package mouse; # $Id$ #use diagnostics; #use strict; #-###################################################################################### #- misc imports #-###################################################################################### use common; use modules; use detect_devices; use run_program; use devices; use modules; use any; use log; my @mouses_fields = qw(nbuttons MOUSETYPE Protocol name EmulateWheel); sub all_mice() { arch() =~ /^sparc/ ? ( 'sunmouse' => [ [ 'sunmouse' ], [ [ 3, 'sun', 'sun', N_("Sun - Mouse") ] ] ] ) : ( 'PS/2' => [ [ 'psaux' ], [ [ 2, 'ps/2', 'PS/2', N_("Standard") ], [ 5, 'ps/2', 'MouseManPlusPS/2', N_("Logitech MouseMan+") ], [ 5, 'imps2', 'IMPS/2', N_("Generic PS2 Wheel Mouse") ], [ 5, 'ps/2', 'GlidePointPS/2', N_("GlidePoint") ], [ 5, 'imps2', 'auto', N_("Automatic") ], '', [ 5, 'ps/2', 'ThinkingMousePS/2', N_("Kensington Thinking Mouse") ], [ 5, 'netmouse', 'NetMousePS/2', N_("Genius NetMouse") ], [ 5, 'netmouse', 'NetScrollPS/2', N_("Genius NetScroll") ], [ 7, 'ps/2', 'ExplorerPS/2', N_("Microsoft Explorer") ], ] ], 'USB' => [ [ 'input/mice' ], [ [ 1, 'ps/2', 'ExplorerPS/2', N_("1 button") ], [ 2, 'ps/2', 'ExplorerPS/2', N_("Generic 2 Button Mouse") ], [ 3, 'ps/2', 'ExplorerPS/2', N_("Generic") ], [ 3, 'ps/2', 'ExplorerPS/2', N_("Generic 3 Button Mouse with Wheel emulation"), 'wheel' ], [ 5, 'ps/2', 'ExplorerPS/2', N_("Wheel") ], [ 7, 'ps/2', 'ExplorerPS/2', N_("Microsoft Explorer") ], ] ], N_("serial") => [ [ map { "ttyS$_" } 0..3 ], [ [ 2, 'Microsoft', 'Microsoft', N_("Generic 2 Button Mouse") ], [ 3, 'Microsoft', 'Microsoft', N_("Generic 3 Button Mouse") ], [ 3, 'Microsoft', 'Microsoft', N_("Generic 3 Button Mouse with Wheel emulation"), 'wheel' ], [ 5, 'ms3', 'IntelliMouse', N_("Microsoft IntelliMouse") ], [ 3, 'MouseMan', 'MouseMan', N_("Logitech MouseMan") ], [ 3, 'MouseMan', 'MouseMan', N_("Logitech MouseMan with Wheel emulation"), 'wheel' ], [ 2, 'MouseSystems', 'MouseSystems', N_("Mouse Systems") ], '', [ 3, 'logim', 'MouseMan', N_("Logitech CC Series") ], [ 3, 'logim', 'MouseMan', N_("Logitech CC Series with Wheel emulation"), 'wheel' ], [ 5, 'pnp', 'IntelliMouse', N_("Logitech MouseMan+/FirstMouse+") ], [ 5, 'ms3', 'IntelliMouse', N_("Genius NetMouse") ], [ 2, 'MMSeries', 'MMSeries', N_("MM Series") ], [ 2, 'MMHitTab', 'MMHittab', N_("MM HitTablet") ], [ 3, 'Logitech', 'Logitech', N_("Logitech Mouse (serial, old C7 type)") ], [ 3, 'Logitech', 'Logitech', N_("Logitech Mouse (serial, old C7 type) with Wheel emulation"), 'wheel' ], [ 3, 'Microsoft', 'ThinkingMouse', N_("Kensington Thinking Mouse") ], [ 3, 'Microsoft', 'ThinkingMouse', N_("Kensington Thinking Mouse with Wheel emulation"), 'wheel' ], ] ], N_("busmouse") => [ [ arch() eq 'ppc' ? 