From 5d88e839f68d56cdb20dc1fe906c3b2239350fb1 Mon Sep 17 00:00:00 2001 From: Pablo Saratxaga Date: Tue, 11 Sep 2001 15:03:19 +0000 Subject: updated Hungarian file; updated pot file --- perl-install/share/po/DrakX.pot | 805 ++++++++++++++++++++-------------------- 1 file changed, 401 insertions(+), 404 deletions(-) diff --git a/perl-install/share/po/DrakX.pot b/perl-install/share/po/DrakX.pot index 59776f3c7..1279072e6 100644 --- a/perl-install/share/po/DrakX.pot +++ b/perl-install/share/po/DrakX.pot @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2001-09-10 20:37+0200\n" +"POT-Creation-Date: 2001-09-11 14:12+0200\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -211,8 +211,8 @@ msgstr "" msgid "XFree86 server: %s" msgstr "" -#: ../../Xconfigurator.pm_.c:771 ../../standalone/draknet_.c:293 -#: ../../standalone/draknet_.c:296 +#: ../../Xconfigurator.pm_.c:771 ../../standalone/draknet_.c:294 +#: ../../standalone/draknet_.c:297 msgid "Expert Mode" msgstr "" @@ -533,14 +533,14 @@ msgid "Delay before booting default image" msgstr "" #: ../../any.pm_.c:162 ../../any.pm_.c:735 -#: ../../install_steps_interactive.pm_.c:934 ../../network/modem.pm_.c:46 +#: ../../install_steps_interactive.pm_.c:933 ../../network/modem.pm_.c:46 #: ../../printerdrake.pm_.c:376 ../../printerdrake.pm_.c:450 -#: ../../standalone/draknet_.c:595 +#: ../../standalone/draknet_.c:596 msgid "Password" msgstr "" #: ../../any.pm_.c:163 ../../any.pm_.c:736 -#: ../../install_steps_interactive.pm_.c:935 +#: ../../install_steps_interactive.pm_.c:934 msgid "Password (again)" msgstr "" @@ -575,12 +575,12 @@ msgid "" msgstr "" #: ../../any.pm_.c:176 ../../any.pm_.c:712 -#: ../../install_steps_interactive.pm_.c:929 +#: ../../install_steps_interactive.pm_.c:928 msgid "Please try again" msgstr "" #: ../../any.pm_.c:176 ../../any.pm_.c:712 -#: ../../install_steps_interactive.pm_.c:929 +#: ../../install_steps_interactive.pm_.c:928 msgid "The passwords do not match" msgstr "" @@ -720,12 +720,12 @@ msgid "Do you have any %s interfaces?" msgstr "" #: ../../any.pm_.c:606 ../../any.pm_.c:765 ../../interactive.pm_.c:112 -#: ../../my_gtk.pm_.c:674 +#: ../../my_gtk.pm_.c:678 msgid "No" msgstr "" #: ../../any.pm_.c:606 ../../any.pm_.c:764 ../../interactive.pm_.c:112 -#: ../../my_gtk.pm_.c:674 +#: ../../my_gtk.pm_.c:678 msgid "Yes" msgstr "" @@ -875,7 +875,7 @@ msgstr "" msgid "You can choose other languages that will be available after install" msgstr "" -#: ../../any.pm_.c:789 ../../install_steps_interactive.pm_.c:633 +#: ../../any.pm_.c:789 ../../install_steps_interactive.pm_.c:632 msgid "All" msgstr "" @@ -989,7 +989,7 @@ msgid "" msgstr "" #: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:642 -#: ../../standalone/draknet_.c:275 ../../standalone/tinyfirewall_.c:57 +#: ../../standalone/draknet_.c:276 ../../standalone/tinyfirewall_.c:57 msgid "Configure" msgstr "" @@ -1013,22 +1013,22 @@ msgstr "" msgid "Yes, I want autologin with this (user, desktop)" msgstr "" -#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:107 -#: ../../standalone/draknet_.c:139 ../../standalone/draknet_.c:203 -#: ../../standalone/draknet_.c:315 ../../standalone/draknet_.c:425 -#: ../../standalone/draknet_.c:499 ../../standalone/draknet_.c:535 -#: ../../standalone/draknet_.c:636 +#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108 +#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:204 +#: ../../standalone/draknet_.c:316 ../../standalone/draknet_.c:426 +#: ../../standalone/draknet_.c:500 ../../standalone/draknet_.c:536 +#: ../../standalone/draknet_.c:637 msgid "OK" msgstr "" #: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:505 #: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286 #: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27 -#: ../../my_gtk.pm_.c:415 ../../my_gtk.pm_.c:418 ../../my_gtk.pm_.c:675 +#: ../../my_gtk.pm_.c:415 ../../my_gtk.pm_.c:418 ../../my_gtk.pm_.c:679 #: ../../printerdrake.pm_.c:982 ../../standalone/drakgw_.c:647 -#: ../../standalone/draknet_.c:114 ../../standalone/draknet_.c:146 -#: ../../standalone/draknet_.c:308 ../../standalone/draknet_.c:511 -#: ../../standalone/draknet_.c:650 ../../standalone/tinyfirewall_.c:63 +#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147 +#: ../../standalone/draknet_.c:309 ../../standalone/draknet_.c:512 +#: ../../standalone/draknet_.c:651 ../../standalone/tinyfirewall_.c:63 msgid "Cancel" msgstr "" @@ -1086,7 +1086,7 @@ msgstr "" msgid "Read carefully!" msgstr "" -#: ../../diskdrake.pm_.c:104 +#: ../../diskdrake.pm_.c:103 msgid "" "If you plan to use aboot, be carefull to leave a free space (2048 sectors is " "enough)\n" @@ -1096,7 +1096,7 @@ msgstr "" #: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313 #: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72 #: ../../install_steps_interactive.pm_.c:37 -#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119 +#: ../../install_steps_interactive.pm_.c:309 ../../interactive_http.pm_.c:119 #: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62 msgid "Error" msgstr "" @@ -1547,7 +1547,7 @@ msgid "Formatting loopback file %s" msgstr "" #: ../../diskdrake_interactive.pm_.c:637 ../../diskdrake_interactive.pm_.c:879 -#: ../../install_steps_interactive.pm_.c:419 +#: ../../install_steps_interactive.pm_.c:418 #, c-format msgid "Formatting partition %s" msgstr "" @@ -1867,32 +1867,31 @@ msgstr "" #: ../../help.pm_.c:7 msgid "" "GNU/Linux is a multiuser system, and this means that each user can have his\n" -"own preferences, his own files and so on. You can read the `A<<`User " -"Guide''\n" -"to learn more. But unlike root, which is the administrator, the users you\n" -"will add here will not be entitled to change anything except their own\n" +"own preferences, his own files and so on. You can read the ``User Guide''\n" +"to learn more. But unlike \"root\", which is the administrator, the users\n" +"you will add here will not be entitled to change anything except their own\n" "files and their own configuration. You will have to create at least one\n" "regular user for yourself. That account is where you should log in for\n" -"routine use. Although it is very practical to log in as root everyday, it\n" -"may also be very dangerous! The slightest mistake could mean that your\n" +"routine use. Although it is very practical to log in as \"root\" everyday,\n" +"it may also be very dangerous! The slightest mistake could mean that your\n" "system would not work any more. If you make a serious mistake as a regular\n" "user, you may only lose some information, but not the entire system.\n" "\n" "First, you have to enter your real name. This is not mandatory, of course -\n" "as you can actually enter whatever you want. DrakX will then take the first\n" -"word you have entered in the box and will bring it over to the User name.\n" -"This is the name this particular user will use to log into the system. You\n" -"can change it. You then have to enter a password here. A non-privileged\n" -"(regular) user's password is not as crucial as that of root from a security\n" -"point of view, but that is no reason to neglect it - after all, your files\n" -"are at risk.\n" +"word you have entered in the box and will bring it over to the \"User\n" +"name\". This is the name this particular user will use to log into the\n" +"system. You can change it. You then have to enter a password here. A\n" +"non-privileged (regular) user's password is not as crucial as that of\n" +"\"root\" from a security point of view, but that is no reason to neglect it\n" +"- after all, your files are at risk.\n" "\n" -"If you click on Accept user, you can then add as many as you want. Add a\n" -"user for each one of your friends: your father or your sister, for example.\n" -"When you finish adding all the users you want, select Done.\n" +"If you click on \"Accept user\", you can then add as many as you want. Add\n" +"a user for each one of your friends: your father or your sister, for\n" +"example. When you finish adding all the users you want, select \"Done\".\n" "\n" -"Clicking the Advanced button allows you to change the default shell for\n" -"that user (bash by default)." +"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n" +"for that user (bash by default)." msgstr "" #: ../../help.pm_.c:35 @@ -1900,9 +1899,9 @@ msgid "" "Listed above are the existing Linux partitions detected on your hard drive.