# translation of DrakX-uz.po to Uzbek # Copyright (C) 2003, 2004 Free Software Foundation, Inc. # Copyright (C) 2003 Mandriva. # Mashrab Kuvatov , 2003, 2004. # msgid "" msgstr "" "Project-Id-Version: DrakX-uz\n" "POT-Creation-Date: 2005-07-18 19:19+0200\n" "PO-Revision-Date: 2004-10-10 00:41+0500\n" "Last-Translator: Mashrab Kuvatov \n" "Language-Team: Uzbek \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.9\n" #: ../move/move.pm:292 #, fuzzy, c-format msgid "Which USB key do you want to format?" msgstr "Bandning qaysi turini qo'shmoqchisiz?" #: ../move/move.pm:296 #, c-format msgid "" "You are about to format a USB device \"%s\". This will delete all data on " "it.\n" "Make sure that the selected device is the USB key you want to format. \n" "We advise you to unplug all other USB storage devices while doing this " "operation." msgstr "" #: ../move/move.pm:448 ../move/move.pm:460 #, c-format msgid "Key is not writable" msgstr "" #: ../move/move.pm:450 #, c-format msgid "" "The USB key seems to have write protection enabled. Please\n" "unplug it, remove write protection, and then plug it again." msgstr "" #: ../move/move.pm:452 #, c-format msgid "Retry" msgstr "Boshqadan urinish" #: ../move/move.pm:453 ../move/move.pm:497 #, c-format msgid "Continue without USB key" msgstr "" #: ../move/move.pm:462 #, c-format msgid "" "The USB key seems to have write protection enabled, but we can not safely\n" "unplug it now.\n" "\n" "\n" "Click the button to reboot the machine, unplug it, remove write protection,\n" "plug the key again, and launch Mandriva Move again." msgstr "" #: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1319 #, c-format msgid "Reboot" msgstr "O'chirib-yoqish" #: ../move/move.pm:473 #, c-format msgid "" "Your USB key does not have any valid Windows (FAT) partitions.\n" "We need one to continue (beside, it's more standard so that you\n" "will be able to move and access your files from machines\n" "running Windows). Please plug in an USB key containing a\n" "Windows partition instead.\n" "\n" "\n" "You may also proceed without an USB key - you'll still be\n" "able to use Mandriva Move as a normal live Mandriva\n" "Operating System." msgstr "" #: ../move/move.pm:483 #, c-format msgid "" "We did not detect any USB key on your system. If you\n" "plug in an USB key now, Mandriva Move will have the ability\n" "to transparently save the data in your home directory and\n" "system wide configuration, for next boot on this computer\n" "or another one. Note: if you plug in a key now, wait several\n" "seconds before detecting again.\n" "\n" "\n" "You may also proceed without an USB key - you'll still be\n" "able to use Mandriva Move as a normal live Mandriva\n" "Operating System." msgstr "" #: ../move/move.pm:494 #, c-format msgid "Need a key to save your data" msgstr "" #: ../move/move.pm:496 #, c-format msgid "Detect USB key again" msgstr "" #: ../move/move.pm:517 #, fuzzy, c-format msgid "Setting up USB key" msgstr "ISA PNP uskunalari o'rnatilmoqda: " #: ../move/move.pm:517 #, fuzzy, c-format msgid "Please wait, setting up system configuration files on USB key..." msgstr "Iltimos kutib turing, asbob-uskunalar aniqlanmoqda va moslanmoqda..." #: ../move/move.pm:546 #, c-format msgid "Enter your user information, password will be used for screensaver" msgstr "" #: ../move/move.pm:556 #, c-format msgid "Auto configuration" msgstr "Avto-moslash" #: ../move/move.pm:556 #, c-format msgid "Please wait, detecting and configuring devices..." msgstr "Iltimos kutib turing, asbob-uskunalar aniqlanmoqda va moslanmoqda..." #: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664 #: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:113 diskdrake/interactive.pm:230 #: diskdrake/interactive.pm:243 diskdrake/interactive.pm:404 #: diskdrake/interactive.pm:422 diskdrake/interactive.pm:558 #: diskdrake/interactive.pm:563 diskdrake/smbnfs_gtk.pm:41 fsedit.pm:209 #: install_any.pm:1730 install_any.pm:1782 install_steps.pm:81 #: install_steps_interactive.pm:37 interactive/http.pm:117 #: interactive/http.pm:118 network/ndiswrapper.pm:27 network/ndiswrapper.pm:42 #: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101 #: network/netconnect.pm:819 network/netconnect.pm:923 #: network/netconnect.pm:927 network/netconnect.pm:931 #: network/netconnect.pm:936 network/netconnect.pm:1066 #: network/netconnect.pm:1070 network/netconnect.pm:1074 #: network/netconnect.pm:1078 network/netconnect.pm:1186 #: network/netconnect.pm:1191 network/netconnect.pm:1211 #: network/netconnect.pm:1364 network/thirdparty.pm:267 #: network/thirdparty.pm:274 network/thirdparty.pm:310 #: network/thirdparty.pm:312 network/thirdparty.pm:333 #: network/thirdparty.pm:357 printer/printerdrake.pm:244 #: printer/printerdrake.pm:251 printer/printerdrake.pm:276 #: printer/printerdrake.pm:422 printer/printerdrake.pm:427 #: printer/printerdrake.pm:440 printer/printerdrake.pm:450 #: printer/printerdrake.pm:514 printer/printerdrake.pm:641 #: printer/printerdrake.pm:1352 printer/printerdrake.pm:1399 #: printer/printerdrake.pm:1436 printer/printerdrake.pm:1481 #: printer/printerdrake.pm:1485 printer/printerdrake.pm:1499 #: printer/printerdrake.pm:1591 printer/printerdrake.pm:1672 #: printer/printerdrake.pm:1676 printer/printerdrake.pm:1680 #: printer/printerdrake.pm:1729 printer/printerdrake.pm:1787 #: printer/printerdrake.pm:1791 printer/printerdrake.pm:1805 #: printer/printerdrake.pm:1920 printer/printerdrake.pm:1924 #: printer/printerdrake.pm:1967 printer/printerdrake.pm:2042 #: printer/printerdrake.pm:2060 printer/printerdrake.pm:2069 #: printer/printerdrake.pm:2078 printer/printerdrake.pm:2089 #: printer/printerdrake.pm:2153 printer/printerdrake.pm:2247 #: printer/printerdrake.pm:2767 printer/printerdrake.pm:3042 #: printer/printerdrake.pm:3048 printer/printerdrake.pm:3596 #: printer/printerdrake.pm:3600 printer/printerdrake.pm:3604 #: printer/printerdrake.pm:4064 printer/printerdrake.pm:4305 #: printer/printerdrake.pm:4329 printer/printerdrake.pm:4406 #: printer/printerdrake.pm:4472 printer/printerdrake.pm:4592 #: standalone/drakTermServ:393 standalone/drakTermServ:467 #: standalone/drakTermServ:476 standalone/drakTermServ:771 #: standalone/drakTermServ:778 standalone/drakTermServ:801 #: standalone/drakTermServ:848 standalone/drakTermServ:1056 #: standalone/drakTermServ:1536 standalone/drakTermServ:1552 #: standalone/drakTermServ:1557 standalone/drakTermServ:1565 #: standalone/drakTermServ:1577 standalone/drakTermServ:1598 #: standalone/drakauth:36 standalone/drakbackup:498 standalone/drakbackup:612 #: standalone/drakbackup:1090 standalone/drakbackup:1122 #: standalone/drakbackup:1645 standalone/drakbackup:1801 #: standalone/drakbackup:2415 standalone/drakbackup:4104 #: standalone/drakbackup:4324 standalone/drakclock:124 #: standalone/drakconnect:672 standalone/drakconnect:676 #: standalone/drakconnect:681 standalone/drakconnect:696 #: standalone/drakfont:210 standalone/drakfont:223 standalone/drakfont:261 #: standalone/drakgw:50 standalone/drakgw:188 standalone/drakgw:217 #: standalone/drakgw:258 standalone/drakgw:292 standalone/drakgw:394 #: standalone/drakhosts:246 standalone/drakhosts:253 standalone/drakhosts:260 #: standalone/draknfs:623 standalone/draknfs:630 standalone/draknfs:637 #: standalone/drakroam:41 standalone/draksplash:15 standalone/draksplash:159 #: standalone/drakxtv:107 standalone/finish-install:49 standalone/logdrake:168 #: standalone/logdrake:437 standalone/logdrake:442 standalone/scannerdrake:59 #: standalone/scannerdrake:202 standalone/scannerdrake:261 #: standalone/scannerdrake:715 standalone/scannerdrake:726 #: standalone/scannerdrake:865 standalone/scannerdrake:876 #: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121 #, c-format msgid "Error" msgstr "Xato" #: ../move/move.pm:605 install_steps.pm:82 #, c-format msgid "" "An error occurred, but I do not know how to handle it nicely.\n" "Continue at your own risk." msgstr "" #: ../move/move.pm:660 install_steps_interactive.pm:37 #, c-format msgid "An error occurred" msgstr "Xato ro'y berdi" #: ../move/move.pm:666 #, c-format msgid "" "An error occurred:\n" "\n" "\n" "%s\n" "\n" "This may come from corrupted system configuration files\n" "on the USB key, in this case removing them and then\n" "rebooting Mandriva Move would fix the problem. To do\n" "so, click on the corresponding button.\n" "\n" "\n" "You may also want to reboot and remove the USB key, or\n" "examine its contents under another OS, or even have\n" "a look at log files in console #3 and #4 to try to\n" "guess what's happening." msgstr "" #: ../move/move.pm:681 #, c-format msgid "Remove system config files" msgstr "Tizimning moslama fayllarini o'chirish" #: ../move/move.pm:682 #, c-format msgid "Simply reboot" msgstr "" #: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96 #, c-format msgid "You can only run with no CDROM support" msgstr "" #: ../move/tree/mdk_totem:71 #, fuzzy, c-format msgid "Kill those programs" msgstr "X dasturlaridan foydalanishga ruxsat etish" #: ../move/tree/mdk_totem:72 #, c-format msgid "No CDROM support" msgstr "" #: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:92 #: diskdrake/interactive.pm:1046 diskdrake/interactive.pm:1056 #: diskdrake/interactive.pm:1109 #, c-format msgid "Read carefully!" msgstr "Diqqat bilan o'qing!" #: ../move/tree/mdk_totem:77 #, c-format msgid "" "You can not use another CDROM when the following programs are running: \n" "%s" msgstr "" #: ../move/tree/mdk_totem:101 #, c-format msgid "Copying to memory to allow removing the CDROM" msgstr "" #: Xconfig/card.pm:13 #, c-format msgid "256 kB" msgstr "256 Kb" #: Xconfig/card.pm:14 #, c-format msgid "512 kB" msgstr "512 Kb" #: Xconfig/card.pm:15 #, c-format msgid "1 MB" msgstr "1 Mb" #: Xconfig/card.pm:16 #, c-format msgid "2 MB" msgstr "2 Mb" #: Xconfig/card.pm:17 #, c-format msgid "4 MB" msgstr "4 Mb" #: Xconfig/card.pm:18 #, c-format msgid "8 MB" msgstr "8 Mb" #: Xconfig/card.pm:19 #, c-format msgid "16 MB" msgstr "16 Mb" #: Xconfig/card.pm:20 #, c-format msgid "32 MB" msgstr "32 Mb" #: Xconfig/card.pm:21 #, c-format msgid "64 MB or more" msgstr "64 Mb yoki ko'proq" #: Xconfig/card.pm:155 #, c-format msgid "X server" msgstr "X serveri" #: Xconfig/card.pm:156 #, c-format msgid "Choose an X server" msgstr "Grafik kartani tanlash" #: Xconfig/card.pm:188 #, c-format msgid "Multi-head configuration" msgstr "" #: Xconfig/card.pm:189 #, c-format msgid "" "Your system supports multiple head configuration.\n" "What do you want to do?" msgstr "" #: Xconfig/card.pm:258 #, c-format msgid "Can not install Xorg package: %s" msgstr "Quyidagi Xorg paketini o'rnatib bo'lmadi: %s" #: Xconfig/card.pm:268 #, c-format msgid "Select the memory size of your graphics card" msgstr "Grafik kartangizni xotirasining hajmini tanlang" #: Xconfig/card.pm:345 #, c-format msgid "Xorg configuration" msgstr "Xorg moslamasi" #: Xconfig/card.pm:347 #, c-format msgid "Which configuration of Xorg do you want to have?" msgstr "Xorg'ning qanday moslamasini istaysiz?" #: Xconfig/card.pm:380 #, c-format msgid "Configure all heads independently" msgstr "" #: Xconfig/card.pm:381 #, c-format msgid "Use Xinerama extension" msgstr "Xinerama kengaytmasidan foydalanish" #: Xconfig/card.pm:386 #, c-format msgid "Configure only card \"%s\"%s" msgstr "Faqat \"%s\"%s kartasini moslash" #: Xconfig/card.pm:398 Xconfig/various.pm:23 #, c-format msgid "Xorg %s" msgstr "Xorg %s" #: Xconfig/card.pm:405 Xconfig/various.pm:22 #, c-format msgid "Xorg %s with 3D hardware acceleration" msgstr "" #: Xconfig/card.pm:407 #, c-format msgid "Your card can have 3D hardware acceleration support with Xorg %s." msgstr "" #: Xconfig/card.pm:413 #, c-format msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration" msgstr "" #: Xconfig/card.pm:415 #, c-format msgid "" "Your card can have 3D hardware acceleration support with Xorg %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" #: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:963 #, c-format msgid "Custom" msgstr "Boshqa" #: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14 #: install_steps_interactive.pm:85 install_steps_interactive.pm:1319 #: printer/printerdrake.pm:744 printer/printerdrake.pm:4401 #: printer/printerdrake.pm:4853 standalone/drakhosts:266 #: standalone/draksplash:85 standalone/logdrake:173 standalone/net_applet:85 #: standalone/scannerdrake:477 #, c-format msgid "Quit" msgstr "Chiqish" #: Xconfig/main.pm:117 #, c-format msgid "Graphic Card" msgstr "Grafik karta" #: Xconfig/main.pm:120 Xconfig/monitor.pm:110 #, c-format msgid "Monitor" msgstr "Monitor" #: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:286 #, c-format msgid "Resolution" msgstr "O'lcham" #: Xconfig/main.pm:128 #, c-format msgid "Test" msgstr "Sinash" #: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:448 #: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:79 #: standalone/drakfont:491 standalone/drakfont:553 #, c-format msgid "Options" msgstr "Parametrlar" #: Xconfig/main.pm:168 #, c-format msgid "Your Xorg configuration file is broken, we will ignore it." msgstr "" #: Xconfig/main.pm:186 #, c-format msgid "" "Keep the changes?\n" "The current configuration is:\n" "\n" "%s" msgstr "" "O'zgarishlarni saqlaymi?\n" "Joriy moslama quyidagicha:\n" "\n" "%s" #: Xconfig/monitor.pm:111 #, c-format msgid "Choose a monitor for head #%d" msgstr "" #: Xconfig/monitor.pm:111 #, c-format msgid "Choose a monitor" msgstr "Monitorni tanlash" #: Xconfig/monitor.pm:117 #, c-format msgid "Plug'n Play" msgstr "Plug'n Play" #: Xconfig/monitor.pm:118 mouse.pm:49 #, c-format msgid "Generic" msgstr "Andoza" #: Xconfig/monitor.pm:119 standalone/drakconnect:591 standalone/harddrake2:54 #: standalone/harddrake2:88 #, c-format msgid "Vendor" msgstr "Ishlab chiqaruvchi" #: Xconfig/monitor.pm:129 #, c-format msgid "Plug'n Play probing failed. Please select the correct monitor" msgstr "" "Plug'n Play aniqlash muvaffaqiyatsiz tugadi. Iltimos to'g'ri keladigan " "monitorni tanlang" #: Xconfig/monitor.pm:137 #, c-format msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" #: Xconfig/monitor.pm:144 #, c-format msgid "Horizontal refresh rate" msgstr "" #: Xconfig/monitor.pm:145 #, c-format msgid "Vertical refresh rate" msgstr "" #: Xconfig/resolution_and_depth.pm:10 #, c-format msgid "256 colors (8 bits)" msgstr "256 rang (8 bit)" #: Xconfig/resolution_and_depth.pm:11 #, c-format msgid "32 thousand colors (15 bits)" msgstr "32 mingta rang (15 bit)" #: Xconfig/resolution_and_depth.pm:12 #, c-format msgid "65 thousand colors (16 bits)" msgstr "65 mingta rang (16 bit)" #: Xconfig/resolution_and_depth.pm:13 #, c-format msgid "16 million colors (24 bits)" msgstr "16 millionta rang (24 bit)" #: Xconfig/resolution_and_depth.pm:127 #, c-format msgid "Resolutions" msgstr "O'lchamlar" #: Xconfig/resolution_and_depth.pm:308 diskdrake/hd_gtk.pm:336 #: install_steps_gtk.pm:284 mouse.pm:168 services.pm:162 #: standalone/drakbackup:1583 standalone/drakperm:250 #, c-format msgid "Other" msgstr "Boshqa" #: Xconfig/resolution_and_depth.pm:357 #, c-format msgid "Choose the resolution and the color depth" msgstr "" #: Xconfig/resolution_and_depth.pm:358 #, c-format msgid "Graphics card: %s" msgstr "Grafik karta: %s" #: Xconfig/resolution_and_depth.pm:372 interactive.pm:432 #: interactive/gtk.pm:807 interactive/http.pm:103 interactive/http.pm:156 #: interactive/newt.pm:321 interactive/newt.pm:424 interactive/stdio.pm:39 #: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172 #: standalone/drakTermServ:200 standalone/drakTermServ:518 #: standalone/drakbackup:1347 standalone/drakbackup:3961 #: standalone/drakbackup:4021 standalone/drakbackup:4065 #: standalone/drakconnect:158 standalone/drakconnect:848 #: standalone/drakconnect:935 standalone/drakconnect:1031 #: standalone/drakfont:574 standalone/drakfont:586 standalone/drakroam:392 #: standalone/draksplash:169 standalone/drakups:212 standalone/net_monitor:340 #: ugtk2.pm:409 ugtk2.pm:506 ugtk2.pm:908 ugtk2.pm:931 #, c-format msgid "Ok" msgstr "Ok" #: Xconfig/resolution_and_depth.pm:372 diskdrake/smbnfs_gtk.pm:80 help.pm:89 #: help.pm:444 install_steps_gtk.pm:480 install_steps_interactive.pm:422 #: install_steps_interactive.pm:831 interactive.pm:433 interactive/gtk.pm:811 #: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318 #: interactive/newt.pm:428 interactive/stdio.pm:39 interactive/stdio.pm:142 #: interactive/stdio.pm:176 printer/printerdrake.pm:3676 #: standalone/drakautoinst:215 standalone/drakbackup:1347 #: standalone/drakbackup:3887 standalone/drakbackup:3891 #: standalone/drakbackup:3949 standalone/drakconnect:157 #: standalone/drakconnect:933 standalone/drakconnect:1030 #: standalone/drakfont:586 standalone/drakfont:664 standalone/drakfont:741 #: standalone/draksplash:169 standalone/drakups:219 standalone/logdrake:173 #: standalone/net_monitor:339 ugtk2.pm:403 ugtk2.pm:504 ugtk2.pm:513 #: ugtk2.pm:908 #, c-format msgid "Cancel" msgstr "Bekor qilish" #: Xconfig/resolution_and_depth.pm:372 diskdrake/hd_gtk.pm:150 #: install_steps_gtk.pm:228 install_steps_gtk.pm:629 interactive.pm:527 #: interactive/gtk.pm:677 interactive/gtk.pm:679 standalone/drakTermServ:285 #: standalone/drakbackup:3883 standalone/drakbug:105 #: standalone/drakconnect:153 standalone/drakconnect:236 #: standalone/drakfont:509 standalone/draknfs:208 standalone/drakperm:133 #: standalone/draksec:336 standalone/draksec:338 standalone/draksec:356 #: standalone/draksec:358 ugtk2.pm:1040 ugtk2.pm:1041 #, c-format msgid "Help" msgstr "Yordam" #: Xconfig/test.pm:30 #, c-format msgid "Test of the configuration" msgstr "Moslamalarni sinab ko'rish" #: Xconfig/test.pm:31 #, c-format msgid "Do you want to test the configuration?" msgstr "Moslamalarni sinab ko'rishni istaysizmi?" #: Xconfig/test.pm:31 #, c-format msgid "Warning: testing this graphic card may freeze your computer" msgstr "" "Diqqat: bu grafik kartani sinab ko'rish kompyuterni qotib qolishiga olib " "kelishi mumkin" #: Xconfig/test.pm:69 #, c-format msgid "" "An error occurred:\n" "%s\n" "Try to change some parameters" msgstr "" "Xato ro'y berdi:\n" "%s\n" "Ba'zi bir parametrlarni o'zgartirib sinab ko'ring" #: Xconfig/test.pm:129 #, c-format msgid "Leaving in %d seconds" msgstr "%d soniyadan keyin yopiladi" #: Xconfig/test.pm:129 #, c-format msgid "Is this the correct setting?" msgstr "Bu to'g'rimi?" #: Xconfig/various.pm:29 #, c-format msgid "Keyboard layout: %s\n" msgstr "Tugmalar tartibi: %s\n" #: Xconfig/various.pm:30 #, c-format msgid "Mouse type: %s\n" msgstr "Sichqonchaning turi: %s\n" #: Xconfig/various.pm:31 #, c-format msgid "Mouse device: %s\n" msgstr "Sichqonchaning uskunasi: %s\n" #: Xconfig/various.pm:33 #, c-format msgid "Monitor: %s\n" msgstr "Monitor: %s\n" #: Xconfig/various.pm:34 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "Monitorning HorizSync: %s\n" #: Xconfig/various.pm:35 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "Monitorning VertRefresh: %s\n" #: Xconfig/various.pm:37 #, c-format msgid "Graphics card: %s\n" msgstr "Grafik karta: %s\n" #: Xconfig/various.pm:38 #, c-format msgid "Graphics memory: %s kB\n" msgstr "Grafik xotiraning hajmi: %s Kb\n" #: Xconfig/various.pm:40 #, c-format msgid "Color depth: %s\n" msgstr "" #: Xconfig/various.pm:41 #, c-format msgid "Resolution: %s\n" msgstr "O'lchamlar: %s\n" #: Xconfig/various.pm:43 #, c-format msgid "Xorg driver: %s\n" msgstr "Xorg drayveri: %s\n" #: Xconfig/various.pm:72 #, c-format msgid "Graphical interface at startup" msgstr "Tizim yuklanayotganda grafik interfeys" #: Xconfig/various.pm:74 #, c-format msgid "" "I can setup your computer to automatically start the graphical interface " "(Xorg) upon booting.\n" "Would you like Xorg to start when you reboot?" msgstr "" "Men kompyuteringizni shunday o'rnatishim mumkinki, tizim yuklanayotganda " "grafik interfeys (Xorg) ishga tushiriladi.\n" "O'chirib-yoqgandan keyin Xorg ishga tushirilishini istaysizmi?" #: Xconfig/various.pm:87 #, c-format msgid "" "Your graphic card seems to have a TV-OUT connector.\n" "It can be configured to work using frame-buffer.\n" "\n" "For this you have to plug your graphic card to your TV before booting your " "computer.\n" "Then choose the \"TVout\" entry in the bootloader\n" "\n" "Do you have this feature?" msgstr "" #: Xconfig/various.pm:99 #, c-format msgid "What norm is your TV using?" msgstr "" #: Xconfig/xfree.pm:646 #, c-format msgid "" "_:weird aspect ratio\n" "other" msgstr "" #: any.pm:142 harddrake/sound.pm:190 interactive.pm:470 pkgs.pm:458 #: standalone/drakconnect:160 standalone/drakconnect:635 standalone/draksec:68 #: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:245 #: standalone/service_harddrake:206 #, c-format msgid "Please wait" msgstr "Iltimos kutib turing" #: any.pm:142 #, c-format msgid "Bootloader installation in progress" msgstr "Operatsion tizim yuklagichini o'rnatish davom etmoqda" #: any.pm:153 #, c-format msgid "" "LILO wants to assign a new Volume ID to drive %s. However, changing\n" "the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows " "error.\n" "This caution does not apply to Windows 95 or 98, or to NT data disks.\n" "\n" "Assign a new Volume ID?" msgstr "" #: any.pm:164 #, c-format msgid "Installation of bootloader failed. The following error occurred:" msgstr "" "Operatsion tizim yuklagichini o'rnatish muvaffaqiyatsiz tugadi. Quyidagi " "xato ro'y berdi:" #: any.pm:170 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you do not see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" #: any.pm:208 #, c-format msgid "" "You decided to install the bootloader on a partition.\n" "This implies you already have a bootloader on the hard drive you boot (eg: " "System Commander).\n" "\n" "On which drive are you booting?" msgstr "" #: any.pm:231 help.pm:739 #, c-format msgid "First sector of drive (MBR)" msgstr "Diskning birinchi sektori (MRB)" #: any.pm:232 #, c-format msgid "First sector of the root partition" msgstr "Tub qismining birinchi sektori" #: any.pm:234 #, c-format msgid "On Floppy" msgstr "Disketga" #: any.pm:236 help.pm:739 printer/printerdrake.pm:4061 #, c-format msgid "Skip" msgstr "O'tkazib yuborish" #: any.pm:240 #, c-format msgid "LILO/grub Installation" msgstr "LILO/grub dasturini o'rnatish" #: any.pm:241 #, c-format msgid "Where do you want to install the bootloader?" msgstr "Operatsion tizim yuklagichini qaerga o'rnatmoqchisiz?" #: any.pm:267 standalone/drakboot:261 #, c-format msgid "Boot Style Configuration" msgstr "Tizimni yukash uslubini moslash" #: any.pm:269 any.pm:301 #, c-format msgid "Bootloader main options" msgstr "Operatsion tizim yuklagichining asosiy parametrlari" #: any.pm:273 #, c-format msgid "Give the ram size in MB" msgstr "RAM'ning hajmini kiriting (Mb)" #: any.pm:275 #, c-format msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "" #: any.pm:276 any.pm:609 authentication.pm:181 #, c-format msgid "The passwords do not match" msgstr "Maxfiy so'zlar mos kelmaydi" #: any.pm:276 any.pm:609 authentication.pm:181 diskdrake/interactive.pm:1306 #, c-format msgid "Please try again" msgstr "Iltimos yana urinib ko'ring" #: any.pm:281 any.pm:304 #, c-format msgid "Bootloader to use" msgstr "OT yuklagichi" #: any.pm:283 any.pm:306 #, c-format msgid "Boot device" msgstr "Tizimni yuklash uskunasi" #: any.pm:285 #, c-format msgid "Delay before booting default image" msgstr "Andoza tasvirni yuklashdan oldin kutish vaqti" #: any.pm:286 #, c-format msgid "Enable ACPI" msgstr "ACPI'ni yoqish" #: any.pm:288 #, c-format msgid "Force no APIC" msgstr "APIC'ni taqiqlash" #: any.pm:290 #, c-format msgid "Force No Local APIC" msgstr "" #: any.pm:292 any.pm:643 authentication.pm:186 diskdrake/smbnfs_gtk.pm:179 #: network/netconnect.pm:573 printer/printerdrake.pm:1663 #: printer/printerdrake.pm:1784 standalone/drakbackup:1627 #: standalone/drakbackup:3490 standalone/drakups:299 #, c-format msgid "Password" msgstr "Maxfiy so'z" #: any.pm:293 any.pm:644 authentication.pm:187 #, c-format msgid "Password (again)" msgstr "Maxfiy so'z (yana)" #: any.pm:294 #, c-format msgid "Restrict command line options" msgstr "" #: any.pm:294 #, c-format msgid "restrict" msgstr "chegaralash" #: any.pm:296 #, c-format msgid "Clean /tmp at each boot" msgstr "Tizimni yuklashda /tmp direktoriyasini bo'shatish" #: any.pm:297 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "Kerak bo'lsa, RAM'ning aniq hajmi (%d Mb topildi)" #: any.pm:305 #, c-format msgid "Init Message" msgstr "" #: any.pm:307 #, c-format msgid "Open Firmware Delay" msgstr "" #: any.pm:308 #, c-format msgid "Kernel Boot Timeout" msgstr "" #: any.pm:309 #, c-format msgid "Enable CD Boot?" msgstr "" #: any.pm:310 #, c-format msgid "Enable OF Boot?" msgstr "" #: any.pm:311 #, c-format msgid "Default OS?" msgstr "Andoza OT?" #: any.pm:364 #, c-format msgid "Image" msgstr "Rasm" #: any.pm:365 any.pm:375 #, c-format msgid "Root" msgstr "Diskning tub qismi" #: any.pm:366 any.pm:388 #, c-format msgid "Append" msgstr "" #: any.pm:368 standalone/drakboot:263 standalone/drakboot:267 #, c-format msgid "Video mode" msgstr "Video usuli" #: any.pm:370 #, c-format msgid "Initrd" msgstr "Initrd" #: any.pm:371 #, c-format msgid "Network profile" msgstr "Tarmoqning profili" #: any.pm:380 any.pm:385 any.pm:387 #, c-format msgid "Label" msgstr "Belgi" #: any.pm:382 any.pm:392 harddrake/v4l.pm:358 standalone/draksec:52 #, c-format msgid "Default" msgstr "Andoza" #: any.pm:389 #, c-format msgid "Initrd-size" msgstr "Initrd'ning hajmi" #: any.pm:391 #, c-format msgid "NoVideo" msgstr "Videosiz" #: any.pm:402 #, c-format msgid "Empty label not allowed" msgstr "Bo'sh belgini ishlatish mumkin emas" #: any.pm:403 #, c-format msgid "You must specify a kernel image" msgstr "Kernelning tasvirini ko'rsatishingiz kerak." #: any.pm:403 #, c-format msgid "You must specify a root partition" msgstr "Diskning tub qismini kiritishingiz shart" #: any.pm:404 #, c-format msgid "This label is already used" msgstr "Belgi allaqachon ishlatilgan" #: any.pm:418 #, c-format msgid "Which type of entry do you want to add?" msgstr "Bandning qaysi turini qo'shmoqchisiz?" #: any.pm:419 #, c-format msgid "Linux" msgstr "Linux" #: any.pm:419 #, c-format msgid "Other OS (SunOS...)" msgstr "Boshqa OT (SunOS...)" #: any.pm:420 #, c-format msgid "Other OS (MacOS...)" msgstr "Boshqa OT (MacOS...)" #: any.pm:420 #, c-format msgid "Other OS (Windows...)" msgstr "Boshqa OT (Windows...)" #: any.pm:448 #, c-format msgid "" "Here are the entries on your boot menu so far.\n" "You can create additional entries or change the existing ones." msgstr "" "Tizimni yuklash menyusining bandlari.