From 01cf583e7f4af29e57846e4110270c77df30b561 Mon Sep 17 00:00:00 2001
From: Funda Wang <fwang@mandriva.org>
Date: Wed, 14 Sep 2005 13:30:54 +0000
Subject: Updated POT file.

---
 perl-install/share/po/zh_CN.po | 1178 ++++++++++++++++++++--------------------
 1 file changed, 586 insertions(+), 592 deletions(-)

(limited to 'perl-install/share/po/zh_CN.po')

diff --git a/perl-install/share/po/zh_CN.po b/perl-install/share/po/zh_CN.po
index fe8788974..264da1d33 100644
--- a/perl-install/share/po/zh_CN.po
+++ b/perl-install/share/po/zh_CN.po
@@ -7,7 +7,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: DrakX 2006\n"
-"POT-Creation-Date: 2005-09-08 00:35+0800\n"
+"POT-Creation-Date: 2005-09-14 19:41+0800\n"
 "PO-Revision-Date: 2005-09-13 00:50+0800\n"
 "Last-Translator: Funda Wang <fundawang@linux.net.cn>\n"
 "Language-Team: Mandriva Linux i18n Team <cooker-i18n@mandrivalinux.org>\n"
@@ -71,7 +71,7 @@ msgstr ""
 "请单击按钮重新启动计算机, 拔出该密钥盘之后, 去掉写保护后再插入, \n"
 "然后再次调用 Mandriva Move。"
 
-#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1322
+#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1326
 #, c-format
 msgid "Reboot"
 msgstr "重新启动"
@@ -163,50 +163,51 @@ msgstr "请稍候, 正在检测并配置设备..."
 #: diskdrake/interactive.pm:243 diskdrake/interactive.pm:404
 #: diskdrake/interactive.pm:422 diskdrake/interactive.pm:558
 #: diskdrake/interactive.pm:563 diskdrake/smbnfs_gtk.pm:41 do_pkgs.pm:19
-#: do_pkgs.pm:39 do_pkgs.pm:52 fsedit.pm:209 install_any.pm:1754
-#: install_any.pm:1806 install_steps.pm:81 install_steps_interactive.pm:37
+#: do_pkgs.pm:39 do_pkgs.pm:52 fsedit.pm:209 install_any.pm:1770
+#: install_any.pm:1822 install_steps.pm:81 install_steps_interactive.pm:37
 #: interactive/http.pm:117 interactive/http.pm:118 network/ndiswrapper.pm:27
 #: network/ndiswrapper.pm:42 network/ndiswrapper.pm:89
-#: network/ndiswrapper.pm:101 network/netconnect.pm:908
-#: network/netconnect.pm:912 network/netconnect.pm:916
-#: network/netconnect.pm:921 network/netconnect.pm:1065
-#: network/netconnect.pm:1069 network/netconnect.pm:1188
-#: network/netconnect.pm:1193 network/netconnect.pm:1213
-#: network/netconnect.pm:1366 network/thirdparty.pm:291
-#: network/thirdparty.pm:298 network/thirdparty.pm:334
-#: network/thirdparty.pm:336 network/thirdparty.pm:357
-#: network/thirdparty.pm:381 printer/printerdrake.pm:244
-#: printer/printerdrake.pm:251 printer/printerdrake.pm:276
-#: printer/printerdrake.pm:422 printer/printerdrake.pm:427
-#: printer/printerdrake.pm:440 printer/printerdrake.pm:450
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:686
-#: printer/printerdrake.pm:690 printer/printerdrake.pm:772
-#: printer/printerdrake.pm:1576 printer/printerdrake.pm:1624
-#: printer/printerdrake.pm:1661 printer/printerdrake.pm:1706
-#: printer/printerdrake.pm:1710 printer/printerdrake.pm:1724
-#: printer/printerdrake.pm:1816 printer/printerdrake.pm:1897
-#: printer/printerdrake.pm:1901 printer/printerdrake.pm:1905
-#: printer/printerdrake.pm:1954 printer/printerdrake.pm:2012
-#: printer/printerdrake.pm:2016 printer/printerdrake.pm:2030
-#: printer/printerdrake.pm:2150 printer/printerdrake.pm:2154
-#: printer/printerdrake.pm:2197 printer/printerdrake.pm:2272
-#: printer/printerdrake.pm:2290 printer/printerdrake.pm:2299
-#: printer/printerdrake.pm:2308 printer/printerdrake.pm:2319
-#: printer/printerdrake.pm:2383 printer/printerdrake.pm:2478
-#: printer/printerdrake.pm:3037 printer/printerdrake.pm:3321
-#: printer/printerdrake.pm:3327 printer/printerdrake.pm:3891
-#: printer/printerdrake.pm:3895 printer/printerdrake.pm:3899
-#: printer/printerdrake.pm:4360 printer/printerdrake.pm:4601
-#: printer/printerdrake.pm:4629 printer/printerdrake.pm:4706
-#: printer/printerdrake.pm:4772 printer/printerdrake.pm:4892
-#: standalone/drakTermServ:394 standalone/drakTermServ:464
-#: standalone/drakTermServ:473 standalone/drakTermServ:774
-#: standalone/drakTermServ:781 standalone/drakTermServ:802
-#: standalone/drakTermServ:849 standalone/drakTermServ:1095
-#: standalone/drakTermServ:1572 standalone/drakTermServ:1588
-#: standalone/drakTermServ:1593 standalone/drakTermServ:1601
-#: standalone/drakTermServ:1613 standalone/drakTermServ:1634
-#: standalone/drakauth:36 standalone/drakbackup:498 standalone/drakbackup:612
+#: network/ndiswrapper.pm:101 network/netconnect.pm:834
+#: network/netconnect.pm:933 network/netconnect.pm:937
+#: network/netconnect.pm:941 network/netconnect.pm:946
+#: network/netconnect.pm:1091 network/netconnect.pm:1095
+#: network/netconnect.pm:1214 network/netconnect.pm:1219
+#: network/netconnect.pm:1239 network/netconnect.pm:1393
+#: network/thirdparty.pm:306 network/thirdparty.pm:313
+#: network/thirdparty.pm:357 network/thirdparty.pm:359
+#: network/thirdparty.pm:380 network/thirdparty.pm:404
+#: printer/printerdrake.pm:244 printer/printerdrake.pm:251
+#: printer/printerdrake.pm:276 printer/printerdrake.pm:422
+#: printer/printerdrake.pm:427 printer/printerdrake.pm:440
+#: printer/printerdrake.pm:450 printer/printerdrake.pm:514
+#: printer/printerdrake.pm:686 printer/printerdrake.pm:690
+#: printer/printerdrake.pm:772 printer/printerdrake.pm:1576
+#: printer/printerdrake.pm:1624 printer/printerdrake.pm:1661
+#: printer/printerdrake.pm:1706 printer/printerdrake.pm:1710
+#: printer/printerdrake.pm:1724 printer/printerdrake.pm:1816
+#: printer/printerdrake.pm:1897 printer/printerdrake.pm:1901
+#: printer/printerdrake.pm:1905 printer/printerdrake.pm:1954
+#: printer/printerdrake.pm:2012 printer/printerdrake.pm:2016
+#: printer/printerdrake.pm:2030 printer/printerdrake.pm:2150
+#: printer/printerdrake.pm:2154 printer/printerdrake.pm:2197
+#: printer/printerdrake.pm:2272 printer/printerdrake.pm:2290
+#: printer/printerdrake.pm:2299 printer/printerdrake.pm:2308
+#: printer/printerdrake.pm:2319 printer/printerdrake.pm:2383
+#: printer/printerdrake.pm:2478 printer/printerdrake.pm:3037
+#: printer/printerdrake.pm:3321 printer/printerdrake.pm:3327
+#: printer/printerdrake.pm:3891 printer/printerdrake.pm:3895
+#: printer/printerdrake.pm:3899 printer/printerdrake.pm:4360
+#: printer/printerdrake.pm:4601 printer/printerdrake.pm:4629
+#: printer/printerdrake.pm:4706 printer/printerdrake.pm:4772
+#: printer/printerdrake.pm:4892 standalone/drakTermServ:394
+#: standalone/drakTermServ:464 standalone/drakTermServ:473
+#: standalone/drakTermServ:774 standalone/drakTermServ:781
+#: standalone/drakTermServ:802 standalone/drakTermServ:849
+#: standalone/drakTermServ:1095 standalone/drakTermServ:1572
+#: standalone/drakTermServ:1588 standalone/drakTermServ:1593
+#: standalone/drakTermServ:1601 standalone/drakTermServ:1613
+#: standalone/drakTermServ:1634 standalone/drakauth:36
+#: standalone/drakbackup:498 standalone/drakbackup:612
 #: standalone/drakbackup:1093 standalone/drakbackup:1125
 #: standalone/drakbackup:1648 standalone/drakbackup:1804
 #: standalone/drakbackup:2429 standalone/drakbackup:4118
@@ -228,9 +229,9 @@ msgstr "请稍候, 正在检测并配置设备..."
 #: standalone/draksambashare:1168 standalone/draksambashare:1177
 #: standalone/draksambashare:1186 standalone/draksambashare:1206
 #: standalone/draksambashare:1214 standalone/draksambashare:1226
-#: standalone/draksplash:163 standalone/drakxtv:107
-#: standalone/finish-install:49 standalone/logdrake:168
-#: standalone/logdrake:437 standalone/logdrake:442 standalone/scannerdrake:59
+#: standalone/draksplash:162 standalone/drakxtv:107
+#: standalone/finish-install:49 standalone/logdrake:171
+#: standalone/logdrake:440 standalone/logdrake:445 standalone/scannerdrake:59
 #: standalone/scannerdrake:202 standalone/scannerdrake:261
 #: standalone/scannerdrake:715 standalone/scannerdrake:726
 #: standalone/scannerdrake:865 standalone/scannerdrake:876
@@ -470,39 +471,38 @@ msgstr ""
 msgid "Custom"
 msgstr "自定义"
 
-#: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14
-#: install_steps_interactive.pm:86 install_steps_interactive.pm:1322
+#: Xconfig/main.pm:127 diskdrake/dav.pm:26 help.pm:14
+#: install_steps_interactive.pm:86 install_steps_interactive.pm:1326
 #: printer/printerdrake.pm:882 printer/printerdrake.pm:899
 #: printer/printerdrake.pm:4701 printer/printerdrake.pm:5165
-#: standalone/drakhosts:263 standalone/drakids:62 standalone/drakids:71
-#: standalone/drakids:79 standalone/drakroam:168 standalone/draksplash:94
-#: standalone/logdrake:173 standalone/net_applet:82
+#: standalone/drakhosts:263 standalone/drakroam:168 standalone/draksplash:93
+#: standalone/logdrake:176 standalone/net_applet:82
 #: standalone/scannerdrake:477
 #, c-format
 msgid "Quit"
 msgstr "退出"
 
-#: Xconfig/main.pm:117
+#: Xconfig/main.pm:129
 #, c-format
 msgid "Graphic Card"
 msgstr "显示卡"
 
-#: Xconfig/main.pm:120 Xconfig/monitor.pm:110
+#: Xconfig/main.pm:132 Xconfig/monitor.pm:110
 #, c-format
 msgid "Monitor"
 msgstr "显示器"
 
-#: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:287
+#: Xconfig/main.pm:135 Xconfig/resolution_and_depth.pm:287
 #, c-format
 msgid "Resolution"
 msgstr "分辨率"
 
-#: Xconfig/main.pm:128
+#: Xconfig/main.pm:138
 #, c-format
 msgid "Test"
 msgstr "测试"
 
-#: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:448
+#: Xconfig/main.pm:143 diskdrake/dav.pm:65 diskdrake/interactive.pm:448
 #: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:79
 #: printer/printerdrake.pm:1125 standalone/drakfont:491
 #: standalone/drakfont:554
@@ -510,12 +510,12 @@ msgstr "测试"
 msgid "Options"
 msgstr "选项"
 
-#: Xconfig/main.pm:168
+#: Xconfig/main.pm:178
 #, c-format
 msgid "Your Xorg configuration file is broken, we will ignore it."
 msgstr "您的 Xorg 配置文件已经损坏, 我们将会忽略该文件。"
 
-#: Xconfig/main.pm:186
+#: Xconfig/main.pm:196
 #, c-format
 msgid ""
 "Keep the changes?\n"
@@ -641,16 +641,16 @@ msgstr "显示卡: %s"
 #: standalone/drakbackup:4035 standalone/drakbackup:4079
 #: standalone/drakconnect:158 standalone/drakconnect:852
 #: standalone/drakconnect:939 standalone/drakconnect:1030
-#: standalone/drakfont:575 standalone/drakfont:585 standalone/draksplash:174
-#: standalone/drakups:212 standalone/net_monitor:339 ugtk2.pm:412 ugtk2.pm:510
-#: ugtk2.pm:919 ugtk2.pm:942
+#: standalone/drakfont:575 standalone/drakfont:585 standalone/draksplash:173
+#: standalone/drakups:212 standalone/net_monitor:339 ugtk2.pm:392 ugtk2.pm:490
+#: ugtk2.pm:899 ugtk2.pm:922
 #, c-format
 msgid "Ok"
 msgstr "确定"
 
 #: Xconfig/resolution_and_depth.pm:373 diskdrake/smbnfs_gtk.pm:80 help.pm:89
-#: help.pm:444 install_steps_gtk.pm:458 install_steps_interactive.pm:425
-#: install_steps_interactive.pm:830 interactive.pm:120 interactive.pm:437
+#: help.pm:444 install_steps_gtk.pm:458 install_steps_interactive.pm:429
+#: install_steps_interactive.pm:834 interactive.pm:120 interactive.pm:437
 #: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
 #: interactive/stdio.pm:39 interactive/stdio.pm:142
 #: printer/printerdrake.pm:3971 standalone/drakautoinst:215
@@ -658,21 +658,21 @@ msgstr "确定"
 #: standalone/drakbackup:3905 standalone/drakbackup:3963
 #: standalone/drakconnect:157 standalone/drakconnect:937
 #: standalone/drakconnect:1029 standalone/drakfont:585 standalone/drakfont:663
-#: standalone/drakfont:740 standalone/draksplash:174 standalone/drakups:219
-#: standalone/logdrake:173 standalone/net_monitor:338 ugtk2.pm:406
-#: ugtk2.pm:508 ugtk2.pm:517 ugtk2.pm:919
+#: standalone/drakfont:740 standalone/draksplash:173 standalone/drakups:219
+#: standalone/logdrake:176 standalone/net_monitor:338 ugtk2.pm:386
+#: ugtk2.pm:488 ugtk2.pm:497 ugtk2.pm:899
 #, c-format
 msgid "Cancel"
 msgstr "取消"
 
 #: Xconfig/resolution_and_depth.pm:373 diskdrake/hd_gtk.pm:150
-#: install_steps_gtk.pm:232 install_steps_gtk.pm:620 interactive.pm:564
+#: install_steps_gtk.pm:232 install_steps_gtk.pm:620 interactive.pm:567
 #: interactive/gtk.pm:681 interactive/gtk.pm:683 standalone/drakTermServ:284
 #: standalone/drakbackup:3897 standalone/drakbug:105
 #: standalone/drakconnect:153 standalone/drakconnect:236
 #: standalone/drakfont:510 standalone/draknfs:206 standalone/drakperm:133
 #: standalone/draksambashare:314 standalone/draksec:342 standalone/draksec:344
-#: standalone/draksec:362 standalone/draksec:364 ugtk2.pm:1051 ugtk2.pm:1052
+#: standalone/draksec:362 standalone/draksec:364 ugtk2.pm:1031 ugtk2.pm:1032
 #, c-format
 msgid "Help"
 msgstr "帮助"
@@ -808,7 +808,7 @@ msgstr ""
 msgid "What norm is your TV using?"
 msgstr "您的电视信号是什么制式?"
 
