From 313021652854604a90727e197ab0ca2a4f57c3ad Mon Sep 17 00:00:00 2001 From: Pascal Rigaux Date: Mon, 6 Jun 2005 07:57:24 +0000 Subject: *** empty log message *** --- perl-install/ChangeLog | 984 ++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 983 insertions(+), 1 deletion(-) (limited to 'perl-install/ChangeLog') diff --git a/perl-install/ChangeLog b/perl-install/ChangeLog index 56579f25c..c8e387bed 100644 --- a/perl-install/ChangeLog +++ b/perl-install/ChangeLog @@ -1,3 +1,985 @@ +2005/06/06 Olivier Blin + + * harddrake/autoconf.pm: netconnect API change, + harddrake::autoconf::network_conf seems unused + anyway, and this easy_dhcp thing is already performed by hotplug + + * network/network.pm: make it more readable + set system hostname when writing network configuration + update comments + + * standalone/drakgw: drop unused variable, this file is modified in + network::shorewall now + new netconnect API + + * network/adsl.pm: add ISP field in eagle-usb.conf + + * bootsplash.pm: fix typo instead of trying to be perl_checker compliant + ... + + * network/shorewall.pm: API change (me sux) + + * standalone/drakconnect: kill unused variables + simplify apply() since sethostname() is done by configure_network() + handle GATEWAY field again in manage interface + use real_main here since exceptions are handled + + * standalone/draksplash: create adjustments before resolution is set so + that they get correct upper values + - create update_scales_for_resolution() and + update_scale_values_from_conf() out of update_scale_values() + - modify $adj{$_}{value} instead of calling $adj{$_}->set_value to + avoid some artefacts caused by callbacks + - draw cross in progress bar + - update_rect -> update_theme_from_rect + - create update_rect out of switch_to_mode + really consider text box values + + * printer/printerdrake.pm: new netconnect API + +2005/06/06 Per Øyvind Karlsen + + * share/po/nb.po: Translated more strings + +2005/06/06 Pixel + + * install2.pm, install_any.pm: install2 functions should be steps + get rid of $clicked and $ent_number (obsolete) + + * share/compssUsers.pl: change the default in case of low resources and + add the Icewm choice + make a special "low resources" choice + + * bootloader.pm: + - put quotes if needed for root=xxx (quotes are needed for LABEL=...) + - use LABEL=... if preferred + rewrite before adding more + keep read-only, read-write and label as verbatim as possible + (note that read-only will not appear by default anymore since "ro" is + the default) + use bootloader->{message_text} instead of bootloader->{message} + + * share/rpmsrate, detect_devices.pm: make a special "low resources" choice + + * install_steps.pm: get rid of $clicked and $ent_number (obsolete) + use bootloader->{message_text} instead of bootloader->{message} + + * install_steps_interactive.pm: get rid of $clicked and $ent_number + (obsolete) + don't add us_intl, lang2keyboards() takes care of everything (bugzilla + #12979) + + * keyboard.pm: default to "en" keyboard (as requested by pablo) + + * standalone/bootloader-config: nicer error + - put quotes if needed for root=xxx (quotes are needed for LABEL=...) + - use LABEL=... if preferred + + * install_steps_gtk.pm, install_steps_auto_install.pm: get rid of $clicked + and $ent_number (obsolete) + +2005/06/03 Olivier Blin + + * network/tools.pm: net interface is now in $net->{net_interface} + - merge network settings in a $net hash (it modifies $o fields too): + o $netc becomes $net->{network} and $net->{resolv} + o $intf becomes $net->{ifcfg} + - move zeroconf config stuff in write_zeroconf + - read_tmdns_conf -> read_zeroconf + - read_all_conf -> read_net_conf + - configureNetwork2 -> configure_network + - configure_network: write ifcfg files for ppp interfaces too + - don't install wireless-tools in configure_network, this package is + in basesystem + - most functions don't need the file path as an argument in + network::network + - drop network::tools::remove_initscript + - don't export too much from network::network + - don't export from network::tools + - remove adsl_unsupported_eci step in drakconnect + - drop passwd2 field in network::adsl + - drop $net->{isdn_internal} + - network::netconnect : main -> safe_main + - use network::netconnect::real_main during install + - don't read network config in network::netconnect::real_main + - install_steps::upNetwork : resolv.conf is already symlinked by + network::network::configure_network when appropriate + - try to fix install_any::generate_automatic_stage1_params to use a + real interface configuration + - put