From 411e0e9d500d91cf111fb93209acd7d461ee2453 Mon Sep 17 00:00:00 2001 From: Pablo Saratxaga Date: Fri, 16 May 2003 15:55:38 +0000 Subject: updated pot file --- perl-install/share/po/uk.po | 25194 +++++++++++++++++++++--------------------- 1 file changed, 12629 insertions(+), 12565 deletions(-) (limited to 'perl-install/share/po/uk.po') diff --git a/perl-install/share/po/uk.po b/perl-install/share/po/uk.po index e59012155..ecf3c38ec 100644 --- a/perl-install/share/po/uk.po +++ b/perl-install/share/po/uk.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: DrakX\n" -"POT-Creation-Date: 2003-03-24 22:30+0100\n" +"POT-Creation-Date: 2003-05-16 14:13+0200\n" "PO-Revision-Date: 2001-08-30 13:19+09:00\n" "Last-Translator: Dmytro Kovalov \n" "Language-Team: Ukrainian \n" @@ -13,3254 +13,614 @@ msgstr "" "Content-Type: text/plain; charset=koi8-u\n" "Content-Transfer-Encoding: 8bit\n" -#: ../../any.pm:1 -#, c-format -msgid "" -"The per-user sharing uses the group \"fileshare\". \n" -"You can use userdrake to add a user to this group." -msgstr "" - -#: ../../any.pm:1 ../../install_steps_gtk.pm:1 -#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1 -#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1 -#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 -#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1 -#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1 -#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1 -#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1 -#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1 -#: ../../standalone/drakfont:1 ../../standalone/drakgw:1 -#: ../../standalone/draksec:1 ../../standalone/logdrake:1 -#: ../../standalone/net_monitor:1 -#, c-format -msgid "Cancel" -msgstr "В╕дм╕нити" - -#: ../../any.pm:1 -#, c-format -msgid "Launch userdrake" -msgstr "" - -#: ../../any.pm:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "" -"Would you like to allow users to share some of their directories?\n" -"Allowing this will permit users to simply click on \"Share\" in konqueror " -"and nautilus.\n" -"\n" -"\"Custom\" permit a per-user granularity.\n" -msgstr "" +msgid "Scanning partitions to find mount points" +msgstr "Сканування п╕дрозд╕л╕в для знаходження точок монтування" -#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1 +#: ../../security/help.pm:1 #, c-format -msgid "Mandatory package %s is missing" +msgid "if set to yes, check additions/removals of suid root files." msgstr "" -#: ../../any.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "" -"You can export using NFS or Samba. Please select which you'd like to use." +msgid "\t\tErase=%s" msgstr "" -#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1 +#: ../../standalone/harddrake2:1 #, fuzzy, c-format -msgid "The package %s needs to be installed. Do you want to install it?" -msgstr "Як╕ пакети Ви хочете встановити?" - -#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1 -#, c-format -msgid "Custom" -msgstr "Спец╕альний" +msgid "network printer port" +msgstr "Принтер в мереж╕ (сокет)" -#: ../../any.pm:1 +#: ../../standalone/drakTermServ:1 #, fuzzy, c-format -msgid "Allow all users" -msgstr "Додати користувача" +msgid "Please insert floppy disk:" +msgstr "Вставте системну дискету, яка вживалася в дисковод╕ %s" -#: ../../any.pm:1 -#, fuzzy, c-format -msgid "No sharing" -msgstr "Старту╓ CUPS" +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "PCMCIA" +msgstr "PCMCIA" -#: ../../any.pm:1 ../../install_steps_interactive.pm:1 #: ../../diskdrake/interactive.pm:1 #, c-format -msgid "More" -msgstr "Ще" - -#: ../../any.pm:1 -#, fuzzy, c-format -msgid "Here is the full list of available countries" -msgstr "Тут наведено повний список наявних клав╕атур" - -#: ../../any.pm:1 -#, fuzzy, c-format -msgid "Please choose your country." -msgstr "Який тип миш╕ ви ма╓те?" - -#: ../../any.pm:1 ../../install_steps_interactive.pm:1 -#, fuzzy, c-format -msgid " / Region" -msgstr "Рен╕он" - -#: ../../any.pm:1 ../../install_steps_interactive.pm:1 -#, fuzzy, c-format -msgid "Country" -msgstr "Кра╖на:" +msgid "" +"The backup partition table has not the same size\n" +"Still continue?" +msgstr "" +"Авар╕йна таблиця п╕дрозд╕л╕в ма╓ ╕нший розм╕р\n" +"Продовжувати?" -#: ../../any.pm:1 +#: ../../diskdrake/smbnfs_gtk.pm:1 #, fuzzy, c-format -msgid "All languages" -msgstr "Вибер╕ть мову" +msgid "Which username" +msgstr "╤м'я користувача" #: ../../any.pm:1 #, c-format -msgid "Use Unicode by default" -msgstr "" +msgid "Which type of entry do you want to add?" +msgstr "Який тип ви хочете додати?" -#: ../../any.pm:1 +#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format -msgid "" -"Mandrake Linux can support multiple languages. Select\n" -"the languages you would like to install. They will be available\n" -"when your installation is complete and you restart your system." -msgstr "" -"Ви можете вибрати також ╕нш╕ мови, як╕ будуть доступн╕ в систем╕ п╕сля\n" -"установки" +msgid "Restore partition table" +msgstr "В╕дновити таблицю п╕дрозд╕л╕в" -#: ../../any.pm:1 +#: ../../printer/cups.pm:1 #, fuzzy, c-format -msgid "Please choose a language to use." -msgstr "Вибер╕ть, будь-ласка, мову." +msgid "On CUPS server \"%s\"" +msgstr "IP адреса CUPS сервера" -#: ../../any.pm:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "Choose the window manager to run:" -msgstr "Вибер╕ть менеджер в╕кон, яким ви хочете користуватися" +msgid "Post-install configuration" +msgstr "Конф╕╜урац╕я п╕сля установки" -#: ../../any.pm:1 +#: ../../diskdrake/hd_gtk.pm:1 #, c-format -msgid "Choose the default user:" -msgstr "Вибер╕ть стандартного користувача:" +msgid "Use ``%s'' instead" +msgstr "Зам╕сть цього скористайтеся ``%s''" -#: ../../any.pm:1 -#, fuzzy, c-format -msgid "Do you want to use this feature?" -msgstr "Чи Ви хочете використовувати aboot?" +#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 +#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1 +#, c-format +msgid "Type" +msgstr "Тип" -#: ../../any.pm:1 +#: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "I can set up your computer to automatically log on one user." +msgid "" +"\n" +"Also printers configured with the PPD files provided by their manufacturers " +"or with native CUPS drivers cannot be transferred." msgstr "" -"Я можу настро╖ти Вашу систему так, що X буде стартувати автоматично\n" -"п╕сля завантаження системи.\n" -"Чи ви бажа╓те скористуватися ц╕╓ю можлив╕стю?" +"\n" +"Кр╕м того, принтери сконф╕╜урован╕ за допомогою наданих виробниками\n" +"файл╕в PPD чи принтери, що мають р╕дн╕ драйвери CUPS не можуть бути\n" +"перенесеними." -#: ../../any.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Autologin" -msgstr "Авторе╓страц╕я" +msgid "Sri Lanka" +msgstr "Шр╕ Ланка" -#: ../../any.pm:1 +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"The following printer\n" +"\n" +"%s%s\n" +"are directly connected to your system" +msgstr "У Ваш╕й систем╕ нема╓ адаптера мереж╕!" + +#: ../../lang.pm:1 #, c-format -msgid "Icon" -msgstr "П╕ктограма" +msgid "Central African Republic" +msgstr "Центральна Африканська Республ╕ка" -#: ../../any.pm:1 +#: ../../network/network.pm:1 #, c-format -msgid "Shell" -msgstr "Командна оболонка" +msgid "Gateway device" +msgstr "Шлюзовий пристр╕й" -#: ../../any.pm:1 ../../install_steps_interactive.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Password (again)" -msgstr "Пароль (ще раз)" +msgid "Net Method:" +msgstr "" + +#: ../../harddrake/data.pm:1 +#, fuzzy, c-format +msgid "Ethernetcard" +msgstr "Плата Ethernet" -#: ../../any.pm:1 ../../install_steps_interactive.pm:1 -#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1 -#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/drakconnect:1 #, c-format -msgid "Password" -msgstr "Пароль" +msgid "Parameters" +msgstr "Параметри" -#: ../../any.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "User name" -msgstr "╤м'я користувача" +#: ../../harddrake/v4l.pm:1 +#, fuzzy, c-format +msgid "Auto-detect" +msgstr "Користуватися автовизначенням" -#: ../../any.pm:1 +#: ../../standalone/drakconnect:1 #, c-format -msgid "Real name" -msgstr "Повне ╕м'я" +msgid "Interface:" +msgstr "╤нтерфейс:" -#: ../../any.pm:1 +#: ../../steps.pm:1 #, c-format -msgid "Accept user" -msgstr "Прийняти користувача" +msgid "Select installation class" +msgstr "Вибер╕ть тип установки" -#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1 -#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 -#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1 -#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Done" -msgstr "Зак╕нчено" +msgid "on CDROM" +msgstr "" -#: ../../any.pm:1 -#, c-format +#: ../../network/tools.pm:1 +#, fuzzy, c-format msgid "" -"Enter a user\n" -"%s" +"The system doesn't seem to be connected to the Internet.\n" +"Try to reconfigure your connection." msgstr "" -"Введ╕ть користувача\n" -"%s" +"Система зда╓ться не п╕дключена до ╕нтернету.\n" +"Спробуйте зм╕нити конф╕гурац╕ю свого з'╓днання." -#: ../../any.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Add user" -msgstr "Додати користувача" +msgid "" +"Connect your printer to a Linux server and let your Windows machine(s) " +"connect to it as a client.\n" +"\n" +"Do you really want to continue setting up this printer as you are doing now?" +msgstr "" -#: ../../any.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "This user name has already been added" -msgstr "Це ╕м'я вже зайняте" +msgid "Belarus" +msgstr "Б╕лорусь" -#: ../../any.pm:1 -#, fuzzy, c-format -msgid "The user name is too long" -msgstr "Це ╕м'я вже зайняте" +#: ../../partition_table.pm:1 +#, c-format +msgid "Error writing to file %s" +msgstr "Помилка при запис╕ у файл %s" -#: ../../any.pm:1 +#: ../../services.pm:1 #, c-format msgid "" -"The user name must contain only lower cased letters, numbers, `-' and `_'" +"apmd is used for monitoring battery status and logging it via syslog.\n" +"It can also be used for shutting down the machine when the battery is low." msgstr "" -"╤м'я користувача повинно складатися т╕льки з малих латинських л╕тер,\n" -"чисел, `-' та `_'" +"apmd служить для контролю за р╕внем батаре╖ та запису пов╕домлень про\n" +"це у систмний журнал syslog. Кр╕м цього в╕н може вимикати комп'ютер,\n" +"коли батарея розрядилася." -#: ../../any.pm:1 -#, c-format -msgid "Please give a user name" -msgstr "Дайте, будь-ласка, ╕м'я користувача" +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Use tape to backup" +msgstr "Поганий резервний файл" -#: ../../any.pm:1 +#: ../../install_steps_gtk.pm:1 #, c-format -msgid "This password is too simple" -msgstr "Пароль занадто простий" +msgid "The following packages are going to be installed" +msgstr "Ц╕ пакети будуть встановленими" -#: ../../any.pm:1 ../../install_steps_interactive.pm:1 -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Please try again" -msgstr "Будь-ласка, спробуйте ще раз" +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "CUPS configuration" +msgstr "Конф╕╜урац╕я" -#: ../../any.pm:1 ../../install_steps_interactive.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "The passwords do not match" -msgstr "Парол╕ р╕зн╕" +msgid "Hong Kong" +msgstr "Гон╜ Кон╜" -#: ../../any.pm:1 +#: ../../install_interactive.pm:1 #, c-format -msgid "(already added %s)" -msgstr "(вже створений %s)" +msgid "Not enough free space to allocate new partitions" +msgstr "Недостатньо в╕льного простору для нових п╕дрозд╕л╕в" -#: ../../any.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "access to compilation tools" -msgstr "" +msgid "Moving" +msgstr "Перем╕щення" -#: ../../any.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "access to network tools" +msgid "" +"\n" +"Drakbackup activities via %s:\n" +"\n" msgstr "" -#: ../../any.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "access to administrative files" +msgid "(" msgstr "" -#: ../../any.pm:1 +#: ../../network/netconnect.pm:1 #, c-format -msgid "allow \"su\"" +msgid "" +"Welcome to The Network Configuration Wizard.\n" +"\n" +"We are about to configure your internet/network connection.\n" +"If you don't want to use the auto detection, deselect the checkbox.\n" msgstr "" +"Ласкаво просимо до пом╕чника установки мереж╕.\n" +"\n" +"Зараз ваша мережа та ╕нтернет з'╓днання будуть настро╓н╕. Якщо ви не\n" +"хочете користуватись автоматичним визначенням, в╕дм╕н╕ть виб╕р опц╕╖.\n" -#: ../../any.pm:1 +#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 #, c-format -msgid "access to rpm tools" +msgid ")" msgstr "" -#: ../../any.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "access to X programs" -msgstr "" +msgid "Lebanon" +msgstr "Л╕ван" -#: ../../any.pm:1 +#: ../../mouse.pm:1 #, c-format -msgid "" -"Here are the entries on your boot menu so far.\n" -"You can create additional entries or change the existing ones." -msgstr "" -"Тут наведен╕ р╕зноман╕тн╕ пункти.\n" -"ви можете або додати ще деяк╕, або зм╕нити т╕, що вже ╕снують." +msgid "MM HitTablet" +msgstr "MM HitTablet" -#: ../../any.pm:1 -#, c-format -msgid "Other OS (windows...)" -msgstr "╤нш╕ системи (windows...)" +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "Stop" +msgstr "Сектор" -#: ../../any.pm:1 -#, c-format -msgid "Other OS (MacOS...)" -msgstr "╤нш╕ системи (MacOS...)" +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "Edit selected host" +msgstr "знайдено %s" -#: ../../any.pm:1 +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "No CD device defined!" +msgstr "Вибер╕ть файл" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Bulgarian (phonetic)" +msgstr "В╕рменська (фонетична)" + +#: ../../standalone/drakpxe:1 #, c-format -msgid "Other OS (SunOS...)" -msgstr "╤нш╕ системи (SunOS...)" +msgid "The DHCP start ip" +msgstr "" -#: ../../any.pm:1 ../../standalone/drakbackup:1 +#: ../../Xconfig/card.pm:1 #, c-format -msgid "Linux" -msgstr "Л╕накс" +msgid "256 kB" +msgstr "256 кб" #: ../../any.pm:1 #, c-format -msgid "Which type of entry do you want to add?" -msgstr "Який тип ви хочете додати?" +msgid "Bootloader main options" +msgstr "Основн╕ опц╕╖ завантажувача" -#: ../../any.pm:1 +#: ../../standalone.pm:1 #, c-format -msgid "This label is already used" -msgstr "Ця етикетка вже використову╓ться" +msgid "" +"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" +"usbtable] [--dynamic=dev]" +msgstr "" -#: ../../any.pm:1 +#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "You must specify a root partition" -msgstr "Ви повинн╕ мати п╕дрозд╕л для своп " +msgid "Tape" +msgstr "Тип" -#: ../../any.pm:1 +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Scanning network..." +msgstr "Починаю з'╓днання..." + +#: ../../standalone/drakbackup:1 #, c-format -msgid "You must specify a kernel image" +msgid "" +"With this option you will be able to restore any version\n" +" of your /etc directory." msgstr "" -#: ../../any.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Empty label not allowed" -msgstr "Не дозволяються пуст╕ етикетки" +msgid "Malaysia" +msgstr "Малаз╕я" -#: ../../any.pm:1 ../../harddrake/v4l.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Default" -msgstr "Основна" +msgid "Swiss (French layout)" +msgstr "Швейцарська (французька розкладка)" -#: ../../any.pm:1 +#: ../../raid.pm:1 #, c-format -msgid "NoVideo" -msgstr "БезВ╕део" +msgid "mkraid failed (maybe raidtools are missing?)" +msgstr "зб╕й у mkraid (можливо не встановлен╕ raidtools?)" -#: ../../any.pm:1 +#: ../../harddrake/data.pm:1 #, c-format -msgid "Initrd-size" -msgstr "Розм╕р Initrd" +msgid "Webcam" +msgstr "" -#: ../../any.pm:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "Append" -msgstr "При╓днати" +msgid "size of the (second level) cpu cache" +msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "Label" -msgstr "Етикетка" +#: ../../harddrake/data.pm:1 +#, fuzzy, c-format +msgid "Soundcard" +msgstr "Звукова плата" -#: ../../any.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Unsafe" -msgstr "Небезпечно" +msgid "" +"To print a file from the command line (terminal window) use the command \"%s " +"\".\n" +msgstr "" -#: ../../any.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Table" -msgstr "Таблиця" +msgid "Level %s\n" +msgstr "Р╕вень %s\n" -#: ../../any.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Root" -msgstr "Root" +msgid "Luxembourg" +msgstr "Люксембур╜" -#: ../../any.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Read-write" -msgstr "Запис/читання" +msgid "" +"\n" +" DrakBackup Daemon Report\n" +"\n" +"\n" +msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "Initrd" -msgstr "Initrd" +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Iran" +msgstr "╤рак" -#: ../../any.pm:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "Video mode" -msgstr "В╕део режим" +msgid "Bus" +msgstr "" -#: ../../any.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Image" -msgstr "Образ" +msgid "Iraq" +msgstr "╤рак" -#: ../../any.pm:1 +#: ../../standalone/drakgw:1 #, c-format -msgid "Default OS?" -msgstr "Основна система?" +msgid "Potential LAN address conflict found in current config of %s!\n" +msgstr "В дан╕й конф╕гурац╕╖ %s знайдено потенц╕йний конфл╕кт адреси мереж╕!\n" -#: ../../any.pm:1 +#: ../../standalone/drakgw:1 #, c-format -msgid "Enable OF Boot?" -msgstr "Дозволити завантаження OF?" +msgid "Configuring..." +msgstr "Конф╕гурац╕я..." -#: ../../any.pm:1 +#: ../../standalone/drakgw:1 #, c-format -msgid "Enable CD Boot?" -msgstr "Дозволити завантаження з компакт-диску?" +msgid "The setup has already been done, and it's currently enabled." +msgstr "" +"Установка сп╕льного користування з'╓днанням з ╕нтернетом вже зроблена,\n" +"на даний час воно дозволено." -#: ../../any.pm:1 +#: ../../harddrake/v4l.pm:1 #, c-format -msgid "Kernel Boot Timeout" -msgstr "Затримка при завантаженн╕ ядра" +msgid "" +"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" +"detect the rights parameters.\n" +"If your card is misdetected, you can force the right tuner and card types " +"here. Just select your tv card parameters if needed." +msgstr "" -#: ../../any.pm:1 +#: ../../any.pm:1 ../../install_steps_interactive.pm:1 #, c-format -msgid "Open Firmware Delay" -msgstr "Затримка Open Firmware" +msgid "Password (again)" +msgstr "Пароль (ще раз)" -#: ../../any.pm:1 +#: ../../standalone/drakfont:1 #, c-format -msgid "Boot device" -msgstr "Пристр╕й завантаження" +msgid "Search installed fonts" +msgstr "" -#: ../../any.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Init Message" -msgstr "Пов╕домлення при завантаженн╕" +msgid "Venezuela" +msgstr "Венесуела" -#: ../../any.pm:1 +#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1 +#: ../../standalone/drakconnect:1 #, c-format -msgid "Bootloader to use" -msgstr "Використовувати завантажувач" +msgid "IP address" +msgstr "IP-адреса" -#: ../../any.pm:1 +#: ../../install_interactive.pm:1 #, c-format -msgid "Bootloader main options" -msgstr "Основн╕ опц╕╖ завантажувача" +msgid "Choose the sizes" +msgstr "Вибер╕ть розм╕ри" -#: ../../any.pm:1 +#: ../../standalone/drakbackup:1 #, c-format msgid "" -"Option ``Restrict command line options'' is of no use without a password" -msgstr "Опц╕я ``Обмежити опц╕╖ командного рядка'' не ма╓ сенсу без пароля" - -#: ../../any.pm:1 -#, c-format -msgid "Give the ram size in MB" -msgstr "Давати розм╕р пам'ят╕ в Мб" - -#: ../../any.pm:1 -#, c-format -msgid "Enable multiple profiles" -msgstr "Дозволити багатопроф╕льн╕сть" - -#: ../../any.pm:1 -#, c-format -msgid "Precise RAM size if needed (found %d MB)" -msgstr "Точний об'╓м пам'ят╕ (RAM). Знайдено %d Мб" +"List of data corrupted:\n" +"\n" +msgstr "" -#: ../../any.pm:1 +#: ../../network/modem.pm:1 #, c-format -msgid "Clean /tmp at each boot" -msgstr "Очищати /tmp при кожному перевантаженн╕" +msgid "" +"Your modem isn't supported by the system.\n" +"Take a look at http://www.linmodems.org" +msgstr "" -#: ../../any.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Create a bootdisk" -msgstr "Створити авар╕йну дискету" +msgid "Choose another partition" +msgstr "Створити ╕нший п╕дрозд╕л" -#: ../../any.pm:1 -#, c-format -msgid "restrict" -msgstr "обмежити" +#: ../../standalone/drakperm:1 +#, fuzzy, c-format +msgid "Current user" +msgstr "Прийняти користувача" -#: ../../any.pm:1 -#, c-format -msgid "Restrict command line options" -msgstr "Обмежити опц╕╖ командного рядка" +#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Username" +msgstr "╤м'я користувача" -#: ../../any.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Force No APIC" +msgid "Left \"Windows\" key" msgstr "" -#: ../../any.pm:1 +#: ../../standalone/drakTermServ:1 #, fuzzy, c-format -msgid "Enable ACPI" -msgstr "Дозволити завантаження з компакт-диску?" +msgid "dhcpd Server Configuration" +msgstr "Конф╕╜урац╕я локально╖ мереж╕" -#: ../../any.pm:1 +#: ../../standalone/drakperm:1 #, c-format -msgid "Delay before booting default image" -msgstr "Пауза перед завантаженням основно╖ системи" +msgid "" +"Used for directory:\n" +" only owner of directory or file in this directory can delete it" +msgstr "" -#: ../../any.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "compact" -msgstr "компактний" +msgid "Guyana" +msgstr "╫аяна" -#: ../../any.pm:1 +#: ../../printer/main.pm:1 #, c-format -msgid "Compact" -msgstr "Компактний" +msgid " on Novell server \"%s\", printer \"%s\"" +msgstr "" -#: ../../any.pm:1 +#: ../../standalone/drakfloppy:1 #, c-format -msgid "Bootloader installation" -msgstr "Установка завантажувача" +msgid "Remove a module" +msgstr "Забрати модуль" -#: ../../any.pm:1 +#: ../../any.pm:1 ../../install_steps_interactive.pm:1 +#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1 +#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 +#: ../../standalone/drakconnect:1 #, c-format -msgid "First sector of boot partition" -msgstr "Перший сектор системного п╕дрозд╕лу (boot partition)" +msgid "Password" +msgstr "Пароль" -#: ../../any.pm:1 +#: ../../security/help.pm:1 #, c-format -msgid "First sector of drive (MBR)" -msgstr "Перший сектор диску (MBR)" +msgid "" +"Arguments: (max, inactive=-1)\n" +"\n" +"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive" +"\\fP." +msgstr "" -#: ../../any.pm:1 -#, c-format -msgid "Where do you want to install the bootloader?" -msgstr "Де ви хочете встановити стартовий блок?" +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Advanced Configuration" +msgstr "Конф╕╜урац╕я локально╖ мереж╕" -#: ../../any.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "LILO/grub Installation" -msgstr "Установка LILO/grub" +msgid "Scanning on your HP multi-function device" +msgstr "" #: ../../any.pm:1 #, c-format -msgid "SILO Installation" -msgstr "Установка SILO" +msgid "Root" +msgstr "Root" -#: ../../any.pm:1 ../../printer/printerdrake.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Skip" -msgstr "Пропустити" +msgid "Choose an existing RAID to add to" +msgstr "Вибер╕ть ╕снуючий RAID, до якого додати" -#: ../../any.pm:1 -#, fuzzy, c-format -msgid "On Floppy" -msgstr "Записати на дискету" +#: ../../keyboard.pm:1 +#, c-format +msgid "Turkish (modern \"Q\" model)" +msgstr "Турецька (традиц╕йна \"Q\" модель)" -#: ../../any.pm:1 -#, fuzzy, c-format -msgid "First sector of the root partition" -msgstr "Перший сектор системного п╕дрозд╕лу (boot partition)" +#: ../../standalone/drakboot:1 +#, c-format +msgid "Lilo message not found" +msgstr "" -#: ../../any.pm:1 +#: ../../services.pm:1 #, c-format msgid "" -"You decided to install the bootloader on a partition.\n" -"This implies you already have a bootloader on the hard drive you boot (eg: " -"System Commander).\n" -"\n" -"On which drive are you booting?" +"Automatic regeneration of kernel header in /boot for\n" +"/usr/include/linux/{autoconf,version}.h" msgstr "" +"Автоматичне створення файл╕в заголовк╕в для ядра в каталоз╕ /boot для\n" +"/usr/include/linux/{autoconf,version}.h" -#: ../../any.pm:1 +#: ../../standalone/drakfloppy:1 #, c-format -msgid "Creating bootdisk..." -msgstr "Створюю дискету для завантаження" +msgid "if needed" +msgstr "якщо потр╕бно" -#: ../../any.pm:1 +#: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "Insert a floppy in %s" -msgstr "Вставте дискету в дисков╕д %s" - -#: ../../any.pm:1 -#, c-format -msgid "Choose the floppy drive you want to use to make the bootdisk" -msgstr "" -"Вибер╕ть прив╕д дискети, який Ви хочете використовувати для створення\n" -"авар╕йно╖ дискети" - -#: ../../any.pm:1 -#, c-format -msgid "Second floppy drive" -msgstr "Другий прив╕д дискети" +msgid "Restore Failed..." +msgstr "В╕дновити з файлу" -#: ../../any.pm:1 -#, c-format -msgid "First floppy drive" -msgstr "Перша дискета" +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "/Autodetect _jazz drives" +msgstr "Користуватися автовизначенням" -#: ../../any.pm:1 -#, c-format -msgid "Sorry, no floppy drive available" -msgstr "Перепрошую, нема╓ приводу дискети" - -#: ../../any.pm:1 -#, c-format -msgid "" -"A custom bootdisk provides a way of booting into your Linux system without\n" -"depending on the normal bootloader. This is useful if you don't want to " -"install\n" -"LILO (or grub) on your system, or another operating system removes LILO, or " -"LILO doesn't\n" -"work with your hardware configuration. A custom bootdisk can also be used " -"with\n" -"the Mandrake rescue image, making it much easier to recover from severe " -"system\n" -"failures. Would you like to create a bootdisk for your system?\n" -"%s" -msgstr "" -"Спец╕ально створений диск для завантаження забезпечить Вам можлив╕сть\n" -"запуску системи незалежно в╕д звичайного завантажувача. Це може\n" -"знадобитися у тих випадках, коли Ви не бажа╓те встановлювати LILO (або\n" -"grub) в сво╖й систем╕, або коли ╕нша операц╕йна система \"перетира╓\"\n" -"LILO, або коли LILO не працю╓ з новою конф╕гурац╕╓ю апаратних\n" -"засоб╕в. Авар╕йний диск може також використовуватися разом з Mandrake\n" -"авар╕йним диском, що робить в╕дновлення в╕д серйозних системних крах╕в\n" -"набагато прост╕шим. Чи бажа╓те Ви створити авар╕йний диск для сво╓╖\n" -"системи?\n" -"%s" - -#: ../../any.pm:1 -#, c-format -msgid "" -"\n" -"\n" -"(WARNING! You're using XFS for your root partition,\n" -"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n" -"because XFS needs a very large driver)." -msgstr "" - -#: ../../any.pm:1 -#, c-format -msgid "" -"A custom bootdisk provides a way of booting into your Linux system without\n" -"depending on the normal bootloader. This is useful if you don't want to " -"install\n" -"SILO on your system, or another operating system removes SILO, or SILO " -"doesn't\n" -"work with your hardware configuration. A custom bootdisk can also be used " -"with\n" -"the Mandrake rescue image, making it much easier to recover from severe " -"system\n" -"failures.\n" -"\n" -"If you want to create a bootdisk for your system, insert a floppy in the " -"first\n" -"drive and press \"Ok\"." -msgstr "" -"Спец╕ально створений диск для завантаження забезпечить Вам можлив╕сть\n" -"запуску системи незалежно в╕д звичайного завантажувача. Це може\n" -"знадобитися у тих випадках, коли Ви не бажа╓те встановлювати SILO в\n" -"сво╖й систем╕, або коли ╕нша операц╕йна система \"перетира╓\" SILO, або\n" -"коли SILO не працю╓ з новою конф╕гурац╕╓ю апаратних засоб╕в. Авар╕йний\n" -"диск може також використовуватися разом з Mandrake авар╕йним диском,\n" -"що робить в╕дновлення в╕д серйозних системних крах╕в набагато\n" -"прост╕шим. \n" -"\n" -"Якщо Ви бажа╓те створити авар╕йний диск для сво╓╖ системи вставте\n" -"дискету в перший дисков╕д ╕ натисн╕ть \"Гаразд\"." - -#: ../../bootloader.pm:1 -#, fuzzy, c-format -msgid "You can't install the bootloader on a %s partition\n" -msgstr "Де ви хочете встановити стартовий блок?" - -#: ../../bootloader.pm:1 -#, c-format -msgid "not enough room in /boot" -msgstr "недостатньо м╕сця в /boot" - -# NOTE: this message will be displayed by grub at boot time; that is -# using the BIOS font; that means cp437 charset on 99.99% of PC computers -# out there. It is then suggested that for non latin languages an ascii -# transliteration be used; or maybe the english text be used; as it is best -# -# The lines must fit on screen, aka length < 80 -# and only one line per string for the GRUB messages -# -#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) -#. -PO: and keep them smaller than 79 chars long -#: ../../bootloader.pm:1 -#, c-format -msgid "The highlighted entry will be booted automatically in %d seconds." -msgstr "Pidsvichena systema zavantazhyt'sja avtomatichno cherez %d sekund." - -# NOTE: this message will be displayed by grub at boot time; that is -# using the BIOS font; that means cp437 charset on 99.99% of PC computers -# out there. It is then suggested that for non latin languages an ascii -# transliteration be used; or maybe the english text be used; as it is best -# -# The lines must fit on screen, aka length < 80 -# and only one line per string for the GRUB messages -# -#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) -#. -PO: and keep them smaller than 79 chars long -#: ../../bootloader.pm:1 -#, c-format -msgid "commands before booting, or 'c' for a command-line." -msgstr "" -"komandy pered zavantazhennjam, ta 'c' dlja perehodu v komandnyj rezhim." - -# NOTE: this message will be displayed by grub at boot time; that is -# using the BIOS font; that means cp437 charset on 99.99% of PC computers -# out there. It is then suggested that for non latin languages an ascii -# transliteration be used; or maybe the english text be used; as it is best -# -# The lines must fit on screen, aka length < 80 -# and only one line per string for the GRUB messages -# -#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) -#. -PO: and keep them smaller than 79 chars long -#: ../../bootloader.pm:1 -#, c-format -msgid "Press enter to boot the selected OS, 'e' to edit the" -msgstr "" -"Natysnit' enter shchob zavantazhyty vibranu systemu, 'e' shchob redaguvaty" - -# NOTE: this message will be displayed by grub at boot time; that is -# using the BIOS font; that means cp437 charset on 99.99% of PC computers -# out there. It is then suggested that for non latin languages an ascii -# transliteration be used; or maybe the english text be used; as it is best -# -# The lines must fit on screen, aka length < 80 -# and only one line per string for the GRUB messages -# -#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) -#. -PO: and keep them smaller than 79 chars long -#: ../../bootloader.pm:1 -#, c-format -msgid "Use the %c and %c keys for selecting which entry is highlighted." -msgstr "Dlja vyboru pidsvichenogo punktu korystujtesja klavishamy %c ta %c." - -# NOTE: this message will be displayed by grub at boot time; that is -# using the BIOS font; that means cp437 charset on 99.99% of PC computers -# out there. It is the nsuggested that for non latin languages an ascii -# transliteration be used; or maybe the english text be used; as it is best -# -# The lines must fit on screen, aka length < 80 -# and only one line per string for the GRUB messages -# -#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) -#. -PO: and keep them smaller than 79 chars long -#: ../../bootloader.pm:1 -#, c-format -msgid "Welcome to GRUB the operating system chooser!" -msgstr "Laskavo prosymo do prohramy vyboru operacijnoyi systemy GRUB!" - -#: ../../bootloader.pm:1 -#, c-format -msgid "Yaboot" -msgstr "Yaoot" - -#: ../../bootloader.pm:1 -#, c-format -msgid "Grub" -msgstr "Grub" - -#: ../../bootloader.pm:1 -#, c-format -msgid "LILO with text menu" -msgstr "LILO з текстовим меню" - -#: ../../bootloader.pm:1 -#, c-format -msgid "LILO with graphical menu" -msgstr "LILO з граф╕чним меню" - -#: ../../bootloader.pm:1 -#, c-format -msgid "SILO" -msgstr "SILO" - -# NOTE: this message will be displayed at boot time; that is -# only the ascii charset will be available on most machines -# so use only 7bit for this message (and do transliteration or -# leave it in English, as it is the best for your language) -# -#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) -#: ../../bootloader.pm:1 -#, c-format -msgid "" -"Welcome to %s the operating system chooser!\n" -"\n" -"Choose an operating system from the list above or\n" -"wait %d seconds for default boot.\n" -"\n" -msgstr "" -"Laskavo prosymo do %s - peremykacha operaciynih system!\n" -"\n" -"Vyberit' odnu z operaciynikh system v spysku abo pochekajte %d sekund\n" -"poki pochne vantazhytysja persha z inh.\n" -"\n" - -#: ../../common.pm:1 -#, c-format -msgid "consolehelper missing" -msgstr "" - -#: ../../common.pm:1 -#, c-format -msgid "kdesu missing" -msgstr "нема╓ kdesu" - -#: ../../common.pm:1 -#, fuzzy, c-format -msgid "Screenshots will be available after install in %s" -msgstr "" -"Ви можете вибрати також ╕нш╕ мови, як╕ будуть доступн╕ в систем╕ п╕сля\n" -"установки" - -#: ../../common.pm:1 -#, fuzzy, c-format -msgid "Can't make screenshots before partitioning" -msgstr "Не можу додати жодного п╕дрозд╕лу" - -#: ../../common.pm:1 -#, c-format -msgid "%d seconds" -msgstr "%d секунд" - -#: ../../common.pm:1 -#, c-format -msgid "1 minute" -msgstr "1 хвилина" - -#: ../../common.pm:1 -#, c-format -msgid "%d minutes" -msgstr "%d хвилин" - -#: ../../common.pm:1 -#, c-format -msgid "TB" -msgstr "Тб" - -#: ../../common.pm:1 -#, c-format -msgid "GB" -msgstr "╫б" - -#: ../../common.pm:1 -#, c-format -msgid "MB" -msgstr "Мб" - -#: ../../common.pm:1 -#, c-format -msgid "KB" -msgstr "кб" - -#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 -#, c-format -msgid "United States" -msgstr "Сполучен╕ штати" - -#: ../../crypto.pm:1 ../../lang.pm:1 -#, fuzzy, c-format -msgid "Austria" -msgstr "посл╕довний" - -#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 -#: ../../standalone/drakxtv:1 -#, fuzzy, c-format -msgid "Italy" -msgstr "╤тал╕йська" - -#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 -#, c-format -msgid "Netherlands" -msgstr "Голанд╕я" - -#: ../../crypto.pm:1 ../../lang.pm:1 -#, fuzzy, c-format -msgid "Sweden" -msgstr "Дивись" - -#: ../../crypto.pm:1 ../../lang.pm:1 -#, fuzzy, c-format -msgid "Norway" -msgstr "Норвезька" - -#: ../../crypto.pm:1 ../../lang.pm:1 -#, fuzzy, c-format -msgid "Greece" -msgstr "Грецька" - -#: ../../crypto.pm:1 ../../lang.pm:1 -#, c-format -msgid "Germany" -msgstr "Н╕меччина" - -#: ../../crypto.pm:1 ../../lang.pm:1 -#, c-format -msgid "Czech Republic" -msgstr "Чешська республ╕ка" - -#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 -#, fuzzy, c-format -msgid "Belgium" -msgstr "Бельг╕йська" - -#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 -#, c-format -msgid "France" -msgstr "Франц╕я" - -#: ../../crypto.pm:1 ../../lang.pm:1 -#, c-format -msgid "Costa Rica" -msgstr "Коста-Р╕ка" - -#: ../../fsedit.pm:1 -#, c-format -msgid "Error opening %s for writing: %s" -msgstr "Не можу в╕дкрити %s на запис: %s" - -#: ../../fsedit.pm:1 -#, c-format -msgid "Nothing to do" -msgstr "" - -#: ../../fsedit.pm:1 -#, fuzzy, c-format -msgid "Not enough free space for auto-allocating" -msgstr "Недостатньо в╕льного простору для автоматичного под╕лу" - -#: ../../fsedit.pm:1 -#, fuzzy, c-format -msgid "You can't use an encrypted file system for mount point %s" -msgstr "Для точки монтування %s не можна користуватися лог╕чним томом LVM" - -#: ../../fsedit.pm:1 -#, fuzzy, c-format -msgid "" -"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " -"point\n" -msgstr "" -"Для ц╕╓╖ точки монтування Вам потр╕бна справжня файлова система (ext2,\n" -"reiserfs)\n" - -#: ../../fsedit.pm:1 -#, c-format -msgid "This directory should remain within the root filesystem" -msgstr "Цей каталог ма╓ знаходитись на коренев╕й файлов╕й систем╕" - -#: ../../fsedit.pm:1 -#, c-format -msgid "You can't use a LVM Logical Volume for mount point %s" -msgstr "Для точки монтування %s не можна користуватися лог╕чним томом LVM" - -#: ../../fsedit.pm:1 -#, fuzzy, c-format -msgid "" -"You've selected a software RAID partition as root (/).\n" -"No bootloader is able to handle this without a /boot partition.\n" -"Please be sure to add a /boot partition" -msgstr "" -"В якост╕ п╕дрозд╕ла для root (/) ви вибрали програмний RAID.\n" -"Завантажувач╕ не мжоуть працювати з такими п╕дрозд╕лами без п╕дрозд╕лу\n" -"/boot. Тож, будь-ласка, не забудьте додати п╕дрозд╕л /boot." - -#: ../../fsedit.pm:1 -#, c-format -msgid "There is already a partition with mount point %s\n" -msgstr "Вже ╓ п╕дрозд╕л з точкою монтування %s\n" - -#: ../../fsedit.pm:1 -#, fuzzy, c-format -msgid "Mount points should contain only alphanumerical characters" -msgstr "" -"Назва принтера ма╓ складатися т╕льки з л╕тер, цифр та символа п╕дкреслення." - -#: ../../fsedit.pm:1 -#, c-format -msgid "Mount points must begin with a leading /" -msgstr "Точка монтування повинна починатися з /" - -#: ../../fsedit.pm:1 -#, c-format -msgid "You can't use ReiserFS for partitions smaller than 32MB" -msgstr "ReiserFS не можна користуватися на п╕дрозд╕лах розм╕ром менше 32Мб." - -#: ../../fsedit.pm:1 -#, c-format -msgid "You can't use JFS for partitions smaller than 16MB" -msgstr "JFS не можна користуватися на п╕дрозд╕лах розм╕ром менше 16Мб." - -#: ../../fsedit.pm:1 -#, fuzzy, c-format -msgid "" -"I can't read the partition table of device %s, it's too corrupted for me :(\n" -"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" -"The other solution is to not allow DrakX to modify the partition table.\n" -"(the error is %s)\n" -"\n" -"Do you agree to loose all the partitions?\n" -msgstr "" -"Не можу прочитати таблицю п╕дрозд╕л╕в, вона занадто з╕псована для мене\n" -":( Я спробую стерти з╕псован╕ п╕дрозд╕ли ╕ ВС╤ ДАН╤ будуть\n" -"втрачен╕. Проблем╕ можна також запоб╕гти, якщо заборонити DrakX\n" -"зм╕нювати таблицю п╕дрозд╕л╕в. (помилка: %s)\n" -"\n" -"Ви погоджу╓тесь втратити вс╕ п╕дрозд╕ли?\n" - -#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1 -#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1 -#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 -#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1 -#: ../../standalone/drakboot:1 ../../standalone/draksplash:1 -#, c-format -msgid "Error" -msgstr "Помилка" - -#: ../../fsedit.pm:1 -#, c-format -msgid "server" -msgstr "сервер" - -#: ../../fsedit.pm:1 -#, c-format -msgid "with /usr" -msgstr "" - -#: ../../fsedit.pm:1 -#, c-format -msgid "simple" -msgstr "простий" - -#: ../../fs.pm:1 -#, fuzzy, c-format -msgid "Enabling swap partition %s" -msgstr "Форматування п╕дрозд╕лу %s" - -#: ../../fs.pm:1 ../../partition_table.pm:1 -#, c-format -msgid "error unmounting %s: %s" -msgstr "помилка розмонтування %s: %s" - -#: ../../fs.pm:1 -#, c-format -msgid "mounting partition %s in directory %s failed" -msgstr "" - -#: ../../fs.pm:1 -#, fuzzy, c-format -msgid "Mounting partition %s" -msgstr "Форматування п╕дрозд╕лу %s" - -#: ../../fs.pm:1 -#, fuzzy, c-format -msgid "Checking %s" -msgstr "Видалення LPD..." - -#: ../../fs.pm:1 -#, c-format -msgid "Formatting partition %s" -msgstr "Форматування п╕дрозд╕лу %s" - -#: ../../fs.pm:1 -#, c-format -msgid "Creating and formatting file %s" -msgstr "Створюю та форматую файл %s" - -#: ../../fs.pm:1 -#, c-format -msgid "I don't know how to format %s in type %s" -msgstr "Не знаю як форматувати %s типу %s" - -#: ../../fs.pm:1 -#, c-format -msgid "%s formatting of %s failed" -msgstr "%s форматування %s втрачено" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"Click on \"Next ->\" if you want to delete all data and partitions present\n" -"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n" -"be able to recover any data and partitions present on this hard drive,\n" -"including any Windows data.\n" -"\n" -"Click on \"<- Previous\" to stop this operation without losing any data and\n" -"partitions present on this hard drive." -msgstr "" -"Клацн╕ть на кнопц╕ \"Гаразд\", якщо ви хочете стерти вс╕ дан╕ та\n" -"п╕дрозд╕ли на цьому жорсткому диску. Будьте уважн╕: п╕сля того, як Ви\n" -"натиснете на \"Гаразд\" ви не зможете в╕дновити жодн╕ дан╕ чи\n" -"п╕дрозд╕ли, як╕ маються на цьому диску, включаючи також ╕ дан╕\n" -"В╕ндовс.\n" -"\n" -"Якщо Ви вир╕шили в╕дм╕нити цю операц╕ю, натисн╕ть клав╕шу\n" -"В╕дм╕нити. П╕дрозд╕ли ╕ дан╕ на диску залишаться без зм╕н." - -#: ../../help.pm:1 -#, c-format -msgid "" -"Choose the hard drive you want to erase in order to install your new\n" -"Mandrake Linux partition. Be careful, all data present on it will be lost\n" -"and will not be recoverable!" -msgstr "" -"Вибер╕ть жорсткий диск, який ви хочете переформатувати щоб встановити\n" -"новий п╕дрозд╕л для Мандрейк Л╕накса. Будьте уважн╕, оск╕льки вс╕ дан╕\n" -"будуть знищен╕, ╕ в╕дновити ╖х буде неможливо!" - -#: ../../help.pm:1 -#, c-format -msgid "" -"As a review, DrakX will present a summary of various information it has\n" -"about your system. Depending on your installed hardware, you may have some\n" -"or all of the following entries. Each entry is made up of the configuration\n" -"item to be configured, followed by a quick summary of the current\n" -"configuration. Click on the corresponding \"Configure\" button to change\n" -"that.\n" -"\n" -" * \"Keyboard\": check the current keyboard map configuration and change\n" -"that if necessary.\n" -"\n" -" * \"Country\": check the current country selection. If you are not in this\n" -"country, click on the \"Configure\" button and choose another one. If your\n" -"country is not in the first list shown, click the \"More\" button to get\n" -"the complete country list.\n" -"\n" -" * \"Timezone\": By default, DrakX deduces your time zone based on the\n" -"country you have chosen. You can click on the \"Configure\" button here if\n" -"this is not correct.\n" -"\n" -" * \"Mouse\": check the current mouse configuration and click on the button\n" -"to change it if necessary.\n" -"\n" -" * \"Printer\": clicking on the \"Configure\" button will open the printer\n" -"configuration wizard. Consult the corresponding chapter of the ``Starter\n" -"Guide'' for more information on how to setup a new printer. The interface\n" -"presented there is similar to the one used during installation.\n" -"\n" -" * \"Sound card\": if a sound card is detected on your system, it is\n" -"displayed here. If you notice the sound card displayed is not the one that\n" -"is actually present on your system, you can click on the button and choose\n" -"another driver.\n" -"\n" -" * \"Graphical Interface\": by default, DrakX configures your graphical\n" -"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n" -"you, click on \"Configure\" to reconfigure your graphical interface.\n" -"\n" -" * \"TV card\": if a TV card is detected on your system, it is displayed\n" -"here. If you have a TV card and it is not detected, click on \"Configure\"\n" -"to try to configure it manually.\n" -"\n" -" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n" -"displayed here. You can click on \"Configure\" to change the parameters\n" -"associated with the card.\n" -"\n" -" * \"Network\": If you want to configure your Internet or local network\n" -"access now.\n" -"\n" -" * \"Security Level\": this entry offers you to redefine the security level\n" -"as set in a previous step ().\n" -"\n" -" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n" -"a good idea to protect you from intrusions by setting up a firewall.\n" -"Consult the corresponding section of the ``Starter Guide'' for details\n" -"about firewall settings.\n" -"\n" -" * \"Bootloader\": if you wish to change your bootloader configuration,\n" -"click that button. This should be reserved to advanced users.\n" -"\n" -" * \"Services\": you'll be able here to control finely which services will\n" -"be run on your machine. If you plan to use this machine as a server it's a\n" -"good idea to review this setup." -msgstr "" - -#: ../../help.pm:1 -#, c-format -msgid "" -"\"Sound card\": if a sound card is detected on your system, it is displayed\n" -"here. If you notice the sound card displayed is not the one that is\n" -"actually present on your system, you can click on the button and choose\n" -"another driver." -msgstr "" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n" -"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n" -"detected and installed in the bootloader menu. If this is not the case, you\n" -"can add an entry by hand in this screen. Be careful to choose the correct\n" -"parameters.\n" -"\n" -"Yaboot's main options are:\n" -"\n" -" * Init Message: a simple text message displayed before the boot prompt.\n" -"\n" -" * Boot Device: indicates where you want to place the information required\n" -"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n" -"to hold this information.\n" -"\n" -" * Open Firmware Delay: unlike LILO, there are two delays available with\n" -"yaboot. The first delay is measured in seconds and at this point, you can\n" -"choose between CD, OF boot, MacOS or Linux;\n" -"\n" -" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" -"After selecting Linux, you will have this delay in 0.1 second before your\n" -"default kernel description is selected;\n" -"\n" -" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n" -"at the first boot prompt.\n" -"\n" -" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n" -"Open Firmware at the first boot prompt.\n" -"\n" -" * Default OS: you can select which OS will boot by default when the Open\n" -"Firmware Delay expires." -msgstr "" -"Yaboot - це завантажувач системи для Мак╕нтош╕в Нового типу. В╕н може\n" -"завантажувати будь-яку ╕з систем: GNU/Linux, MacOS, MacOSX, якщо в╕н\n" -"встановлений в систем╕. В б╕льшост╕ випадк╕в ц╕ системи в╕рно\n" -"визначаються ╕ встановлюються. Якщо це не так - можете додати пункт\n" -"вручну на цьому екран╕. Будьте уважн╕ при вибор╕ коректний\n" -"параметр╕в. \n" -"\n" -"Основн╕ параметри Yaboot:\n" -"\n" -" * Пов╕домлення при завантаженн╕: просте текстове пов╕домлення, яке\n" -"демонстру╓ться перед завантаженням.\n" -"\n" -" * Пристр╕й завантаження: вказу╓ на те, де саме запису╓ться\n" -"╕нформац╕я потр╕бна для завантаження GNU/Linux. Загалом, вам потр╕бно\n" -"назначити завантажувальний п╕дрозд╕л для того, щоб збер╕гати цю\n" -"╕нформац╕ю. \n" -"\n" -" * Затримка Open Firmware: на в╕дм╕ну в╕д Lilo, тут ╓ дв╕ р╕зних\n" -"пер╕оди затримки в Yaboot. Перший пер╕од затримки вим╕рю╓ться в\n" -"секундах. П╕д час цього пер╕оду затримки ви можете вибрати зв╕дки\n" -"завантажуватися: з компакт-диску, OF, MacOS чи Л╕накс.\n" -"\n" -" * Пер╕од затримки перед завантаженням ядра: цей пер╕од под╕бний до\n" -"затримки Lilo. П╕сля вибору Л╕накса, затримка обчислю╓ться в десятих\n" -"секунди перш, н╕ж почне завантажуватися стандартне ядро.\n" -"\n" -" * Дозволити завантаження з компакт-диску?: якщо цей параметр\n" -"вибрано, ви можете натиснути 'C' при завантаженн╕ п╕д час першого\n" -"пер╕оду затримки.\n" -"\n" -" * Дозволити завантаження OF: якщо ви виберете цей параметр, ви\n" -"зможете натиснути 'N' п╕д час першого пер╕оду затримки для\n" -"завантаження з Open Firmware.\n" -"\n" -" * Стандартна ОС: цим ви можете встановити стандартну систему, яка\n" -"завантажиться п╕сля того, як зак╕нчиться затримка Open Firmware." - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"You can add additional entries in yaboot for other operating systems,\n" -"alternate kernels, or for an emergency boot image.\n" -"\n" -"For other OSs, the entry consists only of a label and the \"root\"\n" -"partition.\n" -"\n" -"For Linux, there are a few possible options:\n" -"\n" -" * Label: this is the name you will have to type at the yaboot prompt to\n" -"select this boot option.\n" -"\n" -" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n" -"or a variation of vmlinux with an extension.\n" -"\n" -" * Root: the \"root\" device or ``/'' for your Linux installation.\n" -"\n" -" * Append: on Apple hardware, the kernel append option is often used to\n" -"assist in initializing video hardware, or to enable keyboard mouse button\n" -"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n" -"The following are some examples:\n" -"\n" -" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" -"hda=autotune\n" -"\n" -" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" -"\n" -" * Initrd: this option can be used either to load initial modules before\n" -"the boot device is available, or to load a ramdisk image for an emergency\n" -"boot situation.\n" -"\n" -" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n" -"need to allocate a large ramdisk, this option can be used to specify a\n" -"ramdisk larger than the default.\n" -"\n" -" * Read-write: normally the \"root\" partition is initially mounted as\n" -"read-only, to allow a file system check before the system becomes ``live''.\n" -"You can override the default with this option.\n" -"\n" -" * NoVideo: should the Apple video hardware prove to be exceptionally\n" -"problematic, you can select this option to boot in ``novideo'' mode, with\n" -"native frame buffer support.\n" -"\n" -" * Default: selects this entry as being the default Linux selection,\n" -"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n" -"highlighted with a ``*'' if you press [Tab] to see the boot selections." -msgstr "" -"Можете додати додатков╕ пункти для yaboot, або для операц╕йних систем,\n" -"╕нших ядер чи для авар╕йного образу завантаження.\n" -"\n" -"Для ╕нших ОС - пункт склада╓ться т╕льки з етикетки та п╕дрозд╕лу для\n" -"коренево╖ файлово╖ системи.\n" -"\n" -"Для Л╕накса ╓ к╕лька можливих параметр╕в: \n" -"\n" -" * Етикетка: це просто назва, яку ви ма╓те надрукувати при запрошенн╕\n" -"yaboot, щоб вибрати цю опц╕ю завантаження.\n" -"\n" -" * Образ: це - назва ядра для завантаження. У б╕льшост╕ випадк╕в - це\n" -"vmlinux або вар╕анти назви з р╕зними розширеннями.\n" -"\n" -" * Коренева файлова система: пристр╕й для коренево╖ файлово╖ системи,\n" -"або '/' вашо╖ системи Л╕накс.\n" -"\n" -"\n" -" * Додати: на апаратному забезпеченн╕ Apple досить часто\n" -"використовуються додатков╕ параметри для ╕н╕ц╕ал╕зац╕╖ в╕део-плати або\n" -"для того, щоб ╕н╕ц╕ал╕зувати клав╕атурну емуляц╕ю клав╕ш мишки, через\n" -"те, що на стандартн╕й мишц╕ Apple нема╓ 2-╖ ╕ 3-╖ клав╕ш╕. Дал╕ подан╕\n" -"деяк╕ приклади: \n" -"\n" -" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 " -"hda=autotune\n" -"\n" -" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" -"\n" -"\n" -" * Initrd: цей параметр може використовуватися для того, щоб\n" -"завантажувати модул╕ до того, як пристр╕й завантаження доступний, або\n" -"щоб прочитати в╕ртуальний диск для авар╕йного завантаження.\n" -"\n" -" * Розм╕р initrd: стандартний в╕ртуальний диск ма╓ розм╕р 4096 байт,\n" -"якщо вам потр╕бен диск б╕льшого розм╕ру, можете скористуватися цим\n" -"параметром.\n" -"\n" -" * Запис/читання: звично коренева файлова система монту╓ться в режим╕\n" -"т╕льки для читання, для того, щоб мати можлив╕сть провести перев╕рку\n" -"файлово╖ системи перш, н╕ж система завантажу╓ться в робочий режим. Це\n" -"можна в╕дм╕нити тут.\n" -"\n" -" * БезВ╕део: у випадку, коли в╕део плата Apple виявиться особливо\n" -"проблематичною, ви можете вибрати цей параметр для того, щоб\n" -"скористуватися стандартним framebuffer'ом.\n" -"\n" -" * Стандарна: система вибрана в цьому пункт╕ завантажиться зразу\n" -"п╕сля того, як ви натиснете ENTER на запрошенн╕ yaboot. Цей пункт буде\n" -"також показаний символом *, якщо ви натиснете TAB, щоб подивитися\n" -"список систем. " - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"DrakX will first detect any IDE devices present in your computer. It will\n" -"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" -"found, DrakX will automatically install the appropriate driver.\n" -"\n" -"Because hardware detection is not foolproof, DrakX may fail in detecting\n" -"your hard drives. If so, You'll have to specify your hardware by hand.\n" -"\n" -"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n" -"want to configure options for it. You should allow DrakX to probe the\n" -"hardware for the card-specific options which are needed to initialize the\n" -"adapter. Most of the time, DrakX will get through this step without any\n" -"issues.\n" -"\n" -"If DrakX is not able to probe for the options to automatically determine\n" -"which parameters need to be passed to the hardware, you'll need to manually\n" -"configure the driver." -msgstr "" -"DrakX спробу╓ в╕дшукати вс╕ жорстк╕ диски у систем╕ ╕ одночасно\n" -"в╕дшукати плати PCI SCSI. Якщо DrakX знайде плату SCSI ╕ зна╓ який\n" -"драйвер використовувати з ц╕╓ю платою, в╕н автоматично встановить цей\n" -"драйвер (ц╕ драйвери).\n" -"\n" -"В деяких випадках не вся апаратура розп╕зна╓ться повн╕стю. Якщо ви не\n" -"ма╓те плати SCSI, ма╓те ISA SCSI плату, або PCI SCSI плату, яка не\n" -"розп╕зна╓ться DrakX, Вам буде задане запитання, про те чи ╓ у Ваш╕й\n" -"систем╕ SCSI плата. Якщо тако╖ плати у Вас нема╓, просто клацн╕ть на\n" -"\"Н╕\". Якщо ви клацнете на \"Так\", Вам буде надано список драйвер╕в, з\n" -"якого Вам треба вибрати потр╕бний.\n" -"\n" -"Якщо Вам потр╕бно буде вручну вибирати драйвер, DrakX запита╓ у Вас,\n" -"чи ви хочете вказати як╕сь певн╕ опц╕╖ для драйвера. Краще, якщо Ви\n" -"дозволите DrakX випробувати плату, щоб визначити потр╕бн╕\n" -"опц╕╖. Звично це працю╓ нормально.\n" -"\n" -"Якщо це не спрацю╓, Вам сл╕д вказати потр╕бн╕ опц╕╖ для\n" -"драйвера. Перегляньте \"Пос╕бник по установц╕\" (Розд╕л 3, п╕дрозд╕л\n" -"\"Знаходження ╕нформац╕╖ про Вашу апаратуру\"), з документац╕╖ по\n" -"апаратному забезпеченню або з домашньо╖ стор╕нки виробника апаратури\n" -"або д╕знайтеся потр╕бн╕ параметри з Windows (якщо ви ма╓те цю систему\n" -"на сво╓му комп'ютер╕)." - -#: ../../help.pm:1 -#, c-format -msgid "" -"Now, it's time to select a printing system for your computer. Other OSs may\n" -"offer you one, but Mandrake Linux offers two. Each of the printing systems\n" -"is best for a particular type of configuration.\n" -"\n" -" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n" -"if you have a direct connection to your printer, you want to be able to\n" -"panic out of printer jams, and you do not have networked printers. (\"pdq\n" -"\" will handle only very simple network cases and is somewhat slow when\n" -"used with networks.) It's recommended that you use \"pdq\" if this is your\n" -"first experience with GNU/Linux.\n" -"\n" -" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n" -"printing to your local printer or to one halfway around the planet. It is\n" -"simple to configure and can act as a server or a client for the ancient\n" -"\"lpd \" printing system, so it compatible with older operating systems\n" -"that may still need print services. While quite powerful, the basic setup\n" -"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n" -"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n" -"front-ends for printing or choosing printer options and for managing the\n" -"printer.\n" -"\n" -"If you make a choice now, and later find that you don't like your printing\n" -"system you may change it by running PrinterDrake from the Mandrake Control\n" -"Center and clicking the expert button." -msgstr "" - -#: ../../help.pm:1 -#, c-format -msgid "" -"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n" -"automated. DrakX will analyze the disk boot sector and act according to\n" -"what it finds there:\n" -"\n" -" * if a Windows boot sector is found, it will replace it with a grub/LILO\n" -"boot sector. This way you will be able to load either GNU/Linux or another\n" -"OS.\n" -"\n" -" * if a grub or LILO boot sector is found, it will replace it with a new\n" -"one.\n" -"\n" -"If it cannot make a determination, DrakX will ask you where to place the\n" -"bootloader.\n" -"\n" -"\"Boot device\": in most cases, you will not change the default (\"First\n" -"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n" -"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n" -"(\"On Floppy\")." -msgstr "" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"After you have configured the general bootloader parameters, the list of\n" -"boot options that will be available at boot time will be displayed.\n" -"\n" -"If there are other operating systems installed on your machine they will\n" -"automatically be added to the boot menu. You can fine-tune the existing\n" -"options by clicking \"Add\" to create a new entry; selecting an entry and\n" -"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n" -"your changes.\n" -"\n" -"You may also not want to give access to these other operating systems to\n" -"anyone who goes to the console and reboots the machine. You can delete the\n" -"corresponding entries for the operating systems to remove them from the\n" -"bootloader menu, but you will need a boot disk in order to boot those other\n" -"operating systems!" -msgstr "" -"LILO (the LInux LOader - завантажувач Л╕накса) та Grub -- це\n" -"завантажувач╕ системи: вони можуть завантажити або GNU/Л╕накс або\n" -"будь-яку ╕ншу операц╕йну систему на Вашому комп'ютер╕. За нормальних\n" -"умов ц╕ операц╕йн╕ системи в╕рно визначаються та встановлюються. Якщо\n" -"це не так, ви можете додати потр╕бний пункт самост╕йно. Уважно\n" -"вибер╕ть потр╕бн╕ параметри.\n" -"\n" -"\n" -"Ви, можливо, також захочете закрити доступ до цих операц╕йних систем\n" -"╕ншим, в цьому випадку ви можете стерти в╕дпов╕дн╕ пункти в файл╕\n" -"конф╕╜урац╕╖. Але в цьому випадку Вам потр╕бна буде спец╕альна\n" -"дискета, щоб завантажити ц╕ системи!" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"This dialog allows to finely tune your bootloader:\n" -"\n" -" * \"Bootloader to use\": there are three choices for your bootloader:\n" -"\n" -" * \"GRUB\": if you prefer grub (text menu).\n" -"\n" -" * \"LILO with text menu\": if you prefer LILO with its text menu\n" -"interface.\n" -"\n" -" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n" -"interface.\n" -"\n" -" * \"Boot device\": in most cases, you will not change the default\n" -"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n" -"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n" -"\n" -" * \"Delay before booting the default image\": after a boot or a reboot of\n" -"the computer, this is the delay given to the user at the console to select\n" -"a boot entry other than the default.\n" -"\n" -"!! Beware that if you choose not to install a bootloader (by selecting\n" -"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n" -"system! Be sure you know what you do before changing any of the options. !!\n" -"\n" -"Clicking the \"Advanced\" button in this dialog will offer advanced options\n" -"that are reserved for the expert user." -msgstr "" -"LILO ╕ GRUB - це завантажувач╕ системи для GNU/Linux. Цей крок звично\n" -"повн╕стю автоматизований. Фактично, drakX проведе анал╕з\n" -"завантажувального сектора диску ╕ буде д╕яти в╕дпов╕дно до того, що в\n" -"ньому виявиться:\n" -"\n" -" * якщо тут присутн╕й завантажувальний сектор Windows, в╕н зам╕нить\n" -"його на сектор GRUB/LILO таким чином, щоб Ви могли стартувати обо╓ - ╕\n" -"GNU/Linux, ╕ Windows;\n" -"\n" -" * якщо знайдений блок в╕д GRUB чи LILO, в╕н буде зам╕нений на новий. \n" -"\n" -"Якщо ситуац╕я не така ч╕тка, drakX запропону╓ Вам виб╕р з к╕лькома\n" -"можливими виходами. \n" -"\n" -" * Який завантажувач вживати: Ви ма╓те три вар╕анти на виб╕р:\n" -" \n" -" * LILO з граф╕чним меню: якщо Ви нада╓те перевагу LILO з його\n" -" граф╕чною оболонкою.\n" -"\n" -" * Grub: якщо Вам подоба╓ться Grub (з текстовим меню).\n" -"\n" -" * LILO з текстовим меню: якщо Вам подоба╓ться LILO з текстовим\n" -" меню.\n" -"\n" -" * Пристр╕й завантаження: у б╕льшост╕ випадк╕в Вам не потр╕бно буде\n" -"зм╕нювати неявно встановлений диск (/dev/hda), але якщо Вам потр╕бно,\n" -"Ви можете встановити завантажувач на другому жорсткому диску\n" -"(/dev/hdb) чи нав╕ть на дискет╕ (/de/fd0). \n" -"\n" -" * Затримка перед завантаженням основного ядра: це затримка при\n" -"завантаженн╕ системи, яка нада╓ться користувачев╕, щоб в╕н мав\n" -"можлив╕сть вибрати ╕нший пункт в меню завантажувача.\n" -"\n" -"!! Будьте уважними: якщо Ви натиснете кнопку \"В╕дм╕нити\" (╕ тим самим\n" -"вкажете програм╕ не встановлювати системного завантажувача),\n" -"пересв╕дч╕ться, що Ви ма╓те у запас╕ метод для завантаження системи\n" -"Мандрейк Л╕накс! Будьте також певними, що Ви добре зна╓те, що Ви\n" -"робити, коли Ви зм╕ню╓те будь-як╕ параметри тут!!\n" -"\n" -"Натиснувши кнопку \"Додатково\" в цьому в╕кн╕, Ви отрима╓те доступ до\n" -"багатьох додаткових конф╕╜урац╕йних параметр╕в призначених для\n" -"досв╕дчених користувач╕в.\n" -"\n" -"Мандрейк Л╕накс встановлю╓ св╕й власний системний завантажувач, який\n" -"дозволить Вам завантажувати або GNU/Linux, або будь-яку ╕ншу\n" -"операц╕йну систему, встановлену на ц╕й машин╕.\n" -"\n" -"Якщо на машин╕ встановлена ╕нша операц╕йна система, вона автоматично\n" -"буде додана до списку систем в меню. Тут можна зм╕нити ╕снуюч╕\n" -"параметри для завантаження кожно╖ системи. Подв╕йне клацання на пункт╕\n" -"меню дозволить Вам зм╕нити ╕снуюч╕ параметри, або стерти даний пункт\n" -"меню. \"Додати\" створюж новий пункт. ╤ \"Зак╕нчено\" переходить на\n" -"наступний крок установки." - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"This is the most crucial decision point for the security of your GNU/Linux\n" -"system: you have to enter the \"root\" password. \"Root\" is the system\n" -"administrator and is the only one authorized to make updates, add users,\n" -"change the overall system configuration, and so on. In short, \"root\" can\n" -"do everything! That is why you must choose a password that is difficult to\n" -"guess - DrakX will tell you if the password that you chose too easy. As you\n" -"can see, you are not forced to enter a password, but we strongly advise you\n" -"against. GNU/Linux is as prone to operator error as any other operating\n" -"system. Since \"root\" can overcome all limitations and unintentionally\n" -"erase all data on partitions by carelessly accessing the partitions\n" -"themselves, it is important that it be difficult to become \"root\".\n" -"\n" -"The password should be a mixture of alphanumeric characters and at least 8\n" -"characters long. Never write down the \"root\" password -- it makes it too\n" -"easy to compromise a system.\n" -"\n" -"One caveat -- do not make the password too long or complicated because you\n" -"must be able to remember it!\n" -"\n" -"The password will not be displayed on screen as you type it in. To reduce\n" -"the chance of a blind typing error you will need to enter the password\n" -"twice. If you do happen to make the same typing error twice, this\n" -"``incorrect'' password will have to be used the first time you connect.\n" -"\n" -"If you wish access to this computer to be controlled by an authentication\n" -"server, click the \"Advanced\" button.\n" -"\n" -"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" -"services, select the appropriate one as \"authentication\". If you do not\n" -"know which to use, ask your network administrator.\n" -"\n" -"If you happen to have problems with reminding passwords, you can choose to\n" -"have \"No password\", if your computer won't be connected to the Internet,\n" -"and if you trust anybody having access to it." -msgstr "" -"Наступне - найб╕льш вашливий крок з точки зору безпеки Вашо╖ системи\n" -"GNU/Linux: виб╕р пароля для користувача Root. Root - це системний\n" -"адм╕н╕стратор ╕ ╓дина особа, як╕й дозволено робити поновлення системи,\n" -"додавати користувач╕в, зм╕нювати загальну конф╕╜урац╕ю системи, таке\n" -"╕нше. Коротше - Root може все! Ось чому Вам сл╕д вибирати пароль, який\n" -"важко вгадати, drakX скаже Вам, якщо пароль занадто легкий. Як\n" -"показано, Вам необов'язково вводити пароль, але ми наст╕йливо\n" -"рекоменду╓мо Вам все-таки вибрати пароль, хоча б з одн╕╓╖-╓жино╖\n" -"причини: не думайте, що через те, що Ви завантажили GNU/Linux, Ваша\n" -"система в╕льна в╕д помилок. Це не так, оск╕льки Root може переважити\n" -"вс╕ заборони ╕ ненароком стерти вс╕ дан╕ на всих п╕дрозд╕лах\n" -"звертаючись безпосередньо до п╕дрозд╕л╕в! Тому, доступ до рахунку root\n" -"ма╓ бути захищеним.\n" -"\n" -"Пароль ма╓ бути сум╕шшю алфав╕тно-цифрових символ╕в ╕ бути завдовжки\n" -"хоча-б 8 символ╕в. Н╕коли не записуйте пароль!\n" -"\n" -"Не вибирайте занадто довгий чи складний пароль. Вам його\n" -"запам'ятовувати.\n" -"\n" -"Коли Ви будете друкувати пароль на екран╕, його не буде видно. Ось\n" -"чому при вибор╕ пароля, Вам запропону╓ться ввести його дв╕ч╕, оск╕льки\n" -"помилка при першому введенн╕ пароля, може бути проблемою: при\n" -"ре╓страц╕╖ в систем╕ Вам треба буде користуватись \"нев╕рним\" паролем.\n" -"\n" -"В експертному режим╕, у Вас буде можлив╕сть вказати, чи Ви будете\n" -"користуватися яким-небудь сервером автентикац╕╖: NIS чи LDAP.\n" -"\n" -"Якщо Ви користу╓тесь NIS'ом (чи LDAP) вибер╕ть опц╕ю \"Користуватись\n" -"NIS'ом\" (\"LDAP\"). Якщо Ви не зна╓те цього, запитайте в свого\n" -"системного адм╕н╕стратора.\n" -"\n" -"Якщо комп'ютер не п╕дключений до мереж╕, вибер╕ть Локальн╕ файли дли\n" -"автентикац╕╖.." - -#: ../../help.pm:1 -#, c-format -msgid "" -"Please select the correct port. For example, the \"COM1\" port under\n" -"Windows is named \"ttyS0\" under GNU/Linux." -msgstr "" -"Будь-ласка, вибер╕ть в╕рний порт. Наприклад, порт п╕д назвою COM1 у MS\n" -"Windows носить назву ttyS0 у GNU/Л╕накс╕." - -#: ../../help.pm:1 -#, c-format -msgid "" -"Usually, DrakX has no problems detecting the number of buttons on your\n" -"mouse. If it does, it assumes you have a two-button mouse and will\n" -"configure it for third-button emulation. The third-button mouse button of a\n" -"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n" -"right mouse buttons. DrakX will automatically know whether your mouse uses\n" -"a PS/2, serial or USB interface.\n" -"\n" -"If for some reason you wish to specify a different type of mouse, select it\n" -"from the provided list.\n" -"\n" -"If you choose a mouse other than the default, a test screen will be\n" -"displayed. Use the buttons and wheel to verify that the settings are\n" -"correct and that the mouse is working correctly. If the mouse is not\n" -"working well, press the space bar or [Return] key to cancel the test and to\n" -"go back to the list of choices.\n" -"\n" -"Wheel mice are occasionally not detected automatically, so you will need to\n" -"select your mouse from a list. Be sure to select the one corresponding to\n" -"the port that your mouse is attached to. After selecting a mouse and\n" -"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n" -"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n" -"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n" -"the buttons and check that the mouse pointer moves on-screen as you move\n" -"your mouse." -msgstr "" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"Your choice of preferred language will affect the language of the\n" -"documentation, the installer and the system in general. Select first the\n" -"region you are located in, and then the language you speak.\n" -"\n" -"Clicking on the \"Advanced\" button will allow you to select other\n" -"languages to be installed on your workstation, thereby installing the\n" -"language-specific files for system documentation and applications. For\n" -"example, if you will host users from Spain on your machine, select English\n" -"as the default language in the tree view and \"Espanol\" in the Advanced\n" -"section.\n" -"\n" -"Note that you're not limited to choosing a single additional language. You\n" -"may choose several ones, or even install them all by selecting the \"All\n" -"languages\" box. Selecting support for a language means translations,\n" -"fonts, spell checkers, etc. for that language will be installed.\n" -"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n" -"system to use unicode (UTF-8). Note however that this is an experimental\n" -"feature. If you select different languages requiring different encoding the\n" -"unicode support will be installed anyway.\n" -"\n" -"To switch between the various languages installed on the system, you can\n" -"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n" -"language used by the entire system. Running the command as a regular user\n" -"will only change the language settings for that particular user." -msgstr "" -"Будь ласка, вибер╕ть мову для установку системи та користування п╕сля\n" -"установки. \n" -"\n" -"Присутня також кнопка \"Додатково\", яка дозволя╓ Вам вибрати ╕нш╕ мови,\n" -"як╕ можуть бути також установленими в систем╕. Ви зможете\n" -"користуватися цими мовами п╕сля установки. Якщо, наприклад, на Ваш╕й\n" -"машин╕ (у яко╖ англ╕йська встановлена основною мовою) будуть працювати\n" -"╕спанц╕, вибер╕ть в додаткових мовах ╤спанська|╤спан╕я.\n" -"\n" -"П╕сля вибору мови ╕ п╕дтвердження, Ви автоматично переходите до\n" -"наступного кроку." - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"Depending on the default language you chose in Section , DrakX will\n" -"automatically select a particular type of keyboard configuration. However,\n" -"you might not have a keyboard that corresponds exactly to your language:\n" -"for example, if you are an English speaking Swiss person, you may have a\n" -"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n" -"find yourself in the same situation where your native language and keyboard\n" -"do not match. In either case, this installation step will allow you to\n" -"select an appropriate keyboard from a list.\n" -"\n" -"Click on the \"More \" button to be presented with the complete list of\n" -"supported keyboards.\n" -"\n" -"If you choose a keyboard layout based on a non-Latin alphabet, the next\n" -"dialog will allow you to choose the key binding that will switch the\n" -"keyboard between the Latin and non-Latin layouts." -msgstr "" -"Звично drakX вибира╓ в╕рну клав╕атуру (в залежност╕ в╕д мови, якою Ви\n" -"користу╓тесь) ╕ Ви не побачите цього кроку. Однак, можливо, Ви не\n" -"ма╓те клав╕атури, що точно в╕дпов╕да╓ Ваш╕й мов╕: наприклад, якщо Ви\n" -"агломовний швед, Ви все-одно можете забажати користуватись шведською\n" -"клав╕атурою. Або, якщо Ви говорите англ╕йською, але живете в Квебеку,\n" -"Ви потрапля╓те в анало╜╕чну ситуац╕ю. В обох випадках, Вам потр╕бно\n" -"повернутись до цього етапу установки ╕ вибрати в╕дпов╕дну клав╕атуру з\n" -"наданого списку. Все, що потр╕бно, це вибрати потр╕бну клав╕атуру ╕з\n" -"списку, що з'явля╓ться перед Вами.\n" -"\n" -"Натисн╕ть кнопку Додатково ╕ Ви побачите повний список розкладок\n" -"клав╕атур." - -#: ../../help.pm:1 -#, c-format -msgid "" -"This step is activated only if an old GNU/Linux partition has been found on\n" -"your machine.\n" -"\n" -"DrakX now needs to know if you want to perform a new install or an upgrade\n" -"of an existing Mandrake Linux system:\n" -"\n" -" * \"Install\": For the most part, this completely wipes out the old\n" -"system. If you wish to change how your hard drives are partitioned, or\n" -"change the file system, you should use this option. However, depending on\n" -"your partitioning scheme, you can prevent some of your existing data from\n" -"being over- written.\n" -"\n" -" * \"Upgrade\": this installation class allows you to update the packages\n" -"currently installed on your Mandrake Linux system. Your current\n" -"partitioning scheme and user data is not altered. Most of other\n" -"configuration steps remain available, similar to a standard installation.\n" -"\n" -"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n" -"running version \"8.1\" or later. Performing an Upgrade on versions prior\n" -"to Mandrake Linux version \"8.1\" is not recommended." -msgstr "" - -#: ../../help.pm:1 -#, c-format -msgid "" -"\"Country\": check the current country selection. If you are not in this\n" -"country, click on the \"Configure\" button and choose another one. If your\n" -"country is not in the first list shown, click the \"More\" button to get\n" -"the complete country list." -msgstr "" - -#: ../../help.pm:1 -#, c-format -msgid "" -"More than one Microsoft partition has been detected on your hard drive.\n" -"Please choose the one you want to resize in order to install your new\n" -"Mandrake Linux operating system.\n" -"\n" -"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" -"\"Capacity\".\n" -"\n" -"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" -"\"partition number\" (for example, \"hda1\").\n" -"\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" -"\"sd\" if it is a SCSI hard drive.\n" -"\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" -"hard drives:\n" -"\n" -" * \"a\" means \"master hard drive on the primary IDE controller\";\n" -"\n" -" * \"b\" means \"slave hard drive on the primary IDE controller\";\n" -"\n" -" * \"c\" means \"master hard drive on the secondary IDE controller\";\n" -"\n" -" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" -"\n" -"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" -"\"second lowest SCSI ID\", etc.\n" -"\n" -"\"Windows name\" is the letter of your hard drive under Windows (the first\n" -"disk or partition is called \"C:\")." -msgstr "" -"На Вашому диску знайдено б╕льше одного п╕дрозд╕ла, що належать\n" -"операц╕йн╕й систем╕ В╕ндовс. Вибер╕ть, будь-ласка, один з них, розм╕р\n" -"якого би ви хот╕ли зм╕нити, для того щоб встановити операц╕йну систему\n" -"Мандрейк Л╕накс.\n" -"\n" -"Кожен п╕дрозд╕л подано в такому вигляд╕: \"Назва в Л╕накс╕\", \"Назва у\n" -"В╕ндовс\", \"Розм╕р\".\n" -"\n" -"\"Назва в Л╕накс╕\" закодована таким чином: \"тип жорсткого диску\",\n" -"\"номер жорсткого диску\", \"номер п╕дрозд╕лу на диску\", (Наприклад:\n" -"\"hda1\").\n" -"\n" -"Тип жорсткого диску\" - це \"hd\", якщо ви ма╓те диск типу IDE, ╕ \"sd\",\n" -"якщо ви ма╓те жорсткий диск типу SCSI.\n" -"\n" -"\"Номер жорского диску\" - це завжди л╕тера п╕сля \"hd\" чи \"sd\". Для\n" -"диск╕в типу IDE це:\n" -"\n" -" * \"a\" - головний диск (master) на першому контролер╕ IDE,\n" -"\n" -" * \"b\" - вторинний (slave) диск на першому контролер╕ IDE,\n" -"\n" -" * \"c\" - головний диск на другому контролер╕ IDE,\n" -"\n" -" * \"d\" - вторинний диск на другому контролер╕ IDE.\n" -"\n" -"Для SCSI диск╕в \"a\" означа╓ \"головний диск\", \"b\" - другорядний диск, " -"╕\n" -"т.д. ...\n" -"\n" -"\"Назва у В╕ндовс\" - це л╕тера Вашого жорсткого диску, як ви ╖╖ бачите\n" -"при робот╕ у В╕ндовс (перший диск чи п╕дрозд╕л назива╓ться \"C:\")." - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"At this point, you need to choose which partition(s) will be used for the\n" -"installation of your Mandrake Linux system. If partitions have already been\n" -"defined, either from a previous installation of GNU/Linux or from another\n" -"partitioning tool, you can use existing partitions. Otherwise, hard drive\n" -"partitions must be defined.\n" -"\n" -"To create partitions, you must first select a hard drive. You can select\n" -"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" -"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" -"\n" -"To partition the selected hard drive, you can use these options:\n" -"\n" -" * \"Clear all\": this option deletes all partitions on the selected hard\n" -"drive\n" -"\n" -" * \"Auto allocate\": this option enables you to automatically create ext3\n" -"and swap partitions in free space of your hard drive\n" -"\n" -"\"More\": gives access to additional features:\n" -"\n" -" * \"Save partition table\": saves the partition table to a floppy. Useful\n" -"for later partition-table recovery, if necessary. It is strongly\n" -"recommended that you perform this step.\n" -"\n" -" * \"Restore partition table\": allows you to restore a previously saved\n" -"partition table from a floppy disk.\n" -"\n" -" * \"Rescue partition table\": if your partition table is damaged, you can\n" -"try to recover it using this option. Please be careful and remember that it\n" -"doesn't always work.\n" -"\n" -" * \"Reload partition table\": discards all changes and reloads the\n" -"partition table that was originally on the hard drive.\n" -"\n" -" * \"Removable media automounting\": unchecking this option will force\n" -"users to manually mount and unmount removable medias such as floppies and\n" -"CD-ROMs.\n" -"\n" -" * \"Wizard\": use this option if you wish to use a wizard to partition\n" -"your hard drive. This is recommended if you do not have a good\n" -"understanding of partitioning.\n" -"\n" -" * \"Undo\": use this option to cancel your changes.\n" -"\n" -" * \"Toggle to normal/expert mode\": allows additional actions on\n" -"partitions (type, options, format) and gives more information about the\n" -"hard drive.\n" -"\n" -" * \"Done\": when you are finished partitioning your hard drive, this will\n" -"save your changes back to disk.\n" -"\n" -"When defining the size of a partition, you can finely set the partition\n" -"size by using the Arrow keys of your keyboard.\n" -"\n" -"Note: you can reach any option using the keyboard. Navigate through the\n" -"partitions using [Tab] and the [Up/Down] arrows.\n" -"\n" -"When a partition is selected, you can use:\n" -"\n" -" * Ctrl-c to create a new partition (when an empty partition is selected)\n" -"\n" -" * Ctrl-d to delete a partition\n" -"\n" -" * Ctrl-m to set the mount point\n" -"\n" -"To get information about the different file system types available, please\n" -"read the ext2FS chapter from the ``Reference Manual''.\n" -"\n" -"If you are installing on a PPC machine, you will want to create a small HFS\n" -"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" -"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" -"may find it a useful place to store a spare kernel and ramdisk images for\n" -"emergency boot situations." -msgstr "" -"Зараз Вам потр╕бно вибрати, як╕ п╕дрозд╕ли використовувати для Вашо╖\n" -"ново╖ системи Л╕накс Мандрейк. Якщо ц╕ п╕дрозд╕ли вже були визначен╕\n" -"(в╕д попередньо╖ установки системи GNU/Linux або створен╕ ╕ншою\n" -"програмою розпод╕лу диску), ви можете скористатися вже готовими\n" -"п╕дрозд╕лами. В ╕ншому випадку, п╕дрозд╕ли на жорсткому диску мають\n" -"бути визначеними перш, н╕ж переходити до установки.\n" -"\n" -"Для створення п╕дрозд╕л╕в ви спершу ма╓те вибрати жорсткий диск. Ви\n" -"можете вибрати диск клацнувши на \"hda\" (якщо мова йде про перший диск\n" -"типи IDE), або на \"hdb\" (для другого диску в систем╕ типу IDE), або на\n" -"\"sda\", якщо ви будете встановлювати систему на першому диску типу SCSI\n" -"╕ так дал╕.\n" -"\n" -"Щоб розпод╕лити диск на розд╕ли, ви можете скористатися цими пунктами меню:\n" -"\n" -"* Очистити все: цей пункт стира╓ вс╕ п╕дрозд╕ли на вибраному жорсткому " -"диску.\n" -"\n" -"* Розпод╕лити автоматично: цей пункт меню допоможе Вам автоматично\n" -"створити п╕дрозд╕л типу Ext2 та swap на в╕льному простор╕ диску.\n" -"\n" -"* В╕дновити таблицю п╕дрозд╕л╕в: якщо таблиця п╕дрозд╕л╕в Вашого диску\n" -"з╕псована, ви можете спершу спробувати в╕дновити ╖╖ скористувавшись\n" -"цим пунктом. Будь-ласка, будьте-обережними, ╕ пам'ятайте, що цей пункт\n" -"не завжди спрацьову╓.\n" -"\n" -"* Повернутись: Можете скористуватись цим, щоб в╕дмовитись в╕д зм╕н,\n" -"внесених вами.\n" -"\n" -"* Перечитати: Можете скористуватись цим, щоб в╕дмовитись в╕д зм╕н,\n" -"внесених вами ╕ перепрочитати ори╜╕нальну таблицю п╕дрозд╕л╕в.\n" -"\n" -"\n" -"* Пом╕чник: Якщо ви хочете скористатись пом╕чником для розпод╕лу\n" -"диску. Рекомендований режим, якщо ви не ма╓те глибоких знань про\n" -"розпод╕л диску. \n" -"\n" -"* В╕дновити з гнучкого диску: Якщо ви записали попередньо свою таблицю\n" -"п╕дрозд╕л╕в на гнучкий диск. Зараз ви можете в╕дновити цю таблицю з\n" -"гнучкого диску.\n" -"\n" -"* Записати на гнучкий диск: Якщо ви хочете записати зараз таблицю\n" -"п╕дрозд╕л╕в на гнучкий диск для того, щоб ╖╖ пот╕м можна було\n" -"в╕дновити з дискети. Дуже рекоменду╓мо скористуватися цим режимом. \n" -"\n" -"* Готово: П╕сля того, як ви вже зак╕нчили з перерозпод╕лом Вашого\n" -"жорсткого диску, скористайтесь цим пунктом, щоб записати зм╕ни на\n" -"диск. \n" -"\n" -"Коли певний п╕дрозд╕л вибрано, можете скористуватись клав╕шами:\n" -"\n" -" * Ctrl-c щоб створити новий п╕дрозд╕л (якщо вибрано пустий " -"п╕дрозд╕л)\n" -"\n" -" * Ctrl-d щоб стерти п╕дрозд╕л\n" -"\n" -" * Ctrl-m щоб визначити точку монтування\n" -"\n" -"Якщо ви встановлю╓те систему на комп'ютер з процесором PPC, ви можете\n" -"створити маленький п╕дрозд╕л типу HFS для завантаження 'bootstrap'\n" -"(розм╕ром не менше 1Мб для завантажувача yaboot. Якщо ви вир╕шите\n" -"створити п╕дрозд╕л трохи б╕льшого розм╕ру (скаж╕мо 50Мб, ви зможете\n" -"також збер╕гати на ньому резервне ядро системи та в╕ртуальний диск для\n" -"авар╕йних завантажень системи). " - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"At this point, DrakX will allow you to choose the security level desired\n" -"for the machine. As a rule of thumb, the security level should be set\n" -"higher if the machine will contain crucial data, or if it will be a machine\n" -"directly exposed to the Internet. The trade-off of a higher security level\n" -"is generally obtained at the expense of ease of use.\n" -"\n" -"If you do not know what to choose, keep the default option." -msgstr "" -"Тепер час вибрати р╕вень доступу (безпеки) для Вашо╖ системи. Золоте\n" -"правило: чим ширше коло доступу ма╓ машина, ╕ чим важлив╕ш╕ дан╕, що в\n" -"н╕й збер╕гаються, тим вищим ма╓ бути р╕вень безпеки системи. Але в\n" -"б╕льшост╕ випадк╕в, вищий р╕вень безпеки досяга╓ться за рахунок\n" -"додаткових незручностей в користуванн╕. Додаткову ╕нформац╕ю з цього\n" -"питання можна отримати з секц╕╖ MSEC в Дов╕дковому Пос╕бнику.\n" -"\n" -"Якщо Ви не зна╓те, на чому зупинитись, залиште все як ╓." - -#: ../../help.pm:1 -#, c-format -msgid "" -"At the time you are installing Mandrake Linux, it is likely that some\n" -"packages have been updated since the initial release. Bugs may have been\n" -"fixed, security issues resolved. To allow you to benefit from these\n" -"updates, you are now able to download them from the Internet. Check \"Yes\"\n" -"if you have a working Internet connection, or \"No\" if you prefer to\n" -"install updated packages later.\n" -"\n" -"Choosing \"Yes\" will display a list of places from which updates can be\n" -"retrieved. Choose the one nearest you. A package-selection tree will\n" -"appear: review the selection, and press \"Install\" to retrieve and install\n" -"the selected package(s), or \"Cancel\" to abort." -msgstr "" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"Any partitions that have been newly defined must be formatted for use\n" -"(formatting means creating a file system).\n" -"\n" -"At this time, you may wish to reformat some already existing partitions to\n" -"erase any data they contain. If you wish to do that, please select those\n" -"partitions as well.\n" -"\n" -"Please note that it is not necessary to reformat all pre-existing\n" -"partitions. You must reformat the partitions containing the operating\n" -"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n" -"reformat partitions containing data that you wish to keep (typically\n" -"\"/home\").\n" -"\n" -"Please be careful when selecting partitions. After formatting, all data on\n" -"the selected partitions will be deleted and you will not be able to recover\n" -"it.\n" -"\n" -"Click on \"Next ->\" when you are ready to format partitions.\n" -"\n" -"Click on \"<- Previous\" if you want to choose another partition for your\n" -"new Mandrake Linux operating system installation.\n" -"\n" -"Click on \"Advanced\" if you wish to select partitions that will be checked\n" -"for bad blocks on the disk." -msgstr "" -"Будь-який з нових визначених п╕дрозд╕л╕в ма╓ бути в╕дформатований для\n" -"використання (форматування означа╓ створення файлово╖ системи).\n" -"\n" -"Зараз Ви, можливо, захочете в╕дформатувати деяк╕ з уже ╕снуючих\n" -"п╕дрозд╕л╕в для того, щоб стерти дан╕, як╕ на них записан╕. Якщо Ви\n" -"хочете це зробити, вибер╕ть також п╕дрозд╕ли, як╕ ви хочете\n" -"в╕дформатувати.\n" -"\n" -"Зауважте, однак, що не обов'язково форматувати вс╕ п╕дрозд╕ли, як╕\n" -"╕снували ран╕ше. Ви ма╓те в╕дформатувати п╕дрозд╕ли, як╕ м╕стять\n" -"операц╕йну систему (так╕, як \"/\", \"/usr\" чи \"/var\"), але ви не ма╓те\n" -"форматувати т╕ розд╕ли, як╕ м╕стять дан╕, як╕ ви б хот╕ли зберегти\n" -"(типово це п╕дрозд╕л \"/home\").\n" -"\n" -"Будьте уважн╕ з вибором п╕дрозд╕л╕в. П╕сля форматування вс╕ дан╕ на\n" -"п╕дрозд╕лах будуть стерт╕ ╕ ви не зможете в╕дновити н╕чого з них.\n" -"\n" -"Клацн╕ть на \"Гаразд\" коли ви готов╕ приступити до форматування\n" -"п╕дрозд╕л╕в.\n" -"\n" -"Клацн╕ть на \"В╕дм╕нити\", якщо ви хочете вибрати ╕нш╕ п╕дрозд╕ли для\n" -"того, щоб встановити нову систему Мандрейк Л╕накс.\n" -"\n" -"Натисн╕ть на Додатково, якщо Ви хочете вибрати п╕дрозд╕ли для ╖хньо╖\n" -"перев╕рки на ╕снування зб╕йних блок╕в." - -#: ../../help.pm:1 -#, c-format -msgid "" -"There you are. Installation is now complete and your GNU/Linux system is\n" -"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n" -"you should see after your computer has finished doing its hardware tests is\n" -"the bootloader menu, giving you the choice of which operating system to\n" -"start.\n" -"\n" -"The \"Advanced\" button shows two more buttons to:\n" -"\n" -" * \"generate auto-install floppy\": to create an installation floppy disk\n" -"that will automatically perform a whole installation without the help of an\n" -"operator, similar to the installation you just configured.\n" -"\n" -" Note that two different options are available after clicking the button:\n" -"\n" -" * \"Replay\". This is a partially automated installation. The\n" -"partitioning step is the only interactive procedure.\n" -"\n" -" * \"Automated\". Fully automated installation: the hard disk is\n" -"completely rewritten, all data is lost.\n" -"\n" -" This feature is very handy when installing a number of similar machines.\n" -"See the Auto install section on our web site for more information.\n" -"\n" -" * \"Save packages selection\"(*): saves a list of the package selected in\n" -"this installation. To use this selection with another installation, insert\n" -"the floppy and start the installation. At the prompt, press the [F1] key\n" -"and type >>linux defcfg=\"floppy\" <<.\n" -"\n" -"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n" -"\"mformat a:\")" -msgstr "" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"At this point, you need to decide where you want to install the Mandrake\n" -"Linux operating system on your hard drive. If your hard drive is empty or\n" -"if an existing operating system is using all the available space you will\n" -"have to partition the drive. Basically, partitioning a hard drive consists\n" -"of logically dividing it to create the space needed to install your new\n" -"Mandrake Linux system.\n" -"\n" -"Because the process of partitioning a hard drive is usually irreversible\n" -"and can lead to lost data if there is an existing operating system already\n" -"installed on the drive, partitioning can be intimidating and stressful if\n" -"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n" -"simplifies this process. Before continuing with this step, read through the\n" -"rest of this section and above all, take your time.\n" -"\n" -"Depending on your hard drive configuration, several options are available:\n" -"\n" -" * \"Use free space\": this option will perform an automatic partitioning\n" -"of your blank drive(s). If you use this option there will be no further\n" -"prompts.\n" -"\n" -" * \"Use existing partition\": the wizard has detected one or more existing\n" -"Linux partitions on your hard drive. If you want to use them, choose this\n" -"option. You will then be asked to choose the mount points associated with\n" -"each of the partitions. The legacy mount points are selected by default,\n" -"and for the most part it's a good idea to keep them.\n" -"\n" -" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n" -"installed on your hard drive and takes all the space available on it, you\n" -"have to create free space for Linux data. To do so, you can delete your\n" -"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n" -"or resize your Microsoft Windows FAT partition. Resizing can be performed\n" -"without the loss of any data, provided you previously defragment the\n" -"Windows partition and that it uses the FAT format. Backing up your data is\n" -"strongly recommended.. Using this option is recommended if you want to use\n" -"both Mandrake Linux and Microsoft Windows on the same computer.\n" -"\n" -" Before choosing this option, please understand that after this\n" -"procedure, the size of your Microsoft Windows partition will be smaller\n" -"then when you started. You will have less free space under Microsoft\n" -"Windows to store your data or to install new software.\n" -"\n" -" * \"Erase entire disk\": if you want to delete all data and all partitions\n" -"present on your hard drive and replace them with your new Mandrake Linux\n" -"system, choose this option. Be careful, because you will not be able to\n" -"undo your choice after you confirm.\n" -"\n" -" !! If you choose this option, all data on your disk will be deleted. !!\n" -"\n" -" * \"Remove Windows\": this will simply erase everything on the drive and\n" -"begin fresh, partitioning everything from scratch. All data on your disk\n" -"will be lost.\n" -"\n" -" !! If you choose this option, all data on your disk will be lost. !!\n" -"\n" -" * \"Custom disk partitioning\": choose this option if you want to manually\n" -"partition your hard drive. Be careful -- it is a powerful but dangerous\n" -"choice and you can very easily lose all your data. That's why this option\n" -"is really only recommended if you have done something like this before and\n" -"have some experience. For more instructions on how to use the DiskDrake\n" -"utility, refer to the ``Managing Your Partitions '' section in the\n" -"``Starter Guide''." -msgstr "" -"Тепер ви ма╓те вибрати де саме ви б хот╕ли встановити свою систему\n" -"Мандрейк Л╕накс на жорсткому диску. Якщо диск пустий, або якщо в╕н\n" -"повн╕стю зайнятий ╕ншою операц╕йною системою, Вам потр╕бно буде\n" -"перерозпод╕лити диск. Фактично, перерозпод╕л жорсткого диску означа╓,\n" -"що диск буде розд╕лено на лог╕чн╕ п╕дрозд╕ли, для того, щоб створити\n" -"прост╕р для установки Мандрейк Л╕накса.\n" -"\n" -"Через те, що насл╕дки в╕д перерозпод╕лу диску звичайно незворотн╕, ця\n" -"операц╕я може бути хвилюючою для недосв╕дченого користувача.\n" -"\n" -"Якщо Ви користу╓тесь програмою установки в експертному режим╕, Ви\n" -"вв╕йдете в зас╕б для розбивки диск╕в на п╕дрозд╕ли Мандрейк Л╕накса:\n" -"DiskDrake. В╕д нада╓ можлив╕сть точного вибору розм╕р╕в\n" -"п╕дрозд╕л╕в. Подив╕ться розд╕л DiskDrake в п╕дручнику. Ви можете також\n" -"скористуватись пом╕чниками для р╕зних етап╕в установки, якщо клацнете\n" -"кнопку Пом╕чник.\n" -"\n" -"Цей пом╕чник спрощу╓ процес. Перш, н╕ж починати перерозпод╕л диску,\n" -"проконсультуйтесь з пос╕бником користувача.\n" -"\n" -"Якщо п╕дрозд╕ли вже було визначено (в╕д попередньо╖ установки або за\n" -"допомогою ╕ншо╖ програми розпод╕лу диск╕в), Вам потр╕бно буде вибрати\n" -"ц╕ п╕дрозд╕ли для увстановлення операц╕йно╖ системи Л╕накс на цих\n" -"п╕дрозд╕лах.\n" -"\n" -"Якщо так╕ п╕дрозд╕ли ще не були визначен╕, Вам потр╕бно буде ╖х\n" -"створити. Для цього ви можете скористуватися пом╕чником, який Ви\n" -"бачите вгор╕. В залежност╕ в╕д конф╕╜угац╕╖ Вашого жорсткого диску, Ви\n" -"можете мати к╕лька р╕зних вар╕ант╕в конф╕╜урац╕╖.\n" -"\n" -"* Користуватися ╕снуючими п╕дрозд╕лами: пом╕чник виявив один або\n" -"б╕льше п╕дрозд╕л╕в Л╕накса на Вашому жорсткому диску. Якщо ви хочете\n" -"зберегти ц╕ п╕дрозд╕ли, вибер╕ть цей пункт.\n" -"\n" -"\n" -"* Стерти весь диск: якщо ви хочете стерти вс╕ дан╕ на вс╕х п╕дрозд╕лах\n" -"Вашого жорсткого диску ╕ зам╕нити ╖х новою системою Мандрейк Л╕накс,\n" -"можете вибрати цю опц╕ю. Будьте уважн╕, бо вибравши цей\n" -"режим, ви вже не зможете повернутись назад.\n" -"\n" -"* Скористуватись в╕льним простором на п╕дрозд╕л╕ операц╕йно╖ системи\n" -"Windows: якщо на комп'ютер╕ встановлена операц╕йна система Microsoft\n" -"Windows ╕ вона займа╓ весь прост╕р на Вашому жорсткому диску, Ви\n" -"повинн╕ створити в╕льний прост╕р на диску для Л╕накса. Це можна\n" -"зробити, стерши повн╕стю всю систему Windows (див. \"Стерти весь диск\"\n" -"або режим установки \"Експерт\") або зм╕нивши розм╕р п╕дрозд╕лу, який\n" -"зайнятий Windows. Зм╕на розм╕ру п╕дрозд╕лу може бути зроблена без\n" -"втрати даних. Цей спос╕б установки рекоменду╓ться, якщо ви хочете мати\n" -"обидв╕ системи, ╕ Microsoft Windows, ╕ Мандрейк Л╕накс встановлен╕ на\n" -"сво╓му комп'ютер╕.\n" -"\n" -"Перш, н╕ж вибирати цей режим, зрозум╕йте, що у цьому випадку розм╕р\n" -"п╕дрозд╕лу для Microsoft Windows буде меншим, н╕ж зараз. Це означа╓,\n" -"що ви будете мати менше в╕льного простору при робот╕ в Microsoft\n" -"Windows для запису Ваших даних та програм.\n" -"\n" -"* Стерти Windows: це просто з╕тре повн╕стю весь диск ╕ почне св╕жий\n" -"под╕л на п╕дрозд╕ли. Вс╕ дан╕ на диску буде втрачено.\n" -"\n" -"!! Якщо Ви виберете цей пункт, вс╕ дан╕ на диску будуть втрачен╕. !!\n" -"\n" -"* Експертний режим: якщо ви хочете вручну перерозпод╕лити прост╕р на\n" -"Вашому жорсткому диску, ви можете вибрати цей режим. Однак будьте\n" -"обережними перш, н╕ж вибирати цей режим. Це -- потужний, але дуже\n" -"небезпечний режим. Ви можете втратити вс╕ дан╕ дуже просто. Отже, не\n" -"вибирайте цей режим, якщо добре не розум╕╓те, що саме ви робите." - -#: ../../help.pm:1 -#, c-format -msgid "" -"Finally, you will be asked whether you want to see the graphical interface\n" -"at boot. Note this question will be asked even if you chose not to test the\n" -"configuration. Obviously, you want to answer \"No\" if your machine is to\n" -"act as a server, or if you were not successful in getting the display\n" -"configured." -msgstr "" -"П╕сля цього Вам буде задане запитання, чи хот╕ли б Ви, щоб граф╕чний\n" -"╕нтерфейс вмикався автоматично при завантаженн╕ системи. Зауважте, що\n" -"це запитання буде задане нав╕ть якщо Ви в╕дмовитесь в╕д випробовування\n" -"конф╕╜урац╕╖. Звичайно ж, якщо Ваша машина буде працювати сервером,\n" -"або якщо Ви не змогли в╕рно настро╖ти X, тут краще в╕дпов╕сти \"Н╕\"." - -#: ../../help.pm:1 -#, c-format -msgid "" -"In the case that different servers are available for your card, with or\n" -"without 3D acceleration, you are then proposed to choose the server that\n" -"best suits your needs." -msgstr "" - -#: ../../help.pm:1 -#, c-format -msgid "" -"Resolution\n" -"\n" -" You can choose here resolutions and color depth between those available\n" -"for your hardware. Choose the one that best suit your needs (you will be\n" -"able to change that after installation though). A sample of the chosen\n" -"configuration is shown in the monitor." -msgstr "" - -#: ../../help.pm:1 -#, c-format -msgid "" -"Monitor\n" -"\n" -" The installer can normally automatically detect and configure the\n" -"monitor connected to your machine. If it is not the case, you can choose in\n" -"this list the monitor you actually own." -msgstr "" - -#: ../../help.pm:1 -#, c-format -msgid "" -"X (for X Window System) is the heart of the GNU/Linux graphical interface\n" -"on which all the graphical environments (KDE, GNOME, AfterStep,\n" -"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n" -"\n" -"You will be presented the list of different parameters to change to get an\n" -"optimal graphical display: Graphic Card\n" -"\n" -" The installer can normally automatically detect and configure the\n" -"graphic card installed on your machine. If it is not the case, you can\n" -"choose in this list the card you actually own.\n" -"\n" -" In the case that different servers are available for your card, with or\n" -"without 3D acceleration, you are then proposed to choose the server that\n" -"best suits your needs.\n" -"\n" -"\n" -"\n" -"Monitor\n" -"\n" -" The installer can normally automatically detect and configure the\n" -"monitor connected to your machine. If it is not the case, you can choose in\n" -"this list the monitor you actually own.\n" -"\n" -"\n" -"\n" -"Resolution\n" -"\n" -" You can choose here resolutions and color depth between those available\n" -"for your hardware. Choose the one that best suit your needs (you will be\n" -"able to change that after installation though). A sample of the chosen\n" -"configuration is shown in the monitor.\n" -"\n" -"\n" -"\n" -"Test\n" -"\n" -" the system will try to open a graphical screen at the desired\n" -"resolution. If you can see the message during the test and answer \"Yes\",\n" -"then DrakX will proceed to the next step. If you cannot see the message, it\n" -"means that some part of the autodetected configuration was incorrect and\n" -"the test will automatically end after 12 seconds, bringing you back to the\n" -"menu. Change settings until you get a correct graphical display.\n" -"\n" -"\n" -"\n" -"Options\n" -"\n" -" You can here choose whether you want to have your machine automatically\n" -"switch to a graphical interface at boot. Obviously, you want to check\n" -"\"No\" if your machine is to act as a server, or if you were not successful\n" -"in getting the display configured." -msgstr "" - -#: ../../help.pm:1 -#, c-format -msgid "" -"Graphic Card\n" -"\n" -" The installer can normally automatically detect and configure the\n" -"graphic card installed on your machine. If it is not the case, you can\n" -"choose in this list the card you actually own.\n" -"\n" -" In the case that different servers are available for your card, with or\n" -"without 3D acceleration, you are then proposed to choose the server that\n" -"best suits your needs." -msgstr "" - -#: ../../help.pm:1 -#, c-format -msgid "" -"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n" -"local time according to the time zone you selected. If the clock on your\n" -"motherboard is set to local time, you may deactivate this by unselecting\n" -"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n" -"system clock and the hardware clock are in the same timezone. This is\n" -"useful when the machine also hosts another operating system like Windows.\n" -"\n" -"The \"Automatic time synchronization \" option will automatically regulate\n" -"the clock by connecting to a remote time server on the Internet. For this\n" -"feature to work, you must have a working Internet connection. It is best to\n" -"choose a time server located near you. This option actually installs a time\n" -"server that can used by other machines on your local network." -msgstr "" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"This dialog is used to choose which services you wish to start at boot\n" -"time.\n" -"\n" -"DrakX will list all the services available on the current installation.\n" -"Review each one carefully and uncheck those which are not always needed at\n" -"boot time.\n" -"\n" -"A short explanatory text will be displayed about a service when it is\n" -"selected. However, if you are not sure whether a service is useful or not,\n" -"it is safer to leave the default behavior.\n" -"\n" -"!! At this stage, be very careful if you intend to use your machine as a\n" -"server: you will probably not want to start any services that you do not\n" -"need. Please remember that several services can be dangerous if they are\n" -"enabled on a server. In general, select only the services you really need.\n" -"!!" -msgstr "" -"Ви можете вибрати як╕ серв╕си будуть запускатися автоматично при\n" -"старт╕ системи. \n" -"\n" -"Тут нада╓ться список вс╕х служб, що можуть встановлюватися програмою\n" -"установки. Перегляньте уважно ц╕ служби ╕ в╕дм╕н╕ть виб╕р тих, як╕ не\n" -"повинн╕ запускатися при старт╕ системи.\n" -"\n" -"Коли Ваша мишка насува╓ться на один ╕з пункт╕в, невеличка кулька ╕з\n" -"п╕дсказкою з'явиться, яка опису╓ функц╕╖ даного серв╕су.\n" -"\n" -"Будьте особливо уважними, якщо ви збира╓тесь використовувати цю\n" -"систему як сервер: напевне не потр╕бно стартувати н╕як╕ серв╕си, як╕\n" -"не будуть використовуватися. Пам'ятайте, будь-ласка, що деяк╕ вмикнен╕\n" -"серв╕си можуть бути небезпечними на сервер╕.\n" -"Як загальне правило, вибирайте т╕льки т╕ серв╕си, як╕ Вам справд╕ \n" -"необх╕дн╕." - -#: ../../help.pm:1 -#, c-format -msgid "" -"\"Printer\": clicking on the \"Configure\" button will open the printer\n" -"configuration wizard. Consult the corresponding chapter of the ``Starter\n" -"Guide'' for more information on how to setup a new printer. The interface\n" -"presented there is similar to the one used during installation." -msgstr "" - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"You will now set up your Internet/network connection. If you wish to\n" -"connect your computer to the Internet or to a local network, click \"Next\n" -"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n" -"If this detection fails, uncheck the \"Use auto detection\" box. You may\n" -"also choose not to configure the network, or to do it later, in which case\n" -"clicking the \"Cancel\" button will take you to the next step.\n" -"\n" -"When configuring your network, the available connections options are:\n" -"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n" -"simple LAN connection (Ethernet).\n" -"\n" -"We will not detail each configuration option - just make sure that you have\n" -"all the parameters, such as IP address, default gateway, DNS servers, etc.\n" -"from your Internet Service Provider or system administrator.\n" -"\n" -"You can consult the ``Starter Guide'' chapter about Internet connections\n" -"for details about the configuration, or simply wait until your system is\n" -"installed and use the program described there to configure your connection." -msgstr "" -"Вибер╕ть коректну опц╕ю для з'╓днання, якщо Ви бажа╓те п╕дключити св╕й\n" -"комп'ютер до глобальних тенет чи локально╖ мереж╕. Перш, н╕ж вибирати\n" -"опц╕ю для з'╓днання, вмикн╕ть пристр╕й, щоб DrakX м╕г визначити\n" -"пристр╕й автоматично.\n" -"\n" -"Мандрейк Л╕накс пропону╓ конф╕╜урац╕ю з'╓днання з тенетами при\n" -"установц╕. Доступн╕ типи конф╕╜урац╕й: звичайний модем, модем ISDN,\n" -"з'╓днання ADSL, кабельний модем ╕, нарешт╕, звичайне з'╓днання\n" -"локально╖ мереж╕ (Ethernet).\n" -"\n" -"Тут ми не розгляда╓мо вс╕х подробиць кожного типу з'╓днання. Просто\n" -"пересв╕дч╕ться, що Ви ма╓те вс╕ необх╕дн╕ дан╕ в╕д провайдера послуг\n" -"тенет чи системного адм╕н╕стратора.\n" -"\n" -"Можете звернутися до пос╕бника за додатковою ╕нформац╕╓ю, чи просто\n" -"зачекайте, доки система встановиться, ╕ скористайтесь програмою для\n" -"встановлення конф╕╜урац╕╖ з'╓днання тенет.\n" -"\n" -"Якщо Ви не ма╓те н╕яко╖ мереж╕, н╕ з глобальними тенетеми, н╕ з\n" -"локальною мережею, натисн╕ть кнопку \"Заборонити мережу\".\n" -"\n" -"Якщо ж Ви хочете сконф╕╜урувати мережу п╕зн╕ше, п╕сля установки,\n" -"натисн╕ть на \"Зак╕нчено\"." - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"If you told the installer that you wanted to individually select packages,\n" -"it will present a tree containing all packages classified by groups and\n" -"subgroups. While browsing the tree, you can select entire groups,\n" -"subgroups, or individual packages.\n" -"\n" -"Whenever you select a package on the tree, a description appears on the\n" -"right to let you know the purpose of the package.\n" -"\n" -"!! If a server package has been selected, either because you specifically\n" -"chose the individual package or because it was part of a group of packages,\n" -"you will be asked to confirm that you really want those servers to be\n" -"installed. By default Mandrake Linux will automatically start any installed\n" -"services at boot time. Even if they are safe and have no known issues at\n" -"the time the distribution was shipped, it is entirely possible that that\n" -"security holes are discovered after this version of Mandrake Linux was\n" -"finalized. If you do not know what a particular service is supposed to do\n" -"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n" -"install the listed services and they will be started automatically by\n" -"default during boot. !!\n" -"\n" -"The \"Automatic dependencies\" option is used to disable the warning dialog\n" -"which appears whenever the installer automatically selects a package to\n" -"resolve a dependency issue. Some packages have relationships between each\n" -"other such that installation of a package requires that some other program\n" -"is already installed. The installer can determine which packages are\n" -"required to satisfy a dependency to successfully complete the installation.\n" -"\n" -"The tiny floppy disk icon at the bottom of the list allows you to load a\n" -"package list created during a previous installation. This is useful if you\n" -"have a number of machines that you wish to configure identically. Clicking\n" -"on this icon will ask you to insert a floppy disk previously created at the\n" -"end of another installation. See the second tip of last step on how to\n" -"create such a floppy." -msgstr "" -"╤ нарешт╕, в залежност╕ в╕д того, чи Ви вибрали ╕ндив╕дуальний виб╕р\n" -"пакет╕в чи н╕, Вам буде показано повне дерево пакет╕в з╕браних по\n" -"групах ╕ п╕дгрупах. Переглядаючи пакети Ви зможете вибрати повн╕\n" -"групи, п╕дгрупи та ╕ндив╕дуальн╕ пакети.\n" -"\n" -"Кожного разу, коли Ви вибира╓те пакет в дерев╕, з'явла╓ться п╕дказка,\n" -"праворуч в╕д назви. \n" -" \n" -"П╕сля того, як Ви зак╕нчили виб╕р пакет╕в, натисн╕ть кнопку\n" -"Встановити. Почнеться власне установка системи. Якщо к╕льк╕сть\n" -"вибраних пакет╕в велика, можете п╕ти попити кави.\n" -"\n" -"!! Якщо або навмисне, або як складова частина яко╖сь групи, було\n" -"вибрано для установки певн╕ сервери, Вам буде задане запитання, чи Ви\n" -"справд╕ бажа╓те бачити ц╕ сервери встановленими. В Мандрейку вс╕\n" -"встановлен╕ сервери автоматично запускаються при завантаженн╕\n" -"системи. Нав╕ть, якщо на час куп╕вл╕ системи не було в╕домо проблем з\n" -"безпекою даних сервер╕в, можливо, що в п╕зн╕ший час так╕ проблеми\n" -"будуть виявлен╕. Особливо, якщо Ви не зна╓те про що йде мова,\n" -"натисн╕ть тут на Н╕. Якщо Ви натиснете Так, сервери будуть встановлен╕\n" -"╕ вмикнен╕ неявно!!\n" -"\n" -"Опц╕я Автоматичн╕ залежност╕ забороня╓ попередження коли програма\n" -"установки знаходить, що т╕льки що вибраний (чи в╕дм╕нений виб╕р) пакет\n" -"залежить в╕д ╕ншого пакету.\n" -"\n" -"Маленька п╕ктограма гнучкого диска в самому низу списку дозволя╓\n" -"завантажити список пакет╕в з дискети, якщо при попередн╕й установц╕ Ви\n" -"зберегли його на дискету. П╕сля натискання ц╕╓╖ кнопки, система\n" -"попросить вставити дискету ╕з списком пакет╕в у прив╕д. Додатково Ви\n" -"можете отримати ╕нформац╕ю про те, як створити таку дискету в друг╕й\n" -"порад╕ останнього пункту." - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"It is now time to specify which programs you wish to install on your\n" -"system. There are thousands of packages available for Mandrake Linux, and\n" -"to make it simpler to manage the packages have been placed into groups of\n" -"similar applications.\n" -"\n" -"Packages are sorted into groups corresponding to a particular use of your\n" -"machine. Mandrake Linux has four predefined installations available. You\n" -"can think of these installation classes as containers for various packages.\n" -"You can mix and match applications from the various containers, so a\n" -"``Workstation'' installation can still have applications from the\n" -"``Development'' container installed.\n" -"\n" -" * \"Workstation\": if you plan to use your machine as a workstation,\n" -"select one or more of the applications that are in the workstation\n" -"container.\n" -"\n" -" * \"Development\": if plan on using your machine for programming, choose\n" -"the appropriate packages from the container.\n" -"\n" -" * \"Server\": if your machine is intended to be a server, select which of\n" -"the more common services you wish to install on your machine.\n" -"\n" -" * \"Graphical Environment\": this is where you will choose your preferred\n" -"graphical environment. At least one must be selected if you want to have a\n" -"graphical interface available.\n" -"\n" -"Moving the mouse cursor over a group name will display a short explanatory\n" -"text about that group. If you unselect all groups when performing a regular\n" -"installation (as opposed to an upgrade), a dialog will pop up proposing\n" -"different options for a minimal installation:\n" -"\n" -" * \"With X\": install the minimum number of packages possible to have a\n" -"working graphical desktop.\n" -"\n" -" * \"With basic documentation\": installs the base system plus basic\n" -"utilities and their documentation. This installation is suitable for\n" -"setting up a server.\n" -"\n" -" * \"Truly minimal install\": will install the absolute minimum number of\n" -"packages necessary to get a working Linux system. With this installation\n" -"you will only have a command line interface. The total size of this\n" -"installation is 65 megabytes.\n" -"\n" -"You can check the \"Individual package selection\" box, which is useful if\n" -"you are familiar with the packages being offered or if you want to have\n" -"total control over what will be installed.\n" -"\n" -"If you started the installation in \"Upgrade\" mode, you can unselect all\n" -"groups to avoid installing any new package. This is useful for repairing or\n" -"updating an existing system." -msgstr "" -"Тепер час вибрати, як╕ програми Ви хочете мати в сво╖й\n" -"систем╕. Мандрейк Л╕накс ма╓ тисяч╕ програмних пакет╕в, ╕ Вам нема╓\n" -"необх╕дност╕ знати ╖х вс╕. \n" -"\n" -"Якщо Ви встановлю╓те систему ╕з стандартного компакт-диску, Вам\n" -"спочатку буде задане запитання, як╕ диски Ви ма╓те. Перев╕рте сво╖\n" -"компакт-диски, в╕дм╕тьте в╕дпов╕дн╕ пункти на екран╕ ╕ натисн╕ть\n" -"Гаразд.\n" -"\n" -"Пакети з╕бран╕ у групи пакет╕в, в╕дпов╕дно до конкретного вжитку для\n" -"машини.\n" -"\n" -"Групи пакет╕в розд╕лен╕ на чотири велик╕ розд╕ли:\n" -"\n" -"* Робоча станц╕я: якщо Ваша машина буде вживатися як робоча станц╕я,\n" -"вибер╕ть одну чи к╕лька в╕дпов╕дних груп.\n" -"\n" -"* Граф╕чн╕ середовища: Вибер╕ть граф╕чне середовище соб╕ до\n" -"вподоби. Вибер╕ть хоча б одне, якщо Ви хочете вживати машину як робочу\n" -"станц╕ю.\n" -"\n" -"* Розробка: вибер╕ть в╕дпов╕дн╕ групи, якщо ця машина буде вживатися\n" -"для програмування.\n" -"\n" -"* Сервер: нарешт╕, якщо машина буду╓ться для використання в якост╕\n" -"сервера, Ви можете вибрати найб╕льш розповсюджен╕ серв╕си, як╕ Ви\n" -"хочете бачити на сво╖й машин╕.\n" -"\n" -"Пересування курсора ╕ коротка зупинка над певним пунктом буде\n" -"висв╕чувати п╕дказку по дан╕й груп╕.