From ab2a1bcbfb341d2cca17ef2c05d8af133c517793 Mon Sep 17 00:00:00 2001 From: Martin Whitaker Date: Wed, 17 Jun 2020 13:52:09 +0100 Subject: Update translation catalogue. --- perl-install/share/po/zh_TW.po | 660 ++++++++++++++++++++--------------------- 1 file changed, 330 insertions(+), 330 deletions(-) (limited to 'perl-install/share/po/zh_TW.po') diff --git a/perl-install/share/po/zh_TW.po b/perl-install/share/po/zh_TW.po index 29c0e8241..15f30ce3a 100644 --- a/perl-install/share/po/zh_TW.po +++ b/perl-install/share/po/zh_TW.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: Mageia\n" -"POT-Creation-Date: 2018-12-26 18:36+0200\n" +"POT-Creation-Date: 2020-06-17 13:47+0100\n" "PO-Revision-Date: 2019-06-07 00:28+0000\n" "Last-Translator: You-Cheng Hsieh \n" "Language-Team: Chinese (Taiwan) (http://www.transifex.com/MageiaLinux/mageia/" @@ -19,21 +19,21 @@ msgstr "" "Content-Transfer-Encoding: 8-bit\n" "Plural-Forms: nplurals=1; plural=0;\n" -#: any.pm:263 any.pm:696 any.pm:1113 diskdrake/interactive.pm:650 -#: diskdrake/interactive.pm:874 diskdrake/interactive.pm:936 -#: diskdrake/interactive.pm:1028 diskdrake/interactive.pm:1055 -#: diskdrake/interactive.pm:1286 diskdrake/interactive.pm:1344 do_pkgs.pm:342 -#: do_pkgs.pm:388 interactive.pm:712 pkgs.pm:293 +#: any.pm:272 any.pm:705 any.pm:1129 diskdrake/interactive.pm:650 +#: diskdrake/interactive.pm:901 diskdrake/interactive.pm:966 +#: diskdrake/interactive.pm:1058 diskdrake/interactive.pm:1085 +#: diskdrake/interactive.pm:1316 diskdrake/interactive.pm:1374 do_pkgs.pm:342 +#: do_pkgs.pm:388 interactive.pm:712 pkgs.pm:294 #, c-format msgid "Please wait" msgstr "請稍候" -#: any.pm:263 +#: any.pm:272 #, c-format msgid "Bootloader installation in progress" msgstr "開機載入程式安裝中" -#: any.pm:274 +#: any.pm:283 #, c-format msgid "" "LILO wants to assign a new Volume ID to drive %s. However, changing\n" @@ -49,12 +49,12 @@ msgstr "" "\n" "要分配一個新的磁區標籤？" -#: any.pm:285 +#: any.pm:294 #, c-format msgid "Installation of bootloader failed. The following error occurred:" msgstr "開機程式安裝失敗，發生如下之錯誤：" -#: any.pm:325 +#: any.pm:334 #, c-format msgid "" "You decided to install the bootloader on a partition.\n" @@ -69,233 +69,233 @@ msgstr "" "\n" "您打算用哪個磁碟開機？" -#: any.pm:336 +#: any.pm:345 #, c-format msgid "Bootloader Installation" msgstr "開機載入程式安裝" -#: any.pm:340 +#: any.pm:349 #, c-format msgid "Where do you want to install the bootloader?" msgstr "您要將開機載入程式安裝在那裡？" -#: any.pm:356 +#: any.pm:365 #, c-format msgid "First sector (MBR) of drive %s" msgstr "%s 硬碟的第一個扇區 (MBR)" -#: any.pm:358 +#: any.pm:367 #, c-format msgid "First sector of drive (MBR)" msgstr "硬碟的第一個扇區 (MBR)" -#: any.pm:360 +#: any.pm:369 #, c-format msgid "First sector of the root partition" msgstr "根分割區的第一扇區" -#: any.pm:362 +#: any.pm:371 #, c-format msgid "On Floppy" msgstr "在軟碟機" -#: any.pm:364 pkgs.pm:289 ugtk2.pm:526 ugtk3.pm:600 +#: any.pm:373 pkgs.pm:290 ugtk2.pm:526 ugtk3.pm:600 #, c-format msgid "Skip" msgstr "略過" -#: any.pm:392 +#: any.pm:401 #, c-format msgid "Boot Style Configuration" msgstr "開機樣式組態設定" -#: any.pm:396 +#: any.pm:405 #, c-format msgid "EFI System Partition" msgstr "EFI 系統分割區" -#: any.pm:411 +#: any.pm:420 #, c-format msgid "Bootloader main options" msgstr "開機載入程式主要選項" -#: any.pm:415 +#: any.pm:424 #, c-format msgid "Bootloader" msgstr "開機載入器" -#: any.pm:416 +#: any.pm:425 #, c-format msgid "Bootloader to use" msgstr "要用的開機載入程式" -#: any.pm:418 +#: any.pm:427 #, c-format msgid "Boot device" msgstr "開機裝置" -#: any.pm:420 +#: any.pm:429 #, c-format msgid "Main options" msgstr "主要選項" -#: any.pm:421 +#: any.pm:430 #, c-format msgid "Delay before booting default image" msgstr "以預設的核心影像開機之前等待的時間" -#: any.pm:422 +#: any.pm:431 #, c-format msgid "Enable ACPI" msgstr "啟用 ACPI" -#: any.pm:423 +#: any.pm:432 #, c-format msgid "Enable SMP" msgstr "啟用 SMP" -#: any.pm:424 +#: any.pm:433 #, c-format msgid "Enable APIC" msgstr "啟用 APIC" -#: any.pm:426 +#: any.pm:435 #, c-format msgid "Enable Local APIC" msgstr "啟用本地 APIC" -#: any.pm:427 security/level.pm:63 +#: any.pm:436 security/level.pm:63 #, c-format msgid "Security" msgstr "安全性" -#: any.pm:428 any.pm:1034 any.pm:1053 authentication.pm:249 +#: any.pm:437 any.pm:1050 any.pm:1069 authentication.pm:249 #: diskdrake/smbnfs_gtk.pm:181 #, c-format msgid "Password" msgstr "密碼" -#: any.pm:431 authentication.pm:260 +#: any.pm:440 authentication.pm:260 #, c-format msgid "The passwords do not match" msgstr "密碼不符合" -#: any.pm:431 authentication.pm:260 diskdrake/interactive.pm:1513 +#: any.pm:440 authentication.pm:260 diskdrake/interactive.pm:1543 #, c-format msgid "Please try again" msgstr "請再試一次" -#: any.pm:433 +#: any.pm:442 #, c-format msgid "You cannot use a password with %s" msgstr "您不能在密碼中使用 %s" -#: any.pm:437 any.pm:1037 any.pm:1055 authentication.pm:250 +#: any.pm:446 any.pm:1053 any.pm:1071 authentication.pm:250 #, c-format msgid "Password (again)" msgstr "密碼 (再一次)" -#: any.pm:505 any.pm:672 any.pm:715 +#: any.pm:514 any.pm:681 any.pm:724 #, c-format msgid "Bootloader Configuration" msgstr "開機載入程式組態設定" -#: any.pm:509 +#: any.pm:518 #, c-format msgid "Install or update rEFInd in the EFI system partition" msgstr "在 EFI 系統分割區中安裝或更新 eEFInd" -#: any.pm:511 -#, c-format -msgid "Install in /EFI/BOOT (workaround for some BIOSs)" +#: any.pm:520 any.pm:744 +#, fuzzy, c-format +msgid "Install in /EFI/BOOT (removable device or workaround for some BIOSs)" msgstr "安裝到 /EFI/BOOT (適用於某些 BIOSs)" -#: any.pm:551 any.pm:576 diskdrake/interactive.pm:411 +#: any.pm:560 any.pm:585 diskdrake/interactive.pm:411 #, c-format msgid "Label" msgstr "標籤" -#: any.pm:552 any.pm:560 any.pm:721 +#: any.pm:561 any.pm:569 any.pm:730 #, c-format msgid "Append" msgstr "附加參數" -#: any.pm:553 any.pm:565 any.pm:722 +#: any.pm:562 any.pm:574 any.pm:731 #, c-format msgid "Video mode" msgstr "顯示模式" -#: any.pm:558 +#: any.pm:567 #, c-format msgid "Image" msgstr "核心影像" -#: any.pm:559 any.pm:571 +#: any.pm:568 any.pm:580 #, c-format msgid "Root" msgstr "根目錄" -#: any.pm:562 +#: any.pm:571 #, c-format