From 852bf2f9de8bd89ba988e78f9db0d43883571f60 Mon Sep 17 00:00:00 2001
From: Funda Wang <fwang@mandriva.org>
Date: Sun, 28 Aug 2005 10:30:49 +0000
Subject: Updated POT file. Sorry about that :(

---
 perl-install/share/po/zh_CN.po | 2204 ++++++++++++++++++++++------------------
 1 file changed, 1210 insertions(+), 994 deletions(-)

(limited to 'perl-install/share/po/zh_CN.po')

diff --git a/perl-install/share/po/zh_CN.po b/perl-install/share/po/zh_CN.po
index df9d3d82e..4d07eb0c6 100644
--- a/perl-install/share/po/zh_CN.po
+++ b/perl-install/share/po/zh_CN.po
@@ -7,9 +7,9 @@
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: DrakX 10.3\n"
-"POT-Creation-Date: 2005-08-25 15:00+0200\n"
-"PO-Revision-Date: 2005-08-01 05:03+0800\n"
+"Project-Id-Version: DrakX 2006\n"
+"POT-Creation-Date: 2005-08-28 17:40+0800\n"
+"PO-Revision-Date: 2005-08-28 17:56+0800\n"
 "Last-Translator: Funda Wang <fundawang@linux.net.cn>\n"
 "Language-Team: Mandriva Linux i18n Team <cooker-i18n@mandrivalinux.org>\n"
 "MIME-Version: 1.0\n"
@@ -72,7 +72,7 @@ msgstr ""
 "请单击按钮重新启动计算机, 拔出该密钥盘之后, 去掉写保护后再插入, \n"
 "然后再次调用 Mandriva Move。"
 
-#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1320
+#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1324
 #, c-format
 msgid "Reboot"
 msgstr "重新启动"
@@ -182,24 +182,24 @@ msgstr "请稍候, 正在检测并配置设备..."
 #: printer/printerdrake.pm:450 printer/printerdrake.pm:514
 #: printer/printerdrake.pm:686 printer/printerdrake.pm:690
 #: printer/printerdrake.pm:772 printer/printerdrake.pm:1575
-#: printer/printerdrake.pm:1622 printer/printerdrake.pm:1659
-#: printer/printerdrake.pm:1704 printer/printerdrake.pm:1708
-#: printer/printerdrake.pm:1722 printer/printerdrake.pm:1814
-#: printer/printerdrake.pm:1895 printer/printerdrake.pm:1899
-#: printer/printerdrake.pm:1903 printer/printerdrake.pm:1952
-#: printer/printerdrake.pm:2010 printer/printerdrake.pm:2014
-#: printer/printerdrake.pm:2028 printer/printerdrake.pm:2148
-#: printer/printerdrake.pm:2152 printer/printerdrake.pm:2195
-#: printer/printerdrake.pm:2270 printer/printerdrake.pm:2288
-#: printer/printerdrake.pm:2297 printer/printerdrake.pm:2306
-#: printer/printerdrake.pm:2317 printer/printerdrake.pm:2381
-#: printer/printerdrake.pm:2476 printer/printerdrake.pm:3025
-#: printer/printerdrake.pm:3309 printer/printerdrake.pm:3315
-#: printer/printerdrake.pm:3879 printer/printerdrake.pm:3883
-#: printer/printerdrake.pm:3887 printer/printerdrake.pm:4348
-#: printer/printerdrake.pm:4589 printer/printerdrake.pm:4613
-#: printer/printerdrake.pm:4690 printer/printerdrake.pm:4756
-#: printer/printerdrake.pm:4876 standalone/drakTermServ:394
+#: printer/printerdrake.pm:1623 printer/printerdrake.pm:1660
+#: printer/printerdrake.pm:1705 printer/printerdrake.pm:1709
+#: printer/printerdrake.pm:1723 printer/printerdrake.pm:1815
+#: printer/printerdrake.pm:1896 printer/printerdrake.pm:1900
+#: printer/printerdrake.pm:1904 printer/printerdrake.pm:1953
+#: printer/printerdrake.pm:2011 printer/printerdrake.pm:2015
+#: printer/printerdrake.pm:2029 printer/printerdrake.pm:2149
+#: printer/printerdrake.pm:2153 printer/printerdrake.pm:2196
+#: printer/printerdrake.pm:2271 printer/printerdrake.pm:2289
+#: printer/printerdrake.pm:2298 printer/printerdrake.pm:2307
+#: printer/printerdrake.pm:2318 printer/printerdrake.pm:2382
+#: printer/printerdrake.pm:2477 printer/printerdrake.pm:3026
+#: printer/printerdrake.pm:3310 printer/printerdrake.pm:3316
+#: printer/printerdrake.pm:3880 printer/printerdrake.pm:3884
+#: printer/printerdrake.pm:3888 printer/printerdrake.pm:4349
+#: printer/printerdrake.pm:4590 printer/printerdrake.pm:4614
+#: printer/printerdrake.pm:4691 printer/printerdrake.pm:4757
+#: printer/printerdrake.pm:4877 standalone/drakTermServ:394
 #: standalone/drakTermServ:464 standalone/drakTermServ:473
 #: standalone/drakTermServ:774 standalone/drakTermServ:781
 #: standalone/drakTermServ:802 standalone/drakTermServ:849
@@ -216,13 +216,19 @@ msgstr "请稍候, 正在检测并配置设备..."
 #: standalone/drakconnect:685 standalone/drakconnect:700
 #: standalone/drakfont:210 standalone/drakfont:223 standalone/drakfont:261
 #: standalone/drakgw:50 standalone/drakgw:188 standalone/drakhosts:98
-#: standalone/drakhosts:248 standalone/drakhosts:255 standalone/drakhosts:262
-#: standalone/draknfs:306 standalone/draknfs:598 standalone/draknfs:605
-#: standalone/draknfs:612 standalone/drakroam:41 standalone/draksambashare:251
-#: standalone/draksambashare:255 standalone/draksambashare:258
-#: standalone/draksambashare:261 standalone/draksambashare:325
-#: standalone/draksambashare:430 standalone/draksambashare:601
-#: standalone/draksambashare:609 standalone/draksambashare:616
+#: standalone/drakhosts:246 standalone/drakhosts:253 standalone/drakhosts:260
+#: standalone/draknfs:304 standalone/draknfs:593 standalone/draknfs:600
+#: standalone/draknfs:607 standalone/drakroam:41 standalone/draksambashare:379
+#: standalone/draksambashare:383 standalone/draksambashare:386
+#: standalone/draksambashare:389 standalone/draksambashare:449
+#: standalone/draksambashare:473 standalone/draksambashare:547
+#: standalone/draksambashare:629 standalone/draksambashare:696
+#: standalone/draksambashare:796 standalone/draksambashare:803
+#: standalone/draksambashare:938 standalone/draksambashare:1129
+#: standalone/draksambashare:1138 standalone/draksambashare:1147
+#: standalone/draksambashare:1168 standalone/draksambashare:1177
+#: standalone/draksambashare:1186 standalone/draksambashare:1206
+#: standalone/draksambashare:1214 standalone/draksambashare:1226
 #: standalone/draksplash:150 standalone/drakxtv:107
 #: standalone/finish-install:49 standalone/logdrake:168
 #: standalone/logdrake:437 standalone/logdrake:442 standalone/scannerdrake:59
@@ -406,52 +412,52 @@ msgstr "无法安装 Xorg 软件包: %s"
 msgid "Select the memory size of your graphics card"
 msgstr "请选择您显示卡上内存的大小"
 
-#: Xconfig/card.pm:345
+#: Xconfig/card.pm:351
 #, c-format
 msgid "Xorg configuration"
 msgstr "Xorg 配置"
 
-#: Xconfig/card.pm:347
+#: Xconfig/card.pm:353
 #, c-format
 msgid "Which configuration of Xorg do you want to have?"
 msgstr "您希望拥有哪个 Xorg 配置?"
 
-#: Xconfig/card.pm:380
+#: Xconfig/card.pm:386
 #, c-format
 msgid "Configure all heads independently"
 msgstr "独立配置所有头"
 
-#: Xconfig/card.pm:381
+#: Xconfig/card.pm:387
 #, c-format
 msgid "Use Xinerama extension"
 msgstr "使用 Xinerama 扩展"
 
-#: Xconfig/card.pm:386
+#: Xconfig/card.pm:392
 #, c-format
 msgid "Configure only card \"%s\"%s"
 msgstr "只配置“%s”%s 卡"
 
-#: Xconfig/card.pm:398 Xconfig/various.pm:23
+#: Xconfig/card.pm:404 Xconfig/various.pm:23
 #, c-format
 msgid "Xorg %s"
 msgstr "Xorg %s"
 
-#: Xconfig/card.pm:405 Xconfig/various.pm:22
+#: Xconfig/card.pm:411 Xconfig/various.pm:22
 #, c-format
 msgid "Xorg %s with 3D hardware acceleration"
 msgstr "Xorg %s 带有硬件 3D 加速的支持"
 
-#: Xconfig/card.pm:407
+#: Xconfig/card.pm:413
 #, c-format
 msgid "Your card can have 3D hardware acceleration support with Xorg %s."
 msgstr "使用 Xorg %s, 您的显示卡可以得到 3D 硬件加速支持。"
 
-#: Xconfig/card.pm:413
+#: Xconfig/card.pm:419
 #, c-format
 msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
 msgstr "Xorg %s 带有试验阶段的 3D 硬件加速支持"
 
-#: Xconfig/card.pm:415
+#: Xconfig/card.pm:421
 #, c-format
 msgid ""
 "Your card can have 3D hardware acceleration support with Xorg %s,\n"
@@ -460,16 +466,16 @@ msgstr ""
 "使用 Xorg %s, 您的显示卡可以得到 3D 硬件加速支持。\n"
 "注意这是试验阶段的支持, 它可能会使您的电脑失去反应。"
 
-#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:964
+#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:971
 #, c-format
 msgid "Custom"
 msgstr "自定义"
 
 #: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14
-#: install_steps_interactive.pm:85 install_steps_interactive.pm:1320
+#: install_steps_interactive.pm:86 install_steps_interactive.pm:1324
 #: printer/printerdrake.pm:882 printer/printerdrake.pm:899
-#: printer/printerdrake.pm:4685 printer/printerdrake.pm:5140
-#: standalone/drakhosts:265 standalone/drakids:62 standalone/drakids:71
+#: printer/printerdrake.pm:4686 printer/printerdrake.pm:5141
+#: standalone/drakhosts:263 standalone/drakids:62 standalone/drakids:71
 #: standalone/drakids:79 standalone/draksplash:81 standalone/logdrake:173
 #: standalone/net_applet:84 standalone/scannerdrake:477
 #, c-format
@@ -499,7 +505,7 @@ msgstr "测试"
 #: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:448
 #: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:79
 #: printer/printerdrake.pm:1125 standalone/drakfont:491
-#: standalone/drakfont:553
+#: standalone/drakfont:554
 #, c-format
 msgid "Options"
 msgstr "选项"
@@ -636,27 +642,27 @@ msgstr "显示卡: %s"
 #: standalone/drakbackup:4035 standalone/drakbackup:4079
 #: standalone/drakconnect:158 standalone/drakconnect:852
 #: standalone/drakconnect:939 standalone/drakconnect:1030
-#: standalone/drakfont:574 standalone/drakfont:584 standalone/drakroam:392
+#: standalone/drakfont:575 standalone/drakfont:585 standalone/drakroam:392
 #: standalone/draksplash:161 standalone/drakups:212 standalone/net_monitor:340
-#: ugtk2.pm:412 ugtk2.pm:510 ugtk2.pm:916 ugtk2.pm:939
+#: ugtk2.pm:412 ugtk2.pm:510 ugtk2.pm:918 ugtk2.pm:941
 #, c-format
 msgid "Ok"
 msgstr "确定"
 
 #: Xconfig/resolution_and_depth.pm:373 diskdrake/smbnfs_gtk.pm:80 help.pm:89
-#: help.pm:444 install_steps_gtk.pm:485 install_steps_interactive.pm:423
-#: install_steps_interactive.pm:832 interactive.pm:433 interactive/gtk.pm:815
+#: help.pm:444 install_steps_gtk.pm:485 install_steps_interactive.pm:425
+#: install_steps_interactive.pm:834 interactive.pm:433 interactive/gtk.pm:815
 #: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
 #: interactive/newt.pm:428 interactive/stdio.pm:39 interactive/stdio.pm:142
-#: interactive/stdio.pm:176 printer/printerdrake.pm:3959
+#: interactive/stdio.pm:176 printer/printerdrake.pm:3960
 #: standalone/drakautoinst:215 standalone/drakbackup:1350
 #: standalone/drakbackup:3901 standalone/drakbackup:3905
 #: standalone/drakbackup:3963 standalone/drakconnect:157
 #: standalone/drakconnect:937 standalone/drakconnect:1029
-#: standalone/drakfont:584 standalone/drakfont:662 standalone/drakfont:739
+#: standalone/drakfont:585 standalone/drakfont:663 standalone/drakfont:740
 #: standalone/draksplash:161 standalone/drakups:219 standalone/logdrake:173
 #: standalone/net_monitor:339 ugtk2.pm:406 ugtk2.pm:508 ugtk2.pm:517
-#: ugtk2.pm:916
+#: ugtk2.pm:918
 #, c-format
 msgid "Cancel"
 msgstr "取消"
@@ -666,9 +672,9 @@ msgstr "取消"
 #: interactive/gtk.pm:681 interactive/gtk.pm:683 standalone/drakTermServ:284
 #: standalone/drakbackup:3897 standalone/drakbug:105
 #: standalone/drakconnect:153 standalone/drakconnect:236
-#: standalone/drakfont:509 standalone/draknfs:208 standalone/drakperm:133
-#: standalone/draksambashare:213 standalone/draksec:336 standalone/draksec:338
-#: standalone/draksec:356 standalone/draksec:358 ugtk2.pm:1048 ugtk2.pm:1049
+#: standalone/drakfont:510 standalone/draknfs:206 standalone/drakperm:133
+#: standalone/draksambashare:314 standalone/draksec:336 standalone/draksec:338
+#: standalone/draksec:356 standalone/draksec:358 ugtk2.pm:1050 ugtk2.pm:1051
 #, c-format
 msgid "Help"
 msgstr "帮助"
@@ -811,7 +817,7 @@ msgid ""
 "other"
 msgstr "其它"
 
-#: any.pm:142 harddrake/sound.pm:192 interactive.pm:470 pkgs.pm:460
+#: any.pm:142 harddrake/sound.pm:192 interactive.pm:470 pkgs.pm:461
 #: standalone/drakconnect:160 standalone/drakconnect:635 standalone/draksec:68
 #: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:246
 #: standalone/service_harddrake:207
@@ -891,7 +897,7 @@ msgstr "根分区的第一扇区"
 msgid "On Floppy"
 msgstr "在软盘上"
 
-#: any.pm:236 help.pm:739 printer/printerdrake.pm:4345
+#: any.pm:236 help.pm:739 printer/printerdrake.pm:4346
 #, c-format
 msgid "Skip"
 msgstr "跳过"
@@ -911,221 +917,221 @@ msgstr "您希望启动引导程序安装到哪里?"
 msgid "Boot Style Configuration"
 msgstr "启动风格配置"
 
-#: any.pm:269 any.pm:301
+#: any.pm:269 any.pm:270 any.pm:303 any.pm:304
 #, c-format
 msgid "Bootloader main options"
 msgstr "引导程序的主要选项"
 
-#: any.pm:273
+#: any.pm:275
 #, c-format
 msgid "Give the ram size in MB"
 msgstr "以兆为单位给出内存大小"
 
-#: any.pm:275
+#: any.pm:277
 #, c-format
 msgid ""
 "Option ``Restrict command line options'' is of no use without a password"
 msgstr "没有密码不能使用“限定命令行选项”"
 
-#: any.pm:276 any.pm:609 authentication.pm:181
+#: any.pm:278 any.pm:613 authentication.pm:181
 #, c-format
 msgid "The passwords do not match"
 msgstr "两次密码不符"
 
-#: any.pm:276 any.pm:609 authentication.pm:181 diskdrake/interactive.pm:1326
+#: any.pm:278 any.pm:613 authentication.pm:181 diskdrake/interactive.pm:1326
 #, c-format
 msgid "Please try again"
 msgstr "请再试一次"
 
-#: any.pm:281 any.pm:304
+#: any.pm:283 any.pm:308
 #, c-format
 msgid "Bootloader to use"
 msgstr "要使用的引导程序"
 
-#: any.pm:283 any.pm:306
+#: any.pm:285 any.pm:310
 #, c-format
 msgid "Boot device"
 msgstr "启动设备"
 
-#: any.pm:285
+#: any.pm:287
 #, c-format
 msgid "Delay before booting default image"
 msgstr "启动默认映像前的延迟"
 
-#: any.pm:286
+#: any.pm:288
 #, c-format
 msgid "Enable ACPI"
 msgstr "启用 ACPI"
 
-#: any.pm:288
+#: any.pm:290
 #, c-format
 msgid "Force no APIC"
 msgstr "强制无 APIC"
 
-#: any.pm:290
+#: any.pm:292
 #, c-format
 msgid "Force No Local APIC"
 msgstr "强制无本地 APIC"
 
-#: any.pm:292 any.pm:643 authentication.pm:186 diskdrake/smbnfs_gtk.pm:180
-#: network/netconnect.pm:571 printer/printerdrake.pm:1886
-#: printer/printerdrake.pm:2007 standalone/drakbackup:1630
+#: any.pm:294 any.pm:648 authentication.pm:186 diskdrake/smbnfs_gtk.pm:180
+#: network/netconnect.pm:571 printer/printerdrake.pm:1887
+#: printer/printerdrake.pm:2008 standalone/drakbackup:1630
 #: standalone/drakbackup:3504 standalone/drakups:299
 #, c-format
 msgid "Password"
 msgstr "密码"
 
-#: any.pm:293 any.pm:644 authentication.pm:187
+#: any.pm:295 any.pm:649 authentication.pm:187
 #, c-format
 msgid "Password (again)"
 msgstr "密码(请再输一次)"
 
-#: any.pm:294
+#: any.pm:296
 #, c-format
 msgid "Restrict command line options"
 msgstr "限制命令行选项"
 
-#: any.pm:294
+#: any.pm:296
 #, c-format
 msgid "restrict"
 msgstr "限制"
 
-#: any.pm:296
+#: any.pm:298
 #, c-format
 msgid "Clean /tmp at each boot"
 msgstr "每次启动时清除 /tmp"
 
-#: any.pm:297
+#: any.pm:299
 #, c-format
 msgid "Precise RAM size if needed (found %d MB)"
 msgstr "精确的内存大小(找到 %d MB)"
 
-#: any.pm:305
+#: any.pm:309
 #, c-format
 msgid "Init Message"
 msgstr "初始信息"
 
-#: any.pm:307
+#: any.pm:311
 #, c-format
 msgid "Open Firmware Delay"
 msgstr "开放固件延迟"
 
-#: any.pm:308
+#: any.pm:312
 #, c-format
 msgid "Kernel Boot Timeout"
 msgstr "核心启动超时"
 
-#: any.pm:309
+#: any.pm:313
 #, c-format
 msgid "Enable CD Boot?"
 msgstr "允许 CD 启动?"
 
-#: any.pm:310
+#: any.pm:314
 #, c-format
 msgid "Enable OF Boot?"
 msgstr "启用 OF 启动?"
 
-#: any.pm:311
+#: any.pm:315
 #, c-format
 msgid "Default OS?"
 msgstr "默认操作系统?"
 
-#: any.pm:364
+#: any.pm:368
 #, c-format
 msgid "Image"
 msgstr "映像"
 
-#: any.pm:365 any.pm:375
+#: any.pm:369 any.pm:379
 #, c-format
 msgid "Root"
 msgstr "根目录"
 
-#: any.pm:366 any.pm:388
+#: any.pm:370 any.pm:392
 #, c-format
 msgid "Append"
 msgstr "追加"
 
-#: any.pm:368 standalone/drakboot:263 standalone/drakboot:267
+#: any.pm:372 standalone/drakboot:263 standalone/drakboot:267
 #, c-format
 msgid "Video mode"
 msgstr "显示模式"
 
-#: any.pm:370
+#: any.pm:374
 #, c-format
 msgid "Initrd"
 msgstr "Initrd"
 
-#: any.pm:371
+#: any.pm:375
 #, c-format
 msgid "Network profile"
 msgstr "网络配置文件"
 
-#: any.pm:380 any.pm:385 any.pm:387
+#: any.pm:384 any.pm:389 any.pm:391
 #, c-format
 msgid "Label"
 msgstr "标签"
 
-#: any.pm:382 any.pm:392 harddrake/v4l.pm:358 standalone/draksec:52
+#: any.pm:386 any.pm:396 harddrake/v4l.pm:368 standalone/draksec:52
 #, c-format
 msgid "Default"
 msgstr "默认"
 
-#: any.pm:389
+#: any.pm:393
 #, c-format
 msgid "Initrd-size"
 msgstr "Initrd 大小"
 
-#: any.pm:391
+#: any.pm:395
 #, c-format
 msgid "NoVideo"
 msgstr "无视频"
 
-#: any.pm:402
+#: any.pm:406
 #, c-format
 msgid "Empty label not allowed"
 msgstr "标签不能为空"
 
-#: any.pm:403
+#: any.pm:407
 #, c-format
 msgid "You must specify a kernel image"
 msgstr "您必须指定一个内核映像"
 
-#: any.pm:403
+#: any.pm:407
 #, c-format
 msgid "You must specify a root partition"
 msgstr "您必须指定根目录所在分区"
 
-#: any.pm:404
+#: any.pm:408
 #, c-format
 msgid "This label is already used"
 msgstr "这个名字已经被使用"
 
-#: any.pm:418
+#: any.pm:422
 #, c-format
 msgid "Which type of entry do you want to add?"
 msgstr "要添加的条目是什么类型?"
 
-#: any.pm:419
+#: any.pm:423
 #, c-format
 msgid "Linux"
 msgstr "Linux"
 
-#: any.pm:419
+#: any.pm:423
 #, c-format
 msgid "Other OS (SunOS...)"
 msgstr "其它操作系统(SunOS...)"
 
-#: any.pm:420
+#: any.pm:424
 #, c-format
 msgid "Other OS (MacOS...)"
 msgstr "其它操作系统(MacOS...)"
 
-#: any.pm:420
+#: any.pm:424
 #, c-format
 msgid "Other OS (Windows...)"
 msgstr "其它操作系统(Windows...)"
 
-#: any.pm:448
+#: any.pm:452
 #, c-format
 msgid ""
 "Here are the entries on your boot menu so far.\n"
@@ -1134,93 +1140,93 @@ msgstr ""
 "引导菜单中现有下列条目。\n"
 "您可以创建额外的条目或是更改已存在的条目。"
 
-#: any.pm:595
+#: any.pm:599
 #, c-format
 msgid "access to X programs"
 msgstr "允许使用 X 应用程序"
 
-#: any.pm:596
+#: any.pm:600
 #, c-format
 msgid "access to rpm tools"
 msgstr "允许使用 rpm 工具"
 
-#: any.pm:597
+#: any.pm:601
 #, c-format
 msgid "allow \"su\""
 msgstr "允许使用“su”指令"
 
-#: any.pm:598
+#: any.pm:602
 #, c-format
 msgid "access to administrative files"
 msgstr "允许访问系统设置文件"
 
-#: any.pm:599
+#: any.pm:603
 #, c-format
 msgid "access to network tools"
 msgstr "允许使用网络工具"
 
-#: any.pm:600
+#: any.pm:604
 #, c-format
 msgid "access to compilation tools"
 msgstr "允许使用编译工具"
 
-#: any.pm:605
+#: any.pm:609
 #, c-format
 msgid "(already added %s)"
 msgstr "(已经添加了 %s)"
 
-#: any.pm:610
+#: any.pm:614
 #, c-format
 msgid "This password is too simple"
 msgstr "密码太简单"
 
-#: any.pm:611
+#: any.pm:615
 #, c-format
 msgid "Please give a user name"
 msgstr "请给出用户名"
 
-#: any.pm:612
+#: any.pm:616
 #, c-format
 msgid ""
 "The user name must contain only lower cased letters, numbers, `-' and `_'"
 msgstr "用户名只能包含小写字母、数字、“-”和“_”"
 
-#: any.pm:613
+#: any.pm:617
 #, c-format
 msgid "The user name is too long"
 msgstr "该用户名太长"
 
-#: any.pm:614
+#: any.pm:618
 #, c-format
 msgid "This user name has already been added"
 msgstr "该用户名已经存在"
 
-#: any.pm:615 any.pm:646
+#: any.pm:619 any.pm:651
 #, c-format
 msgid "User ID"
 msgstr "用户 ID"
 
-#: any.pm:616 any.pm:647
+#: any.pm:620 any.pm:652
 #, c-format
 msgid "Group ID"
 msgstr "组 ID"
 
-#: any.pm:619
+#: any.pm:623
 #, c-format
 msgid "%s must be a number"
 msgstr "%s 必须是数字"
 
-#: any.pm:620
+#: any.pm:624
 #, c-format
 msgid "%s should be above 500. Accept anyway?"
 msgstr "%s 应该大于 500。仍然接受吗？"
 
-#: any.pm:625
+#: any.pm:629 standalone/draksambashare:1210
 #, c-format
 msgid "Add user"
 msgstr "添加用户"
 
-#: any.pm:626
+#: any.pm:631
 #, c-format
 msgid ""
 "Enter a user\n"
@@ -1229,77 +1235,77 @@ msgstr ""
 "输入一个用户名\n"
 "%s"
 
-#: any.pm:629 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:154
+#: any.pm:634 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:154
 #: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:81 help.pm:530
 #: interactive/http.pm:151 printer/printerdrake.pm:197
-#: printer/printerdrake.pm:382 printer/printerdrake.pm:5140
+#: printer/printerdrake.pm:382 printer/printerdrake.pm:5141
 #: standalone/drakbackup:2717 standalone/scannerdrake:668
 #: standalone/scannerdrake:818
 #, c-format
 msgid "Done"
 msgstr "完成"
 
-#: any.pm:630 help.pm:51
+#: any.pm:635 help.pm:51
 #, c-format
 msgid "Accept user"
 msgstr "接受用户"
 
-#: any.pm:641
+#: any.pm:646
 #, c-format
 msgid "Real name"
 msgstr "真实姓名"
 
-#: any.pm:642 standalone/drakbackup:1625
+#: any.pm:647 standalone/drakbackup:1625
 #, c-format
 msgid "Login name"
 msgstr "登录名"
 
-#: any.pm:645
+#: any.pm:650
 #, c-format
 msgid "Shell"
 msgstr "Shell"
 
-#: any.pm:649
+#: any.pm:654
 #, c-format
 msgid "Icon"
 msgstr "图标"
 
