From 8e6087befedc8f51b171a98262676f7837868b40 Mon Sep 17 00:00:00 2001
From: Francois Pons <fpons@mandriva.com>
Date: Wed, 19 Jun 2002 13:40:42 +0000
Subject: added patch-oem.pl file used to generate HP Mandrake Linux 8.2.

---
 perl-install/patch/patch-oem-hp.pl | 323 +++++++++++++++++++++++++++++++++++++
 1 file changed, 323 insertions(+)
 create mode 100644 perl-install/patch/patch-oem-hp.pl

(limited to 'perl-install/patch')

diff --git a/perl-install/patch/patch-oem-hp.pl b/perl-install/patch/patch-oem-hp.pl
new file mode 100644
index 000000000..0a5b0b51e
--- /dev/null
+++ b/perl-install/patch/patch-oem-hp.pl
@@ -0,0 +1,323 @@
+use modules;
+package modules;
+my $old_load_raw = \&load_raw;
+undef *load_raw;
+*load_raw = sub {
+    &$old_load_raw;
+
+    my @l = map { my ($i, @i) = @$_; [ $i, \@i ] } grep { $_->[0] !~ /ignore/ } @_;
+    foreach (@l) {
+	if ($_->[0] eq 'ehci-hcd') {
+	    add_alias('usb-interface1', $_->[0]);
+	}
+    }
+
+    if (get_alias("usb-interface") || get_alias("usb-interface1")) {
+	unless (-e "/proc/bus/usb/devices") {
+	    require fs; fs::mount('/proc/bus/usb', '/proc/bus/usb', 'usbdevfs');
+	    #- ensure keyboard is working, the kernel must do the job the BIOS was doing
+	    sleep 4;
+	    load_multi("usbkbd", "keybdev") if detect_devices::usbKeyboards();
+	}
+    }
+};
+
+my $old_load = \&load;
+undef *load;
+*load = sub {
+    &$old_load;
+
+    #- hack to get back usb-interface (even if already loaded by stage1)
+    #- NOTE load_multi is not used for that so not overloaded to fix that too.
+    if ($_[0] =~ /usb-[uo]hci/ && !get_alias("usb-interface")) {
+	add_alias('usb-interface', $_[0]);
+    } elsif ($_[0] eq 'ehci-hcd' && !get_alias("usb-interface1")) {
+	add_alias('usb-interface1', $_[0]);
+    }
+
+    if (get_alias("usb-interface") || get_alias("usb-interface1")) {
+	unless (-e "/proc/bus/usb/devices") {
+	    require fs; fs::mount('/proc/bus/usb', '/proc/bus/usb', 'usbdevfs');
+	    #- ensure keyboard is working, the kernel must do the job the BIOS was doing
+	    sleep 4;
+	    load_multi("usbkbd", "keybdev") if detect_devices::usbKeyboards();
+	}
+    }
+};
+
+#- ensure it is loaded using this patch.
+$::noauto or modules::load_thiskind("usb"); 
+sleep 2;
+
+use install_steps;
+package install_steps;
+
+my $old_beforeInstallPackages = \&beforeInstallPackages;
+undef *beforeInstallPackages;
+*beforeInstallPackages = sub {
+    &$old_beforeInstallPackages;
+
+    my ($o) = @_;
+    mkdir "$o->{prefix}$_" foreach qw(/boot /usr /usr/share /usr/share/mdk);
+    install_any::getAndSaveFile("Mandrake/base/oem-message-graphic", "$o->{prefix}/boot/oem-message-graphic");
+    install_any::getAndSaveFile("Mandrake/base/oem-background.png", "$o->{prefix}/usr/share/mdk/oem-background.png");
+};
+
+my $old_afterInstallPackages = \&afterInstallPackages;
+undef *afterInstallPackages;
+*afterInstallPackages = sub {
+    &$old_afterInstallPackages;
+
+    my ($o) = @_;
+
+    #- lilo image.
