diff options
Diffstat (limited to 'lib/Xconfig/card.pm')
| -rw-r--r-- | lib/Xconfig/card.pm | 635 |
1 files changed, 635 insertions, 0 deletions
diff --git a/lib/Xconfig/card.pm b/lib/Xconfig/card.pm new file mode 100644 index 0000000..686957d --- /dev/null +++ b/lib/Xconfig/card.pm @@ -0,0 +1,635 @@ +package Xconfig::card; # $Id$ + +use diagnostics; +use strict; + +use detect_devices; +use modules; +use common; +use log; + + +my %VideoRams = ( + 256 => N_("256 kB"), + 512 => N_("512 kB"), + 1024 => N_("1 MB"), + 2048 => N_("2 MB"), + 4096 => N_("4 MB"), + 8192 => N_("8 MB"), + 16384 => N_("16 MB"), + 32768 => N_("32 MB"), + 65536 => N_("64 MB or more"), +); + +my $lib = arch() =~ /x86_64/ ? "lib64" : "lib"; + +my @xfree4_Drivers = ((arch() =~ /^sparc/ ? qw(sunbw2 suncg14 suncg3 suncg6 sunffb sunleo suntcx) : + qw(apm ark chips cirrus cyrix glide i128 i740 i810 imstt + mga neomagic newport nv rendition r128 radeon vesa + s3 s3virge savage siliconmotion sis tdfx tga trident tseng vmware)), + qw(ati glint vga fbdev)); + +sub from_raw_X { + my ($raw_X) = @_; + + my $device = $raw_X->get_device or die "no card configured"; + + my $card = { + use_DRI_GLX => eval { any { /dri/ } $raw_X->get_modules }, + %$device, + }; + add_to_card__using_Cards($card, $card->{BoardName}); + $card; +} + +sub to_raw_X { + my ($card, $raw_X) = @_; + + my @cards = ($card, @{$card->{cards} || []}); + + foreach (@cards) { + #- Specific ATI fglrx driver default options + if ($_->{Driver} eq 'fglrx') { + # $default_ATI_fglrx_config need to be move in proprietary ? + $_->{raw_LINES} ||= default_ATI_fglrx_config(); + } + if (arch() =~ /ppc/ && ($_->{Driver} eq 'r128' || $_->{Driver} eq 'radeon')) { + $_->{UseFBDev} = 1; + } + } + + $raw_X->set_devices(@cards); + + $raw_X->get_ServerLayout->{Xinerama} = { commented => !$card->{Xinerama}, Option => 1 } + if defined $card->{Xinerama}; + + # cleanup previous special nvidia libglx + $raw_X->remove_load_module($_) foreach @{$card->{REMOVE_GLX} || []}; + + if ($card->{DRI_GLX_SPECIAL}) { + $raw_X->remove_load_module('glx'); # this doesn't duplicate the above glx line + # This loads the NVIDIA GLX extension module. + # IT IS IMPORTANT TO KEEP NAME AS FULL PATH TO libglx.so ELSE + # IT WILL LOAD XFree86 glx module and the server will crash. + $raw_X->add_load_module($card->{DRI_GLX_SPECIAL}); + } else { + $raw_X->set_load_module('glx', $card->{Driver} ne 'fbdev'); #- glx for everyone, except proprietary nvidia and fbdev + $raw_X->set_load_module('dri', $card->{use_DRI_GLX}); + } + + $raw_X->remove_Section('DRI'); + + $raw_X->remove_load_module('v4l') if $card->{use_DRI_GLX} && $card->{Driver} eq 'r128'; +} + +sub default_ATI_fglrx_config() { our $default_ATI_fglrx_config } + +sub probe() { +#-for Pixel tests +#- my @c = { driver => 'Card:Matrox Millennium G400 DualHead', description => 'Matrox|Millennium G400 Dual HeadCard' }; + my @c = detect_devices::matching_driver__regexp('^(Card|Server|Driver):'); + + my @cards = map { + my @l = $_->{description} =~ /(.*?)\|(.