\n" "You can keep the choices made by the wizard, they are good for most common\n" "installs. If you make any changes, you must at least define a root\n" -"partition (\"/\"). Do not choose too small a partition or you will not be\n" -"able to install enough software. If you want to store your data on a\n" -"separate partition, you will also need to create a partition for /home\n" +"partition (\"/\"). Do not choose too small a partition or you will not\n" +"be able to install enough software. If you want to store your data on a\n" +"separate partition, you will also need to create a partition for \"/home\"\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" @@ -1944,7 +1943,7 @@ msgid "" "If you are performing a standard installation from CDROM, you will first be\n" "asked to specify the CDs you currently have. Check the CD labels and\n" "highlight the boxes corresponding to the CDs you have available for\n" -"installation. Click OK when you are ready to continue.\n" +"installation. Click \"OK\" when you are ready to continue.\n" "\n" "Packages are sorted in groups corresponding to a particular use of your\n" "machine. The groups themselves are sorted into four sections:\n" @@ -1967,7 +1966,7 @@ msgid "" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group.\n" "\n" -"Clicking the Advanced button will allow you to select the \"Individual\n" +"Clicking the \"Advanced\" button will allow you to select the \"Individual\n" "package selection\" option. This is useful if you are familiar with the\n" "packages being offered or if you want to have total control over what will\n" "be installed.\n" @@ -1985,8 +1984,8 @@ msgid "" "groups, subgroups, or individual packages.\n" "\n" "Whenever you select a package on the tree, a description appears on the\n" -"right. When your selection is finished, click the Install button which will\n" -"then launch the installation process. Depending on the speed of your\n" +"right. When your selection is finished, click the \"Install\" button which\n" +"will then launch the installation process. Depending on the speed of your\n" "hardware and the number of packages that need to be installed, it may take\n" "a while to complete the process. A time to complete estimate is displayed\n" "on the screen to help you gauge if there is sufficient time to enjoy a cup\n" @@ -1999,8 +1998,9 @@ msgid "" "no known issues at the time the distribution was shipped, it may happen\n" "that security holes are discovered after this version of Mandrake Linux was\n" "finalized. If you do not know what a particular service is supposed to do\n" -"or why it is being installed, then click No. Clicking Yes will install the\n" -"listed services and they will be started automatically by default. !!\n" +"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n" +"install the listed services and they will be started automatically by\n" +"default. !!\n" "\n" "The \"Automatic dependencies\" option simply disables the warning dialog\n" "which appears whenever the installer automatically selects a package. This\n" @@ -2014,7 +2014,7 @@ msgid "" "a floppy." msgstr "" -#: ../../help.pm_.c:145 +#: ../../help.pm_.c:146 msgid "" "If you wish to connect your computer to the Internet or to a local network,\n" "please choose the correct option. Please turn on your device before\n" @@ -2034,10 +2034,10 @@ msgid "" "use the program described there to configure your connection.\n" "\n" "If you wish to configure the network later after installation or if you\n" -"have finished configuring your network connection, click Cancel." +"have finished configuring your network connection, click \"Cancel\"." msgstr "" -#: ../../help.pm_.c:166 +#: ../../help.pm_.c:167 msgid "" "You may now choose which services you wish to start at boot time.\n" "\n" @@ -2055,15 +2055,15 @@ msgid "" "enabled on a server. In general, select only the services you really need." msgstr "" -#: ../../help.pm_.c:182 +#: ../../help.pm_.c:183 msgid "" "GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n" "local time according to the time zone you selected.\n" "\n" -"If you use Microsoft Windows on this computer, choose No." +"If you use Microsoft Windows on this computer, choose \"No\"." msgstr "" -#: ../../help.pm_.c:188 +#: ../../help.pm_.c:189 msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" "on which all the graphics environments (KDE, Gnome, AfterStep,\n" @@ -2079,13 +2079,13 @@ msgid "" "wizard. See the corresponding section of the manual for more information\n" "about this wizard.\n" "\n" -"If you can see the message and answer Yes, then DrakX will proceed to the\n" -"next step. If you cannot see the message, it simply means that the\n" +"If you can see the message and answer \"Yes\", then DrakX will proceed to\n" +"the next step. If you cannot see the message, it simply means that the\n" "configuration was wrong and the test will automatically end after 10\n" "seconds, restoring the screen." msgstr "" -#: ../../help.pm_.c:208 +#: ../../help.pm_.c:209 msgid "" "The first time you try the X configuration, you may not be very satisfied\n" "with its display (screen is too small, shifted left or right...). Hence,\n" @@ -2093,22 +2093,22 @@ msgid "" "suits you. It will also propose to change it by displaying a list of valid\n" "modes it could find, asking you to select one.\n" "\n" -"As a last resort, if you still cannot get X to work, choose Change graphics\n" -"card, select Unlisted card, and when prompted on which server you want,\n" -"choose FBDev. This is a failsafe option which works with any modern\n" -"graphics card. Then choose Test again to be sure." +"As a last resort, if you still cannot get X to work, choose \"Change\n" +"graphics card\", select \"Unlisted card\", and when prompted on which\n" +"server you want, choose \"FBDev\". This is a failsafe option which works\n" +"with any modern graphics card. Then choose \"Test again\" to be sure." msgstr "" -#: ../../help.pm_.c:220 +#: ../../help.pm_.c:221 msgid "" "Finally, you will be asked whether you want to see the graphical interface\n" "at boot. Note this question will be asked even if you chose not to test the\n" -"configuration. Obviously, you want to answer No if your machine is to act\n" -"as a server, or if you were not successful in getting the display\n" +"configuration. Obviously, you want to answer \"No\" if your machine is to\n" +"act as a server, or if you were not successful in getting the display\n" "configured." msgstr "" -#: ../../help.pm_.c:227 +#: ../../help.pm_.c:228 msgid "" "The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n" "booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n" @@ -2136,7 +2136,7 @@ msgid "" "the whole disk." msgstr "" -#: ../../help.pm_.c:251 +#: ../../help.pm_.c:252 msgid "" "At this point you need to choose where on your hard drive to install your\n" "Mandrake Linux operating system. If your hard drive is empty or if an\n" @@ -2152,8 +2152,8 @@ msgid "" "If you are running the install in Expert mode, you will enter DiskDrake,\n" "the Mandrake Linux partitioning tool, which allows you to fine-tune your\n" "partitions. See the DiskDrake chapter of the manual. From the installation\n" -"interface, you can use the wizards as described here by clicking the Wizard\n" -"button of the dialog.\n" +"interface, you can use the wizards as described here by clicking the\n" +"\"Wizard\" button of the dialog.\n" "\n" "If partitions have already been defined, either from a previous\n" "installation or from another partitioning tool, simply select those to\n" @@ -2163,15 +2163,14 @@ msgid "" "wizard. Depending on your hard drive configuration, several options are\n" "available:\n" "\n" -" * Use free space: this option will simply lead to an automatic " -"partitioning\n" -"of your blank drive(s). You will not be prompted further.\n" +" * \"Use free space\": this option will simply lead to an automatic\n" +"partitioning of your blank drive(s). You will not be prompted further.\n" "\n" -" * Use existing partition: the wizard has detected one or more existing\n" +" * \"Use existing partition\": the wizard has detected one or more existing\n" "Linux partitions on your hard drive. If you want to use them, choose this\n" "option.\n" "\n" -" * Use the free space on the Windows partition: if Microsoft Windows is\n" +" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n" "installed on your hard drive and takes all the space available on it, you\n" "have to create free space for Linux data. To do that, you can delete your\n" "Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n" @@ -2185,52 +2184,50 @@ msgid "" "present time. You will have less free space under Microsoft Windows to\n" "store your data or to install new software.\n" "\n" -" * Erase entire disk: if you want to delete all data and all partitions\n" +" * \"Erase entire disk\": if you want to delete all data and all partitions\n" "present on your hard drive and replace them with your new Mandrake Linux\n" "system, choose this option. Be careful with this solution because you will\n" "not be able to revert your choice after confirmation.