\n" -"\n" -"Якщо Ви натиснете на кнопку Додатково, Ви будете мати можлив╕сть\n" -"вибрати окрем╕ пакети один по одному. Це зручно, якщо Ви добре зна╓те,\n" -"як╕ пакети встановлюються, або якщо Ви хочете мати повний контроль над\n" -"тим, що встановлю╓ться в систем╕. \n" -"\n" -"Якщо Ви почали установку в режим╕ \"Поновлення\", Ви можете в╕дм╕нити\n" -"виб╕р вс╕х груп щоб у систем╕ не встановлювались н╕як╕ нов╕ пакети ╕\n" -"т╕льки система поновилась. " - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n" -"knows if a selected package is located on another CD-ROM so it will eject\n" -"the current CD and ask you to insert the correct CD as required." -msgstr "" -"Дистрибутив Мандрейк Л╕накс розм╕щений на к╕лькох\n" -"компакт-дисках. Можливо, drakX вибрав пакети, що знаходяться на ╕нших\n" -"дисках (в╕дм╕нних в╕д установочного). Коли для установки буде потр╕бен\n" -"╕нший диск, програма витягне даний компакт-диск ╕ попросить вставити\n" -"потр╕бний. " - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"Here are Listed the existing Linux partitions detected on your hard drive.\n" -"You can keep the choices made by the wizard, since they are good for most\n" -"common installations. If you make any changes, you must at least define a\n" -"root partition (\"/\"). Do not choose too small a partition or you will not\n" -"be able to install enough software. If you want to store your data on a\n" -"separate partition, you will also need to create a \"/home\" partition\n" -"(only possible if you have more than one Linux partition available).\n" -"\n" -"Each partition is listed as follows: \"Name\", \"Capacity\".\n" -"\n" -"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" -"\"partition number\" (for example, \"hda1\").\n" -"\n" -"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" -"\"sd\" if it is a SCSI hard drive.\n" -"\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" -"hard drives:\n" -"\n" -" * \"a\" means \"master hard drive on the primary IDE controller\";\n" -"\n" -" * \"b\" means \"slave hard drive on the primary IDE controller\";\n" -"\n" -" * \"c\" means \"master hard drive on the secondary IDE controller\";\n" -"\n" -" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" -"\n" -"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" -"\"second lowest SCSI ID\", etc." -msgstr "" -"Вище перел╕чен╕ вже ╕снуюч╕ п╕дрозд╕ли, знайден╕ на Вашому жорсткому\n" -"диску. Ви можете притримуватись конф╕╜урац╕╖, встановлено╖\n" -"пом╕чником. Ця конф╕╜урац╕я п╕дходить для б╕льшост╕ випадк╕в\n" -"використання системи. Якщо ви вир╕шите зм╕нити цю конф╕╜урац╕ю, як\n" -"м╕н╕мум Ви ма╓те визначити кореневу файлову систему (/). Не вид╕ляйте\n" -"для цього занадто малий п╕дрозд╕л, бо ╕накше ви не зможете встановити\n" -"все потр╕бне програмне забезпечення. Якщо ви бажа╓те зберегти вс╕ сво╖\n" -"дан╕ на окремому п╕дрозд╕л╕, Вам потр╕бно буде також вибрати п╕дрозд╕л\n" -"для \"/home\" (т╕льки в тому випадку, якщо ви ма╓те б╕льше одного\n" -"п╕дрозд╕ла для Л╕накса). \n" -"\n" -"Кожен п╕дрозд╕л поданий в такому вигляд╕: \"Назва\", \"Об'╓м\".\n" -"\n" -"Назва розшифрову╓ться так: \"тип жорсткого диску\", \"номер жорсткого\n" -"диску\", \"номер п╕дрозд╕лу на диску\", (Наприклад: \"hda1\").\n" -"\n" -"\"Тип жорсткого диску\" - це \"hd\", якщо ви ма╓те диск типу IDE, ╕ \"sd\",\n" -"якщо ви ма╓те жорсткий диск типу SCSI.\n" -"\n" -"\"Номер жорского диску\" - це завжди л╕тера п╕сля \"hd\" чи \"sd\". Для\n" -"диск╕в типу IDE це:\n" -"\n" -" * \"a\" - головний диск (master) на першому контролер╕ IDE,\n" -"\n" -" * \"b\" - вторинний (slave) диск на першому контролер╕ IDE,\n" -"\n" -" * \"c\" - головний диск на другому контролер╕ IDE,\n" -"\n" -" * \"d\" - вторинний диск на другому контролер╕ IDE.\n" -"\n" -"Для SCSI диск╕в \"a\" означа╓ \"головний диск\", \"b\" - другорядний диск, " -"╕\n" -"т.д. ..." - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"GNU/Linux is a multi-user system, meaning each user can have their own\n" -"preferences, their own files and so on. You can read the ``Starter Guide''\n" -"to learn more about multi-user systems. But unlike \"root\", which is the\n" -"system administrator, the users you add at this point will not be\n" -"authorized to change anything except their own files and their own\n" -"configuration, protecting the system from unintentional or malicious\n" -"changes that impact the system as a whole. You will have to create at least\n" -"one regular user for yourself -- this is the account which you should use\n" -"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n" -"to do anything and everything, it may also be very dangerous! A mistake\n" -"could mean that your system would not work any more. If you make a serious\n" -"mistake as a regular user, the worst that will happen is that you will lose\n" -"some information, but not affect the entire system.\n" -"\n" -"The first field asks you for a real name. Of course, this is not mandatory\n" -"-- you can actually enter whatever you like. DrakX will use the first word\n" -"you typed in and copy it to the \"User name\" field, which is the name this\n" -"user will enter to log onto the system. If you like, you may override the\n" -"default and change the username. The next step is to enter a password. From\n" -"a security point of view, a non-privileged (regular) user password is not\n" -"as crucial as the \"root\" password, but that is no reason to neglect it by\n" -"making it blank or too simple: after all, your files could be the ones at\n" -"risk.\n" -"\n" -"Once you click on \"Accept user\", you can add other users. Add a user for\n" -"each one of your friends: your father or your sister, for example. Click\n" -"\"Next ->\" when you have finished adding users.\n" -"\n" -"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n" -"for that user (bash by default).\n" -"\n" -"When you are finished adding all users, you will be asked to choose a user\n" -"that can automatically log into the system when the computer boots up. If\n" -"you are interested in that feature (and do not care much about local\n" -"security), choose the desired user and window manager, then click \"Next\n" -"->\". If you are not interested in this feature, uncheck the \"Do you want\n" -"to use this feature?\" box." -msgstr "" -"GNU/Linux - багатокористувацька система, ╕ це означа╓, що кожен з\n" -"користувач╕в може мати сво╖ власн╕ установки, власн╕ файли, тощо. Щоб\n" -"б╕льше д╕знатися про це Ви можете прочитати П╕дручник користувача з\n" -"системи. Але на в╕дм╕ну в╕д користувача Root, який ╓ адм╕н╕стратором\n" -"системи, користувач╕, яких Ви будете створювати на цьому кроц╕, не\n" -"мають права зм╕нювати н╕чого в систем╕ кр╕м сво╖х власних файл╕в ╕\n" -"власно╖ конф╕╜урац╕╖. Ви ма╓те створити рахунок для хоча б одного\n" -"╓диного користувача - для самого себе. Ви будете користуватися цим\n" -"рахунком для того, щоб виконувати щоденн╕ задач╕. ╤ хоча це ╕ дуже\n" -"зручно ре╓струватись в систем╕ як Root, але одночасно це ╕ дуже\n" -"небезпечно! Найменша помилка може призвести до того, що система буде\n" -"неробочою. Якщо Ви помилитесь як звичайний користувач, Ви можете,\n" -"звичайно, втратити деяк╕ сво╖ дан╕, але не всю систему.\n" -"\n" -"Спочатку надрукуйте сво╓ повне ╕м'я. Це не обов'язково, Ви можете\n" -"надрукувати все, що завгодно. drakx пот╕м в╕зьме перше слово ╕\n" -"використа╓ його як ╕м'я користувача. Це - ╕м'я п╕д яким користувач\n" -"буде ре╓струватись у систем╕. Ви можете зм╕нити це ╕м'я. Пот╕м Ви\n" -"ма╓те ввести пароль. Пароль звичайного (не root) користувача не така\n" -"критична р╕ч, як пароль адм╕н╕стратора, але все-одно нема╓ причин для\n" -"того, щоб нехтувати ним. Врешт╕-решт, це загрожу╓ Вашим власним\n" -"файлам. \n" -"\n" -"П╕сля того, як Ви натиснете на кнопку Прийняти користувача, Ви можете\n" -"створити ще багато ╕нших користувач╕в. Створ╕ть рахунки для кожного з\n" -"Ваших друз╕в, для тата й сестри, наприклад. П╕сля того, як створено\n" -"вс╕ потр╕бн╕ рахунки користувач╕в, натисн╕ть клав╕шу Зак╕нчено.\n" -"\n" -"Якщо Ви натиснете на кнопку Додатково, Ви будете мати можлив╕сть\n" -"встановити командну оболонку даного користувача (неявно встановлю╓ться\n" -"bash). " - -#: ../../help.pm:1 -#, fuzzy, c-format -msgid "" -"Before continuing, you should carefully read the terms of the license. It\n" -"covers the entire Mandrake Linux distribution. If you do agree with all the\n" -"terms in it, check the \"Accept\" box. If not, simply turn off your\n" -"computer." -msgstr "" -"Перш, н╕ж ╕ти дал╕, Ви ма╓те прочитати уважно умови л╕ценз╕╖. Вона\n" -"стосу╓ться всього диструбутиву Мандрейк Л╕накс, ╕, якщо Ви не\n" -"погоджу╓тесь з умовами л╕ценз╕╖, натисн╕ть кнопку В╕дмовитись. Це того\n" -"ж часу в╕дм╕нить установку системи. Для продовження установки\n" -"натисн╕ть кнопку Погодитись." - -#: ../../install2.pm:1 -#, c-format -msgid "You must also format %s" -msgstr "" - -#: ../../install2.pm:1 -#, c-format -msgid "" -"Can't access kernel modules corresponding to your kernel (file %s is " -"missing), this generally means your boot floppy in not in sync with the " -"Installation medium (please create a newer boot floppy)" -msgstr "" - -#: ../../install_any.pm:1 -#, c-format -msgid "" -"An error occurred - no valid devices were found on which to create new " -"filesystems. Please check your hardware for the cause of this problem" -msgstr "" -"Сталася помилка - не знайдено в╕дпов╕дних диск╕в для створення новихфайлових " -"систем. Перев╕рте будь-ласка свою систему ╕ спробуйтев╕дшукати причину цього." - -#: ../../install_any.pm:1 ../../partition_table.pm:1 -#, c-format -msgid "Error reading file %s" -msgstr "Помилка при читанн╕ файла %s" - -#: ../../install_any.pm:1 -#, c-format -msgid "" -"To use this saved packages selection, boot installation with ``linux " -"defcfg=floppy''" -msgstr "" -"Для того, щоб використовувати записан╕ вибран╕ пакети, завантажте\n" -"систему з ``linux defcfg=floppy''" - -#: ../../install_any.pm:1 -#, c-format -msgid "This floppy is not FAT formatted" -msgstr "Ця дискета не в╕дформатована як FAT" - -#: ../../install_any.pm:1 -#, c-format -msgid "Insert a FAT formatted floppy in drive %s" -msgstr "Вставте дискету в╕дформатовану у FAT в дисков╕д %s" - -#: ../../install_any.pm:1 -#, c-format -msgid "Can't use broadcast with no NIS domain" -msgstr "Не можу використовувати трансляц╕ю без NIS домену" - -#: ../../install_any.pm:1 -#, c-format -msgid "" -"The following packages will be removed to allow upgrading your system: %s\n" -"\n" -"\n" -"Do you really want to remove these packages?\n" -msgstr "" - -#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1 -#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 -#: ../../standalone/harddrake2:1 -#, c-format -msgid "No" -msgstr "Н╕" - -#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1 -#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1 -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Yes" -msgstr "Так" - -#: ../../install_any.pm:1 -#, fuzzy, c-format -msgid "" -"You have selected the following server(s): %s\n" -"\n" -"\n" -"These servers are activated by default. They don't have any known security\n" -"issues, but some new ones could be found. In that case, you must make sure\n" -"to upgrade as soon as possible.\n" -"\n" -"\n" -"Do you really want to install these servers?\n" -msgstr "" -"Ви вибрали так╕(ий) сервер(и): %s\n" -"\n" -"Ц╕ сервери стандартно актив╕зован╕. Для них нев╕дом╕ н╕як╕ проблеми з\n" -"безпекою, але деяк╕ можуть бути виявлен╕. В такому випадку ви повинн╕\n" -"якомога швидше поновити верс╕╖ цих сервер╕в. \n" -"\n" -"Ви хочете дозволити установку цих сервер╕в?\n" - -#: ../../install_gtk.pm:1 -#, fuzzy, c-format -msgid "System configuration" -msgstr "Конф╕гурац╕я ╕нтернету" - -#: ../../install_gtk.pm:1 -#, fuzzy, c-format -msgid "System installation" -msgstr "Установка SILO" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Bringing down the network" -msgstr "Вимикаю мережу" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Bringing up the network" -msgstr "Вмикаю мережу" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Partitioning failed: %s" -msgstr "Розбиття на п╕дрозд╕ли невдале: %s" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "The DrakX Partitioning wizard found the following solutions:" -msgstr "Пом╕чник розбивки на п╕дрозд╕ли DrakX знайшов так╕ можлив╕ р╕шення:" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "I can't find any room for installing" -msgstr "Не можу знайти в╕льного простору для установки" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "" -"You can now partition %s.\n" -"When you are done, don't forget to save using `w'" -msgstr "" -"Тепер ви можете розбити на п╕дрозд╕ли Ваш диск %s.\n" -"П╕сля того, як ви зак╕нчите не забудьте виконати команду `w'" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Use fdisk" -msgstr "Використовувати fdisk" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Custom disk partitioning" -msgstr "Спец╕альний розпод╕л диску" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "ALL existing partitions and their data will be lost on drive %s" -msgstr "ВС╤ ╕снуюч╕ п╕дрозд╕ли та вс╕ дан╕ на диску %s будуть втрачен╕" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "You have more than one hard drive, which one do you install linux on?" -msgstr "У Вас б╕льше одного диску. На який з них ви хочете встановити Л╕накс?" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Erase entire disk" -msgstr "Стерти весь диск" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Remove Windows(TM)" -msgstr "Стерти Windows(TM)" - -#: ../../install_interactive.pm:1 -#, fuzzy, c-format -msgid "There is no FAT partition to resize (or not enough space left)" -msgstr "" -"Нема╓ п╕дрозд╕лу FAT для зм╕ни розм╕ру або для використання як пристр╕й " -"зворотнього монтування (або не вистача╓ в╕льного простору)" - -#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "" -"To ensure data integrity after resizing the partition(s), \n" -"filesystem checks will be run on your next boot into Windows(TM)" -msgstr "" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "FAT resizing failed: %s" -msgstr "Автоматична зм╕на розм╕ру FAT не спрацювала: %s" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Resizing Windows partition" -msgstr "Обчислюю меж╕ п╕дрозд╕лу Windows" - -#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Resizing" -msgstr "Зм╕нюю розм╕р" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "partition %s" -msgstr "п╕дрозд╕л %s" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Which size do you want to keep for Windows on" -msgstr "Який розм╕р ви хочете залишити для Windows?" - -#: ../../install_interactive.pm:1 -#, fuzzy, c-format -msgid "" -"WARNING!\n" -"\n" -"DrakX will now resize your Windows partition. Be careful:\n" -"this operation is dangerous. If you have not already done\n" -"so, you should first exit the installation, run scandisk\n" -"under Windows (and optionally run defrag), then restart the\n" -"installation. You should also backup your data.\n" -"When sure, press Ok." -msgstr "" -"УВАГА!\n" -"\n" -"Зараз DrakX потр╕бно зм╕нити розм╕р п╕дрозд╕лу ╕з Windows. Обережно:\n" -"ця операц╕я небезпечна. Якщо ви ще цього не зробили, Вам потр╕бно\n" -"зараз припиниту установку, скористатися програмою scandisk з Windows\n" -"(а кр╕м того, можливо, також дефрагментувати п╕дрозд╕л за допомогою\n" -"defrag) на цьому п╕дрозд╕л╕ та зробити резервну коп╕ю Ваших даних.\n" -"Коли все це зроблено - натисн╕ть Гаразд." - -#: ../../install_interactive.pm:1 -#, c-format -msgid "" -"Your Windows partition is too fragmented. Please reboot your computer under " -"Windows, run the ``defrag'' utility, then restart the Mandrake Linux " -"installation." -msgstr "" -"П╕дрозд╕л з Windows на Вашому комп'ютер╕ занадто\n" -"фра╜ментований. Виконайте де-фра╜ментац╕ю \n" -"спочатку (команда ``defarg'')." - -#: ../../install_interactive.pm:1 -#, fuzzy, c-format -msgid "Computing the size of the Windows partition" -msgstr "Використовувати в╕льний прост╕р на п╕дрозд╕л╕ Windows" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "" -"The FAT resizer is unable to handle your partition, \n" -"the following error occured: %s" -msgstr "" -"Програма зм╕ни розм╕ру п╕дрозд╕лу FAT не може працювати з Вашим\n" -"п╕дрозд╕лом, при робот╕ сталася така помилка: %s" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Which partition do you want to resize?" -msgstr "Розм╕р якого п╕дрозд╕лу ви хочете зм╕нити?" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Use the free space on the Windows partition" -msgstr "Використовувати в╕льний прост╕р на п╕дрозд╕л╕ Windows" - -#: ../../install_interactive.pm:1 -#, fuzzy, c-format -msgid "There is no FAT partition to use as loopback (or not enough space left)" -msgstr "" -"Нема╓ п╕дрозд╕лу FAT для зм╕ни розм╕ру або для використання як пристр╕й " -"зворотнього монтування (або не вистача╓ в╕льного простору)" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Swap partition size in MB: " -msgstr "Розм╕р п╕дрозд╕лу для своп╕нгу в Мб: " - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Root partition size in MB: " -msgstr "Розм╕р п╕дрозд╕лу root в Мб:" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Choose the sizes" -msgstr "Вибер╕ть розм╕ри" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Which partition do you want to use for Linux4Win?" -msgstr "Який п╕дрозд╕л ви хочете використати для Linux4Win?" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Use the Windows partition for loopback" -msgstr "Використовувати п╕дрозд╕л Windows для зворотнього монтування" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "There is no existing partition to use" -msgstr "Нема╓ ╕снуючих п╕дрозд╕л╕в для використання" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Use existing partitions" -msgstr "Користуватися ╕снуючим п╕дрозд╕лом" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Not enough free space to allocate new partitions" -msgstr "Недостатньо в╕льного простору для нових п╕дрозд╕л╕в" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "Use free space" -msgstr "Використовувати в╕льний прост╕р" - -#: ../../install_interactive.pm:1 ../../install_steps.pm:1 -#, c-format -msgid "You must have a FAT partition mounted in /boot/efi" -msgstr "Ви повинн╕ мати FAT п╕дрозд╕л змонтований в /boot/efi " - -#: ../../install_interactive.pm:1 -#, c-format -msgid "" -"You don't have a swap partition.\n" -"\n" -"Continue anyway?" -msgstr "" -"Ви не ма╓те п╕дрозд╕лу для своп╕нгу\n" -"\n" -"Все-таки продовжувати? " - -#: ../../install_interactive.pm:1 -#, c-format -msgid "" -"You must have a root partition.\n" -"For this, create a partition (or click on an existing one).\n" -"Then choose action ``Mount point'' and set it to `/'" -msgstr "" -"Ви повинн╕ мати п╕дрозд╕л root.\n" -"Для цього створ╕ть новий п╕дрозд╕л (або клацн╕ть на вже\n" -"╕снуючому). П╕сля цього вибер╕ть ``Точка монтування'' ╕ встанов╕ть ╖╖\n" -"в `/'" - -#: ../../install_interactive.pm:1 -#, c-format -msgid "" -"Some hardware on your computer needs ``proprietary'' drivers to work.\n" -"You can find some information about them at: %s" -msgstr "" -"Деяк╕ з апаратних засоб╕в на Вашому комп'ютер╕ вимагають драйвер╕в\n" -"ф╕рм-виготовлювач╕в для того, щоб працювати в╕рно. \n" -"\n" -"Ви можете знайти потр╕бну ╕нформац╕ю про них на: %s" - -#: ../../install_messages.pm:1 +#: ../../standalone/drakbackup:1 #, c-format msgid "" -"Congratulations, installation is complete.\n" -"Remove the boot media and press return to reboot.\n" -"\n" -"\n" -"For information on fixes which are available for this release of Mandrake " -"Linux,\n" -"consult the Errata available from:\n" -"\n" -"\n" -"%s\n" -"\n" -"\n" -"Information on configuring your system is available in the post\n" -"install chapter of the Official Mandrake Linux User's Guide." -msgstr "" -"В╕тання, установка зак╕нчена. Вийм╕ть з дисковод╕в завантажувальн╕\n" -"нос╕╖ ╕ пот╕м натисн╕ть Return для перевантаження системи.\n" -"\n" -"\n" -"Для ╕нформац╕╖ про виправлен╕ помилки знайден╕ в цмй верс╕╖\n" -"Mandrake Linux зверн╕ться до розд╕лу Errata на сервер╕\n" -"\n" -"\n" -"%s\n" +"Description:\n" "\n" +" Drakbackup is used to backup your system.\n" +" During the configuration you can select: \n" +"\t- System files, \n" +"\t- Users files, \n" +"\t- Other files.\n" +"\tor All your system ... and Other (like Windows Partitions)\n" "\n" -"Дов╕дки про конф╕гурац╕ю Вашо╖ системи приведен╕ в пост-установочному\n" -"розд╕л╕ Оф╕ц╕йного Кер╕вництва Користувача Mandrake Linux." - -#: ../../install_messages.pm:1 -#, c-format -msgid "http://www.mandrakelinux.com/en/91errata.php3" -msgstr "" - -#: ../../install_messages.pm:1 -#, c-format -msgid "" +" Drakbackup allows you to backup your system on:\n" +"\t- Harddrive.\n" +"\t- NFS.\n" +"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n" +"\t- FTP.\n" +"\t- Rsync.\n" +"\t- Webdav.\n" +"\t- Tape.\n" "\n" -"Warning\n" +" Drakbackup allows you to restore your system to\n" +" a user selected directory.\n" "\n" -"Please read carefully the terms below. If you disagree with any\n" -"portion, you are not allowed to install the next CD media. Press 'Refuse' \n" -"to continue the installation without using these media.\n" +" Per default all backups will be stored on your\n" +" /var/lib/drakbackup directory\n" "\n" +" Configuration file:\n" +"\t/etc/drakconf/drakbackup/drakbackup.conf\n" "\n" -"Some components contained in the next CD media are not governed\n" -"by the GPL License or similar agreements. Each such component is then\n" -"governed by the terms and conditions of its own specific license. \n" -"Please read carefully and comply with such specific licenses before \n" -"you use or redistribute the said components. \n" -"Such licenses will in general prevent the transfer, duplication \n" -"(except for backup purposes), redistribution, reverse engineering, \n" -"de-assembly, de-compilation or modification of the component. \n" -"Any breach of agreement will immediately terminate your rights under \n" -"the specific license. Unless the specific license terms grant you such\n" -"rights, you usually cannot install the programs on more than one\n" -"system, or adapt it to be used on a network. In doubt, please contact \n" -"directly the distributor or editor of the component. \n" -"Transfer to third parties or copying of such components including the \n" -"documentation is usually forbidden.\n" +"Restore Step:\n" +" \n" +" During the restore step, DrakBackup will remove \n" +" your original directory and verify that all \n" +" backup files are not corrupted. It is recommended \n" +" you do a last backup before restoring.\n" "\n" "\n" -"All rights to the components of the next CD media belong to their \n" -"respective authors and are protected by intellectual property and \n" -"copyright laws applicable to software programs.\n" msgstr "" -"\n" -"Будь ласка, уважно прочитайте умови подан╕ дал╕. Якщо ви не\n" -"погоджу╓тесь з будь-якою частиною, вам не дозволя╓ться встановлювати\n" -"наступний компакт-диск. Натисн╕ть на В╕дмовитися для того, щоб\n" -"продовжити установку без використання цього нос╕я.\n" -"\n" -"Деяк╕ компоненти на наступному компакт-диску не керуються л╕ценз╕╓ю\n" -"GPL чи под╕бною до не╖. В такому випадку кожен ╕з компонент╕в\n" -"керу╓ться сво╓ю специф╕чною л╕ценз╕╓ю. Будь ласка, прочитайте уважно ╕\n" -"дотримуйтесь умов тако╖ специф╕чно╖ л╕ценз╕╖ перш, н╕ж користуватися\n" -"або перерозповсюджувати таку компоненту. Так╕ л╕ценз╕╖ у б╕льшост╕\n" -"випадк╕в забороняють передачу, коп╕ювання (кр╕м створення резервно╖\n" -"коп╕╖), перерозповсюдження, зворотню ╕нженер╕ю, де-асемблювання,\n" -"де-комп╕ляц╕ю чи модиф╕кац╕ю компоненти. Будь-яке порушення л╕ценз╕╖\n" -"негайно припиня╓ ваш╕ права щодо компоненти. Якщо специф╕чно не\n" -"вказано про надання таких прав, ви не ма╓те права встановлювати ц╕\n" -"програми на б╕льш, н╕ж одн╕й систем╕, або пристосовувати ╖х для\n" -"установки в мереж╕. Якщо ви ма╓те сумн╕ви щодо л╕ценз╕╖, зверн╕ться\n" -"безпосередньо до дистриб'ютора чи редактора тако╖ компоненти. Передача\n" -"таких компонент (включаючи документац╕ю) трет╕м особам у б╕льшост╕\n" -"випадк╕в заборонена. \n" -"\n" -"Вс╕ авторськ╕ права компонент на наступному компакт-диску застережен╕\n" -"за ╖х в╕дпов╕дними авторами ╕ захищаються законами про охорону\n" -"авторських прав, як╕ мають право застосовуватися до програмних\n" -"продукт╕в.\n" #: ../../install_messages.pm:1 #, c-format @@ -3423,7588 +783,9373 @@ msgstr "" "ОБМЕЖЕННЯ В╤ДПОВ╤ДАЛЬНОСТ╤, ЗАЛЕЖНО╥ В╤Д ОБЛАДАННЯ АБО ВИКОРИСТАННЯ\n" "ЗАБОРОНЕНИХ ПРОГРАМНИХ ПРОДУКТ╤В В ДЕЯКИХ КРА╥НАХ\n" "\n" -"В межах встановлених законодавством, MandrakeSoft S.A. чи його\n" -"дистрибютори н╕ за яких умов не несуть в╕дпов╕дальност╕ за жодне\n" -"навмисне, випадкове, пряме чи опосередковане пошкодження, (включаючи\n" -"але не обмежуючись перешкодами для б╕знесу, припиненням б╕знесу,\n" -"ф╕нансовими втратами, адвокатськими витратами чи штрафами, як\n" -"результат присуду судово╖ ╕нстанц╕╖, чи будь-якими ╕ншим втратами),\n" -"як╕ виникають в╕д обладання чи використання програмних компонент чи\n" -"виникають в╕д завантаження заборонених законодавством чи обмежених до\n" -"використання в деяких кра╖нах програмних компонент по мереж╕ з одн╕╓╖\n" -"з домашн╕х стор╕нок Л╕накс Мандрейк. Ця обмежена в╕дпов╕дальн╕сть\n" -"включа╓ також (але не обмежу╓ться) так званими сильними\n" -"криптограф╕чними методами, як╕ включен╕ в Програмний продукт.\n" +"В межах встановлених законодавством, MandrakeSoft S.A. чи його\n" +"дистрибютори н╕ за яких умов не несуть в╕дпов╕дальност╕ за жодне\n" +"навмисне, випадкове, пряме чи опосередковане пошкодження, (включаючи\n" +"але не обмежуючись перешкодами для б╕знесу, припиненням б╕знесу,\n" +"ф╕нансовими втратами, адвокатськими витратами чи штрафами, як\n" +"результат присуду судово╖ ╕нстанц╕╖, чи будь-якими ╕ншим втратами),\n" +"як╕ виникають в╕д обладання чи використання програмних компонент чи\n" +"виникають в╕д завантаження заборонених законодавством чи обмежених до\n" +"використання в деяких кра╖нах програмних компонент по мереж╕ з одн╕╓╖\n" +"з домашн╕х стор╕нок Л╕накс Мандрейк. Ця обмежена в╕дпов╕дальн╕сть\n" +"включа╓ також (але не обмежу╓ться) так званими сильними\n" +"криптограф╕чними методами, як╕ включен╕ в Програмний продукт.\n" +"\n" +"3. Л╕ценз╕я GPL та под╕бн╕\n" +"\n" +"Програмн╕ продукти складаються з компонент, розроблених р╕зними\n" +"ф╕зичними чи юридичними особами. Б╕льш╕сть компонент керуються\n" +"терм╕нами та умовами загально╖ публ╕чно╖ л╕ценз╕╖ GNU (GNU General\n" +"Public Licence), яку ми надал╕ будемо називати в даному документ╕ GPL,\n" +"або под╕бними до дано╖ л╕ценз╕ями. Б╕льш╕сть таких л╕ценз╕й Б╕льш╕сть\n" +"з цих л╕ценз╕й дозволяють використання, дублювання, прийняття та\n" +"перерозповсюдження складових частин, як╕ вони регулюють. Будь-ласка,\n" +"ознайомтесь уважно з терм╕нами та умовами л╕ценз╕йних умов для кожно╖\n" +"складово╖ частини перш, н╕ж використовувати будь-яку з\n" +"частин. Будь-як╕ запитання стосовно л╕ценз╕╖ на окрему складову\n" +"частину мають адресуватися автору ц╕╓╖ складово╖ частини, а не до\n" +"MandrakeSoft. Програми, розроблен╕ MandrakeSoft S.A. керуються\n" +"л╕ценз╕╓ю GPL. Документац╕я, розроблена MandrakeSoft S.A. керу╓ться\n" +"спец╕альною л╕ценз╕╓ю. Зверн╕ться, будь-ласка, до документац╕╖ за\n" +"подробицями.\n" +"\n" +"4. Права ╕нтелектуально╖ власност╕\n" +"\n" +"Вс╕ права на складов╕ компоненти Програмних продукт╕в належать\n" +"в╕дпов╕дним авторам ╕ захищен╕ законами про ╕нтелектуальну власн╕сть\n" +"та права на коп╕ювання, як╕ мають застосування до програмного\n" +"забезпечення. MandrakeSoft S.A. залиша╓ за собою право зм╕нювати чи\n" +"адаптувати Програмн╕ продукти як в ц╕лому, так ╕ окремими частинами з\n" +"будь-якою метою ╕ для будь-яких ц╕лей. \"Mandrake\", \"Mandrake Linux\" та\n" +"в╕дпов╕дн╕ логотипи ╓ торг╕вельними марками MandarakeSoft S.A.\n" +"\n" +"5. Законодавство\n" +"\n" +"Якщо будь-який розд╕л ц╕╓╖ угоди признаний нед╕йсним, таким, що не\n" +"в╕дпов╕да╓ законодавству чи нев╕дпов╕дним щодо судово╖ постанови, цей\n" +"розд╕л угоди видаля╓ться з даного контракту. Ви залиша╓тесь зв'язаними\n" +"╕ншими секц╕ями ц╕╓╖ угоди, як╕ ще мають застосування. Терм╕ни та\n" +"умови ц╕╓╖ Л╕ценз╕╖ керуються Законодавством Франц╕╖. Вс╕ сп╕рн╕\n" +"питання щодо терм╕н╕в та умов ц╕╓╖ л╕ценз╕╖ будуть розв'язуватися по\n" +"можливост╕ поза межами судових установ. В крайн╕х випадках сп╕рн╕\n" +"питання будуть вир╕шуватися в╕дпов╕дним Законним Судом Парижа -\n" +"Франц╕я.\n" +"\n" +"З будь-якими питаннями щодо цього документа звертайтеся, будь-ласка,\n" +"до MandrakeSoft S.A.\n" + +#: ../../standalone/draksplash:1 +#, c-format +msgid "" +"the progress bar x coordinate\n" +"of its upper left corner" +msgstr "" + +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "Current interface configuration" +msgstr "Зм╕нити конф╕гурац╕ю принтера" + +#: ../../printer/data.pm:1 +#, c-format +msgid "LPD - Line Printer Daemon" +msgstr "LPD - Line Printer Daemon" + +#: ../../network/isdn.pm:1 +#, c-format +msgid "" +"\n" +"If you have an ISA card, the values on the next screen should be right.\n" +"\n" +"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your " +"card.\n" +msgstr "" +"\n" +"Якщо Ви ма╓те плату ISA, значення на наступному екран╕ мають бути\n" +"коректними.\n" +"\n" +"Якщо Ви ма╓те плату PCMCIA, Ви повинн╕ знати IRQ та IO Вашо╖ плати.\n" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Do not print any test page" +msgstr "Друк тестових стор╕нок" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Gurmukhi" +msgstr "" + +#: ../../any.pm:1 +#, c-format +msgid "Force No APIC" +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "This password is too short (it must be at least %d characters long)" +msgstr "" +"Цей пароль занадто простий (в╕н повинен бути хоча б %d л╕тер завдовжки)" + +#: ../../standalone.pm:1 +#, fuzzy, c-format +msgid "[keyboard]" +msgstr "Клав╕атура" + +#: ../../network/network.pm:1 +#, c-format +msgid "FTP proxy" +msgstr "Прокс╕ FTP" + +#: ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "Install List" +msgstr "Встановити систему" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "" +"Change\n" +"Restore Path" +msgstr "В╕дновити з файлу" + +#: ../../standalone/logdrake:1 +#, fuzzy, c-format +msgid "Show only for the selected day" +msgstr "Показувати лише для цього дня" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "" +"drakTermServ Overview\n" +"\t\t\t \n" +" - Create Etherboot Enabled Boot Images:\n" +" \t\tTo boot a kernel via etherboot, a special kernel/initrd image " +"must be created.\n" +" \t\tmkinitrd-net does much of this work and drakTermServ is just a " +"graphical interface\n" +" \t\tto help manage/customize these images.\n" +"\n" +" - Maintain /etc/dhcpd.conf:\n" +" \t\tTo net boot clients, each client needs a dhcpd.conf entry, " +"assigning an IP address\n" +" \t\tand net boot images to the machine. drakTermServ helps create/" +"remove these entries.\n" +"\t\t\t\n" +" \t\t(PCI cards may omit the image - etherboot will request the " +"correct image. You should\n" +" \t\talso consider that when etherboot looks for the images, it " +"expects names like\n" +" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" +"\t\t\t \n" +" \t\tA typical dhcpd.conf stanza to support a diskless client looks " +"like:\n" +" \t\t\n" +"\t\t\t\thost curly {\n" +"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n" +"\t\t\t\t\tfixed-address 192.168.192.3;\n" +"\t\t\t\t\t#type fat;\n" +"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk." +"nbi\";\n" +"\t\t\t\t}\n" +"\t\t\t\n" +"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific " +"entry for\n" +"\t\t\ta client machine, using a fixed address scheme facilitates using the " +"functionality\n" +"\t\t\tof client-specific configuration files that ClusterNFS provides.\n" +"\t\t\t\n" +"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can " +"either be \"thin\"\n" +"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, " +"while fat clients run most\n" +"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\" +"$IP=client_ip\\$\\$ is\n" +"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and " +"gdm.conf are modified\n" +"\t\t\tif thin clients are used, to enable xdmcp. Since there are security " +"issues in using xdmcp,\n" +"\t\t\thosts.deny and hosts.allow are modified to limit access to the local " +"subnet.\n" +"\t\t\t\n" +"\t\t\tNote: You must stop/start the server after adding or changing " +"clients.\n" +"\t\t\t\n" +" - Maintain /etc/exports:\n" +" \t\tClusternfs allows export of the root filesystem to diskless " +"clients. drakTermServ\n" +" \t\tsets up the correct entry to allow anonymous access to the root " +"filesystem from\n" +" \t\tdiskless clients.\n" "\n" -"3. Л╕ценз╕я GPL та под╕бн╕\n" +" \t\tA typical exports entry for clusternfs is:\n" +" \t\t\n" +" \t\t/ (ro,all_squash)\n" +" \t\t/home SUBNET/MASK(rw,root_squash)\n" +"\t\t\t\n" +"\t\t\tWith SUBNET/MASK being defined for your network.\n" +" \t\t\n" +" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n" +" \t\tFor users to be able to log into the system from a diskless " +"client, their entry in\n" +" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$" +"\\$. drakTermServ helps\n" +" \t\tin this respect by adding or removing system users from this " +"file.\n" "\n" -"Програмн╕ продукти складаються з компонент, розроблених р╕зними\n" -"ф╕зичними чи юридичними особами. Б╕льш╕сть компонент керуються\n" -"терм╕нами та умовами загально╖ публ╕чно╖ л╕ценз╕╖ GNU (GNU General\n" -"Public Licence), яку ми надал╕ будемо називати в даному документ╕ GPL,\n" -"або под╕бними до дано╖ л╕ценз╕ями. Б╕льш╕сть таких л╕ценз╕й Б╕льш╕сть\n" -"з цих л╕ценз╕й дозволяють використання, дублювання, прийняття та\n" -"перерозповсюдження складових частин, як╕ вони регулюють. Будь-ласка,\n" -"ознайомтесь уважно з терм╕нами та умовами л╕ценз╕йних умов для кожно╖\n" -"складово╖ частини перш, н╕ж використовувати будь-яку з\n" -"частин. Будь-як╕ запитання стосовно л╕ценз╕╖ на окрему складову\n" -"частину мають адресуватися автору ц╕╓╖ складово╖ частини, а не до\n" -"MandrakeSoft. Програми, розроблен╕ MandrakeSoft S.A. керуються\n" -"л╕ценз╕╓ю GPL. Документац╕я, розроблена MandrakeSoft S.A. керу╓ться\n" -"спец╕альною л╕ценз╕╓ю. Зверн╕ться, будь-ласка, до документац╕╖ за\n" -"подробицями.\n" +" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n" +" \t\tThrough clusternfs, each diskless client can have it's own " +"unique configuration files\n" +" \t\ton the root filesystem of the server. In the future drakTermServ " +"will help create these\n" +" \t\tfiles.\n" "\n" -"4. Права ╕нтелектуально╖ власност╕\n" +" - Per client system configuration files:\n" +" \t\tThrough clusternfs, each diskless client can have it's own " +"unique configuration files\n" +" \t\ton the root filesystem of the server. In the future, " +"drakTermServ can help create files\n" +" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/" +"keyboard on a per-client\n" +" \t\tbasis.\n" "\n" -"Вс╕ права на складов╕ компоненти Програмних продукт╕в належать\n" -"в╕дпов╕дним авторам ╕ захищен╕ законами про ╕нтелектуальну власн╕сть\n" -"та права на коп╕ювання, як╕ мають застосування до програмного\n" -"забезпечення. MandrakeSoft S.A. залиша╓ за собою право зм╕нювати чи\n" -"адаптувати Програмн╕ продукти як в ц╕лому, так ╕ окремими частинами з\n" -"будь-якою метою ╕ для будь-яких ц╕лей. \"Mandrake\", \"Mandrake Linux\" та\n" -"в╕дпов╕дн╕ логотипи ╓ торг╕вельними марками MandarakeSoft S.A.\n" +" - /etc/xinetd.d/tftp:\n" +" \t\tdrakTermServ will configure this file to work in conjunction " +"with the images created by\n" +" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up " +"the boot image to each\n" +" \t\tdiskless client.\n" "\n" -"5. Законодавство\n" +" \t\tA typical tftp configuration file looks like:\n" +" \t\t\n" +" \t\tservice tftp\n" +" \t\t(\n" +" disable = no\n" +" socket_type = dgram\n" +" protocol = udp\n" +" wait = yes\n" +" user = root\n" +" server = /usr/sbin/in.tftpd\n" +" server_args = -s /var/lib/tftpboot\n" +" \t\t}\n" +" \t\t\n" +" \t\tThe changes here from the default installation are changing the " +"disable flag to\n" +" \t\t'no' and changing the directory path to /var/lib/tftpboot, where " +"mkinitrd-net\n" +" \t\tputs it's images.\n" "\n" -"Якщо будь-який розд╕л ц╕╓╖ угоди признаний нед╕йсним, таким, що не\n" -"в╕дпов╕да╓ законодавству чи нев╕дпов╕дним щодо судово╖ постанови, цей\n" -"розд╕л угоди видаля╓ться з даного контракту. Ви залиша╓тесь зв'язаними\n" -"╕ншими секц╕ями ц╕╓╖ угоди, як╕ ще мають застосування. Терм╕ни та\n" -"умови ц╕╓╖ Л╕ценз╕╖ керуються Законодавством Франц╕╖. Вс╕ сп╕рн╕\n" -"питання щодо терм╕н╕в та умов ц╕╓╖ л╕ценз╕╖ будуть розв'язуватися по\n" -"можливост╕ поза межами судових установ. В крайн╕х випадках сп╕рн╕\n" -"питання будуть вир╕шуватися в╕дпов╕дним Законним Судом Парижа -\n" -"Франц╕я.\n" +" - Create etherboot floppies/CDs:\n" +" \t\tThe diskless client machines need either ROM images on the NIC, " +"or a boot floppy\n" +" \t\tor CD to initate the boot sequence. drakTermServ will help " +"generate these images,\n" +" \t\tbased on the NIC in the client machine.\n" +" \t\t\n" +" \t\tA basic example of creating a boot floppy for a 3Com 3c509 " +"manually:\n" +" \t\t\n" +" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n" +" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n" +" \n" "\n" -"З будь-якими питаннями щодо цього документа звертайтеся, будь-ласка,\n" -"до MandrakeSoft S.A.\n" +msgstr "" -#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1 +#: ../../Xconfig/card.pm:1 #, c-format -msgid "Entering step `%s'\n" -msgstr "Почина╓ться крок `%s'\n" +msgid "512 kB" +msgstr "512 кб" -#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1 -#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1 -#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1 -#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1 -#: ../../standalone/harddrake2:1 +#: ../../standalone/net_monitor:1 #, c-format -msgid "Help" -msgstr "Дов╕дка" +msgid "Logs" +msgstr "" -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 +#: ../../standalone/scannerdrake:1 +#, c-format +msgid "(Note: Parallel ports cannot be auto-detected)" +msgstr "" + +#: ../../standalone/logdrake:1 +#, c-format +msgid "N" +msgstr "N" + +#: ../../network/isdn.pm:1 +#, c-format +msgid "What kind of card do you have?" +msgstr "Який тип картки Ви ма╓те" + +#: ../../standalone/logdrake:1 +#, c-format +msgid "O" +msgstr "O" + +#: ../../install_steps_interactive.pm:1 ../../steps.pm:1 +#, c-format +msgid "Security" +msgstr "Безпека" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "" +"You can also use the graphical interface \"xpdq\" for setting options and " +"handling printing jobs.\n" +"If you are using KDE as desktop environment you have a \"panic button\", an " +"icon on the desktop, labeled with \"STOP Printer!\", which stops all print " +"jobs immediately when you click it. This is for example useful for paper " +"jams.\n" +msgstr "" + +#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 +#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 +#, c-format +msgid "Q" +msgstr "Q" + +#: ../../standalone/harddrake2:1 #, fuzzy, c-format -msgid "not configured" -msgstr "перенастро╖ти" +msgid "Unknown" +msgstr "Нев╕дома модель" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "This server is already in the list, it cannot be added again.\n" +msgstr "" -#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1 -#: ../../standalone/drakboot:1 ../../standalone/drakgw:1 +#: ../../network/netconnect.pm:1 ../../network/tools.pm:1 #, c-format -msgid "Configure" -msgstr "Настро╖ти" +msgid "Network Configuration" +msgstr "Конф╕гурац╕я мереж╕" -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 +#: ../../standalone/logdrake:1 #, c-format -msgid "Go on anyway?" -msgstr "Все-таки продовжувати?" +msgid "S" +msgstr "S" -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 +#: ../../network/isdn.pm:1 #, c-format -msgid "There was an error installing packages:" -msgstr "Сталася помилка п╕д час установки пакет╕в: " +msgid "" +"Protocol for the rest of the world\n" +"No D-Channel (leased lines)" +msgstr "" +"Протокол для всього ╕ншого св╕ту \n" +" без D-каналу (вид╕лених л╕н╕й)" -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "There was an error ordering packages:" -msgstr "Сталася помилка п╕д час сортування пакет╕в: " +msgid "Option %s must be a number!" +msgstr "Параметр %s ма╓ бути числом!" -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 +#: ../../standalone/drakboot:1 ../../standalone/draksplash:1 +#, fuzzy, c-format +msgid "Notice" +msgstr "БезВ╕део" + +#: ../../security/help.pm:1 #, c-format msgid "" -"Change your Cd-Rom!\n" +"Arguments: (arg)\n" "\n" -"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " -"done.\n" -"If you don't have it, press Cancel to avoid installation from this Cd-Rom." +" Activate/Disable daily security check." msgstr "" -"Зм╕н╕ть компакт-диск!\n" -"\n" -"Будь-ласка, вставте компакт-диск, позначений \"%s\" у пристр╕й ╕\n" -"натисн╕ть Гаразд п╕сля цього.\n" + +#: ../../security/help.pm:1 +#, c-format +msgid "" +"Arguments: (arg)\n" "\n" -"Якщо ви не ма╓те такого диску, натисн╕ть В╕дм╕нити, щоб не\n" -"встановлювати з цього диску." +"Enable/Disable crontab and at for users. Put allowed users in /etc/cron." +"allow and /etc/at.allow\n" +"(see man at(1) and crontab(1))." +msgstr "" -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "Refuse" -msgstr "В╕дкинути" +msgid "You have not configured X. Are you sure you really want this?" +msgstr "" -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 -#: ../../standalone/drakautoinst:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Accept" -msgstr "Прийняти" +msgid "" +"The configuration of the printer will work fully automatically. If your " +"printer was not correctly detected or if you prefer a customized printer " +"configuration, turn on \"Manual configuration\"." +msgstr "" -#: ../../install_steps_gtk.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Installing package %s" -msgstr "Установка пакету %s" +msgid "What type of partitioning?" +msgstr "Тип п╕дрозд╕л╕в?" -#: ../../install_steps_gtk.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "%d packages" -msgstr "%d пакети" +msgid "" +"file list sent by FTP: %s\n" +" " +msgstr "" -#: ../../install_steps_gtk.pm:1 -#, fuzzy, c-format -msgid "No details" -msgstr "Подробиц╕" +#: ../../standalone/drakconnect:1 +#, c-format +msgid "Interface" +msgstr "╤нтерфейс" -#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1 -#: ../../diskdrake/smbnfs_gtk.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Details" -msgstr "Подробиц╕" +msgid "" +"Options Description:\n" +"\n" +" - Backup System Files:\n" +" \n" +"\tThis option allows you to backup your /etc directory,\n" +"\twhich contains all configuration files. Please be\n" +"\tcareful during the restore step to not overwrite:\n" +"\t\t/etc/passwd \n" +"\t\t/etc/group \n" +"\t\t/etc/fstab\n" +"\n" +" - Backup User Files: \n" +"\n" +"\tThis option allows you select all users that you want to \n" +"\tbackup. To preserve disk space, it is recommended that\n" +"\tyou do not include the web browser's cache.\n" +"\n" +" - Backup Other Files: \n" +"\n" +"\tThis option allows you to include additional data to save.\n" +"\tIf you want to add individual files, select them from the\n" +"\trighthand 'Files' list pane. To add directories, enter the \n" +"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n" +"\tand at that point click 'OK' without selecting any files.\n" +" \n" +" - Incremental Backups:\n" +"\n" +"\tThe incremental backup is the most powerful option for \n" +"\tbackup. This option allows you to backup all your data \n" +"\tthe first time, and only the changed data afterward.\n" +"\tThen you will be able, during the restore step, to restore \n" +"\tyour data from a specified date. If you have not selected \n" +"\tthis option all old backups are deleted before each backup. \n" +"\n" +" - Differential Backups:\n" +" \n" +"\tThe differential backup, rather than comparing changes in the\n" +"\tdata to the previous incremental backup, always compares the\n" +"\tdata to the initial base backup. This method allows one to\n" +"\trestore the base and then the differential from a certain date.\n" +"\n" +msgstr "" -#: ../../install_steps_gtk.pm:1 +#: ../../security/help.pm:1 #, c-format -msgid "Please wait, preparing installation..." -msgstr "Зачекайте, ╕де п╕дготовка установки" +msgid "" +"Arguments: (arg, expr='*.*', dev='tty12')\n" +"\n" +"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n" +"expression describing what to log (see syslog.conf(5) for more details) and\n" +"dev the device to report the log." +msgstr "" -#: ../../install_steps_gtk.pm:1 +#: ../../modules/parameters.pm:1 +#, fuzzy, c-format +msgid "comma separated strings" +msgstr "Форматувати п╕дрозд╕ли" + +#: ../../standalone/scannerdrake:1 #, c-format -msgid "Time remaining " -msgstr "Залишок часу " +msgid "These are the machines from which the scanners should be used:" +msgstr "" -#: ../../install_steps_gtk.pm:1 +#: ../../standalone/logdrake:1 +#, fuzzy, c-format +msgid "Messages" +msgstr "пов╕домлення" + +#: ../../harddrake/v4l.pm:1 #, c-format -msgid "Estimating" -msgstr "Наближене обчислення" +msgid "Unknown|CPH06X (bt878) [many vendors]" +msgstr "" -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 +#: ../../network/drakfirewall.pm:1 +#, fuzzy, c-format +msgid "POP and IMAP Server" +msgstr "Сервер LDAP" + +#: ../../lang.pm:1 #, c-format -msgid "Installing" -msgstr "Встановлюю" +msgid "Mexico" +msgstr "Мексика" -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "Model stepping" +msgstr "форматування" + +#: ../../lang.pm:1 #, c-format -msgid "Choose the packages you want to install" -msgstr "Вибер╕ть пакети, як╕ ви хочете встановити" +msgid "Rwanda" +msgstr "Руанда" -#: ../../install_steps_gtk.pm:1 +#: ../../modules/interactive.pm:1 #, c-format -msgid "Minimal install" -msgstr "М╕н╕мальна установка" +msgid "Do you have any %s interfaces?" +msgstr "Чи ви ма╓те будь-як╕ %s ╕нтерфейси?" -#: ../../install_steps_gtk.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Updating package selection" -msgstr "Зберегти виб╕р пакет╕в" +msgid "Switzerland" +msgstr "Швейцар╕я" -#: ../../install_steps_gtk.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Load/Save on floppy" -msgstr "Прочитати/записати з/на дискету" +msgid "Brunei Darussalam" +msgstr "Брунейський Даруссалам" -#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1 -#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1 #: ../../printer/printerdrake.pm:1 #, c-format -msgid "<- Previous" -msgstr "<- Попередн╕й" +msgid "Remote lpd Printer Options" +msgstr "Опц╕╖ в╕ддаленого принтера" -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 -#: ../../standalone/drakbackup:1 +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"GNU/Linux is a multi-user system, meaning each user may have their own\n" +"preferences, their own files and so on. You can read the ``Starter Guide''\n" +"to learn more about multi-user systems. But unlike \"root\", who is the\n" +"system administrator, the users you add at this point will not be\n" +"authorized to change anything except their own files and their own\n" +"configurations, protecting the system from unintentional or malicious\n" +"changes that impact on the system as a whole. You will have to create at\n" +"least one regular user for yourself -- this is the account which you should\n" +"use for routine, day-to-day use. Although it is very easy to log in as\n" +"\"root\" to do anything and everything, it may also be very dangerous! A\n" +"very simple mistake could mean that your system will not work any more. If\n" +"you make a serious mistake as a regular user, the worst that will happen is\n" +"that you will lose some information, but not affect the entire system.\n" +"\n" +"The first field asks you for a real name. Of course, this is not mandatory\n" +"-- you can actually enter whatever you like. DrakX will use the first word\n" +"you typed in this field and copy it to the \"%s\" field, which is the name\n" +"this user will enter to log onto the system. If you like, you may override\n" +"the default and change the username. The next step is to enter a password.\n" +"From a security point of view, a non-privileged (regular) user password is\n" +"not as crucial as the \"root\" password, but that is no reason to neglect\n" +"it by making it blank or too simple: after all, your files could be the\n" +"ones at risk.\n" +"\n" +"Once you click on \"%s\", you can add other users. Add a user for each one\n" +"of your friends: your father or your sister, for example. Click \"%s\" when\n" +"you have finished adding users.\n" +"\n" +"Clicking the \"%s\" button allows you to change the default \"shell\" for\n" +"that user (bash by default).\n" +"\n" +"When you have finished adding users, you will be asked to choose a user\n" +"that can automatically log into the system when the computer boots up. If\n" +"you are interested in that feature (and do not care much about local\n" +"security), choose the desired user and window manager, then click \"%s\".\n" +"If you are not interested in this feature, uncheck the \"%s\" box." +msgstr "" +"GNU/Linux - багатокористувацька система, ╕ це означа╓, що кожен з\n" +"користувач╕в може мати сво╖ власн╕ установки, власн╕ файли, тощо. Щоб\n" +"б╕льше д╕знатися про це Ви можете прочитати П╕дручник користувача з\n" +"системи. Але на в╕дм╕ну в╕д користувача Root, який ╓ адм╕н╕стратором\n" +"системи, користувач╕, яких Ви будете створювати на цьому кроц╕, не\n" +"мають права зм╕нювати н╕чого в систем╕ кр╕м сво╖х власних файл╕в ╕\n" +"власно╖ конф╕╜урац╕╖. Ви ма╓те створити рахунок для хоча б одного\n" +"╓диного користувача - для самого себе. Ви будете користуватися цим\n" +"рахунком для того, щоб виконувати щоденн╕ задач╕. ╤ хоча це ╕ дуже\n" +"зручно ре╓струватись в систем╕ як Root, але одночасно це ╕ дуже\n" +"небезпечно! Найменша помилка може призвести до того, що система буде\n" +"неробочою. Якщо Ви помилитесь як звичайний користувач, Ви можете,\n" +"звичайно, втратити деяк╕ сво╖ дан╕, але не всю систему.\n" +"\n" +"Спочатку надрукуйте сво╓ повне ╕м'я. Це не обов'язково, Ви можете\n" +"надрукувати все, що завгодно. drakx пот╕м в╕зьме перше слово ╕\n" +"використа╓ його як ╕м'я користувача. Це - ╕м'я п╕д яким користувач\n" +"буде ре╓струватись у систем╕. Ви можете зм╕нити це ╕м'я. Пот╕м Ви\n" +"ма╓те ввести пароль. Пароль звичайного (не root) користувача не така\n" +"критична р╕ч, як пароль адм╕н╕стратора, але все-одно нема╓ причин для\n" +"того, щоб нехтувати ним. Врешт╕-решт, це загрожу╓ Вашим власним\n" +"файлам. \n" +"\n" +"П╕сля того, як Ви натиснете на кнопку Прийняти користувача, Ви можете\n" +"створити ще багато ╕нших користувач╕в. Створ╕ть рахунки для кожного з\n" +"Ваших друз╕в, для тата й сестри, наприклад. П╕сля того, як створено\n" +"вс╕ потр╕бн╕ рахунки користувач╕в, натисн╕ть клав╕шу Зак╕нчено.\n" +"\n" +"Якщо Ви натиснете на кнопку Додатково, Ви будете мати можлив╕сть\n" +"встановити командну оболонку даного користувача (неявно встановлю╓ться\n" +"bash). " + +#: ../../standalone/drakconnect:1 #, c-format -msgid "Install" -msgstr "Установка" +msgid "Configure Internet Access..." +msgstr "Настро╖ти доступ до ╕нтернету..." + +#: ../../crypto.pm:1 ../../lang.pm:1 +#, fuzzy, c-format +msgid "Norway" +msgstr "Норвезька" -#: ../../install_steps_gtk.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Show automatically selected packages" -msgstr "Показувати автоматично вибран╕ пакети" +msgid "Danish" +msgstr "Датська" -#: ../../install_steps_gtk.pm:1 +#: ../../services.pm:1 #, c-format -msgid "You can't unselect this package. It must be upgraded" -msgstr "Виб╕р цього пакету неможливо в╕дм╕нити. В╕н повинен бути поновлений." +msgid "" +"Automatically switch on numlock key locker under console\n" +"and XFree at boot." +msgstr "" +"Автоматично включити NumLock на консол╕ ╕ в XFree \n" +"при завантаженн╕" -#: ../../install_steps_gtk.pm:1 +#: ../../network/network.pm:1 #, c-format msgid "" -"This package must be upgraded.\n" -"Are you sure you want to deselect it?" +"Please enter the IP configuration for this machine.\n" +"Each item should be entered as an IP address in dotted-decimal\n" +"notation (for example, 1.2.3.4)." msgstr "" -"Цей пакет повинен бути поновлений\n" -"Ви справд╕ хочете в╕дм╕нити його виб╕р?" +"Введ╕ть, будь-ласка, конф╕гурац╕ю IP для ц╕╓╖ машини. Кожен пункт\n" +"треба вводити як IP адресу в точково-десятков╕й нотац╕╖ (як,\n" +"наприклад, 1.2.3.4)" -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "You can't unselect this package. It is already installed" -msgstr "Виб╕р цього пакету неможливо в╕дм╕нити. Його вже встановлено." +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n" +"knows if a selected package is located on another CD-ROM so it will eject\n" +"the current CD and ask you to insert the correct CD as required." +msgstr "" +"Дистрибутив Мандрейк Л╕накс розм╕щений на к╕лькох\n" +"компакт-дисках. Можливо, drakX вибрав пакети, що знаходяться на ╕нших\n" +"дисках (в╕дм╕нних в╕д установочного). Коли для установки буде потр╕бен\n" +"╕нший диск, програма витягне даний компакт-диск ╕ попросить вставити\n" +"потр╕бний. " -#: ../../install_steps_gtk.pm:1 +#: ../../harddrake/data.pm:1 #, c-format -msgid "This is a mandatory package, it can't be unselected" -msgstr "Цей пакет необх╕дний. Не можна в╕дм╕нити його виб╕р" +msgid "Processors" +msgstr "" -#: ../../install_steps_gtk.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "You can't select/unselect this package" -msgstr "Не можна вибрати або в╕дм╕нити виб╕р цього пакету." +msgid "Bulgaria" +msgstr "Болгар╕я" -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "The following packages are going to be removed" -msgstr "Ц╕ пакети будуть де╕нстальованими" +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "No NIC selected!" +msgstr "Нема╓ з'╓днання" -#: ../../install_steps_gtk.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "The following packages are going to be installed" -msgstr "Ц╕ пакети будуть встановленими" +msgid "Svalbard and Jan Mayen Islands" +msgstr "Свальбард╕йськ╕ ╕ Ян Майеньск╕ острови" -#: ../../install_steps_gtk.pm:1 +#: ../../network/netconnect.pm:1 #, c-format msgid "" -"You can't select this package as there is not enough space left to install it" -msgstr "Вибрати цей пакет неможливо. Для його установки не вистача╓ м╕сця." - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "Importance: %s\n" -msgstr "Важлив╕сть: %s\n" - -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "Size: %d KB\n" -msgstr "Розм╕р: %d КБ\n" +"Problems occured during configuration.\n" +"Test your connection via net_monitor or mcc. If your connection doesn't " +"work, you might want to relaunch the configuration." +msgstr "" -#: ../../install_steps_gtk.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Version: %s\n" -msgstr "Верс╕я: %s\n" +msgid "partition %s is now known as %s" +msgstr "" -#: ../../install_steps_gtk.pm:1 -#, c-format -msgid "Name: %s\n" -msgstr "Назва: %s\n" +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Backup Other files..." +msgstr "Поганий резервний файл" -#: ../../install_steps_gtk.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Bad package" -msgstr "Пакети неробоч╕" +msgid "SMB server IP" +msgstr "IP адреса SMB сервера" -#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1 -#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1 +#: ../../lang.pm:1 #, c-format -msgid "Other" -msgstr "╤нш╕" +msgid "Congo (Kinshasa)" +msgstr "" -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Total size: %d / %d MB" -msgstr "Загальний розм╕р: %d / %d Мб " +msgid "Partition table of drive %s is going to be written to disk!" +msgstr "Таблиця п╕дрозд╕л╕в диску %s буде записано на диск" -#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1 -#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1 #: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Next ->" -msgstr "Дал╕ ->" - -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 -#, c-format -msgid "Individual package selection" -msgstr "╤ндив╕дульний виб╕р пакет╕в" +#, fuzzy, c-format +msgid "Installing HPOJ package..." +msgstr "Установка пакету %s" -#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 +#: ../../any.pm:1 #, c-format -msgid "Package Group Selection" -msgstr "Виб╕р груп пакет╕в" +msgid "" +"A custom bootdisk provides a way of booting into your Linux system without\n" +"depending on the normal bootloader. This is useful if you don't want to " +"install\n" +"LILO (or grub) on your system, or another operating system removes LILO, or " +"LILO doesn't\n" +"work with your hardware configuration. A custom bootdisk can also be used " +"with\n" +"the Mandrake rescue image, making it much easier to recover from severe " +"system\n" +"failures. Would you like to create a bootdisk for your system?\n" +"%s" +msgstr "" +"Спец╕ально створений диск для завантаження забезпечить Вам можлив╕сть\n" +"запуску системи незалежно в╕д звичайного завантажувача. Це може\n" +"знадобитися у тих випадках, коли Ви не бажа╓те встановлювати LILO (або\n" +"grub) в сво╖й систем╕, або коли ╕нша операц╕йна система \"перетира╓\"\n" +"LILO, або коли LILO не працю╓ з новою конф╕гурац╕╓ю апаратних\n" +"засоб╕в. Авар╕йний диск може також використовуватися разом з Mandrake\n" +"авар╕йним диском, що робить в╕дновлення в╕д серйозних системних крах╕в\n" +"набагато прост╕шим. Чи бажа╓те Ви створити авар╕йний диск для сво╓╖\n" +"системи?\n" +"%s" -#: ../../install_steps_gtk.pm:1 +#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format -msgid "" -"Your system is low on resources. You may have some problem installing\n" -"Mandrake Linux. If that occurs, you can try a text install instead. For " -"this,\n" -"press `F1' when booting on CDROM, then enter `text'." +msgid ", USB printer \\#%s" msgstr "" -"Ваша система ма╓ замало ресурс╕в. Ви можете мати проблеми з установкою\n" -"Mandrake Л╕накса. Якщо це станеться, ви можете спробувати установку в\n" -"текстовому режим╕. Для цього п╕д час завантаження компакт-диску\n" -"натисн╕ть F1 ╕ пот╕м введ╕ть \"text\"." -#: ../../install_steps_interactive.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Save packages selection" -msgstr "Зберегти виб╕р пакет╕в" +msgid "Latvian" +msgstr "Латв╕йська" -#: ../../install_steps_interactive.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Automated" -msgstr "Автоматизована" +msgid "monthly" +msgstr "" -#: ../../install_steps_interactive.pm:1 +#: ../../standalone/drakfloppy:1 #, c-format -msgid "Replay" -msgstr "Повторити" +msgid "Module name" +msgstr "Назва модуля" -#: ../../install_steps_interactive.pm:1 +#: ../../network/network.pm:1 +#, fuzzy, c-format +msgid "Start at boot" +msgstr "Стартувати при завантаженн╕" + +#: ../../standalone/drakbackup:1 #, c-format -msgid "" -"The auto install can be fully automated if wanted,\n" -"in that case it will take over the hard drive!!\n" -"(this is meant for installing on another box).\n" -"\n" -"You may prefer to replay the installation.\n" +msgid "Use Incremental Backups" msgstr "" -"Якщо потр╕бно, автоматизована установка може бути повн╕стю\n" -"автоматично. В цьому випадку установка буде мати повний контроль над\n" -"вашим диском!! (Такий тип установки в основному п╕дходить для\n" -"установки на ╕нш╕й систем╕)\n" -"\n" -"Можливо ви захочете повторити установку.\n" -#: ../../install_steps_interactive.pm:1 +#: ../../any.pm:1 #, c-format -msgid "Generate auto install floppy" -msgstr "Створення автоустановочно╖ дискети" - -#: ../../install_steps_interactive.pm:1 -#, fuzzy, c-format -msgid "Reboot" -msgstr "Root" +msgid "First sector of drive (MBR)" +msgstr "Перший сектор диску (MBR)" -#: ../../install_steps_interactive.pm:1 +#: ../../harddrake/data.pm:1 #, c-format -msgid "" -"Some steps are not completed.\n" -"\n" -"Do you really want to quit now?" +msgid "Joystick" msgstr "" -"Деяк╕ кроки не завершен╕.\n" -"\n" -"Ви д╕йсно хочете припинити зараз?" -#: ../../install_steps_interactive.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Creating auto install floppy..." -msgstr "Створення автоустановочно╖ дискети" +msgid "El Salvador" +msgstr "Ель Сальвадор" -#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1 +#: ../../any.pm:1 ../../help.pm:1 #, c-format -msgid "Insert a blank floppy in drive %s" -msgstr "Вставте чисту дискету в дисков╕д %s" +msgid "Use Unicode by default" +msgstr "" -#: ../../install_steps_interactive.pm:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "" -"You may need to change your Open Firmware boot-device to\n" -" enable the bootloader. If you don't see the bootloader prompt at\n" -" reboot, hold down Command-Option-O-F at reboot and enter:\n" -" setenv boot-device %s,\\\\:tbxi\n" -" Then type: shut-down\n" -"At your next boot you should see the bootloader prompt." +msgid "the module of the GNU/Linux kernel that handles the device" msgstr "" -"Можливо вам потр╕бно зм╕нити пристр╕й завантаження у Open Firmware для\n" -"того, щоб дозволити роботу завантажувача. Якщо ви не бачите запрошення\n" -"завантажувача при завантаженн╕ системи, натисн╕ть Command-Option-O-F\n" -"при завантаженн╕ ╕ введ╕ть setenv boot-device %s,\\\\:tbxi. П╕сля\n" -"цього надрукуйте shut-down. При наступному завантаженн╕ ви побачите\n" -"п╕дказку завантажувача. " -#: ../../install_steps_interactive.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Installation of bootloader failed. The following error occured:" -msgstr "Установка завантажувача неусп╕шна. Сталася помилка:" +msgid "Trying to rescue partition table" +msgstr "Пробую в╕дновити таблицю п╕дрозд╕л╕в" -#: ../../install_steps_interactive.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Installing bootloader" -msgstr "Встановлюю блок завантаження" +msgid "Option %s must be an integer number!" +msgstr "Параметр %s ма╓ бути ц╕лим числом!" -#: ../../install_steps_interactive.pm:1 +#: ../../interactive/stdio.pm:1 #, c-format msgid "" -"Error installing aboot, \n" -"try to force installation even if that destroys the first partition?" +"Entries you'll have to fill:\n" +"%s" msgstr "" -"Помилка при встановленн╕ aboot,\n" -"попробувати встановити силою, нав╕ть якщо це розрушить перший п╕дрозд╕л?" -#: ../../install_steps_interactive.pm:1 +#: ../../standalone/livedrake:1 #, c-format -msgid "Do you want to use aboot?" -msgstr "Чи Ви хочете використовувати aboot?" +msgid "Unable to start live upgrade !!!\n" +msgstr "Не можу стартувати \"живе поновлення\"!!!\n" -#: ../../install_steps_interactive.pm:1 -#, fuzzy, c-format -msgid "" -"You appear to have an OldWorld or Unknown\n" -" machine, the yaboot bootloader will not work for you.\n" -"The install will continue, but you'll\n" -" need to use BootX or some other means to boot your machine" -msgstr "" -"Зда╓ться у Вас машина OldWorld чи Нев╕дома. Завантажувач yaboot не\n" -"буде працювати з ц╕╓ю машиною. Установка буде продовжуватись, але для\n" -"завантаження, Вам потр╕бно користуватись BootX." +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Name: " +msgstr "Назва: " -#: ../../install_steps_interactive.pm:1 +#: ../../Xconfig/resolution_and_depth.pm:1 #, c-format -msgid "Preparing bootloader..." -msgstr "Встановлюю завантажувальний блок" +msgid "16 million colors (24 bits)" +msgstr "16 м╕льйон╕в кольор╕в (24 б╕т)" -#: ../../install_steps_interactive.pm:1 +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "Allow all users" +msgstr "Додати користувача" + +#: ../../share/advertising/08-store.pl:1 #, c-format -msgid "Domain Admin Password" +msgid "The official MandrakeSoft Store" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, fuzzy, c-format -msgid "Domain Admin User Name" -msgstr "Назва домену" +#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Resizing" +msgstr "Зм╕нюю розм╕р" -#: ../../install_steps_interactive.pm:1 -#, fuzzy, c-format -msgid "Windows Domain" -msgstr "Домен NIS" +#: ../../network/netconnect.pm:1 +#, c-format +msgid "Cable connection" +msgstr "Кабельне з'╓днання" -#: ../../install_steps_interactive.pm:1 +#: ../../standalone/logdrake:1 #, fuzzy, c-format -msgid "Authentication Windows Domain" -msgstr "Автентикац╕я LDAP" +msgid "User" +msgstr "╤м'я користувача" -#: ../../install_steps_interactive.pm:1 -#, c-format +#: ../../fsedit.pm:1 +#, fuzzy, c-format msgid "" -"For this to work for a W2K PDC, you will probably need to have the admin " -"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" -"add and reboot the server.\n" -"You will also need the username/password of a Domain Admin to join the " -"machine to the Windows(TM) domain.\n" -"If networking is not yet enabled, Drakx will attempt to join the domain " -"after the network setup step.\n" -"Should this setup fail for some reason and domain authentication is not " -"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) " -"Domain, and Admin Username/Password, after system boot.\n" -"The command 'wbinfo -t' will test whether your authentication secrets are " -"good." +"I can't read the partition table of device %s, it's too corrupted for me :(\n" +"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" +"The other solution is to not allow DrakX to modify the partition table.\n" +"(the error is %s)\n" +"\n" +"Do you agree to loose all the partitions?\n" msgstr "" +"Не можу прочитати таблицю п╕дрозд╕л╕в, вона занадто з╕псована для мене\n" +":( Я спробую стерти з╕псован╕ п╕дрозд╕ли ╕ ВС╤ ДАН╤ будуть\n" +"втрачен╕. Проблем╕ можна також запоб╕гти, якщо заборонити DrakX\n" +"зм╕нювати таблицю п╕дрозд╕л╕в. (помилка: %s)\n" +"\n" +"Ви погоджу╓тесь втратити вс╕ п╕дрозд╕ли?\n" -#: ../../install_steps_interactive.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "NIS Server" -msgstr "Сервер NIS" +msgid "Do new backup before restore (only for incremental backups.)" +msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "NIS Domain" -msgstr "Домен NIS" +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Printer on parallel port \\#%s" +msgstr "Назва хоста принтера" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Authentication NIS" -msgstr "NIS автентикац╕я" +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "Name" +msgstr "Назва: " -#: ../../install_steps_interactive.pm:1 +#: ../../raid.pm:1 #, c-format -msgid "NIS" -msgstr "NIS" +msgid "mkraid failed" +msgstr "зб╕й у mkraid" #: ../../install_steps_interactive.pm:1 #, c-format -msgid "LDAP Server" -msgstr "Сервер LDAP" +msgid "Button 3 Emulation" +msgstr "Емуляц╕я 3 клав╕ш" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "LDAP Base dn" -msgstr "dn на основ╕LDAP " +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Sending files..." +msgstr "Записати в файл" -#: ../../install_steps_interactive.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Authentication LDAP" -msgstr "Автентикац╕я LDAP" +msgid "Israeli (Phonetic)" +msgstr "╤зра╖льська (фонетична)" -#: ../../install_steps_interactive.pm:1 +#: ../../any.pm:1 #, c-format -msgid "LDAP" -msgstr "LDAP" +msgid "access to rpm tools" +msgstr "" -#: ../../install_steps_interactive.pm:1 +#: ../../standalone/drakperm:1 #, c-format -msgid "Local files" -msgstr "Локальн╕ файли" +msgid "edit" +msgstr "" -#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1 -#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1 -#, c-format -msgid "Authentication" -msgstr "Автентикац╕я" +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "You must choose/enter a printer/device!" +msgstr "Введ╕ть URI пристрою принтера" -#: ../../install_steps_interactive.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "This password is too short (it must be at least %d characters long)" +msgid "Permission problem accessing CD." msgstr "" -"Цей пароль занадто простий (в╕н повинен бути хоча б %d л╕тер завдовжки)" -#. -PO: keep this short or else the buttons will not fit in the window -#: ../../install_steps_interactive.pm:1 +#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format -msgid "No password" -msgstr "Без паролю" +msgid "Phone number" +msgstr "Номер телефону" -#: ../../install_steps_interactive.pm:1 +#: ../../harddrake/sound.pm:1 #, c-format -msgid "Set root password" -msgstr "Встановити пароль root'а" +msgid "Error: The \"%s\" driver for your sound card is unlisted" +msgstr "" -#: ../../install_steps_interactive.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "You have not configured X. Are you sure you really want this?" -msgstr "" +msgid "Printer name, description, location" +msgstr "Назва, опис, розташування принтера" -#: ../../install_steps_interactive.pm:1 ../../services.pm:1 +#: ../../standalone/drakxtv:1 #, c-format -msgid "Services: %d activated for %d registered" +msgid "USA (broadcast)" msgstr "" -#: ../../install_steps_interactive.pm:1 ../../services.pm:1 -#, fuzzy, c-format -msgid "Services" -msgstr "Сервер" - -#: ../../install_steps_interactive.pm:1 ../../services.pm:1 #: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "System" -msgstr "Системний режим" - -#. -PO: example: lilo-graphic on /dev/hda1 -#: ../../install_steps_interactive.pm:1 -#, fuzzy, c-format -msgid "%s on %s" -msgstr "Порт" - -#: ../../install_steps_interactive.pm:1 -#, fuzzy, c-format -msgid "Bootloader" -msgstr "Використовувати завантажувач" +msgid "" +"Please choose the\n" +"media for backup." +msgstr "Вибер╕ть, будь-ласка, мову." -#: ../../install_steps_interactive.pm:1 -#, fuzzy, c-format -msgid "Boot" -msgstr "Root" +#: ../../Xconfig/card.pm:1 +#, c-format +msgid "Use Xinerama extension" +msgstr "Користуватися розширенням Xinerama" -#: ../../install_steps_interactive.pm:1 -#, fuzzy, c-format -msgid "disabled" -msgstr "заборонити" +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Loopback" +msgstr "Зворотн╓ монтування" -#: ../../install_steps_interactive.pm:1 -#, fuzzy, c-format -msgid "activated" -msgstr "актив╕зувати зараз" +#: ../../standalone/drakfloppy:1 +#, c-format +msgid "" +"Unable to properly close mkbootdisk: \n" +" %s \n" +" %s" +msgstr "" +"Не можу коректно завершити mkbootdisk: \n" +"%s\n" +"%s" -#: ../../install_steps_interactive.pm:1 +#: ../../standalone/drakxtv:1 #, fuzzy, c-format -msgid "Firewall" -msgstr "Firewall/Маршрутизатор" +msgid "West Europe" +msgstr "╢вропа" -#: ../../install_steps_interactive.pm:1 ../../steps.pm:1 +#: ../../standalone.pm:1 #, c-format -msgid "Security" -msgstr "Безпека" - -#: ../../install_steps_interactive.pm:1 -#, fuzzy, c-format -msgid "Security Level" -msgstr "Встановлення р╕вня безпеки" +msgid "" +"[OPTIONS] [PROGRAM_NAME]\n" +"\n" +"OPTIONS:\n" +" --help - print this help message.\n" +" --report - program should be one of mandrake tools\n" +" --incident - program should be one of mandrake tools" +msgstr "" -#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1 +#: ../../standalone/harddrake2:1 #, fuzzy, c-format -msgid "Network" -msgstr "Мережа:" +msgid "Harddrake2 version %s" +msgstr "Визначення типу диску" -#: ../../install_steps_interactive.pm:1 -#, fuzzy, c-format -msgid "Network & Internet" -msgstr "╤нтерфейс мереж╕" +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Copying %s" +msgstr "" -#: ../../install_steps_interactive.pm:1 +#: ../../standalone/draksplash:1 #, fuzzy, c-format -msgid "Graphical interface" -msgstr "Стартувати X автоматично" +msgid "Choose color" +msgstr "Вибер╕ть тип мон╕тору" -#: ../../install_steps_interactive.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Hardware" -msgstr "" +msgid "Dominican Republic" +msgstr "Дом╕н╕канська республ╕ка" -#: ../../install_steps_interactive.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "TV card" -msgstr "Телев╕з╕йна плата" +msgid "Swaziland" +msgstr "Сваз╕ленд" -#: ../../install_steps_interactive.pm:1 +#: ../../standalone/drakperm:1 #, c-format -msgid "No sound card detected. Try \"harddrake\" after installation" +msgid "Set-UID" msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Run \"sndconfig\" after installation to configure your sound card" -msgstr "" +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Please check if you are using CDRW media" +msgstr "Клацн╕ть, будь-ласка, на п╕дрозд╕л╕" -#: ../../install_steps_interactive.pm:1 +#: ../../help.pm:1 #, fuzzy, c-format -msgid "Do you have an ISA sound card?" -msgstr "Чи ви ма╓те ╕нш╕?" +msgid "" +"Choose the hard drive you want to erase in order to install your new\n" +"Mandrake Linux partition. Be careful, all data present on this partition\n" +"will be lost and will not be recoverable!" +msgstr "" +"Вибер╕ть жорсткий диск, який ви хочете переформатувати щоб встановити\n" +"новий п╕дрозд╕л для Мандрейк Л╕накса. Будьте уважн╕, оск╕льки вс╕ дан╕\n" +"будуть знищен╕, ╕ в╕дновити ╖х буде неможливо!" -#: ../../install_steps_interactive.pm:1 +#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format -msgid "Sound card" -msgstr "Звукова плата" +msgid " on parallel port \\#%s" +msgstr "" -#: ../../install_steps_interactive.pm:1 +# NOTE: this message will be displayed by grub at boot time; that is +# using the BIOS font; that means cp437 charset on 99.99% of PC computers +# out there. It is then suggested that for non latin languages an ascii +# transliteration be used; or maybe the english text be used; as it is best +# +# The lines must fit on screen, aka length < 80 +# and only one line per string for the GRUB messages +# +#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) +#. -PO: and keep them smaller than 79 chars long +#: ../../bootloader.pm:1 #, c-format -msgid "Remote CUPS server" -msgstr "В╕ддалений сервер CUPS" +msgid "Use the %c and %c keys for selecting which entry is highlighted." +msgstr "Dlja vyboru pidsvichenogo punktu korystujtesja klavishamy %c ta %c." -#: ../../install_steps_interactive.pm:1 +#: ../../mouse.pm:1 #, c-format -msgid "No printer" -msgstr "Нема╓ принтера" +msgid "Generic 2 Button Mouse" +msgstr "Звичайна 2х кнопочна мишка" -#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1 -#: ../../printer/printerdrake.pm:1 +#: ../../lvm.pm:1 #, c-format -msgid "Printer" -msgstr "Принтер" +msgid "Remove the logical volumes first\n" +msgstr "Спочатку з╕тр╕ть лог╕чний том\n" -#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1 +# NOTE: this message will be displayed by grub at boot time; that is +# using the BIOS font; that means cp437 charset on 99.99% of PC computers +# out there. It is then suggested that for non latin languages an ascii +# transliteration be used; or maybe the english text be used; as it is best +# +# The lines must fit on screen, aka length < 80 +# and only one line per string for the GRUB messages +# +#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) +#. -PO: and keep them smaller than 79 chars long +#: ../../bootloader.pm:1 #, c-format -msgid "Mouse" -msgstr "Миша" +msgid "The highlighted entry will be booted automatically in %d seconds." +msgstr "Pidsvichena systema zavantazhyt'sja avtomatichno cherez %d sekund." -#: ../../install_steps_interactive.pm:1 +#: ../../standalone/drakboot:1 #, c-format -msgid "Timezone" -msgstr "Часовий пояс" +msgid "" +"Can't write /etc/sysconfig/bootsplash\n" +"File not found." +msgstr "" -#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1 +#: ../../standalone/drakconnect:1 #, c-format -msgid "Keyboard" -msgstr "Клав╕атура" +msgid "Internet access" +msgstr "Доступ до ╕нтернету" -#: ../../install_steps_interactive.pm:1 ../../steps.pm:1 +#: ../../standalone/draksplash:1 #, c-format -msgid "Summary" -msgstr "Загалом" +msgid "" +"y coordinate of text box\n" +"in number of characters" +msgstr "" -#: ../../install_steps_interactive.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "NTP Server" -msgstr "Сервер NTP" +msgid "" +"To get a list of the options available for the current printer click on the " +"\"Print option list\" button." +msgstr "" -#: ../../install_steps_interactive.pm:1 +#: ../../standalone/drakgw:1 #, c-format -msgid "Automatic time synchronization (using NTP)" -msgstr "Автоматична синхрон╕зац╕я часу (╕з застосуванням NTP)" +msgid "Enabling servers..." +msgstr "Вмикаю сервери..." -#: ../../install_steps_interactive.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Hardware clock set to GMT" -msgstr "Годинник встановлено в GMT (час по ╫р╕нв╕чу)?" +msgid "Printing test page(s)..." +msgstr "Друкую тестову стор╕нку(стор╕нки)..." + +#: ../../fsedit.pm:1 +#, c-format +msgid "There is already a partition with mount point %s\n" +msgstr "Вже ╓ п╕дрозд╕л з точкою монтування %s\n" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"At this point, you need to decide where you want to install the Mandrake\n" +"Linux operating system on your hard drive. If your hard drive is empty or\n" +"if an existing operating system is using all the available space you will\n" +"have to partition the drive. Basically, partitioning a hard drive consists\n" +"of logically dividing it to create the space needed to install your new\n" +"Mandrake Linux system.\n" +"\n" +"Because the process of partitioning a hard drive is usually irreversible\n" +"and can lead to lost data if there is an existing operating system already\n" +"installed on the drive, partitioning can be intimidating and stressful if\n" +"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n" +"simplifies this process. Before continuing with this step, read through the\n" +"rest of this section and above all, take your time.\n" +"\n" +"Depending on your hard drive configuration, several options are available:\n" +"\n" +" * \"%s\": this option will perform an automatic partitioning of your blank\n" +"drive(s). If you use this option there will be no further prompts.\n" +"\n" +" * \"%s\": the wizard has detected one or more existing Linux partitions on\n" +"your hard drive. If you want to use them, choose this option. You will then\n" +"be asked to choose the mount points associated with each of the partitions.\n" +"The legacy mount points are selected by default, and for the most part it's\n" +"a good idea to keep them.\n" +"\n" +" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n" +"all the space available on it, you will have to create free space for\n" +"Linux. To do so, you can delete your Microsoft Windows partition and data\n" +"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n" +"partition. Resizing can be performed without the loss of any data, provided\n" +"you have previously defragmented the Windows partition and that it uses the\n" +"FAT format. Backing up your data is strongly recommended.. Using this\n" +"option is recommended if you want to use both Mandrake Linux and Microsoft\n" +"Windows on the same computer.\n" +"\n" +" Before choosing this option, please understand that after this\n" +"procedure, the size of your Microsoft Windows partition will be smaller\n" +"then when you started. You will have less free space under Microsoft\n" +"Windows to store your data or to install new software.\n" +"\n" +" * \"%s\": if you want to delete all data and all partitions present on\n" +"your hard drive and replace them with your new Mandrake Linux system,\n" +"choose this option. Be careful, because you will not be able to undo your\n" +"choice after you confirm.\n" +"\n" +" !! If you choose this option, all data on your disk will be deleted. !!\n" +"\n" +" * \"%s\": this will simply erase everything on the drive and begin fresh,\n" +"partitioning everything from scratch. All data on your disk will be lost.\n" +"\n" +" !! If you choose this option, all data on your disk will be lost. !!\n" +"\n" +" * \"%s\": choose this option if you want to manually partition your hard\n" +"drive. Be careful -- it is a powerful but dangerous choice and you can very\n" +"easily lose all your data. That's why this option is really only\n" +"recommended if you have done something like this before and have some\n" +"experience. For more instructions on how to use the DiskDrake utility,\n" +"refer to the ``Managing Your Partitions '' section in the ``Starter\n" +"Guide''." +msgstr "" +"Тепер ви ма╓те вибрати де саме ви б хот╕ли встановити свою систему\n" +"Мандрейк Л╕накс на жорсткому диску. Якщо диск пустий, або якщо в╕н\n" +"повн╕стю зайнятий ╕ншою операц╕йною системою, Вам потр╕бно буде\n" +"перерозпод╕лити диск. Фактично, перерозпод╕л жорсткого диску означа╓,\n" +"що диск буде розд╕лено на лог╕чн╕ п╕дрозд╕ли, для того, щоб створити\n" +"прост╕р для установки Мандрейк Л╕накса.\n" +"\n" +"Через те, що насл╕дки в╕д перерозпод╕лу диску звичайно незворотн╕, ця\n" +"операц╕я може бути хвилюючою для недосв╕дченого користувача.\n" +"\n" +"Якщо Ви користу╓тесь програмою установки в експертному режим╕, Ви\n" +"вв╕йдете в зас╕б для розбивки диск╕в на п╕дрозд╕ли Мандрейк Л╕накса:\n" +"DiskDrake. В╕д нада╓ можлив╕сть точного вибору розм╕р╕в\n" +"п╕дрозд╕л╕в. Подив╕ться розд╕л DiskDrake в п╕дручнику. Ви можете також\n" +"скористуватись пом╕чниками для р╕зних етап╕в установки, якщо клацнете\n" +"кнопку Пом╕чник.\n" +"\n" +"Цей пом╕чник спрощу╓ процес. Перш, н╕ж починати перерозпод╕л диску,\n" +"проконсультуйтесь з пос╕бником користувача.\n" +"\n" +"Якщо п╕дрозд╕ли вже було визначено (в╕д попередньо╖ установки або за\n" +"допомогою ╕ншо╖ програми розпод╕лу диск╕в), Вам потр╕бно буде вибрати\n" +"ц╕ п╕дрозд╕ли для увстановлення операц╕йно╖ системи Л╕накс на цих\n" +"п╕дрозд╕лах.\n" +"\n" +"Якщо так╕ п╕дрозд╕ли ще не були визначен╕, Вам потр╕бно буде ╖х\n" +"створити. Для цього ви можете скористуватися пом╕чником, який Ви\n" +"бачите вгор╕. В залежност╕ в╕д конф╕╜угац╕╖ Вашого жорсткого диску, Ви\n" +"можете мати к╕лька р╕зних вар╕ант╕в конф╕╜урац╕╖.\n" +"\n" +"* Користуватися ╕снуючими п╕дрозд╕лами: пом╕чник виявив один або\n" +"б╕льше п╕дрозд╕л╕в Л╕накса на Вашому жорсткому диску. Якщо ви хочете\n" +"зберегти ц╕ п╕дрозд╕ли, вибер╕ть цей пункт.\n" +"\n" +"\n" +"* Стерти весь диск: якщо ви хочете стерти вс╕ дан╕ на вс╕х п╕дрозд╕лах\n" +"Вашого жорсткого диску ╕ зам╕нити ╖х новою системою Мандрейк Л╕накс,\n" +"можете вибрати цю опц╕ю. Будьте уважн╕, бо вибравши цей\n" +"режим, ви вже не зможете повернутись назад.\n" +"\n" +"* Скористуватись в╕льним простором на п╕дрозд╕л╕ операц╕йно╖ системи\n" +"Windows: якщо на комп'ютер╕ встановлена операц╕йна система Microsoft\n" +"Windows ╕ вона займа╓ весь прост╕р на Вашому жорсткому диску, Ви\n" +"повинн╕ створити в╕льний прост╕р на диску для Л╕накса. Це можна\n" +"зробити, стерши повн╕стю всю систему Windows (див. \"Стерти весь диск\"\n" +"або режим установки \"Експерт\") або зм╕нивши розм╕р п╕дрозд╕лу, який\n" +"зайнятий Windows. Зм╕на розм╕ру п╕дрозд╕лу може бути зроблена без\n" +"втрати даних. Цей спос╕б установки рекоменду╓ться, якщо ви хочете мати\n" +"обидв╕ системи, ╕ Microsoft Windows, ╕ Мандрейк Л╕накс встановлен╕ на\n" +"сво╓му комп'ютер╕.\n" +"\n" +"Перш, н╕ж вибирати цей режим, зрозум╕йте, що у цьому випадку розм╕р\n" +"п╕дрозд╕лу для Microsoft Windows буде меншим, н╕ж зараз. Це означа╓,\n" +"що ви будете мати менше в╕льного простору при робот╕ в Microsoft\n" +"Windows для запису Ваших даних та програм.\n" +"\n" +"* Стерти Windows: це просто з╕тре повн╕стю весь диск ╕ почне св╕жий\n" +"под╕л на п╕дрозд╕ли. Вс╕ дан╕ на диску буде втрачено.\n" +"\n" +"!! Якщо Ви виберете цей пункт, вс╕ дан╕ на диску будуть втрачен╕. !!\n" +"\n" +"* Експертний режим: якщо ви хочете вручну перерозпод╕лити прост╕р на\n" +"Вашому жорсткому диску, ви можете вибрати цей режим. Однак будьте\n" +"обережними перш, н╕ж вибирати цей режим. Це -- потужний, але дуже\n" +"небезпечний режим. Ви можете втратити вс╕ дан╕ дуже просто. Отже, не\n" +"вибирайте цей режим, якщо добре не розум╕╓те, що саме ви робите." -#: ../../install_steps_interactive.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Which is your timezone?" -msgstr "В як╕й часов╕й смуз╕ Ви знаходитесь?" - -#: ../../install_steps_interactive.pm:1 -#, fuzzy, c-format -msgid "Would you like to try again?" -msgstr "Чи треба Вам настро╖ти друк?" +msgid "Ukraine" +msgstr "Укра╖на" -#: ../../install_steps_interactive.pm:1 +#: ../../standalone/drakbug:1 #, fuzzy, c-format -msgid "Unable to contact mirror %s" -msgstr "Неможливо виконати fork: %s" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Contacting the mirror to get the list of available packages..." -msgstr "Зв'язуюсь з сервером щоб прочитати список наявних пакет╕в" +msgid "Application:" +msgstr "Автентикац╕я" -#: ../../install_steps_interactive.pm:1 +#: ../../network/isdn.pm:1 #, c-format -msgid "Choose a mirror from which to get the packages" -msgstr "Вибер╕ть сервер, з якого звантажити пакети" - -#: ../../install_steps_interactive.pm:1 -#, fuzzy, c-format -msgid "" -"Contacting Mandrake Linux web site to get the list of available mirrors..." -msgstr "Зв'язуюсь з сервером щоб прочитати список наявних пакет╕в" +msgid "External ISDN modem" +msgstr "Зовн╕шн╕й модем ISDN" -#: ../../install_steps_interactive.pm:1 +#: ../../security/help.pm:1 #, c-format -msgid "" -"You now have the opportunity to download updated packages. These packages\n" -"have been updated after the distribution was released. They may\n" -"contain security or bug fixes.\n" -"\n" -"To download these packages, you will need to have a working Internet \n" -"connection.\n" -"\n" -"Do you want to install the updates ?" +msgid "if set to yes, report check result by mail." msgstr "" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Please insert the Update Modules floppy in drive %s" -msgstr "Вставте дискету Поновлення Модул╕в в дисков╕д %s" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Please insert the Boot floppy used in drive %s" -msgstr "Вставте системну дискету, яка вживалася в дисковод╕ %s" - -#: ../../install_steps_interactive.pm:1 +#: ../../interactive/stdio.pm:1 #, c-format -msgid "Post-install configuration" -msgstr "Конф╕╜урац╕я п╕сля установки" +msgid "Your choice? (default %s) " +msgstr "Ваш виб╕р? (рекомендований %s) " -#: ../../install_steps_interactive.pm:1 +#: ../../harddrake/sound.pm:1 #, c-format -msgid "" -"Installing package %s\n" -"%d%%" +msgid "Trouble shooting" msgstr "" -"Встановлюю пакет %s\n" -"%d%%" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Preparing installation" -msgstr "П╕дготовка установки" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Cd-Rom labeled \"%s\"" -msgstr "Компакт-диск з етикеткою \"%s\"" +#: ../../any.pm:1 ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid " / Region" +msgstr "Рен╕он" -#: ../../install_steps_interactive.pm:1 +#: ../../harddrake/sound.pm:1 #, c-format msgid "" -"If you have all the CDs in the list below, click Ok.\n" -"If you have none of those CDs, click Cancel.\n" -"If only some CDs are missing, unselect them, then click Ok." +"The classic bug sound tester is to run the following commands:\n" +"\n" +"\n" +"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n" +"by default\n" +"\n" +"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n" +"currently uses\n" +"\n" +"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n" +"loaded or not\n" +"\n" +"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n" +"tell you if sound and alsa services're configured to be run on\n" +"initlevel 3\n" +"\n" +"- \"aumix -q\" will tell you if the sound volume is muted or not\n" +"\n" +"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n" msgstr "" -"Якщо Ви ма╓те вс╕ компакт-диски з поданих вище, натисн╕ть на \"Гаразд\".\n" -"Якщо Ви не ма╓те жодного з поданих вище, натисн╕ть на \"В╕дм╕нити\".\n" -"Якщо т╕льки деяких компакт-диск╕в не вистача╓, в╕дм╕н╕ть ╖х виб╕р, ╕\n" -"натисн╕ть \"Гаразд\" п╕сля цього.\" " - -#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1 -#, c-format -msgid "All" -msgstr "Все" -#: ../../install_steps_interactive.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Truly minimal install (especially no urpmi)" +msgid "" +"Test page(s) have been sent to the printer.\n" +"It may take some time before the printer starts.\n" +"Printing status:\n" +"%s\n" +"\n" msgstr "" +"Тестова стор╕нка передана програм╕ друку.\n" +"Перед тим, як принтер почне друкувати, можливо пройде \n" +"деякий час.\n" +"Статус друку:\n" +"%s\n" +"\n" -#: ../../install_steps_interactive.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "With basic documentation (recommended!)" +msgid "daily" msgstr "" -#: ../../install_steps_interactive.pm:1 +#: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "With X" -msgstr "Чекайте" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "" -"You haven't selected any group of packages.\n" -"Please choose the minimal installation you want:" -msgstr "" +msgid "and one unknown printer" +msgstr "Додати принтер" -#: ../../install_steps_interactive.pm:1 +#: ../../lang.pm:1 ../../standalone/drakxtv:1 #, fuzzy, c-format -msgid "Type of install" -msgstr "Вибер╕ть пакет для установки" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Selected size is larger than available space" -msgstr "Вибраний розм╕р б╕льший за наявний прост╕р" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Insert a floppy containing package selection" -msgstr "Вставте дискету, з записаним списком пакет╕в" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Loading from floppy" -msgstr "В╕дновлюю з дискети" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Package selection" -msgstr "Виб╕р пакет╕в" +msgid "Ireland" +msgstr "╤сландська" -#: ../../install_steps_interactive.pm:1 +#: ../../standalone/drakfloppy:1 #, c-format -msgid "Save on floppy" -msgstr "Записати на дискету" +msgid "kernel version" +msgstr "верс╕я ядра" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Load from floppy" -msgstr "В╕дновити з дискети" +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid " Restore Configuration " +msgstr "Конф╕гурац╕я мереж╕" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "" -"Please choose load or save package selection on floppy.\n" -"The format is the same as auto_install generated floppies." -msgstr "" -"Будь ласка, вибер╕ть запис/завантаження вибору пакет╕в на дискету.\n" -"Формат дистети такий-же, як ╕ дискети auto_install." +#: ../../Xconfig/test.pm:1 +#, fuzzy, c-format +msgid "Is this the correct setting?" +msgstr "Все в╕рно?" -#: ../../install_steps_interactive.pm:1 -#, c-format +#: ../../help.pm:1 +#, fuzzy, c-format msgid "" -"Your system does not have enough space left for installation or upgrade (%d " -"> %d)" +"You will now set up your Internet/network connection. If you wish to\n" +"connect your computer to the Internet or to a local network, click \"%s\".\n" +"Mandrake Linux will attempt to autodetect network devices and modems. If\n" +"this detection fails, uncheck the \"%s\" box. You may also choose not to\n" +"configure the network, or to do it later, in which case clicking the \"%s\"\n" +"button will take you to the next step.\n" +"\n" +"When configuring your network, the available connections options are:\n" +"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n" +"simple LAN connection (Ethernet).\n" +"\n" +"We will not detail each configuration option - just make sure that you have\n" +"all the parameters, such as IP address, default gateway, DNS servers, etc.\n" +"from your Internet Service Provider or system administrator.\n" +"\n" +"You can consult the ``Starter Guide'' chapter about Internet connections\n" +"for details about the configuration, or simply wait until your system is\n" +"installed and use the program described there to configure your connection." msgstr "" -"У Ваш╕й систем╕ не залишилось достатньо в╕льного м╕сця для установки\n" -"чи поновлення (%d > %d )" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Looking for available packages..." -msgstr "Шукаю наявн╕ пакети" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Finding packages to upgrade..." -msgstr "Шукаю пакети для поновлення" - -#: ../../install_steps_interactive.pm:1 -#, fuzzy, c-format -msgid "Looking at packages already installed..." -msgstr "Виб╕р цього пакету неможливо в╕дм╕нити. Його вже встановлено." +"Вибер╕ть коректну опц╕ю для з'╓днання, якщо Ви бажа╓те п╕дключити св╕й\n" +"комп'ютер до глобальних тенет чи локально╖ мереж╕. Перш, н╕ж вибирати\n" +"опц╕ю для з'╓днання, вмикн╕ть пристр╕й, щоб DrakX м╕г визначити\n" +"пристр╕й автоматично.\n" +"\n" +"Мандрейк Л╕накс пропону╓ конф╕╜урац╕ю з'╓днання з тенетами при\n" +"установц╕. Доступн╕ типи конф╕╜урац╕й: звичайний модем, модем ISDN,\n" +"з'╓днання ADSL, кабельний модем ╕, нарешт╕, звичайне з'╓днання\n" +"локально╖ мереж╕ (Ethernet).\n" +"\n" +"Тут ми не розгляда╓мо вс╕х подробиць кожного типу з'╓днання. Просто\n" +"пересв╕дч╕ться, що Ви ма╓те вс╕ необх╕дн╕ дан╕ в╕д провайдера послуг\n" +"тенет чи системного адм╕н╕стратора.\n" +"\n" +"Можете звернутися до пос╕бника за додатковою ╕нформац╕╓ю, чи просто\n" +"зачекайте, доки система встановиться, ╕ скористайтесь програмою для\n" +"встановлення конф╕╜урац╕╖ з'╓днання тенет.\n" +"\n" +"Якщо Ви не ма╓те н╕яко╖ мереж╕, н╕ з глобальними тенетеми, н╕ з\n" +"локальною мережею, натисн╕ть кнопку \"Заборонити мережу\".\n" +"\n" +"Якщо ж Ви хочете сконф╕╜урувати мережу п╕зн╕ше, п╕сля установки,\n" +"натисн╕ть на \"Зак╕нчено\"." -#: ../../install_steps_interactive.pm:1 +#: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "Looking for available packages and rebuilding rpm database..." -msgstr "Шукаю наявн╕ пакети" +msgid "Wizard Configuration" +msgstr "Конф╕╜урац╕я" -#: ../../install_steps_interactive.pm:1 +#: ../../modules/interactive.pm:1 #, c-format -msgid "Not enough swap space to fulfill installation, please add some" -msgstr "" -"Не вистача╓ своп-пам'ят╕ щоб зак╕нчити установку. Зб╕льш╕ть\n" -"╖╖. будь-ласка." +msgid "Autoprobe" +msgstr "Автотест" -#: ../../install_steps_interactive.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "" -"Failed to check filesystem %s. Do you want to repair the errors? (beware, " -"you can loose data)" +msgid "Backup system files..." msgstr "" -#: ../../install_steps_interactive.pm:1 +#: ../../install_any.pm:1 #, c-format -msgid "Check bad blocks?" -msgstr "Перев╕ряти зб╕йн╕ блоки?" +msgid "Can't use broadcast with no NIS domain" +msgstr "Не можу використовувати трансляц╕ю без NIS домену" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Choose the partitions you want to format" -msgstr "Вибер╕ть п╕дрозд╕ли, як╕ Ви хочете в╕дформатувати" +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Removing printer \"%s\"..." +msgstr "Стираю принтер \"%s\" ..." -#: ../../install_steps_interactive.pm:1 +#: ../../standalone/drakfloppy:1 #, c-format -msgid "You need to reboot for the partition table modifications to take place" -msgstr "" -"Для того, щоб таблиця п╕дрозд╕л╕в була актив╕зована, Вам треба\n" -"перевантажити систему" +msgid "drakfloppy" +msgstr "drakfloppy" -#: ../../install_steps_interactive.pm:1 +#: ../../standalone/drakpxe:1 #, c-format msgid "" -"No free space for 1MB bootstrap! Install will continue, but to boot your " -"system, you'll need to create the bootstrap partition in DiskDrake" +"Please indicate where the auto_install.cfg file is located.\n" +"\n" +"Leave it blank if you do not want to set up automatic installation mode.\n" +"\n" msgstr "" -"Не вистача╓ в╕льного м╕сця для 1МБ завантажувального блоку! Установка\n" -"буде продовжуватись, але для завантаження сво╓╖ системи Вам потр╕бно\n" -"буде створити DiskDrake'ом завантажувальний п╕дрозд╕л " - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Choose the mount points" -msgstr "Вибер╕ть точки монтування" - -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "Scanning partitions to find mount points" -msgstr "Сканування п╕дрозд╕л╕в для знаходження точок монтування" -#: ../../install_steps_interactive.pm:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "No partition available" -msgstr "нема╓ п╕дрозд╕л╕в" +msgid "information level that can be obtained through the cpuid instruction" +msgstr "" -#: ../../install_steps_interactive.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Configuring IDE" -msgstr "Конф╕гурац╕я IDE" +msgid "Peru" +msgstr "Перу" -#: ../../install_steps_interactive.pm:1 -#, c-format -msgid "IDE" -msgstr "IDE" +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid " on device: %s" +msgstr "Спец╕альний пристр╕й миш╕: %s\n" -#: ../../install_steps_interactive.pm:1 +#: ../../install_interactive.pm:1 #, c-format -msgid "Configuring PCMCIA cards..." -msgstr "Конф╕гурую картки PCMCIA..." +msgid "Remove Windows(TM)" +msgstr "Стерти Windows(TM)" -#: ../../install_steps_interactive.pm:1 +#: ../../services.pm:1 #, c-format -msgid "PCMCIA" -msgstr "PCMCIA" +msgid "Starts the X Font Server (this is mandatory for XFree to run)." +msgstr "" +"Старту╓ та зупиня╓ сервер шрифт╕в для X (обов'язкове для роботи\n" +"сервера XFree)." -#: ../../install_steps_interactive.pm:1 +#: ../../standalone/drakTermServ:1 #, c-format -msgid "Button 3 Emulation" -msgstr "Емуляц╕я 3 клав╕ш" +msgid "" +"Most of these values were extracted\n" +"from your running system.\n" +"You can modify as needed." +msgstr "" -#: ../../install_steps_interactive.pm:1 +#: ../../standalone/drakfont:1 #, c-format -msgid "Button 2 Emulation" -msgstr "Емуляц╕я 2 клав╕ш" +msgid "Select the font file or directory and click on 'Add'" +msgstr "" -#: ../../install_steps_interactive.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Buttons emulation" -msgstr "Емуляц╕я клав╕ш" +msgid "Madagascar" +msgstr "Мадагаскар" -#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1 +#: ../../standalone/drakbug:1 #, c-format -msgid "Please choose which serial port your mouse is connected to." -msgstr "Вибер╕ть до якого посл╕довного порту при╓днано мишу?" +msgid "Urpmi" +msgstr "" -#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Mouse Port" -msgstr "Порт миш╕" +msgid "Cron not available yet as non-root" +msgstr "" -#: ../../install_steps_interactive.pm:1 +#: ../../install_steps_interactive.pm:1 ../../services.pm:1 +#: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "Please choose your type of mouse." -msgstr "Який тип миш╕ ви ма╓те?" +msgid "System" +msgstr "Системний режим" -#: ../../install_steps_interactive.pm:1 +#: ../../any.pm:1 ../../help.pm:1 #, fuzzy, c-format -msgid "Encryption key for %s" -msgstr "Парол╕ р╕зн╕" +msgid "Do you want to use this feature?" +msgstr "Чи Ви хочете використовувати aboot?" -#: ../../install_steps_interactive.pm:1 -#, fuzzy, c-format -msgid "Upgrade %s" -msgstr "Поновлення" +#: ../../keyboard.pm:1 +#, c-format +msgid "Arabic" +msgstr "" -#: ../../install_steps_interactive.pm:1 +#: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "Is this an install or an upgrade?" -msgstr "Це установка чи поновлення?" +msgid "" +"\n" +"- Options:\n" +msgstr "Параметри" -#: ../../install_steps_interactive.pm:1 +#: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "Install/Upgrade" -msgstr "Встановити/Поновити" +msgid "Password required" +msgstr "Пароль" -#: ../../install_steps_interactive.pm:1 +#: ../../common.pm:1 #, c-format -msgid "Here is the full list of keyboards available" -msgstr "Тут наведено повний список наявних клав╕атур" +msgid "%d minutes" +msgstr "%d хвилин" -#: ../../install_steps_interactive.pm:1 -#, fuzzy, c-format -msgid "Please choose your keyboard layout." -msgstr "Яка у Вас розкладка клав╕атури?" +#: ../../Xconfig/resolution_and_depth.pm:1 +#, c-format +msgid "Graphics card: %s" +msgstr "В╕део плата: %s" -#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1 -#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1 -#: ../../standalone/drakperm:1 ../../standalone/draksplash:1 -#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 -#: ../../standalone/scannerdrake:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Quit" -msgstr "Вих╕д" +msgid "WebDAV transfer failed!" +msgstr "" -#: ../../install_steps_interactive.pm:1 +#: ../../Xconfig/card.pm:1 #, c-format -msgid "License agreement" -msgstr "Л╕ценз╕йна умова" +msgid "XFree configuration" +msgstr "Конф╕╜урац╕я XFree" -#: ../../install_steps_interactive.pm:1 +#: ../../diskdrake/hd_gtk.pm:1 #, c-format -msgid "An error occurred" -msgstr "Сталася помилка" +msgid "Choose action" +msgstr "Вибер╕ть д╕ю" -#: ../../install_steps_newt.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "" -" / between elements | selects | next screen " -msgstr "" -" / м╕ж елементами | виб╕р | наступний екран" +msgid "French Polynesia" +msgstr "Французька Пол╕нез╕я" -#: ../../install_steps_newt.pm:1 +#: ../../help.pm:1 #, c-format -msgid "Mandrake Linux Installation %s" -msgstr "Установка Mandrake Linux %s" +msgid "" +"Usually, DrakX has no problems detecting the number of buttons on your\n" +"mouse. If it does, it assumes you have a two-button mouse and will\n" +"configure it for third-button emulation. The third-button mouse button of a\n" +"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n" +"right mouse buttons. DrakX will automatically know whether your mouse uses\n" +"a PS/2, serial or USB interface.\n" +"\n" +"If for some reason you wish to specify a different type of mouse, select it\n" +"from the list provided.\n" +"\n" +"If you choose a mouse other than the default, a test screen will be\n" +"displayed. Use the buttons and wheel to verify that the settings are\n" +"correct and that the mouse is working correctly. If the mouse is not\n" +"working well, press the space bar or [Return] key to cancel the test and to\n" +"go back to the list of choices.\n" +"\n" +"Wheel mice are occasionally not detected automatically, so you will need to\n" +"select your mouse from a list. Be sure to select the one corresponding to\n" +"the port that your mouse is attached to. After selecting a mouse and\n" +"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n" +"the mouse wheel to ensure that it is activated correctly. Once you see the\n" +"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n" +"buttons and check that the mouse pointer moves on-screen as you move your\n" +"mouse." +msgstr "" -#: ../../install_steps.pm:1 +#: ../../services.pm:1 #, c-format -msgid "No floppy drive available" -msgstr "Нема╓ привода дискети" +msgid "Support the OKI 4w and compatible winprinters." +msgstr "П╕дтримка для OKI 4w ╕ под╕бних win принтер╕в." -#: ../../install_steps.pm:1 +#: ../../services.pm:1 #, c-format -msgid "Welcome to %s" -msgstr "Ласкаво просимо до %s" +msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" +msgstr "Запуск звуково╖ системи ALSA (Advanced Linux Sound Architecture)" -#: ../../install_steps.pm:1 +#. -PO: the first %s is the card type (scsi, network, sound,...) +#. -PO: the second is the vendor+model name +#: ../../modules/interactive.pm:1 #, c-format +msgid "Installing driver for %s card %s" +msgstr "Встановлюю драйвер для %s плати %s" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format msgid "" -"Some important packages didn't get installed properly.\n" -"Either your cdrom drive or your cdrom is defective.\n" -"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm" -"\"\n" +"You have transferred your former default printer (\"%s\"), Should it be also " +"the default printer under the new printing system %s?" msgstr "" -"Деяк╕ важлив╕ пакети не змогли в╕рно встановитися. Або Ваш\n" -"компакт-диск або прив╕д дефектн╕. Перев╕рте компакт диск на\n" -"встановленому комп'ютер╕ командою \"rpm -qpl \" \"Mandrake/RPMS/*.rpm\" \n" +"Ви перенесли Ваш колишн╕й основний принтер (\"%s\"). Зробити так, щоб\n" +"цей принтер залишався основним ╕ в нов╕й систем╕ друку %s?" -#: ../../install_steps.pm:1 +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "Enable Server" +msgstr "База даних" + +#: ../../keyboard.pm:1 #, c-format -msgid "Duplicate mount point %s" -msgstr "Подв╕йн╕ точки монтування %s" +msgid "Ukrainian" +msgstr "Укра╖нська" -#: ../../install_steps.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format msgid "" -"An error occurred, but I don't know how to handle it nicely.\n" -"Continue at your own risk." +"The network access was not running and could not be started. Please check " +"your configuration and your hardware. Then try to configure your remote " +"printer again." msgstr "" -"Сталася помилка, але я не знаю, як з нею поводитися.\n" -"Продовжуйте на св╕й власний ризик." -#: ../../interactive.pm:1 ../../harddrake/sound.pm:1 -#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1 -#: ../../standalone/service_harddrake:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "Please wait" -msgstr "Зачекайте, будь-ласка" +msgid "Please insert the Boot floppy used in drive %s" +msgstr "Вставте системну дискету, яка вживалася в дисковод╕ %s" -#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1 -#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1 -#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1 -#: ../../standalone/drakbackup:1 ../../standalone/draksec:1 -#, c-format -msgid "Ok" -msgstr "Гаразд" +#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Local network(s)" +msgstr "не знайдена плата мереж╕" -#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1 -#: ../../interactive/newt.pm:1 -#, c-format -msgid "Finish" -msgstr "Зак╕нчити" +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "Remove Windows" +msgstr "Стерти Windows(TM)" -#: ../../interactive.pm:1 ../../standalone/draksec:1 +#: ../../standalone/scannerdrake:1 #, c-format -msgid "Basic" +msgid "" +"Your %s has been configured.\n" +"You may now scan documents using \"XSane\" from Multimedia/Graphics in the " +"applications menu." msgstr "" -#: ../../interactive.pm:1 +#: ../../harddrake/data.pm:1 #, c-format -msgid "Advanced" -msgstr "Досв╕дчений" +msgid "Firewire controllers" +msgstr "" -#: ../../interactive.pm:1 ../../interactive/gtk.pm:1 +#: ../../help.pm:1 #, fuzzy, c-format -msgid "Remove" -msgstr "Видалити принтер" - -#: ../../interactive.pm:1 ../../interactive/gtk.pm:1 -#, c-format -msgid "Modify" -msgstr "Зм╕нити" - -#: ../../interactive.pm:1 ../../interactive/gtk.pm:1 -#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 -#, c-format -msgid "Add" -msgstr "Додати" +msgid "" +"After you have configured the general bootloader parameters, the list of\n" +"boot options that will be available at boot time will be displayed.\n" +"\n" +"If there are other operating systems installed on your machine they will\n" +"automatically be added to the boot menu. You can fine-tune the existing\n" +"options by clicking \"%s\" to create a new entry; selecting an entry and\n" +"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n" +"changes.\n" +"\n" +"You may also not want to give access to these other operating systems to\n" +"anyone who goes to the console and reboots the machine. You can delete the\n" +"corresponding entries for the operating systems to remove them from the\n" +"bootloader menu, but you will need a boot disk in order to boot those other\n" +"operating systems!" +msgstr "" +"LILO (the LInux LOader - завантажувач Л╕накса) та Grub -- це\n" +"завантажувач╕ системи: вони можуть завантажити або GNU/Л╕накс або\n" +"будь-яку ╕ншу операц╕йну систему на Вашому комп'ютер╕. За нормальних\n" +"умов ц╕ операц╕йн╕ системи в╕рно визначаються та встановлюються. Якщо\n" +"це не так, ви можете додати потр╕бний пункт самост╕йно. Уважно\n" +"вибер╕ть потр╕бн╕ параметри.\n" +"\n" +"\n" +"Ви, можливо, також захочете закрити доступ до цих операц╕йних систем\n" +"╕ншим, в цьому випадку ви можете стерти в╕дпов╕дн╕ пункти в файл╕\n" +"конф╕╜урац╕╖. Але в цьому випадку Вам потр╕бна буде спец╕альна\n" +"дискета, щоб завантажити ц╕ системи!" -#: ../../interactive.pm:1 +#: ../../standalone/drakboot:1 #, c-format -msgid "Choose a file" -msgstr "Вибер╕ть файл" +msgid "System mode" +msgstr "Системний режим" -#: ../../keyboard.pm:1 -#, c-format +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format msgid "" -"Here you can choose the key or key combination that will \n" -"allow switching between the different keyboard layouts\n" -"(eg: latin and non latin)" +"To print on a NetWare printer, you need to provide the NetWare print server " +"name (Note! it may be different from its TCP/IP hostname!) as well as the " +"print queue name for the printer you wish to access and any applicable user " +"name and password." msgstr "" +"Для того, щоб друкувати на NetWare принт-сервер╕, Ви повинн╕\n" +"вказати назву принт-сервера (Зауважте! вона може в╕др╕знятися в╕д\n" +"TCP/IP ╕мен╕ хоста!) разом з назвою принтера, яким Ви хочете\n" +"користуватися та в╕дпов╕дним ╕менем користувача з паролем." -#: ../../keyboard.pm:1 +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "Netmask:" +msgstr "Маска мереж╕" + +#: ../../any.pm:1 #, c-format -msgid "Right \"Windows\" key" -msgstr "" +msgid "Append" +msgstr "При╓днати" -#: ../../keyboard.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Left \"Windows\" key" +msgid "Refresh printer list (to display all available remote CUPS printers)" msgstr "" -#: ../../keyboard.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "\"Menu\" key" +msgid "" +"When this option is turned on, on every startup of CUPS it is automatically " +"made sure that\n" +"\n" +"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n" +"\n" +"- if /etc/cups/cupsd.conf is missing, it will be created\n" +"\n" +"- when printer information is broadcasted, it does not contain \"localhost\" " +"as the server name.\n" +"\n" +"If some of these measures lead to problems for you, turn this option off, " +"but then you have to take care of these points." msgstr "" -#: ../../keyboard.pm:1 +#: ../../harddrake/sound.pm:1 #, c-format -msgid "Alt and Shift keys simultaneously" +msgid "" +"OSS (Open Sound System) was the first sound API. It's an OS independant " +"sound API (it's available on most unices systems) but it's a very basic and " +"limited API.\n" +"What's more, OSS drivers all reinvent the wheel.\n" +"\n" +"ALSA (Advanced Linux Sound Architecture) is a modularized architecture " +"which\n" +"supports quite a large range of ISA, USB and PCI cards.\n" +"\n" +"It also provides a much higher API than OSS.\n" +"\n" +"To use alsa, one can either use:\n" +"- the old compatibility OSS api\n" +"- the new ALSA api that provides many enhanced features but requires using " +"the ALSA library.\n" msgstr "" -#: ../../keyboard.pm:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "Ctrl and Alt keys simultaneously" +msgid "" +"The auto install can be fully automated if wanted,\n" +"in that case it will take over the hard drive!!\n" +"(this is meant for installing on another box).\n" +"\n" +"You may prefer to replay the installation.\n" msgstr "" +"Якщо потр╕бно, автоматизована установка може бути повн╕стю\n" +"автоматично. В цьому випадку установка буде мати повний контроль над\n" +"вашим диском!! (Такий тип установки в основному п╕дходить для\n" +"установки на ╕нш╕й систем╕)\n" +"\n" +"Можливо ви захочете повторити установку.\n" -#: ../../keyboard.pm:1 +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Network printer \"%s\", port %s" +msgstr "Принтер в мереж╕ (сокет)" + +#: ../../standalone/drakgw:1 #, c-format -msgid "CapsLock key" +msgid "" +"Please choose what network adapter will be connected to your Local Area " +"Network." msgstr "" +"Вибер╕ть, будь-ласка, який адаптер мереж╕ буде п╕дключено до локально╖\n" +"мереж╕." -#: ../../keyboard.