\n" "Qo'shimcha bandlar yaratishingiz yoki mavjud bo'lgan bandlarni " "o'zgartirishingiz mumkin." #: any.pm:595 #, c-format msgid "access to X programs" msgstr "X dasturlaridan foydalanishga ruxsat etish" #: any.pm:596 #, c-format msgid "access to rpm tools" msgstr "RPM vositalaridan foydalanishga ruxsat etish" #: any.pm:597 #, c-format msgid "allow \"su\"" msgstr "\"su\" buyrug'idan foydalanishga ruxsat etish" #: any.pm:598 #, c-format msgid "access to administrative files" msgstr "boshqaruv fayllariga ruxsat" #: any.pm:599 #, c-format msgid "access to network tools" msgstr "tarmoq vositalardan foydalanishni ruxsat etish" #: any.pm:600 #, c-format msgid "access to compilation tools" msgstr "" #: any.pm:605 #, c-format msgid "(already added %s)" msgstr "(%s allaqachon qo'shilgan)" #: any.pm:610 #, c-format msgid "This password is too simple" msgstr "Bu maxfiy so'z juda oddiy" #: any.pm:611 #, c-format msgid "Please give a user name" msgstr "Iltimos foydalanuvchining ismini kiriting" #: any.pm:612 #, c-format msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "" "Foydalanuvchining ismi faqat kichkina harf, son, \"-\" va \"_\" belgilaridan " "iborat bo'lishi shart" #: any.pm:613 #, c-format msgid "The user name is too long" msgstr "Foydalanuvchining ismi juda uzun" #: any.pm:614 #, c-format msgid "This user name has already been added" msgstr "Foydalanuvchining ismi allaqachon qo'shilgan" #: any.pm:615 any.pm:646 #, c-format msgid "User ID" msgstr "Foydalanuvchining ID'si" #: any.pm:616 any.pm:647 #, c-format msgid "Group ID" msgstr "Guruhning ID'si" #: any.pm:619 #, fuzzy, c-format msgid "%s must be a number" msgstr "Parametr %s son bo'lishi kerak!" #: any.pm:620 #, c-format msgid "%s should be above 500. Accept anyway?" msgstr "" #: any.pm:625 #, c-format msgid "Add user" msgstr "Foydalanuvchini qo'shish" #: any.pm:626 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" "Foydalanuvchini kiriting\n" "%s" #: any.pm:629 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:154 #: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:81 help.pm:530 #: interactive/http.pm:151 printer/printerdrake.pm:197 #: printer/printerdrake.pm:382 printer/printerdrake.pm:4853 #: standalone/drakbackup:2703 standalone/scannerdrake:668 #: standalone/scannerdrake:818 #, c-format msgid "Done" msgstr "Tayyor" #: any.pm:630 help.pm:51 #, c-format msgid "Accept user" msgstr "Qabul qilish" #: any.pm:641 #, c-format msgid "Real name" msgstr "Foydalanuvchining haqiqiy ismi-sharifi" #: any.pm:642 standalone/drakbackup:1622 #, c-format msgid "Login name" msgstr "Foydalanuvchi" #: any.pm:645 #, c-format msgid "Shell" msgstr "Konsol" #: any.pm:649 #, c-format msgid "Icon" msgstr "Nishoncha" #: any.pm:696 security/l10n.pm:14 #, c-format msgid "Autologin" msgstr "Tizimga avtomatik ravishda kirish" #: any.pm:697 #, c-format msgid "I can set up your computer to automatically log on one user." msgstr "" "Kompyuterni bitta foydalanuvchi avtomatik ravishda kirishga moslash mumkin." #: any.pm:698 #, fuzzy, c-format msgid "Use this feature" msgstr "Bu qulaylikdan foydalanishni istaysizmi?" #: any.pm:699 #, c-format msgid "Choose the default user:" msgstr "Andoza foydalanuvchini tanlang:" #: any.pm:700 #, c-format msgid "Choose the window manager to run:" msgstr "Oynalar boshqaruvchisini tanlang:" #: any.pm:712 any.pm:779 #, c-format msgid "Please choose a language to use." msgstr "Iltimos foydalanish uchun tilni tanlang." #: any.pm:713 any.pm:780 #, c-format msgid "Language choice" msgstr "Tilni tanlash" #: any.pm:740 #, c-format msgid "" "Mandriva Linux can support multiple languages. Select\n" "the languages you would like to install. They will be available\n" "when your installation is complete and you restart your system." msgstr "" #: any.pm:759 any.pm:788 help.pm:647 #, c-format msgid "Use Unicode by default" msgstr "Andoza sifatida Yunikoddan foydalanish" #: any.pm:760 help.pm:647 #, c-format msgid "All languages" msgstr "Hamma tillar" #: any.pm:835 help.pm:566 help.pm:855 install_steps_interactive.pm:952 #, c-format msgid "Country / Region" msgstr "Davlat / Region" #: any.pm:836 #, c-format msgid "Please choose your country." msgstr "Davlatingizni tanlang." #: any.pm:838 #, c-format msgid "Here is the full list of available countries" msgstr "Mavjud bo'lgan davlatlarning to'liq ro'yxati" #: any.pm:839 #, c-format msgid "Other Countries" msgstr "Boshqa davlatlar" #: any.pm:839 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722 #: interactive.pm:393 #, c-format msgid "Advanced" msgstr "Qo'shimcha" #: any.pm:847 #, c-format msgid "Input method:" msgstr "Kiritish usuli:" #: any.pm:848 install_any.pm:421 network/netconnect.pm:154 #: network/netconnect.pm:314 network/netconnect.pm:319 #: network/netconnect.pm:1177 printer/printerdrake.pm:105 #: printer/printerdrake.pm:2199 #, c-format msgid "None" msgstr "Yo'q" #: any.pm:963 #, c-format msgid "No sharing" msgstr "" #: any.pm:963 #, c-format msgid "Allow all users" msgstr "Hamma foydalanuvchilarga ruxsat" #: any.pm:967 #, c-format msgid "" "Would you like to allow users to share some of their directories?\n" "Allowing this will permit users to simply click on \"Share\" in konqueror " "and nautilus.\n" "\n" "\"Custom\" permit a per-user granularity.\n" msgstr "" #: any.pm:979 #, c-format msgid "" "NFS: the traditional Unix file sharing system, with less support on Mac and " "Windows." msgstr "" #: any.pm:982 #, c-format msgid "" "SMB: a file sharing system used by Windows, Mac OS X and many modern Linux " "systems." msgstr "" #: any.pm:990 #, c-format msgid "" "You can export using NFS or SMB. Please select which you would like to use." msgstr "" "Siz NFS yoki Samba yordamida eksport qilishingiz mumkin. Iltimos bittasini " "tanlang." #: any.pm:1015 #, c-format msgid "Launch userdrake" msgstr "Userdrake dasturini ishga tushirish" #: any.pm:1015 printer/printerdrake.pm:3900 printer/printerdrake.pm:3903 #: printer/printerdrake.pm:3904 printer/printerdrake.pm:3905 #: printer/printerdrake.pm:5162 standalone/drakTermServ:295 #: standalone/drakbackup:4083 standalone/drakbug:126 standalone/drakfont:497 #: standalone/drakroam:242 standalone/net_monitor:118 #: standalone/printerdrake:547 #, c-format msgid "Close" msgstr "Yopish" #: any.pm:1017 #, c-format msgid "" "The per-user sharing uses the group \"fileshare\". \n" "You can use userdrake to add a user to this group." msgstr "" #: authentication.pm:23 #, c-format msgid "Local file" msgstr "Lokal fayl" #: authentication.pm:24 #, c-format msgid "LDAP" msgstr "LDAP" #: authentication.pm:25 #, c-format msgid "NIS" msgstr "NIS" #: authentication.pm:26 #, c-format msgid "Smart Card" msgstr "" #: authentication.pm:27 authentication.pm:152 #, c-format msgid "Windows Domain" msgstr "" #: authentication.pm:28 #, c-format msgid "Active Directory with SFU" msgstr "" #: authentication.pm:29 #, c-format msgid "Active Directory with Winbind" msgstr "" #: authentication.pm:55 #, c-format msgid "Local file:" msgstr "Lokal fayl:" #: authentication.pm:55 #, c-format msgid "" "Use local for all authentication and information user tell in local file" msgstr "" #: authentication.pm:56 #, c-format msgid "LDAP:" msgstr "LDAP:" #: authentication.pm:56 #, c-format msgid "" "Tells your computer to use LDAP for some or all authentication. LDAP " "consolidates certain types of information within your organization." msgstr "" #: authentication.pm:57 #, c-format msgid "NIS:" msgstr "NIS:" #: authentication.pm:57 #, c-format msgid "" "Allows you to run a group of computers in the same Network Information " "Service domain with a common password and group file." msgstr "" #: authentication.pm:58 #, c-format msgid "Windows Domain:" msgstr "Windows domeni:" #: authentication.pm:58 #, c-format msgid "" "Winbind allows the system to retrieve information and authenticate users in " "a Windows domain." msgstr "" #: authentication.pm:59 #, c-format msgid "Active Directory with SFU:" msgstr "" #: authentication.pm:59 authentication.pm:60 #, c-format msgid "" "Kerberos is a secure system for providing network authentication services." msgstr "" #: authentication.pm:60 #, c-format msgid "Active Directory with Winbind:" msgstr "" #: authentication.pm:85 #, c-format msgid "Authentication LDAP" msgstr "Tasdiqlovchi LDAP" #: authentication.pm:86 #, fuzzy, c-format msgid "LDAP Base dn" msgstr "LDAP maxfiy so'z:" #: authentication.pm:87 share/compssUsers.pl:102 #, c-format msgid "LDAP Server" msgstr "LDAP serveri" #: authentication.pm:100 fsedit.pm:23 #, c-format msgid "simple" msgstr "oson" #: authentication.pm:101 #, c-format msgid "TLS" msgstr "TLS" #: authentication.pm:102 #, c-format msgid "SSL" msgstr "" #: authentication.pm:103 #, c-format msgid "security layout (SASL/Kerberos)" msgstr "" #: authentication.pm:110 authentication.pm:148 #, c-format msgid "Authentication Active Directory" msgstr "" #: authentication.pm:111 authentication.pm:150 diskdrake/smbnfs_gtk.pm:180 #, c-format msgid "Domain" msgstr "Domen" #: authentication.pm:113 diskdrake/dav.pm:63 help.pm:146 #: printer/printerdrake.pm:141 share/compssUsers.pl:82 #: standalone/drakTermServ:270 #, c-format msgid "Server" msgstr "Server" #: authentication.pm:114 #, fuzzy, c-format msgid "LDAP users database" msgstr "Ma'lumot bazasi" #: authentication.pm:115 #, c-format msgid "Use Anonymous BIND " msgstr "" #: authentication.pm:116 #, c-format msgid "LDAP user allowed to browse the Active Directory" msgstr "" #: authentication.pm:117 #, c-format msgid "Password for user" msgstr "Foydalanuvchi uchun maxfiy so'z" #: authentication.pm:118 #, c-format msgid "Encryption" msgstr "Kodlash" #: authentication.pm:129 #, c-format msgid "Authentication NIS" msgstr "Tasdiqlovchi NIS" #: authentication.pm:130 #, c-format msgid "NIS Domain" msgstr "NIS domeni" #: authentication.pm:131 #, c-format msgid "NIS Server" msgstr "NIS serveri" #: authentication.pm:136 #, c-format msgid "" "For this to work for a W2K PDC, you will probably need to have the admin " "run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" "add and reboot the server.\n" "You will also need the username/password of a Domain Admin to join the " "machine to the Windows(TM) domain.\n" "If networking is not yet enabled, Drakx will attempt to join the domain " "after the network setup step.\n" "Should this setup fail for some reason and domain authentication is not " "working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) " "Domain, and Admin Username/Password, after system boot.\n" "The command 'wbinfo -t' will test whether your authentication secrets are " "good." msgstr "" #: authentication.pm:148 #, c-format msgid "Authentication Windows Domain" msgstr "" #: authentication.pm:153 #, c-format msgid "Domain Admin User Name" msgstr "" #: authentication.pm:154 #, c-format msgid "Domain Admin Password" msgstr "" #: authentication.pm:155 #, c-format msgid "Use Idmap for store UID/SID " msgstr "" #: authentication.pm:156 #, c-format msgid "Default Idmap " msgstr "Andoza Idmap " #: authentication.pm:170 #, c-format msgid "Set administrator (root) password and network authentication methods" msgstr "" #: authentication.pm:171 #, fuzzy, c-format msgid "Set administrator (root) password" msgstr "Root uchun maxfiy so'z" #: authentication.pm:172 standalone/drakvpn:1111 #, c-format msgid "Authentication method" msgstr "Tasdiqlash usuli" #. -PO: keep this short or else the buttons will not fit in the window #: authentication.pm:177 help.pm:722 #, c-format msgid "No password" msgstr "Maxfiy so'zsiz" #: authentication.pm:183 #, c-format msgid "This password is too short (it must be at least %d characters long)" msgstr "" "Bu maxfiy so'z juda qisqa (u eng kami %d belgidan iborat bo'lishi shart)" #: authentication.pm:188 network/netconnect.pm:319 network/netconnect.pm:574 #: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:481 #, c-format msgid "Authentication" msgstr "Tasdiqlash" #: authentication.pm:307 #, c-format msgid "Can not use broadcast with no NIS domain" msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: bootloader.pm:753 #, c-format msgid "" "Welcome to the operating system chooser!\n" "\n" "Choose an operating system from the list above or\n" "wait for default boot.\n" "\n" msgstr "" "Operatsion tizimni tanlash dasturiga marhamat!\n" "\n" "Yuqoridagi ro'yxatdan operasion tizimni tanlang\n" "yoki andoza uchun kutib turing.\n" "\n" #: bootloader.pm:853 #, c-format msgid "LILO with graphical menu" msgstr "LILO (grafik menyu)" #: bootloader.pm:854 #, c-format msgid "LILO with text menu" msgstr "LILO (matn menyu)" #: bootloader.pm:855 #, c-format msgid "Grub with graphical menu" msgstr "" #: bootloader.pm:856 #, c-format msgid "Grub with text menu" msgstr "" #: bootloader.pm:857 #, c-format msgid "Yaboot" msgstr "Yaboot" #: bootloader.pm:935 #, c-format msgid "not enough room in /boot" msgstr "/boot direktoriyasida etarli joy yo'q" #: bootloader.pm:1414 #, c-format msgid "You can not install the bootloader on a %s partition\n" msgstr "Operatsion tizim yuklagichini diskning %s qismiga o'rnatib bo'lmaydi\n" #: bootloader.pm:1448 #, c-format msgid "" "Your bootloader configuration must be updated because partition has been " "renumbered" msgstr "" #: bootloader.pm:1461 #, c-format msgid "" "The bootloader can not be installed correctly. You have to boot rescue and " "choose \"%s\"" msgstr "" #: bootloader.pm:1462 #, c-format msgid "Re-install Boot Loader" msgstr "OT yuklagichini qaytadan o'rnatish" #: common.pm:131 #, c-format msgid "KB" msgstr "Kb" #: common.pm:131 #, c-format msgid "MB" msgstr "Mb" #: common.pm:131 #, c-format msgid "GB" msgstr "Gb" #: common.pm:139 #, c-format msgid "TB" msgstr "Tb" #: common.pm:147 #, c-format msgid "%d minutes" msgstr "%d minut" #: common.pm:149 #, c-format msgid "1 minute" msgstr "1 minut" #: common.pm:151 #, c-format msgid "%d seconds" msgstr "%d soniya" #: common.pm:253 #, c-format msgid "kdesu missing" msgstr "kdesu dasturi etishmayapti" #: common.pm:256 #, c-format msgid "consolehelper missing" msgstr "consolehelper dasturi etishmayapti" #: crypto.pm:13 crypto.pm:48 lang.pm:207 network/adsl_consts.pm:66 #: network/adsl_consts.pm:75 network/adsl_consts.pm:84 #, c-format msgid "Austria" msgstr "Avstriya" #: crypto.pm:14 crypto.pm:47 lang.pm:208 standalone/drakxtv:48 #, c-format msgid "Australia" msgstr "Avstraliya" #: crypto.pm:15 crypto.pm:49 lang.pm:214 network/adsl_consts.pm:93 #: network/adsl_consts.pm:102 network/adsl_consts.pm:114 #: network/adsl_consts.pm:123 network/netconnect.pm:44 #, c-format msgid "Belgium" msgstr "Belgiya" #: crypto.pm:16 crypto.pm:50 lang.pm:223 network/adsl_consts.pm:132 #: network/adsl_consts.pm:143 network/adsl_consts.pm:152 #: network/adsl_consts.pm:161 #, c-format msgid "Brazil" msgstr "Braziliya" #: crypto.pm:17 crypto.pm:51 lang.pm:230 #, c-format msgid "Canada" msgstr "Kanada" #: crypto.pm:18 crypto.pm:74 lang.pm:235 network/adsl_consts.pm:891 #: network/adsl_consts.pm:900 network/adsl_consts.pm:911 #, c-format msgid "Switzerland" msgstr "Shveytsariya" #: crypto.pm:19 lang.pm:242 #, c-format msgid "Costa Rica" msgstr "Kosta Rika" #: crypto.pm:20 crypto.pm:52 lang.pm:248 network/adsl_consts.pm:368 #, c-format msgid "Czech Republic" msgstr "Chex Respublikasi" #: crypto.pm:21 crypto.pm:57 lang.pm:249 network/adsl_consts.pm:499 #: network/adsl_consts.pm:508 #, c-format msgid "Germany" msgstr "Olmoniya" #: crypto.pm:22 crypto.pm:53 lang.pm:251 network/adsl_consts.pm:378 #, c-format msgid "Denmark" msgstr "Daniya" #: crypto.pm:23 crypto.pm:54 lang.pm:256 #, c-format msgid "Estonia" msgstr "Estoniya" #: crypto.pm:24 crypto.pm:72 lang.pm:260 network/adsl_consts.pm:759 #: network/adsl_consts.pm:770 network/adsl_consts.pm:781 #: network/adsl_consts.pm:792 network/adsl_consts.pm:801 #: network/adsl_consts.pm:810 network/adsl_consts.pm:819 #: network/adsl_consts.pm:828 network/adsl_consts.pm:837 #: network/adsl_consts.pm:846 network/adsl_consts.pm:855 #: network/adsl_consts.pm:864 network/adsl_consts.pm:873 #, c-format msgid "Spain" msgstr "Ispaniya" #: crypto.pm:25 crypto.pm:55 lang.pm:262 network/adsl_consts.pm:387 #, c-format msgid "Finland" msgstr "Finlyandiya" #: crypto.pm:26 crypto.pm:56 lang.pm:267 network/adsl_consts.pm:396 #: network/adsl_consts.pm:408 network/adsl_consts.pm:420 #: network/adsl_consts.pm:431 network/adsl_consts.pm:442 #: network/adsl_consts.pm:454 network/adsl_consts.pm:466 #: network/adsl_consts.pm:477 network/adsl_consts.pm:488 #: network/netconnect.pm:41 #, c-format msgid "France" msgstr "Frantsiya" #: crypto.pm:27 crypto.pm:58 lang.pm:280 network/adsl_consts.pm:519 #, c-format msgid "Greece" msgstr "Gretsiya" #: crypto.pm:28 crypto.pm:59 lang.pm:291 network/adsl_consts.pm:528 #, c-format msgid "Hungary" msgstr "Vengriya" #: crypto.pm:29 crypto.pm:60 lang.pm:293 network/adsl_consts.pm:537 #: standalone/drakxtv:47 #, c-format msgid "Ireland" msgstr "Irlandiya" #: crypto.pm:30 crypto.pm:61 lang.pm:294 network/adsl_consts.pm:546 #, c-format msgid "Israel" msgstr "Isroil" #: crypto.pm:31 crypto.pm:62 lang.pm:300 network/adsl_consts.pm:557 #: network/adsl_consts.pm:569 network/adsl_consts.pm:580 #: network/adsl_consts.pm:589 network/netconnect.pm:43 standalone/drakxtv:47 #, c-format msgid "Italy" msgstr "Italiya" #: crypto.pm:32 crypto.pm:63 lang.pm:303 #, c-format msgid "Japan" msgstr "Yaponiya" #: crypto.pm:33 crypto.pm:64 lang.pm:352 network/adsl_consts.pm:620 #: network/adsl_consts.pm:629 network/adsl_consts.pm:638 #: network/adsl_consts.pm:647 network/netconnect.pm:42 #, c-format msgid "Netherlands" msgstr "Niderlandlar" #: crypto.pm:34 crypto.pm:66 lang.pm:353 network/adsl_consts.pm:656 #: network/adsl_consts.pm:661 network/adsl_consts.pm:666 #: network/adsl_consts.pm:671 network/adsl_consts.pm:676 #: network/adsl_consts.pm:681 network/adsl_consts.pm:686 #, c-format msgid "Norway" msgstr "Norvegiya" #: crypto.pm:35 crypto.pm:65 lang.pm:357 #, c-format msgid "New Zealand" msgstr "Yangi Zelandiya" #: crypto.pm:36 crypto.pm:67 lang.pm:365 network/adsl_consts.pm:693 #: network/adsl_consts.pm:704 #, c-format msgid "Poland" msgstr "Polsha" #: crypto.pm:37 crypto.pm:68 lang.pm:370 network/adsl_consts.pm:716 #, c-format msgid "Portugal" msgstr "Portugaliya" #: crypto.pm:38 crypto.pm:69 lang.pm:376 network/adsl_consts.pm:725 #, c-format msgid "Russia" msgstr "Rossiya" #: crypto.pm:39 crypto.pm:73 lang.pm:382 network/adsl_consts.pm:882 #, c-format msgid "Sweden" msgstr "Shvetsiya" #: crypto.pm:40 crypto.pm:70 lang.pm:387 #, c-format msgid "Slovakia" msgstr "Slovakiya" #: crypto.pm:41 crypto.pm:76 lang.pm:401 network/adsl_consts.pm:920 #, c-format msgid "Thailand" msgstr "Tailand" #: crypto.pm:42 crypto.pm:75 lang.pm:411 #, c-format msgid "Taiwan" msgstr "Tayvan" #: crypto.pm:43 crypto.pm:71 lang.pm:430 standalone/drakxtv:49 #, c-format msgid "South Africa" msgstr "Janubiy Afrika" #: crypto.pm:77 crypto.pm:107 lang.pm:416 network/netconnect.pm:45 #, c-format msgid "United States" msgstr "Qo'shma Shtatlar" #: diskdrake/dav.pm:17 #, c-format msgid "" "WebDAV is a protocol that allows you to mount a web server's directory\n" "locally, and treat it like a local filesystem (provided the web server is\n" "configured as a WebDAV server). If you would like to add WebDAV mount\n" "points, select \"New\"." msgstr "" #: diskdrake/dav.pm:25 #, c-format msgid "New" msgstr "Yangi" #: diskdrake/dav.pm:61 diskdrake/interactive.pm:454 diskdrake/smbnfs_gtk.pm:74 #, c-format msgid "Unmount" msgstr "Uzish" #: diskdrake/dav.pm:62 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75 #, c-format msgid "Mount" msgstr "Ulash" #: diskdrake/dav.pm:64 diskdrake/interactive.pm:446 #: diskdrake/interactive.pm:670 diskdrake/interactive.pm:689 #: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:78 #, c-format msgid "Mount point" msgstr "Ulash nuqtasi" #: diskdrake/dav.pm:83 #, c-format msgid "Please enter the WebDAV server URL" msgstr "Iltimos WebDAV serverining URL'ini kiriting" #: diskdrake/dav.pm:87 #, c-format msgid "The URL must begin with http:// or https://" msgstr "URL http:// yoki https:// bilan boshlanishi shart" #: diskdrake/dav.pm:109 #, c-format msgid "Server: " msgstr "Server: " #: diskdrake/dav.pm:110 diskdrake/interactive.pm:521 #: diskdrake/interactive.pm:1188 diskdrake/interactive.pm:1266 #, c-format msgid "Mount point: " msgstr "Ulash nuqtasi: " #: diskdrake/dav.pm:111 diskdrake/interactive.pm:1273 #, c-format msgid "Options: %s" msgstr "Parametrlar: %s" #: diskdrake/hd_gtk.pm:92 #, c-format msgid "Please make a backup of your data first" msgstr "Iltimos avvalo ma'lumotlaringizdan zahira nusxa oling" #: diskdrake/hd_gtk.pm:95 #, c-format msgid "" "If you plan to use aboot, be careful to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "" "Agar rejangizda aboot dasturini ishlatish bo'lsa, diskning boshida bo'sh joy " "(2048 sektor etadi)\n" "qoldirish esingizdan chiqmasin" #: diskdrake/hd_gtk.pm:152 help.pm:530 #, c-format msgid "Wizard" msgstr "Yordamchi" #: diskdrake/hd_gtk.pm:185 #, c-format msgid "Choose action" msgstr "Amalni tanlang" #: diskdrake/hd_gtk.pm:189 #, c-format msgid "" "You have one big Microsoft Windows partition.\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" "Diskingiz bitta katta Microsoft Windows qismidan iborat.\n" "Avvalo, uning hajmini o'zgartirishni taklif qilaman\n" "(uni bosing keyin \"Hajmini o'gartirish\" tugmasini bosing)." #: diskdrake/hd_gtk.pm:191 #, c-format msgid "Please click on a partition" msgstr "Iltimos diskning qismini bosing" #: diskdrake/hd_gtk.pm:205 diskdrake/smbnfs_gtk.pm:62 install_steps_gtk.pm:482 #: standalone/drakbackup:2938 standalone/drakbackup:2998 #, c-format msgid "Details" msgstr "Tafsilotlar" #: diskdrake/hd_gtk.pm:251 #, c-format msgid "No hard drives found" msgstr "Qattiq disklar topilmadi" #: diskdrake/hd_gtk.pm:335 #, c-format msgid "Ext2" msgstr "Ext2" #: diskdrake/hd_gtk.pm:335 #, c-format msgid "Journalised FS" msgstr "Jurnalli FS" #: diskdrake/hd_gtk.pm:335 #, c-format msgid "Swap" msgstr "Svop" #: diskdrake/hd_gtk.pm:335 #, c-format msgid "SunOS" msgstr "SunOS" #: diskdrake/hd_gtk.pm:335 #, c-format msgid "HFS" msgstr "HFS" #: diskdrake/hd_gtk.pm:335 #, c-format msgid "Windows" msgstr "Windows" #: diskdrake/hd_gtk.pm:336 diskdrake/interactive.pm:1203 #, c-format msgid "Empty" msgstr "Bo'sh" #: diskdrake/hd_gtk.pm:340 #, c-format msgid "Filesystem types:" msgstr "Fayl tizimning turlari:" #: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:359 diskdrake/hd_gtk.pm:365 #, c-format msgid "Use ``%s'' instead" msgstr "Buning o'rniga \"%s\"ni ishlating" #: diskdrake/hd_gtk.pm:357 diskdrake/interactive.pm:470 #, c-format msgid "Create" msgstr "Yaratish" #: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:365 #: diskdrake/interactive.pm:447 diskdrake/interactive.pm:623 #: diskdrake/removable.pm:25 diskdrake/removable.pm:48 #: standalone/harddrake2:108 standalone/harddrake2:117 #, c-format msgid "Type" msgstr "Turi" #. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE #: diskdrake/hd_gtk.pm:359 diskdrake/interactive.pm:455 #: standalone/drakperm:123 standalone/printerdrake:235 #, c-format msgid "Delete" msgstr "O'chirish" #: diskdrake/hd_gtk.pm:365 #, c-format msgid "Use ``Unmount'' first" msgstr "Avvalo \"Unmount\"ni ishlating" #: diskdrake/interactive.pm:194 #, c-format msgid "Choose another partition" msgstr "Diskning boshqa qismini tanlash" #: diskdrake/interactive.pm:194 #, c-format msgid "Choose a partition" msgstr "Diskning qismini tanlash" #: diskdrake/interactive.pm:223 #, c-format msgid "Exit" msgstr "Chiqish" #: diskdrake/interactive.pm:256 help.pm:530 #, c-format msgid "Undo" msgstr "Bekor qilish" #: diskdrake/interactive.pm:256 #, c-format msgid "Toggle to normal mode" msgstr "Odiy usuliga o'tish" #: diskdrake/interactive.pm:256 #, c-format msgid "Toggle to expert mode" msgstr "Ekspert usuliga o'tish" #: diskdrake/interactive.pm:275 #, c-format msgid "Continue anyway?" msgstr "Bunga qaramasdan davom etishni istaysizmi?" #: diskdrake/interactive.pm:280 #, c-format msgid "Quit without saving" msgstr "Saqlamasdan chiqish" #: diskdrake/interactive.pm:280 #, c-format msgid "Quit without writing the partition table?" msgstr "Diskning qismlar jadvalini saqlamasdan chiqaymi?" #: diskdrake/interactive.pm:285 #, c-format msgid "Do you want to save /etc/fstab modifications" msgstr "/etc/fstab fayliga kiritilgan o'zgarishlarni saqlashni istaysizmi?" #: diskdrake/interactive.pm:292 install_steps_interactive.pm:329 #, c-format msgid "You need to reboot for the partition table modifications to take place" msgstr "" "Diskning qismlar jadvaliga kiritilgan o'zgarishlar kuchga kirishi uchun " "kompyuterni o'chirib-yoqishingiz kerak." #: diskdrake/interactive.pm:297 #, c-format msgid "" "You should format partition %s.\n" "Otherwise no entry for mount point %s will be written in fstab.\n" "Quit anyway?" msgstr "" #: diskdrake/interactive.pm:310 help.pm:530 #, c-format msgid "Clear all" msgstr "Hammasini tozalash" #: diskdrake/interactive.pm:311 help.pm:530 #, c-format msgid "Auto allocate" msgstr "Avto-taqsimlash" #: diskdrake/interactive.pm:312 help.pm:530 help.pm:566 help.pm:606 #: help.pm:855 install_steps_interactive.pm:121 #, c-format msgid "More" msgstr "Ko'proq" #: diskdrake/interactive.pm:317 #, c-format msgid "Hard drive information" msgstr "Qattiq disk haqida ma'lumot" #: diskdrake/interactive.pm:349 #, c-format msgid "All primary partitions are used" msgstr "Diskning hamma asosiy qismlari ishlatilmoqda" #: diskdrake/interactive.pm:350 #, c-format msgid "I can not add any more partitions" msgstr "Boshqa qism qo'shib bo'lmaydi" #: diskdrake/interactive.pm:351 #, c-format msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" "Diskda kengaytirilgan qism yaratish uchun iltimos bitta qismni o'chiring" #: diskdrake/interactive.pm:360 #, c-format msgid "No supermount" msgstr "" #: diskdrake/interactive.pm:361 #, c-format msgid "Supermount" msgstr "" #: diskdrake/interactive.pm:362 #, c-format msgid "Supermount except for CDROM drives" msgstr "" #: diskdrake/interactive.pm:368 help.pm:530 #, c-format msgid "Save partition table" msgstr "Diskning qismlar jadvalini saqlash" #: diskdrake/interactive.pm:369 help.pm:530 #, c-format msgid "Restore partition table" msgstr "Diskning qismlar jadvalini qaytadan tiklash" #: diskdrake/interactive.pm:370 help.pm:530 #, c-format msgid "Rescue partition table" msgstr "" #: diskdrake/interactive.pm:372 help.pm:530 #, c-format msgid "Reload partition table" msgstr "Diskning qismlar jadvalini qaytadan yuklash" #: diskdrake/interactive.pm:374 #, c-format msgid "Removable media automounting" msgstr "" #: diskdrake/interactive.pm:387 diskdrake/interactive.pm:413 #, c-format msgid "Select file" msgstr "Faylni tanlash" #: diskdrake/interactive.pm:399 #, c-format msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" #: diskdrake/interactive.pm:428 #, c-format msgid "Trying to rescue partition table" msgstr "" #: diskdrake/interactive.pm:434 #, c-format msgid "Detailed information" msgstr "Batafsil ma'lumot" #: diskdrake/interactive.pm:449 diskdrake/interactive.pm:760 #, c-format msgid "Resize" msgstr "Hajmini o'zgartirish" #: diskdrake/interactive.pm:450 #, c-format msgid "Format" msgstr "Format qilish" #: diskdrake/interactive.pm:452 #, c-format msgid "Add to RAID" msgstr "RAID'ga qo'shish" #: diskdrake/interactive.pm:453 #, c-format msgid "Add to LVM" msgstr "LVM'ga qo'shish" #: diskdrake/interactive.pm:456 #, c-format msgid "Remove from RAID" msgstr "RAID'dan olib tashlash" #: diskdrake/interactive.pm:457 #, c-format msgid "Remove from LVM" msgstr "LVM'dan olib tashlash" #: diskdrake/interactive.pm:458 #, c-format msgid "Modify RAID" msgstr "RAID'ni o'zgartirish" #: diskdrake/interactive.pm:459 #, c-format msgid "Use for loopback" msgstr "Loopback uchun ishlatish" #: diskdrake/interactive.pm:514 #, c-format msgid "Create a new partition" msgstr "Diskda yangi qism yaratish" #: diskdrake/interactive.pm:517 #, c-format msgid "Start sector: " msgstr "Boshlang'ich sektor: " #: diskdrake/interactive.pm:519 diskdrake/interactive.pm:926 #, c-format msgid "Size in MB: " msgstr "Hajmi (Mb): " #: diskdrake/interactive.pm:520 diskdrake/interactive.pm:927 #, c-format msgid "Filesystem type: " msgstr "Fayl tizimning turi: " #: diskdrake/interactive.pm:525 #, c-format msgid "Preference: " msgstr "Afzal ko'rish: " #: diskdrake/interactive.pm:528 #, c-format msgid "Logical volume name " msgstr "" #: diskdrake/interactive.pm:558 #, c-format msgid "" "You can not create a new partition\n" "(since you reached the maximal number of primary partitions).\n" "First remove a primary partition and create an extended partition." msgstr "" "Yangi qismni yaratib bo'lmaydi.\n" "Chunki siz diskning asosiy qismlarining maksimal soniga etdingiz.