-#: any.pm:696 security/l10n.pm:14
+#: any.pm:701 security/l10n.pm:14
 #, c-format
 msgid "Autologin"
 msgstr "自动登录"
 
-#: any.pm:697
+#: any.pm:702
 #, c-format
 msgid "I can set up your computer to automatically log on one user."
 msgstr "您可在此设定启动时自动以某用户的身份登入系统。"
 
-#: any.pm:698
+#: any.pm:703
 #, c-format
 msgid "Use this feature"
 msgstr "使用此特性"
 
-#: any.pm:699
+#: any.pm:704
 #, c-format
 msgid "Choose the default user:"
 msgstr "选择默认的用户:"
 
-#: any.pm:700
+#: any.pm:705
 #, c-format
 msgid "Choose the window manager to run:"
 msgstr "选择要运行的窗口管理程序:"
 
-#: any.pm:712 any.pm:779
+#: any.pm:717 any.pm:785
 #, c-format
 msgid "Please choose a language to use."
 msgstr "请选择要使用的语言。"
 
-#: any.pm:713 any.pm:780
+#: any.pm:718 any.pm:786
 #, c-format
 msgid "Language choice"
 msgstr "语言选择"
 
-#: any.pm:740
+#: any.pm:746
 #, c-format
 msgid ""
 "Mandriva Linux can support multiple languages. Select\n"
@@ -1309,66 +1315,71 @@ msgstr ""
 "Mandriva Linux 可以支持多种语言。请选择您想要安装的语言。\n"
 "安装完成并重新启动系统后它们就可以使用。"
 
-#: any.pm:759 any.pm:788 help.pm:647
+#: any.pm:749
+#, c-format
+msgid "Multi languages"
+msgstr "多语言"
+
+#: any.pm:765 any.pm:794 help.pm:647
 #, c-format
 msgid "Use Unicode by default"
 msgstr "默认使用 Unicode"
 
-#: any.pm:760 help.pm:647
+#: any.pm:766 help.pm:647
 #, c-format
 msgid "All languages"
 msgstr "全部语言"
 
-#: any.pm:832 help.pm:566 help.pm:855 install_steps_interactive.pm:953
+#: any.pm:838 help.pm:566 help.pm:855 install_steps_interactive.pm:955
 #, c-format
 msgid "Country / Region"
 msgstr "国家/地区"
 
-#: any.pm:833
+#: any.pm:840
 #, c-format
 msgid "Please choose your country."
 msgstr "请选择您的国家/地区。"
 
-#: any.pm:835
+#: any.pm:842
 #, c-format
 msgid "Here is the full list of available countries"
 msgstr "在此列出了可用的全部国家/地区"
 
-#: any.pm:836
+#: any.pm:843
 #, c-format
 msgid "Other Countries"
 msgstr "其它国家"
 
-#: any.pm:836 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
+#: any.pm:843 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
 #: interactive.pm:393
 #, c-format
 msgid "Advanced"
 msgstr "高级"
 
-#: any.pm:844
+#: any.pm:851
 #, c-format
 msgid "Input method:"
 msgstr "输入法:"
 
-#: any.pm:847 install_any.pm:421 network/netconnect.pm:153
+#: any.pm:854 install_any.pm:421 network/netconnect.pm:153
 #: network/netconnect.pm:309 network/netconnect.pm:314
 #: network/netconnect.pm:1187 printer/printerdrake.pm:105
-#: printer/printerdrake.pm:2428
+#: printer/printerdrake.pm:2429
 #, c-format
 msgid "None"
 msgstr "无"
 
-#: any.pm:964
+#: any.pm:971
 #, c-format
 msgid "No sharing"
 msgstr "禁止共享"
 
-#: any.pm:964
+#: any.pm:971
 #, c-format
 msgid "Allow all users"
 msgstr "允许所有用户使用"
 
-#: any.pm:968
+#: any.pm:975
 #, c-format
 msgid ""
 "Would you like to allow users to share some of their directories?\n"
@@ -1381,42 +1392,42 @@ msgstr ""
 "选择允许, 用户将只需在 Konqueror 和 Nautilus 中单击“共享”即可开放共享。\n"
 "“自定义”允许按照不同用户细分设置。\n"
 
-#: any.pm:980
+#: any.pm:987
 #, c-format
 msgid ""
 "NFS: the traditional Unix file sharing system, with less support on Mac and "
 "Windows."
 msgstr "NFS: 传统的 Unix 文件共享系统, Mac 和 Windows 上支持较少。"
 
-#: any.pm:983
+#: any.pm:990
 #, c-format
 msgid ""
 "SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
 "systems."
 msgstr "SMB: Windows、MacOS X 和其它现代 Linux 系统所用的文件共享系统。"
 
-#: any.pm:991
+#: any.pm:998
 #, c-format
 msgid ""
 "You can export using NFS or SMB. Please select which you would like to use."
 msgstr "您可以使用 NFS 或 Samba 导出。请选择您想要使用的协议。"
 
-#: any.pm:1016
+#: any.pm:1023
 #, c-format
 msgid "Launch userdrake"
 msgstr "运行“Drak 用户管理”"
 
-#: any.pm:1016 printer/printerdrake.pm:4184 printer/printerdrake.pm:4187
-#: printer/printerdrake.pm:4188 printer/printerdrake.pm:4189
-#: printer/printerdrake.pm:5452 standalone/drakTermServ:294
-#: standalone/drakbackup:4097 standalone/drakbug:126 standalone/drakfont:497
+#: any.pm:1023 printer/printerdrake.pm:4185 printer/printerdrake.pm:4188
+#: printer/printerdrake.pm:4189 printer/printerdrake.pm:4190
+#: printer/printerdrake.pm:5453 standalone/drakTermServ:294
+#: standalone/drakbackup:4097 standalone/drakbug:126 standalone/drakfont:498
 #: standalone/drakroam:242 standalone/net_monitor:118
 #: standalone/printerdrake:565
 #, c-format
 msgid "Close"
 msgstr "关闭"
 
-#: any.pm:1018
+#: any.pm:1025
 #, c-format
 msgid ""
 "The per-user sharing uses the group \"fileshare\". \n"
@@ -2239,7 +2250,7 @@ msgstr "退出而不保存分区表吗?"
 msgid "Do you want to save /etc/fstab modifications"
 msgstr "您想要保存 /etc/fstab 修改吗?"
 
-#: diskdrake/interactive.pm:292 install_steps_interactive.pm:330
+#: diskdrake/interactive.pm:292 install_steps_interactive.pm:332
 #, c-format
 msgid "You need to reboot for the partition table modifications to take place"
 msgstr "对分区表的更改要等到重新启动后才能生效"
@@ -2266,7 +2277,7 @@ msgid "Auto allocate"
 msgstr "自动分配"
 
 #: diskdrake/interactive.pm:312 help.pm:530 help.pm:566 help.pm:606
-#: help.pm:855 install_steps_interactive.pm:122
+#: help.pm:855 install_steps_interactive.pm:123
 #, c-format
 msgid "More"
 msgstr "更多"
@@ -2652,8 +2663,8 @@ msgstr "格式化分区 %s 之后, 该分区上的所有数据都将丢失"
 msgid "Move files to the new partition"
 msgstr "移动文件到新分区"
 
-#: diskdrake/interactive.pm:1154 standalone/draksambashare:69
-#: standalone/draksambashare:543
+#: diskdrake/interactive.pm:1154 standalone/draksambashare:75
+#: standalone/draksambashare:138
 #, c-format
 msgid "Hide files"
 msgstr "隐藏文件"
@@ -2953,7 +2964,7 @@ msgstr "搜索新服务器"
 msgid "The package %s needs to be installed. Do you want to install it?"
 msgstr "需要安装软件包 %s。您同意安装吗?"
 
-#: do_pkgs.pm:19 do_pkgs.pm:37 printer/printerdrake.pm:4025
+#: do_pkgs.pm:19 do_pkgs.pm:37 printer/printerdrake.pm:4026
 #, c-format
 msgid "Could not install the %s package!"
 msgstr "无法安装 %s 软件包!"
@@ -3024,9 +3035,9 @@ msgid "Enabling swap partition %s"
 msgstr "正在启用 swap 分区 %s"
 
 #: fs/mount_options.pm:111
-#, fuzzy, c-format
+#, c-format
 msgid "Use an encrypted file system"
-msgstr "挂载点 %s 不能使用用加密的文件系统"
+msgstr "使用加密的文件系统"
 
 #: fs/mount_options.pm:113
 #, c-format
@@ -3102,7 +3113,7 @@ msgstr ""
 "行中用单独的选项 user, exec, dev, suid 加以覆盖)。"
 
 #: fs/mount_options.pm:143
-#, fuzzy, c-format
+#, c-format
 msgid "Enable user disk quota accounting, and optionally enforce limits"
 msgstr "启用用户磁盘配额记账及可选强制限制"
 
@@ -3352,7 +3363,7 @@ msgid "AGP controllers"
 msgstr "AGP 控制器"
 
 #: harddrake/data.pm:324 help.pm:186 help.pm:855
-#: install_steps_interactive.pm:985
+#: install_steps_interactive.pm:987
 #, c-format
 msgid "Printer"
 msgstr "打印机"
@@ -3418,8 +3429,8 @@ msgstr "SMBus 控制器"
 msgid "Bridges and system controllers"
 msgstr "桥接和系统控制器"
 
-#: harddrake/data.pm:447 help.pm:855 install_steps_interactive.pm:118
-#: install_steps_interactive.pm:945 standalone/keyboarddrake:29
+#: harddrake/data.pm:447 help.pm:855 install_steps_interactive.pm:119
+#: install_steps_interactive.pm:947 standalone/keyboarddrake:29
 #, c-format
 msgid "Keyboard"
 msgstr "键盘"
@@ -3429,7 +3440,7 @@ msgstr "键盘"
 msgid "Tablet and touchscreen"
 msgstr "手写板和触摸屏"
 
-#: harddrake/data.pm:469 help.pm:855 install_steps_interactive.pm:978
+#: harddrake/data.pm:469 help.pm:855 install_steps_interactive.pm:980
 #, c-format
 msgid "Mouse"
 msgstr "鼠标"
@@ -3542,20 +3553,20 @@ msgstr "驱动程序: "
 msgid "Trouble shooting"
 msgstr "疑难解答"
 
-#: harddrake/sound.pm:271 keyboard.pm:391 network/ndiswrapper.pm:95
-#: network/netconnect.pm:463 printer/printerdrake.pm:1429
-#: printer/printerdrake.pm:2459 printer/printerdrake.pm:2558
-#: printer/printerdrake.pm:2604 printer/printerdrake.pm:2671
-#: printer/printerdrake.pm:2706 printer/printerdrake.pm:3031
-#: printer/printerdrake.pm:3038 printer/printerdrake.pm:4024
-#: printer/printerdrake.pm:4353 printer/printerdrake.pm:4473
-#: printer/printerdrake.pm:5613 standalone/drakTermServ:326
-#: standalone/drakTermServ:1205 standalone/drakTermServ:1266
-#: standalone/drakTermServ:1931 standalone/drakbackup:497
-#: standalone/drakbackup:596 standalone/drakboot:125 standalone/drakclock:224
-#: standalone/drakconnect:973 standalone/drakups:27 standalone/harddrake2:479
-#: standalone/localedrake:43 standalone/scannerdrake:51
-#: standalone/scannerdrake:940
+#: harddrake/sound.pm:271 install_steps_interactive.pm:1309 keyboard.pm:391
+#: network/ndiswrapper.pm:95 network/netconnect.pm:463
+#: printer/printerdrake.pm:1429 printer/printerdrake.pm:2460
+#: printer/printerdrake.pm:2559 printer/printerdrake.pm:2605
+#: printer/printerdrake.pm:2672 printer/printerdrake.pm:2707
+#: printer/printerdrake.pm:3032 printer/printerdrake.pm:3039
+#: printer/printerdrake.pm:4025 printer/printerdrake.pm:4354
+#: printer/printerdrake.pm:4474 printer/printerdrake.pm:5614
+#: standalone/drakTermServ:326 standalone/drakTermServ:1205
+#: standalone/drakTermServ:1266 standalone/drakTermServ:1931
+#: standalone/drakbackup:497 standalone/drakbackup:596 standalone/drakboot:125
+#: standalone/drakclock:224 standalone/drakconnect:973 standalone/drakups:27
+#: standalone/harddrake2:479 standalone/localedrake:43
+#: standalone/scannerdrake:51 standalone/scannerdrake:940
 #, c-format
 msgid "Warning"
 msgstr "警告"
@@ -3700,7 +3711,7 @@ msgstr "未知|CPH05X (bt878) [很多厂家] "
 msgid "Unknown|CPH06X (bt878) [many vendors]"
 msgstr "未知|CPH06X (bt878) [很多厂家]"
 
-#: harddrake/v4l.pm:394
+#: harddrake/v4l.pm:404
 #, c-format
 msgid ""
 "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
@@ -3712,37 +3723,37 @@ msgstr ""
 "如果自动检测不适合您的卡, 您可以在这里强制设定正确的调协器及卡的类型。只有必"
 "要时才设置电视卡参数。"
 
-#: harddrake/v4l.pm:397
+#: harddrake/v4l.pm:407
 #, c-format
 msgid "Card model:"
 msgstr "卡的型号: "
 
-#: harddrake/v4l.pm:398
+#: harddrake/v4l.pm:408
 #, c-format
 msgid "Tuner type:"
 msgstr "调谐器类型: "
 
-#: harddrake/v4l.pm:399
+#: harddrake/v4l.pm:409
 #, c-format
 msgid "Number of capture buffers:"
 msgstr "捕获缓冲区数量: "
 
-#: harddrake/v4l.pm:399
+#: harddrake/v4l.pm:409
 #, c-format
 msgid "number of capture buffers for mmap'ed capture"
 msgstr "用于 mmap 捕获的缓冲区数量"
 
-#: harddrake/v4l.pm:401
+#: harddrake/v4l.pm:411
 #, c-format
 msgid "PLL setting:"
 msgstr "PLL 设置: "
 
-#: harddrake/v4l.pm:402
+#: harddrake/v4l.pm:412
 #, c-format
 msgid "Radio support:"
 msgstr "无线电支持: "
 
-#: harddrake/v4l.pm:402
+#: harddrake/v4l.pm:412
 #, c-format
 msgid "enable radio support"
 msgstr "启用无线电支持"
@@ -3759,8 +3770,8 @@ msgstr ""
 "版。如果您同意其中的全部条款, 请选中\"%s\"框。如果不同意, 单击\"%s\"按钮将重"
 "新启动您的计算机。"
 
-#: help.pm:14 install_steps_gtk.pm:557 install_steps_interactive.pm:91
-#: install_steps_interactive.pm:736 standalone/drakautoinst:214
+#: help.pm:14 install_steps_gtk.pm:557 install_steps_interactive.pm:92
+#: install_steps_interactive.pm:738 standalone/drakautoinst:214
 #, c-format
 msgid "Accept"
 msgstr "接受"
@@ -3833,14 +3844,15 @@ msgstr ""
 "登录到系统。如果您对此特性感兴趣(也不考虑太多的本地安全性), 请选择希望的用户"
 "和窗口管理器, 然后单击\"%s\"。如果您对此特性不感兴趣, 请不要选中\"%s\"框。"
 
-#: help.pm:51 printer/printerdrake.pm:1885 printer/printerdrake.pm:2006
+#: help.pm:51 printer/printerdrake.pm:1886 printer/printerdrake.pm:2007
+#: standalone/draksambashare:54
 #, c-format
 msgid "User name"
 msgstr "用户名"
 
 #: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:237
 #: install_steps_gtk.pm:699 interactive.pm:432 interactive/newt.pm:321
-#: network/thirdparty.pm:322 printer/printerdrake.pm:3961
+#: network/thirdparty.pm:322 printer/printerdrake.pm:3962
 #: standalone/drakTermServ:384 standalone/drakbackup:3954
 #: standalone/drakbackup:4048 standalone/drakbackup:4065
 #: standalone/drakbackup:4083 ugtk2.pm:510
@@ -4054,7 +4066,7 @@ msgstr "开发"
 msgid "Graphical Environment"
 msgstr "图形环境"
 
-#: help.pm:146 install_steps_gtk.pm:235 install_steps_interactive.pm:643
+#: help.pm:146 install_steps_gtk.pm:235 install_steps_interactive.pm:645
 #, c-format
 msgid "Individual package selection"
 msgstr "选择单个软件包"
@@ -4064,7 +4076,7 @@ msgstr "选择单个软件包"
 msgid "Upgrade"
 msgstr "升级"
 
-#: help.pm:146 install_steps_interactive.pm:601
+#: help.pm:146 install_steps_interactive.pm:603
 #, c-format
 msgid "With X"
 msgstr "安装 X"
@@ -4146,7 +4158,7 @@ msgstr ""
 
 #: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:904
 #: interactive.pm:157 modules/interactive.pm:71 standalone/drakbackup:2517
-#: standalone/draksec:54 standalone/harddrake2:309 ugtk2.pm:915 wizards.pm:156
+#: standalone/draksec:54 standalone/harddrake2:309 ugtk2.pm:917 wizards.pm:156
 #, c-format
 msgid "No"
 msgstr "否"
@@ -4154,7 +4166,7 @@ msgstr "否"
 #: help.pm:180 help.pm:285 help.pm:444 install_any.pm:904 interactive.pm:157
 #: modules/interactive.pm:71 printer/printerdrake.pm:883
 #: printer/printerdrake.pm:898 standalone/drakbackup:2517
-#: standalone/draksec:55 standalone/harddrake2:308 ugtk2.pm:915 wizards.pm:156
+#: standalone/draksec:55 standalone/harddrake2:308 ugtk2.pm:917 wizards.pm:156
 #, c-format
 msgid "Yes"
 msgstr "是"
@@ -4250,7 +4262,7 @@ msgstr ""
 "Internet。最好选择地理位置离您较近的时间服务器。此选项还会自动安装时间服务"
 "器, 这样您局域网中的其它计算机都能够进行自动校时了。"
 
-#: help.pm:217 install_steps_interactive.pm:880
+#: help.pm:217 install_steps_interactive.pm:882
 #, c-format
 msgid "Hardware clock set to GMT"
 msgstr "您的系统时钟设定为 GMT"
@@ -4671,17 +4683,17 @@ msgstr ""
 msgid "Generate auto-install floppy"
 msgstr "生成自动安装软盘"
 
-#: help.pm:409 install_steps_interactive.pm:1331
+#: help.pm:409 install_steps_interactive.pm:1335
 #, c-format
 msgid "Replay"
 msgstr "重现"
 
-#: help.pm:409 install_steps_interactive.pm:1331
+#: help.pm:409 install_steps_interactive.pm:1335
 #, c-format
 msgid "Automated"
 msgstr "自动"
 
-#: help.pm:409 install_steps_interactive.pm:1334
+#: help.pm:409 install_steps_interactive.pm:1338
 #, c-format
 msgid "Save packages selection"
 msgstr "保存软件包选择"
@@ -4731,7 +4743,7 @@ msgstr ""
 "如果您想要选择要检测磁盘上的坏块, 请单击单击\"%s\"。"
 
 #: help.pm:431 install_steps_gtk.pm:392 interactive.pm:433
-#: interactive/newt.pm:318 printer/printerdrake.pm:3959
+#: interactive/newt.pm:318 printer/printerdrake.pm:3960
 #: standalone/drakTermServ:363 standalone/drakbackup:3914
 #: standalone/drakbackup:3953 standalone/drakbackup:4064
 #: standalone/drakbackup:4079 ugtk2.pm:508
@@ -4768,7 +4780,7 @@ msgstr ""
 "s\"来获取并安装选中的软件包, 要终止请单击\"%s\"。"
 
 #: help.pm:444 help.pm:588 install_steps_gtk.pm:391
-#: install_steps_interactive.pm:156 standalone/drakbackup:4111
+#: install_steps_interactive.pm:157 standalone/drakbackup:4111
 #, c-format
 msgid "Install"
 msgstr "安装"
@@ -5498,8 +5510,8 @@ msgstr ""
 "\"%s\"：如果在您的系统中检测到了声卡, 则会在此处显示。如果您发现在此显示的声"
 "卡与您系统中实际安装的声卡并不相同, 您可以单击该按钮选择不同的驱动程序。"
 
-#: help.pm:788 help.pm:855 install_steps_interactive.pm:1012
-#: install_steps_interactive.pm:1029
+#: help.pm:788 help.pm:855 install_steps_interactive.pm:1014
+#: install_steps_interactive.pm:1031
 #, c-format
 msgid "Sound card"
 msgstr "声卡"
@@ -5631,12 +5643,13 @@ msgstr ""
 " * \"%s\"：在此您可以精确调整要在您的计算机上运行哪些服务。如果您要将此计算机"
 "用作服务器, 那么应该复查这一设置。"
 
-#: help.pm:855 install_steps_interactive.pm:971 standalone/drakclock:100
+#: help.pm:855 install_steps_interactive.pm:878
+#: install_steps_interactive.pm:973 standalone/drakclock:100
 #, c-format
 msgid "Timezone"
 msgstr "时区"
 
-#: help.pm:855 install_steps_interactive.pm:1045
+#: help.pm:855 install_steps_interactive.pm:1047
 #, c-format
 msgid "TV card"
 msgstr "电视卡"
@@ -5651,33 +5664,34 @@ msgstr "ISDN 卡"
 msgid "Graphical Interface"
 msgstr "图形界面"
 
-#: help.pm:855 install_any.pm:1688 install_steps_interactive.pm:1063
+#: help.pm:855 install_any.pm:1688 install_steps_interactive.pm:1065
 #: standalone/drakbackup:2035
 #, c-format
 msgid "Network"
 msgstr "网络"
 
-#: help.pm:855 install_steps_interactive.pm:1075
+#: help.pm:855 install_steps_interactive.pm:1077
 #, c-format
 msgid "Proxies"
 msgstr "代理服务器"
 
-#: help.pm:855 install_steps_interactive.pm:1086
+#: help.pm:855 install_steps_interactive.pm:1088
 #, c-format
 msgid "Security Level"
 msgstr "安全级别"
 
-#: help.pm:855 install_steps_interactive.pm:1100
+#: help.pm:855 install_steps_interactive.pm:1102 network/drakfirewall.pm:182
 #, c-format
 msgid "Firewall"
 msgstr "防火墙"
 
-#: help.pm:855 install_steps_interactive.pm:1116
+#: help.pm:855 install_steps_interactive.pm:1118
 #, c-format
 msgid "Bootloader"
 msgstr "引导程序"
 
-#: help.pm:855 install_steps_interactive.pm:1129 services.pm:193
+#: help.pm:855 install_steps_interactive.pm:1131 services.pm:114
+#: services.pm:157 services.pm:193
 #, c-format
 msgid "Services"
 msgstr "服务"
@@ -5752,8 +5766,8 @@ msgstr ""
 "\n"
 "您是否有要配置的赠品安装介质?"
 
-#: install_any.pm:421 printer/printerdrake.pm:3289
-#: printer/printerdrake.pm:3296 standalone/scannerdrake:182
+#: install_any.pm:421 printer/printerdrake.pm:3290
+#: printer/printerdrake.pm:3297 standalone/scannerdrake:182
 #: standalone/scannerdrake:190 standalone/scannerdrake:241
 #: standalone/scannerdrake:248
 #, c-format
@@ -6498,12 +6512,13 @@ msgstr ""
 "如果您真的遇到问题的话，可以试试文本安装。要进入文本安装，请在启动时按“F1”，"
 "然后输入“text”。"
 
-#: install_steps_gtk.pm:228 install_steps_interactive.pm:625
+#: install_steps_gtk.pm:211 install_steps_gtk.pm:228
+#: install_steps_interactive.pm:627
 #, c-format
 msgid "Package Group Selection"
 msgstr "程序组选择"
 
-#: install_steps_gtk.pm:254 install_steps_interactive.pm:568
+#: install_steps_gtk.pm:254 install_steps_interactive.pm:570
 #, c-format
 msgid "Total size: %d / %d MB"
 msgstr "总共大小: %d / %d MB"
@@ -6619,12 +6634,12 @@ msgstr "更新软件包选择"
 msgid "Minimal install"
 msgstr "最小安装"
 
-#: install_steps_gtk.pm:414 install_steps_interactive.pm:484
+#: install_steps_gtk.pm:414 install_steps_interactive.pm:486
 #, c-format
 msgid "Choose the packages you want to install"
 msgstr "选择您想要安装的软件包"
 
-#: install_steps_gtk.pm:430 install_steps_interactive.pm:711
+#: install_steps_gtk.pm:430 install_steps_interactive.pm:713
 #, c-format
 msgid "Installing"
 msgstr "正在安装"
@@ -6659,13 +6674,13 @@ msgstr "%d 个软件包"
 msgid "Installing package %s"
 msgstr "正在安装软件包 %s"
 
-#: install_steps_gtk.pm:557 install_steps_interactive.pm:91
-#: install_steps_interactive.pm:736
+#: install_steps_gtk.pm:557 install_steps_interactive.pm:92
+#: install_steps_interactive.pm:738
 #, c-format
 msgid "Refuse"
 msgstr "拒绝"
 
-#: install_steps_gtk.pm:561 install_steps_interactive.pm:740
+#: install_steps_gtk.pm:561 install_steps_interactive.pm:742
 #, c-format
 msgid ""
 "Change your Cd-Rom!\n"
@@ -6678,24 +6693,29 @@ msgstr ""
 "请在驱动器中插入标有“%s”的光盘, 然后单击“确定”。\n"
 "如果您没有这张光盘, 请单击“取消”, 放弃安装这张光盘上的软件。"
 
-#: install_steps_gtk.pm:576 install_steps_interactive.pm:751
+#: install_steps_gtk.pm:576 install_steps_interactive.pm:753
 #, c-format
 msgid "There was an error ordering packages:"
 msgstr "排列软件包时出错: "
 
 #: install_steps_gtk.pm:576 install_steps_gtk.pm:580
-#: install_steps_interactive.pm:751 install_steps_interactive.pm:755
+#: install_steps_interactive.pm:753 install_steps_interactive.pm:757
 #, c-format
 msgid "Go on anyway?"
 msgstr "真的要继续?"
 