*)/; + my $card = { + description => $_->{description}, + VendorName => $l[0], BoardName => $l[1], + BusID => "PCI:$_->{pci_bus}:$_->{pci_device}:$_->{pci_function}", + }; + if ($_->{driver} =~ /Card:(.*)/) { $card->{BoardName} = $1; add_to_card__using_Cards($card, $1) } + elsif ($_->{driver} =~ /Driver:(.*)/) { $card->{Driver} = $1 } + else { internal_error() } + + $card; + } @c; + + if (@cards >= 2 && $cards[0]{card_name} eq $cards[1]{card_name} && $cards[0]{card_name} eq 'Intel 830') { + shift @cards; + } + #- take a default on sparc if nothing has been found. + if (arch() =~ /^sparc/ && !@cards) { + log::l("Using probe with /proc/fb as nothing has been found!"); + my $s = cat_("/proc/fb"); + @cards = { server => $s =~ /Mach64/ ? "Mach64" : $s =~ /Permedia2/ ? "3DLabs" : "Sun24" }; + } + + #- disabling MULTI_HEAD when not available + foreach (@cards) { + $_->{MULTI_HEAD} && $_->{card_name} =~ /G[24]00/ or next; + if ($ENV{MATROX_HAL}) { + $_->{need_MATROX_HAL} = 1; + } else { + delete $_->{MULTI_HEAD}; + } + } + + #- in case of only one cards, remove all BusID reference, this will avoid + #- need of change of it if the card is moved. + #- on many PPC machines, card is on-board, BusID is important, leave? + if (@cards == 1 && !$cards[0]{MULTI_HEAD} && arch() !~ /ppc/) { + delete $cards[0]{BusID}; + } + + @cards; +} + +sub card_config__not_listed { + my ($in, $card, $options) = @_; + + my $vendors_regexp = join '|', map { quotemeta } ( + '3Dlabs', + 'AOpen', 'ASUS', 'ATI', 'Ark Logic', 'Avance Logic', + 'Cardex', 'Chaintech', 'Chips & Technologies', 'Cirrus Logic', 'Compaq', 'Creative Labs', + 'Dell', 'Diamond', 'Digital', + 'ET', 'Elsa', + 'Genoa', 'Guillemot', 'Hercules', 'Intel', 'Leadtek', + 'Matrox', 'Miro', 'NVIDIA', 'NeoMagic', 'Number Nine', + 'Oak', 'Orchid', + 'RIVA', 'Rendition Verite', + 'S3', 'Silicon Motion', 'STB', 'SiS', 'Sun', + 'Toshiba', 'Trident', + 'VideoLogic', + ); + my $cards = readCardsDB("$ENV{SHARE_PATH}/ldetect-lst/Cards+"); + + my @xf4 = grep { $options->{allowFB} || $::isStandalone || $_ ne 'fbdev' } @xfree4_Drivers; + my @list = ( + (map { 'Vendor|' . $_ } keys %$cards), + (map { 'Xorg|' . $_ } @xf4), + ); + + my $r = exists $cards->{$card->{BoardName}} ? "Vendor|$card->{BoardName}" : 'Xorg|vesa'; + $in->ask_from_({ title => N("X server"), + messages => N("Choose an X server"), + interactive_help_id => 'configureX_card_list', + }, + [ { val => \$r, separator => '|', list => \@list, sort => 1, + format => sub { $_[0] =~ /^Vendor\|($vendors_regexp)\s*-?(.*)/ ? "Vendor|$1|$2" : + $_[0] =~ /^Vendor\|(.*)/ ? "Vendor|Other|$1" : $_[0] } } ]) or return; + + log::explanations("Xconfig::card: $r manually chosen"); + + $r eq "Vendor|$card->{BoardName}" and return 1; #- it is unchanged, do not modify $card + + my ($kind, $s) = $r =~ /(.*?)\|(.