-#: Xconfig/xfree.pm:647
+#: Xconfig/xfree.pm:648
 #, c-format
 msgid ""
 "_:weird aspect ratio\n"
@@ -972,7 +972,7 @@ msgid "Force No Local APIC"
 msgstr "强制无本地 APIC"
 
 #: any.pm:294 any.pm:650 authentication.pm:186 diskdrake/smbnfs_gtk.pm:180
-#: network/netconnect.pm:563 printer/printerdrake.pm:1888
+#: network/netconnect.pm:568 printer/printerdrake.pm:1888
 #: printer/printerdrake.pm:2009 standalone/drakbackup:1630
 #: standalone/drakbackup:3504 standalone/drakups:299
 #, c-format
@@ -1328,7 +1328,7 @@ msgstr "默认使用 Unicode"
 msgid "All languages"
 msgstr "全部语言"
 
-#: any.pm:840 help.pm:566 help.pm:855 install_steps_interactive.pm:951
+#: any.pm:840 help.pm:566 help.pm:855 install_steps_interactive.pm:955
 #, c-format
 msgid "Country / Region"
 msgstr "国家/地区"
@@ -1359,8 +1359,8 @@ msgstr "高级"
 msgid "Input method:"
 msgstr "输入法:"
 
-#: any.pm:856 install_any.pm:417 network/netconnect.pm:301
-#: network/netconnect.pm:306 network/netconnect.pm:1179 network/wireless.pm:7
+#: any.pm:856 install_any.pm:417 network/netconnect.pm:306
+#: network/netconnect.pm:311 network/netconnect.pm:1205 network/wireless.pm:7
 #: printer/printerdrake.pm:105 printer/printerdrake.pm:2430
 #, c-format
 msgid "None"
@@ -1418,6 +1418,7 @@ msgstr "运行“Drak 用户管理”"
 #: printer/printerdrake.pm:4200 printer/printerdrake.pm:4201
 #: printer/printerdrake.pm:5483 standalone/drakTermServ:294
 #: standalone/drakbackup:4097 standalone/drakbug:126 standalone/drakfont:498
+#: standalone/drakids:64 standalone/drakids:77 standalone/drakids:85
 #: standalone/draknfs:210 standalone/net_monitor:117
 #: standalone/printerdrake:583
 #, c-format
@@ -1698,7 +1699,7 @@ msgstr "无密码"
 msgid "This password is too short (it must be at least %d characters long)"
 msgstr "这个密码太简单了(至少要有 %d 个字符)"
 
-#: authentication.pm:188 network/netconnect.pm:306 network/netconnect.pm:564
+#: authentication.pm:188 network/netconnect.pm:311 network/netconnect.pm:569
 #: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:481
 #, c-format
 msgid "Authentication"
@@ -1710,7 +1711,7 @@ msgid "Can not use broadcast with no NIS domain"
 msgstr "没有 NIS 域无法广播"
 
 #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: bootloader.pm:731
+#: bootloader.pm:764
 #, c-format
 msgid ""
 "Welcome to the operating system chooser!\n"
@@ -1725,56 +1726,56 @@ msgstr ""
 "wait for default boot.\n"
 "\n"
 
-#: bootloader.pm:871
+#: bootloader.pm:904
 #, c-format
 msgid "LILO with graphical menu"
 msgstr "图形菜单 LILO"
 
-#: bootloader.pm:872
+#: bootloader.pm:905
 #, c-format
 msgid "LILO with text menu"
 msgstr "文本菜单 LILO"
 
-#: bootloader.pm:873
+#: bootloader.pm:906
 #, c-format
 msgid "GRUB with graphical menu"
 msgstr "图形菜单 GRUB"
 
-#: bootloader.pm:874
+#: bootloader.pm:907
 #, c-format
 msgid "GRUB with text menu"
 msgstr "文本菜单 GRUB"
 
-#: bootloader.pm:875
+#: bootloader.pm:908
 #, c-format
 msgid "Yaboot"
 msgstr "Yaboot"
 
-#: bootloader.pm:953
+#: bootloader.pm:986
 #, c-format
 msgid "not enough room in /boot"
 msgstr "/boot 中没有足够空间"
 
-#: bootloader.pm:1442
+#: bootloader.pm:1476
 #, c-format
 msgid "You can not install the bootloader on a %s partition\n"
 msgstr "%s 分区不能安装启动引导程序\n"
 
-#: bootloader.pm:1482
+#: bootloader.pm:1516
 #, c-format
 msgid ""
 "Your bootloader configuration must be updated because partition has been "
 "renumbered"
 msgstr "必须更新您的启动引导程序配置, 因为分区已经重新编号"
 
-#: bootloader.pm:1495
+#: bootloader.pm:1529
 #, c-format
 msgid ""
 "The bootloader can not be installed correctly. You have to boot rescue and "
 "choose \"%s\""
 msgstr "无法正确安装启动引导程序。您需要以抢救方式启动并选择“%s”"
 
-#: bootloader.pm:1496
+#: bootloader.pm:1530
 #, c-format
 msgid "Re-install Boot Loader"
 msgstr "重新安装启动引导程序"
@@ -1814,12 +1815,12 @@ msgstr "1 分钟"
 msgid "%d seconds"
 msgstr "%d 秒钟"
 
-#: common.pm:255
+#: common.pm:257
 #, c-format
 msgid "kdesu missing"
 msgstr "缺少 kdesu"
 
-#: common.pm:258
+#: common.pm:260
 #, c-format
 msgid "consolehelper missing"
 msgstr "缺少 consolehelper"
@@ -2006,7 +2007,7 @@ msgstr "中国台湾"
 msgid "South Africa"
 msgstr "南非"
 
-#: crypto.pm:77 crypto.pm:107 lang.pm:416 network/netconnect.pm:45
+#: crypto.pm:77 crypto.pm:112 lang.pm:416 network/netconnect.pm:45
 #, c-format
 msgid "United States"
 msgstr "美国"
@@ -2849,7 +2850,7 @@ msgstr "大小: %s\n"
 msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
 msgstr "硬盘参数: %s 柱面, %s 磁头, %s 扇区\n"
 
-#: diskdrake/interactive.pm:1275
+#: diskdrake/interactive.pm:1275 network/thirdparty.pm:316
 #, c-format
 msgid "Info: "
 msgstr "信息: "
@@ -2889,7 +2890,7 @@ msgstr "这个加密密钥太简单了(至少要有 %d 个字符)"
 msgid "The encryption keys do not match"
 msgstr "两次加密密钥不符"
 
-#: diskdrake/interactive.pm:1329 network/netconnect.pm:1016
+#: diskdrake/interactive.pm:1329 network/netconnect.pm:1041
 #: standalone/drakconnect:419 standalone/drakroam:112
 #, c-format
 msgid "Encryption key"
@@ -2967,8 +2968,8 @@ msgstr "无法安装 %s 软件包!"
 msgid "Mandatory package %s is missing"
 msgstr "无法找到必需的软件包 %s"
 
-#: do_pkgs.pm:35 harddrake/sound.pm:271 install_steps_interactive.pm:1307
-#: keyboard.pm:391 network/ndiswrapper.pm:95 network/netconnect.pm:455
+#: do_pkgs.pm:35 harddrake/sound.pm:271 install_steps_interactive.pm:1311
+#: keyboard.pm:391 network/ndiswrapper.pm:95 network/netconnect.pm:460
 #: printer/printerdrake.pm:1429 printer/printerdrake.pm:2461
 #: printer/printerdrake.pm:2561 printer/printerdrake.pm:2607
 #: printer/printerdrake.pm:2674 printer/printerdrake.pm:2709
@@ -2978,9 +2979,10 @@ msgstr "无法找到必需的软件包 %s"
 #: standalone/drakTermServ:326 standalone/drakTermServ:1205
 #: standalone/drakTermServ:1266 standalone/drakTermServ:1931
 #: standalone/drakbackup:497 standalone/drakbackup:596 standalone/drakboot:133
-#: standalone/drakclock:224 standalone/drakconnect:973 standalone/drakups:27
-#: standalone/harddrake2:479 standalone/localedrake:43
-#: standalone/scannerdrake:51 standalone/scannerdrake:940
+#: standalone/drakclock:224 standalone/drakconnect:973 standalone/drakperm:380
+#: standalone/drakperm:390 standalone/drakups:27 standalone/harddrake2:479
+#: standalone/localedrake:43 standalone/scannerdrake:51
+#: standalone/scannerdrake:940
 #, c-format
 msgid "Warning"
 msgstr "警告"
@@ -3253,7 +3255,7 @@ msgstr "没有足够的空闲空间供自动分配"
 msgid "Nothing to do"
 msgstr "不做任何事"
 
-#: harddrake/data.pm:62 install_any.pm:1689
+#: harddrake/data.pm:62 install_any.pm:1705
 #, c-format
 msgid "Floppy"
 msgstr "软盘"
@@ -3263,12 +3265,12 @@ msgstr "软盘"
 msgid "Zip"
 msgstr "Zip"
 
-#: harddrake/data.pm:88 install_any.pm:1690
+#: harddrake/data.pm:88 install_any.pm:1706
 #, c-format
 msgid "Hard Disk"
 msgstr "硬盘"
 
-#: harddrake/data.pm:97 install_any.pm:1691
+#: harddrake/data.pm:97 install_any.pm:1707
 #, c-format
 msgid "CDROM"
 msgstr "CDROM"
@@ -3358,7 +3360,7 @@ msgstr "蓝牙设备"
 msgid "Ethernetcard"
 msgstr "以太网卡"
 
-#: harddrake/data.pm:282 network/netconnect.pm:476
+#: harddrake/data.pm:282 network/netconnect.pm:481
 #, c-format
 msgid "Modem"
 msgstr "调制解调器"
@@ -3379,7 +3381,7 @@ msgid "AGP controllers"
 msgstr "AGP 控制器"
 
 #: harddrake/data.pm:324 help.pm:186 help.pm:855
-#: install_steps_interactive.pm:983
+#: install_steps_interactive.pm:987
 #, c-format
 msgid "Printer"
 msgstr "打印机"
@@ -3446,7 +3448,7 @@ msgid "Bridges and system controllers"
 msgstr "桥接和系统控制器"
 
 #: harddrake/data.pm:447 help.pm:855 install_steps_interactive.pm:119
-#: install_steps_interactive.pm:943 standalone/keyboarddrake:29
+#: install_steps_interactive.pm:947 standalone/keyboarddrake:29
 #, c-format
 msgid "Keyboard"
 msgstr "键盘"
@@ -3456,7 +3458,7 @@ msgstr "键盘"
 msgid "Tablet and touchscreen"
 msgstr "手写板和触摸屏"
 
-#: harddrake/data.pm:469 help.pm:855 install_steps_interactive.pm:976
+#: harddrake/data.pm:469 help.pm:855 install_steps_interactive.pm:980
 #, c-format
 msgid "Mouse"
 msgstr "鼠标"
@@ -3769,7 +3771,7 @@ msgstr ""
 "新启动您的计算机。"
 
 #: help.pm:14 install_steps_gtk.pm:542 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:734 standalone/drakautoinst:214
+#: install_steps_interactive.pm:738 standalone/drakautoinst:214
 #, c-format
 msgid "Accept"
 msgstr "接受"
@@ -3850,10 +3852,10 @@ msgstr "用户名"
 
 #: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:237
 #: install_steps_gtk.pm:685 interactive.pm:436 interactive/newt.pm:321
-#: network/thirdparty.pm:347 printer/printerdrake.pm:3973
+#: network/thirdparty.pm:370 printer/printerdrake.pm:3973
 #: standalone/drakTermServ:384 standalone/drakbackup:3954
 #: standalone/drakbackup:4048 standalone/drakbackup:4065
-#: standalone/drakbackup:4083 ugtk2.pm:510
+#: standalone/drakbackup:4083 ugtk2.pm:490
 #, c-format
 msgid "Next"
 msgstr "下一步"
@@ -4061,7 +4063,7 @@ msgstr "开发"
 msgid "Graphical Environment"
 msgstr "图形环境"
 
-#: help.pm:146 install_steps_gtk.pm:235 install_steps_interactive.pm:642
+#: help.pm:146 install_steps_gtk.pm:235 install_steps_interactive.pm:646
 #, c-format
 msgid "Individual package selection"
 msgstr "选择单个软件包"
@@ -4071,7 +4073,7 @@ msgstr "选择单个软件包"
 msgid "Upgrade"
 msgstr "升级"
 
-#: help.pm:146 install_steps_interactive.pm:600
+#: help.pm:146 install_steps_interactive.pm:604
 #, c-format
 msgid "With X"
 msgstr "安装 X"
@@ -4150,17 +4152,17 @@ msgstr ""
 "多台计算机, 此选项可能非常有用。单击此图标后, 您需要插入另外一次安装结束后创"
 "建的那张软盘。参看最后一步的第二条提示, 其中描述了如何创建这样的软盘。"
 
-#: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:925
+#: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:939
 #: interactive.pm:161 modules/interactive.pm:71 standalone/drakbackup:2517
-#: standalone/draksec:54 standalone/harddrake2:309 ugtk2.pm:918 wizards.pm:156
+#: standalone/draksec:54 standalone/harddrake2:309 ugtk2.pm:898 wizards.pm:156
 #, c-format
 msgid "No"
 msgstr "否"
 
-#: help.pm:180 help.pm:285 help.pm:444 install_any.pm:925 interactive.pm:161
+#: help.pm:180 help.pm:285 help.pm:444 install_any.pm:939 interactive.pm:161
 #: modules/interactive.pm:71 printer/printerdrake.pm:883
 #: printer/printerdrake.pm:898 standalone/drakbackup:2517
-#: standalone/draksec:55 standalone/harddrake2:308 ugtk2.pm:918 wizards.pm:156
+#: standalone/draksec:55 standalone/harddrake2:308 ugtk2.pm:898 wizards.pm:156
 #, c-format
 msgid "Yes"
 msgstr "是"
@@ -4254,7 +4256,7 @@ msgstr ""
 "Internet。最好选择地理位置离您较近的时间服务器。此选项还会自动安装时间服务"
 "器, 这样您局域网中的其它计算机都能够进行自动校时了。"
 
-#: help.pm:217 install_steps_interactive.pm:878
+#: help.pm:217 install_steps_interactive.pm:882
 #, c-format
 msgid "Hardware clock set to GMT"
 msgstr "您的系统时钟设定为 GMT"
@@ -4669,17 +4671,17 @@ msgstr ""
 msgid "Generate auto-install floppy"
 msgstr "生成自动安装软盘"
 
-#: help.pm:409 install_steps_interactive.pm:1333
+#: help.pm:409 install_steps_interactive.pm:1337
 #, c-format
 msgid "Replay"
 msgstr "重现"
 
-#: help.pm:409 install_steps_interactive.pm:1333
+#: help.pm:409 install_steps_interactive.pm:1337
 #, c-format
 msgid "Automated"
 msgstr "自动"
 
-#: help.pm:409 install_steps_interactive.pm:1336
+#: help.pm:409 install_steps_interactive.pm:1340
 #, c-format
 msgid "Save packages selection"
 msgstr "保存软件包选择"
@@ -4731,7 +4733,7 @@ msgstr ""
 #: interactive/newt.pm:318 printer/printerdrake.pm:3971
 #: standalone/drakTermServ:363 standalone/drakbackup:3914
 #: standalone/drakbackup:3953 standalone/drakbackup:4064
-#: standalone/drakbackup:4079 ugtk2.pm:508
+#: standalone/drakbackup:4079 ugtk2.pm:488
 #, c-format
 msgid "Previous"
 msgstr "上一步"
@@ -5483,8 +5485,8 @@ msgstr ""
 "\"%s\"：如果在您的系统中检测到了声卡, 则会在此处显示。如果您发现在此显示的声"
 "卡与您系统中实际安装的声卡并不相同, 您可以单击该按钮选择不同的驱动程序。"
 
-#: help.pm:788 help.pm:855 install_steps_interactive.pm:1010
-#: install_steps_interactive.pm:1027
+#: help.pm:788 help.pm:855 install_steps_interactive.pm:1014
+#: install_steps_interactive.pm:1031
 #, c-format
 msgid "Sound card"
 msgstr "声卡"
@@ -5615,13 +5617,13 @@ msgstr ""
 " * \"%s\"：在此您可以精确调整要在您的计算机上运行哪些服务。如果您要将此计算机"
 "用作服务器, 那么应该复查这一设置。"
 
-#: help.pm:855 install_steps_interactive.pm:874
-#: install_steps_interactive.pm:969 standalone/drakclock:100
+#: help.pm:855 install_steps_interactive.pm:878
+#: install_steps_interactive.pm:973 standalone/drakclock:100
 #, c-format
 msgid "Timezone"
 msgstr "时区"
 
-#: help.pm:855 install_steps_interactive.pm:1043
+#: help.pm:855 install_steps_interactive.pm:1047
 #, c-format
 msgid "TV card"
 msgstr "电视卡"
@@ -5636,33 +5638,33 @@ msgstr "ISDN 卡"
 msgid "Graphical Interface"
 msgstr "图形界面"
 