-#: install_steps_gtk.pm:580 install_steps_interactive.pm:755
+#: install_steps_gtk.pm:580 install_steps_interactive.pm:757
 #, c-format
 msgid "There was an error installing packages:"
 msgstr "安装软件包时出错: "
 
-#: install_steps_gtk.pm:622 install_steps_interactive.pm:927
-#: install_steps_interactive.pm:1076
+#: install_steps_gtk.pm:599 install_steps_interactive.pm:933 steps.pm:30
+#, c-format
+msgid "Summary"
+msgstr "概要"
+
+#: install_steps_gtk.pm:622 install_steps_interactive.pm:929
+#: install_steps_interactive.pm:1078
 #, c-format
 msgid "not configured"
 msgstr "未配置"
@@ -6731,107 +6751,112 @@ msgstr "复制整张光盘"
 msgid "License agreement"
 msgstr "许可协议"
 
-#: install_steps_interactive.pm:88
+#: install_steps_interactive.pm:89
 #, c-format
 msgid "Release Notes"
 msgstr "版本通告"
 
-#: install_steps_interactive.pm:119
+#: install_steps_interactive.pm:120
 #, c-format
 msgid "Please choose your keyboard layout."
 msgstr "请选择您使用的键盘布局。"
 
-#: install_steps_interactive.pm:121
+#: install_steps_interactive.pm:122
 #, c-format
 msgid "Here is the full list of available keyboards"
 msgstr "在此列出了可用的全部键盘"
 
-#: install_steps_interactive.pm:151
+#: install_steps_interactive.pm:152
 #, c-format
 msgid "Install/Upgrade"
 msgstr "安装/升级"
 
-#: install_steps_interactive.pm:152
+#: install_steps_interactive.pm:153
 #, c-format
 msgid "Is this an install or an upgrade?"
 msgstr "现在要新装还是升级?"
 
-#: install_steps_interactive.pm:158
+#: install_steps_interactive.pm:159
 #, c-format
 msgid "Upgrade %s"
 msgstr "升级 %s"
 
-#: install_steps_interactive.pm:169
+#: install_steps_interactive.pm:170
 #, c-format
 msgid "Encryption key for %s"
 msgstr "%s 的加密密钥"
 
-#: install_steps_interactive.pm:186
+#: install_steps_interactive.pm:187
 #, c-format
 msgid "Please choose your type of mouse."
 msgstr "请选择您的鼠标类型。"
 
-#: install_steps_interactive.pm:195 standalone/mousedrake:46
+#: install_steps_interactive.pm:188
+#, c-format
+msgid "Mouse choice"
+msgstr ""
+
+#: install_steps_interactive.pm:197 standalone/mousedrake:46
 #, c-format
 msgid "Mouse Port"
 msgstr "鼠标端口"
 
-#: install_steps_interactive.pm:196 standalone/mousedrake:47
+#: install_steps_interactive.pm:198 standalone/mousedrake:47
 #, c-format
 msgid "Please choose which serial port your mouse is connected to."
 msgstr "请选择您的鼠标是连接到那个串行口。"
 
-#: install_steps_interactive.pm:206
+#: install_steps_interactive.pm:208
 #, c-format
 msgid "Buttons emulation"
 msgstr "鼠标键模拟"
 
-#: install_steps_interactive.pm:208
+#: install_steps_interactive.pm:210
 #, c-format
 msgid "Button 2 Emulation"
 msgstr "两键模拟"
 
-#: install_steps_interactive.pm:209
+#: install_steps_interactive.pm:211
 #, c-format
 msgid "Button 3 Emulation"
 msgstr "模拟三键"
 
-#: install_steps_interactive.pm:230
+#: install_steps_interactive.pm:232
 #, c-format
 msgid "PCMCIA"
 msgstr "PCMCIA"
 
-#: install_steps_interactive.pm:230
+#: install_steps_interactive.pm:232
 #, c-format
 msgid "Configuring PCMCIA cards..."
 msgstr "正在配置 PCMCIA 卡..."
 
-#: install_steps_interactive.pm:237
+#: install_steps_interactive.pm:239
 #, c-format
 msgid "IDE"
 msgstr "IDE"
 
-#: install_steps_interactive.pm:237
+#: install_steps_interactive.pm:239
 #, c-format
 msgid "Configuring IDE"
 msgstr "配置 IDE"
 
-#: install_steps_interactive.pm:257
+#: install_steps_interactive.pm:259
 #, c-format
 msgid "No partition available"
 msgstr "没有可用的硬盘分区"
 
-#: install_steps_interactive.pm:260
+#: install_steps_interactive.pm:262
 #, c-format
 msgid "Scanning partitions to find mount points"
 msgstr "正在扫描各个分区以查找挂载点"
 
-#: install_steps_interactive.pm:267
+#: install_steps_interactive.pm:269
 #, c-format
 msgid "Choose the mount points"
 msgstr "选择挂载点"
 
-#: install_steps_interactive.pm:313
+#: install_steps_interactive.pm:315
 #, c-format
 msgid ""
 "No free space for 1MB bootstrap! Install will continue, but to boot your "
@@ -6840,7 +6865,7 @@ msgstr ""
 "无法创建启动空间(1MB)！安装将继续, 但如需启动系统, 您可用“Drak 磁盘管理”创建"
 "启动分区"
 
-#: install_steps_interactive.pm:318
+#: install_steps_interactive.pm:320
 #, c-format
 msgid ""
 "You'll need to create a PPC PReP Boot bootstrap! Install will continue, but "
@@ -6850,61 +6875,61 @@ msgstr ""
 "您需要创建一个 PPC PReP 启动空间！安装将继续, 但如需启动系统, 您可用“Drak 磁"
 "盘管理”创建启动分区"
 
-#: install_steps_interactive.pm:354
+#: install_steps_interactive.pm:356
 #, c-format
 msgid "Choose the partitions you want to format"
 msgstr "选择您要格式化的分区"
 
-#: install_steps_interactive.pm:356
+#: install_steps_interactive.pm:358
 #, c-format
 msgid "Check bad blocks?"
 msgstr "是否检查坏磁块?"
 
-#: install_steps_interactive.pm:384
+#: install_steps_interactive.pm:386
 #, c-format
 msgid ""
 "Failed to check filesystem %s. Do you want to repair the errors? (beware, "
 "you can lose data)"
 msgstr "检查文件系统 %s 失败。您想修复错误吗?(注意, 有可能丢失数据)"
 
-#: install_steps_interactive.pm:387
+#: install_steps_interactive.pm:389
 #, c-format
 msgid "Not enough swap space to fulfill installation, please add some"
 msgstr "交换空间太少, 无法完成安装, 请扩大交换分区。"
 
-#: install_steps_interactive.pm:394
+#: install_steps_interactive.pm:396
 #, c-format
 msgid "Looking for available packages and rebuilding rpm database..."
 msgstr "正在寻找可安装的程序并重建 rpm 数据库..."
 
-#: install_steps_interactive.pm:395 install_steps_interactive.pm:453
+#: install_steps_interactive.pm:397 install_steps_interactive.pm:455
 #, c-format
 msgid "Looking for available packages..."
 msgstr "正在寻找可安装的程序..."
 
-#: install_steps_interactive.pm:398
+#: install_steps_interactive.pm:400
 #, c-format
 msgid "Looking at packages already installed..."
 msgstr "正在查找已经安装过的软件包..."
 
-#: install_steps_interactive.pm:402
+#: install_steps_interactive.pm:404
 #, c-format
 msgid "Finding packages to upgrade..."
 msgstr "正在寻找可升级的程序..."
 
-#: install_steps_interactive.pm:422 install_steps_interactive.pm:831
+#: install_steps_interactive.pm:424 install_steps_interactive.pm:833
 #, c-format
 msgid "Choose a mirror from which to get the packages"
 msgstr "选择一个镜像网站来取得软件包"
 
-#: install_steps_interactive.pm:462
+#: install_steps_interactive.pm:464
 #, c-format
 msgid ""
 "Your system does not have enough space left for installation or upgrade (%d "
 "> %d)"
 msgstr "您的系统所剩余的空间不够进行安装或升级(%d > %d)"
 
-#: install_steps_interactive.pm:496
+#: install_steps_interactive.pm:498
 #, c-format
 msgid ""
 "Please choose load or save package selection.\n"
@@ -6913,55 +6938,55 @@ msgstr ""
 "请选择装入或保存软件包选择息。\n"
 "格式与自动安装生成的文件一样。"
 
-#: install_steps_interactive.pm:498
+#: install_steps_interactive.pm:500
 #, c-format
 msgid "Load"
 msgstr "装入"
 
-#: install_steps_interactive.pm:498 standalone/drakbackup:3932
+#: install_steps_interactive.pm:500 standalone/drakbackup:3932
 #: standalone/drakbackup:4005 standalone/drakroam:210 standalone/logdrake:172
 #, c-format
 msgid "Save"
 msgstr "保存"
 
-#: install_steps_interactive.pm:506
+#: install_steps_interactive.pm:508
 #, c-format
 msgid "Bad file"
 msgstr "文件有错"
 
-#: install_steps_interactive.pm:582
+#: install_steps_interactive.pm:584
 #, c-format
 msgid "Selected size is larger than available space"
 msgstr "您选择的超过可用空间"
 
-#: install_steps_interactive.pm:597
+#: install_steps_interactive.pm:599
 #, c-format
 msgid "Type of install"
 msgstr "安装类型"
 
-#: install_steps_interactive.pm:598
+#: install_steps_interactive.pm:600
 #, c-format
 msgid ""
 "You have not selected any group of packages.\n"
 "Please choose the minimal installation you want:"
 msgstr "您没有选择任何的组件, 请选择最小安装:"
 
-#: install_steps_interactive.pm:602
+#: install_steps_interactive.pm:604
 #, c-format
 msgid "With basic documentation (recommended!)"
 msgstr "安装基础文档(建议!)"
 
-#: install_steps_interactive.pm:603
+#: install_steps_interactive.pm:605
 #, c-format
 msgid "Truly minimal install (especially no urpmi)"
 msgstr "真正最小安装(注意没有 urpmi 包管理工具)"
 
-#: install_steps_interactive.pm:642 standalone/drakxtv:52
+#: install_steps_interactive.pm:644 standalone/drakxtv:52
 #, c-format
 msgid "All"
 msgstr "全部"
 
-#: install_steps_interactive.pm:681
+#: install_steps_interactive.pm:683
 #, c-format
 msgid ""
 "If you have all the CDs in the list below, click Ok.\n"
@@ -6972,17 +6997,17 @@ msgstr ""
 "如果您没有其中任何一张, 单击“取消”。\n"
 "如果您缺少其中一张, 清除它的选中标记, 然后单击“确认”。"
 
-#: install_steps_interactive.pm:686
+#: install_steps_interactive.pm:688
 #, c-format
 msgid "Cd-Rom labeled \"%s\""
 msgstr "标为 %s 的光盘"
 
-#: install_steps_interactive.pm:711
+#: install_steps_interactive.pm:713
 #, c-format
 msgid "Preparing installation"
 msgstr "正在准备安装"
 
-#: install_steps_interactive.pm:720
+#: install_steps_interactive.pm:722
 #, c-format
 msgid ""
 "Installing package %s\n"
@@ -6991,17 +7016,22 @@ msgstr ""
 "正在安装软件包 %s \n"
 "%d%%"
 
-#: install_steps_interactive.pm:769
+#: install_steps_interactive.pm:771
 #, c-format
 msgid "Post-install configuration"
 msgstr "安装后的配置"
 
-#: install_steps_interactive.pm:776
+#: install_steps_interactive.pm:778
 #, c-format
 msgid "Please ensure the Update Modules media is in drive %s"
 msgstr "请确定更新模块介质位于驱动器 %s"
 
-#: install_steps_interactive.pm:805
+#: install_steps_interactive.pm:806
+#, c-format
+msgid "Updates"
+msgstr ""
+
+#: install_steps_interactive.pm:807
 #, c-format
 msgid ""
 "You now have the opportunity to download updated packages. These packages\n"
@@ -7020,147 +7050,142 @@ msgstr ""
 "\n"
 "您是否要安装升级包?"
 
-#: install_steps_interactive.pm:826
+#: install_steps_interactive.pm:828
 #, c-format
 msgid ""
 "Contacting Mandriva Linux web site to get the list of available mirrors..."
 msgstr "正在连接 Mandriva Linux 网站获得可用镜像的列表..."
 
-#: install_steps_interactive.pm:845
+#: install_steps_interactive.pm:847
 #, c-format
 msgid "Contacting the mirror to get the list of available packages..."
 msgstr "正在连接镜像网站以取得可供安装的软件包的列表..."
 
-#: install_steps_interactive.pm:849
+#: install_steps_interactive.pm:851
 #, c-format
 msgid "Unable to contact mirror %s"
 msgstr "无法连接镜像 %s"
 
-#: install_steps_interactive.pm:849
+#: install_steps_interactive.pm:851
 #, c-format
 msgid "Would you like to try again?"
 msgstr "您是否想要再试一次?"
 
-#: install_steps_interactive.pm:876 standalone/drakclock:45
+#: install_steps_interactive.pm:878 standalone/drakclock:45
 #, c-format
 msgid "Which is your timezone?"
 msgstr "您所在的时区?"
 
-#: install_steps_interactive.pm:881
+#: install_steps_interactive.pm:883
 #, c-format
 msgid "Automatic time synchronization (using NTP)"
 msgstr "自动时间同步(使用 NTP)"
 
-#: install_steps_interactive.pm:889
+#: install_steps_interactive.pm:891
 #, c-format
 msgid "NTP Server"
 msgstr "NTP 服务器"
 
-#: install_steps_interactive.pm:931 steps.pm:30
-#, c-format
-msgid "Summary"
-msgstr "概要"
-
-#: install_steps_interactive.pm:944 install_steps_interactive.pm:952
-#: install_steps_interactive.pm:970 install_steps_interactive.pm:977
-#: install_steps_interactive.pm:1128 services.pm:133
+#: install_steps_interactive.pm:946 install_steps_interactive.pm:954
+#: install_steps_interactive.pm:972 install_steps_interactive.pm:979
+#: install_steps_interactive.pm:1130 services.pm:133
 #: standalone/drakbackup:1576
 #, c-format
 msgid "System"
 msgstr "系统"
 
-#: install_steps_interactive.pm:984 install_steps_interactive.pm:1011
-#: install_steps_interactive.pm:1028 install_steps_interactive.pm:1044
-#: install_steps_interactive.pm:1055
+#: install_steps_interactive.pm:986 install_steps_interactive.pm:1013
+#: install_steps_interactive.pm:1030 install_steps_interactive.pm:1046
+#: install_steps_interactive.pm:1057
 #, c-format
 msgid "Hardware"
 msgstr "硬件"
 
-#: install_steps_interactive.pm:990 install_steps_interactive.pm:999
+#: install_steps_interactive.pm:992 install_steps_interactive.pm:1001
 #, c-format
 msgid "Remote CUPS server"
 msgstr "远程 CUPS 服务器"
 
-#: install_steps_interactive.pm:990
+#: install_steps_interactive.pm:992
 #, c-format
 msgid "No printer"
 msgstr "没有打印机"
 
-#: install_steps_interactive.pm:1032
+#: install_steps_interactive.pm:1034
 #, c-format
 msgid "Do you have an ISA sound card?"
 msgstr "您有 ISA 声卡吗?"
 
-#: install_steps_interactive.pm:1034
+#: install_steps_interactive.pm:1036
 #, c-format
 msgid ""
 "Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound "
 "card"
 msgstr "安装之后运行“alsaconf”或“sndconfig”来配置您的声卡"
 
-#: install_steps_interactive.pm:1036
+#: install_steps_interactive.pm:1038
 #, c-format
 msgid "No sound card detected. Try \"harddrake\" after installation"
 msgstr "没有检测到声卡。请在安装之后尝试“Drak 硬件配置”。"
 
-#: install_steps_interactive.pm:1056
+#: install_steps_interactive.pm:1058
 #, c-format
 msgid "Graphical interface"
 msgstr "图形界面"
 
-#: install_steps_interactive.pm:1062 install_steps_interactive.pm:1074
+#: install_steps_interactive.pm:1064 install_steps_interactive.pm:1076
 #, c-format
 msgid "Network & Internet"
 msgstr "网络和 Internet"
 
-#: install_steps_interactive.pm:1076
+#: install_steps_interactive.pm:1078
 #, c-format
 msgid "configured"
 msgstr "已配置"
 
-#: install_steps_interactive.pm:1085 install_steps_interactive.pm:1099
-#: steps.pm:20
+#: install_steps_interactive.pm:1087 install_steps_interactive.pm:1101
+#: security/level.pm:55 steps.pm:20
 #, c-format
 msgid "Security"
 msgstr "安全"
 
-#: install_steps_interactive.pm:1104
+#: install_steps_interactive.pm:1106
 #, c-format
 msgid "activated"
 msgstr "已激活"
 
-#: install_steps_interactive.pm:1104
+#: install_steps_interactive.pm:1106
 #, c-format
 msgid "disabled"
 msgstr "已禁用"
 
-#: install_steps_interactive.pm:1115
+#: install_steps_interactive.pm:1117
 #, c-format
 msgid "Boot"
 msgstr "启动"
 
 #. -PO: example: lilo-graphic on /dev/hda1
-#: install_steps_interactive.pm:1119 printer/printerdrake.pm:974
+#: install_steps_interactive.pm:1121 printer/printerdrake.pm:974
 #, c-format
 msgid "%s on %s"
 msgstr "位于 %2$s 上的 %1$s"
 
-#: install_steps_interactive.pm:1133 services.pm:175
+#: install_steps_interactive.pm:1135 services.pm:175
 #, c-format
 msgid "Services: %d activated for %d registered"
 msgstr "服务: %2$d 项已注册, %1$d 项已激活"
 
-#: install_steps_interactive.pm:1143
+#: install_steps_interactive.pm:1145
 #, c-format
 msgid "You have not configured X. Are you sure you really want this?"
 msgstr "您还没有配置过 X。您真的想要这样吗?"
 
-#: install_steps_interactive.pm:1224
+#: install_steps_interactive.pm:1226
 #, c-format
 msgid "Preparing bootloader..."
 msgstr "正在准备引导程序..."
 
-#: install_steps_interactive.pm:1234
+#: install_steps_interactive.pm:1236
 #, c-format
 msgid ""
 "You appear to have an OldWorld or Unknown machine, the yaboot bootloader "
@@ -7172,12 +7197,12 @@ msgstr ""
 "续, 不过您需要使用 BootX 或其它方式启动您的机器。根文件系统的内核参数是："
 "root=%s"
 
-#: install_steps_interactive.pm:1240
+#: install_steps_interactive.pm:1242
 #, c-format
 msgid "Do you want to use aboot?"
 msgstr "您要使用 aboot 吗?"
 
-#: install_steps_interactive.pm:1243
+#: install_steps_interactive.pm:1245
 #, c-format
 msgid ""
 "Error installing aboot, \n"
@@ -7186,29 +7211,29 @@ msgstr ""
 "安装 aboot 时出错, \n"
 "强迫安装会毁坏第一个分区, 要继续吗?"
 
-#: install_steps_interactive.pm:1260
+#: install_steps_interactive.pm:1262
 #, c-format
 msgid ""
 "In this security level, access to the files in the Windows partition is "
 "restricted to the administrator."
 msgstr "在此安全级别中, 只有管理员才能访问 Windows 分区中的文件。"
 
-#: install_steps_interactive.pm:1289 standalone/drakautoinst:76
+#: install_steps_interactive.pm:1291 standalone/drakautoinst:76
 #, c-format
 msgid "Insert a blank floppy in drive %s"
 msgstr "请在驱动器 %s 中插入一张空白软盘"
 
-#: install_steps_interactive.pm:1294
+#: install_steps_interactive.pm:1296
 #, c-format
 msgid "Please insert another floppy for drivers disk"
 msgstr "请插入另外一张软盘, 作为驱动程序盘"
 
-#: install_steps_interactive.pm:1296
+#: install_steps_interactive.pm:1298
 #, c-format
 msgid "Creating auto install floppy..."
 msgstr "正在创建自动安装软盘..."
 
-#: install_steps_interactive.pm:1308
+#: install_steps_interactive.pm:1310
 #, c-format
 msgid ""
 "Some steps are not completed.\n"
@@ -7219,12 +7244,19 @@ msgstr ""
 "\n"
 "您真的要现在退出吗?"
 
-#: install_steps_interactive.pm:1324
+#: install_steps_interactive.pm:1320 standalone/draksambashare:416
+#: standalone/draksambashare:523 standalone/drakups:120 standalone/drakups:159
+#: standalone/logdrake:449 standalone/logdrake:455
+#, c-format
+msgid "Congratulations"
+msgstr "恭喜"
+
+#: install_steps_interactive.pm:1328 install_steps_interactive.pm:1329
 #, c-format
 msgid "Generate auto install floppy"
 msgstr "生成自动安装软盘"
 
-#: install_steps_interactive.pm:1326
+#: install_steps_interactive.pm:1330
 #, c-format
 msgid ""
 "The auto install can be fully automated if wanted,\n"
@@ -7257,24 +7289,27 @@ msgid "Choose a file"
 msgstr "选择文件"
 
 #: interactive.pm:317 interactive/gtk.pm:507 standalone/drakbackup:1517
-#: standalone/drakfont:654 standalone/drakhosts:244 standalone/draknfs:594
-#: standalone/drakroam:218 standalone/draksambashare:595
+#: standalone/drakfont:655 standalone/drakhosts:242 standalone/draknfs:589
+#: standalone/drakroam:218 standalone/draksambashare:1123
 #: standalone/drakups:301 standalone/drakups:361 standalone/drakups:381
 #: standalone/drakvpn:319 standalone/drakvpn:680
 #, c-format
 msgid "Add"
 msgstr "添加"
 
-#: interactive.pm:317 interactive/gtk.pm:507 standalone/drakhosts:251
-#: standalone/draknfs:601 standalone/draksambashare:605
+#: interactive.pm:317 interactive/gtk.pm:507 standalone/drakhosts:249
+#: standalone/draknfs:596 standalone/draksambashare:1080
+#: standalone/draksambashare:1133 standalone/draksambashare:1172
 #, c-format
 msgid "Modify"
 msgstr "修改"
 
-#: interactive.pm:317 interactive/gtk.pm:507 standalone/drakhosts:258
-#: standalone/draknfs:608 standalone/drakroam:202
-#: standalone/draksambashare:612 standalone/drakups:303 standalone/drakups:363
-#: standalone/drakups:383 standalone/drakvpn:319 standalone/drakvpn:680
+#: interactive.pm:317 interactive/gtk.pm:507 standalone/drakhosts:256
+#: standalone/draknfs:603 standalone/drakroam:202
+#: standalone/draksambashare:1081 standalone/draksambashare:1141
+#: standalone/draksambashare:1180 standalone/drakups:303
+#: standalone/drakups:363 standalone/drakups:383 standalone/drakvpn:319
+#: standalone/drakvpn:680
 #, c-format
 msgid "Remove"
 msgstr "删除"
@@ -9800,7 +9835,7 @@ msgstr ""
 msgid "Which services would you like to allow the Internet to connect to?"
 msgstr "您想要本机上开放哪些服务?"
 
-#: network/drakfirewall.pm:182
+#: network/drakfirewall.pm:184
 #, c-format
 msgid ""
 "You can enter miscellaneous ports. \n"
@@ -9811,7 +9846,7 @@ msgstr ""
 "例如, 可以这样: 139/tcp 139/udp 600:610/tcp 600:610/udp。\n"
 "请参考 /etc/services 文件。"
 
-#: network/drakfirewall.pm:188
+#: network/drakfirewall.pm:190
 #, c-format
 msgid ""
 "Invalid port given: %s.\n"
@@ -9826,12 +9861,12 @@ msgstr ""
 "\n"
 "您也可以给出端口范围(如: 24300:24350/udp)"
 
-#: network/drakfirewall.pm:198
+#: network/drakfirewall.pm:200
 #, c-format
 msgid "Everything (no firewall)"
 msgstr "全部(无防火墙)"
 
-#: network/drakfirewall.pm:200
+#: network/drakfirewall.pm:202
 #, c-format
 msgid "Other ports"
 msgstr "其它端口"
@@ -9872,9 +9907,9 @@ msgid "A password cracking attack has been attempted by %s."
 msgstr "%s 正在尝试密码破解攻击。"
 
 #: network/ifw.pm:144
-#, fuzzy, c-format
+#, c-format
 msgid "A \"%s\" attack has been attempted by %s"
-msgstr "%s 试图进行端口扫描攻击。"
+msgstr "%s 试图进行“%s”攻击"
 
 #: network/isdn.pm:117 network/netconnect.pm:455 network/netconnect.pm:544
 #: network/netconnect.pm:547 network/netconnect.pm:690
@@ -9955,7 +9990,7 @@ msgstr "手动选择"
 msgid "Internal ISDN card"
 msgstr "内置 ISDN 卡"
 
-#: network/netconnect.pm:80 printer/printerdrake.pm:1641 standalone/drakups:75
+#: network/netconnect.pm:80 printer/printerdrake.pm:1642 standalone/drakups:75
 #, c-format
 msgid "Manual configuration"
 msgstr "手工配置"
@@ -10416,7 +10451,7 @@ msgstr "IP 参数"
 #: network/netconnect.pm:589 network/netconnect.pm:894
 #: printer/printerdrake.pm:460 standalone/drakconnect:109
 #: standalone/drakconnect:316 standalone/drakconnect:882
-#: standalone/drakhosts:198 standalone/drakups:286
+#: standalone/drakhosts:197 standalone/drakups:286
 #, c-format
 msgid "IP address"
 msgstr "IP 地址"
@@ -10619,7 +10654,7 @@ msgstr "从 DHCP 获取 YP 服务器"
 msgid "Get NTPD servers from DHCP"
 msgstr "从 DHCP 获取 NTPD 服务器"
 
-#: network/netconnect.pm:918 printer/printerdrake.pm:1895
+#: network/netconnect.pm:918 printer/printerdrake.pm:1896
 #: standalone/drakconnect:676
 #, c-format
 msgid "IP address should be in format 1.2.3.4"
@@ -10911,7 +10946,7 @@ msgstr "最后, 您还应该至少输入您 DNS 服务器的 IP 地址。"
 msgid "Host name (optional)"
 msgstr "主机名(可选)"
 
-#: network/netconnect.pm:1178 standalone/drakhosts:198
+#: network/netconnect.pm:1178 standalone/drakhosts:197
 #, c-format
 msgid "Host name"
 msgstr "主机名"
@@ -11160,7 +11195,7 @@ msgstr ""
 "发生了意外错误: \n"
 "%s"
 
-#: network/network.pm:397
+#: network/network.pm:396 network/network.pm:397
 #, c-format
 msgid "Proxies configuration"
 msgstr "代理服务器配置"
@@ -11393,7 +11428,7 @@ msgstr "一般"
 msgid "maybe"
 msgstr "或许有用"
 
-#: pkgs.pm:460
+#: pkgs.pm:461
 #, c-format
 msgid "Downloading file %s..."
 msgstr "正在下载文件 %s..."
@@ -11418,9 +11453,9 @@ msgstr "已在其它计算机上配置"
 msgid "On CUPS server \"%s\""
 msgstr "在 CUPS 服务器“%s”"
 