'adbmouse' : ('atibm', 'inportbm', 'logibm') ], [ if_(arch() eq 'ppc', [ 1, 'Busmouse', 'BusMouse', N_("1 button") ]), [ 2, 'Busmouse', 'BusMouse', N_("2 buttons") ], [ 3, 'Busmouse', 'BusMouse', N_("3 buttons") ], [ 3, 'Busmouse', 'BusMouse', N_("3 buttons with Wheel emulation"), 'wheel' ], ] ], N_("Universal") => [ [ 'input/mice' ], [ [ 7, 'ps/2', 'ExplorerPS/2', N_("Any PS/2 & USB mice") ], [ 7, 'ps/2', 'ExplorerPS/2', N_("Force evdev") ], #- evdev is magically handled in mouse::select() if_(detect_devices::is_xbox(), [ 5, 'ps/2', 'IMPS/2', N_("Microsoft Xbox Controller S") ]), if_(detect_devices::is_virtualbox(), [ 7, 'ps/2', 'vboxmouse', N_("VirtualBox mouse") ]), ] ], N_("none") => [ [ 'none' ], [ [ 0, 'none', 'Microsoft', N_("No mouse") ], ] ], ); } #- Logitech MX700 #- #- I: Bus=0003 Vendor=046d Product=c506 Version=1600 #- N: Name="Logitech USB Receiver" #- P: Phys=usb-0000:00:11.3-2/input0 #- S: Sysfs=/class/input/input5 #- H: Handlers=mouse2 ts2 event3 #- B: EV=7 #- B: KEY=ffff0000 0 0 0 0 0 0 0 0 #- B: REL=103 #- #- T: Bus=05 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 4 Spd=1.5 MxCh= 0 #- D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 #- P: Vendor=046d ProdID=c506 Rev=16.00 #- S: Manufacturer=Logitech #- S: Product=USB Receiver #- C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 50mA #- I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid #- E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms sub xmouse2xId { #- xmousetypes must be sorted as found in /usr/include/X11/extensions/xf86misc.h #- so that first mean "0", etc my @xmousetypes = ( "Microsoft", "MouseSystems", "MMSeries", "Logitech", "BusMouse", #MouseMan, "Logitech", "PS/2", "MMHittab", "GlidePoint", "IntelliMouse", "ThinkingMouse", "IMPS/2", "ThinkingMousePS/2", "MouseManPlusPS/2", "GlidePointPS/2", "NetMousePS/2", "NetScrollPS/2", "SysMouse", "Auto", "AceCad", "ExplorerPS/2", "USB", ); my ($id) = @_; $id = 'BusMouse' if $id eq 'MouseMan'; $id = 'IMPS/2' if $id eq 'ExplorerPS/2' && $::isInstall; eval { find_index { $_ eq $id } @xmousetypes } || 0; } my %mouse_btn_keymap = ( 0 => "NONE", 67 => "F9", 68 => "F10", 87 => "F11", 88 => "F12", 85 => "F13", 89 => "F14", 90 => "F15", 56 => "L-Option/Alt", 125 => "L-Command (Apple)", 98 => "Num: /", 55 => "Num: *", 117 => "Num: =", 96 => "Enter", ); sub ppc_one_button_keys() { keys %mouse_btn_keymap } sub ppc_one_button_key2text { $mouse_btn_keymap{$_[0]} } sub raw2mouse { my ($type, $raw) = @_; $raw or return; my %l; @l{@mouses_fields} = @$raw; +{ %l, type => $type, if_($l{nbuttons} < 3, Emulate3Buttons => 1) }; } sub fullnames() { map_each { my $type = $::a; grep { $_ } map { if ($_) { my $l = raw2mouse($type, $_); "$type|$l->{name}"; } else { $type .