\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" -" * Remove Windows: this will simply erase everything on the drive and begin\n" -"fresh, partitioning everything from scratch. All data on your disk will be\n" -"lost.\n" +" * \"Remove Windows\": this will simply erase everything on the drive and\n" +"begin fresh, partitioning everything from scratch. All data on your disk\n" +"will be lost.\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" -" * Expert mode: choose this option if you want to manually partition your\n" -"hard drive. Be careful - it is a powerful but dangerous choice. You can\n" -"very easily lose all your data. Hence, do not choose this unless you know\n" -"what you are doing." +" * \"Expert mode\": choose this option if you want to manually partition\n" +"your hard drive. Be careful - it is a powerful but dangerous choice. You\n" +"can very easily lose all your data. Hence, do not choose this unless you\n" +"know what you are doing." msgstr "" -#: ../../help.pm_.c:315 +#: ../../help.pm_.c:316 msgid "" "There you are. Installation is now complete and your GNU/Linux system is\n" -"ready to use. Just click OK to reboot the system. You can start GNU/Linux\n" -"or Windows, whichever you prefer (if you are dual-booting), as soon as the\n" -"computer has booted up again.\n" +"ready to use. Just click \"OK\" to reboot the system. You can start\n" +"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n" +"soon as the computer has booted up again.\n" "\n" -"The Advanced button shows two more buttons to:\n" +"The \"Advanced\" button shows two more buttons to:\n" "\n" -" * generate auto-install floppy: to create an installation floppy disk " -"which\n" -"will automatically perform a whole installation without the help of an\n" -"operator, similar to the installation you just configured.\n" +" * \"generate auto-install floppy\": to create an installation floppy disk\n" +"which will automatically perform a whole installation without the help of\n" +"an operator, similar to the installation you just configured.\n" "\n" " Note that two different options are available after clicking the button:\n" "\n" -" * Replay. This is a partially automated install as the partitioning " -"step\n" -"(and only this one) remains interactive.\n" +" * \"Replay\". This is a partially automated install as the partitioning\n" +"step (and only this one) remains interactive.\n" "\n" -" * Automated. Fully automated install: the hard disk is completely\n" +" * \"Automated\". Fully automated install: the hard disk is completely\n" "rewritten, all data is lost.\n" "\n" " This feature is very handy when installing a great number of similar\n" "machines. See the Auto install section at our web site.\n" "\n" -" * Save packages selection(*): saves the packages selection as made\n" +" * \"Save packages selection\"(*): saves the packages selection as made\n" "previously. Then, when doing another installation, insert the floppy inside\n" "the driver and run the installation going to the help screen by pressing on\n" "the F1 key, and by issuing >>linux defcfg=\"floppy\"<<.\n" @@ -2239,7 +2236,7 @@ msgid "" "\"mformat a:\")" msgstr "" -#: ../../help.pm_.c:346 +#: ../../help.pm_.c:347 msgid "" "Any partitions that have been newly defined must be formatted for use\n" "(formatting means creating a file system).\n" @@ -2250,23 +2247,24 @@ msgid "" "\n" "Please note that it is not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" -"system (such as /, /usr or /var) but you do not have to reformat partitions\n" -"containing data that you wish to keep (typically /home).\n" +"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n" +"reformat partitions containing data that you wish to keep (typically\n" +"\"/home\").\n" "\n" "Please be careful when selecting partitions. After formatting, all data on\n" "the selected partitions will be deleted and you will not be able to recover\n" "any of them.\n" "\n" -"Click on OK when you are ready to format partitions.\n" +"Click on \"OK\" when you are ready to format partitions.\n" "\n" -"Click on Cancel if you want to choose another partition for your new\n" +"Click on \"Cancel\" if you want to choose another partition for your new\n" "Mandrake Linux operating system installation.\n" "\n" -"Click on Advanced if you wish to select partitions that will be checked for\n" -"bad blocks on the disc." +"Click on \"Advanced\" if you wish to select partitions that will be checked\n" +"for bad blocks on the disc." msgstr "" -#: ../../help.pm_.c:371 +#: ../../help.pm_.c:373 msgid "" "Your new Mandrake Linux operating system is currently being installed.\n" "Depending on the number of packages you will be installing and the speed of\n" @@ -2276,29 +2274,28 @@ msgid "" "Please be patient." msgstr "" -#: ../../help.pm_.c:379 +#: ../../help.pm_.c:381 msgid "" "Before continuing you should read carefully the terms of the license. It\n" "covers the whole Mandrake Linux distribution, and if you do not agree with\n" -"all the terms in it, click on the Refuse button which will immediately\n" +"all the terms in it, click on the \"Refuse\" button which will immediately\n" "terminate the installation. To continue with the installation, click the\n" -"Accept button." +"\"Accept\" button." msgstr "" -#: ../../help.pm_.c:386 +#: ../../help.pm_.c:388 msgid "" "At this point, it is time to choose the security level desired for the\n" "machine. As a rule of thumb, the more exposed the machine is, and the more\n" "the data stored in it is crucial, the higher the security level should be.\n" "However, a higher security level is generally obtained at the expenses of\n" -"easiness of use. Refer to the MSEC chapter of the `A<<`Reference Manual'' " -"to\n" +"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n" "get more information about the meaning of these levels.\n" "\n" "If you do not know what to choose, keep the default option." msgstr "" -#: ../../help.pm_.c:396 +#: ../../help.pm_.c:398 msgid "" "At this point, you need to choose what partition(s) will be used for the\n" "installation of your Mandrake Linux system. If partitions have been already\n" @@ -2312,35 +2309,35 @@ msgid "" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" -" * Clear all: this option deletes all partitions on the selected hard " +" * \"Clear all\": this option deletes all partitions on the selected hard\n" "drive.\n" "\n" -" * Auto allocate: this option allows you to automatically create Ext2 and\n" -"swap partitions in free space of your hard drive.\n" +" * \"Auto allocate\": this option allows you to automatically create Ext2\n" +"and swap partitions in free space of your hard drive.\n" "\n" -" * Rescue partition table: if your partition table is damaged, you can try\n" -"to recover it using this option. Please be careful and remember that it can\n" -"fail.\n" +" * \"Rescue partition table\": if your partition table is damaged, you can\n" +"try to recover it using this option. Please be careful and remember that it\n" +"can fail.\n" "\n" -" * Undo: use this option to cancel your changes.\n" +" * \"Undo\": use this option to cancel your changes.\n" "\n" -" * Reload: you can use this option if you wish to undo all changes and load\n" -"your initial partitions table.\n" +" * \"Reload\": you can use this option if you wish to undo all changes and\n" +"load your initial partitions table.\n" "\n" -" * Wizard: use this option if you wish to use a wizard to partition your\n" +" * \"Wizard\": use this option if you wish to use a wizard to partition " +"your\n" "hard drive. This is recommended if you do not have a good knowledge of\n" "partitioning.\n" "\n" -" * Restore from floppy: this option will allow you to restore a previously\n" -"saved partition table from floppy disk.\n" +" * \"Restore from floppy\": this option will allow you to restore a\n" +"previously saved partition table from floppy disk.\n" "\n" -" * Save to floppy: saves the partition table to a floppy. Useful for later\n" -"partition-table recovery if necessary. It is strongly recommended to\n" +" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n" +"later partition-table recovery if necessary. It is strongly recommended to\n" "perform this step.\n" "\n" -" * Done: when you have finished partitioning your hard drive, this will " -"save\n" -"your changes back to disc.\n" +" * \"Done\": when you have finished partitioning your hard drive, this will\n" +"save your changes back to disc.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using Tab and Up/Down arrows.