From bdde28384c351129b0ae84ffc50115a5b2975c78 Mon Sep 17 00:00:00 2001 From: Papoteur Date: Sun, 11 Jun 2023 13:45:27 +0200 Subject: Update for Mageia 9 --- cs/setupBootloader.html | 108 +++++++++++++++++++++++++++++++++--------------- 1 file changed, 74 insertions(+), 34 deletions(-) (limited to 'cs/setupBootloader.html') diff --git a/cs/setupBootloader.html b/cs/setupBootloader.html index 435a408..90be968 100644 --- a/cs/setupBootloader.html +++ b/cs/setupBootloader.html @@ -22,13 +22,24 @@ + + + + + + + -
+ + + + +
-

Dostupné Zavaděče +

Dostupné zavaděče

@@ -67,7 +78,7 @@
-

Grub2-efi on UEFI systems

+

Grub2-efi na UEFI systémech

  • @@ -142,11 +153,11 @@
-
+
-

Nastavení Bootloaderu +

Nastavení zavaděče

@@ -237,7 +248,7 @@
  • -

    Delay before booting the default image

    +

    Prodleva před spuštěním výchozího obrazu

    This text box lets you set a delay, in seconds, before the default operating system is started up. @@ -246,7 +257,7 @@

  • -

    Security

    +

    Zabezpečení

    This allows you to set a password for the bootloader. This means a username and password will be required when booting in order to select a booting @@ -265,7 +276,7 @@

  • -

    Password (again)

    +

    Heslo (znovu)

    Retype the password and DrakX will check that it matches with the one set above @@ -275,13 +286,13 @@

  • -

    Advanced

    +

    Rozšířené

    • -

      Enable ACPI

      +

      Povolit ACPI

      ACPI (Advanced Configuration and Power Interface) is a standard for power management. It can save energy by stopping unused devices. Deselecting it @@ -293,7 +304,7 @@

    • -

      Enable SMP

      +

      Povolit SMP

      This option enables/disables symmetric multiprocessing for multi-core processors @@ -302,7 +313,7 @@

    • -

      Enable APIC

      +

      Povolit APIC

      Enabling this gives the operating system access to the Advanced Programmable Interrupt Controller. APIC devices permit more complex priority models, and @@ -312,7 +323,7 @@

    • -

      Enable Local APIC

      +

      Povolit lokální APIC

      Here you can set Local APIC, which manages all external interrupts for a specific processor in an SMP system @@ -342,23 +353,31 @@

      +

      Your rEFInd configuration options:

      +
      -

      Your rEFInd configuration options:

      • -

        Install or update rEFInd in the EFI system - partition.

        +

        Install or update rEFInd in the EFI system + partition.

      • -

        Install in EFI/Boot partition (workaround for some - BIOS's).

        +

        Install in /EFI/BOOT.

        + +

        This option installs the bootloader in the /EFI/BOOT directory of the ESP + (EFI System Partition). This can be useful when: +

        -

        With some BIOS's, the newly written bootloader for Mageia at end of the - installation will not be recognized. In that case, you can use this option - as a workaround for the issue. +

        (a) Installing onto a removable drive (e.g. a USB stick) that can be removed + and plugged into a different machine. If the bootloader is stored in + /EFI/BOOT, UEFI BIOS's will detect it and allow you to boot from that drive. +

        + +

        (b) As a workaround where, due to a buggy UEFI BIOS, the newly written + bootloader for Mageia will not be recognized at end of the installation.

      • @@ -366,7 +385,7 @@

      If you did not select rEFInd as the bootloader to use in the previous - section, then your bootloader configurations are shown below: + section, then your bootloader configuration options are shown below:

      @@ -374,14 +393,14 @@
      • -

        Default

        +

        Výchozí

        -

        The operating system to be started up by default.

        +

        Operační systém, který má startovat jako výchozí.

      • -

        Append

        +

        Přidat

        This option lets you pass information to the kernel or tell the kernel to give you more information as it boots. @@ -390,7 +409,7 @@

      • -

        Probe foreign OS

        +

        Zkoušet cizí OS

        If you already have other operating systems installed, Mageia attempts to add them to your new Mageia boot menu. If you don't want this behaviour, @@ -398,17 +417,38 @@

      • +
      • + +

        Install in /EFI/BOOT. (Note: this menu + option only becomes available where the installer detects that a machine is + in UEFI mode). +

        + +

        This option installs the bootloader in the /EFI/BOOT directory of the ESP + (EFI System Partition). This can be useful when: +

        + +

        (a) Installing onto a removable drive (e.g. a USB stick) that can be removed + and plugged into a different machine. If the bootloader is stored in + /EFI/BOOT, UEFI BIOS's will detect it and allow you to boot from that drive. +

        + +

        (b) As a workaround where, due to a buggy UEFI BIOS, the newly written + bootloader for Mageia will not be recognized at end of the installation. +

        + +
    -

    Advanced

    +

    Rozšířené

    • -

      Video mode

      +

      Video režim

      This sets the screen size and colour depth to be used by the boot menu. If you click the down-triangle you will be offered other size and colour depth @@ -418,7 +458,7 @@

    • -

      Do not touch ESP or MBR

      +

      Neměnit ESP nebo MBR

      Select this option if you don't want a bootable Mageia, but would rather chain-load it from another OS. You will get a warning that the bootloader is @@ -459,7 +499,7 @@

      -

      Další volby +

      Další volby

      @@ -470,7 +510,7 @@
      -

      Použití už existujícího zavaděče +

      Použití už existujícího zavaděče

      @@ -478,7 +518,7 @@

      The exact procedure for adding Mageia to an existing bootloader is beyond - the scope of this documentation. However in most cases it will involve + the scope of this documentation. However, in most cases it will involve running the relevant bootloader installation program, which should detect Mageia and automatically add an entry for it in the bootloader menu. See the documentation for the relevant operating system. @@ -486,11 +526,11 @@

      -
      +
      -

      Installing Without a Bootloader +

      Instalování bez zavaděče

      -- cgit v1.2.1