= "|[" . N("Other") . "]"; ''; } } @{$::b->[1]}; } all_mice(); } sub fullname2mouse { my ($fname, %opts) = @_; my ($type, @l) = split '\|', $fname; my $name = pop @l; #- ensure we get rid of "[Other]" my %mice = all_mice(); if (my @devices = @{$mice{$type}[0]}) { member($opts{device}, @devices) or delete $opts{device}; $opts{device} ||= $devices[0]; } foreach (@{$mice{$type}[1]}) { my $l = raw2mouse($type, $_); $name eq $l->{name} and return { %$l, %opts }; } die "$fname not found ($type, $name)"; } sub serial_ports() { map { "ttyS$_" } 0..7 } sub serial_port2text { $_[0] =~ /ttyS(\d+)/ ? "$_[0] / COM" . ($1 + 1) : $_[0]; } sub read() { my %mouse = getVarsFromSh "$::prefix/etc/sysconfig/mouse"; eval { fullname2mouse($mouse{FULLNAME}, device => $mouse{device}) } || \%mouse; } sub write { my ($do_pkgs, $mouse) = @_; setVarsInSh("$::prefix/etc/sysconfig/mouse", { device => $mouse->{device}, MOUSETYPE => $mouse->{MOUSETYPE}, FULLNAME => qq($mouse->{type}|$mouse->{name}), }); various_xfree_conf($do_pkgs, $mouse); if (arch() =~ /ppc/) { my $s = join('', "dev.mac_hid.mouse_button_emulation = " . to_bool($mouse->{button2_key} || $mouse->{button3_key}) . "\n", if_($mouse->{button2_key}, "dev.mac_hid.mouse_button2_keycode = $mouse->{button2_key}\n"), if_($mouse->{button3_key}, "dev.mac_hid.mouse_button3_keycode = $mouse->{button3_key}\n"), ); substInFile { $_ = '' if /^\Qdev.mac_hid.mouse_button/; $_ .= $s if eof; } "$::prefix/etc/sysctl.conf"; } } sub input_entry_to_device_by_id { my ($input) = @_; my $ID_SERIAL = chomp_(run_program::get_stdout('usb_id', $input->{sysfs_path})); $ID_SERIAL =~ s/[^\w#+\-.:=@_]/_/g; #- udev do a further cleanup, eg: "Wacom_Co.,Ltd._MTE-450" => "Wacom_Co._Ltd._MTE-450". cf ALLOWED_CHARS udev.h my $sysfs_device = "input/by-id/usb-$ID_SERIAL-event-mouse"; #- from /etc/udev/rules.d/60-persistent-input.rules if ($::isInstall || -e "/dev/$sysfs_device") { $sysfs_device; } else { log::l("$sysfs_device missing"); (); } } sub probe_usb_wacom_devices() { detect_devices::hasWacom() or return; eval { modules::load("wacom", "evdev") }; map { input_entry_to_device_by_id($_) } detect_devices::usbWacom(); } sub detect_serial() { my ($t, $mouse, @wacom); #- Whouah! probing all devices from ttyS0 to ttyS3 once a time! detect_devices::probeSerialDevices(); #- check new probing methods keep everything used here intact! foreach (0..3) { $t = detect_devices::probeSerial("/dev/ttyS$_") or next; if ($t->{CLASS} eq 'MOUSE') { $t->{MFG} ||= $t->{MANUFACTURER}; my $name = 'Generic 2 Button Mouse'; $name = 'Microsoft IntelliMouse' if $t->{MFG} eq 'MSH' && $t->{MODEL} eq '0001'; $name = 'Logitech MouseMan' if $t->{MFG} eq 'LGI' && $t->{MODEL} =~ /^80/; $name = 'Genius NetMouse' if $t->{MFG} eq 'KYE' && $t->{MODEL} eq '0003'; $mouse ||= fullname2mouse("serial|$name", device => "ttyS$_"); last; } elsif ($t->{CLASS} eq "PEN" || $t->{MANUFACTURER} eq "WAC") { push @wacom, "ttyS$_"; } } $mouse, @wacom; } sub mice2evdev { my (@mice) = @_; [ map { #- we always use HWheelRelativeAxisButtons for evdev, it tells mice with no horizontal wheel to skip those buttons #- that way we ensure 6 & 7 is always horizontal wheel #- (cf patch skip-HWheelRelativeAxisButtons-even-if-unused in x11-driver-input-evdev) { device => "/dev/$_", HWheelRelativeAxisButtons => "7 6" }; } map { input_entry_to_device_by_id($_) } @mice ]; } sub detect_evdev_mice { my (@mice) = @_; my $imwheel; foreach (@mice) { my @l = $_->{usb} && $_->{usb}{driver} =~ /^Mouse:(.