\n" @@ -2360,7 +2357,7 @@ msgid "" "emergency boot situations." msgstr "" -#: ../../help.pm_.c:454 +#: ../../help.pm_.c:457 msgid "" "More than one Microsoft Windows partition has been detected on your hard\n" "drive. Please choose the one you want resize in order to install your new\n" @@ -2393,11 +2390,11 @@ msgid "" "disk or partition is called \"C:\")." msgstr "" -#: ../../help.pm_.c:485 +#: ../../help.pm_.c:488 msgid "Please be patient. This operation can take several minutes." msgstr "" -#: ../../help.pm_.c:488 +#: ../../help.pm_.c:491 msgid "" "DrakX now needs to know if you want to perform a default (\"Recommended\")\n" "installation or if you want to have greater control (\"Expert\"). You also\n" @@ -2426,7 +2423,7 @@ msgid "" "this unless you know what you are doing." msgstr "" -#: ../../help.pm_.c:515 +#: ../../help.pm_.c:518 msgid "" "Normally, DrakX selects the right keyboard for you (depending on the\n" "language you have chosen) and you will not even see this step. However, you\n" @@ -2437,26 +2434,26 @@ msgid "" "cases, you will have to go back to this installation step and select an\n" "appropriate keyboard from the list.\n" "\n" -"Click on the More button to be presented with the complete list of\n" +"Click on the \"More\" button to be presented with the complete list of\n" "supported keyboards." msgstr "" -#: ../../help.pm_.c:528 +#: ../../help.pm_.c:531 msgid "" "Please choose your preferred language for installation and system usage.\n" "\n" -"Clicking on the Advanced button will allow you to select other languages to\n" -"be installed on your workstation. Selecting other languages will install\n" -"the language-specific files for system documentation and applications. For\n" -"example, if you will host users from Spain on your machine, select English\n" -"as the main language in the tree view and in the Advanced section click on\n" -"the grey star corresponding to \"Spanish|Spain\".\n" +"Clicking on the \"Advanced\" button will allow you to select other\n" +"languages to be installed on your workstation. Selecting other languages\n" +"will install the language-specific files for system documentation and\n" +"applications. For example, if you will host users from Spain on your\n" +"machine, select English as the main language in the tree view and in the\n" +"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n" "\n" "Note that multiple languages may be installed. Once you have selected any\n" -"additional locales click the OK button to continue." +"additional locales click the \"OK\" button to continue." msgstr "" -#: ../../help.pm_.c:541 +#: ../../help.pm_.c:544 msgid "" "By default, DrakX assumes you have a two-button mouse and will set it up\n" "for third-button emulation. DrakX will automatically know whether it is a\n" @@ -2471,30 +2468,30 @@ msgid "" "RETURN to \"Cancel\" and choose again." msgstr "" -#: ../../help.pm_.c:554 +#: ../../help.pm_.c:557 msgid "" "Please select the correct port. For example, the COM1 port under MS Windows\n" "is named ttyS0 under GNU/Linux." msgstr "" -#: ../../help.pm_.c:558 +#: ../../help.pm_.c:561 msgid "" "This is the most crucial decision point for the security of your GNU/Linux\n" -"system: you have to enter the root password. root is the system\n" +"system: you have to enter the \"root\" password. \"root\" is the system\n" "administrator and is the only one authorized to make updates, add users,\n" -"change the overall system configuration, and so on. In short, root can do\n" -"everything! That is why you must choose a password that is difficult to\n" +"change the overall system configuration, and so on. In short, \"root\" can\n" +"do everything! That is why you must choose a password that is difficult to\n" "guess - DrakX will tell you if it is too easy. As you can see, you can\n" "choose not to enter a password, but we strongly advise you against this if\n" "only for one reason: do not think that because you booted GNU/Linux that\n" -"your other operating systems are safe from mistakes. Since root can\n" +"your other operating systems are safe from mistakes. Since \"root\" can\n" "overcome all limitations and unintentionally erase all data on partitions\n" "by carelessly accessing the partitions themselves, it is important for it\n" -"to be difficult to become root.\n" +"to be difficult to become \"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" -"characters long. Never write down the root password - it makes it too easy\n" -"to compromise a system.\n" +"characters long. Never write down the \"root\" password - it makes it too\n" +"easy to compromise a system.\n" "\n" "However, please do not make the password too long or complicated because\n" "you must be able to remember it without too much effort.\n" @@ -2507,21 +2504,21 @@ msgid "" "In expert mode, you will be asked if you will be connecting to an\n" "authentication server, like NIS or LDAP.\n" "\n" -"If your network uses LDAP (or NIS) protocol for authentication, select LDAP\n" -"(or NIS) as authentication. If you do not know, ask your network\n" -"administrator.\n" +"If your network uses LDAP (or NIS) protocol for authentication, select\n" +"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n" +"network administrator.\n" "\n" "If your computer is not connected to any administrated network, you will\n" -"want to choose Local files for authentication." +"want to choose \"Local files\" for authentication." msgstr "" -#: ../../help.pm_.c:594 +#: ../../help.pm_.c:597 msgid "" -"Unless you know specifically otherwise, the usual choice is /dev/hda\n" -"(primary master IDE disk) or /dev/sda (first SCSI disk)." +"Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n" +"(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)." msgstr "" -#: ../../help.pm_.c:598 +#: ../../help.pm_.c:601 msgid "" "LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n" "either GNU/Linux or any other operating system present on your computer.\n" @@ -2534,29 +2531,29 @@ msgid "" "you will need a boot disk in order to boot those other operating systems!" msgstr "" -#: ../../help.pm_.c:609 +#: ../../help.pm_.c:612 msgid "" "You must indicate where you wish to place the information required to boot\n" "to GNU/Linux.\n" "\n" -"Unless you know exactly what you are doing, choose First sector of drive\n" -"(MBR)." +"Unless you know exactly what you are doing, choose \"First sector of drive\n" +"(MBR)\"." msgstr "" -#: ../../help.pm_.c:616 +#: ../../help.pm_.c:619 msgid "" "DrakX is now detecting any IDE devices present in your computer. It will\n" "also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n" "is found DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection will sometimes not detect a piece of hardware\n" -"DrakX will ask you to confirm if a PCI SCSI card is present. Click Yes if\n" -"you know that there is a SCSI card installed in your machine. You will be\n" -"presented a list of SCSI cards to choose from. Click No if you have no SCSI\n" -"hardware. If you are unsure you can check the list of hardware detected in\n" -"your machine by selecting \"See hardware info\" and clicking OK. Examine\n" -"the list of hardware and then click on the OK button to return to the SCSI\n" -"interface question.\n" +"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n" +"if you know that there is a SCSI card installed in your machine. You will\n" +"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n" +"no SCSI hardware. If you are unsure you can check the list of hardware\n" +"detected in your machine by selecting \"See hardware info\" and clicking\n" +"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n" +"return to the SCSI interface question.\n" "\n" "If you have to manually specify your adapter, DrakX will ask if you want to\n" "specify options for it. You should allow DrakX to probe the hardware for\n" @@ -2565,14 +2562,14 @@ msgid "" "\n" "If DrakX is not able to probe for the options that need to be passed, you\n" "will need to manually provide options to the driver. Please review the\n" -"`A<<`User Guide'' (chapter 3, section \"Collecting information on your\n" +"``User Guide'' (chapter 3, section \"Collecting information on your\n" "hardware\") for hints on retrieving the parameters required from hardware\n" "documentation, from the manufacturer's web site (if you have Internet\n" "access) or from Microsoft Windows (if you used this hardware with Windows\n" "on your system)." msgstr "" -#: ../../help.pm_.c:643 +#: ../../help.pm_.c:646 msgid "" "You can add additional entries for yaboot, either for other operating\n" "systems, alternate kernels, or for an emergency boot image.\n" @@ -2588,7 +2585,7 @@ msgid "" " * Image: this would be the name of the kernel to boot. Typically, vmlinux\n" "or a variation of vmlinux with an extension.\n" "\n" -" * Root: the root device or \"/\" for your Linux installation.\n" +" * Root: the \"root\" device or \"/\" for your Linux installation.