../install_steps_interactive.pm_.c:567
+msgid "Boot device"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:568
+msgid "Linear (needed for some SCSI drives)"
+msgstr ""
+
 #: ../install_steps_interactive.pm_.c:568
 msgid "linear"
 msgstr "lineær"
 
+#: ../install_steps_interactive.pm_.c:569
+#, fuzzy
+msgid "Compact"
+msgstr "kompakt"
+
 #: ../install_steps_interactive.pm_.c:569
 msgid "compact"
 msgstr "kompakt"
 
+#: ../install_steps_interactive.pm_.c:570
+msgid "Delay before choosing default choice"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:571
+msgid "Video mode"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:573
+#, fuzzy
+msgid "Restrict command line options"
+msgstr "Lilo hovedopsjoner"
+
 #: ../install_steps_interactive.pm_.c:573
 msgid "restrict"
 msgstr "begrense"
@@ -1683,19 +1827,99 @@ msgid ""
 msgstr ""
 "Opsjon ``Begrense kommandolinje-opsjoner'' kan ikke brukes uten et passord"
 
+#: ../install_steps_interactive.pm_.c:592
+msgid ""
+"Here are the following entries in lilo\n"
+"You can add some more or change the existent ones."
+msgstr ""
+
 #: ../install_steps_interactive.pm_.c:594
 msgid "Add"
 msgstr "Legg til"
 
+#: ../install_steps_interactive.pm_.c:611
+msgid "Image"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:612
+#: ../install_steps_interactive.pm_.c:620
+msgid "Root"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:613
+msgid "Append"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:614
+msgid "Initrd"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:615
+msgid "Read-write"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:621
+msgid "Table"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:622
+msgid "Unsafe"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:627
+msgid "Label"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:629
+#, fuzzy
+msgid "Default"
+msgstr "Slett"
+
 #: ../install_steps_interactive.pm_.c:646
 msgid "Lilo failed. The following error occured:"
 msgstr ""
 
+#: ../install_steps_interactive.pm_.c:657
+msgid ""
+"Some steps are not completed\n"
+"Do you really want to quit now?"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:661
+msgid ""
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
+"For information on fixes which are available for this release of Linux "
+"Mandrake,\n"
+"consult the Errata available from http://www.linux-mandrake.com/.\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Linux Mandrake User's Guide."
+msgstr ""
+"Gratulerer, installasjonen er fullført.\n"
+"Fjern oppstartsmediet og trykk return for å starte på nytt.\n"
+"For informasjon om fiks som er tilgjengelig for denne utgaven av Linux "
+"Mandrake,\n"
+"sjekk Errataen tilgjengelig fra http://www.linux-mandrake.com/.\n"
+"Informasjon om konfigurering av systemet ditt finnes i post\n"
+"install-kapittelet i Official Linux Mandrake User's Guide."
+
 #: ../install_steps_interactive.pm_.c:678
 #, c-format
 msgid "What %s card have you?"
 msgstr "Hvilket %s kort har du?"
 
+#: ../install_steps_interactive.pm_.c:685
+#, c-format
+msgid ""
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
+msgstr ""
+
 #: ../install_steps_interactive.pm_.c:690
 msgid "Autoprobe"
 msgstr "Automatisk sondering"
@@ -1704,10 +1928,30 @@ msgstr "Automatisk sondering"
 msgid "Specify options"
 msgstr "Spesifiser opsjoner"
 
+#: ../install_steps_interactive.pm_.c:694
+#, c-format
+msgid "Here must give the different options for the module %s."
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:700
+#, c-format
+msgid ""
+"Here must give the different options for the module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For example you can have ``io=0x300 irq=7''"
+msgstr ""
+
 #: ../install_steps_interactive.pm_.c:703
 msgid "Module options:"
 msgstr "Modulopsjoner:"
 
+#: ../install_steps_interactive.pm_.c:710
+#, c-format
+msgid ""
+"Loading of module %s failed\n"
+"Do you want to try again with other parameters?"
+msgstr ""
+
 #: ../install_steps_interactive.pm_.c:723
 #, c-format
 msgid "Installing driver for %s card %s"
@@ -1718,6 +1962,11 @@ msgstr "Installerer driver for %s kort %s"
 msgid "(module %s)"
 msgstr "(modul %s)"
 
