From 9606ddfee543795d8208e2df7edb8a58b2f262c5 Mon Sep 17 00:00:00 2001 From: Papoteur Date: Tue, 6 Jun 2017 07:54:40 +0200 Subject: Add Norwegian Bokmal files --- nb/Select-and-use-ISOs.html | 765 ++++++++++++++++++++++++++++++++++++++++ nb/acceptLicense.html | 109 ++++++ nb/addUser.html | 232 ++++++++++++ nb/add_supplemental_media.html | 90 +++++ nb/ask_mntpoint_s.html | 131 +++++++ nb/chooseDesktop.html | 56 +++ nb/choosePackageGroups.html | 73 ++++ nb/choosePackagesTree.html | 47 +++ nb/configureServices.html | 61 ++++ nb/configureTimezoneUTC.html | 64 ++++ nb/configureX_card_list.html | 96 +++++ nb/configureX_chooser.html | 113 ++++++ nb/configureX_monitor.html | 128 +++++++ nb/diskdrake.html | 126 +++++++ nb/doPartitionDisks.html | 284 +++++++++++++++ nb/draft.png | Bin 0 -> 16150 bytes nb/exitInstall.html | 57 +++ nb/formatPartitions.html | 81 +++++ nb/index.html | 223 ++++++++++++ nb/installUpdates.html | 53 +++ nb/installer.html | 417 ++++++++++++++++++++++ nb/media_selection.html | 76 ++++ nb/minimal-install.html | 68 ++++ nb/misc-params.html | 388 ++++++++++++++++++++ nb/note.png | Bin 0 -> 2742 bytes nb/securityLevel.html | 49 +++ nb/selectCountry.html | 109 ++++++ nb/selectInstallClass.html | 136 +++++++ nb/selectKeyboard.html | 93 +++++ nb/selectLanguage.html | 105 ++++++ nb/selectMouse.html | 54 +++ nb/setupBootloader.html | 402 +++++++++++++++++++++ nb/setupBootloaderAddEntry.html | 53 +++ nb/setupSCSI.html | 57 +++ nb/soundConfig.html | 79 +++++ nb/takeOverHdConfirm.html | 50 +++ nb/tip.png | Bin 0 -> 2925 bytes nb/uninstall-Mageia.html | 80 +++++ nb/warning.png | Bin 0 -> 3780 bytes 39 files changed, 5005 insertions(+) create mode 100644 nb/Select-and-use-ISOs.html create mode 100644 nb/acceptLicense.html create mode 100644 nb/addUser.html create mode 100644 nb/add_supplemental_media.html create mode 100644 nb/ask_mntpoint_s.html create mode 100644 nb/chooseDesktop.html create mode 100644 nb/choosePackageGroups.html create mode 100644 nb/choosePackagesTree.html create mode 100644 nb/configureServices.html create mode 100644 nb/configureTimezoneUTC.html create mode 100644 nb/configureX_card_list.html create mode 100644 nb/configureX_chooser.html create mode 100644 nb/configureX_monitor.html create mode 100644 nb/diskdrake.html create mode 100644 nb/doPartitionDisks.html create mode 100644 nb/draft.png create mode 100644 nb/exitInstall.html create mode 100644 nb/formatPartitions.html create mode 100644 nb/index.html create mode 100644 nb/installUpdates.html create mode 100644 nb/installer.html create mode 100644 nb/media_selection.html create mode 100644 nb/minimal-install.html create mode 100644 nb/misc-params.html create mode 100644 nb/note.png create mode 100644 nb/securityLevel.html create mode 100644 nb/selectCountry.html create mode 100644 nb/selectInstallClass.html create mode 100644 nb/selectKeyboard.html create mode 100644 nb/selectLanguage.html create mode 100644 nb/selectMouse.html create mode 100644 nb/setupBootloader.html create mode 100644 nb/setupBootloaderAddEntry.html create mode 100644 nb/setupSCSI.html create mode 100644 nb/soundConfig.html create mode 100644 nb/takeOverHdConfirm.html create mode 100644 nb/tip.png create mode 100644 nb/uninstall-Mageia.html create mode 100644 nb/warning.png diff --git a/nb/Select-and-use-ISOs.html b/nb/Select-and-use-ISOs.html new file mode 100644 index 0000000..877a656 --- /dev/null +++ b/nb/Select-and-use-ISOs.html @@ -0,0 +1,765 @@ + + + + + Velg og bruk ISOer + + + + + + +
+
+
+
+

Velg og bruk ISOer +

+
+
+
+ + + +
+
+
+
+

Introduksjon +

+
+
+
+ + +

Mageia distribuers som ISO bilder. Denne siden vil hjelpe deg til å velge + hvilket bilde som passer dine behov. +

+ +

Det er to typer media:

+ +
+
    +
  • + +

    Classical installer: After booting the media, it will follow a process + allowing to choose what to install and how to configure your target + system. This give you the maximal flexibility for a customized installation, + in particular to choose which Desktop Environment you will install. +

    + +
  • +
  • + +

    LIVE media: you can boot the media in a real Mageia system without + installing it, to see what you will get after installation. The + installation process is simpler, but you get lesser choices. +

    + +
  • +
+
+ +

Details are given in the next sections.

+ +
+ +
+
+
+
+

Media +

+
+
+
+ + +
+
+
+
+

Definisjon +

+
+
+
+ + +

Here, a medium (plural: media) is an ISO image file that allows you to + install and/or update Mageia and by extension any physical support the ISO + file is copied to. +

+ +

Du kan finne dem her. +

+ +
+ +
+
+
+
+

Klassisk installasjonsmedia +

+
+
+
+ + +
+
+
+
+
Felles egenskaper +
+
+
+
+ + +
+
    +
  • + +

    Disse ISOene bruker den tradisjonelle installereren, DrakX.

    + +
  • +
  • + +

    De kan enten gjøre en ren installasjon eller oppgrader fra en tidligere + versjon. +

    + +
  • +
+
+ +
+ +
+
+
+
+
DVD +
+
+
+
+ + +
+
    +
  • + +

    Forskjellige media for 32 eller 64 biters arkitektur.

    + +
  • +
  • + +

    Some tools are available in the Welcome screen: Rescue System, Memory Test, + Hardware Detection Tool. +

    + +
  • +
  • + +

    Each DVD contains many available desktop environments and languages.

    + +
  • +
  • + +

    You'll be given the choice during the installation to add non free software.

    + +
  • +
+
+ +
+ +
+ +
+
+
+
+

Live media +

+
+
+
+ + +
+
+
+
+
Felles egenskaper +
+
+
+
+ + +
+
    +
  • + +

    Can be used to preview the distribution without installing it on a HDD, and + optionally install Mageia on to your HDD. +

    + +
  • +
  • + +

    Each ISO contains only one desktop environment (KDE, GNOME or Xfce).

    + +
  • +
  • + +

    Forskjellige media for 32 eller 64 biters arkitektur.

    + +
  • +
  • + +

    Live ISOs can only be used to create clean + installations, they cannot be used to upgrade from previous + releases.

    + +
  • +
  • + +

    They contain non free software.

    + +
  • +
+
+ +
+ +
+
+
+
+
Live DVD Plasma +
+
+
+
+ + +
+
    +
  • + +

    Kun Plasma desktop.

    + +
  • +
  • + +

    Alle språk er tilgjengelige

    + +
  • +
  • + +

    Forskjellige media for 32 eller 64 biters arkitektur.

    + +
  • +
+
+ +
+ +
+
+
+
+
Live DVD GNOME +
+
+
+
+ + +
+
    +
  • + +

    Kun GNOME desktop.

    + +
  • +
  • + +

    Alle språk er tilgjengelige

    + +
  • +
  • + +

    Forskjellige media for 32 eller 64 biters arkitektur.

    + +
  • +
+
+ +
+ +
+
+
+
+
Live DVD Xfce +
+
+
+
+ + +
+
    +
  • + +

    Kun Xfce desktop.

    + +
  • +
  • + +

    Alle språk er tilgjengelige

    + +
  • +
  • + +

    Forskjellige media for 32 eller 64 biters arkitektur.

    + +
  • +
+
+ +
+ +
+ +
+
+
+
+

Kun oppstarts CD media +

+
+
+
+ + +
+
+
+
+
Felles egenskaper +
+
+
+
+ + +
+
    +
  • + +

    Each one is a small image that contains no more than that which is needed to + start the drakx installer and find drakx-installer-stage2 and other packages + that are needed to continue and complete the install. These packages may be + on the PC hard disk, on a local drive, on a local network or on the + Internet. +

    + +
  • +
  • + +

    These media are very light (less than 100 MB) and are convenient when + bandwidth is too low to download a full DVD, a PC without a DVD drive or a + PC that can't boot from a USB stick. +

    + +
  • +
  • + +

    Forskjellige media for 32 eller 64 biters arkitektur.

    + +
  • +
  • + +

    Kun Engelsk.