-#: help.pm:855 install_any.pm:1712 install_steps_interactive.pm:1061
+#: help.pm:855 install_any.pm:1728 install_steps_interactive.pm:1065
 #: standalone/drakbackup:2035
 #, c-format
 msgid "Network"
 msgstr "网络"
 
-#: help.pm:855 install_steps_interactive.pm:1073
+#: help.pm:855 install_steps_interactive.pm:1077
 #, c-format
 msgid "Proxies"
 msgstr "代理服务器"
 
-#: help.pm:855 install_steps_interactive.pm:1084
+#: help.pm:855 install_steps_interactive.pm:1088
 #, c-format
 msgid "Security Level"
 msgstr "安全级别"
 
-#: help.pm:855 install_steps_interactive.pm:1098 network/drakfirewall.pm:189
+#: help.pm:855 install_steps_interactive.pm:1102 network/drakfirewall.pm:189
 #, c-format
 msgid "Firewall"
 msgstr "防火墙"
 
-#: help.pm:855 install_steps_interactive.pm:1114
+#: help.pm:855 install_steps_interactive.pm:1118
 #, c-format
 msgid "Bootloader"
 msgstr "引导程序"
 
-#: help.pm:855 install_steps_interactive.pm:1127 services.pm:114
+#: help.pm:855 install_steps_interactive.pm:1131 services.pm:114
 #: services.pm:157 services.pm:193
 #, c-format
 msgid "Services"
@@ -5714,7 +5716,7 @@ msgstr ""
 "无法读取与您的内核配套的内核模块(缺少文件 %s), 通常是因为启动软盘与安装介质不"
 "配套(请制作新的启动盘)"
 
-#: install2.pm:169
+#: install2.pm:168
 #, c-format
 msgid "You must also format %s"
 msgstr "您还必须格式化 %s"
@@ -5766,7 +5768,7 @@ msgstr "网络 (NFS)"
 msgid "Insert the CD 1 again"
 msgstr "再次插入第一张光盘"
 
-#: install_any.pm:473 standalone/drakbackup:112
+#: install_any.pm:473 network/netconnect.pm:834 standalone/drakbackup:112
 #, c-format
 msgid "No device found"
 msgstr "没有发现设备"
@@ -5781,7 +5783,7 @@ msgstr "插入光盘"
 msgid "Unable to mount CD-ROM"
 msgstr "无法挂载 CD-ROM"
 
-#: install_any.pm:516 install_any.pm:535
+#: install_any.pm:516 install_any.pm:537
 #, c-format
 msgid "URL of the mirror?"
 msgstr "镜像的 URL?"
@@ -5806,29 +5808,29 @@ msgstr "NFS 挂载的主机名？"
 msgid "Directory"
 msgstr "目录"
 
-#: install_any.pm:571
+#: install_any.pm:575
 #, c-format
 msgid ""
 "Can't find a package list file on this mirror. Make sure the location is "
 "correct."
 msgstr "无法在此镜像上找到软件包列表文件。请确定位置正确。"
 
-#: install_any.pm:647
+#: install_any.pm:652
 #, c-format
 msgid "Removing packages prior to upgrade..."
 msgstr "正在删除由于更新所致的软件包..."
 
-#: install_any.pm:679
+#: install_any.pm:694
 #, c-format
 msgid "Looking at packages already installed..."
 msgstr "正在查找已经安装过的软件包..."
 
-#: install_any.pm:683
+#: install_any.pm:698
 #, c-format
 msgid "Finding packages to upgrade..."
 msgstr "正在寻找可升级的程序..."
 
-#: install_any.pm:761
+#: install_any.pm:776
 #, c-format
 msgid ""
 "Change your Cd-Rom!\n"
@@ -5839,13 +5841,13 @@ msgstr ""
 "\n"
 "请在驱动器中插入标有“%s”的光盘, 然后单击“确定”。"
 
-#: install_any.pm:774
+#: install_any.pm:788
 #, c-format
 msgid "Copying in progress"
 msgstr "复制进行中"
 
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:916
+#: install_any.pm:930
 #, c-format
 msgid ""
 "You have selected the following server(s): %s\n"
@@ -5868,7 +5870,7 @@ msgstr ""
 "您真要安装这些服务器吗?\n"
 
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:939
+#: install_any.pm:953
 #, c-format
 msgid ""
 "The following packages will be removed to allow upgrading your system: %s\n"
@@ -5881,22 +5883,22 @@ msgstr ""
 "\n"
 "您确定要删除这些软件包吗?\n"
 
-#: install_any.pm:1375 partition_table.pm:597
+#: install_any.pm:1389 partition_table.pm:597
 #, c-format
 msgid "Error reading file %s"
 msgstr "请取文件 %s 出错"
 
-#: install_any.pm:1609
+#: install_any.pm:1623
 #, c-format
 msgid "The following disk(s) were renamed:"
 msgstr "下列盘片已重命名:"
 
-#: install_any.pm:1611
+#: install_any.pm:1625
 #, c-format
 msgid "%s (previously named as %s)"
 msgstr "%s(以前的名称为 %s)"
 
-#: install_any.pm:1649
+#: install_any.pm:1665
 #, c-format
 msgid ""
 "An error occurred - no valid devices were found on which to create new "
@@ -5904,52 +5906,52 @@ msgid ""
 msgstr ""
 "发生错误！新建文件系统时找不到可用的设备。请检查您的硬件以确定问题的原因"
 
-#: install_any.pm:1693
+#: install_any.pm:1709
 #, c-format
 msgid "HTTP"
 msgstr "HTTP"
 
-#: install_any.pm:1693
+#: install_any.pm:1709
 #, c-format
 msgid "FTP"
 msgstr "FTP"
 
-#: install_any.pm:1693
+#: install_any.pm:1709
 #, c-format
 msgid "NFS"
 msgstr "NFS"
 
-#: install_any.pm:1716
+#: install_any.pm:1732
 #, c-format
 msgid "Please choose a media"
 msgstr "请选择介质"
 
-#: install_any.pm:1732
+#: install_any.pm:1748
 #, c-format
 msgid "File already exists. Overwrite it?"
 msgstr "文件已经存在。覆盖吗?"
 
-#: install_any.pm:1736
+#: install_any.pm:1752
 #, c-format
 msgid "Permission denied"
 msgstr "没有权限"
 
-#: install_any.pm:1785
+#: install_any.pm:1801
 #, c-format
 msgid "Bad NFS name"
 msgstr "无效的 NFS 名称"
 
-#: install_any.pm:1806
+#: install_any.pm:1822
 #, c-format
 msgid "Bad media %s"
 msgstr "无效的介质 %s"
 
-#: install_any.pm:1853
+#: install_any.pm:1872
 #, c-format
 msgid "Can not make screenshots before partitioning"
 msgstr "无法在分区完成之前进行屏幕捕捉"
 
-#: install_any.pm:1860
+#: install_any.pm:1879
 #, c-format
 msgid "Screenshots will be available after install in %s"
 msgstr "安装完成后, 所有的屏幕抓图都会保存到 %s 之中"
@@ -6429,6 +6431,7 @@ msgstr ""
 "下一个光盘的内容的全部权利分别属于它们各自的作者, 并受到可应用与软件程序的知"
 "识产权和版权法律的保护。\n"
 
+#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
 #: install_messages.pm:131
 #, c-format
 msgid ""
@@ -6447,8 +6450,7 @@ msgid ""
 "Information on configuring your system is available in the post\n"
 "install chapter of the Official Mandriva Linux User's Guide."
 msgstr ""
-"恭喜。安装完成了。"
-"请取出启动介质, 然后按 ENTER 重新启动。\n"
+"恭喜。安装完成了。请取出启动介质, 然后按 ENTER 重新启动。\n"
 "\n"
 "\n"
 "要了解此版本 Mandriva Linux 的修订, 请访问以下勘误表: \n"
@@ -6459,18 +6461,12 @@ msgstr ""
 "\n"
 "关于安装后如何配置您的系统, 请查看 Mandriva Linux 官方用户手册。"
 
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:144
-#, c-format
-msgid "http://www.mandrivalinux.com/en/errata.php3"
-msgstr "http://www.mandrivalinux.com/en/errata.php3"
-
 #: install_steps.pm:253
 #, c-format
 msgid "Duplicate mount point %s"
 msgstr "重复的挂载点 %s"
 
-#: install_steps.pm:471
+#: install_steps.pm:475
 #, c-format
 msgid ""
 "Some important packages did not get installed properly.\n"
@@ -6499,13 +6495,12 @@ msgstr ""
 "如果您真的遇到问题的话，可以试试文本安装。要进入文本安装，请在启动时按“F1”，"
 "然后输入“text”。"
 
-#: install_steps_gtk.pm:211 install_steps_gtk.pm:228
-#: install_steps_interactive.pm:624
+#: install_steps_gtk.pm:211 install_steps_interactive.pm:628
 #, c-format
 msgid "Package Group Selection"
 msgstr "程序组选择"
 
-#: install_steps_gtk.pm:254 install_steps_interactive.pm:567
+#: install_steps_gtk.pm:254 install_steps_interactive.pm:571
 #, c-format
 msgid "Total size: %d / %d MB"
 msgstr "总共大小: %d / %d MB"
@@ -6540,7 +6535,7 @@ msgstr "重要程度: "
 msgid "You can not select/unselect this package"
 msgstr "您不能改变这个软件包的选定"
 
-#: install_steps_gtk.pm:340
+#: install_steps_gtk.pm:340 network/thirdparty.pm:316
 #, c-format
 msgid "due to missing %s"
 msgstr "由于缺少 %s"
@@ -6621,12 +6616,12 @@ msgstr "更新软件包选择"
 msgid "Minimal install"
 msgstr "最小安装"
 
-#: install_steps_gtk.pm:414 install_steps_interactive.pm:486
+#: install_steps_gtk.pm:414 install_steps_interactive.pm:490
 #, c-format
 msgid "Choose the packages you want to install"
 msgstr "选择您想要安装的软件包"
 
-#: install_steps_gtk.pm:431 install_steps_interactive.pm:710
+#: install_steps_gtk.pm:431 install_steps_interactive.pm:714
 #, c-format
 msgid "Installing"
 msgstr "正在安装"
@@ -6652,12 +6647,12 @@ msgid "%d packages"
 msgstr "%d 个软件包"
 
 #: install_steps_gtk.pm:542 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:734
+#: install_steps_interactive.pm:738
 #, c-format
 msgid "Refuse"
 msgstr "拒绝"
 
-#: install_steps_gtk.pm:546 install_steps_interactive.pm:738
+#: install_steps_gtk.pm:546 install_steps_interactive.pm:742
 #, c-format
 msgid ""
 "Change your Cd-Rom!\n"
@@ -6670,29 +6665,29 @@ msgstr ""
 "请在驱动器中插入标有“%s”的光盘, 然后单击“确定”。\n"
 "如果您没有这张光盘, 请单击“取消”, 放弃安装这张光盘上的软件。"
 
-#: install_steps_gtk.pm:559 install_steps_interactive.pm:749
+#: install_steps_gtk.pm:559 install_steps_interactive.pm:753
 #, c-format
 msgid "There was an error ordering packages:"
 msgstr "排列软件包时出错: "
 
-#: install_steps_gtk.pm:561 install_steps_interactive.pm:753
+#: install_steps_gtk.pm:561 install_steps_interactive.pm:757
 #, c-format
 msgid "There was an error installing packages:"
 msgstr "安装软件包时出错: "
 
-#: install_steps_gtk.pm:563 install_steps_interactive.pm:749
-#: install_steps_interactive.pm:753
+#: install_steps_gtk.pm:563 install_steps_interactive.pm:753
+#: install_steps_interactive.pm:757
 #, c-format
 msgid "Go on anyway?"
 msgstr "真的要继续?"
 
-#: install_steps_gtk.pm:585 install_steps_interactive.pm:929 steps.pm:30
+#: install_steps_gtk.pm:585 install_steps_interactive.pm:933 steps.pm:30
 #, c-format
 msgid "Summary"
 msgstr "概要"
 
-#: install_steps_gtk.pm:608 install_steps_interactive.pm:925
-#: install_steps_interactive.pm:1074
+#: install_steps_gtk.pm:608 install_steps_interactive.pm:929
+#: install_steps_interactive.pm:1078
 #, c-format
 msgid "not configured"
 msgstr "未配置"
@@ -6874,29 +6869,29 @@ msgstr "检查文件系统 %s 失败。您想修复错误吗?(注意, 有可能
 msgid "Not enough swap space to fulfill installation, please add some"
 msgstr "交换空间太少, 无法完成安装, 请扩大交换分区。"
 
-#: install_steps_interactive.pm:404
+#: install_steps_interactive.pm:406
 #, c-format
 msgid "Looking for available packages and rebuilding rpm database..."
 msgstr "正在寻找可安装的程序并重建 rpm 数据库..."
 
-#: install_steps_interactive.pm:405 install_steps_interactive.pm:455
+#: install_steps_interactive.pm:407 install_steps_interactive.pm:459
 #, c-format
 msgid "Looking for available packages..."
 msgstr "正在寻找可安装的程序..."
 
-#: install_steps_interactive.pm:424 install_steps_interactive.pm:829
+#: install_steps_interactive.pm:428 install_steps_interactive.pm:833
 #, c-format
 msgid "Choose a mirror from which to get the packages"
 msgstr "选择一个镜像网站来取得软件包"
 
-#: install_steps_interactive.pm:464
+#: install_steps_interactive.pm:468
 #, c-format
 msgid ""
 "Your system does not have enough space left for installation or upgrade (%d "
 "> %d)"
 msgstr "您的系统所剩余的空间不够进行安装或升级(%d > %d)"
 
-#: install_steps_interactive.pm:498
+#: install_steps_interactive.pm:502
 #, c-format
 msgid ""
 "Please choose load or save package selection.\n"
@@ -6905,55 +6900,55 @@ msgstr ""
 "请选择装入或保存软件包选择息。\n"
 "格式与自动安装生成的文件一样。"
 
-#: install_steps_interactive.pm:500
+#: install_steps_interactive.pm:504
 #, c-format
 msgid "Load"
 msgstr "装入"
 
-#: install_steps_interactive.pm:500 standalone/drakbackup:3932
-#: standalone/drakbackup:4005 standalone/logdrake:172
+#: install_steps_interactive.pm:504 standalone/drakbackup:3932
+#: standalone/drakbackup:4005 standalone/logdrake:175
 #, c-format
 msgid "Save"
 msgstr "保存"
 
-#: install_steps_interactive.pm:508
+#: install_steps_interactive.pm:512
 #, c-format
 msgid "Bad file"
 msgstr "文件有错"
 
-#: install_steps_interactive.pm:581
+#: install_steps_interactive.pm:585
 #, c-format
 msgid "Selected size is larger than available space"
 msgstr "您选择的超过可用空间"
 
-#: install_steps_interactive.pm:596
+#: install_steps_interactive.pm:600
 #, c-format
 msgid "Type of install"
 msgstr "安装类型"
 
-#: install_steps_interactive.pm:597
+#: install_steps_interactive.pm:601
 #, c-format
 msgid ""
 "You have not selected any group of packages.\n"
 "Please choose the minimal installation you want:"
 msgstr "您没有选择任何的组件, 请选择最小安装:"
 
-#: install_steps_interactive.pm:601
+#: install_steps_interactive.pm:605
 #, c-format
 msgid "With basic documentation (recommended!)"
 msgstr "安装基础文档(建议!)"
 