msgid "Xen append" msgstr "Xen 附加參數" -#: any.pm:564 +#: any.pm:573 #, c-format msgid "Requires password to boot" msgstr "開機需要密碼" -#: any.pm:566 +#: any.pm:575 #, c-format msgid "Initrd" msgstr "Initrd" -#: any.pm:567 +#: any.pm:576 #, c-format msgid "Network profile" msgstr "網路 profile" -#: any.pm:578 any.pm:719 harddrake/v4l.pm:438 +#: any.pm:587 any.pm:728 harddrake/v4l.pm:438 #, c-format msgid "Default" msgstr "預設" -#: any.pm:586 +#: any.pm:595 #, c-format msgid "Empty label not allowed" msgstr "不允許空白標籤" -#: any.pm:587 +#: any.pm:596 #, c-format msgid "You must specify a kernel image" msgstr "您需要指定一個核心影像" -#: any.pm:587 +#: any.pm:596 #, c-format msgid "You must specify a root partition" msgstr "您需要指定一個 root 分割區" -#: any.pm:588 +#: any.pm:597 #, c-format msgid "This label is already used" msgstr "這個標籤已經被用過了" -#: any.pm:612 +#: any.pm:621 #, c-format msgid "Which type of entry do you want to add?" msgstr "您要新增哪一類的項目？" -#: any.pm:613 +#: any.pm:622 #, c-format msgid "Linux" msgstr "Linux" -#: any.pm:613 +#: any.pm:622 #, c-format msgid "Other OS (Windows...)" msgstr "其他作業系統 (Windows...)" -#: any.pm:673 +#: any.pm:682 #, c-format msgid "" "Here are the entries on your boot menu so far.\n" @@ -304,235 +304,235 @@ msgstr "" "目前有這些選項在您的開機選單中。\n" "您可以建立更多的選項或修改既有的選項。" -#: any.pm:724 +#: any.pm:733 #, c-format msgid "Do not touch ESP or MBR" msgstr "不異動 ESP 或 MBR" -#: any.pm:726 diskdrake/dav.pm:106 diskdrake/hd_gtk.pm:460 +#: any.pm:735 diskdrake/dav.pm:106 diskdrake/hd_gtk.pm:460 #: diskdrake/interactive.pm:305 diskdrake/interactive.pm:391 -#: diskdrake/interactive.pm:605 diskdrake/interactive.pm:820 -#: diskdrake/interactive.pm:885 diskdrake/interactive.pm:1053 -#: diskdrake/interactive.pm:1095 diskdrake/interactive.pm:1096 -#: diskdrake/interactive.pm:1329 diskdrake/interactive.pm:1367 -#: diskdrake/interactive.pm:1512 do_pkgs.pm:45 do_pkgs.pm:74 do_pkgs.pm:100 +#: diskdrake/interactive.pm:605 diskdrake/interactive.pm:847 +#: diskdrake/interactive.pm:912 diskdrake/interactive.pm:1083 +#: diskdrake/interactive.pm:1125 diskdrake/interactive.pm:1126 +#: diskdrake/interactive.pm:1359 diskdrake/interactive.pm:1397 +#: diskdrake/interactive.pm:1542 do_pkgs.pm:45 do_pkgs.pm:74 do_pkgs.pm:100 #: do_pkgs.pm:137 #, c-format msgid "Warning" msgstr "警告" -#: any.pm:727 +#: any.pm:736 #, c-format msgid "" "Not installing on ESP or MBR means that the installation is not bootable " "unless chain loaded from another OS!" msgstr "不安裝在 ESP 或 MBR 表示除非從其他作業系統引導否則安裝後將無法啟動！" -#: any.pm:731 +#: any.pm:740 #, c-format msgid "Probe Foreign OS" msgstr "偵測其他的作業系統" -#: any.pm:732 +#: any.pm:741 #, c-format msgid "" "If grub2 takes too long to install, you can use this option to skip " "detecting other OSes and make it fast" msgstr "如果 grub2 花太久時間安裝，您可以用這個選項跳過偵測其他系統來加快速度" -#: any.pm:993 +#: any.pm:1009 #, c-format msgid "access to X programs" msgstr "存取 X 程式" -#: any.pm:994 +#: any.pm:1010 #, c-format msgid "access to rpm tools" msgstr "存取 RPM 工具程式" -#: any.pm:995 +#: any.pm:1011 #, c-format msgid "allow \"su\"" msgstr "允許 \"su\"" -#: any.pm:996 +#: any.pm:1012 #, c-format msgid "access to administrative files" msgstr "存取系統管理者權限的檔案" -#: any.pm:997 +#: any.pm:1013 #, c-format msgid "access to network tools" msgstr "存取網路工具" -#: any.pm:998 +#: any.pm:1014 #, c-format msgid "access to compilation tools" msgstr "存取編譯工具" -#: any.pm:1004 +#: any.pm:1020 #, c-format msgid "(already added %s)" msgstr "( %s 已經加入)" -#: any.pm:1010 +#: any.pm:1026 #, c-format msgid "Please give a user name" msgstr "請輸入使用者名稱" -#: any.pm:1011 +#: any.pm:1027 #, c-format msgid "" "The user name must start with a lower case letter followed by only lower " "cased letters, numbers, `-' and `_'" msgstr "使用者名稱只能由小寫英文字母開頭，並接著小寫英文字母、數字、- 與 _" -#: any.pm:1012 +#: any.pm:1028 #, c-format msgid "The user name is too long" msgstr "這個使用者名稱太長了" -#: any.pm:1013 +#: any.pm:1029 #, c-format msgid "This user name has already been added" msgstr "這個使用者已經加入過了" -#: any.pm:1019 any.pm:1057 +#: any.pm:1035 any.pm:1073 #, c-format msgid "User ID" msgstr "使用者 ID" -#: any.pm:1019 any.pm:1058 +#: any.pm:1035 any.pm:1074 #, c-format msgid "Group ID" msgstr "群組 ID" -#: any.pm:1020 +#: any.pm:1036 #, c-format msgid "%s must be a number" msgstr "%s 必須是數字" -#: any.pm:1021 +#: any.pm:1037 #, c-format msgid "%s should be above 1000. Accept anyway?" msgstr "%s 必須大於 1000。還是要接受嗎？" -#: any.pm:1025 +#: any.pm:1041 #, c-format msgid "User management" msgstr "使用者管理" -#: any.pm:1031 +#: any.pm:1047 #, c-format msgid "Enable guest account" msgstr "啟用訪客帳戶" -#: any.pm:1033 authentication.pm:236 +#: any.pm:1049 authentication.pm:236 #, c-format msgid "Set administrator (root) password" msgstr "設定管理者 (root) 密碼" -#: any.pm:1039 +#: any.pm:1055 #, c-format msgid "Enter a user" msgstr "輸入一位使用者" -#: any.pm:1041 +#: any.pm:1057 #, c-format msgid "Icon" msgstr "圖示" -#: any.pm:1044 +#: any.pm:1060 #, c-format msgid "Real name" msgstr "真實名稱" -#: any.pm:1051 +#: any.pm:1067 #, c-format msgid "Login name" msgstr "登入名稱" -#: any.pm:1056 +#: any.pm:1072 #, c-format msgid "Shell" msgstr "Shell" -#: any.pm:1060 +#: any.pm:1076 #, c-format msgid "Extra Groups:" msgstr "其他群組：" -#: any.pm:1113 +#: any.pm:1129 #, c-format msgid "Please wait, adding media..." msgstr "請稍後，新增媒體中..." -#: any.pm:1165 security/l10n.pm:14 +#: any.pm:1181 security/l10n.pm:14 #, c-format msgid "Autologin" msgstr "自動登入" -#: any.pm:1166 +#: any.pm:1182 #, c-format msgid "I can set up your computer to automatically log on one user." msgstr "我能夠設定您的電腦自動以某個使用者身份登入系統。" -#: any.pm:1167 +#: any.pm:1183 #, c-format msgid "Use this feature" msgstr "使用此功能" -#: any.pm:1168 +#: any.pm:1184 #, c-format msgid "Choose the default user:" msgstr "選取預設的使用者：" -#: any.pm:1169 +#: any.pm:1185 #, c-format msgid "Choose the window manager to run:" msgstr "選取您想使用的視窗管理程式：" -#: any.pm:1180 any.pm:1195 any.pm:1264 +#: any.pm:1196 any.pm:1211 any.pm:1280 #, c-format msgid "Release Notes" msgstr "發行紀錄" -#: any.pm:1202 any.pm:1566 interactive/gtk.pm:820 +#: any.pm:1218 any.pm:1582 interactive/gtk.pm:820 #, c-format msgid "Close" msgstr "關閉" -#: any.pm:1250 +#: any.pm:1266 #, c-format msgid "License agreement" msgstr "版權協議" -#: any.pm:1252 diskdrake/dav.pm:26 mygtk2.pm:1229 mygtk3.pm:1312 +#: any.pm:1268 diskdrake/dav.pm:26 mygtk2.pm:1229 mygtk3.pm:1312 #, c-format msgid "Quit" msgstr "離開" -#: any.pm:1259 +#: any.pm:1275 #, c-format msgid "Do you accept this license ?" msgstr "您接受這份授權嗎？" -#: any.pm:1260 +#: any.pm:1276 #, c-format msgid "Accept" msgstr "接受" -#: any.pm:1260 +#: any.pm:1276 #, c-format msgid "Refuse" msgstr "拒絕" -#: any.pm:1286 any.pm:1349 +#: any.pm:1302 any.pm:1365 #, c-format msgid "Please choose a language to use" msgstr "請選擇要使用那個語言。" -#: any.pm:1314 +#: any.pm:1330 #, c-format msgid "" "%s can support multiple languages. Select\n" @@ -542,87 +542,87 @@ msgstr "" "%s 可以支援多重語言。