    + +
  • +
+
+ +
+ +
+
+
+
+
netinstall.iso +
+
+
+
+ + +
+
    +
  • + +

    Inneholder bare fri programvare for de som nekter å bruke ikke-fri + programvare. +

    + +
  • +
+
+ +
+ +
+
+
+
+
netinstall-nonfree.iso +
+
+
+
+ + +
+
    +
  • + +

    Inneholder ikke-fri programvare (mest drivere og multimedia kodeks) for de + som trenger det. +

    + +
  • +
+
+ +
+ +
+ +
+ +
+
+
+
+

Laster ned og kontrollerer media. +

+
+
+
+ + +
+
+
+
+

Laster ned +

+
+
+
+ + +

Once you have chosen your ISO file, you can download it using either http or + BitTorrent. In both cases, a window gives you some information, such as the + mirror in use and the possibility to change if the bandwidth is to low. If + http is chosen, you may also see something like +

+ + +

md5sum and sha1sum are tools to check the ISO integrity. Use only one of + them. Keep one of them for further + usage. Then this window appears: +

+ + +

Klikk radioknappen Lagre Fil.

+ +
+ +
+
+
+
+

Kontrollerer integriteten til det nedlastede medium +

+
+
+
+ + +

Both checksums are hexadecimal numbers calculated by an algorithm from the + file to be downloaded. When you ask these algorithms to recalculate this + number from your downloaded file, either you have the same number and your + downloaded file is correct, or the number is different and you have a + failure. A failure infers that you should retry the download or attempt a + repair using BitTorrent. +

+ +

Åpne et konsollvindu, du trenger ikke være root og:

+ +

- For å bruke md5sum, type: [sam@localhost]$ md5sum + path/to/the/image/file.iso. +

+ +

- For å bruke sha1sum, type: [sam@localhost]$ sha1sum + path/to/the/image/file.iso. +

+ +

and compare the obtained number on your computer (you may have to wait for a + while) with the number given by Mageia. Example: +

+ + +

+ +
+ +
+ +
+
+
+
+

Brenn eller dump ISOen +

+
+
+
+ + +

The checked ISO can now be burned to a CD or DVD or dumped to a USB + stick. These operations are not a simple copy and aim to make a bootable + medium. +

+ +
+
+
+
+

Brenner ISO til en CD/DVD +

+
+
+
+ + +

Use whatever burner you wish but ensure the burning device is set correctly + to burn an image, burn data or files is not + correct. There is more information in the Mageia + wiki. +

+ +
+ +
+
+
+
+

Dumper ISOen til en USB disk +

+
+
+
+ + +

All Mageia ISOs are hybrids, which means you can 'dump' them to a USB stick + and then use it to boot and install the system. +

+ +
+ + + + + + + + +
[Advarsel]
+ +

"Dumping" an image onto a flash device destroys any previous file-system on + the device; any other data will be lost and the partition capacity will be + reduced to the image size. +

+ +
+
+ +

To recover the original capacity, you must redo partitioning and re-format + the USB stick. +

+ +
+
+
+
+
Bruker et grafisk verktøy inne i Mageia +
+
+
+
+ + +

Du kan bruke et grafisk verktøy som IsoDumper

+ +
+ +
+
+
+
+
Bruker et grafisk verktøy i Windows +
+
+
+
+ + +

Du kan prøve:

+ +

- Rufus bruke + "ISO bildet" alternativet; +

+ +

- Win32 + Disk Imager

+ +
+ +
+
+
+
+
Å bruke kommandolinje i et GNU/Linux system +
+
+
+
+ + +
+ + + + + + + + +
[Advarsel]
+ +

It is potentially *dangerous* to do this by hand. You risk to overwrite a + disc partition if you get the device-ID wrong. +

+ +
+
+ +

Du kan også bruke dd verktøyet i en konsoll:

+ +
+
    +
  1. + +

    Åpne et konsollsvindu

    + +
  2. +
  3. + +

    Bli root med kommandoen su - (ikke glem '-' på + slutten) +

    + + +
  4. +
  5. + +

    Plug in your USB stick (do not mount it, this also means do not open any + application or file manager that could access or read it) +

    + +
  6. +
  7. + +

    Skriv inn komandoen fdisk -l

    + + +

    Alternatively, you can get the device name with the command + dmesg: at end, you see the device name starting with + sd, and sdd in this case: +

    +
    [72594.604531] usb 1-1: new high-speed USB device number 27 using xhci_hcd
    +[72594.770528] usb 1-1: New USB device found, idVendor=8564, idProduct=1000
    +[72594.770533] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    +[72594.770536] usb 1-1: Product: Mass Storage Device
    +[72594.770537] usb 1-1: Manufacturer: JetFlash
    +[72594.770539] usb 1-1: SerialNumber: 18MJTWLMPUCC3SSB
    +[72594.770713] usb 1-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
    +[72594.770719] usb 1-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
    +[72594.771122] usb-storage 1-1:1.0: USB Mass Storage device detected
    +[72594.772447] scsi host8: usb-storage 1-1:1.0
    +[72595.963238] scsi 8:0:0:0: Direct-Access     JetFlash Transcend 2GB    1100 PQ: 0 ANSI: 4
    +[72595.963626] sd 8:0:0:0: [sdd] 4194304 512-byte logical blocks: (2.14 GB/2.00 GiB)
    +[72595.964104] sd 8:0:0:0: [sdd] Write Protect is off
    +[72595.964108] sd 8:0:0:0: [sdd] Mode Sense: 43 00 00 00
    +[72595.965025] sd 8:0:0:0: [sdd] No Caching mode page found
    +[72595.965031] sd 8:0:0:0: [sdd] Assuming drive cache: write through
    +[72595.967251]  sdd: sdd1
    +[72595.969446] sd 8:0:0:0: [sdd] Attached SCSI removable disk
    +
  8. +
  9. + +

    Find the device name for your USB stick (by its size), for example + /dev/sdb in the screenshot above, it is a 8GB USB stick. +

    + +
  10. +
  11. + +

    Skriv inn kommandoen: # dd if=path/to/the/ISO/file of=/dev/sdX + bs=1M

    + +

    Hvor X=enhetsnavnet feks: /dev/sdc

    + +

    Eksempel: # dd if=/home/user/Downloads/Mageia-4-x86_64-DVD.iso + of=/dev/sdb bs=1M

    + +
  12. +
  13. + +

    Skriv inn kommandoen: # sync

    + +
  14. +
  15. + +

    Ferdig, ta ut USB disken.

    + +
  16. +
+
+ +
+ +
+ +
+ +
+ + diff --git a/nb/acceptLicense.html b/nb/acceptLicense.html new file mode 100644 index 0000000..f6318db --- /dev/null +++ b/nb/acceptLicense.html @@ -0,0 +1,109 @@ + + + + + Lisens og utgivelsesmerknader + + + + + + +
+
+
+
+

Lisens og utgivelsesmerknader +

+
+
+
+ + + + + + + + + + + + + + + + + + + + + + + +
+
+
+
+

Lisensavtale +

+
+
+
+ + + +

Før installasjonen av Mageia vennligst les + grundig lisensvillkårene. +

+ + +

Disse villkårene gjelder for hele Mageia + distribusjonenog må aksepteres før du fortsetter. +

+ + +

For å akseptere, velg Aksepter og klikk på + Neste. +

+ + +

Hvis du velger å ikke akseptere villkårene, takker vi deg for å ha tatt en + kikk. Klikker du på Avslutt vil Pc'en din startes om. +

+ + + + +
+ + +
+
+
+
+

Utgivelsesmerknader +

+
+
+
+ + + + + + +

Important information are given about this release of + Mageia and are accessible clicking on the + Release Notes button. +

+ +
+ +
+ + diff --git a/nb/addUser.html b/nb/addUser.html new file mode 100644 index 0000000..54db748 --- /dev/null +++ b/nb/addUser.html @@ -0,0 +1,232 @@ + + + + + Administrasjon av Brukere og superbrukere + + + + + + +
+
+
+
+

Administrasjon av Brukere og superbrukere +

+
+
+
+ + + + +
+
+
+
+

Angi Adminstrasjons (root) Passord: +

+
+
+
+ + +

It is advisable for all Mageia installations to + set a superuser or administrator's password, usually called the + root password in Linux. As you type a password into the + top box the colour of its shield will change from red to yellow to green + depending on the strength of the password. A green shield shows you are + using a strong password. You need to repeat the same password in the box + just below the first password box, this checks that you have not mistyped + the first password by comparing them. +

+ +
+ + + + + + + + +
[Notat]
+ +

All passwords are case sensitive, it is best to use a mixture of letters + (upper and lower case), numbers and other characters in a password. +

+ +
+
+ +
+ +
+
+
+
+

Angi en bruker +

+
+
+
+ + +

Add a user here. A user has fewer rights than the superuser (root), but + enough to use the internet, office applications or play games and anything + else the average user does with his computer +

+ +
+
    +
  • + +

    Icon: if you click on this button it will change the + user's icon. +

    + +
  • +
  • + +

    Real Name: Insert the user's real name into this text + box. +

    + +
  • +
  • + +

    Login Name: Here you enter the user login name or let + drakx use a version of the user's real name. The login name is + case sensitive.