\n" "\n" " * Append: on Apple hardware, the kernel append option is used quite often\n" "to assist in initializing video hardware, or to enable keyboard mouse\n" @@ -2607,7 +2604,7 @@ msgid "" " * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n" "need to allocate a large ramdisk, this option can be used.\n" "\n" -" * Read-write: normally the root partition is initially brought up in\n" +" * Read-write: normally the \"root\" partition is initially brought up in\n" "read-only, to allow a file system check before the system becomes \"live\".\n" "Here, you can override this option.\n" "\n" @@ -2621,7 +2618,7 @@ msgid "" "selections." msgstr "" -#: ../../help.pm_.c:688 +#: ../../help.pm_.c:691 msgid "" "Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n" "either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n" @@ -2658,7 +2655,7 @@ msgid "" "Firmware Delay expires." msgstr "" -#: ../../help.pm_.c:721 +#: ../../help.pm_.c:724 msgid "" "Here are presented various parameters concerning your machine. Depending on\n" "your installed hardware, you may - or not, see the following entries:\n" @@ -2673,10 +2670,10 @@ msgid "" "the\n" "language you have chosen. But here again, as for the choice of a keyboard,\n" "you may not be in the country for which the chosen language should\n" -"correspond. Hence, you may need to click on the Timezone button in order to\n" -"configure the clock according to the time zone you are in.\n" +"correspond. Hence, you may need to click on the \"Timezone\" button in\n" +"order to configure the clock according to the time zone you are in.\n" "\n" -" * \"Printer\": clicking on the No Printer button will open the printer\n" +" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n" "configuration wizard.\n" "\n" " * \"Sound card\": if a sound card is detected on your system, it is\n" @@ -2690,21 +2687,21 @@ msgid "" "associated to it." msgstr "" -#: ../../help.pm_.c:750 +#: ../../help.pm_.c:753 msgid "" "Choose the hard drive you want to erase to install your new Mandrake Linux\n" "partition. Be careful, all data present on it will be lost and will not be\n" "recoverable!" msgstr "" -#: ../../help.pm_.c:755 +#: ../../help.pm_.c:758 msgid "" -"Click on OK if you want to delete all data and partitions present on this\n" -"hard drive. Be careful, after clicking on OK, you will not be able to\n" -"recover any data and partitions present on this hard drive, including any\n" -"Windows data.\n" +"Click on \"OK\" if you want to delete all data and partitions present on\n" +"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n" +"to recover any data and partitions present on this hard drive, including\n" +"any Windows data.\n" "\n" -"Click on Cancel to cancel this operation without losing any data and\n" +"Click on \"Cancel\" to cancel this operation without losing any data and\n" "partitions present on this hard drive." msgstr "" @@ -2727,22 +2724,22 @@ msgstr "" msgid "Can't use broadcast with no NIS domain" msgstr "" -#: ../../install_any.pm_.c:794 +#: ../../install_any.pm_.c:792 #, c-format msgid "Insert a FAT formatted floppy in drive %s" msgstr "" -#: ../../install_any.pm_.c:798 +#: ../../install_any.pm_.c:796 msgid "This floppy is not FAT formatted" msgstr "" -#: ../../install_any.pm_.c:810 +#: ../../install_any.pm_.c:808 msgid "" "To use this saved packages selection, boot installation with ``linux " "defcfg=floppy''" msgstr "" -#: ../../install_any.pm_.c:832 ../../partition_table.pm_.c:723 +#: ../../install_any.pm_.c:830 ../../partition_table.pm_.c:723 #, c-format msgid "Error reading file %s" msgstr "" @@ -2752,22 +2749,10 @@ msgstr "" #: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308 #: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170 #: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:414 -#: ../../my_gtk.pm_.c:675 ../../my_gtk.pm_.c:697 +#: ../../my_gtk.pm_.c:679 ../../my_gtk.pm_.c:701 msgid "Ok" msgstr "" -#: ../../install_gtk.pm_.c:473 -msgid "Please test the mouse" -msgstr "" - -#: ../../install_gtk.pm_.c:474 -msgid "To activate the mouse," -msgstr "" - -#: ../../install_gtk.pm_.c:475 -msgid "MOVE YOUR WHEEL!" -msgstr "" - #: ../../install_interactive.pm_.c:23 #, c-format msgid "" @@ -2997,7 +2982,7 @@ msgid "Size: %d KB\n" msgstr "" #: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:470 -#: ../../install_steps_interactive.pm_.c:509 +#: ../../install_steps_interactive.pm_.c:508 msgid "Choose the packages you want to install" msgstr "" @@ -3011,7 +2996,7 @@ msgid "Install" msgstr "" #: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:486 -#: ../../install_steps_interactive.pm_.c:695 +#: ../../install_steps_interactive.pm_.c:694 msgid "Installing" msgstr "" @@ -3028,7 +3013,7 @@ msgid "Total time " msgstr "" #: ../../install_steps_graphical.pm_.c:507 -#: ../../install_steps_interactive.pm_.c:695 +#: ../../install_steps_interactive.pm_.c:694 msgid "Preparing installation" msgstr "" @@ -3097,15 +3082,15 @@ msgstr "" msgid "Percentage of packages to install" msgstr "" -#: ../../install_steps_gtk.pm_.c:290 ../../install_steps_interactive.pm_.c:619 +#: ../../install_steps_gtk.pm_.c:290 ../../install_steps_interactive.pm_.c:618 msgid "Package Group Selection" msgstr "" -#: ../../install_steps_gtk.pm_.c:310 ../../install_steps_interactive.pm_.c:634 +#: ../../install_steps_gtk.pm_.c:310 ../../install_steps_interactive.pm_.c:633 msgid "Individual package selection" msgstr "" -#: ../../install_steps_gtk.pm_.c:333 ../../install_steps_interactive.pm_.c:598 +#: ../../install_steps_gtk.pm_.c:333 ../../install_steps_interactive.pm_.c:597 #, c-format msgid "Total size: %d / %d MB" msgstr "" @@ -3372,7 +3357,7 @@ msgid "" msgstr "" #: ../../install_steps_interactive.pm_.c:168 -#: ../../install_steps_interactive.pm_.c:867 +#: ../../install_steps_interactive.pm_.c:866 #: ../../standalone/keyboarddrake_.c:28 msgid "Keyboard" msgstr "" @@ -3439,35 +3424,35 @@ msgstr "" msgid "Button 3 Emulation" msgstr "" -#: ../../install_steps_interactive.pm_.c:261 +#: ../../install_steps_interactive.pm_.c:260 msgid "Configuring PCMCIA cards..." msgstr "" -#: ../../install_steps_interactive.pm_.c:261 +#: ../../install_steps_interactive.pm_.c:260 msgid "PCMCIA" msgstr "" -#: ../../install_steps_interactive.pm_.c:266 +#: ../../install_steps_interactive.pm_.c:265 msgid "Configuring IDE" msgstr "" -#: ../../install_steps_interactive.pm_.c:266 +#: ../../install_steps_interactive.pm_.c:265 msgid "IDE" msgstr "" -#: ../../install_steps_interactive.pm_.c:281 +#: ../../install_steps_interactive.pm_.c:280 msgid "no available partitions" msgstr "" -#: ../../install_steps_interactive.pm_.c:284 +#: ../../install_steps_interactive.pm_.c:283 msgid "Scanning partitions to find mount points" msgstr "" -#: ../../install_steps_interactive.pm_.c:292 +#: ../../install_steps_interactive.pm_.c:291 msgid "Choose the mount points" msgstr "" -#: ../../install_steps_interactive.pm_.c:311 +#: ../../install_steps_interactive.pm_.c:310 #, c-format msgid "" "I can't read your partition table, it's too corrupted for me :(\n" @@ -3478,152 +3463,152 @@ msgid "" "Do you agree to loose all the partitions?\n" msgstr "" -#: ../../install_steps_interactive.pm_.c:324 +#: ../../install_steps_interactive.pm_.c:323 msgid "" "DiskDrake failed to read correctly the partition table.\n" "Continue at your own risk!" msgstr "" -#: ../../install_steps_interactive.pm_.c:340 +#: ../../install_steps_interactive.pm_.c:339 msgid "" "No free space for 1MB bootstrap! Install will continue, but to boot your " "system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" -#: ../../install_steps_interactive.pm_.c:349 +#: ../../install_steps_interactive.pm_.c:348 msgid "No root partition found to perform an upgrade" msgstr "" -#: ../../install_steps_interactive.pm_.c:350 +#: ../../install_steps_interactive.pm_.c:349 msgid "Root Partition" msgstr "" -#: ../../install_steps_interactive.pm_.c:351 +#: ../../install_steps_interactive.pm_.c:350 msgid "What is the root partition (/) of your system?" msgstr "" -#: ../../install_steps_interactive.pm_.c:365 +#: ../../install_steps_interactive.pm_.c:364 msgid "You need to reboot for the partition table modifications to take place" msgstr "" -#: ../../install_steps_interactive.pm_.c:389 +#: ../../install_steps_interactive.pm_.c:388 msgid "Choose the partitions you want to format" msgstr "" -#: ../../install_steps_interactive.pm_.c:390 +#: ../../install_steps_interactive.pm_.c:389 msgid "Check bad blocks?" msgstr "" -#: ../../install_steps_interactive.pm_.c:416 +#: ../../install_steps_interactive.pm_.c:415 msgid "Formatting partitions" msgstr "" -#: ../../install_steps_interactive.pm_.c:418 +#: ../../install_steps_interactive.pm_.c:417 #, c-format msgid "Creating and formatting file %s" msgstr "" -#: ../../install_steps_interactive.pm_.c:421 +#: ../../install_steps_interactive.pm_.c:420 msgid "Not enough swap to fulfill installation, please add some" msgstr "" -#: ../../install_steps_interactive.pm_.c:427 +#: ../../install_steps_interactive.pm_.c:426 msgid "Looking for available packages" msgstr "" -#: ../../install_steps_interactive.pm_.c:433 +#: ../../install_steps_interactive.pm_.c:432 msgid "Finding packages to upgrade" msgstr "" -#: ../../install_steps_interactive.pm_.c:450 +#: ../../install_steps_interactive.pm_.c:449 #, c-format msgid "" "Your system has not enough space left for installation or upgrade (%d > %d)" msgstr "" -#: ../../install_steps_interactive.pm_.c:469 +#: ../../install_steps_interactive.pm_.c:468 #, c-format msgid "Complete (%dMB)" msgstr "" -#: ../../install_steps_interactive.pm_.c:469 +#: ../../install_steps_interactive.pm_.c:468 #, c-format msgid "Minimum (%dMB)" msgstr "" -#: ../../install_steps_interactive.pm_.c:469 +#: ../../install_steps_interactive.pm_.c:468 #, c-format msgid "Recommended (%dMB)" msgstr "" -#: ../../install_steps_interactive.pm_.c:475 +#: ../../install_steps_interactive.pm_.c:474 msgid "Custom" msgstr "" -#: ../../install_steps_interactive.pm_.c:522 +#: ../../install_steps_interactive.pm_.c:521 msgid "" "Please choose load or save package selection on floppy.