*)/; + + %$card = (); + if ($kind eq 'Vendor') { + add_to_card__using_Cards($card, $s); + } else { + $card->{Driver} = $s; + } + $card->{manually_chosen} = 1; + 1; +} + +sub multi_head_choose { + my ($in, $auto, @cards) = @_; + + my @choices = multi_head_choices('', @cards); + + my $tc = $choices[0]; + if ($auto) { + @choices == 1 or return; + } else { + $tc = $in->ask_from_listf(N("Multi-head configuration"), + N("Your system supports multiple head configuration. +What do you want to do?"), sub { $_[0]{text} }, \@choices) or return; + } + $tc->{code} or die internal_error(); + return $tc->{code}(); +} + +sub configure_auto_install { + my ($raw_X, $do_pkgs, $old_X, $options) = @_; + + my $card = $old_X->{card} || {}; + + if ($card->{card_name}) { + #- try to get info from given card_name + add_to_card__using_Cards($card, $card->{card_name}); + if (!$card->{Driver}) { + log::l("bad card_name $card->{card_name}, using probe"); + undef $card->{card_name}; + } + } + + if (!$card->{Driver}) { + my @cards = probe(); + my ($choice) = multi_head_choices($old_X->{Xinerama}, @cards); + $card = $choice ? $choice->{code}() : do { + log::explanations('no graphic card probed, try providing one using $o->{card}{Driver} or $o->{card}{card_name}. Defaulting...'); + { Driver => $options->{allowFB} ? 'fbdev' : 'vesa' }; + }; + } + + my ($glx_choice) = xfree_and_glx_choices($card); + log::explanations("Using $glx_choice->{text}"); + $glx_choice->{code}(); + set_glx_restrictions($card); + + install_server($card, $options, $do_pkgs); + if ($card->{needVideoRam} && !$card->{VideoRam}) { + $card->{VideoRam} = $options->{VideoRam_probed} || 4096; + log::explanations("argh, I need to know VideoRam! Taking " . ($options->{probed_VideoRam} ? "the probed" : "a default") . " value: VideoRam = $card->{VideoRam}"); + } + to_raw_X($card, $raw_X); + $card; +} + +sub configure { + my ($in, $raw_X, $do_pkgs, $auto, $options) = @_; + + my @cards = probe(); + @cards or @cards = {}; + + if (!$cards[0]{Driver}) { + if ($options->{allowFB}) { + $cards[0]{Driver} = 'fbdev'; + } elsif ($auto) { + log::explanations("Xconfig::card: auto failed (unknown card and no allowFB)"); + return 0; + } + } + if (!$auto) { + card_config__not_listed: + card_config__not_listed($in, $cards[0], $options) or return; + } + + my $card = multi_head_choose($in, $auto, @cards) or return; + + xfree_and_glx_choose($in, $card, $auto) or return; + + eval { install_server($card, $options, $do_pkgs) }; + if ($@) { + $in->ask_warn('', N("Can not install Xorg package: %s", $@)); + goto card_config__not_listed; + } + + if ($card->{needVideoRam} && !$card->{VideoRam}) { + if ($auto) { + log::explanations("Xconfig::card: auto failed (needVideoRam)"); + return; + } + $card->{VideoRam} = (find { $_ <= $options->{VideoRam_probed} } reverse ikeys %VideoRams) || 4096; + $in->ask_from('', N("Select the memory size of your graphics card"), + [ { val => \$card->{VideoRam}, + type => 'list', + list => [ ikeys %VideoRams ], + format => sub { translate($VideoRams{$_[0]}) }, + not_edit => !