Základní nastavení zaváděcího programu

Základní nastavení zaváděcího programu +

Zaváděcí program

+ + + + @@ -29,11 +33,19 @@ -

+ + + + + + + + +

Rozhraní zavaděče +

Grub2

@@ -41,145 +53,61 @@ -

Ve výchozím stavu Mageia používá výhradně:

- - -

Grub2 on Legacy MBR/GPT systems

-
Grub2 (with or without graphical menu) for a Legacy/MBR or Legacy/GPT system
+
GRUB2 (with or without graphical menu) will be used exclusively as the + bootloader for a Legacy/MBR or Legacy/GPT system. +
-
Grub2-efi pro UEFI systémy.
+
By default, a new bootloader will be written into either the MBR (Master + Boot Record) of your first hard drive or in the BIOS boot partition. +

- - - - - - - - -


	- - Grafické nabídky Mageii jsou pěkné: - -

- - -

Grub2 on Legacy/MBR and Legacy/GPT systems -

- - - - - -

Neupravujte "Zaváděcí zařízení", pokud s jistotou nevíte, co děláte.

- -

- - -

Grub2-efi na UEFI systémech -

- - - -

Se systémem UEFI je uživatelské rozhraní trochu odlišné, protože si nemůžete - volit postup s nebo bez grafické nabídky -

- - - - -

Pokud je Mageia jediným systémem nainstalovaným na váš počítač, instalátor - vytvořil ESP (systémový oddíl EFI) pro zapsání zavaděče (Grub2-efi). Pokud - ve vašem počítači byly už předtím nainstalovány operační systémy UEFI - (například Windows 8), instalátor Mageii zjistil stávající ESP vytvořený - operačním systémem Windows a přidal grub2-efi. Ačkoli je možno mít více - oddílů ESP, radí se mít a stačí jen jeden, bez ohledu na počet operačních - systémů, které máte v počítači. -

- - -

Neupravujte "Zaváděcí zařízení", pokud s jistotou nevíte, co děláte.

- -

- - -

Použití zavaděče Mageii -

- - - -

By default, according to your system, Mageia writes a new:

- - -

Grub2-efi na UEFI systémech

-
GRUB2 bootloader either into the MBR (Master Boot Record) of your first hard - drive or in the BIOS boot partition. -
+
GRUB2-efi will be used exclusively as the bootloader for a UEFI system.
-
Grub2-efi zavaděč do ESP
+
By default, a new bootloader (Grub2-efi) will be written into the ESP (EFI + System Partition). +
+ + +
If there are already UEFI-based operating systems installed on your computer + (Windows 8 for example), the Mageia installer will detect the existing ESP + created by Windows and add grub2-efi to it. If no ESP exists, then one will + be created. Although it is possible to have several ESPs, only one is + required, whatever the number of operating systems you have. +

- - -

If you already have other operating systems installed, Mageia attempts to - add them to your new Mageia boot menu. If you don't want this behaviour, - click on Next and then uncheck the box - Probe Foreign OS

- -

Použití už existujícího zavaděče +

Bootloader Setup

@@ -187,63 +115,11 @@ -

Přesný postup pro přidání vašeho systému Mageia k existujícímu zavaděči - přesahuje oblast této nápovědy, avšak ve většině případů bude zahrnovat - spuštění příslušného programu na instalaci zavaděče, který by ho měl - rozpoznat a přidat automaticky. Podívejte se na dokumentaci k operačnímu - systému, o nějž jde. -

- -

- - -

Using chain loading -

- - - -

If you don't want a bootable Mageia, but to chain load it from another OS, - click on Next, then on - Advanced and Check the box Do not touch ESP - or MBR. -

- - - - -

You will get a warning that the bootloader is missing, ignore it by clicking - OK. -

- - - -

- - -

Volby -

- - - -

První strana +

Základní nastavení zaváděcího programu

@@ -251,82 +127,121 @@ + +

- -
Delay before booting the default image: This text box - lets you set a delay in seconds before the default operating system is - started up. + +
Bootloader to use
+ + +
This feature is only available to Legacy MBR/BIOS systems. Users of UEFI + systems will not see this option here.
+ +
+ +
Boot device
+ +
Don't change this unless you really know what you are doing
+
- -
Security: This allows you to set a password for the - bootloader. This means other people can not enter single user mode or change - settings at the boot time. + +
Delay before booting the default image
+ + +
This text box lets you set a delay, in seconds, before the default operating + system is started up.
+ +
+
Security
+ + +
This allows you to set a password for the bootloader. This means a username + and password will be required when booting in order to select a booting + entry or change settings. This is optional, and most people are not likely + to have a need for it. The username is root and the + password is the one chosen hereafter. +
+
- -
Password: This text box is where you actually put the - password + +
Heslo
+ + +
Choose a password for the bootloader (optional)
+ +
+ +
Password (again)
+ + +
Retype the password and DrakX will check that it matches with the one set + above
+ +