*)/ ? split('\|', $1) : (); foreach my $opt (@l) { if ($opt eq 'evdev') { $_->{want_evdev} = 1; } elsif ($opt =~ /imwheel:(.*)/) { $imwheel = $1; } } if ($_->{HWHEEL}) { $_->{want_evdev} = 1; } if ($_->{SIDE}) { $imwheel ||= 'generic'; } } my @evdev_mice = grep { $_->{want_evdev} } @mice; log::l("configuring mice with imwheel for thumb buttons (imwheel=$imwheel)") if $imwheel; log::l("configuring mice for evdev (" . join(' ', map { "$_->{vendor}:$_->{product}" } @evdev_mice) . ")") if @evdev_mice; { imwheel => $imwheel, evdev_mice_all => mice2evdev(@mice), if_(@evdev_mice, evdev_mice => mice2evdev(@evdev_mice)) }; } sub detect { my ($modules_conf) = @_; # let more USB tablets and touchscreens magically work at install time # through /dev/input/mice multiplexing: detect_devices::probe_category('input/tablet'); detect_devices::probe_category('input/touchscreen'); my @wacom = probe_usb_wacom_devices(); $modules_conf->get_probeall("usb-interface") and eval { modules::load('usbhid') }; if (detect_devices::is_virtualbox()) { fullname2mouse("Universal|VirtualBox mouse"); } elsif (my @mice = grep { $_->{Handlers}{mouse} } detect_devices::getInputDevices_and_usb()) { my @synaptics = map { { ALPS => $_->{ALPS} }; } grep { $_->{Synaptics} || $_->{ALPS} } @mice; my $evdev_opts = detect_evdev_mice(@mice); my $fullname = detect_devices::is_xbox() ? 'Universal|Microsoft Xbox Controller S' : arch() eq "ppc" ? 'USB|1 button' : 'Universal|Any PS/2 & USB mice'; fullname2mouse($fullname, wacom => \@wacom, synaptics => $synaptics[0], if_($evdev_opts, %$evdev_opts)); } elsif (arch() eq 'ppc') { # No need to search for an ADB mouse. If I did, the PPC kernel would # find one whether or not I had one installed! So.. default to it. fullname2mouse("busmouse|1 button"); } elsif (arch() =~ /^sparc/) { fullname2mouse("sunmouse|Sun - Mouse"); } else { #- probe serial device to make sure a wacom has been detected. eval { modules::load("serial") }; my ($serial_mouse, @serial_wacom) = detect_serial(); push @wacom, @serial_wacom; if ($serial_mouse) { { wacom => \@wacom, %$serial_mouse }; } elsif (@wacom) { #- in case only a wacom has been found, assume an inexistant mouse (necessary). fullname2mouse('none|No mouse', wacom => \@wacom); } else { fullname2mouse('Universal|Any PS/2 & USB mice', unsafe => 1); } } } sub load_modules { my ($mouse) = @_; my @l; push @l, qw(hid mousedev usbmouse) if $mouse->{type} =~ /USB/; push @l, qw(serial) if $mouse->{type} =~ /serial/ || any { /ttyS/ } @{$mouse->{wacom}}; push @l, qw(wacom evdev) if any { /event/ } @{$mouse->{wacom}}; push @l, qw(evdev) if $mouse->{synaptics} || $mouse->{evdev_mice}; eval { modules::load(@l) }; } sub set_xfree_conf { my ($mouse, $xfree_conf, $b_keep_auxmouse_unchanged) = @_; my @mice = map { { ($_->{Protocol} eq 'vboxmouse' ? "Driver" : "Protocol") => $_->{Protocol}, Device => devices::make($_->{device}), if_($_->{Emulate3Buttons} || $_->{EmulateWheel}, Emulate3Buttons => undef, Emulate3Timeout => 50), if_($_->{EmulateWheel}, EmulateWheel => undef, EmulateWheelButton => 2), }; } $mouse; if ($mouse->{evdev_mice}) { push @mice, @{$mouse->{evdev_mice}}; } elsif (!