$::expert } ]) or return; + } + + to_raw_X($card, $raw_X); + $card; +} + +sub install_server { + my ($card, $options, $do_pkgs) = @_; + + my $prog = "$::prefix/usr/X11R6/bin/Xorg"; + + my @packages; + push @packages, 'xorg-x11-server' if ! -x $prog; + + #- additional packages to install according available card. + #- add XFree86-libs-DRI here if using DRI (future split of XFree86 TODO) + if ($card->{use_DRI_GLX}) { + push @packages, 'Glide_V5' if $card->{card_name} eq 'Voodoo5 (generic)'; + push @packages, 'Glide_V3-DRI' if member($card->{card_name}, 'Voodoo3 (generic)', 'Voodoo Banshee (generic)'); + push @packages, 'xorg-x11-glide-module' if $card->{card_name} =~ /Voodoo/; + } + + if ($options->{freedriver}) { + delete $card->{Driver2}; + } + + my %nvidia_packages = ( + #- using NVIDIA Legacy driver for old NVIDIA cards (TNT, TNT2, Vanta, Quadro, Quadro2, GeForce and GeForce2): + legacy => [ qw(nvidia_legacy-kernel nvidia_legacy) ], + #- using current NVIDIA driver for recent NVIDIA cards (Geforce/Quadro 3/4/FX/6x00/NVS): + new => [ qw(nvidia-kernel nvidia) ], + ); + + my %proprietary_Driver2 = ( + nvidia => $nvidia_packages{ $card->{NVIDIA_LEGACY} ? 'legacy' : 'new' }, + fglrx => [ 'ati-kernel', 'ati' ], #- using ATI fglrx driver (Radeon, Fire GL cards only). + ); + if (my $rpms_needed = $proprietary_Driver2{$card->{Driver2}}) { + if (my $proprietary_packages = $do_pkgs->check_kernel_module_packages($rpms_needed->[0], $rpms_needed->[1])) { + push @packages, @$proprietary_packages; + # prevent having both nvidia & nvidia_legacy driver installed due to incompatibility: + if ($card->{Driver2} eq 'nvidia') { + $do_pkgs->remove($_) foreach @{$do_pkgs->check_kernel_module_packages(@{$nvidia_packages{ $card->{NVIDIA_LEGACY} ? 'new' : 'legacy' }})}; + } + } + } + + $do_pkgs->install(@packages) if @packages; + -x $prog or die "server not available (should be in $prog)"; + + my $modules_dir = "/usr/X11R6/$lib/modules"; + my $new_nvidia_libglx = "$modules_dir/extensions/nvidia/libglx.so"; + my $old_nvidia_libglx = "$modules_dir/extensions/libglx.so"; + #- make sure everything is correct at this point, packages have really been installed + #- and driver and GLX extension is present. + if ($card->{Driver2} eq 'nvidia' && + (-e "$::prefix$modules_dir/drivers/nvidia_drv.o" || -e "$::prefix$modules_dir/drivers/nvidia_drv.so")) { + #- when there is extensions/libglx.a, it means extensions/libglx.so is not xorg's libglx, so it may be nvidia's + #- new nvidia packages have libglx.so in extensions/nvidia instead of simply extensions/ + my $libglx_a = -e "$::prefix$modules_dir/extensions/libglx.a"; + my $libglx = find { -l "$::prefix$_" } $new_nvidia_libglx, if_($libglx_a, $old_nvidia_libglx); + if ($libglx) { + log::explanations("Using specific NVIDIA driver and GLX extensions"); + $card->{Driver} = 'nvidia'; + $card->{DRI_GLX_SPECIAL} = $libglx; + } + } + if ($card->{Driver2} eq 'fglrx' && + -e "$::prefix$modules_dir/dri/fglrx_dri.so" && + (-e "$::prefix$modules_dir/drivers/fglrx_drv.o" || -e "$::prefix$modules_dir/drivers/fglrx_drv.so")) { + log::explanations("Using specific ATI fglrx and DRI drivers"); + $card->{Driver} = 'fglrx'; + } + $card->{REMOVE_GLX} = [ $old_nvidia_libglx, $new_nvidia_libglx ]; + + libgl_config($card); + + if ($card->{need_MATROX_HAL}) { + require