-#: printer/cups.pm:117 printer/printerdrake.pm:5048
-#: printer/printerdrake.pm:5058 printer/printerdrake.pm:5203
-#: printer/printerdrake.pm:5214 printer/printerdrake.pm:5427
+#: printer/cups.pm:117 printer/printerdrake.pm:5049
+#: printer/printerdrake.pm:5059 printer/printerdrake.pm:5204
+#: printer/printerdrake.pm:5215 printer/printerdrake.pm:5428
 #, c-format
 msgid " (Default)"
 msgstr "(默认)"
@@ -11492,7 +11527,7 @@ msgid "Printer on remote CUPS server"
 msgstr "远程 CUPS 服务器的打印机"
 
 #: printer/main.pm:30 printer/printerdrake.pm:1373
-#: printer/printerdrake.pm:1918
+#: printer/printerdrake.pm:1919
 #, c-format
 msgid "Printer on remote lpd server"
 msgstr "远程 lpd 服务器的打印机"
@@ -11503,16 +11538,16 @@ msgid "Network printer (TCP/Socket)"
 msgstr "网络打印机(TCP/Socket)"
 
 #: printer/main.pm:32
-#, fuzzy, c-format
+#, c-format
 msgid "Printer on SMB/Windows server"
-msgstr "SMB/Windows 95/98/NT 服务器上的打印机"
+msgstr "SMB/Windows 服务器上的打印机"
 
 #: printer/main.pm:33
 #, c-format
 msgid "Printer on NetWare server"
 msgstr "NetWare 服务器上的打印机"
 
-#: printer/main.pm:34 printer/printerdrake.pm:1922
+#: printer/main.pm:34 printer/printerdrake.pm:1923
 #, c-format
 msgid "Enter a printer device URI"
 msgstr "输入打印机设备 URI"
@@ -11527,10 +11562,10 @@ msgstr "作业管道定向到命令"
 msgid "recommended"
 msgstr "建议"
 
-#: printer/main.pm:330 printer/main.pm:686 printer/main.pm:1776
-#: printer/main.pm:2917 printer/main.pm:2926 printer/printerdrake.pm:973
-#: printer/printerdrake.pm:1133 printer/printerdrake.pm:2410
-#: printer/printerdrake.pm:5464
+#: printer/main.pm:330 printer/main.pm:686 printer/main.pm:1800
+#: printer/main.pm:2943 printer/main.pm:2952 printer/printerdrake.pm:973
+#: printer/printerdrake.pm:1133 printer/printerdrake.pm:2411
+#: printer/printerdrake.pm:5465
 #, c-format
 msgid "Unknown model"
 msgstr "未知型号"
@@ -11727,33 +11762,33 @@ msgid "URI: %s"
 msgstr "URI: %s"
 
 #: printer/main.pm:683 printer/printerdrake.pm:1060
-#: printer/printerdrake.pm:3220
+#: printer/printerdrake.pm:3221
 #, c-format
 msgid "Raw printer (No driver)"
 msgstr "直接打印输出(不使用驱动程序)"
 
-#: printer/main.pm:1274 printer/printerdrake.pm:211
+#: printer/main.pm:1298 printer/printerdrake.pm:211
 #: printer/printerdrake.pm:223
 #, c-format
 msgid "Local network(s)"
 msgstr "局域网"
 
-#: printer/main.pm:1276 printer/printerdrake.pm:227
+#: printer/main.pm:1300 printer/printerdrake.pm:227
 #, c-format
 msgid "Interface \"%s\""
 msgstr "网卡“%s”"
 
-#: printer/main.pm:1278
+#: printer/main.pm:1302
 #, c-format
 msgid "Network %s"
 msgstr "网络 %s"
 
-#: printer/main.pm:1280
+#: printer/main.pm:1304
 #, c-format
 msgid "Host %s"
 msgstr "主机 %s"
 
-#: printer/main.pm:1309
+#: printer/main.pm:1333
 #, c-format
 msgid "%s (Port %s)"
 msgstr "%s(端口 %s)"
@@ -11899,7 +11934,7 @@ msgstr ""
 "理上述几点。"
 
 #: printer/printerdrake.pm:138 printer/printerdrake.pm:506
-#: printer/printerdrake.pm:4681
+#: printer/printerdrake.pm:4682
 #, c-format
 msgid "Remote CUPS server and no local CUPS daemon"
 msgstr "远程 CUPS 服务器且无本地 CUPS 守护程序"
@@ -12038,7 +12073,7 @@ msgstr "缺少服务器 IP！"
 msgid "The entered IP is not correct.\n"
 msgstr "输入的 IP 不正确。\n"
 
-#: printer/printerdrake.pm:440 printer/printerdrake.pm:2152
+#: printer/printerdrake.pm:440 printer/printerdrake.pm:2153
 #, c-format
 msgid "The port number should be an integer!"
 msgstr "端口须为数字！"
@@ -12048,7 +12083,7 @@ msgstr "端口须为数字！"
 msgid "This server is already in the list, it cannot be added again.\n"
 msgstr "此服务器已经位于列表中, 无法再次添加。\n"
 
-#: printer/printerdrake.pm:462 printer/printerdrake.pm:2179
+#: printer/printerdrake.pm:462 printer/printerdrake.pm:2180
 #: standalone/drakups:251 standalone/harddrake2:52
 #, c-format
 msgid "Port"
@@ -12061,8 +12096,8 @@ msgstr "端口"
 msgid "On, Name or IP of remote server:"
 msgstr "开, 远程服务器的名称或 IP 地址:"
 
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:4690
-#: printer/printerdrake.pm:4756
+#: printer/printerdrake.pm:514 printer/printerdrake.pm:4691
+#: printer/printerdrake.pm:4757
 #, c-format
 msgid "CUPS server name or IP address missing."
 msgstr "缺少 CUPS 服务器名称或 IP 地址。"
@@ -12072,31 +12107,31 @@ msgstr "缺少 CUPS 服务器名称或 IP 地址。"
 #: printer/printerdrake.pm:901 printer/printerdrake.pm:927
 #: printer/printerdrake.pm:1036 printer/printerdrake.pm:1078
 #: printer/printerdrake.pm:1088 printer/printerdrake.pm:1123
-#: printer/printerdrake.pm:2239 printer/printerdrake.pm:2454
-#: printer/printerdrake.pm:2486 printer/printerdrake.pm:2547
-#: printer/printerdrake.pm:2599 printer/printerdrake.pm:2616
-#: printer/printerdrake.pm:2660 printer/printerdrake.pm:2700
-#: printer/printerdrake.pm:2750 printer/printerdrake.pm:2784
-#: printer/printerdrake.pm:2794 printer/printerdrake.pm:3062
-#: printer/printerdrake.pm:3067 printer/printerdrake.pm:3215
-#: printer/printerdrake.pm:3326 printer/printerdrake.pm:3939
-#: printer/printerdrake.pm:4006 printer/printerdrake.pm:4055
-#: printer/printerdrake.pm:4058 printer/printerdrake.pm:4190
-#: printer/printerdrake.pm:4291 printer/printerdrake.pm:4363
-#: printer/printerdrake.pm:4384 printer/printerdrake.pm:4394
-#: printer/printerdrake.pm:4485 printer/printerdrake.pm:4580
-#: printer/printerdrake.pm:4586 printer/printerdrake.pm:4610
-#: printer/printerdrake.pm:4717 printer/printerdrake.pm:4826
-#: printer/printerdrake.pm:4846 printer/printerdrake.pm:4855
-#: printer/printerdrake.pm:4870 printer/printerdrake.pm:5071
-#: printer/printerdrake.pm:5533 printer/printerdrake.pm:5616
+#: printer/printerdrake.pm:2240 printer/printerdrake.pm:2455
+#: printer/printerdrake.pm:2487 printer/printerdrake.pm:2548
+#: printer/printerdrake.pm:2600 printer/printerdrake.pm:2617
+#: printer/printerdrake.pm:2661 printer/printerdrake.pm:2701
+#: printer/printerdrake.pm:2751 printer/printerdrake.pm:2785
+#: printer/printerdrake.pm:2795 printer/printerdrake.pm:3063
+#: printer/printerdrake.pm:3068 printer/printerdrake.pm:3216
+#: printer/printerdrake.pm:3327 printer/printerdrake.pm:3940
+#: printer/printerdrake.pm:4007 printer/printerdrake.pm:4056
+#: printer/printerdrake.pm:4059 printer/printerdrake.pm:4191
+#: printer/printerdrake.pm:4292 printer/printerdrake.pm:4364
+#: printer/printerdrake.pm:4385 printer/printerdrake.pm:4395
+#: printer/printerdrake.pm:4486 printer/printerdrake.pm:4581
+#: printer/printerdrake.pm:4587 printer/printerdrake.pm:4611
+#: printer/printerdrake.pm:4718 printer/printerdrake.pm:4827
+#: printer/printerdrake.pm:4847 printer/printerdrake.pm:4856
+#: printer/printerdrake.pm:4871 printer/printerdrake.pm:5072
+#: printer/printerdrake.pm:5534 printer/printerdrake.pm:5617
 #: standalone/printerdrake:73 standalone/printerdrake:572
 #, c-format
 msgid "Printerdrake"
 msgstr "Drak 打印机"
 
-#: printer/printerdrake.pm:567 printer/printerdrake.pm:4292
-#: printer/printerdrake.pm:4827
+#: printer/printerdrake.pm:567 printer/printerdrake.pm:4293
+#: printer/printerdrake.pm:4828
 #, c-format
 msgid "Reading printer data..."
 msgstr "正在读取打印机数据..."
@@ -12118,9 +12153,9 @@ msgid ""
 msgstr ""
 
 #: printer/printerdrake.pm:622
-#, fuzzy, c-format
+#, c-format
 msgid "Printer auto administration"
-msgstr "打印机自动检测"
+msgstr "打印机自动管理"
 
 #: printer/printerdrake.pm:623
 #, c-format
@@ -12130,34 +12165,34 @@ msgid ""
 msgstr ""
 
 #: printer/printerdrake.pm:626
-#, fuzzy, c-format
+#, c-format
 msgid "Do automatic configuration of new printers"
-msgstr "使用自动重新配置(DHCP)"
+msgstr "自动配置新打印机"
 
 #: printer/printerdrake.pm:627 printer/printerdrake.pm:641
-#, fuzzy, c-format
+#, c-format
 msgid "when a USB printer is connected and turned on"
-msgstr "(请确认您的打印机已经连接好并且接通了电源)。\n"
+msgstr "连接 USB 打印机且接通电源时"
 
 #: printer/printerdrake.pm:630
-#, fuzzy, c-format
+#, c-format
 msgid "when Printerdrake is started"
-msgstr "此打印机已禁用"
+msgstr "启动 Printerdrake 时"
 
 #: printer/printerdrake.pm:634
 #, c-format
 msgid "Mode for automatic printer setup:"
-msgstr ""
+msgstr "自动设置打印机的模式："
 
 #: printer/printerdrake.pm:640
-#, fuzzy, c-format
+#, c-format
 msgid "Re-enable disabled printers"
-msgstr "可用打印机"
+msgstr "重新启用禁用的打印机"
 
 #: printer/printerdrake.pm:644
-#, fuzzy, c-format
+#, c-format
 msgid "when the printing system is started"
-msgstr "更改打印系统"
+msgstr "启动打印系统时"
 
 #: printer/printerdrake.pm:680
 #, fuzzy, c-format
@@ -12222,7 +12257,7 @@ msgstr ""
 "\n"
 "不需要在这里配置远程的 CUPS 服务器上的打印机；这些打印机会被自动探测到。"
 
-#: printer/printerdrake.pm:751 printer/printerdrake.pm:5073
+#: printer/printerdrake.pm:751 printer/printerdrake.pm:5074
 #, c-format
 msgid ""
 "\n"
@@ -12374,13 +12409,13 @@ msgid ""
 "NOTE: Depending on the printer model and the printing system up to %d MB of "
 "additional software will be installed."
 msgstr ""
-"注意:根据不同的打印机型号和打印系统, 需要安装附加的软件, 最多会需要 %d MB 空"
+"注意: 根据不同的打印机型号和打印系统, 需要安装附加的软件, 最多会需要 %d MB 空"
 "间。"
 
 #: printer/printerdrake.pm:884
 #, c-format
 msgid "Do not do automatic printer setup and do not do it again"
-msgstr ""
+msgstr "不自动设置打印机，以后也不再自动设置"
 
 #: printer/printerdrake.pm:928
 #, c-format
@@ -12393,14 +12428,14 @@ msgid "Do not do automatic printer setup again"
 msgstr ""
 
 #: printer/printerdrake.pm:996
-#, fuzzy, c-format
+#, c-format
 msgid "New printers found"
-msgstr "没有发现打印机！"
+msgstr "发现了新打印机"
 
 #: printer/printerdrake.pm:997
-#, fuzzy, c-format
+#, c-format
 msgid "New printer found"
-msgstr "没有发现打印机！"
+msgstr "发现了新打印机"
 
 #: printer/printerdrake.pm:999
 #, c-format
@@ -12445,12 +12480,12 @@ msgstr " 位于 "
 msgid ")"
 msgstr ")"
 
-#: printer/printerdrake.pm:1069 printer/printerdrake.pm:3227
+#: printer/printerdrake.pm:1069 printer/printerdrake.pm:3228
 #, c-format
 msgid "Printer model selection"
 msgstr "打印机型号选择"
 
-#: printer/printerdrake.pm:1070 printer/printerdrake.pm:3228
+#: printer/printerdrake.pm:1070 printer/printerdrake.pm:3229
 #, c-format
 msgid "Which printer model do you have?"
 msgstr "您的打印机的型号是什么?"
@@ -12467,14 +12502,14 @@ msgstr ""
 "\n"
 "“Drak 打印机”无法确定您的打印机 %s 是什么型号的。请从列表中选择正确的型号。"
 
-#: printer/printerdrake.pm:1074 printer/printerdrake.pm:3233
+#: printer/printerdrake.pm:1074 printer/printerdrake.pm:3234
 #, c-format
 msgid ""
 "If your printer is not listed, choose a compatible (see printer manual) or a "
 "similar one."
 msgstr "如果您的打印机不在列表中, 请选择兼容的(参考打印机手册)或类似的型号。"
 
-#: printer/printerdrake.pm:1089 printer/printerdrake.pm:4847
+#: printer/printerdrake.pm:1089 printer/printerdrake.pm:4848
 #, c-format
 msgid "Configuring printer \"%s\"..."
 msgstr "正在配置打印机“%s”..."
@@ -12494,9 +12529,9 @@ msgid ""
 msgstr ""
 
 #: printer/printerdrake.pm:1125
-#, fuzzy, c-format
+#, c-format
 msgid "Configure Auto Administration"
-msgstr "远程管理"
+msgstr "配置自动管理"
 
 #: printer/printerdrake.pm:1126
 #, c-format
@@ -12507,9 +12542,9 @@ msgid ""
 msgstr ""
 
 #: printer/printerdrake.pm:1274 printer/printerdrake.pm:1286
-#: printer/printerdrake.pm:1393 printer/printerdrake.pm:2420
-#: printer/printerdrake.pm:2435 printer/printerdrake.pm:2507
-#: printer/printerdrake.pm:5090 printer/printerdrake.pm:5263
+#: printer/printerdrake.pm:1393 printer/printerdrake.pm:2421
+#: printer/printerdrake.pm:2436 printer/printerdrake.pm:2508
+#: printer/printerdrake.pm:5091 printer/printerdrake.pm:5264
 #, c-format
 msgid "Add a new printer"
 msgstr "添加新打印机"
@@ -12694,14 +12729,14 @@ msgstr ""
 "如果以后要添加、删除打印机, 改变打印机名字, 或者需要修改默认打印参数(送纸器、"
 "输出质量等), 请在“%s 控制中心”的“硬件”部分选择“打印机”。"
 
-#: printer/printerdrake.pm:1430 printer/printerdrake.pm:1660
-#: printer/printerdrake.pm:1723 printer/printerdrake.pm:1815
-#: printer/printerdrake.pm:1953 printer/printerdrake.pm:2029
-#: printer/printerdrake.pm:2196 printer/printerdrake.pm:2289
-#: printer/printerdrake.pm:2298 printer/printerdrake.pm:2307
-#: printer/printerdrake.pm:2318 printer/printerdrake.pm:2460
-#: printer/printerdrake.pm:2559 printer/printerdrake.pm:2605
-#: printer/printerdrake.pm:2672 printer/printerdrake.pm:2707
+#: printer/printerdrake.pm:1430 printer/printerdrake.pm:1661
+#: printer/printerdrake.pm:1724 printer/printerdrake.pm:1816
+#: printer/printerdrake.pm:1954 printer/printerdrake.pm:2030
+#: printer/printerdrake.pm:2197 printer/printerdrake.pm:2290
+#: printer/printerdrake.pm:2299 printer/printerdrake.pm:2308
+#: printer/printerdrake.pm:2319 printer/printerdrake.pm:2461
+#: printer/printerdrake.pm:2560 printer/printerdrake.pm:2606
+#: printer/printerdrake.pm:2673 printer/printerdrake.pm:2708
 #, c-format
 msgid "Could not install the %s packages!"
 msgstr "无法安装 %s 软件包!"
@@ -12711,8 +12746,8 @@ msgstr "无法安装 %s 软件包!"
 msgid "Skipping Windows/SMB server auto-detection"
 msgstr "跳过 Windows/SMB 服务器自动检测"
 
-#: printer/printerdrake.pm:1438 printer/printerdrake.pm:1583
-#: printer/printerdrake.pm:1821 printer/printerdrake.pm:2083
+#: printer/printerdrake.pm:1438 printer/printerdrake.pm:1584
+#: printer/printerdrake.pm:1822 printer/printerdrake.pm:2084
 #, c-format
 msgid "Printer auto-detection"
 msgstr "打印机自动检测"
@@ -12775,59 +12810,59 @@ msgstr ""
 msgid "You must enter a device or file name!"
 msgstr "您需要输入打印机设备名或一文件名！"
 
-#: printer/printerdrake.pm:1584
+#: printer/printerdrake.pm:1585
 #, c-format
 msgid "No printer found!"
 msgstr "没有发现打印机！"
 
-#: printer/printerdrake.pm:1592
+#: printer/printerdrake.pm:1593
 #, c-format
 msgid "Local Printers"
 msgstr "本机打印机"
 
-#: printer/printerdrake.pm:1593
+#: printer/printerdrake.pm:1594
 #, c-format
 msgid "Available printers"
 msgstr "可用打印机"
 
-#: printer/printerdrake.pm:1597 printer/printerdrake.pm:1606
+#: printer/printerdrake.pm:1598 printer/printerdrake.pm:1607
 #, c-format
 msgid "The following printer was auto-detected. "
 msgstr "下列打印机被自动检测到了。"
 
-#: printer/printerdrake.pm:1599
+#: printer/printerdrake.pm:1600
 #, c-format
 msgid ""
 "If it is not the one you want to configure, enter a device name/file name in "
 "the input line"
 msgstr "如果您要使用的打印机不在其中, 请在输入栏输入一个设备名或文件名"
 
-#: printer/printerdrake.pm:1600
+#: printer/printerdrake.pm:1601
 #, c-format
 msgid ""
 "Alternatively, you can specify a device name/file name in the input line"
 msgstr "或者, 您可以在输入行指定一个设备名/文件名"
 
-#: printer/printerdrake.pm:1601 printer/printerdrake.pm:1610
+#: printer/printerdrake.pm:1602 printer/printerdrake.pm:1611
 #, c-format
 msgid "Here is a list of all auto-detected printers. "
 msgstr "下面所列为自动检测到的打印机"
 
-#: printer/printerdrake.pm:1603
+#: printer/printerdrake.pm:1604
 #, c-format
 msgid ""
 "Please choose the printer you want to set up or enter a device name/file "
 "name in the input line"
 msgstr "请选择要设置的打印机或输入一个设备名或文件名到输入栏"
 
-#: printer/printerdrake.pm:1604
+#: printer/printerdrake.pm:1605
 #, c-format
 msgid ""
 "Please choose the printer to which the print jobs should go or enter a "
 "device name/file name in the input line"
 msgstr "请选择打印机的任务, 或者输入一个设备名或文件名到输入栏"
 
-#: printer/printerdrake.pm:1608
+#: printer/printerdrake.pm:1609
 #, c-format
 msgid ""
 "The configuration of the printer will work fully automatically. If your "
@@ -12837,12 +12872,12 @@ msgstr ""
 "打印机的设置会完全自动工作。如果您的打印机没有被正确检测或者您想定制打印机设"
 "置, 选择“手工设置”。"
 
-#: printer/printerdrake.pm:1609
+#: printer/printerdrake.pm:1610
 #, c-format
 msgid "Currently, no alternative possibility is available"
 msgstr "现在, 没有两种供选择的选项"
 
-#: printer/printerdrake.pm:1612
+#: printer/printerdrake.pm:1613
 #, c-format
 msgid ""
 "Please choose the printer you want to set up. The configuration of the "
@@ -12853,24 +12888,24 @@ msgstr ""
 "请选择您希望设置的打印机。设置打印机将完全自动工作。如果您的打印机没有被正确"
 "检测或者您想定制打印机设置, 选择“手工设置”。"
 
-#: printer/printerdrake.pm:1613
+#: printer/printerdrake.pm:1614
 #, c-format
 msgid "Please choose the printer to which the print jobs should go."
 msgstr "请选择将执行任务的打印机。"
 
-#: printer/printerdrake.pm:1615
+#: printer/printerdrake.pm:1616
 #, c-format
 msgid ""
 "Please choose the port that your printer is connected to or enter a device "
 "name/file name in the input line"
 msgstr "请选择您打印机使用的端口或输入栏内填入一合法设备或文件"
 
-#: printer/printerdrake.pm:1616
+#: printer/printerdrake.pm:1617
 #, c-format
 msgid "Please choose the port that your printer is connected to."
 msgstr "请选择您的打印机是连接到哪个端口。"
 
-#: printer/printerdrake.pm:1618
+#: printer/printerdrake.pm:1619
 #, c-format
 msgid ""
 " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
@@ -12879,26 +12914,26 @@ msgstr ""
 "(并行口: /dev/lp0, /dev/lp1, ..., 相当于 LPT1:, LPT2:, ..., 第一个 USB 设备"
 "口: /dev/usb/lp0, 第二个 USB 设备口: /dev/usb/lp1, ...)。"
 
-#: printer/printerdrake.pm:1622
+#: printer/printerdrake.pm:1623
 #, c-format
 msgid "You must choose/enter a printer/device!"
 msgstr "您必须选择/输入一台打印机/设备！"
 
-#: printer/printerdrake.pm:1662 printer/printerdrake.pm:1725
-#: printer/printerdrake.pm:1817 printer/printerdrake.pm:1955
-#: printer/printerdrake.pm:2031 printer/printerdrake.pm:2198
-#: printer/printerdrake.pm:2291 printer/printerdrake.pm:2300
-#: printer/printerdrake.pm:2309 printer/printerdrake.pm:2320
+#: printer/printerdrake.pm:1663 printer/printerdrake.pm:1726
+#: printer/printerdrake.pm:1818 printer/printerdrake.pm:1956
+#: printer/printerdrake.pm:2032 printer/printerdrake.pm:2199
+#: printer/printerdrake.pm:2292 printer/printerdrake.pm:2301
+#: printer/printerdrake.pm:2310 printer/printerdrake.pm:2321
 #, c-format
 msgid "Aborting"
 msgstr "中止"
 
-#: printer/printerdrake.pm:1698
+#: printer/printerdrake.pm:1699
 #, c-format
 msgid "Remote lpd Printer Options"
 msgstr "远程 lpd 打印机选项"
 
-#: printer/printerdrake.pm:1699
+#: printer/printerdrake.pm:1700
 #, c-format
 msgid ""
 "To use a remote lpd printer, you need to supply the hostname of the printer "
@@ -12907,65 +12942,66 @@ msgstr ""
 "要使用一个远程的 lpd 打印队列, 您需要指定打印服务器的\n"
 "主机名和打印任务要送往的打印队列的名字。"
 
-#: printer/printerdrake.pm:1700
+#: printer/printerdrake.pm:1701
 #, c-format
 msgid "Remote host name"
 msgstr "远程主机名"
 
-#: printer/printerdrake.pm:1701
+#: printer/printerdrake.pm:1702
 #, c-format
 msgid "Remote printer name"
 msgstr "远程打印机名"
 
-#: printer/printerdrake.pm:1704
+#: printer/printerdrake.pm:1705
 #, c-format
 msgid "Remote host name missing!"
 msgstr "未找到远程主机！"
 
-#: printer/printerdrake.pm:1708
+#: printer/printerdrake.pm:1709
 #, c-format
 msgid "Remote printer name missing!"
 msgstr "没有找到远程打印机！"
 
-#: printer/printerdrake.pm:1738 printer/printerdrake.pm:2214
-#: printer/printerdrake.pm:2339 standalone/drakTermServ:447
+#: printer/printerdrake.pm:1739 printer/printerdrake.pm:2215
+#: printer/printerdrake.pm:2340 standalone/drakTermServ:447
 #: standalone/drakTermServ:769 standalone/drakTermServ:785
 #: standalone/drakTermServ:1590 standalone/drakTermServ:1599
 #: standalone/drakTermServ:1611 standalone/drakbackup:499
 #: standalone/drakbackup:605 standalone/drakbackup:640
 #: standalone/drakbackup:741 standalone/drakroam:390
-#: standalone/draksambashare:424 standalone/harddrake2:259
+#: standalone/draksambashare:623 standalone/draksambashare:790
+#: standalone/harddrake2:259
 #, c-format
 msgid "Information"
 msgstr "信息"
 
-#: printer/printerdrake.pm:1738 printer/printerdrake.pm:2214
-#: printer/printerdrake.pm:2339
+#: printer/printerdrake.pm:1739 printer/printerdrake.pm:2215
+#: printer/printerdrake.pm:2340
 #, c-format
 msgid "Detected model: %s %s"
 msgstr "检测到型号: %s %s"
 
-#: printer/printerdrake.pm:1821 printer/printerdrake.pm:2083
+#: printer/printerdrake.pm:1822 printer/printerdrake.pm:2084
 #, c-format
 msgid "Scanning network..."
 msgstr "正在扫描网络..."
 