\n" "The format is the same as auto_install generated floppies." msgstr "" -#: ../../install_steps_interactive.pm_.c:525 +#: ../../install_steps_interactive.pm_.c:524 msgid "Load from floppy" msgstr "" -#: ../../install_steps_interactive.pm_.c:527 +#: ../../install_steps_interactive.pm_.c:526 msgid "Loading from floppy" msgstr "" -#: ../../install_steps_interactive.pm_.c:527 +#: ../../install_steps_interactive.pm_.c:526 msgid "Package selection" msgstr "" -#: ../../install_steps_interactive.pm_.c:532 +#: ../../install_steps_interactive.pm_.c:531 msgid "Insert a floppy containing package selection" msgstr "" -#: ../../install_steps_interactive.pm_.c:544 +#: ../../install_steps_interactive.pm_.c:543 msgid "Save on floppy" msgstr "" -#: ../../install_steps_interactive.pm_.c:605 +#: ../../install_steps_interactive.pm_.c:604 msgid "Selected size is larger than available space" msgstr "" -#: ../../install_steps_interactive.pm_.c:670 +#: ../../install_steps_interactive.pm_.c:669 msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" -#: ../../install_steps_interactive.pm_.c:675 +#: ../../install_steps_interactive.pm_.c:674 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "" -#: ../../install_steps_interactive.pm_.c:704 +#: ../../install_steps_interactive.pm_.c:703 #, c-format msgid "" "Installing package %s\n" "%d%%" msgstr "" -#: ../../install_steps_interactive.pm_.c:713 +#: ../../install_steps_interactive.pm_.c:712 msgid "Post-install configuration" msgstr "" -#: ../../install_steps_interactive.pm_.c:719 +#: ../../install_steps_interactive.pm_.c:718 #, c-format msgid "Please insert the Boot floppy used in drive %s" msgstr "" -#: ../../install_steps_interactive.pm_.c:725 +#: ../../install_steps_interactive.pm_.c:724 #, c-format msgid "Please insert the Update Modules floppy in drive %s" msgstr "" -#: ../../install_steps_interactive.pm_.c:750 +#: ../../install_steps_interactive.pm_.c:749 msgid "" "You have now the possibility to download software aimed for encryption.\n" "\n" @@ -3662,132 +3647,132 @@ msgid "" "USA" msgstr "" -#: ../../install_steps_interactive.pm_.c:782 +#: ../../install_steps_interactive.pm_.c:781 msgid "Choose a mirror from which to get the packages" msgstr "" -#: ../../install_steps_interactive.pm_.c:793 +#: ../../install_steps_interactive.pm_.c:792 msgid "Contacting the mirror to get the list of available packages" msgstr "" -#: ../../install_steps_interactive.pm_.c:796 +#: ../../install_steps_interactive.pm_.c:795 msgid "Please choose the packages you want to install." msgstr "" -#: ../../install_steps_interactive.pm_.c:808 +#: ../../install_steps_interactive.pm_.c:807 msgid "Which is your timezone?" msgstr "" -#: ../../install_steps_interactive.pm_.c:813 +#: ../../install_steps_interactive.pm_.c:812 msgid "Hardware clock set to GMT" msgstr "" -#: ../../install_steps_interactive.pm_.c:814 +#: ../../install_steps_interactive.pm_.c:813 msgid "Automatic time synchronization (using NTP)" msgstr "" -#: ../../install_steps_interactive.pm_.c:821 +#: ../../install_steps_interactive.pm_.c:820 msgid "NTP Server" msgstr "" -#: ../../install_steps_interactive.pm_.c:855 ../../printerdrake.pm_.c:93 +#: ../../install_steps_interactive.pm_.c:854 ../../printerdrake.pm_.c:93 msgid "Remote CUPS server" msgstr "" -#: ../../install_steps_interactive.pm_.c:856 +#: ../../install_steps_interactive.pm_.c:855 msgid "No printer" msgstr "" -#: ../../install_steps_interactive.pm_.c:863 ../../steps.pm_.c:27 +#: ../../install_steps_interactive.pm_.c:862 ../../steps.pm_.c:27 msgid "Summary" msgstr "" -#: ../../install_steps_interactive.pm_.c:866 +#: ../../install_steps_interactive.pm_.c:865 msgid "Mouse" msgstr "" -#: ../../install_steps_interactive.pm_.c:868 +#: ../../install_steps_interactive.pm_.c:867 msgid "Timezone" msgstr "" -#: ../../install_steps_interactive.pm_.c:869 ../../printerdrake.pm_.c:1276 +#: ../../install_steps_interactive.pm_.c:868 ../../printerdrake.pm_.c:1276 #: ../../printerdrake.pm_.c:1344 msgid "Printer" msgstr "" -#: ../../install_steps_interactive.pm_.c:871 +#: ../../install_steps_interactive.pm_.c:870 msgid "ISDN card" msgstr "" -#: ../../install_steps_interactive.pm_.c:874 +#: ../../install_steps_interactive.pm_.c:873 msgid "Sound card" msgstr "" -#: ../../install_steps_interactive.pm_.c:877 +#: ../../install_steps_interactive.pm_.c:876 msgid "TV card" msgstr "" -#: ../../install_steps_interactive.pm_.c:913 -#: ../../install_steps_interactive.pm_.c:937 -#: ../../install_steps_interactive.pm_.c:941 +#: ../../install_steps_interactive.pm_.c:912 +#: ../../install_steps_interactive.pm_.c:936 +#: ../../install_steps_interactive.pm_.c:940 msgid "LDAP" msgstr "" -#: ../../install_steps_interactive.pm_.c:914 -#: ../../install_steps_interactive.pm_.c:937 -#: ../../install_steps_interactive.pm_.c:950 +#: ../../install_steps_interactive.pm_.c:913 +#: ../../install_steps_interactive.pm_.c:936 +#: ../../install_steps_interactive.pm_.c:949 msgid "NIS" msgstr "" -#: ../../install_steps_interactive.pm_.c:915 -#: ../../install_steps_interactive.pm_.c:937 +#: ../../install_steps_interactive.pm_.c:914 +#: ../../install_steps_interactive.pm_.c:936 msgid "Local files" msgstr "" -#: ../../install_steps_interactive.pm_.c:924 -#: ../../install_steps_interactive.pm_.c:925 ../../steps.pm_.c:24 +#: ../../install_steps_interactive.pm_.c:923 +#: ../../install_steps_interactive.pm_.c:924 ../../steps.pm_.c:24 msgid "Set root password" msgstr "" -#: ../../install_steps_interactive.pm_.c:926 +#: ../../install_steps_interactive.pm_.c:925 msgid "No password" msgstr "" -#: ../../install_steps_interactive.pm_.c:931 +#: ../../install_steps_interactive.pm_.c:930 #, c-format msgid "This password is too simple (must be at least %d characters long)" msgstr "" -#: ../../install_steps_interactive.pm_.c:937 ../../network/modem.pm_.c:47 -#: ../../standalone/draknet_.c:596 +#: ../../install_steps_interactive.pm_.c:936 ../../network/modem.pm_.c:47 +#: ../../standalone/draknet_.c:597 msgid "Authentication" msgstr "" -#: ../../install_steps_interactive.pm_.c:945 +#: ../../install_steps_interactive.pm_.c:944 msgid "Authentication LDAP" msgstr "" -#: ../../install_steps_interactive.pm_.c:946 +#: ../../install_steps_interactive.pm_.c:945 msgid "LDAP Base dn" msgstr "" -#: ../../install_steps_interactive.pm_.c:947 +#: ../../install_steps_interactive.pm_.c:946 msgid "LDAP Server" msgstr "" -#: ../../install_steps_interactive.pm_.c:953 +#: ../../install_steps_interactive.pm_.c:952 msgid "Authentication NIS" msgstr "" -#: ../../install_steps_interactive.pm_.c:954 +#: ../../install_steps_interactive.pm_.c:953 msgid "NIS Domain" msgstr "" -#: ../../install_steps_interactive.pm_.c:955 +#: ../../install_steps_interactive.pm_.c:954 msgid "NIS Server" msgstr "" -#: ../../install_steps_interactive.pm_.c:990 +#: ../../install_steps_interactive.pm_.c:989 msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " @@ -3805,19 +3790,19 @@ msgid "" "drive and press \"Ok\"." msgstr "" -#: ../../install_steps_interactive.pm_.c:1006 +#: ../../install_steps_interactive.pm_.c:1005 msgid "First floppy drive" msgstr "" -#: ../../install_steps_interactive.pm_.c:1007 +#: ../../install_steps_interactive.pm_.c:1006 msgid "Second floppy drive" msgstr "" -#: ../../install_steps_interactive.pm_.c:1008 ../../printerdrake.pm_.c:1118 +#: ../../install_steps_interactive.pm_.c:1007 ../../printerdrake.pm_.c:1118 msgid "Skip" msgstr "" -#: ../../install_steps_interactive.pm_.c:1013 +#: ../../install_steps_interactive.pm_.c:1012 msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " @@ -3831,28 +3816,28 @@ msgid "" "failures. Would you like to create a bootdisk for your system?" msgstr "" -#: ../../install_steps_interactive.pm_.c:1022 +#: ../../install_steps_interactive.pm_.c:1021 msgid "Sorry, no floppy drive available" msgstr "" -#: ../../install_steps_interactive.pm_.c:1026 +#: ../../install_steps_interactive.pm_.c:1025 msgid "Choose the floppy drive you want to use to make the bootdisk" msgstr "" -#: ../../install_steps_interactive.pm_.c:1030 +#: ../../install_steps_interactive.pm_.c:1029 #, c-format msgid "Insert a floppy in drive %s" msgstr "" -#: ../../install_steps_interactive.pm_.c:1033 +#: ../../install_steps_interactive.pm_.c:1032 msgid "Creating bootdisk" msgstr "" -#: ../../install_steps_interactive.pm_.c:1040 +#: ../../install_steps_interactive.pm_.c:1039 msgid "Preparing bootloader" msgstr "" -#: ../../install_steps_interactive.pm_.c:1051 +#: ../../install_steps_interactive.pm_.c:1050 msgid "" "You appear to have an OldWorld or Unknown\n" " machine, the yaboot bootloader will not work for you.