    + +
  • +
  • + +

    Password: In this text box you should type in the user + password. There is a shield at the end of the text box that indicates the + strength of the password. (See also Notat) +

    + +
  • +
  • + +

    Password (again): Retype the user password into this + text box and drakx will check you have the same password in each of the user + password text boxes. +

    + +
  • +
+
+ +
+ + + + + + + + +
[Notat]
+ +

Any user you add while installing Mageia, will have a both read and write + protected home directory (umask=0027). +

+ +

You can add all extra needed users in the Configuration - + Summary step during the install. Choose User + management. +

+ +

The access permissions can also be changed after the install.

+ +
+
+ +
+ +
+
+
+
+

Avansert brukeradministrasjon +

+
+
+
+ + +

If the advanced button is clicked you are offered a + screen that allows you to edit the settings for the user you are adding. +

+ +

Additionally, you can disable or enable a guest account.

+ +
+ + + + + + + + +
[Advarsel]
+ +

Anything a guest with a default rbash guest account + saves to his /home directory will be erased when he logs out. The guest + should save his important files to a USB key. +

+ +
+
+ +
+
    +
  • + +

    Enable guest account: Here you can enable or disable a + guest account. The guest account allows a guest to log into and use the PC, + but he has more restricted access than normal users. +

    + +
  • +
  • + +

    Shell: This drop down list allows you to change the + shell used by the user you are adding in the previous screen, options are + Bash, Dash and Sh +

    + +
  • +
  • + +

    User ID: Here you can set the user ID for the user you + are adding in the previous screen. This is a number. Leave it blank unless + you know what you are doing. +

    + +
  • +
  • + +

    Group ID: This lets you set the group ID. Also a + number, usually the same one as for the user. Leave it blank unless you know + what you are doing. +

    + +
  • +
+
+ +
+ +
+ + diff --git a/nb/add_supplemental_media.html b/nb/add_supplemental_media.html new file mode 100644 index 0000000..90f01ca --- /dev/null +++ b/nb/add_supplemental_media.html @@ -0,0 +1,90 @@ + + + + + Mediumvalg (sett opp supplerende installasjonsmedia) + + + + + + +
+
+
+
+

Mediumvalg (sett opp supplerende installasjonsmedia) +

+
+
+
+ + + + + + + + + +

This screen gives you the list of already recognized repositories. You can + add other sources for packages, like an optical disc or a remote source. The + source selection determines which packages will be available for selection + during the next steps. +

+ + +

For a network source, there are two steps to follow:

+ + +
+
    +
  1. + +

    Choosing and activation of the network, if not already up.

    + +
  2. +
  3. + +

    Selecting a mirror or specifying a URL (very first entry). By selecting a + mirror, you have access to the selection of all repositories managed by + Mageia, like the Nonfree , the Tainted repositories and the Updates. With + the URL, you can designate a specific repository or your own NFS + installation. +

    + +
  4. +
+
+ + +
+ + + + + + + + +
[Notat]
+ +

If you are updating a 64 bit installation which may contain some 32 bit + packages, it is advised to use this screen to add an online mirror by + ticking one of the Network protocols here. The 64 bit DVD iso only contains + 64 bit and noarch packages, it will not be able to update the 32 bit + packages. However, after adding an online mirror, installer will find the + needed 32 bit packages there. +

+ +
+
+ + +
+ + diff --git a/nb/ask_mntpoint_s.html b/nb/ask_mntpoint_s.html new file mode 100644 index 0000000..2a8916f --- /dev/null +++ b/nb/ask_mntpoint_s.html @@ -0,0 +1,131 @@ + + + + + Velg monteringspunktene + + + + + + +
+
+
+
+

Velg monteringspunktene +

+
+
+
+ + + + + + + + + + + + + + + + +

Here you see the Linux partitions that have been found on your computer. If + you don't agree with the DrakX suggestions, you + can change the mount points. +

+ + +
+ + + + + + + + +
[Notat]
+ +

If you change anything, make sure you still have a / + (root) partition. +

+ +
+
+ + +
+
    +
  • + +

    Alle partisjoner vises slik: "Enhet" ("Kapasitet", "Monteringspunkt", + "Type"). +

    + +
  • +
  • + +

    "Device", is made up of: "hard drive", ["hard drive number"(letter)], + "partition number" (for example, "sda5"). +

    + +
  • +
  • + +

    If you have many partitions, you can choose many different mount points from + the drop down menu, such as /, /home + and /var. You can even make your own mount points, for + instance /video for a partition where you want to store + your films, or /cauldron-home for the + /home partition of a cauldron install. +

    + +
  • +
  • + +

    For partitions you don't need to have access to, you can leave the mount + point field blank. +

    + +
  • +
+
+ + +
+ + + + + + + + +
[Advarsel]
+ +

Choose Previous if you are not sure what to choose, + and then tick Custom disk partitioning. In the screen + that follows, you can click on a partition to see its type and size. +

+ +
+
+ + +

If you are sure the mount points are correct, click on + Next, and choose whether you only want to format the + partition(s) DrakX suggests, or more. +

+ +
+ + diff --git a/nb/chooseDesktop.html b/nb/chooseDesktop.html new file mode 100644 index 0000000..68bb1fe --- /dev/null +++ b/nb/chooseDesktop.html @@ -0,0 +1,56 @@ + + + + + Skrivebordsvalg + + + + + + +
+
+
+
+

Skrivebordsvalg +

+
+
+
+ + + + + + +

Depending on your selection here, you may be offered further screens to fine + tune your choice. +

+ + +

After the selection step(s), you will see a slide show during package + installation. The slide show can be disabled by pressing the + Details button +

+ + + + +

Velg om du foretrekker å bruke KDE eller + Gnome skrivebordsmiljø. Begge kommer med en + mengde anvendelige applikasjoner og verktøy. Klikk + Tilpasset Hvis du ikke vil bruke noen av de eller + begge, eller hvis du vil bruke annet enn standard programvare for + skrivebordsmiljøene. LXDE skrivebordsmiljøet er + lettere en de to andre, færre pakker installeres som standard og færre + skrivebordsefekter. +

+ +
+ + diff --git a/nb/choosePackageGroups.html b/nb/choosePackageGroups.html new file mode 100644 index 0000000..931f9ca --- /dev/null +++ b/nb/choosePackageGroups.html @@ -0,0 +1,73 @@ + + + + + Valg pakkegruppe + + + + + + +
+
+
+
+

Valg pakkegruppe +

+
+
+
+ + + + + + + +

Packages have been sorted into groups, to make choosing what you need on + your system a lot easier. The groups are fairly self explanatory, however + more information about the content of each is available in tool-tips which + become visible as the mouse is hovered over them. +

+ + +
+
    +
  • + +

    Arbeidsstasjon

    + +
  • +
  • + +

    Tjener

    + +
  • +
  • + +

    Grafisk miljø

    + +
  • +
  • + +

    Individuelt pakkevalg. Du kan bruke dette alternativet for manuelt å legge + till eller fjerne pakker. +

    + +
  • +
+
+ + +

Read “Minimal Installasjon” for instructions on how to do a + minimal install (without or with X & IceWM). +

+ +
+ + diff --git a/nb/choosePackagesTree.html b/nb/choosePackagesTree.html new file mode 100644 index 0000000..bdfa76c --- /dev/null +++ b/nb/choosePackagesTree.html @@ -0,0 +1,47 @@ + + + + + Individuelt pakkevalg + + + + + + +
+
+
+
+

Individuelt pakkevalg +

+
+
+
+ + + + + + + + +

Her kan du legge til eller fjerne tilleggspakker for å tilpasse + installasjonen din. +

+ + +

After having made your choice, you can click on the floppy + icon at the bottom of the page to save your choice of packages + (saving to a USB key works, too). You can then use this file to install the + same packages on another system, by pressing the same button during install + and choosing to load it. +

+ +
+ + diff --git a/nb/configureServices.html b/nb/configureServices.html new file mode 100644 index 0000000..4431642 --- /dev/null +++ b/nb/configureServices.html @@ -0,0 +1,61 @@ + + + + + Konfigurer dine tjenester + + + + + + +
+
+
+
+

Konfigurer dine tjenester +

+
+
+
+ + + + + + + + + + + + +

Here you can set which services should (not) start when you boot your + system. +

+ + +

There are four groups, click on the triangle before a group to expand it and + see all services in it. +

+ + +

Paramtrene som DrakX velger er som regel gode. +

+ + +

If you highlight a service, some information about it is shown in the info + box below. +

+ + +

Only change things when you know very well what you are doing. +

+ +
+ + diff --git a/nb/configureTimezoneUTC.html b/nb/configureTimezoneUTC.html new file mode 100644 index 0000000..69afb79 --- /dev/null +++ b/nb/configureTimezoneUTC.html @@ -0,0 +1,64 @@ + + + + + Sett opp tidssonen din + + + + + + +
+
+
+
+

Sett opp tidssonen din +

+
+
+
+ + + + + + + + + +

Choose your time zone by choosing your country or a city close to you in the + same time zone. +

+ + +

In next screen you can choose to set your hardware clock to local time or to + GMT, also known as UTC. +

+ + +
+ + + + + + + + +
[Notat]
+ +

If you have more than one operating system on your computer, make sure they + are all set to local time, or all to UTC/GMT. +