\n" "Avvalo diskning asosiy qismini olib tanshlang keyin diskning kengaytirilgan " "qismini yarating." #: diskdrake/interactive.pm:588 #, c-format msgid "Remove the loopback file?" msgstr "Loopback faylini olib tashlaymi?" #: diskdrake/interactive.pm:607 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "" "Diskning %s qismining turini o'zgartirishdan keyin undagi hamma ma'lumot " "yo'qoladi" #: diskdrake/interactive.pm:619 #, c-format msgid "Change partition type" msgstr "Diskning qismining turini o'zgartirish" #: diskdrake/interactive.pm:620 diskdrake/removable.pm:47 #, c-format msgid "Which filesystem do you want?" msgstr "Sizga qanaqa fayl tizimi kerak?" #: diskdrake/interactive.pm:628 #, c-format msgid "Switching from ext2 to ext3" msgstr "Ext2 fayl tizimidan ext3 fayl tizimiga o'tilmoqda" #: diskdrake/interactive.pm:657 #, c-format msgid "Where do you want to mount the loopback file %s?" msgstr "%s loopback faylini qaerga ulamoqchisiz?" #: diskdrake/interactive.pm:658 #, c-format msgid "Where do you want to mount device %s?" msgstr "%s uskunani qaerga ulamoqchisiz?" #: diskdrake/interactive.pm:663 #, c-format msgid "" "Can not unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" #: diskdrake/interactive.pm:688 #, c-format msgid "Where do you want to mount %s?" msgstr "Diskning %s qismini qaerga ulamoqchisiz?" #: diskdrake/interactive.pm:712 diskdrake/interactive.pm:791 #: install_interactive.pm:156 install_interactive.pm:188 #, c-format msgid "Resizing" msgstr "Hajm o'zgartirilmoqda" #: diskdrake/interactive.pm:712 #, c-format msgid "Computing FAT filesystem bounds" msgstr "FAT fayl tizimining bog'lari hisoblanmoqda" #: diskdrake/interactive.pm:748 #, c-format msgid "This partition is not resizeable" msgstr "Diskning bu qismining hajmini o'zgartirib bo'lmaydi" #: diskdrake/interactive.pm:753 #, c-format msgid "All data on this partition should be backed-up" msgstr "" #: diskdrake/interactive.pm:755 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "" "Diskning %s qismining hajmini o'zgartirgandan keyin u erdagi hamma ma'lumot " "yo'qoladi" #: diskdrake/interactive.pm:760 #, c-format msgid "Choose the new size" msgstr "Yangi hajmni tanlang" #: diskdrake/interactive.pm:761 #, c-format msgid "New size in MB: " msgstr "Yangi hajm (Mb): " #: diskdrake/interactive.pm:802 install_interactive.pm:196 #, c-format msgid "" "To ensure data integrity after resizing the partition(s), \n" "filesystem checks will be run on your next boot into Windows(TM)" msgstr "" #: diskdrake/interactive.pm:840 #, c-format msgid "Choose an existing RAID to add to" msgstr "Qo'shish uchun mavjud bo'lgan RAID'ni tanlang" #: diskdrake/interactive.pm:842 diskdrake/interactive.pm:859 #, c-format msgid "new" msgstr "yangi" #: diskdrake/interactive.pm:857 #, c-format msgid "Choose an existing LVM to add to" msgstr "Qo'shish uchun mavjud bo'lgan LVM'ni tanlang" #: diskdrake/interactive.pm:863 #, c-format msgid "LVM name?" msgstr "LVM nomi?" #: diskdrake/interactive.pm:891 #, c-format msgid "" "Physical volume %s is still in use.\n" "Do you want to move used physical extents on this volume to other volumes?" msgstr "" #: diskdrake/interactive.pm:893 #, c-format msgid "Moving physical extents" msgstr "" #: diskdrake/interactive.pm:911 #, c-format msgid "This partition can not be used for loopback" msgstr "Diskning bu qismini loopback uchun ishlatib bo'lmaydi" #: diskdrake/interactive.pm:924 #, c-format msgid "Loopback" msgstr "Loopback" #: diskdrake/interactive.pm:925 #, c-format msgid "Loopback file name: " msgstr "Loopback faylining nomi:" #: diskdrake/interactive.pm:930 #, c-format msgid "Give a file name" msgstr "Faylning nomini kiriting" #: diskdrake/interactive.pm:933 #, c-format msgid "File is already used by another loopback, choose another one" msgstr "Fylni boshqa loopback ishlatayapti, boshqasini tanlang" #: diskdrake/interactive.pm:934 #, c-format msgid "File already exists. Use it?" msgstr "Fayl allaqachon mavjud. Ishlataymi?" #: diskdrake/interactive.pm:957 #, c-format msgid "Mount options" msgstr "Ulash parametrlari" #: diskdrake/interactive.pm:964 #, c-format msgid "Various" msgstr "Har xil" #: diskdrake/interactive.pm:1028 #, c-format msgid "device" msgstr "uskuna" #: diskdrake/interactive.pm:1029 #, c-format msgid "level" msgstr "daraja" #: diskdrake/interactive.pm:1030 #, fuzzy, c-format msgid "chunk size in KiB" msgstr "Yangi hajm (Mb): " #: diskdrake/interactive.pm:1047 #, c-format msgid "Be careful: this operation is dangerous." msgstr "Ehtiyot bo'ling: bu operatsiya xavfli." #: diskdrake/interactive.pm:1062 #, c-format msgid "What type of partitioning?" msgstr "Diskni qismlarga bo'lishning qaysi turi?" #: diskdrake/interactive.pm:1100 #, c-format msgid "You'll need to reboot before the modification can take place" msgstr "" "O'zgarishlar amalda qo'llanilishi uchun kompyuterni o'chirib-yoqish kerak" #: diskdrake/interactive.pm:1109 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "%s diskining qismlar jadvali diskga saqlanish arafasida!" #: diskdrake/interactive.pm:1118 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "" "Diskning %s qismi format qilgandan keyin u erdagi hamma ma'lumot yo'qoladi" #: diskdrake/interactive.pm:1134 #, c-format msgid "Move files to the new partition" msgstr "Fayllarni diskning yangi qismiga ko'chirish" #: diskdrake/interactive.pm:1134 #, c-format msgid "Hide files" msgstr "Fayllarni yashirish" #: diskdrake/interactive.pm:1135 #, c-format msgid "" "Directory %s already contains data\n" "(%s)" msgstr "" "Direktoriyada (%s) allaqachon ma'lumot bor\n" "(%s)" #: diskdrake/interactive.pm:1146 #, c-format msgid "Moving files to the new partition" msgstr "Fayllar diskning yangi qismiga ko'chirilmoqda" #: diskdrake/interactive.pm:1150 #, c-format msgid "Copying %s" msgstr "%s'dan nusxa ko'chirilmoqda" #: diskdrake/interactive.pm:1154 #, c-format msgid "Removing %s" msgstr "%s olib tashlanmoqda" #: diskdrake/interactive.pm:1168 #, c-format msgid "partition %s is now known as %s" msgstr "diskning %s qismi endi %s sifatida ma'lum" #: diskdrake/interactive.pm:1169 #, c-format msgid "Partitions have been renumbered: " msgstr "" #: diskdrake/interactive.pm:1189 diskdrake/interactive.pm:1251 #, c-format msgid "Device: " msgstr "Uskuna: " #: diskdrake/interactive.pm:1190 #, c-format msgid "Devfs name: " msgstr "Devfs nomi: " #: diskdrake/interactive.pm:1191 #, c-format msgid "Volume label: " msgstr "" #: diskdrake/interactive.pm:1192 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "DOS diskining harfi: %s (tavakkaliga)\n" #: diskdrake/interactive.pm:1196 diskdrake/interactive.pm:1205 #: diskdrake/interactive.pm:1269 #, c-format msgid "Type: " msgstr "Turi: " #: diskdrake/interactive.pm:1200 install_steps_gtk.pm:296 #, c-format msgid "Name: " msgstr "Nomi: " #: diskdrake/interactive.pm:1207 #, c-format msgid "Start: sector %s\n" msgstr "Boshi: sektor %s\n" #: diskdrake/interactive.pm:1208 #, c-format msgid "Size: %s" msgstr "Hajmi: %s" #: diskdrake/interactive.pm:1210 #, c-format msgid ", %s sectors" msgstr ", %s sektor" #: diskdrake/interactive.pm:1212 #, c-format msgid "Cylinder %d to %d\n" msgstr "Tsilindr %d dan %d gacha\n" #: diskdrake/interactive.pm:1213 #, c-format msgid "Number of logical extents: %d\n" msgstr "" #: diskdrake/interactive.pm:1214 #, c-format msgid "Formatted\n" msgstr "Format qilingan\n" #: diskdrake/interactive.pm:1215 #, c-format msgid "Not formatted\n" msgstr "Format qilinmagan\n" #: diskdrake/interactive.pm:1216 #, c-format msgid "Mounted\n" msgstr "Ulangan\n" #: diskdrake/interactive.pm:1217 #, c-format msgid "RAID %s\n" msgstr "RAID %s\n" #: diskdrake/interactive.pm:1222 #, c-format msgid "" "Loopback file(s):\n" " %s\n" msgstr "" "Loopback fayl(lar):\n" " %s\n" #: diskdrake/interactive.pm:1223 #, c-format msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" #: diskdrake/interactive.pm:1225 #, c-format msgid "Level %s\n" msgstr "%s daraja\n" #: diskdrake/interactive.pm:1226 #, c-format msgid "Chunk size %d KiB\n" msgstr "" #: diskdrake/interactive.pm:1227 #, c-format msgid "RAID-disks %s\n" msgstr "RAID disklar %s\n" #: diskdrake/interactive.pm:1229 #, c-format msgid "Loopback file name: %s" msgstr "Loopback faylining nomi: %s" #: diskdrake/interactive.pm:1232 #, c-format msgid "" "\n" "Chances are, this partition is\n" "a Driver partition. You should\n" "probably leave it alone.\n" msgstr "" "\n" "Ehtimol, diskning bu qismi\n" "drayverning qismidir.\n" "Yaxshisi unga teginmang.\n" #: diskdrake/interactive.pm:1235 #, c-format msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" msgstr "" #: diskdrake/interactive.pm:1252 #, c-format msgid "Read-only" msgstr "Faqat o'qishga" #: diskdrake/interactive.pm:1253 #, c-format msgid "Size: %s\n" msgstr "Hajmi: %s\n" #: diskdrake/interactive.pm:1254 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "Geometriya: %s tsilindr, %s kallacha, %s sektor\n" #: diskdrake/interactive.pm:1255 #, c-format msgid "Info: " msgstr "Ma'lumot: " #: diskdrake/interactive.pm:1256 #, c-format msgid "LVM-disks %s\n" msgstr "LVM disklar %s\n" #: diskdrake/interactive.pm:1257 #, c-format msgid "Partition table type: %s\n" msgstr "Disk qismlar jadvalining turi: %s\n" #: diskdrake/interactive.pm:1258 #, c-format msgid "on channel %d id %d\n" msgstr "" #: diskdrake/interactive.pm:1301 #, c-format msgid "Filesystem encryption key" msgstr "Fayl tizimning kodlash kaliti" #: diskdrake/interactive.pm:1302 #, c-format msgid "Choose your filesystem encryption key" msgstr "Fayl tizimngizning kodlash kalitini tanlang" #: diskdrake/interactive.pm:1305 #, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "" "Kodlash kaliti juda sodda (u eng kami %d belgidan iborat bo'lishi shart)" #: diskdrake/interactive.pm:1306 #, c-format msgid "The encryption keys do not match" msgstr "Kodlash kalitlari mos kelmaydi" #: diskdrake/interactive.pm:1309 network/netconnect.pm:1022 #: standalone/drakconnect:419 #, c-format msgid "Encryption key" msgstr "Kodlash kaliti" #: diskdrake/interactive.pm:1310 #, c-format msgid "Encryption key (again)" msgstr "Kodlash kaliti (yana)" #: diskdrake/interactive.pm:1311 standalone/drakvpn:1017 #: standalone/drakvpn:1102 #, c-format msgid "Encryption algorithm" msgstr "" #: diskdrake/removable.pm:46 #, c-format msgid "Change type" msgstr "Turini o'zgartirish" #: diskdrake/smbnfs_gtk.pm:162 #, c-format msgid "Can not login using username %s (bad password?)" msgstr "" #: diskdrake/smbnfs_gtk.pm:166 diskdrake/smbnfs_gtk.pm:175 #, c-format msgid "Domain Authentication Required" msgstr "" #: diskdrake/smbnfs_gtk.pm:167 #, c-format msgid "Which username" msgstr "Qaysi foydalanuvchi" #: diskdrake/smbnfs_gtk.pm:167 #, c-format msgid "Another one" msgstr "Boshqasi" #: diskdrake/smbnfs_gtk.pm:176 #, c-format msgid "" "Please enter your username, password and domain name to access this host." msgstr "" #: diskdrake/smbnfs_gtk.pm:178 standalone/drakbackup:3489 #, c-format msgid "Username" msgstr "Foydalanuvchi" #: diskdrake/smbnfs_gtk.pm:204 #, c-format msgid "Search servers" msgstr "Serverlarni qidirish" #: diskdrake/smbnfs_gtk.pm:209 #, c-format msgid "Search new servers" msgstr "Yangi serverlarni qidirish" #: do_pkgs.pm:16 do_pkgs.pm:31 #, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "Paket (%s) o'rnatilishi kerak. Uni o'rnatishni istaysizmi?" #: do_pkgs.pm:21 do_pkgs.pm:36 #, c-format msgid "Mandatory package %s is missing" msgstr "Shart bo'lgan paket (%s) etishmayapti" #: do_pkgs.pm:182 #, c-format msgid "Installing packages..." msgstr "Paketlar o'rnatilmoqda..." #: do_pkgs.pm:227 #, c-format msgid "Removing packages..." msgstr "Paketlar o'chirilmoqda..." #: fs/format.pm:57 fs/format.pm:64 #, c-format msgid "Formatting partition %s" msgstr "Diskning qismi (%s) format qilinmoqda" #: fs/format.pm:61 #, c-format msgid "Creating and formatting file %s" msgstr "%s fayli yaratilmoqda va format qilinmoqda" #: fs/format.pm:114 #, c-format msgid "I do not know how to format %s in type %s" msgstr "%s'ni %s turida qanday format qilishni bilmayman" #: fs/format.pm:119 fs/format.pm:121 #, c-format msgid "%s formatting of %s failed" msgstr "%s turida %s'ni format qilish muvaffaqiyatsiz tugadi" #: fs/loopback.pm:24 #, c-format msgid "Circular mounts %s\n" msgstr "" #: fs/mount.pm:72 #, c-format msgid "Mounting partition %s" msgstr "Disk qismi (%s) ulanmoqda" #: fs/mount.pm:73 #, c-format msgid "mounting partition %s in directory %s failed" msgstr "Disk qismini (%s) direktoriyaga (%s) ulash muvaffaqiyatsiz tugadi" #: fs/mount.pm:78 fs/mount.pm:95 #, c-format msgid "Checking %s" msgstr "%s tekshirilmoqda" #: fs/mount.pm:111 partition_table.pm:385 #, c-format msgid "error unmounting %s: %s" msgstr "%s'ni ajratishda xato: %s" #: fs/mount.pm:140 #, c-format msgid "Enabling swap partition %s" msgstr "Diskning svop qismi (%s) yoqilmoqda" #: fs/mount_options.pm:111 #, c-format msgid "Enable group disk quota accounting and optionally enforce limits" msgstr "" #: fs/mount_options.pm:113 #, c-format msgid "" "Do not update inode access times on this file system\n" "(e.g, for faster access on the news spool to speed up news servers)." msgstr "" #: fs/mount_options.pm:116 #, c-format msgid "" "Can only be mounted explicitly (i.e.,\n" "the -a option will not cause the file system to be mounted)." msgstr "" #: fs/mount_options.pm:119 #, c-format msgid "Do not interpret character or block special devices on the file system." msgstr "" #: fs/mount_options.pm:121 #, c-format msgid "" "Do not allow execution of any binaries on the mounted\n" "file system. This option might be useful for a server that has file systems\n" "containing binaries for architectures other than its own." msgstr "" #: fs/mount_options.pm:125 #, c-format msgid "" "Do not allow set-user-identifier or set-group-identifier\n" "bits to take effect. (This seems safe, but is in fact rather unsafe if you\n" "have suidperl(1) installed.)" msgstr "" #: fs/mount_options.pm:129 #, c-format msgid "Mount the file system read-only." msgstr "Fayl tizimlarni faqat o'qishga deb ulash." #: fs/mount_options.pm:131 #, c-format msgid "All I/O to the file system should be done synchronously." msgstr "" #: fs/mount_options.pm:135 #, c-format msgid "" "Allow an ordinary user to mount the file system. The\n" "name of the mounting user is written to mtab so that he can unmount the " "file\n" "system again. This option implies the options noexec, nosuid, and nodev\n" "(unless overridden by subsequent options, as in the option line\n" "user,exec,dev,suid )." msgstr "" #: fs/mount_options.pm:141 #, c-format msgid "" "Enable user disk quota accounting enabled, and optionally enforce limits" msgstr "" #: fs/mount_options.pm:143 #, c-format msgid "Give write access to ordinary users" msgstr "Oddiy foydalanuvchilarga yozish ruxsatini berish" #: fs/mount_options.pm:145 #, c-format msgid "Give read-only access to ordinary users" msgstr "Oddiy foydalanuvchilarga faqat o'qishga ruxsatini berish" #: fs/type.pm:375 #, c-format msgid "You can not use JFS for partitions smaller than 16MB" msgstr "" "Hajmi 16 Mb'dan kichik bo'lgan qismlar uchun JFS fayl tizimini ishlatib " "bo'lmaydi" #: fs/type.pm:376 #, c-format msgid "You can not use ReiserFS for partitions smaller than 32MB" msgstr "" "Hajmi 32 Mb'dan kichik bo'lgan qismlar uchun ReiserFS fayl tizimini ishlatib " "bo'lmaydi" #: fsedit.pm:27 #, c-format msgid "with /usr" msgstr "/usr bilan" #: fsedit.pm:32 #, c-format msgid "server" msgstr "server" #: fsedit.pm:210 #, c-format msgid "" "I can not read the partition table of device %s, it's too corrupted for me :" "(\n" "I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" "The other solution is to not allow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to lose all the partitions?\n" msgstr "" #: fsedit.pm:381 #, c-format msgid "Mount points must begin with a leading /" msgstr "Ulash nuqtalari \"/\" belgisi bilan boshlanishi shart" #: fsedit.pm:382 #, c-format msgid "Mount points should contain only alphanumerical characters" msgstr "Ulash nuqtalari faqat son yoki harflardan iborat bo'lishi mumkin" #: fsedit.pm:383 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "%s ulash nuqtali diskning qismi allaqachon mavjud\n" #: fsedit.pm:385 #, c-format msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "Please be sure to add a /boot partition" msgstr "" #: fsedit.pm:390 #, c-format msgid "" "You can not use a LVM Logical Volume for mount point %s since it spans " "physical volumes" msgstr "" #: fsedit.pm:392 #, c-format msgid "" "You've selected a LVM Logical Volume as root (/).\n" "The bootloader is not able to handle this when the volume spans physical " "volumes.\n" "You should create a /boot partition first" msgstr "" #: fsedit.pm:396 fsedit.pm:398 #, c-format msgid "This directory should remain within the root filesystem" msgstr "Bu direktoriya tub fayl tizimida bo'lishi kerak" #: fsedit.pm:400 fsedit.pm:402 #, c-format msgid "" "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " "point\n" msgstr "" "Bu ulash nuqtasi uchun haqiqiy fayl tizimi (ext2/ext3, reiserfs, xfs, yoki " "jfs) kerak\n" #: fsedit.pm:404 #, c-format msgid "You can not use an encrypted file system for mount point %s" msgstr "%s ulash nuqtasi uchun kodlangan fayl tizimini ishlatib bo'lmaydi" #: fsedit.pm:465 #, c-format msgid "Not enough free space for auto-allocating" msgstr "Avto-taqsimlash uchun etarlicha joy yo'q" #: fsedit.pm:467 #, c-format msgid "Nothing to do" msgstr "Bajarish uchun hech narsa yo'q" #: harddrake/data.pm:62 install_any.pm:1665 #, c-format msgid "Floppy" msgstr "Disket" #: harddrake/data.pm:72 #, c-format msgid "Zip" msgstr "Zip" #: harddrake/data.pm:88 install_any.pm:1666 #, c-format msgid "Hard Disk" msgstr "Hard Disk" #: harddrake/data.pm:97 install_any.pm:1667 #, c-format msgid "CDROM" msgstr "Kompakt-disk" #: harddrake/data.pm:107 #, c-format msgid "CD/DVD burners" msgstr "Yozadigan kompakt-disk/DVD" #: harddrake/data.pm:117 #, c-format msgid "DVD-ROM" msgstr "DVD-ROM" #: harddrake/data.pm:127 standalone/drakbackup:2036 #, c-format msgid "Tape" msgstr "Magnit tasma" #: harddrake/data.pm:136 #, c-format msgid "Videocard" msgstr "Video karta" #: harddrake/data.pm:146 #, c-format msgid "DVB card" msgstr "" #: harddrake/data.pm:154 #, c-format msgid "Tvcard" msgstr "TV karta" #: harddrake/data.pm:163 #, c-format msgid "Other MultiMedia devices" msgstr "Boshqa multimedia uskunalar" #: harddrake/data.pm:172 #, c-format msgid "Soundcard" msgstr "Tovush kartasi" #: harddrake/data.pm:185 #, c-format msgid "Webcam" msgstr "Veb-kamera" #: harddrake/data.pm:199 #, c-format msgid "Processors" msgstr "Protsessorlar" #: harddrake/data.pm:209 #, c-format msgid "ISDN adapters" msgstr "ISDN adapterlar" #: harddrake/data.pm:220 #, c-format msgid "USB sound devices" msgstr "" #: harddrake/data.pm:229 #, c-format msgid "Radio cards" msgstr "" #: harddrake/data.pm:238 #, c-format msgid "ATM network cards" msgstr "" #: harddrake/data.pm:247 #, c-format msgid "WAN network cards" msgstr "" #: harddrake/data.pm:256 #, c-format msgid "Bluetooth devices" msgstr "" #: harddrake/data.pm:265 #, c-format msgid "Ethernetcard" msgstr "Ethernet karta" #: harddrake/data.pm:282 network/netconnect.pm:488 #, c-format msgid "Modem" msgstr "Modem" #: harddrake/data.pm:292 #, c-format msgid "ADSL adapters" msgstr "ADSL adapterlar" #: harddrake/data.pm:306 #, c-format msgid "Memory" msgstr "Xotira" #: harddrake/data.pm:315 #, c-format msgid "AGP controllers" msgstr "AGP kontrollerlar" #: harddrake/data.pm:324 help.pm:186 help.pm:855 #: install_steps_interactive.pm:984 #, c-format msgid "Printer" msgstr "Printer" #. -PO: these are joysticks controllers: #: harddrake/data.pm:338 #, c-format msgid "Game port controllers" msgstr "" #: harddrake/data.pm:347 #, c-format msgid "Joystick" msgstr "Joystik" #: harddrake/data.pm:357 #, c-format msgid "SATA controllers" msgstr "SATA kontrollerlar" #: harddrake/data.pm:366 #, c-format msgid "RAID controllers" msgstr "RAID kontrollerlar" #: harddrake/data.pm:375 #, c-format msgid "(E)IDE/ATA controllers" msgstr "(E)IDE/ATA kontrollerlar" #: harddrake/data.pm:384 #, c-format msgid "Firewire controllers" msgstr "Fayervol kontrollerlar" #: harddrake/data.pm:393 #, c-format msgid "PCMCIA controllers" msgstr "PCMCIA kontrollerlar" #: harddrake/data.pm:402 #, c-format msgid "SCSI controllers" msgstr "SCSI kontrollerlar" #: harddrake/data.pm:411 #, c-format msgid "USB controllers" msgstr "USB kontrollerlar" #: harddrake/data.pm:420 #, c-format msgid "USB ports" msgstr "USB portlar" #: harddrake/data.pm:429 #, c-format msgid "SMBus controllers" msgstr "SMBus kontrollerlar" #: harddrake/data.pm:438 #, c-format msgid "Bridges and system controllers" msgstr "Ko'priklar va tizimning kontrollerlari" #: harddrake/data.pm:447 help.pm:855 install_steps_interactive.pm:117 #: install_steps_interactive.pm:944 standalone/keyboarddrake:29 #, c-format msgid "Keyboard" msgstr "Tugmatag" #: harddrake/data.pm:460 #, c-format msgid "Tablet and touchscreen" msgstr "" #: harddrake/data.pm:469 help.pm:855 install_steps_interactive.pm:977 #, c-format msgid "Mouse" msgstr "Sichqoncha" #: harddrake/data.pm:483 #, c-format msgid "UPS" msgstr "UPS" #: harddrake/data.pm:492 #, c-format msgid "Scanner" msgstr "Skanner" #: harddrake/data.pm:502 standalone/harddrake2:441 #, c-format msgid "Unknown/Others" msgstr "Noma'lum/Boshqalar" #: harddrake/data.pm:530 #, c-format msgid "cpu # " msgstr "protsessor # " #: harddrake/sound.pm:190 standalone/drakconnect:162 #: standalone/drakconnect:637 #, c-format msgid "Please Wait... Applying the configuration" msgstr "Iltimos kutib turing... Moslamalar qo'llanilmoqda" #: harddrake/sound.pm:226 #, c-format msgid "No alternative driver" msgstr "Boshqa drayver yo'q" #: harddrake/sound.pm:227 #, c-format msgid "" "There's no known OSS/ALSA alternative driver for your sound card (%s) which " "currently uses \"%s\"" msgstr "" "Sizning %s tovush kartangizga, joriy holda %s drayveri ishlatilmoqda, ma'lum " "bo'lgan boshqa OSS/ALSA drayveri mavjud emas." #: harddrake/sound.pm:233 #, c-format msgid "Sound configuration" msgstr "Tovushni moslash" #: harddrake/sound.pm:235 #, c-format msgid "" "Here you can select an alternative driver (either OSS or ALSA) for your " "sound card (%s)." msgstr "" "Bu erda %s tovush kartangiz uchun boshqa drayverni (OSS yoki ALSA) " "tanlashingiz mumkin." #. -PO: here the first %s is either "OSS" or "ALSA", #. -PO: the second %s is the name of the current driver #. -PO: and the third %s is the name of the default driver #: harddrake/sound.pm:240 #, c-format msgid "" "\n" "\n" "Your card currently use the %s\"%s\" driver (default driver for your card is " "\"%s\")" msgstr "" "\n" "\n" "Sizning kartangiz %s\"%s\" drayverini ishlatmoqda (kartangizning andoza " "drayveri \"%s\")" #: harddrake/sound.pm:242 #, c-format msgid "" "OSS (Open Sound System) was the first sound API. It's an OS independent " "sound API (it's available on most UNIX(tm) systems) but it's a very basic " "and limited API.\n" "What's more, OSS drivers all reinvent the wheel.\n" "\n" "ALSA (Advanced Linux Sound Architecture) is a modularized architecture " "which\n" "supports quite a large range of ISA, USB and PCI cards.\n" "\n" "It also provides a much higher API than OSS.\n" "\n" "To use alsa, one can either use:\n" "- the old compatibility OSS api\n" "- the new ALSA api that provides many enhanced features but requires using " "the ALSA library.\n" msgstr "" #: harddrake/sound.pm:256 harddrake/sound.pm:341 standalone/drakups:146 #, c-format msgid "Driver:" msgstr "Drayver:" #: harddrake/sound.pm:261 #, c-format msgid "Trouble shooting" msgstr "Nosozliklarni topish va bartaraf qilish" #: harddrake/sound.pm:269 keyboard.pm:391 lang.pm:1078 #: network/ndiswrapper.pm:95 network/netconnect.pm:467 #: printer/printerdrake.pm:1206 printer/printerdrake.pm:2230 #: printer/printerdrake.pm:2316 printer/printerdrake.pm:2362 #: printer/printerdrake.pm:2429 printer/printerdrake.pm:2464 #: printer/printerdrake.pm:2773 printer/printerdrake.pm:2780 #: printer/printerdrake.pm:3740 printer/printerdrake.pm:4069 #: printer/printerdrake.pm:4189 printer/printerdrake.pm:5310 #: standalone/drakTermServ:326 standalone/drakTermServ:1169 #: standalone/drakTermServ:1230 standalone/drakTermServ:1895 #: standalone/drakbackup:497 standalone/drakbackup:596 standalone/drakboot:125 #: standalone/drakclock:224 standalone/drakconnect:969 standalone/drakups:27 #: standalone/harddrake2:478 standalone/scannerdrake:51 #: standalone/scannerdrake:940 #, c-format msgid "Warning" msgstr "Diqqat" #: harddrake/sound.pm:269 #, c-format msgid "" "The old \"%s\" driver is blacklisted.\n" "\n" "It has been reported to oops the kernel on unloading.\n" "\n" "The new \"%s\" driver will only be used on next bootstrap." msgstr "" #: harddrake/sound.pm:277 #, c-format msgid "No open source driver" msgstr "" #: harddrake/sound.pm:278 #, c-format msgid "" "There's no free driver for your sound card (%s), but there's a proprietary " "driver at \"%s\"." msgstr "" #: harddrake/sound.pm:281 #, c-format msgid "No known driver" msgstr "Ma'lum bo'lgan drayver yo'q" #: harddrake/sound.pm:282 #, c-format msgid "There's no known driver for your sound card (%s)" msgstr "" "Sizning \"%s\" tovush kartangiz uchun ma'lum bo'lgan drayver mavjud emas." #: harddrake/sound.pm:286 #, c-format msgid "Unknown driver" msgstr "Noma'lum drayver" #: harddrake/sound.pm:287 #, c-format msgid "Error: The \"%s\" driver for your sound card is unlisted" msgstr "Xato: Tovush kartangiz uchun \"%s\" drayveri ro'yxatda yo'q" #: harddrake/sound.pm:301 #, c-format msgid "Sound trouble shooting" msgstr "Tovush nosozliklarini topish va bartaraf qilish" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: harddrake/sound.pm:304 #, c-format msgid "" "The classic bug sound tester is to run the following commands:\n" "\n" "\n" "- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n" "by default\n" "\n" "- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n" "currently uses\n" "\n" "- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n" "loaded or not\n" "\n" "- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n" "tell you if sound and alsa services're configured to be run on\n" "initlevel 3\n" "\n" "- \"aumix -q\" will tell you if the sound volume is muted or not\n" "\n" "- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n" msgstr "" #: harddrake/sound.pm:330 #, c-format msgid "Let me pick any driver" msgstr "Boshqa drayverni tanlash" #: harddrake/sound.pm:333 #, c-format msgid "Choosing an arbitrary driver" msgstr "Ixtiyoriy drayver tanlanmoqda" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: harddrake/sound.pm:336 #, c-format msgid "" "If you really think that you know which driver is the right one for your " "card\n" "you can pick one in the above list.\n" "\n" "The current driver for your \"%s\" sound card is \"%s\" " msgstr "" "Agar sizning tovush kartangizga to'g'ri keladigan drayverni rostdan " "bilsangiz,\n" "uni yuqoridagi ro'yxatdan tanlashingiz mumkin.\n" "\n" "Sizning \"%s\" tovush kartangizning joriy drayveri \"%s\" " #: harddrake/v4l.pm:12 standalone/net_applet:67 standalone/net_applet:68 #: standalone/net_applet:70 #, c-format msgid "Auto-detect" msgstr "Avto-aniqlash" #: harddrake/v4l.pm:85 harddrake/v4l.pm:263 harddrake/v4l.pm:296 #, c-format msgid "Unknown|Generic" msgstr "Noma'lum|Andoza" #: harddrake/v4l.pm:118 #, c-format msgid "Unknown|CPH05X (bt878) [many vendors]" msgstr "Noma'lum|CPH05X (bt878) [ko'p ishlab chiqaruvchilar]" #: harddrake/v4l.pm:119 #, c-format msgid "Unknown|CPH06X (bt878) [many vendors]" msgstr "Noma'lum|CPH06X (bt878) [aksariyat ishlab chiqaruvchilar]" #: harddrake/v4l.pm:392 #, c-format msgid "" "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" "detect the rights parameters.