\n" @@ -3860,25 +3845,25 @@ msgid "" " need to use BootX to boot your machine" msgstr "" -#: ../../install_steps_interactive.pm_.c:1056 +#: ../../install_steps_interactive.pm_.c:1055 msgid "Do you want to use aboot?" msgstr "" -#: ../../install_steps_interactive.pm_.c:1059 +#: ../../install_steps_interactive.pm_.c:1058 msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" -#: ../../install_steps_interactive.pm_.c:1066 +#: ../../install_steps_interactive.pm_.c:1065 msgid "Installing bootloader" msgstr "" -#: ../../install_steps_interactive.pm_.c:1071 +#: ../../install_steps_interactive.pm_.c:1070 msgid "Installation of bootloader failed. The following error occured:" msgstr "" -#: ../../install_steps_interactive.pm_.c:1079 +#: ../../install_steps_interactive.pm_.c:1078 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" @@ -3889,41 +3874,41 @@ msgid "" "At your next boot you should see the bootloader prompt." msgstr "" -#: ../../install_steps_interactive.pm_.c:1087 ../../standalone/draksec_.c:23 +#: ../../install_steps_interactive.pm_.c:1086 ../../standalone/draksec_.c:23 msgid "Low" msgstr "" -#: ../../install_steps_interactive.pm_.c:1088 ../../standalone/draksec_.c:24 +#: ../../install_steps_interactive.pm_.c:1087 ../../standalone/draksec_.c:24 msgid "Medium" msgstr "" -#: ../../install_steps_interactive.pm_.c:1089 ../../standalone/draksec_.c:25 +#: ../../install_steps_interactive.pm_.c:1088 ../../standalone/draksec_.c:25 msgid "High" msgstr "" -#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:62 +#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:62 msgid "Choose security level" msgstr "" -#: ../../install_steps_interactive.pm_.c:1129 +#: ../../install_steps_interactive.pm_.c:1128 #: ../../standalone/drakautoinst_.c:80 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "" -#: ../../install_steps_interactive.pm_.c:1133 +#: ../../install_steps_interactive.pm_.c:1132 #: ../../standalone/drakautoinst_.c:82 msgid "Creating auto install floppy" msgstr "" -#: ../../install_steps_interactive.pm_.c:1144 +#: ../../install_steps_interactive.pm_.c:1143 msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" -#: ../../install_steps_interactive.pm_.c:1155 +#: ../../install_steps_interactive.pm_.c:1154 msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" @@ -3936,11 +3921,11 @@ msgid "" "install chapter of the Official Mandrake Linux User's Guide." msgstr "" -#: ../../install_steps_interactive.pm_.c:1167 +#: ../../install_steps_interactive.pm_.c:1166 msgid "Generate auto install floppy" msgstr "" -#: ../../install_steps_interactive.pm_.c:1169 +#: ../../install_steps_interactive.pm_.c:1168 msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" @@ -3949,15 +3934,15 @@ msgid "" "You may prefer to replay the installation.\n" msgstr "" -#: ../../install_steps_interactive.pm_.c:1174 +#: ../../install_steps_interactive.pm_.c:1173 msgid "Automated" msgstr "" -#: ../../install_steps_interactive.pm_.c:1174 +#: ../../install_steps_interactive.pm_.c:1173 msgid "Replay" msgstr "" -#: ../../install_steps_interactive.pm_.c:1177 +#: ../../install_steps_interactive.pm_.c:1176 msgid "Save packages selection" msgstr "" @@ -4413,6 +4398,18 @@ msgstr "" msgid "No mouse" msgstr "" +#: ../../mouse.pm_.c:474 +msgid "Please test the mouse" +msgstr "" + +#: ../../mouse.pm_.c:475 +msgid "To activate the mouse," +msgstr "" + +#: ../../mouse.pm_.c:476 +msgid "MOVE YOUR WHEEL!" +msgstr "" + #: ../../my_gtk.pm_.c:379 msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" msgstr "" @@ -4429,43 +4426,43 @@ msgstr "" msgid "<- Previous" msgstr "" -#: ../../my_gtk.pm_.c:675 +#: ../../my_gtk.pm_.c:679 msgid "Is this correct?" msgstr "" -#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36 +#: ../../network/adsl.pm_.c:20 ../../network/ethernet.pm_.c:36 msgid "Connect to the Internet" msgstr "" -#: ../../network/adsl.pm_.c:20 +#: ../../network/adsl.pm_.c:21 msgid "" "The most common way to connect with adsl is pppoe.\n" "Some connections use pptp, a few ones use dhcp.\n" "If you don't know, choose 'use pppoe'" msgstr "" -#: ../../network/adsl.pm_.c:22 +#: ../../network/adsl.pm_.c:23 msgid "speedtouch usb" msgstr "" -#: ../../network/adsl.pm_.c:22 +#: ../../network/adsl.pm_.c:23 msgid "use dhcp" msgstr "" -#: ../../network/adsl.pm_.c:22 +#: ../../network/adsl.pm_.c:23 msgid "use pppoe" msgstr "" -#: ../../network/adsl.pm_.c:22 +#: ../../network/adsl.pm_.c:23 msgid "use pptp" msgstr "" -#: ../../network/adsl.pm_.c:31 ../../network/ethernet.pm_.c:109 +#: ../../network/adsl.pm_.c:32 ../../network/ethernet.pm_.c:109 #: ../../network/ethernet.pm_.c:175 ../../standalone/drakgw_.c:223 msgid "Network interface" msgstr "" -#: ../../network/adsl.pm_.c:32 ../../network/ethernet.pm_.c:176 +#: ../../network/adsl.pm_.c:33 ../../network/ethernet.pm_.c:176 #, c-format msgid "I'm about to restart the network device %s. Do you agree?" msgstr "" @@ -4671,43 +4668,43 @@ msgstr "" msgid "Dialup options" msgstr "" -#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:592 +#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:593 msgid "Connection name" msgstr "" -#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:593 +#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:594 msgid "Phone number" msgstr "" -#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:594 +#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:595 msgid "Login ID" msgstr "" -#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:596 +#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:597 msgid "CHAP" msgstr "" -#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:596 +#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:597 msgid "PAP" msgstr "" -#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:596 +#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:597 msgid "Script-based" msgstr "" -#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:596 +#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:597 msgid "Terminal-based" msgstr "" -#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:597 +#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:598 msgid "Domain name" msgstr "" -#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:598 +#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:599 msgid "First DNS Server (optional)" msgstr "" -#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:599 +#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:600 msgid "Second DNS Server (optional)" msgstr "" @@ -4898,12 +4895,12 @@ msgstr "" msgid " (driver %s)" msgstr "" -#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:250 -#: ../../standalone/draknet_.c:453 +#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:251 +#: ../../standalone/draknet_.c:454 msgid "IP address" msgstr "" -#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:454 +#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:455 msgid "Netmask" msgstr "" @@ -4931,7 +4928,7 @@ msgstr "" msgid "DNS server" msgstr "" -#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:591 +#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:592 msgid "Gateway" msgstr "" @@ -4975,7 +4972,7 @@ msgstr "" msgid "Testing your connection..." msgstr "" -#: ../../network/tools.pm_.c:45 ../../standalone/draknet_.c:215 +#: ../../network/tools.pm_.c:45 ../../standalone/draknet_.c:216 msgid "The system is now connected to Internet." msgstr "" @@ -4983,7 +4980,7 @@ msgstr "" msgid "For Security reason, it will be disconnected now." msgstr "" -#: ../../network/tools.pm_.c:47 ../../standalone/draknet_.c:215 +#: ../../network/tools.pm_.c:47 ../../standalone/draknet_.c:216 msgid "" "The system doesn't seem to be connected to internet.