+ +
+
+ +
+ + diff --git a/nb/configureX_card_list.html b/nb/configureX_card_list.html new file mode 100644 index 0000000..3345d90 --- /dev/null +++ b/nb/configureX_card_list.html @@ -0,0 +1,96 @@ + + + + + Choose an X Server (Configure your Graphic Card) + + + + + + +
+
+
+
+

Choose an X Server (Configure your Graphic Card) +

+
+
+
+ + + + + + + + + + + + + +

DrakX has a very comprehensive database of video cards and will usually + correctly identify your video device. +

+ + +

If the installer has not correctly detected your graphic card and you know + which one you have, you can select it from the tree by: +

+
+
    +
  • + +

    Leverandør

    + +
  • +
  • + +

    angi så navnet på kortet ditt

    + +
  • +
  • + +

    og korttypen

    + +
  • +
+
+ + +

If you cannot find your card in the vendor lists (because it's not yet in + the database or it's an older card) you may find a suitable driver in the + Xorg category +

+ + +

The Xorg listing provides more than 40 generic and open source video card + drivers. If you still can't find a named driver for your card there is the + option of using the vesa driver which provides basic capabilities. +

+ + +

Be aware that if you select an incompatible driver you may only have access + to the Commandline Interface. +

+ + +

Some video card manufacturers provide proprietary drivers for Linux which + may only be available in the Nonfree repository and in some cases only from + the card manufacturers' websites. +

+ + +

The Nonfree repository needs to be explicitly enabled to access them. If + you didn't select it previously, you should do this after your first reboot. +

+ +
+ + diff --git a/nb/configureX_chooser.html b/nb/configureX_chooser.html new file mode 100644 index 0000000..42178b9 --- /dev/null +++ b/nb/configureX_chooser.html @@ -0,0 +1,113 @@ + + + + + Graphic Card and Monitor Configuration + + + + + + +
+
+
+
+

Graphic Card and Monitor Configuration +

+
+
+
+ + + + + + + + +

No matter which graphical environment (also known as desktop environment) + you chose for this install of Mageia, they are + all based on a graphical user interface system called X Window + System, or simply X. So in order for + KDE, Gnome, LXDE or + any other graphical environment to work well, the following + X settings need to be correct. Choose the correct + settings if you can see that DrakX didn't make a + choice, or if you think the choice is incorrect. +

+ + +
+
    +
  • + +

    Graphic card: Choose your card + from the list if needed. +

    + +
  • +
  • + +

    Monitor: You can choose + Plug'n Play when applicable, or choose your monitor + from the Vendor or Generic + list. Choose Custom if you prefer to manually set the + horizontal and vertical refresh rates of your monitor. +

    + + +
    + + + + + + + + +
    [Advarsel]
    + +

    Incorrect refresh rates may damage your monitor +

    + +
    +
    + +
  • +
  • + +

    Resolution: Set the desired + resolution and color depth of your monitor here. +

    + +
  • +
  • + +

    Test: The test button does not + always appear during install. If the button is there, you can control your + settings by pressing it. If you see a question asking you whether your + settings are correct, you can answer "yes", and the settings will be + kept. If you don't see anything, you'll return to the configuration screen + and be able to reconfigure everything until the test is good. Make + sure your settings are on the safe side if the test button isn't + available

    + +
  • +
  • + +

    Options: Here you can choose to + enable or disable various options. +

    + +
  • +
+
+ +
+ + diff --git a/nb/configureX_monitor.html b/nb/configureX_monitor.html new file mode 100644 index 0000000..f0f297a --- /dev/null +++ b/nb/configureX_monitor.html @@ -0,0 +1,128 @@ + + + + + Velg en monitor + + + + + + +
+
+
+
+

Velg en monitor +

+
+
+
+ + + + + + + + + + + +

DrakX has a very comprehensive database of monitors and will usually + correctly identify yours. +

+ + +
+ + + + + + + + +
[Advarsel]
+ +

Selecting a monitor with different characteristics could damage + your monitor or video hardware. Please don't try something without knowing + what you are doing. If in doubt you should consult your monitor + documentation +

+ +
+
+ + + + +

Custom

+ + +

This option allows you to set two critical parameters, the vertical refresh + rate and the horizontal sync rate. Vertical refresh determines how often the + screen is refreshed and horizontal sync is the rate at which scan lines are + displayed. +

+ + +

It is VERY IMPORTANT that you do not specify a monitor + type with a sync range that is beyond the capabilities of your monitor: you + may damage your monitor. If in doubt, choose a conservative setting and + consult your monitor documentation. +

+ + +

Plug 'n Play

+ + +

This is the default option and tries to determine the monitor type from the + monitor database. +

+ + +

Leverandør

+ + +

If the installer has not correctly detected your monitor and you know which + one you have, you can select it from the tree by selecting: +

+
+
    +
  • + +

    Leverandør

    + +
  • +
  • + +

    skjermens produsent

    + +
  • +
  • + +

    skjermbeskrivelse

    + +
  • +
+
+ + +

Generisk

+ + +

selecting this group displays nearly 30 display configurations such as + 1024x768 @ 60Hz and includes Flat panel displays as used in laptops. This is + often a good monitor selection group if you need to use the Vesa card driver + when your video hardware cannot be determined automatically. Once again it + may be wise to be conservative in your selections. +

+ +
+ + diff --git a/nb/diskdrake.html b/nb/diskdrake.html new file mode 100644 index 0000000..6561e4c --- /dev/null +++ b/nb/diskdrake.html @@ -0,0 +1,126 @@ + + + + + Egendefinert partisjonering med DiskDrake + + + + + + +
+
+
+
+

Egendefinert partisjonering med DiskDrake +

+
+
+
+ + + + + + + +
+ + + + + + + + +
[Advarsel]
+ +

If you wish to use encryption on your / partition you + must ensure that you have a separate /boot partition. The + encryption option for the /boot partition must NOT be + set, otherwise your system will be unbootable. +

+ +
+
+ + +

Adjust the layout of your disk(s) here. You can remove or create + partitions, change the filesystem of a partition or change its size and even + view what is in them before you start. +

+ + +

There is a tab for every detected hard disk or other storage device, like an + USB key. For example sda, sdb and sdc if there are three of them. +

+ + +

Push Clear all to wipe all partitions on the selected + storage device +

+ + +

For all other actions: click on the desired partition first. Then view it, + or choose a filesystem and a mount point, resize it or wipe it. +

+ + +

Continue until you adjusted everything to your wishes. +

+ + +

Click Done when you're ready. +

+ + +
+ + + + + + + + +
[Notat]
+ +

If you are installing Mageia on an UEFI system, check that an ESP (EFI + System Partition) is present and correctly mounted on /boot/EFI (see below) +

+ + +

+ +
+
+ + +
+ + + + + + + + +
[Notat]
+ +

If you are installing Mageia on a Legacy/GPT system, check that a BIOS boot + partition is present with a correct type +

+ + + +
+
+ +
+ + diff --git a/nb/doPartitionDisks.html b/nb/doPartitionDisks.html new file mode 100644 index 0000000..39b23cc --- /dev/null +++ b/nb/doPartitionDisks.html @@ -0,0 +1,284 @@ + + + + + Partisjonering + + + + + + +
+
+
+
+

Partisjonering +

+
+
+
+ + + + + + + +

In this screen you can see the content of your hard drive(s) and see the + solutions the DrakX partitioning wizard found for where to install + Mageia. +

+ + +

The options available from the list below will vary depending on your + particular hard drive(s) layout and content. +

+ + + + +

+
+
    +
  • + +

    Bruk gamle partisjoner +

    + + +

    If this option is available, then existing Linux compatible partitions have + been found and may be used for the installation. +

    + +
  • +
  • + +

    Bruk ledig plass +

    + + +

    If you have unused space on your hard drive then this option will use it for + your new Mageia installation. +

    + +
  • +
  • + +

    Bruk ledig plass på Microsoft Windows®-partisjonen +

    + + +

    If you have unused space on an existing Windows partition, the installer may + offer to use it. +

    + + +

    This can be a useful way of making room for your new Mageia installation, + but is a risky operation so you should make sure you have backed up all + important files! +

    + + +

    Note that this involves shrinking the size of the Windows partition. The + partition must be "clean", meaning that Windows must have closed down + correctly the last time it was used. It must also have been defragmented, + although this is not a guarantee that all files in the partition have been + moved out of the area that is about to be used. It is highly recommended to + back up your personal files. +

    + + +

    With this option, the installer displays the remaining Windows partition in + light blue and the future Mageia partition in dark blue with their intended + sizes just under. You have the possibility to adapt these sizes by clicking + and dragging the gap between both partitions. See the screen-shot below. +

    + + + +
  • +
+
+

+
+
    +
  • + +

    Slett og bruk hele disken +

    + + +

    Dette alternativet vil bruke hele disken for Mageia +

    + + +

    Note! This will erase ALL data on the selected hard drive. Take care! +

    + + +

    If you intend to use part of the disk for something else, or you already + have data on the drive that you are not prepared to lose, then do not use + this option. +