$mouse->{synaptics} && $b_keep_auxmouse_unchanged) { my (undef, @l) = $xfree_conf->get_mice; push @mice, @l; } $xfree_conf->set_mice(@mice); if (my @wacoms = @{$mouse->{wacom} || []}) { $xfree_conf->set_wacoms(map { { Device => "/dev/$_", USB => to_bool(m|input/by-path/event|) } } @wacoms); } $xfree_conf->set_synaptics({ ALPS => $mouse->{synaptics}{ALPS} }) if $mouse->{synaptics}; } sub various_xfree_conf { my ($do_pkgs, $mouse) = @_; #- we don't need this anymore. Remove it for upgrades unlink("$::prefix/etc/X11/xinit.d/mouse_buttons"); { my $f = "$::prefix/etc/X11/xinit.d/xpad"; if ($mouse->{name} !~ /^Microsoft Xbox Controller/) { unlink($f); } else { output_with_perm($f, 0755, "xset m 1/8 1\n"); } } my $inputdrvpath = '/usr/lib/xorg/modules/input'; my @pkgs = [ if_($mouse->{synaptics}, ['x11-driver-input-synaptics', "$inputdrvpath/synaptics_drv.so"]), if_($mouse->{evdev_mice}, ['x11-driver-input-evdev', "$inputdrvpath/evdev_drv.so"]), if_($mouse->{Protocol} eq 'vboxmouse', ['x11-driver-input-vboxmouse', "$inputdrvpath/vboxmouse_drv.so"]), if_($mouse->{imwheel}, ['imwheel', "/usr/bin/imwheel"]), if_(@{$mouse->{wacom}}, ['linuxwacom', "$inputdrvpath/wacom_drv.so"]), ]; $do_pkgs->ensure_files_are_installed(@pkgs, 1) if @pkgs; if ($mouse->{imwheel}) { my $rc = "/etc/X11/imwheel/imwheelrc.$mouse->{imwheel}"; eval { setVarsInSh("$::prefix/etc/X11/imwheel/startup.conf", { IMWHEEL_START => 1, IMWHEEL_PARAMS => join(' ', '-k', if_(-e "$::prefix$rc", '--rc', $rc)), }) }; } } #- write_conf : write the mouse infos into the Xconfig files. #- input : #- $mouse : the hashtable containing the informations #- $mouse input #- $mouse->{nbuttons} : number of buttons : integer #- $mouse->{device} : device of the mouse : string : ex 'psaux' #- $mouse->{Protocol} : type of the mouse for X : string (eg 'PS/2') #- $mouse->{type} : type (generic ?) of the mouse : string : ex 'PS/2' #- $mouse->{name} : name of the mouse : string : ex 'Standard' #- $mouse->{MOUSETYPE} : type of the mouse : string : ex "ps/2" sub write_conf { my ($do_pkgs, $modules_conf, $mouse, $b_keep_auxmouse_unchanged) = @_; &write($do_pkgs, $mouse); $modules_conf->write if $mouse->{device} eq "input/mice" && !$::testing; eval { require Xconfig::xfree; my $xfree_conf = Xconfig::xfree->read; set_xfree_conf($mouse, $xfree_conf, $b_keep_auxmouse_unchanged); $xfree_conf->write; }; } sub change_mouse_live { my ($mouse, $old) = @_; my $xId = xmouse2xId($mouse->{Protocol}); $old->{device} ne $mouse->{device} || $xId != xmouse2xId($old->{Protocol}) or return; log::l("telling X server to use another mouse ($mouse->{Protocol}, $xId)"); eval { modules::load('serial') } if $mouse->{device} =~ /ttyS/; if (!