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Control and Shift keys simultaneously" +msgid "OK to restore the other files." msgstr "" -#: ../../keyboard.pm:1 +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Please choose your keyboard layout." +msgstr "Яка у Вас розкладка клав╕атури?" + +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Both Shift keys simultaneously" -msgstr "" +msgid "Printer Device URI" +msgstr "URI пристрою принтера" -#: ../../keyboard.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Right Alt key" +msgid "Not erasable media!" msgstr "" -#: ../../keyboard.pm:1 +#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format -msgid "Yugoslavian (latin)" -msgstr "Югославська (латинська)" +msgid "Terminal-based" +msgstr "Через терм╕нал" -#: ../../keyboard.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Vietnamese \"numeric row\" QWERTY" -msgstr "В'╓тнамська \"цифровий ряд\" QWERTY" +msgid "Installing a printing system in the %s security level" +msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "US keyboard (international)" -msgstr "Клав╕атура США (м╕жнародна)" +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "The user name is too long" +msgstr "Це ╕м'я вже зайняте" -#: ../../keyboard.pm:1 +#: ../../any.pm:1 #, c-format -msgid "US keyboard" -msgstr "Клав╕атура США" +msgid "Other OS (windows...)" +msgstr "╤нш╕ системи (windows...)" -#: ../../keyboard.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "UK keyboard" -msgstr "Британська клав╕атура" +msgid "WebDAV remote site already in sync!" +msgstr "" -#: ../../keyboard.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Ukrainian" -msgstr "Укра╖нська" +msgid "Reading printer database..." +msgstr "Читаю дан╕ принтер╕в ..." -#: ../../keyboard.pm:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "Turkish (modern \"Q\" model)" -msgstr "Турецька (традиц╕йна \"Q\" модель)" +msgid "Generate auto install floppy" +msgstr "Створення автоустановочно╖ дискети" -#: ../../keyboard.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Turkish (traditional \"F\" model)" -msgstr "Турецька (традиц╕йна \"F\" модель)" +msgid "" +"\t\t user name: %s\n" +"\t\t on path: %s \n" +msgstr "" -#: ../../keyboard.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Tajik keyboard" -msgstr "Таджицька клав╕атура" +msgid "Somalia" +msgstr "Сомал╕" -#: ../../keyboard.pm:1 +#: ../../harddrake/sound.pm:1 #, c-format -msgid "Thai keyboard" -msgstr "Тайська клав╕атура" +msgid "No open source driver" +msgstr "" -#: ../../keyboard.pm:1 +#: ../../security/level.pm:1 #, fuzzy, c-format -msgid "Tamil (Typewriter-layout)" -msgstr "В╕рменська (друкарська машинка)" - -#: ../../keyboard.pm:1 -#, c-format -msgid "Tamil (ISCII-layout)" +msgid "" +"This is similar to the previous level, but the system is entirely closed and " +"security features are at their maximum." msgstr "" +"Ми вмика╓мо 4 р╕вень безпеки, але тепер система ╓ повн╕стю закритою.\n" +"Вс╕ режими безпеки тепер на найвищому р╕вн╕." -#: ../../keyboard.pm:1 -#, c-format -msgid "Serbian (cyrillic)" -msgstr "Сербська (кирилиця)" - -#: ../../keyboard.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Slovakian (QWERTY)" -msgstr "Словацька (QWERTY)" +msgid "Nicaragua" +msgstr "Н╕карагуа" -#: ../../keyboard.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Slovakian (QWERTZ)" -msgstr "Словацька (QWERTZ)" +msgid "New Caledonia" +msgstr "Нова Каледон╕я" -#: ../../keyboard.pm:1 +#: ../../network/isdn.pm:1 #, c-format -msgid "Slovenian" -msgstr "Словенська" +msgid "European protocol (EDSS1)" +msgstr "╢вропейський протоколь (EDSS1)" -#: ../../keyboard.pm:1 +#: ../../any.pm:1 #, c-format -msgid "Swedish" -msgstr "Шведська" +msgid "Video mode" +msgstr "В╕део режим" -#: ../../keyboard.pm:1 -#, c-format -msgid "Russian (Yawerty)" -msgstr "Рос╕йська (ЯВЕРТИ)" +#: ../../standalone/logdrake:1 +#, fuzzy, c-format +msgid "Please enter your email address below " +msgstr "Будь-ласка, спробуйте ще раз" -#: ../../keyboard.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Russian" -msgstr "Рос╕йська" +msgid "Oman" +msgstr "Омен" -#: ../../keyboard.pm:1 -#, c-format -msgid "Romanian (qwerty)" -msgstr "Румунська (qwerty)" +#: ../../standalone/net_monitor:1 +#, fuzzy, c-format +msgid "Network Monitoring" +msgstr "Конф╕гурац╕я мереж╕" -#: ../../keyboard.pm:1 +#: ../../diskdrake/hd_gtk.pm:1 #, c-format -msgid "Romanian (qwertz)" -msgstr "Румунська (qwertz)" +msgid "SunOS" +msgstr "SunOS" -#: ../../keyboard.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Canadian (Quebec)" -msgstr "Канадська (Квебек)" +msgid "New size in MB: " +msgstr "Новий розм╕р (Мб): " -#: ../../keyboard.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Portuguese" -msgstr "Португальська" +msgid "Partition table type: %s\n" +msgstr "Тип таблиц╕ п╕дрозд╕л╕в: %s\n" -#: ../../keyboard.pm:1 -#, c-format -msgid "Polish (qwertz layout)" -msgstr "Польська (розкладка qwertz)" +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Authentication Windows Domain" +msgstr "Автентикац╕я LDAP" #: ../../keyboard.pm:1 #, c-format -msgid "Polish (qwerty layout)" -msgstr "Польська (розкладка qwerty)" +msgid "US keyboard" +msgstr "Клав╕атура США" -#: ../../keyboard.pm:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "Norwegian" -msgstr "Норвезька" +msgid "Buttons emulation" +msgstr "Емуляц╕я клав╕ш" -#: ../../keyboard.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Dutch" -msgstr "Датська" +msgid ", network printer \"%s\", port %s" +msgstr "" -#: ../../keyboard.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Maltese (US)" +msgid "" +"\n" +"Drakbackup activities via tape:\n" +"\n" msgstr "" -#: ../../keyboard.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Maltese (UK)" +msgid "" +"\n" +" FTP connection problem: It was not possible to send your backup files by " +"FTP.\n" msgstr "" -#: ../../keyboard.pm:1 +#: ../../standalone/net_monitor:1 #, fuzzy, c-format -msgid "Mongolian (cyrillic)" -msgstr "Сербська (кирилиця)" +msgid "Sending Speed:" +msgstr "Записати в файл" -#: ../../keyboard.pm:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "Myanmar (Burmese)" +msgid "Halt bug" msgstr "" -#: ../../keyboard.pm:1 -#, c-format -msgid "Macedonian" -msgstr "Македонська" +#: ../../standalone/logdrake:1 +#, fuzzy, c-format +msgid "Mail alert configuration" +msgstr "Конф╕гурац╕я ╕нтернету" -#: ../../keyboard.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Malayalam" -msgstr "" +msgid "Tokelau" +msgstr "Токелау" #: ../../keyboard.pm:1 -#, c-format -msgid "Latvian" -msgstr "Латв╕йська" +#, fuzzy, c-format +msgid "Bosnian" +msgstr "Естонська" -#: ../../keyboard.pm:1 -#, c-format -msgid "Lithuanian \"phonetic\" QWERTY" -msgstr "Литовська \"фонетична\" QWERTY" +#: ../../standalone/drakbug:1 +#, fuzzy, c-format +msgid "Release: " +msgstr "Зачекайте, будь-ласка" -#: ../../keyboard.pm:1 +#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format -msgid "Lithuanian \"number row\" QWERTY" -msgstr "Литовська \"цифровий ряд\" QWERTY" +msgid "Connection speed" +msgstr "Швидк╕сть зв'язку" -#: ../../keyboard.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Lithuanian AZERTY (new)" -msgstr "Литовська AZERTY (нова)" +msgid "" +"Please enter your CD Writer device name\n" +" ex: 0,1,0" +msgstr "" -#: ../../keyboard.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Lithuanian AZERTY (old)" -msgstr "Литовська AZERTY (стара)" +msgid "Namibia" +msgstr "Нам╕б╕я" -#: ../../keyboard.pm:1 +#: ../../services.pm:1 #, fuzzy, c-format -msgid "Laotian" -msgstr "Латв╕йська" +msgid "Database Server" +msgstr "База даних" -#: ../../keyboard.pm:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "Latin American" -msgstr "Латино-американська" +msgid "special capacities of the driver (burning ability and or DVD support)" +msgstr "" -#: ../../keyboard.pm:1 +#: ../../raid.pm:1 #, c-format -msgid "Korean keyboard" -msgstr "Корейська клав╕атура" +msgid "Can't add a partition to _formatted_ RAID md%d" +msgstr "Не можу додати п╕дрозд╕л до _форматованого_ RAID md%d" -#: ../../keyboard.pm:1 +#: ../../Xconfig/card.pm:1 #, c-format -msgid "Japanese 106 keys" -msgstr "Японська 106 клав╕ш" +msgid "" +"Your card can have 3D hardware acceleration support but only with XFree %s,\n" +"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" +"Your card is supported by XFree %s which may have a better support in 2D." +msgstr "" +"Ця в╕деоплата ма╓ п╕дтримку апаратного прискорення трьохвим╕рно╖\n" +"граф╕ки, але т╕льки для XFree %s, В╤ДМ╤ТЬТЕ, ЩО ЦЕ ЕКСПЕРИМЕНТАЛЬНИЙ\n" +"РЕЖИМ, ЯКИЙ МОЖЕ ПРИВЕСТИ ДО ЗАВИСАННЯ ВАШОГО КОМП'ЮТЕРА. Ваша плата\n" +"п╕дтриму╓ться XFree %s, який ма╓ кращу п╕дтримку двовим╕рно╖ граф╕ки." + +#: ../../standalone/draksec:1 +#, fuzzy, c-format +msgid "Please wait, setting security options..." +msgstr "Зачекайте, ╕де п╕дготовка установки" -#: ../../keyboard.pm:1 +#: ../../harddrake/v4l.pm:1 #, c-format -msgid "Inuktitut" +msgid "Unknown|CPH05X (bt878) [many vendors]" msgstr "" -#: ../../keyboard.pm:1 +#: ../../standalone/drakboot:1 #, c-format -msgid "Italian" -msgstr "╤тал╕йська" +msgid "Launch the graphical environment when your system starts" +msgstr "Запускати в╕кно X-Window при завантаженн╕" -#: ../../keyboard.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Icelandic" -msgstr "╤сландська" +msgid "hourly" +msgstr "" -#: ../../keyboard.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Iranian" -msgstr "╤ранська" +msgid " Successfuly Restored on %s " +msgstr "" -#: ../../keyboard.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Israeli (Phonetic)" -msgstr "╤зра╖льська (фонетична)" +msgid "Making printer port available for CUPS..." +msgstr "" -#: ../../keyboard.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Israeli" -msgstr "╤зра╖льська" +msgid "Antigua and Barbuda" +msgstr "Антигуа та Барбуда" -#: ../../keyboard.pm:1 +#: ../../standalone/drakTermServ:1 #, c-format -msgid "Croatian" -msgstr "Хорватська" +msgid "" +"!!! Indicates the password in the system database is different than\n" +" the one in the Terminal Server database.\n" +"Delete/re-add the user to the Terminal Server to enable login." +msgstr "" #: ../../keyboard.pm:1 #, c-format -msgid "Hungarian" -msgstr "Угорська" +msgid "Spanish" +msgstr "╤спанська" -#: ../../keyboard.pm:1 +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "Start" +msgstr "Статус" + +#: ../../security/help.pm:1 #, c-format -msgid "Gurmukhi" +msgid "" +"Arguments: (arg)\n" +"\n" +"Activate/Disable ethernet cards promiscuity check." msgstr "" -#: ../../keyboard.pm:1 +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Configuring applications..." +msgstr "Настроюю принтер \"%s\"..." + +#: ../../network/netconnect.pm:1 #, c-format -msgid "Gujarati" -msgstr "" +msgid "Normal modem connection" +msgstr "Звичайне з'╓днання по модему" -#: ../../keyboard.pm:1 +#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "File Selection" +msgstr "Виб╕р пакет╕в" + +#: ../../network/isdn.pm:1 #, c-format -msgid "Greek" -msgstr "Грецька" +msgid "" +"Which ISDN configuration do you prefer?\n" +"\n" +"* The Old configuration uses isdn4net. It contains powerful\n" +" tools, but is tricky to configure, and not standard.\n" +"\n" +"* The New configuration is easier to understand, more\n" +" standard, but with less tools.\n" +"\n" +"We recommand the light configuration.\n" +msgstr "" +"Яку конф╕╜урац╕ю ISDN Ви бажа╓те встановити?\n" +"\n" +"* Стара конф╕╜урац╕я використуву╓ isdn4net. Досить потужн╕ засоби\n" +"входять до складу пакету, але його досить складно налагодити, ╕ в╕н не\n" +"╓ стандартним.\n" +"\n" +"* Нова конф╕╜урац╕я прост╕ша для розум╕ння, б╕льш стандартизована, але\n" +"ма╓ менше ╕нструментар╕ю.\n" +"\n" +"Ми рекоменду╓мо просту конф╕╜урац╕ю.\n" -#: ../../keyboard.pm:1 +#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1 #, c-format -msgid "Georgian (\"Latin\" layout)" -msgstr "Грузинська (латинська розкладка)" +msgid "CUPS" +msgstr "CUPS" -#: ../../keyboard.pm:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "Georgian (\"Russian\" layout)" -msgstr "Грузинська (рос╕йська розкладка)" +msgid "Run config tool" +msgstr "" -#: ../../keyboard.pm:1 +#: ../../any.pm:1 #, c-format -msgid "French" -msgstr "Французька" +msgid "Bootloader installation" +msgstr "Установка завантажувача" -#: ../../keyboard.pm:1 +#: ../../install_interactive.pm:1 #, c-format -msgid "Finnish" -msgstr "Ф╕нська" +msgid "Root partition size in MB: " +msgstr "Розм╕р п╕дрозд╕лу root в Мб:" -#: ../../keyboard.pm:1 +#: ../../install_steps_gtk.pm:1 #, c-format -msgid "Spanish" -msgstr "╤спанська" +msgid "This is a mandatory package, it can't be unselected" +msgstr "Цей пакет необх╕дний. Не можна в╕дм╕нити його виб╕р" -#: ../../keyboard.pm:1 +#: ../../standalone/drakTermServ:1 #, c-format -msgid "Estonian" -msgstr "Естонська" +msgid "Etherboot ISO image is %s" +msgstr "" -#: ../../keyboard.pm:1 +#: ../../services.pm:1 #, fuzzy, c-format -msgid "Dvorak (Swedish)" -msgstr "Дворака (США)" +msgid "" +"named (BIND) is a Domain Name Server (DNS) that is used to resolve host " +"names to IP addresses." +msgstr "" +"named (BIND) - це Сервер Назв Домен╕в (Domain Name Server, DNS), який\n" +"служить для визначення назв хост╕в за IP адресами та навпаки." -#: ../../keyboard.pm:1 +#: ../../standalone/drakconnect:1 #, c-format -msgid "Dvorak (Norwegian)" -msgstr "Дворака (Норвезька)" +msgid "Disconnect..." +msgstr "В╕дключення..." -#: ../../keyboard.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Dvorak (US)" -msgstr "Дворака (США)" +msgid "Saint Lucia" +msgstr "Санта Люч╕я" -#: ../../keyboard.pm:1 -#, c-format -msgid "Danish" -msgstr "Датська" +#: ../../standalone/drakbug:1 +#, fuzzy, c-format +msgid "Report" +msgstr "порт" -#: ../../keyboard.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Devanagari" -msgstr "" +msgid "Palau" +msgstr "Палау" -#: ../../keyboard.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "German (no dead keys)" -msgstr "Н╕мецька (без мертвих клав╕ш)" +msgid "level" +msgstr "р╕вень" -#: ../../keyboard.pm:1 +#: ../../share/advertising/13-mdkexpert_corporate.pl:1 #, c-format -msgid "German" -msgstr "Н╕мецька" +msgid "" +"All incidents will be followed up by a single qualified MandrakeSoft " +"technical expert." +msgstr "" -#: ../../keyboard.pm:1 +#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format -msgid "Czech (QWERTY)" -msgstr "Чеська (QWERTY)" +msgid "Package Group Selection" +msgstr "Виб╕р груп пакет╕в" -#: ../../keyboard.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Czech (QWERTZ)" -msgstr "Чеська (QWERTZ)" +msgid "Restore Via Network Protocol: %s" +msgstr "" -#: ../../keyboard.pm:1 +#: ../../modules/interactive.pm:1 #, c-format -msgid "Swiss (French layout)" -msgstr "Швейцарська (французька розкладка)" +msgid "You can configure each parameter of the module here." +msgstr "" -#: ../../keyboard.pm:1 +#: ../../Xconfig/resolution_and_depth.pm:1 #, c-format -msgid "Swiss (German layout)" -msgstr "Швейцарська (н╕мецька розкладка)" +msgid "Choose the resolution and the color depth" +msgstr "Вибер╕ть розд╕льну здатн╕сть та к╕льк╕сть кольор╕в" -#: ../../keyboard.pm:1 +#: ../../standalone/mousedrake:1 #, c-format -msgid "Belarusian" -msgstr "Б╕лоруська" - -#: ../../keyboard.pm:1 -#, fuzzy, c-format -msgid "Bosnian" -msgstr "Естонська" +msgid "Emulate third button?" +msgstr "╤м╕тувавати три кнопки?" -#: ../../keyboard.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Brazilian (ABNT-2)" -msgstr "Браз╕л╕йська (ABNT-2)" - -#: ../../keyboard.pm:1 -#, fuzzy, c-format -msgid "Bulgarian (BDS)" -msgstr "Болгарська" - -#: ../../keyboard.pm:1 -#, fuzzy, c-format -msgid "Bulgarian (phonetic)" -msgstr "В╕рменська (фонетична)" - -#: ../../keyboard.pm:1 -#, fuzzy, c-format -msgid "Bengali" -msgstr "дозволити" +msgid "" +"You can't create a new partition\n" +"(since you reached the maximal number of primary partitions).\n" +"First remove a primary partition and create an extended partition." +msgstr "" -#: ../../keyboard.pm:1 +#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 +#: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format -msgid "Belgian" -msgstr "Бельг╕йська" +msgid "Mount" +msgstr "Монтувати" + +#: ../../standalone/drakautoinst:1 +#, fuzzy, c-format +msgid "Creating auto install floppy" +msgstr "Створення автоустановочно╖ дискети" -#: ../../keyboard.pm:1 -#, c-format -msgid "Azerbaidjani (latin)" -msgstr "Азербайджанська (латина)" +#: ../../steps.pm:1 +#, fuzzy, c-format +msgid "Install updates" +msgstr "Встановити систему" -#: ../../keyboard.pm:1 +#: ../../standalone/draksplash:1 #, c-format -msgid "Arabic" +msgid "text box height" msgstr "" -#: ../../keyboard.pm:1 +#: ../../standalone/drakconnect:1 #, c-format -msgid "Armenian (phonetic)" -msgstr "В╕рменська (фонетична)" +msgid "State" +msgstr "Статус" -#: ../../keyboard.pm:1 +#: ../../standalone/drakfloppy:1 #, c-format -msgid "Armenian (typewriter)" -msgstr "В╕рменська (друкарська машинка)" +msgid "Be sure a media is present for the device %s" +msgstr "Пересв╕дч╕ться, що нос╕й вставлений в прив╕д %s" -#: ../../keyboard.pm:1 +#: ../../any.pm:1 #, c-format -msgid "Armenian (old)" -msgstr "В╕рменська (стара)" +msgid "Enable multiple profiles" +msgstr "Дозволити багатопроф╕льн╕сть" -#: ../../keyboard.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Albanian" -msgstr "Албанська" +msgid "" +"These options can backup and restore all files in your /etc directory.\n" +msgstr "" -#: ../../keyboard.pm:1 +#: ../../printer/main.pm:1 #, c-format -msgid "Polish" -msgstr "Польська" +msgid "Local printer" +msgstr "Локальний принтер" -#: ../../keyboard.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Dvorak" -msgstr "Дворака" +msgid "Files Restored..." +msgstr "" -#: ../../lang.pm:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "Zimbabwe" -msgstr "З╕мбабве" +msgid "Package selection" +msgstr "Виб╕р пакет╕в" #: ../../lang.pm:1 #, c-format -msgid "Zambia" -msgstr "Замб╕я" +msgid "Mauritania" +msgstr "Мавритан╕я" -#: ../../lang.pm:1 ../../standalone/drakxtv:1 +#: ../../standalone/drakgw:1 #, c-format -msgid "South Africa" -msgstr "П╕вдена Африка" - -#: ../../lang.pm:1 -#, fuzzy, c-format -msgid "Serbia" -msgstr "посл╕довний" +msgid "" +"I can keep your current configuration and assume you already set up a DHCP " +"server; in that case please verify I correctly read the Network that you use " +"for your local network; I will not reconfigure it and I will not touch your " +"DHCP server configuration.\n" +"\n" +"The default DNS entry is the Caching Nameserver configured on the firewall. " +"You can replace that with your ISP DNS IP, for example.\n" +"\t\t \n" +"Otherwise, I can reconfigure your interface and (re)configure a DHCP server " +"for you.\n" +"\n" +msgstr "" -#: ../../lang.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Mayotte" -msgstr "Майотт" +msgid "" +"No local printer found! To manually install a printer enter a device name/" +"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " +"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB " +"printer: /dev/usb/lp1, ...)." +msgstr "" -#: ../../lang.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Yemen" -msgstr "╢мен" +msgid "All primary partitions are used" +msgstr "Вс╕ основн╕ п╕дрозд╕ли зайнят╕" -#: ../../lang.pm:1 +#: ../../network/netconnect.pm:1 #, c-format -msgid "Samoa" -msgstr "Самоа" - -#: ../../lang.pm:1 -#, fuzzy, c-format -msgid "Wallis and Futuna" -msgstr "Вал╕с ╕ Футунськ╕ острови" +msgid "" +"After this is done, we recommend that you restart your X environment to " +"avoid any hostname-related problems." +msgstr "" +"П╕сля того, як це зак╕нчено, бажано перевантажити X сервер для того,\n" +"щоб позбутися проблеми ╕з зм╕ною назви хоста." -#: ../../lang.pm:1 +#: ../../services.pm:1 #, c-format -msgid "Vanuatu" -msgstr "Вануату" +msgid "Automatic detection and configuration of hardware at boot." +msgstr "" +"Автоматичне визначення та конф╕╜урування апаратного забезпечення при\n" +"завантаженн╕." -#: ../../lang.pm:1 +#: ../../standalone/drakpxe:1 #, fuzzy, c-format -msgid "Vietnam" -msgstr "В'╓тнам" +msgid "Installation Server Configuration" +msgstr "Конф╕╜урац╕я локально╖ мереж╕" -#: ../../lang.pm:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "Virgin Islands (U.S.)" -msgstr "В╕рг╕нськ╕ острови (США)" +msgid "Configuring IDE" +msgstr "Конф╕гурац╕я IDE" -#: ../../lang.pm:1 -#, c-format -msgid "Virgin Islands (British)" -msgstr "В╕рг╕нськ╕ острови (Британ╕я)" +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Network functionality not configured" +msgstr "Мон╕тор не сконф╕╜урований" -#: ../../lang.pm:1 -#, c-format -msgid "Venezuela" -msgstr "Венесуела" +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "Configure module" +msgstr "Сконф╕гуруйте мишу" #: ../../lang.pm:1 #, c-format -msgid "Saint Vincent and the Grenadines" -msgstr "Св. В╕нсент ╕ Гренад╕нз" +msgid "Cocos (Keeling) Islands" +msgstr "Кокосов╕ острови" -#: ../../lang.pm:1 +#: ../../standalone/net_monitor:1 #, fuzzy, c-format -msgid "Vatican" -msgstr "Латв╕йська" +msgid "Disconnecting from the Internet " +msgstr "З'╓днатися з ╕нтернетом" -#: ../../lang.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Uzbekistan" -msgstr "Узбекистан" +msgid "You'll need to reboot before the modification can take place" +msgstr "Щоб зм╕ни почали д╕яти Вам сл╕д перевантажити комп'ютер" -#: ../../lang.pm:1 +#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format -msgid "Uruguay" -msgstr "Уругвай" +msgid "Provider phone number" +msgstr "Номер телефону провайдера" -#: ../../lang.pm:1 -#, c-format -msgid "United States Minor Outlying Islands" -msgstr "Острови Сполучених Штат╕в Америки" +#: ../../printer/main.pm:1 +#, fuzzy, c-format +msgid "Host %s" +msgstr "Назва хоста" #: ../../lang.pm:1 #, c-format -msgid "Uganda" -msgstr "Уганда" +msgid "Armenia" +msgstr "В╕рмен╕я" #: ../../lang.pm:1 #, c-format -msgid "Ukraine" -msgstr "Укра╖на" +msgid "Fiji" +msgstr "Ф╕дж╕" -#: ../../lang.pm:1 +#: ../../security/help.pm:1 #, c-format -msgid "Tanzania" +msgid "" +"Arguments: (length, ndigits=0, nupper=0)\n" +"\n" +"Set the password minimum length and minimum number of digit and minimum " +"number of capitalized letters." msgstr "" -#: ../../lang.pm:1 -#, fuzzy, c-format -msgid "Taiwan" -msgstr "Тайланд" - -#: ../../lang.pm:1 +#: ../../any.pm:1 #, c-format -msgid "Tuvalu" -msgstr "Тувалу" +msgid "Second floppy drive" +msgstr "Другий прив╕д дискети" -#: ../../lang.pm:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "Trinidad and Tobago" -msgstr "Тр╕н╕дад та Тобаго" +msgid "About Harddrake" +msgstr "" -#: ../../lang.pm:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "Turkey" -msgstr "Турц╕я" +msgid "Drive capacity" +msgstr "" -#: ../../lang.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Tonga" -msgstr "Тонга" +msgid "" +"Insert a floppy in drive\n" +"All data on this floppy will be lost" +msgstr "" +"Вставте дискету в дисков╕д\n" +"Вс╕ дан╕ на ц╕й дискет╕ будуть втрачен╕" -#: ../../lang.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Tunisia" -msgstr "Тун╕с" +msgid "Size: %s" +msgstr "Розм╕р: %s" -#: ../../lang.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Turkmenistan" -msgstr "Туркмен╕стан" +msgid "Control and Shift keys simultaneously" +msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "East Timor" -msgstr "Сх╕дний Т╕мор" +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "secondary" +msgstr "%d секунд" -#: ../../lang.pm:1 -#, c-format -msgid "Tokelau" -msgstr "Токелау" +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "View Backup Configuration." +msgstr "Конф╕гурац╕я мереж╕" -#: ../../lang.pm:1 +#: ../../security/help.pm:1 #, c-format -msgid "Tajikistan" -msgstr "Таджикистан" +msgid "if set to yes, report check result to syslog." +msgstr "" -#: ../../lang.pm:1 +#. -PO: keep this short or else the buttons will not fit in the window +#: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format -msgid "Thailand" -msgstr "Тайланд" +msgid "No password" +msgstr "Без паролю" #: ../../lang.pm:1 #, c-format -msgid "Togo" -msgstr "Того" +msgid "Nigeria" +msgstr "Н╕гер╕я" -#: ../../lang.pm:1 +#: ../../install_interactive.pm:1 #, c-format -msgid "French Southern Territories" -msgstr "Французьк╕ П╕вденн╕ Територ╕╖" +msgid "There is no existing partition to use" +msgstr "Нема╓ ╕снуючих п╕дрозд╕л╕в для використання" -#: ../../lang.pm:1 -#, c-format -msgid "Chad" -msgstr "Чад" +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "" +"The following scanners\n" +"\n" +"%s\n" +"are available on your system.\n" +msgstr "У Ваш╕й систем╕ нема╓ адаптера мереж╕!" -#: ../../lang.pm:1 +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"To print to a TCP or socket printer, you need to provide the host name or IP " +"of the printer and optionally the port number (default is 9100). On HP " +"JetDirect servers the port number is usually 9100, on other servers it can " +"vary. See the manual of your hardware." +msgstr "" +"Щоб друкувати на принтер╕ в мереж╕, Вам потр╕бно надати назву хоста\n" +"принтера, та можливо номер порта. На серверах HP JetDirect номер порта\n" +"у б╕льшост╕ випадк╕в 9100, на ╕нших може\n" +"в╕др╕знятись. Проконсультуйтесь з ╕нструкц╕╓ю до апаратного\n" +"забезпечення." + +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Turks and Caicos Islands" -msgstr "Острови Туркс ╕ Кайкос" +msgid "Hard drive information" +msgstr "╤нформац╕я жорсткого диску" -#: ../../lang.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Swaziland" -msgstr "Сваз╕ленд" +msgid "Russian" +msgstr "Рос╕йська" #: ../../lang.pm:1 #, fuzzy, c-format -msgid "Syria" -msgstr "Сур╕нам" +msgid "Jordan" +msgstr "Йордан╕я" -#: ../../lang.pm:1 -#, c-format -msgid "El Salvador" -msgstr "Ель Сальвадор" +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "Hide files" +msgstr "зб╕й у mkraid" -#: ../../lang.pm:1 -#, c-format -msgid "Sao Tome and Principe" -msgstr "Сан-Томе ╕ Пр╕нс╕п╕" +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Auto-detect printers connected to this machine" +msgstr "В╕ддалений принтер" -#: ../../lang.pm:1 +#: ../../standalone/drakxtv:1 #, c-format -msgid "Suriname" -msgstr "Сур╕нам" +msgid "" +"XawTV isn't installed!\n" +"\n" +"\n" +"If you do have a TV card but DrakX has neither detected it (no bttv nor " +"saa7134\n" +"module in \"/etc/modules\") nor installed xawtv, please send the\n" +"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n" +"with subject \"undetected TV card\".\n" +"\n" +"\n" +"You can install it by typing \"urpmi xawtv\" as root, in a console." +msgstr "" -#: ../../lang.pm:1 +#: ../../any.pm:1 #, c-format -msgid "Somalia" -msgstr "Сомал╕" +msgid "Sorry, no floppy drive available" +msgstr "Перепрошую, нема╓ приводу дискети" #: ../../lang.pm:1 #, c-format -msgid "Senegal" -msgstr "Сенегал" +msgid "Bolivia" +msgstr "Бол╕в╕я" -#: ../../lang.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "San Marino" -msgstr "Сан Мар╕но" +msgid "" +"Set up your Windows server to make the printer available under the IPP " +"protocol and set up printing from this machine with the \"%s\" connection " +"type in Printerdrake.\n" +"\n" +msgstr "" -#: ../../lang.pm:1 +#: ../../install_steps_gtk.pm:1 #, c-format -msgid "Sierra Leone" -msgstr "Сь╓рра-Леоне" +msgid "Bad package" +msgstr "Пакети неробоч╕" -#: ../../lang.pm:1 +#: ../../share/advertising/07-server.pl:1 #, c-format -msgid "Slovakia" -msgstr "Словак╕я" +msgid "" +"Transform your computer into a powerful Linux server: Web server, mail, " +"firewall, router, file and print server (etc.) are just a few clicks away!" +msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Svalbard and Jan Mayen Islands" -msgstr "Свальбард╕йськ╕ ╕ Ян Майеньск╕ острови" +#: ../../security/level.pm:1 +#, fuzzy, c-format +msgid "DrakSec Basic Options" +msgstr "Параметри" -#: ../../lang.pm:1 +#: ../../standalone/draksound:1 #, c-format -msgid "Slovenia" -msgstr "Словен╕я" +msgid "" +"\n" +"\n" +"\n" +"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig " +"program. Just type \"sndconfig\" in a console." +msgstr "" #: ../../lang.pm:1 #, c-format -msgid "Saint Helena" -msgstr "Свята Елена" +msgid "Romania" +msgstr "Румун╕я" + +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "choose device" +msgstr "Пристр╕й завантаження" #: ../../lang.pm:1 #, c-format -msgid "Singapore" -msgstr "С╕нгапур" +msgid "Canada" +msgstr "Канада" -#: ../../lang.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Sudan" -msgstr "Судан" +msgid "Remove from LVM" +msgstr "Видалити з LVM" -#: ../../lang.pm:1 +#: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format -msgid "Seychelles" -msgstr "Сейшельськ╕ острови" +msgid "Timezone" +msgstr "Часовий пояс" -#: ../../lang.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Solomon Islands" -msgstr "Соломонов╕ острови" +msgid "German" +msgstr "Н╕мецька" -#: ../../lang.pm:1 +#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1 +#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Saudi Arabia" -msgstr "Сауд╕вська Арав╕я" +msgid "Next ->" +msgstr "Дал╕ ->" -#: ../../lang.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Rwanda" -msgstr "Руанда" +msgid "" +"Turning on this allows to print plain text files in japanese language. Only " +"use this function if you really want to print text in japanese, if it is " +"activated you cannot print accentuated characters in latin fonts any more " +"and you will not be able to adjust the margins, the character size, etc. " +"This setting only affects printers defined on this machine. If you want to " +"print japanese text on a printer set up on a remote machine, you have to " +"activate this function on that remote machine." +msgstr "" -#: ../../lang.pm:1 +#: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format -msgid "Russia" -msgstr "Рос╕йська" +msgid "" +"\n" +"Chances are, this partition is\n" +"a Driver partition. You should\n" +"probably leave it alone.\n" +msgstr "" +"\n" +"Можливо цей п╕дрозд╕л ╓ п╕дрозд╕лом\n" +"драйвера, вам мабуть не потр╕бно\n" +"його зм╕нювати.\n" #: ../../lang.pm:1 #, c-format -msgid "Romania" -msgstr "Румун╕я" +msgid "Guinea-Bissau" +msgstr "Гв╕нея-Б╕сау" -#: ../../lang.pm:1 +#: ../../Xconfig/monitor.pm:1 #, c-format -msgid "Reunion" -msgstr "Рен╕он" +msgid "Horizontal refresh rate" +msgstr "Частота горизонтально╖ розгортки" -#: ../../lang.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Qatar" -msgstr "Катар" +msgid "" +"Can't unset mount point as this partition is used for loop back.\n" +"Remove the loopback first" +msgstr "" +"Не можу зм╕нити точку монтування даного розд╕лу, оск╕льки в╕н\n" +"використову╓ться для зворотнього монтування. Спочатку в╕дм╕н╕ть\n" +"зворотн╓ монтування." + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "" +"The network configuration done during the installation cannot be started " +"now. Please check whether the network is accessable after booting your " +"system and correct the configuration using the Mandrake Control Center, " +"section \"Network & Internet\"/\"Connection\", and afterwards set up the " +"printer, also using the Mandrake Control Center, section \"Hardware\"/" +"\"Printer\"" +msgstr "" + +#: ../../harddrake/data.pm:1 +#, c-format +msgid "USB controllers" +msgstr "" + +#: ../../Xconfig/various.pm:1 +#, fuzzy, c-format +msgid "What norm is your TV using?" +msgstr "Який тип з'╓днання ISDN Ви ма╓те?" -#: ../../lang.pm:1 +#: ../../standalone/drakconnect:1 #, c-format -msgid "Palau" -msgstr "Палау" +msgid "Type:" +msgstr "Тип:" -#: ../../lang.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Paraguay" -msgstr "Парагвай" +msgid "Share name" +msgstr "Назва ресурсу" -#: ../../lang.pm:1 +#: ../../standalone/drakgw:1 #, c-format -msgid "Portugal" -msgstr "Португал╕я" +msgid "enable" +msgstr "дозволити" -#: ../../lang.pm:1 +#: ../../install_steps_interactive.pm:1 #, fuzzy, c-format -msgid "Palestine" -msgstr "Зберегти виб╕р пакет╕в" +msgid "" +"Contacting Mandrake Linux web site to get the list of available mirrors..." +msgstr "Зв'язуюсь з сервером щоб прочитати список наявних пакет╕в" -#: ../../lang.pm:1 +#: ../../network/netconnect.pm:1 #, c-format -msgid "Puerto Rico" -msgstr "ПуертоР╕ко" +msgid "" +"A problem occured while restarting the network: \n" +"\n" +"%s" +msgstr "" +"Проблема при перезапуску мереж╕:\n" +"\n" +"%s" -#: ../../lang.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Pitcairn" -msgstr "П╕ткарн" +msgid "Remove the loopback file?" +msgstr "Стертифайлу зворотнього монтування?" -#: ../../lang.pm:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "Saint Pierre and Miquelon" -msgstr "Св. П'╓р ╕ М╕келон" +msgid "Selected size is larger than available space" +msgstr "Вибраний розм╕р б╕льший за наявний прост╕р" -#: ../../lang.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Poland" -msgstr "Польща" +msgid "NCP server name missing!" +msgstr "Нема╓ назви сервера NCP!" -#: ../../lang.pm:1 -#, c-format -msgid "Pakistan" -msgstr "Пак╕стан" +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "Please choose your country." +msgstr "Який тип миш╕ ви ма╓те?" -#: ../../lang.pm:1 -#, c-format -msgid "Philippines" -msgstr "Ф╕л╕п╕ни" +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Hard Disk Backup files..." +msgstr "Поганий резервний файл" -#: ../../lang.pm:1 -#, c-format -msgid "Papua New Guinea" -msgstr "Папуа Нова Гв╕нея" +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Laotian" +msgstr "Латв╕йська" #: ../../lang.pm:1 #, c-format -msgid "French Polynesia" -msgstr "Французька Пол╕нез╕я" +msgid "Samoa" +msgstr "Самоа" -#: ../../lang.pm:1 +#: ../../services.pm:1 #, c-format -msgid "Peru" -msgstr "Перу" +msgid "" +"The rstat protocol allows users on a network to retrieve\n" +"performance metrics for any machine on that network." +msgstr "" +"Протокол rstat да╓ можлив╕сть користувачам в мереж╕ отримувати дан╕\n" +"про завантання будь-якого комп'ютера в ц╕й мереж╕." -#: ../../lang.pm:1 +#: ../../standalone/scannerdrake:1 #, c-format -msgid "Panama" -msgstr "Панама" +msgid "Re-generating list of configured scanners ..." +msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Oman" -msgstr "Омен" +#: ../../harddrake/data.pm:1 +#, fuzzy, c-format +msgid "Scanner" +msgstr "Вибер╕ть граф╕чну плату" -#: ../../lang.pm:1 -#, c-format -msgid "New Zealand" -msgstr "Нова Зеланд╕я" +#: ../../Xconfig/test.pm:1 +#, fuzzy, c-format +msgid "Warning: testing this graphic card may freeze your computer" +msgstr "" +"Увага! Тестування ц╕╓╖ граф╕чно╖ плати може призвести до зависання\n" +"Вашого комп'ютера." -#: ../../lang.pm:1 +#: ../../any.pm:1 #, c-format -msgid "Niue" -msgstr "Н╕уе" +msgid "" +"The user name must contain only lower cased letters, numbers, `-' and `_'" +msgstr "" +"╤м'я користувача повинно складатися т╕льки з малих латинських л╕тер,\n" +"чисел, `-' та `_'" -#: ../../lang.pm:1 +#: ../../standalone/drakbug:1 +#, fuzzy, c-format +msgid "Menudrake" +msgstr "визначальний" + +#: ../../security/level.pm:1 #, c-format -msgid "Nauru" -msgstr "Науру" +msgid "Welcome To Crackers" +msgstr "Зломщики! Ласкаво просимо!" -#: ../../lang.pm:1 +#: ../../modules/interactive.pm:1 #, c-format -msgid "Nepal" -msgstr "Непал" +msgid "Module options:" +msgstr "Опц╕╖ модуля:" -#: ../../lang.pm:1 +#: ../../share/advertising/11-mnf.pl:1 #, c-format -msgid "Nicaragua" -msgstr "Н╕карагуа" +msgid "Secure your networks with the Multi Network Firewall" +msgstr "" -#: ../../lang.pm:1 +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Go on without configuring the network" +msgstr "Конф╕гурую мережу" + +#: ../../network/isdn.pm:1 #, c-format -msgid "Nigeria" -msgstr "Н╕гер╕я" +msgid "Abort" +msgstr "В╕дм╕нити" -#: ../../lang.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Norfolk Island" -msgstr "Норфолкськ╕ острови" +msgid "No password prompt on %s at port %s" +msgstr "" -#: ../../lang.pm:1 +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Please check if you want to use the non-rewinding device." +msgstr "Вибер╕ть пакети, як╕ Ви хочете встановити" + +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "Usage of remote scanners" +msgstr "Використовувати в╕льний прост╕р" + +#: ../../standalone/drakbackup:1 #, c-format -msgid "Niger" -msgstr "Н╕гер" +msgid "\t-CDROM.\n" +msgstr "" -#: ../../lang.pm:1 +#: ../../install_interactive.pm:1 #, c-format -msgid "New Caledonia" -msgstr "Нова Каледон╕я" +msgid "" +"Your Windows partition is too fragmented. Please reboot your computer under " +"Windows, run the ``defrag'' utility, then restart the Mandrake Linux " +"installation." +msgstr "" +"П╕дрозд╕л з Windows на Вашому комп'ютер╕ занадто\n" +"фра╜ментований. Виконайте де-фра╜ментац╕ю \n" +"спочатку (команда ``defarg'')." -#: ../../lang.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Namibia" -msgstr "Нам╕б╕я" +msgid "Dvorak (Norwegian)" +msgstr "Дворака (Норвезька)" -#: ../../lang.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Mozambique" -msgstr "Мозамб╕к" +msgid "Hard Disk Backup Progress..." +msgstr "" -#: ../../lang.pm:1 +#: ../../standalone/drakfloppy:1 #, c-format -msgid "Malaysia" -msgstr "Малаз╕я" +msgid "Unable to fork: %s" +msgstr "Неможливо виконати fork: %s" -#: ../../lang.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Mexico" -msgstr "Мексика" +msgid "Type: " +msgstr "Тип: " -#: ../../lang.pm:1 +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "<-- Edit Client" +msgstr "Кл╕╓нт DHCP" + +#: ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "no fonts found" +msgstr "Не знайдено %s." + +#: ../../help.pm:1 ../../install_steps_interactive.pm:1 +#: ../../harddrake/data.pm:1 #, c-format -msgid "Malawi" -msgstr "Малав╕" +msgid "Mouse" +msgstr "Миша" -#: ../../lang.pm:1 +#: ../../bootloader.pm:1 #, c-format -msgid "Maldives" -msgstr "Мальд╕ви" +msgid "not enough room in /boot" +msgstr "недостатньо м╕сця в /boot" -#: ../../lang.pm:1 +#: ../../harddrake/sound.pm:1 #, c-format -msgid "Mauritius" -msgstr "Маврик╕й" +msgid "Choosing an arbitratry driver" +msgstr "" -#: ../../lang.pm:1 +#: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format -msgid "Malta" -msgstr "Мальта" +msgid "Host name" +msgstr "Назва хоста" #: ../../lang.pm:1 #, c-format -msgid "Montserrat" -msgstr "Монсеррат" +msgid "Liechtenstein" +msgstr "Л╕хтенштейн" -#: ../../lang.pm:1 +#: ../../standalone/draksplash:1 #, c-format -msgid "Mauritania" -msgstr "Мавритан╕я" +msgid "the color of the progress bar" +msgstr "" -#: ../../lang.pm:1 +#: ../../standalone/drakfont:1 #, c-format -msgid "Martinique" -msgstr "Март╕н╕ка" +msgid "Suppress Fonts Files" +msgstr "" -#: ../../lang.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Northern Mariana Islands" -msgstr "П╕вн╕чн╕ Мар╕анськ╕ острови" +msgid "Add to RAID" +msgstr "Додати до RAID" -#: ../../lang.pm:1 +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"You can add additional entries in yaboot for other operating systems,\n" +"alternate kernels, or for an emergency boot image.\n" +"\n" +"For other OSs, the entry consists only of a label and the \"root\"\n" +"partition.\n" +"\n" +"For Linux, there are a few possible options:\n" +"\n" +" * Label: this is the name you will have to type at the yaboot prompt to\n" +"select this boot option.\n" +"\n" +" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n" +"variation of vmlinux with an extension.\n" +"\n" +" * Root: the \"root\" device or ``/'' for your Linux installation.\n" +"\n" +" * Append: on Apple hardware, the kernel append option is often used to\n" +"assist in initializing video hardware, or to enable keyboard mouse button\n" +"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n" +"The following are some examples:\n" +"\n" +" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" +"hda=autotune\n" +"\n" +" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" +"\n" +" * Initrd: this option can be used either to load initial modules before\n" +"the boot device is available, or to load a ramdisk image for an emergency\n" +"boot situation.\n" +"\n" +" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n" +"need to allocate a large ramdisk, this option can be used to specify a\n" +"ramdisk larger than the default.\n" +"\n" +" * Read-write: normally the \"root\" partition is initially mounted as\n" +"read-only, to allow a file system check before the system becomes ``live''.\n" +"You can override the default with this option.\n" +"\n" +" * NoVideo: should the Apple video hardware prove to be exceptionally\n" +"problematic, you can select this option to boot in ``novideo'' mode, with\n" +"native frame buffer support.\n" +"\n" +" * Default: selects this entry as being the default Linux selection,\n" +"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n" +"highlighted with a ``*'' if you press [Tab] to see the boot selections." +msgstr "" +"Можете додати додатков╕ пункти для yaboot, або для операц╕йних систем,\n" +"╕нших ядер чи для авар╕йного образу завантаження.\n" +"\n" +"Для ╕нших ОС - пункт склада╓ться т╕льки з етикетки та п╕дрозд╕лу для\n" +"коренево╖ файлово╖ системи.\n" +"\n" +"Для Л╕накса ╓ к╕лька можливих параметр╕в: \n" +"\n" +" * Етикетка: це просто назва, яку ви ма╓те надрукувати при запрошенн╕\n" +"yaboot, щоб вибрати цю опц╕ю завантаження.\n" +"\n" +" * Образ: це - назва ядра для завантаження. У б╕льшост╕ випадк╕в - це\n" +"vmlinux або вар╕анти назви з р╕зними розширеннями.\n" +"\n" +" * Коренева файлова система: пристр╕й для коренево╖ файлово╖ системи,\n" +"або '/' вашо╖ системи Л╕накс.\n" +"\n" +"\n" +" * Додати: на апаратному забезпеченн╕ Apple досить часто\n" +"використовуються додатков╕ параметри для ╕н╕ц╕ал╕зац╕╖ в╕део-плати або\n" +"для того, щоб ╕н╕ц╕ал╕зувати клав╕атурну емуляц╕ю клав╕ш мишки, через\n" +"те, що на стандартн╕й мишц╕ Apple нема╓ 2-╖ ╕ 3-╖ клав╕ш╕. Дал╕ подан╕\n" +"деяк╕ приклади: \n" +"\n" +" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 " +"hda=autotune\n" +"\n" +" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" +"\n" +"\n" +" * Initrd: цей параметр може використовуватися для того, щоб\n" +"завантажувати модул╕ до того, як пристр╕й завантаження доступний, або\n" +"щоб прочитати в╕ртуальний диск для авар╕йного завантаження.\n" +"\n" +" * Розм╕р initrd: стандартний в╕ртуальний диск ма╓ розм╕р 4096 байт,\n" +"якщо вам потр╕бен диск б╕льшого розм╕ру, можете скористуватися цим\n" +"параметром.\n" +"\n" +" * Запис/читання: звично коренева файлова система монту╓ться в режим╕\n" +"т╕льки для читання, для того, щоб мати можлив╕сть провести перев╕рку\n" +"файлово╖ системи перш, н╕ж система завантажу╓ться в робочий режим. Це\n" +"можна в╕дм╕нити тут.\n" +"\n" +" * БезВ╕део: у випадку, коли в╕део плата Apple виявиться особливо\n" +"проблематичною, ви можете вибрати цей параметр для того, щоб\n" +"скористуватися стандартним framebuffer'ом.\n" +"\n" +" * Стандарна: система вибрана в цьому пункт╕ завантажиться зразу\n" +"п╕сля того, як ви натиснете ENTER на запрошенн╕ yaboot. Цей пункт буде\n" +"також показаний символом *, якщо ви натиснете TAB, щоб подивитися\n" +"список систем. " + +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Mongolia" -msgstr "Монгол╕я" +msgid "" +"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP." +msgstr "" -#: ../../lang.pm:1 +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "No floppy drive available!" +msgstr "Нема╓ привода дискети" + +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Myanmar" -msgstr "Мьянмар" +msgid "" +"To know about the options available for the current printer read either the " +"list shown below or click on the \"Print option list\" button.%s%s%s\n" +"\n" +msgstr "" -#: ../../lang.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Mali" -msgstr "Мал╕" +msgid "Continue anyway?" +msgstr "Все-таки продовжувати?" -#: ../../lang.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Macedonia" -msgstr "Македон╕я" +msgid "" +"If your printer is not listed, choose a compatible (see printer manual) or a " +"similar one." +msgstr "" -#: ../../lang.pm:1 +#: ../../help.pm:1 ../../install_steps_interactive.pm:1 +#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1 #, c-format -msgid "Marshall Islands" -msgstr "Маршалов╕ острови" +msgid "Printer" +msgstr "Принтер" #: ../../lang.pm:1 #, c-format -msgid "Madagascar" -msgstr "Мадагаскар" +msgid "Saudi Arabia" +msgstr "Сауд╕вська Арав╕я" -#: ../../lang.pm:1 +#: ../../services.pm:1 #, c-format -msgid "Moldova" -msgstr "Молдав╕я" +msgid "Internet" +msgstr "╤нтернет" -#: ../../lang.pm:1 +#: ../../standalone/service_harddrake:1 #, c-format -msgid "Monaco" -msgstr "Монако" +msgid "Some devices were added:\n" +msgstr "" -#: ../../lang.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Morocco" -msgstr "Мароко" +msgid "Geometry: %s cylinders, %s heads, %s sectors\n" +msgstr "Геометр╕я: %s цил╕ндр╕в, %s головок, %s сектор╕в\n" -#: ../../lang.pm:1 +#: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "Libya" -msgstr "Л╕бер╕я" +msgid "Printing on the printer \"%s\"" +msgstr "Вимикаю мережу" -#: ../../lang.pm:1 +#: ../../standalone/drakTermServ:1 #, c-format -msgid "Latvia" -msgstr "Латв╕я" +msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed" +msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Luxembourg" -msgstr "Люксембур╜" +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Restore From Tape" +msgstr "В╕дновити таблицю п╕дрозд╕л╕в" -#: ../../lang.pm:1 +#: ../../network/netconnect.pm:1 #, c-format -msgid "Lithuania" -msgstr "Литва" +msgid "Choose the profile to configure" +msgstr "Вибер╕ть проф╕ль для конф╕гурац╕╖:" -#: ../../lang.pm:1 +#: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format -msgid "Lesotho" -msgstr "Лесото" +msgid "" +"\n" +"\n" +"Enter a Zeroconf host name without any dot if you don't\n" +"want to use the default host name." +msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Liberia" -msgstr "Л╕бер╕я" +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Backup Now from configuration file" +msgstr "Конф╕гурац╕я мереж╕" -#: ../../lang.pm:1 -#, c-format -msgid "Sri Lanka" -msgstr "Шр╕ Ланка" +#: ../../fsedit.pm:1 +#, fuzzy, c-format +msgid "Mount points should contain only alphanumerical characters" +msgstr "" +"Назва принтера ма╓ складатися т╕льки з л╕тер, цифр та символа п╕дкреслення." -#: ../../lang.pm:1 -#, c-format -msgid "Liechtenstein" -msgstr "Л╕хтенштейн" +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Restarting printing system..." +msgstr "Яку систему друку Ви хочете використовувати?" -#: ../../lang.pm:1 +#: ../../security/help.pm:1 #, c-format -msgid "Saint Lucia" -msgstr "Санта Люч╕я" +msgid "" +"Arguments: (name)\n" +"\n" +"Add the name as an exception to the handling of password aging by msec." +msgstr "" -#: ../../lang.pm:1 +#: ../../modules/interactive.pm:1 #, c-format -msgid "Lebanon" -msgstr "Л╕ван" +msgid "See hardware info" +msgstr "Перегляньте ╕нформац╕ю про апаратне забезпечення" -#: ../../lang.pm:1 +#: ../../any.pm:1 #, c-format -msgid "Laos" -msgstr "" +msgid "First sector of boot partition" +msgstr "Перший сектор системного п╕дрозд╕лу (boot partition)" -#: ../../lang.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Kazakhstan" -msgstr "Казахстан" +msgid "Printer manufacturer, model" +msgstr "Виробник принтера, модель" -#: ../../lang.pm:1 +#: ../../printer/data.pm:1 #, c-format -msgid "Cayman Islands" -msgstr "Кайманськ╕ острови" +msgid "PDQ - Print, Don't Queue" +msgstr "PDQ - Print, Don't Queue" -#: ../../lang.pm:1 +#: ../../standalone.pm:1 #, c-format -msgid "Kuwait" -msgstr "Кувейт" +msgid "" +"[OPTIONS]...\n" +"Mandrake Terminal Server Configurator\n" +"--enable : enable MTS\n" +"--disable : disable MTS\n" +"--start : start MTS\n" +"--stop : stop MTS\n" +"--adduser : add an existing system user to MTS (requires username)\n" +"--deluser : delete an existing system user from MTS (requires " +"username)\n" +"--addclient : add a client machine to MTS (requires MAC address, IP, " +"nbi image name)\n" +"--delclient : delete a client machine from MTS (requires MAC address, " +"IP, nbi image name)" +msgstr "" -#: ../../lang.pm:1 -#, fuzzy, c-format -msgid "Korea" -msgstr "Ще" +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "Subnet Mask:" +msgstr "" -#: ../../lang.pm:1 +#: ../../standalone/drakboot:1 #, c-format -msgid "Korea (North)" +msgid "LiLo and Bootsplash themes installation successfull" msgstr "" -#: ../../lang.pm:1 +#: ../../Xconfig/monitor.pm:1 #, c-format -msgid "Saint Kitts and Nevis" -msgstr "Св. К╕тс ╕ Нев╕с" +msgid "" +"The two critical parameters are the vertical refresh rate, which is the " +"rate\n" +"at which the whole screen is refreshed, and most importantly the horizontal\n" +"sync rate, which is the rate at which scanlines are displayed.\n" +"\n" +"It is VERY IMPORTANT that you do not specify a monitor type with a sync " +"range\n" +"that is beyond the capabilities of your monitor: you may damage your " +"monitor.\n" +" If in doubt, choose a conservative setting." +msgstr "" +"Два дуже важливих параметри - це частота вертикально╖ розгортки\n" +"(тобто - частота, з якою обновлю╓ться зображення на екран╕), та\n" +"найб╕льш важливо - частота горизонтально╖ синхрон╕зац╕╖ (тобто - та\n" +"частота, з якою на екран╕ малюються горизонтальн╕ рядки).\n" +"\n" +"ДУЖЕ ВАЖЛИВО ПАМ'ЯТАТИ, що ви повинн╕ вибрати такий мон╕тор, параметри\n" +"якого не перевищують справжн╕х параметр╕в Вашого мон╕тора: ╕накше Ви\n" +"можете причинити непоправну шкоду сво╓му мон╕тору. \n" +"Якщо ви ма╓те сумн╕ви щодо характеристик свого мон╕тора вибер╕ть певно\n" +"г╕рший мон╕тор." -#: ../../lang.pm:1 +#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 #, c-format -msgid "Comoros" -msgstr "Коморськ╕ острови" +msgid "Modify" +msgstr "Зм╕нити" -#: ../../lang.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Kiribati" -msgstr "К╕р╕бат╕" +msgid "" +"\n" +"The \"%s\" and \"%s\" commands also allow to modify the option settings for " +"a particular printing job. Simply add the desired settings to the command " +"line, e. g. \"%s \".\n" +msgstr "" -#: ../../lang.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Cambodia" -msgstr "Камбоджа" +msgid "Need hostname, username and password!" +msgstr "" -#: ../../lang.pm:1 +#: ../../diskdrake/dav.pm:1 #, c-format -msgid "Kyrgyzstan" -msgstr "Киргизстан" +msgid "" +"WebDAV is a protocol that allows you to mount a web server's directory\n" +"locally, and treat it like a local filesystem (provided the web server is\n" +"configured as a WebDAV server). If you would like to add WebDAV mount\n" +"points, select \"New\"." +msgstr "" -#: ../../lang.pm:1 +#: ../../standalone/drakbug:1 #, c-format -msgid "Kenya" -msgstr "Кен╕я" +msgid "HardDrake" +msgstr "" -#: ../../lang.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Japan" -msgstr "Япон╕я" +msgid "new" +msgstr "новий" -#: ../../lang.pm:1 +#: ../../install_steps_interactive.pm:1 #, fuzzy, c-format -msgid "Jordan" -msgstr "Йордан╕я" +msgid "Would you like to try again?" +msgstr "Чи треба Вам настро╖ти друк?" -#: ../../lang.pm:1 +#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1 #, c-format -msgid "Jamaica" -msgstr "Ямайка" +msgid "Wizard" +msgstr "Пом╕чник" -#: ../../lang.pm:1 -#, c-format -msgid "Iceland" -msgstr "╤сланд╕я" +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Edit selected server" +msgstr "знайдено %s" -#: ../../lang.pm:1 +#: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "Iran" -msgstr "╤рак" +msgid "Please choose where you want to backup" +msgstr "Вибер╕ть пакети, як╕ Ви хочете встановити" -#: ../../lang.pm:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "Iraq" -msgstr "╤рак" +msgid "You need to reboot for the partition table modifications to take place" +msgstr "" +"Для того, щоб таблиця п╕дрозд╕л╕в була актив╕зована, Вам треба\n" +"перевантажити систему" -#: ../../lang.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "British Indian Ocean Territory" -msgstr "Британська територ╕я в ╤нд╕йському океан╕" +msgid "Do not include the browser cache" +msgstr "" -#: ../../lang.pm:1 +#: ../../standalone/keyboarddrake:1 #, c-format -msgid "India" -msgstr "╤нд╕я" +msgid "Please, choose your keyboard layout." +msgstr "Яка у Вас розкладка клав╕атури?" -#: ../../lang.pm:1 +#: ../../mouse.pm:1 ../../security/level.pm:1 #, c-format -msgid "Israel" -msgstr "╤зра╕ль" - -#: ../../lang.pm:1 ../../standalone/drakxtv:1 -#, fuzzy, c-format -msgid "Ireland" -msgstr "╤сландська" +msgid "Standard" +msgstr "Стандартний" -#: ../../lang.pm:1 +#: ../../standalone/mousedrake:1 #, c-format -msgid "Indonesia" -msgstr "╤ндонез╕я" +msgid "Please choose your mouse type." +msgstr "Який тип миш╕ ви ма╓те?" -#: ../../lang.pm:1 +#: ../../standalone/drakconnect:1 #, c-format -msgid "Hungary" -msgstr "Угорщина" +msgid "Connect..." +msgstr "З'╓днання..." -#: ../../lang.pm:1 -#, c-format -msgid "Haiti" -msgstr "Га╕т╕" +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Failed to configure printer \"%s\"!" +msgstr "Настроюю принтер \"%s\"..." -#: ../../lang.pm:1 -#, c-format -msgid "Croatia" -msgstr "Хорват╕я" +#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "not configured" +msgstr "перенастро╖ти" -#: ../../lang.pm:1 +#: ../../network/isdn.pm:1 #, c-format -msgid "Honduras" -msgstr "Гондурас" +msgid "ISA / PCMCIA" +msgstr "ISA / PCMCIA" -#: ../../lang.pm:1 +#: ../../standalone/drakfont:1 #, fuzzy, c-format -msgid "Heard and McDonald Islands" -msgstr "Хердськ╕ ╕ МакДональдськ╕ острови" +msgid "About" +msgstr "В╕дм╕нити" -#: ../../lang.pm:1 +#: ../../network/network.pm:1 #, c-format -msgid "Hong Kong" -msgstr "Гон╜ Кон╜" +msgid "Proxies configuration" +msgstr "Конф╕╜урац╕я прокс╕" -#: ../../lang.pm:1 +#: ../../mouse.pm:1 #, c-format -msgid "China" -msgstr "Китай" +msgid "GlidePoint" +msgstr "GlidePoint" -#: ../../lang.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Guyana" -msgstr "╫аяна" +msgid "Start: sector %s\n" +msgstr "Початок: сектор %s\n" -#: ../../lang.pm:1 -#, c-format -msgid "Guinea-Bissau" -msgstr "Гв╕нея-Б╕сау" +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "Network interface already configured" +msgstr "Мон╕тор не сконф╕╜урований" -#: ../../lang.pm:1 +#: ../../standalone/drakTermServ:1 #, c-format -msgid "Guam" -msgstr "╫уам" +msgid "Couldn't access the floppy!" +msgstr "" -#: ../../lang.pm:1 +#: ../../standalone/drakbug:1 #, c-format -msgid "Guatemala" -msgstr "╫ватемала" +msgid "connecting to Bugzilla wizard ..." +msgstr "" -#: ../../lang.pm:1 +#: ../../network/drakfirewall.pm:1 #, fuzzy, c-format -msgid "South Georgia and the South Sandwich Islands" -msgstr "П╕вдена Джордж╕я ╕ П╕вден╕ Сандв╕чськ╕ острови" +msgid "Mail Server" +msgstr "База даних" -#: ../../lang.pm:1 +#: ../../diskdrake/hd_gtk.pm:1 #, c-format -msgid "Equatorial Guinea" -msgstr "Екватор╕альна Гв╕нея" +msgid "Please click on a partition" +msgstr "Клацн╕ть, будь-ласка, на п╕дрозд╕л╕" -#: ../../lang.pm:1 +#: ../../any.pm:1 ../../standalone/drakbackup:1 #, c-format -msgid "Guadeloupe" -msgstr "╫ваделупа" +msgid "Linux" +msgstr "Л╕накс" -#: ../../lang.pm:1 +#: ../../standalone/drakxtv:1 #, c-format -msgid "Guinea" -msgstr "╫в╕нея" +msgid "Have a nice day!" +msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Gambia" -msgstr "╫амб╕я" +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "across Network" +msgstr "Мережа:" -#: ../../lang.pm:1 +#: ../../help.pm:1 #, c-format -msgid "Greenland" -msgstr "╫ренланд╕я" +msgid "/dev/fd0" +msgstr "/dev/fd0" -#: ../../lang.pm:1 -#, c-format -msgid "Gibraltar" -msgstr "╫╕бралтар" +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Upgrade %s" +msgstr "Поновлення" -#: ../../lang.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Ghana" -msgstr "╫ана" +msgid "Select Printer Connection" +msgstr "Вибер╕ть з'╓днання принтера" -#: ../../lang.pm:1 +#: ../../standalone/drakxtv:1 #, c-format -msgid "French Guiana" -msgstr "Французька ╫аяна" +msgid "Scanning for TV channels in progress ..." +msgstr "" -#: ../../lang.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Georgia" -msgstr "Груз╕я" +msgid "" +"Error during sending file via FTP.\n" +" Please correct your FTP configuration." +msgstr "" -#: ../../lang.pm:1 +#: ../../standalone/drakTermServ:1 #, c-format -msgid "Grenada" -msgstr "╫ренада" +msgid "IP Range Start:" +msgstr "" -#: ../../lang.pm:1 ../../network/tools.pm:1 +#: ../../services.pm:1 #, c-format -msgid "United Kingdom" -msgstr "Об'╓днане Корол╕вство" +msgid "" +"The internet superserver daemon (commonly called inetd) starts a\n" +"variety of other internet services as needed. It is responsible for " +"starting\n" +"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " +"disables\n" +"all of the services it is responsible for." +msgstr "" +"Суперсервер демон (б╕льш в╕домий п╕д назвою inetd) служить для запуску\n" +"р╕зноман╕тних серв╕с╕в ╤нтернету, коли це необх╕дно. В╕н\n" +"в╕дпов╕дальний за старт багатьох серв╕с╕в, таких як telnet, ftp, rsh,\n" +"та rlogin. При непрацюючому сервер╕ inetd не будуть також працювати\n" +"вс╕ ╕нш╕ серв╕си." -#: ../../lang.pm:1 +#: ../../standalone/draksplash:1 #, c-format -msgid "Gabon" -msgstr "╫абон" +msgid "the height of the progress bar" +msgstr "" -#: ../../lang.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Faroe Islands" -msgstr "Фарерськ╕ острови" +msgid "" +"\n" +"- Save via %s on host: %s\n" +msgstr "" -#: ../../lang.pm:1 +#: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format -msgid "Micronesia" -msgstr "М╕кронез╕я" +msgid "Argentina" +msgstr "Аргентина" -#: ../../lang.pm:1 +#: ../../security/help.pm:1 #, c-format -msgid "Falkland Islands (Malvinas)" -msgstr "Фолклендськ╕ острови (Мальв╕нськ╕)" +msgid "" +"Arguments: (arg)\n" +"\n" +" Accept/Refuse broadcasted icmp echo." +msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Fiji" -msgstr "Ф╕дж╕" +#: ../../network/drakfirewall.pm:1 +#, fuzzy, c-format +msgid "Domain Name Server" +msgstr "Назва домену" -#: ../../lang.pm:1 -#, c-format -msgid "Finland" -msgstr "Ф╕нлянд╕я" +#: ../../standalone/draksec:1 +#, fuzzy, c-format +msgid "Security Level:" +msgstr "Встановлення р╕вня безпеки" -#: ../../lang.pm:1 +#: ../../fsedit.pm:1 #, c-format -msgid "Ethiopia" -msgstr "Еф╕оп╕я" +msgid "Mount points must begin with a leading /" +msgstr "Точка монтування повинна починатися з /" -#: ../../lang.pm:1 +#: ../../standalone/logdrake:1 +#, fuzzy, c-format +msgid "Postfix Mail Server" +msgstr "Поштовий сервер postfix, сервер новин inn" + +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Spain" -msgstr "╤спан╕я" +msgid "Quit without saving" +msgstr "Вийти без запису" #: ../../lang.pm:1 #, c-format -msgid "Eritrea" -msgstr "Ер╕треа" +msgid "Yemen" +msgstr "╢мен" -#: ../../lang.pm:1 +#: ../../share/advertising/11-mnf.pl:1 #, c-format -msgid "Western Sahara" -msgstr "Зах╕дна Сахара" +msgid "This product is available on the MandrakeStore Web site." +msgstr "" -#: ../../lang.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Egypt" -msgstr "╢╜ипт" +msgid "" +"Please enter the maximum size\n" +" allowed for Drakbackup" +msgstr "" -#: ../../lang.pm:1 +#: ../../interactive/stdio.pm:1 #, c-format -msgid "Estonia" -msgstr "Естон╕я" +msgid "=> There are many things to choose from (%s).\n" +msgstr "" -#: ../../lang.pm:1 +#: ../../steps.pm:1 #, c-format -msgid "Ecuador" -msgstr "Еквадор" +msgid "Hard drive detection" +msgstr "Визначення типу диску" -#: ../../lang.pm:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "Algeria" -msgstr "Алгер╕я" +msgid "" +"You haven't selected any group of packages.\n" +"Please choose the minimal installation you want:" +msgstr "" + +#: ../../diskdrake/dav.pm:1 +#, fuzzy, c-format +msgid "Please enter the WebDAV server URL" +msgstr "Випробуйте мишку, будь-ласка" #: ../../lang.pm:1 #, c-format -msgid "Dominican Republic" -msgstr "Дом╕н╕канська республ╕ка" +msgid "Tajikistan" +msgstr "Таджикистан" -#: ../../lang.pm:1 +#: ../../help.pm:1 ../../install_steps_gtk.pm:1 +#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1 #, c-format -msgid "Dominica" -msgstr "Дом╕н╕ка" +msgid "Accept" +msgstr "Прийняти" -#: ../../lang.pm:1 +#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1 #, c-format -msgid "Denmark" -msgstr "Дан╕я" +msgid "Description" +msgstr "Опис" -#: ../../lang.pm:1 +#: ../../fsedit.pm:1 #, c-format -msgid "Djibouti" -msgstr "Джибут╕" +msgid "Error opening %s for writing: %s" +msgstr "Не можу в╕дкрити %s на запис: %s" -#: ../../lang.pm:1 +#: ../../Xconfig/various.pm:1 #, c-format -msgid "Cyprus" -msgstr "К╕пр" +msgid "Mouse type: %s\n" +msgstr "Тип миш╕: %s\n" -#: ../../lang.pm:1 +#: ../../Xconfig/card.pm:1 #, c-format -msgid "Christmas Island" -msgstr "Р╕здва остр╕в" +msgid "Your card can have 3D hardware acceleration support with XFree %s." +msgstr "" +"Ваша в╕деоплата може користуватися апаратним 3D прискоренням граф╕ки\n" +"але т╕льки з сервером XFree %s." -#: ../../lang.pm:1 +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Please choose your CD/DVD media size (Mb)" +msgstr "Яка у Вас розкладка клав╕атури?" + +#: ../../security/help.pm:1 #, c-format -msgid "Cape Verde" -msgstr "Острови Зеленого Мису" +msgid "" +"Arguments: (arg)\n" +"\n" +" Enabling su only from members of the wheel group or allow su from any user." +msgstr "" -#: ../../lang.pm:1 +#: ../../standalone/drakfloppy:1 #, c-format -msgid "Cuba" -msgstr "Куба" +msgid "Expert Area" +msgstr "Д╕лянка для експерт╕в" -#: ../../lang.pm:1 +#: ../../Xconfig/monitor.pm:1 #, c-format -msgid "Colombia" -msgstr "Колумб╕я" +msgid "Choose a monitor" +msgstr "Вибер╕ть тип мон╕тору" -#: ../../lang.pm:1 +#: ../../any.pm:1 #, c-format -msgid "Cameroon" -msgstr "Камерун" +msgid "Empty label not allowed" +msgstr "Не дозволяються пуст╕ етикетки" -#: ../../lang.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Chile" -msgstr "Ч╕л╕" +msgid "Maltese (UK)" +msgstr "" -#: ../../lang.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Cook Islands" -msgstr "Кука острови" +msgid "I can't add any more partition" +msgstr "Не можу додати жодного п╕дрозд╕лу" -#: ../../lang.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Cote d'Ivoire" -msgstr "Кои д'╤вуар" +msgid "Size in MB: " +msgstr "Розм╕р (Мб): " -#: ../../lang.pm:1 +#: ../../printer/main.pm:1 #, c-format -msgid "Switzerland" -msgstr "Швейцар╕я" +msgid "Remote printer" +msgstr "В╕ддалений принтер" -#: ../../lang.pm:1 +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "Please choose a language to use." +msgstr "Вибер╕ть, будь-ласка, мову." + +#: ../../network/network.pm:1 #, c-format -msgid "Congo (Brazzaville)" +msgid "" +"WARNING: this device has been previously configured to connect to the " +"Internet.\n" +"Simply accept to keep this device configured.\n" +"Modifying the fields below will override this configuration." msgstr "" +"УВАГА: Цей пристр╕й було попередньо настро╓но для з'╓днання з ╤нтернетом.\n" +"\n" +"Просто натисн╕ть \"Гаразд\" щоб зберегти конф╕╜урац╕ю пристрою.\n" +"Зм╕на пол╕в нижче приведе до зм╕ни конф╕╜урац╕╖ пристрою." -#: ../../lang.pm:1 -#, c-format -msgid "Central African Republic" -msgstr "Центральна Африканська Республ╕ка" +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "I can set up your computer to automatically log on one user." +msgstr "" +"Я можу настро╖ти Вашу систему так, що X буде стартувати автоматично\n" +"п╕сля завантаження системи.\n" +"Чи ви бажа╓те скористуватися ц╕╓ю можлив╕стю?" -#: ../../lang.pm:1 +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "Floppy format" +msgstr "Форматувати" + +#: ../../standalone/harddrake2:1 #, c-format -msgid "Congo (Kinshasa)" +msgid "" +"the WP flag in the CR0 register enforce write proctection at the memory page " +"level, thus enabling the processor to prevent kernel accesses)" msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Cocos (Keeling) Islands" -msgstr "Кокосов╕ острови" +#: ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "Generic Printers" +msgstr "Принтер" -#: ../../lang.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Canada" -msgstr "Канада" +msgid "" +"Please choose the printer to which the print jobs should go or enter a " +"device name/file name in the input line" +msgstr "" -#: ../../lang.pm:1 +#: ../../standalone/scannerdrake:1 #, c-format -msgid "Belize" -msgstr "Бел╕з" +msgid "The scanners on this machine are available to other computers" +msgstr "" -#: ../../lang.pm:1 -#, c-format -msgid "Belarus" -msgstr "Б╕лорусь" +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "First sector of the root partition" +msgstr "Перший сектор системного п╕дрозд╕лу (boot partition)" -#: ../../lang.pm:1 -#, c-format -msgid "Botswana" -msgstr "Ботсвана" +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "Alternative drivers" +msgstr "Додаткова тестова стор╕нка (A4)" -#: ../../lang.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Bouvet Island" -msgstr "Буве" +msgid "" +"\n" +"Please check all options that you need.\n" +msgstr "" -#: ../../lang.pm:1 +#: ../../any.pm:1 #, c-format -msgid "Bhutan" -msgstr "Бутан" +msgid "Initrd" +msgstr "Initrd" #: ../../lang.pm:1 #, c-format -msgid "Bahamas" -msgstr "Багами" +msgid "Cape Verde" +msgstr "Острови Зеленого Мису" -#: ../../lang.pm:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "Brazil" -msgstr "Бразил╕я" +msgid "whether this cpu has the Cyrix 6x86 Coma bug" +msgstr "" -#: ../../lang.pm:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "Bolivia" -msgstr "Бол╕в╕я" +msgid "early pentiums were buggy and freezed when decoding the F00F bytecode" +msgstr "" #: ../../lang.pm:1 #, c-format -msgid "Brunei Darussalam" -msgstr "Брунейський Даруссалам" +msgid "Guam" +msgstr "╫уам" -#: ../../lang.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Bermuda" -msgstr "Бермуди" +msgid "" +"Please choose the port that your printer is connected to or enter a device " +"name/file name in the input line" +msgstr "" -#: ../../lang.pm:1 +#: ../../standalone/logdrake:1 #, c-format -msgid "Benin" -msgstr "Бен╕н" +msgid "/Options/Test" +msgstr "/Параметри/Тест" -#: ../../lang.pm:1 +#: ../../security/level.pm:1 #, c-format -msgid "Burundi" -msgstr "Бурунд╕" +msgid "" +"This level is to be used with care. It makes your system more easy to use,\n" +"but very sensitive. It must not be used for a machine connected to others\n" +"or to the Internet. There is no password access." +msgstr "" +"Цей р╕вень потр╕бно використовувати з обережн╕стю. В╕н дозволя╓ б╕льш\n" +"просте користування Вашою системою, але ╓ надзвичайно ненад╕йним. Не\n" +"можна користуватися такою системою, коли вона п╕д'╓днана мережею до\n" +"╕нших систем, або до ╕нтернету. Парол╕ не використовуються в ц╕й\n" +"систем╕." -#: ../../lang.pm:1 -#, c-format -msgid "Bahrain" -msgstr "Бахрейн" +#: ../../fs.pm:1 +#, fuzzy, c-format +msgid "Mounting partition %s" +msgstr "Форматування п╕дрозд╕лу %s" -#: ../../lang.pm:1 +#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1 #, c-format -msgid "Bulgaria" -msgstr "Болгар╕я" +msgid "User name" +msgstr "╤м'я користувача" -#: ../../lang.pm:1 +#: ../../network/isdn.pm:1 #, c-format -msgid "Burkina Faso" -msgstr "Бурк╕на Фасо" +msgid "New configuration (isdn-light)" +msgstr "Нова конф╕╜урац╕я (isdn-light)" -#: ../../lang.pm:1 -#, c-format -msgid "Bangladesh" -msgstr "Бангладеш" +#: ../../standalone/drakbug:1 +#, fuzzy, c-format +msgid "Userdrake" +msgstr "Друкарка" -#: ../../lang.pm:1 +#: ../../install_interactive.pm:1 #, c-format -msgid "Barbados" -msgstr "Барбадос" +msgid "Which partition do you want to use for Linux4Win?" +msgstr "Який п╕дрозд╕л ви хочете використати для Linux4Win?" -#: ../../lang.pm:1 -#, c-format -msgid "Bosnia and Herzegovina" -msgstr "Босн╕я та Герцеговина" +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Backup system" +msgstr "Установка файл. систем" -#: ../../lang.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Azerbaijan" -msgstr "Азейбаржан" +msgid "Test pages" +msgstr "Тестую стор╕нки" -#: ../../lang.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Aruba" -msgstr "Аруба" +msgid "" +"List of data to restore:\n" +"\n" +msgstr "" -#: ../../lang.pm:1 ../../standalone/drakxtv:1 +#: ../../fs.pm:1 #, fuzzy, c-format -msgid "Australia" -msgstr "посл╕довний" +msgid "Checking %s" +msgstr "Видалення LPD..." -#: ../../lang.pm:1 +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "TCP/Socket Printer Options" +msgstr "Параметри принтера в мереж╕" + +#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format -msgid "American Samoa" -msgstr "Американська Самоа" +msgid "Card mem (DMA)" +msgstr "Пам'ять картки (DMA)" -#: ../../lang.pm:1 ../../standalone/drakxtv:1 +#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format -msgid "Argentina" -msgstr "Аргентина" +msgid "France" +msgstr "Франц╕я" -#: ../../lang.pm:1 +#: ../../standalone/drakperm:1 #, c-format -msgid "Antarctica" -msgstr "Антарктика" +msgid "browse" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Checking installed software..." +msgstr "Перев╕рка встановленого програмного забезпечення..." + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Remote printer name missing!" +msgstr "В╕дсутня назва принтера!" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Do you want to enable printing on printers in the local network?\n" +msgstr "" +"Встановити принтер \"%s\"\n" +"як стандартний?" #: ../../lang.pm:1 #, c-format -msgid "Angola" -msgstr "Ангола" +msgid "Turkey" +msgstr "Турц╕я" -#: ../../lang.pm:1 -#, c-format -msgid "Netherlands Antilles" -msgstr "Голандськ╕ Антильськ╕ острови" +#: ../../network/adsl.pm:1 +#, fuzzy, c-format +msgid "Alcatel speedtouch usb" +msgstr "speedtouch usb" -#: ../../lang.pm:1 -#, c-format -msgid "Armenia" -msgstr "В╕рмен╕я" +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "Number of buttons" +msgstr "Двох кнопочна" -#: ../../lang.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Albania" -msgstr "Албан╕я" +msgid "Vietnamese \"numeric row\" QWERTY" +msgstr "В'╓тнамська \"цифровий ряд\" QWERTY" -#: ../../lang.pm:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "Anguilla" -msgstr "Анг╕лья" +msgid "Module" +msgstr "Модуль" -#: ../../lang.pm:1 -#, c-format -msgid "Antigua and Barbuda" -msgstr "Антигуа та Барбуда" +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"In addition, queues not created with this program or \"foomatic-configure\" " +"cannot be transferred." +msgstr "" +"Додатково, черги не переносяться ц╕╓ю командою ╕ конф╕╜урац╕я\n" +"\"foomatic-configure\" не може бути перенесена також." -#: ../../lang.pm:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "United Arab Emirates" -msgstr "Об'╓днан╕ Арабськ╕ Ем╕рати" +msgid "Hardware" +msgstr "" -#: ../../lang.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Andorra" -msgstr "Андора" +msgid "Ctrl and Alt keys simultaneously" +msgstr "" -#: ../../lang.pm:1 +#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format -msgid "Afghanistan" -msgstr "Афган╕стан" +msgid "United States" +msgstr "Сполучен╕ штати" -#: ../../lang.pm:1 +#: ../../any.pm:1 #, c-format -msgid "default:LTR" -msgstr "default:LTR" +msgid "Default OS?" +msgstr "Основна система?" -#: ../../loopback.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Circular mounts %s\n" -msgstr "Кругов╕ точки монтування %s\n" +msgid "Swiss (German layout)" +msgstr "Швейцарська (н╕мецька розкладка)" -#: ../../lvm.pm:1 +#: ../../Xconfig/card.pm:1 #, c-format -msgid "Remove the logical volumes first\n" -msgstr "Спочатку з╕тр╕ть лог╕чний том\n" +msgid "Configure all heads independently" +msgstr "Сконф╕╜урувати вс╕ мон╕тори незалежно" -#: ../../modules.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format msgid "" -"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel." +"Please choose the printer you want to set up. The configuration of the " +"printer will work fully automatically. If your printer was not correctly " +"detected or if you prefer a customized printer configuration, turn on " +"\"Manual configuration\"." msgstr "" -#: ../../mouse.pm:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "MOVE YOUR WHEEL!" -msgstr "ПОСУНЬТЕ КОЛ╤ЩАТКО!" +msgid "NTP Server" +msgstr "Сервер NTP" -#: ../../mouse.pm:1 +#: ../../install_steps_gtk.pm:1 #, c-format -msgid "To activate the mouse," -msgstr "Щоб актив╕зувати мишку, " +msgid "Load/Save on floppy" +msgstr "Прочитати/записати з/на дискету" -#: ../../mouse.pm:1 +#: ../../standalone/draksplash:1 #, c-format -msgid "Please test the mouse" -msgstr "Випробуйте мишку, будь-ласка" +msgid "This theme does not yet have a bootsplash in %s !" +msgstr "" -#: ../../mouse.pm:1 +#: ../../pkgs.pm:1 #, c-format -msgid "No mouse" -msgstr "Без мишки" +msgid "nice" +msgstr "гарно" -#: ../../mouse.pm:1 -#, c-format -msgid "none" -msgstr "Н╕чого" +#: ../../Xconfig/test.pm:1 +#, fuzzy, c-format +msgid "Leaving in %d seconds" +msgstr "%d секунд" -#: ../../mouse.pm:1 +#: ../../network/modem.pm:1 #, c-format -msgid "3 buttons" -msgstr "Трьох кнопочна" +msgid "Please choose which serial port your modem is connected to." +msgstr "Вибер╕ть до якого посл╕довного порта п╕дключений Ваш модем?" -#: ../../mouse.pm:1 -#, c-format -msgid "2 buttons" -msgstr "Двох кнопочна" +#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Country" +msgstr "Кра╖на:" -#: ../../mouse.pm:1 -#, c-format -msgid "1 button" -msgstr "Одно кнопочна" +#: ../../standalone/drakperm:1 +#, fuzzy, c-format +msgid "Property" +msgstr "Порт" -#: ../../mouse.pm:1 +#: ../../standalone/drakfont:1 #, c-format -msgid "busmouse" -msgstr "busmouse" +msgid "Ghostscript" +msgstr "" -#: ../../mouse.pm:1 +#: ../../standalone/drakconnect:1 #, c-format -msgid "Kensington Thinking Mouse" -msgstr "Kensington Thinking Mouse" +msgid "LAN Configuration" +msgstr "Конф╕╜урац╕я локально╖ мереж╕" -#: ../../mouse.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Logitech Mouse (serial, old C7 type)" -msgstr "Logitech Mouse (serial, тип C7)" +msgid "Ghana" +msgstr "╫ана" -#: ../../mouse.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "MM HitTablet" -msgstr "MM HitTablet" +msgid "Path or Module required" +msgstr "" -#: ../../mouse.pm:1 +#: ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "Advanced Options" +msgstr "Конф╕╜урац╕я локально╖ мереж╕" + +#: ../../standalone/harddrake2:1 #, c-format -msgid "MM Series" -msgstr "Типу MM" +msgid "Coma bug" +msgstr "" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"At this point, you need to choose which partition(s) will be used for the\n" +"installation of your Mandrake Linux system. If partitions have already been\n" +"defined, either from a previous installation of GNU/Linux or by another\n" +"partitioning tool, you can use existing partitions. Otherwise, hard drive\n" +"partitions must be defined.\n" +"\n" +"To create partitions, you must first select a hard drive. You can select\n" +"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" +"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" +"\n" +"To partition the selected hard drive, you can use these options:\n" +"\n" +" * \"%s\": this option deletes all partitions on the selected hard drive\n" +"\n" +" * \"%s\": this option enables you to automatically create ext3 and swap\n" +"partitions in the free space of your hard drive\n" +"\n" +"\"%s\": gives access to additional features:\n" +"\n" +" * \"%s\": saves the partition table to a floppy. Useful for later\n" +"partition-table recovery if necessary. It is strongly recommended that you\n" +"perform this step.\n" +"\n" +" * \"%s\": allows you to restore a previously saved partition table from a\n" +"floppy disk.\n" +"\n" +" * \"%s\": if your partition table is damaged, you can try to recover it\n" +"using this option. Please be careful and remember that it doesn't always\n" +"work.\n" +"\n" +" * \"%s\": discards all changes and reloads the partition table that was\n" +"originally on the hard drive.\n" +"\n" +" * \"%s\": unchecking this option will force users to manually mount and\n" +"unmount removable media such as floppies and CD-ROMs.\n" +"\n" +" * \"%s\": use this option if you wish to use a wizard to partition your\n" +"hard drive. This is recommended if you do not have a good understanding of\n" +"partitioning.\n" +"\n" +" * \"%s\": use this option to cancel your changes.\n" +"\n" +" * \"%s\": allows additional actions on partitions (type, options, format)\n" +"and gives more information about the hard drive.\n" +"\n" +" * \"%s\": when you are finished partitioning your hard drive, this will\n" +"save your changes back to disk.\n" +"\n" +"When defining the size of a partition, you can finely set the partition\n" +"size by using the Arrow keys of your keyboard.\n" +"\n" +"Note: you can reach any option using the keyboard. Navigate through the\n" +"partitions using [Tab] and the [Up/Down] arrows.\n" +"\n" +"When a partition is selected, you can use:\n" +"\n" +" * Ctrl-c to create a new partition (when an empty partition is selected)\n" +"\n" +" * Ctrl-d to delete a partition\n" +"\n" +" * Ctrl-m to set the mount point\n" +"\n" +"To get information about the different file system types available, please\n" +"read the ext2FS chapter from the ``Reference Manual''.\n" +"\n" +"If you are installing on a PPC machine, you will want to create a small HFS\n" +"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" +"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" +"may find it a useful place to store a spare kernel and ramdisk images for\n" +"emergency boot situations." +msgstr "" +"Зараз Вам потр╕бно вибрати, як╕ п╕дрозд╕ли використовувати для Вашо╖\n" +"ново╖ системи Л╕накс Мандрейк. Якщо ц╕ п╕дрозд╕ли вже були визначен╕\n" +"(в╕д попередньо╖ установки системи GNU/Linux або створен╕ ╕ншою\n" +"програмою розпод╕лу диску), ви можете скористатися вже готовими\n" +"п╕дрозд╕лами. В ╕ншому випадку, п╕дрозд╕ли на жорсткому диску мають\n" +"бути визначеними перш, н╕ж переходити до установки.\n" +"\n" +"Для створення п╕дрозд╕л╕в ви спершу ма╓те вибрати жорсткий диск. Ви\n" +"можете вибрати диск клацнувши на \"hda\" (якщо мова йде про перший диск\n" +"типи IDE), або на \"hdb\" (для другого диску в систем╕ типу IDE), або на\n" +"\"sda\", якщо ви будете встановлювати систему на першому диску типу SCSI\n" +"╕ так дал╕.\n" +"\n" +"Щоб розпод╕лити диск на розд╕ли, ви можете скористатися цими пунктами меню:\n" +"\n" +"* Очистити все: цей пункт стира╓ вс╕ п╕дрозд╕ли на вибраному жорсткому " +"диску.\n" +"\n" +"* Розпод╕лити автоматично: цей пункт меню допоможе Вам автоматично\n" +"створити п╕дрозд╕л типу Ext2 та swap на в╕льному простор╕ диску.\n" +"\n" +"* В╕дновити таблицю п╕дрозд╕л╕в: якщо таблиця п╕дрозд╕л╕в Вашого диску\n" +"з╕псована, ви можете спершу спробувати в╕дновити ╖╖ скористувавшись\n" +"цим пунктом. Будь-ласка, будьте-обережними, ╕ пам'ятайте, що цей пункт\n" +"не завжди спрацьову╓.\n" +"\n" +"* Повернутись: Можете скористуватись цим, щоб в╕дмовитись в╕д зм╕н,\n" +"внесених вами.\n" +"\n" +"* Перечитати: Можете скористуватись цим, щоб в╕дмовитись в╕д зм╕н,\n" +"внесених вами ╕ перепрочитати ори╜╕нальну таблицю п╕дрозд╕л╕в.\n" +"\n" +"\n" +"* Пом╕чник: Якщо ви хочете скористатись пом╕чником для розпод╕лу\n" +"диску. Рекомендований режим, якщо ви не ма╓те глибоких знань про\n" +"розпод╕л диску. \n" +"\n" +"* В╕дновити з гнучкого диску: Якщо ви записали попередньо свою таблицю\n" +"п╕дрозд╕л╕в на гнучкий диск. Зараз ви можете в╕дновити цю таблицю з\n" +"гнучкого диску.\n" +"\n" +"* Записати на гнучкий диск: Якщо ви хочете записати зараз таблицю\n" +"п╕дрозд╕л╕в на гнучкий диск для того, щоб ╖╖ пот╕м можна було\n" +"в╕дновити з дискети. Дуже рекоменду╓мо скористуватися цим режимом. \n" +"\n" +"* Готово: П╕сля того, як ви вже зак╕нчили з перерозпод╕лом Вашого\n" +"жорсткого диску, скористайтесь цим пунктом, щоб записати зм╕ни на\n" +"диск. \n" +"\n" +"Коли певний п╕дрозд╕л вибрано, можете скористуватись клав╕шами:\n" +"\n" +" * Ctrl-c щоб створити новий п╕дрозд╕л (якщо вибрано пустий " +"п╕дрозд╕л)\n" +"\n" +" * Ctrl-d щоб стерти п╕дрозд╕л\n" +"\n" +" * Ctrl-m щоб визначити точку монтування\n" +"\n" +"Якщо ви встановлю╓те систему на комп'ютер з процесором PPC, ви можете\n" +"створити маленький п╕дрозд╕л типу HFS для завантаження 'bootstrap'\n" +"(розм╕ром не менше 1Мб для завантажувача yaboot. Якщо ви вир╕шите\n" +"створити п╕дрозд╕л трохи б╕льшого розм╕ру (скаж╕мо 50Мб, ви зможете\n" +"також збер╕гати на ньому резервне ядро системи та в╕ртуальний диск для\n" +"авар╕йних завантажень системи). " -#: ../../mouse.pm:1 +#: ../../help.pm:1 #, c-format -msgid "Genius NetMouse" -msgstr "Genius NetMouse" +msgid "" +"Graphic Card\n" +"\n" +" The installer will normally automatically detect and configure the\n" +"graphic card installed on your machine. If it is not the case, you can\n" +"choose from this list the card you actually have installed.\n" +"\n" +" In the case that different servers are available for your card, with or\n" +"without 3D acceleration, you are then asked to choose the server that best\n" +"suits your needs." +msgstr "" -#: ../../mouse.pm:1 +#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format -msgid "Logitech MouseMan+/FirstMouse+" -msgstr "Logitech MouseMan+/FirstMouse+" +msgid "There was an error installing packages:" +msgstr "Сталася помилка п╕д час установки пакет╕в: " -#: ../../mouse.pm:1 -#, c-format -msgid "Logitech CC Series" -msgstr "Типу Logitech CC" +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Lexmark inkjet configuration" +msgstr "Конф╕гурац╕я ╕нтернету" -#: ../../mouse.pm:1 +#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format -msgid "Mouse Systems" -msgstr "Mouse Systems" +msgid "Undo" +msgstr "Назад" -#: ../../mouse.pm:1 +#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format -msgid "Logitech MouseMan" -msgstr "Logitech MouseMan" +msgid "Save partition table" +msgstr "Записати таблицю п╕дрозд╕л╕в" -#: ../../mouse.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Microsoft IntelliMouse" -msgstr "Microsoft IntelliMouse" +msgid "Finnish" +msgstr "Ф╕нська" -#: ../../mouse.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Generic 3 Button Mouse" -msgstr "Звичайна 3х кнопочна мишка" +msgid "Macedonia" +msgstr "Македон╕я" -#: ../../mouse.pm:1 +#: ../../any.pm:1 #, c-format -msgid "Generic 2 Button Mouse" -msgstr "Звичайна 2х кнопочна мишка" +msgid "" +"The per-user sharing uses the group \"fileshare\". \n" +"You can use userdrake to add a user to this group." +msgstr "" -#: ../../mouse.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "serial" -msgstr "посл╕довний" +msgid "Slovenian" +msgstr "Словенська" -#: ../../mouse.pm:1 +#: ../../lang.pm:1 #, fuzzy, c-format -msgid "Microsoft Explorer" -msgstr "Microsoft IntelliMouse" - -#: ../../mouse.pm:1 -#, c-format -msgid "Wheel" -msgstr "Кол╕щатко" - -#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1 -#, c-format -msgid "Generic" -msgstr "Загальне" - -#: ../../mouse.pm:1 -#, c-format -msgid "Genius NetScroll" -msgstr "Genius NetScroll" - -#: ../../mouse.pm:1 -#, c-format -msgid "GlidePoint" -msgstr "GlidePoint" - -#: ../../mouse.pm:1 -#, c-format -msgid "Generic PS2 Wheel Mouse" -msgstr "Звичайний тип PS2 миш╕ з кол╕щатком" +msgid "Libya" +msgstr "Л╕бер╕я" -#: ../../mouse.pm:1 +#: ../../standalone/drakgw:1 #, c-format -msgid "Logitech MouseMan+" -msgstr "Logitech MouseMan+" +msgid "Configuring scripts, installing software, starting servers..." +msgstr "Конф╕╜урац╕я скрипт╕в, установка програм, стартування сервер╕в..." -#: ../../mouse.pm:1 ../../security/level.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Standard" -msgstr "Стандартний" +msgid "" +"\n" +"- Burn to CD" +msgstr "" -#: ../../mouse.pm:1 +#: ../../any.pm:1 #, c-format -msgid "Sun - Mouse" -msgstr "Миша Sun" +msgid "Table" +msgstr "Таблиця" -#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 +#: ../../fs.pm:1 #, c-format -msgid "Toggle between flat and group sorted" -msgstr "Перемикнути м╕ж показом по групам ╕ звичайним списком" +msgid "I don't know how to format %s in type %s" +msgstr "Не знаю як форматувати %s типу %s" -#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 -#, c-format -msgid "Collapse Tree" -msgstr "Стиснути дерево" +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "Model" +msgstr "Модуль" -#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 +#: ../../security/help.pm:1 #, c-format -msgid "Expand Tree" -msgstr "Розширити дерево" +msgid "" +"Arguments: (arg)\n" +"\n" +"Enable/Disable libsafe if libsafe is found on the system." +msgstr "" -#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1 -#, c-format -msgid "Info" -msgstr "╤нформац╕я" +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "Stop Server" +msgstr "Сервер NIS" -#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 +#: ../../standalone/drakboot:1 #, c-format -msgid "Is this correct?" -msgstr "Все в╕рно?" +msgid "" +"\n" +"Select the theme for\n" +"lilo and bootsplash,\n" +"you can choose\n" +"them separately" +msgstr "" -#: ../../my_gtk.pm:1 +#: ../../harddrake/data.pm:1 #, fuzzy, c-format -msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*" -msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" +msgid "Modem" +msgstr "Модуль" -#: ../../partition_table.pm:1 +#: ../../security/help.pm:1 #, c-format -msgid "Error writing to file %s" -msgstr "Помилка при запис╕ у файл %s" +msgid "" +"Arguments: (arg, listen_tcp=None)\n" +"\n" +"Allow/Forbid X connections. First arg specifies what is done\n" +"on the client side: ALL (all connections are allowed), LOCAL (only\n" +"local connection) and NONE (no connection)." +msgstr "" -#: ../../partition_table.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Bad backup file" -msgstr "Поганий резервний файл" +msgid "Tuvalu" +msgstr "Тувалу" -#: ../../partition_table.pm:1 +#: ../../help.pm:1 ../../network/netconnect.pm:1 #, c-format -msgid "Restoring from file %s failed: %s" -msgstr "В╕дновлення з файлу %s не спрацювало: %s" +msgid "Use auto detection" +msgstr "Користуватися автовизначенням" -#: ../../partition_table.pm:1 +#: ../../services.pm:1 #, c-format msgid "" -"You have a hole in your partition table but I can't use it.\n" -"The only solution is to move your primary partitions to have the hole next " -"to the extended partitions." +"GPM adds mouse support to text-based Linux applications such the\n" +"Midnight Commander. It also allows mouse-based console cut-and-paste " +"operations,\n" +"and includes support for pop-up menus on the console." msgstr "" -"У Вас ╓ пром╕жок в таблиц╕ розд╕л╕в, але я не можу ним скористуватися.\n" -"╢диним р╕шенням може бути пересунути Ваш╕ основн╕ п╕дрозд╕ли так, щоб\n" -"пром╕жок був поруч з розширеними п╕дрозд╕лами." - -#: ../../partition_table.pm:1 -#, c-format -msgid "Extended partition not supported on this platform" -msgstr "Розширен╕ п╕дрозд╕ли не п╕дтримуються на ц╕й платформ╕." +"GPM дода╓ п╕дтримку мишки до текстових програм у Л╕накс╕, таких як,\n" +"наприклад, Midnight Commander. Дода╓ також можливост╕ \"cut-and-paste\"\n" +"до програм, що працюють на консол╕, включаючи п╕дтримку меню на\n" +"консол╕." -#: ../../partition_table.pm:1 +#: ../../standalone/drakconnect:1 #, c-format -msgid "mount failed: " -msgstr "помилка монтування: " +msgid "Started on boot" +msgstr "Стартувати при завантаженн╕" -#: ../../pkgs.pm:1 +#: ../../share/advertising/12-mdkexpert.pl:1 #, c-format -msgid "maybe" -msgstr "можливо" +msgid "" +"Join the MandrakeSoft support teams and the Linux Community online to share " +"your knowledge and help others by becoming a recognized Expert on the online " +"technical support website:" +msgstr "" -#: ../../pkgs.pm:1 +#: ../../standalone/draksec:1 #, c-format -msgid "nice" -msgstr "гарно" +msgid "" +"The following options can be set to customize your\n" +"system security. If you need an explanation, look at the help tooltip.\n" +msgstr "" -#: ../../pkgs.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "very nice" -msgstr "дуже гарний" +msgid "Automatically find available printers on remote machines" +msgstr "" -#: ../../pkgs.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "important" -msgstr "важливий" +msgid "" +"\n" +"- Save to Tape on device: %s" +msgstr "" -#: ../../pkgs.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "must have" -msgstr "потр╕бний" +msgid "East Timor" +msgstr "Сх╕дний Т╕мор" -#: ../../raid.pm:1 +#: ../../standalone/drakconnect:1 #, c-format -msgid "Not enough partitions for RAID level %d\n" -msgstr "Недостатньо п╕дрозд╕л╕в для RAID р╕вня %d\n" +msgid "Del profile..." +msgstr "Стерти проф╕ль..." -#: ../../raid.pm:1 +#: ../../security/help.pm:1 #, c-format -msgid "mkraid failed" -msgstr "зб╕й у mkraid" +msgid "" +"Arguments: (arg)\n" +"\n" +"Allow/Forbid the list of users on the system on display managers (kdm and " +"gdm)." +msgstr "" -#: ../../raid.pm:1 -#, c-format -msgid "mkraid failed (maybe raidtools are missing?)" -msgstr "зб╕й у mkraid (можливо не встановлен╕ raidtools?)" +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Installing Foomatic..." +msgstr "Установка пакету %s" -#: ../../raid.pm:1 +#: ../../standalone/XFdrake:1 #, c-format -msgid "Can't add a partition to _formatted_ RAID md%d" -msgstr "Не можу додати п╕дрозд╕л до _форматованого_ RAID md%d" +msgid "Please log out and then use Ctrl-Alt-BackSpace" +msgstr "" +"Будь-ласка, вийд╕ть ╕з системи ╕ пот╕м скористуйтеся Ctrl-Alt-BackSpace" -#: ../../services.pm:1 +#: ../../network/netconnect.pm:1 #, fuzzy, c-format -msgid "Stop" -msgstr "Сектор" +msgid "detected" +msgstr "знайдено %s" -#: ../../services.pm:1 +#: ../../network/netconnect.pm:1 #, fuzzy, c-format -msgid "Start" -msgstr "Статус" +msgid "The network needs to be restarted. Do you want to restart it ?" +msgstr "Як╕ пакети Ви хочете встановити?" -#: ../../services.pm:1 -#, c-format -msgid "On boot" -msgstr "При завантаженн╕" +#: ../../standalone/drakbug:1 +#, fuzzy, c-format +msgid "Package: " +msgstr "Виб╕р пакет╕в" -#: ../../services.pm:1 +#: ../../standalone/drakboot:1 #, c-format -msgid "" -"No additional information\n" -"about this service, sorry." +msgid "Can't write /etc/sysconfig/bootsplash." msgstr "" -"Вибачте, нема╓ додатково╖ \n" -"╕нформац╕╖ про цей серв╕с." -#: ../../services.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Services and deamons" -msgstr "Серв╕си та демони" +msgid "SECURITY WARNING!" +msgstr "" -#: ../../services.pm:1 -#, c-format -msgid "stopped" -msgstr "зупинено" +#: ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "StarOffice" +msgstr "Оф╕сна станц╕я" -#: ../../services.pm:1 +#: ../../standalone/drakboot:1 #, c-format -msgid "running" -msgstr "працюю" +msgid "No, I don't want autologin" +msgstr "Н╕, мен╕ не потр╕бна автоматична ре╓страц╕я" -#: ../../services.pm:1 +#: ../../standalone/drakbug:1 #, c-format -msgid "Choose which services should be automatically started at boot time" +msgid "Windows Migration tool" msgstr "" -"Вибер╕ть, як╕ серв╕си мають стартувати автоматично при завантаженн╕ системи" -#: ../../services.pm:1 +#: ../../any.pm:1 ../../help.pm:1 #, fuzzy, c-format -msgid "Database Server" -msgstr "База даних" +msgid "All languages" +msgstr "Вибер╕ть мову" -#: ../../services.pm:1 +#: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format -msgid "Remote Administration" -msgstr "Опц╕╖ в╕ддаленого принтера" - -#: ../../services.pm:1 -#, c-format -msgid "File sharing" -msgstr "" +msgid "Removing %s" +msgstr "Видалення LPD..." -#: ../../services.pm:1 +#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format -msgid "Internet" -msgstr "╤нтернет" +msgid "Testing your connection..." +msgstr "Випробування з'╓днання..." -#: ../../services.pm:1 +#: ../../standalone/harddrake2:1 #, fuzzy, c-format -msgid "Printing" -msgstr "Друк" - -#: ../../services.pm:1 -#, c-format -msgid "Starts the X Font Server (this is mandatory for XFree to run)." -msgstr "" -"Старту╓ та зупиня╓ сервер шрифт╕в для X (обов'язкове для роботи\n" -"сервера XFree)." - -#: ../../services.pm:1 -#, c-format -msgid "Load the drivers for your usb devices." -msgstr "Завантажити драйвери для пристро╖в usb." +msgid "Cache size" +msgstr "розм╕р д╕лянки" -#: ../../services.pm:1 +#: ../../security/level.pm:1 #, c-format msgid "" -"Syslog is the facility by which many daemons use to log messages\n" -"to various system log files. It is a good idea to always run syslog." +"Passwords are now enabled, but use as a networked computer is still not " +"recommended." msgstr "" -"syslog - це серв╕с в систем╕, за допомогою якого демони записують\n" -"системн╕ пов╕домлення у р╕зн╕ системн╕ файли ре╓страц╕╖ пов╕домлень. В\n" -"будь-як╕й систем╕ непогано мати syslog." +"Парол╕ тепер вмикнен╕, але все одно не рекоменду╓ться користуватися\n" +"цим комп'ютером в мереж╕." -#: ../../services.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Launch the sound system on your machine" -msgstr "Запуск звуково╖ системи на ваш╕й машин╕" +msgid "Start sector: " +msgstr "Початок (сектор): " -#: ../../services.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "" -"The rwho protocol lets remote users get a list of all of the users\n" -"logged into a machine running the rwho daemon (similiar to finger)." +msgid "Congo (Brazzaville)" msgstr "" -"Протокол rwho вида╓ користувачам на в╕ддалених системах ╕нформац╕ю про\n" -"вс╕х користувач╕в заре╓строваних в систем╕, яка ма╓ демон rwho\n" -"(под╕бний до демона finger)." -#: ../../services.pm:1 -#, c-format -msgid "" -"The rusers protocol allows users on a network to identify who is\n" -"logged in on other responding machines." -msgstr "" -"Протокол rusers да╓ можлив╕сть користувачам в мереж╕ отримувати\n" -"╕нформац╕ю про те, хто з користувач╕в заре╓стрований на системах, що\n" -"в╕дпов╕дають на запити." +#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1 +#, fuzzy, c-format +msgid "The package %s needs to be installed. Do you want to install it?" +msgstr "Як╕ пакети Ви хочете встановити?" -#: ../../services.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "" -"The rstat protocol allows users on a network to retrieve\n" -"performance metrics for any machine on that network." -msgstr "" -"Протокол rstat да╓ можлив╕сть користувачам в мереж╕ отримувати дан╕\n" -"про завантання будь-якого комп'ютера в ц╕й мереж╕." +msgid "Seychelles" +msgstr "Сейшельськ╕ острови" -#: ../../services.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format msgid "" -"The routed daemon allows for automatic IP router table updated via\n" -"the RIP protocol. While RIP is widely used on small networks, more complex\n" -"routing protocols are needed for complex networks." +"Printerdrake has compared the model name resulting from the printer auto-" +"detection with the models listed in its printer database to find the best " +"match. This choice can be wrong, especially when your printer is not listed " +"at all in the database. So check whether the choice is correct and click " +"\"The model is correct\" if so and if not, click \"Select model manually\" " +"so that you can choose your printer model manually on the next screen.\n" +"\n" +"For your printer Printerdrake has found:\n" +"\n" +"%s" msgstr "" -"Демон routed да╓ можлив╕сть користуватися автоматичним поновленням\n" -"таблиц╕ маршрутизац╕╖ IP за допомогою протокола RIP. Протокол RIP\n" -"широко використову╓ться на невеликих мережах, в той час, як на б╕льш\n" -"складних необх╕дне застосування б╕льш розвинених протокол╕в\n" -"маршрутизац╕╖." -#: ../../services.pm:1 +#: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "" -"Assign raw devices to block devices (such as hard drive\n" -"partitions), for the use of applications such as Oracle or DVD players" -msgstr "" -"Поставити \"сир╕\" файли спец╕альних пристро╖в у в╕дпов╕дн╕сть до\n" -"блочних пристро╖в (як, наприклад, п╕дрозд╕ли жорсткого диску) для\n" -"використання в програмах под╕бних до Oracle." +msgid "Bad password on %s" +msgstr "Без паролю" -#: ../../services.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format msgid "" -"Saves and restores system entropy pool for higher quality random\n" -"number generation." +"\n" +"There is one unknown printer directly connected to your system" msgstr "" -"Збер╕га╓ ╕ в╕дновлю╓ джерело ентроп╕╖ в систем╕, тим самим п╕двищуючи\n" -"як╕сть ╜енерац╕╖ випадкових чисел." -#: ../../services.pm:1 -#, fuzzy, c-format -msgid "" -"Postfix is a Mail Transport Agent, which is the program that moves mail from " -"one machine to another." +#: ../../lang.pm:1 +#, c-format +msgid "Zambia" +msgstr "Замб╕я" + +#: ../../security/level.pm:1 +#, c-format +msgid "Security Administrator (login or email)" msgstr "" -"Postfix - це програма для передач╕ електронно╖ пошти (Mail Transport\n" -"Agent), яка переда╓ поштов╕ пов╕домлення в╕д одного комп'ютера до\n" -"╕ншого." -#: ../../services.pm:1 +#: ../../standalone/drakgw:1 #, c-format -msgid "" -"The portmapper manages RPC connections, which are used by\n" -"protocols such as NFS and NIS. The portmap server must be running on " -"machines\n" -"which act as servers for protocols which make use of the RPC mechanism." +msgid "Sorry, we support only 2.4 kernels." msgstr "" -"portmapper керу╓ з'╓днаннями з протоколом RPC, як╕ використовуються\n" -"такими протоколами, як NFS та NIS. portmaper повинен працювати на\n" -"машинах, як╕ ╓ серверами для протокол╕в, що користуються RPC." -#: ../../services.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "" -"PCMCIA support is usually to support things like ethernet and\n" -"modems in laptops. It won't get started unless configured so it is safe to " -"have\n" -"it installed on machines that don't need it." +msgid "Romanian (qwerty)" +msgstr "Румунська (qwerty)" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Under Devel ... please wait." msgstr "" -"PCMCIA п╕дтримка потр╕бна в основному для забезпечення роботи таких\n" -"речей, як ethernet та модем в переносних комп'ютерах. Пакет не почне\n" -"працювати, якщо його не сконф╕╜уровано. Отже, його безпечно\n" -"встановлювати на комп'ютерах, нав╕ть якщо в╕н не буде\n" -"використовуватися." -#: ../../services.pm:1 +#: ../../crypto.pm:1 ../../lang.pm:1 #, c-format -msgid "Support the OKI 4w and compatible winprinters." -msgstr "П╕дтримка для OKI 4w ╕ под╕бних win принтер╕в." +msgid "Czech Republic" +msgstr "Чешська республ╕ка" -#: ../../services.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "" -"Automatically switch on numlock key locker under console\n" -"and XFree at boot." -msgstr "" -"Автоматично включити NumLock на консол╕ ╕ в XFree \n" -"при завантаженн╕" +msgid "Egypt" +msgstr "╢╜ипт" -#: ../../services.pm:1 +#: ../../network/isdn.pm:1 #, c-format -msgid "" -"NFS is a popular protocol for file sharing across TCP/IP\n" -"networks. This service provides NFS file locking functionality." -msgstr "" -"NFS - це дуже популярний протокол для сп╕льного використання файл╕в на\n" -"комп'ютерах, з'╓днаних мережею TCP/IP. Цей серв╕с забезпечу╓\n" -"можлив╕сть користування замиканням файл╕в." +msgid "Old configuration (isdn4net)" +msgstr "Стара конф╕╜урац╕я (isdn4net)" -#: ../../services.pm:1 +#: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format +msgid "Sound card" +msgstr "Звукова плата" + +#: ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "Import Fonts" +msgstr "Форматувати п╕дрозд╕ли" + +#: ../../diskdrake/hd_gtk.pm:1 +#, fuzzy, c-format msgid "" -"NFS is a popular protocol for file sharing across TCP/IP networks.\n" -"This service provides NFS server functionality, which is configured via the\n" -"/etc/exports file." +"You have one big MicroSoft Windows partition.\n" +"I suggest you first resize that partition\n" +"(click on it, then click on \"Resize\")" msgstr "" -"NFS - це дуже популярний протокол для сп╕льного використання файл╕в на\n" -"комп'ютерах, з'╓днаних мережею TCP/IP. Цей серв╕с забезпечу╓ NFS\n" -"сервер, який конф╕╜уру╓ться за допомогою файла /etc/exports." +"ви ма╓те один великий дисковий \n" +"п╕дрозд╕л типу FAT (який в основному\n" +"використову╓ться системами MicroSoft \n" +"Dos/Windows). Рекомендовано спершу \n" +"зменшити розм╕р цього розд╕лу (клацн╕ть \n" +"на ньому, ╕ пот╕м клацн╕ть на \"Зм╕нити розм╕р\")" -#: ../../services.pm:1 +#: ../../standalone/drakfont:1 #, c-format -msgid "" -"Activates/Deactivates all network interfaces configured to start\n" -"at boot time." +msgid "Suppress Temporary Files" msgstr "" -"Актив╕зу╓ та деактив╕зу╓ вс╕ ╕нтерфейси мереж╕, як╕ настро╓н╕\n" -"стартувати при завантаженн╕ системи." -#: ../../services.pm:1 +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Change partition type" +msgstr "Зм╕нити тип п╕дрозд╕лу" + +#: ../../help.pm:1 #, c-format msgid "" -"Mounts and unmounts all Network File System (NFS), SMB (Lan\n" -"Manager/Windows), and NCP (NetWare) mount points." +"Resolution\n" +"\n" +" Here you can choose the resolutions and color depths available for your\n" +"hardware. Choose the one that best suits your needs (you will be able to\n" +"change that after installation though). A sample of the chosen\n" +"configuration is shown in the monitor." msgstr "" -"Монту╓ та розмонтову╓ вс╕ файлов╕ системи типу Network File System\n" -"(NFS), SMB (Lan Manager/Windows) та NCP (NetWare)." -#: ../../services.pm:1 +#: ../../standalone/draksec:1 #, fuzzy, c-format -msgid "" -"named (BIND) is a Domain Name Server (DNS) that is used to resolve host " -"names to IP addresses." -msgstr "" -"named (BIND) - це Сервер Назв Домен╕в (Domain Name Server, DNS), який\n" -"служить для визначення назв хост╕в за IP адресами та навпаки." +msgid "Network Options" +msgstr "Опц╕╖ модуля:" -#: ../../services.pm:1 +#: ../../standalone/drakboot:1 #, c-format msgid "" -"Linux Virtual Server, used to build a high-performance and highly\n" -"available server." +"Display theme\n" +"under console" msgstr "" -"Linux Virtual Server використову╓ться для побудови високонад╕йного\n" -"сервера з високою продуктивн╕стю." -#: ../../services.pm:1 +#: ../../standalone/net_monitor:1 #, c-format -msgid "" -"lpd is the print daemon required for lpr to work properly. It is\n" -"basically a server that arbitrates print jobs to printer(s)." +msgid "Statistics" msgstr "" -"lpd - це демон друку, який забезпечу╓ роботу lpr. Фактично в╕н ╓\n" -"сервером, який надсила╓ роботу для друкування на принтер╕." -#: ../../services.pm:1 +#: ../../printer/cups.pm:1 #, c-format -msgid "" -"Linuxconf will sometimes arrange to perform various tasks\n" -"at boot-time to maintain the system configuration." -msgstr "" -"Linuxconf у деяких випадках буде виконувати певн╕ процедури п╕д час\n" -"завантаження системи щоб забезпечити п╕дтримання ц╕л╕сност╕\n" -"конф╕╜урац╕╖ системи." +msgid "(on %s)" +msgstr "(на %s)" -#: ../../services.pm:1 +#: ../../mouse.pm:1 #, c-format -msgid "Automatic detection and configuration of hardware at boot." -msgstr "" -"Автоматичне визначення та конф╕╜урування апаратного забезпечення при\n" -"завантаженн╕." +msgid "MM Series" +msgstr "Типу MM" -#: ../../services.pm:1 +#: ../../security/level.pm:1 #, c-format msgid "" -"Automatic regeneration of kernel header in /boot for\n" -"/usr/include/linux/{autoconf,version}.h" +"A library which defends against buffer overflow and format string attacks." msgstr "" -"Автоматичне створення файл╕в заголовк╕в для ядра в каталоз╕ /boot для\n" -"/usr/include/linux/{autoconf,version}.h" -#: ../../services.pm:1 +#: ../../standalone/net_monitor:1 #, c-format -msgid "" -"This package loads the selected keyboard map as set in\n" -"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" -"You should leave this enabled for most machines." +msgid "average" msgstr "" -"Цей пакет завантажу╓ вибрану розкладку клав╕атури, яка встановлю╓ться\n" -"в /etc/sysconfig/keyboard. Ця клав╕атура може бути вибрана за\n" -"допомогою програми kbdconfig. Краще залишити цей пакет працюючим на\n" -"б╕льшост╕ систем." -#: ../../services.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "" -"Launch packet filtering for Linux kernel 2.2 series, to set\n" -"up a firewall to protect your machine from network attacks." -msgstr "" -"Запуска╓ механ╕зм ф╕льтрування пакет╕в для ядра 2.2 Л╕накса, для того\n" -"щоб мати захист типу firewall на ваш╕й систем╕." +msgid "New printer name" +msgstr "Нова назва принтера" -#: ../../services.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "" -"The internet superserver daemon (commonly called inetd) starts a\n" -"variety of other internet services as needed. It is responsible for " -"starting\n" -"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " -"disables\n" -"all of the services it is responsible for." -msgstr "" -"Суперсервер демон (б╕льш в╕домий п╕д назвою inetd) служить для запуску\n" -"р╕зноман╕тних серв╕с╕в ╤нтернету, коли це необх╕дно. В╕н\n" -"в╕дпов╕дальний за старт багатьох серв╕с╕в, таких як telnet, ftp, rsh,\n" -"та rlogin. При непрацюючому сервер╕ inetd не будуть також працювати\n" -"вс╕ ╕нш╕ серв╕си." +msgid "Equatorial Guinea" +msgstr "Екватор╕альна Гв╕нея" -#: ../../services.pm:1 +#: ../../security/help.pm:1 #, c-format msgid "" -"Apache is a World Wide Web server. It is used to serve HTML files and CGI." +"Arguments: (arg)\n" +"\n" +"Allow/Forbid autologin." msgstr "" -"Apache - це сервер для World Wide Web. В╕н використову╓ться для надання " -"серв╕с╕в\n" -"для файл╕в HTML та CGI." -#: ../../services.pm:1 +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Build Backup" +msgstr "Поганий резервний файл" + +#: ../../printer/printerdrake.pm:1 #, c-format msgid "" -"HardDrake runs a hardware probe, and optionally configures\n" -"new/changed hardware." +"To print a file from the command line (terminal window) use the command \"%s " +"\" or \"%s \".\n" msgstr "" -"HardDrake викону╓ тестування апаратного забезпечення ╕ якщо потр╕бно\n" -"конф╕╜уру╓ нове або зм╕нене апаратне забезпечення." -#: ../../services.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "" -"GPM adds mouse support to text-based Linux applications such the\n" -"Midnight Commander. It also allows mouse-based console cut-and-paste " -"operations,\n" -"and includes support for pop-up menus on the console." +msgid "Currently, no alternative possibility is available" msgstr "" -"GPM дода╓ п╕дтримку мишки до текстових програм у Л╕накс╕, таких як,\n" -"наприклад, Midnight Commander. Дода╓ також можливост╕ \"cut-and-paste\"\n" -"до програм, що працюють на консол╕, включаючи п╕дтримку меню на\n" -"консол╕." + +#: ../../keyboard.pm:1 +#, c-format +msgid "Romanian (qwertz)" +msgstr "Румунська (qwertz)" + +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "Write Config" +msgstr "перенастро╖ти" #: ../../services.pm:1 #, c-format msgid "" -"cron is a standard UNIX program that runs user-specified programs\n" -"at periodic scheduled times. vixie cron adds a number of features to the " -"basic\n" -"UNIX cron, including better security and more powerful configuration options." +"The routed daemon allows for automatic IP router table updated via\n" +"the RIP protocol. While RIP is widely used on small networks, more complex\n" +"routing protocols are needed for complex networks." msgstr "" -"cron - це стандартна програма UNIX, яка викону╓ вибран╕ користувачем\n" -"програми пер╕одично у вибраний час. vixie cron дода╓ до стандартного\n" -"UNIX cron к╕лька нових можливостей, включаючи п╕двищену безпеку та\n" -"б╕льш потужн╕ конф╕гурац╕йн╕ опц╕╖." +"Демон routed да╓ можлив╕сть користуватися автоматичним поновленням\n" +"таблиц╕ маршрутизац╕╖ IP за допомогою протокола RIP. Протокол RIP\n" +"широко використову╓ться на невеликих мережах, в той час, як на б╕льш\n" +"складних необх╕дне застосування б╕льш розвинених протокол╕в\n" +"маршрутизац╕╖." + +#: ../../lang.pm:1 +#, c-format +msgid "Kiribati" +msgstr "К╕р╕бат╕" -#: ../../services.pm:1 +#: ../../security/help.pm:1 #, c-format msgid "" -"Runs commands scheduled by the at command at the time specified when\n" -"at was run, and runs batch commands when the load average is low enough." +"Arguments: (arg)\n" +"\n" +"Allow/Forbid remote root login." msgstr "" -"Викону╓ команди, запланован╕ командою at п╕д час виконання команди at\n" -"╕ викону╓ пакетн╕ команди, коли системне навантаження достатньо\n" -"низьке. " -#: ../../services.pm:1 +#: ../../standalone/draksplash:1 #, c-format -msgid "" -"apmd is used for monitoring battery status and logging it via syslog.\n" -"It can also be used for shutting down the machine when the battery is low." +msgid "Browse" msgstr "" -"apmd служить для контролю за р╕внем батаре╖ та запису пов╕домлень про\n" -"це у систмний журнал syslog. Кр╕м цього в╕н може вимикати комп'ютер,\n" -"коли батарея розрядилася." -#: ../../services.pm:1 +#: ../../harddrake/data.pm:1 #, c-format -msgid "Anacron is a periodic command scheduler." -msgstr "Anacron служить для пер╕одичного виконання команд." +msgid "CDROM" +msgstr "" -#: ../../services.pm:1 +#: ../../network/tools.pm:1 #, c-format -msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" -msgstr "Запуск звуково╖ системи ALSA (Advanced Linux Sound Architecture)" +msgid "Do you want to try to connect to the Internet now?" +msgstr "Чи Ви хочете спробувати п╕дключитися до ╕нтернету зараз?" -#: ../../standalone.pm:1 +#: ../../keyboard.pm:1 +#, c-format +msgid "Belgian" +msgstr "Бельг╕йська" + +#: ../../install_steps_interactive.pm:1 #, fuzzy, c-format -msgid "Installing packages..." -msgstr "Установка пакету %s" +msgid "Do you have an ISA sound card?" +msgstr "Чи ви ма╓те ╕нш╕?" -#: ../../standalone.pm:1 +#: ../../network/ethernet.pm:1 #, c-format msgid "" -"\n" -"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" -"testing] [-v|--version] " +"No ethernet network adapter has been detected on your system.\n" +"I cannot set up this connection type." msgstr "" +"У Ваш╕й систем╕ нема╓ сконф╕╜урованого адаптера мереж╕ ethernet. Не\n" +"можна встановити з'╓днання цього типу." -#: ../../standalone.pm:1 +#: ../../diskdrake/hd_gtk.pm:1 +#, fuzzy, c-format +msgid "Windows" +msgstr "Домен NIS" + +#: ../../common.pm:1 +#, fuzzy, c-format +msgid "Can't make screenshots before partitioning" +msgstr "Не можу додати жодного п╕дрозд╕лу" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Host Name" +msgstr "Назва хоста" + +#: ../../standalone/logdrake:1 #, c-format -msgid "" -" [everything]\n" -" XFdrake [--noauto] monitor\n" -" XFdrake resolution" -msgstr "" +msgid "/File/Save _As" +msgstr "/Файл/Зм╕нити _назву" -#: ../../standalone.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format msgid "" -"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" -"usbtable] [--dynamic=dev]" +"To get access to printers on remote CUPS servers in your local network you " +"only need to turn on the \"Automatically find available printers on remote " +"machines\" option; the CUPS servers inform your machine automatically about " +"their printers. All printers currently known to your machine are listed in " +"the \"Remote printers\" section in the main window of Printerdrake. If your " +"CUPS server(s) is/are not in your local network, you have to enter the IP " +"address(es) and optionally the port number(s) here to get the printer " +"information from the server(s)." msgstr "" -#: ../../standalone.pm:1 +#: ../../standalone/scannerdrake:1 #, c-format -msgid "" -"[OPTION]...