    + +
  • +
+
+
+
    +
  • + +

    Selvvalgt +

    + + +

    This gives you complete control over the placing of the installation on your + hard drive(s). +

    + +
  • +
+
+ + +

Sett opp partisjonsstørrelser:

+ + +

The installer will share the available place out according to the following + rules: +

+ + +
+
    +
  • + +

    If the total available place is lower than 50 GB, only one partition is + created for /, there is no separate partition for /home. +

    + +
  • +
  • + +

    If the total available place is over 50 GB, then three partitions are + created +

    + + +
    +
      +
    • + +

      6/19 of the total available place is allocated to / with a maximum of 50 GB

      + +
    • +
    • + +

      1/19 is allocated to swap with a maximum of 4 GB

      + +
    • +
    • + +

      the rest (at least 12/19) is allocated to /home

      + +
    • +
    +
    + +
  • +
+
+ + +

That means that from 160 GB and over of available place, the installer will + create three partitions: 50 GB for /, 4 GB for swap and the rest for /home. +

+ + +
+ + + + + + + + +
[Notat]
+ +

If you are using an UEFI system, the ESP (EFI System Partition) will be + automatically detected, or created if it does not exist yet, and mounted on + /boot/EFI. The "Custom" option is the only one that allows to check it has + been correctly done +

+ +
+
+ + +
+ + + + + + + + +
[Notat]
+ +

If you are using a Legacy (as known as CSM or BIOS) system with a GPT disk, + you need to create a Bios boot partition if not already existing. It is an + about 1 MiB partition with no mount point. Choose the "Custom disk + partitioning" option to be able to create it with the Installer like any + other partition, just select BIOS boot partition as filesystem type. +

+ + + + + +
+
+ + +
+ + + + + + + + +
[Advarsel]
+ +

Some newer drives are now using 4096 byte logical sectors, instead of the + previous standard of 512 byte logical sectors. Due to lack of available + hardware, the partitioning tool used in the installer has not been tested + with such a drive. Also some ssd drives now use an erase block size over 1 + MB. We suggest to pre-partition the drive, using an alternative partitioning + tool like gparted, if you own such a device, and to use the following + settings: +

+ + +

"Align to" "MiB"

+ + +

"Free space preceding (MiB)" "2"

+ + +

Also make sure all partitions are created with an even number of megabytes.

+ +
+
+ +
+ + diff --git a/nb/draft.png b/nb/draft.png new file mode 100644 index 0000000..59673fe Binary files /dev/null and b/nb/draft.png differ diff --git a/nb/exitInstall.html b/nb/exitInstall.html new file mode 100644 index 0000000..c4bfbbd --- /dev/null +++ b/nb/exitInstall.html @@ -0,0 +1,57 @@ + + + + + Gratulerer + + + + + + +
+
+
+
+

Gratulerer +

+
+
+
+ + + + + + + +

You have finished installing and configuring + Mageia and it is now safe to remove the + installation medium and reboot your computer. +

+ + +

After reboot, in the bootloader screen, you can choose between the operating + systems on your computer (if you have more than one). +

+ + +

If you didn't adjust the settings for the bootloader, your Mageia install + will be automatically selected and started. +

+ + +

Enjoy! +

+ + +

Gå til www.mageia.org hvs du har spørsmål eller vil bidra til Mageia +

+ +
+ + diff --git a/nb/formatPartitions.html b/nb/formatPartitions.html new file mode 100644 index 0000000..f173dda --- /dev/null +++ b/nb/formatPartitions.html @@ -0,0 +1,81 @@ + + + + + Formater + + + + + + +
+
+
+
+

Formater +

+
+
+
+ + + + + + + + + + + + + + + + +

Here you can choose which partition(s) you wish to format. Any data on + partitions not marked for formatting will be saved. +

+ + +

Usually at least the partitions DrakX selected, need to be formatted +

+ + +

Click on Advanced to choose partitions you want to + check for so called bad blocks

+ + +
+ + + + + + + + +
[Tips]
+ +

If you're not sure you have made the right choice, you can click on + Previous, again on Previous + and then on Custom to get back to the main screen. + In that screen you can choose to view what is in your partitions. +

+ +
+
+ + +

When you are confident about the selection, click on + Next to continue. +

+ +
+ + diff --git a/nb/index.html b/nb/index.html new file mode 100644 index 0000000..96d56a1 --- /dev/null +++ b/nb/index.html @@ -0,0 +1,223 @@ + + + + + Installasjon med DrakX + + + + +
+
+
+
+

Installasjon med DrakX +

+
+
+
+
+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
+ + diff --git a/nb/installUpdates.html b/nb/installUpdates.html new file mode 100644 index 0000000..732f1e2 --- /dev/null +++ b/nb/installUpdates.html @@ -0,0 +1,53 @@ + + + + + Oppdateringer + + + + + + +
+
+
+
+

Oppdateringer +

+
+
+
+ + + + + + + + + + + +

Since this version of Mageia was released, some + packages will have been updated or improved. +

+ + +

Choose yes if you wish to download and install them, + select no if you don't want to do this now, or if you + aren't connected to the Internet +

+ + +

Then press Next to continue +

+ + +
+ + diff --git a/nb/installer.html b/nb/installer.html new file mode 100644 index 0000000..4af5266 --- /dev/null +++ b/nb/installer.html @@ -0,0 +1,417 @@ + + + + + DrakX er Mageia installereren + + + + + + +
+
+
+
+

DrakX er Mageia installereren +

+
+
+
+ + + + + + + + + + + + + + + +

Whether you are new to GNU-Linux or an experienced user, the Mageia + Installer is designed to help make your installation or upgrade as easy as + possible. +

+ + + + + +

The initial menu screen has various options, however the default one will + start the installer, which will normally be all that you will need. +

+ + + + + + +

From this first screen, it is possible to set some personal preferences:

+ + +
+
    +
  • + +

    The language (for the installation only, may be different that the chosen + language for the system) by pressing the key F2 (Legacy mode only) +

    + + +

    + + + + +

    Use the arrow keys to select the language and press the key Enter.

    + + +

    Here is for example, the French welcome screen when using a Live + DVD/CD. Note that the Live DVD/CD menu does not propose: Rescue + System, Memory test and Hardware + Detection Tool. +

    + + +

    + + + + +

    + +
  • +
  • + +

    Change the screen resolution by pressing the F3 key (Legacy mode only).

    + + + +
  • +
  • + +

    Add some kernel options by pressing the F6 + key for the legacy mode or the e key for + the UEFI mode. +

    + + +

    If the installation fails, then it may be necessary to try again using one + of the extra options. The menu called by F6 displays a new line called + Boot options and propose four entries: +

    + + +

    - Default, it doesn't alter anything in the default options.

    + + +

    - Safe Settings, priority is given to the safer options to the detriment of + performances. +

    + + +

    - No ACPI (Advanced Configuration and Power Interface), power management + isn't taken into account. +

    + + +

    - No Local APIC (Local Advanced Programmable Interrupt Controller), it is + about CPU interruptions, select this option if you are asked for. +

    + + +

    When you select one of these entries, it modifies the default options + displayed in the Boot Options line. +

    + + +
    + + + + + + + + +
    [Notat]
    + +

    In some Mageia releases, it may happen that the entries selected with the + key F6 does not appear in the Boot Options line, + however, they are really taken into account. +

    + +
    +
    + + + +
  • +
  • + +

    Add more kernel options by pressing the key F1 (Legacy mode only).

    + + +

    Pressing F1 opens a new window with more available options. Select one with + the arrow keys and press Enter to have more details or press the Esc key to + go back to the welcome screen. +

    + + +

    + + + + +

    + + +

    The detailed view about the option splash. Press Esc or select + Return to Boot Options to go back to the options + list. These options can by added by hand in the Boot + options line. +

    + + + + +

    + + +
    + + + + + + + + +
    [Notat]
    + +

    The help is translated in the chosen language with the F2 key.

    + +
    +
    + +
  • +
+
+ + +

For more information about kernel options on legacy and UEFI systems, see: + https://wiki.mageia.org/en/How_to_set_up_kernel_options

+ + +

Here is the default welcome screen when using a Wired Network-based + Installation CD (Boot.iso or Boot-Nonfree.iso images): +

+ + +

It does not allow to change the language, the available options are + described in the screen. For more information about using a Wired + Network-based Installation CD, see the Mageia + Wiki

+ + +
+ + + + + + + + +
[Advarsel]
+ +

The keyboard layout is the American one.