-#: printer/printerdrake.pm:1833 printer/printerdrake.pm:1854
+#: printer/printerdrake.pm:1834 printer/printerdrake.pm:1855
 #, c-format
 msgid ", printer \"%s\" on server \"%s\""
 msgstr ", 打印机“%s”在服务器“%s”上"
 
-#: printer/printerdrake.pm:1836 printer/printerdrake.pm:1857
+#: printer/printerdrake.pm:1837 printer/printerdrake.pm:1858
 #, c-format
 msgid "Printer \"%s\" on server \"%s\""
 msgstr "服务器“%2$s”上的打印机“%1$s”"
 
-#: printer/printerdrake.pm:1878
+#: printer/printerdrake.pm:1879
 #, c-format
 msgid "SMB (Windows 9x/NT) Printer Options"
 msgstr "SMB(Windows 9x/NT)打印机选项"
 
-#: printer/printerdrake.pm:1879
+#: printer/printerdrake.pm:1880
 #, c-format
 msgid ""
 "To print to a SMB printer, you need to provide the SMB host name (Note! It "
@@ -12979,7 +13015,7 @@ msgstr ""
 "址, \n"
 "以及有权访问打印机的用户名, 工作组和密码, 当然还有打印机的共享名。"
 
-#: printer/printerdrake.pm:1880
+#: printer/printerdrake.pm:1881
 #, c-format
 msgid ""
 " If the desired printer was auto-detected, simply choose it from the list "
@@ -12988,47 +13024,47 @@ msgstr ""
 "如果自动检测发现了想要的打印机, 只要从列表中选择它, 然后添加用户名、密码, 以"
 "及可能需要的网络组名。"
 
-#: printer/printerdrake.pm:1882
+#: printer/printerdrake.pm:1883
 #, c-format
 msgid "SMB server host"
 msgstr "SMB 服务器主机"
 
-#: printer/printerdrake.pm:1883
+#: printer/printerdrake.pm:1884
 #, c-format
 msgid "SMB server IP"
 msgstr "SMB 服务器 IP"
 
-#: printer/printerdrake.pm:1884 standalone/draksambashare:543
+#: printer/printerdrake.pm:1885 standalone/draksambashare:61
 #, c-format
 msgid "Share name"
 msgstr "共享名"
 
-#: printer/printerdrake.pm:1887
+#: printer/printerdrake.pm:1888
 #, c-format
 msgid "Workgroup"
 msgstr "工作组"
 
-#: printer/printerdrake.pm:1889
+#: printer/printerdrake.pm:1890
 #, c-format
 msgid "Auto-detected"
 msgstr "自动检测到"
 
-#: printer/printerdrake.pm:1899
+#: printer/printerdrake.pm:1900
 #, c-format
 msgid "Either the server name or the server's IP must be given!"
 msgstr "输入服务器名或服务器的IP！"
 
-#: printer/printerdrake.pm:1903
+#: printer/printerdrake.pm:1904
 #, c-format
 msgid "Samba share name missing!"
 msgstr "缺少 Samba 共享名！"
 
-#: printer/printerdrake.pm:1909
+#: printer/printerdrake.pm:1910
 #, c-format
 msgid "SECURITY WARNING!"
 msgstr "安全警告！"
 
-#: printer/printerdrake.pm:1910
+#: printer/printerdrake.pm:1911
 #, c-format
 msgid ""
 "You are about to set up printing to a Windows account with password. Due to "
@@ -13065,7 +13101,7 @@ msgstr ""
 "向导按照“%s”连接方式配置打印机。\n"
 "\n"
 
-#: printer/printerdrake.pm:1920
+#: printer/printerdrake.pm:1921
 #, c-format
 msgid ""
 "Set up your Windows server to make the printer available under the IPP "
@@ -13077,7 +13113,7 @@ msgstr ""
 "向导按照“%s”连接方式配置打印机。\n"
 "\n"
 
-#: printer/printerdrake.pm:1923
+#: printer/printerdrake.pm:1924
 #, c-format
 msgid ""
 "Connect your printer to a Linux server and let your Windows machine(s) "
@@ -13089,12 +13125,12 @@ msgstr ""
 "\n"
 "您坚持要继续这样配置打印机吗?"
 
-#: printer/printerdrake.pm:2002
+#: printer/printerdrake.pm:2003
 #, c-format
 msgid "NetWare Printer Options"
 msgstr "NetWare 打印机选项"
 
-#: printer/printerdrake.pm:2003
+#: printer/printerdrake.pm:2004
 #, c-format
 msgid ""
 "To print on a NetWare printer, you need to provide the NetWare print server "
@@ -13106,42 +13142,42 @@ msgstr ""
 "与它的 TCP/IP 主机名不同！), 以及有权访问打印机的用户名和密码, 当然还有打\n"
 "印机的打印队列名。"
 
-#: printer/printerdrake.pm:2004
+#: printer/printerdrake.pm:2005
 #, c-format
 msgid "Printer Server"
 msgstr "打印机服务器"
 
-#: printer/printerdrake.pm:2005
+#: printer/printerdrake.pm:2006
 #, c-format
 msgid "Print Queue Name"
 msgstr "打印队列名"
 
-#: printer/printerdrake.pm:2010
+#: printer/printerdrake.pm:2011
 #, c-format
 msgid "NCP server name missing!"
 msgstr "NCP 服务器未找到"
 
-#: printer/printerdrake.pm:2014
+#: printer/printerdrake.pm:2015
 #, c-format
 msgid "NCP queue name missing!"
 msgstr "NCP 队列名未找到！"
 
-#: printer/printerdrake.pm:2095 printer/printerdrake.pm:2116
+#: printer/printerdrake.pm:2096 printer/printerdrake.pm:2117
 #, c-format
 msgid ", host \"%s\", port %s"
 msgstr ", 主机“%s”, 端口 %s"
 
-#: printer/printerdrake.pm:2098 printer/printerdrake.pm:2119
+#: printer/printerdrake.pm:2099 printer/printerdrake.pm:2120
 #, c-format
 msgid "Host \"%s\", port %s"
 msgstr "主机“%s”, 端口 %s"
 
-#: printer/printerdrake.pm:2141
+#: printer/printerdrake.pm:2142
 #, c-format
 msgid "TCP/Socket Printer Options"
 msgstr "TCP/Socket 打印机选项"
 
-#: printer/printerdrake.pm:2143
+#: printer/printerdrake.pm:2144
 #, c-format
 msgid ""
 "Choose one of the auto-detected printers from the list or enter the hostname "
@@ -13150,7 +13186,7 @@ msgstr ""
 "从自动检测到的打印机列表中选择一个, 或者在输入域中输入主机名或 IP, 以及可选的"
 "端口号(默认是 9100)。"
 
-#: printer/printerdrake.pm:2144
+#: printer/printerdrake.pm:2145
 #, c-format
 msgid ""
 "To print to a TCP or socket printer, you need to provide the host name or IP "
@@ -13162,27 +13198,27 @@ msgstr ""
 "(默认是 9100)。HP JetDirect 打印服务器通常用端口 9100, 其它服务器可能用其它的"
 "端口。请查阅您的硬件手册。"
 
-#: printer/printerdrake.pm:2148
+#: printer/printerdrake.pm:2149
 #, c-format
 msgid "Printer host name or IP missing!"
 msgstr "缺少打印机主机名或 IP 地址！"
 
-#: printer/printerdrake.pm:2177
+#: printer/printerdrake.pm:2178
 #, c-format
 msgid "Printer host name or IP"
 msgstr "打印机主机名或 IP 地址"
 
-#: printer/printerdrake.pm:2240
+#: printer/printerdrake.pm:2241
 #, c-format
 msgid "Refreshing Device URI list..."
 msgstr "正在刷新设备 URI 列表..."
 
-#: printer/printerdrake.pm:2243 printer/printerdrake.pm:2245
+#: printer/printerdrake.pm:2244 printer/printerdrake.pm:2246
 #, c-format
 msgid "Printer Device URI"
 msgstr "打印机设备 URI"
 
-#: printer/printerdrake.pm:2244
+#: printer/printerdrake.pm:2245
 #, c-format
 msgid ""
 "You can specify directly the URI to access the printer. The URI must fulfill "
@@ -13192,17 +13228,17 @@ msgstr ""
 "您可以直接使用 URI 访问打印机。URI 必须符合 CUPS 或 Foomatic 规定。但注意不是"
 "所有的打印队列(spooler)都支持 URI。"
 
-#: printer/printerdrake.pm:2270
+#: printer/printerdrake.pm:2271
 #, c-format
 msgid "A valid URI must be entered!"
 msgstr "必须输入有效的 URI！"
 
-#: printer/printerdrake.pm:2375
+#: printer/printerdrake.pm:2376
 #, c-format
 msgid "Pipe into command"
 msgstr "管道命令"
 
-#: printer/printerdrake.pm:2376
+#: printer/printerdrake.pm:2377
 #, c-format
 msgid ""
 "Here you can specify any arbitrary command line into which the job should be "
@@ -13210,17 +13246,17 @@ msgid ""
 msgstr ""
 "您可在此指定任意的命令行, 打印任务将通过该命令行构成的管道再送到打印机。"
 
-#: printer/printerdrake.pm:2377
+#: printer/printerdrake.pm:2378
 #, c-format
 msgid "Command line"
 msgstr "命令行"
 
-#: printer/printerdrake.pm:2381
+#: printer/printerdrake.pm:2382
 #, c-format
 msgid "A command line must be entered!"
 msgstr "必须输入命令行！"
 
-#: printer/printerdrake.pm:2421
+#: printer/printerdrake.pm:2422
 #, c-format
 msgid ""
 "On many HP printers there are special functions available, maintenance (ink "
@@ -13232,14 +13268,14 @@ msgstr ""
 "水容量检查)，喷头清理，打印头对齐等等)，在一体机上进行扫描，内置读卡器的打印"
 "机可以直接访问存储卡。"
 
-#: printer/printerdrake.pm:2423
+#: printer/printerdrake.pm:2424
 #, c-format
 msgid ""
 "To access these extra functions on your HP printer, it must be set up with "
 "the appropriate software: "
 msgstr "要访问您惠普打印机的这些额外功能，您必须安装相应的软件："
 
-#: printer/printerdrake.pm:2424
+#: printer/printerdrake.pm:2425
 #, c-format
 msgid ""
 "Either with the newer HPLIP which allows printer maintenance through the "
@@ -13249,7 +13285,7 @@ msgstr ""
 "第一个可选项是使用较新的 HPLIP，它允许通过使用简便的图形化应用程序对打印机进"
 "行维护，但该工具只支持较新的 PhotoSmart 型号。"
 
-#: printer/printerdrake.pm:2425
+#: printer/printerdrake.pm:2426
 #, c-format
 msgid ""
 "or with the older HPOJ which allows only scanner and memory card access, but "
@@ -13258,26 +13294,26 @@ msgstr ""
 "第二个可选项是使用较早版本的 HPOJ，它只只能允许使用扫描仪和存储卡访问，但它的"
 "适应情况比 HPLIP 更广。"
 
-#: printer/printerdrake.pm:2427
+#: printer/printerdrake.pm:2428
 #, c-format
 msgid "What is your choice (choose \"None\" for non-HP printers)? "
 msgstr "请进行选择(选择“无”表示您没有惠普打印机):"
 
-#: printer/printerdrake.pm:2428 printer/printerdrake.pm:2429
-#: printer/printerdrake.pm:2455 printer/printerdrake.pm:2461
-#: printer/printerdrake.pm:2487
+#: printer/printerdrake.pm:2429 printer/printerdrake.pm:2430
+#: printer/printerdrake.pm:2456 printer/printerdrake.pm:2462
+#: printer/printerdrake.pm:2488
 #, c-format
 msgid "HPLIP"
 msgstr "HPLIP"
 
-#: printer/printerdrake.pm:2428 printer/printerdrake.pm:2431
-#: printer/printerdrake.pm:2600 printer/printerdrake.pm:2606
-#: printer/printerdrake.pm:2617
+#: printer/printerdrake.pm:2429 printer/printerdrake.pm:2432
+#: printer/printerdrake.pm:2601 printer/printerdrake.pm:2607
+#: printer/printerdrake.pm:2618
 #, c-format
 msgid "HPOJ"
 msgstr "HPOJ"
 
-#: printer/printerdrake.pm:2436
+#: printer/printerdrake.pm:2437
 #, c-format
 msgid ""
 "Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
@@ -13288,98 +13324,98 @@ msgstr ""
 "1100/1200/1220/3000/3200/3300/4345, DeskJet 450, Sony IJP-V100), 惠普 "
 "PhotoSmart 或 HP LaserJet 2200?"
 
-#: printer/printerdrake.pm:2455 printer/printerdrake.pm:2600
+#: printer/printerdrake.pm:2456 printer/printerdrake.pm:2601
 #, c-format
 msgid "Installing %s package..."
 msgstr "正在安装 %s 包..."
 
-#: printer/printerdrake.pm:2462 printer/printerdrake.pm:2607
+#: printer/printerdrake.pm:2463 printer/printerdrake.pm:2608
 #, c-format
 msgid "Only printing will be possible on the %s."
 msgstr "打印将只能在 %s 上进行。"
 
-#: printer/printerdrake.pm:2477
+#: printer/printerdrake.pm:2478
 #, c-format
 msgid "Could not remove your old HPOJ configuration file %s for your %s! "
 msgstr "无法为您的 %2$s 删除旧的 HPOJ 配置文件 %1$s!"
 
-#: printer/printerdrake.pm:2479
+#: printer/printerdrake.pm:2480
 #, c-format
 msgid "Please remove the file manually and restart HPOJ."
 msgstr "请手动删除文件，并重新启动 HPOJ。"
 
-#: printer/printerdrake.pm:2487 printer/printerdrake.pm:2617
+#: printer/printerdrake.pm:2488 printer/printerdrake.pm:2618
 #, c-format
 msgid "Checking device and configuring %s..."
 msgstr "正在检查并配置 %s..."
 
-#: printer/printerdrake.pm:2508
+#: printer/printerdrake.pm:2509
 #, c-format
 msgid "Which printer do you want to set up with HPLIP?"
 msgstr "您想使用 HPLIP 设置哪个打印机?"
 
-#: printer/printerdrake.pm:2548 printer/printerdrake.pm:2661
+#: printer/printerdrake.pm:2549 printer/printerdrake.pm:2662
 #, c-format
 msgid "Installing SANE packages..."
 msgstr "正在安装 SANE 包..."
 
-#: printer/printerdrake.pm:2561 printer/printerdrake.pm:2674
+#: printer/printerdrake.pm:2562 printer/printerdrake.pm:2675
 #, c-format
 msgid "Scanning on the %s will not be possible."
 msgstr "不可能在 %s 上扫描。"
 
-#: printer/printerdrake.pm:2576
+#: printer/printerdrake.pm:2577
 #, c-format
 msgid "Using and Maintaining your %s"
 msgstr "使用并维护您的 %s"
 
-#: printer/printerdrake.pm:2701
+#: printer/printerdrake.pm:2702
 #, c-format
 msgid "Installing mtools packages..."
 msgstr "正在安装 mtools 包..."
 
-#: printer/printerdrake.pm:2709
+#: printer/printerdrake.pm:2710
 #, c-format
 msgid "Photo memory card access on the %s will not be possible."
 msgstr "%s 上的照片存储卡不可能访问。"
 
-#: printer/printerdrake.pm:2725
+#: printer/printerdrake.pm:2726
 #, c-format
 msgid "Scanning on your HP multi-function device"
 msgstr "正在扫描您的惠普一体机"
 
-#: printer/printerdrake.pm:2734
+#: printer/printerdrake.pm:2735
 #, c-format
 msgid "Photo memory card access on your HP multi-function device"
 msgstr "您的惠普一体机的照片存储卡访问"
 
-#: printer/printerdrake.pm:2751
+#: printer/printerdrake.pm:2752
 #, c-format
 msgid "Configuring device..."
 msgstr "正在配置设备..."
 
-#: printer/printerdrake.pm:2785
+#: printer/printerdrake.pm:2786
 #, c-format
 msgid "Making printer port available for CUPS..."
 msgstr "正在配置打印机端口适用于 CUPS..."
 
-#: printer/printerdrake.pm:2794 printer/printerdrake.pm:3063
-#: printer/printerdrake.pm:3216
+#: printer/printerdrake.pm:2795 printer/printerdrake.pm:3064
+#: printer/printerdrake.pm:3217
 #, c-format
 msgid "Reading printer database..."
 msgstr "正在读取打印机数据库..."
 
-#: printer/printerdrake.pm:3021
+#: printer/printerdrake.pm:3022
 #, c-format
 msgid "Enter Printer Name and Comments"
 msgstr "输入打印机名称和注释"
 
-#: printer/printerdrake.pm:3025 printer/printerdrake.pm:4348
+#: printer/printerdrake.pm:3026 printer/printerdrake.pm:4349
 #, c-format
 msgid "Name of printer should contain only letters, numbers and the underscore"
 msgstr "打印机名称可以包含字母、数字和下划线"
 
-#: printer/printerdrake.pm:3031 printer/printerdrake.pm:4353
+#: printer/printerdrake.pm:3032 printer/printerdrake.pm:4354
 #, c-format
 msgid ""
 "The printer \"%s\" already exists,\n"
@@ -13388,7 +13424,7 @@ msgstr ""
 "打印机“%s”已经存在, \n"
 "您真的想要覆盖其配置吗?"
 
-#: printer/printerdrake.pm:3038
+#: printer/printerdrake.pm:3039
 #, c-format
 msgid ""
 "The printer name \"%s\" has more than 12 characters which can make the "
@@ -13398,7 +13434,7 @@ msgstr ""
 "打印机名称“%s”多于十二个字符，这可能在 Windows 客户中使得打印机无法访问。您真"
 "的想要使用此名称吗？"
 
-#: printer/printerdrake.pm:3047
+#: printer/printerdrake.pm:3048
 #, c-format
 msgid ""
 "Every printer needs a name (for example \"printer\"). The Description and "
@@ -13407,35 +13443,35 @@ msgstr ""
 "每台打印机需要一个名字(如“printer”)。打印机描述和位置是可选项, 它们仅仅供用户"
 "识别之用。"
 
-#: printer/printerdrake.pm:3048
+#: printer/printerdrake.pm:3049
 #, c-format
 msgid "Name of printer"
 msgstr "打印机名称"
 
-#: printer/printerdrake.pm:3049 standalone/drakconnect:592
+#: printer/printerdrake.pm:3050 standalone/drakconnect:592
 #: standalone/harddrake2:39 standalone/printerdrake:222
 #: standalone/printerdrake:229
 #, c-format
 msgid "Description"
 msgstr "描述"
 
-#: printer/printerdrake.pm:3050 standalone/printerdrake:222
+#: printer/printerdrake.pm:3051 standalone/printerdrake:222
 #: standalone/printerdrake:229
 #, c-format
 msgid "Location"
 msgstr "位置"
 
-#: printer/printerdrake.pm:3068
+#: printer/printerdrake.pm:3069
 #, c-format
 msgid "Preparing printer database..."
 msgstr "正在准备打印机数据..."
 
-#: printer/printerdrake.pm:3194
+#: printer/printerdrake.pm:3195
 #, c-format
 msgid "Your printer model"
 msgstr "您的打印机型号"
 
-#: printer/printerdrake.pm:3195
+#: printer/printerdrake.pm:3196
 #, c-format
 msgid ""
 "Printerdrake has compared the model name resulting from the printer auto-"
@@ -13458,18 +13494,18 @@ msgstr ""
 "\n"
 "%s"
 
-#: printer/printerdrake.pm:3200 printer/printerdrake.pm:3203
+#: printer/printerdrake.pm:3201 printer/printerdrake.pm:3204
 #, c-format
 msgid "The model is correct"
 msgstr "型号正确"
 
-#: printer/printerdrake.pm:3201 printer/printerdrake.pm:3202
-#: printer/printerdrake.pm:3205
+#: printer/printerdrake.pm:3202 printer/printerdrake.pm:3203
+#: printer/printerdrake.pm:3206
 #, c-format
 msgid "Select model manually"
 msgstr "手工选择型号"
 
-#: printer/printerdrake.pm:3229
+#: printer/printerdrake.pm:3230
 #, c-format
 msgid ""
 "\n"
@@ -13483,12 +13519,12 @@ msgstr ""
 "请检查“Drak 打印机”用自动检测选择的型号是否与您的打印机一致。如果选中的是不正"
 "确的型号或“原始打印机”, 请从列表中选择正确的型号。"
 
-#: printer/printerdrake.pm:3248
+#: printer/printerdrake.pm:3249
 #, c-format
 msgid "Install a manufacturer-supplied PPD file"
 msgstr "安装制造商提供的 PPD 文件"
 
-#: printer/printerdrake.pm:3280
+#: printer/printerdrake.pm:3281
 #, c-format
 msgid ""
 "Every PostScript printer is delivered with a PPD file which describes the "
@@ -13497,19 +13533,19 @@ msgstr ""
 "每台 PostScript 打印机都随机赠送了一个 PPD 文件, 其中描述了打印机的选项和特"
 "性。"
 
-#: printer/printerdrake.pm:3281
+#: printer/printerdrake.pm:3282
 #, c-format
 msgid ""
 "This file is usually somewhere on the CD with the Windows and Mac drivers "
 "delivered with the printer."
 msgstr "此文件通常位于随机的赠送的 Windows 和 Mac 驱动程序光盘中。"
 
-#: printer/printerdrake.pm:3282
+#: printer/printerdrake.pm:3283
 #, c-format
 msgid "You can find the PPD files also on the manufacturer's web sites."
 msgstr "您还可以在制造商的网站找到 PPD 文件。"
 
-#: printer/printerdrake.pm:3283
+#: printer/printerdrake.pm:3284
 #, c-format
 msgid ""
 "If you have Windows installed on your machine, you can find the PPD file on "
@@ -13517,7 +13553,7 @@ msgid ""
 msgstr ""
 "如果您的计算机上安装了 Windows, 您也可以在您的 Windows 分区上找到 PPD 文件。"
 
-#: printer/printerdrake.pm:3284
+#: printer/printerdrake.pm:3285
 #, c-format
 msgid ""
 "Installing the printer's PPD file and using it when setting up the printer "
@@ -13527,58 +13563,58 @@ msgstr ""
 "在设置打印机时安装打印机的 PPD 文件并使用该文件, 可充分发挥打印机硬件所提供的"
 "全部功能"
 
-#: printer/printerdrake.pm:3285
+#: printer/printerdrake.pm:3286
 #, c-format
 msgid ""
 "Here you can choose the PPD file to be installed on your machine, it will "
 "then be used for the setup of your printer."
 msgstr "您可在此选择要安装到您计算机的 PPD 文件, 该文件将用于设置打印机。"
 
-#: printer/printerdrake.pm:3287
+#: printer/printerdrake.pm:3288
 #, c-format
 msgid "Install PPD file from"
 msgstr "安装 PPD 文件的来源"
 
-#: printer/printerdrake.pm:3290 printer/printerdrake.pm:3298
+#: printer/printerdrake.pm:3291 printer/printerdrake.pm:3299
 #: standalone/scannerdrake:183 standalone/scannerdrake:192
 #: standalone/scannerdrake:242 standalone/scannerdrake:250
 #, c-format
 msgid "Floppy Disk"
 msgstr "软盘"
 
-#: printer/printerdrake.pm:3291 printer/printerdrake.pm:3300
+#: printer/printerdrake.pm:3292 printer/printerdrake.pm:3301
 #: standalone/scannerdrake:184 standalone/scannerdrake:194
 #: standalone/scannerdrake:243 standalone/scannerdrake:252
 #, c-format
 msgid "Other place"
 msgstr "其它位置"
 
-#: printer/printerdrake.pm:3306
+#: printer/printerdrake.pm:3307
 #, c-format
 msgid "Select PPD file"
 msgstr "选择 PPD 文件"
 
-#: printer/printerdrake.pm:3310
+#: printer/printerdrake.pm:3311
 #, c-format
 msgid "The PPD file %s does not exist or is unreadable!"
 msgstr "PPD 文件 %s 不存在或者不可读！"
 
-#: printer/printerdrake.pm:3316
+#: printer/printerdrake.pm:3317
 #, c-format
 msgid "The PPD file %s does not conform with the PPD specifications!"
 msgstr "PPD 文件 %s 不遵从 PPD 规范！"
 
-#: printer/printerdrake.pm:3327
+#: printer/printerdrake.pm:3328
 #, c-format
 msgid "Installing PPD file..."
 msgstr "正在安装 PPD 文件..."
 
-#: printer/printerdrake.pm:3445
+#: printer/printerdrake.pm:3446
 #, c-format
 msgid "OKI winprinter configuration"
 msgstr "OKI winprinter 打印机配置"
 
-#: printer/printerdrake.pm:3446
+#: printer/printerdrake.pm:3447
 #, c-format
 msgid ""
 "You are configuring an OKI laser winprinter. These printers\n"
@@ -13593,12 +13629,12 @@ msgstr ""
 "连接到第一个并行口上。否则, 该打印机将不会工作。您的连接类型设置将会被驱动程"
 "序忽略。"
 
-#: printer/printerdrake.pm:3471 printer/printerdrake.pm:3501
+#: printer/printerdrake.pm:3472 printer/printerdrake.pm:3502
 #, c-format
 msgid "Lexmark inkjet configuration"
 msgstr "利盟喷墨打印机设定"
 
-#: printer/printerdrake.pm:3472
+#: printer/printerdrake.pm:3473
 #, c-format
 msgid ""
 "The inkjet printer drivers provided by Lexmark only support local printers, "
@@ -13609,7 +13645,7 @@ msgstr ""
 "利盟提供的喷墨打印机驱动程序仅仅支持本地打印机, 而非远程主机或打印服务箱上的"
 "打印机。请把打印机连接到您的本机端口, 或者在连接了打印机的电脑上进行配置。"
 
-#: printer/printerdrake.pm:3502
+#: printer/printerdrake.pm:3503
 #, c-format
 msgid ""
 "To be able to print with your Lexmark inkjet and this configuration, you "
@@ -13627,12 +13663,12 @@ msgstr ""
 "图形界面的安装程序。在许可协议之后直接按取消。用“lexmarkmaintain”命令打印喷头"
 "对齐测试页, 然后用这个程序调节喷头对齐。"
 
-#: printer/printerdrake.pm:3512
+#: printer/printerdrake.pm:3513
 #, c-format
 msgid "Lexmark X125 configuration"
 msgstr "利盟 X125 配置"
 
-#: printer/printerdrake.pm:3513
+#: printer/printerdrake.pm:3514
 #, c-format
 msgid ""
 "The driver for this printer only supports printers locally connected via "
@@ -13643,12 +13679,12 @@ msgstr ""
 "此打印的驱动程序只支持通过 USB 连接到本地的打印机, 而非远程主机或打印服务器上"
 "的打印机。请把打印机连接到您的 USB 端口, 或者在连接了打印机的电脑上进行配置。"
 
-#: printer/printerdrake.pm:3535
+#: printer/printerdrake.pm:3536
 #, c-format
 msgid "Samsung ML/QL-85G configuration"
 msgstr "Samsung ML/QL-85G 配置"
 
-#: printer/printerdrake.pm:3536 printer/printerdrake.pm:3563
+#: printer/printerdrake.pm:3537 printer/printerdrake.pm:3564
 #, c-format
 msgid ""
 "The driver for this printer only supports printers locally connected on the "
@@ -13660,17 +13696,17 @@ msgstr ""
 "务器上或者其它并口的的打印机。请把打印机连接到您的第一个并口, 或者在连接了打"
 "印机的电脑上进行配置。"
 
-#: printer/printerdrake.pm:3562
+#: printer/printerdrake.pm:3563
 #, c-format
 msgid "Canon LBP-460/660 configuration"
 msgstr "Canon LBP-460/660 配置"
 
-#: printer/printerdrake.pm:3589
-#, fuzzy, c-format
+#: printer/printerdrake.pm:3590
+#, c-format
 msgid "Canon LBP-810/1120 (CAPT) configuration"
-msgstr "Canon LBP-460/660 配置"
+msgstr "Canon LBP-810/1120 (CAPT) 配置"
 
-#: printer/printerdrake.pm:3590
+#: printer/printerdrake.pm:3591
 #, fuzzy, c-format
 msgid ""
 "The driver for this printer only supports printers locally connected via "
@@ -13681,12 +13717,12 @@ msgstr ""
 "此打印的驱动程序只支持通过 USB 连接到本地的打印机, 而非远程主机或打印服务器上"
 "的打印机。请把打印机连接到您的 USB 端口, 或者在连接了打印机的电脑上进行配置。"
 
-#: printer/printerdrake.pm:3597
+#: printer/printerdrake.pm:3598
 #, c-format
 msgid "Firmware-Upload for HP LaserJet 1000"
 msgstr "惠普 LaserJet 1000 的固件上载"
 
-#: printer/printerdrake.pm:3747
+#: printer/printerdrake.pm:3748
 #, c-format
 msgid ""
 "Printer default settings\n"
@@ -13701,27 +13737,27 @@ msgstr ""
 "您应该确定页面大小和墨水类型/打印模式(若可用)和激光打印机的硬件配置(内存, 双"
 "工单元, 托纸盘)设置正确。注意超高质量/分辨率打印可能会变得很慢。"
 
-#: printer/printerdrake.pm:3872
+#: printer/printerdrake.pm:3873
 #, c-format
 msgid "Printer default settings"
 msgstr "打印机默认设置"
 
-#: printer/printerdrake.pm:3879
+#: printer/printerdrake.pm:3880
 #, c-format
 msgid "Option %s must be an integer number!"
 msgstr "选项 %s 必须是整数！"
 
-#: printer/printerdrake.pm:3883
+#: printer/printerdrake.pm:3884
 #, c-format
 msgid "Option %s must be a number!"
 msgstr "选项 %s 必须是数字！"
 
-#: printer/printerdrake.pm:3887
+#: printer/printerdrake.pm:3888
 #, c-format
 msgid "Option %s out of range!"
 msgstr "选项 %s 超出范围！"
 
-#: printer/printerdrake.pm:3939
+#: printer/printerdrake.pm:3940
 #, c-format
 msgid ""
 "Do you want to set this printer (\"%s\")\n"
@@ -13730,12 +13766,12 @@ msgstr ""
 "您希望设置这个打印机(“%s”)\n"
 "作为默认打印机吗?"
 