Xconfig::proprietary; + Xconfig::proprietary::install_matrox_hal($::prefix); + } +} + +sub xfree_and_glx_choose { + my ($in, $card, $auto) = @_; + + my @choices = xfree_and_glx_choices($card); + + my $tc = + $auto ? $choices[0] : + $in->ask_from_listf_raw({ title => N("Xorg configuration"), + messages => formatAlaTeX(join("\n\n\n", (grep { $_ } map { $_->{more_messages} } @choices), + N("Which configuration of Xorg do you want to have?"))), + interactive_help_id => 'configureX_xfree_and_glx', + }, + sub { $_[0]{text} }, \@choices) or return; + log::explanations("Using $tc->{text}"); + $tc->{code}(); + set_glx_restrictions($card); + 1; +} + +sub multi_head_choices { + my ($want_Xinerama, @cards) = @_; + my @choices; + + my $has_multi_head = @cards > 1 || @cards && $cards[0]{MULTI_HEAD} > 1; + my $disable_multi_head = any { + $_->{Driver} or log::explanations("found card $_->{description} not supported by XF4, disabling multi-head support"); + !$_->{Driver}; + } @cards; + + if ($has_multi_head && !$disable_multi_head) { + my $configure_multi_head = sub { + + #- special case for multi head card using only one BusID. + @cards = map { + map_index { { Screen => $::i, %$_ } } ($_) x ($_->{MULTI_HEAD} || 1); + } @cards; + + my $card = shift @cards; #- assume good default. + $card->{cards} = \@cards; + $card->{Xinerama} = $_[0]; + $card; + }; + my $independent = { text => N("Configure all heads independently"), code => sub { $configure_multi_head->('') } }; + my $xinerama = { text => N("Use Xinerama extension"), code => sub { $configure_multi_head->(1) } }; + push @choices, $want_Xinerama ? ($xinerama, $independent) : ($independent, $xinerama); + } + + foreach my $c (@cards) { + push @choices, { text => N("Configure only card \"%s\"%s", $c->{description}, $c->{BusID} && " ($c->{BusID})"), + code => sub { $c } }; + } + @choices; +} + +#- Xorg version available, it would be better to parse available package and get version from it. +sub xorg_version() { '6.9' } + +sub xfree_and_glx_choices { + my ($card) = @_; + + my @choices = if_($card->{Driver}, { text => N("Xorg %s", xorg_version()), code => sub {} }); + + #- no GLX with Xinerama + return @choices if $card->{Xinerama}; + + #- ask the expert or any user on second pass user to enable or not hardware acceleration support. + if ($card->{DRI_GLX}) { + unshift @choices, { text => N("Xorg %s with 3D hardware acceleration", xorg_version()), + code => sub { $card->{use_DRI_GLX} = 1 }, + more_messages => N("Your card can have 3D hardware acceleration support with Xorg %s.", xorg_version()), + }; + } + + #- an expert user may want to try to use an EXPERIMENTAL 3D acceleration. + if ($card->{DRI_GLX_EXPERIMENTAL} && $::expert) { + push @choices, { text => N("Xorg %s with EXPERIMENTAL 3D hardware acceleration", xorg_version()), + code => sub { $card->{use_DRI_GLX} = 1 }, + more_messages => N("Your card can have 3D hardware acceleration support with Xorg %s, +NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.", xorg_version()), + }; + } + @choices; +} + +sub set_glx_restrictions { + my ($card) = @_; + + #- 3D acceleration configuration for XFree 4 using DRI, this is enabled by default + #- but for some there is a need to specify VideoRam (else it will not run). + if ($card->{use_DRI_GLX}) { + $card->{needVideoRam} = 1 if $card->{description} =~ /Matrox.