+ +
+
+ + + + +
+
+
+
+

Installasjonsfasene +

+
+
+
+ + + +

The install process is divided into a number of steps, which can be followed + on the side panel of the screen. +

+ + +

Each step has one or more screens which may also have + Advanced buttons with extra, less commonly required, + options. +

+ + +

Most screens have Help buttons which give further + explanations about the current step. +

+ + +
+ + + + + + + + +
[Notat]
+ +

If somewhere during install you decide to stop the installation, it is + possible to reboot, but please think twice before you do this. Once a + partition has been formatted or updates have started to be installed, your + computer is no longer in the same state and rebooting it could very well + leave you with an unusable system. If in spite of this you are very sure + rebooting is what you want, go to a text terminal by pressing the three keys + Alt Ctrl F2 at the same time. After that, press + Alt Ctrl Delete simultaneously to reboot. +

+ +
+
+ +
+ + +
+
+
+
+

Installasjonsproblem og mulige løsninger +

+
+
+
+ + + +
+
+
+
+

Ikke Grafisk grensesnitt +

+
+
+
+ + + +
+
    +
  • + +

    After the initial screen you did not reach the language selection + screen. This can happen with some graphic cards and older systems. Try using + low resolution by typing vgalo at the prompt. +

    + +
  • +
  • + +

    If the hardware is very old, a graphical installation may not be + possible. In this case it is worth trying a text mode installation. To use + this hit ESC at the first welcome screen and confirm with ENTER. You will be + presented with a black screen with the word "boot:". Type "text" and hit + ENTER. Now continue with the installation in text mode. +

    + +
  • +
+
+ +
+ + +
+
+
+
+

Installasjonen fryser +

+
+
+
+ + + +

If the system appeared to freeze during the installation, this may be a + problem with hardware detection. In this case the automatic detection of + hardware may be bypassed and dealt with later. To try this, type + noauto at the prompt. This option may also be combined with + other options as necessary. +

+ +
+ + +
+
+
+
+

RAM problem +

+
+
+
+ + + +

These will rarely be needed, but in some cases the hardware may report the + available RAM incorrectly. To specify this manually, you can use the + mem=xxxM parameter, where xxx is the correct amount of + RAM. e.g. mem=256M would specify 256MB of RAM. +

+ +
+ + +
+
+
+
+

Dynamiske partisjoner +

+
+
+
+ + + +

If you converted your hard disk from "basic" format to "dynamic" format on + Microsoft Windows, you must know that it is impossible to install Mageia on + this disc. To go back to a basic disk, see the Microsoft documentation: + http://msdn.microsoft.com/en-us/library/cc776315.aspx. +

+ +
+ +
+ +
+ + diff --git a/nb/media_selection.html b/nb/media_selection.html new file mode 100644 index 0000000..8c2db29 --- /dev/null +++ b/nb/media_selection.html @@ -0,0 +1,76 @@ + + + + + Mediumvalg (Ikke fri) + + + + + + +
+
+
+
+

Mediumvalg (Ikke fri) +

+
+
+
+ + + + + + + + + + +

Here you have the list of available repositories. Not all repositories are + available, according to which media you use for installing. The repositories + selection determines which packages will be available for selection during + the next steps. +

+ + +
+
    +
  • + +

    The Core repository cannot be disabled as it contains + the base of the distribution. +

    + +
  • +
  • + +

    The Nonfree repository includes packages that are + free-of-charge, i.e. Mageia may redistribute them, but they contain + closed-source software (hence the name - Nonfree). For example this + repository includes nVidia and ATI graphics card proprietary drivers, + firmware for various WiFi cards, etc. +

    + +
  • +
  • + +

    The Tainted repository includes packages released under + a free license. The main criteria for placing packages in this repository is + that they may infringe patents and copyright laws in some countries, + e.g. Multimedia codecs needed to play various audio/video files; packages + needed to play commercial video DVD, etc. +

    + +
  • +
+
+ +
+ + diff --git a/nb/minimal-install.html b/nb/minimal-install.html new file mode 100644 index 0000000..f1b8287 --- /dev/null +++ b/nb/minimal-install.html @@ -0,0 +1,68 @@ + + + + + Minimal Installasjon + + + + + + +
+
+
+
+

Minimal Installasjon +

+
+
+
+ + + + + + + + + +

You can choose a Minimal Installation by de-selecting everything in the + Package Group Selection screen, see “Valg pakkegruppe”. +

+ +

If desired, you can additionally tick the "Individual package selection" + option in the same screen. +

+ +

Minimal Installation is intended for those with specific uses in mind for + their Mageia, such as a server or a specialised + workstation. You will probably use this option combined with the "Individual + package selection" option mentioned above, to fine-tune your installation, + see “Individuelt pakkevalg”. +

+ +

If you choose this installation class, then the related screen will offer + you a few useful extras to install, such as documentation and X. +

+ +

If selected, "With X" will also include IceWM as lightweight desktop + environment. +

+ +

The basic documentation is provided in the form of man and info pages. It + contains the man pages from the Linux Documentation + Project and the GNU + coreutils info pages. +

+ + + + +
+ + diff --git a/nb/misc-params.html b/nb/misc-params.html new file mode 100644 index 0000000..4251d00 --- /dev/null +++ b/nb/misc-params.html @@ -0,0 +1,388 @@ + + + + + Summary of miscellaneous parameters + + + + + + +
+
+
+
+

Summary of miscellaneous parameters +

+
+
+
+ + + + + + + +

DrakX made smart choices for the configuration of your system depending on + the choices you made and on the hardware DrakX detected. You can check the + settings here and change them if you want after pressing + Configure. +

+ + +
+ + + + + + + + +
[Notat]
+ +

As a general rule, default settings are recommended and you can keep them + with 3 exceptions: +

+
+
    +
  • + +

    there are known issues with a default setting

    + +
  • +
  • + +

    the default setting has already been tried and it fails

    + +
  • +
  • + +

    something else is said in the detailed sections below

    + +
  • +
+
+ +
+
+ + +
+
+
+
+

System parameters +

+
+
+
+ + + +
+
    +
  • + +

    Tidssone

    + + +

    DrakX selected a time zone for you, depending on your preferred + language. You can change it if needed. See also “Sett opp tidssonen din”

    + +
  • +
  • + +

    Land/ Region

    + + +

    If you are not in the selected country, it is very important that you + correct the setting. See “Velg Land/Region”

    + +
  • +
  • + +

    Oppstartslaster

    + + +

    DrakX har gjort bra valg for oppstartslaster parametre +

    + + +

    Ikke gjør endringer hvis du ikke vet hvordan du konfigurerer Grub2 +

    + + +

    For mer informasjon, se “Hovedvalg for oppstartslaster”

    + +
  • +
  • + +

    Brukeradministrasjon

    + + +

    Her kan du kan legge til flere brukere. De vil få egne /home + (hjemme) områder. +

    + +
  • +
  • + +

    Tjenester: +

    + + +

    System services refer to those small programs which run the background + (daemons). This tool allows you to enable or disable certain tasks. +

    + + +

    You should check carefully before changing anything here - a mistake may + prevent your computer from operating correctly. +

    + + +

    For mer informasjon, se “Konfigurer dine tjenester”

    + +
  • +
+
+ +
+ + +
+
+
+
+

Maskinvare-parametre +

+
+
+
+ + + +
+
    +
  • + +

    Tastatur: +

    + + +

    This is where you setup or change your keyboard layout which will depend on + your location, language or type of keyboard. +

    + + +
    + + + + + + + + +
    [Notat]
    + +

    If you notice a wrong keyboard layout and want to change it, keep in mind + that your passwords are going to change too. +

    + +
    +
    + +
  • +
  • + +

    Mus: +

    + + +

    Her kan du legge til, konfigurere andre pekenheter. +

    + +
  • +
  • + +

    lydkort: +

    + + +

    The installer uses the default driver, if there is a default one. The option + to select a different driver is only given when there is more than one + driver for your card, but none of them is the default one. +

    + +
  • +
  • + +

    Grafisk grensesnitt: +

    + + +

    Denne seksjonen lar deg konfigurere grafikkkort og skjermer. +

    + + +

    For mer information, se “Graphic Card and Monitor Configuration”. +

    + +
  • +
+
+ + + +
+ + +
+
+
+
+

Nettverk og internettparametre +

+
+
+
+ + + +
+
    +
  • + +

    Nettverk: +

    + + +

    You can configure your network here, but for network cards with non-free + drivers it is better to do that after reboot, in the Mageia + Control Center, if you have not yet enabled the Nonfree media + repositories. +

    + + +
    + + + + + + + + +
    [Advarsel]
    + +

    Når du legger til et nettverkskort, ikke glem å sette opp dette + grensesnittet i brannmuren også. +

    + +
    +
    + +
  • +
  • + +

    Proxier: +

    + + +

    A Proxy Server acts as an intermediary between your computer and the wider + internet. This section allows you to configure your computer to utilize a + proxy service. +

    + + +

    You may need to consult your systems administrator to get the parameters you + need to enter here +

    + +
  • +
+
+ +
+ + +
+
+
+
+

Sikkerhet +

+
+
+
+ + + +
+
    +
  • + +

    Sikkerhetsnivå: +

    + + +

    Here you set the Security level for your computer, in most cases the default + setting (Standard) is adequate for general use. +

    + + +

    Marker det alternativet som best passer din bruk. +

    + +
  • +
  • + +

    Brannmur: +

    + + +

    A firewall is intended to be a barrier between your important data and the + rascals out there on the internet who would compromise or steal it. +

    + + +

    Select the services that you wish to have access to your system. Your + selections will depend on what you use your computer for. For more + information, see ???. +