+    rename "$o->{prefix}/boot/lilo-graphic/message", "$o->{prefix}/boot/lilo-graphic/message.orig";
+    system "chroot", $o->{prefix}, "cp", "-f", "/boot/oem-message-graphic", "/boot/lilo-graphic/message";
+
+    #- KDE desktop background.
+    if (-e "$o->{prefix}/usr/share/config/kdesktoprc") {
+	update_gnomekderc("$o->{prefix}/usr/share/config/kdesktoprc", "Desktop0",
+			  MultiWallpaperMode => "NoMulti",
+			  Wallpaper => "/usr/share/mdk/oem-background.png",
+			  WallpaperMode => "Scaled",
+			 );
+    }
+    #- GNOME desktop background.
+    if (-e "$o->{prefix}/etc/gnome/config/Background") {
+	update_gnomekderc("$o->{prefix}/etc/gnome/config/Background", "Default",
+			  wallpaper => "/usr/share/mdk/oem-background.png",
+			  wallpaperAlign => "3",
+			 );
+    }
+
+    #- make sure no error can be forwarded, test staroffice installed and OpenOffice.org,
+    #- remove the first if the second is installed.
+    eval {
+	if (!$o->{isUpgrade} && -e "$o->{prefix}/usr/lib/openoffice/program/soffice.bin" && grep { -e "$o->{prefix}/usr/lib/office60_$_/program/soffice.bin" } qw(de en es fr it)) {
+	    require run_program;
+	    log::l("removing OpenOffice.org as staroffice is installed");
+	    run_program::rooted($o->{prefix}, "rpm", "-e", "OpenOffice.org");
+	}
+    };
+};
+
+use install_any;
+package install_any;
+
+undef *copy_advertising;
+*copy_advertising = sub {
+    my ($o) = @_;
+
+    return if $::rootwidth < 800;
+
+    my $f;
+    my $source_dir = "Mandrake/share/advertising";
+    foreach ("." . $o->{lang}, "." . substr($o->{lang},0,2), '') {
+	$f = getFile("$source_dir$_/list") or next;
+	$source_dir = "$source_dir$_";
+    }
+    if (my @files = <$f>) {
+	my $dir = "$o->{prefix}/tmp/drakx-images";
+	mkdir $dir;
+	unlink glob_("$dir/*");
+	foreach (@files) {
+	    chomp;
+	    getAndSaveFile("$source_dir/$_", "$dir/$_");
+	    s/\.png/\.pl/;
+	    getAndSaveFile("$source_dir/$_", "$dir/$_");
+	    s/\.pl/_icon\.png/;
+	    getAndSaveFile("$source_dir/$_", "$dir/$_");
+	    s/_icon\.png/\.png/;
+	}
+	@advertising_images = map { $_ && -e "$dir/$_" ? ("$dir/$_") : () } @files;
+    }
+};
+
+#undef *allowNVIDIA_rpms;
+#*allowNVIDIA_rpms = sub {
+#    my ($packages) = @_;
+#    require pkgs;
+#    if (pkgs::packageByName($packages, "NVIDIA_GLX")) {
+#	#- at this point, we can allow using NVIDIA 3D acceleration packages.