$::testing) { devices::make($mouse->{device}); symlinkf($mouse->{device}, "/dev/mouse"); eval { require xf86misc::main; xf86misc::main::setMouseLive($ENV{DISPLAY}, $xId, $mouse->{Emulate3Buttons}); }; } 1; } sub test_mouse_install { my ($mouse, $x_protocol_changed) = @_; require ugtk2; ugtk2->import(qw(:wrappers :create)); my $w = ugtk2->new(N("Testing the mouse"), disallow_big_help => 1); my $darea = Gtk2::DrawingArea->new; $darea->set_events([ 'button_press_mask', 'button_release_mask' ]); #$darea must be unrealized. gtkadd($w->{window}, gtkpack(my $vbox_grab = Gtk2::VBox->new(0, 0), $darea, gtkset_sensitive(create_okcancel($w, undef, '', 'edge'), 1) ), ); test_mouse($mouse, $darea, $x_protocol_changed); $w->sync; # HACK Gtk2::Gdk->pointer_grab($vbox_grab->window, 1, 'pointer_motion_mask', $vbox_grab->window, undef, 0); my $r = $w->main; Gtk2::Gdk->pointer_ungrab(0); $r; } sub select { my ($in, $mouse) = @_; my $prev = my $fullname = $mouse->{type} . '|' . $mouse->{name}; $in->ask_from_({ messages => N("Please choose your type of mouse."), title => N("Mouse choice"), interactive_help_id => 'selectMouse', if_($mouse->{unsafe}, cancel => ''), }, [ { list => [ fullnames() ], separator => '|', val => \$fullname, format => sub { join('|', map { translate($_) } split('\|', $_[0])) } } ]) or return; if ($fullname ne $prev) { my $mouse_ = fullname2mouse($fullname, device => $mouse->{device}); if ($fullname =~ /evdev/) { $mouse_->{evdev_mice} = $mouse_->{evdev_mice_all} = $mouse->{evdev_mice_all}; } %$mouse = %$mouse_; } if ($mouse->{nbuttons} < 3 && $::isStandalone) { $mouse->{Emulate3Buttons} = $in->ask_yesorno('', N("Emulate third button?"), 1); } if ($mouse->{type} eq 'serial') { $in->ask_from_({ title => N("Mouse Port"), messages => N("Please choose which serial port your mouse is connected to."), interactive_help_id => 'selectSerialPort', }, [ { list => [ serial_ports() ], format => \&serial_port2text, val => \$mouse->{device} } ]) or return &select; } if (arch() =~ /ppc/ && $mouse->{nbuttons} == 1) { #- set a sane default F11/F12 $mouse->{button2_key} = 87; $mouse->{button3_key} = 88; $in->ask_from('', N("Buttons emulation"), [ { label => N("Button 2 Emulation"), val => \$mouse->{button2_key}, list => [ ppc_one_button_keys() ], format => \&ppc_one_button_key2text }, { label => N("Button 3 Emulation"), val => \$mouse->{button3_key}, list => [ ppc_one_button_keys() ], format => \&ppc_one_button_key2text }, ]) or return; } 1; } sub test_mouse { my ($mouse, $darea, $b_x_protocol_changed) = @_; require ugtk2; ugtk2->import(qw(:wrappers)); my $suffix = $mouse->{nbuttons} <= 2 ? '2b' : $mouse->{nbuttons} == 3 ? '3b' : '3b+'; my %offsets = (mouse_2b_right => [ 93, 0 ], mouse_3b_right => [ 117, 0 ], mouse_2b_middle => [ 82, 80 ], mouse_3b_middle => [ 68, 0 ], 'mouse_3b+_middle' => [ 85, 67 ]); my %image_files = ( mouse => "mouse_$suffix", left => 'mouse_' . ($suffix eq '3b+' ? '3b' : $suffix) . '_left', right => 'mouse_' . ($suffix