    + + +
    + + + + + + + + +
    [Advarsel]
    + +

    Bear in mind that allowing everything (no firewall) may be very risky. +

    + +
    +
    + +
  • +
+
+ +
+ +
+ + diff --git a/nb/note.png b/nb/note.png new file mode 100644 index 0000000..8f3a936 Binary files /dev/null and b/nb/note.png differ diff --git a/nb/securityLevel.html b/nb/securityLevel.html new file mode 100644 index 0000000..d949fa0 --- /dev/null +++ b/nb/securityLevel.html @@ -0,0 +1,49 @@ + + + + + Sikkerhetsnivå + + + + + + +
+
+
+
+

Sikkerhetsnivå +

+
+
+
+ + + + + + + + + + +

Du kan justere sikkerhetsnivået ditt her. +

+ + +

La det stå tomt hvis du ikke vet hva du bør gjøre. +

+ + +

After install, it will always be possible to adjust your security settings + in the Security part of the Mageia Control Center. +

+ +
+ + diff --git a/nb/selectCountry.html b/nb/selectCountry.html new file mode 100644 index 0000000..2cdaedc --- /dev/null +++ b/nb/selectCountry.html @@ -0,0 +1,109 @@ + + + + + Velg Land/Region + + + + + + +
+
+
+
+

Velg Land/Region +

+
+
+
+ + + + + + + +

Select your country or region. This is important for all kinds of settings, + like the currency and wireless regulatory domain. Setting the wrong country + can lead to not being able to use a Wireless network. +

+ + +

If your country isn't in the list, click the Other + Countries button and choose your country / region there. +

+ + +
+ + + + + + + + +
[Notat]
+ +

If your country is only in the Other Countries list, + after clicking OK it may seem a country from the + first list was chosen. Please ignore this, DrakX will follow your real + choice. +

+ +
+
+ + +
+
+
+
+

Innput metode +

+
+
+
+ + + +

In the Other Countries screen you can also select an + input method (at the bottom of the list). Input methods allow users to input + multilingual characters (Chinese, Japanese, Korean, etc). IBus is the + default input method, so users should not need to configure it + manually. Other input methods(SCIM, GCIN, HIME, etc) also provide similar + functions and can be installed if you added HTTP/FTP media before package + selection. +

+ + +
+ + + + + + + + +
[Notat]
+ +

If you missed the input method setup during installation, you can access it + after you boot your installed system via "Configure your Computer" -> + "System", or by running localedrake as root. +

+ +
+
+ +
+ +
+ + diff --git a/nb/selectInstallClass.html b/nb/selectInstallClass.html new file mode 100644 index 0000000..6031c9b --- /dev/null +++ b/nb/selectInstallClass.html @@ -0,0 +1,136 @@ + + + + + Installer eller Oppgrader + + + + + + +
+
+
+
+

Installer eller Oppgrader +

+
+
+
+ + + + + + + + + + + + + + + +
+
    +
  • + +

    Installer

    + + +

    Bruk dette alternativet for en nyinstallasjon av + Mageia. +

    + +
  • +
  • + +

    Oppgrader

    + + +

    If you have one or more Mageia installations on + your system, the installer will allow you to upgrade one of them to the + latest release. +

    + + +
    + + + + + + + + +
    [Advarsel]
    + +

    Only upgrading from a previous Mageia version that was still + supported when this installer's version was released, has been + thoroughly tested. If you want to upgrade a Mageia version that had already + reached its End Of Life when this one was released, then it is better to do + a clean install while preserving your /home partition. +

    + +
    +
    + +
  • +
+
+ + +
+ + + + + + + + +
[Notat]
+ +

If during install you decide to stop the installation, it is possible to + reboot, but please think twice before you do this. Once a partition has been + formatted or updates have started to be installed, your computer isn't in + the same state anymore and rebooting it could very well leave you with an + unusable system. If in spite of that you are very sure rebooting is what you + want, go to a text terminal by pressing the three keys Alt Ctrl + F2 at the same time. After that, press Alt Ctrl + Delete simultaneously to reboot. +

+ +
+
+ + +
+ + + + + + + + +
[Tips]
+ +

If you have discovered that you forgot to select an additional language, you + can return from the "Install or Upgrade" screen to the language choice + screen by pressing Alt Ctrl Home. Do + not do this later in the install. +

+ +
+
+ +
+ + diff --git a/nb/selectKeyboard.html b/nb/selectKeyboard.html new file mode 100644 index 0000000..960d791 --- /dev/null +++ b/nb/selectKeyboard.html @@ -0,0 +1,93 @@ + + + + + Tastatur + + + + + + +
+
+
+
+

Tastatur +

+
+
+
+ + + + + + + +

DrakX selects an appropriate keyboard for your language. If no suitable + keyboard is found it will default to a US keyboard layout. +

+ + + + +
+
    +
  • + +

    Make sure that the selection is correct or choose another keyboard + layout. If you don't know which layout your keyboard has, look in the + specifications that came with your system, or ask the computer vendor. There + may even be a label on the keyboard that identifies the layout. You can also + look here: en.wikipedia.org/wiki/Keyboard_layout

    + +
  • +
  • + +

    If your keyboard isn't in the list shown, click on + More to get a full list, and select your keyboard + there. +

    + + +
    + + + + + + + + +
    [Advarsel]
    + +

    After choosing a keyboard from the More dialog, + you'll return to the first keyboard choice dialog and it will seem as though + a keyboard from that screen was chosen. You can safely ignore this anomaly + and continue the installation: Your keyboard is the one you chose from the + full list. +

    + +
    +
    + +
  • +
  • + +

    If you choose a keyboard based on non-Latin characters, you will see an + extra dialog screen asking how you would prefer to switch between the Latin + and non-Latin keyboard layouts +

    + +
  • +
+
+ +
+ + diff --git a/nb/selectLanguage.html b/nb/selectLanguage.html new file mode 100644 index 0000000..8e5927a --- /dev/null +++ b/nb/selectLanguage.html @@ -0,0 +1,105 @@ + + + + + Velg språk + + + + + + +
+
+
+
+

Velg språk +

+
+
+
+ + + + + + + + + + + + + +

Select your preferred language, by first expanding the list for your + continent. Mageia will use this selection during + the installation and for your installed system. +

+ + +

If it is likely that you will require several languages installed on your + system, for yourself or other users, then you should use the + Multiple languages button to add them now. It will be + difficult to add extra language support after installation. +

+ + + + +
+ + + + + + + + +
[Advarsel]
+ +

Even if you choose more than one language, you must first choose one of them + as your preferred language in the first language screen. It will also be + marked as chosen in the multiple languages screen . +

+ +
+
+ + +
+
    +
  • + +

    If your keyboard language is not the same as your preferred language, then + it is advisable to install the language of your keyboard as well. +

    + +
  • +
  • + +

    Mageia bruker UTF-8 (Unicode) som standard.

    + + +

    This may be disabled in the "multiple languages" screen if you know that it + is inappropriate for your language. Disabling UTF-8 applies to all installed + languages. +

    + +
  • +
  • + +

    You can change the language of your system after installation in the Mageia + Control Center -> System -> Manage localization for your system. +

    + +
  • +
+
+ +
+ + diff --git a/nb/selectMouse.html b/nb/selectMouse.html new file mode 100644 index 0000000..b4f3b9d --- /dev/null +++ b/nb/selectMouse.html @@ -0,0 +1,54 @@ + + + + + Velg mus + + + + + + +
+
+
+
+

Velg mus +

+
+
+
+ + + + + + + + + + + + + + +

Hvis du ikke er fornøyd med hvordan musa virke, can du velge en annen her. +

+ + +

Normalt er, Universal - Enhver PS/2 og USB + mus et godt valg. +

+ + +

Select Universal - Force evdev to + configure the buttons that do not work on a mouse with six or more buttons. +

+ +
+ + diff --git a/nb/setupBootloader.html b/nb/setupBootloader.html new file mode 100644 index 0000000..a86fc34 --- /dev/null +++ b/nb/setupBootloader.html @@ -0,0 +1,402 @@ + + + + + Hovedvalg for oppstartslaster + + + + + + +
+
+
+
+

Hovedvalg for oppstartslaster +

+
+
+
+ + + + + + + +
+
+
+
+

Oppstartslaster grensesnitt +

+
+
+
+ + + +

Mageia bruker som standard kun:

+ + +
+
    +
  • + +

    Grub2 (med eller uten en grafisk meny) for et eledre/MBR eller eldre GPT + system +

    + +
  • +
  • + +

    Grub2-efi for et UEFI system.

    + +
  • +
+
+ + +
+ + + + + + + + +
[Tips]
+ +

Mageias grafiske menyer er fine:

+ +
+
+ + +
+
+
+
+

Grub2 på et eldre/MBR og eldre/GPT system +

+
+
+
+ + + + + +

Don't modify the "Boot Device" unless you really know what you are doing.

+ +
+ + +
+
+
+
+

Grub2-efi på UEFI systemer +

+
+
+
+ + + +

With an UEFI system, the user interface is slightly different as you cannot + choose between with or without graphical menu +

+ + + + +

If Mageia is the only system installed on your computer, the installer + created an ESP (EFI System Partition) to receive the bootloader + (Grub2-efi). If there are already UEFI operating systems installed on your + computer (Windows 8 for example), the Mageia installer detects the existing + ESP created by Windows and adds grub2-efi. Although it is possible to have + several ESPs, only one is advised and enough whatever the number of + operating systems you have. +

+ + +

Don't modify the "Boot Device" unless you really know what you are doing.