+#	my @rpms;
+#	foreach (keys %{$packages->{names}}) {
+#	    my ($ext, $version, $release) = /kernel[^-]*(-smp|-enterprise|-secure)?(?:-(\d.*?)\.(\d+\.\d+mdk))?$/ or next;
+#	    my $p = pkgs::packageByName($packages, $_);
+#	    pkgs::packageSelectedOrInstalled($p) or next;
+#	    $version or ($version, $release) = (pkgs::packageVersion($p), pkgs::packageRelease($p));
+#	    my $name = "NVIDIA_kernel-$version-$release$ext";
+#	    pkgs::packageByName($packages, $name) or return;
+#	    push @rpms, $name;
+#	}
+#	@rpms > 0 or return;
+#	return [ @rpms, "NVIDIA_GLX" ];
+#    }
+#};
+
+use detect_devices;
+package detect_devices;
+
+undef *usbMice;
+*usbMice = sub { grep { ($_->{media_type} =~ /\|Mouse/ || $_->{driver} =~ /Mouse:USB/) &&
+			  $_->{driver} !~ /Tablet:wacom/} usb_probe() };
+
+use Xconfigurator;
+package Xconfigurator;
+
+undef *cardConfigurationAuto;
+*cardConfigurationAuto = sub {
+    my @cards;
+    if (my @c = grep { $_->{driver} =~ /(Card|Server):/ } detect_devices::probeall()) {
+	@c >= 2 && $c[0]{description} eq $c[1]{description} && $c[0]{description} =~ /82830 CGC/ and shift @c;
+	foreach my $i (0..$#c) {
+	    local $_ = $c[$i]->{driver};
+	    my $card = { identifier => ($c[$i]{description} . (@c > 1 && " $i")) };
+	    $card->{type} = $1 if /Card:(.*)/;
+	    $card->{server} = $1 if /Server:(.*)/;
+	    $card->{driver} = $1 if /Driver:(.*)/;
+	    $card->{flags}{needVideoRam} = /86c368|S3 Inc|Tseng.*ET6\d00/;
+	    $card->{busid} = "PCI:$c[$i]{pci_bus}:$c[$i]{pci_device}:$c[$i]{pci_function}";
+	    push @{$card->{lines}}, @{$lines{$card->{identifier}} || []};
+	    push @cards, $card;
+	}
+    }
+    #- take a default on sparc if nothing has been found.
+    if (arch() =~ /^sparc/ && !@cards) {
+        log::l("Using probe with /proc/fb as nothing has been found!");
+	local $_ = cat_("/proc/fb");
+	if (/Mach64/) { push @cards, { server => "Mach64" } }
+	elsif (/Permedia2/) { push @cards, { server => "3DLabs" } }
+	else { push @cards, { server => "Sun24" } }
+    }
+    #- special case for dual head card using only one busid.
+    @cards = map { my $dup = $_->{identifier} =~ /MGA G[45]50/ ? 2 : 1;
+		   if ($dup > 1) {
+		       my @result;
+		       my $orig = $_;
+		       foreach (1..$dup) {
+			   my $card = {};
+			   add2hash($card, $orig);
+			   push @result, $card;
+		       }
+		       @result;
+		   } else {
+		       ($_);
+		   }
+	       } @cards;
+    #- make sure no type are already used, duplicate both screen
+    #- and rename type (because used as id).
+    if (@cards > 1) {
+	my $card = 1;
+	foreach (@cards) {
+	    updateCardAccordingName($_, $_->{type}) if $_->{type};
+	    $_->{type} = "$_->{type} $card";
+	    $card++;
+	}
+    }
+    #- in case of only one cards, remove all busid reference, this will avoid
+    #- need of change of it if the card is moved.
+    #- on many PPC machines, card is on-board, busid is important, leave?
+    @cards == 1 and delete $cards[0]{busid} if arch() !~ /ppc/;
+    @cards;
+};
+
+use mouse;
+package mouse;
+undef *detect;
+*detect = sub {
+    if (arch() =~ /^sparc/) {
+	return fullname2mouse("sunmouse|Sun - Mouse");
+    }
+    if (arch() eq "ppc") {
+        return fullname2mouse(detect_devices::hasMousePS2("usbmouse") ? 
+			      "USB|1 button" :
+			      #- No need to search for an ADB mouse.  If I did, the PPC kernel would
+			      #- find one whether or not I had one installed!  So..  default to it.