\n" "If your card is misdetected, you can force the right tuner and card types " "here. Just select your tv card parameters if needed." msgstr "" #: harddrake/v4l.pm:395 #, c-format msgid "Card model:" msgstr "Kartaning modeli:" #: harddrake/v4l.pm:396 #, c-format msgid "Tuner type:" msgstr "" #: harddrake/v4l.pm:397 #, c-format msgid "Number of capture buffers:" msgstr "" #: harddrake/v4l.pm:397 #, c-format msgid "number of capture buffers for mmap'ed capture" msgstr "" #: harddrake/v4l.pm:399 #, c-format msgid "PLL setting:" msgstr "" #: harddrake/v4l.pm:400 #, c-format msgid "Radio support:" msgstr "" #: harddrake/v4l.pm:400 #, c-format msgid "enable radio support" msgstr "" #: help.pm:11 #, c-format msgid "" "Before continuing, you should carefully read the terms of the license. It\n" "covers the entire Mandriva Linux distribution. If you agree with all the\n" "terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n" "button will reboot your computer." msgstr "" "Davom etishdan oldin litsenziyaning shartlarini e'tibor bilan o'qib\n" "chiqing. Litsenziya butun Mandriva Linux'ga tegishli. Agar uning barcha\n" "shartlariga rozi bo'lsangiz, \"%s\"ni tanlang. Agar rozi bo'lmasangiz,\n" "kompyuterni o'chirib-yoqish uchun \"%s\" tugmasini bosing." #: help.pm:14 install_steps_gtk.pm:552 install_steps_interactive.pm:91 #: install_steps_interactive.pm:735 standalone/drakautoinst:214 #, c-format msgid "Accept" msgstr "Qabul qilish" #: help.pm:17 #, c-format msgid "" "GNU/Linux is a multi-user system which means each user can have his or her\n" "own preferences, own files and so on. But unlike \"root\", who is the\n" "system administrator, the users you add at this point will not be " "authorized\n" "to change anything except their own files and their own configurations,\n" "protecting the system from unintentional or malicious changes which could\n" "impact on the system as a whole. You'll have to create at least one regular\n" "user for yourself -- this is the account which you should use for routine,\n" "day-to-day usage. Although it's very easy to log in as \"root\" to do\n" "anything and everything, it may also be very dangerous! A very simple\n" "mistake could mean that your system will not work any more. If you make a\n" "serious mistake as a regular user, the worst that can happen is that you'll\n" "lose some information, but you will not affect the entire system.\n" "\n" "The first field asks you for a real name. Of course, this is not mandatory\n" "-- you can actually enter whatever you like. DrakX will use the first word\n" "you type in this field and copy it to the \"%s\" one, which is the name\n" "this user will enter to log onto the system. If you like, you may override\n" "the default and change the user name. The next step is to enter a password.\n" "From a security point of view, a non-privileged (regular) user password is\n" "not as crucial as the \"root\" password, but that's no reason to neglect it\n" "by making it blank or too simple: after all, your files could be the ones\n" "at risk.\n" "\n" "Once you click on \"%s\", you can add other users. Add a user for each one\n" "of your friends, your father, your sister, etc. Click \"%s\" when you're\n" "finished adding users.\n" "\n" "Clicking the \"%s\" button allows you to change the default \"shell\" for\n" "that user (bash by default).\n" "\n" "When you're finished adding users, you'll be asked to choose a user who\n" "will be automatically logged into the system when the computer boots up. If\n" "you're interested in that feature (and do not care much about local\n" "security), choose the desired user and window manager, then click on\n" "\"%s\". If you're not interested in this feature, uncheck the \"%s\" box." msgstr "" #: help.pm:51 printer/printerdrake.pm:1662 printer/printerdrake.pm:1783 #, c-format msgid "User name" msgstr "Foydalanuvchi" #: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:233 #: install_steps_gtk.pm:694 interactive.pm:432 interactive/newt.pm:321 #: network/thirdparty.pm:323 printer/printerdrake.pm:3678 #: standalone/drakTermServ:383 standalone/drakbackup:3940 #: standalone/drakbackup:4034 standalone/drakbackup:4051 #: standalone/drakbackup:4069 ugtk2.pm:506 #, c-format msgid "Next" msgstr "Keyingi" #: help.pm:51 #, c-format msgid "Do you want to use this feature?" msgstr "Bu qulaylikdan foydalanishni istaysizmi?" #: help.pm:54 #, c-format msgid "" "Listed here are the existing Linux partitions detected on your hard drive.\n" "You can keep the choices made by the wizard, since they are good for most\n" "common installations. If you make any changes, you must at least define a\n" "root partition (\"/\"). Do not choose too small a partition or you will not\n" "be able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a \"/home\" partition\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." msgstr "" #: help.pm:85 #, c-format msgid "" "The Mandriva Linux installation is distributed on several CD-ROMs. If a\n" "selected package is located on another CD-ROM, DrakX will eject the current\n" "CD and ask you to insert the required one. If you do not have the requested\n" "CD at hand, just click on \"%s\", the corresponding packages will not be\n" "installed." msgstr "" "Mandriva Linux bir nechta kompakt-disklarda tarqatiladi. Agar tanlangan " "paket\n" "boshqa kompakt-diskda joylashgan bo'lsa, DrakX joriy kompakt-diskni\n" "chiqaradi va tegishlisini qo'yishni so'raydi. Agar so'ralgan kompakt-disk " "sizda\n" "bo'lmasa, \"%s\" tugmasini bosing. Bu holda, tegishli paketlar o'rnatilmaydi." #: help.pm:92 #, c-format msgid "" "It's now time to specify which programs you wish to install on your system.\n" "There are thousands of packages available for Mandriva Linux, and to make " "it\n" "simpler to manage, they have been placed into groups of similar\n" "applications.\n" "\n" "Mandriva Linux sorts package groups in four categories. You can mix and\n" "match applications from the various categories, so a ``Workstation''\n" "installation can still have applications from the ``Server'' category\n" "installed.\n" "\n" " * \"%s\": if you plan to use your machine as a workstation, select one or\n" "more of the groups in the workstation category.\n" "\n" " * \"%s\": if you plan on using your machine for programming, select the\n" "appropriate groups from that category. The special \"LSB\" group will\n" "configure your system so that it complies as much as possible with the\n" "Linux Standard Base specifications.\n" "\n" " Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n" "instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n" "of the system. However, if you do not select the \"LSB\" group you will\n" "still have a system which is nearly 100%% LSB-compliant.\n" "\n" " * \"%s\": if your machine is intended to be a server, select which of the\n" "more common services you wish to install on your machine.\n" "\n" " * \"%s\": this is where you will choose your preferred graphical\n" "environment. At least one must be selected if you want to have a graphical\n" "interface available.\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group.\n" "\n" "You can check the \"%s\" box, which is useful if you're familiar with the\n" "packages being offered or if you want to have total control over what will\n" "be installed.\n" "\n" "If you start the installation in \"%s\" mode, you can deselect all groups\n" "and prevent the installation of any new packages. This is useful for\n" "repairing or updating an existing system.\n" "\n" "If you deselect all groups when performing a regular installation (as\n" "opposed to an upgrade), a dialog will pop up suggesting different options\n" "for a minimal installation:\n" "\n" " * \"%s\": install the minimum number of packages possible to have a\n" "working graphical desktop.\n" "\n" " * \"%s\": installs the base system plus basic utilities and their\n" "documentation. This installation is suitable for setting up a server.\n" "\n" " * \"%s\": will install the absolute minimum number of packages necessary\n" "to get a working Linux system. With this installation you will only have a\n" "command-line interface. The total size of this installation is about 65\n" "megabytes." msgstr "" #: help.pm:146 share/compssUsers.pl:24 #, c-format msgid "Workstation" msgstr "Ish stantsiyasi" #: help.pm:146 share/compssUsers.pl:65 share/compssUsers.pl:167 #: share/compssUsers.pl:169 #, c-format msgid "Development" msgstr "Tuzish" #: help.pm:146 share/compssUsers.pl:145 #, c-format msgid "Graphical Environment" msgstr "Grafik muhit" #: help.pm:146 install_steps_gtk.pm:231 install_steps_interactive.pm:642 #, c-format msgid "Individual package selection" msgstr "Paketlarni bittama-bitta tanlash" #: help.pm:146 help.pm:588 #, c-format msgid "Upgrade" msgstr "Yangilash" #: help.pm:146 install_steps_interactive.pm:600 #, c-format msgid "With X" msgstr "X bilan" #: help.pm:146 #, c-format msgid "With basic documentation" msgstr "Asosiy qo'llanmalar bilan" #: help.pm:146 #, c-format msgid "Truly minimal install" msgstr "Haqiqiy minimal o'rnatish" #: help.pm:149 #, c-format msgid "" "If you choose to install packages individually, the installer will present\n" "a tree containing all packages classified by groups and subgroups. While\n" "browsing the tree, you can select entire groups, subgroups, or individual\n" "packages.\n" "\n" "Whenever you select a package on the tree, a description will appear on the\n" "right to let you know the purpose of that package.\n" "\n" "!! If a server package has been selected, either because you specifically\n" "chose the individual package or because it was part of a group of packages,\n" "you'll be asked to confirm that you really want those servers to be\n" "installed. By default Mandriva Linux will automatically start any installed\n" "services at boot time. Even if they are safe and have no known issues at\n" "the time the distribution was shipped, it is entirely possible that\n" "security holes were discovered after this version of Mandriva Linux was\n" "finalized. If you do not know what a particular service is supposed to do " "or\n" "why it's being installed, then click \"%s\". Clicking \"%s\" will install\n" "the listed services and they will be started automatically at boot time. !!\n" "\n" "The \"%s\" option is used to disable the warning dialog which appears\n" "whenever the installer automatically selects a package to resolve a\n" "dependency issue. Some packages depend on others and the installation of\n" "one particular package may require the installation of another package. The\n" "installer can determine which packages are required to satisfy a dependency\n" "to successfully complete the installation.\n" "\n" "The tiny floppy disk icon at the bottom of the list allows you to load a\n" "package list created during a previous installation. This is useful if you\n" "have a number of machines that you wish to configure identically. Clicking\n" "on this icon will ask you to insert the floppy disk created at the end of\n" "another installation. See the second tip of the last step on how to create\n" "such a floppy." msgstr "" #: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:904 #: interactive.pm:157 modules/interactive.pm:71 standalone/drakbackup:2503 #: standalone/draksec:54 standalone/harddrake2:308 standalone/net_applet:355 #: ugtk2.pm:907 wizards.pm:156 #, c-format msgid "No" msgstr "Yo'q" #: help.pm:180 help.pm:285 help.pm:444 install_any.pm:904 interactive.pm:157 #: modules/interactive.pm:71 printer/printerdrake.pm:743 #: standalone/drakbackup:2503 standalone/draksec:55 standalone/harddrake2:307 #: standalone/net_applet:359 ugtk2.pm:907 wizards.pm:156 #, c-format msgid "Yes" msgstr "Ha" #: help.pm:180 #, c-format msgid "Automatic dependencies" msgstr "" #: help.pm:183 #, c-format msgid "" "\"%s\": clicking on the \"%s\" button will open the printer configuration\n" "wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n" "information on how to set up a new printer. The interface presented in our\n" "manual is similar to the one used during installation." msgstr "" #: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:607 #: standalone/drakbackup:2327 standalone/drakbackup:2331 #: standalone/drakbackup:2335 standalone/drakbackup:2339 #, c-format msgid "Configure" msgstr "Moslash" #: help.pm:189 #, c-format msgid "" "This dialog is used to select which services you wish to start at boot\n" "time.\n" "\n" "DrakX will list all services available on the current installation. Review\n" "each one of them carefully and uncheck those which are not needed at boot\n" "time.\n" "\n" "A short explanatory text will be displayed about a service when it is\n" "selected. However, if you're not sure whether a service is useful or not,\n" "it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you probably do not want to start any services which you do not " "need.\n" "Please remember that some services can be dangerous if they're enabled on a\n" "server. In general, select only those services you really need. !!" msgstr "" #: help.pm:206 #, c-format msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n" "local time according to the time zone you selected. If the clock on your\n" "motherboard is set to local time, you may deactivate this by unselecting\n" "\"%s\", which will let GNU/Linux know that the system clock and the\n" "hardware clock are in the same time zone. This is useful when the machine\n" "also hosts another operating system.\n" "\n" "The \"%s\" option will automatically regulate the system clock by\n" "connecting to a remote time server on the Internet. For this feature to\n" "work, you must have a working Internet connection. We recommend that you\n" "choose a time server located near you. This option actually installs a time\n" "server which can be used by other machines on your local network as well." msgstr "" #: help.pm:217 install_steps_interactive.pm:879 #, c-format msgid "Hardware clock set to GMT" msgstr "" #: help.pm:217 #, c-format msgid "Automatic time synchronization" msgstr "" #: help.pm:220 #, fuzzy, c-format msgid "" "Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If this is not correct, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the situation where different servers are available for your card,\n" "with or without 3D acceleration, you're asked to choose the server which\n" "best suits your needs." msgstr "" "Monitor\n" "\n" " Odatda, o'rnatuvchi kompyuteringizga ulangan monitorni\n" "avtomatik ravishda aniqlaydi va moslaydi. Agar bu noto'g'ri\n" "bo'lsa, aslida ulangan monitorni ro'yxatdan tanlashingiz mumkin." #: help.pm:231 #, c-format msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" "on which all the graphical environments (KDE, GNOME, AfterStep,\n" "WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n" "\n" "You'll see a list of different parameters to change to get an optimal\n" "graphical display.\n" "\n" "Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If this is not correct, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the situation where different servers are available for your card,\n" "with or without 3D acceleration, you're asked to choose the server which\n" "best suits your needs.\n" "\n" "\n" "\n" "Monitor\n" "\n" " Normally the installer will automatically detect and configure the\n" "monitor connected to your machine. If it is not correct, you can choose\n" "from this list the monitor which is connected to your computer.\n" "\n" "\n" "\n" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "graphics hardware. Choose the one which best suits your needs (you will be\n" "able to make changes after the installation). A sample of the chosen\n" "configuration is shown in the monitor picture.\n" "\n" "\n" "\n" "Test\n" "\n" " Depending on your hardware, this entry might not appear.\n" "\n" " The system will try to open a graphical screen at the desired\n" "resolution. If you see the test message during the test and answer \"%s\",\n" "then DrakX will proceed to the next step. If you do not see it, then it\n" "means that some part of the auto-detected configuration was incorrect and\n" "the test will automatically end after 12 seconds and return you to the\n" "menu. Change settings until you get a correct graphical display.\n" "\n" "\n" "\n" "Options\n" "\n" " This steps allows you to choose whether you want your machine to\n" "automatically switch to a graphical interface at boot. Obviously, you may\n" "want to check \"%s\" if your machine is to act as a server, or if you were\n" "not successful in getting the display configured." msgstr "" #: help.pm:288 #, c-format msgid "" "Monitor\n" "\n" " Normally the installer will automatically detect and configure the\n" "monitor connected to your machine. If it is not correct, you can choose\n" "from this list the monitor which is connected to your computer." msgstr "" "Monitor\n" "\n" " Odatda, o'rnatuvchi kompyuteringizga ulangan monitorni\n" "avtomatik ravishda aniqlaydi va moslaydi. Agar bu noto'g'ri\n" "bo'lsa, aslida ulangan monitorni ro'yxatdan tanlashingiz mumkin." #: help.pm:295 #, c-format msgid "" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "graphics hardware. Choose the one which best suits your needs (you will be\n" "able to make changes after the installation). A sample of the chosen\n" "configuration is shown in the monitor picture." msgstr "" #: help.pm:303 #, c-format msgid "" "In the situation where different servers are available for your card, with\n" "or without 3D acceleration, you're asked to choose the server which best\n" "suits your needs." msgstr "" #: help.pm:308 #, c-format msgid "" "Options\n" "\n" " This steps allows you to choose whether you want your machine to\n" "automatically switch to a graphical interface at boot. Obviously, you may\n" "want to check \"%s\" if your machine is to act as a server, or if you were\n" "not successful in getting the display configured." msgstr "" #: help.pm:316 #, c-format msgid "" "You now need to decide where you want to install the Mandriva Linux\n" "operating system on your hard drive. If your hard drive is empty or if an\n" "existing operating system is using all the available space you will have to\n" "partition the drive. Basically, partitioning a hard drive means to\n" "logically divide it to create the space needed to install your new\n" "Mandriva Linux system.\n" "\n" "Because the process of partitioning a hard drive is usually irreversible\n" "and can lead to data losses, partitioning can be intimidating and stressful\n" "for the inexperienced user. Fortunately, DrakX includes a wizard which\n" "simplifies this process. Before continuing with this step, read through the\n" "rest of this section and above all, take your time.\n" "\n" "Depending on the configuration of your hard drive, several options are\n" "available:\n" "\n" " * \"%s\". This option will perform an automatic partitioning of your blank\n" "drive(s). If you use this option there will be no further prompts.\n" "\n" " * \"%s\". The wizard has detected one or more existing Linux partitions on\n" "your hard drive. If you want to use them, choose this option. You will then\n" "be asked to choose the mount points associated with each of the partitions.\n" "The legacy mount points are selected by default, and for the most part it's\n" "a good idea to keep them.\n" "\n" " * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n" "all the space available on it, you will have to create free space for\n" "GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n" "data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n" "FAT or NTFS partition. Resizing can be performed without the loss of any\n" "data, provided you've previously defragmented the Windows partition.\n" "Backing up your data is strongly recommended. Using this option is\n" "recommended if you want to use both Mandriva Linux and Microsoft Windows on\n" "the same computer.\n" "\n" " Before choosing this option, please understand that after this\n" "procedure, the size of your Microsoft Windows partition will be smaller\n" "than when you started. You'll have less free space under Microsoft Windows\n" "to store your data or to install new software.\n" "\n" " * \"%s\". If you want to delete all data and all partitions present on\n" "your hard drive and replace them with your new Mandriva Linux system, " "choose\n" "this option. Be careful, because you will not be able to undo this " "operation\n" "after you confirm.\n" "\n" " !! If you choose this option, all data on your disk will be deleted. !!\n" "\n" " * \"%s\". This option appears when the hard drive is entirely taken by\n" "Microsoft Windows. Choosing this option will simply erase everything on the\n" "drive and begin fresh, partitioning everything from scratch.\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"%s\". Choose this option if you want to manually partition your hard\n" "drive. Be careful -- it is a powerful but dangerous choice and you can very\n" "easily lose all your data. That's why this option is really only\n" "recommended if you have done something like this before and have some\n" "experience. For more instructions on how to use the DiskDrake utility,\n" "refer to the ``Managing Your Partitions'' section in the ``Starter Guide''." msgstr "" #: help.pm:374 install_interactive.pm:95 #, c-format msgid "Use free space" msgstr "Bo'sh joydan foydalanish" #: help.pm:374 #, c-format msgid "Use existing partition" msgstr "Diskda bor qismlardan foydalanish" #: help.pm:374 install_interactive.pm:137 #, c-format msgid "Use the free space on the Windows partition" msgstr "Diskning Windows qismidagi bo'sh joydan foydalanish" #: help.pm:374 install_interactive.pm:213 #, c-format msgid "Erase entire disk" msgstr "Butun diskni o'chirish" #: help.pm:374 #, c-format msgid "Remove Windows" msgstr "Windows'ni o'chirish" #: help.pm:374 install_interactive.pm:228 #, c-format msgid "Custom disk partitioning" msgstr "Diskni boshqacha bo'lish" #: help.pm:377 #, c-format msgid "" "There you are. Installation is now complete and your GNU/Linux system is\n" "ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n" "to remove the installation media (CD-ROM or floppy). The first thing you\n" "should see after your computer has finished doing its hardware tests is the\n" "boot-loader menu, giving you the choice of which operating system to start.\n" "\n" "The \"%s\" button shows two more buttons to:\n" "\n" " * \"%s\": enables you to create an installation floppy disk which will\n" "automatically perform a whole installation without the help of an operator,\n" "similar to the installation you've just configured.\n" "\n" " Note that two different options are available after clicking on that\n" "button:\n" "\n" " * \"%s\". This is a partially automated installation. The partitioning\n" "step is the only interactive procedure.\n" "\n" " * \"%s\". Fully automated installation: the hard disk is completely\n" "rewritten, all data is lost.\n" "\n" " This feature is very handy when installing on a number of similar\n" "machines. See the Auto install section on our web site for more\n" "information.\n" "\n" " * \"%s\"(*): saves a list of the packages selected in this installation.\n" "To use this selection with another installation, insert the floppy and\n" "start the installation. At the prompt, press the [F1] key, type >>linux\n" "defcfg=\"floppy\"<< and press the [Enter] key.\n" "\n" "(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n" "\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n" "/dev/fd0\"." msgstr "" #: help.pm:409 #, c-format msgid "Generate auto-install floppy" msgstr "Avto-o'rnatish disketni yaratish" #: help.pm:409 install_steps_interactive.pm:1330 #, c-format msgid "Replay" msgstr "Qaytarish" #: help.pm:409 install_steps_interactive.pm:1330 #, c-format msgid "Automated" msgstr "Avtomatik" #: help.pm:409 install_steps_interactive.pm:1333 #, c-format msgid "Save packages selection" msgstr "Paketlar tanlovini saqlash" #: help.pm:412 #, c-format msgid "" "If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n" "reformat some of them and erase any data they contain. To do so, please\n" "select those partitions as well.\n" "\n" "Please note that it's not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to " "reformat\n" "partitions containing data that you wish to keep (typically \"/home\").\n" "\n" "Please be careful when selecting partitions. After the formatting is\n" "completed, all data on the selected partitions will be deleted and you\n" "will not be able to recover it.\n" "\n" "Click on \"%s\" when you're ready to format the partitions.\n" "\n" "Click on \"%s\" if you want to choose another partition for your new\n" "Mandriva Linux operating system installation.\n" "\n" "Click on \"%s\" if you wish to select partitions which will be checked for\n" "bad blocks on the disk." msgstr "" #: help.pm:431 install_steps_gtk.pm:388 interactive.pm:433 #: interactive/newt.pm:318 printer/printerdrake.pm:3676 #: standalone/drakTermServ:362 standalone/drakbackup:3900 #: standalone/drakbackup:3939 standalone/drakbackup:4050 #: standalone/drakbackup:4065 ugtk2.pm:504 #, c-format msgid "Previous" msgstr "Oldingi" #: help.pm:434 #, c-format msgid "" "By the time you install Mandriva Linux, it's likely that some packages will\n" "have been updated since the initial release. Bugs may have been fixed,\n" "security issues resolved. To allow you to benefit from these updates,\n" "you're now able to download them from the Internet. Check \"%s\" if you\n" "have a working Internet connection, or \"%s\" if you prefer to install\n" "updated packages later.\n" "\n" "Choosing \"%s\" will display a list of web locations from which updates can\n" "be retrieved. You should choose one near to you. A package-selection tree\n" "will appear: review the selection, and press \"%s\" to retrieve and install\n" "the selected package(s), or \"%s\" to abort." msgstr "" #: help.pm:444 help.pm:588 install_steps_gtk.pm:387 #: install_steps_interactive.pm:155 standalone/drakbackup:4097 #, c-format msgid "Install" msgstr "O'rnatish" #: help.pm:447 #, c-format msgid "" "At this point, DrakX will allow you to choose the security level you desire\n" "for your machine. As a rule of thumb, the security level should be set\n" "higher if the machine is to contain crucial data, or if it's to be directly\n" "exposed to the Internet. The trade-off that a higher security level is\n" "generally obtained at the expense of ease of use.\n" "\n" "If you do not know what to choose, keep the default option. You'll be able\n" "to change it later with the draksec tool, which is part of Mandriva Linux\n" "Control Center.\n" "\n" "Fill the \"%s\" field with the e-mail address of the person responsible for\n" "security. Security messages will be sent to that address." msgstr "" #: help.pm:458 #, c-format msgid "Security Administrator" msgstr "Xavfsizlik boshqaruvchisi" #: help.pm:461 #, c-format msgid "" "At this point, you need to choose which partition(s) will be used for the\n" "installation of your Mandriva Linux system. If partitions have already been\n" "defined, either from a previous installation of GNU/Linux or by another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"%s\": this option deletes all partitions on the selected hard drive\n" "\n" " * \"%s\": this option enables you to automatically create ext3 and swap\n" "partitions in the free space of your hard drive\n" "\n" "\"%s\": gives access to additional features:\n" "\n" " * \"%s\": saves the partition table to a floppy. Useful for later\n" "partition-table recovery if necessary. It is strongly recommended that you\n" "perform this step.\n" "\n" " * \"%s\": allows you to restore a previously saved partition table from a\n" "floppy disk.\n" "\n" " * \"%s\": if your partition table is damaged, you can try to recover it\n" "using this option. Please be careful and remember that it does not always\n" "work.\n" "\n" " * \"%s\": discards all changes and reloads the partition table that was\n" "originally on the hard drive.\n" "\n" " * \"%s\": un-checking this option will force users to manually mount and\n" "unmount removable media such as floppies and CD-ROMs.