-#: install_steps_interactive.pm:602
+#: install_steps_interactive.pm:606
 #, c-format
 msgid "Truly minimal install (especially no urpmi)"
 msgstr "真正最小安装(注意没有 urpmi 包管理工具)"
 
-#: install_steps_interactive.pm:641 standalone/drakxtv:52
+#: install_steps_interactive.pm:645 standalone/drakxtv:52
 #, c-format
 msgid "All"
 msgstr "全部"
 
-#: install_steps_interactive.pm:680
+#: install_steps_interactive.pm:684
 #, c-format
 msgid ""
 "If you have all the CDs in the list below, click Ok.\n"
@@ -6964,17 +6959,17 @@ msgstr ""
 "如果您没有其中任何一张, 单击“取消”。\n"
 "如果您缺少其中一张, 清除它的选中标记, 然后单击“确认”。"
 
-#: install_steps_interactive.pm:685
+#: install_steps_interactive.pm:689
 #, c-format
 msgid "Cd-Rom labeled \"%s\""
 msgstr "标为 %s 的光盘"
 
-#: install_steps_interactive.pm:710
+#: install_steps_interactive.pm:714
 #, c-format
 msgid "Preparing installation"
 msgstr "正在准备安装"
 
-#: install_steps_interactive.pm:718
+#: install_steps_interactive.pm:722
 #, c-format
 msgid ""
 "Installing package %s\n"
@@ -6983,22 +6978,22 @@ msgstr ""
 "正在安装软件包 %s \n"
 "%d%%"
 
-#: install_steps_interactive.pm:767
+#: install_steps_interactive.pm:771
 #, c-format
 msgid "Post-install configuration"
 msgstr "安装后的配置"
 
-#: install_steps_interactive.pm:774
+#: install_steps_interactive.pm:778
 #, c-format
 msgid "Please ensure the Update Modules media is in drive %s"
 msgstr "请确定更新模块介质位于驱动器 %s"
 
-#: install_steps_interactive.pm:802
+#: install_steps_interactive.pm:806
 #, c-format
 msgid "Updates"
 msgstr "更新"
 
-#: install_steps_interactive.pm:803
+#: install_steps_interactive.pm:807
 #, c-format
 msgid ""
 "You now have the opportunity to download updated packages. These packages\n"
@@ -7017,142 +7012,142 @@ msgstr ""
 "\n"
 "您是否要安装升级包?"
 
-#: install_steps_interactive.pm:824
+#: install_steps_interactive.pm:828
 #, c-format
 msgid ""
 "Contacting Mandriva Linux web site to get the list of available mirrors..."
 msgstr "正在连接 Mandriva Linux 网站获得可用镜像的列表..."
 
-#: install_steps_interactive.pm:843
+#: install_steps_interactive.pm:847
 #, c-format
 msgid "Contacting the mirror to get the list of available packages..."
 msgstr "正在连接镜像网站以取得可供安装的软件包的列表..."
 
-#: install_steps_interactive.pm:847
+#: install_steps_interactive.pm:851
 #, c-format
 msgid "Unable to contact mirror %s"
 msgstr "无法连接镜像 %s"
 
-#: install_steps_interactive.pm:847
+#: install_steps_interactive.pm:851
 #, c-format
 msgid "Would you like to try again?"
 msgstr "您是否想要再试一次?"
 
-#: install_steps_interactive.pm:874 standalone/drakclock:45
+#: install_steps_interactive.pm:878 standalone/drakclock:45
 #, c-format
 msgid "Which is your timezone?"
 msgstr "您所在的时区?"
 
-#: install_steps_interactive.pm:879
+#: install_steps_interactive.pm:883
 #, c-format
 msgid "Automatic time synchronization (using NTP)"
 msgstr "自动时间同步(使用 NTP)"
 
-#: install_steps_interactive.pm:887
+#: install_steps_interactive.pm:891
 #, c-format
 msgid "NTP Server"
 msgstr "NTP 服务器"
 
-#: install_steps_interactive.pm:942 install_steps_interactive.pm:950
-#: install_steps_interactive.pm:968 install_steps_interactive.pm:975
-#: install_steps_interactive.pm:1126 services.pm:133
+#: install_steps_interactive.pm:946 install_steps_interactive.pm:954
+#: install_steps_interactive.pm:972 install_steps_interactive.pm:979
+#: install_steps_interactive.pm:1130 services.pm:133
 #: standalone/drakbackup:1576
 #, c-format
 msgid "System"
 msgstr "系统"
 
-#: install_steps_interactive.pm:982 install_steps_interactive.pm:1009
-#: install_steps_interactive.pm:1026 install_steps_interactive.pm:1042
-#: install_steps_interactive.pm:1053
+#: install_steps_interactive.pm:986 install_steps_interactive.pm:1013
+#: install_steps_interactive.pm:1030 install_steps_interactive.pm:1046
+#: install_steps_interactive.pm:1057
 #, c-format
 msgid "Hardware"
 msgstr "硬件"
 
-#: install_steps_interactive.pm:988 install_steps_interactive.pm:997
+#: install_steps_interactive.pm:992 install_steps_interactive.pm:1001
 #, c-format
 msgid "Remote CUPS server"
 msgstr "远程 CUPS 服务器"
 
-#: install_steps_interactive.pm:988
+#: install_steps_interactive.pm:992
 #, c-format
 msgid "No printer"
 msgstr "没有打印机"
 
-#: install_steps_interactive.pm:1030
+#: install_steps_interactive.pm:1034
 #, c-format
 msgid "Do you have an ISA sound card?"
 msgstr "您有 ISA 声卡吗?"
 
-#: install_steps_interactive.pm:1032
+#: install_steps_interactive.pm:1036
 #, c-format
 msgid ""
 "Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound "
 "card"
 msgstr "安装之后运行“alsaconf”或“sndconfig”来配置您的声卡"
 
-#: install_steps_interactive.pm:1034
+#: install_steps_interactive.pm:1038
 #, c-format
 msgid "No sound card detected. Try \"harddrake\" after installation"
 msgstr "没有检测到声卡。请在安装之后尝试“Drak 硬件配置”。"
 
-#: install_steps_interactive.pm:1054
+#: install_steps_interactive.pm:1058
 #, c-format
 msgid "Graphical interface"
 msgstr "图形界面"
 
-#: install_steps_interactive.pm:1060 install_steps_interactive.pm:1072
+#: install_steps_interactive.pm:1064 install_steps_interactive.pm:1076
 #, c-format
 msgid "Network & Internet"
 msgstr "网络和 Internet"
 
-#: install_steps_interactive.pm:1074
+#: install_steps_interactive.pm:1078
 #, c-format
 msgid "configured"
 msgstr "已配置"
 
-#: install_steps_interactive.pm:1083 install_steps_interactive.pm:1097
+#: install_steps_interactive.pm:1087 install_steps_interactive.pm:1101
 #: security/level.pm:55 steps.pm:20
 #, c-format
 msgid "Security"
 msgstr "安全"
 
-#: install_steps_interactive.pm:1102
+#: install_steps_interactive.pm:1106
 #, c-format
 msgid "activated"
 msgstr "已激活"
 
-#: install_steps_interactive.pm:1102
+#: install_steps_interactive.pm:1106
 #, c-format
 msgid "disabled"
 msgstr "已禁用"
 
-#: install_steps_interactive.pm:1113
+#: install_steps_interactive.pm:1117
 #, c-format
 msgid "Boot"
 msgstr "启动"
 
 #. -PO: example: lilo-graphic on /dev/hda1
-#: install_steps_interactive.pm:1117 printer/printerdrake.pm:974
+#: install_steps_interactive.pm:1121 printer/printerdrake.pm:974
 #, c-format
 msgid "%s on %s"
 msgstr "位于 %2$s 上的 %1$s"
 
-#: install_steps_interactive.pm:1131 services.pm:175
+#: install_steps_interactive.pm:1135 services.pm:175
 #, c-format
 msgid "Services: %d activated for %d registered"
 msgstr "服务: %2$d 项已注册, %1$d 项已激活"
 
-#: install_steps_interactive.pm:1143
+#: install_steps_interactive.pm:1147
 #, c-format
 msgid "You have not configured X. Are you sure you really want this?"
 msgstr "您还没有配置过 X。您真的想要这样吗?"
 
-#: install_steps_interactive.pm:1224
+#: install_steps_interactive.pm:1228
 #, c-format
 msgid "Preparing bootloader..."
 msgstr "正在准备引导程序..."
 
-#: install_steps_interactive.pm:1234
+#: install_steps_interactive.pm:1238
 #, c-format
 msgid ""
 "You appear to have an OldWorld or Unknown machine, the yaboot bootloader "
@@ -7164,12 +7159,12 @@ msgstr ""
 "续, 不过您需要使用 BootX 或其它方式启动您的机器。根文件系统的内核参数是："
 "root=%s"
 
-#: install_steps_interactive.pm:1240
+#: install_steps_interactive.pm:1244
 #, c-format
 msgid "Do you want to use aboot?"
 msgstr "您要使用 aboot 吗?"
 
-#: install_steps_interactive.pm:1243
+#: install_steps_interactive.pm:1247
 #, c-format
 msgid ""
 "Error installing aboot, \n"
@@ -7178,29 +7173,29 @@ msgstr ""
 "安装 aboot 时出错, \n"
 "强迫安装会毁坏第一个分区, 要继续吗?"
 
-#: install_steps_interactive.pm:1260
+#: install_steps_interactive.pm:1264
 #, c-format
 msgid ""
 "In this security level, access to the files in the Windows partition is "
 "restricted to the administrator."
 msgstr "在此安全级别中, 只有管理员才能访问 Windows 分区中的文件。"
 
-#: install_steps_interactive.pm:1289 standalone/drakautoinst:76
+#: install_steps_interactive.pm:1293 standalone/drakautoinst:76
 #, c-format
 msgid "Insert a blank floppy in drive %s"
 msgstr "请在驱动器 %s 中插入一张空白软盘"
 
-#: install_steps_interactive.pm:1294
+#: install_steps_interactive.pm:1298
 #, c-format
 msgid "Please insert another floppy for drivers disk"
 msgstr "请插入另外一张软盘, 作为驱动程序盘"
 
-#: install_steps_interactive.pm:1296
+#: install_steps_interactive.pm:1300
 #, c-format
 msgid "Creating auto install floppy..."
 msgstr "正在创建自动安装软盘..."
 
-#: install_steps_interactive.pm:1308
+#: install_steps_interactive.pm:1312
 #, c-format
 msgid ""
 "Some steps are not completed.\n"
@@ -7211,19 +7206,19 @@ msgstr ""
 "\n"
 "您真的要现在退出吗?"
 
-#: install_steps_interactive.pm:1318 standalone/draksambashare:416
+#: install_steps_interactive.pm:1322 standalone/draksambashare:416
 #: standalone/draksambashare:523 standalone/drakups:120 standalone/drakups:159
-#: standalone/logdrake:449 standalone/logdrake:455
+#: standalone/logdrake:452 standalone/logdrake:458
 #, c-format
 msgid "Congratulations"
 msgstr "恭喜"
 
-#: install_steps_interactive.pm:1326 install_steps_interactive.pm:1327
+#: install_steps_interactive.pm:1330 install_steps_interactive.pm:1331
 #, c-format
 msgid "Generate auto install floppy"
 msgstr "生成自动安装软盘"
 
-#: install_steps_interactive.pm:1328
+#: install_steps_interactive.pm:1332
 #, c-format
 msgid ""
 "The auto install can be fully automated if wanted,\n"
@@ -7285,7 +7280,7 @@ msgstr "删除"
 msgid "Basic"
 msgstr "基本"
 
-#: interactive.pm:436 interactive/newt.pm:321 ugtk2.pm:510
+#: interactive.pm:436 interactive/newt.pm:321 ugtk2.pm:490
 #, c-format
 msgid "Finish"
 msgstr "完成"
@@ -7603,13 +7598,6 @@ msgid ""
 "Dvorak (US)"
 msgstr "Dvorak(美国)"
 
-#: keyboard.pm:213
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Esperanto)"
-msgstr "Dvorak(世界语)"
-
 #: keyboard.pm:215
 #, c-format
 msgid ""
@@ -7820,13 +7808,6 @@ msgid ""
 "Laotian"
 msgstr "老挝"
 
-#: keyboard.pm:259
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian AZERTY (old)"
-msgstr "立陶宛 AZERTY(老式)"
-
 #: keyboard.pm:261
 #, c-format
 msgid ""
@@ -7841,13 +7822,6 @@ msgid ""
 "Lithuanian \"number row\" QWERTY"
 msgstr "立陶宛“顺排”QWERTY"
 
-#: keyboard.pm:263
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian \"phonetic\" QWERTY"
-msgstr "立陶宛“同音”QWERTY"
-
 #: keyboard.pm:264
 #, c-format
 msgid ""
@@ -9315,7 +9289,7 @@ msgstr "赞比亚"
 msgid "Zimbabwe"
 msgstr "津巴布韦"
 
-#: lang.pm:1122
+#: lang.pm:1141
 #, c-format
 msgid "Welcome to %s"
 msgstr "欢迎使用 %s"
@@ -9529,10 +9503,10 @@ msgid "GlidePoint"
 msgstr "GlidePoint"
 
 #: mouse.pm:36 network/modem.pm:47 network/modem.pm:48 network/modem.pm:49
-#: network/modem.pm:68 network/modem.pm:82 network/modem.pm:87
-#: network/modem.pm:120 network/netconnect.pm:575 network/netconnect.pm:580
-#: network/netconnect.pm:592 network/netconnect.pm:597
-#: network/netconnect.pm:613 network/netconnect.pm:615
+#: network/modem.pm:68 network/modem.pm:81 network/modem.pm:86
+#: network/modem.pm:115 network/netconnect.pm:580 network/netconnect.pm:585
+#: network/netconnect.pm:597 network/netconnect.pm:602
+#: network/netconnect.pm:618 network/netconnect.pm:620
 #, c-format
 msgid "Automatic"
 msgstr "自动"
@@ -9841,9 +9815,9 @@ msgid "Other ports"
 msgstr "其它端口"
 
 #: network/drakfirewall.pm:251 network/drakfirewall.pm:254
-#: standalone/drakids:33 standalone/drakids:134 standalone/drakids:160
-#: standalone/drakids:169 standalone/drakids:179 standalone/drakids:246
-#: standalone/net_applet:59 standalone/net_applet:180
+#: standalone/drakids:33 standalone/drakids:136 standalone/drakids:145
+#: standalone/drakids:170 standalone/drakids:179 standalone/drakids:189
+#: standalone/drakids:265 standalone/net_applet:59 standalone/net_applet:180
 #: standalone/net_applet:354 standalone/net_applet:391
 #, c-format
 msgid "Interactive Firewall"
@@ -9904,36 +9878,36 @@ msgstr "%s 正在尝试密码破解攻击。"
 msgid "A \"%s\" attack has been attempted by %s"
 msgstr "%s 试图进行“%s”攻击"
 
-#: network/isdn.pm:117 network/netconnect.pm:447 network/netconnect.pm:536
-#: network/netconnect.pm:539 network/netconnect.pm:682
-#: network/netconnect.pm:686
+#: network/isdn.pm:117 network/netconnect.pm:452 network/netconnect.pm:541
+#: network/netconnect.pm:544 network/netconnect.pm:687
+#: network/netconnect.pm:691
 #, c-format
 msgid "Unlisted - edit manually"
 msgstr "未列出 - 手动编辑"
 
-#: network/isdn.pm:160 network/netconnect.pm:379
+#: network/isdn.pm:160 network/netconnect.pm:384
 #, c-format
 msgid "ISA / PCMCIA"
 msgstr "ISA / PCMCIA"
 
-#: network/isdn.pm:160 network/netconnect.pm:379
+#: network/isdn.pm:160 network/netconnect.pm:384
 #, c-format
 msgid "I do not know"
 msgstr "我不知道"
 
-#: network/isdn.pm:161 network/netconnect.pm:379
+#: network/isdn.pm:161 network/netconnect.pm:384
 #, c-format
 msgid "PCI"
 msgstr "PCI"
 
-#: network/isdn.pm:162 network/netconnect.pm:379
+#: network/isdn.pm:162 network/netconnect.pm:384
 #, c-format
 msgid "USB"
 msgstr "USB"
 
 #: network/modem.pm:47 network/modem.pm:48 network/modem.pm:49
-#: network/netconnect.pm:580 network/netconnect.pm:597
-#: network/netconnect.pm:613
+#: network/netconnect.pm:585 network/netconnect.pm:602
+#: network/netconnect.pm:618
 #, c-format
 msgid "Manual"
 msgstr "手动"
@@ -9972,8 +9946,8 @@ msgstr ""
 msgid "Unable to find the ndiswrapper interface!"
 msgstr "找不到 ndiswrapper 接口!"
 