+ + +

Advanced

+ + +

+ +
Enable ACPI
+ +
ACPI (Advanced Configuration and Power Interface) is a standard for power + management. It can save energy by stopping unused devices. Deselecting it + could be useful if, for example, your computer does not support ACPI or if + you think the ACPI implementation might cause some problems (for instance + random reboots or system lockups). +
+
- -
Heslo (znovu): Znovu zadejte heslo a drakx zkontroluje, - zda odpovídá heslu zadanému výše. + +
Enable SMP
+ + +
This option enables/disables symmetric multiprocessing for multi-core + processors
+ +
+ +
Enable APIC
+ +
Enabling this gives the operating system access to the Advanced Programmable + Interrupt Controller. APIC devices permit more complex priority models, and + Advanced IRQ (Interrupt Request) management. +
+
- -
Pokročilé
+ +
Enable Local APIC
- -
-
- - -
  Enable ACPI: ACPI (Advanced Configuration and Power - Interface) is a standard for the power management. It can save energy by - stopping unused devices, this was the method used before APM. Unchecking it - could be useful if, for example, your computer does not support ACPI or if - you think the ACPI implementation might cause some problems (for instance - random reboots or system lockups). -
  - -
- - -
  Enable SMP: This option enables / disables symmetric - multiprocessing for multi core processors. -
  - -
- - -
  Enable APIC: Enabling or disabling this gives the - operating system access to the Advanced Programmable Interrupt - Controller. APIC devices permit more complex priority models, and Advanced - IRQ (Interrupt Request) management. -
  - -
- - -
  Enable Local APIC: Here you can set local APIC, which - manages all external interrupts for a specific processor in an SMP system. -
  - -
-
+
Here you can set Local APIC, which manages all external interrupts for a + specific processor in an SMP system +
+

@@ -334,11 +249,11 @@

Další strana +

Nastavení zaváděcího programu

@@ -346,52 +261,175 @@ + +

-
Default: Operating system started up by default +
Default
+ + +
The operating system to be started up by default.
+ +
+ +
Append
+ + +
This option lets you pass information to the kernel or tell the kernel to + give you more information as it boots.
-
Append: This option lets you pass the kernel - information or tell the kernel to give you more information as it boots. +
Probe foreign OS
+ + +
If you already have other operating systems installed, Mageia attempts to + add them to your new Mageia boot menu. If you don't want this behaviour, + then untick the Probe Foreign OS option.

+ + +

Advanced

+ + + + +

-
Probe foreign OS: see above Using a Mageia bootloader
+
Video mode
+ + +
This sets the screen size and colour depth to be used by the boot menu. If + you click the down-triangle you will be offered other size and colour depth + options. +
-
Pokročilé
-
-
- - -
  Video mode: This sets the screen size and colour depth - the boot menu will use. If you click the down triangle you will be offered - other size and colour depth options. -
  - -
- - -
  Do not touch ESP or MBR: see above Using the chain loading
  - -
-
+
Do not touch ESP or MBR
+ + +
Select this option if you don't want a bootable Mageia, but would rather + chain-load it from another OS. You will get a warning that the bootloader is + missing. Click Ok if you are sure you understand the + implications, and wish to proceed. +

+ + + +

+ +

+ + +

Další volby +

+ + + +

Použití už existujícího zavaděče +

+ + + +

The exact procedure for adding Mageia to an existing bootloader is beyond + the scope of this documentation. However in most cases it will involve + running the relevant bootloader installation program, which should detect + Mageia and automatically add an entry for it in the bootloader menu. See the + documentation for the relevant operating system. +

+ + +

Installing Without a Bootloader +

+ + + +

While you can opt to install Mageia without a bootloader (see section 2.1 + Advanced), this is not recommended unless you absolutely know what you are + doing, as without some form of bootloader your operating system will be + unable to start. +

+ +

+ + +

Přidaní nebo změna položky v nabídce zavaděče +

+ + + + + +

To do this you need to manually edit /boot/grub2/custom.cfg or use the + software grub-customizer tool instead + (available in the Mageia repositories). +

+ + +

+ + + + + + + + +


	+ + Pro více informací navštivte: https://wiki.mageia.org/en/Grub2-efi_and_Mageia + +

+ +

-- cgit v1.2.1