authentication stuff in $net->{auth} + - drop network::ethernet::write_ether_conf + - drop network::adsl::get_wizard + - use 'static' instead of 'manual' as ADSL method + - drop first_modem and its workarounds in network::modem + - drop deprecated "multiple_internet_cnx" step in drakconnect + - don't save /etc/sysconfig/drakconnect anymore + - drop MDK::Common::Globals stuff + - drop getIP in net_applet (Pixel) + - drop $netc->{DHCP} + - configure_network(): write resolv.conf even if a dhcp interface is + configured + + * install2.pm: define $o->{net}{type} and $o->{net}{net_interface} for lan + installs + remove comment, stage1 now writes DOMAINNAME and DHCP_HOSTNAME in the + proper files + $o->{net}{network} and $o->{net}{resolv} may not exist at this stage of + installation (they are created by read_net_conf), create them if needed + - merge network settings in a $net hash (it modifies $o fields too): + o $netc becomes $net->{network} and $net->{resolv} + o $intf becomes $net->{ifcfg} + - move zeroconf config stuff in write_zeroconf + - read_tmdns_conf -> read_zeroconf + - read_all_conf -> read_net_conf + - configureNetwork2 -> configure_network + - configure_network: write ifcfg files for ppp interfaces too + - don't install wireless-tools in configure_network, this package is + in basesystem + - most functions don't need the file path as an argument in + network::network + - drop network::tools::remove_initscript + - don't export too much from network::network + - don't export from network::tools + - remove adsl_unsupported_eci step in drakconnect + - drop passwd2 field in network::adsl + - drop $net->{isdn_internal} + - network::netconnect : main -> safe_main + - use network::netconnect::real_main during install + - don't read network config in network::netconnect::real_main + - install_steps::upNetwork : resolv.conf is already symlinked by + network::network::configure_network when appropriate + - try to fix install_any::generate_automatic_stage1_params to use a + real interface configuration + - put authentication stuff in $net->{auth} + - drop network::ethernet::write_ether_conf + - drop network::adsl::get_wizard + - use 'static' instead of 'manual' as ADSL method + - drop first_modem and its workarounds in network::modem + - drop deprecated "multiple_internet_cnx" step in drakconnect + - don't save /etc/sysconfig/drakconnect anymore + - drop MDK::Common::Globals stuff + - drop getIP in net_applet (Pixel) + - drop $netc->{DHCP} + - configure_network(): write resolv.conf even if a dhcp interface is + configured + + * mdk-stage1/network.c: write DHCP_HOSTNAME in /tmp/ifcfg-* file instead + of /tmp/network + domain name is already in /etc/resolv.conf (and stage2 reads this file + too), don't write it in /tmp/network + + * standalone/drakconnect: drop unused subs + - merge network settings in a $net hash (it modifies $o fields too): + o $netc becomes $net->{network} and $net->{resolv} + o $intf becomes $net->{ifcfg} + - move zeroconf config stuff in write_zeroconf + - read_tmdns_conf -> read_zeroconf + - read_all_conf -> read_net_conf + - configureNetwork2 -> configure_network + - configure_network: write ifcfg files for ppp interfaces too + - don't install wireless-tools in configure_network, this package is + in basesystem + - most functions don't need the file path as an argument in + network::network + - drop network::tools::remove_initscript + - don't export too much from network::network + - don't export from network::tools + - remove adsl_unsupported_eci step in drakconnect + - drop passwd2 field in network::adsl + - drop $net->{isdn_internal} + - network::netconnect : main -> safe_main + - use network::netconnect::real_main during install + - don't read network config in network::netconnect::real_main + - install_steps::upNetwork : resolv.conf is already symlinked by + network::network::configure_network when appropriate + - try to fix install_any::generate_automatic_stage1_params to use a + real interface configuration + - put authentication stuff in $net->{auth} + - drop network::ethernet::write_ether_conf + - drop network::adsl::get_wizard + - use 'static' instead of 'manual' as ADSL method + - drop first_modem and its workarounds in network::modem + - drop deprecated "multiple_internet_cnx" step in drakconnect + - don't save /etc/sysconfig/drakconnect anymore + - drop MDK::Common::Globals stuff + - drop getIP in net_applet (Pixel) + - drop $netc->{DHCP} + - configure_network(): write resolv.conf even if a dhcp interface is + configured + + * standalone/drakauth, network/modem.pm, network/adsl_consts.pm, + standalone/finish-install, authentication.pm, network/ethernet.pm, + network/isdn.pm, standalone/net_applet, standalone/drakautoinst, + standalone/drakpxe, install_steps_interactive.pm, network/netconnect.pm, + network/adsl.pm, standalone/net_monitor: + - merge network settings in a $net hash (it modifies $o fields too): + o $netc becomes $net->{network} and $net->{resolv} + o $intf becomes $net->{ifcfg} + - move zeroconf config stuff in write_zeroconf + - read_tmdns_conf -> read_zeroconf + - read_all_conf -> read_net_conf + - configureNetwork2 -> configure_network + - configure_network: write ifcfg files for ppp interfaces too + - don't install wireless-tools in configure_network, this package is + in basesystem + - most functions don't need the file path as an argument in + network::network + - drop network::tools::remove_initscript + - don't export too much from network::network + - don't export from network::tools + - remove adsl_unsupported_eci step in drakconnect + - drop passwd2 field in network::adsl + - drop $net->{isdn_internal} + - network::netconnect : main -> safe_main + - use network::netconnect::real_main during install + - don't read network config in network::netconnect::real_main + - install_steps::upNetwork : resolv.conf is already symlinked by + network::network::configure_network when appropriate + - try to fix install_any::generate_automatic_stage1_params to use a + real interface configuration + - put authentication stuff in $net->{auth} + - drop network::ethernet::write_ether_conf + - drop network::adsl::get_wizard + - use 'static' instead of 'manual' as ADSL method + - drop first_modem and its workarounds in network::modem + - drop deprecated "multiple_internet_cnx" step in drakconnect + - don't save /etc/sysconfig/drakconnect anymore + - drop MDK::Common::Globals stuff + - drop getIP in net_applet (Pixel) + - drop $netc->{DHCP} + - configure_network(): write resolv.conf even if a dhcp interface is + configured + + * install_steps.pm: introduce network_is_cheap(), use it, and fix a + boolean typo + $o->{net}{type} is already defined in more appropriate places + - merge network settings in a $net hash (it modifies $o fields too): + o $netc becomes $net->{network} and $net->{resolv} + o $intf becomes $net->{ifcfg} + - move zeroconf config stuff in write_zeroconf + - read_tmdns_conf -> read_zeroconf + - read_all_conf -> read_net_conf + - configureNetwork2 -> configure_network + - configure_network: write ifcfg files for ppp interfaces too + - don't install wireless-tools in configure_network, this package is + in basesystem + - most functions don't need the file path as an argument in + network::network + - drop network::tools::remove_initscript + - don't export too much from network::network + - don't export from network::tools + - remove adsl_unsupported_eci step in drakconnect + - drop passwd2 field in network::adsl + - drop $net->{isdn_internal} + - network::netconnect : main -> safe_main + - use network::netconnect::real_main during install + - don't read network config in network::netconnect::real_main + - install_steps::upNetwork : resolv.conf is already symlinked by + network::network::configure_network when appropriate + - try to fix install_any::generate_automatic_stage1_params to use a + real interface configuration + - put authentication stuff in $net->{auth} + - drop network::ethernet::write_ether_conf + - drop network::adsl::get_wizard + - use 'static' instead of 'manual' as ADSL method + - drop first_modem and its workarounds in network::modem + - drop deprecated "multiple_internet_cnx" step in drakconnect + - don't save /etc/sysconfig/drakconnect anymore + - drop MDK::Common::Globals stuff + - drop getIP in net_applet (Pixel) + - drop $netc->{DHCP} + - configure_network(): write resolv.conf even if a dhcp interface is + configured + + * standalone/draksplash: perl_checker fixes, make mode optionnal in + load_image + + * network/ndiswrapper.pm: drop unused variable, this is done in + detect_devices::get_sysfs_device_id_map() + + * install_any.pm: do not use a loop device to read ISO image IDs, read + them directly in the file ... + provide backward compatibility for network fields in loadO + remove unneeded parentheses (keep first() to make it readable by + trainees ...) + - merge network settings in a $net hash (it modifies $o fields too): + o $netc becomes $net->{network} and $net->{resolv} + o $intf becomes $net->{ifcfg} + - move zeroconf config stuff in write_zeroconf + - read_tmdns_conf -> read_zeroconf + - read_all_conf -> read_net_conf + - configureNetwork2 -> configure_network + - configure_network: write ifcfg files for ppp interfaces too + - don't install wireless-tools in configure_network, this package is + in basesystem + - most functions don't need the file path as an argument in + network::network + - drop network::tools::remove_initscript + - don't export too much from network::network + - don't export from network::tools + - remove adsl_unsupported_eci step in drakconnect + - drop passwd2 field in network::adsl + - drop $net->{isdn_internal} + - network::netconnect : main -> safe_main + - use network::netconnect::real_main during install + - don't read network config in network::netconnect::real_main + - install_steps::upNetwork : resolv.conf is already symlinked by + network::network::configure_network when appropriate + - try to fix install_any::generate_automatic_stage1_params to use a + real interface configuration + - put authentication stuff in $net->{auth} + - drop network::ethernet::write_ether_conf + - drop network::adsl::get_wizard + - use 'static' instead of 'manual' as ADSL method + - drop first_modem and its workarounds in network::modem + - drop deprecated "multiple_internet_cnx" step in drakconnect + - don't save /etc/sysconfig/drakconnect anymore + - drop MDK::Common::Globals stuff + - drop getIP in net_applet (Pixel) + - drop $netc->{DHCP} + - configure_network(): write resolv.conf even if a dhcp interface is + configured + + * network/network.pm: keep NETWORKING_IPV6 and FORWARD_IPV4 variables in + /etc/sysconfig/network + - merge network settings in a $net hash (it modifies $o fields too): + o $netc becomes $net->{network} and $net->{resolv} + o $intf becomes $net->{ifcfg} + - move zeroconf config stuff in write_zeroconf + - read_tmdns_conf -> read_zeroconf + - read_all_conf -> read_net_conf + - configureNetwork2 -> configure_network + - configure_network: write ifcfg files for ppp interfaces too + - don't install wireless-tools in configure_network, this package is + in basesystem + - most functions don't need the file path as an argument in + network::network + - drop network::tools::remove_initscript + - don't export too much from network::network + - don't export from network::tools + - remove adsl_unsupported_eci step in drakconnect + - drop passwd2 field in network::adsl + - drop $net->{isdn_internal} + - network::netconnect : main -> safe_main + - use network::netconnect::real_main during install + - don't read network config in network::netconnect::real_main + - install_steps::upNetwork : resolv.conf is already symlinked by + network::network::configure_network when appropriate + - try to fix install_any::generate_automatic_stage1_params to use a + real interface configuration + - put authentication stuff in $net->{auth} + - drop network::ethernet::write_ether_conf + - drop network::adsl::get_wizard + - use 'static' instead of 'manual' as ADSL method + - drop first_modem and its workarounds in network::modem + - drop deprecated "multiple_internet_cnx" step in drakconnect + - don't save /etc/sysconfig/drakconnect anymore + - drop MDK::Common::Globals stuff + - drop getIP in net_applet (Pixel) + - drop $netc->{DHCP} + - configure_network(): write resolv.conf even if a dhcp interface is + configured + +2005/06/03 Pixel + + * lang.pm: drop now unused variable + during_install__l2charset() was used by share/gen_locales.sh which is + now dropped + update comment + get rid of the few remaining $LD_LOADER + for finish-install + + * install_steps.pm: dropping pkg_install_if_requires_satisfied() (old & + unused) + keyboard::setup() is better named keyboard::setup_install() + + * authentication.pm: read existing authentication conf (only minimal + support for now) + simplify + + * standalone/drakpxe: drop unused code (and one should use append_to_file + instead of this outpend) + + * standalone/logdrake, fs/type.pm, install2.pm, raid.pm, c/stuff.xs.pl, + standalone/drakperm: remove unused code + + * tools/drakx-in-chroot: don't rmdir directories in the chroot + + * .perl_checker: add many non perl_checker compatible modules + + * diskdrake/interactive.pm: remove unused isPrimary + drop old unused code + + * commands.pm: drop oooold broken code + drop oooold deprecated code + inline old mount command which has been removed + keyboard::setup() is better named keyboard::setup_install() + + * standalone/finish-install: add language selection to finish-install + adapt to network::netconnect::real_main() prototype change + + * standalone/draksound: 4th parameter is not used, i suspect it's not + useful anymore since we pass the value in {sound_slot_index} + + * detect_devices.pm: get rid of the few remaining $LD_LOADER + + * standalone/XFdrake: drop setting $_ (unused) + + * any.pm: get rid of the few remaining $LD_LOADER + don't use $in->{locale} as being $o->{locale} during install, it's much + better to pass $o->{locale} + for finish-install + + * share/list.xml: more tools when debugging install + + * common.pm: use "our" instead of "use vars" + drop untranslate which is unused and bad practice + + * keyboard.pm: DISABLE_WINDOWS_KEY in /etc/sysconfig/keyboard since it is + unused + (AFAIK as i, flepied and lmontel knows) + (it was added by fpons, commit 1.108 on 2001/07/05) + rename load() into builtin_loadkeys() + drop obsolete code (keymaps.cz2 and xmodmap.cz2 are dead since + make_mdkinst_stage2 was dropped) + keyboard::setup() is better named keyboard::setup_install() + reformat keyboard2full_xkb() + create keyboard::configure_xorg() and use it + (and don't call it inside a eval, no error should occur) + + * devices.pm: drop old unused code + + * standalone/net_applet: make perl_checker happy + fix blino sux + + * standalone/harddrake2, standalone/drakboot, standalone/draksplash2, + interactive/newt.pm, standalone/drakbug: make perl_checker happy + + * standalone/drakauth: read existing authentication conf (only minimal + support for now) + + * standalone/drakups: minimal changes to make me and perl_checker happy + + * standalone/localedrake: use any::selectLanguage_and_more_standalone() + + * standalone/fileshareset: use find() (which was unused) + + * bootsplash.pm: + - perl_checker compliance + - use "our" instead of "use vars" + simplify + + * bootloader.pm: remove unused old code + + * network/netconnect.pm: be more in drakx spirit, and more important + perl_checker warning clean + + * pkgs.pm: remove unused code + make perl_checker happy + + * install_steps_interactive.pm: don't use $in->{locale} as being + $o->{locale} during install, it's much better to pass $o->{locale} + + * standalone/keyboarddrake: fix indentation (titi sux) + create keyboard::configure_xorg() and use it + (and don't call it inside a eval, no error should occur) + + * partition_table.pm: remove unused isPrimary + +2005/06/03 Rafael Garcia-Suarez + + * crypto.pm: The mandrakelinux-release package doesn't exist any more, so + you can't + deduce the version from it. Something more robust than this needs to be + figured out. + + * pkgs.pm: Typo fix + +2005/06/03 Thierry Vignaud + + * commands.pm (dd) reuse c:: + (dd) make sysopen() call readable + + * c/stuff.xs.pl: remove doble + add O_CREAT + add O_WRONLY & O_RDWR + + * network/netconnect.pm: help perl_checker + fix pixel sucks + +2005/06/02 Olivier Blin + + * install_steps.pm: random service doesn't exist anymore + +2005/06/02 pjetur + + * share/po/is.po: Tidy up fuzzy messages + Fixes and msg sync + +2005/06/02 Pixel + + * keyboard.pm: make perl_checker happy + - create keyboard::default() and use it + - it uses keyboard::from_DMI() to get XkbModel when possible + + * install_steps.pm: + - create keyboard::default() and use it + - it uses keyboard::from_DMI() to get XkbModel when possible + make perl_checker happy + revert very new titi sucks + + * standalone/keyboarddrake: + - create keyboard::default() and use it + - it uses keyboard::from_DMI() to get XkbModel when possible + + * install_steps_interactive.pm: allow upgrading a chroot (using + drakx-in-chroot) + + * Makefile: helper rule + + * install2.pm: read in existing modprobe.conf on upgrade (bugzilla #13309) + allow upgrading a chroot (using drakx-in-chroot) + + * share/list.xml: allow "perl -d" on install + allow "perl -d" on install + + * install_any.pm: allow upgrading a chroot (using drakx-in-chroot) + create detect_devices::probe_name() & + detect_devices::probe_unique_name() and use them + + * modules/any_conf.pm: read in existing modprobe.conf on upgrade (bugzilla + #13309) + + * Xconfig/monitor.pm, modules.pm, detect_devices.pm, + install_interactive.pm: create detect_devices::probe_name() & + detect_devices::probe_unique_name() and use them + +2005/06/01 Pixel + + * fsedit.pm: auto_install support for creating LABELed devices + + * commands.pm, share/list.xml, Makefile: use command mount instead of + using directly the syscall (allows some cleanup) + + * fs/format.pm: fix typo + set the LABEL after formatting, or drop it if we don't know how to set + it + + * any.pm: allow specifying the uid and gid when creating a user (part of + bugzilla #15190) + add language selection to finish-install + + * standalone/finish-install, standalone/localedrake: add language + selection to