-#: network/netconnect.pm:69 network/netconnect.pm:477
-#: network/netconnect.pm:484
+#: network/netconnect.pm:69 network/netconnect.pm:482
+#: network/netconnect.pm:489
 #, c-format
 msgid "Manual choice"
 msgstr "手动选择"
@@ -10017,291 +9991,298 @@ msgstr ""
 "世界其它地区的协议\n"
 "没有 D-信道(专线)"
 
-#: network/netconnect.pm:115 network/thirdparty.pm:197
+#: network/netconnect.pm:103 standalone/harddrake2:306
+#: standalone/net_monitor:102 standalone/net_monitor:103
+#: standalone/net_monitor:108
+#, c-format
+msgid "unknown"
+msgstr "未知"
+
+#: network/netconnect.pm:120 network/thirdparty.pm:206
 #, c-format
 msgid "Alcatel speedtouch USB modem"
 msgstr "阿尔卡特 Speedtouch USB 调制解调器"
 
-#: network/netconnect.pm:116
+#: network/netconnect.pm:121
 #, c-format
 msgid "Sagem USB modem"
 msgstr "Sagem USB 调制解调器"
 
-#: network/netconnect.pm:117
+#: network/netconnect.pm:122
 #, c-format
 msgid "Bewan modem"
 msgstr "Bewan 调制解调器"
 
-#: network/netconnect.pm:118
+#: network/netconnect.pm:123
 #, c-format
 msgid "ECI Hi-Focus modem"
 msgstr "ECI Hi-Focus 调制解调器"
 
-#: network/netconnect.pm:122
+#: network/netconnect.pm:127
 #, c-format
 msgid "Dynamic Host Configuration Protocol (DHCP)"
 msgstr "动态主机配置协议(DHCP)"
 
-#: network/netconnect.pm:123
+#: network/netconnect.pm:128
 #, c-format
 msgid "Manual TCP/IP configuration"
 msgstr "手工配置 TCP/IP"
 
-#: network/netconnect.pm:124
+#: network/netconnect.pm:129
 #, c-format
 msgid "Point to Point Tunneling Protocol (PPTP)"
 msgstr "点对点隧道协议(PPTP)"
 
-#: network/netconnect.pm:125
+#: network/netconnect.pm:130
 #, c-format
 msgid "PPP over Ethernet (PPPoE)"
 msgstr "以太网上的点对点协议(PPPoE)"
 
-#: network/netconnect.pm:126
+#: network/netconnect.pm:131
 #, c-format
 msgid "PPP over ATM (PPPoA)"
 msgstr "异步传输模式下的点对点协议(PPPoA)"
 
-#: network/netconnect.pm:127
+#: network/netconnect.pm:132
 #, c-format
 msgid "DSL over CAPI"
 msgstr "CAPI 上的 DSL"
 
-#: network/netconnect.pm:131
+#: network/netconnect.pm:136
 #, c-format
 msgid "Bridged Ethernet LLC"
 msgstr "桥接以太网 LLC"
 
-#: network/netconnect.pm:132
+#: network/netconnect.pm:137
 #, c-format
 msgid "Bridged Ethernet VC"
 msgstr "桥接以太网 VC"
 
-#: network/netconnect.pm:133
+#: network/netconnect.pm:138
 #, c-format
 msgid "Routed IP LLC"
 msgstr "路由 IP LLC"
 
-#: network/netconnect.pm:134
+#: network/netconnect.pm:139
 #, c-format
 msgid "Routed IP VC"
 msgstr "路由 IP VC"
 
-#: network/netconnect.pm:135
+#: network/netconnect.pm:140
 #, c-format
 msgid "PPPoA LLC"
 msgstr "PPPoA LLC"
 
-#: network/netconnect.pm:136
+#: network/netconnect.pm:141
 #, c-format
 msgid "PPPoA VC"
 msgstr "PPPoA VC"
 
-#: network/netconnect.pm:140 standalone/drakconnect:498
+#: network/netconnect.pm:145 standalone/drakconnect:498
 #, c-format
 msgid "Script-based"
 msgstr "基于脚本登录"
 
-#: network/netconnect.pm:141 standalone/drakconnect:498
+#: network/netconnect.pm:146 standalone/drakconnect:498
 #, c-format
 msgid "PAP"
 msgstr "PAP"
 
-#: network/netconnect.pm:142 standalone/drakconnect:498
+#: network/netconnect.pm:147 standalone/drakconnect:498
 #, c-format
 msgid "Terminal-based"
 msgstr "基于终端"
 
-#: network/netconnect.pm:143 standalone/drakconnect:498
+#: network/netconnect.pm:148 standalone/drakconnect:498
 #, c-format
 msgid "CHAP"
 msgstr "CHAP"
 
-#: network/netconnect.pm:144 standalone/drakconnect:498
+#: network/netconnect.pm:149 standalone/drakconnect:498
 #, c-format
 msgid "PAP/CHAP"
 msgstr "PAP/CHAP"
 
-#: network/netconnect.pm:234 standalone/drakconnect:56
+#: network/netconnect.pm:239 standalone/drakconnect:56
 #, c-format
 msgid "Network & Internet Configuration"
 msgstr "网络和 Internet 配置"
 
-#: network/netconnect.pm:240
+#: network/netconnect.pm:245
 #, c-format
 msgid "LAN connection"
 msgstr "局域网连接"
 
-#: network/netconnect.pm:241 network/netconnect.pm:260 standalone/drakroam:140
+#: network/netconnect.pm:246 network/netconnect.pm:265 standalone/drakroam:140
 #: standalone/drakroam:158 standalone/drakroam:161
 #, c-format
 msgid "Wireless connection"
 msgstr "无线连接"
 
-#: network/netconnect.pm:242
+#: network/netconnect.pm:247
 #, c-format
 msgid "ADSL connection"
 msgstr "ADSL 连接"
 
-#: network/netconnect.pm:243
+#: network/netconnect.pm:248
 #, c-format
 msgid "Cable connection"
 msgstr "有线电缆连接"
 
-#: network/netconnect.pm:244
+#: network/netconnect.pm:249
 #, c-format
 msgid "ISDN connection"
 msgstr "ISDN 连接"
 
-#: network/netconnect.pm:245
+#: network/netconnect.pm:250
 #, c-format
 msgid "Modem connection"
 msgstr "调制解调器连接"
 
-#: network/netconnect.pm:246
+#: network/netconnect.pm:251
 #, c-format
 msgid "DVB connection"
 msgstr "DVB 连接"
 
-#: network/netconnect.pm:256
+#: network/netconnect.pm:261
 #, c-format
 msgid "Choose the connection you want to configure"
 msgstr "选择您想要配置的连接"
 
-#: network/netconnect.pm:271 network/netconnect.pm:759
+#: network/netconnect.pm:276 network/netconnect.pm:764
 #, c-format
 msgid "Connection Configuration"
 msgstr "连接配置"
 
-#: network/netconnect.pm:271 network/netconnect.pm:760
+#: network/netconnect.pm:276 network/netconnect.pm:765
 #, c-format
 msgid "Please fill or check the field below"
 msgstr "请填写或选择下列项目"
 
-#: network/netconnect.pm:274
+#: network/netconnect.pm:279
 #, c-format
 msgid "Your personal phone number"
 msgstr "您自己的电话号码"
 
-#: network/netconnect.pm:275 network/netconnect.pm:763
+#: network/netconnect.pm:280 network/netconnect.pm:768
 #, c-format
 msgid "Provider name (ex provider.net)"
 msgstr "服务商名称(如 provider.net)"
 
-#: network/netconnect.pm:276 standalone/drakconnect:493
+#: network/netconnect.pm:281 standalone/drakconnect:493
 #, c-format
 msgid "Provider phone number"
 msgstr "服务商电话号码"
 
-#: network/netconnect.pm:277
+#: network/netconnect.pm:282
 #, c-format
 msgid "Provider DNS 1 (optional)"
 msgstr "服务商 DNS 1(可选)"
 
-#: network/netconnect.pm:278
+#: network/netconnect.pm:283
 #, c-format
 msgid "Provider DNS 2 (optional)"
 msgstr "服务商 DNS 2(可选)"
 
-#: network/netconnect.pm:279 standalone/drakconnect:444
+#: network/netconnect.pm:284 standalone/drakconnect:444
 #, c-format
 msgid "Dialing mode"
 msgstr "拨号模式"
 
-#: network/netconnect.pm:280 standalone/drakconnect:449
+#: network/netconnect.pm:285 standalone/drakconnect:449
 #: standalone/drakconnect:517
 #, c-format
 msgid "Connection speed"
 msgstr "连接速率"
 
-#: network/netconnect.pm:281 standalone/drakconnect:454
+#: network/netconnect.pm:286 standalone/drakconnect:454
 #, c-format
 msgid "Connection timeout (in sec)"
 msgstr "连接超时(秒)"
 
-#: network/netconnect.pm:282 network/netconnect.pm:307
-#: network/netconnect.pm:766 standalone/drakconnect:491
+#: network/netconnect.pm:287 network/netconnect.pm:312
+#: network/netconnect.pm:771 standalone/drakconnect:491
 #, c-format
 msgid "Account Login (user name)"
 msgstr "账户登录(用户名)"
 
-#: network/netconnect.pm:283 network/netconnect.pm:308
-#: network/netconnect.pm:767 standalone/drakconnect:492
+#: network/netconnect.pm:288 network/netconnect.pm:313
+#: network/netconnect.pm:772 standalone/drakconnect:492
 #, c-format
 msgid "Account Password"
 msgstr "账户密码"
 
-#: network/netconnect.pm:284 standalone/drakconnect:554
+#: network/netconnect.pm:289 standalone/drakconnect:554
 #, c-format
 msgid "Card IRQ"
 msgstr "网卡的 IRQ"
 
-#: network/netconnect.pm:285 standalone/drakconnect:555
+#: network/netconnect.pm:290 standalone/drakconnect:555
 #, c-format
 msgid "Card mem (DMA)"
 msgstr "网卡内存(DMA)"
 
-#: network/netconnect.pm:286 standalone/drakconnect:556
+#: network/netconnect.pm:291 standalone/drakconnect:556
 #, c-format
 msgid "Card IO"
 msgstr "网卡 IO"
 
-#: network/netconnect.pm:287 standalone/drakconnect:557
+#: network/netconnect.pm:292 standalone/drakconnect:557
 #, c-format
 msgid "Card IO_0"
 msgstr "网卡 IO_0"
 
-#: network/netconnect.pm:288
+#: network/netconnect.pm:293
 #, c-format
 msgid "Card IO_1"
 msgstr "网卡 IO_1"
 
-#: network/netconnect.pm:303
+#: network/netconnect.pm:308
 #, c-format
 msgid "Cable: account options"
 msgstr "光缆: 账户选项"
 
-#: network/netconnect.pm:306
+#: network/netconnect.pm:311
 #, c-format
 msgid "Use BPALogin (needed for Telstra)"
 msgstr "使用 BPALogin (Telstra 需要)"
 
-#: network/netconnect.pm:332 network/netconnect.pm:649
-#: network/netconnect.pm:798 network/netconnect.pm:1112
+#: network/netconnect.pm:337 network/netconnect.pm:654
+#: network/netconnect.pm:804 network/netconnect.pm:1138
 #, c-format
 msgid "Select the network interface to configure:"
 msgstr "选择要配置的网卡: "
 
-#: network/netconnect.pm:334 network/netconnect.pm:369
-#: network/netconnect.pm:650 network/netconnect.pm:800 network/shorewall.pm:65
+#: network/netconnect.pm:339 network/netconnect.pm:374
+#: network/netconnect.pm:655 network/netconnect.pm:806 network/shorewall.pm:65
 #: standalone/drakconnect:713
 #, c-format
 msgid "Net Device"
 msgstr "网络设备"
 
-#: network/netconnect.pm:335 network/netconnect.pm:340
+#: network/netconnect.pm:340 network/netconnect.pm:345
 #, c-format
 msgid "External ISDN modem"
 msgstr "外置 ISDN 调制解调器"
 
-#: network/netconnect.pm:368 standalone/harddrake2:216
+#: network/netconnect.pm:373 standalone/harddrake2:216
 #, c-format
 msgid "Select a device!"
 msgstr "请选择设备！"
 
-#: network/netconnect.pm:377 network/netconnect.pm:387
-#: network/netconnect.pm:397 network/netconnect.pm:430
-#: network/netconnect.pm:444
+#: network/netconnect.pm:382 network/netconnect.pm:392
+#: network/netconnect.pm:402 network/netconnect.pm:435
+#: network/netconnect.pm:449
 #, c-format
 msgid "ISDN Configuration"
 msgstr "ISDN 配置"
 
-#: network/netconnect.pm:378
+#: network/netconnect.pm:383
 #, c-format
 msgid "What kind of card do you have?"
 msgstr "请问您适配卡的种类?"
 
-#: network/netconnect.pm:388
+#: network/netconnect.pm:393
 #, c-format
 msgid ""
 "\n"
@@ -10315,22 +10296,22 @@ msgstr ""
 "\n"
 "如果您的卡是 PCMCIA 卡, 您必须知道它的“irq”和“io”。\n"
 
-#: network/netconnect.pm:392
+#: network/netconnect.pm:397
 #, c-format
 msgid "Continue"
 msgstr "继续"
 
-#: network/netconnect.pm:392
+#: network/netconnect.pm:397
 #, c-format
 msgid "Abort"
 msgstr "中止"
 
-#: network/netconnect.pm:398
+#: network/netconnect.pm:403
 #, c-format
 msgid "Which of the following is your ISDN card?"
 msgstr "下列哪个是您的 ISDN 卡?"
 
-#: network/netconnect.pm:416
+#: network/netconnect.pm:421
 #, c-format
 msgid ""
 "A CAPI driver is available for this modem. This CAPI driver can offer more "
@@ -10340,25 +10321,25 @@ msgstr ""
 "此调制解调器适用 CAPI 驱动程序。此 CAPI 驱动程序比免费驱动程序提供更多的功能"
 "(比如发送传真)。您想要使用哪个驱动程序?"
 
-#: network/netconnect.pm:418 standalone/drakconnect:109 standalone/drakups:251
+#: network/netconnect.pm:423 standalone/drakconnect:109 standalone/drakups:251
 #: standalone/harddrake2:133
 #, c-format
 msgid "Driver"
 msgstr "驱动程序"
 
-#: network/netconnect.pm:430
+#: network/netconnect.pm:435
 #, c-format
 msgid "Which protocol do you want to use?"
 msgstr "您将使用哪种协议?"
 