eq '3b+' ? '3b' : $suffix) . '_right', if_($mouse->{nbuttons} > 2, middle => 'mouse_' . $suffix . '_middle'), up => 'arrow_up', down => 'arrow_down'); my %images = map { $_ => ugtk2::gtkcreate_pixbuf("$image_files{$_}.png") } keys %image_files; my $width = $images{mouse}->get_width; my $height = round_up($images{mouse}->get_height, 6); my $draw_text = sub { my ($t, $y) = @_; my $layout = $darea->create_pango_layout($t); my ($w) = $layout->get_pixel_size; $darea->window->draw_layout($darea->style->black_gc, ($darea->allocation->width-$w)/2, ($darea->allocation->height-$height)/2 + $y, $layout); }; my $draw_pixbuf = sub { my ($p, $x, $y, $w, $h) = @_; $w = $p->get_width; $h = $p->get_height; $p->render_to_drawable($darea->window, $darea->style->bg_gc('normal'), 0, 0, ($darea->allocation->width-$width)/2 + $x, ($darea->allocation->height-$height)/2 + $y, $w, $h, 'none', 0, 0); }; my $draw_by_name = sub { my ($name) = @_; my $file = $image_files{$name}; my ($x, $y) = @{$offsets{$file} || [ 0, 0 ]}; $draw_pixbuf->($images{$name}, $x, $y); }; my $drawarea = sub { $draw_by_name->('mouse'); if ($::isInstall || 1) { $draw_text->(N("Please test the mouse"), 200); if ($b_x_protocol_changed && $mouse->{nbuttons} > 3 && $mouse->{device} eq 'psaux' && member($mouse->{Protocol}, 'IMPS/2', 'ExplorerPS/2')) { $draw_text->(N("To activate the mouse,"), 240); $draw_text->(N("MOVE YOUR WHEEL!"), 260); } } }; my $timeout; my $paintButton = sub { my ($nb) = @_; $timeout or $drawarea->(); if ($nb == 0) { $draw_by_name->('left'); } elsif ($nb == 2) { $draw_by_name->('right'); } elsif ($nb == 1) { if ($mouse->{nbuttons} >= 3) { $draw_by_name->('middle'); } else { my ($x, $y) = @{$offsets{mouse_2b_middle}}; $darea->window->draw_arc($darea->style->black_gc, 1, ($darea->allocation->width-$width)/2 + $x, ($darea->allocation->height-$height)/2 + $y, 20, 25, 0, 360 * 64); } } elsif ($mouse->{nbuttons} > 3) { my ($x, $y) = @{$offsets{$image_files{middle}}}; if ($nb == 3) { $draw_pixbuf->($images{up}, $x+6, $y-10); } elsif ($nb == 4) { $draw_pixbuf->($images{down}, $x+6, $y + $images{middle}->get_height + 2); } $draw_by_name->('middle'); $timeout and Glib::Source->remove($timeout); $timeout = Glib::Timeout->add(100, sub { $drawarea->(); $timeout = 0; 0 }); } }; $darea->signal_connect(button_press_event => sub { $paintButton->($_[1]->button - 1) }); $darea->signal_connect(scroll_event => sub { $paintButton->($_[1]->direction eq 'up' ? 3 : 4) }); $darea->signal_connect(button_release_event => $drawarea); $darea->signal_connect(expose_event => $drawarea); $darea->set_size_request($width, $height); } =begin =head1 NAME mouse - Perl functions to handle mice =head1 SYNOPSYS require modules; require mouse; mouse::detect(modules::any_conf->read); =head1 DESCRIPTION C is a perl module used by mousedrake to detect and configure the mouse. =head1 COPYRIGHT Copyright (C) 2000-2006 Mandriva This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. =cut