* G[245][05]0/; + ($card->{needVideoRam}, $card->{VideoRam}) = (1, 16384) + if member($card->{card_name}, 'Intel 810', 'Intel 815'); + + #- hack for ATI Rage 128 card using a bttv or peripheral with PCI bus mastering exchange + #- AND using DRI at the same time. + if (member($card->{card_name}, 'ATI Rage 128', 'ATI Rage 128 TVout', 'ATI Rage 128 Mobility')) { + $card->{Options}{UseCCEFor2D} = bool2text(modules::probe_category('multimedia/tv')); + } + } + + #- check for Matrox G200 PCI cards, disable AGP in such cases, causes black screen else. + if (member($card->{card_name}, 'Matrox Millennium 200', 'Matrox Millennium 200', 'Matrox Mystique') && $card->{description} !~ /AGP/) { + log::explanations("disabling AGP mode for Matrox card, as it seems to be a PCI card"); + log::explanations("this is only used for XFree 3.3.6, see /etc/X11/glx.conf"); + substInFile { s/^\s*#*\s*mga_dma\s*=\s*\d+\s*$/mga_dma = 0\n/ } "$::prefix/etc/X11/glx.conf"; + } +} + +sub libgl_config { + my ($card) = @_; + + my $dir = "$::prefix/etc/ld.so.conf.d"; + my $comment = '# commented-by-DrakX '; + + my %driver_to_libgl_config = ( + nvidia => $card->{NVIDIA_LEGACY} ? 'nvidia_legacy.conf' : 'nvidia.conf', + nvidia_other => !$card->{NVIDIA_LEGACY} ? 'nvidia_legacy.conf' : 'nvidia.conf', + fglrx => 'ati.conf', + ); + my $need_to_run_ldconfig; + my $wanted = $driver_to_libgl_config{$card->{Driver}}; + foreach my $file (values %driver_to_libgl_config) { + substInFile { + my ($commented, $s) = /^(\Q$comment\E)?(.*)/; + if ($file eq $wanted) { + $_ = "$s\n"; + $need_to_run_ldconfig ||= $commented; + } else { + $_ = "$comment$s\n"; + $need_to_run_ldconfig ||= !$commented; + } + } "$dir/$file" if -e "$dir/$file"; + } + if ($::isStandalone && $need_to_run_ldconfig) { + log::explanations("ldconfig will be run because the GL library was " . ($wanted ? 'enabled' : 'disabled')); + system("/sbin/ldconfig"); + } +} + +sub add_to_card__using_Cards { + my ($card, $name) = @_; + my $cards = readCardsDB("$ENV{SHARE_PATH}/ldetect-lst/Cards+"); + add2hash($card, $cards->{$name}); + $card->{BoardName} = $card->{card_name}; + + $card; +} + +#- needed for bad cards not restoring cleanly framebuffer, according to which version of Xorg are used. +sub check_bad_card { + my ($card) = @_; + my $bad_card = $card->{BAD_FB_RESTORE}; + $bad_card ||= $card->{Driver} eq 'i810' || $card->{Driver} eq 'fbdev'; + $bad_card ||= member($card->{Driver}, 'nvidia', 'vmware') if !$::isStandalone; #- avoid testing during install at any price. + + log::explanations("the graphics card does not like X in framebuffer") if $bad_card; + + !