\n" "Try to reconfigure your connection." @@ -4997,43 +4994,43 @@ msgstr "" msgid "Please fill or check the field below" msgstr "" -#: ../../network/tools.pm_.c:74 ../../standalone/draknet_.c:578 +#: ../../network/tools.pm_.c:74 ../../standalone/draknet_.c:579 msgid "Card IRQ" msgstr "" -#: ../../network/tools.pm_.c:75 ../../standalone/draknet_.c:579 +#: ../../network/tools.pm_.c:75 ../../standalone/draknet_.c:580 msgid "Card mem (DMA)" msgstr "" -#: ../../network/tools.pm_.c:76 ../../standalone/draknet_.c:580 +#: ../../network/tools.pm_.c:76 ../../standalone/draknet_.c:581 msgid "Card IO" msgstr "" -#: ../../network/tools.pm_.c:77 ../../standalone/draknet_.c:581 +#: ../../network/tools.pm_.c:77 ../../standalone/draknet_.c:582 msgid "Card IO_0" msgstr "" -#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:582 +#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:583 msgid "Card IO_1" msgstr "" -#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:583 +#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:584 msgid "Your personal phone number" msgstr "" -#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:584 +#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:585 msgid "Provider name (ex provider.net)" msgstr "" -#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:585 +#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:586 msgid "Provider phone number" msgstr "" -#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:586 +#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:587 msgid "Provider dns 1 (optional)" msgstr "" -#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:587 +#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:588 msgid "Provider dns 2 (optional)" msgstr "" @@ -5041,11 +5038,11 @@ msgstr "" msgid "Choose your country" msgstr "" -#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:590 +#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:591 msgid "Dialing mode" msgstr "" -#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:602 +#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:603 msgid "Connection speed" msgstr "" @@ -5053,11 +5050,11 @@ msgstr "" msgid "Connection timeout (in sec)" msgstr "" -#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:588 +#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:589 msgid "Account Login (user name)" msgstr "" -#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:589 +#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:590 msgid "Account Password" msgstr "" @@ -5181,17 +5178,17 @@ msgstr "" msgid "Pipe job into a command" msgstr "" -#: ../../printer.pm_.c:213 ../../printer.pm_.c:625 +#: ../../printer.pm_.c:226 ../../printer.pm_.c:636 #: ../../printerdrake.pm_.c:1504 msgid "Unknown model" msgstr "" -#: ../../printer.pm_.c:479 +#: ../../printer.pm_.c:490 #, c-format msgid "(on %s)" msgstr "" -#: ../../printer.pm_.c:481 +#: ../../printer.pm_.c:492 msgid "(on this machine)" msgstr "" @@ -6324,82 +6321,82 @@ msgid "" "Click on Configure to launch the setup wizard." msgstr "" -#: ../../standalone/draknet_.c:78 +#: ../../standalone/draknet_.c:79 #, c-format msgid "Network configuration (%d adapters)" msgstr "" -#: ../../standalone/draknet_.c:85 ../../standalone/draknet_.c:565 +#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:566 msgid "Profile: " msgstr "" -#: ../../standalone/draknet_.c:93 +#: ../../standalone/draknet_.c:94 msgid "Del profile..." msgstr "" -#: ../../standalone/draknet_.c:99 +#: ../../standalone/draknet_.c:100 msgid "Profile to delete:" msgstr "" -#: ../../standalone/draknet_.c:127 +#: ../../standalone/draknet_.c:128 msgid "New profile..." msgstr "" -#: ../../standalone/draknet_.c:133 +#: ../../standalone/draknet_.c:134 msgid "" "Name of the profile to create (the new profile is created as a copy of the " "current one) :" msgstr "" -#: ../../standalone/draknet_.c:159 +#: ../../standalone/draknet_.c:160 msgid "Hostname: " msgstr "" -#: ../../standalone/draknet_.c:166 +#: ../../standalone/draknet_.c:167 msgid "Internet access" msgstr "" -#: ../../standalone/draknet_.c:179 +#: ../../standalone/draknet_.c:180 msgid "Type:" msgstr "" -#: ../../standalone/draknet_.c:182 ../../standalone/draknet_.c:392 +#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:393 msgid "Gateway:" msgstr "" -#: ../../standalone/draknet_.c:182 ../../standalone/draknet_.c:392 +#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:393 msgid "Interface:" msgstr "" -#: ../../standalone/draknet_.c:187 +#: ../../standalone/draknet_.c:188 msgid "Status:" msgstr "" -#: ../../standalone/draknet_.c:189 ../../standalone/draknet_.c:395 +#: ../../standalone/draknet_.c:190 ../../standalone/draknet_.c:396 msgid "Connected" msgstr "" -#: ../../standalone/draknet_.c:189 ../../standalone/draknet_.c:395 +#: ../../standalone/draknet_.c:190 ../../standalone/draknet_.c:396 msgid "Not connected" msgstr "" -#: ../../standalone/draknet_.c:192 ../../standalone/draknet_.c:396 +#: ../../standalone/draknet_.c:193 ../../standalone/draknet_.c:397 msgid "Connect..." msgstr "" -#: ../../standalone/draknet_.c:192 ../../standalone/draknet_.c:396 +#: ../../standalone/draknet_.c:193 ../../standalone/draknet_.c:397 msgid "Disconnect..." msgstr "" -#: ../../standalone/draknet_.c:210 +#: ../../standalone/draknet_.c:211 msgid "Starting your connection..." msgstr "" -#: ../../standalone/draknet_.c:218 +#: ../../standalone/draknet_.c:219 msgid "Closing your connection..." msgstr "" -#: ../../standalone/draknet_.c:223 +#: ../../standalone/draknet_.c:224 msgid "" "The connection is not closed.\n" "Try to do it manually by running\n" @@ -6407,116 +6404,116 @@ msgid "" "in root." msgstr "" -#: ../../standalone/draknet_.c:226 +#: ../../standalone/draknet_.c:227 msgid "The system is now disconnected." msgstr "" -#: ../../standalone/draknet_.c:238 +#: ../../standalone/draknet_.c:239 msgid "Configure Internet Access..." msgstr "" -#: ../../standalone/draknet_.c:245 ../../standalone/draknet_.c:438 +#: ../../standalone/draknet_.c:246 ../../standalone/draknet_.c:439 msgid "LAN configuration" msgstr "" -#: ../../standalone/draknet_.c:250 +#: ../../standalone/draknet_.c:251 msgid "Driver" msgstr "" -#: ../../standalone/draknet_.c:250 +#: ../../standalone/draknet_.c:251 msgid "Interface" msgstr "" -#: ../../standalone/draknet_.c:250 +#: ../../standalone/draknet_.c:251 msgid "Protocol" msgstr "" -#: ../../standalone/draknet_.c:250 +#: ../../standalone/draknet_.c:251 msgid "State" msgstr "" -#: ../../standalone/draknet_.c:262 +#: ../../standalone/draknet_.c:263 msgid "Configure Local Area Network..." msgstr "" -#: ../../standalone/draknet_.c:296 +#: ../../standalone/draknet_.c:297 msgid "Normal Mode" msgstr "" -#: ../../standalone/draknet_.c:301 +#: ../../standalone/draknet_.c:302 msgid "Apply" msgstr "" -#: ../../standalone/draknet_.c:320 +#: ../../standalone/draknet_.c:321 msgid "Please Wait... Applying the configuration" msgstr "" -#: ../../standalone/draknet_.c:420 +#: ../../standalone/draknet_.c:421 msgid "" "You don't have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" -#: ../../standalone/draknet_.c:442 +#: ../../standalone/draknet_.c:443 msgid "LAN Configuration" msgstr "" -#: ../../standalone/draknet_.c:449 +#: ../../standalone/draknet_.c:450 #, c-format msgid "Adapter %s: %s" msgstr "" -#: ../../standalone/draknet_.c:455 +#: ../../standalone/draknet_.c:456 msgid "Boot Protocol" msgstr "" -#: ../../standalone/draknet_.c:456 +#: ../../standalone/draknet_.c:457 msgid "Started on boot" msgstr "" -#: ../../standalone/draknet_.c:457 +#: ../../standalone/draknet_.c:458 msgid "DHCP client" msgstr "" -#: ../../standalone/draknet_.c:481 ../../standalone/draknet_.c:483 +#: ../../standalone/draknet_.c:482 ../../standalone/draknet_.c:484 msgid "activate now" msgstr "" -#: ../../standalone/draknet_.c:481 ../../standalone/draknet_.c:483 +#: ../../standalone/draknet_.c:482 ../../standalone/draknet_.c:484 msgid "desactivate now" msgstr "" -#: ../../standalone/draknet_.c:530 +#: ../../standalone/draknet_.c:531 msgid "" "You don't have any internet connection.\n" "Create one first by clicking on 'Configure'" msgstr "" -#: ../../standalone/draknet_.c:554 +#: ../../standalone/draknet_.c:555 msgid "Internet connection configuration" msgstr "" -#: ../../standalone/draknet_.c:558 +#: ../../standalone/draknet_.c:559 msgid "Internet Connection Configuration" msgstr "" -#: ../../standalone/draknet_.c:567 +#: ../../standalone/draknet_.c:568 msgid "Connection type: " msgstr "" -#: ../../standalone/draknet_.c:573 +#: ../../standalone/draknet_.c:574 msgid "Parameters" msgstr "" -#: ../../standalone/draknet_.c:600 +#: ../../standalone/draknet_.c:601 msgid "Ethernet Card" msgstr "" -#: ../../standalone/draknet_.c:601 +#: ../../standalone/draknet_.c:602 msgid "DHCP Client" msgstr "" -#: ../../standalone/draknet_.c:603 +#: ../../standalone/draknet_.c:604 msgid "Connection timeout (in sec) [ beta, not yet implemented ]" msgstr "" -- cgit v1.2.1