\n" "\n" " * \"%s\": use this option if you wish to use a wizard to partition your\n" "hard drive. This is recommended if you do not have a good understanding of\n" "partitioning.\n" "\n" " * \"%s\": use this option to cancel your changes.\n" "\n" " * \"%s\": allows additional actions on partitions (type, options, format)\n" "and gives more information about the hard drive.\n" "\n" " * \"%s\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" "When defining the size of a partition, you can finely set the partition\n" "size by using the Arrow keys of your keyboard.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and the [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected)\n" "\n" " * Ctrl-d to delete a partition\n" "\n" " * Ctrl-m to set the mount point\n" "\n" "To get information about the different file system types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." msgstr "" #: help.pm:530 #, c-format msgid "Removable media auto-mounting" msgstr "" #: help.pm:530 #, c-format msgid "Toggle between normal/expert mode" msgstr "Odiy/ekspert usuliga o'tish" #: help.pm:533 #, c-format msgid "" "More than one Microsoft partition has been detected on your hard drive.\n" "Please choose the one which you want to resize in order to install your new\n" "Mandriva Linux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." msgstr "" #: help.pm:564 #, c-format msgid "" "\"%s\": check the current country selection. If you're not in this country,\n" "click on the \"%s\" button and choose another. If your country is not in " "the\n" "list shown, click on the \"%s\" button to get the complete country list." msgstr "" #: help.pm:569 #, c-format msgid "" "This step is activated only if an existing GNU/Linux partition has been\n" "found on your machine.\n" "\n" "DrakX now needs to know if you want to perform a new installation or an\n" "upgrade of an existing Mandriva Linux system:\n" "\n" " * \"%s\". For the most part, this completely wipes out the old system.\n" "However, depending on your partitioning scheme, you can prevent some of\n" "your existing data (notably \"home\" directories) from being over-written.\n" "If you wish to change how your hard drives are partitioned, or to change\n" "the file system, you should use this option.\n" "\n" " * \"%s\". This installation class allows you to update the packages\n" "currently installed on your Mandriva Linux system. Your current " "partitioning\n" "scheme and user data will not be altered. Most of the other configuration\n" "steps remain available and are similar to a standard installation.\n" "\n" "Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n" "running version \"8.1\" or later. Performing an upgrade on versions prior\n" "to Mandriva Linux version \"8.1\" is not recommended." msgstr "" #: help.pm:591 #, c-format msgid "" "Depending on the language you chose (), DrakX will automatically select a\n" "particular type of keyboard configuration. Check that the selection suits\n" "you or choose another keyboard layout.\n" "\n" "Also, you may not have a keyboard which corresponds exactly to your\n" "language: for example, if you are an English-speaking Swiss native, you may\n" "have a Swiss keyboard. Or if you speak English and are located in Quebec,\n" "you may find yourself in the same situation where your native language and\n" "country-set keyboard do not match. In either case, this installation step\n" "will allow you to select an appropriate keyboard from a list.\n" "\n" "Click on the \"%s\" button to be shown a list of supported keyboards.\n" "\n" "If you choose a keyboard layout based on a non-Latin alphabet, the next\n" "dialog will allow you to choose the key binding which will switch the\n" "keyboard between the Latin and non-Latin layouts." msgstr "" #: help.pm:609 #, c-format msgid "" "The first step is to choose your preferred language.\n" "\n" "Your choice of preferred language will affect the installer, the\n" "documentation, and the system in general. First select the region you're\n" "located in, then the language you speak.\n" "\n" "Clicking on the \"%s\" button will allow you to select other languages to\n" "be installed on your workstation, thereby installing the language-specific\n" "files for system documentation and applications. For example, if Spanish\n" "users are to use your machine, select English as the default language in\n" "the tree view and \"%s\" in the Advanced section.\n" "\n" "About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n" "cover all existing languages. However full support for it in GNU/Linux is\n" "still under development. For that reason, Mandriva Linux's use of UTF-8 " "will\n" "depend on the user's choices:\n" "\n" " * If you choose a language with a strong legacy encoding (latin1\n" "languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n" "iso-8859-2 languages), the legacy encoding will be used by default;\n" "\n" " * Other languages will use unicode by default;\n" "\n" " * If two or more languages are required, and those languages are not using\n" "the same encoding, then unicode will be used for the whole system;\n" "\n" " * Finally, unicode can also be forced for use throughout the system at a\n" "user's request by selecting the \"%s\" option independently of which\n" "languages were been chosen.\n" "\n" "Note that you're not limited to choosing a single additional language. You\n" "may choose several, or even install them all by selecting the \"%s\" box.\n" "Selecting support for a language means translations, fonts, spell checkers,\n" "etc. will also be installed for that language.\n" "\n" "To switch between the various languages installed on your system, you can\n" "launch the \"localedrake\" command as \"root\" to change the language used\n" "by the entire system. Running the command as a regular user will only\n" "change the language settings for that particular user." msgstr "" #: help.pm:647 #, c-format msgid "Espanol" msgstr "" #: help.pm:650 #, c-format msgid "" "Usually, DrakX has no problems detecting the number of buttons on your\n" "mouse. If it does, it assumes you have a two-button mouse and will\n" "configure it for third-button emulation. The third-button mouse button of a\n" "two-button mouse can be obtained by simultaneously clicking the left and\n" "right mouse buttons. DrakX will automatically know whether your mouse uses\n" "a PS/2, serial or USB interface.\n" "\n" "If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n" "mouse. DrakX will then configure your mouse so that you can simulate the\n" "wheel with it: to do so, press the middle button and move your mouse\n" "pointer up and down.\n" "\n" "If for some reason you wish to specify a different type of mouse, select it\n" "from the list provided.\n" "\n" "You can select the \"%s\" entry to chose a ``generic'' mouse type which\n" "will work with nearly all mice.\n" "\n" "If you choose a mouse other than the default one, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct and that the mouse is working correctly. If the mouse is not\n" "working well, press the space bar or [Return] key to cancel the test and\n" "you will be returned to the mouse list.\n" "\n" "Occasionally wheel mice are not detected automatically, so you will need to\n" "select your mouse from a list. Be sure to select the one corresponding to\n" "the port that your mouse is attached to. After selecting a mouse and\n" "pressing the \"%s\" button, a mouse image will be displayed on-screen.\n" "Scroll the mouse wheel to ensure that it is activating correctly. As you\n" "scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n" "Test the buttons and check that the mouse pointer moves on-screen as you\n" "move your mouse about." msgstr "" #: help.pm:681 #, c-format msgid "with Wheel emulation" msgstr "" #: help.pm:681 #, c-format msgid "Universal | Any PS/2 & USB mice" msgstr "Istagan PS/2 va USB sichqoncha" #: help.pm:684 #, c-format msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." msgstr "" "Iltimos to'g'ri portni tanlang. Masalan, Windows'dagi \"COM1\"\n" "portining nomi GNU/Linux'da \"ttyS0\"." #: help.pm:688 #, c-format msgid "" "This is the most crucial decision point for the security of your GNU/Linux\n" "system: you must enter the \"root\" password. \"Root\" is the system\n" "administrator and is the only user authorized to make updates, add users,\n" "change the overall system configuration, and so on. In short, \"root\" can\n" "do everything! That's why you must choose a password which is difficult to\n" "guess: DrakX will tell you if the password you chose is too simple. As you\n" "can see, you're not forced to enter a password, but we strongly advise\n" "against this. GNU/Linux is just as prone to operator error as any other\n" "operating system. Since \"root\" can overcome all limitations and\n" "unintentionally erase all data on partitions by carelessly accessing the\n" "partitions themselves, it is important that it be difficult to become\n" "\"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password -- it makes it far\n" "too easy to compromise your system.\n" "\n" "One caveat: do not make the password too long or too complicated because " "you\n" "must be able to remember it!\n" "\n" "The password will not be displayed on screen as you type it. To reduce the\n" "chance of a blind typing error you'll need to enter the password twice. If\n" "you do happen to make the same typing error twice, you'll have to use this\n" "``incorrect'' password the first time you'll try to connect as \"root\".\n" "\n" "If you want an authentication server to control access to your computer,\n" "click on the \"%s\" button.\n" "\n" "If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" "services, select the appropriate one for \"%s\". If you do not know which\n" "one to use, you should ask your network administrator.\n" "\n" "If you happen to have problems with remembering passwords, or if your\n" "computer will never be connected to the Internet and you absolutely trust\n" "everybody who uses your computer, you can choose to have \"%s\"." msgstr "" #: help.pm:722 #, c-format msgid "authentication" msgstr "tasdiqlash" #: help.pm:725 #, c-format msgid "" "A boot loader is a little program which is started by the computer at boot\n" "time. It's responsible for starting up the whole system. Normally, the boot\n" "loader installation is totally automated. DrakX will analyze the disk boot\n" "sector and act according to what it finds there:\n" "\n" " * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n" "boot sector. This way you'll be able to load either GNU/Linux or any other\n" "OS installed on your machine.\n" "\n" " * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n" "\n" "If DrakX can not determine where to place the boot sector, it'll ask you\n" "where it should place it. Generally, the \"%s\" is the safest place.\n" "Choosing \"%s\" will not install any boot loader. Use this option only if " "you\n" "know what you're doing." msgstr "" #: help.pm:742 #, c-format msgid "" "Now, it's time to select a printing system for your computer. Other\n" "operating systems may offer you one, but Mandriva Linux offers two. Each of\n" "the printing systems is best suited to particular types of configuration.\n" "\n" " * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n" "if you have a direct connection to your printer, you want to be able to\n" "panic out of printer jams, and you do not have networked printers. (\"%s\"\n" "will handle only very simple network cases and is somewhat slow when used\n" "within networks.) It's recommended that you use \"pdq\" if this is your\n" "first experience with GNU/Linux.\n" "\n" " * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n" "choice for printing to your local printer or to one halfway around the\n" "planet. It's simple to configure and can act as a server or a client for\n" "the ancient \"lpd\" printing system, so it's compatible with older\n" "operating systems which may still need print services. While quite\n" "powerful, the basic setup is almost as easy as \"pdq\". If you need to\n" "emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n" "\"%s\" includes graphical front-ends for printing or choosing printer\n" "options and for managing the printer.\n" "\n" "If you make a choice now, and later find that you do not like your printing\n" "system you may change it by running PrinterDrake from the Mandriva Linux\n" "Control Center and clicking on the \"%s\" button." msgstr "" #: help.pm:765 #, c-format msgid "pdq" msgstr "" #: help.pm:765 printer/cups.pm:115 printer/data.pm:122 #, c-format msgid "CUPS" msgstr "CUPS" #: help.pm:765 #, c-format msgid "Expert" msgstr "Ekspert" #: help.pm:768 #, c-format msgid "" "DrakX will first detect any IDE devices present in your computer. It will\n" "also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection is not foolproof, DrakX may fail in detecting\n" "your hard drives. If so, you'll have to specify your hardware by hand.\n" "\n" "If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n" "want to configure options for it. You should allow DrakX to probe the\n" "hardware for the card-specific options which are needed to initialize the\n" "adapter. Most of the time, DrakX will get through this step without any\n" "issues.\n" "\n" "If DrakX is not able to probe for the options to automatically determine\n" "which parameters need to be passed to the hardware, you'll need to manually\n" "configure the driver." msgstr "" #: help.pm:786 #, c-format msgid "" "\"%s\": if a sound card is detected on your system, it'll be displayed\n" "here. If you notice the sound card is not the one actually present on your\n" "system, you can click on the button and choose a different driver." msgstr "" "\"%s\": agar kompyuterda tovush kartasi aniqlansa u shu erda ko'rsatiladi.\n" "Agar ko'rsatilgan tovush kartasi kompyuterdagi tovush kartasi\n" "bilan mos kelmasa, tugmani bosib boshqa drayverni tanlashingiz mumkin." #: help.pm:788 help.pm:855 install_steps_interactive.pm:1011 #: install_steps_interactive.pm:1028 #, c-format msgid "Sound card" msgstr "Tovush karta" #: help.pm:791 #, c-format msgid "" "As a review, DrakX will present a summary of information it has gathered\n" "about your system. Depending on the hardware installed on your machine, you\n" "may have some or all of the following entries. Each entry is made up of the\n" "hardware item to be configured, followed by a quick summary of the current\n" "configuration. Click on the corresponding \"%s\" button to make the change.\n" "\n" " * \"%s\": check the current keyboard map configuration and change it if\n" "necessary.\n" "\n" " * \"%s\": check the current country selection. If you're not in this\n" "country, click on the \"%s\" button and choose another. If your country\n" "is not in the list shown, click on the \"%s\" button to get the complete\n" "country list.\n" "\n" " * \"%s\": by default, DrakX deduces your time zone based on the country\n" "you have chosen. You can click on the \"%s\" button here if this is not\n" "correct.\n" "\n" " * \"%s\": verify the current mouse configuration and click on the button\n" "to change it if necessary.\n" "\n" " * \"%s\": clicking on the \"%s\" button will open the printer\n" "configuration wizard. Consult the corresponding chapter of the ``Starter\n" "Guide'' for more information on how to set up a new printer. The interface\n" "presented in our manual is similar to the one used during installation.\n" "\n" " * \"%s\": if a sound card is detected on your system, it'll be displayed\n" "here. If you notice the sound card is not the one actually present on your\n" "system, you can click on the button and choose a different driver.\n" "\n" " * \"%s\": if you have a TV card, this is where information about its\n" "configuration will be displayed. If you have a TV card and it is not\n" "detected, click on \"%s\" to try to configure it manually.\n" "\n" " * \"%s\": you can click on \"%s\" to change the parameters associated with\n" "the card if you feel the configuration is wrong.\n" "\n" " * \"%s\": by default, DrakX configures your graphical interface in\n" "\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n" "\"%s\" to reconfigure your graphical interface.\n" "\n" " * \"%s\": if you wish to configure your Internet or local network access,\n" "you can do so now. Refer to the printed documentation or use the\n" "Mandriva Linux Control Center after the installation has finished to " "benefit\n" "from full in-line help.\n" "\n" " * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n" "you're installing on is to be located behind a proxy server.\n" "\n" " * \"%s\": this entry allows you to redefine the security level as set in a\n" "previous step ().\n" "\n" " * \"%s\": if you plan to connect your machine to the Internet, it's a good\n" "idea to protect yourself from intrusions by setting up a firewall. Consult\n" "the corresponding section of the ``Starter Guide'' for details about\n" "firewall settings.\n" "\n" " * \"%s\": if you wish to change your bootloader configuration, click this\n" "button. This should be reserved to advanced users. Refer to the printed\n" "documentation or the in-line help about bootloader configuration in the\n" "Mandriva Linux Control Center.\n" "\n" " * \"%s\": through this entry you can fine tune which services will be run\n" "on your machine. If you plan to use this machine as a server it's a good\n" "idea to review this setup." msgstr "" #: help.pm:855 install_steps_interactive.pm:970 standalone/drakclock:100 #, c-format msgid "Timezone" msgstr "Vaqt zonasi" #: help.pm:855 install_steps_interactive.pm:1044 #, c-format msgid "TV card" msgstr "TV karta" #: help.pm:855 #, c-format msgid "ISDN card" msgstr "ISDN karta" #: help.pm:855 #, c-format msgid "Graphical Interface" msgstr "Grafik interfeys" #: help.pm:855 install_any.pm:1688 install_steps_interactive.pm:1062 #: standalone/drakbackup:2021 #, c-format msgid "Network" msgstr "Tarmoq" #: help.pm:855 install_steps_interactive.pm:1074 #, c-format msgid "Proxies" msgstr "Proksilar" #: help.pm:855 install_steps_interactive.pm:1085 #, c-format msgid "Security Level" msgstr "Xavfsizlik darajasi" #: help.pm:855 install_steps_interactive.pm:1099 #, c-format msgid "Firewall" msgstr "Fayervol" #: help.pm:855 install_steps_interactive.pm:1115 #, c-format msgid "Bootloader" msgstr "OT yuklagichi" #: help.pm:855 install_steps_interactive.pm:1128 services.pm:193 #, c-format msgid "Services" msgstr "Xizmatlar" #: help.pm:858 #, c-format msgid "" "Choose the hard drive you want to erase in order to install your new\n" "Mandriva Linux partition. Be careful, all data on this drive will be lost\n" "and will not be recoverable!" msgstr "" #: help.pm:863 #, c-format msgid "" "Click on \"%s\" if you want to delete all data and partitions present on\n" "this hard drive. Be careful, after clicking on \"%s\", you will not be able\n" "to recover any data and partitions present on this hard drive, including\n" "any Windows data.\n" "\n" "Click on \"%s\" to quit this operation without losing data and partitions\n" "present on this hard drive." msgstr "" "Bu diskdagi barcha ma'lumotni va diskning barcha qismlarini\n" "o'chirish uchun \"%s\"ni bosing. Ehtiyot bo'ling, \"%s\"ni bosganingizdan\n" "keyin diskdagi ma'lumotni va diskning qismlarini, shu jumlada\n" "Windows ma'lumotini ham, tiklab bo'lmaydi.\n" "\n" "Ma'lumotni va diskning barcha qismlarini yo'qotmasdan bu\n" "operatsiyani to'xtatish uchun \"%s\"ni bosing." #: help.pm:869 #, c-format msgid "Next ->" msgstr "Keyingi ->" #: help.pm:869 #, c-format msgid "<- Previous" msgstr "<- Oldingi" #: install2.pm:115 #, c-format msgid "" "Can not access kernel modules corresponding to your kernel (file %s is " "missing), this generally means your boot floppy in not in sync with the " "Installation medium (please create a newer boot floppy)" msgstr "" #: install2.pm:169 #, c-format msgid "You must also format %s" msgstr "Siz %s'ni ham format qilishingiz kerak" #: install_any.pm:405 #, c-format msgid "Do you have further supplementary media?" msgstr "Sizda qo'shimcha kompakt-disk bormi?" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_any.pm:408 #, c-format msgid "" "The following media have been found and will be used during install: %s.\n" "\n" "\n" "Do you have a supplementary installation media to configure?" msgstr "" "O'rnatish uchun ishlatiladigan quyidagi manba topildi: %s\n" "\n" "\n" "Sizda qo'shimchi manba bormi?" #: install_any.pm:421 printer/printerdrake.pm:3022 #: printer/printerdrake.pm:3029 standalone/scannerdrake:182 #: standalone/scannerdrake:190 standalone/scannerdrake:241 #: standalone/scannerdrake:248 #, c-format msgid "CD-ROM" msgstr "Kompakt-disk" #: install_any.pm:421 #, c-format msgid "Network (HTTP)" msgstr "Tarmoq (HTTP)" #: install_any.pm:421 #, c-format msgid "Network (FTP)" msgstr "Tarmoq (FTP)" #: install_any.pm:421 #, c-format msgid "Network (NFS)" msgstr "" #: install_any.pm:451 #, c-format msgid "Insert the CD 1 again" msgstr "" #: install_any.pm:477 standalone/drakbackup:112 #, c-format msgid "No device found" msgstr "Hech qanday uskuna topilmadi" #: install_any.pm:482 #, c-format msgid "Insert the CD" msgstr "" #: install_any.pm:487 #, c-format msgid "Unable to mount CD-ROM" msgstr "" #: install_any.pm:520 install_any.pm:539 #, c-format msgid "URL of the mirror?" msgstr "" #: install_any.pm:525 #, c-format msgid "NFS setup" msgstr "" #: install_any.pm:525 #, c-format msgid "Please enter the hostname and directory of your NFS media" msgstr "" #: install_any.pm:526 #, c-format msgid "Hostname of the NFS mount ?" msgstr "" #: install_any.pm:526 #, c-format msgid "Directory" msgstr "" #: install_any.pm:575 #, fuzzy, c-format msgid "" "Can't find a package list file on this mirror. Make sure the location is " "correct." msgstr "%s'ni %s'da topib bo'lmadi." #: install_any.pm:740 #, c-format msgid "" "Change your Cd-Rom!\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done." msgstr "" "Kompakt-diskni almashtiring!\n" "\n" "Iltimos '%s' belgili kompakt-diskni qo'ying va \"Ok\" tugmasini bosing." #: install_any.pm:753 #, fuzzy, c-format msgid "Copying in progress" msgstr "Aniqlash ketayapti" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_any.pm:895 #, c-format msgid "" "You have selected the following server(s): %s\n" "\n" "\n" "These servers are activated by default. They do not have any known security\n" "issues, but some new ones could be found. In that case, you must make sure\n" "to upgrade as soon as possible.\n" "\n" "\n" "Do you really want to install these servers?\n" msgstr "" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_any.pm:918 #, c-format msgid "" "The following packages will be removed to allow upgrading your system: %s\n" "\n" "\n" "Do you really want to remove these packages?\n" msgstr "" "Tizimni yangilash uchun quyidagi paketlar o'chiriladi: %s\n" "\n" "\n" "Davom etishni istaysizmi?\n" #: install_any.pm:1354 partition_table.pm:597 #, c-format msgid "Error reading file %s" msgstr "%s faylini o'qishda xato ro'y berdi" #: install_any.pm:1585 #, fuzzy, c-format msgid "The following disk(s) were renamed:" msgstr "Quyidagi paketlarni o'rnatish kerak:\n" #: install_any.pm:1587 #, c-format msgid "%s (previously named as %s)" msgstr "" #: install_any.pm:1625 #, c-format msgid "" "An error occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" #: install_any.pm:1669 #, c-format msgid "HTTP" msgstr "" #: install_any.pm:1669 #, fuzzy, c-format msgid "FTP" msgstr "gFTP" #: install_any.pm:1669 #, fuzzy, c-format msgid "NFS" msgstr "PFS" #: install_any.pm:1692 #, fuzzy, c-format msgid "Please choose a media" msgstr "Iltimos tanlang" #: install_any.pm:1708 #, fuzzy, c-format msgid "File already exists. Overwrite it?" msgstr "Fayl allaqachon mavjud. Ishlataymi?" #: install_any.pm:1712 #, c-format msgid "Permission denied" msgstr "Ruxsat yo'q" #: install_any.pm:1761 #, c-format msgid "Bad NFS name" msgstr "" #: install_any.pm:1782 #, fuzzy, c-format msgid "Bad media %s" msgstr "%s manbasi qo'shildi" #: install_any.pm:1829 #, c-format msgid "Can not make screenshots before partitioning" msgstr "" #: install_any.pm:1836 #, c-format msgid "Screenshots will be available after install in %s" msgstr "" #: install_gtk.pm:136 #, c-format msgid "System installation" msgstr "Tizimni o'rnatish" #: install_gtk.pm:139 #, c-format msgid "System configuration" msgstr "Tizimni moslash" #: install_interactive.pm:22 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" #: install_interactive.pm:62 #, c-format msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" "Sizda diskning tub qismi bo'lishi shart.\n" "Buning uchun, diskda yangi qism yarating (yoki borini tanlang).\n" "Keyin, \"Ulash niqtasi\" amalini tanlang va uni \"/\"ga o'rnating" #: install_interactive.pm:67 #, c-format msgid "" "You do not have a swap partition.\n" "\n" "Continue anyway?" msgstr "" "Sizda diskning svop qismi yo'q.\n" "\n" "Bunga qaramasdan davom etishni istaysizmi?" #: install_interactive.pm:70 install_steps.pm:218 #, c-format msgid "You must have a FAT partition mounted in /boot/efi" msgstr "Sizda /boot/efi nuqtasiga ulangan diskning FAT qismi bo'lishi shart" #: install_interactive.pm:97 #, c-format msgid "Not enough free space to allocate new partitions" msgstr "Yangi qism yaratish uchun diskda etarli joy yo'q" #: install_interactive.pm:105 #, c-format msgid "Use existing partitions" msgstr "Diskda bor qismlardan foydalanish" #: install_interactive.pm:107 #, c-format msgid "There is no existing partition to use" msgstr "Foydalanish uchun diskning qismi mavjud emas" #: install_interactive.pm:114 #, c-format msgid "Use the Windows partition for loopback" msgstr "Loopback uchun diskning Windows qismini ishlatish" #: install_interactive.pm:117 #, c-format msgid "Which partition do you want to use for Linux4Win?" msgstr "Linux4Win uchun diskning qaysi qismini ishlatmoqchisiz?" #: install_interactive.pm:119 #, c-format msgid "Choose the sizes" msgstr "Hajmni tanlash" #: install_interactive.pm:120 #, c-format msgid "Root partition size in MB: " msgstr "Diskning tub qismi Mb'da: " #: install_interactive.pm:121 #, c-format msgid "Swap partition size in MB: " msgstr "Diskning swap qismi Mb'da: " #: install_interactive.pm:130 #, c-format msgid "There is no FAT partition to use as loopback (or not enough space left)" msgstr "" "Loopback sifatida ishlatish uchun diskda FAT qism yo'q (yoki etarli joy yo'q)" #: install_interactive.pm:139 #, c-format msgid "Which partition do you want to resize?" msgstr "Diskning qaysi qismining hajmini o'zgartirmoqchisiz?" #: install_interactive.pm:153 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occurred: %s" msgstr "" #: install_interactive.pm:156 #, c-format msgid "Computing the size of the Windows partition" msgstr "Diskning Windows qismining hajmi hisoblanmoqda" #: install_interactive.pm:163 #, c-format msgid "" "Your Windows partition is too fragmented. Please reboot your computer under " "Windows, run the ``defrag'' utility, then restart the Mandriva Linux " "installation." msgstr "" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_interactive.pm:166 #, c-format msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful: this\n" "operation is dangerous. If you have not already done so, you\n" "first need to exit the installation, run \"chkdsk c:\" from a\n" "Command Prompt under Windows (beware, running graphical program\n" "\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n" "Command Prompt!), optionally run defrag, then restart the\n" "installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" #: install_interactive.pm:178 #, c-format msgid "Which size do you want to keep for Windows on" msgstr "" #: install_interactive.pm:179 #, c-format msgid "partition %s" msgstr "diskning %s qismi" #: install_interactive.pm:188 #, c-format msgid "Resizing Windows partition" msgstr "Diskning Windows qismining hajmini o'zgartirish" #: install_interactive.pm:193 #, c-format msgid "FAT resizing failed: %s" msgstr "Diskning FAT qismining hajmini o'zgartirish muvaffaqiyatsiz tugadi: %s" #: install_interactive.pm:208 #, c-format msgid "There is no FAT partition to resize (or not enough space left)" msgstr "" "Hajmini o'zgartirish uchu diskda FAT qism mavjud emas (yoki etarli joy " "mavjud emas)" #: install_interactive.pm:213 #, c-format msgid "Remove Windows(TM)" msgstr "Windows(TM)'ni o'chirish" #: install_interactive.pm:215 #, c-format msgid "You have more than one hard drive, which one do you install linux on?" msgstr "" "Sizda bittadan ko'p qattiq disk mavjud. Ularni qaysiga Linux'ni o'rnatasiz?" #: install_interactive.pm:219 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "%s diskning barcha qismlari va ulardagi barcha ma'lumot o'chiriladi" #: install_interactive.pm:232 #, c-format msgid "Use fdisk" msgstr "Fdisk dasturidan foydalanish" #: install_interactive.pm:235 #, c-format msgid "" "You can now partition %s.