-#: printer/printerdrake.pm:3955
+#: printer/printerdrake.pm:3956
 #, c-format
 msgid "Test pages"
 msgstr "测试页"
 
-#: printer/printerdrake.pm:3956
+#: printer/printerdrake.pm:3957
 #, c-format
 msgid ""
 "Please select the test pages you want to print.\n"
@@ -13747,52 +13783,47 @@ msgstr ""
 "注意:在某些打印机上打印照片可能要花相当长的时间。\n"
 "一般请选择标准测试页。"
 
-#: printer/printerdrake.pm:3960
+#: printer/printerdrake.pm:3961
 #, c-format
 msgid "No test pages"
 msgstr "没有测试页"
 
-#: printer/printerdrake.pm:3961
+#: printer/printerdrake.pm:3962
 #, c-format
 msgid "Print"
 msgstr "打印"
 
-#: printer/printerdrake.pm:3986
+#: printer/printerdrake.pm:3987
 #, c-format
 msgid "Standard test page"
 msgstr "标准测试页"
 
-#: printer/printerdrake.pm:3989
+#: printer/printerdrake.pm:3990
 #, c-format
 msgid "Alternative test page (Letter)"
 msgstr "可换测试页(信纸)"
 
-#: printer/printerdrake.pm:3992
+#: printer/printerdrake.pm:3993
 #, c-format
 msgid "Alternative test page (A4)"
 msgstr "替换测试页 (A4)"
 
-#: printer/printerdrake.pm:3994
+#: printer/printerdrake.pm:3995
 #, c-format
 msgid "Photo test page"
 msgstr "照片测试页"
 
-#: printer/printerdrake.pm:3999
-#, c-format
-msgid "Do not print any test page"
-msgstr "不打印任何测试页"
-
-#: printer/printerdrake.pm:4007 printer/printerdrake.pm:4191
+#: printer/printerdrake.pm:4008 printer/printerdrake.pm:4192
 #, c-format
 msgid "Printing test page(s)..."
 msgstr "正在打印测试页..."
 
-#: printer/printerdrake.pm:4027
+#: printer/printerdrake.pm:4028
 #, c-format
 msgid "Skipping photo test page."
 msgstr "跳过照片测试页。"
 
-#: printer/printerdrake.pm:4044
+#: printer/printerdrake.pm:4045
 #, c-format
 msgid ""
 "Test page(s) have been sent to the printer.\n"
@@ -13806,7 +13837,7 @@ msgstr ""
 "%s\n"
 "\n"
 
-#: printer/printerdrake.pm:4048
+#: printer/printerdrake.pm:4049
 #, c-format
 msgid ""
 "Test page(s) have been sent to the printer.\n"
@@ -13815,17 +13846,17 @@ msgstr ""
 "测试页已经发送到打印机。\n"
 "打印机开始工作之前可能要等一段时间。\n"
 
-#: printer/printerdrake.pm:4058
+#: printer/printerdrake.pm:4059
 #, c-format
 msgid "Did it work properly?"
 msgstr "工作正常?"
 
-#: printer/printerdrake.pm:4082 printer/printerdrake.pm:5465
+#: printer/printerdrake.pm:4083 printer/printerdrake.pm:5466
 #, c-format
 msgid "Raw printer"
 msgstr "原始打印机"
 
-#: printer/printerdrake.pm:4120
+#: printer/printerdrake.pm:4121
 #, c-format
 msgid ""
 "To print a file from the command line (terminal window) you can either use "
@@ -13836,7 +13867,7 @@ msgstr ""
 "要从命令行打印文件可使用命令“%s <文件>”或图形打印工具:“xpp <文件"
 ">”或“kprinter <文件>”。图形工具让您比较容易的选择打印机和修改打印选项。\n"
 
-#: printer/printerdrake.pm:4122
+#: printer/printerdrake.pm:4123
 #, c-format
 msgid ""
 "These commands you can also use in the \"Printing command\" field of the "
@@ -13846,8 +13877,8 @@ msgstr ""
 "该命令您可用在许多应用的打印对话框的“打印命令”中, 因为应用程序会提供要打印的"
 "文件, 所以那里不用写文件名。\n"
 
-#: printer/printerdrake.pm:4125 printer/printerdrake.pm:4142
-#: printer/printerdrake.pm:4152
+#: printer/printerdrake.pm:4126 printer/printerdrake.pm:4143
+#: printer/printerdrake.pm:4153
 #, c-format
 msgid ""
 "\n"
@@ -13859,7 +13890,7 @@ msgstr ""
 "“%s”命令也可用来修改特殊打印作业的选项。只需简单地往命令行中加入想要的设置, "
 "例如:“%s <file>”。"
 
-#: printer/printerdrake.pm:4128 printer/printerdrake.pm:4168
+#: printer/printerdrake.pm:4129 printer/printerdrake.pm:4169
 #, c-format
 msgid ""
 "To know about the options available for the current printer read either the "
@@ -13870,7 +13901,7 @@ msgstr ""
 "s\n"
 "\n"
 
-#: printer/printerdrake.pm:4132
+#: printer/printerdrake.pm:4133
 #, c-format
 msgid ""
 "Here is a list of the available printing options for the current printer:\n"
@@ -13879,15 +13910,15 @@ msgstr ""
 "以下是可用于当前打印机的一些打印选项: \n"
 "\n"
 
-#: printer/printerdrake.pm:4137 printer/printerdrake.pm:4147
+#: printer/printerdrake.pm:4138 printer/printerdrake.pm:4148
 #, c-format
 msgid ""
 "To print a file from the command line (terminal window) use the command \"%s "
 "<file>\".\n"
 msgstr "要从命令行(终端窗口)打印文件, 请使用命令“%s <文件>”。\n"
 
-#: printer/printerdrake.pm:4139 printer/printerdrake.pm:4149
-#: printer/printerdrake.pm:4159
+#: printer/printerdrake.pm:4140 printer/printerdrake.pm:4150
+#: printer/printerdrake.pm:4160
 #, c-format
 msgid ""
 "This command you can also use in the \"Printing command\" field of the "
@@ -13897,21 +13928,21 @@ msgstr ""
 "该命令您可用在许多应用的打印对话框的“打印命令”项。但是此处并不提供文件名, 因"
 "为要打印的文件由应用程序提供。\n"
 
-#: printer/printerdrake.pm:4144 printer/printerdrake.pm:4154
+#: printer/printerdrake.pm:4145 printer/printerdrake.pm:4155
 #, c-format
 msgid ""
 "To get a list of the options available for the current printer click on the "
 "\"Print option list\" button."
 msgstr "要获得当前打印机的可用选项列表, 请单击“打印选项列表”按钮。"
 
-#: printer/printerdrake.pm:4157
+#: printer/printerdrake.pm:4158
 #, c-format
 msgid ""
 "To print a file from the command line (terminal window) use the command \"%s "
 "<file>\" or \"%s <file>\".\n"
 msgstr "用命令“%s <文件>”或“%s <文件>”打印文件。\n"
 
-#: printer/printerdrake.pm:4161
+#: printer/printerdrake.pm:4162
 #, c-format
 msgid ""
 "You can also use the graphical interface \"xpdq\" for setting options and "
@@ -13925,7 +13956,7 @@ msgstr ""
 "如果您使用 KDE, 桌面上有“停止打印机！”图标, 当您点击它时, 打印作业将立即停"
 "止。例如, 它可以用在纸张堵塞时。\n"
 
-#: printer/printerdrake.pm:4165
+#: printer/printerdrake.pm:4166
 #, c-format
 msgid ""
 "\n"
@@ -13936,37 +13967,37 @@ msgstr ""
 "\n"
 "“%s”和“%s”命令允许修改打印作业的选项, 例如:“%s <file>”。\n"
 
-#: printer/printerdrake.pm:4175
+#: printer/printerdrake.pm:4176
 #, c-format
 msgid "Printing/Scanning/Photo Cards on \"%s\""
 msgstr "在“%s”打印机上的打印/扫描/照片卡"
 
-#: printer/printerdrake.pm:4176
+#: printer/printerdrake.pm:4177
 #, c-format
 msgid "Printing/Scanning on \"%s\""
 msgstr "在“%s”打印机上打印/扫描"
 
-#: printer/printerdrake.pm:4178
+#: printer/printerdrake.pm:4179
 #, c-format
 msgid "Printing/Photo Card Access on \"%s\""
 msgstr "“%s”打印机上的打印/照片卡访问"
 
-#: printer/printerdrake.pm:4180
+#: printer/printerdrake.pm:4181
 #, c-format
 msgid "Using/Maintaining the printer \"%s\""
 msgstr "使用/维护打印机“%s”"
 
-#: printer/printerdrake.pm:4181
+#: printer/printerdrake.pm:4182
 #, c-format
 msgid "Printing on the printer \"%s\""
 msgstr "正在“%s”打印机上打印"
 
-#: printer/printerdrake.pm:4187
+#: printer/printerdrake.pm:4188
 #, c-format
 msgid "Print option list"
 msgstr "打印机选项列表"
 
-#: printer/printerdrake.pm:4209
+#: printer/printerdrake.pm:4210
 #, c-format
 msgid ""
 "Your %s is set up with HP's HPLIP driver software. This way many special "
@@ -13977,7 +14008,7 @@ msgstr ""
 "了。\n"
 "\n"
 
-#: printer/printerdrake.pm:4212
+#: printer/printerdrake.pm:4213
 #, c-format
 msgid ""
 "The scanner in your printer can be used with the usual SANE software, for "
@@ -13986,7 +14017,7 @@ msgstr ""
 "您打印机的扫描功能可以使用传统的 SANE 软件访问，比如 Kooka 和 XSane(都可在多"
 "媒体/图像菜单中找到)。"
 
-#: printer/printerdrake.pm:4213
+#: printer/printerdrake.pm:4214
 #, c-format
 msgid ""
 "Run Scannerdrake (Hardware/Scanner in Mandriva Linux Control Center) to "
@@ -13997,14 +14028,14 @@ msgstr ""
 "描仪。\n"
 "\n"
 
-#: printer/printerdrake.pm:4217
+#: printer/printerdrake.pm:4218
 #, c-format
 msgid ""
 "The memory card readers in your printer can be accessed like a usual USB "
 "mass storage device. "
 msgstr "您打印机上的读卡器可像普通的 USB 存储设备一样进行访问。"
 
-#: printer/printerdrake.pm:4218
+#: printer/printerdrake.pm:4219
 #, c-format
 msgid ""
 "After inserting a card a hard disk icon to access the card should appear on "
@@ -14014,7 +14045,7 @@ msgstr ""
 "插入存储卡后，桌面上会出现一个硬盘图标以便让您访问该存储卡。\n"
 "\n"
 
-#: printer/printerdrake.pm:4220
+#: printer/printerdrake.pm:4221
 #, c-format
 msgid ""
 "The memory card readers in your printer can be accessed using HP's Printer "
@@ -14024,7 +14055,7 @@ msgstr ""
 "您打印机中的读卡器可使用 HP 打印机工具箱(位于系统/监视/惠普打印机工具箱菜单)"
 "访问，请单击“功能”标签中的“访问存储卡...”按钮。"
 
-#: printer/printerdrake.pm:4221
+#: printer/printerdrake.pm:4222
 #, c-format
 msgid ""
 "Note that this is very slow, reading the pictures from the camera or a USB "
@@ -14034,7 +14065,7 @@ msgstr ""
 "请注意，此功能非常慢，从数码相机或 USB 读卡器访问要快得多。\n"
 "\n"
 
-#: printer/printerdrake.pm:4224
+#: printer/printerdrake.pm:4225
 #, c-format
 msgid ""
 "HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a "
@@ -14045,27 +14076,27 @@ msgstr ""
 "监视和维护功能：\n"
 "\n"
 
-#: printer/printerdrake.pm:4225
+#: printer/printerdrake.pm:4226
 #, c-format
 msgid " - Ink level/status info\n"
 msgstr " - 墨水容量/状态信息\n"
 
-#: printer/printerdrake.pm:4226
+#: printer/printerdrake.pm:4227
 #, c-format
 msgid " - Ink nozzle cleaning\n"
 msgstr " - 喷头清洗\n"
 
-#: printer/printerdrake.pm:4227
+#: printer/printerdrake.pm:4228
 #, c-format
 msgid " - Print head alignment\n"
 msgstr " - 打印头对齐\n"
 
-#: printer/printerdrake.pm:4228
+#: printer/printerdrake.pm:4229
 #, c-format
 msgid " - Color calibration\n"
 msgstr " - 颜色校正\n"
 
-#: printer/printerdrake.pm:4243
+#: printer/printerdrake.pm:4244
 #, c-format
 msgid ""
 "Your multi-function device was configured automatically to be able to scan. "
@@ -14088,7 +14119,7 @@ msgstr ""
 "您无需对此设备使用“Drak 扫描仪”配置工具。除非您想要在网络上共享此扫描仪, 您才"
 "需要使用“Drak 扫描仪”。"
 
-#: printer/printerdrake.pm:4269
+#: printer/printerdrake.pm:4270
 #, c-format
 msgid ""
 "Your printer was configured automatically to give you access to the photo "
@@ -14107,13 +14138,13 @@ msgstr ""
 "盘符“p:”中发现卡上的文件系统, 如果您有多于一个支持照片卡的 HP 打印机可以查看"
 "后续的盘符。在“MtoolsFM”中, 您可以在文件列表的右上角切换盘符。"
 
-#: printer/printerdrake.pm:4312 printer/printerdrake.pm:4339
-#: printer/printerdrake.pm:4374
+#: printer/printerdrake.pm:4313 printer/printerdrake.pm:4340
+#: printer/printerdrake.pm:4375
 #, c-format
 msgid "Transfer printer configuration"
 msgstr "传送打印机配置"
 
-#: printer/printerdrake.pm:4313
+#: printer/printerdrake.pm:4314
 #, c-format
 msgid ""
 "You can copy the printer configuration which you have done for the spooler %"
@@ -14126,26 +14157,26 @@ msgstr ""
 "覆盖, 但是打印作业不会迁移。\n"
 "由于以下原因, 某些打印队列无法迁移:\n"
 
-#: printer/printerdrake.pm:4316
+#: printer/printerdrake.pm:4317
 #, c-format
 msgid ""
 "CUPS does not support printers on Novell servers or printers sending the "
 "data into a free-formed command.\n"
 msgstr "CUPS 不支持 Novell 服务器上的打印机及发送数据到无格式命令的打印机。\n"
 
-#: printer/printerdrake.pm:4318
+#: printer/printerdrake.pm:4319
 #, c-format
 msgid ""
 "PDQ only supports local printers, remote LPD printers, and Socket/TCP "
 "printers.\n"
 msgstr "PDQ 只支持本地打印机、远程LPD打印机和 Socket/TCP 打印机。\n"
 
-#: printer/printerdrake.pm:4320
+#: printer/printerdrake.pm:4321
 #, c-format
 msgid "LPD and LPRng do not support IPP printers.\n"
 msgstr "LPD 和 LPRng 不支持IPP打印机。\n"
 
-#: printer/printerdrake.pm:4322
+#: printer/printerdrake.pm:4323
 #, c-format
 msgid ""
 "In addition, queues not created with this program or \"foomatic-configure\" "
@@ -14153,7 +14184,7 @@ msgid ""
 msgstr ""
 "另外, 如果队列不是由这个程序或者“foomatic-configure”所创建, 就无法传送。"
 
-#: printer/printerdrake.pm:4323
+#: printer/printerdrake.pm:4324
 #, c-format
 msgid ""
 "\n"
@@ -14164,7 +14195,7 @@ msgstr ""
 "而且, 如果打印机需要使用厂商提供的 PPD 文件配置, 或打印机带有内置的 CUPS 驱动"
 "程序, 它将无法传送。"
 
-#: printer/printerdrake.pm:4324
+#: printer/printerdrake.pm:4325
 #, c-format
 msgid ""
 "\n"
@@ -14174,17 +14205,17 @@ msgstr ""
 "\n"
 "标记您要迁移的打印机并单击“传送”。"
 
-#: printer/printerdrake.pm:4327
+#: printer/printerdrake.pm:4328
 #, c-format
 msgid "Do not transfer printers"
 msgstr "不传送打印机"
 
-#: printer/printerdrake.pm:4328 printer/printerdrake.pm:4344
+#: printer/printerdrake.pm:4329 printer/printerdrake.pm:4345
 #, c-format
 msgid "Transfer"
 msgstr "传送"
 
-#: printer/printerdrake.pm:4340
+#: printer/printerdrake.pm:4341
 #, c-format
 msgid ""
 "A printer named \"%s\" already exists under %s. \n"
@@ -14195,17 +14226,17 @@ msgstr ""
 "单击“传送”覆盖配置。\n"
 "您也可以选择新的名称或跳过该打印机。"
 
-#: printer/printerdrake.pm:4361
+#: printer/printerdrake.pm:4362
 #, c-format
 msgid "New printer name"
 msgstr "新打印机名称"
 
-#: printer/printerdrake.pm:4364
+#: printer/printerdrake.pm:4365
 #, c-format
 msgid "Transferring %s..."
 msgstr "正在传送 %s ..."
 
-#: printer/printerdrake.pm:4375
+#: printer/printerdrake.pm:4376
 #, c-format
 msgid ""
 "You have transferred your former default printer (\"%s\"), Should it be also "
@@ -14213,28 +14244,28 @@ msgid ""
 msgstr ""
 "您已经传送以前系统中的默认打印机(“%s”), 是否设置为新打印系统的默认打印机 %s?"
 
-#: printer/printerdrake.pm:4385
+#: printer/printerdrake.pm:4386
 #, c-format
 msgid "Refreshing printer data..."
 msgstr "正在刷新打印机数据..."
 
-#: printer/printerdrake.pm:4395
+#: printer/printerdrake.pm:4396
 #, c-format
 msgid "Starting network..."
 msgstr "正在启动网络..."
 
-#: printer/printerdrake.pm:4439 printer/printerdrake.pm:4443
-#: printer/printerdrake.pm:4445
+#: printer/printerdrake.pm:4440 printer/printerdrake.pm:4444
+#: printer/printerdrake.pm:4446
 #, c-format
 msgid "Configure the network now"
 msgstr "立即配置网络"
 
-#: printer/printerdrake.pm:4440
+#: printer/printerdrake.pm:4441
 #, c-format
 msgid "Network functionality not configured"
 msgstr "尚未完成网络配置"
 
-#: printer/printerdrake.pm:4441
+#: printer/printerdrake.pm:4442
 #, c-format
 msgid ""
 "You are going to configure a remote printer. This needs working network "
@@ -14245,12 +14276,12 @@ msgstr ""
 "您在配置远程打印机。配置远程打印需要网络访问, 但您还没有配置网络。如果您仍\n"
 "旧不进行网络配置的话, 您将不能使用您现在正在配置的打印机。您希望怎样继续?"
 
-#: printer/printerdrake.pm:4444
+#: printer/printerdrake.pm:4445
 #, c-format
 msgid "Go on without configuring the network"
 msgstr "跳过网络配置继续"
 
-#: printer/printerdrake.pm:4475
+#: printer/printerdrake.pm:4476
 #, c-format
 msgid ""
 "The network configuration done during the installation cannot be started "
@@ -14263,7 +14294,7 @@ msgstr ""
 "控制中心的“网络和 Internet”/“连接”一节纠正配置, 然后再使用 %s 控制中心的“硬"
 "件”/“打印机”设置打印机"
 
-#: printer/printerdrake.pm:4476
+#: printer/printerdrake.pm:4477
 #, c-format
 msgid ""
 "The network access was not running and could not be started. Please check "
@@ -14272,27 +14303,27 @@ msgid ""
 msgstr ""
 "网络访问未运行, 也无法启动。请检查您的配置和您的硬件。然后再次配置远程打印。"
 
-#: printer/printerdrake.pm:4486
+#: printer/printerdrake.pm:4487
 #, c-format
 msgid "Restarting printing system..."
 msgstr "重新启动打印系统..."
 
-#: printer/printerdrake.pm:4517
+#: printer/printerdrake.pm:4518
 #, c-format
 msgid "high"
 msgstr "高"
 
-#: printer/printerdrake.pm:4517
+#: printer/printerdrake.pm:4518
 #, c-format
 msgid "paranoid"
 msgstr "严格"
 
-#: printer/printerdrake.pm:4519
+#: printer/printerdrake.pm:4520
 #, c-format
 msgid "Installing a printing system in the %s security level"
 msgstr "在 %s 安全级别上安装打印系统"
 
-#: printer/printerdrake.pm:4520
+#: printer/printerdrake.pm:4521
 #, c-format
 msgid ""
 "You are about to install the printing system %s on a system running in the %"
@@ -14313,12 +14344,12 @@ msgstr ""
 "\n"
 "您要配置打印吗?"
 
-#: printer/printerdrake.pm:4556
+#: printer/printerdrake.pm:4557
 #, c-format
 msgid "Starting the printing system at boot time"
 msgstr "开机时启动打印系统"
 
-#: printer/printerdrake.pm:4557
+#: printer/printerdrake.pm:4558
 #, c-format
 msgid ""
 "The printing system (%s) will not be started automatically when the machine "
@@ -14338,32 +14369,32 @@ msgstr ""
 "\n"
 "您希望让打印系统自动启动吗?"
 
-#: printer/printerdrake.pm:4580
+#: printer/printerdrake.pm:4581
 #, c-format
 msgid "Checking installed software..."
 msgstr "正在检查已经安装的软件..."
 
-#: printer/printerdrake.pm:4586
+#: printer/printerdrake.pm:4587
 #, c-format
 msgid "Removing %s..."
 msgstr "正在删除 %s..."
 
-#: printer/printerdrake.pm:4590
+#: printer/printerdrake.pm:4591
 #, c-format
 msgid "Could not remove the %s printing system!"
 msgstr "无法删除 %s 打印系统!"
 
-#: printer/printerdrake.pm:4610
+#: printer/printerdrake.pm:4611
 #, c-format
 msgid "Installing %s..."
 msgstr "正在安装 %s..."
 
-#: printer/printerdrake.pm:4614
+#: printer/printerdrake.pm:4615
 #, c-format
 msgid "Could not install the %s printing system!"
 msgstr "无法安装 %s 打印系统!"
 
-#: printer/printerdrake.pm:4682
+#: printer/printerdrake.pm:4683
 #, c-format
 msgid ""
 "In this mode there is no local printing system, all printing requests go "
@@ -14375,7 +14406,7 @@ msgstr ""
 "意, 您以后将无法定义本地打印队列, 而且如果指定的服务器宕机的话, 将无法通过本"
 "机打印。"
 
-#: printer/printerdrake.pm:4684
+#: printer/printerdrake.pm:4685
 #, c-format
 msgid ""
 "Enter the host name or IP of your CUPS server and click OK if you want to "
@@ -14384,32 +14415,32 @@ msgstr ""
 "如果您想要使用此模式, 请输入您 CUPS 服务器的主机名或 IP 地址, 然后单击“确"
 "定”。否则请单击“退出”。”"
 
-#: printer/printerdrake.pm:4698
+#: printer/printerdrake.pm:4699
 #, c-format
 msgid "Name or IP of remote server:"
 msgstr "远程服务器的名称或 IP 地址:"
 
-#: printer/printerdrake.pm:4718
+#: printer/printerdrake.pm:4719
 #, c-format
 msgid "Setting Default Printer..."
 msgstr "正在设置默认打印机..."
 
-#: printer/printerdrake.pm:4738
+#: printer/printerdrake.pm:4739
 #, c-format
 msgid "Local CUPS printing system or remote CUPS server?"
 msgstr "是本地 CUPS 打印系统还是远程 CUPS 服务器?"
 