\n" -" --no-confirmation don't ask first confirmation question in " -"MandrakeUpdate mode\n" -" --no-verify-rpm don't verify packages signatures\n" -" --changelog-first display changelog before filelist in the " -"description window\n" -" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" +msgid "%s is not in the scanner database, configure it manually?" msgstr "" -#: ../../standalone.pm:1 +#: ../../any.pm:1 #, c-format -msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" -msgstr "" +msgid "Delay before booting default image" +msgstr "Пауза перед завантаженням основно╖ системи" -#: ../../standalone.pm:1 +#: ../../any.pm:1 #, c-format -msgid "" -"[OPTIONS]\n" -"Network & Internet connection and monitoring application\n" -"\n" -"--defaultintf interface : show this interface by default\n" -"--connect : connect to internet if not already connected\n" -"--disconnect : disconnect to internet if already connected\n" -"--force : used with (dis)connect : force (dis)connection.\n" -"--status : returns 1 if connected 0 otherwise, then exit.\n" -"--quiet : don't be interactive. To be used with (dis)connect." -msgstr "" +msgid "Restrict command line options" +msgstr "Обмежити опц╕╖ командного рядка" -#: ../../standalone.pm:1 +#: ../../standalone/drakxtv:1 +#, fuzzy, c-format +msgid "East Europe" +msgstr "╢вропа" + +#: ../../help.pm:1 ../../install_interactive.pm:1 #, c-format -msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" +msgid "Use free space" +msgstr "Використовувати в╕льний прост╕р" + +#: ../../network/adsl.pm:1 +#, c-format +msgid "use dhcp" +msgstr "користуватися dhcp" + +#: ../../standalone/logdrake:1 +#, c-format +msgid "Mail alert" msgstr "" -#: ../../standalone.pm:1 +#: ../../network/tools.pm:1 +#, c-format +msgid "Internet configuration" +msgstr "Конф╕гурац╕я ╕нтернету" + +#: ../../lang.pm:1 +#, c-format +msgid "Uzbekistan" +msgstr "Узбекистан" + +#: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "[keyboard]" -msgstr "Клав╕атура" +msgid "Detected %s" +msgstr "знайдено %s" -#: ../../standalone.pm:1 +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "/Autodetect _printers" +msgstr "Користуватися автовизначенням" + +#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1 +#: ../../interactive/newt.pm:1 #, c-format -msgid "" -"[OPTIONS]...\n" -"Mandrake Terminal Server Configurator\n" -"--enable : enable MTS\n" -"--disable : disable MTS\n" -"--start : start MTS\n" -"--stop : stop MTS\n" -"--adduser : add an existing system user to MTS (requires username)\n" -"--deluser : delete an existing system user from MTS (requires " -"username)\n" -"--addclient : add a client machine to MTS (requires MAC address, IP, " -"nbi image name)\n" -"--delclient : delete a client machine from MTS (requires MAC address, " -"IP, nbi image name)" -msgstr "" +msgid "Finish" +msgstr "Зак╕нчити" -#: ../../standalone.pm:1 +#: ../../install_steps_gtk.pm:1 #, c-format -msgid "" -"Font Importation and monitoring " -"application \n" -"--windows_import : import from all available windows partitions.\n" -"--xls_fonts : show all fonts that already exist from xls\n" -"--strong : strong verification of font.\n" -"--install : accept any font file and any directry.\n" -"--uninstall : uninstall any font or any directory of font.\n" -"--replace : replace all font if already exist\n" -"--application : 0 none application.\n" -" : 1 all application available supported.\n" -" : name_of_application like so for staroffice \n" -" : and gs for ghostscript for only this one." -msgstr "" +msgid "Show automatically selected packages" +msgstr "Показувати автоматично вибран╕ пакети" -#: ../../standalone.pm:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "" -"[OPTIONS] [PROGRAM_NAME]\n" -"\n" -"OPTIONS:\n" -" --help - print this help message.\n" -" --report - program should be one of mandrake tools\n" -" --incident - program should be one of mandrake tools" +msgid "CPU flags reported by the kernel" msgstr "" -#: ../../standalone.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "" -"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" -"Backup and Restore application\n" -"\n" -"--default : save default directories.\n" -"--debug : show all debug messages.\n" -"--show-conf : list of files or directories to backup.\n" -"--config-info : explain configuration file options (for non-X " -"users).\n" -"--daemon : use daemon configuration. \n" -"--help : show this message.\n" -"--version : show version number.\n" -msgstr "" +msgid "Togo" +msgstr "Того" -#: ../../standalone.pm:1 +#: ../../standalone/drakTermServ:1 #, c-format -msgid "" -"This program is free software; you can redistribute it and/or modify\n" -"it under the terms of the GNU General Public License as published by\n" -"the Free Software Foundation; either version 2, or (at your option)\n" -"any later version.\n" -"\n" -"This program is distributed in the hope that it will be useful,\n" -"but WITHOUT ANY WARRANTY; without even the implied warranty of\n" -"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" -"GNU General Public License for more details.\n" -"\n" -"You should have received a copy of the GNU General Public License\n" -"along with this program; if not, write to the Free Software\n" -"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" +msgid "Something went wrong! - Is mkisofs installed?" msgstr "" -#: ../../steps.pm:1 +#: ../../Xconfig/card.pm:1 +#, c-format +msgid "16 MB" +msgstr "16 Мб" + +#: ../../any.pm:1 ../../install_steps_interactive.pm:1 +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Please try again" +msgstr "Будь-ласка, спробуйте ще раз" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "The model is correct" +msgstr "Все в╕рно?" + +#: ../../install_interactive.pm:1 #, c-format -msgid "Exit install" -msgstr "Вийти з установки" +msgid "FAT resizing failed: %s" +msgstr "Автоматична зм╕на розм╕ру FAT не спрацювала: %s" -#: ../../steps.pm:1 -#, fuzzy, c-format -msgid "Install updates" -msgstr "Встановити систему" +#: ../../help.pm:1 ../../install_steps_gtk.pm:1 +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Individual package selection" +msgstr "╤ндив╕дульний виб╕р пакет╕в" -#: ../../steps.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Configure services" -msgstr "Настро╖ти серв╕си" +msgid "This partition is not resizeable" +msgstr "Розм╕р цього п╕дрозд╕лу неможливо зм╕нити" -#: ../../steps.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Configure X" -msgstr "Настро╖ти X" +msgid "Location" +msgstr "Розташування" -#: ../../steps.pm:1 +#: ../../standalone/drakxtv:1 #, c-format -msgid "Install bootloader" -msgstr "Блок завантаження" +msgid "USA (cable-hrc)" +msgstr "" -#: ../../steps.pm:1 +#: ../../diskdrake/hd_gtk.pm:1 #, c-format -msgid "Configure networking" -msgstr "Настро╖ти мережу" +msgid "Journalised FS" +msgstr "Журнальна файлова система" -#: ../../steps.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Add a user" -msgstr "Додати користувача" +msgid "Guatemala" +msgstr "╫ватемала" -#: ../../steps.pm:1 +#: ../../standalone/scannerdrake:1 #, fuzzy, c-format -msgid "Root password" -msgstr "Без паролю" +msgid "This machine" +msgstr "(на ц╕й машин╕)" -#: ../../steps.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Install system" -msgstr "Встановити систему" +msgid "DOS drive letter: %s (just a guess)\n" +msgstr "Л╕тера в ДОС╕: %s (припущення)\n" -#: ../../steps.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Choose packages to install" -msgstr "Виб╕р пакет╕в" +msgid "Select the files or directories and click on 'OK'" +msgstr "" -#: ../../steps.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Format partitions" -msgstr "Форматувати п╕дрозд╕ли" - -#: ../../steps.pm:1 -#, fuzzy, c-format -msgid "Partitioning" -msgstr "Друк" +msgid "Bahrain" +msgstr "Бахрейн" -#: ../../steps.pm:1 +#: ../../standalone/drakfloppy:1 #, c-format -msgid "Choose your keyboard" -msgstr "Вибер╕ть тип клав╕атури" +msgid "omit scsi modules" +msgstr "пропускати модул╕ scsi" -#: ../../steps.pm:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "Select installation class" -msgstr "Вибер╕ть тип установки" +msgid "family of the cpu (eg: 6 for i686 class)" +msgstr "" -#: ../../steps.pm:1 +#: ../../network/netconnect.pm:1 #, c-format -msgid "Hard drive detection" -msgstr "Визначення типу диску" +msgid "" +"Because you are doing a network installation, your network is already " +"configured.\n" +"Click on Ok to keep your configuration, or cancel to reconfigure your " +"Internet & Network connection.\n" +msgstr "" +"Через те, що ви робите установку по мереж╕, ваша мережа вже\n" +"сконф╕╜урована. \n" +"\n" +"Натисн╕ть на Гаразд щоб зберегти установки мереж╕, або на В╕дм╕нити\n" +"для того, щоб зм╕нити установки з'╓днання ╕нтернета ╕ мереж╕.\n" -#: ../../steps.pm:1 +#: ../../Xconfig/various.pm:1 #, c-format -msgid "Configure mouse" -msgstr "Сконф╕гуруйте мишу" +msgid "Keyboard layout: %s\n" +msgstr "Розкладка клав╕атури: %s\n" -#: ../../steps.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "License" +msgid "" +"Here you can choose whether the printers connected to this machine should be " +"accessable by remote machines and by which remote machines." msgstr "" -#: ../../steps.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Language" -msgstr "Вибер╕ть мову" +msgid "Maltese (US)" +msgstr "" -#: ../../ugtk2.pm:1 +#: ../../services.pm:1 #, c-format -msgid "utopia 25" +msgid "" +"Mounts and unmounts all Network File System (NFS), SMB (Lan\n" +"Manager/Windows), and NCP (NetWare) mount points." msgstr "" +"Монту╓ та розмонтову╓ вс╕ файлов╕ системи типу Network File System\n" +"(NFS), SMB (Lan Manager/Windows) та NCP (NetWare)." -#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1 -#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1 -#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1 -#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1 -#, c-format -msgid "OK" -msgstr "Гаразд" +#: ../../harddrake/data.pm:1 +#, fuzzy, c-format +msgid "Tvcard" +msgstr "Телев╕з╕йна плата" -#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1 -#, c-format -msgid "logdrake" -msgstr "logdrake" +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "Toggle between normal/expert mode" +msgstr "Експерт > Звичайний" -#: ../../ugtk.pm:1 +#: ../../standalone/drakfloppy:1 #, c-format -msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" -msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" +msgid "Size" +msgstr "Розм╕р" -#: ../../Xconfig/card.pm:1 +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "GRUB" +msgstr "╫б" + +#: ../../lang.pm:1 #, c-format -msgid "Xpmac (installation display driver)" -msgstr "Xpmac (драйвер дисплея для установки)" +msgid "Greenland" +msgstr "╫ренланд╕я" -#: ../../Xconfig/card.pm:1 +#: ../../mouse.pm:1 #, c-format -msgid "" -"Your card can have 3D hardware acceleration support with XFree %s,\n" -"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." -msgstr "" -"Ця в╕деоплата ма╓ п╕дтримку апаратного прискорення трьохвим╕рно╖\n" -"граф╕ки, але т╕льки для XFree %s, В╤ДМ╤ТЬТЕ, ЩО ЦЕ ЕКСПЕРИМЕНТАЛЬНИЙ\n" -"РЕЖИМ, ЯКИЙ МОЖЕ ПРИВЕСТИ ДО ЗАВИСАННЯ ВАШОГО КОМП'ЮТЕРА." +msgid "Logitech MouseMan+/FirstMouse+" +msgstr "Logitech MouseMan+/FirstMouse+" -#: ../../Xconfig/card.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration" +msgid "Not the correct tape label. Tape is labelled %s." msgstr "" -"XFree %s з ЕКСПЕРИМЕНТАЛЬНОЮ п╕дтримкою апаратного прискорення трьохвим╕рно╖ " -"граф╕ки" -#: ../../Xconfig/card.pm:1 +#: ../../standalone/drakgw:1 #, c-format -msgid "Your card can have 3D hardware acceleration support with XFree %s." +msgid "" +"The setup of Internet Connection Sharing has already been done.\n" +"It's currently enabled.\n" +"\n" +"What would you like to do?" msgstr "" -"Ваша в╕деоплата може користуватися апаратним 3D прискоренням граф╕ки\n" -"але т╕льки з сервером XFree %s." +"Установка сп╕льного користування з'╓днанням з ╕нтернетом вже\n" +"зроблена. Сп╕льне користування в даний момент дозволене.\n" +"\n" +"Що Ви бажа╓те зробити?" -#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1 -#, c-format -msgid "XFree %s with 3D hardware acceleration" -msgstr "XFree %s з апаратним прискоренням трьохвим╕рно╖ граф╕ки" +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "Delete All NBIs" +msgstr "Вибер╕ть файл" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"This dialog allows you to fine tune your bootloader:\n" +"\n" +" * \"%s\": there are three choices for your bootloader:\n" +"\n" +" * \"%s\": if you prefer grub (text menu).\n" +"\n" +" * \"%s\": if you prefer LILO with its text menu interface.\n" +"\n" +" * \"%s\": if you prefer LILO with its graphical interface.\n" +"\n" +" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n" +"you prefer, the bootloader can be installed on the second hard drive\n" +"(\"%s\"), or even on a floppy disk (\"%s\");\n" +"\n" +" * \"%s\": after a boot or a reboot of the computer, this is the delay\n" +"given to the user at the console to select a boot entry other than the\n" +"default.\n" +"\n" +"!! Beware that if you choose not to install a bootloader (by selecting\n" +"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n" +"system! Be sure you know what you are doing before changing any of the\n" +"options. !!\n" +"\n" +"Clicking the \"%s\" button in this dialog will offer advanced options which\n" +"are normally reserved for the expert user." +msgstr "" +"LILO ╕ GRUB - це завантажувач╕ системи для GNU/Linux. Цей крок звично\n" +"повн╕стю автоматизований. Фактично, drakX проведе анал╕з\n" +"завантажувального сектора диску ╕ буде д╕яти в╕дпов╕дно до того, що в\n" +"ньому виявиться:\n" +"\n" +" * якщо тут присутн╕й завантажувальний сектор Windows, в╕н зам╕нить\n" +"його на сектор GRUB/LILO таким чином, щоб Ви могли стартувати обо╓ - ╕\n" +"GNU/Linux, ╕ Windows;\n" +"\n" +" * якщо знайдений блок в╕д GRUB чи LILO, в╕н буде зам╕нений на новий. \n" +"\n" +"Якщо ситуац╕я не така ч╕тка, drakX запропону╓ Вам виб╕р з к╕лькома\n" +"можливими виходами. \n" +"\n" +" * Який завантажувач вживати: Ви ма╓те три вар╕анти на виб╕р:\n" +" \n" +" * LILO з граф╕чним меню: якщо Ви нада╓те перевагу LILO з його\n" +" граф╕чною оболонкою.\n" +"\n" +" * Grub: якщо Вам подоба╓ться Grub (з текстовим меню).\n" +"\n" +" * LILO з текстовим меню: якщо Вам подоба╓ться LILO з текстовим\n" +" меню.\n" +"\n" +" * Пристр╕й завантаження: у б╕льшост╕ випадк╕в Вам не потр╕бно буде\n" +"зм╕нювати неявно встановлений диск (/dev/hda), але якщо Вам потр╕бно,\n" +"Ви можете встановити завантажувач на другому жорсткому диску\n" +"(/dev/hdb) чи нав╕ть на дискет╕ (/de/fd0). \n" +"\n" +" * Затримка перед завантаженням основного ядра: це затримка при\n" +"завантаженн╕ системи, яка нада╓ться користувачев╕, щоб в╕н мав\n" +"можлив╕сть вибрати ╕нший пункт в меню завантажувача.\n" +"\n" +"!! Будьте уважними: якщо Ви натиснете кнопку \"В╕дм╕нити\" (╕ тим самим\n" +"вкажете програм╕ не встановлювати системного завантажувача),\n" +"пересв╕дч╕ться, що Ви ма╓те у запас╕ метод для завантаження системи\n" +"Мандрейк Л╕накс! Будьте також певними, що Ви добре зна╓те, що Ви\n" +"робити, коли Ви зм╕ню╓те будь-як╕ параметри тут!!\n" +"\n" +"Натиснувши кнопку \"Додатково\" в цьому в╕кн╕, Ви отрима╓те доступ до\n" +"багатьох додаткових конф╕╜урац╕йних параметр╕в призначених для\n" +"досв╕дчених користувач╕в.\n" +"\n" +"Мандрейк Л╕накс встановлю╓ св╕й власний системний завантажувач, який\n" +"дозволить Вам завантажувати або GNU/Linux, або будь-яку ╕ншу\n" +"операц╕йну систему, встановлену на ц╕й машин╕.\n" +"\n" +"Якщо на машин╕ встановлена ╕нша операц╕йна система, вона автоматично\n" +"буде додана до списку систем в меню. Тут можна зм╕нити ╕снуюч╕\n" +"параметри для завантаження кожно╖ системи. Подв╕йне клацання на пункт╕\n" +"меню дозволить Вам зм╕нити ╕снуюч╕ параметри, або стерти даний пункт\n" +"меню. \"Додати\" створюж новий пункт. ╤ \"Зак╕нчено\" переходить на\n" +"наступний крок установки." -#: ../../Xconfig/card.pm:1 +#: ../../security/help.pm:1 #, c-format msgid "" -"Your card can have 3D hardware acceleration support but only with XFree %s,\n" -"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" -"Your card is supported by XFree %s which may have a better support in 2D." +"if set, send the mail report to this email address else send it to root." msgstr "" -"Ця в╕деоплата ма╓ п╕дтримку апаратного прискорення трьохвим╕рно╖\n" -"граф╕ки, але т╕льки для XFree %s, В╤ДМ╤ТЬТЕ, ЩО ЦЕ ЕКСПЕРИМЕНТАЛЬНИЙ\n" -"РЕЖИМ, ЯКИЙ МОЖЕ ПРИВЕСТИ ДО ЗАВИСАННЯ ВАШОГО КОМП'ЮТЕРА. Ваша плата\n" -"п╕дтриму╓ться XFree %s, який ма╓ кращу п╕дтримку двовим╕рно╖ граф╕ки." #: ../../Xconfig/card.pm:1 #, c-format -msgid "" -"Your card can have 3D hardware acceleration support but only with XFree %s.\n" -"Your card is supported by XFree %s which may have a better support in 2D." -msgstr "" -"Ваша в╕деоплата може користуватися апаратним прискоренням\n" -"трьохвим╕рно╖ граф╕ки але т╕льки з сервером XFree %s. Ваша в╕деоплата\n" -"п╕дтриму╓ться сервером XFree %s, у якому ви можливо матимете кращий\n" -"супров╕д для двохвим╕рно╖ граф╕ки." +msgid "Which configuration of XFree do you want to have?" +msgstr "Яку конф╕гурац╕ю XFree ви хочете мати?" -#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1 +#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "XFree %s" -msgstr "XFree86 %s" +msgid "More" +msgstr "Ще" -#: ../../Xconfig/card.pm:1 +#: ../../security/level.pm:1 #, fuzzy, c-format -msgid "Configure only card \"%s\"%s" -msgstr "Настро╖ти т╕льки плату \"%s\" (%s)" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "Use Xinerama extension" -msgstr "Користуватися розширенням Xinerama" - -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "Configure all heads independently" -msgstr "Сконф╕╜урувати вс╕ мон╕тори незалежно" +msgid "" +"With this security level, the use of this system as a server becomes " +"possible.\n" +"The security is now high enough to use the system as a server which can " +"accept\n" +"connections from many clients. Note: if your machine is only a client on the " +"Internet, you should choose a lower level." +msgstr "" +"На цьому р╕вн╕ безпеки систему можна використовувати в якост╕ сервера.\n" +"Р╕вень безпеки для ц╕╓╖ системи тепер достатн╕й для того, щоб\n" +"використовувати ╖╖ як сервер, що допуска╓ п╕д'╓днання до нього\n" +"багатьох кл╕╓нт╕в." -#: ../../Xconfig/card.pm:1 +#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format -msgid "Which configuration of XFree do you want to have?" -msgstr "Яку конф╕гурац╕ю XFree ви хочете мати?" +msgid "Account Password" +msgstr "Пароль у провайдера" -#: ../../Xconfig/card.pm:1 +#: ../../any.pm:1 #, c-format -msgid "XFree configuration" -msgstr "Конф╕╜урац╕я XFree" +msgid "" +"You decided to install the bootloader on a partition.\n" +"This implies you already have a bootloader on the hard drive you boot (eg: " +"System Commander).\n" +"\n" +"On which drive are you booting?" +msgstr "" -#: ../../Xconfig/card.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Select the memory size of your graphics card" -msgstr "Вибер╕ть розм╕р пам'ят╕ Вашо╖ граф╕чно╖ плати" +msgid "Tajik keyboard" +msgstr "Таджицька клав╕атура" -#: ../../Xconfig/card.pm:1 +#: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" -"Your system supports multiple head configuration.\n" -"What do you want to do?" +"You can copy the printer configuration which you have done for the spooler %" +"s to %s, your current spooler. All the configuration data (printer name, " +"description, location, connection type, and default option settings) is " +"overtaken, but jobs will not be transferred.\n" +"Not all queues can be transferred due to the following reasons:\n" msgstr "" -"Ваша система може працювати з к╕лькома мон╕торами.\n" -"Що ви хочете настро╖ти?" +"Конф╕╜урац╕ю, що була п╕дготована для черги %s Ви можете скоп╕ювати\n" +"Для дано╖ установки черги друку (%s). Вс╕ установочн╕ дан╕ (назва\n" +"принтера, опис, розташування, тип з'╓днання ╕ стандартн╕ установки)\n" +"будуть перенесен╕ на нову конф╕╜урац╕ю. Але роботи з черги перенесено\n" +"не буде. Не вс╕ черги можуть бути перенесеними з таких причин: \n" -#: ../../Xconfig/card.pm:1 +#: ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "Font List" +msgstr "Точка монтування" + +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "Multi-head configuration" -msgstr "Конф╕╜урац╕я з к╕лькома мон╕торами" +msgid "" +"You may need to change your Open Firmware boot-device to\n" +" enable the bootloader. If you don't see the bootloader prompt at\n" +" reboot, hold down Command-Option-O-F at reboot and enter:\n" +" setenv boot-device %s,\\\\:tbxi\n" +" Then type: shut-down\n" +"At your next boot you should see the bootloader prompt." +msgstr "" +"Можливо вам потр╕бно зм╕нити пристр╕й завантаження у Open Firmware для\n" +"того, щоб дозволити роботу завантажувача. Якщо ви не бачите запрошення\n" +"завантажувача при завантаженн╕ системи, натисн╕ть Command-Option-O-F\n" +"при завантаженн╕ ╕ введ╕ть setenv boot-device %s,\\\\:tbxi. П╕сля\n" +"цього надрукуйте shut-down. При наступному завантаженн╕ ви побачите\n" +"п╕дказку завантажувача. " -#: ../../Xconfig/card.pm:1 +#: ../../install_steps_interactive.pm:1 #, fuzzy, c-format -msgid "Choose an X server" -msgstr "Вибер╕ть X сервер" +msgid "" +"You appear to have an OldWorld or Unknown\n" +" machine, the yaboot bootloader will not work for you.\n" +"The install will continue, but you'll\n" +" need to use BootX or some other means to boot your machine" +msgstr "" +"Зда╓ться у Вас машина OldWorld чи Нев╕дома. Завантажувач yaboot не\n" +"буде працювати з ц╕╓ю машиною. Установка буде продовжуватись, але для\n" +"завантаження, Вам потр╕бно користуватись BootX." -#: ../../Xconfig/card.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "X server" -msgstr "X сервер" +msgid "Select file" +msgstr "Вибер╕ть файл" -#: ../../Xconfig/card.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "64 MB or more" -msgstr "64 Мб чи б╕льше" +msgid "" +"Choose the network or host on which the local printers should be made " +"available:" +msgstr "" -#: ../../Xconfig/card.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "32 MB" -msgstr "32 Мб" +msgid "" +"These commands you can also use in the \"Printing command\" field of the " +"printing dialogs of many applications, but here do not supply the file name " +"because the file to print is provided by the application.\n" +msgstr "" -#: ../../Xconfig/card.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "16 MB" -msgstr "16 Мб" +msgid "Japan" +msgstr "Япон╕я" -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "8 MB" -msgstr "8 Мб" +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Print option list" +msgstr "Опц╕╖ принтера" -#: ../../Xconfig/card.pm:1 +#: ../../standalone/localedrake:1 #, c-format -msgid "4 MB" -msgstr "4 Мб" +msgid "The change is done, but to be effective you must logout" +msgstr "" -#: ../../Xconfig/card.pm:1 -#, c-format -msgid "2 MB" -msgstr "2 Мб" +#: ../../diskdrake/smbnfs_gtk.pm:1 +#, fuzzy, c-format +msgid "Search servers" +msgstr "Сервер DNS" -#: ../../Xconfig/card.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "1 MB" -msgstr "1 Мб" +msgid "NCP queue name missing!" +msgstr "Нема╓ назви черги NCP!" -#: ../../Xconfig/card.pm:1 +#: ../../standalone/net_monitor:1 #, c-format -msgid "512 kB" -msgstr "512 кб" +msgid "" +"Warning, another internet connection has been detected, maybe using your " +"network" +msgstr "" -#: ../../Xconfig/card.pm:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "256 kB" -msgstr "256 кб" +msgid "Cd-Rom labeled \"%s\"" +msgstr "Компакт-диск з етикеткою \"%s\"" -#: ../../Xconfig/main.pm:1 +#: ../../services.pm:1 #, c-format msgid "" -"Keep the changes?\n" -"The current configuration is:\n" -"\n" -"%s" +"Saves and restores system entropy pool for higher quality random\n" +"number generation." msgstr "" -"Зберегти зм╕ни?\n" -"╤снуюча конф╕гурац╕я:\n" -"\n" -"%s" +"Збер╕га╓ ╕ в╕дновлю╓ джерело ентроп╕╖ в систем╕, тим самим п╕двищуючи\n" +"як╕сть ╜енерац╕╖ випадкових чисел." -#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1 -#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 -#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "Options" -msgstr "Параметри" +msgid "" +"Failed to check filesystem %s. Do you want to repair the errors? (beware, " +"you can loose data)" +msgstr "" -#: ../../Xconfig/main.pm:1 +#: ../../share/advertising/07-server.pl:1 #, c-format -msgid "Test" +msgid "Turn your computer into a reliable server" msgstr "" -#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1 +#: ../../network/network.pm:1 #, c-format -msgid "Resolution" -msgstr "Розд╕льна здатн╕сть" +msgid " (driver %s)" +msgstr " (%s драйвер)" -#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Monitor" -msgstr "Мон╕тор" - -#: ../../Xconfig/main.pm:1 -#, fuzzy, c-format -msgid "Graphic Card" -msgstr "В╕део плата" +msgid "" +"Loopback file(s):\n" +" %s\n" +msgstr "" +"Файл(и) зворотнього монтування: \n" +" %s\n" -#: ../../Xconfig/monitor.pm:1 +#: ../../network/isdn.pm:1 #, c-format -msgid "Vertical refresh rate" -msgstr "Частота вертикально╖ розгортки" +msgid "I don't know" +msgstr "Не знаю" -#: ../../Xconfig/monitor.pm:1 +#: ../../printer/main.pm:1 #, c-format -msgid "Horizontal refresh rate" -msgstr "Частота горизонтально╖ розгортки" +msgid ", TCP/IP host \"%s\", port %s" +msgstr "" -#: ../../Xconfig/monitor.pm:1 +#: ../../standalone/drakautoinst:1 #, c-format msgid "" -"The two critical parameters are the vertical refresh rate, which is the " -"rate\n" -"at which the whole screen is refreshed, and most importantly the horizontal\n" -"sync rate, which is the rate at which scanlines are displayed.\n" +"You are about to configure an Auto Install floppy. This feature is somewhat " +"dangerous and must be used circumspectly.\n" "\n" -"It is VERY IMPORTANT that you do not specify a monitor type with a sync " -"range\n" -"that is beyond the capabilities of your monitor: you may damage your " -"monitor.\n" -" If in doubt, choose a conservative setting." +"With that feature, you will be able to replay the installation you've " +"performed on this computer, being interactively prompted for some steps, in " +"order to change their values.\n" +"\n" +"For maximum safety, the partitioning and formatting will never be performed " +"automatically, whatever you chose during the install of this computer.\n" +"\n" +"Do you want to continue?" msgstr "" -"Два дуже важливих параметри - це частота вертикально╖ розгортки\n" -"(тобто - частота, з якою обновлю╓ться зображення на екран╕), та\n" -"найб╕льш важливо - частота горизонтально╖ синхрон╕зац╕╖ (тобто - та\n" -"частота, з якою на екран╕ малюються горизонтальн╕ рядки).\n" +"Ви можете зараз настро╖ти дискету для автоматизовано╖ устаноки. Цей\n" +"режим установки дещо небезпечний ╕ ним треба користуватися\n" +"пом╕рковано.\n" "\n" -"ДУЖЕ ВАЖЛИВО ПАМ'ЯТАТИ, що ви повинн╕ вибрати такий мон╕тор, параметри\n" -"якого не перевищують справжн╕х параметр╕в Вашого мон╕тора: ╕накше Ви\n" -"можете причинити непоправну шкоду сво╓му мон╕тору. \n" -"Якщо ви ма╓те сумн╕ви щодо характеристик свого мон╕тора вибер╕ть певно\n" -"г╕рший мон╕тор." +"Користуючись цим режимом Ви можете повторити установку, що Ви\n" +"т╕льки-що виконали на дан╕й систем╕. На деяких етапах Вам будуть\n" +"задан╕ запитання, щоб зм╕нити значення к╕лькох зм╕нних.\n" +"\n" +"Для Вашо╖ безпеки, под╕л диску на п╕дрозд╕ли ╕ форматування н╕коли не\n" +"буде виконуватись автоматично незалежно в╕д того, що вибрано при\n" +"установц╕.\n" +"\n" +"Хочете продовжувати? " -#: ../../Xconfig/monitor.pm:1 +#: ../../harddrake/sound.pm:1 #, c-format -msgid "Plug'n Play probing failed. Please select the correct monitor" +msgid "" +"\n" +"\n" +"Your card currently use the %s\"%s\" driver (default driver for your card is " +"\"%s\")" msgstr "" -#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1 +#: ../../standalone/drakfont:1 #, fuzzy, c-format -msgid "Vendor" -msgstr "Назад" +msgid "Post Uninstall" +msgstr "Вийти з установки" -#: ../../Xconfig/monitor.pm:1 +#: ../../standalone/scannerdrake:1 #, c-format -msgid "Plug'n Play" +msgid " (" msgstr "" -#: ../../Xconfig/monitor.pm:1 -#, c-format -msgid "Choose a monitor" -msgstr "Вибер╕ть тип мон╕тору" +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "Cpuid level" +msgstr "Встановлення р╕вня безпеки" -#: ../../Xconfig/resolution_and_depth.pm:1 +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Mongolian (cyrillic)" +msgstr "Сербська (кирилиця)" + +#: ../../standalone/drakfloppy:1 #, c-format -msgid "Graphics card: %s" -msgstr "В╕део плата: %s" +msgid "Add a module" +msgstr "Додати модуль" -#: ../../Xconfig/resolution_and_depth.pm:1 +#: ../../standalone/drakconnect:1 #, c-format -msgid "Choose the resolution and the color depth" -msgstr "Вибер╕ть розд╕льну здатн╕сть та к╕льк╕сть кольор╕в" +msgid "Profile to delete:" +msgstr "Проф╕ль для стирання:" -#: ../../Xconfig/resolution_and_depth.pm:1 +#: ../../standalone/net_monitor:1 +#, fuzzy, c-format +msgid "Local measure" +msgstr "Локальн╕ файли" + +#: ../../mouse.pm:1 #, c-format -msgid "Resolutions" -msgstr "Розд╕льн╕ здатност╕" +msgid "busmouse" +msgstr "busmouse" -#: ../../Xconfig/resolution_and_depth.pm:1 +#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format -msgid "4 billion colors (32 bits)" -msgstr "4 м╕льйярди кольор╕в (32 б╕т)" +msgid "Account Login (user name)" +msgstr "Рахунок користувача (╕м'я користувача)" -#: ../../Xconfig/resolution_and_depth.pm:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "16 million colors (24 bits)" -msgstr "16 м╕льйон╕в кольор╕в (24 б╕т)" +msgid "Fdiv bug" +msgstr "" -#: ../../Xconfig/resolution_and_depth.pm:1 +#: ../../network/drakfirewall.pm:1 #, c-format -msgid "65 thousand colors (16 bits)" -msgstr "65 тисяч кольор╕в (16 б╕т)" +msgid "" +"drakfirewall configurator\n" +"\n" +"Make sure you have configured your Network/Internet access with\n" +"drakconnect before going any further." +msgstr "" -#: ../../Xconfig/resolution_and_depth.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "32 thousand colors (15 bits)" -msgstr "32 тисяч╕ кольор╕в (15 б╕т)" +msgid "Benin" +msgstr "Бен╕н" -#: ../../Xconfig/resolution_and_depth.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "256 colors (8 bits)" -msgstr "265 кольор╕в (8 б╕т)" +msgid "Uruguay" +msgstr "Уругвай" -#: ../../Xconfig/test.pm:1 +#: ../../standalone/drakperm:1 #, fuzzy, c-format -msgid "Is this the correct setting?" -msgstr "Все в╕рно?" +msgid "Path selection" +msgstr "Зберегти виб╕р пакет╕в" -#: ../../Xconfig/test.pm:1 -#, fuzzy, c-format -msgid "Leaving in %d seconds" -msgstr "%d секунд" +#: ../../standalone/scannerdrake:1 +#, c-format +msgid "Name/IP address of host:" +msgstr "" -#: ../../Xconfig/test.pm:1 +#: ../../Xconfig/various.pm:1 #, c-format +msgid "Monitor: %s\n" +msgstr "Мон╕тор: %s\n" + +#: ../../partition_table/raw.pm:1 +#, fuzzy, c-format msgid "" -"An error occurred:\n" -"%s\n" -"Try to change some parameters" +"Something bad is happening on your drive. \n" +"A test to check the integrity of data has failed. \n" +"It means writing anything on the disk will end up with random, corrupted " +"data." msgstr "" +"Щось недобре в╕дбува╓ться на вашому диску.\n" +"Тестування ц╕л╕сност╕ даних було невдалим.\n" +"Це означа╓, що запис будь-чого на диск матиме сумний результат." -#: ../../Xconfig/test.pm:1 +#: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "Warning: testing this graphic card may freeze your computer" -msgstr "" -"Увага! Тестування ц╕╓╖ граф╕чно╖ плати може призвести до зависання\n" -"Вашого комп'ютера." +msgid "Printer host name or IP missing!" +msgstr "Нема╓ назви хоста принтера!" -#: ../../Xconfig/test.pm:1 +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Please check all users that you want to include in your backup." +msgstr "Вибер╕ть пакети, як╕ Ви хочете встановити" + +#: ../../standalone/scannerdrake:1 #, c-format -msgid "Do you want to test the configuration?" -msgstr "Чи ви хочете випробувати нову конф╕╜урац╕ю?" +msgid "" +"The %s must be configured by printerdrake.\n" +"You can launch printerdrake from the Mandrake Control Center in Hardware " +"section." +msgstr "" -#: ../../Xconfig/test.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Test of the configuration" -msgstr "Тестування конф╕╜урац╕╖" +msgid "Bangladesh" +msgstr "Бангладеш" -#: ../../Xconfig/various.pm:1 -#, fuzzy, c-format -msgid "What norm is your TV using?" -msgstr "Який тип з'╓днання ISDN Ви ма╓те?" +#: ../../standalone/drakxtv:1 +#, c-format +msgid "Japan (cable)" +msgstr "" -#: ../../Xconfig/various.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format msgid "" -"Your graphic card seems to have a TV-OUT connector.\n" -"It can be configured to work using frame-buffer.\n" "\n" -"For this you have to plug your graphic card to your TV before booting your " -"computer.\n" -"Then choose the \"TVout\" entry in the bootloader\n" +"Welcome to the Printer Setup Wizard\n" "\n" -"Do you have this feature?" +"This wizard will help you to install your printer(s) connected to this " +"computer, connected directly to the network or to a remote Windows machine.\n" +"\n" +"If you have printer(s) connected to this machine, Please plug it/them in on " +"this computer and turn it/them on so that it/they can be auto-detected. Also " +"your network printer(s) and your Windows machines must be connected and " +"turned on.\n" +"\n" +"Note that auto-detecting printers on the network takes longer than the auto-" +"detection of only the printers connected to this machine. So turn off the " +"auto-detection of network and/or Windows-hosted printers when you don't need " +"it.\n" +"\n" +" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " +"to set up your printer(s) now." msgstr "" -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "" -"I can setup your computer to automatically start the graphical interface " -"(XFree) upon booting.\n" -"Would you like XFree to start when you reboot?" -msgstr "" -"Я можу настро╖ти Вашу систему так, що X буде стартувати автоматично\n" -"п╕сля завантаження системи.\n" -"Чи ви хочете, щоб X стартував автоматично?" +#: ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "Initial tests" +msgstr "Пов╕домлення при завантаженн╕" -#: ../../Xconfig/various.pm:1 +#: ../../network/isdn.pm:1 #, c-format -msgid "Graphical interface at startup" -msgstr "Стартувати X автоматично" +msgid "Continue" +msgstr "Продовжувати" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Custom Restore" +msgstr "Спец╕альний" -#: ../../Xconfig/various.pm:1 +#: ../../help.pm:1 #, c-format -msgid "XFree86 driver: %s\n" -msgstr "XFree86 драйвер: %s\n" +msgid "" +"\"%s\": if a sound card is detected on your system, it is displayed here.\n" +"If you notice the sound card displayed is not the one that is actually\n" +"present on your system, you can click on the button and choose another\n" +"driver." +msgstr "" -#: ../../Xconfig/various.pm:1 +#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format -msgid "XFree86 server: %s\n" -msgstr "X сервер: %s\n" +msgid "Script-based" +msgstr "За допомогою скрипта" -#: ../../Xconfig/various.pm:1 +#: ../../install_any.pm:1 ../../partition_table.pm:1 #, c-format -msgid "Resolution: %s\n" -msgstr "Розд╕льна здатн╕сть: %s\n" +msgid "Error reading file %s" +msgstr "Помилка при читанн╕ файла %s" -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "Color depth: %s\n" -msgstr "Глибина кольору: %s\n" +#: ../../harddrake/v4l.pm:1 +#, fuzzy, c-format +msgid "PLL setting:" +msgstr "форматування" -#: ../../Xconfig/various.pm:1 +#: ../../install_interactive.pm:1 ../../install_steps.pm:1 #, c-format -msgid "Graphics memory: %s kB\n" -msgstr "В╕део пам'я╕ть: %sкб\n" +msgid "You must have a FAT partition mounted in /boot/efi" +msgstr "Ви повинн╕ мати FAT п╕дрозд╕л змонтований в /boot/efi " -#: ../../Xconfig/various.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Graphics card: %s\n" -msgstr "В╕део плата: %s\n" +msgid " on " +msgstr "" -#: ../../Xconfig/various.pm:1 +#: ../../diskdrake/dav.pm:1 #, c-format -msgid "Monitor VertRefresh: %s\n" -msgstr "Частота вертикально╖ розгортки мон╕тора: %s\n" +msgid "The URL must begin with http:// or https://" +msgstr "" -#: ../../Xconfig/various.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Monitor HorizSync: %s\n" -msgstr "Горизонтальна синхрон╕зац╕я мон╕тора: %s\n" +msgid "" +"You can specify directly the URI to access the printer. The URI must fulfill " +"either the CUPS or the Foomatic specifications. Note that not all URI types " +"are supported by all the spoolers." +msgstr "" +"Можна вказати безпосередньо URI для доступу до принтера. URI ма╓\n" +"в╕дпов╕дати специф╕кац╕ям або CUPS або Foomatic. Зауважте, однак, що\n" +"не вс╕ типи URI п╕дтримуються засобами керування черг друку." -#: ../../Xconfig/various.pm:1 +#: ../../any.pm:1 #, c-format -msgid "Monitor: %s\n" -msgstr "Мон╕тор: %s\n" +msgid "Other OS (SunOS...)" +msgstr "╤нш╕ системи (SunOS...)" -#: ../../Xconfig/various.pm:1 -#, c-format -msgid "Mouse device: %s\n" -msgstr "Спец╕альний пристр╕й миш╕: %s\n" +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Install/Upgrade" +msgstr "Встановити/Поновити" -#: ../../Xconfig/various.pm:1 +#: ../../install_steps_gtk.pm:1 #, c-format -msgid "Mouse type: %s\n" -msgstr "Тип миш╕: %s\n" +msgid "%d packages" +msgstr "%d пакети" -#: ../../Xconfig/various.pm:1 +#: ../../standalone.pm:1 #, c-format -msgid "Keyboard layout: %s\n" -msgstr "Розкладка клав╕атури: %s\n" +msgid "" +"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" +"Backup and Restore application\n" +"\n" +"--default : save default directories.\n" +"--debug : show all debug messages.\n" +"--show-conf : list of files or directories to backup.\n" +"--config-info : explain configuration file options (for non-X " +"users).\n" +"--daemon : use daemon configuration. \n" +"--help : show this message.\n" +"--version : show version number.\n" +msgstr "" -#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 +#: ../../diskdrake/smbnfs_gtk.pm:1 +#, fuzzy, c-format +msgid "Domain Authentication Required" +msgstr "Автентикац╕я" + +#: ../../standalone/drakTermServ:1 #, c-format -msgid "Options: %s" -msgstr "Параметри: %s" +msgid "" +"\n" +"\n" +" Thanks:\n" +"\t- LTSP Project http://www.ltsp.org\n" +"\t- Michael Brown \n" +"\n" +msgstr "" -#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 +#: ../../crypto.pm:1 ../../lang.pm:1 #, c-format -msgid "Mount point: " -msgstr "Точка монтування: " +msgid "Costa Rica" +msgstr "Коста-Р╕ка" -#: ../../diskdrake/dav.pm:1 +#: ../../security/level.pm:1 #, fuzzy, c-format -msgid "Server: " -msgstr "Сервер" +msgid "Use libsafe for servers" +msgstr "Вибер╕ть параметри для сервера" -#: ../../diskdrake/dav.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "The URL must begin with http:// or https://" +msgid "Icelandic" +msgstr "╤сландська" + +#: ../../standalone.pm:1 +#, c-format +msgid "" +"\n" +"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" +"testing] [-v|--version] " msgstr "" -#: ../../diskdrake/dav.pm:1 +#: ../../standalone/XFdrake:1 +#, c-format +msgid "Please relog into %s to activate the changes" +msgstr "Заре╓струйтеся, будь-ласка, ще раз у %s щоб привести у д╕ю зм╕ни" + +#: ../../my_gtk.pm:1 #, fuzzy, c-format -msgid "Please enter the WebDAV server URL" -msgstr "Випробуйте мишку, будь-ласка" +msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*" +msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" -#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 -#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 +#: ../../standalone/drakboot:1 #, c-format -msgid "Mount point" -msgstr "Точка монтування" +msgid "Lilo/grub mode" +msgstr "Режим Lilo/grub" -#: ../../diskdrake/dav.pm:1 +#: ../../standalone/drakfloppy:1 #, c-format -msgid "Server" -msgstr "Сервер" +msgid "Output" +msgstr "Вих╕д" -#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 -#: ../../diskdrake/smbnfs_gtk.pm:1 +#: ../../loopback.pm:1 #, c-format -msgid "Mount" -msgstr "Монтувати" +msgid "Circular mounts %s\n" +msgstr "Кругов╕ точки монтування %s\n" -#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 -#: ../../diskdrake/smbnfs_gtk.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Unmount" -msgstr "Розмонтувати" +msgid "Martinique" +msgstr "Март╕н╕ка" -#: ../../diskdrake/dav.pm:1 +#: ../../standalone/drakbackup:1 +#, c-format +msgid "HardDrive / NFS" +msgstr "" + +#: ../../modules/parameters.pm:1 #, fuzzy, c-format -msgid "New" -msgstr "новий" +msgid "a number" +msgstr "Номер телефону" -#: ../../diskdrake/dav.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "" -"WebDAV is a protocol that allows you to mount a web server's directory\n" -"locally, and treat it like a local filesystem (provided the web server is\n" -"configured as a WebDAV server). If you would like to add WebDAV mount\n" -"points, select \"New\"." -msgstr "" +msgid "Swedish" +msgstr "Шведська" -#: ../../diskdrake/hd_gtk.pm:1 +#. -PO: the %s is the driver type (scsi, network, sound,...) +#: ../../modules/interactive.pm:1 #, c-format -msgid "Use ``%s'' instead" -msgstr "Зам╕сть цього скористайтеся ``%s''" +msgid "Which %s driver should I try?" +msgstr "Який драйвер %s мен╕ спробувати?" -#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 -#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1 +#: ../../standalone/logdrake:1 #, c-format -msgid "Type" -msgstr "Тип" +msgid "" +"You will receive an alert if one of the selected services is no longer " +"running" +msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format -msgid "Use ``Unmount'' first" -msgstr "Спочатку скористуйтеся ``Розмонтувати''" +msgid "Filesystem types:" +msgstr "Типи файлових систем:" -#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 +#: ../../printer/main.pm:1 #, c-format -msgid "Delete" -msgstr "Стерти" +msgid ", multi-function device on HP JetDirect" +msgstr "" -#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Create" -msgstr "Створити" +msgid "Northern Mariana Islands" +msgstr "П╕вн╕чн╕ Мар╕анськ╕ острови" -#: ../../diskdrake/hd_gtk.pm:1 +#: ../../mouse.pm:1 #, c-format -msgid "Filesystem types:" -msgstr "Типи файлових систем:" +msgid "none" +msgstr "Н╕чого" -#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 +#: ../../standalone/drakperm:1 +#, fuzzy, c-format +msgid "user :" +msgstr "╤м'я користувача" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Please enter your password" +msgstr "Будь-ласка, спробуйте ще раз" + +#: ../../standalone/drakconnect:1 #, c-format -msgid "Empty" -msgstr "Пусто" +msgid "" +"Name of the profile to create (the new profile is created as a copy of the " +"current one) :" +msgstr "" +"Назва проф╕лю для створення (новий проф╕ль створю╓ться як коп╕я вже " +"╕снуючого):" + +#: ../../harddrake/data.pm:1 +#, fuzzy, c-format +msgid "Floppy" +msgstr "Записати на дискету" -#: ../../diskdrake/hd_gtk.pm:1 +#: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "Windows" -msgstr "Домен NIS" +msgid "Please check if you want to erase your RW media (1st Session)" +msgstr "Клацн╕ть, будь-ласка, на п╕дрозд╕л╕" -#: ../../diskdrake/hd_gtk.pm:1 +#: ../../standalone/drakfont:1 #, c-format -msgid "HFS" -msgstr "HFS" +msgid "Ghostscript referencing" +msgstr "" -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "SunOS" -msgstr "SunOS" +#: ../../help.pm:1 ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Bootloader" +msgstr "Використовувати завантажувач" -#: ../../diskdrake/hd_gtk.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Swap" -msgstr "Swap" +msgid "Move" +msgstr "Перем╕стити" -#: ../../diskdrake/hd_gtk.pm:1 +#: ../../any.pm:1 ../../help.pm:1 #, c-format -msgid "Journalised FS" -msgstr "Журнальна файлова система" +msgid "Bootloader to use" +msgstr "Використовувати завантажувач" -#: ../../diskdrake/hd_gtk.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Ext2" -msgstr "Ext2" +msgid "SMB server host" +msgstr "Назва хоста SMB сервера" -#: ../../diskdrake/hd_gtk.pm:1 +#: ../../standalone/drakTermServ:1 #, fuzzy, c-format -msgid "No hard drives found" -msgstr "Локальний принтер" +msgid "Name Servers:" +msgstr "Сервер NIS" -#: ../../diskdrake/hd_gtk.pm:1 +#: ../../install_messages.pm:1 #, c-format -msgid "Please click on a partition" -msgstr "Клацн╕ть, будь-ласка, на п╕дрозд╕л╕" - -#: ../../diskdrake/hd_gtk.pm:1 -#, fuzzy, c-format msgid "" -"You have one big MicroSoft Windows partition.\n" -"I suggest you first resize that partition\n" -"(click on it, then click on \"Resize\")" +"\n" +"Warning\n" +"\n" +"Please read carefully the terms below. If you disagree with any\n" +"portion, you are not allowed to install the next CD media. Press 'Refuse' \n" +"to continue the installation without using these media.\n" +"\n" +"\n" +"Some components contained in the next CD media are not governed\n" +"by the GPL License or similar agreements. Each such component is then\n" +"governed by the terms and conditions of its own specific license. \n" +"Please read carefully and comply with such specific licenses before \n" +"you use or redistribute the said components. \n" +"Such licenses will in general prevent the transfer, duplication \n" +"(except for backup purposes), redistribution, reverse engineering, \n" +"de-assembly, de-compilation or modification of the component. \n" +"Any breach of agreement will immediately terminate your rights under \n" +"the specific license. Unless the specific license terms grant you such\n" +"rights, you usually cannot install the programs on more than one\n" +"system, or adapt it to be used on a network. In doubt, please contact \n" +"directly the distributor or editor of the component. \n" +"Transfer to third parties or copying of such components including the \n" +"documentation is usually forbidden.\n" +"\n" +"\n" +"All rights to the components of the next CD media belong to their \n" +"respective authors and are protected by intellectual property and \n" +"copyright laws applicable to software programs.\n" msgstr "" -"ви ма╓те один великий дисковий \n" -"п╕дрозд╕л типу FAT (який в основному\n" -"використову╓ться системами MicroSoft \n" -"Dos/Windows). Рекомендовано спершу \n" -"зменшити розм╕р цього розд╕лу (клацн╕ть \n" -"на ньому, ╕ пот╕м клацн╕ть на \"Зм╕нити розм╕р\")" - -#: ../../diskdrake/hd_gtk.pm:1 -#, c-format -msgid "Choose action" -msgstr "Вибер╕ть д╕ю" +"\n" +"Будь ласка, уважно прочитайте умови подан╕ дал╕. Якщо ви не\n" +"погоджу╓тесь з будь-якою частиною, вам не дозволя╓ться встановлювати\n" +"наступний компакт-диск. Натисн╕ть на В╕дмовитися для того, щоб\n" +"продовжити установку без використання цього нос╕я.\n" +"\n" +"Деяк╕ компоненти на наступному компакт-диску не керуються л╕ценз╕╓ю\n" +"GPL чи под╕бною до не╖. В такому випадку кожен ╕з компонент╕в\n" +"керу╓ться сво╓ю специф╕чною л╕ценз╕╓ю. Будь ласка, прочитайте уважно ╕\n" +"дотримуйтесь умов тако╖ специф╕чно╖ л╕ценз╕╖ перш, н╕ж користуватися\n" +"або перерозповсюджувати таку компоненту. Так╕ л╕ценз╕╖ у б╕льшост╕\n" +"випадк╕в забороняють передачу, коп╕ювання (кр╕м створення резервно╖\n" +"коп╕╖), перерозповсюдження, зворотню ╕нженер╕ю, де-асемблювання,\n" +"де-комп╕ляц╕ю чи модиф╕кац╕ю компоненти. Будь-яке порушення л╕ценз╕╖\n" +"негайно припиня╓ ваш╕ права щодо компоненти. Якщо специф╕чно не\n" +"вказано про надання таких прав, ви не ма╓те права встановлювати ц╕\n" +"програми на б╕льш, н╕ж одн╕й систем╕, або пристосовувати ╖х для\n" +"установки в мереж╕. Якщо ви ма╓те сумн╕ви щодо л╕ценз╕╖, зверн╕ться\n" +"безпосередньо до дистриб'ютора чи редактора тако╖ компоненти. Передача\n" +"таких компонент (включаючи документац╕ю) трет╕м особам у б╕льшост╕\n" +"випадк╕в заборонена. \n" +"\n" +"Вс╕ авторськ╕ права компонент на наступному компакт-диску застережен╕\n" +"за ╖х в╕дпов╕дними авторами ╕ захищаються законами про охорону\n" +"авторських прав, як╕ мають право застосовуватися до програмних\n" +"продукт╕в.\n" -#: ../../diskdrake/hd_gtk.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Wizard" -msgstr "Пом╕чник" +msgid "Remove this printer from Star Office/OpenOffice.org/GIMP" +msgstr "" -#: ../../diskdrake/hd_gtk.pm:1 +#: ../../services.pm:1 #, c-format msgid "" -"If you plan to use aboot, be carefull to leave a free space (2048 sectors is " -"enough)\n" -"at the beginning of the disk" +"Linux Virtual Server, used to build a high-performance and highly\n" +"available server." msgstr "" -"Якщо ви збира╓тесь користуватися aboot, не забудьте залишити в╕льний\n" -"розд╕л (достатньо 2048 сектор╕в) на початку диску" +"Linux Virtual Server використову╓ться для побудови високонад╕йного\n" +"сервера з високою продуктивн╕стю." -#: ../../diskdrake/hd_gtk.pm:1 +#: ../../Xconfig/resolution_and_depth.pm:1 #, c-format -msgid "Please make a backup of your data first" -msgstr "Будь-ласка, створ╕ть спочатку резерну коп╕ю Ваших даних" +msgid "4 billion colors (32 bits)" +msgstr "4 м╕льйярди кольор╕в (32 б╕т)" -#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Read carefully!" -msgstr "Читайте уважно!" +msgid "Micronesia" +msgstr "М╕кронез╕я" -#: ../../diskdrake/interactive.pm:1 +#: ../../steps.pm:1 #, c-format -msgid "Encryption key (again)" +msgid "License" msgstr "" -#: ../../diskdrake/interactive.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Encryption key" +msgid "This may take a moment to generate the keys." msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, fuzzy, c-format -msgid "The encryption keys do not match" -msgstr "Парол╕ р╕зн╕" - -#: ../../diskdrake/interactive.pm:1 -#, fuzzy, c-format -msgid "This encryption key is too simple (must be at least %d characters long)" +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)" msgstr "" -"Цей пароль занадто простий (в╕н повинен бути хоча б %d л╕тер завдовжки)" -#: ../../diskdrake/interactive.pm:1 +#: ../../network/adsl.pm:1 #, c-format -msgid "Choose your filesystem encryption key" +msgid "Sagem (using pppoa) usb" msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, fuzzy, c-format -msgid "Filesystem encryption key" -msgstr "Тип п╕дрозд╕лу: " - -#: ../../diskdrake/interactive.pm:1 +#: ../../install_any.pm:1 #, c-format -msgid "Type: " -msgstr "Тип: " +msgid "" +"An error occurred - no valid devices were found on which to create new " +"filesystems. Please check your hardware for the cause of this problem" +msgstr "" +"Сталася помилка - не знайдено в╕дпов╕дних диск╕в для створення новихфайлових " +"систем. Перев╕рте будь-ласка свою систему ╕ спробуйтев╕дшукати причину цього." -#: ../../diskdrake/interactive.pm:1 +#: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "on channel %d id %d\n" -msgstr "на шин╕ %d id %d\n" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Partition table type: %s\n" -msgstr "Тип таблиц╕ п╕дрозд╕л╕в: %s\n" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "LVM-disks %s\n" -msgstr "Диски LVM %s\n" +msgid "Starting the printing system at boot time" +msgstr "Яку систему друку Ви хочете використовувати?" -#: ../../diskdrake/interactive.pm:1 +#: ../../network/netconnect.pm:1 #, c-format -msgid "Info: " -msgstr "╤нформац╕я: " +msgid "Do you want to start the connection at boot?" +msgstr "Чи Ви хочете в╕дкривати з'╓днання при завантаженн╕ системи?" -#: ../../diskdrake/interactive.pm:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "Geometry: %s cylinders, %s heads, %s sectors\n" -msgstr "Геометр╕я: %s цил╕ндр╕в, %s головок, %s сектор╕в\n" +msgid "Processor ID" +msgstr "" -#: ../../diskdrake/interactive.pm:1 +#: ../../harddrake/sound.pm:1 #, c-format -msgid "Size: %s\n" -msgstr "Розм╕р: %s\n" +msgid "Sound trouble shooting" +msgstr "" -#: ../../diskdrake/interactive.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Read-only" -msgstr "" +msgid "Polish (qwerty layout)" +msgstr "Польська (розкладка qwerty)" -#: ../../diskdrake/interactive.pm:1 +#: ../../standalone/drakconnect:1 #, c-format -msgid "Device: " -msgstr "Пристр╕й: " +msgid "activate now" +msgstr "актив╕зувати зараз" -#: ../../diskdrake/interactive.pm:1 +#: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" -"This special Bootstrap\n" -"partition is for\n" -"dual-booting your system.\n" -msgstr "" +"Drakbackup activities via CD:\n" "\n" -"Це спец╕альний п╕дрозд╕л для \n" -"можливост╕ подв╕йного \n" -"завантаження системи.\n" +msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, fuzzy, c-format +#: ../../printer/printerdrake.pm:1 +#, c-format msgid "" +"You are about to install the printing system %s on a system running in the %" +"s security level.\n" "\n" -"Chances are, this partition is\n" -"a Driver partition. You should\n" -"probably leave it alone.\n" -msgstr "" +"This printing system runs a daemon (background process) which waits for " +"print jobs and handles them. This daemon is also accessable by remote " +"machines through the network and so it is a possible point for attacks. " +"Therefore only a few selected daemons are started by default in this " +"security level.\n" "\n" -"Можливо цей п╕дрозд╕л ╓ п╕дрозд╕лом\n" -"драйвера, вам мабуть не потр╕бно\n" -"його зм╕нювати.\n" +"Do you really want to configure printing on this machine?" +msgstr "" -#: ../../diskdrake/interactive.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Loopback file name: %s" -msgstr "Назви файл╕в зворотнього монтування: %s" +msgid "Host \"%s\", port %s" +msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format -msgid "RAID-disks %s\n" -msgstr "Диски RAID %s\n" +msgid "This partition can't be used for loopback" +msgstr "Цей п╕дрозд╕л не може використовуватися для зворотнього монтування" #: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Chunk size %s\n" -msgstr "Розм╕р д╕лянки %s\n" +msgid "File already exists. Use it?" +msgstr "Файл вже ╕сну╓. Користуватися ним?" -#: ../../diskdrake/interactive.pm:1 +#: ../../standalone/net_monitor:1 #, c-format -msgid "Level %s\n" -msgstr "Р╕вень %s\n" +msgid "received: " +msgstr "" -#: ../../diskdrake/interactive.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "" -"Partition booted by default\n" -" (for MS-DOS boot, not for lilo)\n" +msgid "Right Alt key" msgstr "" -"П╕дрозд╕л, який буде використовуватися для завантаження системи\n" -" (для завантаження ДОСу, не для lilo)\n" -#: ../../diskdrake/interactive.pm:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "" -"Loopback file(s):\n" -" %s\n" +msgid "the list of alternative drivers for this sound card" msgstr "" -"Файл(и) зворотнього монтування: \n" -" %s\n" -#: ../../diskdrake/interactive.pm:1 +#: ../../standalone/drakconnect:1 #, c-format -msgid "RAID md%s\n" -msgstr "RAID md%s\n" +msgid "Gateway" +msgstr "Шлюз" -#: ../../diskdrake/interactive.pm:1 +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "Scanner sharing" +msgstr "Друк" + +#: ../../lang.pm:1 #, c-format -msgid "Mounted\n" -msgstr "Змонтований\n" +msgid "Tonga" +msgstr "Тонга" -#: ../../diskdrake/interactive.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Not formatted\n" -msgstr "Не форматований\n" +msgid "Tunisia" +msgstr "Тун╕с" -#: ../../diskdrake/interactive.pm:1 +#: ../../standalone/drakconnect:1 #, c-format -msgid "Formatted\n" -msgstr "Форматований\n" +msgid "Profile: " +msgstr "Проф╕ль: " -#: ../../diskdrake/interactive.pm:1 -#, fuzzy, c-format -msgid "Cylinder %d to %d\n" -msgstr "В╕д цил╕ндру %d до цил╕ндру %d \n" +#: ../../standalone/harddrake2:1 +#, c-format +msgid "" +"Click on a device in the left tree in order to display its information here." +msgstr "" -#: ../../diskdrake/interactive.pm:1 +#: ../../standalone/drakxtv:1 #, c-format -msgid ", %s sectors" -msgstr ", %s сектор╕в" +msgid "XawTV isn't installed!" +msgstr "" -#: ../../diskdrake/interactive.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Size: %s" -msgstr "Розм╕р: %s" +msgid "" +"Create/Transfer\n" +"backup keys for SSH" +msgstr "" -#: ../../diskdrake/interactive.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Start: sector %s\n" -msgstr "Початок: сектор %s\n" +msgid "Do not include critical files (passwd, group, fstab)" +msgstr "" -#: ../../diskdrake/interactive.pm:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "Name: " -msgstr "Назва: " +msgid "old static device name used in dev package" +msgstr "" -#: ../../diskdrake/interactive.pm:1 +#: ../../any.pm:1 #, c-format -msgid "DOS drive letter: %s (just a guess)\n" -msgstr "Л╕тера в ДОС╕: %s (припущення)\n" +msgid "This label is already used" +msgstr "Ця етикетка вже використову╓ться" -#: ../../diskdrake/interactive.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "partition %s is now known as %s" +msgid "" +"\n" +"Welcome to the Printer Setup Wizard\n" +"\n" +"This wizard will help you to install your printer(s) connected to this " +"computer or connected directly to the network.\n" +"\n" +"If you have printer(s) connected to this machine, Please plug it/them in on " +"this computer and turn it/them on so that it/they can be auto-detected. Also " +"your network printer(s) must be connected and turned on.\n" +"\n" +"Note that auto-detecting printers on the network takes longer than the auto-" +"detection of only the printers connected to this machine. So turn off the " +"auto-detection of network printers when you don't need it.\n" +"\n" +" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " +"to set up your printer(s) now." msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, fuzzy, c-format -msgid "Removing %s" -msgstr "Видалення LPD..." - #: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Copying %s" +msgid "After formatting partition %s, all data on this partition will be lost" msgstr "" +"П╕сля форматування п╕дрозд╕лу %s, вс╕ дан╕ на цьому п╕дрозд╕л╕ \n" +"будуть втрачен╕" -#: ../../diskdrake/interactive.pm:1 +#: ../../standalone/net_monitor:1 #, fuzzy, c-format -msgid "Moving files to the new partition" -msgstr "Недостатньо в╕льного простору для нових п╕дрозд╕л╕в" +msgid "Connection Time: " +msgstr "Тип зв'язку:" -#: ../../diskdrake/interactive.pm:1 +#: ../../standalone/drakperm:1 #, c-format +msgid "select perm file to see/edit" +msgstr "" + +#: ../../standalone/livedrake:1 +#, fuzzy, c-format msgid "" -"Directory %s already contains data\n" -"(%s)" +"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n" +"If you don't have it, press Cancel to avoid live upgrade." msgstr "" +"Будь-ласка, вставте компакт-диск, позначений \"%s\" у пристр╕й ╕\n" +"натисн╕ть Гаразд п╕сля цього.\n" +"\n" +"Якщо Ви не ма╓те такого диску, натисн╕ть В╕дм╕нити, щоб не\n" +"встановлювати з цього диску." -#: ../../diskdrake/interactive.pm:1 +#: ../../standalone/drakperm:1 #, fuzzy, c-format -msgid "Hide files" -msgstr "зб╕й у mkraid" +msgid "Use group id for execution" +msgstr "Користуватися автовизначенням" -#: ../../diskdrake/interactive.pm:1 +#: ../../any.pm:1 +#, c-format +msgid "Choose the default user:" +msgstr "Вибер╕ть стандартного користувача:" + +#: ../../lang.pm:1 +#, c-format +msgid "Gabon" +msgstr "╫абон" + +#: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "Move files to the new partition" -msgstr "Недостатньо в╕льного простору для нових п╕дрозд╕л╕в" +msgid "" +"\n" +"Printers on remote CUPS servers do not need to be configured here; these " +"printers will be automatically detected." +msgstr "" +"\n" +"Для в╕ддаленого сервера CUPS Вам не потр╕бно конф╕╜урувати принтер╕в,\n" +"вс╕ принтери будуть автоматично визначен╕. Якщо Ви сумн╕ва╓тесь,\n" +"вибер╕ть \"В╕ддалений сервер CUPS\"." -#: ../../diskdrake/interactive.pm:1 +#: ../../any.pm:1 #, c-format -msgid "After formatting partition %s, all data on this partition will be lost" +msgid "" +"Mandrake Linux can support multiple languages. Select\n" +"the languages you would like to install. They will be available\n" +"when your installation is complete and you restart your system." msgstr "" -"П╕сля форматування п╕дрозд╕лу %s, вс╕ дан╕ на цьому п╕дрозд╕л╕ \n" -"будуть втрачен╕" +"Ви можете вибрати також ╕нш╕ мови, як╕ будуть доступн╕ в систем╕ п╕сля\n" +"установки" -#: ../../diskdrake/interactive.pm:1 +#: ../../diskdrake/smbnfs_gtk.pm:1 +#, fuzzy, c-format +msgid "Domain" +msgstr "Домен NIS" + +#: ../../any.pm:1 #, c-format -msgid "You'll need to reboot before the modification can take place" -msgstr "Щоб зм╕ни почали д╕яти Вам сл╕д перевантажити комп'ютер" +msgid "Precise RAM size if needed (found %d MB)" +msgstr "Точний об'╓м пам'ят╕ (RAM). Знайдено %d Мб" -#: ../../diskdrake/interactive.pm:1 +#: ../../help.pm:1 #, c-format -msgid "Partition table of drive %s is going to be written to disk!" -msgstr "Таблиця п╕дрозд╕л╕в диску %s буде записано на диск" +msgid "" +"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n" +"automated. DrakX will analyze the disk boot sector and act according to\n" +"what it finds there:\n" +"\n" +" * if a Windows boot sector is found, it will replace it with a grub/LILO\n" +"boot sector. This way you will be able to load either GNU/Linux or another\n" +"OS.\n" +"\n" +" * if a grub or LILO boot sector is found, it will replace it with a new\n" +"one.\n" +"\n" +"If it cannot make a determination, DrakX will ask you where to place the\n" +"bootloader." +msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, fuzzy, c-format -msgid "The package %s is needed. Install it?" -msgstr "Як╕ пакети Ви хочете встановити?" +#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 +#, c-format +msgid "Provider dns 2 (optional)" +msgstr "2й DNS провайдера (необов'язково)" -#: ../../diskdrake/interactive.pm:1 +#: ../../any.pm:1 ../../help.pm:1 #, c-format -msgid "What type of partitioning?" -msgstr "Тип п╕дрозд╕л╕в?" +msgid "Boot device" +msgstr "Пристр╕й завантаження" -#: ../../diskdrake/interactive.pm:1 +#: ../../install_interactive.pm:1 #, c-format -msgid "Be careful: this operation is dangerous." -msgstr "Обережно: ця операц╕я небезпечна." +msgid "Which partition do you want to resize?" +msgstr "Розм╕р якого п╕дрозд╕лу ви хочете зм╕нити?" + +#: ../../lang.pm:1 +#, c-format +msgid "United States Minor Outlying Islands" +msgstr "Острови Сполучених Штат╕в Америки" -#: ../../diskdrake/interactive.pm:1 +#: ../../standalone/logdrake:1 #, c-format -msgid "chunk size" -msgstr "розм╕р д╕лянки" +msgid "A tool to monitor your logs" +msgstr "Зас╕б доглядання Ваших журнальних файл╕в" -#: ../../diskdrake/interactive.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "level" -msgstr "р╕вень" +msgid "Djibouti" +msgstr "Джибут╕" -#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1 +#: ../../network/netconnect.pm:1 #, c-format -msgid "device" -msgstr "пристр╕й" +msgid "detected on port %s" +msgstr "знайдено на порту %s" -#: ../../diskdrake/interactive.pm:1 +#: ../../printer/data.pm:1 #, c-format -msgid "Various" -msgstr "Р╕зноман╕тне" +msgid "LPD" +msgstr "LPD" -#: ../../diskdrake/interactive.pm:1 +#: ../../Xconfig/various.pm:1 #, c-format -msgid "Mount options" -msgstr "Параметри монтування:" +msgid "Graphics card: %s\n" +msgstr "В╕део плата: %s\n" -#: ../../diskdrake/interactive.pm:1 +#: ../../bootloader.pm:1 #, c-format -msgid "File already exists. Use it?" -msgstr "Файл вже ╕сну╓. Користуватися ним?" +msgid "Yaboot" +msgstr "Yaoot" -#: ../../diskdrake/interactive.pm:1 +#: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "File is already used by another loopback, choose another one" -msgstr "" -"╤нший пристр╕й зворотнього монтування вже користу╓ться цим\n" -"файлом. Вибер╕ть ╕нший." +msgid "Please check if you are using a DVDRAM device" +msgstr "Клацн╕ть, будь-ласка, на п╕дрозд╕л╕" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Give a file name" -msgstr "Дайте назву файлу" +#: ../../standalone/drakboot:1 +#, fuzzy, c-format +msgid "Splash selection" +msgstr "Зберегти виб╕р пакет╕в" -#: ../../diskdrake/interactive.pm:1 +#: ../../partition_table.pm:1 #, c-format -msgid "Filesystem type: " -msgstr "Тип п╕дрозд╕лу: " +msgid "Extended partition not supported on this platform" +msgstr "Розширен╕ п╕дрозд╕ли не п╕дтримуються на ц╕й платформ╕." -#: ../../diskdrake/interactive.pm:1 +#: ../../network/isdn.pm:1 #, c-format -msgid "Size in MB: " -msgstr "Розм╕р (Мб): " +msgid "ISDN Configuration" +msgstr "Конф╕╜урац╕я ISDN" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Loopback file name: " -msgstr "Назва файлу зворотнього монтування: " +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "high" +msgstr "Високий" -#: ../../diskdrake/interactive.pm:1 +#: ../../standalone/drakgw:1 #, c-format -msgid "Loopback" -msgstr "Зворотн╓ монтування" +msgid "Internet Connection Sharing" +msgstr "Сп╕льне використанн з'╓днання з ╕нтернетом" -#: ../../diskdrake/interactive.pm:1 +#: ../../standalone/logdrake:1 #, c-format -msgid "This partition can't be used for loopback" -msgstr "Цей п╕дрозд╕л не може використовуватися для зворотнього монтування" +msgid "Choose file" +msgstr "Вибер╕ть файл" -#: ../../diskdrake/interactive.pm:1 +#: ../../network/shorewall.pm:1 #, c-format -msgid "LVM name?" -msgstr "Назва LVM?" +msgid "" +"Warning! An existing firewalling configuration has been detected. You may " +"need some manual fixes after installation." +msgstr "" +"Увага! Знайдена ╕снуюча конф╕╜урац╕я firewall. Можливо Вам потр╕бно\n" +"буде виконати деяк╕ зм╕ни п╕сля установки." -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "new" -msgstr "новий" +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Printing/Photo Card Access on \"%s\"" +msgstr "Вимикаю мережу" -#: ../../diskdrake/interactive.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Choose an existing LVM to add to" -msgstr "Вибер╕ть ╕снуючий LVM, до якого додати" +msgid "" +"Do you want to enable printing on the printers mentioned above or on " +"printers in the local network?\n" +msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Choose an existing RAID to add to" -msgstr "Вибер╕ть ╕снуючий RAID, до якого додати" +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Printer default settings" +msgstr "Виб╕р модел╕ принтера" -#: ../../diskdrake/interactive.pm:1 +#: ../../mouse.pm:1 #, c-format -msgid "Moving partition..." -msgstr "Перем╕щаю п╕дрозд╕л..." +msgid "Generic PS2 Wheel Mouse" +msgstr "Звичайний тип PS2 миш╕ з кол╕щатком" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Moving" -msgstr "Перем╕щення" +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Removing old printer \"%s\"..." +msgstr "Стираю дан╕ старого принтера \"%s\" ..." -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Which sector do you want to move it to?" -msgstr "На який сектор перем╕ститися?" +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "Select a device !" +msgstr "Вибер╕ть граф╕чну плату" -#: ../../diskdrake/interactive.pm:1 +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Remove selected server" +msgstr "Видалити принтер" + +#: ../../lang.pm:1 #, c-format -msgid "Sector" -msgstr "Сектор" +msgid "French Southern Territories" +msgstr "Французьк╕ П╕вденн╕ Територ╕╖" -#: ../../diskdrake/interactive.pm:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "Which disk do you want to move it to?" -msgstr "На який диск ви хочете перем╕ститися?" +msgid "the vendor name of the processor" +msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Move" -msgstr "Перем╕стити" +msgid "All data on this partition should be backed-up" +msgstr "Потр╕бно зберегти вс╕ дан╕ на цьому п╕дрозд╕л╕" -#: ../../diskdrake/interactive.pm:1 +#: ../../install_steps_gtk.pm:1 #, c-format -msgid "New size in MB: " -msgstr "Новий розм╕р (Мб): " +msgid "Installing package %s" +msgstr "Установка пакету %s" -#: ../../diskdrake/interactive.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Choose the new size" -msgstr "Вибер╕ть новий розм╕р" +msgid "Checking device and configuring HPOJ..." +msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Resize" -msgstr "Зм╕нити розм╕р" +msgid "" +"To have more partitions, please delete one to be able to create an extended " +"partition" +msgstr "" +"Щоб мати б╕льше п╕дрозд╕л╕в, з╕тр╕ть один ╕з тих, що ╓. П╕сля цього\n" +"ви можете створити зам╕сть нього к╕лька розширених п╕дрозд╕л╕в" -#: ../../diskdrake/interactive.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "After resizing partition %s, all data on this partition will be lost" +msgid "" +"Your printer was configured automatically to give you access to the photo " +"card drives from your PC. Now you can access your photo cards using the " +"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> " +"\"MTools File Manager\") or the command line utilities \"mtools\" (enter " +"\"man mtools\" on the command line for more info). You find the card's file " +"system under the drive letter \"p:\", or subsequent drive letters when you " +"have more than one HP printer with photo card drives. In \"MtoolsFM\" you " +"can switch between drive letters with the field at the upper-right corners " +"of the file lists." msgstr "" -"П╕сля зм╕ни розм╕ру п╕дрозд╕лу %s, вс╕ дан╕ на цьому п╕дрозд╕л╕ будуть\n" -"втрачен╕" -#: ../../diskdrake/interactive.pm:1 +#: ../../steps.pm:1 #, c-format -msgid "All data on this partition should be backed-up" -msgstr "Потр╕бно зберегти вс╕ дан╕ на цьому п╕дрозд╕л╕" +msgid "Choose packages to install" +msgstr "Виб╕р пакет╕в" -#: ../../diskdrake/interactive.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "This partition is not resizeable" -msgstr "Розм╕р цього п╕дрозд╕лу неможливо зм╕нити" +msgid "" +"\n" +" Some errors during sendmail are caused by \n" +" a bad configuration of postfix. To solve it you have to\n" +" set myhostname or mydomain in /etc/postfix/main.cf\n" +"\n" +msgstr "" -#: ../../diskdrake/interactive.pm:1 +#: ../../install_interactive.pm:1 #, c-format -msgid "Computing FAT filesystem bounds" -msgstr "Обчислюю меж╕ п╕дрозд╕лу FAT" +msgid "ALL existing partitions and their data will be lost on drive %s" +msgstr "ВС╤ ╕снуюч╕ п╕дрозд╕ли та вс╕ дан╕ на диску %s будуть втрачен╕" -#: ../../diskdrake/interactive.pm:1 +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "" +"Your system does not have enough space left for installation or upgrade (%d " +"> %d)" +msgstr "" +"У Ваш╕й систем╕ не залишилось достатньо в╕льного м╕сця для установки\n" +"чи поновлення (%d > %d )" + +#: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "Where do you want to mount %s?" -msgstr "Де ви хочете змонтувати пристр╕й %s?" +msgid "" +"Every printer needs a name (for example \"printer\"). The Description and " +"Location fields do not need to be filled in. They are comments for the users." +msgstr "" +"Кожному принтеру повинна в╕дпов╕дати назва (наприклад lp).\n" +"Поля Опис та Розташування заповнювати необов'язково. Вони ╓\n" +"лиш коментарями для користувач╕в." -#: ../../diskdrake/interactive.pm:1 +#: ../../help.pm:1 #, c-format msgid "" -"Can't unset mount point as this partition is used for loop back.\n" -"Remove the loopback first" +"\"%s\": clicking on the \"%s\" button will open the printer configuration\n" +"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n" +"information on how to setup a new printer. The interface presented there is\n" +"similar to the one used during installation." msgstr "" -"Не можу зм╕нити точку монтування даного розд╕лу, оск╕льки в╕н\n" -"використову╓ться для зворотнього монтування. Спочатку в╕дм╕н╕ть\n" -"зворотн╓ монтування." -#: ../../diskdrake/interactive.pm:1 +#: ../../lang.pm:1 +#, c-format +msgid "Bhutan" +msgstr "Бутан" + +#: ../../standalone/drakgw:1 +#, c-format +msgid "Network interface" +msgstr "╤нтерфейс мереж╕" + +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Where do you want to mount device %s?" -msgstr "Де ви хочете змонтувати пристр╕й %s?" - -#: ../../diskdrake/interactive.pm:1 -#, fuzzy, c-format -msgid "Where do you want to mount the loopback file %s?" -msgstr "Де ви хочете змонтувати файл зворонього монтування %s?" +msgid "Reading printer data..." +msgstr "Читаю дан╕ принтер╕в ..." -#: ../../diskdrake/interactive.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Switching from ext2 to ext3" -msgstr "Перемикаюсь з ext2 на ext3" +msgid "Korean keyboard" +msgstr "Корейська клав╕атура" -#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 +#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format -msgid "Which filesystem do you want?" -msgstr "Яку файлову систему ви вибира╓те?" +msgid "Not connected" +msgstr "Нема╓ з'╓днання" -#: ../../diskdrake/interactive.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Change partition type" -msgstr "Зм╕нити тип п╕дрозд╕лу" +msgid "Greek" +msgstr "Грецька" -#: ../../diskdrake/interactive.pm:1 +#: ../../security/help.pm:1 #, c-format msgid "" -"After changing type of partition %s, all data on this partition will be lost" +"Arguments: (arg)\n" +"\n" +"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg" +"\\fP = NONE no issues are\n" +"allowed else only /etc/issue is allowed." msgstr "" -"П╕сля зм╕ни типу п╕дрозд╕лу диску %s, вс╕ дан╕ на цьому п╕дрозд╕л╕ \n" -"будуть втрачен╕" -#: ../../diskdrake/interactive.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Remove the loopback file?" -msgstr "Стертифайлу зворотнього монтування?" +msgid "Saint Kitts and Nevis" +msgstr "Св. К╕тс ╕ Нев╕с" -#: ../../diskdrake/interactive.pm:1 +#: ../../standalone/drakbackup:1 #, c-format msgid "" -"You can't create a new partition\n" -"(since you reached the maximal number of primary partitions).\n" -"First remove a primary partition and create an extended partition." +"Transfer successful\n" +"You may want to verify you can login to the server with:\n" +"\n" +"ssh -i %s %s\\@%s\n" +"\n" +"without being prompted for a password." msgstr "" -#: ../../diskdrake/interactive.pm:1 +#: ../../any.pm:1 #, c-format -msgid "Preference: " -msgstr "Установки: " +msgid "Enable OF Boot?" +msgstr "Дозволити завантаження OF?" -#: ../../diskdrake/interactive.pm:1 +#: ../../fsedit.pm:1 #, c-format -msgid "Start sector: " -msgstr "Початок (сектор): " +msgid "You can't use JFS for partitions smaller than 16MB" +msgstr "JFS не можна користуватися на п╕дрозд╕лах розм╕ром менше 16Мб." -#: ../../diskdrake/interactive.pm:1 +#: ../../Xconfig/various.pm:1 #, c-format -msgid "Create a new partition" -msgstr "Створити новий розд╕л" +msgid "Monitor VertRefresh: %s\n" +msgstr "Частота вертикально╖ розгортки мон╕тора: %s\n" -#: ../../diskdrake/interactive.pm:1 +#: ../../standalone/drakperm:1 #, c-format -msgid "Use for loopback" -msgstr "Використовувати для зворотнього монтування" +msgid "path" +msgstr "" -#: ../../diskdrake/interactive.pm:1 +#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 +#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 #, c-format -msgid "Modify RAID" -msgstr "Зм╕нити RAID" +msgid "Mount point" +msgstr "Точка монтування" -#: ../../diskdrake/interactive.pm:1 +#: ../../Xconfig/test.pm:1 #, c-format -msgid "Remove from LVM" -msgstr "Видалити з LVM" +msgid "" +"An error occurred:\n" +"%s\n" +"Try to change some parameters" +msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Remove from RAID" -msgstr "Видалити з RAID" +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Restore system" +msgstr "Встановити систему" -#: ../../diskdrake/interactive.pm:1 +#: ../../standalone/scannerdrake:1 #, c-format -msgid "Add to LVM" -msgstr "Додати до LVM" +msgid "" +"These are the machines on which the locally connected scanner(s) should be " +"available:" +msgstr "" -#: ../../diskdrake/interactive.pm:1 +#: ../../standalone/drakpxe:1 #, c-format -msgid "Add to RAID" -msgstr "Додати до RAID" +msgid "The DHCP end ip" +msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Format" -msgstr "Форматувати" +#: ../../diskdrake/smbnfs_gtk.pm:1 +#, fuzzy, c-format +msgid "Another one" +msgstr "╤нтернет" -#: ../../diskdrake/interactive.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Detailed information" -msgstr "Детальна ╕нформац╕я" +msgid "Drakbackup" +msgstr "" -#: ../../diskdrake/interactive.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Trying to rescue partition table" -msgstr "Пробую в╕дновити таблицю п╕дрозд╕л╕в" +msgid "Colombia" +msgstr "Колумб╕я" -#: ../../diskdrake/interactive.pm:1 +#: ../../standalone/drakgw:1 #, c-format msgid "" -"Insert a floppy in drive\n" -"All data on this floppy will be lost" +"Current configuration of `%s':\n" +"\n" +"Network: %s\n" +"IP address: %s\n" +"IP attribution: %s\n" +"Driver: %s" msgstr "" -"Вставте дискету в дисков╕д\n" -"Вс╕ дан╕ на ц╕й дискет╕ будуть втрачен╕" - -#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1 -#: ../../network/modem.pm:1 -#, c-format -msgid "Warning" -msgstr "Попередження" - -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Select file" -msgstr "Вибер╕ть файл" -#: ../../diskdrake/interactive.pm:1 +#: ../../Xconfig/monitor.pm:1 #, c-format -msgid "" -"The backup partition table has not the same size\n" -"Still continue?" +msgid "Plug'n Play" msgstr "" -"Авар╕йна таблиця п╕дрозд╕л╕в ма╓ ╕нший розм╕р\n" -"Продовжувати?" -#: ../../diskdrake/interactive.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Removable media automounting" -msgstr "Автоматичне монтування зм╕нних нос╕╖в" +msgid "Reunion" +msgstr "Рен╕он" -#: ../../diskdrake/interactive.pm:1 +#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1 +#: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format -msgid "Reload partition table" -msgstr "Прочитати таблицю п╕дрозд╕л╕в" +msgid "Details" +msgstr "Подробиц╕" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Rescue partition table" -msgstr "Авар╕йна таблиця п╕дрозд╕л╕в" +#: ../../network/tools.pm:1 +#, fuzzy, c-format +msgid "For security reasons, it will be disconnected now." +msgstr "З точки зору безпеки, ви будете зараз в╕д'╓днан╕." -#: ../../diskdrake/interactive.pm:1 +#: ../../standalone/drakbug:1 #, c-format -msgid "Restore partition table" -msgstr "В╕дновити таблицю п╕дрозд╕л╕в" +msgid "Synchronization tool" +msgstr "" -#: ../../diskdrake/interactive.pm:1 +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Checking your system..." +msgstr "Яку систему друку Ви хочете використовувати?" + +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Save partition table" -msgstr "Записати таблицю п╕дрозд╕л╕в" +msgid "Print" +msgstr "Друк" -#: ../../diskdrake/interactive.pm:1 +#: ../../standalone/drakbackup:1 #, c-format msgid "" -"To have more partitions, please delete one to be able to create an extended " -"partition" +"Insert the tape with volume label %s\n" +" in the tape drive device %s" msgstr "" -"Щоб мати б╕льше п╕дрозд╕л╕в, з╕тр╕ть один ╕з тих, що ╓. П╕сля цього\n" -"ви можете створити зам╕сть нього к╕лька розширених п╕дрозд╕л╕в" -#: ../../diskdrake/interactive.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "I can't add any more partition" -msgstr "Не можу додати жодного п╕дрозд╕лу" +msgid "Mongolia" +msgstr "Монгол╕я" #: ../../diskdrake/interactive.pm:1 #, c-format -msgid "All primary partitions are used" -msgstr "Вс╕ основн╕ п╕дрозд╕ли зайнят╕" +msgid "Mounted\n" +msgstr "Змонтований\n" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Hard drive information" -msgstr "╤нформац╕я жорсткого диску" +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "Graphical Interface" +msgstr "Стартувати X автоматично" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Auto allocate" -msgstr "Автоматично розпод╕лити" +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Restore Users" +msgstr "В╕дновити з файлу" -#: ../../diskdrake/interactive.pm:1 +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Encryption key for %s" +msgstr "Парол╕ р╕зн╕" + +#: ../../services.pm:1 #, c-format -msgid "Clear all" -msgstr "Очистити все" +msgid "" +"The portmapper manages RPC connections, which are used by\n" +"protocols such as NFS and NIS. The portmap server must be running on " +"machines\n" +"which act as servers for protocols which make use of the RPC mechanism." +msgstr "" +"portmapper керу╓ з'╓днаннями з протоколом RPC, як╕ використовуються\n" +"такими протоколами, як NFS та NIS. portmaper повинен працювати на\n" +"машинах, як╕ ╓ серверами для протокол╕в, що користуються RPC." -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Do you want to save /etc/fstab modifications" -msgstr "Чи ви хочете записати конф╕╜урац╕ю /etc/fstab?" +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "Detected hardware" +msgstr "Перегляньте ╕нформац╕ю про апаратне забезпечення" -#: ../../diskdrake/interactive.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Quit without writing the partition table?" -msgstr "Вийти без запису таблиц╕ п╕дрозд╕л╕в?" +msgid "Mauritius" +msgstr "Маврик╕й" -#: ../../diskdrake/interactive.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Quit without saving" -msgstr "Вийти без запису" +msgid "Myanmar (Burmese)" +msgstr "" -#: ../../diskdrake/interactive.pm:1 -#, c-format -msgid "Continue anyway?" -msgstr "Все-таки продовжувати?" +#: ../../fs.pm:1 +#, fuzzy, c-format +msgid "Enabling swap partition %s" +msgstr "Форматування п╕дрозд╕лу %s" -#: ../../diskdrake/interactive.pm:1 +#: ../../install_interactive.pm:1 +#, fuzzy, c-format +msgid "There is no FAT partition to use as loopback (or not enough space left)" +msgstr "" +"Нема╓ п╕дрозд╕лу FAT для зм╕ни розм╕ру або для використання як пристр╕й " +"зворотнього монтування (або не вистача╓ в╕льного простору)" + +#: ../../keyboard.pm:1 #, c-format -msgid "Toggle to expert mode" -msgstr "Звичайний > Експерт" +msgid "Armenian (old)" +msgstr "В╕рменська (стара)" -#: ../../diskdrake/interactive.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Toggle to normal mode" -msgstr "Експерт > Звичайний" +msgid "" +"A printer named \"%s\" already exists under %s. \n" +"Click \"Transfer\" to overwrite it.\n" +"You can also type a new name or skip this printer." +msgstr "" +"Принтер з назвою \"%s\" вже ╕сну╓ в \"%s\". Натисн╕ть \"Перенести\" щоб\n" +"переписати його визначення. Ви можете також надрукувати нову назву чи\n" +"пропустити цей принтер." -#: ../../diskdrake/interactive.pm:1 +#: ../../share/advertising/12-mdkexpert.pl:1 #, c-format -msgid "Undo" -msgstr "Назад" +msgid "" +"Find the solutions of your problems via MandrakeSoft's online support " +"platform." +msgstr "" -#: ../../diskdrake/interactive.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Exit" -msgstr "Вих╕д" +msgid ", host \"%s\", port %s" +msgstr "" -#: ../../diskdrake/interactive.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Choose a partition" -msgstr "Вибер╕ть п╕дрозд╕л" +msgid "Monaco" +msgstr "Монако" -#: ../../diskdrake/interactive.pm:1 +#: ../../fs.pm:1 #, c-format -msgid "Choose another partition" -msgstr "Створити ╕нший п╕дрозд╕л" +msgid "%s formatting of %s failed" +msgstr "%s форматування %s втрачено" -#: ../../diskdrake/removable.pm:1 +#: ../../install_interactive.pm:1 #, c-format -msgid "Change type" -msgstr "Зм╕нити тип" +msgid "Partitioning failed: %s" +msgstr "Розбиття на п╕дрозд╕ли невдале: %s" -#: ../../diskdrake/smbnfs_gtk.pm:1 +#: ../../standalone/drakxtv:1 #, fuzzy, c-format -msgid "Search servers" -msgstr "Сервер DNS" +msgid "Canada (cable)" +msgstr "Канадська (Квебек)" -#: ../../diskdrake/smbnfs_gtk.pm:1 +#: ../../help.pm:1 #, fuzzy, c-format -msgid "Domain" -msgstr "Домен NIS" +msgid "Upgrade" +msgstr "Поновлення" -#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Username" -msgstr "╤м'я користувача" +#: ../../help.pm:1 +#, c-format +msgid "Workstation" +msgstr "Робоча станц╕я" -#: ../../diskdrake/smbnfs_gtk.pm:1 +#: ../../install_steps_interactive.pm:1 #, c-format msgid "" -"Please enter your username, password and domain name to access this host." +"Installing package %s\n" +"%d%%" msgstr "" +"Встановлюю пакет %s\n" +"%d%%" -#: ../../diskdrake/smbnfs_gtk.pm:1 -#, fuzzy, c-format -msgid "Domain Authentication Required" -msgstr "Автентикац╕я" - -#: ../../diskdrake/smbnfs_gtk.pm:1 -#, fuzzy, c-format -msgid "Another one" -msgstr "╤нтернет" +#: ../../lang.pm:1 +#, c-format +msgid "Kyrgyzstan" +msgstr "Киргизстан" -#: ../../diskdrake/smbnfs_gtk.pm:1 +#: ../../help.pm:1 #, fuzzy, c-format -msgid "Which username" -msgstr "╤м'я користувача" +msgid "With basic documentation" +msgstr "Документац╕я" -#: ../../diskdrake/smbnfs_gtk.pm:1 +#: ../../services.pm:1 #, c-format -msgid "Can't login using username %s (bad password?)" -msgstr "" +msgid "Anacron is a periodic command scheduler." +msgstr "Anacron служить для пер╕одичного виконання команд." -#: ../../harddrake/data.pm:1 +#: ../../install_interactive.pm:1 #, c-format -msgid "cpu # " +msgid "" +"You must have a root partition.\n" +"For this, create a partition (or click on an existing one).\n" +"Then choose action ``Mount point'' and set it to `/'" msgstr "" +"Ви повинн╕ мати п╕дрозд╕л root.\n" +"Для цього створ╕ть новий п╕дрозд╕л (або клацн╕ть на вже\n" +"╕снуючому). П╕сля цього вибер╕ть ``Точка монтування'' ╕ встанов╕ть ╖╖\n" +"в `/'" -#: ../../harddrake/data.pm:1 +#: ../../network/network.pm:1 #, c-format -msgid "SMBus controllers" -msgstr "" +msgid "Proxy should be http://..." +msgstr "Вигляд прокс╕ ма╓ бути http://..." -#: ../../harddrake/data.pm:1 +#: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format -msgid "USB controllers" -msgstr "" +msgid "South Africa" +msgstr "П╕вдена Африка" -#: ../../harddrake/data.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "SCSI controllers" -msgstr "" +msgid "Western Sahara" +msgstr "Зах╕дна Сахара" -#: ../../harddrake/data.pm:1 +#: ../../standalone/drakTermServ:1 #, c-format -msgid "Firewire controllers" +msgid "Etherboot Floppy/ISO" msgstr "" -#: ../../harddrake/data.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "(E)IDE/ATA controllers" -msgstr "" +msgid "Modify printer configuration" +msgstr "Зм╕нити конф╕гурац╕ю принтера" -#: ../../harddrake/data.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Joystick" -msgstr "" - -#: ../../harddrake/data.pm:1 -#, fuzzy, c-format -msgid "Scanner" -msgstr "Вибер╕ть граф╕чну плату" - -#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "Unknown/Others" -msgstr "Загальне" +msgid "Choose a partition" +msgstr "Вибер╕ть п╕дрозд╕л" -#: ../../harddrake/data.pm:1 +#: ../../standalone/drakperm:1 #, c-format -msgid "Bridges and system controllers" +msgid "Edit current rule" msgstr "" -#: ../../harddrake/data.pm:1 -#, fuzzy, c-format -msgid "Modem" -msgstr "Модуль" - -#: ../../harddrake/data.pm:1 -#, fuzzy, c-format -msgid "Ethernetcard" -msgstr "Плата Ethernet" - -#: ../../harddrake/data.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Processors" +msgid "%s" msgstr "" -#: ../../harddrake/data.pm:1 +#: ../../security/help.pm:1 #, c-format -msgid "Webcam" +msgid "" +"Arguments: (arg)\n" +"\n" +"Enable/Disable the logging of IPv4 strange packets." msgstr "" -#: ../../harddrake/data.pm:1 -#, fuzzy, c-format -msgid "Soundcard" -msgstr "Звукова плата" +#: ../../mouse.pm:1 +#, c-format +msgid "Please test the mouse" +msgstr "Випробуйте мишку, будь-ласка" -#: ../../harddrake/data.pm:1 +#: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "Other MultiMedia devices" +msgid "Other Media" msgstr "╤нш╕" -#: ../../harddrake/data.pm:1 +#: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "Tvcard" -msgstr "Телев╕з╕йна плата" +msgid "Backup system files" +msgstr "Поганий резервний файл" -#: ../../harddrake/data.pm:1 -#, fuzzy, c-format -msgid "Videocard" -msgstr "В╕део режим" +#: ../../mouse.pm:1 +#, c-format +msgid "Logitech MouseMan+" +msgstr "Logitech MouseMan+" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Sector" +msgstr "Сектор" + +#: ../../lang.pm:1 +#, c-format +msgid "Qatar" +msgstr "Катар" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "LDAP Base dn" +msgstr "dn на основ╕LDAP " -#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1 +#: ../../install_steps_gtk.pm:1 +#, c-format +msgid "" +"You can't select this package as there is not enough space left to install it" +msgstr "Вибрати цей пакет неможливо. Для його установки не вистача╓ м╕сця." + +#: ../../help.pm:1 #, fuzzy, c-format -msgid "Tape" -msgstr "Тип" +msgid "generate auto-install floppy" +msgstr "Створення автоустановочно╖ дискети" -#: ../../harddrake/data.pm:1 +#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format -msgid "DVD-ROM" -msgstr "" +msgid "Dialing mode" +msgstr "Режим зв'язку через модем" -#: ../../harddrake/data.pm:1 +#: ../../services.pm:1 #, c-format -msgid "CD/DVD burners" +msgid "File sharing" msgstr "" -#: ../../harddrake/data.pm:1 +#: ../../any.pm:1 #, c-format -msgid "CDROM" -msgstr "" - -#: ../../harddrake/data.pm:1 -#, fuzzy, c-format -msgid "Disk" -msgstr "Датська" +msgid "Clean /tmp at each boot" +msgstr "Очищати /tmp при кожному перевантаженн╕" -#: ../../harddrake/data.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Zip" -msgstr "" +msgid "Malawi" +msgstr "Малав╕" -#: ../../harddrake/data.pm:1 +#: ../../install_steps_interactive.pm:1 #, fuzzy, c-format -msgid "Floppy" -msgstr "Записати на дискету" +msgid "Please choose your type of mouse." +msgstr "Який тип миш╕ ви ма╓те?" -#: ../../harddrake/sound.pm:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "Let me pick any driver" +msgid "class of hardware device" msgstr "" -#: ../../harddrake/sound.pm:1 -#, fuzzy, c-format -msgid "Driver:" -msgstr "Драйвер" - -#: ../../harddrake/sound.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format msgid "" -"If you really think that you know which driver is the right one for your " -"card\n" -"you can pick one in the above list.\n" -"\n" -"The current driver for your \"%s\" sound card is \"%s\" " +"These are the machines and networks on which the locally connected printer" +"(s) should be available:" msgstr "" -#: ../../harddrake/sound.pm:1 +#: ../../lang.pm:1 ../../network/tools.pm:1 #, c-format -msgid "Choosing an arbitratry driver" -msgstr "" +msgid "United Kingdom" +msgstr "Об'╓днане Корол╕вство" -#: ../../harddrake/sound.pm:1 +#: ../../services.pm:1 #, c-format -msgid "" -"The classic bug sound tester is to run the following commands:\n" -"\n" -"\n" -"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n" -"by default\n" -"\n" -"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n" -"currently uses\n" -"\n" -"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n" -"loaded or not\n" -"\n" -"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n" -"tell you if sound and alsa services're configured to be run on\n" -"initlevel 3\n" -"\n" -"- \"aumix -q\" will tell you if the sound volume is muted or not\n" -"\n" -"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n" -msgstr "" +msgid "running" +msgstr "працюю" -#: ../../harddrake/sound.pm:1 +#: ../../standalone/drakfloppy:1 #, c-format -msgid "Sound trouble shooting" -msgstr "" +msgid "default" +msgstr "стандартний" -#: ../../harddrake/sound.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Error: The \"%s\" driver for your sound card is unlisted" -msgstr "" +msgid "Indonesia" +msgstr "╤ндонез╕я" -#: ../../harddrake/sound.pm:1 +#: ../../standalone/drakxtv:1 #, fuzzy, c-format -msgid "Unkown driver" -msgstr "Нев╕дома модель" +msgid "France [SECAM]" +msgstr "Франц╕я" -#: ../../harddrake/sound.pm:1 +#: ../../any.pm:1 #, c-format -msgid "There's no known driver for your sound card (%s)" -msgstr "" +msgid "restrict" +msgstr "обмежити" -#: ../../harddrake/sound.pm:1 +#: ../../pkgs.pm:1 #, c-format -msgid "No known driver" -msgstr "" +msgid "must have" +msgstr "потр╕бний" -#: ../../harddrake/sound.pm:1 -#, c-format +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format msgid "" -"There's no free driver for your sound card (%s), but there's a proprietary " -"driver at \"%s\"." +"CUPS does not support printers on Novell servers or printers sending the " +"data into a free-formed command.\n" msgstr "" +"CUPS не п╕дтриму╓ друк на принтерах сервер╕в Novell чи принтер╕в, що\n" +"передають дан╕ на друк у вигляд╕ команд з дов╕льним синтаксисом.\n" -#: ../../harddrake/sound.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "No open source driver" -msgstr "" +msgid "Senegal" +msgstr "Сенегал" -#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Please Wait... Applying the configuration" -msgstr "Зачекайте, будь ласка. Тестування конф╕╜урац╕╖" +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Command line" +msgstr "Назва домену" -#: ../../harddrake/sound.pm:1 +#: ../../share/advertising/08-store.pl:1 #, c-format msgid "" -"The old \"%s\" driver is blacklisted.\n" -"\n" -"It has been reported to oops the kernel on unloading.\n" -"\n" -"The new \"%s\" driver'll only be used on next bootstrap." +"Our full range of Linux solutions, as well as special offers on products and " +"other \"goodies\", are available on our e-store:" msgstr "" -#: ../../harddrake/sound.pm:1 +#: ../../any.pm:1 #, c-format -msgid "Trouble shooting" +msgid "access to administrative files" msgstr "" -#: ../../harddrake/sound.pm:1 +#: ../../standalone/drakbackup:1 #, c-format msgid "" -"OSS (Open Sound System) was the first sound API. It's an OS independant " -"sound API (it's available on most unices systems) but it's a very basic and " -"limited API.\n" -"What's more, OSS drivers all reinvent the wheel.\n" -"\n" -"ALSA (Advanced Linux Sound Architecture) is a modularized architecture " -"which\n" -"supports quite a large range of ISA, USB and PCI cards.\n" -"\n" -"It also provides a much higher API than OSS.\n" -"\n" -"To use alsa, one can either use:\n" -"- the old compatibility OSS api\n" -"- the new ALSA api that provides many enhanced features but requires using " -"the ALSA library.\n" +"Error during sendmail.\n" +" Your report mail was not sent.\n" +" Please configure sendmail" msgstr "" -#: ../../harddrake/sound.pm:1 +#: ../../printer/main.pm:1 +#, c-format +msgid ", multi-function device on parallel port \\#%s" +msgstr "" + +#: ../../security/help.pm:1 #, c-format msgid "" +"Arguments: (val)\n" "\n" -"\n" -"Your card currently use the %s\"%s\" driver (default driver for your card is " -"\"%s\")" +"Set the shell timeout. A value of zero means no timeout." msgstr "" -#: ../../harddrake/sound.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "" -"Here you can select an alternative driver (either OSS or ALSA) for your " -"sound card (%s)." +msgid "Montserrat" +msgstr "Монсеррат" + +#: ../../help.pm:1 +#, c-format +msgid "Automatic dependencies" msgstr "" -#: ../../harddrake/sound.pm:1 +#: ../../diskdrake/hd_gtk.pm:1 +#, c-format +msgid "Swap" +msgstr "Swap" + +#: ../../standalone/net_monitor:1 #, fuzzy, c-format -msgid "Sound configuration" -msgstr "Конф╕╜урац╕я" +msgid "Connecting to the Internet " +msgstr "З'╓днатися з ╕нтернетом" -#: ../../harddrake/sound.pm:1 +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Restore Other" +msgstr "В╕дновити з файлу" + +#: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format -msgid "" -"There's no known OSS/ALSA alternative driver for your sound card (%s) which " -"currently uses \"%s\"" +msgid "TV card" +msgstr "Телев╕з╕йна плата" + +#: ../../printer/main.pm:1 +#, c-format +msgid "Printer on SMB/Windows 95/98/NT server" +msgstr "Принтер на сервер╕ SMB/Windows 95/98/NT " + +#: ../../standalone/scannerdrake:1 +#, c-format +msgid ", " msgstr "" -#: ../../harddrake/sound.pm:1 +#: ../../security/help.pm:1 #, c-format -msgid "No alternative driver" +msgid "" +"Arguments: (umask)\n" +"\n" +"Set the root umask." +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Remove selected host/network" +msgstr "Видалити принтер" + +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "" +"Postfix is a Mail Transport Agent, which is the program that moves mail from " +"one machine to another." msgstr "" +"Postfix - це програма для передач╕ електронно╖ пошти (Mail Transport\n" +"Agent), яка переда╓ поштов╕ пов╕домлення в╕д одного комп'ютера до\n" +"╕ншого." -#: ../../harddrake/v4l.pm:1 +#: ../../standalone/net_monitor:1 #, c-format -msgid "enable radio support" +msgid "Disconnection from the Internet failed." msgstr "" -#: ../../harddrake/v4l.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Radio support:" +msgid "" +"Here you can choose the key or key combination that will \n" +"allow switching between the different keyboard layouts\n" +"(eg: latin and non latin)" msgstr "" -#: ../../harddrake/v4l.pm:1 +#: ../../network/network.pm:1 #, fuzzy, c-format -msgid "PLL setting:" -msgstr "форматування" - -#: ../../harddrake/v4l.pm:1 -#, c-format -msgid "number of capture buffers for mmap'ed capture" -msgstr "" +msgid "Network Hotplugging" +msgstr "Конф╕гурац╕я мереж╕" -#: ../../harddrake/v4l.pm:1 +#: ../../security/help.pm:1 #, c-format -msgid "Number of capture buffers:" +msgid "if set to yes, reports check result to tty." msgstr "" -#: ../../harddrake/v4l.pm:1 +#: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "Tuner type:" -msgstr "Зм╕нити тип" +msgid "Restore From CD" +msgstr "В╕дновити з дискети" -#: ../../harddrake/v4l.pm:1 +#: ../../standalone/drakgw:1 #, fuzzy, c-format -msgid "Card model:" -msgstr "Пам'ять картки (DMA)" - -#: ../../harddrake/v4l.pm:1 -#, c-format msgid "" -"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" -"detect the rights parameters.\n" -"If your card is misdetected, you can force the right tuner and card types " -"here. Just select your tv card parameters if needed." +"You are about to configure your computer to share its Internet connection.\n" +"With that feature, other computers on your local network will be able to use " +"this computer's Internet connection.\n" +"\n" +"Make sure you have configured your Network/Internet access using drakconnect " +"before going any further.\n" +"\n" +"Note: you need a dedicated Network Adapter to set up a Local Area Network " +"(LAN)." msgstr "" +"Тепер п╕сля того, як параметри Вашого з'╓днання з ╤нтернетом\n" +"встановлен╕, Ви можете скоф╕╜урувати св╕й комп'ютер таким чином, щоб\n" +"в╕н дозволяв сп╕льне використання свого з'╓днання до\n" +"╤нтернету. \n" +"\n" +"Прим╕тка: Вам для цього потр╕бно мати плату мереж╕, щоб настро╖ти\n" +"локальну мережу (LAN)." -#: ../../harddrake/v4l.pm:1 -#, fuzzy, c-format -msgid "Unknown|Generic" -msgstr "Загальне" - -#: ../../harddrake/v4l.pm:1 +#: ../../network/ethernet.pm:1 #, c-format -msgid "Unknown|CPH06X (bt878) [many vendors]" +msgid "" +"Please choose which network adapter you want to use to connect to Internet." msgstr "" +"Вибер╕ть яку плату мереж╕ Ви хочете використати для з'╓днання з\n" +"╤нтернетом" -#: ../../harddrake/v4l.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Unknown|CPH05X (bt878) [many vendors]" +msgid "Photo memory card access on your HP multi-function device" msgstr "" -#: ../../harddrake/v4l.pm:1 -#, fuzzy, c-format -msgid "Auto-detect" -msgstr "Користуватися автовизначенням" - -#: ../../interactive/newt.pm:1 -#, fuzzy, c-format -msgid "Do" -msgstr "Зак╕нчено" - -#: ../../interactive/stdio.pm:1 +#: ../../share/advertising/09-mdksecure.pl:1 #, c-format -msgid "Your choice? (default %s) " -msgstr "Ваш виб╕р? (рекомендований %s) " +msgid "" +"Enhance your computer performance with the help of a selection of partners " +"offering professional solutions compatible with Mandrake Linux" +msgstr "" -#: ../../interactive/stdio.pm:1 +#: ../../standalone/drakgw:1 #, c-format -msgid "Bad choice, try again\n" -msgstr "Невдалий виб╕р, спробуйте ще раз\n" +msgid "Internet Connection Sharing is now disabled." +msgstr "Сп╕льне користування з'╓днанням з ╕нтернетом вимкнене" -#: ../../interactive/stdio.pm:1 +#: ../../security/help.pm:1 #, c-format -msgid "Re-submit" +msgid "if set to yes, verify checksum of the suid/sgid files." msgstr "" -#: ../../interactive/stdio.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "" -"=> Notice, a label changed:\n" -"%s" -msgstr "" +msgid "Latin American" +msgstr "Латино-американська" -#: ../../interactive/stdio.pm:1 -#, c-format -msgid "" -"Please choose the first number of the 10-range you wish to edit,\n" -"or just hit Enter to proceed.\n" -"Your choice? " -msgstr "" +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Japanese text printing mode" +msgstr "Настро╖ти мережу" -#: ../../interactive/stdio.pm:1 +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "Old device file" +msgstr "Вибер╕ть файл" + +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "=> There are many things to choose from (%s).\n" -msgstr "" +msgid "Info: " +msgstr "╤нформац╕я: " #: ../../interactive/stdio.pm:1 #, fuzzy, c-format -msgid "Your choice? (default `%s'%s) " -msgstr "Ваш виб╕р? (рекомендований %s) " +msgid "Button `%s': %s" +msgstr "Параметри: %s" -#: ../../interactive/stdio.pm:1 +#: ../../interactive.pm:1 ../../harddrake/sound.pm:1 +#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1 +#: ../../standalone/service_harddrake:1 #, c-format -msgid " enter `void' for void entry" -msgstr "" +msgid "Please wait" +msgstr "Зачекайте, будь-ласка" -#: ../../interactive/stdio.pm:1 -#, fuzzy, c-format -msgid "Do you want to click on this button?" -msgstr "Чи Ви хочете використовувати aboot?" +#: ../../mouse.pm:1 +#, c-format +msgid "Genius NetMouse" +msgstr "Genius NetMouse" -#: ../../interactive/stdio.pm:1 +#: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "Button `%s': %s" -msgstr "Параметри: %s" +msgid "None" +msgstr "Зак╕нчено" -#: ../../interactive/stdio.pm:1 +#: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "Your choice? (0/1, default `%s') " -msgstr "Ваш виб╕р? (рекомендований %s) " +msgid "The entered IP is not correct.\n" +msgstr "Все в╕рно?" -#: ../../interactive/stdio.pm:1 +#: ../../standalone/drakconnect:1 +#, c-format +msgid "Ethernet Card" +msgstr "Плата Ethernet" + +#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1 +#, c-format +msgid "Info" +msgstr "╤нформац╕я" + +#: ../../help.pm:1 ../../install_steps_gtk.pm:1 +#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1 #, c-format +msgid "Install" +msgstr "Установка" + +#: ../../help.pm:1 +#, fuzzy, c-format msgid "" -"Entries you'll have to fill:\n" -"%s" +"Click on \"%s\" if you want to delete all data and partitions present on\n" +"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n" +"to recover any data and partitions present on this hard drive, including\n" +"any Windows data.\n" +"\n" +"Click on \"%s\" to stop this operation without losing any data and\n" +"partitions present on this hard drive." msgstr "" +"Клацн╕ть на кнопц╕ \"Гаразд\", якщо ви хочете стерти вс╕ дан╕ та\n" +"п╕дрозд╕ли на цьому жорсткому диску. Будьте уважн╕: п╕сля того, як Ви\n" +"натиснете на \"Гаразд\" ви не зможете в╕дновити жодн╕ дан╕ чи\n" +"п╕дрозд╕ли, як╕ маються на цьому диску, включаючи також ╕ дан╕\n" +"В╕ндовс.\n" +"\n" +"Якщо Ви вир╕шили в╕дм╕нити цю операц╕ю, натисн╕ть клав╕шу\n" +"В╕дм╕нити. П╕дрозд╕ли ╕ дан╕ на диску залишаться без зм╕н." -#: ../../modules/interactive.pm:1 +#: ../../steps.pm:1 +#, c-format +msgid "Exit install" +msgstr "Вийти з установки" + +#: ../../standalone/drakgw:1 #, c-format msgid "" -"Loading module %s failed.\n" -"Do you want to try again with other parameters?" +"Everything has been configured.\n" +"You may now share Internet connection with other computers on your Local " +"Area Network, using automatic network configuration (DHCP)." msgstr "" -"Завантаження модуля %s неусп╕шне.\n" -"Хочете спробувати ╕нш╕ параметри?" +"Все сконф╕╜уровано. \n" +"\n" +"Ви можете сп╕льно користуватися з'╓днанням з ╕нтернетом разом з ╕ншими\n" +"комп'ютерами в ваш╕й локальн╕й мереж╕, з використанням автоматичного\n" +"конф╕╜урування мереж╕ (DHCP)." -#: ../../modules/interactive.pm:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "Specify options" -msgstr "Вкаж╕ть опц╕╖" +msgid "Remote CUPS server" +msgstr "В╕ддалений сервер CUPS" -#: ../../modules/interactive.pm:1 +#: ../../mouse.pm:1 #, c-format -msgid "Autoprobe" -msgstr "Автотест" +msgid "Sun - Mouse" +msgstr "Миша Sun" -#: ../../modules/interactive.pm:1 +#: ../../standalone/drakgw:1 #, c-format msgid "" -"In some cases, the %s driver needs to have extra information to work\n" -"properly, although it normally works fine without them. Would you like to " -"specify\n" -"extra options for it or allow the driver to probe your machine for the\n" -"information it needs? Occasionally, probing will hang a computer, but it " -"should\n" -"not cause any damage." +"There is only one configured network adapter on your system:\n" +"\n" +"%s\n" +"\n" +"I am about to setup your Local Area Network with that adapter." msgstr "" -"В деяких випадках драйвер %s вимага╓ додатково╖ ╕нформац╕╖ для того,\n" -"щоб в╕рно працювати, хоча звичайно працю╓ нормально без не╖. Чи не\n" -"хот╕ли б ви вказати додатков╕ опц╕╖ для нього чи дозволити драйверу\n" -"випробувати Вашу систему, щоб знайти потр╕бну ╕нформац╕ю? ╤нколи таке\n" -"випробовування може привести до зависання комп'ютера, але не повинно\n" -"н╕як зашкодити йому." +"У Ваш╕й систем╕ присутн╕й т╕льки один адаптер мереж╕:\n" +"\n" +"%s\n" +"\n" +"Зараз буде встановлена локальна мережа з цим адаптером." -#. -PO: the %s is the driver type (scsi, network, sound,...) -#: ../../modules/interactive.pm:1 +#: ../../install_steps_gtk.pm:1 #, c-format -msgid "Which %s driver should I try?" -msgstr "Який драйвер %s мен╕ спробувати?" +msgid "Minimal install" +msgstr "М╕н╕мальна установка" -#: ../../modules/interactive.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Module options:" -msgstr "Опц╕╖ модуля:" +msgid "Ethiopia" +msgstr "Еф╕оп╕я" -#: ../../modules/interactive.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "" -"You may now provide options to module %s.\n" -"Options are in format ``name=value name2=value2 ...''.\n" -"For instance, ``io=0x300 irq=7''" +msgid "Devanagari" msgstr "" -"ви можете тепер використовувати його опц╕╖ в модул╕ %s.\n" -"Опц╕╖ мають формат ``назва=величина назва2=величина2 ...''.\n" -"Наприклад, ``io=0x300 irq=7''" -#: ../../modules/interactive.pm:1 +#: ../../standalone/harddrake2:1 #, c-format msgid "" -"You may now provide options to module %s.\n" -"Note that any address should be entered with the prefix 0x like '0x123'" +"- pci devices: this gives the PCI slot, device and function of this card\n" +"- eide devices: the device is either a slave or a master device\n" +"- scsi devices: the scsi bus and the scsi device ids" msgstr "" -#: ../../modules/interactive.pm:1 +#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format -msgid "(module %s)" -msgstr "(модуль %s)" +msgid "Total size: %d / %d MB" +msgstr "Загальний розм╕р: %d / %d Мб " -#. -PO: the first %s is the card type (scsi, network, sound,...) -#. -PO: the second is the vendor+model name -#: ../../modules/interactive.pm:1 -#, c-format -msgid "Installing driver for %s card %s" -msgstr "Встановлюю драйвер для %s плати %s" +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "disabled" +msgstr "заборонити" -#: ../../modules/interactive.pm:1 -#, c-format -msgid "See hardware info" -msgstr "Перегляньте ╕нформац╕ю про апаратне забезпечення" +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "Search for new scanners" +msgstr "Локальний принтер" -#: ../../modules/interactive.pm:1 +#: ../../standalone/drakgw:1 #, c-format -msgid "Do you have any %s interfaces?" -msgstr "Чи ви ма╓те будь-як╕ %s ╕нтерфейси?" +msgid "Disabling servers..." +msgstr "Заборона сервер╕в..." -#: ../../modules/interactive.pm:1 -#, c-format -msgid "Do you have another one?" -msgstr "Чи ви ма╓те ╕нш╕?" +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "" +"Please choose the time \n" +"interval between each backup" +msgstr "Вибер╕ть пакети, як╕ Ви хочете встановити" -#: ../../modules/interactive.pm:1 +#: ../../standalone/drakboot:1 #, c-format -msgid "Found %s %s interfaces" -msgstr "Знайден╕ ╕нтерфейси %s %s" +msgid "Installation of %s failed. The following error occured:" +msgstr "Установка %s неусп╕шна. Сталася помилка:" -#: ../../modules/interactive.pm:1 +#: ../../standalone/drakboot:1 #, c-format -msgid "You can configure each parameter of the module here." +msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s." msgstr "" -#: ../../modules/parameters.pm:1 +#: ../../install_any.pm:1 #, fuzzy, c-format -msgid "comma separated strings" -msgstr "Форматувати п╕дрозд╕ли" +msgid "" +"You have selected the following server(s): %s\n" +"\n" +"\n" +"These servers are activated by default. They don't have any known security\n" +"issues, but some new ones could be found. In that case, you must make sure\n" +"to upgrade as soon as possible.\n" +"\n" +"\n" +"Do you really want to install these servers?\n" +msgstr "" +"Ви вибрали так╕(ий) сервер(и): %s\n" +"\n" +"Ц╕ сервери стандартно актив╕зован╕. Для них нев╕дом╕ н╕як╕ проблеми з\n" +"безпекою, але деяк╕ можуть бути виявлен╕. В такому випадку ви повинн╕\n" +"якомога швидше поновити верс╕╖ цих сервер╕в. \n" +"\n" +"Ви хочете дозволити установку цих сервер╕в?\n" -#: ../../modules/parameters.pm:1 +#: ../../printer/main.pm:1 +#, fuzzy, c-format +msgid "Network printer (TCP/Socket)" +msgstr "Принтер в мереж╕ (сокет)" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Backup User files..." +msgstr "Поганий резервний файл" + +#: ../../steps.pm:1 #, c-format -msgid "comma separated numbers" -msgstr "" +msgid "Install system" +msgstr "Встановити систему" -#: ../../modules/parameters.pm:1 +#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format -msgid "%d comma separated strings" -msgstr "" +msgid "First DNS Server (optional)" +msgstr "Перший сервер DNS (необов'язково)" -#: ../../modules/parameters.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "%d comma separated numbers" +msgid "" +"Alternatively, you can specify a device name/file name in the input line" msgstr "" -#: ../../modules/parameters.pm:1 +#: ../../standalone/drakTermServ:1 #, fuzzy, c-format -msgid "a number" -msgstr "Номер телефону" +msgid "dhcpd Config..." +msgstr "Конф╕гурац╕я..." -#: ../../network/adsl.pm:1 +#: ../../standalone/drakgw:1 #, c-format -msgid "" -"You need the alcatel microcode.\n" -"Download it at\n" -"http://www.speedtouchdsl.com/dvrreg_lx.htm\n" -"and copy the mgmt.o in /usr/share/speedtouch" +msgid "The setup has already been done, but it's currently disabled." msgstr "" +"Установка сп╕льного користування з'╓днанням з ╕нтернетом вже зроблена,\n" +"але на даний момент воно в╕дключено." -#: ../../network/adsl.pm:1 +#: ../../any.pm:1 #, c-format -msgid "" -"The most common way to connect with adsl is pppoe.\n" -"Some connections use pptp, a few use dhcp.\n" -"If you don't know, choose 'use pppoe'" -msgstr "" -"Найб╕льш поширений спос╕б з'╓днання через adsl - це за допомогою\n" -"pppoe. Однак, деяк╕ з'╓днання користуються т╕льки pptp, невелика\n" -"к╕льк╕сть користу╓ться dhcp. Якщо Ви не зна╓те напевне вибер╕ть\n" -"\"вживати pppoe\"." +msgid "LILO/grub Installation" +msgstr "Установка LILO/grub" -#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Connect to the Internet" -msgstr "З'╓днатися з ╕нтернетом" +msgid "Israeli" +msgstr "╤зра╖льська" -#: ../../network/adsl.pm:1 +#: ../../standalone/logdrake:1 +#, fuzzy, c-format +msgid "load setting" +msgstr "форматування" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Printer \"%s\" on server \"%s\"" +msgstr "Вимикаю мережу" + +#: ../../standalone/drakTermServ:1 #, c-format -msgid "Sagem (using pppoa) usb" +msgid "Floppy can be removed now" msgstr "" -#: ../../network/adsl.pm:1 +#: ../../help.pm:1 #, fuzzy, c-format -msgid "Alcatel speedtouch usb" -msgstr "speedtouch usb" +msgid "Truly minimal install" +msgstr "М╕н╕мальна установка" -#: ../../network/adsl.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "use dhcp" -msgstr "користуватися dhcp" +msgid "Denmark" +msgstr "Дан╕я" -#: ../../network/adsl.