\n" "When you are done, do not forget to save using `w'" msgstr "" "Endi siz %s diskni bo'lishingiz mumkin.\n" "Tugatgach \"w\" bilan saqlash esingizdan chiqmasin." #: install_interactive.pm:271 #, c-format msgid "I can not find any room for installing" msgstr "O'rnatish uchun joy topilmadi" #: install_interactive.pm:275 #, c-format msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "DrakX diskni bo'lish yordamchisi quyidagi echimlarni topdi:" #: install_interactive.pm:281 #, c-format msgid "Partitioning failed: %s" msgstr "Diskni bo'lish muvaffaqiyatsiz tugadi: %s" #: install_interactive.pm:288 #, c-format msgid "Bringing up the network" msgstr "Tarmoq ishga tushirilmoqda" #: install_interactive.pm:293 #, c-format msgid "Bringing down the network" msgstr "Tarmoq o'chirilmoqda" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_messages.pm:10 #, c-format msgid "" "Introduction\n" "\n" "The operating system and the different components available in the Mandriva " "Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandriva Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "Mandriva S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "Mandriva S.A. will, in no circumstances and to the extent permitted by law, " "be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if Mandriva S.A. has been advised of the possibility or " "occurrence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, Mandriva S.A. or its distributors will, in " "no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandriva Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to Mandriva.\n" "The programs developed by Mandriva S.A. are governed by the GPL License. " "Documentation written \n" "by Mandriva S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "Mandriva S.A. reserves its rights to modify or adapt the Software Products, " "as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of " "Mandriva S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact Mandriva S.A. \n" msgstr "" "Kirish\n" "\n" "Mandriva Linux distributivida mavjud bo'lgan operatsion tizim va uning turli " "qismlari \n" "bundan buyon \"Dasturiy Mahsulotlar\" deb yuritiladi. Dasturiy mahsulotlar \n" "Mandriva Linux distributivning qismlari va operatsion tizim bilan bog'liq " "bo'lgan\n" "dasturlar to'plami, usullar, qoidalar va qo'llanmalarni o'z ichiga oladi, " "ammo bu bilan cheklanmaydi.\n" "\n" "\n" "1. Litsenziya kelishuvi\n" "\n" "Iltimos, ushbu hujjatni diqqat bilan o'qib chiqing. Bu hujjat Siz bilan " "Mandriva S.A. \n" "o'rtasida Dasturiy Mahsulotlari bo'yicha imzolanadigan litsenziya " "kelishuvidir.\n" "Dasturiy Mahsulotlarni har qanday maqsad bilan o'rnatib, ko'paytirib yoki \n" "ulardan foydalanib Siz mazkur Litsenziyaning shartlari va qoidalarini to'liq " "qabul \n" "qilib, ularga rozi ekanligingizni bildirgan bo'lasiz. Agar mazkur \n" "Litsenziyaning biror qismi Sizga to'g'ri kelmasa, u holda Sizga Dasturiy " "Mahsulotlarni\n" "o'rnatish, ko'paytirish yoki ulardan foydalanishga ruxsat berilmaydi. Mazkur " "litsenziyaning \n" "shartlariga zid holda Dasturiy Mahsulotlarni o'rnatish, ko'paytirish va " "ulardan foydalanishga \n" "har qanday urinish ushbu Litsenziya asosida Sizga berilgan barcha " "huquqlarni\n" "bekor qiladi. Litsenziya kelishuvi bekor qilingach, Siz Dasturiy " "Mahsulotlarning\n" "barcha nusxalarini darhol o'chirib tashlashingiz lozim.\n" "\n" "\n" "2. Cheklangan kafolat majburiyatlari\n" "\n" "Dasturiy Mahsulotlar va ularga ilova qilingan qo'llanmalar \"o'z holicha\", " "qonunda yo'l qo'yilgan\n" "darajada hech qanday kafolatlarsiz taqdim qilinadi. Mandriva S.A. qonunda " "yo'l qo'yilgan\n" "darajada hech qanday holatda Dasturiy Mahsulotlardan foydalanish yoki " "foydalanmaslik oqibatida\n" "tasodifiy, to'g'ridan-to'g'ri, bevosita yoki bilvosita etkazilgan zararlar " "(shu jumladan biznesning\n" "kasod bo'lishi, tijorat faoliyatidagi uzilishlar, moliyaviy zararlar, sud " "mahkamalari natijasidagi\n" "sud xarajatlari yoki jarimalar yoki boshqa har qanday bilvosita " "yo'qotishlar) uchun, hatto Mandriva S.A.'ga\n" "shunday zarar ko'rish imkoniyati yoki holatlari ma'lum bo'lgan taqdirda " "ham,\n" "javobgar bo'lmaydi.\n" "\n" "BA'ZI MAMLAKATLARDA MAN QILINGAN DASTURIY MAHSULOTLARGA EGALIK QILISh\n" "YoKI ULARDAN FOYDALANISh BILAN BOG'LIQ ChEKLANGAN MAS'ULIYaT\n" "\n" "Mandriva S.A. yoki uning tarqatuvchilari qonunda yo'l qo'yilgan darajada " "hech qanday holatda\n" "ba'zi mamlakatlarning mahalliy qonunlari bilan cheklangan yoki man qilingan " "dasturiy\n" "mahsulotlarning qismlariga egalik qilish va ulardan foydalanish, yoki " "Mandriva Linux\n" "saytlarining biridan dasturiy mahsulotning qismlarini ko'chirib olish " "oqibatida tasodifiy,\n" "to'g'ridan-to'g'ri, bevosita yoki bilvosita etkazilgan zararlar (shu " "jumladan biznesning kasod bo'lishi,\n" "tijorat faoliyatidagi uzilishlar, moliyaviy zararlar, sud mahkamalari " "natijasidagi sud\n" "xarajatlari yoki jarimalar yoki boshqa har qanday bilvosita yo'qotishlar) " "uchun javobgar bo'lmaydi.\n" "Cheklangan ma'suliyat Dasturiy Mahsulotlarga kiritiladigan kuchli " "kriptografiya qismlariga\n" "nisbatan ham qo'llaniladi, ammo bu bilan cheklanmaydi.\n" "\n" "\n" "3. GPL litsenziyasi va unga bog'liq litsenziyalar\n" "\n" "Dasturiy Mahsulotlar turli kishilar yoki tashkilotlar tomonidan yaratilgan " "qismlardan iboratdir.\n" "Ushbu qismlarning ko'pchiligi bundan buyon \"GPL\" deb ataladigan GNU " "General Public Licence\n" "shartlari va qoidalari yoki shunga o'xshash litsenziyalar ta'siri ostidadir. " "Ushbu litsenziyalarning\n" "ko'pchiligi o'z ta'siri ostidagi qismlarni Sizga foydalanish, ko'paytirish, " "moslashtirish yoki tarqatish\n" "huquqini beradi. Iltimos, har qanday qismdan foydalanishdan avval " "qismlarning har biri\n" "uchun litsenziya kelishuvining shartlari va qoidalarini diqqat bilan o'qib " "chiqing. Qismning\n" "litsenziyasiga oid har qanday savollar Mandriva'ga emas, balki qismning " "muallifiga yuborilishi\n" "lozim. Mandriva S.A. tomonidan ishlab chiqilgan dasturlar GPL litsenziyasi " "ta'siri\n" "ostidadir. Mandriva S.A. tomonidan yozilgan qo'llanmalar esa maxsus " "litsenziya ta'siri\n" "ostidadir. Iltimos, qo'shimcha ma'lumot uchun qo'llanmalarga murojaat " "qiling.\n" "\n" "\n" "4. Intellektual mulk huquqlari\n" "\n" "Dasturiy Mahsulotlarning qismlariga oid barcha huquqlar ularning bevosita " "mualliflariga\n" "tegishli bo'lib, intellektual mulk va dasturiy mahsulotlarga oid mualliflik " "huquqi\n" "to'g'risidagi qonunlar bilan himoyalanadi. Mandriva S.A. Dasturiy " "Mahsulotlarni to'liq\n" "yoki qisman, har qanday yo'l bilan va istalgan maqsadlarda o'zgartirish yoki " "moslashtirish huquqini\n" "o'zida saqlab qoladi. \"Mandriva\", \"Mandriva Linux\" va tegishli belgilar " "Mandriva S.A.'ga\n" "tegishli savdo belgilaridir.\n" "\n" "\n" "5. Boshqaruvchi qonunlar\n" "\n" "Agar mazkur kelishuvning biror qismi sud qarori bilan bekor qilinsa, " "noqonuniy yoki\n" "amaldagi qonunchilikka zid topilsa, bu qism mazkur kelishuvdan chiqarib " "tashlanadi. Sizning\n" "hatti-harakatlaringiz kelishuvning boshqa yaroqli bo'limlari bilan cheklanib " "qolaveradi.\n" "Mazkur Litsenziyaning shartlari va qoidalari Frantsiya qonunchiligi ta'siri " "ostidadir.\n" "Mazkur litsenziyaning shartlari va qoidalariga oid har qanday nizolar asosan " "sudda muhokama qilinadi.\n" "So'nggi navbatda masalaning ko'rilishi tegishli Parij (Frantsiya) " "Qonunchilik sudiga havola qilinadi.\n" "Iltimos, mazkur hujjatga oid har qanday savollar bo'yicha Mandriva S.A. " "bilan bog'laning.\n" #: install_messages.pm:90 #, c-format msgid "" "Warning: Free Software may not necessarily be patent free, and some Free\n" "Software included may be covered by patents in your country. For example, " "the\n" "MP3 decoders included may require a licence for further usage (see\n" "http://www.mp3licensing.com for more details). If you are unsure if a " "patent\n" "may be applicable to you, check your local laws." msgstr "" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_messages.pm:98 #, c-format msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" #: install_messages.pm:131 #, c-format msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "\n" "For information on fixes which are available for this release of Mandriva " "Linux,\n" "consult the Errata available from:\n" "\n" "\n" "%s\n" "\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Mandriva Linux User's Guide." msgstr "" "Tabriklaymiz! O'rnatish tugadi.\n" "Yuklovchi manbani olib tashlang va kompyuterni\n" "o'chirib-yoqish uchun ENTER tugmasini bosing.\n" "\n" "\n" "Mandriva Linux'ninig bu versiyasi uchun yangilanishlar haqida\n" "ma'lumot quyidagi Errata veb-sahifasida mavjud:\n" "\n" "\n" "%s\n" "\n" "\n" "Tizimni moslash haqida ma'lumot Mandriva Linux\n" "foydalanuvchilari uchun rasmiy qo'llanmasida mavjud." #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_messages.pm:144 #, c-format msgid "http://www.mandrivalinux.com/en/errata.php3" msgstr "http://www.mandrivalinux.com/en/errata.php3" #: install_steps.pm:253 #, c-format msgid "Duplicate mount point %s" msgstr "Bir hil ulash nuqtalari %s" #: install_steps.pm:469 #, c-format msgid "" "Some important packages did not get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm" "\"\n" msgstr "" "Ba'zi bir muhim paketlar to'g'ri o'rnatilmadi.\n" "Sizning kompakt-disk uskunangizda yoki kompakt-diskingizda xato bor.\n" "Kompakt-diskni o'rnatilgan kompyuterda \"rpm -qpl media/main/*.rpm\" " "buyrug'i bilan tekshirib ko'ring.\n" #: install_steps_auto_install.pm:75 install_steps_stdio.pm:27 #, c-format msgid "Entering step `%s'\n" msgstr "%s bosqichga o'tilmoqda\n" #: install_steps_gtk.pm:177 #, c-format msgid "" "Your system is low on resources. You may have some problem installing\n" "Mandriva Linux. If that occurs, you can try a text install instead. For " "this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" #: install_steps_gtk.pm:224 install_steps_interactive.pm:624 #, c-format msgid "Package Group Selection" msgstr "Paketlarni guruh bo'yicha tanlash" #: install_steps_gtk.pm:250 install_steps_interactive.pm:567 #, c-format msgid "Total size: %d / %d MB" msgstr "Jami: %d / %d Mb" #: install_steps_gtk.pm:295 #, c-format msgid "Bad package" msgstr "Yomon paket" #: install_steps_gtk.pm:297 #, c-format msgid "Version: " msgstr "Versiyasi: " #: install_steps_gtk.pm:298 #, c-format msgid "Size: " msgstr "Hajmi: " #: install_steps_gtk.pm:298 #, c-format msgid "%d KB\n" msgstr "%d Kb\n" #: install_steps_gtk.pm:299 #, c-format msgid "Importance: " msgstr "Muhimligi: " #: install_steps_gtk.pm:332 #, c-format msgid "You can not select/unselect this package" msgstr "Bu paketni tanlolmaysiz/tanlashni bekor qilolmaysiz" #: install_steps_gtk.pm:336 #, c-format msgid "due to missing %s" msgstr "%s etishmagani uchun" #: install_steps_gtk.pm:337 #, c-format msgid "due to unsatisfied %s" msgstr "" #: install_steps_gtk.pm:338 #, c-format msgid "trying to promote %s" msgstr "" #: install_steps_gtk.pm:339 #, c-format msgid "in order to keep %s" msgstr "%s'ni qoldirish uchun" #: install_steps_gtk.pm:344 #, c-format msgid "" "You can not select this package as there is not enough space left to install " "it" msgstr "" "Bu paketni tanlolmaysiz, chunki uni o'rnatish uchun etarli joy mavjud emas." #: install_steps_gtk.pm:347 #, c-format msgid "The following packages are going to be installed" msgstr "Quyidagi paketlar o'rnatiladi" #: install_steps_gtk.pm:348 #, c-format msgid "The following packages are going to be removed" msgstr "Quyidagi paketlar olib tashlaniladi." #: install_steps_gtk.pm:372 #, c-format msgid "This is a mandatory package, it can not be unselected" msgstr "" "Bu o'rnatilishi shart bo'lgan paket, uni tanlashni bekor qilib bo'lmaydi." #: install_steps_gtk.pm:374 #, c-format msgid "You can not unselect this package. It is already installed" msgstr "Bu paketni tanlashni bekor qilolmaysiz. U allaqachon o'rnatilgan." #: install_steps_gtk.pm:377 #, c-format msgid "" "This package must be upgraded.\n" "Are you sure you want to deselect it?" msgstr "" "Bu paket yangilanishi shart.\n" "Uni tanlashni bekor qilishga ishonchingiz komilmi?" #: install_steps_gtk.pm:380 #, c-format msgid "You can not unselect this package. It must be upgraded" msgstr "Bu paketni tanlashni bekor qilolmaysiz. U yangilanishi shart." #: install_steps_gtk.pm:385 #, c-format msgid "Show automatically selected packages" msgstr "Avtomatik ravishda tanlangan paketlarni ko'rsatish" #: install_steps_gtk.pm:390 #, fuzzy, c-format msgid "Load/Save selection" msgstr "Paketlarni tanlash" #: install_steps_gtk.pm:391 #, c-format msgid "Updating package selection" msgstr "Paketlar tanlovi yangilanmoqda" #: install_steps_gtk.pm:396 #, c-format msgid "Minimal install" msgstr "Minimal o'rnatish" #: install_steps_gtk.pm:410 install_steps_interactive.pm:483 #, c-format msgid "Choose the packages you want to install" msgstr "Siz o'rnatmoqchi bo'lgan paketlarni tanlang" #: install_steps_gtk.pm:426 install_steps_interactive.pm:710 #, c-format msgid "Installing" msgstr "O'rnatilmoqda" #: install_steps_gtk.pm:433 #, c-format msgid "Estimating" msgstr "Chamalanmoqda" #: install_steps_gtk.pm:482 #, c-format msgid "No details" msgstr "Tafsilotlarsiz" #: install_steps_gtk.pm:490 #, c-format msgid "Time remaining " msgstr "Qolgan vaqt " #: install_steps_gtk.pm:497 #, c-format msgid "Please wait, preparing installation..." msgstr "Iltimos kutib turing, o'rnatishga tayyorlanmoqda..." #: install_steps_gtk.pm:512 #, c-format msgid "%d packages" msgstr "%d paket" #: install_steps_gtk.pm:517 #, c-format msgid "Installing package %s" msgstr "%s paketi o'rnatilmoqda" #: install_steps_gtk.pm:552 install_steps_interactive.pm:91 #: install_steps_interactive.pm:735 #, c-format msgid "Refuse" msgstr "Rad etish" #: install_steps_gtk.pm:556 install_steps_interactive.pm:739 #, c-format msgid "" "Change your Cd-Rom!\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you do not have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" "Kompakt-diskni almashtiring!\n" "\n" "Iltimos '%s' belgili kompakt-diskni qo'ying va \"Ok\" tugmasini bosing.\n" "Agar u sizda bo'lmasa, bu kompakt-diskdan o'rnatishni bekor qilish uchun " "\"Bekor qilish\" tugmasini bosing." #: install_steps_gtk.pm:571 install_steps_interactive.pm:750 #, c-format msgid "There was an error ordering packages:" msgstr "Quyidagi paketlarni saralashda xato ro'y berdi:" #: install_steps_gtk.pm:571 install_steps_gtk.pm:575 #: install_steps_interactive.pm:750 install_steps_interactive.pm:754 #, c-format msgid "Go on anyway?" msgstr "Bunga qaramasdan davom etishni istaysizmi?" #: install_steps_gtk.pm:575 install_steps_interactive.pm:754 #, c-format msgid "There was an error installing packages:" msgstr "Quyidagi paketlarni o'rnatishda xato ro'y berdi:" #: install_steps_gtk.pm:617 install_steps_interactive.pm:926 #: install_steps_interactive.pm:1075 #, c-format msgid "not configured" msgstr "moslanmagan" #: install_steps_gtk.pm:680 #, c-format msgid "" "The following installation media have been found.\n" "If you want to skip some of them, you can unselect them now." msgstr "" #: install_steps_gtk.pm:689 #, c-format msgid "" "You have the option to copy the contents of the CDs onto the hard drive " "before installation.\n" "It will then continue from the hard drive and the packages will remain " "available once the system is fully installed." msgstr "" #: install_steps_gtk.pm:691 #, c-format msgid "Copy whole CDs" msgstr "" #: install_steps_interactive.pm:84 #, c-format msgid "License agreement" msgstr "Litsenziya kelishuvi" #: install_steps_interactive.pm:88 #, c-format msgid "Release Notes" msgstr "Yangi narsalar" #: install_steps_interactive.pm:118 #, c-format msgid "Please choose your keyboard layout." msgstr "Iltimos tugmalar tartibini tanlang." #: install_steps_interactive.pm:120 #, c-format msgid "Here is the full list of available keyboards" msgstr "Mavjud bo'lgan tugmataglarning to'liq ro'yxati" #: install_steps_interactive.pm:150 #, c-format msgid "Install/Upgrade" msgstr "O'rnatish/Yangilash" #: install_steps_interactive.pm:151 #, c-format msgid "Is this an install or an upgrade?" msgstr "Bu o'rnatishmi yoki yangilashmi?" #: install_steps_interactive.pm:157 #, c-format msgid "Upgrade %s" msgstr "%s'ni yangilash" #: install_steps_interactive.pm:168 #, c-format msgid "Encryption key for %s" msgstr "%s uchun kodlash kaliti" #: install_steps_interactive.pm:185 #, c-format msgid "Please choose your type of mouse." msgstr "Iltimos sichqonchaning turini tanlang." #: install_steps_interactive.pm:194 standalone/mousedrake:46 #, c-format msgid "Mouse Port" msgstr "Sichqonchaning porti" #: install_steps_interactive.pm:195 standalone/mousedrake:47 #, c-format msgid "Please choose which serial port your mouse is connected to." msgstr "Iltimos sichqoncha ulangan ketma-ket portini tanlang." #: install_steps_interactive.pm:205 #, c-format msgid "Buttons emulation" msgstr "" #: install_steps_interactive.pm:207 #, c-format msgid "Button 2 Emulation" msgstr "" #: install_steps_interactive.pm:208 #, c-format msgid "Button 3 Emulation" msgstr "" #: install_steps_interactive.pm:229 #, c-format msgid "PCMCIA" msgstr "PCMCIA" #: install_steps_interactive.pm:229 #, c-format msgid "Configuring PCMCIA cards..." msgstr "PCMCIA kartalar moslanmoqda..." #: install_steps_interactive.pm:236 #, c-format msgid "IDE" msgstr "IDE" #: install_steps_interactive.pm:236 #, c-format msgid "Configuring IDE" msgstr "IDE'ni moslash" #: install_steps_interactive.pm:256 #, c-format msgid "No partition available" msgstr "Diskning qismi yo'q." #: install_steps_interactive.pm:259 #, c-format msgid "Scanning partitions to find mount points" msgstr "Ulash nuqtalarini topish uchun diskning qismlari tekshirilmoqda" #: install_steps_interactive.pm:266 #, c-format msgid "Choose the mount points" msgstr "Ulash nuqtalarini tanlang" #: install_steps_interactive.pm:312 #, c-format msgid "" "No free space for 1MB bootstrap! Install will continue, but to boot your " "system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" #: install_steps_interactive.pm:317 #, c-format msgid "" "You'll need to create a PPC PReP Boot bootstrap! Install will continue, but " "to boot your system, you'll need to create the bootstrap partition in " "DiskDrake" msgstr "" #: install_steps_interactive.pm:353 #, c-format msgid "Choose the partitions you want to format" msgstr "Format qilish uchun diskning qismlarini tanlang" #: install_steps_interactive.pm:355 #, c-format msgid "Check bad blocks?" msgstr " Xato bloklarni tekshiraymi?" #: install_steps_interactive.pm:383 #, c-format msgid "" "Failed to check filesystem %s. Do you want to repair the errors? (beware, " "you can lose data)" msgstr "" "%s fayl tizimini tekshirish muvaffaqiyatsiz tugadi. Xatolarni tuzatishni " "istaysizmi? (esingizda tursin, siz ma'lumotni yo'qotishingiz mumkin)" #: install_steps_interactive.pm:386 #, c-format msgid "Not enough swap space to fulfill installation, please add some" msgstr "" #: install_steps_interactive.pm:393 #, c-format msgid "Looking for available packages and rebuilding rpm database..." msgstr "" "Mavjud bo'lgan paketlarni qidirish va rpm ma'lumot bazasini boshqadan " "yaratish bajarilmoqda..." #: install_steps_interactive.pm:394 install_steps_interactive.pm:452 #, c-format msgid "Looking for available packages..." msgstr "Mavjud bo'lgan paketlar qidirilmoqda..." #: install_steps_interactive.pm:397 #, c-format msgid "Looking at packages already installed..." msgstr "Allaqachon o'rnatilgan paketlar qidirilmoqda..." #: install_steps_interactive.pm:401 #, c-format msgid "Finding packages to upgrade..." msgstr "Yangilash uchun paketlar qidirilmoqda..." #: install_steps_interactive.pm:421 install_steps_interactive.pm:830 #, c-format msgid "Choose a mirror from which to get the packages" msgstr "Paketlarni olish uchun oynani tanlang" #: install_steps_interactive.pm:461 #, c-format msgid "" "Your system does not have enough space left for installation or upgrade (%d " "> %d)" msgstr "Tizimda o'rnatish yoki yangilash uchun etarli joy qolmadi (%d > %d)" #: install_steps_interactive.pm:495 #, c-format msgid "" "Please choose load or save package selection.\n" "The format is the same as auto_install generated files." msgstr "" #: install_steps_interactive.pm:497 #, fuzzy, c-format msgid "Load" msgstr "XLoad" #: install_steps_interactive.pm:497 standalone/drakbackup:3918 #: standalone/drakbackup:3991 standalone/drakroam:210 standalone/logdrake:172 #, c-format msgid "Save" msgstr "Saqlash" #: install_steps_interactive.pm:505 #, fuzzy, c-format msgid "Bad file" msgstr "Fayllarni yuklash" #: install_steps_interactive.pm:581 #, c-format msgid "Selected size is larger than available space" msgstr "Tanlangan hajm mavjud bo'lgan bo'sh joydan katta" #: install_steps_interactive.pm:596 #, c-format msgid "Type of install" msgstr "O'rnatishning turi" #: install_steps_interactive.pm:597 #, c-format msgid "" "You have not selected any group of packages.\n" "Please choose the minimal installation you want:" msgstr "" "Siz hech qanday paketlar guruhini tanlamadingiz.\n" "Iltimos siz istagan minimal o'rnatishni tanlang:" #: install_steps_interactive.pm:601 #, c-format msgid "With basic documentation (recommended!)" msgstr "Asosiy qo'llanmalar bilan (tavsiya qilinadi!)" #: install_steps_interactive.pm:602 #, c-format msgid "Truly minimal install (especially no urpmi)" msgstr "Haqiqiy minimal o'rnatish (xususan urpmi'siz)" #: install_steps_interactive.pm:641 standalone/drakxtv:52 #, c-format msgid "All" msgstr "Hammasi" #: install_steps_interactive.pm:680 #, c-format msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" "Agar sizda quyidagi ro'yxatda ko'rsatilgan kompakt-disklar bo'lsa, \"Ok\" " "tugmasini bosing.\n" "Agar ulardan hech qaysi bo'lmasa, \"Bekor qilish\" tugmasini bosing.\n" "Agar ulardan ba'zi biri bo'lmasa, ularni tanlashni bekor qiling va \"Ok\" " "tugmasini bosing." #: install_steps_interactive.pm:685 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "\"%s\" belgili kompakt-disk" #: install_steps_interactive.pm:710 #, c-format msgid "Preparing installation" msgstr "O'rnatishga tayyorlanmoqda" #: install_steps_interactive.pm:719 #, c-format msgid "" "Installing package %s\n" "%d%%" msgstr "" "%s paketi o'rnatilmoqda\n" "%d%%" #: install_steps_interactive.pm:768 #, c-format msgid "Post-install configuration" msgstr "O'rnatishdan keyin moslash" #: install_steps_interactive.pm:775 #, c-format msgid "Please ensure the Update Modules media is in drive %s" msgstr "" #: install_steps_interactive.pm:804 #, c-format msgid "" "You now have the opportunity to download updated packages. These packages\n" "have been updated after the distribution was released. They may\n" "contain security or bug fixes.\n" "\n" "To download these packages, you will need to have a working Internet \n" "connection.\n" "\n" "Do you want to install the updates?" msgstr "" #: install_steps_interactive.pm:825 #, fuzzy, c-format msgid "" "Contacting Mandriva Linux web site to get the list of available mirrors..." msgstr "" "Mavjud bo'lgan paketlarning ro'yxatini olish uchun oyna bilan aloqa " "o'rnatilmoqda..." #: install_steps_interactive.pm:844 #, c-format msgid "Contacting the mirror to get the list of available packages..." msgstr "" "Mavjud bo'lgan paketlarning ro'yxatini olish uchun oyna bilan aloqa " "o'rnatilmoqda..." #: install_steps_interactive.pm:848 #, c-format msgid "Unable to contact mirror %s" msgstr "Oyna (%s)bilan aloqa o'rnatib bo'lmadi." #: install_steps_interactive.pm:848 #, c-format msgid "Would you like to try again?" msgstr "Boshqadan urinib ko'rishni istaysizmi?" #: install_steps_interactive.pm:875 standalone/drakclock:45 #, c-format msgid "Which is your timezone?" msgstr "Vaqt zonangizni tanlang?" #: install_steps_interactive.pm:880 #, c-format msgid "Automatic time synchronization (using NTP)" msgstr "" #: install_steps_interactive.pm:888 #, c-format msgid "NTP Server" msgstr "NTP serveri" #: install_steps_interactive.pm:930 steps.pm:30 #, c-format msgid "Summary" msgstr "Hisobot" #: install_steps_interactive.pm:943 install_steps_interactive.pm:951 #: install_steps_interactive.pm:969 install_steps_interactive.pm:976 #: install_steps_interactive.pm:1127 services.pm:133 #: standalone/drakbackup:1573 #, c-format msgid "System" msgstr "Tizim" #: install_steps_interactive.pm:983 install_steps_interactive.pm:1010 #: install_steps_interactive.pm:1027 install_steps_interactive.pm:1043 #: install_steps_interactive.pm:1054 #, c-format msgid "Hardware" msgstr "Asbob-uskunalar" #: install_steps_interactive.pm:989 install_steps_interactive.pm:998 #, c-format msgid "Remote CUPS server" msgstr "Masofadagi CUPS serveri" #: install_steps_interactive.pm:989 #, c-format msgid "No printer" msgstr "Printer yo'q" #: install_steps_interactive.pm:1031 #, c-format msgid "Do you have an ISA sound card?" msgstr "Sizda ISA tovush kartasi bormi?" #: install_steps_interactive.pm:1033 #, c-format msgid "" "Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound " "card" msgstr "" "O'rnatishdan keyin, tovush kartangizni moslash uchun, \"sndconfig\" yoki " "\"alsaconf\" dasturini ishga tushiring" #: install_steps_interactive.pm:1035 #, c-format msgid "No sound card detected. Try \"harddrake\" after installation" msgstr "" "Tovush kartasi topilmadi. O'rnatishdan keyin \"harddrake\" dasturini sinab " "ko'ring." #: install_steps_interactive.pm:1055 #, c-format msgid "Graphical interface" msgstr "Grafik interfeys" #: install_steps_interactive.pm:1061 install_steps_interactive.pm:1073 #, c-format msgid "Network & Internet" msgstr "Tarmoq va Internet" #: install_steps_interactive.pm:1075 #, c-format msgid "configured" msgstr "moslangan" #: install_steps_interactive.pm:1084 install_steps_interactive.pm:1098 #: steps.pm:20 #, c-format msgid "Security" msgstr "Xavfsizlik" #: install_steps_interactive.pm:1103 #, c-format msgid "activated" msgstr "ishlayapti" #: install_steps_interactive.pm:1103 #, c-format msgid "disabled" msgstr "o'chirilgan" #: install_steps_interactive.pm:1114 #, c-format msgid "Boot" msgstr "Tizimni yuklanishi" #. -PO: example: lilo-graphic on /dev/hda1 #: install_steps_interactive.pm:1118 #, c-format msgid "%s on %s" msgstr "%s %s'da" #: install_steps_interactive.pm:1132 services.pm:175 #, c-format msgid "Services: %d activated for %d registered" msgstr "Xizmatlar: %d ishlamoqda %d qayd qilingan" #: install_steps_interactive.pm:1142 #, c-format msgid "You have not configured X. Are you sure you really want this?" msgstr "Siz X'ni moslamadingiz. Rostdan buni istaysizmi?" #: install_steps_interactive.pm:1223 #, c-format msgid "Preparing bootloader..." msgstr "OT yuklagichi tayyorlanmoqda..." #: install_steps_interactive.pm:1233 #, c-format msgid "" "You appear to have an OldWorld or Unknown machine, the yaboot bootloader " "will not work for you. The install will continue, but you'll need to use " "BootX or some other means to boot your machine. The kernel argument for the " "root fs is: root=%s" msgstr "" #: install_steps_interactive.pm:1239 #, c-format msgid "Do you want to use aboot?" msgstr "aboot dasturidan foydalanishni istaysizmi?" #: install_steps_interactive.pm:1242 #, c-format msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" #: install_steps_interactive.pm:1259 #, c-format msgid "" "In this security level, access to the files in the Windows partition is " "restricted to the administrator." msgstr "" #: install_steps_interactive.pm:1288 standalone/drakautoinst:76 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "Bo'sh disketni %s uskunasiga qo'ying" #: install_steps_interactive.pm:1293 #, c-format msgid "Please insert another floppy for drivers disk" msgstr "Iltimos drayverlar uchun boshqa disketni qo'ying" #: install_steps_interactive.pm:1295 #, c-format msgid "Creating auto install floppy..." msgstr "Avto-o'rnatish disketi yaratilmoqda..." #: install_steps_interactive.pm:1307 #, c-format msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" "Ba'zi o'rnatish bosqichlari bajarilmadi.