-#: printer/printerdrake.pm:4739
+#: printer/printerdrake.pm:4740
 #, c-format
 msgid "The CUPS printing system can be used in two ways: "
 msgstr "CUPS 打印系统可以通过两种方式使用:"
 
-#: printer/printerdrake.pm:4741
+#: printer/printerdrake.pm:4742
 #, c-format
 msgid "1. The CUPS printing system can run locally. "
 msgstr "1. 在本地运行 CUPS 打印系统。"
 
-#: printer/printerdrake.pm:4742
+#: printer/printerdrake.pm:4743
 #, c-format
 msgid ""
 "Then locally connected printers can be used and remote printers on other "
@@ -14418,7 +14449,7 @@ msgstr ""
 "既可以使用本地连接的打印机, 也可以自动发现同一网络中安装在其它 CUPS 服务器上"
 "的远程打印机。"
 
-#: printer/printerdrake.pm:4743
+#: printer/printerdrake.pm:4744
 #, c-format
 msgid ""
 "Disadvantage of this approach is, that more resources on the local machine "
@@ -14430,12 +14461,12 @@ msgstr ""
 "后台运行 CUPS 守护程序, 这可能需要占用一些内存。此外还需要开放IPP 端口(号码 "
 "631)。"
 
-#: printer/printerdrake.pm:4745
+#: printer/printerdrake.pm:4746
 #, c-format
 msgid "2. All printing requests are immediately sent to a remote CUPS server. "
 msgstr "2. 全部打印请求立即发送给远程 CUPS 服务器。"
 
-#: printer/printerdrake.pm:4746
+#: printer/printerdrake.pm:4747
 #, c-format
 msgid ""
 "Here local resource occupation is reduced to a minimum. No CUPS daemon is "
@@ -14445,7 +14476,7 @@ msgstr ""
 "这样可将本地资源占用降低最低。既不启动 CUPS 守护程序, 也无需开放端口, 设置本"
 "地打印队列也无需软件架构支持, 这样内存和磁盘空间都基本上不会占用。"
 
-#: printer/printerdrake.pm:4747
+#: printer/printerdrake.pm:4748
 #, c-format
 msgid ""
 "Disadvantage is that it is not possible to define local printers then and if "
@@ -14454,48 +14485,48 @@ msgstr ""
 "缺点是, 以后无法定义本地打印机。而且如果指定的服务器宕机的话, 将无法通过本机"
 "打印。"
 
-#: printer/printerdrake.pm:4749
+#: printer/printerdrake.pm:4750
 #, c-format
 msgid "How should CUPS be set up on your machine?"
 msgstr "如何在您的计算机上设置 CUPS?"
 
-#: printer/printerdrake.pm:4753 printer/printerdrake.pm:4768
-#: printer/printerdrake.pm:4772 printer/printerdrake.pm:4778
+#: printer/printerdrake.pm:4754 printer/printerdrake.pm:4769
+#: printer/printerdrake.pm:4773 printer/printerdrake.pm:4779
 #, c-format
 msgid "Remote server, specify Name or IP here:"
 msgstr "远程服务器, 在此指定名称或 IP 地址:"
 
-#: printer/printerdrake.pm:4767
+#: printer/printerdrake.pm:4768
 #, c-format
 msgid "Local CUPS printing system"
 msgstr "本地 CUPS 打印系统"
 
-#: printer/printerdrake.pm:4806
+#: printer/printerdrake.pm:4807
 #, c-format
 msgid "Select Printer Spooler"
 msgstr "选择打印机系统"
 
-#: printer/printerdrake.pm:4807
+#: printer/printerdrake.pm:4808
 #, c-format
 msgid "Which printing system (spooler) do you want to use?"
 msgstr "您需要使用哪种打印系统?"
 
-#: printer/printerdrake.pm:4856
+#: printer/printerdrake.pm:4857
 #, c-format
 msgid "Failed to configure printer \"%s\"!"
 msgstr "配置打印机“%s”失败"
 
-#: printer/printerdrake.pm:4871
+#: printer/printerdrake.pm:4872
 #, c-format
 msgid "Installing Foomatic..."
 msgstr "正在安装 Foomatic..."
 
-#: printer/printerdrake.pm:4877
+#: printer/printerdrake.pm:4878
 #, c-format
 msgid "Could not install %s packages, %s cannot be started!"
 msgstr "无法安装 %s 软件包, %s 无法启动!"
 
-#: printer/printerdrake.pm:5072
+#: printer/printerdrake.pm:5073
 #, c-format
 msgid ""
 "The following printers are configured. Double-click on a printer to change "
@@ -14505,48 +14536,48 @@ msgstr ""
 "下列打印机已配置。双击打印机可更改其设置、将其设为默认打印机, 或者查看相关信"
 "息。"
 
-#: printer/printerdrake.pm:5102
+#: printer/printerdrake.pm:5103
 #, c-format
 msgid "Display all available remote CUPS printers"
 msgstr "显示可用的全部远程 CUPS 打印机"
 
-#: printer/printerdrake.pm:5103
+#: printer/printerdrake.pm:5104
 #, c-format
 msgid "Refresh printer list (to display all available remote CUPS printers)"
 msgstr "更新打印列表(显示所有可用的远程 CUPS 打印机)"
 
-#: printer/printerdrake.pm:5114
+#: printer/printerdrake.pm:5115
 #, c-format
 msgid "CUPS configuration"
 msgstr "CUPS 配置"
 
-#: printer/printerdrake.pm:5126
+#: printer/printerdrake.pm:5127
 #, c-format
 msgid "Change the printing system"
 msgstr "更改打印系统"
 
-#: printer/printerdrake.pm:5135
+#: printer/printerdrake.pm:5136
 #, c-format
 msgid "Normal Mode"
 msgstr "普通模式"
 
-#: printer/printerdrake.pm:5136
+#: printer/printerdrake.pm:5137
 #, c-format
 msgid "Expert Mode"
 msgstr "专家模式"
 
-#: printer/printerdrake.pm:5408 printer/printerdrake.pm:5466
-#: printer/printerdrake.pm:5552 printer/printerdrake.pm:5561
+#: printer/printerdrake.pm:5409 printer/printerdrake.pm:5467
+#: printer/printerdrake.pm:5553 printer/printerdrake.pm:5562
 #, c-format
 msgid "Printer options"
 msgstr "打印机选项"
 
-#: printer/printerdrake.pm:5444
+#: printer/printerdrake.pm:5445
 #, c-format
 msgid "Modify printer configuration"
 msgstr "修改打印机配置"
 
-#: printer/printerdrake.pm:5446
+#: printer/printerdrake.pm:5447
 #, c-format
 msgid ""
 "Printer %s%s\n"
@@ -14555,104 +14586,104 @@ msgstr ""
 "打印机 %s%s\n"
 "真的要修改吗?"
 
-#: printer/printerdrake.pm:5451
+#: printer/printerdrake.pm:5452
 #, c-format
 msgid "This printer is disabled"
 msgstr "此打印机已禁用"
 
-#: printer/printerdrake.pm:5453
+#: printer/printerdrake.pm:5454
 #, c-format
 msgid "Do it!"
 msgstr "执行！"
 
-#: printer/printerdrake.pm:5458 printer/printerdrake.pm:5520
+#: printer/printerdrake.pm:5459 printer/printerdrake.pm:5521
 #, c-format
 msgid "Printer connection type"
 msgstr "打印机连接类型"
 
-#: printer/printerdrake.pm:5459 printer/printerdrake.pm:5526
+#: printer/printerdrake.pm:5460 printer/printerdrake.pm:5527
 #, c-format
 msgid "Printer name, description, location"
 msgstr "打印机名称、描述、位置"
 
-#: printer/printerdrake.pm:5461 printer/printerdrake.pm:5545
+#: printer/printerdrake.pm:5462 printer/printerdrake.pm:5546
 #, c-format
 msgid "Printer manufacturer, model, driver"
 msgstr "打印机厂家, 型号, 驱动"
 
-#: printer/printerdrake.pm:5462 printer/printerdrake.pm:5546
+#: printer/printerdrake.pm:5463 printer/printerdrake.pm:5547
 #, c-format
 msgid "Printer manufacturer, model"
 msgstr "打印机厂家, 型号"
 
-#: printer/printerdrake.pm:5468 printer/printerdrake.pm:5556
+#: printer/printerdrake.pm:5469 printer/printerdrake.pm:5557
 #, c-format
 msgid "Set this printer as the default"
 msgstr "设置该打印机为默认"
 
-#: printer/printerdrake.pm:5473 printer/printerdrake.pm:5562
-#: printer/printerdrake.pm:5564 printer/printerdrake.pm:5573
+#: printer/printerdrake.pm:5474 printer/printerdrake.pm:5563
+#: printer/printerdrake.pm:5565 printer/printerdrake.pm:5574
 #, c-format
 msgid "Enable Printer"
 msgstr "启用打印机"
 
-#: printer/printerdrake.pm:5476 printer/printerdrake.pm:5567
-#: printer/printerdrake.pm:5568 printer/printerdrake.pm:5570
+#: printer/printerdrake.pm:5477 printer/printerdrake.pm:5568
+#: printer/printerdrake.pm:5569 printer/printerdrake.pm:5571
 #, c-format
 msgid "Disable Printer"
 msgstr "禁用打印机"
 
-#: printer/printerdrake.pm:5480 printer/printerdrake.pm:5574
-#, fuzzy, c-format
+#: printer/printerdrake.pm:5481 printer/printerdrake.pm:5575
+#, c-format
 msgid "Printer communication error handling"
-msgstr "打印机连接类型"
+msgstr "打印机通讯错误处理"
 
-#: printer/printerdrake.pm:5481 printer/printerdrake.pm:5578
+#: printer/printerdrake.pm:5482 printer/printerdrake.pm:5579
 #, c-format
 msgid "Print test pages"
 msgstr "打印测试页"
 
-#: printer/printerdrake.pm:5482 printer/printerdrake.pm:5580
+#: printer/printerdrake.pm:5483 printer/printerdrake.pm:5581
 #, c-format
 msgid "Learn how to use this printer"
 msgstr "了解怎样使用此打印机"
 
-#: printer/printerdrake.pm:5483 printer/printerdrake.pm:5582
+#: printer/printerdrake.pm:5484 printer/printerdrake.pm:5583
 #, c-format
 msgid "Remove printer"
 msgstr "删除打印机"
 
-#: printer/printerdrake.pm:5534
+#: printer/printerdrake.pm:5535
 #, c-format
 msgid "Removing old printer \"%s\"..."
 msgstr "删除旧打印机“%s”..."
 
-#: printer/printerdrake.pm:5565
+#: printer/printerdrake.pm:5566
 #, c-format
 msgid "Printer \"%s\" is now enabled."
 msgstr "打印机“%s”现已启用。"
 
-#: printer/printerdrake.pm:5571
+#: printer/printerdrake.pm:5572
 #, c-format
 msgid "Printer \"%s\" is now disabled."
 msgstr "打印机“%s”现已禁用。"
 
-#: printer/printerdrake.pm:5613
+#: printer/printerdrake.pm:5614
 #, c-format
 msgid "Do you really want to remove the printer \"%s\"?"
 msgstr "真的要删除打印机“%s”?"
 
-#: printer/printerdrake.pm:5617
+#: printer/printerdrake.pm:5618
 #, c-format
 msgid "Removing printer \"%s\"..."
 msgstr "正在删除打印机“%s”..."
 
-#: printer/printerdrake.pm:5641
+#: printer/printerdrake.pm:5642
 #, c-format
 msgid "Default printer"
 msgstr "默认打印机"
 
-#: printer/printerdrake.pm:5642
+#: printer/printerdrake.pm:5643
 #, c-format
 msgid "The printer \"%s\" is set as the default printer now."
 msgstr "打印机“%s”设为缺省打印机。"
@@ -15419,28 +15450,28 @@ msgstr ""
 msgid "DrakSec Basic Options"
 msgstr "“Drak 安全管理”基本选项"
 
-#: security/level.pm:56
+#: security/level.pm:57
 #, c-format
 msgid "Please choose the desired security level"
 msgstr "请选择期望的安全级别"
 
-#: security/level.pm:60
+#: security/level.pm:61
 #, c-format
 msgid "Security level"
 msgstr "安全级别"
 
-#: security/level.pm:62
+#: security/level.pm:63
 #, c-format
 msgid "Use libsafe for servers"
 msgstr "服务器使用 libsafe"
 
-#: security/level.pm:63
+#: security/level.pm:64
 #, c-format
 msgid ""
 "A library which defends against buffer overflow and format string attacks."
 msgstr "防止缓冲溢出和串格式攻击的库。"
 
-#: security/level.pm:64
+#: security/level.pm:65
 #, c-format
 msgid "Security Administrator (login or email)"
 msgstr "安全管理员(登录或 email)"
@@ -15755,7 +15786,7 @@ msgstr "启动 X 字体服务器(Xorg 所需)。"
 msgid "Choose which services should be automatically started at boot time"
 msgstr "选择开机时自动启动的服务"
 
-#: services.pm:127
+#: services.pm:127 standalone/draksambashare:105
 #, c-format
 msgid "Printing"
 msgstr "打印"
@@ -15802,7 +15833,7 @@ msgid ""
 "about this service, sorry."
 msgstr "没有该服务的附加信息。"
 
-#: services.pm:224 ugtk2.pm:1026
+#: services.pm:224 ugtk2.pm:1028
 #, c-format
 msgid "Info"
 msgstr "信息"
@@ -17380,9 +17411,9 @@ msgid "Terminal Server Configuration"
 msgstr "终端服务器配置"
 
 #: standalone/drakTermServ:216
-#, fuzzy, c-format
+#, c-format
 msgid "dhcpd Config"
-msgstr "dhcpd 配置..."
+msgstr "dhcpd 配置"
 
 #: standalone/drakTermServ:220
 #, c-format
@@ -17911,9 +17942,9 @@ msgid "Delete All NBIs"
 msgstr "删除所有 NBI"
 
 #: standalone/drakTermServ:880
-#, fuzzy, c-format
+#, c-format
 msgid "Building images for kernel:"
-msgstr "为全部内核创建网络引导映像"
+msgstr "为内核创建映像:"
 
 #: standalone/drakTermServ:1004
 #, c-format
@@ -18208,10 +18239,11 @@ msgid "Configuration changed - restart clusternfs/dhcpd?"
 msgstr "配置已更改 - 重新启动 clusternfs/dhcpd 吗?"
 
 #: standalone/drakautoinst:38 standalone/drakhosts:123
-#: standalone/drakhosts:129 standalone/draknfs:86 standalone/draknfs:107
-#: standalone/draknfs:435 standalone/draknfs:437 standalone/draknfs:527
-#: standalone/draknfs:534 standalone/draksambashare:107
-#: standalone/draksambashare:128 standalone/draksambashare:426
+#: standalone/drakhosts:129 standalone/draknfs:84 standalone/draknfs:105
+#: standalone/draknfs:433 standalone/draknfs:435 standalone/draknfs:525
+#: standalone/draknfs:532 standalone/draksambashare:181
+#: standalone/draksambashare:202 standalone/draksambashare:625
+#: standalone/draksambashare:792
 #, c-format
 msgid "Error!"
 msgstr "错误！"
@@ -18764,7 +18796,7 @@ msgstr "不包括浏览器缓存"
 msgid "Select the files or directories and click on 'OK'"
 msgstr "选择文件或目录, 然后单击“确定”"
 
-#: standalone/drakbackup:1518 standalone/drakfont:655
+#: standalone/drakbackup:1518 standalone/drakfont:656
 #, c-format
 msgid "Remove Selected"
 msgstr "删除选中的"
@@ -20067,9 +20099,9 @@ msgid "Graphical boot theme selection"
 msgstr "图形化启动主题选择"
 
 #: standalone/drakboot:141
-#, fuzzy, c-format
+#, c-format
 msgid "Graphical boot mode:"
-msgstr "图形化启动主题选择"
+msgstr "图形化启动模式:"
 
 #: standalone/drakboot:143
 #, c-format
@@ -20190,7 +20222,7 @@ msgstr "Urpmi"
 msgid "Windows Migration tool"
 msgstr "Windows 迁移工具"
 
-#: standalone/drakbug:58
+#: standalone/drakbug:58 standalone/draksambashare:1230
 #, c-format
 msgid "Userdrake"
 msgstr "Drak 用户管理"
@@ -20841,7 +20873,7 @@ msgstr "字体列表"
 msgid "About"
 msgstr "关于"
 
-#: standalone/drakfont:492 standalone/drakfont:686 standalone/drakfont:724
+#: standalone/drakfont:492 standalone/drakfont:687 standalone/drakfont:725
 #, c-format
 msgid "Uninstall"
 msgstr "卸载"
@@ -20851,8 +20883,13 @@ msgstr "卸载"
 msgid "Import"
 msgstr "导入"
 
+#: standalone/drakfont:494
+#, c-format
+msgid "Get Windows Fonts"
+msgstr ""
+
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/drakfont:511
+#: standalone/drakfont:512
 #, c-format
 msgid ""
 "Copyright (C) 2001-2002 by Mandriva \n"
@@ -20873,7 +20910,7 @@ msgstr ""
 "\n"
 "       VIGNAUD Thierry <tvignaud@mandriva.com>"
 
-#: standalone/drakfont:520
+#: standalone/drakfont:521
 #, c-format
 msgid ""
 "This program is free software; you can redistribute it and/or modify\n"
@@ -20903,7 +20940,7 @@ msgstr ""
 "有, 请写信给自由软件基金会, 地址是 Free Software Foundation, Inc., 59 \n"
 "Temple Place - Suite 330, Boston, MA 02111-1307, USA."
 
-#: standalone/drakfont:536
+#: standalone/drakfont:537
 #, c-format
 msgid ""
 "Thanks:\n"
@@ -20934,12 +20971,12 @@ msgstr ""
 "\t  Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin 编写: \n"
 "             转换 ttf 字体文件为 afm 和 pfb 字体。\n"
 
-#: standalone/drakfont:555
+#: standalone/drakfont:556
 #, c-format
 msgid "Choose the applications that will support the fonts:"
 msgstr "请选择支持字体的应用程序: "
 
-#: standalone/drakfont:556
+#: standalone/drakfont:557
 #, c-format
 msgid ""
 "Before installing any fonts, be sure that you have the right to use and "
@@ -20952,107 +20989,107 @@ msgstr ""
 "\n"
 "通常字体安装可以正常进行。但有罕见的例外, 有问题的字体会使 X 挂住。"
 
-#: standalone/drakfont:566
+#: standalone/drakfont:567
 #, c-format
 msgid "Ghostscript"
 msgstr "Ghostscript"
 
-#: standalone/drakfont:567
+#: standalone/drakfont:568
 #, c-format
 msgid "StarOffice"
 msgstr "StarOffice"
 
-#: standalone/drakfont:568
+#: standalone/drakfont:569
 #, c-format
 msgid "Abiword"
 msgstr "Abiword"
 
-#: standalone/drakfont:569
+#: standalone/drakfont:570
 #, c-format
 msgid "Generic Printers"
 msgstr "通用打印机"
 
-#: standalone/drakfont:583
+#: standalone/drakfont:584
 #, c-format
 msgid "Select the font file or directory and click on 'Add'"
 msgstr "选择字体文件或目录, 然后单击“添加”"
 
-#: standalone/drakfont:584
+#: standalone/drakfont:585
 #, c-format
 msgid "File Selection"
 msgstr "选择文件"
 
-#: standalone/drakfont:588
+#: standalone/drakfont:589
 #, c-format
 msgid "Fonts"
 msgstr "字体"
 
-#: standalone/drakfont:651
+#: standalone/drakfont:652
 #, c-format
 msgid "Import fonts"
 msgstr "导入字体"
 
-#: standalone/drakfont:656
+#: standalone/drakfont:657
 #, c-format
 msgid "Install fonts"
 msgstr "安装字体"
 
-#: standalone/drakfont:691
+#: standalone/drakfont:692
 #, c-format
 msgid "click here if you are sure."
 msgstr "如果您确定, 请点击此处。"
 
-#: standalone/drakfont:693
+#: standalone/drakfont:694
 #, c-format
 msgid "here if no."
 msgstr "如果要放弃, 点击此处。"
 
-#: standalone/drakfont:732
+#: standalone/drakfont:733
 #, c-format
 msgid "Unselected All"
 msgstr "全部不选"
 
-#: standalone/drakfont:735
+#: standalone/drakfont:736
 #, c-format
 msgid "Selected All"
 msgstr "全部选中"
 
-#: standalone/drakfont:738
+#: standalone/drakfont:739
 #, c-format
 msgid "Remove List"
 msgstr "删除列表"
 
-#: standalone/drakfont:749 standalone/drakfont:768
+#: standalone/drakfont:750 standalone/drakfont:769
 #, c-format
 msgid "Importing fonts"
 msgstr "导入字体"
 
-#: standalone/drakfont:753 standalone/drakfont:773
+#: standalone/drakfont:754 standalone/drakfont:774
 #, c-format
 msgid "Initial tests"
 msgstr "初始测试"
 
-#: standalone/drakfont:754
+#: standalone/drakfont:755
 #, c-format
 msgid "Copy fonts on your system"
 msgstr "复制系统中的字体"
 
-#: standalone/drakfont:755
+#: standalone/drakfont:756
 #, c-format
 msgid "Install & convert Fonts"
 msgstr "安装并转换字体"
 
-#: standalone/drakfont:756
+#: standalone/drakfont:757
 #, c-format
 msgid "Post Install"
 msgstr "安装后的设置"
 
-#: standalone/drakfont:774
+#: standalone/drakfont:775
 #, c-format
 msgid "Remove fonts on your system"
 msgstr "删除系统中的字体"
 
-#: standalone/drakfont:775
+#: standalone/drakfont:776
 #, c-format
 msgid "Post Uninstall"
 msgstr "删除后"
@@ -21348,22 +21385,22 @@ msgstr ""
 #: standalone/drakhosts:98
 #, c-format
 msgid "Please add an host to be able to modify it."
-msgstr ""
+msgstr "请先添加主机，然后再修改。"
 
 #: standalone/drakhosts:108
-#, fuzzy, c-format
+#, c-format
 msgid "Please modify information"
-msgstr "请%s信息"
+msgstr "请修改信息"
 
 #: standalone/drakhosts:109
-#, fuzzy, c-format
+#, c-format
 msgid "Please delete information"
-msgstr "请%s信息"
+msgstr "请删除信息"
 
 #: standalone/drakhosts:110
-#, fuzzy, c-format
+#, c-format
 msgid "Please add information"
-msgstr "请%s信息"
+msgstr "请添加信息"
 
 #: standalone/drakhosts:115
 #, c-format
@@ -21390,53 +21427,53 @@ msgstr "请输入有效的 IP 地址。"
 msgid "Same IP is already in %s file."
 msgstr "%s 文件中已经有同样的 IP 了。"
 
-#: standalone/drakhosts:198
+#: standalone/drakhosts:197
 #, c-format
 msgid "Host Aliases"
 msgstr "主机别名"
 
-#: standalone/drakhosts:239
+#: standalone/drakhosts:237
 #, c-format
 msgid "DrakHOSTS manage hosts definitions"
 msgstr "DrakHOSTS 可管理主机定义"
 
-#: standalone/drakhosts:248
+#: standalone/drakhosts:246
 #, c-format
 msgid "Failed to add host."
 msgstr "添加主机失败。"
 
-#: standalone/drakhosts:255
+#: standalone/drakhosts:253
 #, c-format
 msgid "Failed to Modify host."
 msgstr "修改主机失败。"
 
-#: standalone/drakhosts:262
+#: standalone/drakhosts:260
 #, c-format
 msgid "Failed to remove host."
 msgstr "删除主机失败。"
 
 #: standalone/drakids:26
-#, fuzzy, c-format
+#, c-format
 msgid "Allowed addresses"
-msgstr "允许所有用户使用"
+msgstr "允许的地址"
 
 #: standalone/drakids:33 standalone/drakids:134 standalone/drakids:160
 #: standalone/drakids:169 standalone/drakids:179 standalone/drakids:246
 #: standalone/net_applet:61 standalone/net_applet:183
 #: standalone/net_applet:353 standalone/net_applet:390
-#, fuzzy, c-format
+#, c-format
 msgid "Interactive Firewall"
-msgstr "激活防火墙"
+msgstr "交互式防火墙"
 
 #: standalone/drakids:57
 #, c-format
 msgid "Log"
-msgstr ""
+msgstr "日志"
 
 #: standalone/drakids:61
-#, fuzzy, c-format
+#, c-format
 msgid "Clear logs"
-msgstr "全部清除"
+msgstr "清除日志"
 
 #: standalone/drakids:65 standalone/net_applet:439
 #, c-format
@@ -21495,52 +21532,52 @@ msgstr "服务"
 msgid "Network interface"
 msgstr "网卡"
 
-#: standalone/draknfs:43
+#: standalone/draknfs:41
 #, c-format
 msgid "map root user as anonymous"
 msgstr "将 root 用户映射为匿名者"
 
-#: standalone/draknfs:44
+#: standalone/draknfs:42
 #, c-format
 msgid "map all users to anonymous user"
 msgstr "将所有用户映射为匿名用户"
 
-#: standalone/draknfs:45
+#: standalone/draknfs:43
 #, c-format
 msgid "No user UID mapping"
 msgstr "无用户 UID 映射"
 
-#: standalone/draknfs:46
+#: standalone/draknfs:44
 #, c-format
 msgid "allow real remote root access"
 msgstr "允许真正的远程 root 访问"
 
-#: standalone/draknfs:85
+#: standalone/draknfs:83
 #, c-format
 msgid "NFS server"
 msgstr "NFS 服务器"
 
-#: standalone/draknfs:85
+#: standalone/draknfs:83
 #, c-format
 msgid "Restarting/Reloading NFS server..."
 msgstr "正在重新启动/重新装入 NFS 服务器..."
 