請選擇您要安裝的語言。這些語言在安裝完成並重新啟動系統後" "即可使用。" -#: any.pm:1316 fs/partitioning_wizard.pm:194 +#: any.pm:1332 fs/partitioning_wizard.pm:208 #, c-format msgid "Mageia" msgstr "Mageia" -#: any.pm:1317 +#: any.pm:1333 #, c-format msgid "Multiple languages" msgstr "多語系" -#: any.pm:1318 +#: any.pm:1334 #, c-format msgid "Select Additional Languages" msgstr "選擇更多語言" -#: any.pm:1327 any.pm:1358 +#: any.pm:1343 any.pm:1374 #, c-format msgid "Old compatibility (non UTF-8) encoding" msgstr "舊式相容 (非 UTF-8) 編碼" -#: any.pm:1328 +#: any.pm:1344 #, c-format msgid "All languages" msgstr "所有語言" -#: any.pm:1350 +#: any.pm:1366 #, c-format msgid "Language choice" msgstr "語言選擇" -#: any.pm:1404 +#: any.pm:1420 #, c-format msgid "Country / Region" msgstr "國家/地區" -#: any.pm:1405 +#: any.pm:1421 #, c-format msgid "Please choose your country" msgstr "請選擇您的國家。" -#: any.pm:1407 +#: any.pm:1423 #, c-format msgid "Here is the full list of available countries" msgstr "以下是全部可用的所有的國家清單" -#: any.pm:1408 +#: any.pm:1424 #, c-format msgid "Other Countries" msgstr "其他國家" -#: any.pm:1408 interactive.pm:491 interactive/gtk.pm:444 +#: any.pm:1424 interactive.pm:491 interactive/gtk.pm:444 #, c-format msgid "Advanced" msgstr "進階" -#: any.pm:1414 +#: any.pm:1430 #, c-format msgid "Input method:" msgstr "輸入法：" -#: any.pm:1417 +#: any.pm:1433 #, c-format msgid "None" msgstr "無" -#: any.pm:1511 +#: any.pm:1527 #, c-format msgid "No sharing" msgstr "不分享" -#: any.pm:1511 +#: any.pm:1527 #, c-format msgid "Allow all users" msgstr "允許所有使用者" -#: any.pm:1511 +#: any.pm:1527 #, c-format msgid "Custom" msgstr "自訂" -#: any.pm:1515 +#: any.pm:1531 #, c-format msgid "" "Would you like to allow users to share some of their directories?\n" @@ -637,32 +637,32 @@ msgstr "" "\n" "\"自訂\" 允許每一個使用者自行設定。\n" -#: any.pm:1527 +#: any.pm:1543 #, c-format msgid "" "NFS: the traditional Unix file sharing system, with less support on Mac and " "Windows." msgstr "NFS：傳統的 Unix 檔案分享系統，但 Mac 與 Windows 的支援較不足。" -#: any.pm:1530 +#: any.pm:1546 #, c-format msgid "" "SMB: a file sharing system used by Windows, Mac OS X and many modern Linux " "systems." msgstr "SMB：一個 Windows、Mac OS X 與許多先進的 Linux 系統用的檔案分享系統。" -#: any.pm:1538 +#: any.pm:1554 #, c-format msgid "" "You can export using NFS or SMB. Please select which you would like to use." msgstr "您能夠用 NFS 或者是 SMB 匯出。請選擇您想要用那一個。" -#: any.pm:1566 +#: any.pm:1582 #, c-format msgid "Launch userdrake" msgstr "啟動 userdrake" -#: any.pm:1568 +#: any.pm:1584 #, c-format msgid "" "The per-user sharing uses the group \"fileshare\". \n" @@ -671,54 +671,54 @@ msgstr "" "每個使用者的分享都是使用 \"fileshare\" 群組。\n" "您可以執行 userdrake 在該群組內加入使用者。" -#: any.pm:1675 +#: any.pm:1691 #, c-format msgid "" "You need to logout and back in again for changes to take effect. Press OK to " "logout now." msgstr "您必須登出之後重新登入才能讓變動生效。馬上登出請按下確定。" -#: any.pm:1679 +#: any.pm:1695 #, c-format msgid "You need to log out and back in again for changes to take effect" msgstr "您必須登出之後重新登入才能讓變動生效" -#: any.pm:1714 +#: any.pm:1730 #, c-format msgid "Timezone" msgstr "時區" -#: any.pm:1714 +#: any.pm:1730 #, c-format msgid "Which is your timezone?" msgstr "您的時區為何？" -#: any.pm:1737 any.pm:1739 +#: any.pm:1753 any.pm:1755 #, c-format msgid "Date, Clock & Time Zone Settings" msgstr "日期、時間與時區設定" -#: any.pm:1740 +#: any.pm:1756 #, c-format msgid "What is the best time?" msgstr "最佳的時間是哪一個？" -#: any.pm:1744 +#: any.pm:1760 #, c-format msgid "%s (hardware clock set to UTC)" msgstr "%s (硬體時鐘設定為 UTC 時間)" -#: any.pm:1745 +#: any.pm:1761 #, c-format msgid "%s (hardware clock set to local time)" msgstr "%s (硬體時鐘設定為本地時間)" -#: any.pm:1747 +#: any.pm:1763 #, c-format msgid "NTP Server" msgstr "NTP 伺服器" -#: any.pm:1748 +#: any.pm:1764 #, c-format msgid "Automatic time synchronization (using NTP)" msgstr "自動時間同步 (使用 NTP 服務)" @@ -1098,21 +1098,21 @@ msgstr "U-Boot/Extlinux 文字介面選單" msgid "not enough room in /boot" msgstr "/boot 沒有足夠的空間" -#: bootloader.pm:2680 +#: bootloader.pm:2686 #, c-format msgid "" "Your bootloader configuration must be updated because partition has been " "renumbered" msgstr "因為您的分割區被重新編號過，所以開機載入程式的設定必須更新" -#: bootloader.pm:2693 +#: bootloader.pm:2699 #, c-format msgid "" "The bootloader cannot be installed correctly. You have to boot rescue and " "choose \"%s\"" msgstr "開機載入器無法正確安裝。您必須開機到救援模式並選擇 %s。" -#: bootloader.pm:2694 +#: bootloader.pm:2700 #, c-format msgid "Re-install Boot Loader" msgstr "重新安裝開機載入程式" @@ -1204,7 +1204,7 @@ msgid "Mount point" msgstr "掛載點" #: diskdrake/dav.pm:67 diskdrake/interactive.pm:410 -#: diskdrake/interactive.pm:1182 diskdrake/removable.pm:24 +#: diskdrake/interactive.pm:1212 diskdrake/removable.pm:24 #: diskdrake/smbnfs_gtk.pm:80 #, c-format msgid "Options" @@ -1225,12 +1225,12 @@ msgstr "完成" #: diskdrake/interactive.pm:246 diskdrake/interactive.pm:259 #: diskdrake/interactive.pm:460 diskdrake/interactive.pm:535 #: diskdrake/interactive.pm:553 diskdrake/interactive.pm:558 -#: diskdrake/interactive.pm:717 diskdrake/interactive.pm:1020 -#: diskdrake/interactive.pm:1073 diskdrake/interactive.pm:1229 -#: diskdrake/interactive.pm:1242 diskdrake/interactive.pm:1245 -#: diskdrake/interactive.pm:1513 diskdrake/smbnfs_gtk.pm:42 do_pkgs.pm:49 +#: diskdrake/interactive.pm:717 