+ +
+ +
+ + +
+
+
+
+

Bruker en Mageia oppstartslaster +

+
+
+
+ + + +

Som standard i henhold til systemet ditt, skriver Mageia en ny:

+ + +
+
    +
  • + +

    GRUB2 oppstartslaster, enten til MBR (Master Boot Record) på den første + harddisken eller til BIOS oppstartspartisjonen. +

    + +
  • +
  • + +

    Grub2-efi oppstartslaster til ESP

    + +
  • +
+
+ + +

If you already have other operating systems installed, Mageia attempts to + add them to your new Mageia boot menu. If you don't want this behaviour, + click on Next and then uncheck the box + Probe Foreign OS

+ + + +
+ + +
+
+
+
+

Bruker en eksisterende oppstartslaster +

+
+
+
+ + + +

The exact procedure for adding your Mageia system to an existing bootloader + is beyond the scope of this help, however in most cases it will involve + running the relevant bootloader installation program which should detect and + add it automatically. See the documentation for the operating system in + question. +

+ +
+ + +
+
+
+
+

Bruker kjedelasting +

+
+
+
+ + + +

If you don't want a bootable Mageia, but to chain load it from another OS, + click on Next, then on + Advanced and Check the box Do not touch ESP + or MBR. +

+ + + + +

Du vil få en advarsel om at oppstartslasteren mangler. Ignorer den ved å + klikke på OK. +

+ + + +
+ + +
+
+
+
+

Valg +

+
+
+
+ + + +
+
+
+
+

Første side +

+
+
+
+ + + +
+
    +
  • + +

    Delay before booting the default image: This text box + lets you set a delay in seconds before the default operating system is + started up. +

    + +
  • +
  • + +

    Security: This allows you to set a password for the + bootloader. This means other people can not enter single user mode or change + settings at the boot time. +

    + +
  • +
  • + +

    Password: This text box is where you actually put the + password +

    + +
  • +
  • + +

    Password (again): Retype the password and Drakx will + check that it matches with the one set above. +

    + +
  • +
  • + +

    Advanced

    + + +
    +
      +
    • + +

      Enable ACPI: ACPI (Advanced Configuration and Power + Interface) is a standard for the power management. It can save energy by + stopping unused devices, this was the method used before APM. Unchecking it + could be useful if, for example, your computer does not support ACPI or if + you think the ACPI implementation might cause some problems (for instance + random reboots or system lockups). +

      + +
    • +
    • + +

      Enable SMP: This option enables / disables symmetric + multiprocessing for multi core processors. +

      + +
    • +
    • + +

      Enable APIC: Enabling or disabling this gives the + operating system access to the Advanced Programmable Interrupt + Controller. APIC devices permit more complex priority models, and Advanced + IRQ (Interrupt Request) management. +

      + +
    • +
    • + +

      Enable Local APIC: Here you can set local APIC, which + manages all external interrupts for a specific processor in an SMP system. +

      + +
    • +
    +
    + +
  • +
+
+ +
+ + +
+
+
+
+

Neste side +

+
+
+
+ + + +
+
    +
  • + +

    Default: Operating system started up by default +

    + +
  • +
  • + +

    Append: This option lets you pass the kernel + information or tell the kernel to give you more information as it boots. +

    + +
  • +
  • + +

    Probe foreign OS: see above Using a Mageia bootloader

    + +
  • +
  • + +

    Advanced

    +
    +
      +
    • + +

      Video mode: This sets the screen size and colour depth + the boot menu will use. If you click the down triangle you will be offered + other size and colour depth options. +

      + +
    • +
    • + +

      Do not touch ESP or MBR: see above Using the chain loading

      + +
    • +
    +
    + +
  • +
+
+ +
+ +
+ +
+ + diff --git a/nb/setupBootloaderAddEntry.html b/nb/setupBootloaderAddEntry.html new file mode 100644 index 0000000..4dd7614 --- /dev/null +++ b/nb/setupBootloaderAddEntry.html @@ -0,0 +1,53 @@ + + + + + Legg til eller endre et oppstartsmenypunkt + + + + + + +
+
+
+
+

Legg til eller endre et oppstartsmenypunkt +

+
+
+
+ + + + + +

To do that you need to manually edit /boot/grub2/custom.cfg or use the + software grub-customizer instead (Available in the Mageia repositories). +

+ + +
+ + + + + + + + +
[Notat]
+ +

For mer informasjon, se vår wiki: https://wiki.mageia.org/en/Grub2-efi_and_Mageia

+ +
+
+ +
+ + diff --git a/nb/setupSCSI.html b/nb/setupSCSI.html new file mode 100644 index 0000000..fd9efe0 --- /dev/null +++ b/nb/setupSCSI.html @@ -0,0 +1,57 @@ + + + + + Set opp SCSI + + + + + + +
+
+
+
+

Set opp SCSI +

+
+
+
+ + + + + + + + + + + + + + + + +

DrakX usually detects hard disks correctly. With some older SCSI controllers + it may be unable to determine the correct drivers to use and subsequently + fail to recognise the drive. +

+ + +

If this happens, you will need to manually tell Drakx which SCSI drive(s) + you have. +

+ + +

DrakX should then be able to configure the drive(s) correctly. +

+ +
+ + diff --git a/nb/soundConfig.html b/nb/soundConfig.html new file mode 100644 index 0000000..740b7bc --- /dev/null +++ b/nb/soundConfig.html @@ -0,0 +1,79 @@ + + + + + Sett opp lyd + + + + + + +
+
+
+
+

Sett opp lyd +

+
+
+
+ + + + + + + +

In this screen the name of the driver that the installer chose for your + sound card is given, which will be the default driver if we have a default + one. +

+ + +

The default driver should work without problems. However, if after install + you do encounter problems, then run draksound or start + this tool via MCC (Mageia Control Center), by choosing the + Hardware tab and clicking on Sound + Configuration at the top right of the screen. +

+ + +

Then, in the draksound or "Sound Configuration" tool screen, click on + Advanced and then on + Troubleshooting to find very useful advice about how + to solve the problem. +

+ + +
+
+
+
+

Avansert +

+
+
+
+ + + +

Clicking Advanced in this screen, during install, is + useful if there is no default driver and there are several drivers + available, but you think the installer selected the wrong one. +

+ + +

In that case you can select a different driver after clicking on + Let me pick any driver. +

+ +
+ +
+ + diff --git a/nb/takeOverHdConfirm.html b/nb/takeOverHdConfirm.html new file mode 100644 index 0000000..bfe303d --- /dev/null +++ b/nb/takeOverHdConfirm.html @@ -0,0 +1,50 @@ + + + + + Confirm hard disk to be formatted + + + + + + +
+
+
+
+

Confirm hard disk to be formatted +

+
+
+
+ + + + + + + + + + + + + + +

Click on Previous if you are not sure about your + choice. +

+ + +

Click on Next if you are sure and want to erase every + partition, every operating system and all data on that hard disk. +

+ +
+ + diff --git a/nb/tip.png b/nb/tip.png new file mode 100644 index 0000000..fac7493 Binary files /dev/null and b/nb/tip.png differ diff --git a/nb/uninstall-Mageia.html b/nb/uninstall-Mageia.html new file mode 100644 index 0000000..562a35e --- /dev/null +++ b/nb/uninstall-Mageia.html @@ -0,0 +1,80 @@ + + + + + Avinstaller Mageia + + + + + +
+
+
+
+

Avinstaller Mageia +

+
+
+
+ + + + + + +
+
+
+
+

Hvordan +

+
+
+
+ + + +

If Mageia didn't convince you or you can't install it correctly, in short + you want get rid of it. That is your right and Mageia also gives you the + possibility to uninstall. This is not true for every operating system. +

+ + +

After your data backup, reboot your installation Mageia DVD and select + Rescue system, then, Restore Windows boot loader. At the next boot, you will + only have Windows with no option to choose your operating system. +

+ + +

To recover the space used by Mageia partitions on Windows, click on + Start -> Control Panel -> Administrative Tools -> Computer Management + -> Storage -> Disk Management to access to the partition + management. You will recognize the Mageia partition because they are labeled + Unknown, and also by their size and place in the + disk. Right click on each of these partitions and select + Delete. The space will be freed. +

+ + +

If you are using Windows XP, you can create a new partition and format it + (FAT32 or NTFS). It will get a partition letter. +

+ + +

If you have Vista or 7, you have one more possibility, you can extend the + existing partition that is at the left of the freed space. There are other + partitioning tools that can be used, such as gparted, available for both + windows and linux. As always, when changing partitions, be very careful, and + make sure all important things have been backed up. +

+ +
+ +
+ + diff --git a/nb/warning.png b/nb/warning.png new file mode 100644 index 0000000..be0546f Binary files /dev/null and b/nb/warning.png differ -- cgit v1.2.1