+#: ../install_steps_interactive.pm_.c:732
+#, c-format
+msgid "Skip %s pci probe"
+msgstr ""
+
 #: ../install_steps_interactive.pm_.c:736
 #, c-format
 msgid "Found %s %s interfaces"
@@ -1751,7 +2000,7 @@ msgstr "Se maskinvareinfo"
 msgid "Starting step `%s'\n"
 msgstr "Starter steg `%s'\n"
 
-#: ../interactive.pm_.c:57 ../my_gtk.pm_.c:195 ../my_gtk.pm_.c:346
+#: ../interactive.pm_.c:57 ../my_gtk.pm_.c:193 ../my_gtk.pm_.c:346
 msgid "Cancel"
 msgstr "Avbryt"
 
@@ -1913,6 +2162,12 @@ msgstr "US-tastatur"
 msgid "Yugoslavian (latin layout)"
 msgstr "Jugoslavisk (latinsk oppsett)"
 
+#: ../lilo.pm_.c:100
+msgid ""
+"Welcome to lilo the operating system chooser!\n"
+"To know the different choices, press <TAB>\n"
+msgstr ""
+
 #: ../mouse.pm_.c:15
 msgid "No Mouse"
 msgstr "Ingen mus"
@@ -2033,6 +2288,13 @@ msgstr "Logitech Bus Mouse"
 msgid "Is it ok?"
 msgstr "Er det ok?"
 
+#: ../partition_table.pm_.c:372
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions"
+msgstr ""
+
 #: ../partition_table.pm_.c:458
 #, c-format
 msgid "Error reading file %s"
@@ -2052,22 +2314,14 @@ msgstr "D
 msgid "Error writing to file %s"
 msgstr "Feil ved skriving til fil %s"
 
-#~ msgid ""
-#~ "Congratulations, installation is complete.\n"
-#~ "Remove the boot media and press return to reboot.\n"
-#~ "For information on fixes which are available for this release of Linux "
-#~ "Mandrake,\n"
-#~ "consult the Errata available from http://www.linux-mandrake.com/.\n"
-#~ "Information on configuring your system is available in the post\n"
-#~ "install chapter of the Official Linux Mandrake User's Guide."
-#~ msgstr ""
-#~ "Gratulerer, installasjonen er fullført.\n"
-#~ "Fjern oppstartsmediet og trykk return for å starte på nytt.\n"
-#~ "For informasjon om fiks som er tilgjengelig for denne utgaven av Linux "
-#~ "Mandrake,\n"
-#~ "sjekk Errataen tilgjengelig fra http://www.linux-mandrake.com/.\n"
-#~ "Informasjon om konfigurering av systemet ditt finnes i post\n"
-#~ "install-kapittelet i Official Linux Mandrake User's Guide."
+#~ msgid "Hide"
+#~ msgstr "Gjem"
+
+#~ msgid "Select All"
+#~ msgstr "Velg alle"
+
+#~ msgid "Unselect All"
+#~ msgstr "Fjern alle valg"
 
 #~ msgid ""
 #~ "It is now time to configure the graphic server. First of all, choose your "
@@ -2170,17 +2424,6 @@ msgstr "Feil ved skriving til fil %s"
 #~ msgid "Configure services"
 #~ msgstr "Konfigurer tjenester"
 
-#~ msgid ""
-#~ "You're adding a root partition far on the drive (on a cylinder > 1024),\n"
-#~ "and you have no /boot partition. So if you plan to use lilo (the boot "
-#~ "manager),\n"
-#~ "be careful to add a /boot partition"
-#~ msgstr ""
-#~ "Du er i ferd med å legge til en rotpartisjon langt ute på disken (på en\n"
-#~ "sylinder > 1024), og du har ingen /boot partisjon. Så hvis du planlegger å "
-#~ "bruke lilo (oppstartshåndtereren),\n"
-#~ "vær nøye med å legge til en /boot partisjon"
-
 #~ msgid "Give your graphic card memory size"
 #~ msgstr "Oppgi hvor mye minne grafikk-kortet ditt har"
 
@@ -2205,9 +2448,6 @@ msgstr "Feil ved skriving til fil %s"
 #~ msgid "Configuring network device %s"
 #~ msgstr "Konfigurerer nettverks-enhet %s"
 
-#~ msgid "Where do you want to mount device %s?"
-#~ msgstr "Hvor vil du montere %s enheten?"
-
 #~ msgid "Package ordering failed"
 #~ msgstr "Pakkelevering mislykket"
 
-- 
cgit v1.2.1