diskdrake/interactive.pm:1050 +#: diskdrake/interactive.pm:1103 diskdrake/interactive.pm:1259 +#: diskdrake/interactive.pm:1272 diskdrake/interactive.pm:1275 +#: diskdrake/interactive.pm:1543 diskdrake/smbnfs_gtk.pm:42 do_pkgs.pm:49 #: do_pkgs.pm:54 do_pkgs.pm:79 do_pkgs.pm:103 do_pkgs.pm:108 do_pkgs.pm:142 -#: fsedit.pm:264 interactive/http.pm:117 interactive/http.pm:118 +#: fsedit.pm:268 interactive/http.pm:117 interactive/http.pm:118 #: modules/interactive.pm:19 scanner.pm:94 scanner.pm:105 scanner.pm:112 #: scanner.pm:119 wizards.pm:95 wizards.pm:99 wizards.pm:121 #, c-format @@ -1258,22 +1258,22 @@ msgid "Server: " msgstr "伺服器：" #: diskdrake/dav.pm:125 diskdrake/interactive.pm:505 -#: diskdrake/interactive.pm:1391 diskdrake/interactive.pm:1473 +#: diskdrake/interactive.pm:1421 diskdrake/interactive.pm:1503 #, c-format msgid "Mount point: " msgstr "掛載點：" -#: diskdrake/dav.pm:126 diskdrake/interactive.pm:1480 +#: diskdrake/dav.pm:126 diskdrake/interactive.pm:1510 #, c-format msgid "Options: %s" msgstr "選項： %s" #: diskdrake/hd_gtk.pm:61 diskdrake/interactive.pm:300 #: diskdrake/smbnfs_gtk.pm:22 fs/mount_point.pm:113 -#: fs/partitioning_wizard.pm:66 fs/partitioning_wizard.pm:264 -#: fs/partitioning_wizard.pm:272 fs/partitioning_wizard.pm:310 -#: fs/partitioning_wizard.pm:466 fs/partitioning_wizard.pm:529 -#: fs/partitioning_wizard.pm:614 fs/partitioning_wizard.pm:617 +#: fs/partitioning_wizard.pm:80 fs/partitioning_wizard.pm:278 +#: fs/partitioning_wizard.pm:286 fs/partitioning_wizard.pm:324 +#: fs/partitioning_wizard.pm:480 fs/partitioning_wizard.pm:543 +#: fs/partitioning_wizard.pm:628 fs/partitioning_wizard.pm:631 #, c-format msgid "Partitioning" msgstr "分割磁區" @@ -1283,8 +1283,8 @@ msgstr "分割磁區" msgid "Click on a partition, choose a filesystem type then choose an action" msgstr "點選一個分割區，選擇檔案系統類型然後選擇一個動作" -#: diskdrake/hd_gtk.pm:133 diskdrake/interactive.pm:1203 -#: diskdrake/interactive.pm:1213 diskdrake/interactive.pm:1267 +#: diskdrake/hd_gtk.pm:133 diskdrake/interactive.pm:1233 +#: diskdrake/interactive.pm:1243 diskdrake/interactive.pm:1297 #, c-format msgid "Read carefully" msgstr "仔細閱讀！" @@ -1304,7 +1304,7 @@ msgstr "離開" msgid "Continue" msgstr "繼續" -#: diskdrake/hd_gtk.pm:216 fs/partitioning_wizard.pm:590 interactive.pm:778 +#: diskdrake/hd_gtk.pm:216 fs/partitioning_wizard.pm:604 interactive.pm:778 #: interactive/gtk.pm:812 interactive/gtk.pm:830 interactive/gtk.pm:862 #: ugtk2.pm:934 ugtk3.pm:1030 #, c-format @@ -1347,28 +1347,28 @@ msgstr "未知的" msgid "Ext4" msgstr "Ext4" -#: diskdrake/hd_gtk.pm:431 fs/partitioning_wizard.pm:436 +#: diskdrake/hd_gtk.pm:431 fs/partitioning_wizard.pm:450 #, c-format msgid "XFS" msgstr "XFS" -#: diskdrake/hd_gtk.pm:431 fs/partitioning_wizard.pm:436 +#: diskdrake/hd_gtk.pm:431 fs/partitioning_wizard.pm:450 #, c-format msgid "Swap" msgstr "Swap" -#: diskdrake/hd_gtk.pm:431 fs/partitioning_wizard.pm:436 +#: diskdrake/hd_gtk.pm:431 fs/partitioning_wizard.pm:450 #, c-format msgid "Windows" msgstr "Windows" -#: diskdrake/hd_gtk.pm:432 fs/partitioning_wizard.pm:437 services.pm:201 +#: diskdrake/hd_gtk.pm:432 fs/partitioning_wizard.pm:451 services.pm:201 #, c-format msgid "Other" msgstr "其他" -#: diskdrake/hd_gtk.pm:432 diskdrake/interactive.pm:1397 -#: fs/partitioning_wizard.pm:437 +#: diskdrake/hd_gtk.pm:432 diskdrake/interactive.pm:1427 +#: fs/partitioning_wizard.pm:451 #, c-format msgid "Empty" msgstr "空白" @@ -1417,7 +1417,7 @@ msgid "More" msgstr "更多" #: diskdrake/interactive.pm:280 diskdrake/interactive.pm:293 -#: diskdrake/interactive.pm:1313 mygtk2.pm:1228 mygtk3.pm:1311 +#: diskdrake/interactive.pm:1343 mygtk2.pm:1228 mygtk3.pm:1311 #, c-format msgid "Confirmation" msgstr "確認" @@ -1442,7 +1442,7 @@ msgstr "放棄寫入硬碟分割表就離開？" msgid "Do you want to save the /etc/fstab modifications?" msgstr "您確定要儲存 /etc/fstab 的變更嗎？" -#: diskdrake/interactive.pm:300 fs/partitioning_wizard.pm:310 +#: diskdrake/interactive.pm:300 fs/partitioning_wizard.pm:324 #, c-format msgid "You need to reboot for the partition table modifications to take effect" msgstr "您需要重新開機，對分割表所做的變更才會生效" @@ -1515,7 +1515,7 @@ msgstr "詳細資訊" msgid "View" msgstr "檢視" -#: diskdrake/interactive.pm:412 diskdrake/interactive.pm:833 +#: diskdrake/interactive.pm:412 diskdrake/interactive.pm:860 #, c-format msgid "Resize" msgstr "重新變更大小" @@ -1525,12 +1525,12 @@ msgstr "重新變更大小" msgid "Format" msgstr "格式化" -#: diskdrake/interactive.pm:415 diskdrake/interactive.pm:983 +#: diskdrake/interactive.pm:415 diskdrake/interactive.pm:1013 #, c-format msgid "Add to RAID" msgstr "加入到磁碟陣列" -#: diskdrake/interactive.pm:416 diskdrake/interactive.pm:1002 +#: diskdrake/interactive.pm:416 diskdrake/interactive.pm:1032 #, c-format msgid "Add to LVM" msgstr "加入到 LVM" @@ -1590,12 +1590,12 @@ msgstr "建立新的分割區" msgid "Start sector: " msgstr "開始的磁區：" -#: diskdrake/interactive.pm:501 diskdrake/interactive.pm:1088 +#: diskdrake/interactive.pm:501 diskdrake/interactive.pm:1118 #, c-format msgid "Size in MB: " msgstr "大小 (MB)：" -#: diskdrake/interactive.pm:503 diskdrake/interactive.pm:1089 +#: diskdrake/interactive.pm:503 diskdrake/interactive.pm:1119 #, c-format msgid "Filesystem type: " msgstr "檔案系統格式：" @@ -1620,12 +1620,12 @@ msgstr "加密分割區" msgid "Encryption key " msgstr "加密金鑰" -#: diskdrake/interactive.pm:520 diskdrake/interactive.pm:1517 +#: diskdrake/interactive.pm:520 diskdrake/interactive.pm:1547 #, c-format msgid "Encryption key (again)" msgstr "再次輸入加密金鑰" -#: diskdrake/interactive.pm:532 diskdrake/interactive.pm:1513 +#: diskdrake/interactive.pm:532 diskdrake/interactive.pm:1543 #, c-format msgid "The encryption keys do not match" msgstr "輸入的加密金鑰不符合" @@ -1721,53 +1721,53 @@ msgstr "" msgid "Where do you want to mount %s?" msgstr "您要將 %s 掛載在那裡？" -#: diskdrake/interactive.pm:778 diskdrake/interactive.pm:874 -#: fs/partitioning_wizard.pm:151 fs/partitioning_wizard.pm:233 +#: diskdrake/interactive.pm:798 diskdrake/interactive.pm:901 +#: fs/partitioning_wizard.pm:165 fs/partitioning_wizard.pm:247 #, c-format msgid "Resizing" msgstr "正在重設大小" -#: diskdrake/interactive.pm:778 +#: diskdrake/interactive.pm:798 #, c-format msgid "Computing FAT filesystem bounds" msgstr "正在計算 FAT 分割區的邊界" -#: diskdrake/interactive.pm:820 +#: diskdrake/interactive.pm:847 #, c-format msgid "This partition is not resizeable" msgstr "這個分割區無法重新調整大小" -#: diskdrake/interactive.pm:825 +#: diskdrake/interactive.pm:852 #, c-format msgid "All data on this partition should be backed up" msgstr "所有此分割區的資料都應該先備份" -#: diskdrake/interactive.pm:827 +#: diskdrake/interactive.pm:854 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "在改變分割區 %s 的大小以後，所有在這個分割區上的資料都會遺失" -#: diskdrake/interactive.pm:834 +#: diskdrake/interactive.pm:861 #, c-format msgid "Choose the new size" msgstr "選取新的大小" -#: diskdrake/interactive.pm:835 +#: diskdrake/interactive.pm:862 #, c-format msgid "New size in MB: " msgstr "新大小 (MB)：" -#: diskdrake/interactive.pm:836 +#: diskdrake/interactive.pm:863 #, c-format msgid "Minimum size: %s MB" msgstr "最小容量：%s MB" -#: diskdrake/interactive.pm:837 +#: diskdrake/interactive.pm:864 #, c-format msgid "Maximum size: %s MB" msgstr "最大容量：%s MB" -#: diskdrake/interactive.pm:885 fs/partitioning_wizard.pm:241 +#: diskdrake/interactive.pm:912 fs/partitioning_wizard.pm:255 #, c-format msgid "" "To ensure data integrity after resizing the partition(s),\n" @@ -1776,62 +1776,62 @@ msgstr "" "為確保重新調整分割區大小後的資料正確性，\n" " 您下次從 Microsoft Windows® 開機時會執行檔案系統檢查。 " -#: diskdrake/interactive.pm:951 diskdrake/interactive.pm:1508 +#: diskdrake/interactive.pm:981 diskdrake/interactive.pm:1538 #, c-format msgid "Filesystem encryption key" msgstr "檔案系統加密金鑰" -#: diskdrake/interactive.pm:952 +#: diskdrake/interactive.pm:982 #, c-format msgid "Enter your filesystem encryption key" msgstr "請輸入您檔案系統所使用的加密金鑰" -#: diskdrake/interactive.pm:953 diskdrake/interactive.pm:1516 +#: diskdrake/interactive.pm:983 diskdrake/interactive.pm:1546 #, c-format msgid "Encryption key" msgstr "加密金鑰" -#: diskdrake/interactive.pm:960 +#: diskdrake/interactive.pm:990 #, c-format msgid "Invalid key" msgstr "無效的金鑰" -#: diskdrake/interactive.pm:983 +#: diskdrake/interactive.pm:1013 #, c-format msgid "Choose an existing RAID to add to" msgstr "選取一存在的磁碟陣列加入到" -#: diskdrake/interactive.pm:985 diskdrake/interactive.pm:1004 +#: diskdrake/interactive.pm:1015 diskdrake/interactive.pm:1034 #, c-format msgid "new" msgstr "新增" -#: diskdrake/interactive.pm:1002 +#: diskdrake/interactive.pm:1032 #, c-format msgid "Choose an existing LVM to add to" msgstr "選取一個已經存在的 LVM 以加入" -#: diskdrake/interactive.pm:1014 diskdrake/interactive.pm:1023 +#: diskdrake/interactive.pm:1044 diskdrake/interactive.pm:1053 #, c-format msgid "LVM name" msgstr "LVM 名稱" -#: diskdrake/interactive.pm:1015 +#: diskdrake/interactive.pm:1045 #, c-format msgid "Enter a name for the new LVM volume group" msgstr "為新的 LVM 磁區群組輸入一個名稱" -#: diskdrake/interactive.pm:1020 +#: diskdrake/interactive.pm:1050 #, c-format msgid "\"%s\" already exists" msgstr "\"%s\" 已經存在了" -#: diskdrake/interactive.pm:1028 +#: diskdrake/interactive.pm:1058 #, c-format msgid "Setting up LVM" msgstr "設定 LVM" -#: diskdrake/interactive.pm:1053 +#: diskdrake/interactive.pm:1083 #, c-format msgid "" "Physical volume %s is still in use.\n" @@ -1840,117 +1840,117 @@ msgstr "" "實體磁區 %s 仍然在使用中。\n" "您要把位於這個磁區的實體延伸移到另一個磁區嗎？" -#: diskdrake/interactive.pm:1055 +#: diskdrake/interactive.pm:1085 #, c-format msgid "Moving physical extents" msgstr "移動實體延伸" -#: diskdrake/interactive.pm:1073 +#: diskdrake/interactive.pm:1103 #, c-format msgid "This partition cannot be used for loopback" msgstr "此分割區不能用於回送（loopback）" -#: diskdrake/interactive.pm:1086 +#: diskdrake/interactive.pm:1116 #, c-format msgid "Loopback" msgstr "Loopback" -#: diskdrake/interactive.pm:1087 +#: diskdrake/interactive.pm:1117 #, c-format msgid "Loopback file name: " msgstr "Loopback 檔案名稱：" -#: diskdrake/interactive.pm:1092 +#: diskdrake/interactive.pm:1122 #, c-format msgid "Give a file name" msgstr "輸入一個檔案名稱" -#: diskdrake/interactive.pm:1095 +#: diskdrake/interactive.pm:1125 #, c-format msgid "File is already used by another loopback, choose another one" msgstr "檔案已被用來作為其他的 loopback，請選擇其他檔案" -#: diskdrake/interactive.pm:1096 +#: diskdrake/interactive.pm:1126 #, c-format msgid "File already exists. Use it?" msgstr "檔案已經存在了。要使用它嗎？" -#: diskdrake/interactive.pm:1128 diskdrake/interactive.pm:1131 +#: diskdrake/interactive.pm:1158 diskdrake/interactive.pm:1161 #, c-format msgid "Mount options" msgstr "掛載參數" -#: diskdrake/interactive.pm:1138 +#: diskdrake/interactive.pm:1168 #, c-format msgid "Various" msgstr "各種的" -#: diskdrake/interactive.pm:1184 +#: diskdrake/interactive.pm:1214 #, c-format msgid "device" msgstr "裝置" -#: diskdrake/interactive.pm:1185 +#: diskdrake/interactive.pm:1215 #, c-format msgid "level" msgstr "階層" -#: diskdrake/interactive.pm:1186 +#: diskdrake/interactive.pm:1216 #, c-format msgid "chunk size in KiB" msgstr "組塊大小以 KiB 計量" -#: diskdrake/interactive.pm:1204 +#: diskdrake/interactive.pm:1234 #, c-format msgid "Be careful: this operation is dangerous." msgstr "請小心：這個動作很危險。" -#: diskdrake/interactive.pm:1220 +#: diskdrake/interactive.pm:1250 #, c-format msgid "Partitioning Type" msgstr "磁區格式" -#: diskdrake/interactive.pm:1220 +#: diskdrake/interactive.pm:1250 #, c-format msgid "What type of partitioning?" msgstr "以那種形式分割？" -#: diskdrake/interactive.pm:1258 +#: diskdrake/interactive.pm:1288 #, c-format msgid "You'll need to reboot before the modification can take effect" msgstr "您需要重新開機，變更才能生效" -#: diskdrake/interactive.pm:1267 +#: diskdrake/interactive.pm:1297 #, c-format msgid "Partition table of drive %s is going to be written to disk" msgstr "正在準備將要寫入磁碟 %s 的硬碟分割表！" -#: diskdrake/interactive.pm:1286 fs/format.pm:106 fs/format.pm:113 +#: diskdrake/interactive.pm:1316 fs/format.pm:172 fs/format.pm:179 #, c-format msgid "Formatting partition %s" msgstr "正在格式化分割區 %s" -#: diskdrake/interactive.pm:1299 +#: diskdrake/interactive.pm:1329 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "在對分割區 %s 進行格式化的動作以後，所有在這個分割區上的資料都會遺失" -#: diskdrake/interactive.pm:1313 