-#: network/netconnect.pm:432 standalone/drakconnect:109
+#: network/netconnect.pm:437 standalone/drakconnect:109
 #: standalone/drakconnect:300 standalone/drakconnect:562
-#: standalone/drakids:196 standalone/drakvpn:1128
+#: standalone/drakids:207 standalone/drakvpn:1128
 #, c-format
 msgid "Protocol"
 msgstr "协议"
 
-#: network/netconnect.pm:444
+#: network/netconnect.pm:449
 #, c-format
 msgid ""
 "Select your provider.\n"
@@ -10367,13 +10348,13 @@ msgstr ""
 "选择您的提供商。\n"
 "如果该提供商未被列出, 请选择“未列出”。"
 
-#: network/netconnect.pm:446 network/netconnect.pm:535
-#: network/netconnect.pm:681
+#: network/netconnect.pm:451 network/netconnect.pm:540
+#: network/netconnect.pm:686
 #, c-format
 msgid "Provider:"
 msgstr "服务商:"
 
-#: network/netconnect.pm:455
+#: network/netconnect.pm:460
 #, c-format
 msgid ""
 "Your modem is not supported by the system.\n"
@@ -10382,52 +10363,52 @@ msgstr ""
 "您的调制解调器不被系统支持。\n"
 "请看看 http://www.linmodems.org"
 
-#: network/netconnect.pm:474
+#: network/netconnect.pm:479
 #, c-format
 msgid "Select the modem to configure:"
 msgstr "选择要配置的调制解调器:"
 
-#: network/netconnect.pm:504
+#: network/netconnect.pm:509
 #, c-format
 msgid "Please choose which serial port your modem is connected to."
 msgstr "请选择您的调制解调器是连接到哪个串行端口。"
 
-#: network/netconnect.pm:533
+#: network/netconnect.pm:538
 #, c-format
 msgid "Select your provider:"
 msgstr "选择您的服务商:"
 
-#: network/netconnect.pm:557
+#: network/netconnect.pm:562
 #, c-format
 msgid "Dialup: account options"
 msgstr "拨号: 账户设置"
 
-#: network/netconnect.pm:560
+#: network/netconnect.pm:565
 #, c-format
 msgid "Connection name"
 msgstr "连接名称"
 
-#: network/netconnect.pm:561
+#: network/netconnect.pm:566
 #, c-format
 msgid "Phone number"
 msgstr "电话号码"
 
-#: network/netconnect.pm:562
+#: network/netconnect.pm:567
 #, c-format
 msgid "Login ID"
 msgstr "登录 ID"
 
-#: network/netconnect.pm:577 network/netconnect.pm:610
+#: network/netconnect.pm:582 network/netconnect.pm:615
 #, c-format
 msgid "Dialup: IP parameters"
 msgstr "拨号: IP 参数"
 
-#: network/netconnect.pm:580
+#: network/netconnect.pm:585
 #, c-format
 msgid "IP parameters"
 msgstr "IP 参数"
 
-#: network/netconnect.pm:581 network/netconnect.pm:884
+#: network/netconnect.pm:586 network/netconnect.pm:909
 #: printer/printerdrake.pm:460 standalone/drakconnect:109
 #: standalone/drakconnect:316 standalone/drakconnect:882
 #: standalone/drakhosts:197 standalone/drakroam:114 standalone/drakups:286
@@ -10435,64 +10416,64 @@ msgstr "IP 参数"
 msgid "IP address"
 msgstr "IP 地址"
 
-#: network/netconnect.pm:582
+#: network/netconnect.pm:587
 #, c-format
 msgid "Subnet mask"
 msgstr "子网掩码"
 
-#: network/netconnect.pm:594
+#: network/netconnect.pm:599
 #, c-format
 msgid "Dialup: DNS parameters"
 msgstr "拨号: DNS 参数"
 
-#: network/netconnect.pm:597
+#: network/netconnect.pm:602
 #, c-format
 msgid "DNS"
 msgstr "DNS"
 
-#: network/netconnect.pm:598
+#: network/netconnect.pm:603
 #, c-format
 msgid "Domain name"
 msgstr "域名"
 
-#: network/netconnect.pm:599 network/netconnect.pm:764
+#: network/netconnect.pm:604 network/netconnect.pm:769
 #: standalone/drakconnect:992
 #, c-format
 msgid "First DNS Server (optional)"
 msgstr "首选 DNS 服务器(可选)"
 
-#: network/netconnect.pm:600 network/netconnect.pm:765
+#: network/netconnect.pm:605 network/netconnect.pm:770
 #: standalone/drakconnect:993
 #, c-format
 msgid "Second DNS Server (optional)"
 msgstr "备选 DNS 服务器(可选)"
 
-#: network/netconnect.pm:601
+#: network/netconnect.pm:606
 #, c-format
 msgid "Set hostname from IP"
 msgstr "由 IP 设置主机名"
 
-#: network/netconnect.pm:613 standalone/drakconnect:327
+#: network/netconnect.pm:618 standalone/drakconnect:327
 #, c-format
 msgid "Gateway"
 msgstr "网关"
 
-#: network/netconnect.pm:614 standalone/drakroam:116
+#: network/netconnect.pm:619 standalone/drakroam:116
 #, c-format
 msgid "Gateway IP address"
 msgstr "网关 IP 地址"
 
-#: network/netconnect.pm:649
+#: network/netconnect.pm:654
 #, c-format
 msgid "ADSL configuration"
 msgstr "ADSL 配置"
 
-#: network/netconnect.pm:679
+#: network/netconnect.pm:684
 #, c-format
 msgid "Please choose your ADSL provider"
 msgstr "请选择您的 ADSL 提供商"
 
-#: network/netconnect.pm:709
+#: network/netconnect.pm:714
 #, c-format
 msgid ""
 "Please choose your DSL connection type.\n"
@@ -10501,54 +10482,54 @@ msgstr ""
 "请选择您的 DSL 连接类型。\n"
 "如果您不知道的话，请保留预先选择的类型。"
 
-#: network/netconnect.pm:712
+#: network/netconnect.pm:717
 #, c-format
 msgid "ADSL connection type:"
 msgstr "ADSL 连接类型:"
 
-#: network/netconnect.pm:769
+#: network/netconnect.pm:774
 #, c-format
 msgid "Virtual Path ID (VPI):"
 msgstr "虚拟路径 ID (VPI):"
 
-#: network/netconnect.pm:770
+#: network/netconnect.pm:775
 #, c-format
 msgid "Virtual Circuit ID (VCI):"
 msgstr "虚拟电路 ID (VCI):"
 
-#: network/netconnect.pm:773
+#: network/netconnect.pm:778
 #, c-format
 msgid "Encapsulation:"
 msgstr "封装: "
 
-#: network/netconnect.pm:800
+#: network/netconnect.pm:808
 #, c-format
 msgid "Manually load a driver"
 msgstr "手动装入驱动程序"
 
-#: network/netconnect.pm:800
+#: network/netconnect.pm:809
 #, c-format
 msgid "Use a Windows driver (with ndiswrapper)"
 msgstr "使用 Windows 驱动程序(通过 ndiswrapper)"
 
-#: network/netconnect.pm:840
+#: network/netconnect.pm:865
 #, c-format
 msgid "Zeroconf hostname resolution"
 msgstr "Zeroconf 主机名解析"
 
-#: network/netconnect.pm:841 network/netconnect.pm:871
+#: network/netconnect.pm:866 network/netconnect.pm:896
 #, c-format
 msgid "Configuring network device %s (driver %s)"
 msgstr "配置网络设备 %s(驱动程序 %s)"
 
-#: network/netconnect.pm:842
+#: network/netconnect.pm:867
 #, c-format
 msgid ""
 "The following protocols can be used to configure a LAN connection. Please "
 "choose the one you want to use"
 msgstr "您可使用下列协议配置局域网连接。请选择您想要使用的协议"
 
-#: network/netconnect.pm:872
+#: network/netconnect.pm:897
 #, c-format
 msgid ""
 "Please enter the IP configuration for this machine.\n"
@@ -10559,197 +10540,197 @@ msgstr ""
 "下列项目要求以句点分隔十进制格式输入的 IP 地址。\n"
 "(例如, 1.2.3.4)"
 
-#: network/netconnect.pm:879 standalone/drakconnect:373
+#: network/netconnect.pm:904 standalone/drakconnect:373
 #, c-format
 msgid "Assign host name from DHCP address"
 msgstr "从 DHCP 地址指定主机名"
 
-#: network/netconnect.pm:880 standalone/drakconnect:375
+#: network/netconnect.pm:905 standalone/drakconnect:375
 #, c-format
 msgid "DHCP host name"
 msgstr "DHCP 主机名"
 
-#: network/netconnect.pm:885 standalone/drakconnect:321
+#: network/netconnect.pm:910 standalone/drakconnect:321
 #: standalone/drakconnect:883 standalone/drakgw:181
 #, c-format
 msgid "Netmask"
 msgstr "子网掩码"
 
-#: network/netconnect.pm:887 standalone/drakconnect:437
+#: network/netconnect.pm:912 standalone/drakconnect:437
 #, c-format
 msgid "Track network card id (useful for laptops)"
 msgstr "跟踪网卡标志(用于笔记本电脑)"
 
-#: network/netconnect.pm:888 standalone/drakconnect:438
+#: network/netconnect.pm:913 standalone/drakconnect:438
 #, c-format
 msgid "Network Hotplugging"
 msgstr "网络热插拔"
 
-#: network/netconnect.pm:890 standalone/drakconnect:432
+#: network/netconnect.pm:915 standalone/drakconnect:432
 #, c-format
 msgid "Start at boot"
 msgstr "开机时启动"
 
-#: network/netconnect.pm:892 standalone/drakconnect:460
+#: network/netconnect.pm:917 standalone/drakconnect:460
 #, c-format
 msgid "Metric"
 msgstr "度量衡"
 
-#: network/netconnect.pm:893
+#: network/netconnect.pm:918
 #, c-format
 msgid "Enable IPv6 to IPv4 tunnel"
 msgstr "启用 IPv6 到 IPv4 的隧道"
 
-#: network/netconnect.pm:895 standalone/drakconnect:369
+#: network/netconnect.pm:920 standalone/drakconnect:369
 #: standalone/drakconnect:886
 #, c-format
 msgid "DHCP client"
 msgstr "DHCP 客户端"
 
-#: network/netconnect.pm:897 standalone/drakconnect:379
+#: network/netconnect.pm:922 standalone/drakconnect:379
 #, c-format
 msgid "DHCP timeout (in seconds)"
 msgstr "DHCP 超时(秒)"
 
-#: network/netconnect.pm:898 standalone/drakconnect:382
+#: network/netconnect.pm:923 standalone/drakconnect:382
 #, c-format
 msgid "Get DNS servers from DHCP"
 msgstr "从 DHCP 获取 DNS 服务器"
 
-#: network/netconnect.pm:899 standalone/drakconnect:383
+#: network/netconnect.pm:924 standalone/drakconnect:383
 #, c-format
 msgid "Get YP servers from DHCP"
 msgstr "从 DHCP 获取 YP 服务器"
 
-#: network/netconnect.pm:900 standalone/drakconnect:384
+#: network/netconnect.pm:925 standalone/drakconnect:384
 #, c-format
 msgid "Get NTPD servers from DHCP"
 msgstr "从 DHCP 获取 NTPD 服务器"
 
-#: network/netconnect.pm:908 printer/printerdrake.pm:1897
+#: network/netconnect.pm:933 printer/printerdrake.pm:1897
 #: standalone/drakconnect:676
 #, c-format
 msgid "IP address should be in format 1.2.3.4"
 msgstr "IP 地址的格式应该是 1.2.3.4"
 
-#: network/netconnect.pm:912 standalone/drakconnect:680
+#: network/netconnect.pm:937 standalone/drakconnect:680
 #, c-format
 msgid "Netmask should be in format 255.255.224.0"
 msgstr "子网掩码的格式应该是 255.255.224.0"
 
-#: network/netconnect.pm:916
+#: network/netconnect.pm:941
 #, c-format
 msgid "Warning: IP address %s is usually reserved!"
 msgstr "警告: IP 地址 %s 通常是被保留的！"
 
-#: network/netconnect.pm:921 standalone/drakTermServ:1852
+#: network/netconnect.pm:946 standalone/drakTermServ:1852
 #: standalone/drakTermServ:1853 standalone/drakTermServ:1854
 #, c-format
 msgid "%s already in use\n"
 msgstr "%s 已经被使用了\n"
 
-#: network/netconnect.pm:961
+#: network/netconnect.pm:986
 #, c-format
 msgid "Choose an ndiswrapper driver"
 msgstr "选择 ndiswrapper 驱动程序"
 
-#: network/netconnect.pm:963
+#: network/netconnect.pm:988
 #, c-format
 msgid "Use the ndiswrapper driver %s"
 msgstr "使用 ndiswrapper 驱动程序 %s"
 
-#: network/netconnect.pm:963
+#: network/netconnect.pm:988
 #, c-format
 msgid "Install a new driver"
 msgstr "安装新驱动程序"
 
-#: network/netconnect.pm:975
+#: network/netconnect.pm:1000
 #, c-format
 msgid "Select a device:"
 msgstr "选择设备:"
 
-#: network/netconnect.pm:1004
+#: network/netconnect.pm:1029
 #, c-format
 msgid "Please enter the wireless parameters for this card:"
 msgstr "请选择此网卡的无线参数:"
 
-#: network/netconnect.pm:1007 standalone/drakconnect:404
+#: network/netconnect.pm:1032 standalone/drakconnect:404
 #, c-format
 msgid "Operating Mode"
 msgstr "操作模式"
 
-#: network/netconnect.pm:1008
+#: network/netconnect.pm:1033
 #, c-format
 msgid "Ad-hoc"
 msgstr "Ad-hoc"
 
-#: network/netconnect.pm:1008
+#: network/netconnect.pm:1033
 #, c-format
 msgid "Managed"
 msgstr "受控的"
 
-#: network/netconnect.pm:1008
+#: network/netconnect.pm:1033
 #, c-format
 msgid "Master"
 msgstr "主要的"
 
-#: network/netconnect.pm:1008
+#: network/netconnect.pm:1033
 #, c-format
 msgid "Repeater"
 msgstr "转发器"
 
-#: network/netconnect.pm:1008
+#: network/netconnect.pm:1033
 #, c-format
 msgid "Secondary"
 msgstr "次要的"
 
-#: network/netconnect.pm:1008
+#: network/netconnect.pm:1033
 #, c-format
 msgid "Auto"
 msgstr "自动"
 
-#: network/netconnect.pm:1011 standalone/drakconnect:405
+#: network/netconnect.pm:1036 standalone/drakconnect:405
 #: standalone/drakroam:107
 #, c-format
 msgid "Network name (ESSID)"
 msgstr "网络名称(ESSID)"
 
-#: network/netconnect.pm:1012 standalone/drakroam:108
+#: network/netconnect.pm:1037 standalone/drakroam:108
 #, c-format
 msgid "Encryption mode"
 msgstr "加密模式"
 
-#: network/netconnect.pm:1017
+#: network/netconnect.pm:1042
 #, c-format
 msgid "Allow access point roaming"
 msgstr "允许访问点漫游"
 
-#: network/netconnect.pm:1018 standalone/drakconnect:406
+#: network/netconnect.pm:1044 standalone/drakconnect:406
 #, c-format
 msgid "Network ID"
 msgstr "网络 ID"
 
-#: network/netconnect.pm:1019 standalone/drakconnect:407
+#: network/netconnect.pm:1045 standalone/drakconnect:407
 #, c-format
 msgid "Operating frequency"
 msgstr "运行频率"
 
-#: network/netconnect.pm:1020 standalone/drakconnect:408
+#: network/netconnect.pm:1046 standalone/drakconnect:408
 #, c-format
 msgid "Sensitivity threshold"
 msgstr "灵敏度阀值"
 
-#: network/netconnect.pm:1021 standalone/drakconnect:409
+#: network/netconnect.pm:1047 standalone/drakconnect:409
 #, c-format
 msgid "Bitrate (in b/s)"
 msgstr "比特率(每秒比特数, b/s)"
 
-#: network/netconnect.pm:1022 standalone/drakconnect:420
+#: network/netconnect.pm:1048 standalone/drakconnect:420
 #, c-format
 msgid "RTS/CTS"
 msgstr "RTS/CTS"
 
-#: network/netconnect.pm:1023
+#: network/netconnect.pm:1049
 #, c-format
 msgid ""
 "RTS/CTS adds a handshake before each packet transmission to make sure that "
@@ -10768,17 +10749,17 @@ msgstr ""
 "包\n"
 "的大小, 一个等于中止计划的值的大小。您也可以设置这个值为自动、固定或者关闭。"
 
-#: network/netconnect.pm:1030 standalone/drakconnect:421
+#: network/netconnect.pm:1056 standalone/drakconnect:421
 #, c-format
 msgid "Fragmentation"
 msgstr "块"
 
-#: network/netconnect.pm:1031 standalone/drakconnect:422
+#: network/netconnect.pm:1057 standalone/drakconnect:422
 #, c-format
 msgid "iwconfig command extra arguments"
 msgstr "iwconfig 命令的额外参数"
 
-#: network/netconnect.pm:1032
+#: network/netconnect.pm:1058
 #, c-format
 msgid ""
 "Here, one can configure some extra wireless parameters such as:\n"
@@ -10794,12 +10775,12 @@ msgstr ""
 "请参看 iwconfig(8) man page 中的更多信息。"
 
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
-#: network/netconnect.pm:1039 standalone/drakconnect:423
+#: network/netconnect.pm:1065 standalone/drakconnect:423
 #, c-format
 msgid "iwspy command extra arguments"
 msgstr "iwspy 命令的额外参数"
 
-#: network/netconnect.pm:1040
+#: network/netconnect.pm:1066
 #, c-format
 msgid ""
 "iwspy is used to set a list of addresses in a wireless network\n"
@@ -10817,12 +10798,12 @@ msgstr ""
 "\n"
 "请参看 iwpspy(8) man page 中的更多信息。"
 
-#: network/netconnect.pm:1049 standalone/drakconnect:424
+#: network/netconnect.pm:1075 standalone/drakconnect:424
 #, c-format
 msgid "iwpriv command extra arguments"
 msgstr "iwpriv 命令的额外参数"
 
-#: network/netconnect.pm:1050
+#: network/netconnect.pm:1076
 #, c-format
 msgid ""
 "iwpriv enable to set up optionals (private) parameters of a wireless "
@@ -10851,7 +10832,7 @@ msgstr ""
 "\n"
 "请参看 iwpriv(8) man page 中的更多信息。"
 
