Partitioning

Föreslagen partitionering

In this screen you can see the content of your hard drive(s) along with the DrakX partitioning proposals for where to install Mageia.

The actual options available from those shown below will vary according to the layout and content of your particular hard drive(s).

Huvudsakliga alternativ

Använd befintliga partitioner

Om det här alternativet är tillgängligt så har kompatibla Linux-partitioner hittats och kan användas för installation.
Använd oanvänt utrymme

Om du har ledigt utrymme på din hårddisk kommer det här alternativet att använda det för att installera Mageia.
Använd oanvänt utrymme i en Windows-partition

If you have unused space on an existing Windows partition, the installer may offer to use it. This can be a useful way of making room for your new Mageia installation, but is a risky operation so you should make sure you have backed up all important files!

With this option, the installer displays the remaining Windows partition in light blue and the proposed Mageia partition in dark blue with their intended sizes just underneath. You have the option to modify these sizes by clicking and dragging the gap between both partitions. See the following screenshot:

Radera och använd hela hårddisken

This option will allocate the entire drive for Mageia


	This will erase ALL data on the selected hard drive. Take care! If you intend to use part of the disk for something else, or you already have data on the drive that you are not prepared to lose, then do not use this option.


	Observera att det innebär att storleken på Windows-partitionen krymps. Partitionen måste vara "ren", dvs. att Windows måste ha stängts av korrekt när det användes sist. Den måste också ha defragmenterats, även om det inte är någon garanti för att filerna har flyttats bort ifrån ytan som kommer att användas. Du rekommenderas starkt att säkerhetskopiera dina personliga filer.

Anpassad diskpartitionering

Detta ger dig fullständig kontroll över placeringen av installationen på din/a disk/ar.

If you are not using the Custom disk partitioning option, then the installer will allocate the available space according to the following rules:

If the total available space is less than 50 GB, then only one partition is created. This will be the / (root) partition.
If the total available space is greater than 50 GB, then three partitions are created
- 6/19 of the total available place is allocated to / with a maximum of 50 GB
- 1/19 is allocated to swap with a maximum of 4 GB
- the rest (at least 12/19) is allocated to /home

This means that from 160 GB or greater available space, the installer will create three partitions:

50 GB för /
4 GB för swap
och det som återstår till /home

If you are using a UEFI system, the ESP (EFI System Partition) will be automatically detected - or created if it does not exist yet - and mounted on /boot/EFI. The Custom disk partitioning option is the only one that allows to check it has been correctly done.

If you are using a Legacy (also known as BIOS) system with a GPT partitioned disk, you need to create a BIOS boot partition if it doesn't already exist. It should be about 1 MiB with no mount point. It can be created with the Installer, under Custom disk partitioning, like any other partition. Be sure to select ”BIOS boot partition” for filesystem type.

See DiskDrake for information on how to proceed.

Some newer drives are now using 4096 byte logical sectors, instead of the previous standard of 512. Due to lack of available hardware, the partitioning tool used in the installer has not been tested with such a drive.

Some SSD devices now use an erase block size over 1 MB. If you have such a device we suggest that you partition the drive in advance, using an alternative partitioning tool like gparted, and to use the following settings:

Justera till = MiB
Free space preceding (MiB) = 2

Also make sure all partitions are created using an even number of megabytes.

Välj monteringspunkter

Here you see the Linux partitions that have been found on your computer. If you don't agree with the DrakX suggestions, you can change the mount points yourself.

To the left of the drop-down menus is a list of available partitions. For example: sda is a hard drive - and 5 is a partition number, followed by the (capacity, mount point, filesystem type) of the partition.
If you have several partitions, you can choose various different mount points from the drop down menu, such as /, /home and /var. You can even make your own mount points, for instance /video for a partition where you want to store your films, or perhaps /Data for all your data files.
For any partitions that you don't need to make use of, you can leave the mount point field blank.


	If you make any changes here, ensure you still have a `/` (root) partition.


	If you are not sure what to choose, click Previous to go back and then tick Custom disk partitioning, where you can click on a partition to see its type and size.

If you are sure the mount points are correct, click on Next, and choose whether you only want to format the partition suggested by DrakX, or more.

Bekräfta hårddisken som ska formateras

Klicka på Föregående om du är osäker på ditt val.
Click on Next to proceed if you are sure that it is OK to erase every partition, every operating system and all data that might be on that hard disk.

Anpassad diskpartitionering med DiskDrake

Modify the layout of your disk(s) here. You can remove or create partitions, change the filesystem or size of a partition and even view their details before you start.
There is a tab at the top for every detected hard disk (or other storage device, like a USB key). In the screenshot above there are two available devices: sda and sdb.
For all other actions: click on the desired partition first. Then view it, or choose a filesystem and a mount point, resize it or wipe it. Expert mode provides more options such as to label (name) a partition, or to choose a partition type.
Continue until you have adjusted everything to your satisfaction, then click Done when you're ready.


	Take care with the Clear all option, use it only if you are sure you want to wipe all partitions on the selected storage device. If you wish to use encryption on your `/` partition you must ensure that you have a separate `/boot` partition. The encryption option for the `/boot` partition must NOT be set, otherwise your system will be unbootable.


	If you are installing Mageia on a UEFI system, check that an ESP (EFI System Partition) is present and correctly mounted on `/boot/EFI`. See Figure 1 below. If you are installing Mageia on a Legacy/GPT system, check that a BIOS boot partition is present and of the correct type. See Figure 2 below.

Formatering

Here you can choose which partition(s) you wish to format. Any data on partitions not marked for formatting will be preserved.

Usually, at least the partitions that DrakX selected need to be formatted.

Click on Advanced to choose the partitions you want to check for so-called bad blocks


	If you're not sure you have made the right choice, you can click on Previous, again on Previous and then on Custom to get back to the main screen, where you can choose to view details of your partitions.

When you are confident about the selections, click on Next to continue.