fs/partitioning.pm:48 +#: diskdrake/interactive.pm:1343 fs/partitioning.pm:50 #, c-format msgid "Check for bad blocks?" msgstr "要檢查壞掉的磁區嗎？" -#: diskdrake/interactive.pm:1328 +#: diskdrake/interactive.pm:1358 #, c-format msgid "Move files to the new partition" msgstr "將檔案搬移到新的分割區" -#: diskdrake/interactive.pm:1328 +#: diskdrake/interactive.pm:1358 #, c-format msgid "Hide files" msgstr "隱藏檔案" -#: diskdrake/interactive.pm:1329 +#: diskdrake/interactive.pm:1359 #, c-format msgid "" "Directory %s already contains data\n" @@ -1966,127 +1966,127 @@ msgstr "" "您可以選擇把檔案移入要掛載到此的磁區中，或者把它們留在原地 (這會讓它們隱藏起" "來，而目錄中顯示出來的會是掛載上的磁區內容)" -#: diskdrake/interactive.pm:1344 +#: diskdrake/interactive.pm:1374 #, c-format msgid "Moving files to the new partition" msgstr "正在將檔案搬移到新的分割區" -#: diskdrake/interactive.pm:1348 +#: diskdrake/interactive.pm:1378 #, c-format msgid "Copying %s" msgstr "正在複製 %s" -#: diskdrake/interactive.pm:1352 +#: diskdrake/interactive.pm:1382 #, c-format msgid "Removing %s" msgstr "正在移除 %s" -#: diskdrake/interactive.pm:1366 +#: diskdrake/interactive.pm:1396 #, c-format msgid "partition %s is now known as %s" msgstr "分割區 %s 現在被命名為 %s 了" -#: diskdrake/interactive.pm:1367 +#: diskdrake/interactive.pm:1397 #, c-format msgid "Partitions have been renumbered: " msgstr "分割區已經重新編號：" -#: diskdrake/interactive.pm:1392 diskdrake/interactive.pm:1457 +#: diskdrake/interactive.pm:1422 diskdrake/interactive.pm:1487 #, c-format msgid "Device: " msgstr "裝置：" -#: diskdrake/interactive.pm:1393 +#: diskdrake/interactive.pm:1423 #, c-format msgid "Volume label: " msgstr "磁區標籤：" -#: diskdrake/interactive.pm:1394 +#: diskdrake/interactive.pm:1424 #, c-format msgid "UUID: " msgstr "UUID:" -#: diskdrake/interactive.pm:1395 +#: diskdrake/interactive.pm:1425 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "DOS 磁碟代號：%s (猜測值)\n" -#: diskdrake/interactive.pm:1399 diskdrake/interactive.pm:1476 +#: diskdrake/interactive.pm:1429 diskdrake/interactive.pm:1506 #, c-format msgid "Type: " msgstr "格式：" -#: diskdrake/interactive.pm:1401 +#: diskdrake/interactive.pm:1431 #, c-format msgid "Start: sector %s\n" msgstr "始於：第 %s 扇區\n" -#: diskdrake/interactive.pm:1403 +#: diskdrake/interactive.pm:1433 #, c-format msgid "Size: %s (%s%% of disk)" msgstr "大小：%s (磁碟的 %s%%)" -#: diskdrake/interactive.pm:1405 +#: diskdrake/interactive.pm:1435 #, c-format msgid "Size: %s" msgstr "大小：%s" -#: diskdrake/interactive.pm:1407 +#: diskdrake/interactive.pm:1437 #, c-format msgid ", %s sectors" msgstr "，%s 扇區" -#: diskdrake/interactive.pm:1409 +#: diskdrake/interactive.pm:1439 #, c-format msgid "Cylinder %d to %d\n" msgstr "%d 磁柱到第 %d 磁柱\n" -#: diskdrake/interactive.pm:1410 +#: diskdrake/interactive.pm:1440 #, c-format msgid "Number of logical extents: %d\n" msgstr "邏輯延伸的數目：%d\n" -#: diskdrake/interactive.pm:1411 +#: diskdrake/interactive.pm:1441 #, c-format msgid "Formatted\n" msgstr "已格式化\n" -#: diskdrake/interactive.pm:1412 +#: diskdrake/interactive.pm:1442 #, c-format msgid "Not formatted\n" msgstr "未格式化\n" -#: diskdrake/interactive.pm:1413 +#: diskdrake/interactive.pm:1443 #, c-format msgid "Mounted\n" msgstr "已掛載\n" -#: diskdrake/interactive.pm:1414 +#: diskdrake/interactive.pm:1444 #, c-format msgid "RAID %s\n" msgstr "磁碟陣列 %s\n" -#: diskdrake/interactive.pm:1416 +#: diskdrake/interactive.pm:1446 #, c-format msgid "Encrypted" msgstr "已加密" -#: diskdrake/interactive.pm:1418 +#: diskdrake/interactive.pm:1448 #, c-format msgid " (mapped on %s)" msgstr "(映射於 %s)" -#: diskdrake/interactive.pm:1419 +#: diskdrake/interactive.pm:1449 #, c-format msgid " (to map on %s)" msgstr "(要映射於 %s)" -#: diskdrake/interactive.pm:1420 +#: diskdrake/interactive.pm:1450 #, c-format msgid " (inactive)" msgstr "(未啟動)" -#: diskdrake/interactive.pm:1427 +#: diskdrake/interactive.pm:1457 #, c-format msgid "" "Loopback file(s):\n" @@ -2095,7 +2095,7 @@ msgstr "" "loopback 檔案：\n" " %s\n" -#: diskdrake/interactive.pm:1428 +#: diskdrake/interactive.pm:1458 #, c-format msgid "" "Partition booted by default\n" @@ -2104,27 +2104,27 @@ msgstr "" "預設開機的分割區\n" " (給 MS-DOS 開機程式用的，跟 lilo 無關)\n" -#: diskdrake/interactive.pm:1430 +#: diskdrake/interactive.pm:1460 #, c-format msgid "Level %s\n" msgstr "階層 %s\n" -#: diskdrake/interactive.pm:1431 +#: diskdrake/interactive.pm:1461 #, c-format msgid "Chunk size %d KiB\n" msgstr "組塊大小 %d KiB\n" -#: diskdrake/interactive.pm:1432 +#: diskdrake/interactive.pm:1462 #, c-format msgid "RAID-disks %s\n" msgstr "磁碟陣列-磁碟 %s\n" -#: diskdrake/interactive.pm:1434 +#: diskdrake/interactive.pm:1464 #, c-format msgid "Loopback file name: %s" msgstr "Loopback 檔案名稱： %s" -#: diskdrake/interactive.pm:1437 +#: diskdrake/interactive.pm:1467 #, c-format msgid "" "\n" @@ -2137,7 +2137,7 @@ msgstr "" "是透過驅動程式產生出來的\n" "您應該不要去異動這個分割區資料。\n" -#: diskdrake/interactive.pm:1440 +#: diskdrake/interactive.pm:1470 #, c-format msgid "" "\n" @@ -2149,62 +2149,62 @@ msgstr "" "這個特殊分割區是用來作為\n" "雙重開機使用的。\n" -#: diskdrake/interactive.pm:1449 +#: diskdrake/interactive.pm:1479 #, c-format msgid "Free space on %s (%s)" msgstr "%s 上的可用空間 (%s)" -#: diskdrake/interactive.pm:1458 +#: diskdrake/interactive.pm:1488 #, c-format msgid "Read-only" msgstr "唯讀" -#: diskdrake/interactive.pm:1459 +#: diskdrake/interactive.pm:1489 #, c-format msgid "Size: %s\n" msgstr "大小：%s\n" -#: diskdrake/interactive.pm:1460 +#: diskdrake/interactive.pm:1490 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "幾何：%s 磁柱，%s 讀寫頭，%s 扇區\n" -#: diskdrake/interactive.pm:1461 +#: diskdrake/interactive.pm:1491 #, c-format msgid "Name: " msgstr "名稱：" -#: diskdrake/interactive.pm:1462 +#: diskdrake/interactive.pm:1492 #, c-format msgid "Medium type: " msgstr "媒體型式：" -#: diskdrake/interactive.pm:1463 +#: diskdrake/interactive.pm:1493 #, c-format msgid "LVM-disks %s\n" msgstr "LVM-磁碟 %s\n" -#: diskdrake/interactive.pm:1464 +#: diskdrake/interactive.pm:1494 #, c-format msgid "Partition table type: %s\n" msgstr "硬碟分割表形式：%s\n" -#: diskdrake/interactive.pm:1465 +#: diskdrake/interactive.pm:1495 #, c-format msgid "on channel %d id %d\n" msgstr "位在通道 %d id %d\n" -#: diskdrake/interactive.pm:1509 +#: diskdrake/interactive.pm:1539 #, c-format msgid "Choose your filesystem encryption key" msgstr "選擇您檔案系統所使用的加密金鑰" -#: diskdrake/interactive.pm:1512 +#: diskdrake/interactive.pm:1542 #, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "這個加密金鑰太簡單了 (至少要有 %d 個字元才行)" -#: diskdrake/interactive.pm:1519 +#: diskdrake/interactive.pm:1549 #, c-format msgid "Encryption algorithm" msgstr "加密演算法" @@ -2295,7 +2295,7 @@ msgstr "需要安裝下列軟體套件：\n" msgid "Installing packages..." msgstr "正在安裝軟體套件..." -#: do_pkgs.pm:388 pkgs.pm:293 +#: do_pkgs.pm:388 pkgs.pm:294 #, c-format msgid "Removing packages..." msgstr "正在移除軟體套件..." @@ -2309,12 +2309,12 @@ msgstr "" "發生了一個錯誤 - 找不到任何有效的裝置可以用來建立新的檔案系統，請檢查您的硬體" "以找出問題的原因所在" -#: fs/any.pm:77 fs/partitioning_wizard.pm:77 +#: fs/any.pm:77 fs/partitioning_wizard.pm:91 #, c-format msgid "You must have a ESP FAT32 partition mounted in /boot/EFI" msgstr "您必須有一個掛載於 /boot/EFI 的 ESP FAT32 分割區" -#: fs/any.pm:83 fs/partitioning_wizard.pm:82 +#: fs/any.pm:83 fs/partitioning_wizard.pm:96 #, c-format msgid "" "You must have a BIOS boot partition for non-UEFI GPT-partitioned disks. " @@ -2323,27 +2323,27 @@ msgstr "" "您必須有一個 BIOS 開機分割區給非 UEFI 的 GPT 磁碟分割區。請先建立一個後再繼" "續。" -#: fs/format.pm:110 +#: fs/format.pm:176 #, c-format msgid "Creating and formatting file %s" msgstr "建立並格式化檔案 %s" -#: fs/format.pm:130 +#: fs/format.pm:202 #, c-format msgid "I do not know how to set label on %s with type %s" msgstr "我不知道如何在 %s 上設定型態 %s 的標籤" -#: fs/format.pm:142 +#: fs/format.pm:214 #, c-format msgid "setting label on %s failed, is it formatted?" msgstr "在 %s 上設定標籤失敗了，它格式化了嗎?" -#: fs/format.pm:190 +#: fs/format.pm:280 #, c-format msgid "I do not know how to format %s in type %s" msgstr "不知道要如何將 %s 格式化為 %s 格式" -#: fs/format.pm:195 fs/format.pm:197 +#: fs/format.pm:285 fs/format.pm:287 #, c-format msgid "%s formatting of %s failed" msgstr "以 %s 格式化 %s 失敗" @@ -2368,7 +2368,7 @@ msgstr "正在將 %s 分割區掛載於 %s 目錄時失敗" msgid "Checking %s" msgstr "檢查 %s" -#: fs/mount.pm:126 partition_table.pm:488 +#: fs/mount.pm:126 partition_table.pm:500 #, c-format msgid "error unmounting %s: %s" msgstr "卸下 %s 的掛載時發生錯誤：%s" @@ -2503,24 +2503,24 @@ msgstr "正在掃描分割區以尋找掛載點" msgid "Choose the mount points" msgstr "選取掛載點" -#: fs/partitioning.pm:46 +#: fs/partitioning.pm:48 #, c-format msgid "Choose the partitions you want to format" msgstr "選擇要格式化的分割區" -#: fs/partitioning.pm:75 +#: fs/partitioning.pm:77 #, c-format msgid "" "Failed to check filesystem %s. Do you want to repair the errors? (beware, " "you can lose data)" msgstr "無法檢查檔案系統 %s。您要修復該錯誤嗎？ (請注意，您可能會遺失資料)" -#: fs/partitioning.pm:78 +#: fs/partitioning.pm:80 #, c-format msgid "Not enough swap space to fulfill installation, please add some" msgstr "沒有足夠的置換空間 (swap) 可以用來完成安裝，請增加一些" -#: fs/partitioning_wizard.pm:66 +#: fs/partitioning_wizard.pm:80 #, c-format msgid "" "You must have a root partition.\n" @@ -2531,7 +2531,7 @@ msgstr "" "您可以建立一個分割區（或是點擊選取現有的分割區），然後將它的掛載點設定為 " "”/”。" -#: fs/partitioning_wizard.pm:72 +#: fs/partitioning_wizard.pm:86 #, c-format msgid "" "You do not have a swap partition.\n" @@ -2542,42 +2542,42 @@ msgstr "" "\n" "不管如何都要繼續？" -#: fs/partitioning_wizard.pm:115 +#: fs/partitioning_wizard.pm:129 #, c-format msgid "Use free space" msgstr "使用未用到的空間" -#: fs/partitioning_wizard.pm:117 +#: fs/partitioning_wizard.pm:131 #, c-format msgid "Not enough free space to allocate new partitions" msgstr "沒有足夠的空間可以建立新的分割區了" -#: fs/partitioning_wizard.pm:125 +#: fs/partitioning_wizard.pm:139 #, c-format msgid "Use existing partitions" msgstr "使用已經存在的分割區" -#: fs/partitioning_wizard.pm:127 +#: fs/partitioning_wizard.pm:141 #, c-format msgid "There is no existing partition to use" msgstr "沒有已經存在的分割區可供使用" -#: fs/partitioning_wizard.pm:151 +#: fs/partitioning_wizard.pm:165 #, c-format msgid "Computing the size of the Microsoft Windows® partition" msgstr "正在計算 Microsoft Windows® 分割區大小" -#: fs/partitioning_wizard.pm:187 +#: fs/partitioning_wizard.pm:201 #, c-format msgid "Use the free space on a Microsoft Windows® partition" msgstr "使用 Microsoft Windows® 分割區中所剩餘的可用空間" -#: fs/partitioning_wizard.pm:191 +#: fs/partitioning_wizard.pm:205 #, c-format msgid "Which partition do you want to resize?" msgstr "您要重新調整那個分割區的大小？" -#: fs/partitioning_wizard.pm:194 +#: fs/partitioning_wizard.pm:208 #, c-format msgid "" "Your Microsoft Windows® partition is too fragmented. Please reboot your " @@ -2587,12 +2587,12 @@ msgstr "" "您的 Microsoft Windows® 分割區太過零散，需要重整。請先將您的系統開到 " "Microsoft Windows® 下執行 ``defrag''，執行完畢後再重新啟動 %s 安裝。" -#: fs/partitioning_wizard.pm:201 +#: fs/partitioning_wizard.pm:215 #, c-format msgid "Failed to find the partition to resize (%d choices)" msgstr "無法找到要調整大小的分割區 (%d 個選擇)" -#: fs/partitioning_wizard.pm:208 +#: fs/partitioning_wizard.pm:222 #, c-format msgid "" "WARNING!\n" @@ -2626,75 +2626,75 @@ msgstr "" "當您確定之後，請按下%s。" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX -#: fs/partitioning_wizard.pm:217 fs/partitioning_wizard.pm:594 +#: fs/partitioning_wizard.pm:231 fs/partitioning_wizard.pm:608 #: interactive.pm:674 interactive/curses.pm:270 ugtk2.pm:519 ugtk3.pm:593 #, c-format msgid "Next" msgstr "下一步" -#: fs/partitioning_wizard.pm:223 +#: fs/partitioning_wizard.pm:237 #, c-format msgid "Partitionning" msgstr "分割磁區" -#: fs/partitioning_wizard.pm:223 +#: fs/partitioning_wizard.pm:237 #, c-format msgid "Which size do you want to keep for Microsoft Windows® on partition %s?" msgstr "您要保留多少空間給 Microsoft Windows® 使用 分割區 %s?" -#: fs/partitioning_wizard.pm:224 +#: fs/partitioning_wizard.pm:238 #, c-format msgid "Size" msgstr "大小" -#: fs/partitioning_wizard.pm:233 +#: fs/partitioning_wizard.pm:247 #, c-format msgid "Resizing Microsoft Windows® partition" msgstr "正在重新調整 Microsoft Windows® 分割區大小" -#: fs/partitioning_wizard.pm:238 +#: fs/partitioning_wizard.pm:252 #, c-format msgid "FAT resizing failed: %s" msgstr "FAT 重新調整大小失敗： %s" -#: fs/partitioning_wizard.pm:254 +#: fs/partitioning_wizard.pm:268 #, c-format msgid "There is no FAT partition to resize (or not enough space left)" msgstr "沒有 FAT 分割區能夠調整大小 (或者是沒足夠空間剩下)" -#: fs/partitioning_wizard.pm:259 +#: fs/partitioning_wizard.pm:273 #, c-format msgid "Remove Microsoft Windows®" msgstr "移除 Microsoft Windows®" -#: fs/partitioning_wizard.pm:259 +#: fs/partitioning_wizard.pm:273 #, c-format msgid "Erase and use entire disk" msgstr "清除並使用整個磁碟" -#: fs/partitioning_wizard.pm:263 +#: fs/partitioning_wizard.pm:277 #, c-format msgid "" "You have more than one hard disk drive, which one do you want the installer " "to use?" msgstr "您有一個以上的硬碟機。