-#: network/netconnect.pm:1065
+#: network/netconnect.pm:1091
 #, c-format
 msgid ""
 "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
@@ -10860,44 +10841,44 @@ msgstr ""
 "频率应该有后缀 k, M 或 G(如“2.46G”代表 2.46 GHz 频率), 或者后带足够"
 "的“0”(零)。"
 
-#: network/netconnect.pm:1069
+#: network/netconnect.pm:1095
 #, c-format
 msgid ""
 "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
 "enough '0' (zeroes)."
 msgstr "速度应该有后缀 k, M 或 G(如“11M”代表 11M), 或者后带足够的“0”(零)。"
 
-#: network/netconnect.pm:1112
+#: network/netconnect.pm:1138
 #, c-format
 msgid "DVB configuration"
 msgstr "DVB 配置"
 
-#: network/netconnect.pm:1113
+#: network/netconnect.pm:1139
 #, c-format
 msgid "DVB Adapter"
 msgstr "DVB 适配器"
 
-#: network/netconnect.pm:1130
+#: network/netconnect.pm:1156
 #, c-format
 msgid "DVB adapter settings"
 msgstr "DVB 适配器设置"
 
-#: network/netconnect.pm:1133
+#: network/netconnect.pm:1159
 #, c-format
 msgid "Adapter card"
 msgstr "适配卡"
 
-#: network/netconnect.pm:1134
+#: network/netconnect.pm:1160
 #, c-format
 msgid "Net demux"
 msgstr "网络互斥"
 
-#: network/netconnect.pm:1135
+#: network/netconnect.pm:1161
 #, c-format
 msgid "PID"
 msgstr "PID"
 
-#: network/netconnect.pm:1163
+#: network/netconnect.pm:1189
 #, c-format
 msgid ""
 "Please enter your host name.\n"
@@ -10909,67 +10890,67 @@ msgstr ""
 "您的主机名称必需是个完全限定的名称, 例如“mybox.mylab.myco.com”。\n"
 "如果您有网关的话, 也请输入其 IP 地址。"
 
-#: network/netconnect.pm:1168
+#: network/netconnect.pm:1194
 #, c-format
 msgid "Last but not least you can also type in your DNS server IP addresses."
 msgstr "最后, 您还应该至少输入您 DNS 服务器的 IP 地址。"
 
-#: network/netconnect.pm:1170 standalone/drakconnect:991
+#: network/netconnect.pm:1196 standalone/drakconnect:991
 #, c-format
 msgid "Host name (optional)"
 msgstr "主机名(可选)"
 
-#: network/netconnect.pm:1170 standalone/drakhosts:197
+#: network/netconnect.pm:1196 standalone/drakhosts:197
 #, c-format
 msgid "Host name"
 msgstr "主机名"
 
-#: network/netconnect.pm:1172
+#: network/netconnect.pm:1198
 #, c-format
 msgid "DNS server 1"
 msgstr "DNS 服务器 1"
 
-#: network/netconnect.pm:1173
+#: network/netconnect.pm:1199
 #, c-format
 msgid "DNS server 2"
 msgstr "DNS 服务器 2"
 
-#: network/netconnect.pm:1174
+#: network/netconnect.pm:1200
 #, c-format
 msgid "DNS server 3"
 msgstr "DNS 服务器 3"
 
-#: network/netconnect.pm:1175
+#: network/netconnect.pm:1201
 #, c-format
 msgid "Search domain"
 msgstr "搜索网域"
 
-#: network/netconnect.pm:1176
+#: network/netconnect.pm:1202
 #, c-format
 msgid "By default search domain will be set from the fully-qualified host name"
 msgstr "默认情况下, 搜索域名将会根据完全限定的主机名进行设定"
 
-#: network/netconnect.pm:1177
+#: network/netconnect.pm:1203
 #, c-format
 msgid "Gateway (e.g. %s)"
 msgstr "网关(如 %s)"
 
-#: network/netconnect.pm:1179
+#: network/netconnect.pm:1205
 #, c-format
 msgid "Gateway device"
 msgstr "网关设备"
 
-#: network/netconnect.pm:1188
+#: network/netconnect.pm:1214
 #, c-format
 msgid "DNS server address should be in format 1.2.3.4"
 msgstr "DNS 服务器的格式应该是 1.2.3.4"
 
-#: network/netconnect.pm:1193 standalone/drakconnect:685
+#: network/netconnect.pm:1219 standalone/drakconnect:685
 #, c-format
 msgid "Gateway address should be in format 1.2.3.4"
 msgstr "网关地址的格式应该是 1.2.3.4"
 
-#: network/netconnect.pm:1206
+#: network/netconnect.pm:1232
 #, c-format
 msgid ""
 "If desired, enter a Zeroconf hostname.\n"
@@ -10981,67 +10962,67 @@ msgstr ""
 "这将被您的计算机用于通知其未被网络管理的共享资源。\n"
 "大多数网络中不需要此设置。"
 
-#: network/netconnect.pm:1210
+#: network/netconnect.pm:1236
 #, c-format
 msgid "Zeroconf Host name"
 msgstr "Zeroconf 主机名"
 
-#: network/netconnect.pm:1213
+#: network/netconnect.pm:1239
 #, c-format
 msgid "Zeroconf host name must not contain a ."
 msgstr "Zeroconf 主机名不能包含“.”"
 
-#: network/netconnect.pm:1223
+#: network/netconnect.pm:1249
 #, c-format
 msgid "Do you want to allow users to start the connection?"
 msgstr "您是否希望允许用户启动连接?"
 
-#: network/netconnect.pm:1236
+#: network/netconnect.pm:1262
 #, c-format
 msgid "Do you want to start the connection at boot?"
 msgstr "您是否希望一开机就启动连接?"
 
-#: network/netconnect.pm:1251
+#: network/netconnect.pm:1278
 #, c-format
 msgid "Automatically at boot"
 msgstr "开机时自动启动"
 
-#: network/netconnect.pm:1253
+#: network/netconnect.pm:1280
 #, c-format
 msgid "By using Net Applet in the system tray"
 msgstr "使用系统脱盘中的网络小程序"
 
-#: network/netconnect.pm:1255
+#: network/netconnect.pm:1282
 #, c-format
 msgid "Manually (the interface would still be activated at boot)"
 msgstr "手动(启动时仍会激活网卡)"
 
-#: network/netconnect.pm:1264
+#: network/netconnect.pm:1291
 #, c-format
 msgid "How do you want to dial this connection?"
 msgstr "您想要如何拨打此连接?"
 
-#: network/netconnect.pm:1277
+#: network/netconnect.pm:1304
 #, c-format
 msgid "Do you want to try to connect to the Internet now?"
 msgstr "您想要测试连接到 Internet 吗?"
 
-#: network/netconnect.pm:1285 standalone/drakconnect:1023
+#: network/netconnect.pm:1312 standalone/drakconnect:1023
 #, c-format
 msgid "Testing your connection..."
 msgstr "正在测试您的连接..."
 
-#: network/netconnect.pm:1305
+#: network/netconnect.pm:1332
 #, c-format
 msgid "The system is now connected to the Internet."
 msgstr "您的系统现在正连接到 Internet。"
 
-#: network/netconnect.pm:1306
+#: network/netconnect.pm:1333
 #, c-format
 msgid "For security reasons, it will be disconnected now."
 msgstr "由于安全原因, 现在将断开连接。"
 
-#: network/netconnect.pm:1307
+#: network/netconnect.pm:1334
 #, c-format
 msgid ""
 "The system does not seem to be connected to the Internet.\n"
@@ -11050,7 +11031,7 @@ msgstr ""
 "看来系统没有连接到 Internet。\n"
 "请重新尝试配置您的连接。"
 
-#: network/netconnect.pm:1322
+#: network/netconnect.pm:1349
 #, c-format
 msgid ""
 "Congratulations, the network and Internet configuration is finished.\n"
@@ -11059,14 +11040,14 @@ msgstr ""
 "恭喜, 网络和 Internet 配置完成。\n"
 "\n"
 
-#: network/netconnect.pm:1325
+#: network/netconnect.pm:1352
 #, c-format
 msgid ""
 "After this is done, we recommend that you restart your X environment to "
 "avoid any hostname-related problems."
 msgstr "建议重启动 X 环境以避免任何与主机名有关的问题。"
 
-#: network/netconnect.pm:1326
+#: network/netconnect.pm:1353
 #, c-format
 msgid ""
 "Problems occurred during configuration.\n"
@@ -11077,28 +11058,28 @@ msgstr ""
 "请从网络监视器或者控制中心测试您的连接。如果您的连接不工作, 您可能想要重新配"
 "置。"
 
-#: network/netconnect.pm:1337
+#: network/netconnect.pm:1364
 #, c-format
 msgid "(detected on port %s)"
 msgstr "(在端口 %s 检测到)"
 
 #. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
-#: network/netconnect.pm:1339
+#: network/netconnect.pm:1366
 #, c-format
 msgid "(detected %s)"
 msgstr "(检测到 %s)"
 
-#: network/netconnect.pm:1339
+#: network/netconnect.pm:1366
 #, c-format
 msgid "(detected)"
 msgstr "(检测到)"
 
-#: network/netconnect.pm:1340
+#: network/netconnect.pm:1367
 #, c-format
 msgid "Network Configuration"
 msgstr "网络配置"
 
-#: network/netconnect.pm:1341
+#: network/netconnect.pm:1368
 #, c-format
 msgid ""
 "Because you are doing a network installation, your network is already "
@@ -11109,12 +11090,12 @@ msgstr ""
 "由于您正在执行网络安装, 您的网络已经配置好了。\n"
 "单击“确定”保存配置, 或“取消”重新配置网络。\n"
 
-#: network/netconnect.pm:1344
+#: network/netconnect.pm:1371
 #, c-format
 msgid "The network needs to be restarted. Do you want to restart it?"
 msgstr "网络需要重新启动。您要重新启动吗?"
 
-#: network/netconnect.pm:1345
+#: network/netconnect.pm:1372
 #, c-format
 msgid ""
 "A problem occurred while restarting the network: \n"
@@ -11125,7 +11106,7 @@ msgstr ""
 "\n"
 "%s"
 
-#: network/netconnect.pm:1346
+#: network/netconnect.pm:1373
 #, c-format
 msgid ""
 "We are now going to configure the %s connection.\n"
@@ -11138,12 +11119,12 @@ msgstr ""
 "\n"
 "按“%s”继续。"
 
-#: network/netconnect.pm:1347
+#: network/netconnect.pm:1374
 #, c-format
 msgid "Configuration is complete, do you want to apply settings?"
 msgstr "配置完成, 您想要应用设置吗?"
 
-#: network/netconnect.pm:1348
+#: network/netconnect.pm:1375
 #, c-format
 msgid ""
 "You have configured multiple ways to connect to the Internet.\n"
@@ -11154,12 +11135,12 @@ msgstr ""
 "选择您要使用的一种。\n"
 "\n"
 
-#: network/netconnect.pm:1349
+#: network/netconnect.pm:1376
 #, c-format
 msgid "Internet connection"
 msgstr "Internet 连接"
 
-#: network/netconnect.pm:1366
+#: network/netconnect.pm:1393
 #, c-format
 msgid ""
 "An unexpected error has happened:\n"
@@ -11168,27 +11149,27 @@ msgstr ""
 "发生了意外错误: \n"
 "%s"
 
-#: network/network.pm:401 network/network.pm:402
+#: network/network.pm:403 network/network.pm:404
 #, c-format
 msgid "Proxies configuration"
 msgstr "代理服务器配置"
 
-#: network/network.pm:403
+#: network/network.pm:405
 #, c-format
 msgid "HTTP proxy"
 msgstr "HTTP 代理服务器"
 
-#: network/network.pm:404
+#: network/network.pm:406
 #, c-format
 msgid "FTP proxy"
 msgstr "FTP 代理服务器"
 
-#: network/network.pm:407
+#: network/network.pm:409
 #, c-format
 msgid "Proxy should be http://..."
 msgstr "代理服务器应该是 http://..."
 
-#: network/network.pm:408
+#: network/network.pm:410
 #, c-format
 msgid "URL should begin with 'ftp:' or 'http:'"
 msgstr "URL 应该是以“ftp:”或“http:”开头"
@@ -11210,12 +11191,12 @@ msgstr ""
 "\t\teth0 或 eth1 代表有线电视连接, \n"
 "\t\tippp+ 代表 ISDN 连接。\n"
 
-#: network/thirdparty.pm:209
+#: network/thirdparty.pm:218
 #, c-format
 msgid "Copy the Alcatel microcode as mgmt.o in /usr/share/speedtouch/"
 msgstr "将阿尔卡特微码复制到 /usr/share/speedtouch 并保存为 mgmt.o"
 
-#: network/thirdparty.pm:218
+#: network/thirdparty.pm:227
 #, c-format
 msgid ""
 "The ECI Hi-Focus modem cannot be supported due to binary driver distribution "
@@ -11227,24 +11208,24 @@ msgstr ""
 "\n"
 "您可以在此网站: http://eciadsl.flashtux.org/ 找到驱动程序。"
 
-#: network/thirdparty.pm:291
+#: network/thirdparty.pm:306
 #, c-format
 msgid "Could not install the packages (%s)!"
 msgstr "无法安装软件包(%s)!"
 
-#: network/thirdparty.pm:299
+#: network/thirdparty.pm:314
 #, c-format
 msgid "Some packages (%s) are required but aren't available."
 msgstr "需要某些软件包(%s)，这些软件包不可用。"
 
-#: network/thirdparty.pm:300
+#: network/thirdparty.pm:315
 #, c-format
 msgid ""
 "These packages can be found in Mandriva Club or in Mandriva commercial "
 "releases."
 msgstr "这些软件包可以在 Mandriva Club 或 Mandriva Linux 零售产品中找到。"
 
-#: network/thirdparty.pm:301
+#: network/thirdparty.pm:317
 #, c-format
 msgid ""
 "The required files can also be installed from this URL:\n"
@@ -11253,22 +11234,22 @@ msgstr ""
 "所需的文件也可从以下 URL 安装:\n"
 "%s"
 
-#: network/thirdparty.pm:334
+#: network/thirdparty.pm:357
 #, c-format
 msgid "Unable to find \"%s\" on your Windows system!"
 msgstr "在 Windows 系统中找不到“%s”!"
 
-#: network/thirdparty.pm:336
+#: network/thirdparty.pm:359
 #, c-format
 msgid "No Windows system has been detected!"
 msgstr "未检测到 Windows 系统!"
 
-#: network/thirdparty.pm:346
+#: network/thirdparty.pm:369
 #, c-format
 msgid "Insert floppy"
 msgstr "插入软盘"
 
-#: network/thirdparty.pm:347
+#: network/thirdparty.pm:370
 #, c-format
 msgid ""
 "Insert a FAT formatted floppy in drive %s with %s in root directory and "
@@ -11277,12 +11258,12 @@ msgstr ""
 "请在驱动器 %s 中插入一张 FAT 格式的软盘, 该软盘要求在根目录有 %s。然后, 请按 "
 "%s"
 
-#: network/thirdparty.pm:357
+#: network/thirdparty.pm:380
 #, c-format
 msgid "Floppy access error, unable to mount device %s"
 msgstr "软驱访问错误, 无法挂载 %s"
 
-#: network/thirdparty.pm:367
+#: network/thirdparty.pm:390
 #, c-format
 msgid ""
 "You need the Alcatel microcode.\n"
@@ -11293,38 +11274,38 @@ msgstr ""
 "您可以通过软盘或您的 Windows 分区提供该微代码,\n"
 "或者现在跳过稍后再做。"
 
-#: network/thirdparty.pm:371 network/thirdparty.pm:373
+#: network/thirdparty.pm:394 network/thirdparty.pm:396
 #, c-format
 msgid "Use a floppy"
 msgstr "使用软盘"
 
-#: network/thirdparty.pm:371
+#: network/thirdparty.pm:394
 #, c-format
 msgid "Use my Windows partition"
 msgstr "使用我的 Windows 分区"
 
-#: network/thirdparty.pm:381
+#: network/thirdparty.pm:404
 #, c-format
 msgid "Firmware copy failed, file %s not found"
 msgstr "固件复制失败, 文件 %s 未找到"
 
-#: network/thirdparty.pm:386 standalone/drakautoinst:250
+#: network/thirdparty.pm:409 standalone/drakautoinst:250
 #: standalone/drakvpn:888 standalone/scannerdrake:405
 #, c-format
 msgid "Congratulations!"
 msgstr "恭喜！"
 
-#: network/thirdparty.pm:386
+#: network/thirdparty.pm:409
 #, c-format
 msgid "Firmware copy succeeded"
 msgstr "固件复制成功"
 
-#: network/thirdparty.pm:451
+#: network/thirdparty.pm:477
 #, c-format
 msgid "Looking for required software and drivers..."
 msgstr "正在查找所需的软件或驱动程序..."
 