finish-install + + * Xconfig/xfree.pm: add many resolutions, but don't allow them yet + + * fs.pm: merge_fstabs doesn't mess around with options anymore in "loose" + mode + ensure reading existing fstab in suggest_mount_points doesn't get its + options + nicer log + use command mount instead of using directly the syscall (allows some + cleanup) + +2005/06/01 Stew Benedict + + * standalone/drakbackup: Tape backup/restore fixes to work with new + .backupignore scheme, +bugs. + +2005/06/01 Thierry Vignaud + + * install_steps.pm (miscellaneousAfter) fix very old uncatched bug + + * install_steps_interactive.pm (acceptLicense) fix exiting step license + + * interactive/gtk.pm (ask_fromW) simplify + (ask_fromW) do not use next in callback + +2005/05/31 Olivier Blin + + * network/isdn.pm: use services::set_status + read I4L_IDLETIME setting + handle huptimeout setting again (I4L_IDLETIME in isdn4net) + + * network/netconnect.pm: + - rename "hw_account" step as "isdn_account" + - remove unneeded code + - don't overwrite huptimeout value + tag obscure isdn card settings as advanced + if__(exists $foo, $bar) returns $bar whatever $foo is, don't try to + make smart code that don't work (initial goal was probably to hide + some isdn settings if they weren't set) + really handle irq, mem, io, io0, io1 isdn paramaters (i.e. finish the + "fix parameters reading/writin in isdn config" commit from Titi) + handle huptimeout setting again (I4L_IDLETIME in isdn4net) + + * standalone/drakconnect: remove dead code + + * standalone/finish-install: remove unneded modules loading ('net' + category is deprecated for ages) + +2005/05/31 Pablo Saratxaga + + * share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po, + share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po, + share/po/hr.po, share/po/be.po, share/po/pa_IN.po, share/po/ko.po, + share/po/DrakX.pot, share/po/sv.po, share/po/sr.po, share/po/pl.po, + share/po/fi.po, share/po/he.po, share/po/ca.po, share/po/da.po, + share/po/ar.po, share/po/ltg.po, share/po/nb.po, share/po/ky.po, + share/po/uz.po, share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po, + share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po, + share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po, + share/po/id.po, share/po/ru.po, share/po/sc.po, share/po/br.po, + share/po/sl.po, share/po/nn.po, share/po/tr.po, share/po/mt.po, + share/po/ga.po, share/po/mn.po, share/po/uk.po, share/po/am.po, + share/po/lt.po, share/po/cy.po, share/po/tg.po, share/po/bs.po, + share/po/fur.po, share/po/mk.po, share/po/wa.po, share/po/is.po, + share/po/hi.po, share/po/af.po, share/po/az.po, share/po/pt.po, + share/po/vi.po, share/po/fr.po, share/po/ta.po, share/po/nl.po, + share/po/de.po, share/po/tl.po, share/po/eo.po, share/po/bg.po, + share/po/cs.po, share/po/el.po, share/po/uz@Latn.po: updated pot file + +2005/05/31 Pixel + + * lang.pm: for drakx-finish-install + + * standalone/drakedm: adding back translation of descriptions for some + known display managers + +2005/05/31 Thierry Vignaud + + * share/po/fr.po: update + +2005/05/31 willysr + + * share/po/id.po: Updated + +2005/05/30 Olivier Blin + + * network/netconnect.pm: move netprofile stuff in network::network + add missing closing brace + external isdn modems don't require the "isdn_dial_on_boot" step + $netc->{isdntype} is unneeded + simply isdn external modem code (remove $netcnx->{isdn_external}) + use network::thirdparty for modem devices + + * any.pm, network/network.pm, standalone/net_applet: move netprofile stuff + in network::network + + * network/thirdparty.pm: add no_club option to specify that no club + drivers are available (ECI) + allow to ask for some configuration fields (useful for "device" in "rtc" + category) + + * network/isdn.pm: remove unneeded comments + +2005/05/30 Pixel + + * install2.pm: don't skip selectLanguage, selectKeyboard and miscellaneous + by default in drakx-in-chroot + remove dead code + make drakx-in-chroot work + + * standalone/drakedm: + - don't use hard written entries anymore + - display the entries sorted as given + - simplify code using more drakx functions + look for *.conf + + * pkgs.pm: don't kill runaway processes in drakx-in-chroot since we don't + detect wether those are runaway processes or normal processes + + * install_steps_interactive.pm: button "Reboot" is better called "Quit" + for chrooted installs + + * install_steps.pm, tools/drakx-in-chroot, install_any.pm: make + drakx-in-chroot work + +2005/05/30 Thierry Vignaud + + * drakxtools.spec: fix spacing in 10.3-0.20mdk's changelog + 10.3-0.20mdk + + * modules.pm (write_preload_conf) factorize modules managment + (write_preload_conf) simplify DVB & TV managment through + probe_category() + + * standalone/service_harddrake: load drivers for newly added devices so + that they work out of the box on first + boot after card plugging for the following categorys: AGP ATA_STORAGE + DVB + SATA_STORAGE SCSI_CONTROLLER TV + +2005/05/29 Till Kamppeter + + * printer/main.pm: + - Support for PPD file names with spaces (bug #16172). + +2005/05/28 sharuzzaman + + * share/po/ms.po: Updated Malay translation + +2005/05/27 Olivier Blin + + * common.pm: update comment + + * network/netconnect.pm, network/tools.pm, network/thirdparty.pm: initial + import of network::thirdparty (this module factorizes the thirdparty + software/drivers/firmwares detection and installation code, it points + the user to the relevant packages/documentation/url if needed, and don't + allow to configure a device if its requirements aren't satisfied) + +2005/05/27 Pixel + + * standalone/drakedm: handle /etc/X11/dm.d/* entries (as proposed by Loic + Baudry) + + * install_steps.pm: kderc_largedisplay() is no more needed + kfm is gone for some time + - since set_security doesn't depend on the bootloader password, we can + call it where it should + - ensure we don't drop entries from /etc/sysconfig/system + remove unused and obsolete code + - CLASS in /etc/sysconfig/system is deprected (is always "beginner") + - SECURITY in /etc/sysconfig/system is unused (and always was) + + * drakxtools.spec: we need latest perl-MDK-Common + + * bootloader.pm: fix typo in comment + + * security/various.pm: use addVarsInSh() + + * install_any.pm: kderc_largedisplay() is no more needed + kfm is gone for some time + don't set DRAKX_PASSWORD and DURING_INSTALL for msec since msec doesn't + care about them anymore + replace $o->{localInstall} with $::local_install + + * install2.pm: + - since set_security doesn't depend on the bootloader password, we can + call it where it should + - ensure we don't drop entries from /etc/sysconfig/system + +2005/05/27 Rafael Garcia-Suarez + + * pkgs.pm: Comment fixes, remove noisy log + Remove the naming convention with a trailing "s" for supplementary CDs + medium ids + + * install_any.pm: Comment fixes, remove noisy log + Remove the naming convention with a trailing "s" for supplementary CDs + medium ids + Remove unused function + +2005/05/27 Thierry Vignaud + + * lang.pm (get_ims) rollback debug statement + enable to select extra SCIM combinaisons: scim+anthy, scim+canna, + scim+fcitx, scim+m17n, scim+prime, and scim+skk; + + * any.pm (selectCountry) fix warning and cleanup + (selectCountry) display SCIM combinaisons in a sub menu + + * interactive/gtk.pm (ask_fromW) fix set/get from sub leaf of ComboBox + with tree + + * drakxtools.spec: 10.3-0.19mdk + + * share/po/br.po: update + +2005/05/26 Olivier Blin + + * network/shorewall.pm: create $ask_shorewall_interface_label, + shorewall_interface_choices() + and set_net_interface() out of ask_shorewall_interface() to avoid code + duplication + perl_checker fixes + better way to handle squid ports (read shorewall REDIRECT rules in + network::shorewall::read to avoid tricks in network::shorewall::write) + read_squid_conf() is now in network::squid + simplify check_iptables() + + * standalone/drakgw: remove debug code + check_iptables() doesn't need a $in object anymore + add "choose_net_interface" step to have a real wizard step when asking + net interface + better way to handle squid ports (read shorewall REDIRECT rules in + network::shorewall::read to avoid tricks in network::shorewall::write) + + * standalone/draksplash: + - use scrollbar in preview window + - try not to be larger than screen size minus toolbars size + - close_window -> close_all + +2005/05/26 Pixel + + * share/devices: /dev/tty is needed to debug stage2 + + * lang.pm: for drakx-finish-install + + * tools/install-xml-file-list: + - enhance script so that we don't have to list bsh + - add bash when DEBUG_INSTALL + - handle tag + - hide some stuff when non verbose + + * share/list.xml: + - enhance script so that we don't have to list bsh + - add bash when DEBUG_INSTALL + - add stuff to enable perl debugging when DEBUG_INSTALL is set + - ash is now a symlink, add bsh + + * Makefile.config, commands, install2, share/aliases: switch from + /usr/bin/perl-install to /usr/lib/libDrakX + + * install_steps_gtk.pm, tools/drakx-in-chroot, install2.pm, modules.pm: + replace unused $o->{localInstall} with $::local_install, partially used + instead of $::uml_install + and used in drakx-in-chroot + + * share/symlinks: /etc/termcap is needed for perl debugging + +2005/05/26 Rafael Garcia-Suarez + + * install_any.pm: Factorize and ensure checking main installation method + Don't use the \d+s regexp on medium ids to see if that's suppl cds. + More refactorisation + + * pkgs.pm: Show the "downloading hdlist" wait box only when downloading + hdlist from a network medium + Remove spurious field + More refactorisation + + * install_steps.pm, install_steps_gtk.pm, install_steps_interactive.pm: + More refactorisation + +2005/05/26 Thierry Vignaud + + * drakxtools.spec: 10.3-0.18mdk + + * share/rpmsrate: help emacs somewhat + list alternative IMs so that they're on CDs (in order not to break + updates): + + * interactive.pm (ask_from_normalize) since we can now use ComboBoxes with + trees, do + not use big TreeView instead of small ComboBox when not asked for + + * detect_devices.pm (getSCSI_26) fix of by one error resulting in + misdetecing USB mass + storage devices (#13569) + + * interactive/gtk.pm (ask_fromW) help perl_checker + fix setting a combobox with a tree + (__create_tree_model, create_treeview_tree, ask_fromW) enable to use + ComboBoxes with trees + + * lang.pm: enable to select scim+uim again + install needed packages for kinput2 + +2005/05/25 José JORGE + + * share/po/pt.po: melo + +2005/05/25 Olivier Blin + + * network/shorewall.pm: use if_() + + * standalone/net_applet: let user call drakroam (#16019) + +2005/05/25 Rafael Garcia-Suarez + + * install_steps_gtk.pm, crypto.pm, install_any.pm, + install_steps_interactive.pm: Begin refactorization of install medium + handling code + + * pkgs.pm: Mark an argument as optional + Begin refactorization of install medium handling code + +2005/05/25 Thierry Vignaud + + * share/rpmsrate: rollback clean_rpmsrate's changes + install both as10k1 and ld10k1 for both snd-emu10k1 and snd-emu10k1x + driven sound cards + +2005/05/24 Olivier Blin + + * network/netconnect.pm: remove unneeded trick since network::network + always update NETWORK and + BROADCAST now + + * network/shorewall.pm: + - split warning out of check_iptables() + - get_default_device() -> get_ifcfg_interface() + - get_net_device() -> get_shorewall_interface() + - create ask_shorewall_interface() out of default_interfaces() + - create read_default_interfaces() to replace default_interfaces() and + default_interfaces_silent() + - use services::set_status() in write() + + * network/network.pm: + - move read_dhcpd_conf() in network::dhcpd + - move read_squid_conf() in network::squid + - create update_broadcast_and_network() and force NETWORK and + BROADCAST variables update + + * run_program.pm: fix return code when chroot can't be done + + * standalone/drakgw: + - wizardify + - allow not to enable DNS, dhcpd and proxy servers + - allow not to enable CUPS broadcast + - use @IF (network interface) instead of network address in CUPS + configuration + + * network/squid.pm: initial import, move read_squid_conf() from + network::network and split write_squid_conf() from drakgw + + * network/dhcpd.pm: initial import, move read_dhcpd_conf() from + network::network and split write_dhcpd_conf() from drakgw + + * services.pm: + - introduce set_status(), restart_or_start() and service_exists() + - cleanups (use run_program success status) + +2005/05/24 Pixel + + * share/devices: fix typo + + * pkgs.pm: ensure {needToCopy} is not dropped when calling read_rpmsrate() + more than once + +2005/05/24 Rafael Garcia-Suarez + + * install_any.pm: Modernize, remove old code + +2005/05/24 Thierry Vignaud + + * drakxtools.spec: 10.3-0.17mdk + + * share/rpmsrate: list sb16_csp only once + +2005/05/23 Pixel + + * rescue/Makefile: finish moving from list to list.xml + + * rescue/make_rescue_img, Makefile: + - create kernel/RPMS/ to copy rpms before expanding them in + kernel/all.kernels + - remove old compatability code + - add some doc in update_kernel + +2005/05/23 Thierry Vignaud + + * harddrake/data.pm: use mousedrake to configure tablets & touchscreens + + * share/po/fr.po: typo fix (blino) + + * share/rpmsrate: install sb16_csp for SB sound cards + install ld10k1 for snd-emu10k1 and snd-emu10k1x + install hdspconf for snd-hdsp + 2005/05/22 Funda Wang * share/po/zh_CN.po: Updated simplified Chinese translation. @@ -49903,7 +50885,7 @@ * Makefile.config: remove dir security - * proxy.pm: add $Id: ChangeLog,v 1.1039 2005/04/12 13:43:17 prigaux Exp $ + * proxy.pm: add $Id: ChangeLog,v 1.1040 2005/05/23 05:27:58 prigaux Exp $ * interactive/gtk.pm: use my_gtk {isWizard} and {isEmbedded} which are more accurate than -- cgit v1.2.1