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "use pptp" -msgstr "вживати pptp" +msgid "Moving partition..." +msgstr "Перем╕щаю п╕дрозд╕л..." -#: ../../network/adsl.pm:1 +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "(This) DHCP Server IP" +msgstr "IP адреса CUPS сервера" + +#: ../../Xconfig/test.pm:1 #, c-format -msgid "use pppoe" -msgstr "вживати pppoe" +msgid "Test of the configuration" +msgstr "Тестування конф╕╜урац╕╖" -#: ../../network/drakfirewall.pm:1 +#: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "Other ports" -msgstr "Тестую порти" +msgid "Installing %s ..." +msgstr "Установка пакету %s" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"If you told the installer that you wanted to individually select packages,\n" +"it will present a tree containing all packages classified by groups and\n" +"subgroups. While browsing the tree, you can select entire groups,\n" +"subgroups, or individual packages.\n" +"\n" +"Whenever you select a package on the tree, a description appears on the\n" +"right to let you know the purpose of the package.\n" +"\n" +"!! If a server package has been selected, either because you specifically\n" +"chose the individual package or because it was part of a group of packages,\n" +"you will be asked to confirm that you really want those servers to be\n" +"installed. By default Mandrake Linux will automatically start any installed\n" +"services at boot time. Even if they are safe and have no known issues at\n" +"the time the distribution was shipped, it is entirely possible that that\n" +"security holes were discovered after this version of Mandrake Linux was\n" +"finalized. If you do not know what a particular service is supposed to do\n" +"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n" +"install the listed services and they will be started automatically by\n" +"default during boot. !!\n" +"\n" +"The \"%s\" option is used to disable the warning dialog which appears\n" +"whenever the installer automatically selects a package to resolve a\n" +"dependency issue. Some packages have relationships between each other such\n" +"that installation of a package requires that some other program is also\n" +"rerquired to be installed. The installer can determine which packages are\n" +"required to satisfy a dependency to successfully complete the installation.\n" +"\n" +"The tiny floppy disk icon at the bottom of the list allows you to load a\n" +"package list created during a previous installation. This is useful if you\n" +"have a number of machines that you wish to configure identically. Clicking\n" +"on this icon will ask you to insert a floppy disk previously created at the\n" +"end of another installation. See the second tip of last step on how to\n" +"create such a floppy." +msgstr "" +"╤ нарешт╕, в залежност╕ в╕д того, чи Ви вибрали ╕ндив╕дуальний виб╕р\n" +"пакет╕в чи н╕, Вам буде показано повне дерево пакет╕в з╕браних по\n" +"групах ╕ п╕дгрупах. Переглядаючи пакети Ви зможете вибрати повн╕\n" +"групи, п╕дгрупи та ╕ндив╕дуальн╕ пакети.\n" +"\n" +"Кожного разу, коли Ви вибира╓те пакет в дерев╕, з'явла╓ться п╕дказка,\n" +"праворуч в╕д назви. \n" +" \n" +"П╕сля того, як Ви зак╕нчили виб╕р пакет╕в, натисн╕ть кнопку\n" +"Встановити. Почнеться власне установка системи. Якщо к╕льк╕сть\n" +"вибраних пакет╕в велика, можете п╕ти попити кави.\n" +"\n" +"!! Якщо або навмисне, або як складова частина яко╖сь групи, було\n" +"вибрано для установки певн╕ сервери, Вам буде задане запитання, чи Ви\n" +"справд╕ бажа╓те бачити ц╕ сервери встановленими. В Мандрейку вс╕\n" +"встановлен╕ сервери автоматично запускаються при завантаженн╕\n" +"системи. Нав╕ть, якщо на час куп╕вл╕ системи не було в╕домо проблем з\n" +"безпекою даних сервер╕в, можливо, що в п╕зн╕ший час так╕ проблеми\n" +"будуть виявлен╕. Особливо, якщо Ви не зна╓те про що йде мова,\n" +"натисн╕ть тут на Н╕. Якщо Ви натиснете Так, сервери будуть встановлен╕\n" +"╕ вмикнен╕ неявно!!\n" +"\n" +"Опц╕я Автоматичн╕ залежност╕ забороня╓ попередження коли програма\n" +"установки знаходить, що т╕льки що вибраний (чи в╕дм╕нений виб╕р) пакет\n" +"залежить в╕д ╕ншого пакету.\n" +"\n" +"Маленька п╕ктограма гнучкого диска в самому низу списку дозволя╓\n" +"завантажити список пакет╕в з дискети, якщо при попередн╕й установц╕ Ви\n" +"зберегли його на дискету. П╕сля натискання ц╕╓╖ кнопки, система\n" +"попросить вставити дискету ╕з списком пакет╕в у прив╕д. Додатково Ви\n" +"можете отримати ╕нформац╕ю про те, як створити таку дискету в друг╕й\n" +"порад╕ останнього пункту." -#: ../../network/drakfirewall.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Everything (no firewall)" +msgid "Choose your filesystem encryption key" msgstr "" -#: ../../network/drakfirewall.pm:1 +#: ../../standalone/drakbackup:1 #, c-format msgid "" -"Invalid port given: %s.\n" -"The proper format is \"port/tcp\" or \"port/udp\", \n" -"where port is between 1 and 65535." +"Please choose your CD/DVD device\n" +"(Press Enter to propogate settings to other fields.\n" +"This field isn't necessary, only a tool to fill in the form.)" msgstr "" -#: ../../network/drakfirewall.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "" -"You can enter miscellaneous ports. \n" -"Valid examples are: 139/tcp 139/udp.\n" -"Have a look at /etc/services for information." -msgstr "" +msgid "Andorra" +msgstr "Андора" -#: ../../network/drakfirewall.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Which services would you like to allow the Internet to connect to?" -msgstr "" +msgid "Sierra Leone" +msgstr "Сь╓рра-Леоне" -#: ../../network/drakfirewall.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "" -"drakfirewall configurator\n" -"\n" -"Make sure you have configured your Network/Internet access with\n" -"drakconnect before going any further." -msgstr "" +msgid "Botswana" +msgstr "Ботсвана" -#: ../../network/drakfirewall.pm:1 +#: ../../standalone/draksec:1 #, fuzzy, c-format +msgid "(default value: %s)" +msgstr " (Основна)" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Alternative test page (Letter)" +msgstr "Додаткова тестова стор╕нка (Letter)" + +#: ../../standalone/drakgw:1 +#, c-format msgid "" -"drakfirewall configurator\n" +"DHCP Server Configuration.\n" "\n" -"This configures a personal firewall for this Mandrake Linux machine.\n" -"For a powerful and dedicated firewall solution, please look to the\n" -"specialized MandrakeSecurity Firewall distribution." -msgstr "" -"Манюс╕нький брандмауер\n" +"Here you can select different options for the DHCP server configuration.\n" +"If you don't know the meaning of an option, simply leave it as it is.\n" "\n" -"Ц╕ установки конф╕╜урують персональний брандмауер (a.k.a. firewall) на\n" -"дан╕й машин╕ з Л╕накс Мандрейк. Для того, щоб встановити серйозний\n" -"потужний брандмауер, зверн╕ться, будь ласка, до спец╕ал╕зованого\n" -"дистрибутива MandrakeSecurity Firewall." - -#: ../../network/drakfirewall.pm:1 -#, fuzzy, c-format -msgid "No network card" -msgstr "не знайдена плата мереж╕" +msgstr "" -#: ../../network/drakfirewall.pm:1 +#: ../../Xconfig/card.pm:1 #, fuzzy, c-format -msgid "POP and IMAP Server" -msgstr "Сервер LDAP" +msgid "Choose an X server" +msgstr "Вибер╕ть X сервер" -#: ../../network/drakfirewall.pm:1 -#, fuzzy, c-format -msgid "Mail Server" -msgstr "База даних" +#: ../../install_interactive.pm:1 +#, c-format +msgid "Swap partition size in MB: " +msgstr "Розм╕р п╕дрозд╕лу для своп╕нгу в Мб: " -#: ../../network/drakfirewall.pm:1 -#, fuzzy, c-format -msgid "Domain Name Server" -msgstr "Назва домену" +#: ../../standalone/drakbackup:1 +#, c-format +msgid "" +"Other (not drakbackup)\n" +"keys in place already" +msgstr "" -#: ../../network/drakfirewall.pm:1 +#: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "Web Server" -msgstr "Сервер" +msgid "No changes to backup!" +msgstr "Поганий резервний файл" -#: ../../network/ethernet.pm:1 ../../network/network.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Zeroconf host name must not contain a ." -msgstr "" +msgid "Formatted\n" +msgstr "Форматований\n" -#: ../../network/ethernet.pm:1 ../../network/network.pm:1 -#, c-format -msgid "Host name" -msgstr "Назва хоста" +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Type of install" +msgstr "Вибер╕ть пакет для установки" -#: ../../network/ethernet.pm:1 ../../network/network.pm:1 +#: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "Zeroconf Host name" -msgstr "Назва хоста" +msgid "Printer \"%s\" on SMB/Windows server \"%s\"" +msgstr "Принтер на сервер╕ SMB/Windows 95/98/NT " -#: ../../network/ethernet.pm:1 ../../network/network.pm:1 +#: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" -"\n" -"Enter a Zeroconf host name without any dot if you don't\n" -"want to use the default host name." +"- Daemon (%s) include:\n" msgstr "" -#: ../../network/ethernet.pm:1 ../../network/network.pm:1 +#: ../../modules/parameters.pm:1 #, c-format -msgid "Configuring network" -msgstr "Конф╕гурую мережу" +msgid "%d comma separated numbers" +msgstr "" -#: ../../network/ethernet.pm:1 +#: ../../services.pm:1 #, c-format msgid "" -"Please choose which network adapter you want to use to connect to Internet." +"The rusers protocol allows users on a network to identify who is\n" +"logged in on other responding machines." msgstr "" -"Вибер╕ть яку плату мереж╕ Ви хочете використати для з'╓днання з\n" -"╤нтернетом" +"Протокол rusers да╓ можлив╕сть користувачам в мереж╕ отримувати\n" +"╕нформац╕ю про те, хто з користувач╕в заре╓стрований на системах, що\n" +"в╕дпов╕дають на запити." -#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1 -#: ../../standalone/drakpxe:1 +#: ../../standalone/drakautoinst:1 #, c-format -msgid "Choose the network interface" -msgstr "Вибер╕ть ╕нтерфейс мереж╕" +msgid "Automatic Steps Configuration" +msgstr "Конф╕╜урац╕я крок╕в установки" -#: ../../network/ethernet.pm:1 +#: ../../share/advertising/02-community.pl:1 #, c-format msgid "" -"No ethernet network adapter has been detected on your system.\n" -"I cannot set up this connection type." +"Want to know more and to contribute to the Open Source community? Get " +"involved in the Free Software world!" msgstr "" -"У Ваш╕й систем╕ нема╓ сконф╕╜урованого адаптера мереж╕ ethernet. Не\n" -"можна встановити з'╓днання цього типу." -#: ../../network/ethernet.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "" -"Which dhcp client do you want to use?\n" -"Default is dhcp-client." -msgstr "" -"Який dhcp кл╕╓нт Ви хочете використовувати?\n" -"Стандартний кл╕╓нт - dhcp-client" +msgid "Barbados" +msgstr "Барбадос" -#: ../../network/isdn.pm:1 -#, c-format -msgid "No ISDN PCI card found. Please select one on the next screen." -msgstr "Не знайдено плати ISDN PCI. Вибер╕ть одну ╕з плат у наступному в╕кн╕." +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Please select data to backup..." +msgstr "Вибер╕ть, будь-ласка, мову." -#: ../../network/isdn.pm:1 +#: ../../standalone/net_monitor:1 #, c-format msgid "" -"I have detected an ISDN PCI card, but I don't know its type. Please select a " -"PCI card on the next screen." +"Connection failed.\n" +"Verify your configuration in the Mandrake Control Center." msgstr "" -"Знайдена ISDN PCI плата, але нев╕домого типу. Вибер╕ть, будь-ласка, одну з " -"плат PCI на наступному екран╕." - -#: ../../network/isdn.pm:1 -#, fuzzy, c-format -msgid "Which of the following is your ISDN card?" -msgstr "Яка Ваша ISDN плата?" -#: ../../network/isdn.pm:1 +#: ../../standalone/net_monitor:1 #, c-format -msgid "ISDN Configuration" -msgstr "Конф╕╜урац╕я ISDN" +msgid "received" +msgstr "" -#: ../../network/isdn.pm:1 +#: ../../standalone/logdrake:1 #, c-format -msgid "Abort" -msgstr "В╕дм╕нити" +msgid "/File/_New" +msgstr "/Файл/Новий" -#: ../../network/isdn.pm:1 -#, c-format -msgid "Continue" -msgstr "Продовжувати" +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "The DNS Server IP" +msgstr "IP адреса CUPS сервера" -#: ../../network/isdn.pm:1 +#: ../../standalone/drakTermServ:1 #, c-format -msgid "" -"\n" -"If you have an ISA card, the values on the next screen should be right.\n" -"\n" -"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your " -"card.\n" +msgid "IP Range End:" msgstr "" -"\n" -"Якщо Ви ма╓те плату ISA, значення на наступному екран╕ мають бути\n" -"коректними.\n" -"\n" -"Якщо Ви ма╓те плату PCMCIA, Ви повинн╕ знати IRQ та IO Вашо╖ плати.\n" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "I don't know" -msgstr "Не знаю" - -#: ../../network/isdn.pm:1 -#, c-format -msgid "PCI" -msgstr "PCI" -#: ../../network/isdn.pm:1 +#: ../../security/level.pm:1 #, c-format -msgid "ISA / PCMCIA" -msgstr "ISA / PCMCIA" +msgid "High" +msgstr "Високий" -#: ../../network/isdn.pm:1 +#: ../../any.pm:1 #, c-format -msgid "What kind of card do you have?" -msgstr "Який тип картки Ви ма╓те" +msgid "NoVideo" +msgstr "БезВ╕део" -#: ../../network/isdn.pm:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "Found \"%s\" interface do you want to use it ?" +msgid "this field describes the device" msgstr "" -#: ../../network/isdn.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Which protocol do you want to use?" -msgstr "Який протокол Ви хочете використовувати?" +msgid "Adding printer to Star Office/OpenOffice.org/GIMP" +msgstr "" -#: ../../network/isdn.pm:1 -#, c-format -msgid "Protocol for the rest of the world" -msgstr "Протокол для всього ╕ншого св╕ту" +#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Local Printers" +msgstr "Локальний принтер" -#: ../../network/isdn.pm:1 +#: ../../standalone/drakpxe:1 +#, fuzzy, c-format +msgid "Installation image directory" +msgstr "Xpmac (драйвер дисплея для установки)" + +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "" -"Protocol for the rest of the world\n" -"No D-Channel (leased lines)" -msgstr "" -"Протокол для всього ╕ншого св╕ту \n" -" без D-каналу (вид╕лених л╕н╕й)" +msgid "NIS Server" +msgstr "Сервер NIS" -#: ../../network/isdn.pm:1 +#: ../../standalone/scannerdrake:1 #, fuzzy, c-format -msgid "European protocol" -msgstr "╢вропейський протокол" +msgid "Port: %s" +msgstr "Порт" -#: ../../network/isdn.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "European protocol (EDSS1)" -msgstr "╢вропейський протоколь (EDSS1)" +msgid "Spain" +msgstr "╤спан╕я" -#: ../../network/isdn.pm:1 +#: ../../any.pm:1 #, c-format -msgid "" -"Select your provider.\n" -"If it isn't listed, choose Unlisted." -msgstr "" -"Вибер╕ть свого провайдера.\n" -"Якщо його нема╓ в списку, вибер╕ть ╤нший" +msgid "This user name has already been added" +msgstr "Це ╕м'я вже зайняте" -#: ../../network/isdn.pm:1 +#: ../../interactive.pm:1 #, c-format -msgid "External ISDN modem" -msgstr "Зовн╕шн╕й модем ISDN" +msgid "Choose a file" +msgstr "Вибер╕ть файл" -#: ../../network/isdn.pm:1 +#: ../../standalone/drakconnect:1 #, c-format -msgid "Internal ISDN card" -msgstr "Внутр╕шня плата ISDN" +msgid "Apply" +msgstr "Застосувати" -#: ../../network/isdn.pm:1 +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "Auto-detect available ports" +msgstr "Користуватися автовизначенням" + +#: ../../standalone/drakgw:1 #, c-format -msgid "What kind is your ISDN connection?" -msgstr "Який тип з'╓днання ISDN Ви ма╓те?" +msgid "Internet Connection Sharing currently disabled" +msgstr "Сп╕льне користування з'╓днанням з ╕нтернетом вимкнене" -#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Network Configuration Wizard" -msgstr "Пом╕чник конф╕гурац╕╖ мереж╕" +msgid "San Marino" +msgstr "Сан Мар╕но" -#: ../../network/isdn.pm:1 +#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 +#, fuzzy, c-format +msgid "Belgium" +msgstr "Бельг╕йська" + +#: ../../lang.pm:1 #, c-format -msgid "Old configuration (isdn4net)" -msgstr "Стара конф╕╜урац╕я (isdn4net)" +msgid "Kuwait" +msgstr "Кувейт" -#: ../../network/isdn.pm:1 +#: ../../any.pm:1 #, c-format -msgid "New configuration (isdn-light)" -msgstr "Нова конф╕╜урац╕я (isdn-light)" +msgid "Choose the window manager to run:" +msgstr "Вибер╕ть менеджер в╕кон, яким ви хочете користуватися" -#: ../../network/isdn.pm:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "" -"Which ISDN configuration do you prefer?\n" -"\n" -"* The Old configuration uses isdn4net. It contains powerful\n" -" tools, but is tricky to configure, and not standard.\n" -"\n" -"* The New configuration is easier to understand, more\n" -" standard, but with less tools.\n" -"\n" -"We recommand the light configuration.\n" +msgid "sub generation of the cpu" msgstr "" -"Яку конф╕╜урац╕ю ISDN Ви бажа╓те встановити?\n" -"\n" -"* Стара конф╕╜урац╕я використуву╓ isdn4net. Досить потужн╕ засоби\n" -"входять до складу пакету, але його досить складно налагодити, ╕ в╕н не\n" -"╓ стандартним.\n" -"\n" -"* Нова конф╕╜урац╕я прост╕ша для розум╕ння, б╕льш стандартизована, але\n" -"ма╓ менше ╕нструментар╕ю.\n" -"\n" -"Ми рекоменду╓мо просту конф╕╜урац╕ю.\n" - -#: ../../network/modem.pm:1 -#, fuzzy, c-format -msgid "Do nothing" -msgstr "але не в╕дпов╕да╓" -#: ../../network/modem.pm:1 +#: ../../standalone/drakbug:1 #, fuzzy, c-format -msgid "Install rpm" -msgstr "Установка" +msgid "First Time Wizard" +msgstr "Ласкаво просимо до першого запуску Пом╕чника" -#: ../../network/modem.pm:1 +#: ../../install_steps.pm:1 #, c-format msgid "" -"\"%s\" based winmodem detected, do you want to install needed software ?" +"An error occurred, but I don't know how to handle it nicely.\n" +"Continue at your own risk." msgstr "" +"Сталася помилка, але я не знаю, як з нею поводитися.\n" +"Продовжуйте на св╕й власний ризик." -#: ../../network/modem.pm:1 +#: ../../standalone/logdrake:1 +#, c-format +msgid "please wait, parsing file: %s" +msgstr "будь ласка зажд╕ть, проходження файлу: %s" + +#: ../../lang.pm:1 #, fuzzy, c-format -msgid "Title" -msgstr "Таблиця" +msgid "Taiwan" +msgstr "Тайланд" -#: ../../network/modem.pm:1 +#: ../../lang.pm:1 +#, c-format +msgid "Pakistan" +msgstr "Пак╕стан" + +#: ../../printer/printerdrake.pm:1 #, c-format msgid "" -"Your modem isn't supported by the system.\n" -"Take a look at http://www.linmodems.org" +"To be able to print with your Lexmark inkjet and this configuration, you " +"need the inkjet printer drivers provided by Lexmark (http://www.lexmark." +"com/). Click on the \"Drivers\" link. Then choose your model and afterwards " +"\"Linux\" as operating system. The drivers come as RPM packages or shell " +"scripts with interactive graphical installation. You do not need to do this " +"configuration by the graphical frontends. Cancel directly after the license " +"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and " +"adjust the head alignment settings with this program." msgstr "" -#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 +#: ../../standalone/drakperm:1 +#, fuzzy, c-format +msgid "Permissions" +msgstr "Верс╕я: %s\n" + +#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format -msgid "Second DNS Server (optional)" -msgstr "Другий сервер DNS(необов'язково)" +msgid "Provider name (ex provider.net)" +msgstr "Назва провайдера (тобто provider.net)" -#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 +#: ../../install_steps_gtk.pm:1 #, c-format -msgid "First DNS Server (optional)" -msgstr "Перший сервер DNS (необов'язково)" +msgid "Version: %s\n" +msgstr "Верс╕я: %s\n" -#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 +#: ../../install_steps_gtk.pm:1 #, c-format -msgid "Domain name" -msgstr "Назва домену" +msgid "" +"Your system is low on resources. You may have some problem installing\n" +"Mandrake Linux. If that occurs, you can try a text install instead. For " +"this,\n" +"press `F1' when booting on CDROM, then enter `text'." +msgstr "" +"Ваша система ма╓ замало ресурс╕в. Ви можете мати проблеми з установкою\n" +"Mandrake Л╕накса. Якщо це станеться, ви можете спробувати установку в\n" +"текстовому режим╕. Для цього п╕д час завантаження компакт-диску\n" +"натисн╕ть F1 ╕ пот╕м введ╕ть \"text\"." -#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 +#: ../../install_interactive.pm:1 #, c-format -msgid "CHAP" -msgstr "CHAP" +msgid "Use the Windows partition for loopback" +msgstr "Використовувати п╕дрозд╕л Windows для зворотнього монтування" -#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Script-based" -msgstr "За допомогою скрипта" +msgid "Armenian (typewriter)" +msgstr "В╕рменська (друкарська машинка)" -#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 +#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format -msgid "Terminal-based" -msgstr "Через терм╕нал" +msgid "Connection type: " +msgstr "Тип зв'язку:" -#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Graphical interface" +msgstr "Стартувати X автоматично" + +#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1 #, c-format -msgid "PAP" -msgstr "PAP" +msgid "XFree %s with 3D hardware acceleration" +msgstr "XFree %s з апаратним прискоренням трьохвим╕рно╖ граф╕ки" -#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 +#: ../../lang.pm:1 #, c-format -msgid "Login ID" -msgstr "ID користувача" +msgid "India" +msgstr "╤нд╕я" -#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 +#: ../../lang.pm:1 #, c-format -msgid "Phone number" -msgstr "Номер телефону" +msgid "Chad" +msgstr "Чад" -#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 +#: ../../lang.pm:1 #, c-format -msgid "Connection name" -msgstr "Назва зв'язку" +msgid "Slovakia" +msgstr "Словак╕я" -#: ../../network/modem.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Dialup options" -msgstr "Параметри зв'язку по модему" +msgid "Singapore" +msgstr "С╕нгапур" -#: ../../network/modem.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Please choose which serial port your modem is connected to." -msgstr "Вибер╕ть до якого посл╕довного порта п╕дключений Ваш модем?" +msgid "Cambodia" +msgstr "Камбоджа" -#: ../../network/netconnect.pm:1 ../../network/tools.pm:1 +#: ../../Xconfig/various.pm:1 #, c-format -msgid "Network Configuration" -msgstr "Конф╕гурац╕я мереж╕" +msgid "Monitor HorizSync: %s\n" +msgstr "Горизонтальна синхрон╕зац╕я мон╕тора: %s\n" -#: ../../network/netconnect.pm:1 +#: ../../standalone/drakperm:1 #, c-format -msgid "" -"Problems occured during configuration.\n" -"Test your connection via net_monitor or mcc. If your connection doesn't " -"work, you might want to relaunch the configuration." +msgid "Path" msgstr "" -#: ../../network/netconnect.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format msgid "" -"After this is done, we recommend that you restart your X environment to " -"avoid any hostname-related problems." +"Here you can specify any arbitrary command line into which the job should be " +"piped instead of being sent directly to a printer." msgstr "" -"П╕сля того, як це зак╕нчено, бажано перевантажити X сервер для того,\n" -"щоб позбутися проблеми ╕з зм╕ною назви хоста." -#: ../../network/netconnect.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format msgid "" -"Congratulations, the network and Internet configuration is finished.\n" -"The configuration will now be applied to your system.\n" +"The printing system (%s) will not be started automatically when the machine " +"is booted.\n" "\n" -msgstr "" -"В╕та╓мо, конф╕╜урац╕я мереж╕ зак╕нчена.\n" +"It is possible that the automatic starting was turned off by changing to a " +"higher security level, because the printing system is a potential point for " +"attacks.\n" "\n" -"Тепер ця конф╕╜урац╕я буде застосована до вашо╖ системи.\n" +"Do you want to have the automatic starting of the printing system turned on " +"again?" +msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format msgid "" -"A problem occured while restarting the network: \n" -"\n" -"%s" +"Printer %s\n" +"What do you want to modify on this printer?" msgstr "" -"Проблема при перезапуску мереж╕:\n" -"\n" -"%s" +"Принтер %s: %s %s\n" +"Що потр╕бно зм╕нити для цього принтера?" -#: ../../network/netconnect.pm:1 +#: ../../standalone/scannerdrake:1 #, fuzzy, c-format -msgid "The network needs to be restarted. Do you want to restart it ?" -msgstr "Як╕ пакети Ви хочете встановити?" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Network configuration" -msgstr "Конф╕гурац╕я мереж╕" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Do you want to start the connection at boot?" -msgstr "Чи Ви хочете в╕дкривати з'╓днання при завантаженн╕ системи?" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Internet connection" -msgstr "З'╓днання з тенетами" +msgid "Add host" +msgstr "Додати користувача" -#: ../../network/netconnect.pm:1 +#: ../../harddrake/sound.pm:1 #, c-format msgid "" -"You have configured multiple ways to connect to the Internet.\n" -"Choose the one you want to use.\n" +"If you really think that you know which driver is the right one for your " +"card\n" +"you can pick one in the above list.\n" "\n" +"The current driver for your \"%s\" sound card is \"%s\" " msgstr "" -"Ви настро╖ли к╕лька способ╕в з'╓днання з ╕нформац╕йними тенетами.\n" -"Вибер╕ть один ╕з них, яким Ви будете користуватись.\n" -"\n" - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Choose the connection you want to configure" -msgstr "Вибер╕ть з'╓днання, яке Ви хочете настро╖ти" -#: ../../network/netconnect.pm:1 +#: ../../any.pm:1 #, c-format -msgid "ethernet card(s) detected" -msgstr "знайдено плата (и) Ethernet " +msgid "" +"Would you like to allow users to share some of their directories?\n" +"Allowing this will permit users to simply click on \"Share\" in konqueror " +"and nautilus.\n" +"\n" +"\"Custom\" permit a per-user granularity.\n" +msgstr "" -#: ../../network/netconnect.pm:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "LAN connection" -msgstr "З'╓днання через локальну мережу" +msgid "" +"Please choose load or save package selection on floppy.\n" +"The format is the same as auto_install generated floppies." +msgstr "" +"Будь ласка, вибер╕ть запис/завантаження вибору пакет╕в на дискету.\n" +"Формат дистети такий-же, як ╕ дискети auto_install." -#: ../../network/netconnect.pm:1 +#: ../../standalone/drakxtv:1 #, c-format -msgid "cable connection detected" -msgstr "Знайдено кабельне з'╓днання" +msgid "China (broadcast)" +msgstr "" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Cable connection" -msgstr "Кабельне з'╓днання" +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Use quota for backup files." +msgstr "Поганий резервний файл" -#: ../../network/netconnect.pm:1 +#: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "detected" -msgstr "знайдено %s" +msgid "Configuring printer \"%s\"..." +msgstr "Настроюю принтер \"%s\"..." #: ../../network/netconnect.pm:1 #, c-format -msgid "ADSL connection" -msgstr "З'╓днання ADSL" +msgid "Internet connection" +msgstr "З'╓днання з тенетами" -#: ../../network/netconnect.pm:1 +#: ../../modules/interactive.pm:1 #, c-format -msgid "detected %s" -msgstr "знайдено %s" +msgid "" +"Loading module %s failed.\n" +"Do you want to try again with other parameters?" +msgstr "" +"Завантаження модуля %s неусп╕шне.\n" +"Хочете спробувати ╕нш╕ параметри?" -#: ../../network/netconnect.pm:1 +#: ../../share/advertising/01-thanks.pl:1 #, c-format -msgid "ISDN connection" -msgstr "З'╓днання ISDN" - -#: ../../network/netconnect.pm:1 -#, fuzzy, c-format -msgid "Winmodem connection" -msgstr "Звичайне з'╓днання по модему" +msgid "Welcome to the Open Source world." +msgstr "" -#: ../../network/netconnect.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "detected on port %s" -msgstr "знайдено на порту %s" +msgid "Bosnia and Herzegovina" +msgstr "Босн╕я та Герцеговина" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Normal modem connection" -msgstr "Звичайне з'╓днання по модему" +#: ../../fsedit.pm:1 +#, fuzzy, c-format +msgid "" +"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " +"point\n" +msgstr "" +"Для ц╕╓╖ точки монтування Вам потр╕бна справжня файлова система (ext2,\n" +"reiserfs)\n" -#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Detecting devices..." -msgstr "Визначаю пристро╖..." +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "You must enter a host name or an IP address.\n" +msgstr "Випробуйте мишку, будь-ласка" -#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 -#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1 +#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format -msgid "Expert Mode" -msgstr "Експертний режим" +msgid "Netherlands" +msgstr "Голанд╕я" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "Use auto detection" -msgstr "Користуватися автовизначенням" +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Sending files by FTP" +msgstr "Записати в файл" -#: ../../network/netconnect.pm:1 +#: ../../network/isdn.pm:1 #, c-format -msgid "Choose the profile to configure" -msgstr "Вибер╕ть проф╕ль для конф╕гурац╕╖:" +msgid "Internal ISDN card" +msgstr "Внутр╕шня плата ISDN" -#: ../../network/netconnect.pm:1 +#: ../../harddrake/sound.pm:1 #, c-format msgid "" -"Welcome to The Network Configuration Wizard.\n" -"\n" -"We are about to configure your internet/network connection.\n" -"If you don't want to use the auto detection, deselect the checkbox.\n" +"There's no known OSS/ALSA alternative driver for your sound card (%s) which " +"currently uses \"%s\"" msgstr "" -"Ласкаво просимо до пом╕чника установки мереж╕.\n" -"\n" -"Зараз ваша мережа та ╕нтернет з'╓днання будуть настро╓н╕. Якщо ви не\n" -"хочете користуватись автоматичним визначенням, в╕дм╕н╕ть виб╕р опц╕╖.\n" -#: ../../network/netconnect.pm:1 -#, c-format -msgid "" -"Because you are doing a network installation, your network is already " -"configured.\n" -"Click on Ok to keep your configuration, or cancel to reconfigure your " -"Internet & Network connection.\n" -msgstr "" -"Через те, що ви робите установку по мереж╕, ваша мережа вже\n" -"сконф╕╜урована. \n" -"\n" -"Натисн╕ть на Гаразд щоб зберегти установки мереж╕, або на В╕дм╕нити\n" -"для того, щоб зм╕нити установки з'╓днання ╕нтернета ╕ мереж╕.\n" +#: ../../network/modem.pm:1 +#, fuzzy, c-format +msgid "Title" +msgstr "Таблиця" -#: ../../network/netconnect.pm:1 +#: ../../standalone/drakfont:1 #, c-format -msgid "" -"\n" -"\n" -"\n" -"We are now going to configure the %s connection.\n" -"\n" -"\n" -"Press OK to continue." +msgid "Install & convert Fonts" msgstr "" -"\n" -"\n" -"\n" -"Зараз буде сконф╕╜уровано з'╓днання %s.\n" -"\n" -"\n" -"Натисн╕ть \"Гаразд\" для продовдження" -#: ../../network/netconnect.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "We are now going to configure the %s connection." -msgstr "Зараз буде сконф╕╜уровано з'╓днання %s." +msgid "WARNING" +msgstr "" -#: ../../network/netconnect.pm:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "Internet connection & configuration" -msgstr "З'╓днання з ╕нтернетом ╕ конф╕гурац╕я" +msgid "Installing bootloader" +msgstr "Встановлюю блок завантаження" -#: ../../network/netconnect.pm:1 +#: ../../standalone/drakautoinst:1 #, fuzzy, c-format -msgid "Configure the connection" -msgstr "Настро╖ти мережу" +msgid "replay" +msgstr "Повторити" #: ../../network/netconnect.pm:1 #, c-format -msgid "Disconnect" -msgstr "В╕д'╓днатись" +msgid "detected %s" +msgstr "знайдено %s" -#: ../../network/netconnect.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Connect" -msgstr "З'╓днатись" +msgid "Virgin Islands (U.S.)" +msgstr "В╕рг╕нськ╕ острови (США)" -#: ../../network/netconnect.pm:1 +#: ../../partition_table.pm:1 #, c-format +msgid "Bad backup file" +msgstr "Поганий резервний файл" + +#: ../../standalone/drakgw:1 +#, fuzzy, c-format msgid "" +"The setup of Internet connection sharing has already been done.\n" +"It's currently disabled.\n" "\n" -"You can reconfigure your connection." +"What would you like to do?" msgstr "" +"Установка сп╕льного користування з'╓днанням з ╕нтернетом вже\n" +"зроблена. Сп╕льне користування в даний момент вимкнене.\n" "\n" -"Ви можете зм╕нити настройки з'╓днання з ╕нтернетом" +"Що Ви бажа╓те зробити?" -#: ../../network/netconnect.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "" -"\n" -"You can connect to the Internet or reconfigure your connection." +msgid "Enter IP address and port of the host whose printers you want to use." msgstr "" -"\n" -"Ви зараз з'╓днан╕ з ╕нтернетом." -#: ../../network/netconnect.pm:1 -#, c-format -msgid "You are not currently connected to the Internet." -msgstr "Ви зараз не з'╓днан╕ з ╕нтернетом." +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Pipe into command" +msgstr "Перенаправити роботу по каналу в команду" -#: ../../network/netconnect.pm:1 +#: ../../install_interactive.pm:1 #, c-format msgid "" -"\n" -"You can disconnect or reconfigure your connection." +"Some hardware on your computer needs ``proprietary'' drivers to work.\n" +"You can find some information about them at: %s" msgstr "" +"Деяк╕ з апаратних засоб╕в на Вашому комп'ютер╕ вимагають драйвер╕в\n" +"ф╕рм-виготовлювач╕в для того, щоб працювати в╕рно. \n" "\n" -"Ви можете в╕д'╓днатись або зм╕нити конф╕╜урац╕ю сво╓╖ мереж╕." - -#: ../../network/netconnect.pm:1 -#, c-format -msgid "You are currently connected to the Internet." -msgstr "З'╓днання з ╕нтернетом встановлено." - -#: ../../network/network.pm:1 -#, fuzzy, c-format -msgid "URL should begin with 'ftp:' or 'http:'" -msgstr "Вигляд URL ма╓ бути http:" - -#: ../../network/network.pm:1 -#, c-format -msgid "Proxy should be http://..." -msgstr "Вигляд прокс╕ ма╓ бути http://..." - -#: ../../network/network.pm:1 -#, c-format -msgid "FTP proxy" -msgstr "Прокс╕ FTP" +"Ви можете знайти потр╕бну ╕нформац╕ю про них на: %s" -#: ../../network/network.pm:1 +#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 #, c-format -msgid "HTTP proxy" -msgstr "Прокс╕ HTTP" +msgid "Detecting devices..." +msgstr "Визначаю пристро╖..." -#: ../../network/network.pm:1 +#: ../../standalone/drakconnect:1 #, c-format -msgid "Proxies configuration" -msgstr "Конф╕╜урац╕я прокс╕" - -#: ../../network/network.pm:1 -#, fuzzy, c-format -msgid "Gateway address should be in format 1.2.3.4" -msgstr "IP адреса ма╓ бути у формат╕ 1.2.3.4" - -#: ../../network/network.pm:1 -#, fuzzy, c-format -msgid "DNS server address should be in format 1.2.3.4" -msgstr "IP адреса ма╓ бути у формат╕ 1.2.3.4" +msgid "Click here to launch the wizard ->" +msgstr "" -#: ../../network/network.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Gateway device" -msgstr "Шлюзовий пристр╕й" +msgid "Haiti" +msgstr "Га╕т╕" -#: ../../network/network.pm:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "Gateway (e.g. %s)" +msgid "" +"Description of the fields:\n" +"\n" msgstr "" -#: ../../network/network.pm:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "DNS server" -msgstr "Сервер DNS" +msgid "the name of the CPU" +msgstr "" -#: ../../network/network.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "" -"Please enter your host name.\n" -"Your host name should be a fully-qualified host name,\n" -"such as ``mybox.mylab.myco.com''.\n" -"You may also enter the IP address of the gateway if you have one." -msgstr "" -"Введ╕ть, будь-ласка, назву Вашого хоста. Назва хоста повинна бути\n" -"повн╕стю квал╕ф╕кованою назвою хоста, такою, як, наприклад,\n" -"``mybox.mylab.myco.com''.\n" -"Ви також можете ввести IP адресу шлюза якщо Ви такий ма╓те." +msgid "Refreshing printer data..." +msgstr "Поновлюю дан╕ принтер╕в ..." -#: ../../network/network.pm:1 +#: ../../install2.pm:1 #, c-format -msgid "" -"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add " -"enough '0' (zeroes)." +msgid "You must also format %s" msgstr "" -#: ../../network/network.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "" -"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz " -"frequency), or add enough '0' (zeroes)." -msgstr "" +msgid "Be careful: this operation is dangerous." +msgstr "Обережно: ця операц╕я небезпечна." -#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "IP address should be in format 1.2.3.4" -msgstr "IP адреса ма╓ бути у формат╕ 1.2.3.4" +msgid "Insert a floppy containing package selection" +msgstr "Вставте дискету, з записаним списком пакет╕в" -#: ../../network/network.pm:1 +#: ../../diskdrake/dav.pm:1 #, fuzzy, c-format -msgid "Start at boot" -msgstr "Стартувати при завантаженн╕" +msgid "Server: " +msgstr "Сервер" -#: ../../network/network.pm:1 +#: ../../standalone/draksec:1 #, fuzzy, c-format -msgid "Assign host name from DHCP address" -msgstr "Випробуйте мишку, будь-ласка" +msgid "Security Alerts:" +msgstr "Встановлення р╕вня безпеки" -#: ../../network/network.pm:1 +#: ../../crypto.pm:1 ../../lang.pm:1 #, fuzzy, c-format -msgid "Network Hotplugging" -msgstr "Конф╕гурац╕я мереж╕" +msgid "Sweden" +msgstr "Дивись" -#: ../../network/network.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Track network card id (useful for laptops)" +msgid "Use Expect for SSH" msgstr "" -"Записати id плати мереж╕ (може знадобиться при користуванн╕ моб╕льним " -"комп'ютером)" - -#: ../../network/network.pm:1 -#, fuzzy, c-format -msgid "DHCP host name" -msgstr "Назва хоста" -#: ../../network/network.pm:1 ../../standalone/drakconnect:1 -#: ../../standalone/drakgw:1 +#: ../../lang.pm:1 #, c-format -msgid "Netmask" -msgstr "Маска мереж╕" +msgid "Poland" +msgstr "Польща" -#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1 -#: ../../standalone/drakconnect:1 +#: ../../install_steps_gtk.pm:1 #, c-format -msgid "IP address" -msgstr "IP-адреса" +msgid "Importance: %s\n" +msgstr "Важлив╕сть: %s\n" -#: ../../network/network.pm:1 +#: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "(bootp/dhcp/zeroconf)" -msgstr "(bootp/dhcp)" +msgid "Please check if you want to eject your tape after the backup." +msgstr "Вибер╕ть пакети, як╕ Ви хочете встановити" -#: ../../network/network.pm:1 +#: ../../network/drakfirewall.pm:1 +#, fuzzy, c-format +msgid "Other ports" +msgstr "Тестую порти" + +#: ../../harddrake/v4l.pm:1 #, c-format -msgid "Automatic IP" -msgstr "Автоматична конф╕гурац╕я IP" +msgid "number of capture buffers for mmap'ed capture" +msgstr "" -#: ../../network/network.pm:1 +#: ../../harddrake/data.pm:1 #, c-format -msgid " (driver %s)" -msgstr " (%s драйвер)" +msgid "SMBus controllers" +msgstr "" -#: ../../network/network.pm:1 +#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format -msgid "Configuring network device %s" -msgstr "Конф╕гурую пристр╕й мереж╕ %s" +msgid "Connection timeout (in sec)" +msgstr "Затримка перед закриттяс зв'язку (сек)" -#: ../../network/network.pm:1 +#: ../../standalone/harddrake2:1 #, c-format msgid "" -"Please enter the IP configuration for this machine.\n" -"Each item should be entered as an IP address in dotted-decimal\n" -"notation (for example, 1.2.3.4)." +"Some of the early i486DX-100 chips cannot reliably return to operating mode " +"after the \"halt\" instruction is used" msgstr "" -"Введ╕ть, будь-ласка, конф╕гурац╕ю IP для ц╕╓╖ машини. Кожен пункт\n" -"треба вводити як IP адресу в точково-десятков╕й нотац╕╖ (як,\n" -"наприклад, 1.2.3.4)" -#: ../../network/network.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "" -"WARNING: this device has been previously configured to connect to the " -"Internet.\n" -"Simply accept to keep this device configured.\n" -"Modifying the fields below will override this configuration." +msgid "Croatian" +msgstr "Хорватська" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "Use existing partition" +msgstr "Користуватися ╕снуючим п╕дрозд╕лом" + +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Unable to contact mirror %s" +msgstr "Неможливо виконати fork: %s" + +#: ../../standalone/logdrake:1 +#, c-format +msgid "/Help/_About..." +msgstr "/П╕дказка/Про..." + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Remove user directories before restore." msgstr "" -"УВАГА: Цей пристр╕й було попередньо настро╓но для з'╓днання з ╤нтернетом.\n" -"\n" -"Просто натисн╕ть \"Гаразд\" щоб зберегти конф╕╜урац╕ю пристрою.\n" -"Зм╕на пол╕в нижче приведе до зм╕ни конф╕╜урац╕╖ пристрою." -#: ../../network/shorewall.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format msgid "" -"Warning! An existing firewalling configuration has been detected. You may " -"need some manual fixes after installation." +"You are going to configure a remote printer. This needs working network " +"access, but your network is not configured yet. If you go on without network " +"configuration, you will not be able to use the printer which you are " +"configuring now. How do you want to proceed?" msgstr "" -"Увага! Знайдена ╕снуюча конф╕╜урац╕я firewall. Можливо Вам потр╕бно\n" -"буде виконати деяк╕ зм╕ни п╕сля установки." -#: ../../network/shorewall.pm:1 -#, c-format -msgid "Firewalling configuration detected!" -msgstr "Знайдено конф╕╜урац╕ю firewall!" +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "CUPS printer configuration" +msgstr "Зм╕нити конф╕гурац╕ю принтера" -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 +#: ../../standalone/drakfont:1 #, c-format -msgid "Account Password" -msgstr "Пароль у провайдера" +msgid "could not find any font in your mounted partitions" +msgstr "" -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "Account Login (user name)" -msgstr "Рахунок користувача (╕м'я користувача)" +msgid "F00f bug" +msgstr "" -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 +#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1 #, c-format -msgid "Connection timeout (in sec)" -msgstr "Затримка перед закриттяс зв'язку (сек)" +msgid "XFree %s" +msgstr "XFree86 %s" -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 +#: ../../network/ethernet.pm:1 #, c-format -msgid "Connection speed" -msgstr "Швидк╕сть зв'язку" +msgid "" +"Which dhcp client do you want to use?\n" +"Default is dhcp-client." +msgstr "" +"Який dhcp кл╕╓нт Ви хочете використовувати?\n" +"Стандартний кл╕╓нт - dhcp-client" -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Dialing mode" -msgstr "Режим зв'язку через модем" +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "Domain Name:" +msgstr "Назва домену" -#: ../../network/tools.pm:1 -#, c-format -msgid "Choose your country" -msgstr "Вибер╕ть кра╖ну" +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "On Floppy" +msgstr "Записати на дискету" -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Provider dns 2 (optional)" -msgstr "2й DNS провайдера (необов'язково)" +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Restore" +msgstr "В╕дновити з файлу" -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 +#: ../../security/help.pm:1 #, c-format -msgid "Provider dns 1 (optional)" -msgstr "1й DNS провайдера (необов'язково)" +msgid "if set to yes, check if the network devices are in promiscuous mode." +msgstr "" -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "Provider phone number" -msgstr "Номер телефону провайдера" +msgid "Looking for available packages..." +msgstr "Шукаю наявн╕ пакети" -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 +#: ../../any.pm:1 #, c-format -msgid "Provider name (ex provider.net)" -msgstr "Назва провайдера (тобто provider.net)" +msgid "Init Message" +msgstr "Пов╕домлення при завантаженн╕" -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 +#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format -msgid "Your personal phone number" -msgstr "Ваш особистий номер телефону" +msgid "Rescue partition table" +msgstr "Авар╕йна таблиця п╕дрозд╕л╕в" -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Card IO_1" -msgstr "В/В_1 картки" +#: ../../standalone/net_monitor:1 +#, fuzzy, c-format +msgid "Connection complete." +msgstr "Швидк╕сть зв'язку" -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 +#: ../../lang.pm:1 #, c-format -msgid "Card IO_0" -msgstr "В/В_0 картки" +msgid "Cyprus" +msgstr "К╕пр" -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Card IO" -msgstr "В/В картки" +msgid "Remove from RAID" +msgstr "Видалити з RAID" -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 -#, c-format -msgid "Card mem (DMA)" -msgstr "Пам'ять картки (DMA)" +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "This encryption key is too simple (must be at least %d characters long)" +msgstr "" +"Цей пароль занадто простий (в╕н повинен бути хоча б %d л╕тер завдовжки)" -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 +#: ../../standalone/drakbug:1 +#, fuzzy, c-format +msgid "Configuration Wizards" +msgstr "Пом╕чник конф╕гурац╕╖ мереж╕" + +#: ../../network/netconnect.pm:1 #, c-format -msgid "Card IRQ" -msgstr "Перепин картки" +msgid "ISDN connection" +msgstr "З'╓днання ISDN" -#: ../../network/tools.pm:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "Please fill or check the field below" -msgstr "Будь-ласка заповн╕ть або вибер╕ть поле внизу" +msgid "primary" +msgstr "" -#: ../../network/tools.pm:1 +#: ../../printer/main.pm:1 #, c-format -msgid "Connection Configuration" -msgstr "Конф╕гурац╕я з'╓днання" +msgid " on SMB/Windows server \"%s\", share \"%s\"" +msgstr "" -#: ../../network/tools.pm:1 +#: ../../help.pm:1 #, fuzzy, c-format msgid "" -"The system doesn't seem to be connected to the Internet.\n" -"Try to reconfigure your connection." +"This dialog is used to choose which services you wish to start at boot\n" +"time.\n" +"\n" +"DrakX will list all the services available on the current installation.\n" +"Review each one carefully and uncheck those which are not needed at boot\n" +"time.\n" +"\n" +"A short explanatory text will be displayed about a service when it is\n" +"selected. However, if you are not sure whether a service is useful or not,\n" +"it is safer to leave the default behavior.\n" +"\n" +"!! At this stage, be very careful if you intend to use your machine as a\n" +"server: you will probably not want to start any services that you do not\n" +"need. Please remember that several services can be dangerous if they are\n" +"enabled on a server. In general, select only the services you really need.\n" +"!!" msgstr "" -"Система зда╓ться не п╕дключена до ╕нтернету.\n" -"Спробуйте зм╕нити конф╕гурац╕ю свого з'╓днання." - -#: ../../network/tools.pm:1 -#, fuzzy, c-format -msgid "For security reasons, it will be disconnected now." -msgstr "З точки зору безпеки, ви будете зараз в╕д'╓днан╕." - -#: ../../network/tools.pm:1 -#, fuzzy, c-format -msgid "The system is now connected to the Internet." -msgstr "Система з'╓днана з ╕нтернетом." +"Ви можете вибрати як╕ серв╕си будуть запускатися автоматично при\n" +"старт╕ системи. \n" +"\n" +"Тут нада╓ться список вс╕х служб, що можуть встановлюватися програмою\n" +"установки. Перегляньте уважно ц╕ служби ╕ в╕дм╕н╕ть виб╕р тих, як╕ не\n" +"повинн╕ запускатися при старт╕ системи.\n" +"\n" +"Коли Ваша мишка насува╓ться на один ╕з пункт╕в, невеличка кулька ╕з\n" +"п╕дсказкою з'явиться, яка опису╓ функц╕╖ даного серв╕су.\n" +"\n" +"Будьте особливо уважними, якщо ви збира╓тесь використовувати цю\n" +"систему як сервер: напевне не потр╕бно стартувати н╕як╕ серв╕си, як╕\n" +"не будуть використовуватися. Пам'ятайте, будь-ласка, що деяк╕ вмикнен╕\n" +"серв╕си можуть бути небезпечними на сервер╕.\n" +"Як загальне правило, вибирайте т╕льки т╕ серв╕си, як╕ Вам справд╕ \n" +"необх╕дн╕." -#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 +#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1 #, c-format -msgid "Testing your connection..." -msgstr "Випробування з'╓днання..." +msgid "Skip" +msgstr "Пропустити" -#: ../../network/tools.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Do you want to try to connect to the Internet now?" -msgstr "Чи Ви хочете спробувати п╕дключитися до ╕нтернету зараз?" +msgid "Niue" +msgstr "Н╕уе" -#: ../../network/tools.pm:1 +#: ../../services.pm:1 #, c-format -msgid "Internet configuration" -msgstr "Конф╕гурац╕я ╕нтернету" +msgid "" +"Activates/Deactivates all network interfaces configured to start\n" +"at boot time." +msgstr "" +"Актив╕зу╓ та деактив╕зу╓ вс╕ ╕нтерфейси мереж╕, як╕ настро╓н╕\n" +"стартувати при завантаженн╕ системи." -#: ../../partition_table/raw.pm:1 -#, fuzzy, c-format +#: ../../standalone/harddrake2:1 +#, c-format msgid "" -"Something bad is happening on your drive. \n" -"A test to check the integrity of data has failed. \n" -"It means writing anything on the disk will end up with random, corrupted " -"data." +"the CPU frequency in MHz (Megahertz which in first approximation may be " +"coarsely assimilated to number of instructions the cpu is able to execute " +"per second)" msgstr "" -"Щось недобре в╕дбува╓ться на вашому диску.\n" -"Тестування ц╕л╕сност╕ даних було невдалим.\n" -"Це означа╓, що запис будь-чого на диск матиме сумний результат." -#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1 +#: ../../pkgs.pm:1 #, c-format -msgid " (Default)" -msgstr " (Основна)" +msgid "important" +msgstr "важливий" -#: ../../printer/cups.pm:1 +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Total Progress" +msgstr "" + +#: ../../help.pm:1 #, fuzzy, c-format -msgid "On CUPS server \"%s\"" -msgstr "IP адреса CUPS сервера" +msgid "" +"DrakX will first detect any IDE devices present in your computer. It will\n" +"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" +"found, DrakX will automatically install the appropriate driver.\n" +"\n" +"Because hardware detection is not foolproof, DrakX may fail in detecting\n" +"your hard drives. If so, you'll have to specify your hardware by hand.\n" +"\n" +"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n" +"want to configure options for it. You should allow DrakX to probe the\n" +"hardware for the card-specific options which are needed to initialize the\n" +"adapter. Most of the time, DrakX will get through this step without any\n" +"issues.\n" +"\n" +"If DrakX is not able to probe for the options to automatically determine\n" +"which parameters need to be passed to the hardware, you'll need to manually\n" +"configure the driver." +msgstr "" +"DrakX спробу╓ в╕дшукати вс╕ жорстк╕ диски у систем╕ ╕ одночасно\n" +"в╕дшукати плати PCI SCSI. Якщо DrakX знайде плату SCSI ╕ зна╓ який\n" +"драйвер використовувати з ц╕╓ю платою, в╕н автоматично встановить цей\n" +"драйвер (ц╕ драйвери).\n" +"\n" +"В деяких випадках не вся апаратура розп╕зна╓ться повн╕стю. Якщо ви не\n" +"ма╓те плати SCSI, ма╓те ISA SCSI плату, або PCI SCSI плату, яка не\n" +"розп╕зна╓ться DrakX, Вам буде задане запитання, про те чи ╓ у Ваш╕й\n" +"систем╕ SCSI плата. Якщо тако╖ плати у Вас нема╓, просто клацн╕ть на\n" +"\"Н╕\". Якщо ви клацнете на \"Так\", Вам буде надано список драйвер╕в, з\n" +"якого Вам треба вибрати потр╕бний.\n" +"\n" +"Якщо Вам потр╕бно буде вручну вибирати драйвер, DrakX запита╓ у Вас,\n" +"чи ви хочете вказати як╕сь певн╕ опц╕╖ для драйвера. Краще, якщо Ви\n" +"дозволите DrakX випробувати плату, щоб визначити потр╕бн╕\n" +"опц╕╖. Звично це працю╓ нормально.\n" +"\n" +"Якщо це не спрацю╓, Вам сл╕д вказати потр╕бн╕ опц╕╖ для\n" +"драйвера. Перегляньте \"Пос╕бник по установц╕\" (Розд╕л 3, п╕дрозд╕л\n" +"\"Знаходження ╕нформац╕╖ про Вашу апаратуру\"), з документац╕╖ по\n" +"апаратному забезпеченню або з домашньо╖ стор╕нки виробника апаратури\n" +"або д╕знайтеся потр╕бн╕ параметри з Windows (якщо ви ма╓те цю систему\n" +"на сво╓му комп'ютер╕)." -#: ../../printer/cups.pm:1 ../../printer/main.pm:1 +#: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "Remote Printers" -msgstr "В╕ддалений принтер" +msgid "Users" +msgstr "╤м'я користувача" -#: ../../printer/cups.pm:1 ../../printer/data.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "CUPS" -msgstr "CUPS" +msgid "Aruba" +msgstr "Аруба" -#: ../../printer/cups.pm:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "(on this machine)" -msgstr "(на ц╕й машин╕)" +msgid "Preparing bootloader..." +msgstr "Встановлюю завантажувальний блок" -#: ../../printer/cups.pm:1 +#: ../../network/network.pm:1 #, c-format -msgid "(on %s)" -msgstr "(на %s)" +msgid "Gateway (e.g. %s)" +msgstr "" -#: ../../printer/data.pm:1 +#: ../../any.pm:1 ../../install_steps_interactive.pm:1 #, c-format -msgid "CUPS - Common Unix Printing System" -msgstr "CUPS - Common Unix Printing System (Сп╕льна система друку для Юн╕кс)" +msgid "The passwords do not match" +msgstr "Парол╕ р╕зн╕" -#: ../../printer/data.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "LPRng" -msgstr "LPRng" +msgid "Examples for correct IPs:\n" +msgstr "" -#: ../../printer/data.pm:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "LPRng - LPR New Generation" -msgstr "LPRng - LPR New Generation (нове покол╕ння)" +msgid "Frequency (MHz)" +msgstr "" -#: ../../printer/data.pm:1 +#: ../../install_any.pm:1 #, c-format -msgid "LPD" -msgstr "LPD" +msgid "" +"To use this saved packages selection, boot installation with ``linux " +"defcfg=floppy''" +msgstr "" +"Для того, щоб використовувати записан╕ вибран╕ пакети, завантажте\n" +"систему з ``linux defcfg=floppy''" -#: ../../printer/data.pm:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "LPD - Line Printer Daemon" -msgstr "LPD - Line Printer Daemon" +msgid "the number of the processor" +msgstr "" -#: ../../printer/data.pm:1 +#: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format -msgid "PDQ" -msgstr "PDQ" +msgid "Hardware clock set to GMT" +msgstr "Годинник встановлено в GMT (час по ╫р╕нв╕чу)?" -#: ../../printer/data.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "PDQ - Print, Don't Queue" -msgstr "PDQ - Print, Don't Queue" +msgid "Give a file name" +msgstr "Дайте назву файлу" -#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1 +#: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "Unknown Model" -msgstr "Нев╕дома модель" +msgid "Please choose the port that your printer is connected to." +msgstr "Вибер╕ть до якого посл╕довного порта п╕дключений Ваш модем?" -#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 +#: ../../standalone/livedrake:1 #, c-format -msgid "Unknown model" -msgstr "Нев╕дома модель" +msgid "Change Cd-Rom" +msgstr "Зм╕н╕ть компакт-диск" -#: ../../printer/main.pm:1 -#, fuzzy, c-format -msgid "%s (Port %s)" -msgstr "Порт" +#: ../../lang.pm:1 +#, c-format +msgid "Paraguay" +msgstr "Парагвай" -#: ../../printer/main.pm:1 -#, fuzzy, c-format -msgid "Host %s" -msgstr "Назва хоста" +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Use Incremental/Differential Backups (do not replace old backups)" +msgstr "" -#: ../../printer/main.pm:1 -#, fuzzy, c-format -msgid "Network %s" -msgstr "Мережа:" +#: ../../harddrake/sound.pm:1 +#, c-format +msgid "There's no known driver for your sound card (%s)" +msgstr "" -#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Interface \"%s\"" -msgstr "╤нтерфейс %s" +#: ../../standalone/drakfloppy:1 +#, c-format +msgid "force" +msgstr "примусово" -#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Local network(s)" -msgstr "не знайдена плата мереж╕" +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Exit" +msgstr "Вих╕д" -#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Raw printer (No driver)" +msgid "" +"NOTE: Depending on the printer model and the printing system up to %d MB of " +"additional software will be installed." msgstr "" -#: ../../printer/main.pm:1 +#: ../../standalone/drakconnect:1 #, c-format -msgid ", using command %s" +msgid "" +"You don't have any configured interface.\n" +"Configure them first by clicking on 'Configure'" msgstr "" +"У вас нема╓ жодного сконф╕╜урованого ╕нтерфейса.\n" +"Сконф╕╜уруйте ╖х спочатку, клацнувши на \"Настро╖ти\"" -#: ../../printer/main.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid " on Novell server \"%s\", printer \"%s\"" -msgstr "" +msgid "Estonian" +msgstr "Естонська" -#: ../../printer/main.pm:1 +#: ../../services.pm:1 #, c-format -msgid " on SMB/Windows server \"%s\", share \"%s\"" +msgid "" +"Apache is a World Wide Web server. It is used to serve HTML files and CGI." msgstr "" +"Apache - це сервер для World Wide Web. В╕н використову╓ться для надання " +"серв╕с╕в\n" +"для файл╕в HTML та CGI." -#: ../../printer/main.pm:1 +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "Add/Del Clients" +msgstr "Кл╕╓нт DHCP" + +#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1 +#: ../../standalone/drakpxe:1 #, c-format -msgid ", TCP/IP host \"%s\", port %s" +msgid "Choose the network interface" +msgstr "Вибер╕ть ╕нтерфейс мереж╕" + +#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Unknown Model" +msgstr "Нев╕дома модель" + +#: ../../harddrake/data.pm:1 +#, c-format +msgid "CD/DVD burners" msgstr "" -#: ../../printer/main.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid " on LPD server \"%s\", printer \"%s\"" +msgid "" +"Partition booted by default\n" +" (for MS-DOS boot, not for lilo)\n" msgstr "" +"П╕дрозд╕л, який буде використовуватися для завантаження системи\n" +" (для завантаження ДОСу, не для lilo)\n" -#: ../../printer/main.pm:1 +#: ../../standalone/draksplash:1 #, fuzzy, c-format -msgid ", printing to %s" -msgstr "Помилка при запис╕ у файл %s" +msgid "choose image" +msgstr "Вибер╕ть файл" -#: ../../printer/main.pm:1 +#: ../../network/shorewall.pm:1 #, c-format -msgid ", multi-function device" -msgstr "" +msgid "Firewalling configuration detected!" +msgstr "Знайдено конф╕╜урац╕ю firewall!" -#: ../../printer/main.pm:1 +#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format -msgid ", multi-function device on HP JetDirect" -msgstr "" +msgid "Connection name" +msgstr "Назва зв'язку" -#: ../../printer/main.pm:1 +#: ../../standalone/draksplash:1 #, c-format -msgid ", multi-function device on USB" +msgid "" +"x coordinate of text box\n" +"in number of characters" msgstr "" -#: ../../printer/main.pm:1 +#: ../../install_steps_gtk.pm:1 #, c-format -msgid ", multi-function device on parallel port \\#%s" -msgstr "" +msgid "Updating package selection" +msgstr "Зберегти виб╕р пакет╕в" -#: ../../printer/main.pm:1 +#: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format -msgid ", USB printer" -msgstr "Нема╓ принтера" - -#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid ", USB printer \\#%s" -msgstr "" +msgid "Where do you want to mount the loopback file %s?" +msgstr "Де ви хочете змонтувати файл зворонього монтування %s?" -#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 +#: ../../standalone/drakautoinst:1 #, c-format -msgid " on parallel port \\#%s" +msgid "" +"The floppy has been successfully generated.\n" +"You may now replay your installation." msgstr "" +"Дискета створена усп╕шно.\n" +"Ви можете повторити установку." -#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 +#: ../../standalone/harddrake2:1 #, fuzzy, c-format -msgid "Local Printers" -msgstr "Локальний принтер" +msgid "the number of buttons the mouse has" +msgstr "Двох кнопочна" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "" +"Please enter the directory (or module) to\n" +" put the backup on this host." +msgstr "" -#: ../../printer/main.pm:1 +#: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format -msgid "Pipe job into a command" -msgstr "Перенаправити роботу по каналу в команду" +msgid "Replay" +msgstr "Повторити" -#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 -#, c-format -msgid "Enter a printer device URI" -msgstr "Введ╕ть URI пристрою принтера" +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Backup other files" +msgstr "Поганий резервний файл" -#: ../../printer/main.pm:1 +#: ../../install_steps.pm:1 #, c-format -msgid "Printer on NetWare server" -msgstr "Принтер на NetWare сервер╕" +msgid "No floppy drive available" +msgstr "Нема╓ привода дискети" -#: ../../printer/main.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Printer on SMB/Windows 95/98/NT server" -msgstr "Принтер на сервер╕ SMB/Windows 95/98/NT " +msgid "Backup files are corrupted" +msgstr "" -#: ../../printer/main.pm:1 -#, fuzzy, c-format -msgid "Network printer (TCP/Socket)" -msgstr "Принтер в мереж╕ (сокет)" +#: ../../standalone/drakxtv:1 +#, c-format +msgid "TV norm:" +msgstr "" -#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "Printer on remote lpd server" -msgstr "Принтер на в╕ддаленому сервер╕ lpd" +msgid "Cpuid family" +msgstr "" -#: ../../printer/main.pm:1 +#: ../../Xconfig/card.pm:1 #, c-format -msgid "Printer on remote CUPS server" -msgstr "Принтер на в╕ддаленому сервер╕ CUPS" +msgid "32 MB" +msgstr "32 Мб" -#: ../../printer/main.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Remote printer" -msgstr "В╕ддалений принтер" +msgid "Lithuanian AZERTY (new)" +msgstr "Литовська AZERTY (нова)" -#: ../../printer/main.pm:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "Local printer" -msgstr "Локальний принтер" +msgid "yes means the arithmetic coprocessor has an exception vector attached" +msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../fsedit.pm:1 #, fuzzy, c-format -msgid "Configuring applications..." -msgstr "Настроюю принтер \"%s\"..." +msgid "" +"You've selected a software RAID partition as root (/).\n" +"No bootloader is able to handle this without a /boot partition.\n" +"Please be sure to add a /boot partition" +msgstr "" +"В якост╕ п╕дрозд╕ла для root (/) ви вибрали програмний RAID.\n" +"Завантажувач╕ не мжоуть працювати з такими п╕дрозд╕лами без п╕дрозд╕лу\n" +"/boot. Тож, будь-ласка, не забудьте додати п╕дрозд╕л /boot." -#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1 +#: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "Printerdrake" -msgstr "Друкарка" +msgid "Previous" +msgstr "<- Попередн╕й" -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Removing printer \"%s\"..." -msgstr "Стираю принтер \"%s\" ..." +#: ../../any.pm:1 +#, c-format +msgid "Other OS (MacOS...)" +msgstr "╤нш╕ системи (MacOS...)" -#: ../../printer/printerdrake.pm:1 +#: ../../mouse.pm:1 #, c-format -msgid "Do you really want to remove the printer \"%s\"?" -msgstr "Чи Ви хочете видалити принтер \"%s\"?" +msgid "To activate the mouse," +msgstr "Щоб актив╕зувати мишку, " -#: ../../printer/printerdrake.pm:1 +#: ../../install_interactive.pm:1 #, c-format -msgid "Remove printer" -msgstr "Видалити принтер" +msgid "Bringing up the network" +msgstr "Вмикаю мережу" -#: ../../printer/printerdrake.pm:1 +#: ../../common.pm:1 #, fuzzy, c-format -msgid "Learn how to use this printer" -msgstr "Чи ви хочете випробувати нову конф╕╜урац╕ю?" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Print test pages" -msgstr "Друк тестових стор╕нок" +msgid "Screenshots will be available after install in %s" +msgstr "" +"Ви можете вибрати також ╕нш╕ мови, як╕ будуть доступн╕ в систем╕ п╕сля\n" +"установки" -#: ../../printer/printerdrake.pm:1 -#, c-format +#: ../../help.pm:1 +#, fuzzy, c-format msgid "" -"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP." +"More than one Microsoft partition has been detected on your hard drive.\n" +"Please choose which one you want to resize in order to install your new\n" +"Mandrake Linux operating system.\n" +"\n" +"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" +"\"Capacity\".\n" +"\n" +"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" +"\"partition number\" (for example, \"hda1\").\n" +"\n" +"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" +"\"sd\" if it is a SCSI hard drive.\n" +"\n" +"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"hard drives:\n" +"\n" +" * \"a\" means \"master hard drive on the primary IDE controller\";\n" +"\n" +" * \"b\" means \"slave hard drive on the primary IDE controller\";\n" +"\n" +" * \"c\" means \"master hard drive on the secondary IDE controller\";\n" +"\n" +" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" +"\n" +"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" +"\"second lowest SCSI ID\", etc.\n" +"\n" +"\"Windows name\" is the letter of your hard drive under Windows (the first\n" +"disk or partition is called \"C:\")." msgstr "" +"На Вашому диску знайдено б╕льше одного п╕дрозд╕ла, що належать\n" +"операц╕йн╕й систем╕ В╕ндовс. Вибер╕ть, будь-ласка, один з них, розм╕р\n" +"якого би ви хот╕ли зм╕нити, для того щоб встановити операц╕йну систему\n" +"Мандрейк Л╕накс.\n" +"\n" +"Кожен п╕дрозд╕л подано в такому вигляд╕: \"Назва в Л╕накс╕\", \"Назва у\n" +"В╕ндовс\", \"Розм╕р\".\n" +"\n" +"\"Назва в Л╕накс╕\" закодована таким чином: \"тип жорсткого диску\",\n" +"\"номер жорсткого диску\", \"номер п╕дрозд╕лу на диску\", (Наприклад:\n" +"\"hda1\").\n" +"\n" +"Тип жорсткого диску\" - це \"hd\", якщо ви ма╓те диск типу IDE, ╕ \"sd\",\n" +"якщо ви ма╓те жорсткий диск типу SCSI.\n" +"\n" +"\"Номер жорского диску\" - це завжди л╕тера п╕сля \"hd\" чи \"sd\". Для\n" +"диск╕в типу IDE це:\n" +"\n" +" * \"a\" - головний диск (master) на першому контролер╕ IDE,\n" +"\n" +" * \"b\" - вторинний (slave) диск на першому контролер╕ IDE,\n" +"\n" +" * \"c\" - головний диск на другому контролер╕ IDE,\n" +"\n" +" * \"d\" - вторинний диск на другому контролер╕ IDE.\n" +"\n" +"Для SCSI диск╕в \"a\" означа╓ \"головний диск\", \"b\" - другорядний диск, " +"╕\n" +"т.д. ...\n" +"\n" +"\"Назва у В╕ндовс\" - це л╕тера Вашого жорсткого диску, як ви ╖╖ бачите\n" +"при робот╕ у В╕ндовс (перший диск чи п╕дрозд╕л назива╓ться \"C:\")." -#: ../../printer/printerdrake.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "" -"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/" -"GIMP." +msgid "Tanzania" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Removing printer from Star Office/OpenOffice.org/GIMP" -msgstr "" +msgid "Computing FAT filesystem bounds" +msgstr "Обчислюю меж╕ п╕дрозд╕лу FAT" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Remove this printer from Star Office/OpenOffice.org/GIMP" +msgid "" +"\n" +"Backup Sources: \n" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/logdrake:1 #, c-format -msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP." -msgstr "" +msgid "Content of the file" +msgstr "Зм╕ст файлу" -#: ../../printer/printerdrake.pm:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "" -"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP." -msgstr "" +msgid "Authentication LDAP" +msgstr "Автентикац╕я LDAP" -#: ../../printer/printerdrake.pm:1 +#: ../../harddrake/sound.pm:1 #, c-format -msgid "Adding printer to Star Office/OpenOffice.org/GIMP" +msgid "Let me pick any driver" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/net_monitor:1 +#, fuzzy, c-format +msgid "Profile " +msgstr "Проф╕ль: " + +#: ../../standalone/net_monitor:1 #, c-format -msgid "Add this printer to Star Office/OpenOffice.org/GIMP" +msgid "transmitted" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "The printer \"%s\" is set as the default printer now." -msgstr "Принтер \"%s\" встановлено основним" +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Palestine" +msgstr "Зберегти виб╕р пакет╕в" -#: ../../printer/printerdrake.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Default printer" -msgstr "Стандартний принтер" +msgid "RAID md%s\n" +msgstr "RAID md%s\n" -#: ../../printer/printerdrake.pm:1 +#: ../../modules/parameters.pm:1 #, c-format -msgid "Set this printer as the default" -msgstr "Встановити як основний принтер" +msgid "%d comma separated strings" +msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "Printer options" -msgstr "Опц╕╖ принтера" +msgid "Here is the full list of keyboards available" +msgstr "Тут наведено повний список наявних клав╕атур" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/draksplash:1 +#, fuzzy, c-format +msgid "Theme name" +msgstr "Назва ресурсу" + +#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #, c-format -msgid "Printer manufacturer, model" -msgstr "Виробник принтера, модель" +msgid "/_Help" +msgstr "/П╕дказка" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/scannerdrake:1 #, c-format -msgid "Printer manufacturer, model, driver" -msgstr "Виробник принтера, модель, драйвер" +msgid "" +"Here you can choose whether the scanners connected to this machine should be " +"accessable by remote machines and by which remote machines." +msgstr "" -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Removing old printer \"%s\"..." -msgstr "Стираю дан╕ старого принтера \"%s\" ..." +#: ../../standalone/draksplash:1 +#, c-format +msgid "the width of the progress bar" +msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Printer name, description, location" -msgstr "Назва, опис, розташування принтера" +msgid "Cook Islands" +msgstr "Кука острови" -#: ../../printer/printerdrake.pm:1 +#: ../../fs.pm:1 #, c-format -msgid "Printer connection type" -msgstr "Тип з'╓днання принтера" +msgid "Formatting partition %s" +msgstr "Форматування п╕дрозд╕лу %s" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "Raw printer" -msgstr "Нема╓ принтера" +msgid "Hostname required" +msgstr "╤м'я хоста:" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakfont:1 #, c-format -msgid "Do it!" -msgstr "Виконати!" +msgid "Unselect fonts installed" +msgstr "" -#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1 -#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1 -#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1 +#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1 +#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1 +#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1 +#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 +#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1 +#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1 +#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1 +#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1 +#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1 +#: ../../standalone/drakgw:1 ../../standalone/draksec:1 +#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1 #, c-format -msgid "Close" -msgstr "Закрити" +msgid "Cancel" +msgstr "В╕дм╕нити" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/scannerdrake:1 #, fuzzy, c-format -msgid "" -"Printer %s\n" -"What do you want to modify on this printer?" -msgstr "" -"Принтер %s: %s %s\n" -"Що потр╕бно зм╕нити для цього принтера?" +msgid "Searching for configured scanners ..." +msgstr "Локальний принтер" -#: ../../printer/printerdrake.pm:1 +#: ../../mouse.pm:1 #, c-format -msgid "Modify printer configuration" -msgstr "Зм╕нити конф╕гурац╕ю принтера" +msgid "Wheel" +msgstr "Кол╕щатко" -#: ../../printer/printerdrake.pm:1 +#: ../../harddrake/data.pm:1 #, fuzzy, c-format -msgid "Add a new printer" -msgstr "Додати принтер" +msgid "Videocard" +msgstr "В╕део режим" -#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1 -#: ../../standalone/drakfloppy:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Normal Mode" -msgstr "Звичайний режим" +msgid "\tBackups use tar and bzip2\n" +msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 #, fuzzy, c-format -msgid "Change the printing system" -msgstr "Настро╖ти мережу" +msgid "Remove Selected" +msgstr "Видалити принтер" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/harddrake2:1 #, fuzzy, c-format -msgid "CUPS configuration" -msgstr "Конф╕╜урац╕я" +msgid "/Autodetect _modems" +msgstr "Користуватися автовизначенням" #: ../../printer/printerdrake.pm:1 #, c-format -msgid "Refresh printer list (to display all available remote CUPS printers)" +msgid "Remove printer" +msgstr "Видалити принтер" + +#: ../../install_interactive.pm:1 +#, fuzzy, c-format +msgid "" +"WARNING!\n" +"\n" +"DrakX will now resize your Windows partition. Be careful:\n" +"this operation is dangerous. If you have not already done\n" +"so, you should first exit the installation, run scandisk\n" +"under Windows (and optionally run defrag), then restart the\n" +"installation. You should also backup your data.\n" +"When sure, press Ok." msgstr "" +"УВАГА!\n" +"\n" +"Зараз DrakX потр╕бно зм╕нити розм╕р п╕дрозд╕лу ╕з Windows. Обережно:\n" +"ця операц╕я небезпечна. Якщо ви ще цього не зробили, Вам потр╕бно\n" +"зараз припиниту установку, скористатися програмою scandisk з Windows\n" +"(а кр╕м того, можливо, також дефрагментувати п╕дрозд╕л за допомогою\n" +"defrag) на цьому п╕дрозд╕л╕ та зробити резервну коп╕ю Ваших даних.\n" +"Коли все це зроблено - натисн╕ть Гаразд." -#: ../../printer/printerdrake.pm:1 +#: ../../network/drakfirewall.pm:1 #, c-format -msgid "Display all available remote CUPS printers" +msgid "Which services would you like to allow the Internet to connect to?" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "" -"The following printers are configured. Double-click on a printer to change " -"its settings; to make it the default printer; or to view information about " -"it." +"Welcome to the mail configuration utility.\n" +"\n" +"Here, you'll be able to set up the alert system.\n" msgstr "" -"Так╕ принтери вже сконф╕╜урован╕.\n" -"Ви можете або додати ще деяк╕, або зм╕нити т╕, що вже ╕снують." +"Ласкаво просимо до конф╕╜урац╕йно╖ програми для прокс╕.\n" +"\n" +"Тут Ви можете встановити прокс╕ для протокол╕в ftp та http з паролем\n" +"чи без. \n" -#: ../../printer/printerdrake.pm:1 +#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1 +#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1 #, c-format -msgid "Printing system: " -msgstr "Система друку: " +msgid "Other" +msgstr "╤нш╕" -#: ../../printer/printerdrake.pm:1 +#: ../../any.pm:1 ../../harddrake/v4l.pm:1 #, c-format -msgid "Checking installed software..." -msgstr "Перев╕рка встановленого програмного забезпечення..." +msgid "Default" +msgstr "Основна" -#: ../../printer/printerdrake.pm:1 +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Button 2 Emulation" +msgstr "Емуляц╕я 2 клав╕ш" + +#: ../../standalone/drakfont:1 +#, c-format +msgid "type1inst building" +msgstr "" + +#: ../../standalone/drakfont:1 #, fuzzy, c-format -msgid "Installing Foomatic..." -msgstr "Установка пакету %s" +msgid "Abiword" +msgstr "В╕дм╕нити" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/draksplash:1 #, fuzzy, c-format -msgid "Failed to configure printer \"%s\"!" -msgstr "Настроюю принтер \"%s\"..." +msgid "choose image file" +msgstr "Вибер╕ть файл" -#: ../../printer/printerdrake.pm:1 +#: ../../Xconfig/card.pm:1 +#, c-format +msgid "X server" +msgstr "X сервер" + +#: ../../install_steps_interactive.pm:1 #, fuzzy, c-format -msgid "Configuring printer \"%s\"..." -msgstr "Настроюю принтер \"%s\"..." +msgid "Domain Admin User Name" +msgstr "Назва домену" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakxtv:1 +#, fuzzy, c-format +msgid "There was an error while scanning for TV channels" +msgstr "Сталася помилка п╕д час установки пакет╕в: " + +#: ../../keyboard.pm:1 #, c-format -msgid "Reading printer data..." -msgstr "Читаю дан╕ принтер╕в ..." +msgid "US keyboard (international)" +msgstr "Клав╕атура США (м╕жнародна)" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakbug:1 +#, fuzzy, c-format +msgid "Not installed" +msgstr "Вийти з установки" + +#: ../../network/netconnect.pm:1 #, c-format -msgid "Which printing system (spooler) do you want to use?" -msgstr "Яку чергу друку (систему) Ви хочете вживати?" +msgid "LAN connection" +msgstr "З'╓днання через локальну мережу" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/logdrake:1 #, c-format -msgid "Select Printer Spooler" -msgstr "Вибер╕ть чергу друку для принтера" +msgid "/File/-" +msgstr "/Файл/-" -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Setting Default Printer..." -msgstr "Стандартний принтер" +#: ../../keyboard.pm:1 +#, c-format +msgid "Italian" +msgstr "╤тал╕йська" -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Installing %s ..." -msgstr "Установка пакету %s" +#: ../../interactive.pm:1 ../../standalone/draksec:1 +#, c-format +msgid "Basic" +msgstr "" -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Removing %s ..." -msgstr "Видалення LPD..." +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "" +"\n" +" Copyright (C) 2002 by MandrakeSoft \n" +"\tStew Benedict sbenedict\\@mandrakesoft.com\n" +"\n" +msgstr "" + +#: ../../lang.pm:1 +#, c-format +msgid "Honduras" +msgstr "Гондурас" + +#: ../../help.pm:1 +#, c-format +msgid "pdq" +msgstr "" + +#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 +#, c-format +msgid "Card IO" +msgstr "В/В картки" + +#: ../../standalone/drakperm:1 +#, c-format +msgid "when checked, owner and group won't be changed" +msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format msgid "" -"The printing system (%s) will not be started automatically when the machine " -"is booted.\n" -"\n" -"It is possible that the automatic starting was turned off by changing to a " -"higher security level, because the printing system is a potential point for " -"attacks.\n" "\n" -"Do you want to have the automatic starting of the printing system turned on " -"again?" +"This special Bootstrap\n" +"partition is for\n" +"dual-booting your system.\n" msgstr "" +"\n" +"Це спец╕альний п╕дрозд╕л для \n" +"можливост╕ подв╕йного \n" +"завантаження системи.\n" -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Starting the printing system at boot time" -msgstr "Яку систему друку Ви хочете використовувати?" - -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakautoinst:1 #, c-format msgid "" -"You are about to install the printing system %s on a system running in the %" -"s security level.\n" -"\n" -"This printing system runs a daemon (background process) which waits for " -"print jobs and handles them. This daemon is also accessable by remote " -"machines through the network and so it is a possible point for attacks. " -"Therefore only a few selected daemons are started by default in this " -"security level.\n" -"\n" -"Do you really want to configure printing on this machine?" +"Please choose for each step whether it will replay like your install, or it " +"will be manual" msgstr "" +"Для кожного кроку, будь ласка, вкаж╕ть чи при повторн╕й установц╕ цей\n" +"крок викона╓ться автоматично, чи вручну." -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/scannerdrake:1 #, c-format -msgid "Installing a printing system in the %s security level" +msgid "" +"You can also decide here whether scanners on remote machines should be made " +"available on this machine." msgstr "" -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "paranoid" -msgstr "Парано╕дальний" +#: ../../standalone/drakbackup:1 +#, c-format +msgid "\t-Network by FTP.\n" +msgstr "" -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "high" -msgstr "Високий" +#: ../../keyboard.pm:1 +#, c-format +msgid "Russian (Yawerty)" +msgstr "Рос╕йська (ЯВЕРТИ)" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "Restarting printing system..." -msgstr "Яку систему друку Ви хочете використовувати?" +msgid "You must enter a device or file name!" +msgstr "Введ╕ть URI пристрою принтера" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/harddrake2:1 #, fuzzy, c-format -msgid "Configuration of a remote printer" -msgstr "Настро╖ти принтер" +msgid "/_Quit" +msgstr "Вих╕д" -#: ../../printer/printerdrake.pm:1 +#: ../../network/adsl.pm:1 #, c-format msgid "" -"The network access was not running and could not be started. Please check " -"your configuration and your hardware. Then try to configure your remote " -"printer again." +"You need the alcatel microcode.\n" +"Download it at\n" +"http://www.speedtouchdsl.com/dvrreg_lx.htm\n" +"and copy the mgmt.o in /usr/share/speedtouch" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../Xconfig/various.pm:1 +#, c-format +msgid "Graphics memory: %s kB\n" +msgstr "В╕део пам'я╕ть: %sкб\n" + +#: ../../standalone.pm:1 #, c-format msgid "" -"The network configuration done during the installation cannot be started " -"now. Please check whether the network is accessable after booting your " -"system and correct the configuration using the Mandrake Control Center, " -"section \"Network & Internet\"/\"Connection\", and afterwards set up the " -"printer, also using the Mandrake Control Center, section \"Hardware\"/" -"\"Printer\"" +"This program is free software; you can redistribute it and/or modify\n" +"it under the terms of the GNU General Public License as published by\n" +"the Free Software Foundation; either version 2, or (at your option)\n" +"any later version.\n" +"\n" +"This program is distributed in the hope that it will be useful,\n" +"but WITHOUT ANY WARRANTY; without even the implied warranty of\n" +"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" +"GNU General Public License for more details.\n" +"\n" +"You should have received a copy of the GNU General Public License\n" +"along with this program; if not, write to the Free Software\n" +"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Configure the network now" -msgstr "Настро╖ти мережу" +#: ../../any.pm:1 +#, c-format +msgid "access to compilation tools" +msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "Go on without configuring the network" -msgstr "Конф╕гурую мережу" +msgid "Please select data to restore..." +msgstr "Вибер╕ть, будь-ласка, мову." -#: ../../printer/printerdrake.pm:1 +#: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "" -"You are going to configure a remote printer. This needs working network " -"access, but your network is not configured yet. If you go on without network " -"configuration, you will not be able to use the printer which you are " -"configuring now. How do you want to proceed?" +"If you plan to use aboot, be carefull to leave a free space (2048 sectors is " +"enough)\n" +"at the beginning of the disk" msgstr "" +"Якщо ви збира╓тесь користуватися aboot, не забудьте залишити в╕льний\n" +"розд╕л (достатньо 2048 сектор╕в) на початку диску" #: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Network functionality not configured" -msgstr "Мон╕тор не сконф╕╜урований" +#, c-format +msgid "Standard test page" +msgstr "Стандартна тестова стор╕нка" -#: ../../printer/printerdrake.pm:1 +#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Create" +msgstr "Створити" + +#: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "Starting network..." -msgstr "Починаю з'╓днання..." +msgid "What" +msgstr "Чекайте" -#: ../../printer/printerdrake.pm:1 +#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format -msgid "Refreshing printer data..." -msgstr "Поновлюю дан╕ принтер╕в ..." +msgid "There was an error ordering packages:" +msgstr "Сталася помилка п╕д час сортування пакет╕в: " -#: ../../printer/printerdrake.pm:1 +#: ../../keyboard.pm:1 #, fuzzy, c-format -msgid "" -"You have transferred your former default printer (\"%s\"), Should it be also " -"the default printer under the new printing system %s?" -msgstr "" -"Ви перенесли Ваш колишн╕й основний принтер (\"%s\"). Зробити так, щоб\n" -"цей принтер залишався основним ╕ в нов╕й систем╕ друку %s?" +msgid "Bulgarian (BDS)" +msgstr "Болгарська" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Transfer printer configuration" -msgstr "Перен╕с конф╕гурац╕╖ принтер╕в " +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "Disable Server" +msgstr "База даних" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Transferring %s..." -msgstr "Переношу %s ..." +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "Filesystem encryption key" +msgstr "Тип п╕дрозд╕лу: " -#: ../../printer/printerdrake.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "New printer name" -msgstr "Нова назва принтера" +msgid "Gujarati" +msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../interactive/stdio.pm:1 #, c-format msgid "" -"The printer \"%s\" already exists,\n" -"do you really want to overwrite its configuration?" +"Please choose the first number of the 10-range you wish to edit,\n" +"or just hit Enter to proceed.\n" +"Your choice? " msgstr "" -"Принтер з назвою \"%s\" вже ╕сну╓.\n" -"Ви д╕йсно бажа╓те переписати його конф╕╜урац╕ю?" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Name of printer should contain only letters, numbers and the underscore" -msgstr "" -"Назва принтера ма╓ складатися т╕льки з л╕тер, цифр та символа п╕дкреслення." +#: ../../standalone/draksplash:1 +#, fuzzy, c-format +msgid "Save theme" +msgstr "Встановити систему" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Transfer" -msgstr "Перенести" +#: ../../standalone/drakperm:1 +#, fuzzy, c-format +msgid "group" +msgstr "Робоча група" -#: ../../printer/printerdrake.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "" -"A printer named \"%s\" already exists under %s. \n" -"Click \"Transfer\" to overwrite it.\n" -"You can also type a new name or skip this printer." -msgstr "" -"Принтер з назвою \"%s\" вже ╕сну╓ в \"%s\". Натисн╕ть \"Перенести\" щоб\n" -"переписати його визначення. Ви можете також надрукувати нову назву чи\n" -"пропустити цей принтер." +msgid "Brazil" +msgstr "Бразил╕я" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakautoinst:1 +#, fuzzy, c-format +msgid "Auto Install" +msgstr "Установка" + +#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1 #, c-format -msgid "Do not transfer printers" -msgstr "Не переносити принтери" +msgid "Network Configuration Wizard" +msgstr "Пом╕чник конф╕гурац╕╖ мереж╕" -#: ../../printer/printerdrake.pm:1 +#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format -msgid "" -"\n" -"Mark the printers which you want to transfer and click \n" -"\"Transfer\"." -msgstr "" -"\n" -"Позначте принтери для переносу ╕ натисн╕ть на \"Перенести\"." +msgid "Removable media automounting" +msgstr "Автоматичне монтування зм╕нних нос╕╖в" -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "" -"\n" -"Also printers configured with the PPD files provided by their manufacturers " -"or with native CUPS drivers cannot be transferred." -msgstr "" -"\n" -"Кр╕м того, принтери сконф╕╜урован╕ за допомогою наданих виробниками\n" -"файл╕в PPD чи принтери, що мають р╕дн╕ драйвери CUPS не можуть бути\n" -"перенесеними." +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "Printing" +msgstr "Друк" -#: ../../printer/printerdrake.pm:1 +#: ../../harddrake/sound.pm:1 #, fuzzy, c-format -msgid "" -"In addition, queues not created with this program or \"foomatic-configure\" " -"cannot be transferred." -msgstr "" -"Додатково, черги не переносяться ц╕╓ю командою ╕ конф╕╜урац╕я\n" -"\"foomatic-configure\" не може бути перенесена також." +msgid "Unkown driver" +msgstr "Нев╕дома модель" #: ../../printer/printerdrake.pm:1 #, c-format -msgid "LPD and LPRng do not support IPP printers.\n" -msgstr "LPD та LPRng не п╕дтримують принтери IPP.\n" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format msgid "" -"PDQ only supports local printers, remote LPD printers, and Socket/TCP " -"printers.\n" +"There are no printers found which are directly connected to your machine" msgstr "" -"PDQ п╕дтриму╓ т╕льки локальн╕ принтери, в╕ддален╕ принтери LDP ╕\n" -"принтери, що працюють через Socket/TCP.\n" -#: ../../printer/printerdrake.pm:1 +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Create a new partition" +msgstr "Створити новий розд╕л" + +#: ../../harddrake/sound.pm:1 #, fuzzy, c-format -msgid "" -"CUPS does not support printers on Novell servers or printers sending the " -"data into a free-formed command.\n" -msgstr "" -"CUPS не п╕дтриму╓ друк на принтерах сервер╕в Novell чи принтер╕в, що\n" -"передають дан╕ на друк у вигляд╕ команд з дов╕льним синтаксисом.\n" +msgid "Driver:" +msgstr "Драйвер" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/harddrake2:1 #, fuzzy, c-format -msgid "" -"You can copy the printer configuration which you have done for the spooler %" -"s to %s, your current spooler. All the configuration data (printer name, " -"description, location, connection type, and default option settings) is " -"overtaken, but jobs will not be transferred.\n" -"Not all queues can be transferred due to the following reasons:\n" -msgstr "" -"Конф╕╜урац╕ю, що була п╕дготована для черги %s Ви можете скоп╕ювати\n" -"Для дано╖ установки черги друку (%s). Вс╕ установочн╕ дан╕ (назва\n" -"принтера, опис, розташування, тип з'╓днання ╕ стандартн╕ установки)\n" -"будуть перенесен╕ на нову конф╕╜урац╕ю. Але роботи з черги перенесено\n" -"не буде. Не вс╕ черги можуть бути перенесеними з таких причин: \n" +msgid "unknown" +msgstr "Нев╕дома модель" -#: ../../printer/printerdrake.pm:1 +#: ../../install_interactive.pm:1 #, c-format -msgid "" -"Your printer was configured automatically to give you access to the photo " -"card drives from your PC. Now you can access your photo cards using the " -"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> " -"\"MTools File Manager\") or the command line utilities \"mtools\" (enter " -"\"man mtools\" on the command line for more info). You find the card's file " -"system under the drive letter \"p:\", or subsequent drive letters when you " -"have more than one HP printer with photo card drives. In \"MtoolsFM\" you " -"can switch between drive letters with the field at the upper-right corners " -"of the file lists." +msgid "Use fdisk" +msgstr "Використовувати fdisk" + +#: ../../mouse.pm:1 +#, c-format +msgid "MOVE YOUR WHEEL!" +msgstr "ПОСУНЬТЕ КОЛ╤ЩАТКО!" + +#: ../../standalone/net_monitor:1 +#, c-format +msgid "sent: " msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../network/network.pm:1 +#, c-format +msgid "Automatic IP" +msgstr "Автоматична конф╕гурац╕я IP" + +#: ../../help.pm:1 #, c-format msgid "" -"Your multi-function device was configured automatically to be able to scan. " -"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the " -"scanner when you have more than one) from the command line or with the " -"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, " -"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire" -"\" menu. Call also \"man scanimage\" on the command line to get more " -"information.\n" +"There you are. Installation is now complete and your GNU/Linux system is\n" +"ready to use. Just click \"%s\" to reboot the system. The first thing you\n" +"should see after your computer has finished doing its hardware tests is the\n" +"bootloader menu, giving you the choice of which operating system to start.\n" "\n" -"Do not use \"scannerdrake\" for this device!" +"The \"%s\" button shows two more buttons to:\n" +"\n" +" * \"%s\": to create an installation floppy disk that will automatically\n" +"perform a whole installation without the help of an operator, similar to\n" +"the installation you just configured.\n" +"\n" +" Note that two different options are available after clicking the button:\n" +"\n" +" * \"%s\". This is a partially automated installation. The partitioning\n" +"step is the only interactive procedure.\n" +"\n" +" * \"%s\". Fully automated installation: the hard disk is completely\n" +"rewritten, all data is lost.\n" +"\n" +" This feature is very handy when installing a number of similar machines.\n" +"See the Auto install section on our web site for more information.\n" +"\n" +" * \"%s\"(*): saves a list of the packages selected in this installation.\n" +"To use this selection with another installation, insert the floppy and\n" +"start the installation. At the prompt, press the [F1] key and type >>linux\n" +"defcfg=\"floppy\" <<.\n" +"\n" +"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n" +"\"mformat a:\")" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../mouse.pm:1 #, c-format -msgid "Printing test page(s)..." -msgstr "Друкую тестову стор╕нку(стор╕нки)..." +msgid "Kensington Thinking Mouse" +msgstr "Kensington Thinking Mouse" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "Print option list" -msgstr "Опц╕╖ принтера" +msgid "Configuration of a remote printer" +msgstr "Настро╖ти принтер" -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Printing on the printer \"%s\"" -msgstr "Вимикаю мережу" +#: ../../lang.pm:1 +#, c-format +msgid "Moldova" +msgstr "Молдав╕я" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "Printing/Photo Card Access on \"%s\"" -msgstr "Вимикаю мережу" +msgid "Please check if you want to erase your tape before the backup." +msgstr "Вибер╕ть пакети, як╕ Ви хочете встановити" -#: ../../printer/printerdrake.pm:1 +#: ../../share/advertising/13-mdkexpert_corporate.pl:1 +#, c-format +msgid "An online platform to respond to enterprise support needs." +msgstr "" + +#: ../../network/network.pm:1 #, fuzzy, c-format -msgid "Printing/Scanning on \"%s\"" -msgstr "Вимикаю мережу" +msgid "URL should begin with 'ftp:' or 'http:'" +msgstr "Вигляд URL ма╓ бути http:" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakperm:1 #, fuzzy, c-format -msgid "Printing/Scanning/Photo Cards on \"%s\"" -msgstr "Вимикаю мережу" +msgid "Add a new rule at the end" +msgstr "Додати принтер" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" -"To know about the options available for the current printer read either the " -"list shown below or click on the \"Print option list\" button.%s%s%s\n" -"\n" +"You can also decide here whether printers on remote machines should be " +"automatically made available on this machine." msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../modules/interactive.pm:1 #, c-format msgid "" -"\n" -"The \"%s\" and \"%s\" commands also allow to modify the option settings for " -"a particular printing job. Simply add the desired settings to the command " -"line, e. g. \"%s \".\n" +"You may now provide options to module %s.\n" +"Options are in format ``name=value name2=value2 ...''.\n" +"For instance, ``io=0x300 irq=7''" msgstr "" +"ви можете тепер використовувати його опц╕╖ в модул╕ %s.\n" +"Опц╕╖ мають формат ``назва=величина назва2=величина2 ...''.\n" +"Наприклад, ``io=0x300 irq=7''" -#: ../../printer/printerdrake.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "" -"You can also use the graphical interface \"xpdq\" for setting options and " -"handling printing jobs.\n" -"If you are using KDE as desktop environment you have a \"panic button\", an " -"icon on the desktop, labeled with \"STOP Printer!\", which stops all print " -"jobs immediately when you click it. This is for example useful for paper " -"jams.\n" -msgstr "" +msgid "Quit without writing the partition table?" +msgstr "Вийти без запису таблиц╕ п╕дрозд╕л╕в?" -#: ../../printer/printerdrake.pm:1 +#: ../../mouse.pm:1 #, c-format -msgid "" -"This command you can also use in the \"Printing command\" field of the " -"printing dialogs of many applications. But here do not supply the file name " -"because the file to print is provided by the application.\n" -msgstr "" +msgid "Genius NetScroll" +msgstr "Genius NetScroll" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"To print a file from the command line (terminal window) use the command \"%s " -"\" or \"%s \".\n" -msgstr "" +#: ../../standalone.pm:1 +#, fuzzy, c-format +msgid "Installing packages..." +msgstr "Установка пакету %s" -#: ../../printer/printerdrake.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "" -"To get a list of the options available for the current printer click on the " -"\"Print option list\" button." -msgstr "" +msgid "Dutch" +msgstr "Датська" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"\n" -"The \"%s\" command also allows to modify the option settings for a " -"particular printing job. Simply add the desired settings to the command " -"line, e. g. \"%s \". " -msgstr "" +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "The following packages need to be installed:\n" +msgstr "Ц╕ пакети будуть встановленими" -#: ../../printer/printerdrake.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "" -"To print a file from the command line (terminal window) use the command \"%s " -"\".\n" -msgstr "" +msgid "Angola" +msgstr "Ангола" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/logdrake:1 +#, fuzzy, c-format +msgid "service setting" +msgstr "ц╕каво" + +#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1 #, c-format -msgid "" -"Here is a list of the available printing options for the current printer:\n" -"\n" +msgid "Custom" +msgstr "Спец╕альний" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "File is already used by another loopback, choose another one" msgstr "" +"╤нший пристр╕й зворотнього монтування вже користу╓ться цим\n" +"файлом. Вибер╕ть ╕нший." -#: ../../printer/printerdrake.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "" -"These commands you can also use in the \"Printing command\" field of the " -"printing dialogs of many applications, but here do not supply the file name " -"because the file to print is provided by the application.\n" +msgid "Read-only" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "" -"To print a file from the command line (terminal window) you can either use " -"the command \"%s \" or a graphical printing tool: \"xpp \" or " -"\"kprinter \". The graphical tools allow you to choose the printer and " -"to modify the option settings easily.\n" +msgid "Latvia" +msgstr "Латв╕я" + +#: ../../harddrake/sound.pm:1 +#, c-format +msgid "No known driver" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../Xconfig/card.pm:1 #, c-format -msgid "Did it work properly?" -msgstr "Спрацювало нормально?" +msgid "1 MB" +msgstr "1 Мб" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" -"Test page(s) have been sent to the printer.\n" -"It may take some time before the printer starts.\n" +"If it is not the one you want to configure, enter a device name/file name in " +"the input line" msgstr "" -"Тестова стор╕нка передана програм╕ друку.\n" -"Перед тим, як принтер почне друкувати, можливо пройде\n" -"деякий час. Чи в╕н працю╓ коректно?\n" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/draksound:1 #, c-format msgid "" -"Test page(s) have been sent to the printer.\n" -"It may take some time before the printer starts.\n" -"Printing status:\n" -"%s\n" +"No Sound Card has been detected on your machine. Please verify that a Linux-" +"supported Sound Card is correctly plugged in.\n" "\n" -msgstr "" -"Тестова стор╕нка передана програм╕ друку.\n" -"Перед тим, як принтер почне друкувати, можливо пройде \n" -"деякий час.\n" -"Статус друку:\n" -"%s\n" "\n" +"You can visit our hardware database at:\n" +"\n" +"\n" +"http://www.linux-mandrake.com/en/hardware.php3" +msgstr "" -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Do not print any test page" -msgstr "Друк тестових стор╕нок" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Photo test page" -msgstr "Тестова стор╕нка фотограф╕чно╖ якост╕" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Alternative test page (A4)" -msgstr "Додаткова тестова стор╕нка (A4)" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Alternative test page (Letter)" -msgstr "Додаткова тестова стор╕нка (Letter)" - -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakconnect:1 #, c-format -msgid "Standard test page" -msgstr "Стандартна тестова стор╕нка" +msgid "Configure Local Area Network..." +msgstr "Настро╖ти локальну мережу..." -#: ../../printer/printerdrake.pm:1 +#: ../../services.pm:1 #, c-format -msgid "Print" -msgstr "Друк" +msgid "Launch the sound system on your machine" +msgstr "Запуск звуково╖ системи на ваш╕й машин╕" #: ../../printer/printerdrake.pm:1 #, c-format -msgid "No test pages" -msgstr "Нема╓ тестових стор╕нок" +msgid "Preparing printer database..." +msgstr "Готуються дан╕ принтер╕в ..." -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/harddrake2:1 #, fuzzy, c-format -msgid "" -"Please select the test pages you want to print.\n" -"Note: the photo test page can take a rather long time to get printed and on " -"laser printers with too low memory it can even not come out. In most cases " -"it is enough to print the standard test page." -msgstr "" -"Вибер╕ть, будь ласка, стор╕нки для друку\n" -"Зауважте: друк фотограф╕чних тестових стор╕нок може бути довгим ╕\n" -"лазерн╕ принтери з невеликим об'╓мом пам'ят╕ можуть нав╕ть зовс╕м не\n" -"надрукувати таку стор╕нку. У б╕льшост╕ випадк╕д достатньо надрукувати\n" -"стандартну пробну стор╕нку." +msgid "Information" +msgstr "Показ ╕нформац╕╖" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Test pages" -msgstr "Тестую стор╕нки" +#: ../../network/drakfirewall.pm:1 +#, fuzzy, c-format +msgid "No network card" +msgstr "не знайдена плата мереж╕" -#: ../../printer/printerdrake.pm:1 +#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 #, c-format -msgid "" -"Do you want to set this printer (\"%s\")\n" -"as the default printer?" -msgstr "" -"Встановити принтер \"%s\"\n" -"як стандартний?" +msgid "Which filesystem do you want?" +msgstr "Яку файлову систему ви вибира╓те?" -#: ../../printer/printerdrake.pm:1 +#: ../../mouse.pm:1 #, c-format -msgid "Option %s out of range!" -msgstr "Параметр %s виходить за рамки дозволених меж!" +msgid "3 buttons" +msgstr "Трьох кнопочна" -#: ../../printer/printerdrake.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Option %s must be a number!" -msgstr "Параметр %s ма╓ бути числом!" +msgid "Detailed information" +msgstr "Детальна ╕нформац╕я" -#: ../../printer/printerdrake.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Option %s must be an integer number!" -msgstr "Параметр %s ма╓ бути ц╕лим числом!" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Printer default settings" -msgstr "Виб╕р модел╕ принтера" +msgid "Malta" +msgstr "Мальта" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format @@ -11021,435 +10166,401 @@ msgstr "" "присутня) встановлен╕ в╕рно. Зауважте, що з швидк╕сть друку з\n" "надзвичайно високою як╕стю може бути значно пов╕льн╕ша." -#: ../../printer/printerdrake.pm:1 +#: ../../install_any.pm:1 #, c-format -msgid "Firmware-Upload for HP LaserJet 1000" -msgstr "" +msgid "This floppy is not FAT formatted" +msgstr "Ця дискета не в╕дформатована як FAT" -#: ../../printer/printerdrake.pm:1 +#: ../../network/ethernet.pm:1 ../../network/network.pm:1 +#, c-format +msgid "Configuring network" +msgstr "Конф╕гурую мережу" + +#: ../../Xconfig/main.pm:1 +#, fuzzy, c-format +msgid "Graphic Card" +msgstr "В╕део плата" + +#: ../../install_interactive.pm:1 +#, c-format +msgid "Resizing Windows partition" +msgstr "Обчислюю меж╕ п╕дрозд╕лу Windows" + +#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 +#, c-format +msgid "Provider dns 1 (optional)" +msgstr "1й DNS провайдера (необов'язково)" + +#: ../../lang.pm:1 +#, c-format +msgid "Cameroon" +msgstr "Камерун" + +#: ../../install_interactive.pm:1 #, c-format msgid "" -"To be able to print with your Lexmark inkjet and this configuration, you " -"need the inkjet printer drivers provided by Lexmark (http://www.lexmark." -"com/). Click on the \"Drivers\" link. Then choose your model and afterwards " -"\"Linux\" as operating system. The drivers come as RPM packages or shell " -"scripts with interactive graphical installation. You do not need to do this " -"configuration by the graphical frontends. Cancel directly after the license " -"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and " -"adjust the head alignment settings with this program." +"You can now partition %s.\n" +"When you are done, don't forget to save using `w'" msgstr "" +"Тепер ви можете розбити на п╕дрозд╕ли Ваш диск %s.\n" +"П╕сля того, як ви зак╕нчите не забудьте виконати команду `w'" -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Lexmark inkjet configuration" -msgstr "Конф╕гурац╕я ╕нтернету" +#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1 +#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1 +#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1 +#, c-format +msgid "Close" +msgstr "Закрити" -#: ../../printer/printerdrake.pm:1 +#: ../../help.pm:1 #, c-format msgid "" -"The inkjet printer drivers provided by Lexmark only support local printers, " -"no printers on remote machines or print server boxes. Please connect your " -"printer to a local port or configure it on the machine where it is connected " -"to." +"\"%s\": check the current country selection. If you are not in this\n" +"country, click on the \"%s\" button and choose another one. If your country\n" +"is not in the first list shown, click the \"%s\" button to get the complete\n" +"country list." msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/logdrake:1 +#, c-format +msgid "Calendar" +msgstr "Календар" + +#: ../../standalone/drakbackup:1 #, c-format msgid "" -"You are configuring an OKI laser winprinter. These printers\n" -"use a very special communication protocol and therefore they work only when " -"connected to the first parallel port. When your printer is connected to " -"another port or to a print server box please connect the printer to the " -"first parallel port before you print a test page. Otherwise the printer will " -"not work. Your connection type setting will be ignored by the driver." +"Restore Selected\n" +"Catalog Entry" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "OKI winprinter configuration" -msgstr "Зм╕нити конф╕гурац╕ю принтера" +msgid "" +"To use a remote lpd printer, you need to supply the hostname of the printer " +"server and the printer name on that server." +msgstr "" +"Щоб використовувати в╕ддалений lpd принтер, Ви ма╓те вказати назву\n" +"хоста принт-сервера та назву принтера на цьому хост╕." -#: ../../printer/printerdrake.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "" -"If your printer is not listed, choose a compatible (see printer manual) or a " -"similar one." +msgid "Iceland" +msgstr "╤сланд╕я" + +#: ../../common.pm:1 +#, c-format +msgid "consolehelper missing" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../services.pm:1 +#, c-format +msgid "stopped" +msgstr "зупинено" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "Whether the FPU has an irq vector" +msgstr "" + +#: ../../diskdrake/hd_gtk.pm:1 +#, c-format +msgid "Ext2" +msgstr "Ext2" + +#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 +#, c-format +msgid "Expand Tree" +msgstr "Розширити дерево" + +#: ../../harddrake/sound.pm:1 #, c-format msgid "" +"The old \"%s\" driver is blacklisted.\n" "\n" +"It has been reported to oops the kernel on unloading.\n" "\n" -"Please check whether Printerdrake did the auto-detection of your printer " -"model correctly. Find the correct model in the list when a wrong model or " -"\"Raw printer\" is highlighted." +"The new \"%s\" driver'll only be used on next bootstrap." msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Which printer model do you have?" -msgstr "Яку модель принтера Ви ма╓те" - -#: ../../printer/printerdrake.pm:1 +#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 +#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1 #, c-format -msgid "Printer model selection" -msgstr "Виб╕р модел╕ принтера" +msgid "Expert Mode" +msgstr "Експертний режим" #: ../../printer/printerdrake.pm:1 #, c-format -msgid "Reading printer database..." -msgstr "Читаю дан╕ принтер╕в ..." +msgid "Printer options" +msgstr "Опц╕╖ принтера" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakgw:1 #, fuzzy, c-format -msgid "Select model manually" -msgstr "Назва в╕ддаленого принтер" +msgid "Local Network adress" +msgstr "не знайдена плата мереж╕" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "The model is correct" -msgstr "Все в╕рно?" +msgid "Backup your System files. (/etc directory)" +msgstr "Поганий резервний файл" -#: ../../printer/printerdrake.pm:1 +#: ../../install_steps_interactive.pm:1 #, c-format msgid "" -"Printerdrake has compared the model name resulting from the printer auto-" -"detection with the models listed in its printer database to find the best " -"match. This choice can be wrong, especially when your printer is not listed " -"at all in the database. So check whether the choice is correct and click " -"\"The model is correct\" if so and if not, click \"Select model manually\" " -"so that you can choose your printer model manually on the next screen.\n" +"You now have the opportunity to download updated packages. These packages\n" +"have been updated after the distribution was released. They may\n" +"contain security or bug fixes.\n" "\n" -"For your printer Printerdrake has found:\n" +"To download these packages, you will need to have a working Internet \n" +"connection.\n" "\n" -"%s" +"Do you want to install the updates ?" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/logdrake:1 #, fuzzy, c-format -msgid "Your printer model" -msgstr "Назва в╕ддаленого принтер" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Preparing printer database..." -msgstr "Готуються дан╕ принтер╕в ..." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Location" -msgstr "Розташування" - -#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1 -#, c-format -msgid "Description" -msgstr "Опис" +msgid "Samba Server" +msgstr "Сервер NIS" -#: ../../printer/printerdrake.pm:1 +#: ../../security/help.pm:1 #, c-format -msgid "Name of printer" -msgstr "Назва принтера" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format msgid "" -"Every printer needs a name (for example \"printer\"). The Description and " -"Location fields do not need to be filled in. They are comments for the users." -msgstr "" -"Кожному принтеру повинна в╕дпов╕дати назва (наприклад lp).\n" -"Поля Опис та Розташування заповнювати необов'язково. Вони ╓\n" -"лиш коментарями для користувач╕в." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Enter Printer Name and Comments" +"Arguments: (arg, alert=1)\n" +"\n" +"Enable/Disable IP spoofing protection." msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakxtv:1 #, c-format -msgid "Making printer port available for CUPS..." +msgid "Australian Optus cable TV" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../install_steps_newt.pm:1 #, c-format -msgid "Checking device and configuring HPOJ..." +msgid "" +" / between elements | selects | next screen " msgstr "" +" / м╕ж елементами | виб╕р | наступний екран" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakTermServ:1 #, c-format -msgid "Photo memory card access on your HP multi-function device" +msgid "Subnet:" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Scanning on your HP multi-function device" -msgstr "" +msgid "Zimbabwe" +msgstr "З╕мбабве" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "Installing mtools packages..." -msgstr "Установка пакету %s" +msgid "Please enter the host name or IP." +msgstr "Випробуйте мишку, будь-ласка" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "Installing SANE packages..." -msgstr "Установка пакету %s" +msgid "When" +msgstr "Кол╕щатко" -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Installing HPOJ package..." -msgstr "Установка пакету %s" +#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 +#, c-format +msgid "Second DNS Server (optional)" +msgstr "Другий сервер DNS(необов'язково)" -#: ../../printer/printerdrake.pm:1 +#: ../../lang.pm:1 +#, c-format +msgid "Finland" +msgstr "Ф╕нлянд╕я" + +#: ../../security/help.pm:1 #, c-format msgid "" -"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, " -"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP " -"PhotoSmart or an HP LaserJet 2200?" +"Arguments: (arg)\n" +"\n" +"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if " +"\\fIarg\\fP = ALL. Only local ones\n" +"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the " +"services you need, use /etc/hosts.allow\n" +"(see hosts.allow(5))." msgstr "" -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "A command line must be entered!" -msgstr "Потр╕бно ввести коректний URI!" +#: ../../Xconfig/various.pm:1 +#, c-format +msgid "Color depth: %s\n" +msgstr "Глибина кольору: %s\n" -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Command line" -msgstr "Назва домену" +#: ../../install_steps_gtk.pm:1 +#, c-format +msgid "You can't unselect this package. It must be upgraded" +msgstr "Виб╕р цього пакету неможливо в╕дм╕нити. В╕н повинен бути поновлений." -#: ../../printer/printerdrake.pm:1 +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Loading from floppy" +msgstr "В╕дновлюю з дискети" + +#: ../../standalone/drakperm:1 #, c-format msgid "" -"Here you can specify any arbitrary command line into which the job should be " -"piped instead of being sent directly to a printer." +"Drakperm is used to see files to use in order to fix permissions, owners, " +"and groups via msec.