-#: standalone/draknfs:86
+#: standalone/draknfs:84
 #, c-format
 msgid "Error Restarting/Reloading NFS server"
 msgstr "重新启动/重新装入 NFS 服务器出错"
 
-#: standalone/draknfs:102 standalone/draksambashare:123
+#: standalone/draknfs:100 standalone/draksambashare:197
 #, c-format
 msgid "Directory Selection"
 msgstr "目录选择"
 
-#: standalone/draknfs:107 standalone/draksambashare:128
+#: standalone/draknfs:105 standalone/draksambashare:202
 #, c-format
 msgid "Should be a directory."
 msgstr "应该为目录。"
 
-#: standalone/draknfs:138
+#: standalone/draknfs:136
 #, c-format
 msgid ""
 "<span weight=\"bold\">NFS clients</span> may be specified in a number of "
@@ -21584,7 +21621,7 @@ msgstr ""
 "<span foreground=\"royalblue3\">IP 子网:</span> 您还可以同时将目录导出给 IP "
 "子网中的全部主机。例如，追加到网络基地址后的“/255.255.252.0”或“/22”。\n"
 
-#: standalone/draknfs:153
+#: standalone/draknfs:151
 #, fuzzy, c-format
 msgid ""
 "<span weight=\"bold\">User ID options</span>\n"
@@ -21628,27 +21665,27 @@ msgstr ""
 "<span foreground=\"royalblue3\">anonuid 和 anongid:</span> 显式设置匿名账户"
 "的 uid 和 gid。\n"
 
-#: standalone/draknfs:169
+#: standalone/draknfs:167
 #, c-format
 msgid "Synchronous access:"
 msgstr "同步访问:"
 
-#: standalone/draknfs:170
+#: standalone/draknfs:168
 #, c-format
 msgid "Secured Connection:"
 msgstr "安全连接:"
 
-#: standalone/draknfs:171
+#: standalone/draknfs:169
 #, c-format
 msgid "Read-Only share:"
 msgstr "只读共享:"
 
-#: standalone/draknfs:173
+#: standalone/draknfs:171
 #, c-format
 msgid "<span weight=\"bold\">Advanced Options</span>"
 msgstr "<span weight=\"bold\">高级选项</span>"
 
-#: standalone/draknfs:174
+#: standalone/draknfs:172
 #, c-format
 msgid ""
 "<span foreground=\"royalblue3\">%s:</span> this option requires that "
@@ -21658,7 +21695,7 @@ msgstr ""
 "<span foreground=\"royalblue3\">%s:</span> 此选项需要发出请求的互联网端口小"
 "于 IPPORT_RESERVED (1024)。此选项默认打开。"
 
-#: standalone/draknfs:175
+#: standalone/draknfs:173
 #, c-format
 msgid ""
 "<span foreground=\"royalblue3\">%s:</span> allow either only read or both "
@@ -21669,7 +21706,7 @@ msgstr ""
 "<span foreground=\"royalblue3\">%s:</span> 允许此 NFS 卷上的只读或读写请求。"
 "默认值为不允许任何会更改文件系统的请求。您也可以显式使用此选项。"
 
-#: standalone/draknfs:176
+#: standalone/draknfs:174
 #, c-format
 msgid ""
 "<span foreground=\"royalblue3\">%s:</span> disallows the NFS server to "
@@ -21679,117 +21716,119 @@ msgstr ""
 "<span foreground=\"royalblue3\">%s:</span> 禁止 NFS 暴露 NFS 协议，并在请求对"
 "存储设备发生实际更改之前先回复请求。"
 
-#: standalone/draknfs:306
+#: standalone/draknfs:304
 #, c-format
 msgid "Please add an NFS share to be able to modify it."
 msgstr ""
 
-#: standalone/draknfs:373
+#: standalone/draknfs:371
 #, c-format
 msgid "Advanced Options Help"
 msgstr "高级选项帮助"
 
-#: standalone/draknfs:384
+#: standalone/draknfs:382
 #, c-format
 msgid "NFS directory"
 msgstr "NFS 目录"
 
-#: standalone/draknfs:386 standalone/draksambashare:401
+#: standalone/draknfs:384 standalone/draksambashare:588
+#: standalone/draksambashare:767
 #, c-format
 msgid "Directory:"
 msgstr "目录:"
 
-#: standalone/draknfs:389
+#: standalone/draknfs:387
 #, c-format
 msgid "Host access"
 msgstr "主机访问"
 
-#: standalone/draknfs:391
+#: standalone/draknfs:389
 #, c-format
 msgid "Access:"
 msgstr "访问:"
 
-#: standalone/draknfs:391
+#: standalone/draknfs:389
 #, c-format
 msgid "Hosts Access"
 msgstr "主机访问"
 
-#: standalone/draknfs:394
+#: standalone/draknfs:392
 #, c-format
 msgid "User ID Mapping"
 msgstr "用户 ID 映射"
 
-#: standalone/draknfs:396
+#: standalone/draknfs:394
 #, c-format
 msgid "User ID:"
 msgstr "用户 ID:"
 
-#: standalone/draknfs:396
+#: standalone/draknfs:394
 #, c-format
 msgid "Help User ID"
 msgstr "帮助用户 ID"
 
-#: standalone/draknfs:397
+#: standalone/draknfs:395
 #, c-format
 msgid "Anonymous user ID:"
 msgstr "匿名用户 ID:"
 
-#: standalone/draknfs:398
+#: standalone/draknfs:396
 #, c-format
 msgid "Anonymous Group ID:"
 msgstr "匿名组 ID:"
 
-#: standalone/draknfs:435 standalone/draknfs:527 standalone/draksambashare:426
+#: standalone/draknfs:433 standalone/draknfs:525 standalone/draksambashare:625
+#: standalone/draksambashare:792
 #, c-format
 msgid "Please enter a directory to share."
 msgstr "请输入要共享的目录。"
 
-#: standalone/draknfs:437
+#: standalone/draknfs:435
 #, c-format
 msgid "You must specify hosts access."
 msgstr "您必须指定主机访问。"
 
-#: standalone/draknfs:515
+#: standalone/draknfs:513
 #, c-format
 msgid "Share Directory"
 msgstr "共享目录"
 
-#: standalone/draknfs:515
+#: standalone/draknfs:513
 #, c-format
 msgid "Hosts Wildcard"
 msgstr "主机通配符"
 
-#: standalone/draknfs:515
+#: standalone/draknfs:513
 #, c-format
 msgid "General Options"
 msgstr "常规选项"
 
-#: standalone/draknfs:515
+#: standalone/draknfs:513
 #, c-format
 msgid "Custom Options"
 msgstr "自定义选项"
 
-#: standalone/draknfs:534
+#: standalone/draknfs:532
 #, c-format
 msgid "Please use the modify button to set right access."
 msgstr "请使用修改按钮设定访问权限。"
 
-#: standalone/draknfs:589
+#: standalone/draknfs:584
 #, c-format
 msgid "DrakNFS manage NFS shares"
 msgstr "DrakNFS 可管理 NFS 共享"
 
-#: standalone/draknfs:598
+#: standalone/draknfs:593
 #, c-format
 msgid "Failed to add NFS share."
 msgstr "添加 NFS 共享失败。"
 
-#: standalone/draknfs:605
+#: standalone/draknfs:600
 #, c-format
 msgid "Failed to Modify NFS share."
 msgstr "修改 NFS 共享失败。"
 
-#: standalone/draknfs:612
+#: standalone/draknfs:607
 #, c-format
 msgid "Failed to remove an NFS share."
 msgstr "删除 NFS 共享失败。"
@@ -21814,7 +21853,7 @@ msgstr "自定义和系统设置"
 msgid "Editable"
 msgstr "可编辑"
 
-#: standalone/drakperm:48 standalone/drakperm:323
+#: standalone/drakperm:48 standalone/drakperm:323 standalone/draksambashare:95
 #, c-format
 msgid "Path"
 msgstr "路径"
@@ -22146,261 +22185,485 @@ msgstr "刷新"
 msgid "on"
 msgstr "开"
 
-#: standalone/draksambashare:64
+#: standalone/draksambashare:62
 #, fuzzy, c-format
-msgid "Read List"
-msgstr "删除列表"
+msgid "Share directory"
+msgstr "共享目录"
+
+#: standalone/draksambashare:63 standalone/draksambashare:96
+#, fuzzy, c-format
+msgid "Comment"
+msgstr "提交"
+
+#: standalone/draksambashare:64 standalone/draksambashare:97
+#, fuzzy, c-format
+msgid "Browseable"
+msgstr "浏览"
 
 #: standalone/draksambashare:65
+#, c-format
+msgid "Public"
+msgstr ""
+
+#: standalone/draksambashare:66 standalone/draksambashare:102
 #, fuzzy, c-format
-msgid "Write List"
+msgid "Writable"
+msgstr "写入"
+
+#: standalone/draksambashare:67 standalone/draksambashare:143
+#, fuzzy, c-format
+msgid "Create mask"
+msgstr "新建"
+
+#: standalone/draksambashare:68 standalone/draksambashare:144
+#, fuzzy, c-format
+msgid "Directory mask"
+msgstr "目录"
+
+#: standalone/draksambashare:69
+#, fuzzy, c-format
+msgid "Read list"
+msgstr "读取"
+
+#: standalone/draksambashare:70 standalone/draksambashare:103
+#: standalone/draksambashare:602
+#, fuzzy, c-format
+msgid "Write list"
 msgstr "白名单"
 
-#: standalone/draksambashare:66 standalone/draksambashare:543
+#: standalone/draksambashare:71 standalone/draksambashare:135
 #, fuzzy, c-format
 msgid "Admin users"
 msgstr "添加用户"
 
-#: standalone/draksambashare:67 standalone/draksambashare:543
+#: standalone/draksambashare:72 standalone/draksambashare:136
 #, fuzzy, c-format
 msgid "Valid users"
 msgstr "添加用户"
 
-#: standalone/draksambashare:68 standalone/draksambashare:543
+#: standalone/draksambashare:73
+#, fuzzy, c-format
+msgid "Inherit Permissions"
+msgstr "权限"
+
+#: standalone/draksambashare:74 standalone/draksambashare:137
 #, fuzzy, c-format
 msgid "Hide dot files"
 msgstr "隐藏文件"
 
-#: standalone/draksambashare:70
+#: standalone/draksambashare:76 standalone/draksambashare:142
 #, fuzzy, c-format
-msgid "Force Group"
-msgstr "组"
+msgid "Preserve case"
+msgstr "首选项: "
 
-#: standalone/draksambashare:71
-#, c-format
-msgid "Force create group"
-msgstr ""
+#: standalone/draksambashare:77
+#, fuzzy, c-format
+msgid "Force create mode"
+msgstr "您的打印机型号"
+
+#: standalone/draksambashare:78
+#, fuzzy, c-format
+msgid "Force group"
+msgstr "PFS 组"
 
-#: standalone/draksambashare:72 standalone/draksambashare:543
+#: standalone/draksambashare:79 standalone/draksambashare:141
 #, fuzzy, c-format
 msgid "Default case"
 msgstr "默认用户"
 
-#: standalone/draksambashare:73 standalone/draksambashare:543
-#, fuzzy, c-format
-msgid "Preserve case"
-msgstr "首选项: "
+#: standalone/draksambashare:94
+#, c-format
+msgid "Printer name"
+msgstr ""
 
-#: standalone/draksambashare:74 standalone/draksambashare:543
-#, fuzzy, c-format
-msgid "Create mask"
-msgstr "新建"
+#: standalone/draksambashare:98 standalone/draksambashare:594
+#, c-format
+msgid "Printable"
+msgstr ""
 
-#: standalone/draksambashare:75 standalone/draksambashare:543
-#, fuzzy, c-format
-msgid "Directory mask"
-msgstr "目录"
+#: standalone/draksambashare:99
+#, c-format
+msgid "Print Command"
+msgstr ""
+
+#: standalone/draksambashare:100
+#, c-format
+msgid "LPQ command"
+msgstr ""
 
-#: standalone/draksambashare:76
+#: standalone/draksambashare:101
+#, c-format
+msgid "Guest ok"
+msgstr ""
+
+#: standalone/draksambashare:104 standalone/draksambashare:145
+#: standalone/draksambashare:603
 #, fuzzy, c-format
 msgid "Inherit permissions"
 msgstr "权限"
 
 #: standalone/draksambashare:106
+#, c-format
+msgid "Create mode"
+msgstr ""
+
+#: standalone/draksambashare:107
+#, c-format
+msgid "Use client driver"
+msgstr ""
+
+#: standalone/draksambashare:133
+#, fuzzy, c-format
+msgid "Read List"
+msgstr "删除列表"
+
+#: standalone/draksambashare:134
+#, fuzzy, c-format
+msgid "Write List"
+msgstr "白名单"
+
+#: standalone/draksambashare:139
+#, fuzzy, c-format
+msgid "Force Group"
+msgstr "组"
+
+#: standalone/draksambashare:140
+#, c-format
+msgid "Force create group"
+msgstr ""
+
+#: standalone/draksambashare:160
+#, c-format
+msgid "About Draksambashare"
+msgstr ""
+
+#: standalone/draksambashare:160
+#, c-format
+msgid ""
+"Mandriva Linux \n"
+"Release: %s\n"
+"Author: Antoine Ginies\n"
+"\n"
+"This is a simple tool to easily manage Samba configuration."
+msgstr ""
+
+#: standalone/draksambashare:180
 #, fuzzy, c-format
 msgid "Samba server"
 msgstr "Samba 服务器"
 
-#: standalone/draksambashare:106
+#: standalone/draksambashare:180
 #, fuzzy, c-format
 msgid "Restarting/Reloading Samba server..."
 msgstr "正在重新启动/重新装入 NFS 服务器..."
 
-#: standalone/draksambashare:107
+#: standalone/draksambashare:181
 #, fuzzy, c-format
 msgid "Error Restarting/Reloading Samba server"
 msgstr "重新启动/重新装入 NFS 服务器出错"
 
-#: standalone/draksambashare:234 standalone/draksambashare:242
+#: standalone/draksambashare:367
 #, c-format
 msgid "Add a Samba share"
 msgstr ""
 
-#: standalone/draksambashare:237
+#: standalone/draksambashare:370
 #, c-format
 msgid "Goal of this wizard is to easily create a new Samba share."
 msgstr ""
 
-#: standalone/draksambashare:244
+#: standalone/draksambashare:372
 #, fuzzy, c-format
 msgid "Name of the share:"
 msgstr "证书名称"
 
-#: standalone/draksambashare:245 standalone/draksambashare:402
+#: standalone/draksambashare:373 standalone/draksambashare:587
+#: standalone/draksambashare:768
 #, fuzzy, c-format
 msgid "Comment:"
 msgstr "提交"
 
-#: standalone/draksambashare:246
+#: standalone/draksambashare:374
 #, fuzzy, c-format
 msgid "Path:"
 msgstr "路径"
 
-#: standalone/draksambashare:251
+#: standalone/draksambashare:379
 #, c-format
 msgid ""
 "Share with the same name already exist or share name empty, please choose "
 "another name."
 msgstr ""
 
-#: standalone/draksambashare:255 standalone/draksambashare:261
+#: standalone/draksambashare:383 standalone/draksambashare:389
 #, c-format
-msgid "Can\\'t create the directory, please enter a correct path."
+msgid "Can't create the directory, please enter a correct path."
 msgstr ""
 
-#: standalone/draksambashare:258 standalone/draksambashare:424
+#: standalone/draksambashare:386 standalone/draksambashare:623
+#: standalone/draksambashare:790
 #, fuzzy, c-format
 msgid "Please enter a Comment for this share."
 msgstr "请输入要共享的目录。"
 
-#: standalone/draksambashare:288 standalone/drakups:120 standalone/drakups:159
-#: standalone/logdrake:449 standalone/logdrake:455
-#, c-format
-msgid "Congratulations"
-msgstr "恭喜"
-
-#: standalone/draksambashare:289
+#: standalone/draksambashare:417
 #, c-format
 msgid ""
 "The wizard successfully added the Samba share. Now just double click on it "
 "in treeview to modify it"
 msgstr ""
 
-#: standalone/draksambashare:321
+#: standalone/draksambashare:433
+#, c-format
+msgid "pdf-gen - a pdf generator"
+msgstr ""
+
+#: standalone/draksambashare:434
+#, c-format
+msgid "printers - all printers available"
+msgstr ""
+
+#: standalone/draksambashare:438
+#, c-format
+msgid "Add Special Printer share"
+msgstr ""
+
+#: standalone/draksambashare:441
+#, c-format
+msgid ""
+"Goal of this wizard is to easily create a new special printer Samba share."
+msgstr ""
+
+#: standalone/draksambashare:449
+#, c-format
+msgid "A pdf gnerator already exist."
+msgstr ""
+
+#: standalone/draksambashare:473
+#, c-format
+msgid "Printers and print$ already exist."
+msgstr ""
+
+#: standalone/draksambashare:524
+#, c-format
+msgid "The wizard successfully the Samba share"
+msgstr ""
+
+#: standalone/draksambashare:547
+#, c-format
+msgid "Please add or select a Samba printer share to be able to modify it."
+msgstr ""
+
+#: standalone/draksambashare:583
+#, c-format
+msgid "Printer share"
+msgstr ""
+
+#: standalone/draksambashare:586
+#, c-format
+msgid "Printer name:"
+msgstr ""
+
+#: standalone/draksambashare:592 standalone/draksambashare:773
+#, fuzzy, c-format
+msgid "Writable:"
+msgstr "写入"
+
+#: standalone/draksambashare:593 standalone/draksambashare:774
+#, c-format
+msgid "Browseable:"
+msgstr ""
+
+#: standalone/draksambashare:598
+#, c-format
+msgid "Advanced options"
+msgstr ""
+
+#: standalone/draksambashare:600
+#, c-format
+msgid "Printer access"
+msgstr ""
+
+#: standalone/draksambashare:604
+#, c-format
+msgid "Guest ok:"
+msgstr ""
+
+#: standalone/draksambashare:605
+#, c-format
+msgid "Create mode:"
+msgstr ""
+
+#: standalone/draksambashare:609
+#, c-format
+msgid "Printer command"
+msgstr ""
+
+#: standalone/draksambashare:611
+#, c-format
+msgid "Print command:"
+msgstr ""
+
+#: standalone/draksambashare:612
+#, c-format
+msgid "LPQ command:"
+msgstr ""
+
+#: standalone/draksambashare:613
+#, c-format
+msgid "Printing:"
+msgstr ""
+
+#: standalone/draksambashare:629
+#, c-format
+msgid "create mode should be numeric. ie: 0755."
+msgstr ""
+
+#: standalone/draksambashare:691
 #, c-format
 msgid "DrakSamba entry"
 msgstr ""
 
-#: standalone/draksambashare:325
+#: standalone/draksambashare:696
 #, c-format
-msgid "Please add a Samba share to be able to modify it."
+msgid "Please add or select a Samba share to be able to modify it."
 msgstr ""
 
-#: standalone/draksambashare:352
+#: standalone/draksambashare:719
 #, fuzzy, c-format
 msgid "Samba user access"
 msgstr "Samba 服务器"
 
-#: standalone/draksambashare:360
+#: standalone/draksambashare:727
 #, fuzzy, c-format
 msgid "Mask options"
 msgstr "基本选项"
 
-#: standalone/draksambashare:374
+#: standalone/draksambashare:741
 #, fuzzy, c-format
 msgid "Display options"
 msgstr "指定选项"
 
-#: standalone/draksambashare:397
+#: standalone/draksambashare:763
 #, fuzzy, c-format
 msgid "Samba share directory"
 msgstr "共享目录"
 
-#: standalone/draksambashare:400
+#: standalone/draksambashare:766
 #, fuzzy, c-format
 msgid "Share name:"
 msgstr "共享名"
 
-#: standalone/draksambashare:406
+#: standalone/draksambashare:772
 #, c-format
 msgid "Public:"
 msgstr ""
 
-#: standalone/draksambashare:407
-#, fuzzy, c-format
-msgid "Writable:"
-msgstr "写入"
+#: standalone/draksambashare:796
+#, c-format
+msgid ""
+"Create mask, create mode and directory mask should be numeric. ie: 0755."
+msgstr ""
 
-#: standalone/draksambashare:408
+#: standalone/draksambashare:803
 #, c-format
-msgid "Browseable:"
+msgid "Please create this Samba user: %s"
 msgstr ""
 
-#: standalone/draksambashare:430
+#: standalone/draksambashare:926
 #, c-format
-msgid ""
-"Create mask, create mode and directory mask should be numeric. ie: 0755."
+msgid "User information"
 msgstr ""
 
-#: standalone/draksambashare:543
+#: standalone/draksambashare:928
+#, c-format
+msgid "User name:"
+msgstr ""
+
+#: standalone/draksambashare:929
+#, c-format
+msgid "Passwd:"
+msgstr ""
+
+#: standalone/draksambashare:1129
 #, fuzzy, c-format
-msgid "Share directory"
-msgstr "共享目录"
+msgid "Failed to add Samba share."
+msgstr "添加 NFS 共享失败。"
 
-#: standalone/draksambashare:543
+#: standalone/draksambashare:1138
 #, fuzzy, c-format
-msgid "Comment"
-msgstr "提交"
+msgid "Failed to Modify Samba share."
+msgstr "修改 NFS 共享失败。"
 
-#: standalone/draksambashare:543
+#: standalone/draksambashare:1147
 #, fuzzy, c-format
-msgid "Browseable"
-msgstr "浏览"
+msgid "Failed to remove a Samba share."
+msgstr "删除 NFS 共享失败。"
 
-#: standalone/draksambashare:543
+#: standalone/draksambashare:1154
 #, c-format
-msgid "Public"
+msgid "File share"
 msgstr ""
 
-#: standalone/draksambashare:543
-#, fuzzy, c-format
-msgid "Writable"
-msgstr "写入"
+#: standalone/draksambashare:1162
+#, c-format
+msgid "Add printers"
+msgstr ""
 
-#: standalone/draksambashare:543
-#, fuzzy, c-format
-msgid "Read list"
-msgstr "读取"
+#: standalone/draksambashare:1168
+#, c-format
+msgid "Failed to add printers."
+msgstr ""
 
-#: standalone/draksambashare:543
-#, fuzzy, c-format
-msgid "Write list"
-msgstr "白名单"
+#: standalone/draksambashare:1177
+#, c-format
+msgid "Failed to Modify."
+msgstr ""
 
-#: standalone/draksambashare:543
-#, fuzzy, c-format
-msgid "Force create mode"
-msgstr "您的打印机型号"
+#: standalone/draksambashare:1186
+#, c-format
+msgid "Failed to remove."
+msgstr ""
 
-#: standalone/draksambashare:543
-#, fuzzy, c-format
-msgid "Force group"
-msgstr "PFS 组"
+#: standalone/draksambashare:1193
+#, c-format
+msgid "Printers"
+msgstr ""
 
-#: standalone/draksambashare:543
-#, fuzzy, c-format
-msgid "Inherit Permissions"
-msgstr "权限"
+#: standalone/draksambashare:1201
+#, c-format
+msgid "Change password"
+msgstr ""
 
-#: standalone/draksambashare:590
-#, fuzzy, c-format
-msgid "DrakSamba manage Samba shares"
-msgstr "DrakNFS 可管理 NFS 共享"
+#: standalone/draksambashare:1206
+#, c-format
+msgid "Failed to change user password."
+msgstr ""
 
-#: standalone/draksambashare:601
-#, fuzzy, c-format
-msgid "Failed to add Samba share."
-msgstr "添加 NFS 共享失败。"
+#: standalone/draksambashare:1214
+#, c-format
+msgid "Failed to add user."
+msgstr ""
 
-#: standalone/draksambashare:609
-#, fuzzy, c-format
-msgid "Failed to Modify Samba share."
-msgstr "修改 NFS 共享失败。"
+#: standalone/draksambashare:1217
+#, c-format
+msgid "Delete user"
+msgstr ""
+
+#: standalone/draksambashare:1226
+#, c-format
+msgid "Failed to delete user."
+msgstr ""
+
+#: standalone/draksambashare:1238
+#, c-format
+msgid "Samba Users"
+msgstr ""
 
-#: standalone/draksambashare:616
+#: standalone/draksambashare:1247
 #, fuzzy, c-format
-msgid "Failed to remove a Samba share."
-msgstr "删除 NFS 共享失败。"
+msgid "DrakSamba manage Samba shares"
+msgstr "DrakNFS 可管理 NFS 共享"
 
 #: standalone/draksec:49
 #, c-format
@@ -26427,47 +26690,47 @@ msgstr "安装更新"
 msgid "Exit install"
 msgstr "退出安装"
 
-#: ugtk2.pm:916
+#: ugtk2.pm:918
 #, c-format
 msgid "Is this correct?"
 msgstr "这样正确吗?"
 
-#: ugtk2.pm:976
+#: ugtk2.pm:978
 #, c-format
 msgid "No file chosen"
 msgstr "未选择文件"
 
-#: ugtk2.pm:978
+#: ugtk2.pm:980
 #, c-format
 msgid "You have chosen a file, not a directory"
 msgstr "您选择了文件，而非目录"
 
-#: ugtk2.pm:980
+#: ugtk2.pm:982
 #, c-format
 msgid "You have chosen a directory, not a file"
 msgstr "您选择了目录，而非文件"
 
-#: ugtk2.pm:982
+#: ugtk2.pm:984
 #, c-format
 msgid "No such directory"
 msgstr "无此目录"
 
-#: ugtk2.pm:982
+#: ugtk2.pm:984
 #, c-format
 msgid "No such file"
 msgstr "非本地文件"
 
-#: ugtk2.pm:1063
+#: ugtk2.pm:1065
 #, c-format
 msgid "Expand Tree"
 msgstr "展开树"
 
-#: ugtk2.pm:1064
+#: ugtk2.pm:1066
 #, c-format
 msgid "Collapse Tree"
 msgstr "折叠树"
 
-#: ugtk2.pm:1065
+#: ugtk2.pm:1067
 #, c-format
 msgid "Toggle between flat and group sorted"
 msgstr "切换清单显示/分组排序"
@@ -26486,50 +26749,3 @@ msgstr ""
 msgid "Installation failed"
 msgstr "安装失败"
 
-#~ msgid ""
-#~ "Enable user disk quota accounting enabled, and optionally enforce limits"
-#~ msgstr "启用用户磁盘配额记账及可选强制限制"
-
-#~ msgid "Printer on SMB/Windows 95/98/NT server"
-#~ msgstr "SMB/Windows 95/98/NT 服务器上的打印机"
-
-#~ msgid "Found printer on %s..."
-#~ msgstr "在 %s 上找到了打印机..."
-
-#~ msgid "Useless without Terminal Server"
-#~ msgstr "没有终端服务器就无用"
-
-#~ msgid ""
-#~ "Please select default client type.\n"
-#~ "    'Thin' clients run everything off the server's CPU/RAM, using the "
-#~ "client display.\n"
-#~ "    'Fat' clients use their own CPU/RAM but the server's filesystem."
-#~ msgstr ""
-#~ "请选择默认客户端类型。\n"
-#~ "    “瘦”客户端会使用服务器的 CPU/内存, 只是使用客户端进行显示。\n"
-#~ "    “胖”客户端将会使用自己的 CPU/内存, 但会使用服务器的文件系统。"
-
-#~ msgid "dhcpd Config..."
-#~ msgstr "dhcpd 配置..."
-
-#~ msgid ""
-#~ "package 'ImageMagick' is required to be able to complete configuration.\n"
-#~ "Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-#~ msgstr ""
-#~ "要正常工作需要软件包 ImageMagick。\n"
-#~ "请单击“确定”安装 ImageMagick 或“取消”退出"
-
-#~ msgid "Unable to select wireless network: %s"
-#~ msgstr "无法选择无线网络: %s"
-
-#~ msgid "Interactive intrusion detection"
-#~ msgstr "交互式检测入侵"
-
-#~ msgid "Actions"
-#~ msgstr "动作"
-
-#~ msgid "Active Firewall: intrusion detected"
-#~ msgstr "活动的防火墙: 检测到了入侵"
-
-#~ msgid "Do you want to blacklist the attacker?"
-#~ msgstr "您是否想要将入侵者加入黑名单?"
-- 
cgit v1.2.1