$bad_card; +} + +sub readCardsDB { + my ($file) = @_; + my ($card, %cards); + + my $F = openFileMaybeCompressed($file); + + my $lineno = 0; + my ($cmd, $val); + my $fs = { + NAME => sub { + $cards{$card->{card_name}} = $card if $card; + $card = { card_name => $val }; + }, + SEE => sub { + my $c = $cards{$val} or die "Error in database, invalid reference $val at line $lineno"; + add2hash($card, $c); + }, + LINE => sub { $val =~ s/^\s*//; $card->{raw_LINES} .= "$val\n" }, + CHIPSET => sub { $card->{Chipset} = $val }, + DRIVER => sub { $card->{Driver} = $val }, + DRIVER2 => sub { $card->{Driver2} = $val }, + NEEDVIDEORAM => sub { $card->{needVideoRam} = 1 }, + DRI_GLX => sub { $card->{DRI_GLX} = 1 if $card->{Driver} }, + DRI_GLX_EXPERIMENTAL => sub { $card->{DRI_GLX_EXPERIMENTAL} = 1 if $card->{Driver} }, + MULTI_HEAD => sub { $card->{MULTI_HEAD} = $val if $card->{Driver} }, + BAD_FB_RESTORE => sub { $card->{BAD_FB_RESTORE} = 1 }, + FB_TVOUT => sub { $card->{FB_TVOUT} = 1 }, + UNSUPPORTED => sub { delete $card->{Driver} }, + NVIDIA_LEGACY => sub { $card->{NVIDIA_LEGACY} = 1 }, + + COMMENT => sub {}, + }; + + local $_; + while (<$F>) { $lineno++; + s/\s+$//; + /^#/ and next; + /^$/ and next; + /^END/ and do { $cards{$card->{card_name}} = $card if $card; last }; + + ($cmd, $val) = /(\S+)\s*(.*)/ or next; + + my $f = $fs->{$cmd}; + + $f ? $f->() : log::l("unknown line $lineno ($_)"); + } + \%cards; +} + +our $default_ATI_fglrx_config = <<'END'; +# === disable PnP Monitor === +#Option "NoDDC" +# === disable/enable XAA/DRI === +Option "no_accel" "no" +Option "no_dri" "no" +# === FireGL DDX driver module specific settings === +# === Screen Management === +Option "DesktopSetup" "0x00000000" +Option "MonitorLayout" "AUTO, AUTO" +Option "IgnoreEDID" "off" +Option "HSync2" "unspecified" +Option "VRefresh2" "unspecified" +Option "ScreenOverlap" "0" +# === TV-out Management === +Option "NoTV" "yes" +Option "TVStandard" "NTSC-M" +Option "TVHSizeAdj" "0" +Option "TVVSizeAdj" "0" +Option "TVHPosAdj" "0" +Option "TVVPosAdj" "0" +Option "TVHStartAdj" "0" +Option "TVColorAdj" "0" +Option "GammaCorrectionI" "0x00000000" +Option "GammaCorrectionII" "0x00000000" +# === OpenGL specific profiles/settings === +Option "Capabilities" "0x00000000" +# === Video Overlay for the Xv extension === +Option "VideoOverlay" "on" +# === OpenGL Overlay === +# Note: When OpenGL Overlay is enabled, Video Overlay +# will be disabled automatically +Option "OpenGLOverlay" "off" +Option "CenterMode" "off" +# === QBS Support === +Option "Stereo" "off" +Option "StereoSyncEnable" "1" +# === Misc Options === +Option "UseFastTLS" "0" +Option "BlockSignalsOnLock" "on" +Option "UseInternalAGPGART" "no" +Option "ForceGenericCPU" "no" +# === FSAA === +Option "FSAAScale" "1" +Option "FSAADisableGamma" "no" +Option "FSAACustomizeMSPos" "no" +Option "FSAAMSPosX0" "0.000000" +Option "FSAAMSPosY0" "0.000000" +Option "FSAAMSPosX1" "0.000000" +Option "FSAAMSPosY1" "0.000000" +Option "FSAAMSPosX2" "0.000000" +Option "FSAAMSPosY2" "0.000000" +Option "FSAAMSPosX3" "0.000000" +Option "FSAAMSPosY3" "0.000000" +Option "FSAAMSPosX4" "0.000000" +Option "FSAAMSPosY4" "0.000000" +Option "FSAAMSPosX5" "0.000000" +Option "FSAAMSPosY5" "0.000000" +END + +1; + |