\n" +"You can also edit your own rules which will owerwrite the default rules." msgstr "" -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Pipe into command" -msgstr "Перенаправити роботу по каналу в команду" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Detected model: %s %s" -msgstr "знайдено %s" - -#: ../../printer/printerdrake.pm:1 +#: ../../ugtk.pm:1 #, c-format -msgid "A valid URI must be entered!" -msgstr "Потр╕бно ввести коректний URI!" +msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" +msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" -#: ../../printer/printerdrake.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Printer Device URI" -msgstr "URI пристрою принтера" +msgid "Slovenia" +msgstr "Словен╕я" -#: ../../printer/printerdrake.pm:1 +#: ../../any.pm:1 #, c-format msgid "" -"You can specify directly the URI to access the printer. The URI must fulfill " -"either the CUPS or the Foomatic specifications. Note that not all URI types " -"are supported by all the spoolers." +"Enter a user\n" +"%s" msgstr "" -"Можна вказати безпосередньо URI для доступу до принтера. URI ма╓\n" -"в╕дпов╕дати специф╕кац╕ям або CUPS або Foomatic. Зауважте, однак, що\n" -"не вс╕ типи URI п╕дтримуються засобами керування черг друку." +"Введ╕ть користувача\n" +"%s" -#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "Port" -msgstr "Порт" +msgid "" +"- PCI and USB devices: this lists the vendor, device, subvendor and " +"subdevice PCI/USB ids" +msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/draksplash:1 #, fuzzy, c-format -msgid "Printer host name or IP" -msgstr "Назва хоста принтера" +msgid "ProgressBar color selection" +msgstr "Виб╕р модел╕ принтера" -#: ../../printer/printerdrake.pm:1 +#: ../../any.pm:1 #, c-format -msgid "The port number should be an integer!" -msgstr "Номер порта ма╓ бути ц╕лим числом!" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Printer host name or IP missing!" -msgstr "Нема╓ назви хоста принтера!" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format msgid "" -"To print to a TCP or socket printer, you need to provide the host name or IP " -"of the printer and optionally the port number (default is 9100). On HP " -"JetDirect servers the port number is usually 9100, on other servers it can " -"vary. See the manual of your hardware." +"Here are the entries on your boot menu so far.\n" +"You can create additional entries or change the existing ones." msgstr "" -"Щоб друкувати на принтер╕ в мереж╕, Вам потр╕бно надати назву хоста\n" -"принтера, та можливо номер порта. На серверах HP JetDirect номер порта\n" -"у б╕льшост╕ випадк╕в 9100, на ╕нших може\n" -"в╕др╕знятись. Проконсультуйтесь з ╕нструкц╕╓ю до апаратного\n" -"забезпечення." +"Тут наведен╕ р╕зноман╕тн╕ пункти.\n" +"ви можете або додати ще деяк╕, або зм╕нити т╕, що вже ╕снують." -#: ../../printer/printerdrake.pm:1 +#: ../../help.pm:1 #, c-format -msgid "" -"Choose one of the auto-detected printers from the list or enter the hostname " -"or IP and the optional port number (default is 9100) in the input fields." -msgstr "" +msgid "/dev/hda" +msgstr "/dev/hda" -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "TCP/Socket Printer Options" -msgstr "Параметри принтера в мереж╕" +#: ../../help.pm:1 +#, c-format +msgid "/dev/hdb" +msgstr "/dev/hdb" -#: ../../printer/printerdrake.pm:1 +#: ../../services.pm:1 #, c-format -msgid "Host \"%s\", port %s" +msgid "" +"Runs commands scheduled by the at command at the time specified when\n" +"at was run, and runs batch commands when the load average is low enough." msgstr "" +"Викону╓ команди, запланован╕ командою at п╕д час виконання команди at\n" +"╕ викону╓ пакетн╕ команди, коли системне навантаження достатньо\n" +"низьке. " -#: ../../printer/printerdrake.pm:1 +#: ../../harddrake/v4l.pm:1 #, c-format -msgid ", host \"%s\", port %s" +msgid "Radio support:" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "Scanning network..." -msgstr "Починаю з'╓днання..." - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Printer auto-detection" -msgstr "Користуватися автовизначенням" +msgid "Installing SANE packages..." +msgstr "Установка пакету %s" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakfloppy:1 #, c-format -msgid "NCP queue name missing!" -msgstr "Нема╓ назви черги NCP!" +msgid "boot disk creation" +msgstr "створення завантажувального диску" -#: ../../printer/printerdrake.pm:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "NCP server name missing!" -msgstr "Нема╓ назви сервера NCP!" +msgid "LDAP" +msgstr "LDAP" -#: ../../printer/printerdrake.pm:1 +#: ../../bootloader.pm:1 #, c-format -msgid "Print Queue Name" -msgstr "Назва принтера" +msgid "SILO" +msgstr "SILO" -#: ../../printer/printerdrake.pm:1 +#: ../../diskdrake/removable.pm:1 #, c-format -msgid "Printer Server" -msgstr "Принтер сервер" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "" -"To print on a NetWare printer, you need to provide the NetWare print server " -"name (Note! it may be different from its TCP/IP hostname!) as well as the " -"print queue name for the printer you wish to access and any applicable user " -"name and password." -msgstr "" -"Для того, щоб друкувати на NetWare принт-сервер╕, Ви повинн╕\n" -"вказати назву принт-сервера (Зауважте! вона може в╕др╕знятися в╕д\n" -"TCP/IP ╕мен╕ хоста!) разом з назвою принтера, яким Ви хочете\n" -"користуватися та в╕дпов╕дним ╕менем користувача з паролем." +msgid "Change type" +msgstr "Зм╕нити тип" -#: ../../printer/printerdrake.pm:1 +#: ../../any.pm:1 #, c-format -msgid "NetWare Printer Options" -msgstr "Опц╕╖ принтера NetWare" +msgid "SILO Installation" +msgstr "Установка SILO" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "" -"Connect your printer to a Linux server and let your Windows machine(s) " -"connect to it as a client.\n" -"\n" -"Do you really want to continue setting up this printer as you are doing now?" +msgid "Use CD/DVDROM to backup" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../install_messages.pm:1 #, c-format msgid "" -"Set up your Windows server to make the printer available under the IPP " -"protocol and set up printing from this machine with the \"%s\" connection " -"type in Printerdrake.\n" +"Congratulations, installation is complete.\n" +"Remove the boot media and press return to reboot.\n" "\n" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "" -"You are about to set up printing to a Windows account with password. Due to " -"a fault in the architecture of the Samba client software the password is put " -"in clear text into the command line of the Samba client used to transmit the " -"print job to the Windows server. So it is possible for every user on this " -"machine to display the password on the screen by issuing commands as \"ps " -"auxwww\".\n" "\n" -"We recommend to make use of one of the following alternatives (in all cases " -"you have to make sure that only machines from your local network have access " -"to your Windows server, for example by means of a firewall):\n" +"For information on fixes which are available for this release of Mandrake " +"Linux,\n" +"consult the Errata available from:\n" "\n" -"Use a password-less account on your Windows server, as the \"GUEST\" account " -"or a special account dedicated for printing. Do not remove the password " -"protection from a personal account or the administrator account.\n" "\n" -"Set up your Windows server to make the printer available under the LPD " -"protocol. Then set up printing from this machine with the \"%s\" connection " -"type in Printerdrake.\n" +"%s\n" "\n" +"\n" +"Information on configuring your system is available in the post\n" +"install chapter of the Official Mandrake Linux User's Guide." msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "SECURITY WARNING!" -msgstr "" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Samba share name missing!" -msgstr "Нема╓ назви ресурсу samba!" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Either the server name or the server's IP must be given!" -msgstr "Мають бути вказаними або назва сервера, або його IP адреса!" +"В╕тання, установка зак╕нчена. Вийм╕ть з дисковод╕в завантажувальн╕\n" +"нос╕╖ ╕ пот╕м натисн╕ть Return для перевантаження системи.\n" +"\n" +"\n" +"Для ╕нформац╕╖ про виправлен╕ помилки знайден╕ в цмй верс╕╖\n" +"Mandrake Linux зверн╕ться до розд╕лу Errata на сервер╕\n" +"\n" +"\n" +"%s\n" +"\n" +"\n" +"Дов╕дки про конф╕гурац╕ю Вашо╖ системи приведен╕ в пост-установочному\n" +"розд╕л╕ Оф╕ц╕йного Кер╕вництва Користувача Mandrake Linux." #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "Auto-detected" -msgstr "Користуватися автовизначенням" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Workgroup" -msgstr "Робоча група" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Share name" -msgstr "Назва ресурсу" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "SMB server IP" -msgstr "IP адреса SMB сервера" +msgid "paranoid" +msgstr "Парано╕дальний" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "SMB server host" -msgstr "Назва хоста SMB сервера" +msgid "Send mail report after each backup to:" +msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" -" If the desired printer was auto-detected, simply choose it from the list " -"and then add user name, password, and/or workgroup if needed." +"This command you can also use in the \"Printing command\" field of the " +"printing dialogs of many applications. But here do not supply the file name " +"because the file to print is provided by the application.\n" msgstr "" +#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1 +#, c-format +msgid "Resolution" +msgstr "Розд╕льна здатн╕сть" + #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" @@ -11463,96 +10574,49 @@ msgstr "" "також IP адресу принт сервера разом з ╕менем серв╕са та будь-яким\n" "╕менем користувача разом з паролем, та робочою групою." -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "SMB (Windows 9x/NT) Printer Options" -msgstr "Опц╕╖ SMB (Windows 9x/NT) принтера" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Printer \"%s\" on server \"%s\"" -msgstr "Вимикаю мережу" - -#: ../../printer/printerdrake.pm:1 +#: ../../security/help.pm:1 #, c-format -msgid ", printer \"%s\" on server \"%s\"" +msgid "" +"Arguments: (arg)\n" +"\n" +" Accept/Refuse icmp echo." msgstr "" -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Remote printer name missing!" -msgstr "В╕дсутня назва принтера!" - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Remote host name missing!" -msgstr "Нема╓ назви в╕ддаленого хоста!" - -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakgw:1 #, c-format -msgid "Remote printer name" -msgstr "Назва в╕ддаленого принтер" +msgid "reconfigure" +msgstr "перенастро╖ти" -#: ../../printer/printerdrake.pm:1 +#: ../../Xconfig/card.pm:1 #, c-format -msgid "Remote host name" -msgstr "Назва в╕ддаленого хоста" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format msgid "" -"To use a remote lpd printer, you need to supply the hostname of the printer " -"server and the printer name on that server." +"Your card can have 3D hardware acceleration support with XFree %s,\n" +"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" -"Щоб використовувати в╕ддалений lpd принтер, Ви ма╓те вказати назву\n" -"хоста принт-сервера та назву принтера на цьому хост╕." - -#: ../../printer/printerdrake.pm:1 -#, c-format -msgid "Remote lpd Printer Options" -msgstr "Опц╕╖ в╕ддаленого принтера" - -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Manual configuration" -msgstr "Конф╕гурац╕я ╕нтернету" +"Ця в╕деоплата ма╓ п╕дтримку апаратного прискорення трьохвим╕рно╖\n" +"граф╕ки, але т╕льки для XFree %s, В╤ДМ╤ТЬТЕ, ЩО ЦЕ ЕКСПЕРИМЕНТАЛЬНИЙ\n" +"РЕЖИМ, ЯКИЙ МОЖЕ ПРИВЕСТИ ДО ЗАВИСАННЯ ВАШОГО КОМП'ЮТЕРА." -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/logdrake:1 #, fuzzy, c-format -msgid "You must choose/enter a printer/device!" -msgstr "Введ╕ть URI пристрою принтера" +msgid "Xinetd Service" +msgstr "Принтер сервер" -#: ../../printer/printerdrake.pm:1 +#: ../../any.pm:1 #, c-format -msgid "" -" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " -"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." +msgid "access to network tools" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Please choose the port that your printer is connected to." -msgstr "Вибер╕ть до якого посл╕довного порта п╕дключений Ваш модем?" - #: ../../printer/printerdrake.pm:1 #, c-format -msgid "" -"Please choose the port that your printer is connected to or enter a device " -"name/file name in the input line" +msgid "Firmware-Upload for HP LaserJet 1000" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Please choose the printer to which the print jobs should go." -msgstr "Вибер╕ть до якого посл╕довного порта п╕дключений Ваш модем?" - -#: ../../printer/printerdrake.pm:1 +#: ../../share/advertising/03-software.pl:1 #, c-format msgid "" -"Please choose the printer you want to set up. The configuration of the " -"printer will work fully automatically. If your printer was not correctly " -"detected or if you prefer a customized printer configuration, turn on " -"\"Manual configuration\"." +"And, of course, push multimedia to its limits with the very latest software " +"to play videos, audio files and to handle your images or photos." msgstr "" #: ../../printer/printerdrake.pm:1 @@ -11560,539 +10624,698 @@ msgstr "" msgid "Here is a list of all auto-detected printers. " msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "Currently, no alternative possibility is available" +msgid "" +"Error installing aboot, \n" +"try to force installation even if that destroys the first partition?" msgstr "" +"Помилка при встановленн╕ aboot,\n" +"попробувати встановити силою, нав╕ть якщо це розрушить перший п╕дрозд╕л?" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakbackup:1 #, c-format msgid "" -"The configuration of the printer will work fully automatically. If your " -"printer was not correctly detected or if you prefer a customized printer " -"configuration, turn on \"Manual configuration\"." +"Options Description:\n" +"\n" +" In this step Drakbackup allow you to change:\n" +"\n" +" - The compression mode:\n" +" \n" +" If you check bzip2 compression, you will compress\n" +" your data better than gzip (about 2-10 %%).\n" +" This option is not checked by default because\n" +" this compression mode needs more time (about 1000%% more).\n" +" \n" +" - The update mode:\n" +"\n" +" This option will update your backup, but this\n" +" option is not really useful because you need to\n" +" decompress your backup before you can update it.\n" +" \n" +" - the .backupignore mode:\n" +"\n" +" Like with cvs, Drakbackup will ignore all references\n" +" included in .backupignore files in each directories.\n" +" ex: \n" +" #> cat .backupignore\n" +" *.o\n" +" *~\n" +" ...\n" +" \n" +"\n" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "The following printer was auto-detected. " -msgstr "Ц╕ пакети будуть де╕нстальованими" - -#: ../../printer/printerdrake.pm:1 -#, c-format msgid "" -"Please choose the printer to which the print jobs should go or enter a " -"device name/file name in the input line" -msgstr "" +"Restore Selected\n" +"Files" +msgstr "Видалити принтер" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakbackup:1 #, c-format msgid "" -"Please choose the printer you want to set up or enter a device name/file " -"name in the input line" +"%s exists, delete?\n" +"\n" +"Warning: If you've already done this process you'll probably\n" +" need to purge the entry from authorized_keys on the server." msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../network/tools.pm:1 #, c-format -msgid "" -"Alternatively, you can specify a device name/file name in the input line" -msgstr "" +msgid "Please fill or check the field below" +msgstr "Будь-ласка заповн╕ть або вибер╕ть поле внизу" -#: ../../printer/printerdrake.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "" -"If it is not the one you want to configure, enter a device name/file name in " -"the input line" -msgstr "" +msgid "Do you want to save /etc/fstab modifications" +msgstr "Чи ви хочете записати конф╕╜урац╕ю /etc/fstab?" -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Available printers" -msgstr "Локальний принтер" +#: ../../standalone/drakconnect:1 +#, c-format +msgid "Boot Protocol" +msgstr "Протокол завантаження" -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "No printer found!" -msgstr "Локальний принтер" +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "LVM-disks %s\n" +msgstr "Диски LVM %s\n" -#: ../../printer/printerdrake.pm:1 +#: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format -msgid "You must enter a device or file name!" -msgstr "Введ╕ть URI пристрою принтера" +msgid "The package %s is needed. Install it?" +msgstr "Як╕ пакети Ви хочете встановити?" -#: ../../printer/printerdrake.pm:1 +#: ../../services.pm:1 #, c-format -msgid "" -"No local printer found! To manually install a printer enter a device name/" -"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " -"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB " -"printer: /dev/usb/lp1, ...)." -msgstr "" +msgid "On boot" +msgstr "При завантаженн╕" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/harddrake2:1 #, fuzzy, c-format -msgid "Local Printer" -msgstr "Локальний принтер" +msgid "Bus identification" +msgstr "Автентикац╕я" -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "USB printer \\#%s" -msgstr "Нема╓ принтера" +#: ../../diskdrake/hd_gtk.pm:1 +#, c-format +msgid "Please make a backup of your data first" +msgstr "Будь-ласка, створ╕ть спочатку резерну коп╕ю Ваших даних" -#: ../../printer/printerdrake.pm:1 +#: ../../lang.pm:1 #, fuzzy, c-format -msgid "Printer on parallel port \\#%s" -msgstr "Назва хоста принтера" +msgid "Vatican" +msgstr "Латв╕йська" -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Printer \"%s\" on SMB/Windows server \"%s\"" -msgstr "Принтер на сервер╕ SMB/Windows 95/98/NT " +#: ../../install_interactive.pm:1 +#, c-format +msgid "You have more than one hard drive, which one do you install linux on?" +msgstr "У Вас б╕льше одного диску. На який з них ви хочете встановити Л╕накс?" -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Network printer \"%s\", port %s" -msgstr "Принтер в мереж╕ (сокет)" +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "Boot ISO" +msgstr "" -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Detected %s" -msgstr "знайдено %s" +#: ../../lang.pm:1 +#, c-format +msgid "Eritrea" +msgstr "Ер╕треа" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakfont:1 #, fuzzy, c-format -msgid ", printer \"%s\" on SMB/Windows server \"%s\"" -msgstr "Принтер на сервер╕ SMB/Windows 95/98/NT " +msgid "Remove List" +msgstr "Видалити принтер" -#: ../../printer/printerdrake.pm:1 +#: ../../share/advertising/05-desktop.pl:1 #, c-format -msgid ", network printer \"%s\", port %s" +msgid "A customizable environment" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "" -"\n" -"Congratulations, your printer is now installed and configured!\n" -"\n" -"You can print using the \"Print\" command of your application (usually in " -"the \"File\" menu).\n" -"\n" -"If you want to add, remove, or rename a printer, or if you want to change " -"the default option settings (paper input tray, printout quality, ...), " -"select \"Printer\" in the \"Hardware\" section of the Mandrake Control " -"Center." +msgid "Inuktitut" msgstr "" +#: ../../lang.pm:1 +#, c-format +msgid "Morocco" +msgstr "Мароко" + #: ../../printer/printerdrake.pm:1 #, c-format -msgid "Auto-detect printers connected to machines running Microsoft Windows" -msgstr "" +msgid "Which printer model do you have?" +msgstr "Яку модель принтера Ви ма╓те" #: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Add a new printer" +msgstr "Додати принтер" + +#: ../../standalone/drakbackup:1 #, c-format -msgid "Auto-detect printers connected directly to the local network" +msgid " All of your selected data have been " msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakTermServ:1 #, fuzzy, c-format -msgid "Auto-detect printers connected to this machine" -msgstr "В╕ддалений принтер" +msgid "<-- Delete" +msgstr "Стерти" -#: ../../printer/printerdrake.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "" -"\n" -"Welcome to the Printer Setup Wizard\n" -"\n" -"This wizard will help you to install your printer(s) connected to this " -"computer.\n" -"\n" -"If you have printer(s) connected to this machine, Please plug it/them in on " -"this computer and turn it/them on so that it/they can be auto-detected.\n" -"\n" -" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " -"to set up your printer(s) now." +msgid "Nepal" +msgstr "Непал" + +#: ../../harddrake/data.pm:1 +#, c-format +msgid "cpu # " msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "" -"\n" -"Welcome to the Printer Setup Wizard\n" -"\n" -"This wizard will help you to install your printer(s) connected to this " -"computer or connected directly to the network.\n" -"\n" -"If you have printer(s) connected to this machine, Please plug it/them in on " -"this computer and turn it/them on so that it/they can be auto-detected. Also " -"your network printer(s) must be connected and turned on.\n" -"\n" -"Note that auto-detecting printers on the network takes longer than the auto-" -"detection of only the printers connected to this machine. So turn off the " -"auto-detection of network printers when you don't need it.\n" -"\n" -" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " -"to set up your printer(s) now." +msgid "chunk size" +msgstr "розм╕р д╕лянки" + +# NOTE: this message will be displayed by grub at boot time; that is +# using the BIOS font; that means cp437 charset on 99.99% of PC computers +# out there. It is then suggested that for non latin languages an ascii +# transliteration be used; or maybe the english text be used; as it is best +# +# The lines must fit on screen, aka length < 80 +# and only one line per string for the GRUB messages +# +#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) +#. -PO: and keep them smaller than 79 chars long +#: ../../bootloader.pm:1 +#, c-format +msgid "commands before booting, or 'c' for a command-line." msgstr "" +"komandy pered zavantazhennjam, ta 'c' dlja perehodu v komandnyj rezhim." + +#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 +#, c-format +msgid "Problems installing package %s" +msgstr "Помилки при установц╕ пакету %s" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/logdrake:1 #, c-format -msgid "" -"\n" -"Welcome to the Printer Setup Wizard\n" -"\n" -"This wizard will help you to install your printer(s) connected to this " -"computer, connected directly to the network or to a remote Windows machine.\n" -"\n" -"If you have printer(s) connected to this machine, Please plug it/them in on " -"this computer and turn it/them on so that it/they can be auto-detected. Also " -"your network printer(s) and your Windows machines must be connected and " -"turned on.\n" -"\n" -"Note that auto-detecting printers on the network takes longer than the auto-" -"detection of only the printers connected to this machine. So turn off the " -"auto-detection of network and/or Windows-hosted printers when you don't need " -"it.\n" -"\n" -" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " -"to set up your printer(s) now." +msgid "You will receive an alert if the load is higher than this value" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakbug:1 #, c-format msgid "" "\n" -"Welcome to the Printer Setup Wizard\n" "\n" -"This wizard allows you to install local or remote printers to be used from " -"this machine and also from other machines in the network.\n" +"To submit a bug report, click on the button report.\n" +"This will open a web browser window on https://drakbug.mandrakesoft.com\n" +" where you'll find a form to fill in.The information displayed above will " +"be \n" +"transferred to that server\n" "\n" -"It asks you for all necessary information to set up the printer and gives " -"you access to all available printer drivers, driver options, and printer " -"connection types." msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/scannerdrake:1 #, c-format -msgid "" -"\n" -"\n" -"Printerdrake could not determine which model your printer %s is. Please " -"choose the correct model from the list." +msgid "Add a scanner manually" msgstr "" -#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 +#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format -msgid ")" +msgid "Reload partition table" +msgstr "Прочитати таблицю п╕дрозд╕л╕в" + +#: ../../standalone/drakboot:1 +#, c-format +msgid "Yes, I want autologin with this (user, desktop)" msgstr "" +"Так, я хочу автоматично ре╓струватися в систем╕ з цим (╕менем, середовищем)" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakfont:1 #, c-format -msgid " on " +msgid "Search for fonts in installed list" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakgw:1 #, c-format -msgid "(" +msgid "The Local Network did not finish with `.0', bailing out." msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../install_steps_interactive.pm:1 #, fuzzy, c-format -msgid "Configuring printer ..." -msgstr "Настроюю принтер \"%s\"..." +msgid "Boot" +msgstr "Root" -#: ../../printer/printerdrake.pm:1 +#: ../../harddrake/v4l.pm:1 #, fuzzy, c-format -msgid "Searching for new printers..." -msgstr "Локальний принтер" +msgid "Tuner type:" +msgstr "Зм╕нити тип" -#: ../../printer/printerdrake.pm:1 +#: ../../help.pm:1 #, c-format msgid "" -"NOTE: Depending on the printer model and the printing system up to %d MB of " -"additional software will be installed." +"Now, it's time to select a printing system for your computer. Other OSs may\n" +"offer you one, but Mandrake Linux offers two. Each of the printing system\n" +"is best suited to particular types of configuration.\n" +"\n" +" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n" +"if you have a direct connection to your printer, you want to be able to\n" +"panic out of printer jams, and you do not have networked printers. (\"%s\"\n" +"will handle only very simple network cases and is somewhat slow when used\n" +"with networks.) It's recommended that you use \"pdq\" if this is your first\n" +"experience with GNU/Linux.\n" +"\n" +" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n" +"printing to your local printer or to one halfway around the planet. It is\n" +"simple to configure and can act as a server or a client for the ancient\n" +"\"lpd \" printing system, so it compatible with older operating systems\n" +"which may still need print services. While quite powerful, the basic setup\n" +"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n" +"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n" +"front-ends for printing or choosing printer options and for managing the\n" +"printer.\n" +"\n" +"If you make a choice now, and later find that you don't like your printing\n" +"system you may change it by running PrinterDrake from the Mandrake Control\n" +"Center and clicking the expert button." msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Are you sure that you want to set up printing on this machine?\n" +msgid "\"Menu\" key" msgstr "" #: ../../printer/printerdrake.pm:1 +#, c-format +msgid "" +"\n" +"\n" +"Please check whether Printerdrake did the auto-detection of your printer " +"model correctly. Find the correct model in the list when a wrong model or " +"\"Raw printer\" is highlighted." +msgstr "" + +#: ../../standalone/draksec:1 #, fuzzy, c-format -msgid "Do you want to enable printing on the printers mentioned above?\n" -msgstr "Чи Ви хочете в╕дкривати з'╓днання при завантаженн╕ системи?" +msgid "Security Administrator:" +msgstr "Опц╕╖ в╕ддаленого принтера" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "Do you want to enable printing on printers in the local network?\n" +msgid "Please enter your login" +msgstr "Будь-ласка, спробуйте ще раз" + +#: ../../security/help.pm:1 +#, c-format +msgid "if set to yes, check permissions of files in the users' home." msgstr "" -"Встановити принтер \"%s\"\n" -"як стандартний?" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakconnect:1 #, c-format msgid "" -"Do you want to enable printing on the printers mentioned above or on " -"printers in the local network?\n" +"You don't have an Internet connection.\n" +"Create one first by clicking on 'Configure'" msgstr "" +"Ви не ма╓те жодного з'╓днання з ╕нтернетом.\n" +"Створ╕ть таке з'╓днання клацнувши на \"Настро╖ти\"" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakfont:1 #, fuzzy, c-format -msgid " (Make sure that all your printers are connected and turned on).\n" -msgstr "Вибер╕ть до якого посл╕довного порта п╕дключений Ваш модем?" +msgid "Fonts copy" +msgstr "Форматувати дискету" -#: ../../printer/printerdrake.pm:1 +#: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format -msgid "" -"There are no printers found which are directly connected to your machine" -msgstr "" +msgid "Automated" +msgstr "Автоматизована" + +#: ../../Xconfig/test.pm:1 +#, c-format +msgid "Do you want to test the configuration?" +msgstr "Чи ви хочете випробувати нову конф╕╜урац╕ю?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" -"\n" -"There are %d unknown printers directly connected to your system" +"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/" +"GIMP." msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/draksec:1 #, c-format msgid "" +"Standard: This is the standard security recommended for a computer that will " +"be used to connect\n" +" to the Internet as a client.\n" "\n" -"There is one unknown printer directly connected to your system" +"High: There are already some restrictions, and more automatic checks " +"are run every night.\n" +"\n" +"Higher: The security is now high enough to use the system as a server " +"which can accept\n" +" connections from many clients. If your machine is only a " +"client on the Internet, you\n" +" should choose a lower level.\n" +"\n" +"Paranoid: This is similar to the previous level, but the system is entirely " +"closed and security\n" +" features are at their maximum\n" +"\n" +"Security Administrator:\n" +" If the 'Security Alerts' option is set, security alerts will " +"be sent to this user (username or\n" +" email)" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../help.pm:1 ../../install_steps_interactive.pm:1 +#, c-format +msgid "Save packages selection" +msgstr "Зберегти виб╕р пакет╕в" + +#: ../../standalone/drakautoinst:1 #, fuzzy, c-format -msgid "" -"The following printer\n" -"\n" -"%s%s\n" -"is directly connected to your system" -msgstr "У Ваш╕й систем╕ нема╓ адаптера мереж╕!" +msgid "Remove the last item" +msgstr "Стертифайлу зворотнього монтування?" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "User list to restore (only the most recent date per user is important)" +msgstr "" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "No net boot images created!" +msgstr "" + +#: ../../network/adsl.pm:1 +#, c-format +msgid "use pptp" +msgstr "вживати pptp" + +#: ../../services.pm:1 +#, c-format +msgid "Choose which services should be automatically started at boot time" +msgstr "" +"Вибер╕ть, як╕ серв╕си мають стартувати автоматично при завантаженн╕ системи" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "" -"The following printer\n" -"\n" -"%s%s\n" -"are directly connected to your system" -msgstr "У Ваш╕й систем╕ нема╓ адаптера мереж╕!" +msgid "Learn how to use this printer" +msgstr "Чи ви хочете випробувати нову конф╕╜урац╕ю?" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format +msgid "Configure the network now" +msgstr "Настро╖ти мережу" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Choose a mirror from which to get the packages" +msgstr "Вибер╕ть сервер, з якого звантажити пакети" + +#: ../../install_interactive.pm:1 +#, c-format msgid "" -"The following printers\n" -"\n" -"%s%s\n" -"are directly connected to your system" -msgstr "У Ваш╕й систем╕ нема╓ адаптера мереж╕!" +"The FAT resizer is unable to handle your partition, \n" +"the following error occured: %s" +msgstr "" +"Програма зм╕ни розм╕ру п╕дрозд╕лу FAT не може працювати з Вашим\n" +"п╕дрозд╕лом, при робот╕ сталася така помилка: %s" -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "and %d unknown printers" -msgstr "Додати принтер" +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Which sector do you want to move it to?" +msgstr "На який сектор перем╕ститися?" -#: ../../printer/printerdrake.pm:1 +#: ../../interactive/stdio.pm:1 #, fuzzy, c-format -msgid "and one unknown printer" -msgstr "Додати принтер" +msgid "Do you want to click on this button?" +msgstr "Чи Ви хочете використовувати aboot?" + +#: ../../lang.pm:1 +#, c-format +msgid "Bahamas" +msgstr "Багами" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "Checking your system..." -msgstr "Яку систему друку Ви хочете використовувати?" +msgid "Manual configuration" +msgstr "Конф╕гурац╕я ╕нтернету" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/logdrake:1 #, c-format -msgid "Restarting CUPS..." -msgstr "" +msgid "search" +msgstr "пошук" -#: ../../printer/printerdrake.pm:1 +#: ../../services.pm:1 #, c-format -msgid "This server is already in the list, it cannot be added again.\n" +msgid "" +"This package loads the selected keyboard map as set in\n" +"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" +"You should leave this enabled for most machines." msgstr "" +"Цей пакет завантажу╓ вибрану розкладку клав╕атури, яка встановлю╓ться\n" +"в /etc/sysconfig/keyboard. Ця клав╕атура може бути вибрана за\n" +"допомогою програми kbdconfig. Краще залишити цей пакет працюючим на\n" +"б╕льшост╕ систем." -#: ../../printer/printerdrake.pm:1 +#: ../../Xconfig/card.pm:1 #, c-format -msgid "Examples for correct IPs:\n" +msgid "Xpmac (installation display driver)" +msgstr "Xpmac (драйвер дисплея для установки)" + +#: ../../network/ethernet.pm:1 ../../network/network.pm:1 +#, c-format +msgid "Zeroconf host name must not contain a ." msgstr "" -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "The entered IP is not correct.\n" -msgstr "Все в╕рно?" +#: ../../services.pm:1 +#, c-format +msgid "" +"Syslog is the facility by which many daemons use to log messages\n" +"to various system log files. It is a good idea to always run syslog." +msgstr "" +"syslog - це серв╕с в систем╕, за допомогою якого демони записують\n" +"системн╕ пов╕домлення у р╕зн╕ системн╕ файли ре╓страц╕╖ пов╕домлень. В\n" +"будь-як╕й систем╕ непогано мати syslog." -#: ../../printer/printerdrake.pm:1 +#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1 #, fuzzy, c-format -msgid "Server IP missing!" -msgstr "Нема╓ назви сервера NCP!" +msgid "Unknown/Others" +msgstr "Загальне" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakxtv:1 #, c-format -msgid "If no port is given, 631 will be taken as default." +msgid "No TV Card detected!" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1 +#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 +#: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format -msgid "Enter IP address and port of the host whose printers you want to use." -msgstr "" +msgid "Options" +msgstr "Параметри" #: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Accessing printers on remote CUPS servers" -msgstr "Принтер на в╕ддаленому сервер╕ CUPS" +#, c-format +msgid "The printer \"%s\" is set as the default printer now." +msgstr "Принтер \"%s\" встановлено основним" #: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Remove selected server" -msgstr "Видалити принтер" +#, c-format +msgid "" +"You are configuring an OKI laser winprinter. These printers\n" +"use a very special communication protocol and therefore they work only when " +"connected to the first parallel port. When your printer is connected to " +"another port or to a print server box please connect the printer to the " +"first parallel port before you print a test page. Otherwise the printer will " +"not work. Your connection type setting will be ignored by the driver." +msgstr "" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "generation of the cpu (eg: 8 for PentiumIII, ...)" +msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "Edit selected server" -msgstr "знайдено %s" +msgid "Auto-detected" +msgstr "Користуватися автовизначенням" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakpxe:1 #, fuzzy, c-format -msgid "Add server" -msgstr "Додати користувача" +msgid "" +"You are about to configure your computer to install a PXE server as a DHCP " +"server\n" +"and a TFTP server to build an installation server.\n" +"With that feature, other computers on your local network will be installable " +"using this computer as source.\n" +"\n" +"Make sure you have configured your Network/Internet access using drakconnect " +"before going any further.\n" +"\n" +"Note: you need a dedicated Network Adapter to set up a Local Area Network " +"(LAN)." +msgstr "" +"Тепер п╕сля того, як параметри Вашого з'╓днання з ╤нтернетом\n" +"встановлен╕, Ви можете скоф╕╜урувати св╕й комп'ютер таким чином, щоб\n" +"в╕н дозволяв сп╕льне використання свого з'╓днання до\n" +"╤нтернету. \n" +"\n" +"Прим╕тка: Вам для цього потр╕бно мати плату мереж╕, щоб настро╖ти\n" +"локальну мережу (LAN)." -#: ../../printer/printerdrake.pm:1 +#: ../../install_steps_interactive.pm:1 #, c-format msgid "" -"Add here the CUPS servers whose printers you want to use. You only need to " -"do this if the servers do not broadcast their printer information into the " -"local network." +"No free space for 1MB bootstrap! Install will continue, but to boot your " +"system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" +"Не вистача╓ в╕льного м╕сця для 1МБ завантажувального блоку! Установка\n" +"буде продовжуватись, але для завантаження сво╓╖ системи Вам потр╕бно\n" +"буде створити DiskDrake'ом завантажувальний п╕дрозд╕л " #: ../../printer/printerdrake.pm:1 #, c-format -msgid "IP address of host/network:" +msgid "" +"Please choose the printer you want to set up or enter a device name/file " +"name in the input line" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format -msgid "This host/network is already in the list, it cannot be added again.\n" -msgstr "" +msgid "Refuse" +msgstr "В╕дкинути" -#: ../../printer/printerdrake.pm:1 +#: ../../diskdrake/hd_gtk.pm:1 #, c-format -msgid "The entered host/network IP is not correct.\n" +msgid "HFS" +msgstr "HFS" + +#: ../../services.pm:1 +#, c-format +msgid "" +"HardDrake runs a hardware probe, and optionally configures\n" +"new/changed hardware." msgstr "" +"HardDrake викону╓ тестування апаратного забезпечення ╕ якщо потр╕бно\n" +"конф╕╜уру╓ нове або зм╕нене апаратне забезпечення." -#: ../../printer/printerdrake.pm:1 +#: ../../printer/cups.pm:1 ../../printer/main.pm:1 +#, fuzzy, c-format +msgid "Remote Printers" +msgstr "В╕ддалений принтер" + +#: ../../fs.pm:1 #, c-format -msgid "Host/network IP address missing." +msgid "Creating and formatting file %s" +msgstr "Створюю та форматую файл %s" + +#: ../../security/help.pm:1 +#, c-format +msgid "if set to yes, check additions/removals of sgid files." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" -"Choose the network or host on which the local printers should be made " -"available:" +"The HP LaserJet 1000 needs its firmware to be uploaded after being turned " +"on. Download the Windows driver package from the HP web site (the firmware " +"on the printer's CD does not work) and extract the firmware file from it by " +"uncompresing the self-extracting '.exe' file with the 'unzip' utility and " +"searching for the 'sihp1000.img' file. Copy this file into the '/etc/" +"printer' directory. There it will be found by the automatic uploader script " +"and uploaded whenever the printer is connected and turned on.\n" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Sharing of local printers" -msgstr "Локальний принтер" +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Choose an existing LVM to add to" +msgstr "Вибер╕ть ╕снуючий LVM, до якого додати" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakfont:1 #, fuzzy, c-format -msgid "Remove selected host/network" -msgstr "Видалити принтер" +msgid "xfs restart" +msgstr "обмежити" #: ../../printer/printerdrake.pm:1 #, c-format -msgid "Edit selected host/network" +msgid "" +"The printer \"%s\" already exists,\n" +"do you really want to overwrite its configuration?" msgstr "" +"Принтер з назвою \"%s\" вже ╕сну╓.\n" +"Ви д╕йсно бажа╓те переписати його конф╕╜урац╕ю?" -#: ../../printer/printerdrake.pm:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "Add host/network" -msgstr "" +msgid "No partition available" +msgstr "нема╓ п╕дрозд╕л╕в" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/scannerdrake:1 #, c-format -msgid "" -"These are the machines and networks on which the locally connected printer" -"(s) should be available:" +msgid "Use the scanners on hosts: " msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakfont:1 #, c-format -msgid "" -"When this option is turned on, on every startup of CUPS it is automatically " -"made sure that\n" -"\n" -"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n" -"\n" -"- if /etc/cups/cupsd.conf is missing, it will be created\n" -"\n" -"- when printer information is broadcasted, it does not contain \"localhost\" " -"as the server name.\n" -"\n" -"If some of these measures lead to problems for you, turn this option off, " -"but then you have to take care of these points." +msgid "Unselected All" msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/logdrake:1 #, fuzzy, c-format -msgid "Automatic correction of CUPS configuration" -msgstr "Автоматична конф╕╜урац╕я CUPS" +msgid "Domain Name Resolver" +msgstr "Назва домену" -#: ../../printer/printerdrake.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "" -"Turning on this allows to print plain text files in japanese language. Only " -"use this function if you really want to print text in japanese, if it is " -"activated you cannot print accentuated characters in latin fonts any more " -"and you will not be able to adjust the margins, the character size, etc. " -"This setting only affects printers defined on this machine. If you want to " -"print japanese text on a printer set up on a remote machine, you have to " -"activate this function on that remote machine." +msgid "Encryption key (again)" msgstr "" #: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Japanese text printing mode" -msgstr "Настро╖ти мережу" +#, c-format +msgid "Samba share name missing!" +msgstr "Нема╓ назви ресурсу samba!" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakfont:1 #, c-format -msgid "" -"To get access to printers on remote CUPS servers in your local network you " -"only need to turn on the \"Automatically find available printers on remote " -"machines\" option; the CUPS servers inform your machine automatically about " -"their printers. All printers currently known to your machine are listed in " -"the \"Remote printers\" section in the main window of Printerdrake. If your " -"CUPS server(s) is/are not in your local network, you have to enter the IP " -"address(es) and optionally the port number(s) here to get the printer " -"information from the server(s)." +msgid "True Type install done" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "Detection in progress" +msgstr "знайдено на порту %s" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "Build Whole Kernel -->" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "None" -msgstr "Зак╕нчено" +#: ../../install_steps.pm:1 +#, c-format +msgid "Welcome to %s" +msgstr "Ласкаво просимо до %s" -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format -msgid "Additional CUPS servers: " -msgstr "IP адреса CUPS сервера" +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Please insert the Update Modules floppy in drive %s" +msgstr "Вставте дискету Поновлення Модул╕в в дисков╕д %s" -#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "No remote machines" -msgstr "(на ц╕й машин╕)" +#: ../../standalone/drakboot:1 +#, c-format +msgid "Bootsplash" +msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "Custom configuration" -msgstr "Конф╕гурац╕я ╕нтернету" +msgid "" +"The following printer\n" +"\n" +"%s%s\n" +"is directly connected to your system" +msgstr "У Ваш╕й систем╕ нема╓ адаптера мереж╕!" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format @@ -12101,1198 +11324,1292 @@ msgstr " #: ../../printer/printerdrake.pm:1 #, c-format -msgid "Automatically find available printers on remote machines" +msgid "" +"\n" +"The \"%s\" command also allows to modify the option settings for a " +"particular printing job. Simply add the desired settings to the command " +"line, e. g. \"%s \". " msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../modules/interactive.pm:1 #, c-format -msgid "The printers on this machine are available to other computers" +msgid "" +"In some cases, the %s driver needs to have extra information to work\n" +"properly, although it normally works fine without them. Would you like to " +"specify\n" +"extra options for it or allow the driver to probe your machine for the\n" +"information it needs? Occasionally, probing will hang a computer, but it " +"should\n" +"not cause any damage." msgstr "" +"В деяких випадках драйвер %s вимага╓ додатково╖ ╕нформац╕╖ для того,\n" +"щоб в╕рно працювати, хоча звичайно працю╓ нормально без не╖. Чи не\n" +"хот╕ли б ви вказати додатков╕ опц╕╖ для нього чи дозволити драйверу\n" +"випробувати Вашу систему, щоб знайти потр╕бну ╕нформац╕ю? ╤нколи таке\n" +"випробовування може привести до зависання комп'ютера, але не повинно\n" +"н╕як зашкодити йому." -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "" -"You can also decide here whether printers on remote machines should be " -"automatically made available on this machine." +msgid "Not the correct CD label. Disk is labelled %s." msgstr "" -#: ../../printer/printerdrake.pm:1 +#: ../../standalone/drakgw:1 #, c-format msgid "" -"Here you can choose whether the printers connected to this machine should be " -"accessable by remote machines and by which remote machines." +"Welcome to the Internet Connection Sharing utility!\n" +"\n" +"%s\n" +"\n" +"Click on Configure to launch the setup wizard." msgstr "" +"Ласкаво просимо до програми конф╕╜урац╕╖ сп╕льного користування\n" +"з'╓днання з ╕нтернетом\n" +"\n" +"%s\n" +"\n" +"Клацн╕ть на \"Настро╖ти\" щоб запустити конф╕╜уратор." + +#: ../../lang.pm:1 +#, c-format +msgid "Cuba" +msgstr "Куба" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "CUPS printer configuration" -msgstr "Зм╕нити конф╕гурац╕ю принтера" +msgid "Searching for new printers..." +msgstr "Локальний принтер" -#: ../../printer/printerdrake.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)" +msgid "Belize" +msgstr "Бел╕з" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid " (multi-session)" msgstr "" -#: ../../printer/printerdrake.pm:1 -#, fuzzy, c-format +#: ../../any.pm:1 +#, c-format +msgid "Kernel Boot Timeout" +msgstr "Затримка при завантаженн╕ ядра" + +#: ../../Xconfig/card.pm:1 +#, c-format msgid "" -"\n" -"Printers on remote CUPS servers do not need to be configured here; these " -"printers will be automatically detected." +"Your card can have 3D hardware acceleration support but only with XFree %s.\n" +"Your card is supported by XFree %s which may have a better support in 2D." msgstr "" -"\n" -"Для в╕ддаленого сервера CUPS Вам не потр╕бно конф╕╜урувати принтер╕в,\n" -"вс╕ принтери будуть автоматично визначен╕. Якщо Ви сумн╕ва╓тесь,\n" -"вибер╕ть \"В╕ддалений сервер CUPS\"." +"Ваша в╕деоплата може користуватися апаратним прискоренням\n" +"трьохвим╕рно╖ граф╕ки але т╕льки з сервером XFree %s. Ваша в╕деоплата\n" +"п╕дтриму╓ться сервером XFree %s, у якому ви можливо матимете кращий\n" +"супров╕д для двохвим╕рно╖ граф╕ки." -#: ../../printer/printerdrake.pm:1 +#: ../../install_interactive.pm:1 #, c-format -msgid "How is the printer connected?" -msgstr "Як принтер з'╓днаний" +msgid "The DrakX Partitioning wizard found the following solutions:" +msgstr "Пом╕чник розбивки на п╕дрозд╕ли DrakX знайшов так╕ можлив╕ р╕шення:" -#: ../../printer/printerdrake.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Select Printer Connection" -msgstr "Вибер╕ть з'╓днання принтера" +msgid "Hungarian" +msgstr "Угорська" -#: ../../printer/printerdrake.pm:1 +#: ../../network/isdn.pm:1 #, c-format msgid "" -"The HP LaserJet 1000 needs its firmware to be uploaded after being turned " -"on. Download the Windows driver package from the HP web site (the firmware " -"on the printer's CD does not work) and extract the firmware file from it by " -"uncompresing the self-extracting '.exe' file with the 'unzip' utility and " -"searching for the 'sihp1000.img' file. Copy this file into the '/etc/" -"printer' directory. There it will be found by the automatic uploader script " -"and uploaded whenever the printer is connected and turned on.\n" +"Select your provider.\n" +"If it isn't listed, choose Unlisted." msgstr "" +"Вибер╕ть свого провайдера.\n" +"Якщо його нема╓ в списку, вибер╕ть ╤нший" -#: ../../security/help.pm:1 +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Automatic time synchronization (using NTP)" +msgstr "Автоматична синхрон╕зац╕я часу (╕з застосуванням NTP)" + +#: ../../Xconfig/card.pm:1 +#, c-format +msgid "8 MB" +msgstr "8 Мб" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "LDAP Server" +msgstr "Сервер LDAP" + +#: ../../services.pm:1 #, c-format msgid "" -"Arguments: (umask)\n" -"\n" -"Set the user umask." +"PCMCIA support is usually to support things like ethernet and\n" +"modems in laptops. It won't get started unless configured so it is safe to " +"have\n" +"it installed on machines that don't need it." msgstr "" +"PCMCIA п╕дтримка потр╕бна в основному для забезпечення роботи таких\n" +"речей, як ethernet та модем в переносних комп'ютерах. Пакет не почне\n" +"працювати, якщо його не сконф╕╜уровано. Отже, його безпечно\n" +"встановлювати на комп'ютерах, нав╕ть якщо в╕н не буде\n" +"використовуватися." -#: ../../security/help.pm:1 +#: ../../network/tools.pm:1 +#, c-format +msgid "Choose your country" +msgstr "Вибер╕ть кра╖ну" + +#: ../../standalone/drakbackup:1 #, c-format msgid "" -"Arguments: (val)\n" "\n" -"Set the shell timeout. A value of zero means no timeout." +"- System Files:\n" msgstr "" -#: ../../security/help.pm:1 +#: ../../standalone/drakbug:1 +#, fuzzy, c-format +msgid "Standalone Tools" +msgstr "Засоби для консол╕" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Where" +msgstr "Кол╕щатко" + +#: ../../standalone/logdrake:1 +#, c-format +msgid "but not matching" +msgstr "але не в╕дпов╕да╓" + +#: ../../harddrake/sound.pm:1 #, c-format msgid "" -"Arguments: (size)\n" -"\n" -"Set shell commands history size. A value of -1 means unlimited." +"Here you can select an alternative driver (either OSS or ALSA) for your " +"sound card (%s)." msgstr "" -#: ../../security/help.pm:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "if set to yes, check additions/removals of sgid files." -msgstr "" +msgid "Configuring PCMCIA cards..." +msgstr "Конф╕гурую картки PCMCIA..." -#: ../../security/help.pm:1 +#: ../../common.pm:1 #, c-format -msgid "if set to yes, check open ports." +msgid "kdesu missing" +msgstr "нема╓ kdesu" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Encryption key" msgstr "" -#: ../../security/help.pm:1 +#: ../../mouse.pm:1 #, c-format -msgid "" -"if set, send the mail report to this email address else send it to root." +msgid "Microsoft IntelliMouse" +msgstr "Microsoft IntelliMouse" + +#: ../../lang.pm:1 +#, c-format +msgid "Christmas Island" +msgstr "Р╕здва остр╕в" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Installation of bootloader failed. The following error occured:" +msgstr "Установка завантажувача неусп╕шна. Сталася помилка:" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "EIDE/SCSI channel" msgstr "" -#: ../../security/help.pm:1 +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Set this printer as the default" +msgstr "Встановити як основний принтер" + +#: ../../install_interactive.pm:1 +#, c-format +msgid "partition %s" +msgstr "п╕дрозд╕л %s" + +#: ../../security/level.pm:1 +#, c-format +msgid "Paranoid" +msgstr "Парано╕дальний" + +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "if set to yes, report check result by mail." -msgstr "" +msgid "NIS" +msgstr "NIS" -#: ../../security/help.pm:1 +#: ../../standalone/drakTermServ:1 #, c-format -msgid "if set to yes, check files/directories writable by everybody." +msgid "<-- Del User" msgstr "" -#: ../../security/help.pm:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "if set to yes, reports check result to tty." +msgid "Location on the bus" msgstr "" -#: ../../security/help.pm:1 +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "No printer found!" +msgstr "Локальний принтер" + +#: ../../standalone/harddrake2:1 #, c-format -msgid "if set to yes, run some checks against the rpm database." +msgid "the vendor name of the device" msgstr "" -#: ../../security/help.pm:1 +#: ../../help.pm:1 ../../install_interactive.pm:1 #, c-format -msgid "if set to yes, check if the network devices are in promiscuous mode." -msgstr "" +msgid "Erase entire disk" +msgstr "Стерти весь диск" -#: ../../security/help.pm:1 +#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1 #, c-format -msgid "if set to yes, run chkrootkit checks." -msgstr "" +msgid " (Default)" +msgstr " (Основна)" #: ../../security/help.pm:1 #, c-format -msgid "if set to yes, check permissions of files in the users' home." +msgid "" +"Arguments: ()\n" +"\n" +"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n" +"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/" +"server\n" +"to point to /etc/security/msec/server.. The /etc/security/msec/" +"server\n" +"is used by chkconfig --add to decide to add a service if it is present in " +"the file\n" +"during the installation of packages." msgstr "" -#: ../../security/help.pm:1 +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "Automatic reconfiguration" +msgstr "Автоматична конф╕╜урац╕я CUPS" + +#: ../../standalone/net_monitor:1 #, c-format -msgid "if set to yes, check additions/removals of suid root files." +msgid "Receiving Speed:" msgstr "" -#: ../../security/help.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "if set to yes, report check result to syslog." -msgstr "" +msgid "Turks and Caicos Islands" +msgstr "Острови Туркс ╕ Кайкос" -#: ../../security/help.pm:1 +#: ../../standalone/drakperm:1 +#, fuzzy, c-format +msgid "permissions" +msgstr "п╕дрозд╕л %s" + +#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1 +#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "" -"if set to yes, check for empty passwords, for no password in /etc/shadow and " -"for users with the 0 id other than root." -msgstr "" +msgid "<- Previous" +msgstr "<- Попередн╕й" -#: ../../security/help.pm:1 +#: ../../standalone/drakgw:1 #, c-format -msgid "if set to yes, run the daily security checks." -msgstr "" +msgid "Internet Connection Sharing configuration" +msgstr "Конф╕гурац╕я сп╕льного З'╓днання з ╕нтернетом." -#: ../../security/help.pm:1 +#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 #, c-format -msgid "if set to yes, verify checksum of the suid/sgid files." -msgstr "" +msgid "Toggle between flat and group sorted" +msgstr "Перемикнути м╕ж показом по групам ╕ звичайним списком" -#: ../../security/help.pm:1 +#: ../../standalone/drakboot:1 #, c-format -msgid "if set to yes, check empty password in /etc/shadow." -msgstr "" +msgid "Themes" +msgstr "Теми" -#: ../../security/help.pm:1 +#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #, c-format -msgid "if set to yes, report unowned files." -msgstr "" +msgid "Options: %s" +msgstr "Параметри: %s" -#: ../../security/help.pm:1 +#: ../../standalone/drakboot:1 #, c-format msgid "" -"Arguments: (umask)\n" -"\n" -"Set the root umask." +"You are currently using %s as your boot manager.\n" +"Click on Configure to launch the setup wizard." msgstr "" +"ви користу╓тесь завантажувачем систем %s.\n" +"Клацн╕ть на \"Настро╖ти\" щоб стартувати пом╕чник установки." -#: ../../security/help.pm:1 +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "OKI winprinter configuration" +msgstr "Зм╕нити конф╕гурац╕ю принтера" + +#: ../../lang.pm:1 #, c-format -msgid "" -"Arguments: (length, ndigits=0, nupper=0)\n" -"\n" -"Set the password minimum length and minimum number of digit and minimum " -"number of capitalized letters." -msgstr "" +msgid "Saint Helena" +msgstr "Свята Елена" -#: ../../security/help.pm:1 +#: ../../help.pm:1 ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Security Level" +msgstr "Встановлення р╕вня безпеки" + +#: ../../install_steps_interactive.pm:1 #, c-format msgid "" -"Arguments: (arg)\n" +"Some steps are not completed.\n" "\n" -"Set the password history length to prevent password reuse." +"Do you really want to quit now?" msgstr "" +"Деяк╕ кроки не завершен╕.\n" +"\n" +"Ви д╕йсно хочете припинити зараз?" -#: ../../security/help.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "" -"Arguments: (max, inactive=-1)\n" -"\n" -"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive" -"\\fP." -msgstr "" +msgid "Sudan" +msgstr "Судан" -#: ../../security/help.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "" -"Arguments: (name)\n" -"\n" -"Add the name as an exception to the handling of password aging by msec." -msgstr "" +msgid "Polish (qwertz layout)" +msgstr "Польська (розкладка qwertz)" -#: ../../security/help.pm:1 +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Syria" +msgstr "Сур╕нам" + +# NOTE: this message will be displayed at boot time; that is +# only the ascii charset will be available on most machines +# so use only 7bit for this message (and do transliteration or +# leave it in English, as it is the best for your language) +# +#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) +#: ../../bootloader.pm:1 #, c-format msgid "" -"Arguments: (arg)\n" +"Welcome to %s the operating system chooser!\n" +"\n" +"Choose an operating system from the list above or\n" +"wait %d seconds for default boot.\n" "\n" -" Enable/Disable sulogin(8) in single user level." msgstr "" +"Laskavo prosymo do %s - peremykacha operaciynih system!\n" +"\n" +"Vyberit' odnu z operaciynikh system v spysku abo pochekajte %d sekund\n" +"poki pochne vantazhytysja persha z inh.\n" +"\n" -#: ../../security/help.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "" -"Arguments: (arg)\n" -"\n" -" Activate/Disable daily security check." -msgstr "" +msgid "Portuguese" +msgstr "Португальська" -#: ../../security/help.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "" -"Arguments: (arg)\n" -"\n" -"Activate/Disable ethernet cards promiscuity check." -msgstr "" +msgid "Loopback file name: " +msgstr "Назва файлу зворотнього монтування: " -#: ../../security/help.pm:1 +#: ../../network/network.pm:1 +#, fuzzy, c-format +msgid "DNS server address should be in format 1.2.3.4" +msgstr "IP адреса ма╓ бути у формат╕ 1.2.3.4" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Serbia" +msgstr "посл╕довний" + +#: ../../standalone/drakxtv:1 #, c-format -msgid "" -"Arguments: (arg)\n" -"\n" -"Use password to authenticate users." +msgid "Newzealand" msgstr "" -#: ../../security/help.pm:1 +#: ../../fsedit.pm:1 #, c-format -msgid "" -"Arguments: (arg)\n" -"\n" -" Enabling su only from members of the wheel group or allow su from any user." -msgstr "" +msgid "This directory should remain within the root filesystem" +msgstr "Цей каталог ма╓ знаходитись на коренев╕й файлов╕й систем╕" -#: ../../security/help.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "" -"Arguments: (arg)\n" -"\n" -"Enable/Disable msec hourly security check." +msgid "CapsLock key" msgstr "" -#: ../../security/help.pm:1 +#: ../../steps.pm:1 #, c-format -msgid "" -"Arguments: (arg)\n" -"\n" -"Enable/Disable the logging of IPv4 strange packets." -msgstr "" +msgid "Install bootloader" +msgstr "Блок завантаження" -#: ../../security/help.pm:1 +#: ../../Xconfig/card.pm:1 +#, c-format +msgid "Select the memory size of your graphics card" +msgstr "Вибер╕ть розм╕р пам'ят╕ Вашо╖ граф╕чно╖ плати" + +#: ../../standalone.pm:1 #, c-format msgid "" -"Arguments: (arg)\n" +"[OPTIONS]\n" +"Network & Internet connection and monitoring application\n" "\n" -"Enable/Disable libsafe if libsafe is found on the system." +"--defaultintf interface : show this interface by default\n" +"--connect : connect to internet if not already connected\n" +"--disconnect : disconnect to internet if already connected\n" +"--force : used with (dis)connect : force (dis)connection.\n" +"--status : returns 1 if connected 0 otherwise, then exit.\n" +"--quiet : don't be interactive. To be used with (dis)connect." msgstr "" -#: ../../security/help.pm:1 +#: ../../standalone/drakTermServ:1 #, c-format -msgid "" -"Arguments: (arg, alert=1)\n" -"\n" -"Enable/Disable IP spoofing protection." +msgid "Dynamic IP Address Pool:" msgstr "" -#: ../../security/help.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "" -"Arguments: (arg, alert=1)\n" -"\n" -"Enable/Disable name resolution spoofing protection. If\n" -"\\fIalert\\fP is true, also reports to syslog." -msgstr "" +msgid "LVM name?" +msgstr "Назва LVM?" -#: ../../security/help.pm:1 +#: ../../standalone/service_harddrake:1 #, c-format -msgid "" -"Arguments: (arg, expr='*.*', dev='tty12')\n" -"\n" -"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n" -"expression describing what to log (see syslog.conf(5) for more details) and\n" -"dev the device to report the log." +msgid "Some devices in the \"%s\" hardware class were removed:\n" msgstr "" -#: ../../security/help.pm:1 +#: ../../modules/interactive.pm:1 #, c-format -msgid "" -"Arguments: (arg)\n" -"\n" -"Enable/Disable crontab and at for users. Put allowed users in /etc/cron." -"allow and /etc/at.allow\n" -"(see man at(1) and crontab(1))." -msgstr "" +msgid "Found %s %s interfaces" +msgstr "Знайден╕ ╕нтерфейси %s %s" -#: ../../security/help.pm:1 +#: ../../standalone/drakperm:1 #, c-format -msgid "" -"Arguments: ()\n" -"\n" -"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n" -"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/" -"server\n" -"to point to /etc/security/msec/server.. The /etc/security/msec/" -"server\n" -"is used by chkconfig --add to decide to add a service if it is present in " -"the file\n" -"during the installation of packages." +msgid "sticky-bit" msgstr "" -#: ../../security/help.pm:1 +#: ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "Post Install" +msgstr "Установка" + +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "The internal domain name" +msgstr "Нова назва принтера" + +#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format -msgid "" -"Arguments: (arg)\n" -"\n" -"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if " -"\\fIarg\\fP = ALL. Only local ones\n" -"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the " -"services you need, use /etc/hosts.allow\n" -"(see hosts.allow(5))." -msgstr "" +msgid "Card IRQ" +msgstr "Перепин картки" #: ../../security/help.pm:1 #, c-format msgid "" -"Arguments: (arg)\n" +"Arguments: (umask)\n" "\n" -"The argument specifies if clients are authorized to connect\n" -"to the X server on the tcp port 6000 or not." +"Set the user umask." msgstr "" -#: ../../security/help.pm:1 +#: ../../ugtk.pm:1 ../../standalone/logdrake:1 #, c-format -msgid "" -"Arguments: (arg, listen_tcp=None)\n" -"\n" -"Allow/Forbid X connections. First arg specifies what is done\n" -"on the client side: ALL (all connections are allowed), LOCAL (only\n" -"local connection) and NONE (no connection)." -msgstr "" +msgid "logdrake" +msgstr "logdrake" -#: ../../security/help.pm:1 +#: ../../standalone.pm:1 #, c-format msgid "" -"Arguments: (arg)\n" -"\n" -"Allow/Forbid the list of users on the system on display managers (kdm and " -"gdm)." +"Font Importation and monitoring " +"application \n" +"--windows_import : import from all available windows partitions.\n" +"--xls_fonts : show all fonts that already exist from xls\n" +"--strong : strong verification of font.\n" +"--install : accept any font file and any directry.\n" +"--uninstall : uninstall any font or any directory of font.\n" +"--replace : replace all font if already exist\n" +"--application : 0 none application.\n" +" : 1 all application available supported.\n" +" : name_of_application like so for staroffice \n" +" : and gs for ghostscript for only this one." msgstr "" -#: ../../security/help.pm:1 +#: ../../standalone.pm:1 #, c-format -msgid "" -"Arguments: (arg)\n" -"\n" -"Allow/Forbid direct root login." +msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" msgstr "" -#: ../../security/help.pm:1 +#: ../../any.pm:1 #, c-format -msgid "" -"Arguments: (arg)\n" -"\n" -"Allow/Forbid remote root login." +msgid "Choose the floppy drive you want to use to make the bootdisk" msgstr "" +"Вибер╕ть прив╕д дискети, який Ви хочете використовувати для створення\n" +"авар╕йно╖ дискети" -#: ../../security/help.pm:1 +#: ../../bootloader.pm:1 ../../help.pm:1 #, c-format -msgid "" -"Arguments: (arg)\n" -"\n" -"Allow/Forbid reboot by the console user." -msgstr "" +msgid "LILO with text menu" +msgstr "LILO з текстовим меню" -#: ../../security/help.pm:1 +#: ../../network/drakfirewall.pm:1 #, c-format -msgid "" -"Arguments: (arg)\n" -"\n" -"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg" -"\\fP = NONE no issues are\n" -"allowed else only /etc/issue is allowed." +msgid "Everything (no firewall)" msgstr "" -#: ../../security/help.pm:1 +#: ../../any.pm:1 #, c-format -msgid "" -"Arguments: (arg)\n" -"\n" -"Allow/Forbid autologin." +msgid "You must specify a kernel image" msgstr "" -#: ../../security/help.pm:1 +#: ../../printer/main.pm:1 #, c-format -msgid "" -"Arguments: (arg)\n" -"\n" -" Accept/Refuse icmp echo." +msgid ", multi-function device on USB" msgstr "" -#: ../../security/help.pm:1 +#: ../../interactive/newt.pm:1 +#, fuzzy, c-format +msgid "Do" +msgstr "Зак╕нчено" + +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "" -"Arguments: (arg)\n" -"\n" -" Accept/Refuse broadcasted icmp echo." -msgstr "" +msgid "Contacting the mirror to get the list of available packages..." +msgstr "Зв'язуюсь з сервером щоб прочитати список наявних пакет╕в" -#: ../../security/help.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "" -"Arguments: (arg)\n" -"\n" -"Accept/Refuse bogus IPv4 error messages." -msgstr "" +msgid "Lithuanian AZERTY (old)" +msgstr "Литовська AZERTY (стара)" -#: ../../security/level.pm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Security Administrator (login or email)" +msgid "Brazilian (ABNT-2)" +msgstr "Браз╕л╕йська (ABNT-2)" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "IP address of host/network:" msgstr "" -#: ../../security/level.pm:1 +#: ../../standalone/draksplash:1 #, c-format msgid "" -"A library which defends against buffer overflow and format string attacks." +"the progress bar y coordinate\n" +"of its upper left corner" msgstr "" -#: ../../security/level.pm:1 -#, fuzzy, c-format -msgid "Use libsafe for servers" -msgstr "Вибер╕ть параметри для сервера" - -#: ../../security/level.pm:1 +#: ../../install_gtk.pm:1 #, fuzzy, c-format -msgid "Security level" -msgstr "Встановлення р╕вня безпеки" +msgid "System installation" +msgstr "Установка SILO" -#: ../../security/level.pm:1 -#, fuzzy, c-format -msgid "Please choose the desired security level" -msgstr "Вибер╕ть р╕вень захисту" +#: ../../lang.pm:1 +#, c-format +msgid "Saint Vincent and the Grenadines" +msgstr "Св. В╕нсент ╕ Гренад╕нз" -#: ../../security/level.pm:1 -#, fuzzy, c-format -msgid "DrakSec Basic Options" -msgstr "Параметри" +#: ../../standalone/logdrake:1 +#, c-format +msgid "/File/_Open" +msgstr "/Файл/_В╕дкрити" -#: ../../security/level.pm:1 -#, fuzzy, c-format +#: ../../security/help.pm:1 +#, c-format msgid "" -"This is similar to the previous level, but the system is entirely closed and " -"security features are at their maximum." +"Arguments: (arg)\n" +"\n" +"The argument specifies if clients are authorized to connect\n" +"to the X server on the tcp port 6000 or not." msgstr "" -"Ми вмика╓мо 4 р╕вень безпеки, але тепер система ╓ повн╕стю закритою.\n" -"Вс╕ режими безпеки тепер на найвищому р╕вн╕." -#: ../../security/level.pm:1 +#: ../../standalone/drakpxe:1 #, fuzzy, c-format -msgid "" -"With this security level, the use of this system as a server becomes " -"possible.\n" -"The security is now high enough to use the system as a server which can " -"accept\n" -"connections from many clients. Note: if your machine is only a client on the " -"Internet, you should choose a lower level." -msgstr "" -"На цьому р╕вн╕ безпеки систему можна використовувати в якост╕ сервера.\n" -"Р╕вень безпеки для ц╕╓╖ системи тепер достатн╕й для того, щоб\n" -"використовувати ╖╖ як сервер, що допуска╓ п╕д'╓днання до нього\n" -"багатьох кл╕╓нт╕в." +msgid "Location of auto_install.cfg file" +msgstr "Створення автоустановочно╖ дискети" -#: ../../security/level.pm:1 +#: ../../any.pm:1 #, c-format -msgid "" -"There are already some restrictions, and more automatic checks are run every " -"night." -msgstr "" +msgid "Open Firmware Delay" +msgstr "Затримка Open Firmware" + +#: ../../lang.pm:1 +#, c-format +msgid "Hungary" +msgstr "Угорщина" -#: ../../security/level.pm:1 +#: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "" -"This is the standard security recommended for a computer that will be used " -"to connect to the Internet as a client." -msgstr "" -"Це - стандартний р╕вень безпеки, який рекоменду╓ться мати на\n" -"комп'ютер╕, п╕дключеному до ╕нтернету в якост╕ кл╕╓нта. Перев╕рки\n" -"безпеки тепер вмикнен╕." +msgid "Total progess" +msgstr "Тестую стор╕нки" -#: ../../security/level.pm:1 +#: ../../standalone/net_monitor:1 +#, fuzzy, c-format +msgid "Color configuration" +msgstr "Конф╕гурац╕я ╕нтернету" + +#: ../../lang.pm:1 #, c-format -msgid "" -"Passwords are now enabled, but use as a networked computer is still not " -"recommended." -msgstr "" -"Парол╕ тепер вмикнен╕, але все одно не рекоменду╓ться користуватися\n" -"цим комп'ютером в мереж╕." +msgid "New Zealand" +msgstr "Нова Зеланд╕я" #: ../../security/level.pm:1 #, c-format msgid "" -"This level is to be used with care. It makes your system more easy to use,\n" -"but very sensitive. It must not be used for a machine connected to others\n" -"or to the Internet. There is no password access." +"There are already some restrictions, and more automatic checks are run every " +"night." msgstr "" -"Цей р╕вень потр╕бно використовувати з обережн╕стю. В╕н дозволя╓ б╕льш\n" -"просте користування Вашою системою, але ╓ надзвичайно ненад╕йним. Не\n" -"можна користуватися такою системою, коли вона п╕д'╓днана мережею до\n" -"╕нших систем, або до ╕нтернету. Парол╕ не використовуються в ц╕й\n" -"систем╕." - -#: ../../security/level.pm:1 -#, c-format -msgid "Paranoid" -msgstr "Парано╕дальний" -#: ../../security/level.pm:1 +#: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "Higher" -msgstr "Високий" +msgid "please choose the date to restore" +msgstr "Який тип миш╕ ви ма╓те?" -#: ../../security/level.pm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "High" -msgstr "Високий" +msgid "Switching from ext2 to ext3" +msgstr "Перемикаюсь з ext2 на ext3" -#: ../../security/level.pm:1 +#: ../../printer/data.pm:1 #, c-format -msgid "Poor" -msgstr "Дуже низький" +msgid "LPRng" +msgstr "LPRng" -#: ../../security/level.pm:1 +#: ../../lang.pm:1 #, c-format -msgid "Welcome To Crackers" -msgstr "Зломщики! Ласкаво просимо!" +msgid "Netherlands Antilles" +msgstr "Голандськ╕ Антильськ╕ острови" -#: ../../standalone/XFdrake:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Please relog into %s to activate the changes" -msgstr "Заре╓струйтеся, будь-ласка, ще раз у %s щоб привести у д╕ю зм╕ни" +msgid "Browse to new restore repository." +msgstr "" -#: ../../standalone/XFdrake:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Please log out and then use Ctrl-Alt-BackSpace" +msgid "" +"\n" +"Welcome to the Printer Setup Wizard\n" +"\n" +"This wizard allows you to install local or remote printers to be used from " +"this machine and also from other machines in the network.\n" +"\n" +"It asks you for all necessary information to set up the printer and gives " +"you access to all available printer drivers, driver options, and printer " +"connection types." msgstr "" -"Будь-ласка, вийд╕ть ╕з системи ╕ пот╕м скористуйтеся Ctrl-Alt-BackSpace" -#: ../../standalone/drakTermServ:1 +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "and %d unknown printers" +msgstr "Додати принтер" + +#: ../../standalone/harddrake2:1 #, c-format -msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed" +msgid "" +"Early Intel Pentium chips manufactured have a bug in their floating point " +"processor which did not achieve the required precision when performing a " +"Floating point DIVision (FDIV)" msgstr "" -#: ../../standalone/drakTermServ:1 +#: ../../network/isdn.pm:1 #, c-format -msgid "Need to create /etc/dhcpd.conf first!" -msgstr "" +msgid "No ISDN PCI card found. Please select one on the next screen." +msgstr "Не знайдено плати ISDN PCI. Вибер╕ть одну ╕з плат у наступному в╕кн╕." -#: ../../standalone/drakTermServ:1 +#: ../../common.pm:1 #, c-format -msgid "Something went wrong! - Is mkisofs installed?" -msgstr "" +msgid "GB" +msgstr "╫б" -#: ../../standalone/drakTermServ:1 +#: ../../any.pm:1 #, c-format -msgid "Etherboot ISO image is %s" -msgstr "" +msgid "Please give a user name" +msgstr "Дайте, будь-ласка, ╕м'я користувача" -#: ../../standalone/drakTermServ:1 -#, fuzzy, c-format -msgid "No floppy drive available!" -msgstr "Нема╓ привода дискети" +#: ../../any.pm:1 +#, c-format +msgid "Enable CD Boot?" +msgstr "Дозволити завантаження з компакт-диску?" -#: ../../standalone/drakTermServ:1 +#: ../../interactive/stdio.pm:1 #, c-format -msgid "Floppy can be removed now" +msgid " enter `void' for void entry" msgstr "" -#: ../../standalone/drakTermServ:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Couldn't access the floppy!" +msgid "on Hard Drive" msgstr "" -#: ../../standalone/drakTermServ:1 -#, fuzzy, c-format -msgid "Please insert floppy disk:" -msgstr "Вставте системну дискету, яка вживалася в дисковод╕ %s" - -#: ../../standalone/drakTermServ:1 +#: ../../network/netconnect.pm:1 #, fuzzy, c-format -msgid "Write Config" -msgstr "перенастро╖ти" +msgid "Winmodem connection" +msgstr "Звичайне з'╓днання по модему" -#: ../../standalone/drakTermServ:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Dynamic IP Address Pool:" +msgid "" +"\n" +"Congratulations, your printer is now installed and configured!\n" +"\n" +"You can print using the \"Print\" command of your application (usually in " +"the \"File\" menu).\n" +"\n" +"If you want to add, remove, or rename a printer, or if you want to change " +"the default option settings (paper input tray, printout quality, ...), " +"select \"Printer\" in the \"Hardware\" section of the Mandrake Control " +"Center." msgstr "" -#: ../../standalone/drakTermServ:1 +#: ../../security/help.pm:1 #, c-format msgid "" -"Most of these values were extracted\n" -"from your running system.\n" -"You can modify as needed." +"Arguments: (arg)\n" +"\n" +"Set the password history length to prevent password reuse." msgstr "" -#: ../../standalone/drakTermServ:1 -#, fuzzy, c-format -msgid "dhcpd Server Configuration" -msgstr "Конф╕╜урац╕я локально╖ мереж╕" - -#: ../../standalone/drakTermServ:1 +#: ../../standalone/drakxtv:1 #, c-format -msgid "IP Range End:" +msgid "Now, you can run xawtv (under X Window!) !\n" msgstr "" -#: ../../standalone/drakTermServ:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "IP Range Start:" +msgid "Not enough swap space to fulfill installation, please add some" msgstr "" +"Не вистача╓ своп-пам'ят╕ щоб зак╕нчити установку. Зб╕льш╕ть\n" +"╖╖. будь-ласка." -#: ../../standalone/drakTermServ:1 -#, fuzzy, c-format -msgid "Name Servers:" -msgstr "Сервер NIS" - -#: ../../standalone/drakTermServ:1 +#. -PO: example: lilo-graphic on /dev/hda1 +#: ../../install_steps_interactive.pm:1 #, fuzzy, c-format -msgid "Domain Name:" -msgstr "Назва домену" +msgid "%s on %s" +msgstr "Порт" -#: ../../standalone/drakTermServ:1 +#: ../../help.pm:1 #, c-format -msgid "Broadcast Address:" +msgid "" +"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n" +"local time according to the time zone you selected. If the clock on your\n" +"motherboard is set to local time, you may deactivate this by unselecting\n" +"\"%s\", which will let GNU/Linux know that the system clock and the\n" +"hardware clock are in the same timezone. This is useful when the machine\n" +"also hosts another operating system like Windows.\n" +"\n" +"The \"%s\" option will automatically regulate the clock by connecting to a\n" +"remote time server on the Internet. For this feature to work, you must have\n" +"a working Internet connection. It is best to choose a time server located\n" +"near you. This option actually installs a time server that can used by\n" +"other machines on your local network as well." msgstr "" -#: ../../standalone/drakTermServ:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "Subnet Mask:" -msgstr "" +msgid "Which is your timezone?" +msgstr "В як╕й часов╕й смуз╕ Ви знаходитесь?" -#: ../../standalone/drakTermServ:1 +#: ../../lang.pm:1 #, c-format -msgid "Routers:" -msgstr "" +msgid "Guinea" +msgstr "╫в╕нея" -#: ../../standalone/drakTermServ:1 +#: ../../network/tools.pm:1 #, fuzzy, c-format -msgid "Netmask:" -msgstr "Маска мереж╕" +msgid "The system is now connected to the Internet." +msgstr "Система з'╓днана з ╕нтернетом." -#: ../../standalone/drakTermServ:1 -#, c-format -msgid "Subnet:" -msgstr "" +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "South Georgia and the South Sandwich Islands" +msgstr "П╕вдена Джордж╕я ╕ П╕вден╕ Сандв╕чськ╕ острови" -#: ../../standalone/drakTermServ:1 +#: ../../standalone/drakxtv:1 #, c-format -msgid "" -"Need to restart the Display Manager for full changes to take effect. \n" -"(service dm restart - at the console)" +msgid "Japan (broadcast)" msgstr "" -#: ../../standalone/drakTermServ:1 -#, fuzzy, c-format -msgid "dhcpd Config..." -msgstr "Конф╕гурац╕я..." +#: ../../lang.pm:1 +#, c-format +msgid "Mozambique" +msgstr "Мозамб╕к" -#: ../../standalone/drakTermServ:1 -#, fuzzy, c-format -msgid "Delete Client" -msgstr "Кл╕╓нт DHCP" +#: ../../any.pm:1 +#, c-format +msgid "Icon" +msgstr "П╕ктограма" -#: ../../standalone/drakTermServ:1 +#: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "<-- Edit Client" -msgstr "Кл╕╓нт DHCP" +msgid "Please choose what you want to backup" +msgstr "Вибер╕ть пакети, як╕ Ви хочете встановити" -#: ../../standalone/drakTermServ:1 +#: ../../Xconfig/resolution_and_depth.pm:1 #, c-format -msgid "Add Client -->" -msgstr "" +msgid "256 colors (8 bits)" +msgstr "265 кольор╕в (8 б╕т)" -#: ../../standalone/drakTermServ:1 -#, fuzzy, c-format -msgid "Allow Thin Clients" -msgstr "Кл╕╓нт DHCP" +#: ../../any.pm:1 +#, c-format +msgid "Read-write" +msgstr "Запис/читання" -#: ../../standalone/drakTermServ:1 -#, fuzzy, c-format -msgid "Thin Client" -msgstr "Кл╕╓нт DHCP" +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Size: %s\n" +msgstr "Розм╕р: %s\n" -#: ../../standalone/drakTermServ:1 +#: ../../standalone/drakconnect:1 #, c-format -msgid "No net boot images created!" -msgstr "" +msgid "Hostname: " +msgstr "╤м'я хоста:" -#: ../../standalone/drakTermServ:1 -#, fuzzy, c-format -msgid "type: %s" -msgstr "Тип: " +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Chunk size %s\n" +msgstr "Розм╕р д╕лянки %s\n" -#: ../../standalone/drakTermServ:1 +#: ../../share/advertising/02-community.pl:1 #, c-format -msgid "<-- Del User" +msgid "Build the future of Linux!" msgstr "" -#: ../../standalone/drakTermServ:1 +#: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "Add User -->" -msgstr "Додати користувача" +msgid "Local Printer" +msgstr "Локальний принтер" -#: ../../standalone/drakTermServ:1 +#: ../../standalone/drakbackup:1 #, c-format msgid "" -"!!! Indicates the password in the system database is different than\n" -" the one in the Terminal Server database.\n" -"Delete/re-add the user to the Terminal Server to enable login." +" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien " msgstr "" -#: ../../standalone/drakTermServ:1 -#, fuzzy, c-format -msgid "Delete All NBIs" -msgstr "Вибер╕ть файл" +#: ../../standalone.pm:1 +#, c-format +msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" +msgstr "" -#: ../../standalone/drakTermServ:1 -#, fuzzy, c-format -msgid "<-- Delete" -msgstr "Стерти" +#: ../../network/netconnect.pm:1 +#, c-format +msgid "ADSL connection" +msgstr "З'╓днання ADSL" -#: ../../standalone/drakTermServ:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "This will take a few minutes." +msgid "No configuration, please click Wizard or Advanced.\n" msgstr "" -#: ../../standalone/drakTermServ:1 +#: ../../standalone/drakautoinst:1 #, c-format -msgid "Build All Kernels -->" -msgstr "" +msgid "Error!" +msgstr "Помилка!" -#: ../../standalone/drakTermServ:1 -#, fuzzy, c-format -msgid "No NIC selected!" -msgstr "Нема╓ з'╓днання" +#: ../../network/netconnect.pm:1 +#, c-format +msgid "cable connection detected" +msgstr "Знайдено кабельне з'╓днання" -#: ../../standalone/drakTermServ:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Build Single NIC -->" +msgid "Permission denied transferring %s to %s" msgstr "" -#: ../../standalone/drakTermServ:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "No kernel selected!" -msgstr "" +msgid "/_Report Bug" +msgstr "/_R Пов╕домити про помилку" -#: ../../standalone/drakTermServ:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Build Whole Kernel -->" -msgstr "" +msgid "Resize" +msgstr "Зм╕нити розм╕р" -#: ../../standalone/drakTermServ:1 +#: ../../lang.pm:1 #, c-format -msgid "Boot ISO" -msgstr "" +msgid "Dominica" +msgstr "Дом╕н╕ка" -#: ../../standalone/drakTermServ:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Boot Floppy" +msgid "Please enter the device name to use for backup" msgstr "" -#: ../../standalone/drakTermServ:1 +#: ../../Xconfig/various.pm:1 #, c-format -msgid "" -"drakTermServ Overview\n" -"\t\t\t \n" -" - Create Etherboot Enabled Boot Images:\n" -" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image " -"must be created.\n" -" \t\tmkinitrd-net does much of this work and drakTermServ is just a " -"graphical interface\n" -" \t\tto help manage/customize these images.\n" -"\n" -" - Maintain /etc/dhcpd.conf:\n" -" \t\tTo net boot clients, each client needs a dhcpd.conf entry, " -"assigning an IP address\n" -" \t\tand net boot images to the machine. drakTermServ helps create/" -"remove these entries.\n" -"\t\t\t\n" -" \t\t(PCI cards may omit the image - etherboot will request the " -"correct image. You should\n" -" \t\talso consider that when etherboot looks for the images, it " -"expects names like\n" -" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" -"\t\t\t \n" -" \t\tA typical dhcpd.conf stanza to support a diskless client looks " -"like:\n" -" \t\t\n" -"\t\t\t\thost curly {\n" -"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n" -"\t\t\t\t\tfixed-address 192.168.192.3;\n" -"\t\t\t\t\t#type fat;\n" -"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk." -"nbi\";\n" -"\t\t\t\t}\n" -"\t\t\t\n" -"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific " -"entry for\n" -"\t\t\ta client machine, using a fixed address scheme facilitates using the " -"functionality\n" -"\t\t\tof client-specific configuration files that ClusterNFS provides.\n" -"\t\t\t\n" -"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can " -"either be \"thin\"\n" -"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, " -"while fat clients run most\n" -"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\" -"$IP=client_ip\\$\\$ is\n" -"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and " -"gdm.conf are modified\n" -"\t\t\tif thin clients are used, to enable xdmcp. Since there are security " -"issues in using xdmcp,\n" -"\t\t\thosts.deny and hosts.allow are modified to limit access to the local " -"subnet.\n" -"\t\t\t\n" -"\t\t\tNote: You must stop/start the server after adding or changing " -"clients.\n" -"\t\t\t\n" -" - Maintain /etc/exports:\n" -" \t\tClusternfs allows export of the root filesystem to diskless " -"clients. drakTermServ\n" -" \t\tsets up the correct entry to allow anonymous access to the root " -"filesystem from\n" -" \t\tdiskless clients.\n" -"\n" -" \t\tA typical exports entry for clusternfs is:\n" -" \t\t\n" -" \t\t/ (ro,all_squash)\n" -" \t\t/home SUBNET/MASK(rw,root_squash)\n" -"\t\t\t\n" -"\t\t\tWith SUBNET/MASK being defined for your network.\n" -" \t\t\n" -" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n" -" \t\tFor users to be able to log into the system from a diskless " -"client, their entry in\n" -" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$" -"\\$. drakTermServ helps\n" -" \t\tin this respect by adding or removing system users from this " -"file.\n" -"\n" -" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n" -" \t\tThrough clusternfs, each diskless client can have it's own " -"unique configuration files\n" -" \t\ton the root filesystem of the server. In the future drakTermServ " -"will help create these\n" -" \t\tfiles.\n" -"\n" -" - Per client system configuration files:\n" -" \t\tThrough clusternfs, each diskless client can have it's own " -"unique configuration files\n" -" \t\ton the root filesystem of the server. In the future, " -"drakTermServ can help create files\n" -" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/" -"keyboard on a per-client\n" -" \t\tbasis.\n" -"\n" -" - /etc/xinetd.d/tftp:\n" -" \t\tdrakTermServ will configure this file to work in conjunction " -"with the images created by\n" -" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up " -"the boot image to each\n" -" \t\tdiskless client.\n" -"\n" -" \t\tA typical tftp configuration file looks like:\n" -" \t\t\n" -" \t\tservice tftp\n" -" \t\t(\n" -" disable = no\n" -" socket_type = dgram\n" -" protocol = udp\n" -" wait = yes\n" -" user = root\n" -" server = /usr/sbin/in.tftpd\n" -" server_args = -s /var/lib/tftpboot\n" -" \t\t}\n" -" \t\t\n" -" \t\tThe changes here from the default installation are changing the " -"disable flag to\n" -" \t\t'no' and changing the directory path to /var/lib/tftpboot, where " -"mkinitrd-net\n" -" \t\tputs it's images.\n" -"\n" -" - Create etherboot floppies/CDs:\n" -" \t\tThe diskless client machines need either ROM images on the NIC, " -"or a boot floppy\n" -" \t\tor CD to initate the boot sequence. drakTermServ will help " -"generate these images,\n" -" \t\tbased on the NIC in the client machine.\n" -" \t\t\n" -" \t\tA basic example of creating a boot floppy for a 3Com 3c509 " -"manually:\n" -" \t\t\n" -" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n" -" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n" -" \n" -"\n" -msgstr "" +msgid "Resolution: %s\n" +msgstr "Розд╕льна здатн╕сть: %s\n" -#: ../../standalone/drakTermServ:1 +#: ../../standalone/logdrake:1 +#, c-format +msgid "matching" +msgstr "в╕дпов╕да╓" + +#: ../../install2.pm:1 #, c-format msgid "" -"\n" -"\n" -" Thanks:\n" -"\t- LTSP Project http://www.ltsp.org\n" -"\t- Michael Brown \n" -"\n" +"Can't access kernel modules corresponding to your kernel (file %s is " +"missing), this generally means your boot floppy in not in sync with the " +"Installation medium (please create a newer boot floppy)" msgstr "" -#: ../../standalone/drakTermServ:1 +#: ../../help.pm:1 #, c-format msgid "" -"\n" -" Copyright (C) 2002 by MandrakeSoft \n" -"\tStew Benedict sbenedict\\@mandrakesoft.com\n" -"\n" +"Please select the correct port. For example, the \"COM1\" port under\n" +"Windows is named \"ttyS0\" under GNU/Linux." msgstr "" +"Будь-ласка, вибер╕ть в╕рний порт. Наприклад, порт п╕д назвою COM1 у MS\n" +"Windows носить назву ttyS0 у GNU/Л╕накс╕." -#: ../../standalone/drakTermServ:1 -#, fuzzy, c-format -msgid "Add/Del Clients" -msgstr "Кл╕╓нт DHCP" +#: ../../install_steps_gtk.pm:1 +#, c-format +msgid "The following packages are going to be removed" +msgstr "Ц╕ пакети будуть де╕нстальованими" -#: ../../standalone/drakTermServ:1 -#, fuzzy, c-format -msgid "Add/Del Users" -msgstr "Додати користувача" +#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1 +#, c-format +msgid "Connect to the Internet" +msgstr "З'╓днатися з ╕нтернетом" -#: ../../standalone/drakTermServ:1 +#: ../../install_interactive.pm:1 #, c-format -msgid "Net Boot Images" +msgid "Use existing partitions" +msgstr "Користуватися ╕снуючим п╕дрозд╕лом" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Canadian (Quebec)" +msgstr "Канадська (Квебек)" + +#: ../../Xconfig/various.pm:1 +#, c-format +msgid "Mouse device: %s\n" +msgstr "Спец╕альний пристр╕й миш╕: %s\n" + +#: ../../standalone/drakfont:1 +#, c-format +msgid "Reselect correct fonts" msgstr "" -#: ../../standalone/drakTermServ:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Etherboot Floppy/ISO" +msgid "" +"Options Description:\n" +"\n" +"Please be careful when you are using ftp backup, because only \n" +"backups that are already built are sent to the server.\n" +"So at the moment, you need to build the backup on your hard \n" +"drive before sending it to the server.\n" +"\n" msgstr "" -#: ../../standalone/drakTermServ:1 +#: ../../help.pm:1 #, fuzzy, c-format -msgid "Stop Server" -msgstr "Сервер NIS" +msgid "" +"Options\n" +"\n" +" Here you can choose whether you want to have your machine automatically\n" +"switch to a graphical interface at boot. Obviously, you want to check\n" +"\"%s\" if your machine is to act as a server, or if you were not successful\n" +"in getting the display configured." +msgstr "" +"П╕сля цього Вам буде задане запитання, чи хот╕ли б Ви, щоб граф╕чний\n" +"╕нтерфейс вмикався автоматично при завантаженн╕ системи. Зауважте, що\n" +"це запитання буде задане нав╕ть якщо Ви в╕дмовитесь в╕д випробовування\n" +"конф╕╜урац╕╖. Звичайно ж, якщо Ваша машина буде працювати сервером,\n" +"або якщо Ви не змогли в╕рно настро╖ти X, тут краще в╕дпов╕сти \"Н╕\"." -#: ../../standalone/drakTermServ:1 -#, fuzzy, c-format -msgid "Start Server" -msgstr "Сервер NIS" +#: ../../network/netconnect.pm:1 +#, c-format +msgid "We are now going to configure the %s connection." +msgstr "Зараз буде сконф╕╜уровано з'╓днання %s." -#: ../../standalone/drakTermServ:1 +#: ../../share/advertising/13-mdkexpert_corporate.pl:1 #, fuzzy, c-format -msgid "Disable Server" -msgstr "База даних" +msgid "MandrakeExpert Corporate" +msgstr "експерт" -#: ../../standalone/drakTermServ:1 -#, fuzzy, c-format -msgid "Enable Server" -msgstr "База даних" +#: ../../standalone.pm:1 +#, c-format +msgid "" +" [everything]\n" +" XFdrake [--noauto] monitor\n" +" XFdrake resolution" +msgstr "" -#: ../../standalone/drakTermServ:1 +#: ../../standalone/harddrake2:1 #, fuzzy, c-format -msgid "Mandrake Terminal Server Configuration" -msgstr "Перен╕с конф╕гурац╕╖ принтер╕в " +msgid "Write protection" +msgstr "Користуватися автовизначенням" -#: ../../standalone/drakautoinst:1 +#: ../../standalone/drakfont:1 #, fuzzy, c-format -msgid "Remove the last item" -msgstr "Стертифайлу зворотнього монтування?" +msgid "You've not selected any font" +msgstr "Видалити принтер" -#: ../../standalone/drakautoinst:1 -#, fuzzy, c-format -msgid "Add an item" -msgstr "Додати користувача" +#: ../../steps.pm:1 +#, c-format +msgid "Language" +msgstr "Вибер╕ть мову" -#: ../../standalone/drakautoinst:1 -#, fuzzy, c-format -msgid "Auto Install" -msgstr "Установка" +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Printer model selection" +msgstr "Виб╕р модел╕ принтера" -#: ../../standalone/drakautoinst:1 +#: ../../diskdrake/interactive.pm:1 #, c-format msgid "" -"The floppy has been successfully generated.\n" -"You may now replay your installation." +"After changing type of partition %s, all data on this partition will be lost" msgstr "" -"Дискета створена усп╕шно.\n" -"Ви можете повторити установку." +"П╕сля зм╕ни типу п╕дрозд╕лу диску %s, вс╕ дан╕ на цьому п╕дрозд╕л╕ \n" +"будуть втрачен╕" -#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1 -#: ../../standalone/scannerdrake:1 +#: ../../common.pm:1 #, c-format -msgid "Congratulations!" -msgstr "В╕тання!" +msgid "%d seconds" +msgstr "%d секунд" -#: ../../standalone/drakautoinst:1 +#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1 #, c-format -msgid "" -"\n" -"Welcome.\n" -"\n" -"The parameters of the auto-install are available in the sections on the left" +msgid "Insert a blank floppy in drive %s" +msgstr "Вставте чисту дискету в дисков╕д %s" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "A valid URI must be entered!" +msgstr "Потр╕бно ввести коректний URI!" + +#: ../../network/isdn.pm:1 +#, c-format +msgid "Found \"%s\" interface do you want to use it ?" msgstr "" -#: ../../standalone/drakautoinst:1 +#: ../../standalone/drakgw:1 +#, c-format +msgid "Re-configure interface and DHCP server" +msgstr "" + +#: ../../harddrake/sound.pm:1 #, fuzzy, c-format -msgid "Creating auto install floppy" -msgstr "Створення автоустановочно╖ дискети" +msgid "Sound configuration" +msgstr "Конф╕╜урац╕я" -#: ../../standalone/drakautoinst:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "manual" -msgstr "" +msgid "Photo test page" +msgstr "Тестова стор╕нка фотограф╕чно╖ якост╕" -#: ../../standalone/drakautoinst:1 +#: ../../help.pm:1 ../../install_interactive.pm:1 #, c-format -msgid "" -"Please choose for each step whether it will replay like your install, or it " -"will be manual" +msgid "Custom disk partitioning" +msgstr "Спец╕альний розпод╕л диску" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Enter Printer Name and Comments" msgstr "" -"Для кожного кроку, будь ласка, вкаж╕ть чи при повторн╕й установц╕ цей\n" -"крок викона╓ться автоматично, чи вручну." -#: ../../standalone/drakautoinst:1 +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"The following printers\n" +"\n" +"%s%s\n" +"are directly connected to your system" +msgstr "У Ваш╕й систем╕ нема╓ адаптера мереж╕!" + +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "type: %s" +msgstr "Тип: " + +#: ../../keyboard.pm:1 #, c-format -msgid "Automatic Steps Configuration" -msgstr "Конф╕╜урац╕я крок╕в установки" +msgid "Slovakian (QWERTY)" +msgstr "Словацька (QWERTY)" -#: ../../standalone/drakautoinst:1 +#: ../../standalone/draksound:1 #, fuzzy, c-format -msgid "replay" -msgstr "Повторити" +msgid "No Sound Card detected!" +msgstr "Нема╓ з'╓днання" -#: ../../standalone/drakautoinst:1 +#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1 +#, c-format +msgid "Mouse Port" +msgstr "Порт миш╕" + +#: ../../standalone/drakTermServ:1 #, c-format msgid "" -"You are about to configure an Auto Install floppy. This feature is somewhat " -"dangerous and must be used circumspectly.\n" -"\n" -"With that feature, you will be able to replay the installation you've " -"performed on this computer, being interactively prompted for some steps, in " -"order to change their values.\n" -"\n" -"For maximum safety, the partitioning and formatting will never be performed " -"automatically, whatever you chose during the install of this computer.\n" -"\n" -"Do you want to continue?" +"Need to restart the Display Manager for full changes to take effect. \n" +"(service dm restart - at the console)" msgstr "" -"Ви можете зараз настро╖ти дискету для автоматизовано╖ устаноки. Цей\n" -"режим установки дещо небезпечний ╕ ним треба користуватися\n" -"пом╕рковано.\n" -"\n" -"Користуючись цим режимом Ви можете повторити установку, що Ви\n" -"т╕льки-що виконали на дан╕й систем╕. На деяких етапах Вам будуть\n" -"задан╕ запитання, щоб зм╕нити значення к╕лькох зм╕нних.\n" -"\n" -"Для Вашо╖ безпеки, под╕л диску на п╕дрозд╕ли ╕ форматування н╕коли не\n" -"буде виконуватись автоматично незалежно в╕д того, що вибрано при\n" -"установц╕.\n" -"\n" -"Хочете продовжувати? " -#: ../../standalone/drakautoinst:1 +#: ../../standalone/logdrake:1 +#, fuzzy, c-format +msgid "Ftp Server" +msgstr "Сервер NIS" + +#: ../../security/help.pm:1 #, c-format -msgid "Auto Install Configurator" -msgstr "Конф╕╜урац╕я автоматично╖ установки" +msgid "" +"Arguments: (arg)\n" +"\n" +"Enable/Disable msec hourly security check." +msgstr "" -#: ../../standalone/drakautoinst:1 +#: ../../standalone/drakfont:1 #, c-format -msgid "I can't find needed image file `%s'." -msgstr "Не можу знайти потр╕бний файл ╕з зображенням `%s'" +msgid "%s fonts conversion" +msgstr "" -#: ../../standalone/drakautoinst:1 +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "the type of bus on which the mouse is connected" +msgstr "Вибер╕ть до якого посл╕довного порту при╓днано мишу?" + +#: ../../lang.pm:1 #, c-format -msgid "Error!" -msgstr "Помилка!" +msgid "Uganda" +msgstr "Уганда" -#: ../../standalone/drakbackup:1 +#: ../../security/help.pm:1 #, c-format msgid "" +"Arguments: (size)\n" "\n" -"Restore Backup Problems:\n" -"\n" -"During the restore step, Drakbackup will verify all your\n" -"backup files before restoring them.\n" -"Before the restore, Drakbackup will remove \n" -"your original directory, and you will loose all your \n" -"data. It is important to be careful and not modify the \n" -"backup data files by hand.\n" +"Set shell commands history size. A value of -1 means unlimited." msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../help.pm:1 #, c-format msgid "" -"options description:\n" +"As a review, DrakX will present a summary of information it has about your\n" +"system. Depending on your installed hardware, you may have some or all of\n" +"the following entries. Each entry is made up of the configuration item to\n" +"be configured, followed by a quick summary of the current configuration.\n" +"Click on the corresponding \"%s\" button to change that.\n" "\n" -"Please be careful when you are using ftp backup, because only \n" -"backups that are already built are sent to the server.\n" -"So at the moment, you need to build the backup on your hard \n" -"drive before sending it to the server.\n" +" * \"%s\": check the current keyboard map configuration and change that if\n" +"necessary.\n" +"\n" +" * \"%s\": check the current country selection. If you are not in this\n" +"country, click on the \"%s\" button and choose another one. If your country\n" +"is not in the first list shown, click the \"%s\" button to get the complete\n" +"country list.\n" +"\n" +" * \"%s\": By default, DrakX deduces your time zone based on the country\n" +"you have chosen. You can click on the \"%s\" button here if this is not\n" +"correct.\n" +"\n" +" * \"%s\": check the current mouse configuration and click on the button to\n" +"change it if necessary.\n" +"\n" +" * \"%s\": clicking on the \"%s\" button will open the printer\n" +"configuration wizard. Consult the corresponding chapter of the ``Starter\n" +"Guide'' for more information on how to setup a new printer. The interface\n" +"presented there is similar to the one used during installation.\n" +"\n" +" * \"%s\": if a sound card is detected on your system, it is displayed\n" +"here. If you notice the sound card displayed is not the one that is\n" +"actually present on your system, you can click on the button and choose\n" +"another driver.\n" +"\n" +" * \"%s\": by default, DrakX configures your graphical interface in\n" +"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n" +"\"%s\" to reconfigure your graphical interface.\n" "\n" +" * \"%s\": if a TV card is detected on your system, it is displayed here.\n" +"If you have a TV card and it is not detected, click on \"%s\" to try to\n" +"configure it manually.\n" +"\n" +" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n" +"here. You can click on \"%s\" to change the parameters associated with the\n" +"card.\n" +"\n" +" * \"%s\": If you want to configure your Internet or local network access\n" +"now.\n" +"\n" +" * \"%s\": this entry allows you to redefine the security level as set in a\n" +"previous step ().\n" +"\n" +" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n" +"idea to protect yourself from intrusions by setting up a firewall. Consult\n" +"the corresponding section of the ``Starter Guide'' for details about\n" +"firewall settings.\n" +"\n" +" * \"%s\": if you wish to change your bootloader configuration, click that\n" +"button. This should be reserved to advanced users.\n" +"\n" +" * \"%s\": here you'll be able to fine control which services will be run\n" +"on your machine. If you plan to use this machine as a server it's a good\n" +"idea to review this setup." msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../lang.pm:1 +#, c-format +msgid "Comoros" +msgstr "Коморськ╕ острови" + +#: ../../network/netconnect.pm:1 #, c-format msgid "" -"Description:\n" "\n" -" Drakbackup is used to backup your system.\n" -" During the configuration you can select: \n" -"\t- System files, \n" -"\t- Users files, \n" -"\t- Other files.\n" -"\tor All your system ... and Other (like Windows Partitions)\n" "\n" -" Drakbackup allows you to backup your system on:\n" -"\t- Harddrive.\n" -"\t- NFS.\n" -"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n" -"\t- FTP.\n" -"\t- Rsync.\n" -"\t- Webdav.\n" -"\t- Tape.\n" "\n" -" Drakbackup allows you to restore your system to\n" -" a user selected directory.\n" +"We are now going to configure the %s connection.\n" "\n" -" Per default all backups will be stored on your\n" -" /var/lib/drakbackup directory\n" "\n" -" Configuration file:\n" -"\t/etc/drakconf/drakbackup/drakbackup.conf\n" +"Press OK to continue." +msgstr "" "\n" -"Restore Step:\n" -" \n" -" During the restore step, DrakBackup will remove \n" -" your original directory and verify that all \n" -" backup files are not corrupted. It is recommended \n" -" you do a last backup before restoring.\n" "\n" "\n" -msgstr "" +"Зараз буде сконф╕╜уровано з'╓днання %s.\n" +"\n" +"\n" +"Натисн╕ть \"Гаразд\" для продовдження" -#: ../../standalone/drakbackup:1 +#: ../../standalone/drakboot:1 #, c-format -msgid "" -" updates 2002 MandrakeSoft by Stew Benedict " +msgid "Yaboot mode" +msgstr "Режим Yaboot" + +#: ../../standalone/drakxtv:1 +#, c-format +msgid "USA (cable)" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../standalone/drakboot:1 #, c-format msgid "" -" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien " +"Can't relaunch LiLo!\n" +"Launch \"lilo\" as root in command line to complete LiLo theme installation." msgstr "" +#: ../../mouse.pm:1 +#, c-format +msgid "Generic 3 Button Mouse" +msgstr "Звичайна 3х кнопочна мишка" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Select another media to restore from" +msgstr "Який тип миш╕ ви ма╓те?" + +#: ../../standalone/drakbug:1 +#, fuzzy, c-format +msgid "Software Manager" +msgstr "Назва ресурсу" + #: ../../standalone/drakbackup:1 #, c-format msgid "" -"restore description:\n" +"Restore Description:\n" " \n" "Only the most recent date will be used, because with incremental \n" "backups it is necessary to restore one by one each older backup.\n" @@ -13304,344 +12621,549 @@ msgid "" "\n" " - Incremental Backups:\n" "\n" -"\tThe incremental backup is the most powerful \n" -"\toption to use. This option allows you to \n" -"\tbackup all of your data the first time, and \n" -"\tonly the changed data after.\n" -"\tSo you will be able, during the restore\n" -"\tstep, to restore your data from a specified\n" -"\tdate.\n" -"\tIf you have not selected this option all\n" -"\told backups are deleted before each backup. \n" -"\n" +"\tThe incremental backup is the most powerful option for \n" +"\tbackup. This option allows you to backup all your data \n" +"\tthe first time, and only the changed data afterward.\n" +"\tThen you will be able, during the restore step, to restore \n" +"\tyour data from a specified date. If you have not selected \n" +"\tthis option all old backups are deleted before each backup. \n" "\n" +" - Differential Backups:\n" +" \n" +"\tThe differential backup, rather than comparing changes in the\n" +"\tdata to the previous incremental backup, always compares the\n" +"\tdata to the initial base backup. This method allows one to\n" +"\trestore the base and then the differential from a certain date.\n" "\n" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../interactive/stdio.pm:1 #, c-format -msgid "" -"options description:\n" -"\n" -" - Backup system files:\n" -" \n" -"\tThis option allows you to backup your /etc directory,\n" -"\twhich contains all configuration files. Please be\n" -"\tcareful during the restore step to not overwrite:\n" -"\t\t/etc/passwd \n" -"\t\t/etc/group \n" -"\t\t/etc/fstab\n" -"\n" -" - Backup User files: \n" -"\n" -"\tThis option allows you select all users that you want \n" -"\tto backup.\n" -"\tTo preserve disk space, it is recommended that you \n" -"\tdo not include the web browser's cache.\n" -"\n" -" - Backup Other files: \n" -"\n" -"\tThis option allows you to add more data to save.\n" -"\tWith the other backup it's not possible at the \n" -"\tmoment to select incremental backup.\t\t\n" -" \n" -" - Incremental Backups:\n" -"\n" -"\tThe incremental backup is the most powerful \n" -"\toption for backup. This option allows you \n" -"\tto backup all your data the first time, and \n" -"\tonly the changed data afterward.\n" -"\tThen you will be able, during the restore\n" -"\tstep, to restore your data from a specified\n" -"\tdate.\n" -"\tIf you have not selected this option all\n" -"\told backups are deleted before each backup. \n" -"\n" -"\n" +msgid "Re-submit" msgstr "" #: ../../standalone/drakbackup:1 #, c-format -msgid "" -"\n" -" Some errors during sendmail are caused by \n" -" a bad configuration of postfix. To solve it you have to\n" -" set myhostname or mydomain in /etc/postfix/main.cf\n" -"\n" +msgid "CD in place - continue." +msgstr "" + +#: ../../common.pm:1 +#, c-format +msgid "KB" +msgstr "кб" + +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Network & Internet" +msgstr "╤нтерфейс мереж╕" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Lithuanian \"phonetic\" QWERTY" +msgstr "Литовська \"фонетична\" QWERTY" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "Net Boot Images" +msgstr "" + +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "Sharing of local scanners" +msgstr "Локальний принтер" + +#: ../../Xconfig/monitor.pm:1 +#, c-format +msgid "Plug'n Play probing failed. Please select the correct monitor" +msgstr "" + +#: ../../services.pm:1 +#, c-format +msgid "Services and deamons" +msgstr "Серв╕си та демони" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Remote host name missing!" +msgstr "Нема╓ назви в╕ддаленого хоста!" + +#: ../../fsedit.pm:1 +#, c-format +msgid "with /usr" msgstr "" +#: ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Network" +msgstr "Мережа:" + +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "" -"options description:\n" -"\n" -" In this step Drakbackup allow you to change:\n" -"\n" -" - The compression mode:\n" -" \n" -" If you check bzip2 compression, you will compress\n" -" your data better than gzip (about 2-10 %%).\n" -" This option is not checked by default because\n" -" this compression mode needs more time (about 1000%% more).\n" -" \n" -" - The update mode:\n" -"\n" -" This option will update your backup, but this\n" -" option is not really useful because you need to\n" -" decompress your backup before you can update it.\n" -" \n" -" - the .backupignore mode:\n" -"\n" -" Like with cvs, Drakbackup will ignore all references\n" -" included in .backupignore files in each directories.\n" -" ex: \n" -" #> cat .backupignore\n" -" *.o\n" -" *~\n" -" ...\n" -" \n" -"\n" +msgid "Auto-detect printers connected to machines running Microsoft Windows" +msgstr "" + +#: ../../any.pm:1 +#, c-format +msgid "This password is too simple" +msgstr "Пароль занадто простий" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Slovakian (QWERTZ)" +msgstr "Словацька (QWERTZ)" + +#: ../../share/advertising/06-development.pl:1 +#, c-format +msgid "" +"To modify and to create in different languages such as Perl, Python, C and C+" +"+ has never been so easy thanks to GNU gcc 3 and the best Open Source " +"development environments." msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "Drakbackup" +msgid "Truly minimal install (especially no urpmi)" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "Restore" -msgstr "В╕дновити з файлу" +msgid "" +" Transfer \n" +"Now" +msgstr "Перенести" #: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "Backup Now" -msgstr "Установка файл. систем" +msgid "Use daemon" +msgstr "╤м'я користувача" -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Advanced Configuration" -msgstr "Конф╕╜урац╕я локально╖ мереж╕" +#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1 +#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1 +#, c-format +msgid "Authentication" +msgstr "Автентикац╕я" -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Wizard Configuration" -msgstr "Конф╕╜урац╕я" +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Add this printer to Star Office/OpenOffice.org/GIMP" +msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "View Backup Configuration." -msgstr "Конф╕гурац╕я мереж╕" +msgid "Additional CUPS servers: " +msgstr "IP адреса CUPS сервера" -#: ../../standalone/drakbackup:1 +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "" +"Choose one of the auto-detected printers from the list or enter the hostname " +"or IP and the optional port number (default is 9100) in the input fields." +msgstr "" + +#: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format -msgid "Backup Now from configuration file" -msgstr "Конф╕гурац╕я мереж╕" +msgid "Where do you want to mount %s?" +msgstr "Де ви хочете змонтувати пристр╕й %s?" #: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "Drakbackup Configuration" -msgstr "Конф╕гурац╕я мереж╕" +msgid "Restore Via Network" +msgstr "В╕дновити з файлу" -#: ../../standalone/drakbackup:1 +#: ../../lang.pm:1 #, c-format -msgid "Total Progress" -msgstr "" +msgid "Algeria" +msgstr "Алгер╕я" -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Sending files..." -msgstr "Записати в файл" +#: ../../any.pm:1 +#, c-format +msgid "Initrd-size" +msgstr "Розм╕р Initrd" -#: ../../standalone/drakbackup:1 +#: ../../help.pm:1 #, c-format -msgid "files sending by FTP" +msgid "" +"In the case that different servers are available for your card, with or\n" +"without 3D acceleration, you are then asked to choose the server that best\n" +"suits your needs." msgstr "" #: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Backup other files" -msgstr "Поганий резервний файл" +#, c-format +msgid "\tBackups use tar and gzip\n" +msgstr "" -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Backup user files" -msgstr "Поганий резервний файл" +#: ../../Xconfig/card.pm:1 +#, c-format +msgid "2 MB" +msgstr "2 Мб" -#: ../../standalone/drakbackup:1 +#: ../../standalone.pm:1 +#, c-format +msgid "" +"[OPTION]...