+			      "busmouse|1 button");
+    }
+
+    my @wacom;
+    my $fast_mouse_probe = sub {
+	my $auxmouse = detect_devices::hasMousePS2("psaux") && fullname2mouse("PS/2|Standard", unsafe => 1);
+
+	if (modules::get_alias("usb-interface")) {
+	    if (my (@l) = detect_devices::usbMice()) {
+		log::l("found usb mouse $_->{driver} $_->{description} ($_->{type})") foreach @l;
+		eval { modules::load($_) foreach qw(hid mousedev usbmouse) };
+		if (!$@ && detect_devices::tryOpen("usbmouse")) {
+		    my $mouse = fullname2mouse($l[0]{driver} =~ /Mouse:(.*)/ ? $1 : "USB|Generic");
+		    $auxmouse and $mouse->{auxmouse} = $auxmouse; #- for laptop, we kept the PS/2 as secondary (symbolic).
+		    return $mouse;
+		}
+		eval { modules::unload($_) foreach qw(usbmouse mousedev hid) };
+	    }
+	}
+	$auxmouse;
+    };
+
+    if (modules::get_alias("usb-interface")) {
+	my $keep_mouse;
+	if (my (@l) = detect_devices::usbWacom()) {
+	    log::l("found usb wacom $_->{driver} $_->{description} ($_->{type})") foreach @l;
+	    eval { modules::load("wacom"); modules::load("evdev"); };
+	    unless ($@) {
+		foreach (0..$#l) {
+		    detect_devices::tryOpen("input/event$_") and $keep_mouse = 1, push @wacom, "input/event$_";
+		}
+	    }
+	    $keep_mouse or eval { modules::unload("evdev"); modules::unload("wacom"); };
+	}
+    }
+
+    #- at this level, not all possible mice are detected so avoid invoking serial_probe
+    #- which takes a while for its probe.
+    if ($::isStandalone) {
+	my $mouse = $fast_mouse_probe->();
+	$mouse and return ($mouse, @wacom);
+    }
+
+    #- probe serial device to make sure a wacom has been detected.
+    eval { modules::load("serial") };
+    my ($r, @serial_wacom) = mouseconfig(); push @wacom, @serial_wacom;
+
+    if (!$::isStandalone) {
+	my $mouse = $fast_mouse_probe->();
+	$r && $mouse and $r->{auxmouse} = $mouse; #- we kept the auxilliary mouse as PS/2.
+	$r and return ($r, @wacom);
+	$mouse and return ($mouse, @wacom);
+    } else {
+	$r and return ($r, @wacom);
+    }
+
+    #- in case only a wacom has been found, assume an inexistant mouse (necessary).
+    @wacom and return { CLASS      => 'MOUSE',
+			nbuttons   => 2,
+			device     => "nothing",
+			MOUSETYPE  => "Microsoft",
+			XMOUSETYPE => "Microsoft"}, @wacom;
+
+    if (!modules::get_alias("usb-interface") && detect_devices::is_a_recent_computer() && $::isInstall && !$::noauto) {
+	#- special case for non detected usb interface on a box with no mouse.
+	#- we *must* find out if there really is no usb, otherwise the box may
+	#- not be accessible via the keyboard (if the keyboard is USB)
+	#- the only way to know this is to make a full pci probe
+	modules::load_thiskind("usb", '', 'unsafe'); 
+	if (my $mouse = $fast_mouse_probe->()) {
+	    return $mouse;
+	}
+    }
+
+    if (modules::get_alias("usb-interface")) {
+	eval { modules::load($_) foreach qw(hid mousedev usbmouse) };
+	sleep 1;
+	if (!$@ && detect_devices::tryOpen("usbmouse")) {
+	    #- defaults to generic USB mouse on usbmouse.
+	    log::l("defaulting to usb generic mouse");
+	    return fullname2mouse("USB|Generic", unsafe => 1);
+	}
+    }
+
+    #- defaults to generic serial mouse on ttyS0.
+    #- Oops? using return let return a hash ref, if not using it, it return a list directly :-)
+    return fullname2mouse("serial|Generic 2 Button Mouse", unsafe => 1);
+};
-- 
cgit v1.2.1