您要使用哪一個？" -#: fs/partitioning_wizard.pm:271 fsedit.pm:641 +#: fs/partitioning_wizard.pm:285 fsedit.pm:655 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "所有在 %s 磁碟上的已經存在的分割區跟他們的資料都將會遺失" -#: fs/partitioning_wizard.pm:284 +#: fs/partitioning_wizard.pm:298 #, c-format msgid "Custom disk partitioning" msgstr "自訂磁碟分割" -#: fs/partitioning_wizard.pm:290 +#: fs/partitioning_wizard.pm:304 #, c-format msgid "Use fdisk" msgstr "使用 fdisk" -#: fs/partitioning_wizard.pm:293 +#: fs/partitioning_wizard.pm:307 #, c-format msgid "" "You can now partition %s.\n" @@ -2703,42 +2703,42 @@ msgstr "" "您現在可以對 %s 分割區進行劃分動作.\n" "當您完成時, 別忘了使用 'w' 儲存" -#: fs/partitioning_wizard.pm:436 +#: fs/partitioning_wizard.pm:450 #, c-format msgid "Ext2/3/4" msgstr "Ext2/3/4" -#: fs/partitioning_wizard.pm:466 fs/partitioning_wizard.pm:614 +#: fs/partitioning_wizard.pm:480 fs/partitioning_wizard.pm:628 #, c-format msgid "I cannot find any room for installing" msgstr "找不到任何空間來做安裝" -#: fs/partitioning_wizard.pm:475 fs/partitioning_wizard.pm:621 +#: fs/partitioning_wizard.pm:489 fs/partitioning_wizard.pm:635 #, c-format msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "DrakX 分割精靈找到了下列方案：" -#: fs/partitioning_wizard.pm:545 +#: fs/partitioning_wizard.pm:559 #, c-format msgid "Here is the content of your disk drive " msgstr "這是您的磁碟內容 " -#: fs/partitioning_wizard.pm:632 +#: fs/partitioning_wizard.pm:646 #, c-format msgid "Partitioning failed: %s" msgstr "硬碟分割失敗：%s" -#: fs/type.pm:383 +#: fs/type.pm:430 #, c-format msgid "You cannot use JFS for partitions smaller than 16MB" msgstr "使用 JFS 分割區，大小不能小於 16MB" -#: fs/type.pm:384 +#: fs/type.pm:431 #, c-format msgid "You cannot use ReiserFS for partitions smaller than 32MB" msgstr "使用 ReiserFS 分割區，大小不能小於 32MB" -#: fs/type.pm:385 +#: fs/type.pm:432 #, c-format msgid "You cannot use btrfs for partitions smaller than 256MB" msgstr "您不能在小於 256MB 的分割區使用 btrfs" @@ -2758,12 +2758,12 @@ msgstr "將 /usr 分別掛載" msgid "server" msgstr "伺服器" -#: fsedit.pm:155 +#: fsedit.pm:159 #, c-format msgid "BIOS software RAID detected on disks %s. Activate it?" msgstr "在磁碟機 %s 偵測到 BIOS 軟體 RAID。要啟用嗎？" -#: fsedit.pm:265 +#: fsedit.pm:269 #, c-format msgid "" "I cannot read the partition table of device %s, it's too corrupted for me :" @@ -2781,22 +2781,22 @@ msgstr "" "\n" "您同意清除所有的分割區嗎？\n" -#: fsedit.pm:448 +#: fsedit.pm:453 #, c-format msgid "Mount points must begin with a leading /" msgstr "掛載點必需以 / 開頭" -#: fsedit.pm:449 +#: fsedit.pm:454 #, c-format msgid "Mount points should contain only alphanumerical characters" msgstr "掛載點應該只有包含英文字母與數字與底線這類字元" -#: fsedit.pm:450 +#: fsedit.pm:455 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "已經有分割區分配到掛載點 %s 了\n" -#: fsedit.pm:453 +#: fsedit.pm:458 #, c-format msgid "" "You've selected an encrypted partition as root (/).\n" @@ -2806,17 +2806,17 @@ msgstr "" "您將根分割區（/）做加密。開機載入器無法在沒有單獨的 /boot 分割區的狀況下這麼" "做。請新增一個 /boot 分割區" -#: fsedit.pm:459 fsedit.pm:470 +#: fsedit.pm:464 fsedit.pm:475 #, c-format msgid "You cannot use an encrypted filesystem for mount point %s" msgstr "您不能在掛載點 %s 使用加密的檔案系統" -#: fsedit.pm:462 fsedit.pm:464 +#: fsedit.pm:467 fsedit.pm:469 #, c-format msgid "This directory should remain within the root filesystem" msgstr "這個目錄應該放在根檔案系統 (/) 才對" -#: fsedit.pm:466 fsedit.pm:468 +#: fsedit.pm:471 fsedit.pm:473 #, c-format msgid "" "You need a true filesystem (ext2/3/4, reiserfs, xfs, or jfs) for this mount " @@ -2824,12 +2824,12 @@ msgid "" msgstr "" "您需要一個真正的檔案系統 (ext2/ext3、reiserfs、xfs 或是 jfs) 來放這個掛載點\n" -#: fsedit.pm:538 +#: fsedit.pm:548 #, c-format msgid "Not enough free space for auto-allocating" msgstr "沒有足夠的空間來進行自動配置" -#: fsedit.pm:540 +#: fsedit.pm:550 #, c-format msgid "Nothing to do" msgstr "沒有做任何動作" @@ -4624,7 +4624,7 @@ msgstr "尚比亞" msgid "Zimbabwe" msgstr "辛巴威" -#: lang.pm:1537 +#: lang.pm:1539 #, c-format msgid "Welcome to %s" msgstr "歡迎使用 %s" @@ -5051,12 +5051,12 @@ msgstr "密碼應該要能抵擋最基本的攻擊" msgid "Password seems secure" msgstr "密碼似乎是安全的" -#: partition_table.pm:494 +#: partition_table.pm:506 #, c-format msgid "mount failed: " msgstr "掛載失敗：" -#: partition_table.pm:664 +#: partition_table.pm:677 #, c-format msgid "" "You have a hole in your partition table but I cannot use it.\n" @@ -5066,7 +5066,7 @@ msgstr "" "您的磁碟分割表中有一塊空間沒用到，但我無法使用它。\n" "唯一的解決方式是將您的主要分割區移動，將這塊空間與延伸分割區相鄰。" -#: partition_table/raw.pm:293 +#: partition_table/raw.pm:294 #, c-format msgid "" "Something bad is happening on your hard disk drive. \n" @@ -5078,39 +5078,39 @@ msgstr "" "資料完整性的檢查失敗。\n" "這表示寫入此硬碟的資料可能都會損毀。" -#: pkgs.pm:260 pkgs.pm:263 pkgs.pm:276 +#: pkgs.pm:261 pkgs.pm:264 pkgs.pm:277 #, c-format msgid "Unused packages removal" msgstr "移除未使用的套件" -#: pkgs.pm:260 +#: pkgs.pm:261 #, c-format msgid "Finding unused hardware packages..." msgstr "尋找未使用的硬體套件..." -#: pkgs.pm:263 +#: pkgs.pm:264 #, c-format msgid "Finding unused localization packages..." msgstr "尋找未使用的語言套件..." -#: pkgs.pm:277 +#: pkgs.pm:278 #, c-format msgid "" "We have detected that some packages are not needed for your system " "configuration." msgstr "我們偵測到您的系統設定並不需要某些套件。" -#: pkgs.pm:278 +#: pkgs.pm:279 #, c-format msgid "We will remove the following packages, unless you choose otherwise:" msgstr "除非您選擇保留，否則我們將會移除以下套件：" -#: pkgs.pm:281 pkgs.pm:282 +#: pkgs.pm:282 pkgs.pm:283 #, c-format msgid "Unused hardware support" msgstr "未使用的硬體支援" -#: pkgs.pm:285 pkgs.pm:286 +#: pkgs.pm:286 pkgs.pm:287 #, c-format msgid "Unused localization" msgstr "未使用的區域設定" -- cgit v1.2.1