-#: network/thirdparty.pm:460
+#: network/thirdparty.pm:482
 #, c-format
 msgid "Please wait, running device configuration commands..."
 msgstr "请稍候, 正在运行设备配置命令..."
@@ -15836,7 +15817,7 @@ msgid ""
 "about this service, sorry."
 msgstr "没有该服务的附加信息。"
 
-#: services.pm:224 ugtk2.pm:1029
+#: services.pm:224 ugtk2.pm:1009
 #, c-format
 msgid "Info"
 msgstr "信息"
@@ -16259,7 +16240,7 @@ msgstr "Window Maker、Enlightenment、Fvwm 等"
 msgid "Utilities"
 msgstr "工具"
 
-#: share/compssUsers.pl:186 share/compssUsers.pl:187 standalone/logdrake:381
+#: share/compssUsers.pl:186 share/compssUsers.pl:187 standalone/logdrake:384
 #, c-format
 msgid "SSH Server"
 msgstr "SSH 服务器"
@@ -17635,12 +17616,12 @@ msgstr "没有为 cron 操作选择间隔。"
 msgid "Interval cron not available as non-root"
 msgstr "非 root 用户还不能使用间隔 cron"
 
-#: standalone/drakbackup:465 standalone/logdrake:437
+#: standalone/drakbackup:465 standalone/logdrake:440
 #, c-format
 msgid "\"%s\" neither is a valid email nor is an existing local user!"
 msgstr "“%s”既不是有效的电子邮件, 也不是已存在的本地用户!"
 
-#: standalone/drakbackup:469 standalone/logdrake:442
+#: standalone/drakbackup:469 standalone/logdrake:445
 #, c-format
 msgid ""
 "\"%s\" is a local user, but you did not select a local smtp, so you must use "
@@ -20541,59 +20522,59 @@ msgstr "日志"
 msgid "Clear logs"
 msgstr "清除日志"
 
-#: standalone/drakids:65 standalone/net_applet:439
+#: standalone/drakids:62 standalone/drakids:67 standalone/net_applet:439
 #, c-format
 msgid "Blacklist"
 msgstr "黑名单"
 
-#: standalone/drakids:69
+#: standalone/drakids:63 standalone/drakids:80 standalone/net_applet:444
+#, c-format
+msgid "Whitelist"
+msgstr "白名单"
+
+#: standalone/drakids:71
 #, c-format
 msgid "Remove from blacklist"
 msgstr "从黑名单中移除"
 
-#: standalone/drakids:70
+#: standalone/drakids:72
 #, c-format
 msgid "Move to whitelist"
 msgstr "移动到白名单"
 
-#: standalone/drakids:74 standalone/net_applet:444
-#, c-format
-msgid "Whitelist"
-msgstr "白名单"
-
-#: standalone/drakids:78
+#: standalone/drakids:84
 #, c-format
 msgid "Remove from whitelist"
 msgstr "从白名单中移除"
 
-#: standalone/drakids:134 standalone/drakids:160 standalone/drakids:169
-#: standalone/drakids:179 standalone/drakids:246 standalone/drakroam:140
-#: standalone/net_applet:180 standalone/net_applet:354
+#: standalone/drakids:136 standalone/drakids:145 standalone/drakids:170
+#: standalone/drakids:179 standalone/drakids:189 standalone/drakids:265
+#: standalone/drakroam:140 standalone/net_applet:180 standalone/net_applet:354
 #, c-format
 msgid "Unable to contact daemon"
 msgstr "无法连接守护程序"
 
-#: standalone/drakids:191
+#: standalone/drakids:202
 #, c-format
 msgid "Date"
 msgstr "日期"
 
-#: standalone/drakids:192
+#: standalone/drakids:203
 #, c-format
 msgid "Attacker"
 msgstr "攻击者"
 
-#: standalone/drakids:193
+#: standalone/drakids:204
 #, c-format
 msgid "Attack type"
 msgstr "攻击类型"
 
-#: standalone/drakids:194
+#: standalone/drakids:205
 #, c-format
 msgid "Service"
 msgstr "服务"
 
-#: standalone/drakids:195
+#: standalone/drakids:206
 #, c-format
 msgid "Network interface"
 msgstr "网卡"
@@ -21141,7 +21122,8 @@ msgid ""
 "The first character of the path must be a slash (\"/\"):\n"
 "\"%s\""
 msgstr ""
-"路径的第一个字符必须是斜线(“/”):\n“%s”"
+"路径的第一个字符必须是斜线(“/”):\n"
+"“%s”"
 
 #: standalone/drakperm:390
 #, c-format
@@ -21957,102 +21939,102 @@ msgstr "进度框透明度"
 msgid "text size"
 msgstr "文本大小"
 
-#: standalone/draksplash:60
+#: standalone/draksplash:59
 #, c-format
 msgid "Choose progress bar color 1"
 msgstr "选择进度条颜色 1"
 
-#: standalone/draksplash:61
+#: standalone/draksplash:60
 #, c-format
 msgid "Choose progress bar color 2"
 msgstr "选择进度条颜色 2"
 
-#: standalone/draksplash:62
+#: standalone/draksplash:61
 #, c-format
 msgid "Choose progress bar background"
 msgstr "选择进度条背景"
 
-#: standalone/draksplash:63
+#: standalone/draksplash:62
 #, c-format
 msgid "Gradient type"
 msgstr "渐变类型"
 
-#: standalone/draksplash:64
+#: standalone/draksplash:63
 #, c-format
 msgid "Choose text color"
 msgstr "选择文本区域颜色"
 
-#: standalone/draksplash:66 standalone/draksplash:73
+#: standalone/draksplash:65 standalone/draksplash:72
 #, c-format
 msgid "Choose picture"
 msgstr "选择图片"
 
-#: standalone/draksplash:67
+#: standalone/draksplash:66
 #, c-format
 msgid "Silent bootsplash"
 msgstr "静默启动屏幕"
 
-#: standalone/draksplash:70
+#: standalone/draksplash:69
 #, c-format
 msgid "Choose text zone color"
 msgstr "选择文本区域颜色"
 
-#: standalone/draksplash:71
+#: standalone/draksplash:70
 #, c-format
 msgid "Text color"
 msgstr "文本颜色"
 
-#: standalone/draksplash:72
+#: standalone/draksplash:71
 #, c-format
 msgid "Background color"
 msgstr "背景颜色"
 
-#: standalone/draksplash:74
+#: standalone/draksplash:73
 #, c-format
 msgid "Verbose bootsplash"
 msgstr "详细静默屏幕"
 
-#: standalone/draksplash:76
+#: standalone/draksplash:75
 #, c-format
 msgid "Display logo on Console"
 msgstr "在控制台显示 LOGO"
 
-#: standalone/draksplash:79
+#: standalone/draksplash:78
 #, c-format
 msgid "Console bootsplash"
 msgstr "控制台背景图"
 
-#: standalone/draksplash:85
+#: standalone/draksplash:84
 #, c-format
 msgid "Theme name"
 msgstr "主题名称"
 
-#: standalone/draksplash:88
+#: standalone/draksplash:87
 #, c-format
 msgid "final resolution"
 msgstr "最终分辨率"
 
-#: standalone/draksplash:93
+#: standalone/draksplash:92
 #, c-format
 msgid "Save theme"
 msgstr "保存主题"
 
-#: standalone/draksplash:154
+#: standalone/draksplash:153
 #, c-format
 msgid "saving Bootsplash theme..."
 msgstr "正在保存开机画面主题..."
 
-#: standalone/draksplash:163
+#: standalone/draksplash:162
 #, c-format
 msgid "Unable to load image file %s"
 msgstr "无法装入图像文件 %s"
 
-#: standalone/draksplash:174
+#: standalone/draksplash:173
 #, c-format
 msgid "choose image"
 msgstr "选择图像"
 
-#: standalone/draksplash:189
+#: standalone/draksplash:188
 #, c-format
 msgid "Color selection"
 msgstr "颜色选择"
@@ -24398,12 +24380,6 @@ msgstr "配置模块"
 msgid "Run config tool"
 msgstr "运行配置工具"
 
-#: standalone/harddrake2:306 standalone/net_monitor:102
-#: standalone/net_monitor:103 standalone/net_monitor:108
-#, c-format
-msgid "unknown"
-msgstr "未知"
-
 #: standalone/harddrake2:307 standalone/printerdrake:306
 #: standalone/printerdrake:320
 #, c-format
@@ -24610,82 +24586,82 @@ msgstr "不匹配"
 msgid "Choose file"
 msgstr "选择文件"
 
-#: standalone/logdrake:147
+#: standalone/logdrake:150
 #, c-format
 msgid "Calendar"
 msgstr "日历"
 
-#: standalone/logdrake:157
+#: standalone/logdrake:160
 #, c-format
 msgid "Content of the file"
 msgstr "文件内容"
 
-#: standalone/logdrake:161 standalone/logdrake:399
+#: standalone/logdrake:164 standalone/logdrake:402
 #, c-format
 msgid "Mail alert"
 msgstr "邮件提醒"
 
-#: standalone/logdrake:168
+#: standalone/logdrake:171
 #, c-format
 msgid "The alert wizard has failed unexpectedly:"
 msgstr "提醒向导意外失败:"
 
-#: standalone/logdrake:221
+#: standalone/logdrake:224
 #, c-format
 msgid "please wait, parsing file: %s"
 msgstr "请等待, 正在分析文件: %s"
 
-#: standalone/logdrake:376
+#: standalone/logdrake:379
 #, c-format
 msgid "Apache World Wide Web Server"
 msgstr "Apache WWW 服务器"
 
-#: standalone/logdrake:377
+#: standalone/logdrake:380
 #, c-format
 msgid "Domain Name Resolver"
 msgstr "域名解析器"
 
-#: standalone/logdrake:378
+#: standalone/logdrake:381
 #, c-format
 msgid "Ftp Server"
 msgstr "FTP 服务器"
 
-#: standalone/logdrake:379
+#: standalone/logdrake:382
 #, c-format
 msgid "Postfix Mail Server"
 msgstr "Postfix 邮件服务"
 
-#: standalone/logdrake:380
+#: standalone/logdrake:383
 #, c-format
 msgid "Samba Server"
 msgstr "Samba 服务器"
 
-#: standalone/logdrake:382
+#: standalone/logdrake:385
 #, c-format
 msgid "Webmin Service"
 msgstr "Webmin 服务"
 
-#: standalone/logdrake:383
+#: standalone/logdrake:386
 #, c-format
 msgid "Xinetd Service"
 msgstr "Xinetd 服务"
 
-#: standalone/logdrake:394
+#: standalone/logdrake:397
 #, c-format
 msgid "Configure the mail alert system"
 msgstr "配置邮件提醒系统"
 
-#: standalone/logdrake:395
+#: standalone/logdrake:398
 #, c-format
 msgid "Stop the mail alert system"
 msgstr "停止邮件提醒系统"
 
-#: standalone/logdrake:402
+#: standalone/logdrake:405
 #, c-format
 msgid "Mail alert configuration"
 msgstr "邮件提醒设定"
 
-#: standalone/logdrake:403
+#: standalone/logdrake:406
 #, c-format
 msgid ""
 "Welcome to the mail configuration utility.\n"
@@ -24696,66 +24672,66 @@ msgstr ""
 "\n"
 "您可以在这里配置提醒。\n"
 
-#: standalone/logdrake:406
+#: standalone/logdrake:409
 #, c-format
 msgid "What do you want to do?"
 msgstr "您想做什么?"
 
-#: standalone/logdrake:413
+#: standalone/logdrake:416
 #, c-format
 msgid "Services settings"
 msgstr "服务设置"
 
-#: standalone/logdrake:414
+#: standalone/logdrake:417
 #, c-format
 msgid ""
 "You will receive an alert if one of the selected services is no longer "
 "running"
 msgstr "如果选中的服务中有任何一个停止运行, 您将收到提醒"
 
-#: standalone/logdrake:421
+#: standalone/logdrake:424
 #, c-format
 msgid "Load setting"
 msgstr "负载设置"
 
-#: standalone/logdrake:422
+#: standalone/logdrake:425
 #, c-format
 msgid "You will receive an alert if the load is higher than this value"
 msgstr "当负载超过这个值时您会收到一个警报"
 
-#: standalone/logdrake:423
+#: standalone/logdrake:426
 #, c-format
 msgid ""
 "_: load here is a noun, the load of the system\n"
 "Load"
 msgstr "负载"
 
-#: standalone/logdrake:428
+#: standalone/logdrake:431
 #, c-format
 msgid "Alert configuration"
 msgstr "提醒配置"
 
-#: standalone/logdrake:429
+#: standalone/logdrake:432
 #, c-format
 msgid "Please enter your email address below "
 msgstr "请在下面输入您的电子邮件地址 "
 
-#: standalone/logdrake:430
+#: standalone/logdrake:433
 #, c-format
 msgid "and enter the name (or the IP) of the SMTP server you wish to use"
 msgstr "请输入您想使用的 SMTP 服务器的名称(或 IP 地址)"
 
-#: standalone/logdrake:449
+#: standalone/logdrake:452
 #, c-format
 msgid "The wizard successfully configured the mail alert."
 msgstr "向导已经成功配置了邮件提醒。"
 
-#: standalone/logdrake:455
+#: standalone/logdrake:458
 #, c-format
 msgid "The wizard successfully disabled the mail alert."
 msgstr "向导已经成功禁用了邮件提醒。"
 
-#: standalone/logdrake:514
+#: standalone/logdrake:517
 #, c-format
 msgid "Save as.."
 msgstr "另存为..."
@@ -25783,47 +25759,47 @@ msgstr "安装更新"
 msgid "Exit install"
 msgstr "退出安装"
 
-#: ugtk2.pm:919
+#: ugtk2.pm:899
 #, c-format
 msgid "Is this correct?"
 msgstr "这样正确吗?"
 
-#: ugtk2.pm:979
+#: ugtk2.pm:959
 #, c-format
 msgid "No file chosen"
 msgstr "未选择文件"
 
-#: ugtk2.pm:981
+#: ugtk2.pm:961
 #, c-format
 msgid "You have chosen a file, not a directory"
 msgstr "您选择了文件，而非目录"
 
-#: ugtk2.pm:983
+#: ugtk2.pm:963
 #, c-format
 msgid "You have chosen a directory, not a file"
 msgstr "您选择了目录，而非文件"
 
-#: ugtk2.pm:985
+#: ugtk2.pm:965
 #, c-format
 msgid "No such directory"
 msgstr "无此目录"
 
-#: ugtk2.pm:985
+#: ugtk2.pm:965
 #, c-format
 msgid "No such file"
 msgstr "非本地文件"
 
-#: ugtk2.pm:1066
+#: ugtk2.pm:1046
 #, c-format
 msgid "Expand Tree"
 msgstr "展开树"
 
-#: ugtk2.pm:1067
+#: ugtk2.pm:1047
 #, c-format
 msgid "Collapse Tree"
 msgstr "折叠树"
 
-#: ugtk2.pm:1068
+#: ugtk2.pm:1048
 #, c-format
 msgid "Toggle between flat and group sorted"
 msgstr "切换清单显示/分组排序"
@@ -25841,3 +25817,21 @@ msgstr ""
 #, c-format
 msgid "Installation failed"
 msgstr "安装失败"
+
+#~ msgid "http://www.mandrivalinux.com/en/errata.php3"
+#~ msgstr "http://www.mandrivalinux.com/en/errata.php3"
+
+#~ msgid ""
+#~ "_: keyboard\n"
+#~ "Dvorak (Esperanto)"
+#~ msgstr "Dvorak(世界语)"
+
+#~ msgid ""
+#~ "_: keyboard\n"
+#~ "Lithuanian AZERTY (old)"
+#~ msgstr "立陶宛 AZERTY(老式)"
+
+#~ msgid ""
+#~ "_: keyboard\n"
+#~ "Lithuanian \"phonetic\" QWERTY"
+#~ msgstr "立陶宛“同音”QWERTY"
-- 
cgit v1.2.1