\n" +" --no-confirmation don't ask first confirmation question in " +"MandrakeUpdate mode\n" +" --no-verify-rpm don't verify packages signatures\n" +" --changelog-first display changelog before filelist in the " +"description window\n" +" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" +msgstr "" + +#: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "Backup system files" -msgstr "Поганий резервний файл" +msgid "Setting Default Printer..." +msgstr "Стандартний принтер" -#: ../../standalone/drakbackup:1 +#: ../../standalone/drakgw:1 #, c-format -msgid "Under Devel ... please wait." -msgstr "" +msgid "Interface %s (using module %s)" +msgstr "╤нтерфейс %s (з використанням модуля %s)" -#: ../../standalone/drakbackup:1 +#: ../../install_steps_gtk.pm:1 +#, c-format +msgid "Name: %s\n" +msgstr "Назва: %s\n" + +#: ../../standalone/draksplash:1 +#, fuzzy, c-format +msgid "Generating preview ..." +msgstr "Визначаю пристро╖..." + +#: ../../network/network.pm:1 #, c-format msgid "" -"No configuration file found \n" -"please click Wizard or Advanced." +"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz " +"frequency), or add enough '0' (zeroes)." msgstr "" -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Please select data to backup..." -msgstr "Вибер╕ть, будь-ласка, мову." +#: ../../mouse.pm:1 +#, c-format +msgid "serial" +msgstr "посл╕довний" -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Please select media for backup..." -msgstr "Вибер╕ть, будь-ласка, мову." +#: ../../harddrake/data.pm:1 +#, c-format +msgid "DVD-ROM" +msgstr "" -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Please select data to restore..." -msgstr "Вибер╕ть, будь-ласка, мову." +#: ../../keyboard.pm:1 +#, c-format +msgid "Georgian (\"Latin\" layout)" +msgstr "Грузинська (латинська розкладка)" -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "The following packages need to be installed:\n" -msgstr "Ц╕ пакети будуть встановленими" +#: ../../share/advertising/09-mdksecure.pl:1 +#, c-format +msgid "Get the best items with Mandrake Linux Strategic partners" +msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../modules/interactive.pm:1 #, c-format msgid "" -"Error during sending file via FTP.\n" -" Please correct your FTP configuration." +"You may now provide options to module %s.\n" +"Note that any address should be entered with the prefix 0x like '0x123'" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../share/advertising/04-configuration.pl:1 #, c-format msgid "" -"Error during sendmail.\n" -" Your report mail was not sent.\n" -" Please configure sendmail" +"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful " +"tool to fully adapt your computer to the use you make of it. Configure and " +"customize elements such as the security level, the peripherals (screen, " +"mouse, keyboard...), the Internet connection and much more!" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../lang.pm:1 +#, c-format +msgid "Kenya" +msgstr "Кен╕я" + +#: ../../diskdrake/hd_gtk.pm:1 +#, c-format +msgid "Use ``Unmount'' first" +msgstr "Спочатку скористуйтеся ``Розмонтувати''" + +#: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "Next" -msgstr "Текст" +msgid "Installing mtools packages..." +msgstr "Установка пакету %s" -#: ../../standalone/drakbackup:1 +#: ../../any.pm:1 #, fuzzy, c-format -msgid "Previous" -msgstr "<- Попередн╕й" +msgid "You must specify a root partition" +msgstr "Ви повинн╕ мати п╕дрозд╕л для своп " -#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1 -#: ../../standalone/logdrake:1 +#: ../../standalone/draksplash:1 #, fuzzy, c-format -msgid "Save" -msgstr "Статус" +msgid "first step creation" +msgstr "створення завантажувального диску" -#: ../../standalone/drakbackup:1 +#: ../../keyboard.pm:1 +#, c-format +msgid "Both Shift keys simultaneously" +msgstr "" + +#: ../../standalone/scannerdrake:1 #, fuzzy, c-format -msgid "Build Backup" -msgstr "Поганий резервний файл" +msgid "Select a scanner model" +msgstr "Вибер╕ть граф╕чну плату" + +#: ../../printer/data.pm:1 +#, c-format +msgid "LPRng - LPR New Generation" +msgstr "LPRng - LPR New Generation (нове покол╕ння)" #: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "Restore Progress" -msgstr "В╕дновити з файлу" +msgid "Drakbackup Configuration" +msgstr "Конф╕гурац╕я мереж╕" -#: ../../standalone/drakbackup:1 +#: ../../standalone/logdrake:1 +#, c-format +msgid "Save as.." +msgstr "Зберегти як.." + +#: ../../standalone/drakconnect:1 +#, c-format +msgid "" +"This interface has not been configured yet.\n" +"Launch the configuration wizard in the main window" +msgstr "" + +#: ../../lang.pm:1 +#, c-format +msgid "Korea (North)" +msgstr "" + +#: ../../any.pm:1 +#, c-format +msgid "Autologin" +msgstr "Авторе╓страц╕я" + +#: ../../install_gtk.pm:1 #, fuzzy, c-format -msgid "Restore From Catalog" -msgstr "В╕дновити таблицю п╕дрозд╕л╕в" +msgid "System configuration" +msgstr "Конф╕гурац╕я ╕нтернету" -#: ../../standalone/drakbackup:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "Browse to new restore repository." +msgid "Domain Admin Password" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../share/advertising/05-desktop.pl:1 #, c-format -msgid "CD in place - continue." +msgid "" +"Perfectly adapt your computer to your needs thanks to the 11 available " +"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME " +"2.2, Window Maker, ..." msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "Custom Restore" -msgstr "Спец╕альний" +msgid "Configuring printer ..." +msgstr "Настроюю принтер \"%s\"..." -#: ../../standalone/drakbackup:1 +#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1 #, c-format -msgid "Restore all backups" +msgid "" +"To ensure data integrity after resizing the partition(s), \n" +"filesystem checks will be run on your next boot into Windows(TM)" msgstr "" -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Restore Failed..." -msgstr "В╕дновити з файлу" +#: ../../common.pm:1 +#, c-format +msgid "MB" +msgstr "Мб" -#: ../../standalone/drakbackup:1 +#: ../../security/help.pm:1 #, c-format -msgid "Files Restored..." +msgid "if set to yes, run some checks against the rpm database." msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../lang.pm:1 #, c-format -msgid "Path or Module required" +msgid "Virgin Islands (British)" +msgstr "В╕рг╕нськ╕ острови (Британ╕я)" + +#: ../../lang.pm:1 +#, c-format +msgid "Bermuda" +msgstr "Бермуди" + +#: ../../standalone/drakfont:1 +#, c-format +msgid "click here if you are sure." msgstr "" #: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Hostname required" -msgstr "╤м'я хоста:" +#, c-format +msgid "" +"No configuration file found \n" +"please click Wizard or Advanced." +msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../help.pm:1 #, fuzzy, c-format -msgid "Username required" -msgstr "╤м'я користувача" +msgid "" +"Listed here are the existing Linux partitions detected on your hard drive.\n" +"You can keep the choices made by the wizard, since they are good for most\n" +"common installations. If you make any changes, you must at least define a\n" +"root partition (\"/\"). Do not choose too small a partition or you will not\n" +"be able to install enough software. If you want to store your data on a\n" +"separate partition, you will also need to create a \"/home\" partition\n" +"(only possible if you have more than one Linux partition available).\n" +"\n" +"Each partition is listed as follows: \"Name\", \"Capacity\".\n" +"\n" +"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" +"\"partition number\" (for example, \"hda1\").\n" +"\n" +"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" +"\"sd\" if it is a SCSI hard drive.\n" +"\n" +"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"hard drives:\n" +"\n" +" * \"a\" means \"master hard drive on the primary IDE controller\";\n" +"\n" +" * \"b\" means \"slave hard drive on the primary IDE controller\";\n" +"\n" +" * \"c\" means \"master hard drive on the secondary IDE controller\";\n" +"\n" +" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" +"\n" +"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" +"\"second lowest SCSI ID\", etc." +msgstr "" +"Вище перел╕чен╕ вже ╕снуюч╕ п╕дрозд╕ли, знайден╕ на Вашому жорсткому\n" +"диску. Ви можете притримуватись конф╕╜урац╕╖, встановлено╖\n" +"пом╕чником. Ця конф╕╜урац╕я п╕дходить для б╕льшост╕ випадк╕в\n" +"використання системи. Якщо ви вир╕шите зм╕нити цю конф╕╜урац╕ю, як\n" +"м╕н╕мум Ви ма╓те визначити кореневу файлову систему (/). Не вид╕ляйте\n" +"для цього занадто малий п╕дрозд╕л, бо ╕накше ви не зможете встановити\n" +"все потр╕бне програмне забезпечення. Якщо ви бажа╓те зберегти вс╕ сво╖\n" +"дан╕ на окремому п╕дрозд╕л╕, Вам потр╕бно буде також вибрати п╕дрозд╕л\n" +"для \"/home\" (т╕льки в тому випадку, якщо ви ма╓те б╕льше одного\n" +"п╕дрозд╕ла для Л╕накса). \n" +"\n" +"Кожен п╕дрозд╕л поданий в такому вигляд╕: \"Назва\", \"Об'╓м\".\n" +"\n" +"Назва розшифрову╓ться так: \"тип жорсткого диску\", \"номер жорсткого\n" +"диску\", \"номер п╕дрозд╕лу на диску\", (Наприклад: \"hda1\").\n" +"\n" +"\"Тип жорсткого диску\" - це \"hd\", якщо ви ма╓те диск типу IDE, ╕ \"sd\",\n" +"якщо ви ма╓те жорсткий диск типу SCSI.\n" +"\n" +"\"Номер жорского диску\" - це завжди л╕тера п╕сля \"hd\" чи \"sd\". Для\n" +"диск╕в типу IDE це:\n" +"\n" +" * \"a\" - головний диск (master) на першому контролер╕ IDE,\n" +"\n" +" * \"b\" - вторинний (slave) диск на першому контролер╕ IDE,\n" +"\n" +" * \"c\" - головний диск на другому контролер╕ IDE,\n" +"\n" +" * \"d\" - вторинний диск на другому контролер╕ IDE.\n" +"\n" +"Для SCSI диск╕в \"a\" означа╓ \"головний диск\", \"b\" - другорядний диск, " +"╕\n" +"т.д. ..." -#: ../../standalone/drakbackup:1 +#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 #, fuzzy, c-format -msgid "Password required" -msgstr "Пароль" +msgid "Remove" +msgstr "Видалити принтер" -#: ../../standalone/drakbackup:1 +#: ../../lang.pm:1 #, c-format -msgid "Host Path or Module" +msgid "Lesotho" +msgstr "Лесото" + +#: ../../ugtk2.pm:1 +#, c-format +msgid "utopia 25" msgstr "" -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Host Name" -msgstr "Назва хоста" +#: ../../printer/main.pm:1 +#, c-format +msgid "Pipe job into a command" +msgstr "Перенаправити роботу по каналу в команду" -#: ../../standalone/drakbackup:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "Restore Via Network Protocol: %s" +msgid "new dynamic device name generated by core kernel devfs" msgstr "" +#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1 +#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1 +#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1 +#, c-format +msgid "Yes" +msgstr "Так" + +#: ../../lang.pm:1 +#, c-format +msgid "Cote d'Ivoire" +msgstr "Кои д'╤вуар" + +#: ../../network/isdn.pm:1 +#, c-format +msgid "Which protocol do you want to use?" +msgstr "Який протокол Ви хочете використовувати?" + #: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "Restore Via Network" +msgid "Restore Progress" msgstr "В╕дновити з файлу" -#: ../../standalone/drakbackup:1 +#: ../../lang.pm:1 #, c-format -msgid "Not the correct tape label. Tape is labelled %s." +msgid "Estonia" +msgstr "Естон╕я" + +#: ../../standalone/scannerdrake:1 +#, c-format +msgid "Choose the host on which the local scanners should be made available:" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../partition_table.pm:1 #, c-format msgid "" -"Insert the tape with volume label %s\n" -" in the tape drive device %s" +"You have a hole in your partition table but I can't use it.\n" +"The only solution is to move your primary partitions to have the hole next " +"to the extended partitions." msgstr "" +"У Вас ╓ пром╕жок в таблиц╕ розд╕л╕в, але я не можу ним скористуватися.\n" +"╢диним р╕шенням може бути пересунути Ваш╕ основн╕ п╕дрозд╕ли так, щоб\n" +"пром╕жок був поруч з розширеними п╕дрозд╕лами." -#: ../../standalone/drakbackup:1 +#: ../../standalone/harddrake2:1 #, fuzzy, c-format -msgid "Restore From Tape" -msgstr "В╕дновити таблицю п╕дрозд╕л╕в" +msgid "Channel" +msgstr "В╕дм╕нити" + +#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 +#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 +#, c-format +msgid "Add" +msgstr "Додати" + +#: ../../standalone/drakgw:1 +#, c-format +msgid "No Internet Connection Sharing has ever been configured." +msgstr "Сп╕льне користування з'╓днанням з ╕нтернетом сконф╕гуровано" #: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid " Error while sending mail. \n" +msgstr "Помилка при читанн╕ файла %s" + +#: ../../help.pm:1 ../../install_steps_interactive.pm:1 +#: ../../standalone/keyboarddrake:1 #, c-format -msgid "Not the correct CD label. Disk is labelled %s." -msgstr "" +msgid "Keyboard" +msgstr "Клав╕атура" #: ../../standalone/drakbackup:1 #, c-format @@ -13650,4274 +13172,4790 @@ msgid "" " in the CD drive under mount point /mnt/cdrom" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../network/network.pm:1 +#, c-format +msgid "" +"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add " +"enough '0' (zeroes)." +msgstr "" + +#: ../../network/netconnect.pm:1 +#, c-format +msgid "Choose the connection you want to configure" +msgstr "Вибер╕ть з'╓днання, яке Ви хочете настро╖ти" + +#: ../../standalone/draksec:1 #, fuzzy, c-format -msgid "Restore From CD" -msgstr "В╕дновити з дискети" +msgid "Please wait, setting security level..." +msgstr "Встановлення р╕вня безпеки" -#: ../../standalone/drakbackup:1 +#: ../../share/advertising/06-development.pl:1 #, c-format -msgid "Backup files not found at %s." +msgid "Mandrake Linux 9.1: the ultimate development platform" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../network/network.pm:1 +#, c-format +msgid "Configuring network device %s" +msgstr "Конф╕гурую пристр╕й мереж╕ %s" + +#: ../../install_steps_interactive.pm:1 #, fuzzy, c-format -msgid "" -"Change\n" -"Restore Path" -msgstr "В╕дновити з файлу" +msgid "activated" +msgstr "актив╕зувати зараз" -#: ../../standalone/drakbackup:1 +#: ../../standalone/drakpxe:1 #, fuzzy, c-format -msgid "" -"Restore Selected\n" -"Files" -msgstr "Видалити принтер" +msgid "Please choose which network interface will be used for the dhcp server." +msgstr "" +"Вибер╕ть яку плату мереж╕ Ви хочете використати для з'╓днання з\n" +"╤нтернетом" -#: ../../standalone/drakbackup:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "" -"Restore Selected\n" -"Catalog Entry" -msgstr "" +msgid "Finding packages to upgrade..." +msgstr "Шукаю пакети для поновлення" -#: ../../standalone/drakbackup:1 +#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #, c-format -msgid "Remove user directories before restore." -msgstr "" +msgid "Mount point: " +msgstr "Точка монтування: " -#: ../../standalone/drakbackup:1 +#: ../../standalone/drakfont:1 #, c-format -msgid "Do new backup before restore (only for incremental backups.)" +msgid "parse all fonts" msgstr "" -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "select path to restore (instead of /)" -msgstr "Який тип миш╕ ви ма╓те?" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Restore Other" -msgstr "В╕дновити з файлу" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Restore Users" -msgstr "В╕дновити з файлу" - -#: ../../standalone/drakbackup:1 +#: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, fuzzy, c-format -msgid "Restore system" -msgstr "Встановити систему" +msgid "With X" +msgstr "Чекайте" -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Other Media" -msgstr "╤нш╕" +#: ../../Xconfig/card.pm:1 +#, c-format +msgid "Multi-head configuration" +msgstr "Конф╕╜урац╕я з к╕лькома мон╕торами" -#: ../../standalone/drakbackup:1 +#: ../../standalone/drakbug:1 #, fuzzy, c-format -msgid "Select another media to restore from" -msgstr "Який тип миш╕ ви ма╓те?" +msgid "No browser available! Please install one" +msgstr "" +"Ви можете вибрати також ╕нш╕ мови, як╕ будуть доступн╕ в систем╕ п╕сля\n" +"установки" -#: ../../standalone/drakbackup:1 +#: ../../Xconfig/main.pm:1 #, c-format -msgid "Please enter the directory where backups are stored" +msgid "" +"Keep the changes?\n" +"The current configuration is:\n" +"\n" +"%s" msgstr "" +"Зберегти зм╕ни?\n" +"╤снуюча конф╕гурац╕я:\n" +"\n" +"%s" -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Restore from Hard Disk." -msgstr "В╕дновити з дискети" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Use quota for backup files." -msgstr "Поганий резервний файл" +#: ../../fsedit.pm:1 +#, c-format +msgid "You can't use ReiserFS for partitions smaller than 32MB" +msgstr "ReiserFS не можна користуватися на п╕дрозд╕лах розм╕ром менше 32Мб." -#: ../../standalone/drakbackup:1 +#: ../../services.pm:1 #, c-format msgid "" -"Please enter the maximum size\n" -" allowed for Drakbackup" +"The rwho protocol lets remote users get a list of all of the users\n" +"logged into a machine running the rwho daemon (similiar to finger)." msgstr "" +"Протокол rwho вида╓ користувачам на в╕ддалених системах ╕нформац╕ю про\n" +"вс╕х користувач╕в заре╓строваних в систем╕, яка ма╓ демон rwho\n" +"(под╕бний до демона finger)." -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Please enter the directory to save:" -msgstr "Випробуйте мишку, будь-ласка" +#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 +#, c-format +msgid "Domain name" +msgstr "Назва домену" -#: ../../standalone/drakbackup:1 +#: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "Use Hard Disk to backup" -msgstr "Поганий резервний файл" +msgid "Sharing of local printers" +msgstr "Локальний принтер" -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "please choose the date to restore" -msgstr "Який тип миш╕ ви ма╓те?" +#: ../../install_messages.pm:1 +#, c-format +msgid "http://www.mandrakelinux.com/en/91errata.php3" +msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "Backup the system files before:" -msgstr "Поганий резервний файл" +msgid "Available printers" +msgstr "Локальний принтер" -#: ../../standalone/drakbackup:1 +#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format -msgid "User list to restore (only the most recent date per user is important)" -msgstr "" +msgid "Empty" +msgstr "Пусто" -#: ../../standalone/drakbackup:1 +#: ../../help.pm:1 #, c-format -msgid "OK to restore the other files." +msgid "" +"X (for X Window System) is the heart of the GNU/Linux graphical interface\n" +"on which all the graphical environments (KDE, GNOME, AfterStep,\n" +"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n" +"\n" +"You will be presented with a list of different parameters to change to get\n" +"an optimal graphical display: Graphic Card\n" +"\n" +" The installer will normally automatically detect and configure the\n" +"graphic card installed on your machine. If it is not the case, you can\n" +"choose from this list the card you actually have installed.\n" +"\n" +" In the case that different servers are available for your card, with or\n" +"without 3D acceleration, you are then asked to choose the server that best\n" +"suits your needs.\n" +"\n" +"\n" +"\n" +"Monitor\n" +"\n" +" The installer will normally automatically detect and configure the\n" +"monitor connected to your machine. If it is correct, you can choose from\n" +"this list the monitor you actually have connected to your computer.\n" +"\n" +"\n" +"\n" +"Resolution\n" +"\n" +" Here you can choose the resolutions and color depths available for your\n" +"hardware. Choose the one that best suits your needs (you will be able to\n" +"change that after installation though). A sample of the chosen\n" +"configuration is shown in the monitor.\n" +"\n" +"\n" +"\n" +"Test\n" +"\n" +" the system will try to open a graphical screen at the desired\n" +"resolution. If you can see the message during the test and answer \"%s\",\n" +"then DrakX will proceed to the next step. If you cannot see the message, it\n" +"means that some part of the autodetected configuration was incorrect and\n" +"the test will automatically end after 12 seconds, bringing you back to the\n" +"menu. Change settings until you get a correct graphical display.\n" +"\n" +"\n" +"\n" +"Options\n" +"\n" +" Here you can choose whether you want to have your machine automatically\n" +"switch to a graphical interface at boot. Obviously, you want to check\n" +"\"%s\" if your machine is to act as a server, or if you were not successful\n" +"in getting the display configured." msgstr "" -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid " Restore Configuration " -msgstr "Конф╕гурац╕я мереж╕" - -#: ../../standalone/drakbackup:1 +#: ../../standalone/draksplash:1 #, c-format -msgid " Successfuly Restored on %s " +msgid "text width" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid " All of your selected data have been " -msgstr "" +msgid "Where do you want to mount device %s?" +msgstr "Де ви хочете змонтувати пристр╕й %s?" -#: ../../standalone/drakbackup:1 +#: ../../standalone/drakgw:1 #, c-format -msgid "Backup files are corrupted" +msgid "The default lease (in seconds)" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "Please uncheck or remove it on next time." -msgstr "Вибер╕ть до якого посл╕довного порта п╕дключений Ваш модем?" +msgid "Interface \"%s\"" +msgstr "╤нтерфейс %s" -#: ../../standalone/drakbackup:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "" -"List of data corrupted:\n" -"\n" +msgid "With basic documentation (recommended!)" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../mouse.pm:1 +#, c-format +msgid "1 button" +msgstr "Одно кнопочна" + +#: ../../printer/printerdrake.pm:1 #, c-format msgid "" -"List of data to restore:\n" "\n" +"There are %d unknown printers directly connected to your system" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../Xconfig/main.pm:1 #, c-format -msgid "No configuration, please click Wizard or Advanced.\n" +msgid "Test" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../security/help.pm:1 #, c-format -msgid "\t-Network by webdav.\n" +msgid "" +"Arguments: (arg)\n" +"\n" +"Allow/Forbid direct root login." msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "\t-Network by rsync.\n" -msgstr "" +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Korea" +msgstr "Ще" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "\t-Network by SSH.\n" -msgstr "" +#: ../../interactive/stdio.pm:1 +#, fuzzy, c-format +msgid "Your choice? (default `%s'%s) " +msgstr "Ваш виб╕р? (рекомендований %s) " -#: ../../standalone/drakbackup:1 +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Raw printer" +msgstr "Нема╓ принтера" + +#: ../../standalone/harddrake2:1 #, c-format -msgid "\t-Network by FTP.\n" +msgid "official vendor name of the cpu" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "Vendor" +msgstr "Назад" + +#: ../../standalone/drakgw:1 #, c-format -msgid "\t-Tape \n" -msgstr "" +msgid "Interface %s" +msgstr "╤нтерфейс %s" -#: ../../standalone/drakbackup:1 +#: ../../steps.pm:1 #, c-format -msgid "\t-CDROM.\n" -msgstr "" +msgid "Configure mouse" +msgstr "Сконф╕гуруйте мишу" -#: ../../standalone/drakbackup:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "\t-Hard drive.\n" -msgstr "" +msgid "Choose the mount points" +msgstr "Вибер╕ть точки монтування" -#: ../../standalone/drakbackup:1 +#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1 +#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1 +#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1 +#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1 +#: ../../standalone/net_monitor:1 #, c-format -msgid "" -"\n" -"- Daemon (%s) include:\n" -msgstr "" +msgid "OK" +msgstr "Гаразд" -#: ../../standalone/drakbackup:1 +#: ../../keyboard.pm:1 #, c-format -msgid "\tBackups use tar and gzip\n" -msgstr "" +msgid "Yugoslavian (latin)" +msgstr "Югославська (латинська)" -#: ../../standalone/drakbackup:1 +#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format -msgid "\tBackups use tar and bzip2\n" -msgstr "" +msgid "Installing" +msgstr "Встановлюю" -#: ../../standalone/drakbackup:1 +#: ../../any.pm:1 #, c-format -msgid "\tDo not include System Files\n" +msgid "Launch userdrake" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../install_steps_interactive.pm:1 #, fuzzy, c-format -msgid "" -"\n" -"- Options:\n" -msgstr "Параметри" +msgid "Is this an install or an upgrade?" +msgstr "Це установка чи поновлення?" -#: ../../standalone/drakbackup:1 +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "ISDN card" +msgstr "Внутр╕шня плата ISDN" + +#: ../../share/advertising/02-community.pl:1 #, c-format msgid "" -"\t\t user name: %s\n" -"\t\t on path: %s \n" +"To share your own knowledge and help build Linux software, join our " +"discussion forums on our \"Community\" webpages." msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../network/netconnect.pm:1 #, c-format msgid "" +"Congratulations, the network and Internet configuration is finished.\n" +"The configuration will now be applied to your system.\n" "\n" -"- Save via %s on host: %s\n" msgstr "" +"В╕та╓мо, конф╕╜урац╕я мереж╕ зак╕нчена.\n" +"\n" +"Тепер ця конф╕╜урац╕я буде застосована до вашо╖ системи.\n" #: ../../standalone/drakbackup:1 #, c-format -msgid "\t\tErase=%s" +msgid "\t-Hard drive.\n" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../help.pm:1 #, c-format msgid "" +"This step is activated only if an old GNU/Linux partition has been found on\n" +"your machine.\n" "\n" -"- Save to Tape on device: %s" +"DrakX now needs to know if you want to perform a new install or an upgrade\n" +"of an existing Mandrake Linux system:\n" +"\n" +" * \"%s\": For the most part, this completely wipes out the old system. If\n" +"you wish to change how your hard drives are partitioned, or change the file\n" +"system, you should use this option. However, depending on your partitioning\n" +"scheme, you can prevent some of your existing data from being over-written.\n" +"\n" +" * \"%s\": this installation class allows you to update the packages\n" +"currently installed on your Mandrake Linux system. Your current\n" +"partitioning scheme and user data is not altered. Most of other\n" +"configuration steps remain available, similar to a standard installation.\n" +"\n" +"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n" +"running version \"8.1\" or later. Performing an Upgrade on versions prior\n" +"to Mandrake Linux version \"8.1\" is not recommended." msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../printer/main.pm:1 #, c-format -msgid " (multi-session)" +msgid "Printer on remote CUPS server" +msgstr "Принтер на в╕ддаленому сервер╕ CUPS" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "" +"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP." msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../standalone/drakperm:1 #, fuzzy, c-format -msgid " on device: %s" -msgstr "Спец╕альний пристр╕й миш╕: %s\n" +msgid "delete" +msgstr "Стерти" -#: ../../standalone/drakbackup:1 +#: ../../standalone/drakfont:1 #, c-format -msgid "RW" +msgid "here if no." msgstr "" -#: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"\n" -"- Burn to CD" -msgstr "" +#: ../../network/network.pm:1 +#, fuzzy, c-format +msgid "DHCP host name" +msgstr "Назва хоста" -#: ../../standalone/drakbackup:1 +#: ../../standalone/drakgw:1 #, c-format -msgid "" -"\n" -"- Delete hard drive tar files after backup.\n" +msgid "The maximum lease (in seconds)" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1 #, c-format -msgid "" -"\n" -"- Save on Hard drive on path: %s\n" -msgstr "" +msgid "Please choose which serial port your mouse is connected to." +msgstr "Вибер╕ть до якого посл╕довного порту при╓днано мишу?" -#: ../../standalone/drakbackup:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "" -"\n" -"- Other Files:\n" -msgstr "" +msgid "Did it work properly?" +msgstr "Спрацювало нормально?" -#: ../../standalone/drakbackup:1 +#: ../../security/level.pm:1 #, c-format -msgid "" -"\n" -"- User Files:\n" -msgstr "" +msgid "Poor" +msgstr "Дуже низький" -#: ../../standalone/drakbackup:1 +#: ../../standalone/drakgw:1 #, c-format -msgid "" -"\n" -"- System Files:\n" +msgid "The DHCP start range" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../lang.pm:1 #, c-format -msgid "" -"\n" -"Backup Sources: \n" -msgstr "" +msgid "Grenada" +msgstr "╫ренада" -#: ../../standalone/drakbackup:1 +#: ../../any.pm:1 #, c-format -msgid "Select user manually" -msgstr "" +msgid "Unsafe" +msgstr "Небезпечно" -#: ../../standalone/drakbackup:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Backup Users" -msgstr "" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Backup system" -msgstr "Установка файл. систем" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Please choose what you want to backup" -msgstr "Вибер╕ть пакети, як╕ Ви хочете встановити" +msgid ", %s sectors" +msgstr ", %s сектор╕в" -#: ../../standalone/drakbackup:1 +#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1 +#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "on Tape Device" -msgstr "" +msgid "No" +msgstr "Н╕" -#: ../../standalone/drakbackup:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "on CDROM" +msgid "" +"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, " +"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP " +"PhotoSmart or an HP LaserJet 2200?" msgstr "" -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "across Network" -msgstr "Мережа:" +#: ../../lang.pm:1 +#, c-format +msgid "Guadeloupe" +msgstr "╫ваделупа" -#: ../../standalone/drakbackup:1 +#: ../../standalone/drakfont:1 #, c-format -msgid "on Hard Drive" +msgid "could not find any font.\n" msgstr "" -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Please choose where you want to backup" -msgstr "Вибер╕ть пакети, як╕ Ви хочете встановити" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "More Options" -msgstr "Опц╕╖ модуля:" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "When" -msgstr "Кол╕щатко" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Where" -msgstr "Кол╕щатко" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "What" -msgstr "Чекайте" +#: ../../standalone/keyboarddrake:1 +#, c-format +msgid "Do you want the BackSpace to return Delete in console?" +msgstr "Ви хочете щоб BackSpace давав Delete на консол╕?" -#: ../../standalone/drakbackup:1 +#: ../../Xconfig/monitor.pm:1 #, c-format -msgid "Delete Hard Drive tar files after backup to other media." -msgstr "" +msgid "Vertical refresh rate" +msgstr "Частота вертикально╖ розгортки" -#: ../../standalone/drakbackup:1 +#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1 #, c-format -msgid "Send mail report after each backup to:" -msgstr "" +msgid "Entering step `%s'\n" +msgstr "Почина╓ться крок `%s'\n" -#: ../../standalone/drakbackup:1 +#: ../../mouse.pm:1 #, c-format -msgid "" -"Please be sure that the cron daemon is included in your services. \n" -"\n" -"Note that currently all 'net' medias also use the hard drive." -msgstr "" +msgid "Logitech MouseMan" +msgstr "Logitech MouseMan" -#: ../../standalone/drakbackup:1 +#: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "" -"Please choose the\n" -"media for backup." -msgstr "Вибер╕ть, будь-ласка, мову." +msgid "Removing %s ..." +msgstr "Видалення LPD..." + +#: ../../lang.pm:1 +#, c-format +msgid "Niger" +msgstr "Н╕гер" -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "" -"Please choose the time \n" -"interval between each backup" -msgstr "Вибер╕ть пакети, як╕ Ви хочете встановити" +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "No printer" +msgstr "Нема╓ принтера" -#: ../../standalone/drakbackup:1 +#: ../../standalone/logdrake:1 #, fuzzy, c-format -msgid "Use daemon" -msgstr "╤м'я користувача" +msgid "alert configuration" +msgstr "Конф╕гурац╕я ╕нтернету" -#: ../../standalone/drakbackup:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "monthly" -msgstr "" +msgid "NetWare Printer Options" +msgstr "Опц╕╖ принтера NetWare" -#: ../../standalone/drakbackup:1 +#: ../../standalone/draksplash:1 #, c-format -msgid "weekly" +msgid "%s BootSplash (%s) preview" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../standalone/drakfloppy:1 #, c-format -msgid "daily" -msgstr "" +msgid "General" +msgstr "Загальн╕" -#: ../../standalone/drakbackup:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "hourly" -msgstr "" +msgid "Printing system: " +msgstr "Система друку: " -#: ../../standalone/drakbackup:1 +#: ../../steps.pm:1 #, c-format -msgid "HardDrive / NFS" -msgstr "" +msgid "Add a user" +msgstr "Додати користувача" -#: ../../standalone/drakbackup:1 +#: ../../standalone/drakconnect:1 #, c-format -msgid "CDROM / DVDROM" +msgid "Network configuration (%d adapters)" +msgstr "Конф╕гурац╕я мереж╕ (%d плат)" + +#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1 +#, c-format +msgid "Mandatory package %s is missing" msgstr "" -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Please enter the directory to save to:" -msgstr "Випробуйте мишку, будь-ласка" +#: ../../lang.pm:1 +#, c-format +msgid "Philippines" +msgstr "Ф╕л╕п╕ни" -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Please check if you want to eject your tape after the backup." -msgstr "Вибер╕ть пакети, як╕ Ви хочете встановити" +#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1 +#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1 +#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1 +#: ../../standalone/drakbackup:1 ../../standalone/draksec:1 +#, c-format +msgid "Ok" +msgstr "Гаразд" -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Please check if you want to erase your tape before the backup." -msgstr "Вибер╕ть пакети, як╕ Ви хочете встановити" +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Print Queue Name" +msgstr "Назва принтера" -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Please check if you want to use the non-rewinding device." -msgstr "Вибер╕ть пакети, як╕ Ви хочете встановити" +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Do you want to use aboot?" +msgstr "Чи Ви хочете використовувати aboot?" -#: ../../standalone/drakbackup:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Please enter the device name to use for backup" -msgstr "" +msgid "Belarusian" +msgstr "Б╕лоруська" -#: ../../standalone/drakbackup:1 +#: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "Use tape to backup" -msgstr "Поганий резервний файл" +msgid "" +"PDQ only supports local printers, remote LPD printers, and Socket/TCP " +"printers.\n" +msgstr "" +"PDQ п╕дтриму╓ т╕льки локальн╕ принтери, в╕ддален╕ принтери LDP ╕\n" +"принтери, що працюють через Socket/TCP.\n" -#: ../../standalone/drakbackup:1 +#: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format -msgid "No CD device defined!" -msgstr "Вибер╕ть файл" +msgid "Move files to the new partition" +msgstr "Недостатньо в╕льного простору для нових п╕дрозд╕л╕в" -#: ../../standalone/drakbackup:1 +#: ../../printer/printerdrake.pm:1 #, c-format msgid "" -"Please enter your CD Writer device name\n" -" ex: 0,1,0" +"Add here the CUPS servers whose printers you want to use. You only need to " +"do this if the servers do not broadcast their printer information into the " +"local network." msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "Please check if you are using a DVDRAM device" -msgstr "Клацн╕ть, будь-ласка, на п╕дрозд╕л╕" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Please check if you are using a DVDR device" -msgstr "Клацн╕ть, будь-ласка, на п╕дрозд╕л╕" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid " Erase Now " -msgstr "Перенести" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Please check if you want to erase your RW media (1st Session)" -msgstr "Клацн╕ть, будь-ласка, на п╕дрозд╕л╕" +msgid "Restore From Catalog" +msgstr "В╕дновити таблицю п╕дрозд╕л╕в" -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Please check if you are using CDRW media" -msgstr "Клацн╕ть, будь-ласка, на п╕дрозд╕л╕" +#: ../../lang.pm:1 +#, c-format +msgid "Pitcairn" +msgstr "П╕ткарн" -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Please check for multisession CD" -msgstr "Клацн╕ть, будь-ласка, на п╕дрозд╕л╕" +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "IDE" +msgstr "IDE" -#: ../../standalone/drakbackup:1 +#: ../../standalone/drakperm:1 #, fuzzy, c-format -msgid "Please choose your CD/DVD media size (Mb)" -msgstr "Яка у Вас розкладка клав╕атури?" +msgid "group :" +msgstr "Робоча група" -#: ../../standalone/drakbackup:1 +#: ../../fs.pm:1 #, c-format -msgid "" -"Please choose your CD/DVD device\n" -"(Press Enter to propogate settings to other fields.\n" -"This field isn't necessary, only a tool to fill in the form.)" +msgid "mounting partition %s in directory %s failed" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../standalone/drakboot:1 #, c-format -msgid "Use CD/DVDROM to backup" +msgid "Lilo screen" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../bootloader.pm:1 ../../help.pm:1 #, c-format -msgid "Need hostname, username and password!" -msgstr "" +msgid "LILO with graphical menu" +msgstr "LILO з граф╕чним меню" -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Remember this password" -msgstr "ще раз пароль" +#: ../../install_steps_gtk.pm:1 +#, c-format +msgid "Estimating" +msgstr "Наближене обчислення" -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Please enter your password" -msgstr "Будь-ласка, спробуйте ще раз" +#: ../../install_steps_gtk.pm:1 +#, c-format +msgid "You can't unselect this package. It is already installed" +msgstr "Виб╕р цього пакету неможливо в╕дм╕нити. Його вже встановлено." -#: ../../standalone/drakbackup:1 +#: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "Please enter your login" -msgstr "Будь-ласка, спробуйте ще раз" +msgid ", printer \"%s\" on SMB/Windows server \"%s\"" +msgstr "Принтер на сервер╕ SMB/Windows 95/98/NT " -#: ../../standalone/drakbackup:1 +#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format -msgid "" -"Please enter the directory (or module) to\n" -" put the backup on this host." -msgstr "" +msgid "Go on anyway?" +msgstr "Все-таки продовжувати?" -#: ../../standalone/drakbackup:1 +#: ../../install_steps_interactive.pm:1 #, fuzzy, c-format -msgid "Please enter the host name or IP." -msgstr "Випробуйте мишку, будь-ласка" +msgid "Looking for available packages and rebuilding rpm database..." +msgstr "Шукаю наявн╕ пакети" #: ../../standalone/drakbackup:1 #, c-format -msgid "" -"Other (not drakbackup)\n" -"keys in place already" +msgid "Does not appear to be recordable media!" msgstr "" -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "" -" Transfer \n" -"Now" -msgstr "Перенести" +#: ../../modules/interactive.pm:1 +#, c-format +msgid "Specify options" +msgstr "Вкаж╕ть опц╕╖" -#: ../../standalone/drakbackup:1 +#: ../../lang.pm:1 #, c-format -msgid "" -"Create/Transfer\n" -"backup keys for SSH" -msgstr "" +msgid "Vanuatu" +msgstr "Вануату" -#: ../../standalone/drakbackup:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Use Expect for SSH" -msgstr "" +msgid "Either the server name or the server's IP must be given!" +msgstr "Мають бути вказаними або назва сервера, або його IP адреса!" -#: ../../standalone/drakbackup:1 +#: ../../any.pm:1 #, c-format -msgid "Net Method:" +msgid "" +"A custom bootdisk provides a way of booting into your Linux system without\n" +"depending on the normal bootloader. This is useful if you don't want to " +"install\n" +"SILO on your system, or another operating system removes SILO, or SILO " +"doesn't\n" +"work with your hardware configuration. A custom bootdisk can also be used " +"with\n" +"the Mandrake rescue image, making it much easier to recover from severe " +"system\n" +"failures.\n" +"\n" +"If you want to create a bootdisk for your system, insert a floppy in the " +"first\n" +"drive and press \"Ok\"." msgstr "" +"Спец╕ально створений диск для завантаження забезпечить Вам можлив╕сть\n" +"запуску системи незалежно в╕д звичайного завантажувача. Це може\n" +"знадобитися у тих випадках, коли Ви не бажа╓те встановлювати SILO в\n" +"сво╖й систем╕, або коли ╕нша операц╕йна система \"перетира╓\" SILO, або\n" +"коли SILO не працю╓ з новою конф╕гурац╕╓ю апаратних засоб╕в. Авар╕йний\n" +"диск може також використовуватися разом з Mandrake авар╕йним диском,\n" +"що робить в╕дновлення в╕д серйозних системних крах╕в набагато\n" +"прост╕шим. \n" +"\n" +"Якщо Ви бажа╓те створити авар╕йний диск для сво╓╖ системи вставте\n" +"дискету в перший дисков╕д ╕ натисн╕ть \"Гаразд\"." -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Use network connection to backup" -msgstr "Поганий резервний файл" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Users" -msgstr "╤м'я користувача" - -#: ../../standalone/drakbackup:1 +#: ../../fsedit.pm:1 #, fuzzy, c-format -msgid "Windows (FAT32)" -msgstr "Стерти Windows(TM)" +msgid "You can't use an encrypted file system for mount point %s" +msgstr "Для точки монтування %s не можна користуватися лог╕чним томом LVM" -#: ../../standalone/drakbackup:1 +#: ../../lang.pm:1 #, c-format -msgid "Use Incremental Backups (do not replace old backups)" -msgstr "" +msgid "Norfolk Island" +msgstr "Норфолкськ╕ острови" -#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 +#: ../../standalone/drakboot:1 #, fuzzy, c-format -msgid "Remove Selected" -msgstr "Видалити принтер" +msgid "Theme installation failed!" +msgstr "Вибер╕ть тип установки" -#: ../../standalone/drakbackup:1 +#: ../../fsedit.pm:1 #, c-format -msgid "Do not include the browser cache" +msgid "Nothing to do" msgstr "" -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Please check all users that you want to include in your backup." -msgstr "Вибер╕ть пакети, як╕ Ви хочете встановити" - -#: ../../standalone/drakbackup:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "" -"With this option you will be able to restore any version\n" -" of your /etc directory." -msgstr "" +msgid "Use for loopback" +msgstr "Використовувати для зворотнього монтування" -#: ../../standalone/drakbackup:1 +#: ../../standalone/drakbug:1 #, c-format -msgid "Do not include critical files (passwd, group, fstab)" +msgid "Mandrake Bug Report Tool" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../network/adsl.pm:1 #, c-format -msgid "Use incremental backup (do not replace old backups)" -msgstr "" +msgid "use pppoe" +msgstr "вживати pppoe" -#: ../../standalone/drakbackup:1 +#: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format -msgid "Backup your System files. (/etc directory)" -msgstr "Поганий резервний файл" +msgid "Moving files to the new partition" +msgstr "Недостатньо в╕льного простору для нових п╕дрозд╕л╕в" -#: ../../standalone/drakbackup:1 +#: ../../Xconfig/card.pm:1 #, c-format -msgid "" -"These options can backup and restore all files in your /etc directory.\n" +msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration" msgstr "" +"XFree %s з ЕКСПЕРИМЕНТАЛЬНОЮ п╕дтримкою апаратного прискорення трьохвим╕рно╖ " +"граф╕ки" -#: ../../standalone/drakbackup:1 +#: ../../help.pm:1 ../../interactive.pm:1 #, c-format -msgid "" -"\n" -"Please check all options that you need.\n" -msgstr "" +msgid "Advanced" +msgstr "Досв╕дчений" -#: ../../standalone/drakbackup:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Select the files or directories and click on 'Add'" -msgstr "" +msgid "Transfer" +msgstr "Перенести" -#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 +#: ../../keyboard.pm:1 #, fuzzy, c-format -msgid "File Selection" -msgstr "Виб╕р пакет╕в" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "Can't create catalog!" -msgstr "" +msgid "Dvorak (Swedish)" +msgstr "Дворака (США)" #: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid " Error while sending mail. \n" -msgstr "Помилка при читанн╕ файла %s" +msgid "More Options" +msgstr "Опц╕╖ модуля:" -#: ../../standalone/drakbackup:1 +#: ../../lang.pm:1 #, c-format -msgid "" -"\n" -"Drakbackup activities via tape:\n" -"\n" -msgstr "" +msgid "Afghanistan" +msgstr "Афган╕стан" #: ../../standalone/drakbackup:1 #, c-format -msgid "" -"\n" -"Drakbackup activities via CD:\n" -"\n" +msgid "Delete Hard Drive tar files after backup to other media." msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../services.pm:1 #, c-format msgid "" -"\n" -"Drakbackup activities via %s:\n" -"\n" +"cron is a standard UNIX program that runs user-specified programs\n" +"at periodic scheduled times. vixie cron adds a number of features to the " +"basic\n" +"UNIX cron, including better security and more powerful configuration options." msgstr "" +"cron - це стандартна програма UNIX, яка викону╓ вибран╕ користувачем\n" +"програми пер╕одично у вибраний час. vixie cron дода╓ до стандартного\n" +"UNIX cron к╕лька нових можливостей, включаючи п╕двищену безпеку та\n" +"б╕льш потужн╕ конф╕гурац╕йн╕ опц╕╖." -#: ../../standalone/drakbackup:1 +#: ../../lang.pm:1 #, c-format -msgid "" -"\n" -" FTP connection problem: It was not possible to send your backup files by " -"FTP.\n" -msgstr "" +msgid "Burundi" +msgstr "Бурунд╕" -#: ../../standalone/drakbackup:1 +#: ../../standalone/drakTermServ:1 #, c-format -msgid "" -"file list sent by FTP: %s\n" -" " +msgid "Add Client -->" msgstr "" -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "No changes to backup!" -msgstr "Поганий резервний файл" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Hard Disk Backup files..." -msgstr "Поганий резервний файл" - -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Backup Other files..." -msgstr "Поганий резервний файл" +#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Read carefully!" +msgstr "Читайте уважно!" #: ../../standalone/drakbackup:1 #, c-format -msgid "Hard Disk Backup Progress..." +msgid "RW" msgstr "" -#: ../../standalone/drakbackup:1 -#, fuzzy, c-format -msgid "Backup User files..." -msgstr "Поганий резервний файл" - -#: ../../standalone/drakbackup:1 +#: ../../standalone/drakxtv:1 #, c-format -msgid "Backup system files..." +msgid "" +"Please,\n" +"type in your tv norm and country" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1 #, c-format -msgid "No tape in %s!" -msgstr "" +msgid "Port" +msgstr "Порт" -#: ../../standalone/drakbackup:1 +#: ../../standalone/drakgw:1 #, c-format -msgid "Permission problem accessing CD." +msgid "No (experts only)" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../standalone/drakTermServ:1 #, c-format -msgid "This may take a moment to erase the media." +msgid "No kernel selected!" msgstr "" -#: ../../standalone/drakbackup:1 +# NOTE: this message will be displayed by grub at boot time; that is +# using the BIOS font; that means cp437 charset on 99.99% of PC computers +# out there. It is then suggested that for non latin languages an ascii +# transliteration be used; or maybe the english text be used; as it is best +# +# The lines must fit on screen, aka length < 80 +# and only one line per string for the GRUB messages +# +#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) +#. -PO: and keep them smaller than 79 chars long +#: ../../bootloader.pm:1 #, c-format -msgid "Not erasable media!" +msgid "Press enter to boot the selected OS, 'e' to edit the" msgstr "" +"Natysnit' enter shchob zavantazhyty vibranu systemu, 'e' shchob redaguvaty" -#: ../../standalone/drakbackup:1 +#: ../../standalone/drakperm:1 #, c-format -msgid "Does not appear to be recordable media!" +msgid "Set-GID" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "The encryption keys do not match" +msgstr "Парол╕ р╕зн╕" + +#: ../../keyboard.pm:1 #, c-format -msgid "No CDR/DVDR in drive!" +msgid "Right \"Windows\" key" msgstr "" #: ../../standalone/drakbackup:1 #, c-format -msgid "WebDAV transfer failed!" +msgid "CDROM / DVDROM" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../security/help.pm:1 #, c-format -msgid "WebDAV remote site already in sync!" +msgid "if set to yes, check empty password in /etc/shadow." msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../help.pm:1 #, fuzzy, c-format -msgid "Total progess" -msgstr "Тестую стор╕нки" +msgid "" +"Before continuing, you should carefully read the terms of the license. It\n" +"covers the entire Mandrake Linux distribution. If you do agree with all the\n" +"terms in it, check the \"%s\" box. If not, simply turn off your computer." +msgstr "" +"Перш, н╕ж ╕ти дал╕, Ви ма╓те прочитати уважно умови л╕ценз╕╖. Вона\n" +"стосу╓ться всього диструбутиву Мандрейк Л╕накс, ╕, якщо Ви не\n" +"погоджу╓тесь з умовами л╕ценз╕╖, натисн╕ть кнопку В╕дмовитись. Це того\n" +"ж часу в╕дм╕нить установку системи. Для продовження установки\n" +"натисн╕ть кнопку Погодитись." -#: ../../standalone/drakbackup:1 +#: ../../printer/printerdrake.pm:1 #, c-format msgid "" -"Transfer successful\n" -"You may want to verify you can login to the server with:\n" +"Here is a list of the available printing options for the current printer:\n" "\n" -"ssh -i %s %s\\@%s\n" +msgstr "" + +#: ../../Xconfig/resolution_and_depth.pm:1 +#, c-format +msgid "Resolutions" +msgstr "Розд╕льн╕ здатност╕" + +#: ../../network/drakfirewall.pm:1 +#, fuzzy, c-format +msgid "" +"drakfirewall configurator\n" "\n" -"without being prompted for a password." +"This configures a personal firewall for this Mandrake Linux machine.\n" +"For a powerful and dedicated firewall solution, please look to the\n" +"specialized MandrakeSecurity Firewall distribution." msgstr "" +"Манюс╕нький брандмауер\n" +"\n" +"Ц╕ установки конф╕╜урують персональний брандмауер (a.k.a. firewall) на\n" +"дан╕й машин╕ з Л╕накс Мандрейк. Для того, щоб встановити серйозний\n" +"потужний брандмауер, зверн╕ться, будь ласка, до спец╕ал╕зованого\n" +"дистрибутива MandrakeSecurity Firewall." -#: ../../standalone/drakbackup:1 +#: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format -msgid "%s not responding" +msgid "" +"Please enter your username, password and domain name to access this host." msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../standalone/scannerdrake:1 #, fuzzy, c-format -msgid "Can't find %s on %s" -msgstr "Не можу в╕дкрити %s: %s\n" +msgid "Remove selected host" +msgstr "Видалити принтер" -#: ../../standalone/drakbackup:1 +#: ../../network/netconnect.pm:1 #, c-format -msgid "Permission denied transferring %s to %s" -msgstr "" +msgid "Network configuration" +msgstr "Конф╕гурац╕я мереж╕" -#: ../../standalone/drakbackup:1 +#: ../../any.pm:1 #, fuzzy, c-format -msgid "Bad password on %s" -msgstr "Без паролю" +msgid "No sharing" +msgstr "Старту╓ CUPS" -#: ../../standalone/drakbackup:1 +#: ../../standalone/drakperm:1 #, c-format -msgid "No password prompt on %s at port %s" +msgid "Move selected rule down one level" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../common.pm:1 #, c-format -msgid "ERROR: Cannot spawn %s." -msgstr "" +msgid "TB" +msgstr "Тб" #: ../../standalone/drakbackup:1 -#, c-format -msgid "This may take a moment to generate the keys." -msgstr "" +#, fuzzy, c-format +msgid "Please check if you are using a DVDR device" +msgstr "Клацн╕ть, будь-ласка, на п╕дрозд╕л╕" #: ../../standalone/drakbackup:1 -#, c-format -msgid "" -"%s exists, delete?\n" -"\n" -"Warning: If you've already done this process you'll probably\n" -" need to purge the entry from authorized_keys on the server." -msgstr "" +#, fuzzy, c-format +msgid "FATAL" +msgstr "FAT" -#: ../../standalone/drakbackup:1 +#: ../../standalone/drakpxe:1 #, c-format msgid "" +"The DHCP server will allow other computer to boot using PXE in the given " +"range of address.\n" "\n" -" DrakBackup Report Details\n" -"\n" +"The network address is %s using a netmask of %s.\n" "\n" msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Delete" +msgstr "Стерти" + +#: ../../security/help.pm:1 #, c-format msgid "" +"Arguments: (arg)\n" "\n" -" DrakBackup Daemon Report\n" -"\n" -"\n" +"Allow/Forbid reboot by the console user." msgstr "" -#: ../../standalone/drakbackup:1 +#: ../../Xconfig/various.pm:1 #, c-format msgid "" -"\n" -" DrakBackup Report \n" -"\n" +"I can setup your computer to automatically start the graphical interface " +"(XFree) upon booting.\n" +"Would you like XFree to start when you reboot?" msgstr "" +"Я можу настро╖ти Вашу систему так, що X буде стартувати автоматично\n" +"п╕сля завантаження системи.\n" +"Чи ви хочете, щоб X стартував автоматично?" -#: ../../standalone/drakbackup:1 +#: ../../standalone/drakfloppy:1 #, c-format -msgid "INFO" -msgstr "" +msgid "Build the disk" +msgstr "Побудувати диск" -#: ../../standalone/drakbackup:1 +#: ../../standalone/net_monitor:1 #, fuzzy, c-format -msgid "FATAL" -msgstr "FAT" - -#: ../../standalone/drakbackup:1 -#, c-format -msgid "WARNING" -msgstr "" +msgid "Disconnect %s" +msgstr "В╕д'╓днатись" -#: ../../standalone/drakbackup:1 +#: ../../standalone/drakconnect:1 #, c-format -msgid "Cron not available yet as non-root" -msgstr "" +msgid "Status:" +msgstr "Статус:" -#: ../../standalone/drakboot:1 +#: ../../network/network.pm:1 #, c-format -msgid "Installation of %s failed. The following error occured:" -msgstr "Установка %s неусп╕шна. Сталася помилка:" +msgid "HTTP proxy" +msgstr "Прокс╕ HTTP" -#: ../../standalone/drakboot:1 -#, c-format -msgid "No, I don't want autologin" -msgstr "Н╕, мен╕ не потр╕бна автоматична ре╓страц╕я" +#: ../../standalone/logdrake:1 +#, fuzzy, c-format +msgid "SSH Server" +msgstr "Сервер NIS" -#: ../../standalone/drakboot:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Yes, I want autologin with this (user, desktop)" +msgid "\t-Network by rsync.\n" msgstr "" -"Так, я хочу автоматично ре╓струватися в систем╕ з цим (╕менем, середовищем)" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "Launch the graphical environment when your system starts" -msgstr "Запускати в╕кно X-Window при завантаженн╕" -#: ../../standalone/drakboot:1 -#, c-format -msgid "System mode" -msgstr "Системний режим" +#: ../../network/isdn.pm:1 +#, fuzzy, c-format +msgid "European protocol" +msgstr "╢вропейський протокол" -#: ../../standalone/drakboot:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Bootsplash" +msgid ", printer \"%s\" on server \"%s\"" msgstr "" -#: ../../standalone/drakboot:1 +#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1 +#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1 +#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 +#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1 +#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 +#: ../../standalone/drakfont:1 ../../standalone/draksplash:1 #, c-format -msgid "Lilo screen" -msgstr "" +msgid "Error" +msgstr "Помилка" -#: ../../standalone/drakboot:1 +#: ../../any.pm:1 #, c-format -msgid "" -"\n" -"Select the theme for\n" -"lilo and bootsplash,\n" -"you can choose\n" -"them separately" +msgid "allow \"su\"" msgstr "" -#: ../../standalone/drakboot:1 -#, c-format -msgid "Themes" -msgstr "Теми" - -#: ../../standalone/drakboot:1 +#: ../../lang.pm:1 ../../standalone/drakxtv:1 #, fuzzy, c-format -msgid "Splash selection" -msgstr "Зберегти виб╕р пакет╕в" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "" -"You are currently using %s as your boot manager.\n" -"Click on Configure to launch the setup wizard." -msgstr "" -"ви користу╓тесь завантажувачем систем %s.\n" -"Клацн╕ть на \"Настро╖ти\" щоб стартувати пом╕чник установки." +msgid "Australia" +msgstr "посл╕довний" -#: ../../standalone/drakboot:1 +#: ../../standalone/drakfont:1 #, c-format -msgid "LiLo and Bootsplash themes installation successfull" +msgid "please wait during ttmkfdir..." msgstr "" -#: ../../standalone/drakboot:1 +#: ../../Xconfig/card.pm:1 #, fuzzy, c-format -msgid "Theme installation failed!" -msgstr "Вибер╕ть тип установки" +msgid "Configure only card \"%s\"%s" +msgstr "Настро╖ти т╕льки плату \"%s\" (%s)" -#: ../../standalone/drakboot:1 ../../standalone/draksplash:1 +#: ../../standalone/harddrake2:1 #, fuzzy, c-format -msgid "Notice" -msgstr "БезВ╕део" +msgid "Level" +msgstr "р╕вень" -#: ../../standalone/drakboot:1 -#, c-format -msgid "Relaunch 'lilo'" -msgstr "" +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Change the printing system" +msgstr "Настро╖ти мережу" -#: ../../standalone/drakboot:1 -#, c-format +#: ../../Xconfig/card.pm:1 +#, fuzzy, c-format msgid "" -"Can't relaunch LiLo!\n" -"Launch \"lilo\" as root in command line to complete LiLo theme installation." -msgstr "" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'." +"Your system supports multiple head configuration.\n" +"What do you want to do?" msgstr "" +"Ваша система може працювати з к╕лькома мон╕торами.\n" +"Що ви хочете настро╖ти?" -#: ../../standalone/drakboot:1 +#: ../../steps.pm:1 #, c-format -msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s." -msgstr "" +msgid "Configure services" +msgstr "Настро╖ти серв╕си" -#: ../../standalone/drakboot:1 +#: ../../standalone/drakTermServ:1 #, c-format -msgid "" -"Can't write /etc/sysconfig/bootsplash\n" -"File not found." +msgid "Broadcast Address:" msgstr "" -#: ../../standalone/drakboot:1 -#, fuzzy, c-format -msgid "Write %s" -msgstr "XFree86 %s" - -#: ../../standalone/drakboot:1 +#: ../../partition_table.pm:1 #, c-format -msgid "Can't write /etc/sysconfig/bootsplash." -msgstr "" +msgid "mount failed: " +msgstr "помилка монтування: " -#: ../../standalone/drakboot:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "Lilo message not found" +msgid "" +"the GNU/Linux kernel needs to run a calculation loop at boot time to " +"initialize a timer counter. Its result is stored as bogomips as a way to " +"\"benchmark\" the cpu." msgstr "" -#: ../../standalone/drakboot:1 +#: ../../any.pm:1 #, c-format -msgid "Copy %s to %s" -msgstr "" +msgid "Image" +msgstr "Образ" -#: ../../standalone/drakboot:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Backup %s to %s.old" +msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP." msgstr "" -#: ../../standalone/drakboot:1 +#: ../../services.pm:1 #, fuzzy, c-format -msgid "Create new theme" -msgstr "Створити новий розд╕л" +msgid "Remote Administration" +msgstr "Опц╕╖ в╕ддаленого принтера" -#: ../../standalone/drakboot:1 +#: ../../modules.pm:1 #, c-format msgid "" -"Display theme\n" -"under console" +"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel." msgstr "" -#: ../../standalone/drakboot:1 +#: ../../standalone/drakfont:1 #, fuzzy, c-format -msgid "Install themes" -msgstr "Встановити систему" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "Lilo/grub mode" -msgstr "Режим Lilo/grub" - -#: ../../standalone/drakboot:1 -#, c-format -msgid "Yaboot mode" -msgstr "Режим Yaboot" +msgid "Selected All" +msgstr "Вибер╕ть файл" -#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 -#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 +#: ../../printer/data.pm:1 #, c-format -msgid "Q" -msgstr "Q" +msgid "CUPS - Common Unix Printing System" +msgstr "CUPS - Common Unix Printing System (Сп╕льна система друку для Юн╕кс)" -#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 #: ../../standalone/logdrake:1 -#, c-format -msgid "/File/_Quit" -msgstr "/Файл/В_их╕д" +#, fuzzy, c-format +msgid "Webmin Service" +msgstr "Сервер" -#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 -#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 +#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1 #, c-format -msgid "/_File" -msgstr "/Файл" +msgid "device" +msgstr "пристр╕й" -#: ../../standalone/drakboot:1 +#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1 #, c-format -msgid "Boot Style Configuration" -msgstr "Конф╕╜урац╕я стилю установки" - -#: ../../standalone/drakbug:1 -#, fuzzy, c-format -msgid "No browser available! Please install one" -msgstr "" -"Ви можете вибрати також ╕нш╕ мови, як╕ будуть доступн╕ в систем╕ п╕сля\n" -"установки" +msgid "All" +msgstr "Все" -#: ../../standalone/drakbug:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "connecting to Bugzilla wizard ..." -msgstr "" - -#: ../../standalone/drakbug:1 -#, fuzzy, c-format -msgid "Package not installed" -msgstr "Вийти з установки" - -#: ../../standalone/drakbug:1 -#, fuzzy, c-format -msgid "Not installed" -msgstr "Вийти з установки" +msgid "Which printing system (spooler) do you want to use?" +msgstr "Яку чергу друку (систему) Ви хочете вживати?" -#: ../../standalone/drakbug:1 +#: ../../crypto.pm:1 ../../lang.pm:1 #, fuzzy, c-format -msgid "Standalone Tools" -msgstr "Засоби для консол╕" +msgid "Greece" +msgstr "Грецька" -#: ../../standalone/drakbug:1 -#, fuzzy, c-format -msgid "Report" -msgstr "порт" +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "An error occurred" +msgstr "Сталася помилка" -#: ../../standalone/drakbug:1 +#: ../../install_steps_gtk.pm:1 #, c-format msgid "" -"\n" -"\n" -"To submit a bug report, click on the button report.\n" -"This will open a web browser window on https://drakbug.mandrakesoft.com\n" -" where you'll find a form to fill in.The information displayed above will " -"be \n" -"transferred to that server\n" -"\n" +"This package must be upgraded.\n" +"Are you sure you want to deselect it?" msgstr "" +"Цей пакет повинен бути поновлений\n" +"Ви справд╕ хочете в╕дм╕нити його виб╕р?" -#: ../../standalone/drakbug:1 +#: ../../keyboard.pm:1 #, fuzzy, c-format -msgid "Release: " -msgstr "Зачекайте, будь-ласка" +msgid "Tamil (Typewriter-layout)" +msgstr "В╕рменська (друкарська машинка)" -#: ../../standalone/drakbug:1 +#: ../../standalone/drakautoinst:1 #, c-format -msgid "Kernel:" +msgid "manual" msgstr "" -#: ../../standalone/drakbug:1 -#, fuzzy, c-format -msgid "Package: " -msgstr "Виб╕р пакет╕в" - -#: ../../standalone/drakbug:1 -#, fuzzy, c-format -msgid "Application:" -msgstr "Автентикац╕я" - -#: ../../standalone/drakbug:1 -#, fuzzy, c-format -msgid "Configuration Wizards" -msgstr "Пом╕чник конф╕гурац╕╖ мереж╕" +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Printer manufacturer, model, driver" +msgstr "Виробник принтера, модель, драйвер" -#: ../../standalone/drakbug:1 +#: ../../standalone/drakfloppy:1 #, fuzzy, c-format -msgid "Userdrake" -msgstr "Друкарка" +msgid "" +"There is no medium or it is write-protected for device %s.\n" +"Please insert one." +msgstr "" +"Нема╓ нос╕я в пристро╖ %s.\n" +"Будь ласка, вставте його." -#: ../../standalone/drakbug:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Windows Migration tool" +msgid "" +"Directory %s already contains data\n" +"(%s)" msgstr "" -#: ../../standalone/drakbug:1 +#: ../../printer/main.pm:1 #, c-format -msgid "Urpmi" -msgstr "" +msgid "Printer on NetWare server" +msgstr "Принтер на NetWare сервер╕" -#: ../../standalone/drakbug:1 -#, fuzzy, c-format -msgid "Software Manager" -msgstr "Назва ресурсу" +#: ../../any.pm:1 +#, c-format +msgid "Give the ram size in MB" +msgstr "Давати розм╕р пам'ят╕ в Мб" -#: ../../standalone/drakbug:1 -#, fuzzy, c-format -msgid "Remote Control" -msgstr "В╕ддалений принтер" +#: ../../any.pm:1 +#, c-format +msgid "Real name" +msgstr "Повне ╕м'я" -#: ../../standalone/drakbug:1 +#: ../../standalone/drakfont:1 #, fuzzy, c-format -msgid "Msec" -msgstr "Миша" +msgid "done" +msgstr "Зак╕нчено" -#: ../../standalone/drakbug:1 +#: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "Menudrake" -msgstr "визначальний" +msgid "Please uncheck or remove it on next time." +msgstr "Вибер╕ть до якого посл╕довного порта п╕дключений Ваш модем?" -#: ../../standalone/drakbug:1 +#: ../../security/level.pm:1 #, fuzzy, c-format -msgid "Mandrake Online" -msgstr "Центр керування" +msgid "Higher" +msgstr "Високий" -#: ../../standalone/drakbug:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "HardDrake" -msgstr "" +msgid "Choose the partitions you want to format" +msgstr "Вибер╕ть п╕дрозд╕ли, як╕ Ви хочете в╕дформатувати" -#: ../../standalone/drakbug:1 +#: ../../standalone/drakxtv:1 #, c-format -msgid "Synchronization tool" +msgid "" +"No TV Card has been detected on your machine. Please verify that a Linux-" +"supported Video/TV Card is correctly plugged in.\n" +"\n" +"\n" +"You can visit our hardware database at:\n" +"\n" +"\n" +"http://www.linux-mandrake.com/en/hardware.php3" msgstr "" -#: ../../standalone/drakbug:1 +#: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "First Time Wizard" -msgstr "Ласкаво просимо до першого запуску Пом╕чника" +msgid "Can't find %s on %s" +msgstr "Не можу в╕дкрити %s: %s\n" -#: ../../standalone/drakbug:1 -#, fuzzy, c-format -msgid "Mandrake Control Center" -msgstr "Центр керування" +#: ../../keyboard.pm:1 +#, c-format +msgid "Japanese 106 keys" +msgstr "Японська 106 клав╕ш" -#: ../../standalone/drakbug:1 +#: ../../standalone/drakTermServ:1 #, c-format -msgid "Mandrake Bug Report Tool" +msgid "This will take a few minutes." msgstr "" -#: ../../standalone/drakconnect:1 +#: ../../lang.pm:1 #, c-format -msgid "Parameters" -msgstr "Параметри" +msgid "Burkina Faso" +msgstr "Бурк╕на Фасо" -#: ../../standalone/drakconnect:1 +#: ../../standalone/scannerdrake:1 #, c-format -msgid "Internet Connection Configuration" -msgstr "Конф╕гурац╕я з'╓днання з ╕нтернетом" +msgid "Use scanners on remote computers" +msgstr "" -#: ../../standalone/drakconnect:1 -#, c-format -msgid "DHCP Client" -msgstr "Кл╕╓нт DHCP" +#: ../../standalone/drakperm:1 +#, fuzzy, c-format +msgid "Delete selected rule" +msgstr "Видалити принтер" -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Ethernet Card" -msgstr "Плата Ethernet" +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Accessing printers on remote CUPS servers" +msgstr "Принтер на в╕ддаленому сервер╕ CUPS" -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Gateway" -msgstr "Шлюз" +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "Insert a floppy in %s" +msgstr "Вставте дискету в дисков╕д %s" -#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 +#: ../../lang.pm:1 #, c-format -msgid "Connection type: " -msgstr "Тип зв'язку:" +msgid "Maldives" +msgstr "Мальд╕ви" -#: ../../standalone/drakconnect:1 +#: ../../any.pm:1 #, c-format -msgid "Profile: " -msgstr "Проф╕ль: " +msgid "compact" +msgstr "компактний" -#: ../../standalone/drakconnect:1 +#: ../../common.pm:1 #, c-format -msgid "Internet connection configuration" -msgstr "Конф╕гурац╕я з'╓днання з ╕нтернетом" +msgid "1 minute" +msgstr "1 хвилина" -#: ../../standalone/drakconnect:1 +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "on channel %d id %d\n" +msgstr "на шин╕ %d id %d\n" + +#: ../../printer/main.pm:1 #, c-format -msgid "" -"You don't have an Internet connection.\n" -"Create one first by clicking on 'Configure'" +msgid ", multi-function device" msgstr "" -"Ви не ма╓те жодного з'╓днання з ╕нтернетом.\n" -"Створ╕ть таке з'╓днання клацнувши на \"Настро╖ти\"" -#: ../../standalone/drakconnect:1 +#: ../../lang.pm:1 #, c-format -msgid "" -"This interface has not been configured yet.\n" -"Launch the configuration wizard in the main window" +msgid "Laos" msgstr "" -#: ../../standalone/drakconnect:1 -#, c-format -msgid "activate now" -msgstr "актив╕зувати зараз" +#: ../../install_interactive.pm:1 +#, fuzzy, c-format +msgid "There is no FAT partition to resize (or not enough space left)" +msgstr "" +"Нема╓ п╕дрозд╕лу FAT для зм╕ни розм╕ру або для використання як пристр╕й " +"зворотнього монтування (або не вистача╓ в╕льного простору)" -#: ../../standalone/drakconnect:1 +#: ../../standalone/drakperm:1 #, c-format -msgid "deactivate now" -msgstr "деактив╕зувати зараз" +msgid "Up" +msgstr "" -#: ../../standalone/drakconnect:1 -#, c-format -msgid "DHCP client" -msgstr "кл╕╓нт DHCP" +#: ../../help.pm:1 ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Firewall" +msgstr "Firewall/Маршрутизатор" -#: ../../standalone/drakconnect:1 +#: ../../standalone/drakxtv:1 #, c-format -msgid "Started on boot" -msgstr "Стартувати при завантаженн╕" +msgid "Area:" +msgstr "" -#: ../../standalone/drakconnect:1 +#: ../../harddrake/data.pm:1 #, c-format -msgid "Boot Protocol" -msgstr "Протокол завантаження" +msgid "(E)IDE/ATA controllers" +msgstr "" -#: ../../standalone/drakconnect:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Adapter %s: %s" -msgstr "Плата %s: %s" +msgid "Printer Server" +msgstr "Принтер сервер" -#: ../../standalone/drakconnect:1 +#: ../../standalone/net_monitor:1 #, c-format -msgid "LAN Configuration" -msgstr "Конф╕╜урац╕я локально╖ мереж╕" +msgid "Disconnection from the Internet complete." +msgstr "" -#: ../../standalone/drakconnect:1 -#, c-format -msgid "LAN configuration" -msgstr "Конф╕╜урац╕я мереж╕" +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Custom configuration" +msgstr "Конф╕гурац╕я ╕нтернету" -#: ../../standalone/drakconnect:1 +#: ../../standalone/drakpxe:1 #, c-format msgid "" -"You don't have any configured interface.\n" -"Configure them first by clicking on 'Configure'" +"Please indicate where the installation image will be available.\n" +"\n" +"If you do not have an existing directory, please copy the CD or DVD " +"contents.\n" +"\n" msgstr "" -"У вас нема╓ жодного сконф╕╜урованого ╕нтерфейса.\n" -"Сконф╕╜уруйте ╖х спочатку, клацнувши на \"Настро╖ти\"" - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Connect..." -msgstr "З'╓днання..." - -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Disconnect..." -msgstr "В╕дключення..." - -#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 -#, c-format -msgid "Not connected" -msgstr "Нема╓ з'╓днання" -#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 +#: ../../lang.pm:1 #, c-format -msgid "Connected" -msgstr "З'╓днано" +msgid "Saint Pierre and Miquelon" +msgstr "Св. П'╓р ╕ М╕келон" -#: ../../standalone/drakconnect:1 +#: ../../standalone/drakbackup:1 #, c-format msgid "" -"Warning, another Internet connection has been detected, maybe using your " -"network" +"\n" +"Restore Backup Problems:\n" +"\n" +"During the restore step, Drakbackup will verify all your\n" +"backup files before restoring them.\n" +"Before the restore, Drakbackup will remove \n" +"your original directory, and you will loose all your \n" +"data. It is important to be careful and not modify the \n" +"backup data files by hand.\n" msgstr "" -#: ../../standalone/drakconnect:1 +#: ../../standalone/draksplash:1 #, c-format -msgid "Interface:" -msgstr "╤нтерфейс:" +msgid "saving Bootsplash theme..." +msgstr "" -#: ../../standalone/drakconnect:1 +#: ../../lang.pm:1 #, c-format -msgid "Gateway:" -msgstr "Шлюз:" +msgid "Portugal" +msgstr "Португал╕я" -#: ../../standalone/drakconnect:1 +#: ../../modules/interactive.pm:1 #, c-format -msgid "Apply" -msgstr "Застосувати" +msgid "Do you have another one?" +msgstr "Чи ви ма╓те ╕нш╕?" -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Click here to launch the wizard ->" -msgstr "" +#: ../../printer/main.pm:1 +#, fuzzy, c-format +msgid ", printing to %s" +msgstr "Помилка при запис╕ у файл %s" -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Wizard..." -msgstr "Пом╕чник..." +#: ../../network/network.pm:1 +#, fuzzy, c-format +msgid "Assign host name from DHCP address" +msgstr "Випробуйте мишку, будь-ласка" -#: ../../standalone/drakconnect:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Status:" -msgstr "Статус:" +msgid "Toggle to normal mode" +msgstr "Експерт > Звичайний" -#: ../../standalone/drakconnect:1 +#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1 #, c-format -msgid "Type:" -msgstr "Тип:" +msgid "Generic" +msgstr "Загальне" -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Internet access" -msgstr "Доступ до ╕нтернету" +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "Cylinder %d to %d\n" +msgstr "В╕д цил╕ндру %d до цил╕ндру %d \n" #: ../../standalone/drakconnect:1 #, c-format -msgid "Hostname: " -msgstr "╤м'я хоста:" +msgid "New profile..." +msgstr "Новий проф╕ль..." -#: ../../standalone/drakconnect:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Configure Local Area Network..." -msgstr "Настро╖ти локальну мережу..." +msgid "Which disk do you want to move it to?" +msgstr "На який диск ви хочете перем╕ститися?" -#: ../../standalone/drakconnect:1 +#: ../../standalone/draksplash:1 #, c-format -msgid "State" -msgstr "Статус" +msgid "Display logo on Console" +msgstr "" -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Driver" -msgstr "Драйвер" +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Windows Domain" +msgstr "Домен NIS" -#: ../../standalone/drakconnect:1 +#: ../../standalone/drakpxe:1 +#, fuzzy, c-format +msgid "Interface %s (on network %s)" +msgstr "╤нтерфейс %s (з використанням модуля %s)" + +#: ../../standalone/drakbackup:1 #, c-format -msgid "Protocol" -msgstr "Протокол" +msgid "INFO" +msgstr "" -#: ../../standalone/drakconnect:1 +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Wallis and Futuna" +msgstr "Вал╕с ╕ Футунськ╕ острови" + +#: ../../standalone/drakTermServ:1 #, c-format -msgid "Interface" -msgstr "╤нтерфейс" +msgid "Need to create /etc/dhcpd.conf first!" +msgstr "" -#: ../../standalone/drakconnect:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "Configure Internet Access..." -msgstr "Настро╖ти доступ до ╕нтернету..." +msgid "Is FPU present" +msgstr "" -#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 +#: ../../standalone/scannerdrake:1 #, c-format -msgid "Wait please" +msgid "There are no scanners found which are available on your system.\n" msgstr "" -#: ../../standalone/drakconnect:1 +#: ../../services.pm:1 #, c-format msgid "" -"Name of the profile to create (the new profile is created as a copy of the " -"current one) :" +"No additional information\n" +"about this service, sorry." msgstr "" -"Назва проф╕лю для створення (новий проф╕ль створю╓ться як коп╕я вже " -"╕снуючого):" +"Вибачте, нема╓ додатково╖ \n" +"╕нформац╕╖ про цей серв╕с." -#: ../../standalone/drakconnect:1 +#: ../../standalone/drakTermServ:1 #, c-format -msgid "New profile..." -msgstr "Новий проф╕ль..." +msgid "Build Single NIC -->" +msgstr "" -#: ../../standalone/drakconnect:1 +#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 #, c-format -msgid "Profile to delete:" -msgstr "Проф╕ль для стирання:" +msgid "Is this correct?" +msgstr "Все в╕рно?" -#: ../../standalone/drakconnect:1 +#: ../../lang.pm:1 #, c-format -msgid "Del profile..." -msgstr "Стерти проф╕ль..." +msgid "Marshall Islands" +msgstr "Маршалов╕ острови" -#: ../../standalone/drakconnect:1 -#, c-format -msgid "Network configuration (%d adapters)" -msgstr "Конф╕гурац╕я мереж╕ (%d плат)" +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Windows (FAT32)" +msgstr "Стерти Windows(TM)" -#: ../../standalone/drakedm:1 +#: ../../steps.pm:1 +#, fuzzy, c-format +msgid "Root password" +msgstr "Без паролю" + +#: ../../standalone/drakTermServ:1 #, c-format -msgid "" -"X11 Display Manager allows you to graphically log\n" -"into your system with the X Window System running and supports running\n" -"several different X sessions on your local machine at the same time." +msgid "Build All Kernels -->" msgstr "" -#: ../../standalone/drakedm:1 +#: ../../security/help.pm:1 #, c-format -msgid "Choosing a display manager" +msgid "if set to yes, report unowned files." msgstr "" -#: ../../standalone/drakfloppy:1 +#: ../../install_interactive.pm:1 #, c-format msgid "" -"Unable to properly close mkbootdisk: \n" -" %s \n" -" %s" +"You don't have a swap partition.\n" +"\n" +"Continue anyway?" msgstr "" -"Не можу коректно завершити mkbootdisk: \n" -"%s\n" -"%s" +"Ви не ма╓те п╕дрозд╕лу для своп╕нгу\n" +"\n" +"Все-таки продовжувати? " -#: ../../standalone/drakfloppy:1 +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Server IP missing!" +msgstr "Нема╓ назви сервера NCP!" + +#: ../../lang.pm:1 #, c-format -msgid "Unable to fork: %s" -msgstr "Неможливо виконати fork: %s" +msgid "Suriname" +msgstr "Сур╕нам" -#: ../../standalone/drakfloppy:1 +#: ../../any.pm:1 #, fuzzy, c-format -msgid "" -"There is no medium or it is write-protected for device %s.\n" -"Please insert one." -msgstr "" -"Нема╓ нос╕я в пристро╖ %s.\n" -"Будь ласка, вставте його." +msgid "Enable ACPI" +msgstr "Дозволити завантаження з компакт-диску?" -#: ../../standalone/drakfloppy:1 +#: ../../help.pm:1 #, c-format -msgid "Be sure a media is present for the device %s" -msgstr "Пересв╕дч╕ться, що нос╕й вставлений в прив╕д %s" +msgid "Graphical Environment" +msgstr "Граф╕чне середовище" -#: ../../standalone/drakfloppy:1 +#: ../../lang.pm:1 #, c-format -msgid "Build the disk" -msgstr "Побудувати диск" +msgid "Gibraltar" +msgstr "╫╕бралтар" -#: ../../standalone/drakfloppy:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Output" -msgstr "Вих╕д" +msgid "on Tape Device" +msgstr "" -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "Remove a module" -msgstr "Забрати модуль" +#: ../../network/modem.pm:1 +#, fuzzy, c-format +msgid "Do nothing" +msgstr "але не в╕дпов╕да╓" -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "Add a module" -msgstr "Додати модуль" +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "Delete Client" +msgstr "Кл╕╓нт DHCP" -#: ../../standalone/drakfloppy:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "omit scsi modules" -msgstr "пропускати модул╕ scsi" +msgid "Filesystem type: " +msgstr "Тип п╕дрозд╕лу: " -#: ../../standalone/drakfloppy:1 -#, c-format -msgid "if needed" -msgstr "якщо потр╕бно" +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Starting network..." +msgstr "Починаю з'╓днання..." -#: ../../standalone/drakfloppy:1 +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Vietnam" +msgstr "В'╓тнам" + +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "/_Fields description" +msgstr "Опис" + +#: ../../share/advertising/10-security.pl:1 #, c-format -msgid "omit raid modules" -msgstr "пропускати модул╕ raid" +msgid "Optimize your security by using Mandrake Linux" +msgstr "" -#: ../../standalone/drakfloppy:1 +#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1 +#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1 +#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1 +#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1 +#: ../../standalone/drakfont:1 #, c-format -msgid "force" -msgstr "примусово" +msgid "Help" +msgstr "Дов╕дка" -#: ../../standalone/drakfloppy:1 +#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format -msgid "mkinitrd optional arguments" -msgstr "додатков╕ ар╜ументи для mkinitrd" +msgid "Your personal phone number" +msgstr "Ваш особистий номер телефону" -#: ../../standalone/drakfloppy:1 +#: ../../install_interactive.pm:1 #, c-format -msgid "Expert Area" -msgstr "Д╕лянка для експерт╕в" +msgid "Which size do you want to keep for Windows on" +msgstr "Який розм╕р ви хочете залишити для Windows?" -#: ../../standalone/drakfloppy:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "kernel version" -msgstr "верс╕я ядра" +msgid "" +"Test page(s) have been sent to the printer.\n" +"It may take some time before the printer starts.\n" +msgstr "" +"Тестова стор╕нка передана програм╕ друку.\n" +"Перед тим, як принтер почне друкувати, можливо пройде\n" +"деякий час. Чи в╕н працю╓ коректно?\n" -#: ../../standalone/drakfloppy:1 +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Username required" +msgstr "╤м'я користувача" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"Depending on the default language you chose in Section , DrakX will\n" +"automatically select a particular type of keyboard configuration. However,\n" +"you may not have a keyboard that corresponds exactly to your language: for\n" +"example, if you are an English speaking Swiss person, you may have a Swiss\n" +"keyboard. Or if you speak English but are located in Quebec, you may find\n" +"yourself in the same situation where your native language and keyboard do\n" +"not match. In either case, this installation step will allow you to select\n" +"an appropriate keyboard from a list.\n" +"\n" +"Click on the \"%s\" button to be presented with the complete list of\n" +"supported keyboards.\n" +"\n" +"If you choose a keyboard layout based on a non-Latin alphabet, the next\n" +"dialog will allow you to choose the key binding that will switch the\n" +"keyboard between the Latin and non-Latin layouts." +msgstr "" +"Звично drakX вибира╓ в╕рну клав╕атуру (в залежност╕ в╕д мови, якою Ви\n" +"користу╓тесь) ╕ Ви не побачите цього кроку. Однак, можливо, Ви не\n" +"ма╓те клав╕атури, що точно в╕дпов╕да╓ Ваш╕й мов╕: наприклад, якщо Ви\n" +"агломовний швед, Ви все-одно можете забажати користуватись шведською\n" +"клав╕атурою. Або, якщо Ви говорите англ╕йською, але живете в Квебеку,\n" +"Ви потрапля╓те в анало╜╕чну ситуац╕ю. В обох випадках, Вам потр╕бно\n" +"повернутись до цього етапу установки ╕ вибрати в╕дпов╕дну клав╕атуру з\n" +"наданого списку. Все, що потр╕бно, це вибрати потр╕бну клав╕атуру ╕з\n" +"списку, що з'явля╓ться перед Вами.\n" +"\n" +"Натисн╕ть кнопку Додатково ╕ Ви побачите повний список розкладок\n" +"клав╕атур." + +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "default" -msgstr "стандартний" +msgid "SMB (Windows 9x/NT) Printer Options" +msgstr "Опц╕╖ SMB (Windows 9x/NT) принтера" -#: ../../standalone/drakfloppy:1 +#: ../../security/help.pm:1 #, c-format -msgid "General" -msgstr "Загальн╕" +msgid "" +"Arguments: (arg)\n" +"\n" +"Accept/Refuse bogus IPv4 error messages." +msgstr "" #: ../../standalone/drakfloppy:1 #, c-format -msgid "boot disk creation" -msgstr "створення завантажувального диску" +msgid "mkinitrd optional arguments" +msgstr "додатков╕ ар╜ументи для mkinitrd" -#: ../../standalone/drakfloppy:1 +#: ../../share/advertising/03-software.pl:1 #, c-format -msgid "drakfloppy" -msgstr "drakfloppy" +msgid "" +"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or " +"Kmail, create your documents with OpenOffice.org." +msgstr "" -#: ../../standalone/drakfloppy:1 +#: ../../network/isdn.pm:1 #, c-format -msgid "Size" -msgstr "Розм╕р" +msgid "Protocol for the rest of the world" +msgstr "Протокол для всього ╕ншого св╕ту" -#: ../../standalone/drakfloppy:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Module name" -msgstr "Назва модуля" +msgid "Print test pages" +msgstr "Друк тестових стор╕нок" -#: ../../standalone/drakfont:1 -#, fuzzy, c-format -msgid "Post Uninstall" -msgstr "Вийти з установки" +#: ../../Xconfig/card.pm:1 +#, c-format +msgid "64 MB or more" +msgstr "64 Мб чи б╕льше" -#: ../../standalone/drakfont:1 +#: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "Remove fonts on your system" -msgstr "У Ваш╕й систем╕ нема╓ адаптера мереж╕!" +msgid "" +"Please select the test pages you want to print.\n" +"Note: the photo test page can take a rather long time to get printed and on " +"laser printers with too low memory it can even not come out. In most cases " +"it is enough to print the standard test page." +msgstr "" +"Вибер╕ть, будь ласка, стор╕нки для друку\n" +"Зауважте: друк фотограф╕чних тестових стор╕нок може бути довгим ╕\n" +"лазерн╕ принтери з невеликим об'╓мом пам'ят╕ можуть нав╕ть зовс╕м не\n" +"надрукувати таку стор╕нку. У б╕льшост╕ випадк╕д достатньо надрукувати\n" +"стандартну пробну стор╕нку." -#: ../../standalone/drakfont:1 -#, fuzzy, c-format -msgid "Initial tests" -msgstr "Пов╕домлення при завантаженн╕" +#: ../../standalone/scannerdrake:1 +#, c-format +msgid "Please select the device where your %s is attached" +msgstr "" -#: ../../standalone/drakfont:1 -#, fuzzy, c-format -msgid "Post Install" -msgstr "Установка" +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Not formatted\n" +msgstr "Не форматований\n" -#: ../../standalone/drakfont:1 +#: ../../standalone/draksec:1 #, c-format -msgid "Install & convert Fonts" +msgid "Periodic Checks" msgstr "" -#: ../../standalone/drakfont:1 +#: ../../standalone/drakpxe:1 #, fuzzy, c-format -msgid "Copy fonts on your system" -msgstr "У Ваш╕й систем╕ нема╓ адаптера мереж╕!" +msgid "PXE Server Configuration" +msgstr "Конф╕╜урац╕я локально╖ мереж╕" -#: ../../standalone/drakfont:1 +#: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "Remove List" -msgstr "Видалити принтер" +msgid "Backup the system files before:" +msgstr "Поганий резервний файл" -#: ../../standalone/drakfont:1 +#: ../../security/level.pm:1 #, fuzzy, c-format -msgid "Selected All" -msgstr "Вибер╕ть файл" +msgid "" +"This is the standard security recommended for a computer that will be used " +"to connect to the Internet as a client." +msgstr "" +"Це - стандартний р╕вень безпеки, який рекоменду╓ться мати на\n" +"комп'ютер╕, п╕дключеному до ╕нтернету в якост╕ кл╕╓нта. Перев╕рки\n" +"безпеки тепер вмикнен╕." -#: ../../standalone/drakfont:1 +#: ../../any.pm:1 #, c-format -msgid "Unselected All" -msgstr "" +msgid "First floppy drive" +msgstr "Перша дискета" -#: ../../standalone/drakfont:1 +#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 +#: ../../standalone/logdrake:1 #, c-format -msgid "here if no." -msgstr "" +msgid "/File/_Quit" +msgstr "/Файл/В_их╕д" -#: ../../standalone/drakfont:1 +#: ../../keyboard.pm:1 #, c-format -msgid "click here if you are sure." -msgstr "" +msgid "Dvorak" +msgstr "Дворака" -#: ../../standalone/drakfont:1 -#, fuzzy, c-format -msgid "Install List" -msgstr "Встановити систему" +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Choose the new size" +msgstr "Вибер╕ть новий розм╕р" -#: ../../standalone/drakfont:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "Select the font file or directory and click on 'Add'" +msgid "Media class" msgstr "" -#: ../../standalone/drakfont:1 +#: ../../standalone/scannerdrake:1 #, c-format -msgid "" -"Before installing any fonts, be sure that you have the right to use and " -"install them on your system.\n" -"\n" -"-You can install the fonts the normal way. In rare cases, bogus fonts may " -"hang up your X Server." +msgid "The %s is not known by this version of Scannerdrake." msgstr "" -#: ../../standalone/drakfont:1 -#, fuzzy, c-format -msgid "Generic Printers" -msgstr "Принтер" - -#: ../../standalone/drakfont:1 -#, fuzzy, c-format -msgid "Abiword" -msgstr "В╕дм╕нити" - -#: ../../standalone/drakfont:1 -#, fuzzy, c-format -msgid "StarOffice" -msgstr "Оф╕сна станц╕я" +#: ../../lang.pm:1 +#, c-format +msgid "Faroe Islands" +msgstr "Фарерськ╕ острови" #: ../../standalone/drakfont:1 #, c-format -msgid "Ghostscript" +msgid "Restart XFS" msgstr "" -#: ../../standalone/drakfont:1 -#, fuzzy, c-format -msgid "Choose the applications that will support the fonts:" -msgstr "Вибер╕ть п╕дрозд╕ли, як╕ Ви хочете в╕дформатувати" +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Add host/network" +msgstr "" -#: ../../standalone/drakfont:1 +#: ../../security/help.pm:1 #, c-format msgid "" -"\n" -" Copyright (C) 2001-2002 by MandrakeSoft \n" -"\tDUPONT Sebastien (original version)\n" -" CHAUMETTE Damien \n" -"\n" -" This program is free software; you can redistribute it and/or modify\n" -" it under the terms of the GNU General Public License as published by\n" -" the Free Software Foundation; either version 2, or (at your option)\n" -" any later version.\n" -"\n" -" This program is distributed in the hope that it will be useful,\n" -" but WITHOUT ANY WARRANTY; without even the implied warranty of\n" -" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" -" GNU General Public License for more details.\n" -"\n" -" You should have received a copy of the GNU General Public License\n" -" along with this program; if not, write to the Free Software\n" -" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" -"\n" -" Thanks:\n" -" - pfm2afm: \n" -"\t by Ken Borgendale:\n" -"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n" -" - type1inst:\n" -"\t by James Macnicol: \n" -"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n" -" - ttf2pt1: \n" -"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" -" Convert ttf font files to afm and pfb fonts\n" +"if set to yes, check for empty passwords, for no password in /etc/shadow and " +"for users with the 0 id other than root." msgstr "" -#: ../../standalone/drakfont:1 -#, fuzzy, c-format -msgid "About" -msgstr "В╕дм╕нити" - -#: ../../standalone/drakfont:1 +#: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "Font List" -msgstr "Точка монтування" +msgid "Please enter the directory to save to:" +msgstr "Випробуйте мишку, будь-ласка" -#: ../../standalone/drakfont:1 +#: ../../standalone/harddrake2:1 #, fuzzy, c-format -msgid "Advanced Options" -msgstr "Конф╕╜урац╕я локально╖ мереж╕" +msgid "Model name" +msgstr "Назва модуля" -#: ../../standalone/drakfont:1 -#, fuzzy, c-format -msgid "Uninstall Fonts" -msgstr "Де╕нсталюю RPM'и" +#: ../../lang.pm:1 +#, c-format +msgid "Albania" +msgstr "Албан╕я" -#: ../../standalone/drakfont:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Get Windows Fonts" +msgid "No CDR/DVDR in drive!" msgstr "" -#: ../../standalone/drakfont:1 -#, fuzzy, c-format -msgid "Import Fonts" -msgstr "Форматувати п╕дрозд╕ли" - -#: ../../standalone/drakfont:1 -#, fuzzy, c-format -msgid "done" -msgstr "Зак╕нчено" - -#: ../../standalone/drakfont:1 -#, fuzzy, c-format -msgid "xfs restart" -msgstr "обмежити" - -#: ../../standalone/drakfont:1 +#: ../../lang.pm:1 #, c-format -msgid "Suppress Fonts Files" -msgstr "" +msgid "British Indian Ocean Territory" +msgstr "Британська територ╕я в ╤нд╕йському океан╕" -#: ../../standalone/drakfont:1 +#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1 +#: ../../standalone/drakfloppy:1 #, c-format -msgid "Restart XFS" -msgstr "" +msgid "Normal Mode" +msgstr "Звичайний режим" -#: ../../standalone/drakfont:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Suppress Temporary Files" +msgid "" +"Please be sure that the cron daemon is included in your services. \n" +"\n" +"Note that currently all 'net' medias also use the hard drive." msgstr "" -#: ../../standalone/drakfont:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "type1inst building" -msgstr "" +msgid "Printer connection type" +msgstr "Тип з'╓днання принтера" -#: ../../standalone/drakfont:1 +#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, c-format -msgid "pfm fonts conversion" -msgstr "" +msgid "No network adapter on your system!" +msgstr "У Ваш╕й систем╕ нема╓ адаптера мереж╕!" -#: ../../standalone/drakfont:1 +#: ../../printer/main.pm:1 +#, fuzzy, c-format +msgid "Network %s" +msgstr "Мережа:" + +#: ../../keyboard.pm:1 #, c-format -msgid "ttf fonts conversion" +msgid "Malayalam" msgstr "" -#: ../../standalone/drakfont:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Ghostscript referencing" -msgstr "" +msgid "Option %s out of range!" +msgstr "Параметр %s виходить за рамки дозволених меж!" -#: ../../standalone/drakfont:1 +#: ../../standalone/net_monitor:1 +#, fuzzy, c-format +msgid "Connect %s" +msgstr "З'╓днатись" + +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Fonts conversion" +msgid "Restarting CUPS..." msgstr "" -#: ../../standalone/drakfont:1 +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Printing/Scanning/Photo Cards on \"%s\"" +msgstr "Вимикаю мережу" + +#: ../../install_steps.pm:1 #, c-format -msgid "True Type install done" -msgstr "" +msgid "Duplicate mount point %s" +msgstr "Подв╕йн╕ точки монтування %s" -#: ../../standalone/drakfont:1 +#: ../../security/help.pm:1 #, c-format -msgid "please wait during ttmkfdir..." +msgid "if set to yes, run chkrootkit checks." msgstr "" -#: ../../standalone/drakfont:1 -#, fuzzy, c-format -msgid "True Type fonts installation" -msgstr "П╕дготовка установки" +#: ../../network/tools.pm:1 +#, c-format +msgid "Connection Configuration" +msgstr "Конф╕гурац╕я з'╓днання" -#: ../../standalone/drakfont:1 +#: ../../harddrake/v4l.pm:1 #, fuzzy, c-format -msgid "Fonts copy" -msgstr "Форматувати дискету" +msgid "Unknown|Generic" +msgstr "Загальне" -#: ../../standalone/drakfont:1 +#: ../../help.pm:1 #, c-format -msgid "Search for fonts in installed list" +msgid "" +"At the time you are installing Mandrake Linux, it is likely that some\n" +"packages have been updated since the initial release. Bugs may have been\n" +"fixed, security issues resolved. To allow you to benefit from these\n" +"updates, you are now able to download them from the Internet. Check \"%s\"\n" +"if you have a working Internet connection, or \"%s\" if you prefer to\n" +"install updated packages later.\n" +"\n" +"Choosing \"%s\" will display a list of places from which updates can be\n" +"retrieved. You should choose one nearer to you. A package-selection tree\n" +"will appear: review the selection, and press \"%s\" to retrieve and install\n" +"the selected package(s), or \"%s\" to abort." msgstr "" -#: ../../standalone/drakfont:1 +#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1 +#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1 +#: ../../standalone/drakperm:1 ../../standalone/draksplash:1 +#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 +#: ../../standalone/scannerdrake:1 #, c-format -msgid "could not find any font.\n" -msgstr "" +msgid "Quit" +msgstr "Вих╕д" -#: ../../standalone/drakfont:1 +#: ../../lang.pm:1 #, c-format -msgid "Reselect correct fonts" -msgstr "" +msgid "Myanmar" +msgstr "Мьянмар" -#: ../../standalone/drakfont:1 +#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format -msgid "could not find any font in your mounted partitions" -msgstr "" - -#: ../../standalone/drakfont:1 -#, fuzzy, c-format -msgid "no fonts found" -msgstr "Не знайдено %s." +msgid "Auto allocate" +msgstr "Автоматично розпод╕лити" -#: ../../standalone/drakfont:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "parse all fonts" -msgstr "" +msgid "Check bad blocks?" +msgstr "Перев╕ряти зб╕йн╕ блоки?" -#: ../../standalone/drakfont:1 -#, c-format -msgid "Unselect fonts installed" -msgstr "" +#: ../../harddrake/data.pm:1 +#, fuzzy, c-format +msgid "Other MultiMedia devices" +msgstr "╤нш╕" -#: ../../standalone/drakfont:1 -#, c-format -msgid "Search installed fonts" -msgstr "" +#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "No remote machines" +msgstr "(на ц╕й машин╕)" -#: ../../standalone/drakgw:1 +#: ../../printer/printerdrake.pm:1 #, c-format msgid "" -"Welcome to the Internet Connection Sharing utility!\n" "\n" -"%s\n" +"Welcome to the Printer Setup Wizard\n" "\n" -"Click on Configure to launch the setup wizard." -msgstr "" -"Ласкаво просимо до програми конф╕╜урац╕╖ сп╕льного користування\n" -"з'╓днання з ╕нтернетом\n" +"This wizard will help you to install your printer(s) connected to this " +"computer.\n" "\n" -"%s\n" +"If you have printer(s) connected to this machine, Please plug it/them in on " +"this computer and turn it/them on so that it/they can be auto-detected.\n" "\n" -"Клацн╕ть на \"Настро╖ти\" щоб запустити конф╕╜уратор." +" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " +"to set up your printer(s) now." +msgstr "" -#: ../../standalone/drakgw:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "Internet Connection Sharing configuration" -msgstr "Конф╕гурац╕я сп╕льного З'╓днання з ╕нтернетом." +msgid "Authentication NIS" +msgstr "NIS автентикац╕я" -#: ../../standalone/drakgw:1 +#: ../../any.pm:1 #, c-format -msgid "No Internet Connection Sharing has ever been configured." -msgstr "Сп╕льне користування з'╓днанням з ╕нтернетом сконф╕гуровано" +msgid "" +"Option ``Restrict command line options'' is of no use without a password" +msgstr "Опц╕я ``Обмежити опц╕╖ командного рядка'' не ма╓ сенсу без пароля" #: ../../standalone/drakgw:1 #, c-format -msgid "The setup has already been done, and it's currently enabled." -msgstr "" -"Установка сп╕льного користування з'╓днанням з ╕нтернетом вже зроблена,\n" -"на даний час воно дозволено." +msgid "Internet Connection Sharing currently enabled" +msgstr "Сп╕льне користування з'╓днанням з ╕нтернетом вмикнене" -#: ../../standalone/drakgw:1 +#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format -msgid "The setup has already been done, but it's currently disabled." -msgstr "" -"Установка сп╕льного користування з'╓днанням з ╕нтернетом вже зроблена,\n" -"але на даний момент воно в╕дключено." +msgid "Card IO_0" +msgstr "В/В_0 картки" -#: ../../standalone/drakgw:1 +#: ../../lang.pm:1 #, c-format -msgid "" -"Everything has been configured.\n" -"You may now share Internet connection with other computers on your Local " -"Area Network, using automatic network configuration (DHCP)." -msgstr "" -"Все сконф╕╜уровано. \n" -"\n" -"Ви можете сп╕льно користуватися з'╓днанням з ╕нтернетом разом з ╕ншими\n" -"комп'ютерами в ваш╕й локальн╕й мереж╕, з використанням автоматичного\n" -"конф╕╜урування мереж╕ (DHCP)." +msgid "United Arab Emirates" +msgstr "Об'╓днан╕ Арабськ╕ Ем╕рати" -#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 +#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format -msgid "Problems installing package %s" -msgstr "Помилки при установц╕ пакету %s" +msgid "Card IO_1" +msgstr "В/В_1 картки" -#: ../../standalone/drakgw:1 +#: ../../lang.pm:1 #, c-format -msgid "Configuring scripts, installing software, starting servers..." -msgstr "Конф╕╜урац╕я скрипт╕в, установка програм, стартування сервер╕в..." +msgid "Thailand" +msgstr "Тайланд" -#: ../../standalone/drakgw:1 +#: ../../standalone/drakTermServ:1 #, c-format -msgid "Configuring..." -msgstr "Конф╕гурац╕я..." +msgid "Routers:" +msgstr "" -#: ../../standalone/drakgw:1 +#: ../../lang.pm:1 #, c-format -msgid "Potential LAN address conflict found in current config of %s!\n" -msgstr "В дан╕й конф╕гурац╕╖ %s знайдено потенц╕йний конфл╕кт адреси мереж╕!\n" +msgid "Kazakhstan" +msgstr "Казахстан" -#: ../../standalone/drakgw:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "The Local Network did not finish with `.0', bailing out." +msgid "Display all available remote CUPS printers" msgstr "" -#: ../../standalone/drakgw:1 +#: ../../install_steps_newt.pm:1 #, c-format -msgid "Re-configure interface and DHCP server" -msgstr "" +msgid "Mandrake Linux Installation %s" +msgstr "Установка Mandrake Linux %s" -#: ../../standalone/drakgw:1 +#: ../../keyboard.pm:1 #, c-format -msgid "The maximum lease (in seconds)" -msgstr "" +msgid "Thai keyboard" +msgstr "Тайська клав╕атура" -#: ../../standalone/drakgw:1 +#: ../../network/modem.pm:1 #, c-format -msgid "The default lease (in seconds)" -msgstr "" +msgid "Dialup options" +msgstr "Параметри зв'язку по модему" -#: ../../standalone/drakgw:1 +#: ../../lang.pm:1 #, c-format -msgid "The DHCP end range" -msgstr "" +msgid "Bouvet Island" +msgstr "Буве" -#: ../../standalone/drakgw:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "The DHCP start range" +msgid "If no port is given, 631 will be taken as default." msgstr "" -#: ../../standalone/drakgw:1 -#, fuzzy, c-format -msgid "The internal domain name" -msgstr "Нова назва принтера" - -#: ../../standalone/drakgw:1 -#, fuzzy, c-format -msgid "The DNS Server IP" -msgstr "IP адреса CUPS сервера" - -#: ../../standalone/drakgw:1 -#, fuzzy, c-format -msgid "(This) DHCP Server IP" -msgstr "IP адреса CUPS сервера" - -#: ../../standalone/drakgw:1 +#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "" -"DHCP Server Configuration.\n" -"\n" -"Here you can select different options for the DHCP server configuration.\n" -"If you don't know the meaning of an option, simply leave it as it is.\n" +"Change your Cd-Rom!\n" "\n" +"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " +"done.\n" +"If you don't have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" - -#: ../../standalone/drakgw:1 -#, fuzzy, c-format -msgid "Local Network adress" -msgstr "не знайдена плата мереж╕" - -#: ../../standalone/drakgw:1 -#, c-format -msgid "" -"I can keep your current configuration and assume you already set up a DHCP " -"server; in that case please verify I correctly read the Network that you use " -"for your local network; I will not reconfigure it and I will not touch your " -"DHCP server configuration.\n" +"Зм╕н╕ть компакт-диск!\n" "\n" -"The default DNS entry is the Caching Nameserver configured on the firewall. " -"You can replace that with your ISP DNS IP, for example.\n" -"\t\t \n" -"Otherwise, I can reconfigure your interface and (re)configure a DHCP server " -"for you.\n" +"Будь-ласка, вставте компакт-диск, позначений \"%s\" у пристр╕й ╕\n" +"натисн╕ть Гаразд п╕сля цього.\n" "\n" +"Якщо ви не ма╓те такого диску, натисн╕ть В╕дм╕нити, щоб не\n" +"встановлювати з цього диску." + +#: ../../keyboard.pm:1 +#, c-format +msgid "Polish" +msgstr "Польська" + +#: ../../standalone/drakbug:1 +#, fuzzy, c-format +msgid "Mandrake Online" +msgstr "Центр керування" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "\t-Network by webdav.\n" msgstr "" -#: ../../standalone/drakgw:1 +#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, c-format msgid "" -"Current configuration of `%s':\n" -"\n" -"Network: %s\n" -"IP address: %s\n" -"IP attribution: %s\n" -"Driver: %s" +"No ethernet network adapter has been detected on your system. Please run the " +"hardware configuration tool." msgstr "" +"У Ваш╕й систем╕ нема╓ сконф╕╜урованого адаптера мереж╕\n" +"ethernet. Скористайтесь, будь-ласка, програмою для конф╕гурац╕╖\n" +"апаратних засоб╕в." +#: ../../network/network.pm:1 ../../standalone/drakconnect:1 #: ../../standalone/drakgw:1 -#, fuzzy, c-format -msgid "Current interface configuration" -msgstr "Зм╕нити конф╕гурац╕ю принтера" +#, c-format +msgid "Netmask" +msgstr "Маска мереж╕" -#: ../../standalone/drakgw:1 +#: ../../diskdrake/hd_gtk.pm:1 #, fuzzy, c-format -msgid "Show current interface configuration" -msgstr "Зм╕нити конф╕гурац╕ю принтера" +msgid "No hard drives found" +msgstr "Локальний принтер" -#: ../../standalone/drakgw:1 +#: ../../mouse.pm:1 #, c-format -msgid "No (experts only)" -msgstr "" +msgid "Logitech CC Series" +msgstr "Типу Logitech CC" -#: ../../standalone/drakgw:1 +#: ../../mouse.pm:1 +#, c-format +msgid "2 buttons" +msgstr "Двох кнопочна" + +#: ../../network/isdn.pm:1 +#, c-format +msgid "What kind is your ISDN connection?" +msgstr "Який тип з'╓днання ISDN Ви ма╓те?" + +#: ../../any.pm:1 +#, c-format +msgid "Label" +msgstr "Етикетка" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Save on floppy" +msgstr "Записати на дискету" + +#: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "Automatic reconfiguration" -msgstr "Автоматична конф╕╜урац╕я CUPS" +msgid "Printer auto-detection" +msgstr "Користуватися автовизначенням" -#: ../../standalone/drakgw:1 +#: ../../network/isdn.pm:1 +#, fuzzy, c-format +msgid "Which of the following is your ISDN card?" +msgstr "Яка Ваша ISDN плата?" + +#: ../../services.pm:1 #, c-format msgid "" -"Warning, the network adapter (%s) is already configured.\n" -"\n" -"Do you want an automatic re-configuration?\n" -"\n" -"You can do it manually but you need to know what you're doing." +"NFS is a popular protocol for file sharing across TCP/IP networks.\n" +"This service provides NFS server functionality, which is configured via the\n" +"/etc/exports file." msgstr "" +"NFS - це дуже популярний протокол для сп╕льного використання файл╕в на\n" +"комп'ютерах, з'╓днаних мережею TCP/IP. Цей серв╕с забезпечу╓ NFS\n" +"сервер, який конф╕╜уру╓ться за допомогою файла /etc/exports." -#: ../../standalone/drakgw:1 +#: ../../standalone/drakbug:1 #, fuzzy, c-format -msgid "Network interface already configured" -msgstr "Мон╕тор не сконф╕╜урований" +msgid "Msec" +msgstr "Миша" -#: ../../standalone/drakgw:1 +#: ../../interactive/stdio.pm:1 #, c-format msgid "" -"Please choose what network adapter will be connected to your Local Area " -"Network." +"=> Notice, a label changed:\n" +"%s" msgstr "" -"Вибер╕ть, будь-ласка, який адаптер мереж╕ буде п╕дключено до локально╖\n" -"мереж╕." -#: ../../standalone/drakgw:1 +#: ../../harddrake/v4l.pm:1 #, c-format +msgid "Number of capture buffers:" +msgstr "" + +#: ../../interactive/stdio.pm:1 +#, fuzzy, c-format +msgid "Your choice? (0/1, default `%s') " +msgstr "Ваш виб╕р? (рекомендований %s) " + +#: ../../help.pm:1 +#, fuzzy, c-format msgid "" -"There is only one configured network adapter on your system:\n" +"Any partitions that have been newly defined must be formatted for use\n" +"(formatting means creating a file system).\n" "\n" -"%s\n" +"At this time, you may wish to reformat some already existing partitions to\n" +"erase any data they contain. If you wish to do that, please select those\n" +"partitions as well.\n" "\n" -"I am about to setup your Local Area Network with that adapter." -msgstr "" -"У Ваш╕й систем╕ присутн╕й т╕льки один адаптер мереж╕:\n" +"Please note that it is not necessary to reformat all pre-existing\n" +"partitions. You must reformat the partitions containing the operating\n" +"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n" +"reformat partitions containing data that you wish to keep (typically\n" +"\"/home\").\n" "\n" -"%s\n" +"Please be careful when selecting partitions. After formatting, all data on\n" +"the selected partitions will be deleted and you will not be able to recover\n" +"it.\n" "\n" -"Зараз буде встановлена локальна мережа з цим адаптером." - -#: ../../standalone/drakgw:1 -#, c-format -msgid "Network interface" -msgstr "╤нтерфейс мереж╕" - -#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 -#, c-format -msgid "" -"No ethernet network adapter has been detected on your system. Please run the " -"hardware configuration tool." +"Click on \"%s\" when you are ready to format partitions.\n" +"\n" +"Click on \"%s\" if you want to choose another partition for your new\n" +"Mandrake Linux operating system installation.\n" +"\n" +"Click on \"%s\" if you wish to select partitions that will be checked for\n" +"bad blocks on the disk." msgstr "" -"У Ваш╕й систем╕ нема╓ сконф╕╜урованого адаптера мереж╕\n" -"ethernet. Скористайтесь, будь-ласка, програмою для конф╕гурац╕╖\n" -"апаратних засоб╕в." +"Будь-який з нових визначених п╕дрозд╕л╕в ма╓ бути в╕дформатований для\n" +"використання (форматування означа╓ створення файлово╖ системи).\n" +"\n" +"Зараз Ви, можливо, захочете в╕дформатувати деяк╕ з уже ╕снуючих\n" +"п╕дрозд╕л╕в для того, щоб стерти дан╕, як╕ на них записан╕. Якщо Ви\n" +"хочете це зробити, вибер╕ть також п╕дрозд╕ли, як╕ ви хочете\n" +"в╕дформатувати.\n" +"\n" +"Зауважте, однак, що не обов'язково форматувати вс╕ п╕дрозд╕ли, як╕\n" +"╕снували ран╕ше. Ви ма╓те в╕дформатувати п╕дрозд╕ли, як╕ м╕стять\n" +"операц╕йну систему (так╕, як \"/\", \"/usr\" чи \"/var\"), але ви не ма╓те\n" +"форматувати т╕ розд╕ли, як╕ м╕стять дан╕, як╕ ви б хот╕ли зберегти\n" +"(типово це п╕дрозд╕л \"/home\").\n" +"\n" +"Будьте уважн╕ з вибором п╕дрозд╕л╕в. П╕сля форматування вс╕ дан╕ на\n" +"п╕дрозд╕лах будуть стерт╕ ╕ ви не зможете в╕дновити н╕чого з них.\n" +"\n" +"Клацн╕ть на \"Гаразд\" коли ви готов╕ приступити до форматування\n" +"п╕дрозд╕л╕в.\n" +"\n" +"Клацн╕ть на \"В╕дм╕нити\", якщо ви хочете вибрати ╕нш╕ п╕дрозд╕ли для\n" +"того, щоб встановити нову систему Мандрейк Л╕накс.\n" +"\n" +"Натисн╕ть на Додатково, якщо Ви хочете вибрати п╕дрозд╕ли для ╖хньо╖\n" +"перев╕рки на ╕снування зб╕йних блок╕в." -#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 +#: ../../keyboard.pm:1 #, c-format -msgid "No network adapter on your system!" -msgstr "У Ваш╕й систем╕ нема╓ адаптера мереж╕!" +msgid "French" +msgstr "Французька" -#: ../../standalone/drakgw:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Interface %s" -msgstr "╤нтерфейс %s" +msgid "Czech (QWERTY)" +msgstr "Чеська (QWERTY)" -#: ../../standalone/drakgw:1 -#, c-format -msgid "Interface %s (using module %s)" -msgstr "╤нтерфейс %s (з використанням модуля %s)" +#: ../../standalone/service_harddrake:1 +#, fuzzy, c-format +msgid "Hardware probing in progress" +msgstr "знайдено на порту %s" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Net Device" msgstr "Принтер сервер" -#: ../../standalone/drakgw:1 +#: ../../install_steps_interactive.pm:1 ../../steps.pm:1 +#, c-format +msgid "Summary" +msgstr "Загалом" + +#: ../../printer/printerdrake.pm:1 #, c-format msgid "" -"Please enter the name of the interface connected to the internet.\n" -"\n" -"Examples:\n" -"\t\tppp+ for modem or DSL connections, \n" -"\t\teth0, or eth1 for cable connection, \n" -"\t\tippp+ for a isdn connection.\n" +" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " +"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" -#: ../../standalone/drakgw:1 +#: ../../standalone/drakbackup:1 #, fuzzy, c-format +msgid "Next" +msgstr "Текст" + +#: ../../bootloader.pm:1 +#, fuzzy, c-format +msgid "You can't install the bootloader on a %s partition\n" +msgstr "Де ви хочете встановити стартовий блок?" + +#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 +#, c-format +msgid "CHAP" +msgstr "CHAP" + +#: ../../network/network.pm:1 +#, fuzzy, c-format +msgid "(bootp/dhcp/zeroconf)" +msgstr "(bootp/dhcp)" + +#: ../../standalone/drakautoinst:1 +#, c-format msgid "" -"You are about to configure your computer to share its Internet connection.\n" -"With that feature, other computers on your local network will be able to use " -"this computer's Internet connection.\n" "\n" -"Make sure you have configured your Network/Internet access using drakconnect " -"before going any further.\n" +"Welcome.\n" "\n" -"Note: you need a dedicated Network Adapter to set up a Local Area Network " -"(LAN)." +"The parameters of the auto-install are available in the sections on the left" msgstr "" -"Тепер п╕сля того, як параметри Вашого з'╓днання з ╤нтернетом\n" -"встановлен╕, Ви можете скоф╕╜урувати св╕й комп'ютер таким чином, щоб\n" -"в╕н дозволяв сп╕льне використання свого з'╓днання до\n" -"╤нтернету. \n" -"\n" -"Прим╕тка: Вам для цього потр╕бно мати плату мереж╕, щоб настро╖ти\n" -"локальну мережу (LAN)." -#: ../../standalone/drakgw:1 +#: ../../lang.pm:1 #, c-format -msgid "Internet Connection Sharing" -msgstr "Сп╕льне використанн з'╓днання з ╕нтернетом" +msgid "Puerto Rico" +msgstr "ПуертоР╕ко" + +#: ../../standalone/draksplash:1 +#, c-format +msgid "" +"package 'ImageMagick' is required to be able to complete configuration.\n" +"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit" +msgstr "" -#: ../../standalone/drakgw:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Internet Connection Sharing is now enabled." -msgstr "Сп╕льне користування з'╓днанням з ╕нтернетом вмикнене" +msgid "Lithuanian \"number row\" QWERTY" +msgstr "Литовська \"цифровий ряд\" QWERTY" -#: ../../standalone/drakgw:1 +#: ../../install_any.pm:1 #, c-format -msgid "Enabling servers..." -msgstr "Вмикаю сервери..." +msgid "" +"The following packages will be removed to allow upgrading your system: %s\n" +"\n" +"\n" +"Do you really want to remove these packages?\n" +msgstr "" -#: ../../standalone/drakgw:1 +#: ../../lang.pm:1 #, c-format -msgid "dismiss" -msgstr "прибрати" +msgid "Anguilla" +msgstr "Анг╕лья" -#: ../../standalone/drakgw:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "reconfigure" -msgstr "перенастро╖ти" +msgid "NIS Domain" +msgstr "Домен NIS" -#: ../../standalone/drakgw:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "enable" -msgstr "дозволити" - -#: ../../standalone/drakgw:1 -#, fuzzy, c-format msgid "" -"The setup of Internet connection sharing has already been done.\n" -"It's currently disabled.\n" "\n" -"What would you like to do?" +"- User Files:\n" msgstr "" -"Установка сп╕льного користування з'╓днанням з ╕нтернетом вже\n" -"зроблена. Сп╕льне користування в даний момент вимкнене.\n" -"\n" -"Що Ви бажа╓те зробити?" -#: ../../standalone/drakgw:1 +#: ../../lang.pm:1 #, c-format -msgid "Internet Connection Sharing currently disabled" -msgstr "Сп╕льне користування з'╓днанням з ╕нтернетом вимкнене" +msgid "Antarctica" +msgstr "Антарктика" -#: ../../standalone/drakgw:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Internet Connection Sharing is now disabled." -msgstr "Сп╕льне користування з'╓днанням з ╕нтернетом вимкнене" +msgid "Mount options" +msgstr "Параметри монтування:" -#: ../../standalone/drakgw:1 +#: ../../lang.pm:1 #, c-format -msgid "Disabling servers..." -msgstr "Заборона сервер╕в..." +msgid "Jamaica" +msgstr "Ямайка" -#: ../../standalone/drakgw:1 -#, c-format -msgid "disable" -msgstr "заборонити" +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "" +"Assign raw devices to block devices (such as hard drive\n" +"partitions), for the use of applications such as Oracle or DVD players" +msgstr "" +"Поставити \"сир╕\" файли спец╕альних пристро╖в у в╕дпов╕дн╕сть до\n" +"блочних пристро╖в (як, наприклад, п╕дрозд╕ли жорсткого диску) для\n" +"використання в програмах под╕бних до Oracle." -#: ../../standalone/drakgw:1 +#: ../../security/help.pm:1 #, c-format msgid "" -"The setup of Internet Connection Sharing has already been done.\n" -"It's currently enabled.\n" +"Arguments: (arg, alert=1)\n" "\n" -"What would you like to do?" +"Enable/Disable name resolution spoofing protection. If\n" +"\\fIalert\\fP is true, also reports to syslog." msgstr "" -"Установка сп╕льного користування з'╓днанням з ╕нтернетом вже\n" -"зроблена. Сп╕льне користування в даний момент дозволене.\n" -"\n" -"Що Ви бажа╓те зробити?" -#: ../../standalone/drakgw:1 +#: ../../install_steps_gtk.pm:1 #, c-format -msgid "Internet Connection Sharing currently enabled" -msgstr "Сп╕льне користування з'╓днанням з ╕нтернетом вмикнене" +msgid "Please wait, preparing installation..." +msgstr "Зачекайте, ╕де п╕дготовка установки" -#: ../../standalone/drakgw:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Sorry, we support only 2.4 kernels." -msgstr "" +msgid "Czech (QWERTZ)" +msgstr "Чеська (QWERTZ)" -#: ../../standalone/drakhelp:1 +#: ../../network/network.pm:1 #, c-format -msgid "" -"No browser is installed on your system, Please install one if you want to " -"browse the help system" +msgid "Track network card id (useful for laptops)" msgstr "" +"Записати id плати мереж╕ (може знадобиться при користуванн╕ моб╕льним " +"комп'ютером)" -#: ../../standalone/drakperm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Path" -msgstr "" - -#: ../../standalone/drakperm:1 -#, fuzzy, c-format -msgid "group :" -msgstr "Робоча група" +msgid "The port number should be an integer!" +msgstr "Номер порта ма╓ бути ц╕лим числом!" -#: ../../standalone/drakperm:1 +#: ../../standalone/draksplash:1 #, fuzzy, c-format -msgid "user :" -msgstr "╤м'я користувача" +msgid "You must choose an image file first!" +msgstr "Введ╕ть URI пристрою принтера" -#: ../../standalone/drakperm:1 +#: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "Path selection" -msgstr "Зберегти виб╕р пакет╕в" +msgid "Restore from Hard Disk." +msgstr "В╕дновити з дискети" -#: ../../standalone/drakperm:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "when checked, owner and group won't be changed" -msgstr "" - -#: ../../standalone/drakperm:1 -#, fuzzy, c-format -msgid "Use group id for execution" -msgstr "Користуватися автовизначенням" - -#: ../../standalone/drakperm:1 -#, fuzzy, c-format -msgid "Use owner id for execution" -msgstr "Користуватися автовизначенням" +msgid "Add to LVM" +msgstr "Додати до LVM" -#: ../../standalone/drakperm:1 +#: ../../network/network.pm:1 #, c-format -msgid "" -"Used for directory:\n" -" only owner of directory or file in this directory can delete it" -msgstr "" +msgid "DNS server" +msgstr "Сервер DNS" -#: ../../standalone/drakperm:1 +#: ../../lang.pm:1 #, c-format -msgid "Set-GID" -msgstr "" +msgid "Trinidad and Tobago" +msgstr "Тр╕н╕дад та Тобаго" -#: ../../standalone/drakperm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Set-UID" -msgstr "" +msgid "LPD and LPRng do not support IPP printers.\n" +msgstr "LPD та LPRng не п╕дтримують принтери IPP.\n" -#: ../../standalone/drakperm:1 +#: ../../fsedit.pm:1 #, c-format -msgid "sticky-bit" -msgstr "" +msgid "simple" +msgstr "простий" -#: ../../standalone/drakperm:1 -#, fuzzy, c-format -msgid "Property" -msgstr "Порт" +#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Clear all" +msgstr "Очистити все" -#: ../../standalone/drakperm:1 -#, fuzzy, c-format -msgid "Permissions" -msgstr "Верс╕я: %s\n" +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "No test pages" +msgstr "Нема╓ тестових стор╕нок" -#: ../../standalone/drakperm:1 -#, fuzzy, c-format -msgid "Current user" -msgstr "Прийняти користувача" +#: ../../standalone/drakconnect:1 +#, c-format +msgid "Adapter %s: %s" +msgstr "Плата %s: %s" -#: ../../standalone/drakperm:1 +#: ../../lang.pm:1 #, c-format -msgid "browse" -msgstr "" +msgid "Falkland Islands (Malvinas)" +msgstr "Фолклендськ╕ острови (Мальв╕нськ╕)" -#: ../../standalone/drakperm:1 +#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format -msgid "Edit current rule" -msgstr "" +msgid "Unknown model" +msgstr "Нев╕дома модель" -#: ../../standalone/drakperm:1 +#: ../../security/help.pm:1 #, c-format -msgid "edit" +msgid "if set to yes, check files/directories writable by everybody." msgstr "" -#: ../../standalone/drakperm:1 -#, fuzzy, c-format -msgid "Delete selected rule" -msgstr "Видалити принтер" - -#: ../../standalone/drakperm:1 +#: ../../help.pm:1 #, fuzzy, c-format -msgid "delete" -msgstr "Стерти" +msgid "authentication" +msgstr "Автентикац╕я" -#: ../../standalone/drakperm:1 +#: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "Add a new rule at the end" -msgstr "Додати принтер" +msgid "Backup Now" +msgstr "Установка файл. систем" -#: ../../standalone/drakperm:1 -#, fuzzy, c-format -msgid "add a rule" -msgstr "Додати модуль" +#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 +#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 +#, c-format +msgid "/_File" +msgstr "/Файл" -#: ../../standalone/drakperm:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Move selected rule down one level" +msgid "Removing printer from Star Office/OpenOffice.org/GIMP" msgstr "" -#: ../../standalone/drakperm:1 -#, fuzzy, c-format -msgid "Down" -msgstr "Зак╕нчено" - -#: ../../standalone/drakperm:1 +#: ../../services.pm:1 #, c-format -msgid "Move selected rule up one level" +msgid "" +"Launch packet filtering for Linux kernel 2.2 series, to set\n" +"up a firewall to protect your machine from network attacks." msgstr "" +"Запуска╓ механ╕зм ф╕льтрування пакет╕в для ядра 2.2 Л╕накса, для того\n" +"щоб мати захист типу firewall на ваш╕й систем╕." -#: ../../standalone/drakperm:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Up" +msgid "Tamil (ISCII-layout)" msgstr "" -#: ../../standalone/drakperm:1 +#: ../../lang.pm:1 #, c-format -msgid "select perm file to see/edit" -msgstr "" +msgid "Mayotte" +msgstr "Майотт" -#: ../../standalone/drakperm:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "" -"Drakperm is used to see files to use in order to fix permissions, owners, " -"and groups via msec.\n" -"You can also edit your own rules which will owerwrite the default rules." -msgstr "" +msgid "Creating auto install floppy..." +msgstr "Створення автоустановочно╖ дискети" -#: ../../standalone/drakperm:1 +#: ../../standalone/scannerdrake:1 #, fuzzy, c-format -msgid "permissions" -msgstr "п╕дрозд╕л %s" +msgid "Searching for scanners ..." +msgstr "Локальний принтер" -#: ../../standalone/drakperm:1 +#: ../../steps.pm:1 #, fuzzy, c-format -msgid "group" -msgstr "Робоча група" +msgid "Partitioning" +msgstr "Друк" -#: ../../standalone/drakperm:1 +#: ../../lang.pm:1 #, fuzzy, c-format -msgid "user" -msgstr "╤м'я користувача" +msgid "Russia" +msgstr "Рос╕йська" -#: ../../standalone/drakperm:1 +#: ../../network/netconnect.pm:1 #, c-format -msgid "path" -msgstr "" +msgid "ethernet card(s) detected" +msgstr "знайдено плата (и) Ethernet " -#: ../../standalone/drakpxe:1 +#: ../../standalone/logdrake:1 #, fuzzy, c-format -msgid "Location of auto_install.cfg file" -msgstr "Створення автоустановочно╖ дискети" +msgid "Syslog" +msgstr "syslog" -#: ../../standalone/drakpxe:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "" -"Please indicate where the auto_install.cfg file is located.\n" -"\n" -"Leave it blank if you do not want to set up automatic installation mode.\n" -"\n" +msgid "Can't create catalog!" msgstr "" -#: ../../standalone/drakpxe:1 +#: ../../share/advertising/11-mnf.pl:1 #, c-format msgid "" -"No CD or DVD image found, please copy the installation program and rpm files." +"Complete your security setup with this very easy-to-use software which " +"combines high performance components such as a firewall, a virtual private " +"network (VPN) server and client, an intrusion detection system and a traffic " +"manager." msgstr "" -#: ../../standalone/drakpxe:1 +#: ../../fsedit.pm:1 #, fuzzy, c-format -msgid "No image found" -msgstr "Локальний принтер" +msgid "Not enough free space for auto-allocating" +msgstr "Недостатньо в╕льного простору для автоматичного под╕лу" -#: ../../standalone/drakpxe:1 -#, fuzzy, c-format -msgid "Installation image directory" -msgstr "Xpmac (драйвер дисплея для установки)" +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Set root password" +msgstr "Встановити пароль root'а" -#: ../../standalone/drakpxe:1 +#: ../../harddrake/sound.pm:1 #, c-format msgid "" -"Please indicate where the installation image will be available.\n" -"\n" -"If you do not have an existing directory, please copy the CD or DVD " -"contents.\n" -"\n" +"There's no free driver for your sound card (%s), but there's a proprietary " +"driver at \"%s\"." msgstr "" -#: ../../standalone/drakpxe:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "The DHCP end ip" +msgid "After resizing partition %s, all data on this partition will be lost" msgstr "" +"П╕сля зм╕ни розм╕ру п╕дрозд╕лу %s, вс╕ дан╕ на цьому п╕дрозд╕л╕ будуть\n" +"втрачен╕" -#: ../../standalone/drakpxe:1 +#: ../../standalone/drakconnect:1 #, c-format -msgid "The DHCP start ip" -msgstr "" +msgid "Internet connection configuration" +msgstr "Конф╕гурац╕я з'╓днання з ╕нтернетом" -#: ../../standalone/drakpxe:1 +#: ../../standalone/drakxtv:1 #, c-format -msgid "" -"The DHCP server will allow other computer to boot using PXE in the given " -"range of address.\n" -"\n" -"The network address is %s using a netmask of %s.\n" -"\n" -msgstr "" - -#: ../../standalone/drakpxe:1 -#, fuzzy, c-format -msgid "Interface %s (on network %s)" -msgstr "╤нтерфейс %s (з використанням модуля %s)" - -#: ../../standalone/drakpxe:1 -#, fuzzy, c-format -msgid "Please choose which network interface will be used for the dhcp server." +msgid "Scanning for TV channels" msgstr "" -"Вибер╕ть яку плату мереж╕ Ви хочете використати для з'╓днання з\n" -"╤нтернетом" -#: ../../standalone/drakpxe:1 -#, fuzzy, c-format -msgid "" -"You are about to configure your computer to install a PXE server as a DHCP " -"server\n" -"and a TFTP server to build an installation server.\n" -"With that feature, other computers on your local network will be installable " -"using this computer as source.\n" -"\n" -"Make sure you have configured your Network/Internet access using drakconnect " -"before going any further.\n" -"\n" -"Note: you need a dedicated Network Adapter to set up a Local Area Network " -"(LAN)." +#: ../../standalone/drakbug:1 +#, c-format +msgid "Kernel:" msgstr "" -"Тепер п╕сля того, як параметри Вашого з'╓днання з ╤нтернетом\n" -"встановлен╕, Ви можете скоф╕╜урувати св╕й комп'ютер таким чином, щоб\n" -"в╕н дозволяв сп╕льне використання свого з'╓днання до\n" -"╤нтернету. \n" -"\n" -"Прим╕тка: Вам для цього потр╕бно мати плату мереж╕, щоб настро╖ти\n" -"локальну мережу (LAN)." -#: ../../standalone/drakpxe:1 +#: ../../standalone/harddrake2:1 #, fuzzy, c-format -msgid "Installation Server Configuration" -msgstr "Конф╕╜урац╕я локально╖ мереж╕" +msgid "/_About..." +msgstr "/П╕дказка/Про..." -#: ../../standalone/drakpxe:1 +#: ../../keyboard.pm:1 #, fuzzy, c-format -msgid "PXE Server Configuration" -msgstr "Конф╕╜урац╕я локально╖ мереж╕" +msgid "Bengali" +msgstr "дозволити" -#: ../../standalone/draksec:1 -#, fuzzy, c-format -msgid "Please wait, setting security options..." -msgstr "Зачекайте, ╕де п╕дготовка установки" +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Preference: " +msgstr "Установки: " -#: ../../standalone/draksec:1 -#, fuzzy, c-format -msgid "Please wait, setting security level..." -msgstr "Встановлення р╕вня безпеки" +#: ../../standalone/drakconnect:1 +#, c-format +msgid "Wizard..." +msgstr "Пом╕чник..." -#: ../../standalone/draksec:1 +#: ../../install_steps_interactive.pm:1 ../../services.pm:1 #, c-format -msgid "Periodic Checks" +msgid "Services: %d activated for %d registered" msgstr "" -#: ../../standalone/draksec:1 -#, fuzzy, c-format -msgid "System Options" -msgstr "Опц╕╖ модуля:" +#: ../../any.pm:1 +#, c-format +msgid "Create a bootdisk" +msgstr "Створити авар╕йну дискету" -#: ../../standalone/draksec:1 -#, fuzzy, c-format -msgid "Network Options" -msgstr "Опц╕╖ модуля:" +#: ../../lang.pm:1 +#, c-format +msgid "Solomon Islands" +msgstr "Соломонов╕ острови" -#: ../../standalone/draksec:1 +#: ../../modules/interactive.pm:1 #, c-format -msgid "" -"The following options can be set to customize your\n" -"system security. If you need an explanation, look at the help tooltip.\n" -msgstr "" +msgid "(module %s)" +msgstr "(модуль %s)" -#: ../../standalone/draksec:1 -#, fuzzy, c-format -msgid "Security Administrator:" -msgstr "Опц╕╖ в╕ддаленого принтера" +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Workgroup" +msgstr "Робоча група" -#: ../../standalone/draksec:1 +#: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "Security Alerts:" -msgstr "Встановлення р╕вня безпеки" +msgid "Printer host name or IP" +msgstr "Назва хоста принтера" -#: ../../standalone/draksec:1 -#, fuzzy, c-format -msgid "Security Level:" -msgstr "Встановлення р╕вня безпеки" +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Host Path or Module" +msgstr "" -#: ../../standalone/draksec:1 +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Name of printer should contain only letters, numbers and the underscore" +msgstr "" +"Назва принтера ма╓ складатися т╕льки з л╕тер, цифр та символа п╕дкреслення." + +#: ../../standalone/drakgw:1 #, fuzzy, c-format -msgid "(default value: %s)" -msgstr " (Основна)" +msgid "Show current interface configuration" +msgstr "Зм╕нити конф╕гурац╕ю принтера" -#: ../../standalone/draksec:1 -#, c-format -msgid "" -"Standard: This is the standard security recommended for a computer that will " -"be used to connect\n" -" to the Internet as a client.\n" -"\n" -"High: There are already some restrictions, and more automatic checks " -"are run every night.\n" -"\n" -"Higher: The security is now high enough to use the system as a server " -"which can accept\n" -" connections from many clients. If your machine is only a " -"client on the Internet, you\n" -" should choose a lower level.\n" -"\n" -"Paranoid: This is similar to the previous level, but the system is entirely " -"closed and security\n" -" features are at their maximum\n" -"\n" -"Security Administrator:\n" -" If the 'Security Alerts' option is set, security alerts will " -"be sent to this user (username or\n" -" email)" +#: ../../help.pm:1 +#, c-format +msgid "Development" +msgstr "Розробник" + +#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1 +#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1 +#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1 +#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 +#: ../../standalone/scannerdrake:1 +#, c-format +msgid "Done" +msgstr "Зак╕нчено" + +#: ../../network/drakfirewall.pm:1 +#, fuzzy, c-format +msgid "Web Server" +msgstr "Сервер" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "\tDo not include System Files\n" msgstr "" -#: ../../standalone/draksound:1 +#: ../../lang.pm:1 +#, c-format +msgid "Chile" +msgstr "Ч╕л╕" + +#: ../../printer/printerdrake.pm:1 #, c-format msgid "" -"\n" -"\n" -"\n" -"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig " -"program. Just type \"sndconfig\" in a console." +"The inkjet printer drivers provided by Lexmark only support local printers, " +"no printers on remote machines or print server boxes. Please connect your " +"printer to a local port or configure it on the machine where it is connected " +"to." msgstr "" -#: ../../standalone/draksound:1 +#: ../../printer/printerdrake.pm:1 #, c-format msgid "" -"No Sound Card has been detected on your machine. Please verify that a Linux-" -"supported Sound Card is correctly plugged in.\n" -"\n" -"\n" -"You can visit our hardware database at:\n" -"\n" +"Your multi-function device was configured automatically to be able to scan. " +"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the " +"scanner when you have more than one) from the command line or with the " +"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, " +"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire" +"\" menu. Call also \"man scanimage\" on the command line to get more " +"information.\n" "\n" -"http://www.linux-mandrake.com/en/hardware.php3" +"Do not use \"scannerdrake\" for this device!" msgstr "" -#: ../../standalone/draksound:1 -#, fuzzy, c-format -msgid "No Sound Card detected!" -msgstr "Нема╓ з'╓днання" +#: ../../any.pm:1 +#, c-format +msgid "(already added %s)" +msgstr "(вже створений %s)" -#: ../../standalone/draksplash:1 +#: ../../printer/main.pm:1 #, c-format -msgid "%s BootSplash (%s) preview" +msgid ", using command %s" msgstr "" -#: ../../standalone/draksplash:1 -#, fuzzy, c-format -msgid "Generating preview ..." -msgstr "Визначаю пристро╖..." - -#: ../../standalone/draksplash:1 -#, fuzzy, c-format -msgid "You must choose an image file first!" -msgstr "Введ╕ть URI пристрою принтера" - -#: ../../standalone/draksplash:1 -#, fuzzy, c-format -msgid "ProgressBar color selection" -msgstr "Виб╕р модел╕ принтера" - -#: ../../standalone/draksplash:1 +#: ../../keyboard.pm:1 #, c-format -msgid "This theme does not yet have a bootsplash in %s !" +msgid "Alt and Shift keys simultaneously" msgstr "" -#: ../../standalone/draksplash:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "saving Bootsplash theme..." +msgid "Flags" msgstr "" -#: ../../standalone/draksplash:1 -#, fuzzy, c-format -msgid "choose image file" -msgstr "Вибер╕ть файл" - -#: ../../standalone/draksplash:1 -#, fuzzy, c-format -msgid "choose image" -msgstr "Вибер╕ть файл" - -#: ../../standalone/draksplash:1 +#: ../../standalone/drakTermServ:1 #, fuzzy, c-format -msgid "Configure bootsplash picture" -msgstr "Настро╖ти серв╕си" +msgid "Add/Del Users" +msgstr "Додати користувача" -#: ../../standalone/draksplash:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Make kernel message quiet by default" +msgid "Host/network IP address missing." msgstr "" -#: ../../standalone/draksplash:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Display logo on Console" +msgid "weekly" msgstr "" -#: ../../standalone/draksplash:1 -#, fuzzy, c-format -msgid "Choose color" -msgstr "Вибер╕ть тип мон╕тору" +#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1 +#, c-format +msgid "Settings" +msgstr "Параметри" -#: ../../standalone/draksplash:1 -#, fuzzy, c-format -msgid "Save theme" -msgstr "Встановити систему" +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "The entered host/network IP is not correct.\n" +msgstr "" -#: ../../standalone/draksplash:1 +#: ../../any.pm:1 #, fuzzy, c-format -msgid "Preview" -msgstr "пристр╕й" +msgid "Here is the full list of available countries" +msgstr "Тут наведено повний список наявних клав╕атур" -#: ../../standalone/draksplash:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "the color of the progress bar" -msgstr "" +msgid "Alternative test page (A4)" +msgstr "Додаткова тестова стор╕нка (A4)" -#: ../../standalone/draksplash:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "the height of the progress bar" +msgid "" +"If you have all the CDs in the list below, click Ok.\n" +"If you have none of those CDs, click Cancel.\n" +"If only some CDs are missing, unselect them, then click Ok." msgstr "" +"Якщо Ви ма╓те вс╕ компакт-диски з поданих вище, натисн╕ть на \"Гаразд\".\n" +"Якщо Ви не ма╓те жодного з поданих вище, натисн╕ть на \"В╕дм╕нити\".\n" +"Якщо т╕льки деяких компакт-диск╕в не вистача╓, в╕дм╕н╕ть ╖х виб╕р, ╕\n" +"натисн╕ть \"Гаразд\" п╕сля цього.\" " -#: ../../standalone/draksplash:1 +#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format -msgid "the width of the progress bar" +msgid "Wait please" msgstr "" -#: ../../standalone/draksplash:1 +#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format +msgid "PAP" +msgstr "PAP" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Backup user files" +msgstr "Поганий резервний файл" + +#: ../../diskdrake/dav.pm:1 +#, fuzzy, c-format +msgid "New" +msgstr "новий" + +#: ../../help.pm:1 +#, fuzzy, c-format msgid "" -"the progress bar y coordinate\n" -"of its upper left corner" +"This is the most crucial decision point for the security of your GNU/Linux\n" +"system: you have to enter the \"root\" password. \"Root\" is the system\n" +"administrator and is the only user authorized to make updates, add users,\n" +"change the overall system configuration, and so on. In short, \"root\" can\n" +"do everything! That is why you must choose a password that is difficult to\n" +"guess - DrakX will tell you if the password that you chose too easy. As you\n" +"can see, you are not forced to enter a password, but we strongly advise you\n" +"against this. GNU/Linux is just as prone to operator error as any other\n" +"operating system. Since \"root\" can overcome all limitations and\n" +"unintentionally erase all data on partitions by carelessly accessing the\n" +"partitions themselves, it is important that it be difficult to become\n" +"\"root\".\n" +"\n" +"The password should be a mixture of alphanumeric characters and at least 8\n" +"characters long. Never write down the \"root\" password -- it makes it far\n" +"too easy to compromise a system.\n" +"\n" +"One caveat -- do not make the password too long or complicated because you\n" +"must be able to remember it!\n" +"\n" +"The password will not be displayed on screen as you type it in. To reduce\n" +"the chance of a blind typing error you will need to enter the password\n" +"twice. If you do happen to make the same typing error twice, this\n" +"``incorrect'' password will be the one you will have use the first time you\n" +"connect.\n" +"\n" +"If you wish access to this computer to be controlled by an authentication\n" +"server, click the \"%s\" button.\n" +"\n" +"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" +"services, select the appropriate one for \"%s\". If you do not know which\n" +"one to use, you should ask your network administrator.\n" +"\n" +"If you happen to have problems with remembering passwords, if your computer\n" +"will never be connected to the internet or that you absolutely trust\n" +"everybody who uses your computer, you can choose to have \"%s\"." msgstr "" +"Наступне - найб╕льш вашливий крок з точки зору безпеки Вашо╖ системи\n" +"GNU/Linux: виб╕р пароля для користувача Root. Root - це системний\n" +"адм╕н╕стратор ╕ ╓дина особа, як╕й дозволено робити поновлення системи,\n" +"додавати користувач╕в, зм╕нювати загальну конф╕╜урац╕ю системи, таке\n" +"╕нше. Коротше - Root може все! Ось чому Вам сл╕д вибирати пароль, який\n" +"важко вгадати, drakX скаже Вам, якщо пароль занадто легкий. Як\n" +"показано, Вам необов'язково вводити пароль, але ми наст╕йливо\n" +"рекоменду╓мо Вам все-таки вибрати пароль, хоча б з одн╕╓╖-╓жино╖\n" +"причини: не думайте, що через те, що Ви завантажили GNU/Linux, Ваша\n" +"система в╕льна в╕д помилок. Це не так, оск╕льки Root може переважити\n" +"вс╕ заборони ╕ ненароком стерти вс╕ дан╕ на всих п╕дрозд╕лах\n" +"звертаючись безпосередньо до п╕дрозд╕л╕в! Тому, доступ до рахунку root\n" +"ма╓ бути захищеним.\n" +"\n" +"Пароль ма╓ бути сум╕шшю алфав╕тно-цифрових символ╕в ╕ бути завдовжки\n" +"хоча-б 8 символ╕в. Н╕коли не записуйте пароль!\n" +"\n" +"Не вибирайте занадто довгий чи складний пароль. Вам його\n" +"запам'ятовувати.\n" +"\n" +"Коли Ви будете друкувати пароль на екран╕, його не буде видно. Ось\n" +"чому при вибор╕ пароля, Вам запропону╓ться ввести його дв╕ч╕, оск╕льки\n" +"помилка при першому введенн╕ пароля, може бути проблемою: при\n" +"ре╓страц╕╖ в систем╕ Вам треба буде користуватись \"нев╕рним\" паролем.\n" +"\n" +"В експертному режим╕, у Вас буде можлив╕сть вказати, чи Ви будете\n" +"користуватися яким-небудь сервером автентикац╕╖: NIS чи LDAP.\n" +"\n" +"Якщо Ви користу╓тесь NIS'ом (чи LDAP) вибер╕ть опц╕ю \"Користуватись\n" +"NIS'ом\" (\"LDAP\"). Якщо Ви не зна╓те цього, запитайте в свого\n" +"системного адм╕н╕стратора.\n" +"\n" +"Якщо комп'ютер не п╕дключений до мереж╕, вибер╕ть Локальн╕ файли дли\n" +"автентикац╕╖.." -#: ../../standalone/draksplash:1 -#, c-format +#: ../../help.pm:1 +#, fuzzy, c-format msgid "" -"the progress bar x coordinate\n" -"of its upper left corner" +"At this point, DrakX will allow you to choose the security level desired\n" +"for the machine. As a rule of thumb, the security level should be set\n" +"higher if the machine will contain crucial data, or if it will be a machine\n" +"directly exposed to the Internet. The trade-off of a higher security level\n" +"is generally obtained at the expense of ease of use.\n" +"\n" +"If you do not know what to choose, stay with the default option." msgstr "" +"Тепер час вибрати р╕вень доступу (безпеки) для Вашо╖ системи. Золоте\n" +"правило: чим ширше коло доступу ма╓ машина, ╕ чим важлив╕ш╕ дан╕, що в\n" +"н╕й збер╕гаються, тим вищим ма╓ бути р╕вень безпеки системи. Але в\n" +"б╕льшост╕ випадк╕в, вищий р╕вень безпеки досяга╓ться за рахунок\n" +"додаткових незручностей в користуванн╕. Додаткову ╕нформац╕ю з цього\n" +"питання можна отримати з секц╕╖ MSEC в Дов╕дковому Пос╕бнику.\n" +"\n" +"Якщо Ви не зна╓те, на чому зупинитись, залиште все як ╓." -#: ../../standalone/draksplash:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "text box height" -msgstr "" +msgid "Load from floppy" +msgstr "В╕дновити з дискети" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "The following printer was auto-detected. " +msgstr "Ц╕ пакети будуть де╕нстальованими" -#: ../../standalone/draksplash:1 +#: ../../standalone/drakTermServ:1 #, c-format -msgid "text width" +msgid "Boot Floppy" msgstr "" -#: ../../standalone/draksplash:1 +#: ../../keyboard.pm:1 #, c-format -msgid "" -"y coordinate of text box\n" -"in number of characters" -msgstr "" +msgid "Norwegian" +msgstr "Норвезька" -#: ../../standalone/draksplash:1 +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "Searching for new scanners ..." +msgstr "Локальний принтер" + +#: ../../standalone/logdrake:1 #, c-format -msgid "" -"x coordinate of text box\n" -"in number of characters" +msgid "Apache World Wide Web Server" msgstr "" -#: ../../standalone/draksplash:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "Browse" +msgid "stepping of the cpu (sub model (generation) number)" msgstr "" -#: ../../standalone/draksplash:1 -#, fuzzy, c-format -msgid "Theme name" -msgstr "Назва ресурсу" - -#: ../../standalone/draksplash:1 +#: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "final resolution" -msgstr "Розд╕льна здатн╕сть" +msgid "select path to restore (instead of /)" +msgstr "Який тип миш╕ ви ма╓те?" #: ../../standalone/draksplash:1 #, fuzzy, c-format -msgid "first step creation" -msgstr "створення завантажувального диску" +msgid "Configure bootsplash picture" +msgstr "Настро╖ти серв╕си" -#: ../../standalone/draksplash:1 +#: ../../lang.pm:1 #, c-format -msgid "" -"package 'ImageMagick' is required to be able to complete configuration.\n" -"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit" -msgstr "" +msgid "China" +msgstr "Китай" -#: ../../standalone/drakxtv:1 -#, c-format -msgid "" -"No TV Card has been detected on your machine. Please verify that a Linux-" -"supported Video/TV Card is correctly plugged in.\n" -"\n" -"\n" -"You can visit our hardware database at:\n" -"\n" -"\n" -"http://www.linux-mandrake.com/en/hardware.php3" -msgstr "" +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid " (Make sure that all your printers are connected and turned on).\n" +msgstr "Вибер╕ть до якого посл╕довного порта п╕дключений Ваш модем?" -#: ../../standalone/drakxtv:1 +#: ../../lang.pm:1 #, c-format -msgid "No TV Card detected!" -msgstr "" +msgid "Georgia" +msgstr "Груз╕я" -#: ../../standalone/drakxtv:1 -#, c-format -msgid "Now, you can run xawtv (under X Window!) !\n" -msgstr "" +#: ../../standalone/printerdrake:1 +#, fuzzy, c-format +msgid "Reading data of installed printers..." +msgstr "Локальний принтер" -#: ../../standalone/drakxtv:1 -#, c-format -msgid "Have a nice day!" -msgstr "" +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid " Erase Now " +msgstr "Перенести" -#: ../../standalone/drakxtv:1 +#: ../../fsedit.pm:1 #, c-format -msgid "XawTV isn't installed!" -msgstr "" +msgid "server" +msgstr "сервер" -#: ../../standalone/drakxtv:1 -#, fuzzy, c-format -msgid "There was an error while scanning for TV channels" -msgstr "Сталася помилка п╕д час установки пакет╕в: " +#: ../../install_any.pm:1 +#, c-format +msgid "Insert a FAT formatted floppy in drive %s" +msgstr "Вставте дискету в╕дформатовану у FAT в дисков╕д %s" -#: ../../standalone/drakxtv:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "Scanning for TV channels" +msgid "yes means the processor has an arithmetic coprocessor" msgstr "" -#: ../../standalone/drakxtv:1 +#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1 #, c-format -msgid "Scanning for TV channels in progress ..." -msgstr "" +msgid "Please Wait... Applying the configuration" +msgstr "Зачекайте, будь ласка. Тестування конф╕╜урац╕╖" -#: ../../standalone/drakxtv:1 +# NOTE: this message will be displayed by grub at boot time; that is +# using the BIOS font; that means cp437 charset on 99.99% of PC computers +# out there. It is the nsuggested that for non latin languages an ascii +# transliteration be used; or maybe the english text be used; as it is best +# +# The lines must fit on screen, aka length < 80 +# and only one line per string for the GRUB messages +# +#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) +#. -PO: and keep them smaller than 79 chars long +#: ../../bootloader.pm:1 #, c-format -msgid "Area:" -msgstr "" +msgid "Welcome to GRUB the operating system chooser!" +msgstr "Laskavo prosymo do prohramy vyboru operacijnoyi systemy GRUB!" -#: ../../standalone/drakxtv:1 +#: ../../bootloader.pm:1 #, c-format -msgid "TV norm:" -msgstr "" +msgid "Grub" +msgstr "Grub" -#: ../../standalone/drakxtv:1 +#: ../../harddrake/data.pm:1 #, c-format -msgid "" -"Please,\n" -"type in your tv norm and country" +msgid "SCSI controllers" msgstr "" -#: ../../standalone/drakxtv:1 +#: ../../printer/main.pm:1 #, c-format -msgid "Australian Optus cable TV" +msgid " on LPD server \"%s\", printer \"%s\"" msgstr "" -#: ../../standalone/drakxtv:1 +#: ../../standalone/drakedm:1 #, c-format -msgid "Newzealand" +msgid "Choosing a display manager" msgstr "" -#: ../../standalone/drakxtv:1 -#, fuzzy, c-format -msgid "France [SECAM]" -msgstr "Франц╕я" - -#: ../../standalone/drakxtv:1 -#, fuzzy, c-format -msgid "East Europe" -msgstr "╢вропа" - -#: ../../standalone/drakxtv:1 +#: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, fuzzy, c-format -msgid "West Europe" -msgstr "╢вропа" - -#: ../../standalone/drakxtv:1 -#, c-format -msgid "China (broadcast)" -msgstr "" +msgid "Zeroconf Host name" +msgstr "Назва хоста" -#: ../../standalone/drakxtv:1 +#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1 #, c-format -msgid "Japan (cable)" -msgstr "" +msgid "IP address should be in format 1.2.3.4" +msgstr "IP адреса ма╓ бути у формат╕ 1.2.3.4" -#: ../../standalone/drakxtv:1 +#: ../../lang.pm:1 #, c-format -msgid "Japan (broadcast)" -msgstr "" +msgid "Ecuador" +msgstr "Еквадор" -#: ../../standalone/drakxtv:1 +#: ../../standalone/drakautoinst:1 #, fuzzy, c-format -msgid "Canada (cable)" -msgstr "Канадська (Квебек)" +msgid "Add an item" +msgstr "Додати користувача" -#: ../../standalone/drakxtv:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "USA (cable-hrc)" +msgid "The printers on this machine are available to other computers" msgstr "" -#: ../../standalone/drakxtv:1 +#: ../../standalone/drakautoinst:1 #, c-format -msgid "USA (cable)" -msgstr "" +msgid "I can't find needed image file `%s'." +msgstr "Не можу знайти потр╕бний файл ╕з зображенням `%s'" -#: ../../standalone/drakxtv:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "USA (broadcast)" +msgid "No sound card detected. Try \"harddrake\" after installation" msgstr "" -#: ../../standalone/drakxtv:1 +#: ../../network/drakfirewall.pm:1 #, c-format msgid "" -"XawTV isn't installed!\n" -"\n" -"\n" -"If you do have a TV card but DrakX has neither detected it (no bttv nor " -"saa7134\n" -"module in \"/etc/modules\") nor installed xawtv, please send the\n" -"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n" -"with subject \"undetected TV card\".\n" -"\n" -"\n" -"You can install it by typing \"urpmi xawtv\" as root, in a console." +"Invalid port given: %s.\n" +"The proper format is \"port/tcp\" or \"port/udp\", \n" +"where port is between 1 and 65535." msgstr "" -#: ../../standalone/harddrake2:1 +#: ../../any.pm:1 #, c-format -msgid "primary" -msgstr "" +msgid "Shell" +msgstr "Командна оболонка" -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "secondary" -msgstr "%d секунд" +#: ../../network/isdn.pm:1 +#, c-format +msgid "PCI" +msgstr "PCI" -#: ../../standalone/harddrake2:1 +#: ../../lang.pm:1 #, c-format -msgid "" -"Click on a device in the left tree in order to display its information here." +msgid "Sao Tome and Principe" +msgstr "Сан-Томе ╕ Пр╕нс╕п╕" + +#: ../../diskdrake/smbnfs_gtk.pm:1 +#, c-format +msgid "Can't login using username %s (bad password?)" msgstr "" -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "Unknown" -msgstr "Нев╕дома модель" +#: ../../keyboard.pm:1 +#, c-format +msgid "Azerbaidjani (latin)" +msgstr "Азербайджанська (латина)" -#: ../../standalone/harddrake2:1 +#: ../../standalone/drakbug:1 #, fuzzy, c-format -msgid "unknown" -msgstr "Нев╕дома модель" +msgid "Package not installed" +msgstr "Вийти з установки" -#: ../../standalone/harddrake2:1 +#: ../../share/advertising/12-mdkexpert.pl:1 #, fuzzy, c-format -msgid "Running \"%s\" ..." -msgstr "Стираю принтер \"%s\" ..." +msgid "Become a MandrakeExpert" +msgstr "експерт" -#: ../../standalone/harddrake2:1 +#: ../../lang.pm:1 #, c-format -msgid "Run config tool" -msgstr "" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "Configure module" -msgstr "Сконф╕гуруйте мишу" +msgid "American Samoa" +msgstr "Американська Самоа" -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "Information" -msgstr "Показ ╕нформац╕╖" +#: ../../standalone/drakconnect:1 +#, c-format +msgid "Protocol" +msgstr "Протокол" -#: ../../standalone/harddrake2:1 +#: ../../standalone/drakfont:1 #, fuzzy, c-format -msgid "Detected hardware" -msgstr "Перегляньте ╕нформац╕ю про апаратне забезпечення" +msgid "Copy fonts on your system" +msgstr "У Ваш╕й систем╕ нема╓ адаптера мереж╕!" #: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "Harddrake2 version " -msgstr "Визначення типу диску" +#, c-format +msgid "Harddrake help" +msgstr "" #: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "Detection in progress" -msgstr "знайдено на порту %s" +#, c-format +msgid "Bogomips" +msgstr "" -#: ../../standalone/harddrake2:1 +#: ../../standalone/drakTermServ:1 #, fuzzy, c-format -msgid "Author:" -msgstr "Автотест" +msgid "Mandrake Terminal Server Configuration" +msgstr "Перен╕с конф╕гурац╕╖ принтер╕в " -#: ../../standalone/harddrake2:1 +#: ../../standalone/drakbackup:1 #, c-format msgid "" -"This is HardDrake, a Mandrake hardware configuration tool.\n" -"Version:" +"\n" +" DrakBackup Report Details\n" +"\n" +"\n" msgstr "" -#: ../../standalone/harddrake2:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "About Harddrake" +msgid "Restore all backups" msgstr "" -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "/_About..." -msgstr "/П╕дказка/Про..." - -#: ../../standalone/harddrake2:1 +#: ../../security/help.pm:1 #, c-format -msgid "/_Report Bug" -msgstr "/_R Пов╕домити про помилку" +msgid "if set to yes, check open ports." +msgstr "" -#: ../../standalone/harddrake2:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "" -"Once you've selected a device, you'll be able to see the device information " -"in fields displayed on the right frame (\"Information\")" +msgid "This may take a moment to erase the media." msgstr "" -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "Select a device !" -msgstr "Вибер╕ть граф╕чну плату" +#: ../../install_steps_gtk.pm:1 +#, c-format +msgid "You can't select/unselect this package" +msgstr "Не можна вибрати або в╕дм╕нити виб╕р цього пакету." -#: ../../standalone/harddrake2:1 +#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1 +#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1 +#, c-format +msgid "Warning" +msgstr "Попередження" + +#: ../../standalone/drakbackup:1 #, c-format msgid "" -"Description of the fields:\n" "\n" +"- Other Files:\n" msgstr "" -#: ../../standalone/harddrake2:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Harddrake help" -msgstr "" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "/_Fields description" -msgstr "Опис" +msgid "Remote host name" +msgstr "Назва в╕ддаленого хоста" -#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 +#: ../../standalone/drakconnect:1 #, c-format -msgid "/_Help" -msgstr "/П╕дказка" +msgid "deactivate now" +msgstr "деактив╕зувати зараз" -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "/_Quit" -msgstr "Вих╕д" +#: ../../any.pm:1 +#, c-format +msgid "access to X programs" +msgstr "" -#: ../../standalone/harddrake2:1 +#: ../../install_interactive.pm:1 #, fuzzy, c-format -msgid "/Autodetect _jazz drives" -msgstr "Користуватися автовизначенням" +msgid "Computing the size of the Windows partition" +msgstr "Використовувати в╕льний прост╕р на п╕дрозд╕л╕ Windows" -#: ../../standalone/harddrake2:1 +#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 +#: ../../standalone/drakxtv:1 #, fuzzy, c-format -msgid "/Autodetect _modems" -msgstr "Користуватися автовизначенням" +msgid "Italy" +msgstr "╤тал╕йська" -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "/Autodetect _printers" -msgstr "Користуватися автовизначенням" +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Name of printer" +msgstr "Назва принтера" -#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 +#: ../../standalone/drakgw:1 #, c-format -msgid "/_Options" -msgstr "/Параметри" +msgid "disable" +msgstr "заборонити" -#: ../../standalone/harddrake2:1 +#: ../../fs.pm:1 ../../partition_table.pm:1 #, c-format -msgid "the vendor name of the processor" -msgstr "" +msgid "error unmounting %s: %s" +msgstr "помилка розмонтування %s: %s" -#: ../../standalone/harddrake2:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "the vendor name of the device" -msgstr "" +msgid "Do it!" +msgstr "Виконати!" -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "The type of bus on which the mouse is connected" -msgstr "Вибер╕ть до якого посл╕довного порту при╓днано мишу?" +#: ../../lang.pm:1 +#, c-format +msgid "Cayman Islands" +msgstr "Кайманськ╕ острови" -#: ../../standalone/harddrake2:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Stepping of the cpu (sub model (generation) number)" +msgid "%s not responding" msgstr "" -#: ../../standalone/harddrake2:1 +#: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "Model stepping" -msgstr "форматування" +msgid "Select model manually" +msgstr "Назва в╕ддаленого принтер" -#: ../../standalone/harddrake2:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "the number of the processor" -msgstr "" +msgid "Format" +msgstr "Форматувати" -#: ../../standalone/harddrake2:1 +#: ../../network/adsl.pm:1 #, c-format -msgid "Processor ID" +msgid "" +"The most common way to connect with adsl is pppoe.\n" +"Some connections use pptp, a few use dhcp.\n" +"If you don't know, choose 'use pppoe'" msgstr "" +"Найб╕льш поширений спос╕б з'╓днання через adsl - це за допомогою\n" +"pppoe. Однак, деяк╕ з'╓днання користуються т╕льки pptp, невелика\n" +"к╕льк╕сть користу╓ться dhcp. Якщо Ви не зна╓те напевне вибер╕ть\n" +"\"вживати pppoe\"." -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "network printer port" -msgstr "Принтер в мереж╕ (сокет)" +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Various" +msgstr "Р╕зноман╕тне" -#: ../../standalone/harddrake2:1 +#: ../../harddrake/data.pm:1 #, c-format -msgid "the name of the CPU" +msgid "Zip" msgstr "" -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "Name" -msgstr "Назва: " - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "the number of buttons the mouse has" -msgstr "Двох кнопочна" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "Number of buttons" -msgstr "Двох кнопочна" +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "" +"\n" +"\n" +"Printerdrake could not determine which model your printer %s is. Please " +"choose the correct model from the list." +msgstr "" -#: ../../standalone/harddrake2:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Official vendor name of the cpu" +msgid "" +"\n" +"Mark the printers which you want to transfer and click \n" +"\"Transfer\"." msgstr "" +"\n" +"Позначте принтери для переносу ╕ натисн╕ть на \"Перенести\"." -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "Model name" -msgstr "Назва модуля" +#: ../../printer/data.pm:1 +#, c-format +msgid "PDQ" +msgstr "PDQ" -#: ../../standalone/harddrake2:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)" -msgstr "" +msgid "Albanian" +msgstr "Албанська" -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "Model" -msgstr "Модуль" +#: ../../lang.pm:1 +#, c-format +msgid "Lithuania" +msgstr "Литва" + +#: ../../any.pm:1 +#, c-format +msgid "Compact" +msgstr "Компактний" -#: ../../standalone/harddrake2:1 +#: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "hard disk model" -msgstr "Пам'ять картки (DMA)" +msgid "Detected model: %s %s" +msgstr "знайдено %s" -#: ../../standalone/harddrake2:1 +#: ../../share/advertising/03-software.pl:1 #, c-format -msgid "class of hardware device" +msgid "MandrakeSoft has selected the best software for you" msgstr "" #: ../../standalone/harddrake2:1 #, c-format -msgid "Media class" +msgid "" +"This is HardDrake, a Mandrake hardware configuration tool.\n" +"Version: %s\n" +"Author: Thierry Vignaud \n" +"\n" msgstr "" -#: ../../standalone/harddrake2:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "Sub generation of the cpu" -msgstr "" - -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "Level" -msgstr "р╕вень" +msgid "Local files" +msgstr "Локальн╕ файли" -#: ../../standalone/harddrake2:1 +#: ../../pkgs.pm:1 #, c-format -msgid "Format of floppies supported by the drive" -msgstr "" +msgid "maybe" +msgstr "можливо" -#: ../../standalone/harddrake2:1 -#, fuzzy, c-format -msgid "Floppy format" -msgstr "Форматувати" +#: ../../lang.pm:1 +#, c-format +msgid "Panama" +msgstr "Панама" -#: ../../standalone/harddrake2:1 +#: ../../Xconfig/various.pm:1 #, c-format msgid "" -"Some of the early i486DX-100 chips cannot reliably return to operating mode " -"after the \"halt\" instruction is used" +"Your graphic card seems to have a TV-OUT connector.\n" +"It can be configured to work using frame-buffer.\n" +"\n" +"For this you have to plug your graphic card to your TV before booting your " +"computer.\n" +"Then choose the \"TVout\" entry in the bootloader\n" +"\n" +"Do you have this feature?" msgstr "" -#: ../../standalone/harddrake2:1 +#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1 #, c-format -msgid "Halt bug" -msgstr "" +msgid "Monitor" +msgstr "Мон╕тор" -#: ../../standalone/harddrake2:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode" +msgid "" +"You are about to set up printing to a Windows account with password. Due to " +"a fault in the architecture of the Samba client software the password is put " +"in clear text into the command line of the Samba client used to transmit the " +"print job to the Windows server. So it is possible for every user on this " +"machine to display the password on the screen by issuing commands as \"ps " +"auxwww\".\n" +"\n" +"We recommend to make use of one of the following alternatives (in all cases " +"you have to make sure that only machines from your local network have access " +"to your Windows server, for example by means of a firewall):\n" +"\n" +"Use a password-less account on your Windows server, as the \"GUEST\" account " +"or a special account dedicated for printing. Do not remove the password " +"protection from a personal account or the administrator account.\n" +"\n" +"Set up your Windows server to make the printer available under the LPD " +"protocol. Then set up printing from this machine with the \"%s\" connection " +"type in Printerdrake.\n" +"\n" msgstr "" -#: ../../standalone/harddrake2:1 +#: ../../Xconfig/resolution_and_depth.pm:1 #, c-format -msgid "F00f bug" -msgstr "" +msgid "65 thousand colors (16 bits)" +msgstr "65 тисяч кольор╕в (16 б╕т)" -#: ../../standalone/harddrake2:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "yes means the arithmetic coprocessor has an exception vector attached" +msgid "" +"\n" +"- Save on Hard drive on path: %s\n" msgstr "" -#: ../../standalone/harddrake2:1 +#: ../../install_steps_gtk.pm:1 #, c-format -msgid "Whether the FPU has an irq vector" -msgstr "" +msgid "Size: %d KB\n" +msgstr "Розм╕р: %d КБ\n" -#: ../../standalone/harddrake2:1 +#: ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "Remove fonts on your system" +msgstr "У Ваш╕й систем╕ нема╓ адаптера мереж╕!" + +#: ../../standalone/drakgw:1 #, c-format -msgid "yes means the processor has an arithmetic coprocessor" +msgid "" +"Warning, the network adapter (%s) is already configured.\n" +"\n" +"Do you want an automatic re-configuration?\n" +"\n" +"You can do it manually but you need to know what you're doing." msgstr "" +#: ../../Xconfig/various.pm:1 +#, c-format +msgid "Graphical interface at startup" +msgstr "Стартувати X автоматично" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Please enter the directory to save:" +msgstr "Випробуйте мишку, будь-ласка" + #: ../../standalone/harddrake2:1 #, c-format -msgid "Is FPU present" +msgid "format of floppies supported by the drive" msgstr "" -#: ../../standalone/harddrake2:1 +#: ../../raid.pm:1 #, c-format +msgid "Not enough partitions for RAID level %d\n" +msgstr "Недостатньо п╕дрозд╕л╕в для RAID р╕вня %d\n" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format msgid "" -"Early Intel Pentium chips manufactured have a bug in their floating point " -"processor which did not achieve the required precision when performing a " -"Floating point DIVision (FDIV)" +"The following printers are configured. Double-click on a printer to change " +"its settings; to make it the default printer; or to view information about " +"it." msgstr "" +"Так╕ принтери вже сконф╕╜урован╕.\n" +"Ви можете або додати ще деяк╕, або зм╕нити т╕, що вже ╕снують." -#: ../../standalone/harddrake2:1 +#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format -msgid "Fdiv bug" -msgstr "" +msgid "Connected" +msgstr "З'╓днано" -#: ../../standalone/harddrake2:1 +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "USB printer \\#%s" +msgstr "Нема╓ принтера" + +#: ../../keyboard.pm:1 #, c-format -msgid "CPU flags reported by the kernel" -msgstr "" +msgid "Macedonian" +msgstr "Македонська" -#: ../../standalone/harddrake2:1 +#: ../../harddrake/data.pm:1 #, c-format -msgid "Flags" +msgid "Bridges and system controllers" msgstr "" -#: ../../standalone/harddrake2:1 +#: ../../standalone/logdrake:1 #, c-format -msgid "the module of the GNU/Linux kernel that handles the device" -msgstr "" +msgid "/File/_Save" +msgstr "/Файл/За_писати" -#: ../../standalone/harddrake2:1 +#: ../../lang.pm:1 #, c-format -msgid "Module" -msgstr "Модуль" +msgid "Mali" +msgstr "Мал╕" -#: ../../standalone/harddrake2:1 +#: ../../install_steps_gtk.pm:1 +#, fuzzy, c-format +msgid "No details" +msgstr "Подробиц╕" + +#: ../../pkgs.pm:1 #, c-format -msgid "new dynamic device name generated by core kernel devfs" -msgstr "" +msgid "very nice" +msgstr "дуже гарний" -#: ../../standalone/harddrake2:1 +#: ../../standalone/draksplash:1 #, fuzzy, c-format -msgid "New devfs device" -msgstr "Шлюзовий пристр╕й" +msgid "Preview" +msgstr "пристр╕й" -#: ../../standalone/harddrake2:1 +#: ../../standalone/drakbug:1 +#, fuzzy, c-format +msgid "Remote Control" +msgstr "В╕ддалений принтер" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Please select media for backup..." +msgstr "Вибер╕ть, будь-ласка, мову." + +#: ../../Xconfig/various.pm:1 #, c-format -msgid "old static device name used in dev package" -msgstr "" +msgid "XFree86 server: %s\n" +msgstr "X сервер: %s\n" -#: ../../standalone/harddrake2:1 +#: ../../standalone/drakTermServ:1 #, fuzzy, c-format -msgid "Old device file" -msgstr "Вибер╕ть файл" +msgid "Allow Thin Clients" +msgstr "Кл╕╓нт DHCP" -#: ../../standalone/harddrake2:1 +#: ../../keyboard.pm:1 #, c-format -msgid "This field describes the device" -msgstr "" +msgid "Georgian (\"Russian\" layout)" +msgstr "Грузинська (рос╕йська розкладка)" -#: ../../standalone/harddrake2:1 +#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 +#, c-format +msgid "/_Options" +msgstr "/Параметри" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Your printer model" +msgstr "Назва в╕ддаленого принтер" + +#: ../../any.pm:1 #, c-format msgid "" -"The CPU frequency in MHz (Megahertz which in first approximation may be " -"coarsely assimilated to number of instructions the cpu is able to execute " -"per second)" +"\n" +"\n" +"(WARNING! You're using XFS for your root partition,\n" +"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n" +"because XFS needs a very large driver)." msgstr "" -#: ../../standalone/harddrake2:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Frequency (MHz)" +msgid "" +"\n" +"- Delete hard drive tar files after backup.\n" msgstr "" -#: ../../standalone/harddrake2:1 +#: ../../standalone/drakpxe:1 #, c-format -msgid "Information level that can be obtained through the cpuid instruction" +msgid "" +"No CD or DVD image found, please copy the installation program and rpm files." msgstr "" -#: ../../standalone/harddrake2:1 +#: ../../share/advertising/04-configuration.pl:1 #, fuzzy, c-format -msgid "Cpuid level" -msgstr "Встановлення р╕вня безпеки" +msgid "Mandrake's multipurpose configuration tool" +msgstr "Перен╕с конф╕гурац╕╖ принтер╕в " -#: ../../standalone/harddrake2:1 +#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1 +#: ../../standalone/logdrake:1 +#, fuzzy, c-format +msgid "Save" +msgstr "Статус" + +#: ../../standalone/scannerdrake:1 #, c-format -msgid "Family of the cpu (eg: 6 for i686 class)" +msgid "The %s is unsupported" msgstr "" -#: ../../standalone/harddrake2:1 +#: ../../services.pm:1 #, c-format -msgid "Cpuid family" -msgstr "" +msgid "Load the drivers for your usb devices." +msgstr "Завантажити драйвери для пристро╖в usb." -#: ../../standalone/harddrake2:1 +#: ../../harddrake/data.pm:1 +#, fuzzy, c-format +msgid "Disk" +msgstr "Датська" + +#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format -msgid "Whether this cpu has the Cyrix 6x86 Coma bug" -msgstr "" +msgid "Enter a printer device URI" +msgstr "Введ╕ть URI пристрою принтера" -#: ../../standalone/harddrake2:1 +#: ../../share/advertising/01-thanks.pl:1 #, c-format -msgid "Coma bug" +msgid "" +"The success of MandrakeSoft is based upon the principle of Free Software. " +"Your new operating system is the result of collaborative work of the " +"worldwide Linux Community." msgstr "" -#: ../../standalone/harddrake2:1 +#: ../../lang.pm:1 #, c-format -msgid "special capacities of the driver (burning ability and or DVD support)" -msgstr "" +msgid "Israel" +msgstr "╤зра╕ль" -#: ../../standalone/harddrake2:1 +#: ../../lang.pm:1 #, c-format -msgid "Drive capacity" -msgstr "" +msgid "French Guiana" +msgstr "Французька ╫аяна" -#: ../../standalone/harddrake2:1 +#: ../../lang.pm:1 #, c-format -msgid "Size of the (second level) cpu cache" -msgstr "" +msgid "default:LTR" +msgstr "default:LTR" -#: ../../standalone/harddrake2:1 +#: ../../standalone/drakperm:1 #, fuzzy, c-format -msgid "Cache size" -msgstr "розм╕р д╕лянки" +msgid "add a rule" +msgstr "Додати модуль" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "" -"- pci devices: this gives the PCI slot, device and function of this card\n" -"- eide devices: the device is either a slave or a master device\n" -"- scsi devices: the scsi bus and the scsi device ids" -msgstr "" +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "A command line must be entered!" +msgstr "Потр╕бно ввести коректний URI!" -#: ../../standalone/harddrake2:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Location on the bus" +msgid "Select user manually" msgstr "" -#: ../../standalone/harddrake2:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "" -"- PCI and USB devices: this lists the vendor, device, subvendor and " -"subdevice PCI/USB ids" -msgstr "" +msgid "Transfer printer configuration" +msgstr "Перен╕с конф╕гурац╕╖ принтер╕в " -#: ../../standalone/harddrake2:1 +#: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "Bus identification" -msgstr "Автентикац╕я" +msgid "Do you want to enable printing on the printers mentioned above?\n" +msgstr "Чи Ви хочете в╕дкривати з'╓днання при завантаженн╕ системи?" -#: ../../standalone/harddrake2:1 +#: ../../install_steps_interactive.pm:1 #, c-format msgid "" -"The GNU/Linux kernel needs to run a calculation loop at boot time to " -"initialize a timer counter. Its result is stored as bogomips as a way to " -"\"benchmark\" the cpu." -msgstr "" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Bogomips" +"For this to work for a W2K PDC, you will probably need to have the admin " +"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" +"add and reboot the server.\n" +"You will also need the username/password of a Domain Admin to join the " +"machine to the Windows(TM) domain.\n" +"If networking is not yet enabled, Drakx will attempt to join the domain " +"after the network setup step.\n" +"Should this setup fail for some reason and domain authentication is not " +"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) " +"Domain, and Admin Username/Password, after system boot.\n" +"The command 'wbinfo -t' will test whether your authentication secrets are " +"good." msgstr "" -#: ../../standalone/harddrake2:1 -#, c-format -msgid "EIDE/SCSI channel" -msgstr "" +#: ../../printer/main.pm:1 +#, fuzzy, c-format +msgid "%s (Port %s)" +msgstr "Порт" -#: ../../standalone/harddrake2:1 +#: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "Channel" -msgstr "В╕дм╕нити" +msgid "Use network connection to backup" +msgstr "Поганий резервний файл" -#: ../../standalone/harddrake2:1 +#: ../../security/help.pm:1 #, c-format msgid "" -"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" -msgstr "" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "Bus" -msgstr "" - -#: ../../standalone/harddrake2:1 -#, c-format -msgid "the list of alternative drivers for this sound card" +"Arguments: (arg)\n" +"\n" +" Enable/Disable sulogin(8) in single user level." msgstr "" -#: ../../standalone/harddrake2:1 +#: ../../help.pm:1 #, fuzzy, c-format -msgid "Alternative drivers" -msgstr "Додаткова тестова стор╕нка (A4)" +msgid "" +"It is now time to specify which programs you wish to install on your\n" +"system. There are thousands of packages available for Mandrake Linux, and\n" +"to make it simpler to manage the packages have been placed into groups of\n" +"similar applications.\n" +"\n" +"Packages are sorted into groups corresponding to a particular use of your\n" +"machine. Mandrake Linux has four predefined installations available. You\n" +"can think of these installation classes as containers for various packages.\n" +"You can mix and match applications from the various groups, so a\n" +"``Workstation'' installation can still have applications from the\n" +"``Development'' group installed.\n" +"\n" +" * \"%s\": if you plan to use your machine as a workstation, select one or\n" +"more of the applications that are in the workstation group.\n" +"\n" +" * \"%s\": if plan on using your machine for programming, choose the\n" +"appropriate packages from that group.\n" +"\n" +" * \"%s\": if your machine is intended to be a server, select which of the\n" +"more common services you wish to install on your machine.\n" +"\n" +" * \"%s\": this is where you will choose your preferred graphical\n" +"environment. At least one must be selected if you want to have a graphical\n" +"interface available.\n" +"\n" +"Moving the mouse cursor over a group name will display a short explanatory\n" +"text about that group. If you unselect all groups when performing a regular\n" +"installation (as opposed to an upgrade), a dialog will pop up proposing\n" +"different options for a minimal installation:\n" +"\n" +" * \"%s\": install the minimum number of packages possible to have a\n" +"working graphical desktop.\n" +"\n" +" * \"%s\": installs the base system plus basic utilities and their\n" +"documentation. This installation is suitable for setting up a server.\n" +"\n" +" * \"%s\": will install the absolute minimum number of packages necessary\n" +"to get a working Linux system. With this installation you will only have a\n" +"command line interface. The total size of this installation is about 65\n" +"megabytes.\n" +"\n" +"You can check the \"%s\" box, which is useful if you are familiar with the\n" +"packages being offered or if you want to have total control over what will\n" +"be installed.\n" +"\n" +"If you started the installation in \"%s\" mode, you can unselect all groups\n" +"to avoid installing any new package. This is useful for repairing or\n" +"updating an existing system." +msgstr "" +"Тепер час вибрати, як╕ програми Ви хочете мати в сво╖й\n" +"систем╕. Мандрейк Л╕накс ма╓ тисяч╕ програмних пакет╕в, ╕ Вам нема╓\n" +"необх╕дност╕ знати ╖х вс╕. \n" +"\n" +"Якщо Ви встановлю╓те систему ╕з стандартного компакт-диску, Вам\n" +"спочатку буде задане запитання, як╕ диски Ви ма╓те. Перев╕рте сво╖\n" +"компакт-диски, в╕дм╕тьте в╕дпов╕дн╕ пункти на екран╕ ╕ натисн╕ть\n" +"Гаразд.\n" +"\n" +"Пакети з╕бран╕ у групи пакет╕в, в╕дпов╕дно до конкретного вжитку для\n" +"машини.\n" +"\n" +"Групи пакет╕в розд╕лен╕ на чотири велик╕ розд╕ли:\n" +"\n" +"* Робоча станц╕я: якщо Ваша машина буде вживатися як робоча станц╕я,\n" +"вибер╕ть одну чи к╕лька в╕дпов╕дних груп.\n" +"\n" +"* Граф╕чн╕ середовища: Вибер╕ть граф╕чне середовище соб╕ до\n" +"вподоби. Вибер╕ть хоча б одне, якщо Ви хочете вживати машину як робочу\n" +"станц╕ю.\n" +"\n" +"* Розробка: вибер╕ть в╕дпов╕дн╕ групи, якщо ця машина буде вживатися\n" +"для програмування.\n" +"\n" +"* Сервер: нарешт╕, якщо машина буду╓ться для використання в якост╕\n" +"сервера, Ви можете вибрати найб╕льш розповсюджен╕ серв╕си, як╕ Ви\n" +"хочете бачити на сво╖й машин╕.\n" +"\n" +"Пересування курсора ╕ коротка зупинка над певним пунктом буде\n" +"висв╕чувати п╕дказку по дан╕й груп╕.\n" +"\n" +"Якщо Ви натиснете на кнопку Додатково, Ви будете мати можлив╕сть\n" +"вибрати окрем╕ пакети один по одному. Це зручно, якщо Ви добре зна╓те,\n" +"як╕ пакети встановлюються, або якщо Ви хочете мати повний контроль над\n" +"тим, що встановлю╓ться в систем╕. \n" +"\n" +"Якщо Ви почали установку в режим╕ \"Поновлення\", Ви можете в╕дм╕нити\n" +"виб╕р вс╕х груп щоб у систем╕ не встановлювались н╕як╕ нов╕ пакети ╕\n" +"т╕льки система поновилась. " -#: ../../standalone/keyboarddrake:1 +#: ../../any.pm:1 ../../help.pm:1 #, c-format -msgid "Do you want the BackSpace to return Delete in console?" -msgstr "Ви хочете щоб BackSpace давав Delete на консол╕?" +msgid "Accept user" +msgstr "Прийняти користувача" -#: ../../standalone/keyboarddrake:1 +#: ../../help.pm:1 ../../diskdrake/dav.pm:1 #, c-format -msgid "Please, choose your keyboard layout." -msgstr "Яка у Вас розкладка клав╕атури?" +msgid "Server" +msgstr "Сервер" -#: ../../standalone/livedrake:1 +#: ../../interactive/stdio.pm:1 #, c-format -msgid "Unable to start live upgrade !!!\n" -msgstr "Не можу стартувати \"живе поновлення\"!!!\n" +msgid "Bad choice, try again\n" +msgstr "Невдалий виб╕р, спробуйте ще раз\n" -#: ../../standalone/livedrake:1 +#: ../../lang.pm:1 #, fuzzy, c-format -msgid "" -"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n" -"If you don't have it, press Cancel to avoid live upgrade." -msgstr "" -"Будь-ласка, вставте компакт-диск, позначений \"%s\" у пристр╕й ╕\n" -"натисн╕ть Гаразд п╕сля цього.\n" -"\n" -"Якщо Ви не ма╓те такого диску, натисн╕ть В╕дм╕нити, щоб не\n" -"встановлювати з цього диску." +msgid "Heard and McDonald Islands" +msgstr "Хердськ╕ ╕ МакДональдськ╕ острови" -#: ../../standalone/livedrake:1 +#: ../../harddrake/sound.pm:1 #, c-format -msgid "Change Cd-Rom" -msgstr "Зм╕н╕ть компакт-диск" +msgid "No alternative driver" +msgstr "" -#: ../../standalone/localedrake:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "The change is done, but to be effective you must logout" -msgstr "" +msgid "Toggle to expert mode" +msgstr "Звичайний > Експерт" -#: ../../standalone/logdrake:1 +#: ../../printer/cups.pm:1 #, c-format -msgid "Save as.." -msgstr "Зберегти як.." +msgid "(on this machine)" +msgstr "(на ц╕й машин╕)" -#: ../../standalone/logdrake:1 +#: ../../network/network.pm:1 #, fuzzy, c-format -msgid "Please enter your email address below " -msgstr "Будь-ласка, спробуйте ще раз" +msgid "Gateway address should be in format 1.2.3.4" +msgstr "IP адреса ма╓ бути у формат╕ 1.2.3.4" + +#: ../../network/modem.pm:1 +#, c-format +msgid "" +"\"%s\" based winmodem detected, do you want to install needed software ?" +msgstr "" -#: ../../standalone/logdrake:1 +#: ../../install_steps_interactive.pm:1 #, fuzzy, c-format -msgid "alert configuration" -msgstr "Конф╕гурац╕я ╕нтернету" +msgid "Looking at packages already installed..." +msgstr "Виб╕р цього пакету неможливо в╕дм╕нити. Його вже встановлено." -#: ../../standalone/logdrake:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "You will receive an alert if the load is higher than this value" +msgid "Use Differential Backups" msgstr "" -#: ../../standalone/logdrake:1 -#, fuzzy, c-format -msgid "load setting" -msgstr "форматування" +#: ../../standalone/drakconnect:1 +#, c-format +msgid "Driver" +msgstr "Драйвер" -#: ../../standalone/logdrake:1 +#: ../../services.pm:1 #, c-format msgid "" -"You will receive an alert if one of the selected services is no longer " -"running" +"Linuxconf will sometimes arrange to perform various tasks\n" +"at boot-time to maintain the system configuration." msgstr "" +"Linuxconf у деяких випадках буде виконувати певн╕ процедури п╕д час\n" +"завантаження системи щоб забезпечити п╕дтримання ц╕л╕сност╕\n" +"конф╕╜урац╕╖ системи." -#: ../../standalone/logdrake:1 -#, fuzzy, c-format -msgid "service setting" -msgstr "ц╕каво" +#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 +#, c-format +msgid "Printer on remote lpd server" +msgstr "Принтер на в╕ддаленому сервер╕ lpd" -#: ../../standalone/logdrake:1 -#, fuzzy, c-format -msgid "Xinetd Service" -msgstr "Принтер сервер" +#: ../../standalone/drakfont:1 +#, c-format +msgid "" +"Before installing any fonts, be sure that you have the right to use and " +"install them on your system.\n" +"\n" +"-You can install the fonts the normal way. In rare cases, bogus fonts may " +"hang up your X Server." +msgstr "" -#: ../../standalone/logdrake:1 +#: ../../help.pm:1 #, fuzzy, c-format -msgid "Webmin Service" -msgstr "Сервер" +msgid "" +"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n" +"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n" +"detected and installed in the bootloader menu. If this is not the case, you\n" +"can add an entry by hand in this screen. Be careful to choose the correct\n" +"parameters.\n" +"\n" +"Yaboot's main options are:\n" +"\n" +" * Init Message: a simple text message displayed before the boot prompt.\n" +"\n" +" * Boot Device: indicates where you want to place the information required\n" +"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n" +"to hold this information.\n" +"\n" +" * Open Firmware Delay: unlike LILO, there are two delays available with\n" +"yaboot. The first delay is measured in seconds and at this point, you can\n" +"choose between CD, OF boot, MacOS or Linux;\n" +"\n" +" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" +"After selecting Linux, you will have this delay in 0.1 second increments\n" +"before your default kernel description is selected;\n" +"\n" +" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n" +"at the first boot prompt.\n" +"\n" +" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n" +"Open Firmware at the first boot prompt.\n" +"\n" +" * Default OS: you can select which OS will boot by default when the Open\n" +"Firmware Delay expires." +msgstr "" +"Yaboot - це завантажувач системи для Мак╕нтош╕в Нового типу. В╕н може\n" +"завантажувати будь-яку ╕з систем: GNU/Linux, MacOS, MacOSX, якщо в╕н\n" +"встановлений в систем╕. В б╕льшост╕ випадк╕в ц╕ системи в╕рно\n" +"визначаються ╕ встановлюються. Якщо це не так - можете додати пункт\n" +"вручну на цьому екран╕. Будьте уважн╕ при вибор╕ коректний\n" +"параметр╕в. \n" +"\n" +"Основн╕ параметри Yaboot:\n" +"\n" +" * Пов╕домлення при завантаженн╕: просте текстове пов╕домлення, яке\n" +"демонстру╓ться перед завантаженням.\n" +"\n" +" * Пристр╕й завантаження: вказу╓ на те, де саме запису╓ться\n" +"╕нформац╕я потр╕бна для завантаження GNU/Linux. Загалом, вам потр╕бно\n" +"назначити завантажувальний п╕дрозд╕л для того, щоб збер╕гати цю\n" +"╕нформац╕ю. \n" +"\n" +" * Затримка Open Firmware: на в╕дм╕ну в╕д Lilo, тут ╓ дв╕ р╕зних\n" +"пер╕оди затримки в Yaboot. Перший пер╕од затримки вим╕рю╓ться в\n" +"секундах. П╕д час цього пер╕оду затримки ви можете вибрати зв╕дки\n" +"завантажуватися: з компакт-диску, OF, MacOS чи Л╕накс.\n" +"\n" +" * Пер╕од затримки перед завантаженням ядра: цей пер╕од под╕бний до\n" +"затримки Lilo. П╕сля вибору Л╕накса, затримка обчислю╓ться в десятих\n" +"секунди перш, н╕ж почне завантажуватися стандартне ядро.\n" +"\n" +" * Дозволити завантаження з компакт-диску?: якщо цей параметр\n" +"вибрано, ви можете натиснути 'C' при завантаженн╕ п╕д час першого\n" +"пер╕оду затримки.\n" +"\n" +" * Дозволити завантаження OF: якщо ви виберете цей параметр, ви\n" +"зможете натиснути 'N' п╕д час першого пер╕оду затримки для\n" +"завантаження з Open Firmware.\n" +"\n" +" * Стандартна ОС: цим ви можете встановити стандартну систему, яка\n" +"завантажиться п╕сля того, як зак╕нчиться затримка Open Firmware." -#: ../../standalone/logdrake:1 -#, fuzzy, c-format -msgid "SSH Server" -msgstr "Сервер NIS" +#: ../../mouse.pm:1 +#, c-format +msgid "No mouse" +msgstr "Без мишки" -#: ../../standalone/logdrake:1 -#, fuzzy, c-format -msgid "Samba Server" -msgstr "Сервер NIS" +#: ../../crypto.pm:1 ../../lang.pm:1 +#, c-format +msgid "Germany" +msgstr "Н╕меччина" -#: ../../standalone/logdrake:1 +#: ../../crypto.pm:1 ../../lang.pm:1 #, fuzzy, c-format -msgid "Postfix Mail Server" -msgstr "Поштовий сервер postfix, сервер новин inn" +msgid "Austria" +msgstr "посл╕довний" -#: ../../standalone/logdrake:1 -#, fuzzy, c-format -msgid "Ftp Server" -msgstr "Сервер NIS" +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Run \"sndconfig\" after installation to configure your sound card" +msgstr "" -#: ../../standalone/logdrake:1 -#, fuzzy, c-format -msgid "Domain Name Resolver" -msgstr "Назва домену" +#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 +#, c-format +msgid "Collapse Tree" +msgstr "Стиснути дерево" -#: ../../standalone/logdrake:1 +#: ../../standalone/drakautoinst:1 #, c-format -msgid "Apache World Wide Web Server" -msgstr "" +msgid "Auto Install Configurator" +msgstr "Конф╕╜урац╕я автоматично╖ установки" -#: ../../standalone/logdrake:1 +#: ../../steps.pm:1 +#, c-format +msgid "Configure networking" +msgstr "Настро╖ти мережу" + +#: ../../any.pm:1 +#, c-format +msgid "Where do you want to install the bootloader?" +msgstr "Де ви хочете встановити стартовий блок?" + +#: ../../help.pm:1 #, fuzzy, c-format msgid "" -"Welcome to the mail configuration utility.\n" +"Your choice of preferred language will affect the language of the\n" +"documentation, the installer and the system in general. Select first the\n" +"region you are located in, and then the language you speak.\n" "\n" -"Here, you'll be able to set up the alert system.\n" +"Clicking on the \"%s\" button will allow you to select other languages to\n" +"be installed on your workstation, thereby installing the language-specific\n" +"files for system documentation and applications. For example, if you will\n" +"host users from Spain on your machine, select English as the default\n" +"language in the tree view and \"%s\" in the Advanced section.\n" +"\n" +"Note that you're not limited to choosing a single additional language. You\n" +"may choose several ones, or even install them all by selecting the \"%s\"\n" +"box. Selecting support for a language means translations, fonts, spell\n" +"checkers, etc. for that language will be installed. Additionally, the\n" +"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n" +"however that this is an experimental feature. If you select different\n" +"languages requiring different encoding the unicode support will be\n" +"installed anyway.\n" +"\n" +"To switch between the various languages installed on the system, you can\n" +"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n" +"language used by the entire system. Running the command as a regular user\n" +"will only change the language settings for that particular user." msgstr "" -"Ласкаво просимо до конф╕╜урац╕йно╖ програми для прокс╕.\n" +"Будь ласка, вибер╕ть мову для установку системи та користування п╕сля\n" +"установки. \n" "\n" -"Тут Ви можете встановити прокс╕ для протокол╕в ftp та http з паролем\n" -"чи без. \n" - -#: ../../standalone/logdrake:1 -#, fuzzy, c-format -msgid "Mail alert configuration" -msgstr "Конф╕гурац╕я ╕нтернету" +"Присутня також кнопка \"Додатково\", яка дозволя╓ Вам вибрати ╕нш╕ мови,\n" +"як╕ можуть бути також установленими в систем╕. Ви зможете\n" +"користуватися цими мовами п╕сля установки. Якщо, наприклад, на Ваш╕й\n" +"машин╕ (у яко╖ англ╕йська встановлена основною мовою) будуть працювати\n" +"╕спанц╕, вибер╕ть в додаткових мовах ╤спанська|╤спан╕я.\n" +"\n" +"П╕сля вибору мови ╕ п╕дтвердження, Ви автоматично переходите до\n" +"наступного кроку." -#: ../../standalone/logdrake:1 +#: ../../standalone/scannerdrake:1 #, c-format -msgid "Mail alert" +msgid "The %s is not supported by this version of Mandrake Linux." msgstr "" -#: ../../standalone/logdrake:1 +#: ../../standalone/drakconnect:1 #, c-format -msgid "please wait, parsing file: %s" -msgstr "будь ласка зажд╕ть, проходження файлу: %s" +msgid "DHCP client" +msgstr "кл╕╓нт DHCP" -#: ../../standalone/logdrake:1 +#: ../../partition_table.pm:1 #, c-format -msgid "Content of the file" -msgstr "Зм╕ст файлу" +msgid "Restoring from file %s failed: %s" +msgstr "В╕дновлення з файлу %s не спрацювало: %s" -#: ../../standalone/logdrake:1 +#: ../../mouse.pm:1 #, c-format -msgid "Calendar" -msgstr "Календар" +msgid "Logitech Mouse (serial, old C7 type)" +msgstr "Logitech Mouse (serial, тип C7)" -#: ../../standalone/logdrake:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Choose file" -msgstr "Вибер╕ть файл" +msgid "Are you sure that you want to set up printing on this machine?\n" +msgstr "" -#: ../../standalone/logdrake:1 -#, c-format -msgid "but not matching" -msgstr "але не в╕дпов╕да╓" +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "New devfs device" +msgstr "Шлюзовий пристр╕й" -#: ../../standalone/logdrake:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "matching" -msgstr "в╕дпов╕да╓" +msgid "ERROR: Cannot spawn %s." +msgstr "" -#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1 +#: ../../standalone/drakboot:1 #, c-format -msgid "Settings" -msgstr "Параметри" +msgid "Boot Style Configuration" +msgstr "Конф╕╜урац╕я стилю установки" -#: ../../standalone/logdrake:1 -#, c-format -msgid "A tool to monitor your logs" -msgstr "Зас╕б доглядання Ваших журнальних файл╕в" +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "Automatic time synchronization" +msgstr "Автоматична синхрон╕зац╕я часу (╕з застосуванням NTP)" -#: ../../standalone/logdrake:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "search" -msgstr "пошук" +msgid "Backup files not found at %s." +msgstr "" -#: ../../standalone/logdrake:1 +#: ../../share/advertising/01-thanks.pl:1 #, c-format -msgid "Mandrake Tools Explanation" +msgid "Thank you for choosing Mandrake Linux 9.1" msgstr "" -#: ../../standalone/logdrake:1 +#: ../../keyboard.pm:1 +#, c-format +msgid "Armenian (phonetic)" +msgstr "В╕рменська (фонетична)" + +#: ../../harddrake/v4l.pm:1 #, fuzzy, c-format -msgid "Syslog" -msgstr "syslog" +msgid "Card model:" +msgstr "Пам'ять картки (DMA)" -#: ../../standalone/logdrake:1 +#: ../../standalone/drakTermServ:1 #, fuzzy, c-format -msgid "Messages" -msgstr "пов╕домлення" +msgid "Thin Client" +msgstr "Кл╕╓нт DHCP" -#: ../../standalone/logdrake:1 +#: ../../standalone/drakTermServ:1 #, fuzzy, c-format -msgid "User" -msgstr "╤м'я користувача" +msgid "Start Server" +msgstr "Сервер NIS" -#: ../../standalone/logdrake:1 +#: ../../lang.pm:1 #, c-format -msgid "/Help/_About..." -msgstr "/П╕дказка/Про..." +msgid "Turkmenistan" +msgstr "Туркмен╕стан" -#: ../../standalone/logdrake:1 +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "All remote machines" +msgstr "(на ц╕й машин╕)" + +#: ../../standalone/drakboot:1 +#, fuzzy, c-format +msgid "Install themes" +msgstr "Встановити систему" + +#: ../../standalone/drakbackup:1 #, c-format -msgid "/Options/Test" -msgstr "/Параметри/Тест" +msgid "" +" updates 2002 MandrakeSoft by Stew Benedict " +msgstr "" -#: ../../standalone/logdrake:1 +#: ../../help.pm:1 #, c-format -msgid "/File/-" -msgstr "/Файл/-" +msgid "Espanol" +msgstr "" -#: ../../standalone/logdrake:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "/File/Save _As" -msgstr "/Файл/Зм╕нити _назву" +msgid "Preparing installation" +msgstr "П╕дготовка установки" -#: ../../standalone/logdrake:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "S" -msgstr "S" +msgid "Edit selected host/network" +msgstr "" -#: ../../standalone/logdrake:1 +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "Add User -->" +msgstr "Додати користувача" + +#: ../../lang.pm:1 #, c-format -msgid "/File/_Save" -msgstr "/Файл/За_писати" +msgid "Nauru" +msgstr "Науру" -#: ../../standalone/logdrake:1 +#: ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "True Type fonts installation" +msgstr "П╕дготовка установки" + +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "O" -msgstr "O" +msgid "Auto-detect printers connected directly to the local network" +msgstr "" -#: ../../standalone/logdrake:1 +#: ../../standalone/drakconnect:1 #, c-format -msgid "/File/_Open" -msgstr "/Файл/_В╕дкрити" +msgid "LAN configuration" +msgstr "Конф╕╜урац╕я мереж╕" -#: ../../standalone/logdrake:1 +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "hard disk model" +msgstr "Пам'ять картки (DMA)" + +#: ../../fsedit.pm:1 #, c-format -msgid "N" -msgstr "N" +msgid "You can't use a LVM Logical Volume for mount point %s" +msgstr "Для точки монтування %s не можна користуватися лог╕чним томом LVM" -#: ../../standalone/logdrake:1 +#: ../../standalone/drakfont:1 #, c-format -msgid "/File/_New" -msgstr "/Файл/Новий" +msgid "Get Windows Fonts" +msgstr "" -#: ../../standalone/logdrake:1 -#, fuzzy, c-format -msgid "Show only for the selected day" -msgstr "Показувати лише для цього дня" +#: ../../mouse.pm:1 +#, c-format +msgid "Mouse Systems" +msgstr "Mouse Systems" -#: ../../standalone/mousedrake:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Emulate third button?" -msgstr "╤м╕тувавати три кнопки?" +msgid "Iranian" +msgstr "╤ранська" -#: ../../standalone/mousedrake:1 +#: ../../lang.pm:1 #, c-format -msgid "Please choose your mouse type." -msgstr "Який тип миш╕ ви ма╓те?" +msgid "Croatia" +msgstr "Хорват╕я" -#: ../../standalone/net_monitor:1 -#, fuzzy, c-format -msgid "Connect %s" -msgstr "З'╓днатись" +#: ../../standalone/drakconnect:1 +#, c-format +msgid "Gateway:" +msgstr "Шлюз:" -#: ../../standalone/net_monitor:1 +#: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "Disconnect %s" -msgstr "В╕д'╓днатись" +msgid "Add server" +msgstr "Додати користувача" -#: ../../standalone/net_monitor:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "" -"Warning, another internet connection has been detected, maybe using your " -"network" -msgstr "" +msgid "Remote printer name" +msgstr "Назва в╕ддаленого принтер" -#: ../../standalone/net_monitor:1 +#: ../../share/advertising/10-security.pl:1 #, c-format -msgid "received" +msgid "" +"MandrakeSoft has designed exclusive tools to create the most secured Linux " +"version ever: Draksec, a system security management tool, and a strong " +"firewall are teamed up together in order to highly reduce hacking risks." msgstr "" -#: ../../standalone/net_monitor:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "transmitted" -msgstr "" +msgid "Device: " +msgstr "Пристр╕й: " -#: ../../standalone/net_monitor:1 -#, c-format -msgid "received: " -msgstr "" +#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1 +#, fuzzy, c-format +msgid "Printerdrake" +msgstr "Друкарка" -#: ../../standalone/net_monitor:1 +#: ../../install_steps_interactive.pm:1 #, c-format -msgid "sent: " -msgstr "" +msgid "License agreement" +msgstr "Л╕ценз╕йна умова" -#: ../../standalone/net_monitor:1 +#: ../../standalone/draksec:1 #, fuzzy, c-format -msgid "Local measure" -msgstr "Локальн╕ файли" +msgid "System Options" +msgstr "Опц╕╖ модуля:" -#: ../../standalone/net_monitor:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "average" +msgid "Please enter the directory where backups are stored" msgstr "" -#: ../../standalone/net_monitor:1 +#: ../../security/level.pm:1 #, fuzzy, c-format -msgid "Color configuration" -msgstr "Конф╕гурац╕я ╕нтернету" +msgid "Please choose the desired security level" +msgstr "Вибер╕ть р╕вень захисту" -#: ../../standalone/net_monitor:1 +#: ../../standalone/scannerdrake:1 #, c-format -msgid "" -"Connection failed.\n" -"Verify your configuration in the Mandrake Control Center." +msgid "This host is already in the list, it cannot be added again.\n" msgstr "" -#: ../../standalone/net_monitor:1 +#: ../../printer/main.pm:1 #, fuzzy, c-format -msgid "Connection complete." -msgstr "Швидк╕сть зв'язку" +msgid ", USB printer" +msgstr "Нема╓ принтера" -#: ../../standalone/net_monitor:1 +#: ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "Choose the applications that will support the fonts:" +msgstr "Вибер╕ть п╕дрозд╕ли, як╕ Ви хочете в╕дформатувати" + +#: ../../steps.pm:1 #, c-format -msgid "Disconnection from the Internet complete." -msgstr "" +msgid "Configure X" +msgstr "Настро╖ти X" -#: ../../standalone/net_monitor:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Disconnection from the Internet failed." -msgstr "" +msgid "Turkish (traditional \"F\" model)" +msgstr "Турецька (традиц╕йна \"F\" модель)" -#: ../../standalone/net_monitor:1 -#, fuzzy, c-format -msgid "Connecting to the Internet " -msgstr "З'╓днатися з ╕нтернетом" +#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1 +#: ../../standalone/scannerdrake:1 +#, c-format +msgid "Congratulations!" +msgstr "В╕тання!" -#: ../../standalone/net_monitor:1 +#: ../../standalone/drakperm:1 #, fuzzy, c-format -msgid "Disconnecting from the Internet " -msgstr "З'╓днатися з ╕нтернетом" +msgid "Use owner id for execution" +msgstr "Користуватися автовизначенням" -#: ../../standalone/net_monitor:1 +#: ../../standalone/drakperm:1 #, fuzzy, c-format -msgid "Wait please, testing your connection..." -msgstr "Випробування з'╓днання..." +msgid "Down" +msgstr "Зак╕нчено" -#: ../../standalone/net_monitor:1 +#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format -msgid "Logs" +msgid "Raw printer (No driver)" msgstr "" -#: ../../standalone/net_monitor:1 +#: ../../network/modem.pm:1 #, fuzzy, c-format -msgid "Connection Time: " -msgstr "Тип зв'язку:" +msgid "Install rpm" +msgstr "Установка" -#: ../../standalone/net_monitor:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Receiving Speed:" +msgid "" +"To print a file from the command line (terminal window) you can either use " +"the command \"%s \" or a graphical printing tool: \"xpp \" or " +"\"kprinter \". The graphical tools allow you to choose the printer and " +"to modify the option settings easily.\n" msgstr "" -#: ../../standalone/net_monitor:1 -#, fuzzy, c-format -msgid "Sending Speed:" -msgstr "Записати в файл" +#: ../../install_steps_gtk.pm:1 +#, c-format +msgid "Time remaining " +msgstr "Залишок часу " -#: ../../standalone/net_monitor:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Statistics" -msgstr "" +msgid "UK keyboard" +msgstr "Британська клав╕атура" -#: ../../standalone/net_monitor:1 -#, fuzzy, c-format -msgid "Profile " -msgstr "Проф╕ль: " +#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 +#: ../../diskdrake/smbnfs_gtk.pm:1 +#, c-format +msgid "Unmount" +msgstr "Розмонтувати" -#: ../../standalone/net_monitor:1 +#: ../../standalone/drakfont:1 #, fuzzy, c-format -msgid "Network Monitoring" -msgstr "Конф╕гурац╕я мереж╕" +msgid "Uninstall Fonts" +msgstr "Де╕нсталюю RPM'и" -#: ../../standalone/printerdrake:1 +#: ../../mouse.pm:1 #, fuzzy, c-format -msgid "Reading data of installed printers..." -msgstr "Локальний принтер" +msgid "Microsoft Explorer" +msgstr "Microsoft IntelliMouse" -#: ../../standalone/scannerdrake:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Name/IP address of host:" -msgstr "" +msgid "German (no dead keys)" +msgstr "Н╕мецька (без мертвих клав╕ш)" -#: ../../standalone/scannerdrake:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "This host is already in the list, it cannot be added again.\n" -msgstr "" - -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "Scannerdrake" -msgstr "Вибер╕ть граф╕чну плату" +msgid "Transferring %s..." +msgstr "Переношу %s ..." -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "You must enter a host name or an IP address.\n" -msgstr "Випробуйте мишку, будь-ласка" +#: ../../Xconfig/resolution_and_depth.pm:1 +#, c-format +msgid "32 thousand colors (15 bits)" +msgstr "32 тисяч╕ кольор╕в (15 б╕т)" -#: ../../standalone/scannerdrake:1 +#: ../../any.pm:1 #, c-format -msgid "Choose the host on which the local scanners should be made available:" +msgid "" +"You can export using NFS or Samba. Please select which you'd like to use." msgstr "" -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "Sharing of local scanners" -msgstr "Локальний принтер" - -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "This machine" -msgstr "(на ц╕й машин╕)" - -#: ../../standalone/scannerdrake:1 +#: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, fuzzy, c-format -msgid "Remove selected host" -msgstr "Видалити принтер" +msgid "Reboot" +msgstr "Root" -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "Edit selected host" -msgstr "знайдено %s" +#: ../../lang.pm:1 +#, c-format +msgid "Gambia" +msgstr "╫амб╕я" -#: ../../standalone/scannerdrake:1 +#: ../../standalone/drakbug:1 #, fuzzy, c-format -msgid "Add host" -msgstr "Додати користувача" +msgid "Mandrake Control Center" +msgstr "Центр керування" -#: ../../standalone/scannerdrake:1 +#: ../../network/drakfirewall.pm:1 #, c-format -msgid "These are the machines from which the scanners should be used:" +msgid "" +"You can enter miscellaneous ports. \n" +"Valid examples are: 139/tcp 139/udp.\n" +"Have a look at /etc/services for information." msgstr "" -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "Usage of remote scanners" -msgstr "Використовувати в╕льний прост╕р" - -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "All remote machines" -msgstr "(на ц╕й машин╕)" - -#: ../../standalone/scannerdrake:1 +#: ../../help.pm:1 #, c-format msgid "" -"These are the machines on which the locally connected scanner(s) should be " -"available:" +"Monitor\n" +"\n" +" The installer will normally automatically detect and configure the\n" +"monitor connected to your machine. If it is correct, you can choose from\n" +"this list the monitor you actually have connected to your computer." msgstr "" -#: ../../standalone/scannerdrake:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Use the scanners on hosts: " +msgid "\t-Tape \n" msgstr "" -#: ../../standalone/scannerdrake:1 +#: ../../standalone/drakhelp:1 #, c-format -msgid "Use scanners on remote computers" +msgid "" +"No browser is installed on your system, Please install one if you want to " +"browse the help system" msgstr "" -#: ../../standalone/scannerdrake:1 +#: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "Scanner sharing to hosts: " -msgstr "Друк" +msgid "Remember this password" +msgstr "ще раз пароль" -#: ../../standalone/scannerdrake:1 +#: ../../standalone/drakgw:1 #, c-format -msgid "The scanners on this machine are available to other computers" +msgid "Internet Connection Sharing is now enabled." +msgstr "Сп╕льне користування з'╓днанням з ╕нтернетом вмикнене" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "\t-Network by SSH.\n" msgstr "" -#: ../../standalone/scannerdrake:1 +#: ../../printer/printerdrake.pm:1 #, c-format msgid "" -"You can also decide here whether scanners on remote machines should be made " -"available on this machine." +" If the desired printer was auto-detected, simply choose it from the list " +"and then add user name, password, and/or workgroup if needed." msgstr "" +#: ../../help.pm:1 ../../install_interactive.pm:1 +#, c-format +msgid "Use the free space on the Windows partition" +msgstr "Використовувати в╕льний прост╕р на п╕дрозд╕л╕ Windows" + #: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "%s found on %s, configure it automatically?" +msgstr "Чи треба Вам настро╖ти друк?" + +#: ../../security/help.pm:1 #, c-format msgid "" -"Here you can choose whether the scanners connected to this machine should be " -"accessable by remote machines and by which remote machines." +"Arguments: (arg)\n" +"\n" +"Use password to authenticate users." msgstr "" -#: ../../standalone/scannerdrake:1 +#: ../../Xconfig/various.pm:1 #, c-format -msgid "Re-generating list of configured scanners ..." +msgid "XFree86 driver: %s\n" +msgstr "XFree86 драйвер: %s\n" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "This host/network is already in the list, it cannot be added again.\n" msgstr "" -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "Searching for new scanners ..." -msgstr "Локальний принтер" +#: ../../standalone/drakbackup:1 +#, c-format +msgid "" +"\n" +" DrakBackup Report \n" +"\n" +msgstr "" -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "Searching for configured scanners ..." -msgstr "Локальний принтер" +#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 +#, c-format +msgid "Choose the packages you want to install" +msgstr "Вибер╕ть пакети, як╕ ви хочете встановити" -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "Scanner sharing" -msgstr "Друк" +#: ../../lang.pm:1 +#, c-format +msgid "Papua New Guinea" +msgstr "Папуа Нова Гв╕нея" -#: ../../standalone/scannerdrake:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Add a scanner manually" +msgid "Serbian (cyrillic)" +msgstr "Сербська (кирилиця)" + +#: ../../standalone/draksplash:1 +#, c-format +msgid "Make kernel message quiet by default" msgstr "" -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "Search for new scanners" -msgstr "Локальний принтер" +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "" +"Do you want to set this printer (\"%s\")\n" +"as the default printer?" +msgstr "" +"Встановити принтер \"%s\"\n" +"як стандартний?" -#: ../../standalone/scannerdrake:1 +#: ../../standalone/drakgw:1 #, c-format -msgid "There are no scanners found which are available on your system.\n" +msgid "The DHCP end range" msgstr "" -#: ../../standalone/scannerdrake:1 +#: ../../any.pm:1 +#, c-format +msgid "Creating bootdisk..." +msgstr "Створюю дискету для завантаження" + +#: ../../standalone/net_monitor:1 #, fuzzy, c-format -msgid "" -"The following scanner\n" -"\n" -"%s\n" -"is available on your system.\n" -msgstr "У Ваш╕й систем╕ нема╓ адаптера мереж╕!" +msgid "Wait please, testing your connection..." +msgstr "Випробування з'╓днання..." + +#: ../../install_interactive.pm:1 +#, c-format +msgid "Bringing down the network" +msgstr "Вимикаю мережу" -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "" -"The following scanners\n" -"\n" -"%s\n" -"are available on your system.\n" -msgstr "У Ваш╕й систем╕ нема╓ адаптера мереж╕!" +#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 +#, c-format +msgid "Login ID" +msgstr "ID користувача" -#: ../../standalone/scannerdrake:1 +#: ../../services.pm:1 #, c-format msgid "" -"Your %s has been configured.\n" -"You may now scan documents using \"XSane\" from Multimedia/Graphics in the " -"applications menu." +"NFS is a popular protocol for file sharing across TCP/IP\n" +"networks. This service provides NFS file locking functionality." msgstr "" +"NFS - це дуже популярний протокол для сп╕льного використання файл╕в на\n" +"комп'ютерах, з'╓днаних мережею TCP/IP. Цей серв╕с забезпечу╓\n" +"можлив╕сть користування замиканням файл╕в." -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "choose device" -msgstr "Пристр╕й завантаження" - -#: ../../standalone/scannerdrake:1 +#: ../../standalone/drakconnect:1 #, c-format -msgid "Please select the device where your %s is attached" -msgstr "" +msgid "DHCP Client" +msgstr "Кл╕╓нт DHCP" -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "Searching for scanners ..." -msgstr "Локальний принтер" +#: ../../standalone/drakgw:1 +#, c-format +msgid "dismiss" +msgstr "прибрати" -#: ../../standalone/scannerdrake:1 +#: ../../printer/printerdrake.pm:1 #, fuzzy, c-format -msgid "Auto-detect available ports" -msgstr "Користуватися автовизначенням" +msgid "Printing/Scanning on \"%s\"" +msgstr "Вимикаю мережу" -#: ../../standalone/scannerdrake:1 +#: ../../standalone/drakfloppy:1 #, c-format -msgid "(Note: Parallel ports cannot be auto-detected)" -msgstr "" +msgid "omit raid modules" +msgstr "пропускати модул╕ raid" -#: ../../standalone/scannerdrake:1 +#: ../../services.pm:1 #, c-format msgid "" -"The %s must be configured by printerdrake.\n" -"You can launch printerdrake from the Mandrake Control Center in Hardware " -"section." +"lpd is the print daemon required for lpr to work properly. It is\n" +"basically a server that arbitrates print jobs to printer(s)." msgstr "" +"lpd - це демон друку, який забезпечу╓ роботу lpr. Фактично в╕н ╓\n" +"сервером, який надсила╓ роботу для друкування на принтер╕." -#: ../../standalone/scannerdrake:1 +#: ../../standalone/drakconnect:1 #, c-format -msgid "The %s is unsupported" -msgstr "" +msgid "Internet Connection Configuration" +msgstr "Конф╕гурац╕я з'╓днання з ╕нтернетом" -#: ../../standalone/scannerdrake:1 +#: ../../modules/parameters.pm:1 #, c-format -msgid "The %s is not known by this version of Scannerdrake." +msgid "comma separated numbers" msgstr "" -#: ../../standalone/scannerdrake:1 +#: ../../standalone/harddrake2:1 #, c-format -msgid "The %s is not supported by this version of Mandrake Linux." +msgid "" +"Once you've selected a device, you'll be able to see the device information " +"in fields displayed on the right frame (\"Information\")" msgstr "" -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "Port: %s" -msgstr "Порт" - -#: ../../standalone/scannerdrake:1 +#: ../../standalone/drakperm:1 #, c-format -msgid ", " +msgid "Move selected rule up one level" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format -msgid "Detected model: %s" -msgstr "знайдено %s" +msgid "" +"The following scanner\n" +"\n" +"%s\n" +"is available on your system.\n" +msgstr "У Ваш╕й систем╕ нема╓ адаптера мереж╕!" -#: ../../standalone/scannerdrake:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid " (" -msgstr "" - -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "Select a scanner model" -msgstr "Вибер╕ть граф╕чну плату" +msgid "Do you really want to remove the printer \"%s\"?" +msgstr "Чи Ви хочете видалити принтер \"%s\"?" -#: ../../standalone/scannerdrake:1 +#: ../../install_interactive.pm:1 #, c-format -msgid "%s is not in the scanner database, configure it manually?" -msgstr "" - -#: ../../standalone/scannerdrake:1 -#, fuzzy, c-format -msgid "%s found on %s, configure it automatically?" -msgstr "Чи треба Вам настро╖ти друк?" +msgid "I can't find any room for installing" +msgstr "Не можу знайти в╕льного простору для установки" -#: ../../standalone/service_harddrake:1 -#, fuzzy, c-format -msgid "Hardware probing in progress" -msgstr "знайдено на порту %s" +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Default printer" +msgstr "Стандартний принтер" -#: ../../standalone/service_harddrake:1 +#: ../../network/netconnect.pm:1 #, c-format -msgid "Some devices were added:\n" +msgid "" +"You have configured multiple ways to connect to the Internet.\n" +"Choose the one you want to use.\n" +"\n" msgstr "" +"Ви настро╖ли к╕лька способ╕в з'╓днання з ╕нформац╕йними тенетами.\n" +"Вибер╕ть один ╕з них, яким Ви будете користуватись.\n" +"\n" -#: ../../standalone/service_harddrake:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Some devices in the \"%s\" hardware class were removed:\n" -msgstr "" +msgid "Modify RAID" +msgstr "Зм╕нити RAID" -#: ../../share/advertising/01-thanks.pl:1 +#: ../../network/isdn.pm:1 #, c-format msgid "" -"The success of MandrakeSoft is based upon the principle of Free Software. " -"Your new operating system is the result of collaborative work of the " -"worldwide Linux Community." +"I have detected an ISDN PCI card, but I don't know its type. Please select a " +"PCI card on the next screen." msgstr "" +"Знайдена ISDN PCI плата, але нев╕домого типу. Вибер╕ть, будь-ласка, одну з " +"плат PCI на наступному екран╕." -#: ../../share/advertising/01-thanks.pl:1 +#: ../../any.pm:1 #, c-format -msgid "Welcome to the Open Source world." -msgstr "" +msgid "Add user" +msgstr "Додати користувача" -#: ../../share/advertising/01-thanks.pl:1 +#: ../../diskdrake/interactive.pm:1 #, c-format -msgid "Thank you for choosing Mandrake Linux 9.1" -msgstr "" +msgid "RAID-disks %s\n" +msgstr "Диски RAID %s\n" -#: ../../share/advertising/02-community.pl:1 +#: ../../lang.pm:1 #, c-format -msgid "" -"To share your own knowledge and help build Linux software, join our " -"discussion forums on our \"Community\" webpages." -msgstr "" +msgid "Liberia" +msgstr "Л╕бер╕я" -#: ../../share/advertising/02-community.pl:1 +#: ../../standalone/drakgw:1 #, c-format msgid "" -"Want to know more and to contribute to the Open Source community? Get " -"involved in the Free Software world!" +"Please enter the name of the interface connected to the internet.\n" +"\n" +"Examples:\n" +"\t\tppp+ for modem or DSL connections, \n" +"\t\teth0, or eth1 for cable connection, \n" +"\t\tippp+ for a isdn connection.\n" msgstr "" -#: ../../share/advertising/02-community.pl:1 +#: ../../steps.pm:1 #, c-format -msgid "Build the future of Linux!" -msgstr "" +msgid "Choose your keyboard" +msgstr "Вибер╕ть тип клав╕атури" -#: ../../share/advertising/03-software.pl:1 +#: ../../steps.pm:1 #, c-format -msgid "" -"And, of course, push multimedia to its limits with the very latest software " -"to play videos, audio files and to handle your images or photos." +msgid "Format partitions" +msgstr "Форматувати п╕дрозд╕ли" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Automatic correction of CUPS configuration" +msgstr "Автоматична конф╕╜урац╕я CUPS" + +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "Running \"%s\" ..." +msgstr "Стираю принтер \"%s\" ..." + +#: ../../harddrake/v4l.pm:1 +#, c-format +msgid "enable radio support" msgstr "" -#: ../../share/advertising/03-software.pl:1 +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "Scanner sharing to hosts: " +msgstr "Друк" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Loopback file name: %s" +msgstr "Назви файл╕в зворотнього монтування: %s" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Please choose the printer to which the print jobs should go." +msgstr "Вибер╕ть до якого посл╕довного порта п╕дключений Ваш модем?" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Do not transfer printers" +msgstr "Не переносити принтери" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "Delay before booting the default image" +msgstr "Пауза перед завантаженням основно╖ системи" + +#: ../../standalone/drakfont:1 #, c-format msgid "" -"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or " -"Kmail, create your documents with OpenOffice.org." +"\n" +" Copyright (C) 2001-2002 by MandrakeSoft \n" +" DUPONT Sebastien (original version)\n" +" CHAUMETTE Damien \n" +"\n" +" This program is free software; you can redistribute it and/or modify\n" +" it under the terms of the GNU General Public License as published by\n" +" the Free Software Foundation; either version 2, or (at your option)\n" +" any later version.\n" +"\n" +" This program is distributed in the hope that it will be useful,\n" +" but WITHOUT ANY WARRANTY; without even the implied warranty of\n" +" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" +" GNU General Public License for more details.\n" +"\n" +" You should have received a copy of the GNU General Public License\n" +" along with this program; if not, write to the Free Software\n" +" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" +"\n" +" Thanks:\n" +" - pfm2afm: \n" +"\t by Ken Borgendale:\n" +"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n" +" - type1inst:\n" +"\t by James Macnicol: \n" +"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n" +" - ttf2pt1: \n" +"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" +" Convert ttf font files to afm and pfb fonts\n" msgstr "" -#: ../../share/advertising/03-software.pl:1 -#, c-format -msgid "MandrakeSoft has selected the best software for you" -msgstr "" +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Please check for multisession CD" +msgstr "Клацн╕ть, будь-ласка, на п╕дрозд╕л╕" -#: ../../share/advertising/04-configuration.pl:1 -#, c-format -msgid "" -"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful " -"tool to fully adapt your computer to the use you make of it. Configure and " -"customize elements such as the security level, the peripherals (screen, " -"mouse, keyboard...), the Internet connection and much more!" -msgstr "" +#: ../../standalone/drakperm:1 +#, fuzzy, c-format +msgid "user" +msgstr "╤м'я користувача" -#: ../../share/advertising/04-configuration.pl:1 +#: ../../standalone/drakbackup:1 #, fuzzy, c-format -msgid "Mandrake's multipurpose configuration tool" -msgstr "Перен╕с конф╕гурац╕╖ принтер╕в " +msgid "Use Hard Disk to backup" +msgstr "Поганий резервний файл" -#: ../../share/advertising/05-desktop.pl:1 +#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1 +#: ../../standalone/drakboot:1 ../../standalone/drakgw:1 #, c-format -msgid "" -"Perfectly adapt your computer to your needs thanks to the 11 available " -"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME " -"2.2, Window Maker, ..." -msgstr "" +msgid "Configure" +msgstr "Настро╖ти" -#: ../../share/advertising/05-desktop.pl:1 -#, c-format -msgid "A customizable environment" -msgstr "" +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "Scannerdrake" +msgstr "Вибер╕ть граф╕чну плату" -#: ../../share/advertising/06-development.pl:1 +#: ../../standalone/drakconnect:1 #, c-format msgid "" -"To modify and to create in different languages such as Perl, Python, C and C+" -"+ has never been so easy thanks to GNU gcc 3 and the best Open Source " -"development environments." +"Warning, another Internet connection has been detected, maybe using your " +"network" msgstr "" -#: ../../share/advertising/06-development.pl:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "Mandrake Linux 9.1: the ultimate development platform" +msgid "Backup Users" msgstr "" -#: ../../share/advertising/07-server.pl:1 +#: ../../network/network.pm:1 #, c-format msgid "" -"Transform your computer into a powerful Linux server: Web server, mail, " -"firewall, router, file and print server (etc.) are just a few clicks away!" +"Please enter your host name.\n" +"Your host name should be a fully-qualified host name,\n" +"such as ``mybox.mylab.myco.com''.\n" +"You may also enter the IP address of the gateway if you have one." msgstr "" +"Введ╕ть, будь-ласка, назву Вашого хоста. Назва хоста повинна бути\n" +"повн╕стю квал╕ф╕кованою назвою хоста, такою, як, наприклад,\n" +"``mybox.mylab.myco.com''.\n" +"Ви також можете ввести IP адресу шлюза якщо Ви такий ма╓те." -#: ../../share/advertising/07-server.pl:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "Turn your computer into a reliable server" -msgstr "" +msgid "Select Printer Spooler" +msgstr "Вибер╕ть чергу друку для принтера" -#: ../../share/advertising/08-store.pl:1 -#, c-format -msgid "" -"Our full range of Linux solutions, as well as special offers on products and " -"other \"goodies\", are available on our e-store:" -msgstr "" +#: ../../standalone/drakboot:1 +#, fuzzy, c-format +msgid "Create new theme" +msgstr "Створити новий розд╕л" -#: ../../share/advertising/08-store.pl:1 +#: ../../standalone/logdrake:1 #, c-format -msgid "The official MandrakeSoft Store" +msgid "Mandrake Tools Explanation" msgstr "" -#: ../../share/advertising/09-mdksecure.pl:1 +#: ../../standalone/drakpxe:1 +#, fuzzy, c-format +msgid "No image found" +msgstr "Локальний принтер" + +#: ../../install_steps.pm:1 #, c-format msgid "" -"Enhance your computer performance with the help of a selection of partners " -"offering professional solutions compatible with Mandrake Linux" +"Some important packages didn't get installed properly.\n" +"Either your cdrom drive or your cdrom is defective.\n" +"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm" +"\"\n" msgstr "" +"Деяк╕ важлив╕ пакети не змогли в╕рно встановитися. Або Ваш\n" +"компакт-диск або прив╕д дефектн╕. Перев╕рте компакт диск на\n" +"встановленому комп'ютер╕ командою \"rpm -qpl \" \"Mandrake/RPMS/*.rpm\" \n" -#: ../../share/advertising/09-mdksecure.pl:1 -#, c-format -msgid "Get the best items with Mandrake Linux Strategic partners" -msgstr "" +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "Detected model: %s" +msgstr "знайдено %s" -#: ../../share/advertising/10-security.pl:1 +#: ../../standalone/drakedm:1 #, c-format msgid "" -"MandrakeSoft has designed exclusive tools to create the most secured Linux " -"version ever: Draksec, a system security management tool, and a strong " -"firewall are teamed up together in order to highly reduce hacking risks." +"X11 Display Manager allows you to graphically log\n" +"into your system with the X Window System running and supports running\n" +"several different X sessions on your local machine at the same time." msgstr "" -#: ../../share/advertising/10-security.pl:1 +#: ../../security/help.pm:1 #, c-format -msgid "Optimize your security by using Mandrake Linux" +msgid "if set to yes, run the daily security checks." msgstr "" -#: ../../share/advertising/11-mnf.pl:1 +#: ../../lang.pm:1 #, c-format -msgid "This product is available on the MandrakeStore Web site." -msgstr "" +msgid "Azerbaijan" +msgstr "Азейбаржан" -#: ../../share/advertising/11-mnf.pl:1 +#: ../../standalone/drakbackup:1 #, c-format -msgid "" -"Complete your security setup with this very easy-to-use software which " -"combines high performance components such as a firewall, a virtual private " -"network (VPN) server and client, an intrusion detection system and a traffic " -"manager." +msgid "No tape in %s!" msgstr "" -#: ../../share/advertising/11-mnf.pl:1 +#: ../../keyboard.pm:1 #, c-format -msgid "Secure your networks with the Multi Network Firewall" -msgstr "" +msgid "Dvorak (US)" +msgstr "Дворака (США)" -#: ../../share/advertising/12-mdkexpert.pl:1 +#: ../../standalone/harddrake2:1 #, c-format msgid "" -"Join the MandrakeSoft support teams and the Linux Community online to share " -"your knowledge and help others by becoming a recognized Expert on the online " -"technical support website:" +"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" msgstr "" -#: ../../share/advertising/12-mdkexpert.pl:1 +#: ../../printer/printerdrake.pm:1 #, c-format -msgid "" -"Find the solutions of your problems via MandrakeSoft's online support " -"platform." -msgstr "" +msgid "How is the printer connected?" +msgstr "Як принтер з'╓днаний" -#: ../../share/advertising/12-mdkexpert.pl:1 +#: ../../security/level.pm:1 #, fuzzy, c-format -msgid "Become a MandrakeExpert" -msgstr "експерт" - -#: ../../share/advertising/13-mdkexpert_corporate.pl:1 -#, c-format -msgid "" -"All incidents will be followed up by a single qualified MandrakeSoft " -"technical expert." -msgstr "" +msgid "Security level" +msgstr "Встановлення р╕вня безпеки" -#: ../../share/advertising/13-mdkexpert_corporate.pl:1 -#, c-format -msgid "An online platform to respond to enterprise support needs." -msgstr "" +#: ../../standalone/draksplash:1 +#, fuzzy, c-format +msgid "final resolution" +msgstr "Розд╕льна здатн╕сть" -#: ../../share/advertising/13-mdkexpert_corporate.pl:1 +#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1 #, fuzzy, c-format -msgid "MandrakeExpert Corporate" -msgstr "експерт" +msgid "Services" +msgstr "Сервер" + +#: ../../Xconfig/card.pm:1 +#, c-format +msgid "4 MB" +msgstr "4 Мб" #: ../../share/compssUsers:999 msgid "Office Workstation" @@ -17931,10 +17969,6 @@ msgstr "" "Програми для оф╕су: текстов╕ процесори (kword, abiword), бухгалтерськ╕\n" "таблиц╕ (kspread, gnumeric), переглядач╕ файл╕в pdf, тощо" -#: ../../share/compssUsers:999 -msgid "Workstation" -msgstr "Робоча станц╕я" - #: ../../share/compssUsers:999 msgid "Game station" msgstr "╤грова станц╕я" @@ -18007,10 +18041,6 @@ msgstr "" "Робоче середовище K (KDE) - основне граф╕чне середовище з набором\n" "допом╕жних засоб╕в" -#: ../../share/compssUsers:999 -msgid "Graphical Environment" -msgstr "Граф╕чне середовище" - #: ../../share/compssUsers:999 msgid "Gnome Workstation" msgstr "Робоча станц╕я Gnome" @@ -18031,10 +18061,6 @@ msgstr " msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "Icewm, Window Maker, Enlightenment, Fvwm, тощо" -#: ../../share/compssUsers:999 -msgid "Development" -msgstr "Розробник" - #: ../../share/compssUsers:999 msgid "C and C++ development libraries, programs and include files" msgstr "Б╕бл╕отеки для програмування в C, C++ програми та файли заголовк╕в" @@ -18107,40 +18133,82 @@ msgstr " #: ../../share/compssUsers:999 #, fuzzy -msgid "Audio station" -msgstr "Мультимед╕йна станц╕я" +msgid "Set of tools to read and send mail and news and to browse the Web" +msgstr "" +"Наб╕р засоб╕в для прочитання та передач╕ електронно╖ пошти та груп\n" +"новин (pine, mutt, tin..) та для перегляду ╕нформац╕йних тенет" + +#~ msgid "Internet connection & configuration" +#~ msgstr "З'╓днання з ╕нтернетом ╕ конф╕гурац╕я" -#: ../../share/compssUsers:999 #, fuzzy -msgid "Sound playing/editing programs" -msgstr "Звуков╕ та в╕део прогрвач╕ та редактори" +#~ msgid "Configure the connection" +#~ msgstr "Настро╖ти мережу" + +#~ msgid "Disconnect" +#~ msgstr "В╕д'╓днатись" + +#~ msgid "Connect" +#~ msgstr "З'╓днатись" + +#~ msgid "" +#~ "\n" +#~ "You can reconfigure your connection." +#~ msgstr "" +#~ "\n" +#~ "Ви можете зм╕нити настройки з'╓днання з ╕нтернетом" + +#~ msgid "" +#~ "\n" +#~ "You can connect to the Internet or reconfigure your connection." +#~ msgstr "" +#~ "\n" +#~ "Ви зараз з'╓днан╕ з ╕нтернетом." + +#~ msgid "You are not currently connected to the Internet." +#~ msgstr "Ви зараз не з'╓днан╕ з ╕нтернетом." + +#~ msgid "" +#~ "\n" +#~ "You can disconnect or reconfigure your connection." +#~ msgstr "" +#~ "\n" +#~ "Ви можете в╕д'╓днатись або зм╕нити конф╕╜урац╕ю сво╓╖ мереж╕." + +#~ msgid "You are currently connected to the Internet." +#~ msgstr "З'╓днання з ╕нтернетом встановлено." -#: ../../share/compssUsers:999 #, fuzzy -msgid "Video station" -msgstr "╤грова станц╕я" +#~ msgid "Write %s" +#~ msgstr "XFree86 %s" -#: ../../share/compssUsers:999 #, fuzzy -msgid "Video playing programs" -msgstr "Звуков╕ та в╕део прогрвач╕ та редактори" +#~ msgid "Author:" +#~ msgstr "Автотест" -#: ../../share/compssUsers:999 #, fuzzy -msgid "Graphic station" -msgstr "╤грова станц╕я" +#~ msgid "Audio station" +#~ msgstr "Мультимед╕йна станц╕я" -#: ../../share/compssUsers:999 #, fuzzy -msgid "Graphics programs" -msgstr "Граф╕чн╕ програми - так╕ як The Gimp" +#~ msgid "Sound playing/editing programs" +#~ msgstr "Звуков╕ та в╕део прогрвач╕ та редактори" -#: ../../share/compssUsers:999 #, fuzzy -msgid "Set of tools to read and send mail and news and to browse the Web" -msgstr "" -"Наб╕р засоб╕в для прочитання та передач╕ електронно╖ пошти та груп\n" -"новин (pine, mutt, tin..) та для перегляду ╕нформац╕йних тенет" +#~ msgid "Video station" +#~ msgstr "╤грова станц╕я" + +#, fuzzy +#~ msgid "Video playing programs" +#~ msgstr "Звуков╕ та в╕део прогрвач╕ та редактори" + +#, fuzzy +#~ msgid "Graphic station" +#~ msgstr "╤грова станц╕я" + +#, fuzzy +#~ msgid "Graphics programs" +#~ msgstr "Граф╕чн╕ програми - так╕ як The Gimp" #, fuzzy #~ msgid "Printer sharing" @@ -18304,10 +18372,6 @@ msgstr "" #~ "Або ви будете користуватися LILO ╕ в╕н не буде працювати, або ви не\n" #~ "будете користуватися LILO, тод╕ Вам не потр╕бна директор╕я /boot" -#, fuzzy -#~ msgid "Upgrade" -#~ msgstr "Поновлення" - #, fuzzy #~ msgid "Do you want to configure another printer?" #~ msgstr "Чи ви хочете випробувати нову конф╕╜урац╕ю?" -- cgit v1.2.1