\n" "\n" "Rostdan chiqishni istaysizmi?" #: install_steps_interactive.pm:1323 #, c-format msgid "Generate auto install floppy" msgstr "Avto-o'rnatish disketni yaratish" #: install_steps_interactive.pm:1325 #, c-format msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" "(this is meant for installing on another box).\n" "\n" "You may prefer to replay the installation.\n" msgstr "" #: install_steps_newt.pm:20 #, c-format msgid "Mandriva Linux Installation %s" msgstr "Mandriva Linux'ni o'rnatish %s" #. -PO: This string must fit in a 80-char wide text screen #: install_steps_newt.pm:34 #, c-format msgid "" " / between elements | selects | next screen " msgstr "" " / elementdan-elementga | tanlash | keyingi " "oyna " #: interactive.pm:192 #, c-format msgid "Choose a file" msgstr "Faylni tanlang" #: interactive.pm:317 interactive/gtk.pm:505 standalone/drakbackup:1514 #: standalone/drakfont:656 standalone/drakhosts:242 standalone/draknfs:619 #: standalone/drakroam:218 standalone/drakups:301 standalone/drakups:361 #: standalone/drakups:381 standalone/drakvpn:319 standalone/drakvpn:680 #, c-format msgid "Add" msgstr "Qo'shish" #: interactive.pm:317 interactive/gtk.pm:505 standalone/drakhosts:249 #: standalone/draknfs:626 #, c-format msgid "Modify" msgstr "O'zgartirish" #: interactive.pm:317 interactive/gtk.pm:505 standalone/drakhosts:256 #: standalone/draknfs:633 standalone/drakroam:202 standalone/drakups:303 #: standalone/drakups:363 standalone/drakups:383 standalone/drakvpn:319 #: standalone/drakvpn:680 #, c-format msgid "Remove" msgstr "Olib tashlash" #: interactive.pm:394 #, c-format msgid "Basic" msgstr "Asosiy" #: interactive.pm:432 interactive/newt.pm:321 ugtk2.pm:506 #, c-format msgid "Finish" msgstr "Tayyor" #: interactive/newt.pm:92 #, c-format msgid "Do" msgstr "Bajarish" #: interactive/stdio.pm:29 interactive/stdio.pm:148 #, c-format msgid "Bad choice, try again\n" msgstr "Noto'g'ri tanlov, boshqadan urinib ko'ring\n" #: interactive/stdio.pm:30 interactive/stdio.pm:149 #, c-format msgid "Your choice? (default %s) " msgstr "Siz nimani tanlaysiz? (andoza: %s) " #: interactive/stdio.pm:54 #, c-format msgid "" "Entries you'll have to fill:\n" "%s" msgstr "" "To'ldirish kerak bo'lgan maydonlar:\n" "%s" #: interactive/stdio.pm:70 #, c-format msgid "Your choice? (0/1, default `%s') " msgstr "Siz nimani tanlaysiz? (0/1, andoza: \"%s\")" #: interactive/stdio.pm:94 #, c-format msgid "Button `%s': %s" msgstr "Tugma \"%s\": %s" #: interactive/stdio.pm:95 #, c-format msgid "Do you want to click on this button?" msgstr "Bu tugmani bosishni istaysizmi?" #: interactive/stdio.pm:104 #, c-format msgid "Your choice? (default `%s'%s) " msgstr "Siz nimani tanlaysiz? (andoza: \"%s\"%s) " #: interactive/stdio.pm:104 #, c-format msgid " enter `void' for void entry" msgstr "" #: interactive/stdio.pm:122 #, c-format msgid "=> There are many things to choose from (%s).\n" msgstr "=> Tanlash uchun ko'p narsa bor (%s).\n" #: interactive/stdio.pm:125 #, c-format msgid "" "Please choose the first number of the 10-range you wish to edit,\n" "or just hit Enter to proceed.\n" "Your choice? " msgstr "" #: interactive/stdio.pm:138 #, c-format msgid "" "=> Notice, a label changed:\n" "%s" msgstr "" "=> E'tibor bering, belgi o'zgardi:\n" "%s" #: interactive/stdio.pm:145 #, c-format msgid "Re-submit" msgstr "Boshqadan jo'natish" #: keyboard.pm:171 keyboard.pm:205 #, c-format msgid "" "_: keyboard\n" "Czech (QWERTZ)" msgstr "Chexcha (qwertz)" #: keyboard.pm:172 keyboard.pm:207 #, c-format msgid "" "_: keyboard\n" "German" msgstr "Olmoncha" #: keyboard.pm:173 #, c-format msgid "" "_: keyboard\n" "Dvorak" msgstr "Dvorak" #: keyboard.pm:174 keyboard.pm:224 #, c-format msgid "" "_: keyboard\n" "Spanish" msgstr "Ispancha" #: keyboard.pm:175 keyboard.pm:225 #, c-format msgid "" "_: keyboard\n" "Finnish" msgstr "Fincha" #: keyboard.pm:176 keyboard.pm:228 #, c-format msgid "" "_: keyboard\n" "French" msgstr "Frantsuzcha" #: keyboard.pm:177 keyboard.pm:272 #, c-format msgid "" "_: keyboard\n" "Norwegian" msgstr "Norvegcha" #: keyboard.pm:178 #, c-format msgid "" "_: keyboard\n" "Polish" msgstr "Polyakcha" #: keyboard.pm:179 keyboard.pm:284 #, c-format msgid "" "_: keyboard\n" "Russian" msgstr "Ruscha" #: keyboard.pm:181 keyboard.pm:290 #, c-format msgid "" "_: keyboard\n" "Swedish" msgstr "Shvedcha" #: keyboard.pm:182 keyboard.pm:320 #, c-format msgid "UK keyboard" msgstr "Buyuk Britaniya" #: keyboard.pm:183 keyboard.pm:323 #, c-format msgid "US keyboard" msgstr "AQSh" #: keyboard.pm:185 #, c-format msgid "" "_: keyboard\n" "Albanian" msgstr "Albancha" #: keyboard.pm:186 #, c-format msgid "" "_: keyboard\n" "Armenian (old)" msgstr "Armancha (eski)" #: keyboard.pm:187 #, c-format msgid "" "_: keyboard\n" "Armenian (typewriter)" msgstr "Armancha (yozish moshinasi)" #: keyboard.pm:188 #, c-format msgid "" "_: keyboard\n" "Armenian (phonetic)" msgstr "Armancha (fonetik)" #: keyboard.pm:189 #, c-format msgid "" "_: keyboard\n" "Arabic" msgstr "Arabcha" #: keyboard.pm:190 #, c-format msgid "" "_: keyboard\n" "Azerbaidjani (latin)" msgstr "Ozarbayjoncha (lotin)" #: keyboard.pm:191 #, c-format msgid "" "_: keyboard\n" "Belgian" msgstr "Belgiacha" #: keyboard.pm:192 #, c-format msgid "" "_: keyboard\n" "Bengali (Inscript-layout)" msgstr "Bengalcha (Inscript)" #: keyboard.pm:193 #, c-format msgid "" "_: keyboard\n" "Bengali (Probhat)" msgstr "Bengalcha (Probhat)" #: keyboard.pm:194 #, c-format msgid "" "_: keyboard\n" "Bulgarian (phonetic)" msgstr "Bolgarcha (fonetik)" #: keyboard.pm:195 #, c-format msgid "" "_: keyboard\n" "Bulgarian (BDS)" msgstr "Bolgarcha (BDS)" #: keyboard.pm:196 #, c-format msgid "" "_: keyboard\n" "Brazilian (ABNT-2)" msgstr "Brazilcha (ABNT-2)" #: keyboard.pm:197 #, c-format msgid "" "_: keyboard\n" "Bosnian" msgstr "Bosniyacha" #: keyboard.pm:198 #, c-format msgid "" "_: keyboard\n" "Belarusian" msgstr "Beloruscha" #: keyboard.pm:200 #, c-format msgid "" "_: keyboard\n" "Swiss (German layout)" msgstr "Shveytsariya (Olmoncha)" #: keyboard.pm:202 #, c-format msgid "" "_: keyboard\n" "Swiss (French layout)" msgstr "Shveytsariya (Frantsuzcha)" #: keyboard.pm:204 #, fuzzy, c-format msgid "" "_: keyboard\n" "Cherokee syllabics" msgstr "Arabcha" #: keyboard.pm:206 #, c-format msgid "" "_: keyboard\n" "Czech (QWERTY)" msgstr "Chexcha (qwerty)" #: keyboard.pm:208 #, c-format msgid "" "_: keyboard\n" "German (no dead keys)" msgstr "Olmoncha (o'lik tugmalarsiz)" #: keyboard.pm:209 #, c-format msgid "" "_: keyboard\n" "Devanagari" msgstr "Devanagari" #: keyboard.pm:210 #, c-format msgid "" "_: keyboard\n" "Danish" msgstr "Daniya" #: keyboard.pm:211 #, c-format msgid "" "_: keyboard\n" "Dvorak (US)" msgstr "Dvorak (AQSh)" #: keyboard.pm:213 #, c-format msgid "" "_: keyboard\n" "Dvorak (Esperanto)" msgstr "Dvorak (Esperanto)" #: keyboard.pm:215 #, fuzzy, c-format msgid "" "_: keyboard\n" "Dvorak (French)" msgstr "Dvorak (Norvegcha)" #: keyboard.pm:217 #, fuzzy, c-format msgid "" "_: keyboard\n" "Dvorak (UK)" msgstr "Dvorak (AQSh)" #: keyboard.pm:218 #, c-format msgid "" "_: keyboard\n" "Dvorak (Norwegian)" msgstr "Dvorak (Norvegcha)" #: keyboard.pm:220 #, fuzzy, c-format msgid "" "_: keyboard\n" "Dvorak (Polish)" msgstr "Dvorak (Shvedcha)" #: keyboard.pm:221 #, c-format msgid "" "_: keyboard\n" "Dvorak (Swedish)" msgstr "Dvorak (Shvedcha)" #: keyboard.pm:222 #, fuzzy, c-format msgid "" "_: keyboard\n" "Dzongkha/Tibetan" msgstr "Bosniyacha" #: keyboard.pm:223 #, c-format msgid "" "_: keyboard\n" "Estonian" msgstr "Estoncha" #: keyboard.pm:227 #, fuzzy, c-format msgid "" "_: keyboard\n" "Faroese" msgstr "Grekcha" #: keyboard.pm:229 #, c-format msgid "" "_: keyboard\n" "Georgian (\"Russian\" layout)" msgstr "Gruzincha (rus)" #: keyboard.pm:230 #, c-format msgid "" "_: keyboard\n" "Georgian (\"Latin\" layout)" msgstr "Gruzincha (lotin)" #: keyboard.pm:231 #, c-format msgid "" "_: keyboard\n" "Greek" msgstr "Grekcha" #: keyboard.pm:232 #, c-format msgid "" "_: keyboard\n" "Greek (polytonic)" msgstr "Grekcha (politonik)" #: keyboard.pm:233 #, c-format msgid "" "_: keyboard\n" "Gujarati" msgstr "Gujarati" #: keyboard.pm:234 #, c-format msgid "" "_: keyboard\n" "Gurmukhi" msgstr "Gurmuxi" #: keyboard.pm:235 #, c-format msgid "" "_: keyboard\n" "Croatian" msgstr "Xorvatcha" #: keyboard.pm:236 #, c-format msgid "" "_: keyboard\n" "Hungarian" msgstr "Vengrcha" #: keyboard.pm:237 #, c-format msgid "" "_: keyboard\n" "Irish" msgstr "Irlandcha" #: keyboard.pm:238 #, c-format msgid "" "_: keyboard\n" "Israeli" msgstr "Isroilcha" #: keyboard.pm:239 #, c-format msgid "" "_: keyboard\n" "Israeli (phonetic)" msgstr "Isroilcha (fonetik)" #: keyboard.pm:240 #, c-format msgid "" "_: keyboard\n" "Iranian" msgstr "Eroncha" #: keyboard.pm:241 #, c-format msgid "" "_: keyboard\n" "Icelandic" msgstr "Islandcha" #: keyboard.pm:242 #, c-format msgid "" "_: keyboard\n" "Italian" msgstr "Italyancha" #: keyboard.pm:243 #, c-format msgid "" "_: keyboard\n" "Inuktitut" msgstr "Inuktitut" #: keyboard.pm:248 #, c-format msgid "" "_: keyboard\n" "Japanese 106 keys" msgstr "Yaponcha 106 tugma" #: keyboard.pm:249 #, c-format msgid "" "_: keyboard\n" "Kannada" msgstr "Kannada" #: keyboard.pm:252 #, c-format msgid "" "_: keyboard\n" "Korean" msgstr "Koreyscha" #: keyboard.pm:254 #, fuzzy, c-format msgid "" "_: keyboard\n" "Kurdish (arabic script)" msgstr "Arabcha" #: keyboard.pm:255 #, c-format msgid "" "_: keyboard\n" "Kyrgyz" msgstr "Qirg'izcha" #: keyboard.pm:256 #, c-format msgid "" "_: keyboard\n" "Latin American" msgstr "Lotin Amerikacha" #: keyboard.pm:258 #, c-format msgid "" "_: keyboard\n" "Laotian" msgstr "Laoscha" #: keyboard.pm:259 #, c-format msgid "" "_: keyboard\n" "Lithuanian AZERTY (old)" msgstr "Litvacha AZERTY (eski)" #: keyboard.pm:261 #, c-format msgid "" "_: keyboard\n" "Lithuanian AZERTY (new)" msgstr "Litvacha AZERTY (yangi)" #: keyboard.pm:262 #, c-format msgid "" "_: keyboard\n" "Lithuanian \"number row\" QWERTY" msgstr "Litvacha \"raqamli qator\" (qwerty)" #: keyboard.pm:263 #, c-format msgid "" "_: keyboard\n" "Lithuanian \"phonetic\" QWERTY" msgstr "Litvacha \"fonetik\" (qwerty)" #: keyboard.pm:264 #, c-format msgid "" "_: keyboard\n" "Latvian" msgstr "Latviacha" #: keyboard.pm:265 #, c-format msgid "" "_: keyboard\n" "Malayalam" msgstr "Malayalam" #: keyboard.pm:266 #, c-format msgid "" "_: keyboard\n" "Macedonian" msgstr "Makedoncha" #: keyboard.pm:267 #, c-format msgid "" "_: keyboard\n" "Myanmar (Burmese)" msgstr "Myanmar (Birma)" #: keyboard.pm:268 #, c-format msgid "" "_: keyboard\n" "Mongolian (cyrillic)" msgstr "Mug'ulcha (kiril)" #: keyboard.pm:269 #, c-format msgid "" "_: keyboard\n" "Maltese (UK)" msgstr "Malta (Buyuk Britaniya)" #: keyboard.pm:270 #, c-format msgid "" "_: keyboard\n" "Maltese (US)" msgstr "Malta (AQSh)" #: keyboard.pm:271 #, c-format msgid "" "_: keyboard\n" "Dutch" msgstr "Gollandcha" #: keyboard.pm:273 #, c-format msgid "" "_: keyboard\n" "Oriya" msgstr "Oriya" #: keyboard.pm:274 #, c-format msgid "" "_: keyboard\n" "Polish (qwerty layout)" msgstr "Polyakcha (qwerty)" #: keyboard.pm:275 #, c-format msgid "" "_: keyboard\n" "Polish (qwertz layout)" msgstr "Polyakcha (qwertz)" #: keyboard.pm:277 #, fuzzy, c-format msgid "" "_: keyboard\n" "Pashto" msgstr "Polyakcha" #: keyboard.pm:278 #, c-format msgid "" "_: keyboard\n" "Portuguese" msgstr "Portugalcha" #: keyboard.pm:280 #, c-format msgid "" "_: keyboard\n" "Canadian (Quebec)" msgstr "Kanadcha (Kvebek)" #: keyboard.pm:282 #, c-format msgid "" "_: keyboard\n" "Romanian (qwertz)" msgstr "Rumincha (qwertz)" #: keyboard.pm:283 #, c-format msgid "" "_: keyboard\n" "Romanian (qwerty)" msgstr "Rumincha (qwerty)" #: keyboard.pm:285 #, c-format msgid "" "_: keyboard\n" "Russian (phonetic)" msgstr "Ruscha (fonetik)" #: keyboard.pm:286 #, c-format msgid "" "_: keyboard\n" "Saami (norwegian)" msgstr "Saami (Norvegcha)" #: keyboard.pm:287 #, c-format msgid "" "_: keyboard\n" "Saami (swedish/finnish)" msgstr "Saami (Shvedcha/Fincha)" #: keyboard.pm:289 #, fuzzy, c-format msgid "" "_: keyboard\n" "Sindhi" msgstr "Taycha" #: keyboard.pm:291 #, c-format msgid "" "_: keyboard\n" "Slovenian" msgstr "Slovencha" #: keyboard.pm:293 #, c-format msgid "" "_: keyboard\n" "Sinhala" msgstr "" #: keyboard.pm:294 #, c-format msgid "" "_: keyboard\n" "Slovakian (QWERTZ)" msgstr "Slovakcha (qwertz)" #: keyboard.pm:295 #, c-format msgid "" "_: keyboard\n" "Slovakian (QWERTY)" msgstr "Slovakcha (qwerty)" #: keyboard.pm:297 #, c-format msgid "" "_: keyboard\n" "Serbian (cyrillic)" msgstr "Serbcha (kirilcha)" #: keyboard.pm:298 #, c-format msgid "" "_: keyboard\n" "Syriac" msgstr "Suriyacha" #: keyboard.pm:299 #, c-format msgid "" "_: keyboard\n" "Syriac (phonetic)" msgstr "Eski Suriyacha (fonetik)" #: keyboard.pm:300 #, c-format msgid "" "_: keyboard\n" "Telugu" msgstr "Telegu" #: keyboard.pm:302 #, c-format msgid "" "_: keyboard\n" "Tamil (ISCII-layout)" msgstr "Tamilcha (ISCII)" #: keyboard.pm:303 #, c-format msgid "" "_: keyboard\n" "Tamil (Typewriter-layout)" msgstr "Tamilcha (yozish moshinasi)" #: keyboard.pm:304 #, c-format msgid "" "_: keyboard\n" "Thai (Kedmanee)" msgstr "Taycha (Kedmanee)" #: keyboard.pm:305 #, c-format msgid "" "_: keyboard\n" "Thai (TIS-820)" msgstr "Taycha (TIS-820)" #: keyboard.pm:307 #, c-format msgid "" "_: keyboard\n" "Thai (Pattachote)" msgstr "Taycha (Pattachote)" #: keyboard.pm:310 #, c-format msgid "" "_: keyboard\n" "Tifinagh (moroccan layout) (+latin/arabic)" msgstr "" #: keyboard.pm:311 #, c-format msgid "" "_: keyboard\n" "Tifinagh (phonetic) (+latin/arabic)" msgstr "" #: keyboard.pm:313 #, c-format msgid "" "_: keyboard\n" "Tajik" msgstr "Tojikcha" #: keyboard.pm:315 #, fuzzy, c-format msgid "" "_: keyboard\n" "Turkmen" msgstr "Olmoncha" #: keyboard.pm:316 #, c-format msgid "" "_: keyboard\n" "Turkish (traditional \"F\" model)" msgstr "Turkcha (an'anaviy \"F\" modeli)" #: keyboard.pm:317 #, c-format msgid "" "_: keyboard\n" "Turkish (modern \"Q\" model)" msgstr "Turkcha (zamonaviy \"Q\" modeli)" #: keyboard.pm:319 #, c-format msgid "" "_: keyboard\n" "Ukrainian" msgstr "Ukraincha" #: keyboard.pm:322 #, fuzzy, c-format msgid "" "_: keyboard\n" "Urdu keyboard" msgstr "Oriya" #: keyboard.pm:324 #, c-format msgid "US keyboard (international)" msgstr "AQSh (xalqaro)" #: keyboard.pm:325 #, c-format msgid "" "_: keyboard\n" "Uzbek (cyrillic)" msgstr "O'zbekcha (kiril)" #: keyboard.pm:327 #, c-format msgid "" "_: keyboard\n" "Vietnamese \"numeric row\" QWERTY" msgstr "Vetnamcha \"raqamli qator\" (qwerty)" #: keyboard.pm:328 #, c-format msgid "" "_: keyboard\n" "Yugoslavian (latin)" msgstr "Yugoslavcha (lotin)" #: keyboard.pm:335 #, c-format msgid "Right Alt key" msgstr "O'ng Alt tugmasi" #: keyboard.pm:336 #, c-format msgid "Both Shift keys simultaneously" msgstr "Bir vaqtda ikkala Shift tugmalari" #: keyboard.pm:337 #, c-format msgid "Control and Shift keys simultaneously" msgstr "Bir vaqtda Ctrl va Shift tugmalari" #: keyboard.pm:338 #, c-format msgid "CapsLock key" msgstr "CapsLock tugmasi" #: keyboard.pm:339 #, c-format msgid "Shift and CapsLock keys simultaneously" msgstr "Bir vaqtda Shift va CapsLock tugmalari" #: keyboard.pm:340 #, c-format msgid "Ctrl and Alt keys simultaneously" msgstr "Bir vaqtda Ctrl va Alt tugmalari" #: keyboard.pm:341 #, c-format msgid "Alt and Shift keys simultaneously" msgstr "Bir vaqtda Alt va Shift tugmalari" #: keyboard.pm:342 #, c-format msgid "\"Menu\" key" msgstr "\"Menyu\" tugmasi" #: keyboard.pm:343 #, c-format msgid "Left \"Windows\" key" msgstr "Chap \"Windows\" tugmasi" #: keyboard.pm:344 #, c-format msgid "Right \"Windows\" key" msgstr "O'ng \"Windows\" tugmasi" #: keyboard.pm:345 #, c-format msgid "Both Control keys simultaneously" msgstr "Bir vaqtda ikkala Ctrl tugmalari" #: keyboard.pm:346 #, c-format msgid "Both Alt keys simultaneously" msgstr "Bir vaqtda ikkala Alt tugmalari" #: keyboard.pm:347 #, c-format msgid "Left Shift key" msgstr "Chap Shift tugmasi" #: keyboard.pm:348 #, c-format msgid "Right Shift key" msgstr "O'ng Shift tugmasi" #: keyboard.pm:349 #, c-format msgid "Left Alt key" msgstr "Chap Alt tugmasi" #: keyboard.pm:350 #, c-format msgid "Left Control key" msgstr "Chap Ctrl tugmasi" #: keyboard.pm:351 #, c-format msgid "Right Control key" msgstr "O'ng Ctrl tugmasi" #: keyboard.pm:387 #, c-format msgid "" "Here you can choose the key or key combination that will \n" "allow switching between the different keyboard layouts\n" "(eg: latin and non latin)" msgstr "" "Bu erda, turli tugmalar tartibini tanlash imkoniyatini\n" "yaratuvchi tugma yoki tugmalar birikmasini tanlashingiz\n" "mumkin. (m-n: lotin va lotin emas)" #: keyboard.pm:392 #, c-format msgid "" "This setting will be activated after the installation.\n" "During installation, you will need to use the Right Control\n" "key to switch between the different keyboard layouts." msgstr "" "Bu moslama o'rnatishdan keyin ishga tushadi.\n" "O'rnatish vaqtida turli tugmalar tartibini tanlash uchun\n" "o'ng \"Ctrl\" turmasini ishlating." #. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR" #. -PO: or as "default:RTL", depending if your language is written from #. -PO: left to right, or from right to left; any other string is wrong. #: lang.pm:178 #, c-format msgid "default:LTR" msgstr "default:LTR" #: lang.pm:195 #, c-format msgid "Andorra" msgstr "Andorra" #: lang.pm:196 network/adsl_consts.pm:943 #, c-format msgid "United Arab Emirates" msgstr "Birlashgan Arab Amirliklari" #: lang.pm:197 #, c-format msgid "Afghanistan" msgstr "Afg'oniston" #: lang.pm:198 #, c-format msgid "Antigua and Barbuda" msgstr "Antigua va Barbuda" #: lang.pm:199 #, c-format msgid "Anguilla" msgstr "Angvilla" #: lang.pm:200 #, c-format msgid "Albania" msgstr "Albaniya" #: lang.pm:201 #, c-format msgid "Armenia" msgstr "Armaniston" #: lang.pm:202 #, c-format msgid "Netherlands Antilles" msgstr "Niderlandlar Antil Orollari" #: lang.pm:203 #, c-format msgid "Angola" msgstr "Angola" #: lang.pm:204 #, c-format msgid "Antarctica" msgstr "Antarktika" #: lang.pm:205 network/adsl_consts.pm:55 standalone/drakxtv:50 #, c-format msgid "Argentina" msgstr "Argentina" #: lang.pm:206 #, c-format msgid "American Samoa" msgstr "Amerika Samoasi" #: lang.pm:209 #, c-format msgid "Aruba" msgstr "Aruba" #: lang.pm:210 #, c-format msgid "Azerbaijan" msgstr "Ozarbayjon" #: lang.pm:211 #, c-format msgid "Bosnia and Herzegovina" msgstr "Bosniya va Gertsogovina" #: lang.pm:212 #, c-format msgid "Barbados" msgstr "Barbados" #: lang.pm:213 #, c-format msgid "Bangladesh" msgstr "Bangladesh" #: lang.pm:215 #, c-format msgid "Burkina Faso" msgstr "Burkina-Fasso" #: lang.pm:216 network/adsl_consts.pm:170 network/adsl_consts.pm:179 #, c-format msgid "Bulgaria" msgstr "Bolgariya" #: lang.pm:217 #, c-format msgid "Bahrain" msgstr "Bahrayn" #: lang.pm:218 #, c-format msgid "Burundi" msgstr "Burundi" #: lang.pm:219 #, c-format msgid "Benin" msgstr "Benin" #: lang.pm:220 #, c-format msgid "Bermuda" msgstr "Bermuda Orollari" #: lang.pm:221 #, c-format msgid "Brunei Darussalam" msgstr "Bruney Dorussalom" #: lang.pm:222 #, c-format msgid "Bolivia" msgstr "Boliviya" #: lang.pm:224 #, c-format msgid "Bahamas" msgstr "Bagama Orollari" #: lang.pm:225 #, c-format msgid "Bhutan" msgstr "Butan" #: lang.pm:226 #, c-format msgid "Bouvet Island" msgstr "Buve Oroli" #: lang.pm:227 #, c-format msgid "Botswana" msgstr "Botsvana" #: lang.pm:228 #, c-format msgid "Belarus" msgstr "Belorus" #: lang.pm:229 #, c-format msgid "Belize" msgstr "Beliz" #: lang.pm:231 #, c-format msgid "Cocos (Keeling) Islands" msgstr "Kokos (Kiling) Orollari" #: lang.pm:232 #, c-format msgid "Congo (Kinshasa)" msgstr "Kongo (Kinshasa)" #: lang.pm:233 #, c-format msgid "Central African Republic" msgstr "Markaziy Afrika Respublikasi" #: lang.pm:234 #, c-format msgid "Congo (Brazzaville)" msgstr "Kongo (Brazzavil)" #: lang.pm:236 #, c-format msgid "Cote d'Ivoire" msgstr "Kot d'Ivuar" #: lang.pm:237 #, c-format msgid "Cook Islands" msgstr "Kuk Orollari" #: lang.pm:238 #, c-format msgid "Chile" msgstr "Chili" #: lang.pm:239 #, c-format msgid "Cameroon" msgstr "Kamerun" #: lang.pm:240 network/adsl_consts.pm:188 network/adsl_consts.pm:197 #: network/adsl_consts.pm:206 network/adsl_consts.pm:215 #: network/adsl_consts.pm:224 network/adsl_consts.pm:233 #: network/adsl_consts.pm:242 network/adsl_consts.pm:251 #: network/adsl_consts.pm:260 network/adsl_consts.pm:269 #: network/adsl_consts.pm:278 network/adsl_consts.pm:287 #: network/adsl_consts.pm:296 network/adsl_consts.pm:305 #: network/adsl_consts.pm:314 network/adsl_consts.pm:323 #: network/adsl_consts.pm:332 network/adsl_consts.pm:341 #: network/adsl_consts.pm:350 network/adsl_consts.pm:359 #, c-format msgid "China" msgstr "Xitoy" #: lang.pm:241 #, c-format msgid "Colombia" msgstr "Kolumbiya" #: lang.pm:243 #, c-format msgid "Serbia & Montenegro" msgstr "Serbiya va Montenegro" #: lang.pm:244 #, c-format msgid "Cuba" msgstr "Kuba" #: lang.pm:245 #, c-format msgid "Cape Verde" msgstr "Keyp Verde" #: lang.pm:246 #, c-format msgid "Christmas Island" msgstr "Krismas Oroli" #: lang.pm:247 #, c-format msgid "Cyprus" msgstr "Kipr" #: lang.pm:250 #, c-format msgid "Djibouti" msgstr "Jibuti" #: lang.pm:252 #, c-format msgid "Dominica" msgstr "Dominika" #: lang.pm:253 #, c-format msgid "Dominican Republic" msgstr "Dominikana Respublikasi" #: lang.pm:254 network/adsl_consts.pm:44 #, c-format msgid "Algeria" msgstr "Jazoir" #: lang.pm:255 #, c-format msgid "Ecuador" msgstr "Ekvador" #: lang.pm:257 #, c-format msgid "Egypt" msgstr "Misr" #: lang.pm:258 #, c-format msgid "Western Sahara" msgstr "G'arbiy Saxara" #: lang.pm:259 #, c-format msgid "Eritrea" msgstr "Eritriya" #: lang.pm:261 #, c-format msgid "Ethiopia" msgstr "Efiopiya" #: lang.pm:263 #, c-format msgid "Fiji" msgstr "Fiji" #: lang.pm:264 #, c-format msgid "Falkland Islands (Malvinas)" msgstr "Folklend (Malvin) Orollari" #: lang.pm:265 #, c-format msgid "Micronesia" msgstr "Mikroneziya" #: lang.pm:266 #, c-format msgid "Faroe Islands" msgstr "Farer Orollari" #: lang.pm:268 #, c-format msgid "Gabon" msgstr "Gabon" #: lang.pm:269 network/adsl_consts.pm:954 network/adsl_consts.pm:965 #: network/netconnect.pm:46 #, c-format msgid "United Kingdom" msgstr "Buyuk Britaniya" #: lang.pm:270 #, c-format msgid "Grenada" msgstr "Grenada" #: lang.pm:271 #, c-format msgid "Georgia" msgstr "Gurjiston" #: lang.pm:272 #, c-format msgid "French Guiana" msgstr "Frantsuz Gvineya" #: lang.pm:273 #, c-format msgid "Ghana" msgstr "Gana" #: lang.pm:274 #, c-format msgid "Gibraltar" msgstr "Gibraltar" #: lang.pm:275 #, c-format msgid "Greenland" msgstr "Grenlandiya" #: lang.pm:276 #, c-format msgid "Gambia" msgstr "Gambiya" #: lang.pm:277 #, c-format msgid "Guinea" msgstr "Gvineya" #: lang.pm:278 #, c-format msgid "Guadeloupe" msgstr "Gvadelupa" #: lang.pm:279 #, c-format msgid "Equatorial Guinea" msgstr "Ekvatorial Gvineya" #: lang.pm:281 #, c-format msgid "South Georgia and the South Sandwich Islands" msgstr "Janubiy Jorjiya va Janubiy Sendvich Orollari" #: lang.pm:282 #, c-format msgid "Guatemala" msgstr "Gvatemala" #: lang.pm:283 #, c-format msgid "Guam" msgstr "Guam" #: lang.pm:284 #, c-format msgid "Guinea-Bissau" msgstr "Gvineya-Bissau" #: lang.pm:285 #, c-format msgid "Guyana" msgstr "Gviana" #: lang.pm:286 #, c-format msgid "Hong Kong SAR (China)" msgstr "Xitoy (Gonkong)" #: lang.pm:287 #, c-format msgid "Heard and McDonald Islands" msgstr "Xerd va MakDonald Orollari" #: lang.pm:288 #, c-format msgid "Honduras" msgstr "Gonduras" #: lang.pm:289 #, c-format msgid "Croatia" msgstr "Xorvatiya" #: lang.pm:290 #, c-format msgid "Haiti" msgstr "Gaiti" #: lang.pm:292 #, c-format msgid "Indonesia" msgstr "Indoneziya" #: lang.pm:295 #, c-format msgid "India" msgstr "Hindiston" #: lang.pm:296 #, c-format msgid "British Indian Ocean Territory" msgstr "Hind Okeanning Britaniya Erlari" #: lang.pm:297 #, c-format msgid "Iraq" msgstr "Iroq" #: lang.pm:298 #, c-format msgid "Iran" msgstr "Eron" #: lang.pm:299 #, c-format msgid "Iceland" msgstr "Islandiya" #: lang.pm:301 #, c-format msgid "Jamaica" msgstr "Yamayka" #: lang.pm:302 #, c-format msgid "Jordan" msgstr "Iordan" #: lang.pm:304 #, c-format msgid "Kenya" msgstr "Keniya" #: lang.pm:305 #, c-format msgid "Kyrgyzstan" msgstr "Qirg'iziston" #: lang.pm:306 #, c-format msgid "Cambodia" msgstr "Kambodja" #: lang.pm:307 #, c-format msgid "Kiribati" msgstr "Kiribati" #: lang.pm:308 #, c-format msgid "Comoros" msgstr "Komoros" #: lang.pm:309 #, c-format msgid "Saint Kitts and Nevis" msgstr "Sent-Kristofer va Nevis" #: lang.pm:310 #, c-format msgid "Korea (North)" msgstr "Shimoliy Koreya" #: lang.pm:311 #, c-format msgid "Korea" msgstr "Koreya" #: lang.pm:312 #, c-format msgid "Kuwait" msgstr "Kuvayt" #: lang.pm:313 #, c-format msgid "Cayman Islands" msgstr "Kayman Orollari" #: lang.pm:314 #, c-format msgid "Kazakhstan" msgstr "Qozog'iston" #: lang.pm:315 #, c-format msgid "Laos" msgstr "Laos" #: lang.pm:316 #, c-format msgid "Lebanon" msgstr "Lebanon" #: lang.pm:317 #, c-format msgid "Saint Lucia" msgstr "Sent-Lyusiya" #: lang.pm:318 #, c-format msgid "Liechtenstein" msgstr "Lixtenshteyn" #: lang.pm:319 #, c-format msgid "Sri Lanka" msgstr "Shri Lanka" #: lang.pm:320 #, c-format msgid "Liberia" msgstr "Liberiya" #: lang.pm:321 #, c-format msgid "Lesotho" msgstr "Lesoto" #: lang.pm:322 network/adsl_consts.pm:600 #, c-format msgid "Lithuania" msgstr "Litva" #: lang.pm:323 #, c-format msgid "Luxembourg" msgstr "Lyuksemburg" #: lang.pm:324 #, c-format msgid "Latvia" msgstr "Latviya" #: lang.pm:325 #, c-format msgid "Libya" msgstr "Libiya" #: lang.pm:326 network/adsl_consts.pm:609 #, c-format msgid "Morocco" msgstr "Marokash" #: lang.pm:327 #, c-format msgid "Monaco" msgstr "Monako" #: lang.pm:328 #, c-format msgid "Moldova" msgstr "Moldova" #: lang.pm:329 #, c-format msgid "Madagascar" msgstr "Madagaskar" #: lang.pm:330 #, c-format msgid "Marshall Islands" msgstr "Marshall Orollari" #: lang.pm:331 #, c-format msgid "Macedonia" msgstr "Makedoniya" #: lang.pm:332 #, c-format msgid "Mali" msgstr "Mali" #: lang.pm:333 #, c-format msgid "Myanmar" msgstr "Myanmar" #: lang.pm:334 #, c-format msgid "Mongolia" msgstr "Mug'iliston" #: lang.pm:335 #, c-format msgid "Northern Mariana Islands" msgstr "Shimoliy Mariana Orollari" #: lang.pm:336 #, c-format msgid "Martinique" msgstr "Martinika" #: lang.pm:337 #, c-format msgid "Mauritania" msgstr "Mavritaniya" #: lang.pm:338 #, c-format msgid "Montserrat" msgstr "Montserrat" #: lang.pm:339 #, c-format msgid "Malta" msgstr "Malta" #: lang.pm:340 #, c-format msgid "Mauritius" msgstr "Mavrikiy" #: lang.pm:341 #, c-format msgid "Maldives" msgstr "Maldiv Orollari" #: lang.pm:342 #, c-format msgid "Malawi" msgstr "Malavi" #: lang.pm:343 #, c-format msgid "Mexico" msgstr "Meksika" #: lang.pm:344 #, c-format msgid "Malaysia" msgstr "Malayziya" #: lang.pm:345 #, c-format msgid "Mozambique" msgstr "Mozambik" #: lang.pm:346 #, c-format msgid "Namibia" msgstr "Namibiya" #: lang.pm:347 #, c-format msgid "New Caledonia" msgstr "Yangi Kaledoniya" #: lang.pm:348 #, c-format msgid "Niger" msgstr "Niger" #: lang.pm:349 #, c-format msgid "Norfolk Island" msgstr "Norfolk Oroli" #: lang.pm:350 #, c-format msgid "Nigeria" msgstr "Nigeriya" #: lang.pm:351 #, c-format msgid "Nicaragua" msgstr "Nikaragua" #: lang.pm:354 #, c-format msgid "Nepal" msgstr "Nepal" #: lang.pm:355 #, c-format msgid "Nauru" msgstr "Nauru" #: lang.pm:356 #, c-format msgid "Niue" msgstr "Niue" #: lang.pm:358 #, c-format msgid "Oman" msgstr "Ummon" #: lang.pm:359 #, c-format msgid "Panama" msgstr "Panama" #: lang.pm:360 #, c-format msgid "Peru" msgstr "Peru" #: lang.pm:361 #, c-format msgid "French Polynesia" msgstr "Frantsuz Polineziya" #: lang.pm:362 #, c-format msgid "Papua New Guinea" msgstr "Papua Yangi Gvineya" #: lang.pm:363 #, c-format msgid "Philippines" msgstr "Filippin" #: lang.pm:364 #, c-format msgid "Pakistan" msgstr "Pokiston" #: lang.pm:366 #, c-format msgid "Saint Pierre and Miquelon" msgstr "Sent-Per va Mikelon" #: lang.pm:367 #, c-format msgid "Pitcairn" msgstr "Pitkern" #: lang.pm:368 #, c-format msgid "Puerto Rico" msgstr "Puerto-Riko" #: lang.pm:369 #, c-format msgid "Palestine" msgstr "Falastin" #: lang.pm:371 #, c-format msgid "Paraguay" msgstr "Paragvay" #: lang.pm:372 #, c-format msgid "Palau" msgstr "Palau" #: lang.pm:373 #, c-format msgid "Qatar" msgstr "Qatar" #: lang.pm:374 #, c-format msgid "Reunion" msgstr "Reyunion" #: lang.pm:375 #, c-format msgid "Romania" msgstr "Ruminiya" #: lang.pm:377 #, c-format msgid "Rwanda" msgstr "Rvanda" #: lang.pm:378 #, c-format msgid "Saudi Arabia" msgstr "Saudiya Arabistoni" #: lang.pm:379 #, c-format msgid "Solomon Islands" msgstr "Solomon Orollari" #: lang.pm:380 #, c-format msgid "Seychelles" msgstr "Seyshel Orollari" #: lang.pm:381 #, c-format msgid "Sudan" msgstr "Sudan" #: lang.pm:383 #, c-format msgid "Singapore" msgstr "Singapur" #: lang.pm:384 #, c-format msgid "Saint Helena" msgstr "Avliyo Elena Oroli" #: lang.pm:385 network/adsl_consts.pm:747 #, c-format msgid "Slovenia" msgstr "Sloveniya" #: lang.pm:386 #, c-format msgid "Svalbard and Jan Mayen Islands" msgstr "Svalbard va Yan Mayen Orollari" #: lang.pm:388 #, c-format msgid "Sierra Leone" msgstr "Serra-Leone" #: lang.pm:389 #, c-format msgid "San Marino" msgstr "San-Marino" #: lang.pm:390 network/adsl_consts.pm:737 #, c-format msgid "Senegal" msgstr "Senegal" #: lang.pm:391 #, c-format msgid "Somalia" msgstr "Somali" #: lang.pm:392 #, c-format msgid "Suriname" msgstr "Surinam" #: lang.pm:393 #, c-format msgid "Sao Tome and Principe" msgstr "San-Tome va Prinsipi" #: lang.pm:394 #, c-format msgid "El Salvador" msgstr "Salvador" #: lang.pm:395 #, c-format msgid "Syria" msgstr "Suriya" #: lang.pm:396 #, c-format msgid "Swaziland" msgstr "Svazilend" #: lang.pm:397 #, c-format msgid "Turks and Caicos Islands" msgstr "Turks va Kaikos Orollari" #: lang.pm:398 #, c-format msgid "Chad" msgstr "Chad" #: lang.pm:399 #, c-format msgid "French Southern Territories" msgstr "Frantsiyaning Janubiy Erlari" #: lang.pm:400 #, c-format msgid "Togo" msgstr "Togo" #: lang.pm:402 #, c-format msgid "Tajikistan" msgstr "Tojikiston" #: lang.pm:403 #, c-format msgid "Tokelau" msgstr "Tokelau" #: lang.pm:404 #, c-format msgid "East Timor" msgstr "Sharqiy Timur" #: lang.pm:405 #, c-format msgid "Turkmenistan" msgstr "Turkmaniston" #: lang.pm:406 network/adsl_consts.pm:931 #, c-format msgid "Tunisia" msgstr "Tunis" #: lang.pm:407 #, c-format msgid "Tonga" msgstr "Tonga" #: lang.pm:408 #, c-format msgid "Turkey" msgstr "Turkiya" #: lang.pm:409 #, c-format msgid "Trinidad and Tobago" msgstr "Trinidad va Tobago" #: lang.pm:410 #, c-format msgid "Tuvalu" msgstr "Tuvalu" #: lang.pm:412 #, c-format msgid "Tanzania" msgstr "Tanzaniya" #: lang.pm:413 #, c-format msgid "Ukraine" msgstr "Ukraina" #: lang.pm:414 #, c-format msgid "Uganda" msgstr "Uganda" #: lang.pm:415 #, c-format msgid "United States Minor Outlying Islands" msgstr "Kichik Uzoqlashgan Orollar Qo'shma Shtatlari" #: lang.pm:417 #, c-format msgid "Uruguay" msgstr "Urugvay" #: lang.pm:418 #, c-format msgid "Uzbekistan" msgstr "O'zbekiston" #: lang.pm:419 #, c-format msgid "Vatican" msgstr "Vatikan" #: lang.pm:420 #, c-format msgid "Saint Vincent and the Grenadines" msgstr "Sent-Vinsent va Grenadina" #: lang.pm:421 #, c-format msgid "Venezuela" msgstr "Venesuela" #: lang.pm:422 #, c-format msgid "Virgin Islands (British)" msgstr "Virginiya Orollari (Angliya)" #: lang.pm:423 #, c-format msgid "Virgin Islands (U.S.)" msgstr "Virginiya Orollari (AQSh)" #: lang.pm:424 #, c-format msgid "Vietnam" msgstr "Vetnam" #: lang.pm:425 #, c-format msgid "Vanuatu" msgstr "Vanuatu" #: lang.pm:426 #, c-format msgid "Wallis and Futuna" msgstr "Uollis va Futuna Orollari" #: lang.pm:427 #, c-format msgid "Samoa" msgstr "Samoa" #: lang.pm:428 #, c-format msgid "Yemen" msgstr "Yaman" #: lang.pm:429 #, c-format msgid "Mayotte" msgstr "Mayot" #: lang.pm:431 #, c-format msgid "Zambia" msgstr "Zambiya" #: lang.pm:432 #, c-format msgid "Zimbabwe" msgstr "Zimbabve" #: lang.pm:1079 #, c-format msgid "You should install the following packages: %s" msgstr "Quyidagi paketlarni o'rnatish kerak: %s" #. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit" #: lang.pm:1082 standalone/scannerdrake:135 #, c-format msgid ", " msgstr ", " #: lang.pm:1135 #, c-format msgid "Welcome to %s" msgstr "%s'ga marhamat" #: lvm.pm:83 #, c-format msgid "Moving used physical extents to other physical volumes failed" msgstr "" #: lvm.pm:135 #, c-format msgid "Physical volume %s is still in use" msgstr "" #: lvm.pm:145 #, c-format msgid "Remove the logical volumes first\n" msgstr "" #: lvm.pm:178 #, c-format msgid "The bootloader can't handle /boot on multiple physicals volumes" msgstr "" #: modules/interactive.pm:21 standalone/drakconnect:1028 #, c-format msgid "Parameters" msgstr "Parametrlar" #: modules/interactive.pm:21 standalone/draksec:51 #, c-format msgid "NONE" msgstr "YO'Q" #: modules/interactive.pm:22 #, c-format msgid "Module configuration" msgstr "Modulni moslash" #: modules/interactive.pm:22 #, c-format msgid "You can configure each parameter of the module here." msgstr "Modulning hamma parametrlarini shu erda moslashingiz mumkin." #: modules/interactive.pm:63 #, c-format msgid "Found %s interfaces" msgstr "%s interfeyslar topildi" #: modules/interactive.pm:64 #, c-format msgid "Do you have another one?" msgstr "Sizda yana boshqasi bormi?" #: modules/interactive.pm:65 #, c-format msgid "Do you have any %s interfaces?" msgstr "Sizda %s interfeysi bormi?" #: modules/interactive.pm:71 #, c-format msgid "See hardware info" msgstr "Asbob-uskuna haqida ma'lumotga qarang" #: modules/interactive.pm:82 #, fuzzy, c-format msgid "Installing driver for USB controller" msgstr "%s kartasi (%s) uchun drayver o'rnatilmoqda" #: modules/interactive.pm:83 #, fuzzy, c-format msgid "Installing driver for firewire controller %s" msgstr "%s kartasi (%s) uchun drayver o'rnatilmoqda" #: modules/interactive.pm:84 #, fuzzy, c-format msgid "Installing driver for hard drive controller %s" msgstr "%s kartasi (%s) uchun drayver o'rnatilmoqda" #: modules/interactive.pm:85 #, fuzzy, c-format msgid "Installing driver for ethernet controller %s" msgstr "%s kartasi (%s) uchun drayver o'rnatilmoqda" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: modules/interactive.pm:96 #, c-format msgid "Installing driver for %s card %s" msgstr "%s kartasi (%s) uchun drayver o'rnatilmoqda" #: modules/interactive.pm:99 #, c-format msgid "(module %s)" msgstr "(modul %s)" #: modules/interactive.pm:109 #, c-format msgid "" "You may now provide options to module %s.\n" "Note that any address should be entered with the prefix 0x like '0x123'" msgstr "" #: modules/interactive.pm:115 #, c-format msgid "" "You may now provide options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "Endi %s moduliga parametrlarni kiritishingiz mumkin.\n" "Parametrlar \"nomi=qiymati nomi2=qiymati2\" ko'rinishda.\n" "Masalan, \"io=0x300 irq=7\"" #: modules/interactive.pm:117 #, c-format msgid "Module options:" msgstr "Modulning parametrlari:" #. -PO: the %s is the driver type (scsi, network, sound,...) #: modules/interactive.pm:130 #, c-format msgid "Which %s driver should I try?" msgstr "Qaysi %s drayverni sinab ko'ray?" #: modules/interactive.pm:139 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without them. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" #: modules/interactive.pm:143 #, c-format msgid "Autoprobe" msgstr "Avto-aniqlash" #: modules/interactive.pm:143 #, c-format msgid "Specify options" msgstr "Parametrlarni aniqlash" #: modules/interactive.pm:155 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "%s modulini yuklash muvaffaqiyat siz tugadi.\n" "Boshqa parametrlar bilan yana urinib ko'rishni istaysizmi?" #: modules/parameters.pm:49 #, c-format msgid "a number" msgstr "son" #: modules/parameters.pm:51 #, c-format msgid "%d comma separated numbers" msgstr "%d vergul bilan ajratilgan sonlar" #: modules/parameters.pm:51 #, c-format msgid "%d comma separated strings" msgstr "%d vergul bilan ajratilgan qatorlar" #: modules/parameters.pm:53 #, c-format msgid "comma separated numbers" msgstr "vergul bilan ajratilgan sonlar" #: modules/parameters.pm:53 #, c-format msgid "comma separated strings" msgstr "vergul bilan ajratilgan qatorlar" #: mouse.pm:25 #, c-format msgid "Sun - Mouse" msgstr "Sun - sichqoncha" #: mouse.pm:31 security/level.pm:12 #, c-format msgid "Standard" msgstr "Andoza" #: mouse.pm:32 #, c-format msgid "Logitech MouseMan+" msgstr "Logitech MouseMan+" #: mouse.pm:33 #, c-format msgid "Generic PS2 Wheel Mouse" msgstr "G'ildirakli andoza PS2 sichqoncha" #: mouse.pm:34 #, c-format msgid "GlidePoint" msgstr "GlidePoint" #: mouse.pm:36 network/modem.pm:47 network/modem.pm:48 network/modem.pm:49 #: network/modem.pm:73 network/modem.pm:87 network/modem.pm:92 #: network/modem.pm:125 network/netconnect.pm:585 network/netconnect.pm:590 #: network/netconnect.pm:602 network/netconnect.pm:607 #: network/netconnect.pm:623 network/netconnect.pm:625 #, c-format msgid "Automatic" msgstr "Avtomatik" #: mouse.pm:39 mouse.pm:73 #, c-format msgid "Kensington Thinking Mouse" msgstr "Kensington Thinking Mouse" #: mouse.pm:40 mouse.pm:68 #, c-format msgid "Genius NetMouse" msgstr "Genius NetMouse" #: mouse.pm:41 #, c-format msgid "Genius NetScroll" msgstr "Genius NetScroll" #: mouse.pm:42 mouse.pm:52 #, c-format msgid "Microsoft Explorer" msgstr "Microsoft Explorer" #: mouse.pm:47 mouse.pm:79 #, c-format msgid "1 button" msgstr "1 tugmali" #: mouse.pm:48 mouse.pm:57 #, c-format msgid "Generic 2 Button Mouse" msgstr "2 tugmali andoza sichqoncha" #: mouse.pm:50 mouse.pm:59 #, c-format msgid "Generic 3 Button Mouse with Wheel emulation" msgstr "" #: mouse.pm:51 #, c-format msgid "Wheel" msgstr "G'ildirakli" #: mouse.pm:55 #, c-format msgid "serial" msgstr "Ketma-ket" #: mouse.pm:58 #, c-format msgid "Generic 3 Button Mouse" msgstr "3 tugmali andoza sichqoncha" #: mouse.pm:60 #, c-format msgid "Microsoft IntelliMouse" msgstr "Microsoft IntelliMouse" #: mouse.pm:61 #, c-format msgid "Logitech MouseMan" msgstr "Logitech MouseMan" #: mouse.pm:62 #, c-format msgid "Logitech MouseMan with Wheel emulation" msgstr "" #: mouse.pm:63 #, c-format msgid "Mouse Systems" msgstr "Mouse Systems" #: mouse.pm:65 #, c-format msgid "Logitech CC Series" msgstr "" #: mouse.pm:66 #, c-format msgid "Logitech CC Series with Wheel emulation" msgstr "" #: mouse.pm:67 #, c-format msgid "Logitech MouseMan+/FirstMouse+" msgstr "Logitech MouseMan+/FirstMouse+" #: mouse.pm:69 #, c-format msgid "MM Series" msgstr "" #: mouse.pm:70 #, c-format msgid "MM HitTablet" msgstr "MM HitTablet" #: mouse.pm:71 #, c-format msgid "Logitech Mouse (serial, old C7 type)" msgstr "Logitech sichqoncha (ketma-ket, eski C7 turi)" #: mouse.pm:72 #, c-format msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation" msgstr "" #: mouse.pm:74 #, c-format msgid "Kensington Thinking Mouse with Wheel emulation" msgstr "" #: mouse.pm:77 #, c-format msgid "busmouse" msgstr "" #: mouse.pm:80 #, c-format msgid "2 buttons" msgstr "2 tugmali" #: mouse.pm:81 #, c-format msgid "3 buttons" msgstr "3 tugmali" #: mouse.pm:82 #, c-format msgid "3 buttons with Wheel emulation" msgstr "" #: mouse.pm:86 #, c-format msgid "Universal" msgstr "Universal" #: mouse.pm:88 #, c-format msgid "Any PS/2 & USB mice" msgstr "Istagan PS/2 va USB sichqoncha" #: mouse.pm:89 #, fuzzy, c-format msgid "Microsoft Xbox Controller S" msgstr "Microsoft Explorer" #: mouse.pm:93 standalone/drakconnect:351 standalone/drakvpn:1126 #, c-format msgid "none" msgstr "yo'q" #: mouse.pm:95 #, c-format msgid "No mouse" msgstr "Sichqoncha yo'q" #: mouse.pm:304 mouse.pm:367 mouse.pm:376 mouse.pm:435 #, c-format msgid "Synaptics Touchpad" msgstr "" #: mouse.pm:561 #, c-format msgid "Please test the mouse" msgstr "Iltimos sichqonchani sinab ko'ring" #: mouse.pm:563 #, c-format msgid "To activate the mouse," msgstr "Sichqonchani ishga tushirish uchun," #: mouse.pm:564 #, c-format msgid "MOVE YOUR WHEEL!" msgstr "G'ILDIRAKNI AYLANTIRING!" #: network/drakfirewall.pm:12 share/compssUsers.pl:85 #, c-format msgid "Web Server" msgstr "Veb serveri" #: network/drakfirewall.pm:17 #, c-format msgid "Domain Name Server" msgstr "DNS serveri" #: network/drakfirewall.pm:22 #, c-format msgid "SSH server" msgstr "SSH serveri" #: network/drakfirewall.pm:27 #, c-format msgid "FTP server" msgstr "FTP serveri" #: network/drakfirewall.pm:32 #, c-format msgid "Mail Server" msgstr "Xat-xabar serveri" #: network/drakfirewall.pm:37 #, c-format msgid "POP and IMAP Server" msgstr "POP va IMAP serverlari" #: network/drakfirewall.pm:42 #, c-format msgid "Telnet server" msgstr "Telnet serveri" #: network/drakfirewall.pm:48 #, c-format msgid "Windows Files Sharing (SMB)" msgstr "" #: network/drakfirewall.pm:54 #, c-format msgid "CUPS server" msgstr "CUPS serveri" #: network/drakfirewall.pm:60 #, c-format msgid "Echo request (ping)" msgstr "" #: network/drakfirewall.pm:65 #, c-format msgid "BitTorrent" msgstr "BitTorrent" #: network/drakfirewall.pm:158 #, c-format msgid "" "drakfirewall configurator\n" "\n" "This configures a personal firewall for this Mandriva Linux machine.\n" "For a powerful and dedicated firewall solution, please look to the\n" "specialized Mandriva Security Firewall distribution." msgstr "" #: network/drakfirewall.pm:164 #, c-format msgid "" "drakfirewall configurator\n" "\n" "Make sure you have configured your Network/Internet access with\n" "drakconnect before going any further." msgstr "" "drakfirewall moslagich\n" "\n" "Davom etishdan oldin tarmoqni/Internetni drakconnect\n" "bilan moslaganingizga ishonch hosil qiling." #: network/drakfirewall.pm:181 #, c-format msgid "Which services would you like to allow the Internet to connect to?" msgstr "Internetdan qaysi xizmatlarga ulanishga ruxsat berasiz?" #: network/drakfirewall.pm:182 #, c-format msgid "" "You can enter miscellaneous ports. \n" "Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n" "Have a look at /etc/services for information." msgstr "" "Har xil portlarni kiritishingiz mumkin.\n" "Masalan: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n" "Ma'lumot uchun /etc/services fayliga qarang." #: network/drakfirewall.pm:188 #, c-format msgid "" "Invalid port given: %s.\n" "The proper format is \"port/tcp\" or \"port/udp\", \n" "where port is between 1 and 65535.\n" "\n" "You can also give a range of ports (eg: 24300:24350/udp)" msgstr "" "Noto'g'ri port kiritilgan: %s\n" "Portning to'g'ri formati \"port/tcp\" yoki \"port/udp\",\n" "bu erda port 1-65535 oralig'idagi raqam.\n" "\n" "Portlarning chegarasini (m-n: 24300:24350/udp) ham kiritish mumkin" #: network/drakfirewall.pm:198 #, c-format msgid "Everything (no firewall)" msgstr "Hammasi (fayervol yo'q)" #: network/drakfirewall.pm:200 #, c-format msgid "Other ports" msgstr "Boshqa portlar" #: network/isdn.pm:118 network/netconnect.pm:459 network/netconnect.pm:546 #: network/netconnect.pm:549 network/netconnect.pm:692 #: network/netconnect.pm:696 #, c-format msgid "Unlisted - edit manually" msgstr "" #: network/isdn.pm:161 network/netconnect.pm:391 #, c-format msgid "ISA / PCMCIA" msgstr "ISA / PCMCIA" #: network/isdn.pm:161 network/netconnect.pm:391 #, c-format msgid "I do not know" msgstr "Men bilmayman" #: network/isdn.pm:162 network/netconnect.pm:391 #, c-format msgid "PCI" msgstr "PCI" #: network/isdn.pm:163 network/netconnect.pm:391 #, c-format msgid "USB" msgstr "USB" #: network/modem.pm:47 network/modem.pm:48 network/modem.pm:49 #: network/netconnect.pm:590 network/netconnect.pm:607 #: network/netconnect.pm:623 #, c-format msgid "Manual" msgstr "Qo'lbola" #: network/ndiswrapper.pm:27 #, c-format msgid "No device supporting the %s ndiswrapper driver is present!" msgstr "" #: network/ndiswrapper.pm:33 #, c-format msgid "Please select the Windows driver (.inf file)" msgstr "" #: network/ndiswrapper.pm:42 #, c-format msgid "Unable to install the %s ndiswrapper driver!" msgstr "" #: network/ndiswrapper.pm:89 #, c-format msgid "Unable to load the ndiswrapper module!" msgstr "" #: network/ndiswrapper.pm:95 #, c-format msgid "" "The selected device has already been configured with the %s driver.\n" "Do you really want to use a ndiswrapper driver?" msgstr "" #: network/ndiswrapper.pm:101 #, c-format msgid "Unable to find the ndiswrapper interface!" msgstr "" #: network/netconnect.pm:69 network/netconnect.pm:489 #: network/netconnect.pm:496 #, c-format msgid "Manual choice" msgstr "Qo'lbola tanlash" #: network/netconnect.pm:69 #, c-format msgid "Internal ISDN card" msgstr "Ichki ISDN karta" #: network/netconnect.pm:80 printer/printerdrake.pm:1418 standalone/drakups:75 #, c-format msgid "Manual configuration" msgstr "Qo'lbola moslash" #: network/netconnect.pm:81 #, c-format msgid "Automatic IP (BOOTP/DHCP)" msgstr "Avtomatik IP (BOOTP/DHCP)" #: network/netconnect.pm:83 #, c-format msgid "Automatic IP (BOOTP/DHCP/Zeroconf)" msgstr "Avtomatik IP (BOOTP/DHCP/Zeroconf)" #: network/netconnect.pm:86 #, c-format msgid "Protocol for the rest of the world" msgstr "" #: network/netconnect.pm:88 standalone/drakconnect:563 #, c-format msgid "European protocol (EDSS1)" msgstr "Oyropa protokoli (EDSS1)" #: network/netconnect.pm:89 standalone/drakconnect:564 #, c-format msgid "" "Protocol for the rest of the world\n" "No D-Channel (leased lines)" msgstr "" #: network/netconnect.pm:121 network/thirdparty.pm:185 #, c-format msgid "Alcatel speedtouch USB modem" msgstr "Alcatel speedtouch USB modemi" #: network/netconnect.pm:122 #, c-format msgid "Sagem USB modem" msgstr "Sagem USB modemi" #: network/netconnect.pm:123 #, c-format msgid "Bewan modem" msgstr "Bewan modemi" #: network/netconnect.pm:124 #, c-format msgid "ECI Hi-Focus modem" msgstr "ECI Hi-Focus modemi" #: network/netconnect.pm:128 #, c-format msgid "Dynamic Host Configuration Protocol (DHCP)" msgstr "" #: network/netconnect.pm:129 #, c-format msgid "Manual TCP/IP configuration" msgstr "TCP/IP moslamarini qo'lbola moslash" #: network/netconnect.pm:130 #, c-format msgid "Point to Point Tunneling Protocol (PPTP)" msgstr "" #: network/netconnect.pm:131 #, c-format msgid "PPP over Ethernet (PPPoE)" msgstr "" #: network/netconnect.pm:132 #, c-format msgid "PPP over ATM (PPPoA)" msgstr "" #: network/netconnect.pm:133 #, c-format msgid "DSL over CAPI" msgstr "" #: network/netconnect.pm:137 #, c-format msgid "Bridged Ethernet LLC" msgstr "" #: network/netconnect.pm:138 #, c-format msgid "Bridged Ethernet VC" msgstr "" #: network/netconnect.pm:139 #, c-format msgid "Routed IP LLC" msgstr "" #: network/netconnect.pm:140 #, c-format msgid "Routed IP VC" msgstr "" #: network/netconnect.pm:141 #, c-format msgid "PPPoA LLC" msgstr "PPPoA LLC" #: network/netconnect.pm:142 #, c-format msgid "PPPoA VC" msgstr "PPPoA VC" #: network/netconnect.pm:146 standalone/drakconnect:498 #, c-format msgid "Script-based" msgstr "Skriptda asoslangan" #: network/netconnect.pm:147 standalone/drakconnect:498 #, c-format msgid "PAP" msgstr "PAP" #: network/netconnect.pm:148 standalone/drakconnect:498 #, c-format msgid "Terminal-based" msgstr "Terminalda asoslangan" #: network/netconnect.pm:149 standalone/drakconnect:498 #, c-format msgid "CHAP" msgstr "CHAP" #: network/netconnect.pm:150 standalone/drakconnect:498 #, c-format msgid "PAP/CHAP" msgstr "PAP/CHAP" #: network/netconnect.pm:155 #, c-format msgid "Open WEP" msgstr "" #: network/netconnect.pm:156 #, c-format msgid "Restricted WEP" msgstr "" #: network/netconnect.pm:157 #, c-format msgid "WPA Pre-Shared Key" msgstr "" #: network/netconnect.pm:247 standalone/drakconnect:56 #, c-format msgid "Network & Internet Configuration" msgstr "Tarmoq va Internetni moslash" #: network/netconnect.pm:253 #, c-format msgid "LAN connection" msgstr "LAN orqali ulanish" #: network/netconnect.pm:254 network/netconnect.pm:273 #, c-format msgid "Wireless connection" msgstr "Simsiz ulanish" #: network/netconnect.pm:255 #, c-format msgid "ADSL connection" msgstr "ADSL orqali ulanish" #: network/netconnect.pm:256 #, c-format msgid "Cable connection" msgstr "Kabel orqali ulanish" #: network/netconnect.pm:257 #, c-format msgid "ISDN connection" msgstr "ISDN orqali ulanish" #: network/netconnect.pm:258 #, c-format msgid "Modem connection" msgstr "Vin-modem orqali ulanish" #: network/netconnect.pm:259 #, c-format msgid "DVB connection" msgstr "" #: network/netconnect.pm:269 #, c-format msgid "Choose the connection you want to configure" msgstr "Siz moslamoqchi bo'lgan ulanishni tanlang" #: network/netconnect.pm:284 network/netconnect.pm:771 #, c-format msgid "Connection Configuration" msgstr "Aloqani moslash" #: network/netconnect.pm:284 network/netconnect.pm:772 #, c-format msgid "Please fill or check the field below" msgstr "" #: network/netconnect.pm:287 #, c-format msgid "Your personal phone number" msgstr "Shaxsiy telefon raqamingiz" #: network/netconnect.pm:288 network/netconnect.pm:775 #, c-format msgid "Provider name (ex provider.net)" msgstr "Provayderning nomi (m-n provider.net)" #: network/netconnect.pm:289 standalone/drakconnect:493 #, c-format msgid "Provider phone number" msgstr "Provayderning telefon raqami" #: network/netconnect.pm:290 #, c-format msgid "Provider DNS 1 (optional)" msgstr "Provayderning DNS 1 (tanlasa bo'ladi)" #: network/netconnect.pm:291 #, c-format msgid "Provider DNS 2 (optional)" msgstr "Provayderning DNS 2 (tanlasa bo'ladi)" #: network/netconnect.pm:292 standalone/drakconnect:444 #, c-format msgid "Dialing mode" msgstr "" #: network/netconnect.pm:293 standalone/drakconnect:449 #: standalone/drakconnect:517 #, c-format msgid "Connection speed" msgstr "Aloqaning tezligi" #: network/netconnect.pm:294 standalone/drakconnect:454 #, c-format msgid "Connection timeout (in sec)" msgstr "Aloqa taymauti (soniyada)" #: network/netconnect.pm:295 network/netconnect.pm:320 #: network/netconnect.pm:778 standalone/drakconnect:491 #, c-format msgid "Account Login (user name)" msgstr "Foydalanuvchi" #: network/netconnect.pm:296 network/netconnect.pm:321 #: network/netconnect.pm:779 standalone/drakconnect:492 #, c-format msgid "Account Password" msgstr "Maxfiy so'z" #: network/netconnect.pm:297 standalone/drakconnect:554 #, c-format msgid "Card IRQ" msgstr "Kartaning IRQ'si" #: network/netconnect.pm:298 standalone/drakconnect:555 #, c-format msgid "Card mem (DMA)" msgstr "Kartaning xotirasi (DMA)" #: network/netconnect.pm:299 standalone/drakconnect:556 #, c-format msgid "Card IO" msgstr "Kartaning IO'si" #: network/netconnect.pm:300 standalone/drakconnect:557 #, c-format msgid "Card IO_0" msgstr "Kartaning IO_0'si" #: network/netconnect.pm:301 #, c-format msgid "Card IO_1" msgstr "Kartaning IO_1'si" #: network/netconnect.pm:316 #, fuzzy, c-format msgid "Cable: account options" msgstr "Hisob muddati o'tishini yoqish" #: network/netconnect.pm:319 #, c-format msgid "Use BPALogin (needed for Telstra)" msgstr "" #: network/netconnect.pm:344 network/netconnect.pm:659 #: network/netconnect.pm:810 network/netconnect.pm:1110 #, c-format msgid "Select the network interface to configure:" msgstr "Moslash uchun tarmoq interfeysini tanlang:" #: network/netconnect.pm:346 network/netconnect.pm:381 #: network/netconnect.pm:660 network/netconnect.pm:812 network/shorewall.pm:69 #: standalone/drakconnect:709 #, c-format msgid "Net Device" msgstr "Tarmoq uskunasi" #: network/netconnect.pm:347 network/netconnect.pm:352 #, c-format msgid "External ISDN modem" msgstr "Tashqi ISDN modem" #: network/netconnect.pm:380 standalone/harddrake2:216 #, c-format msgid "Select a device!" msgstr "Uskunani tanlang!" #: network/netconnect.pm:389 network/netconnect.pm:399 #: network/netconnect.pm:409 network/netconnect.pm:442 #: network/netconnect.pm:456 #, c-format msgid "ISDN Configuration" msgstr "ISDN'ni moslash" #: network/netconnect.pm:390 #, c-format msgid "What kind of card do you have?" msgstr "Sizda qanday karta bor?" #: network/netconnect.pm:400 #, c-format msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your " "card.\n" msgstr "" "\n" "Agar sizda ISA kartasi bo'lsa, keyingi oynadagi qiymatlar to'g'ri bo'lishi " "kerak.\n" "\n" "Agar sizda PCMCIA kartasi bo'lsa, kartangizning \"irq\" va \"io\" " "qiymatlarini bilishingiz kerak.\n" #: network/netconnect.pm:404 #, c-format msgid "Continue" msgstr "Davom etish" #: network/netconnect.pm:404 #, c-format msgid "Abort" msgstr "To'xtatish" #: network/netconnect.pm:410 #, c-format msgid "Which of the following is your ISDN card?" msgstr "Quyidagilarning qayi biri sizning ISDN kartangiz?" #: network/netconnect.pm:428 #, c-format msgid "" "A CAPI driver is available for this modem. This CAPI driver can offer more " "capabilities than the free driver (like sending faxes). Which driver do you " "want to use?" msgstr "" #: network/netconnect.pm:430 standalone/drakconnect:109 standalone/drakups:251 #: standalone/harddrake2:133 #, c-format msgid "Driver" msgstr "Drayver" #: network/netconnect.pm:442 #, c-format msgid "Which protocol do you want to use?" msgstr "Qaysi protokoldan foydalanmoqchisiz?" #: network/netconnect.pm:444 standalone/drakconnect:109 #: standalone/drakconnect:300 standalone/drakconnect:562 #: standalone/drakvpn:1128 #, c-format msgid "Protocol" msgstr "Protokol" #: network/netconnect.pm:456 #, c-format msgid "" "Select your provider.\n" "If it is not listed, choose Unlisted." msgstr "" "Provayderingizni tanlang.\n" "Agar ro'yxatda yo'q bo'lsa, \"Ro'yxatda yo'q\"ni tanlang." #: network/netconnect.pm:458 network/netconnect.pm:545 #: network/netconnect.pm:691 #, c-format msgid "Provider:" msgstr "Provayder:" #: network/netconnect.pm:467 #, c-format msgid "" "Your modem is not supported by the system.\n" "Take a look at http://www.linmodems.org" msgstr "" "Modemingizni bu tizimda ishlatib bo'lmaydi.\n" "http://www.linmodem.org veb-saytiga qarang." #: network/netconnect.pm:486 #, c-format msgid "Select the modem to configure:" msgstr "Moslash uchun modemni tanlang:" #: network/netconnect.pm:514 #, c-format msgid "Please choose which serial port your modem is connected to." msgstr "Iltimos, modem ulangan ketma-ket portini tanlang." #: network/netconnect.pm:543 #, c-format msgid "Select your provider:" msgstr "Provayderingizni tanlang:" #: network/netconnect.pm:567 #, c-format msgid "Dialup: account options" msgstr "" #: network/netconnect.pm:570 #, c-format msgid "Connection name" msgstr "Ulanishning nomi" #: network/netconnect.pm:571 #, c-format msgid "Phone number" msgstr "Telefon raqami" #: network/netconnect.pm:572 #, c-format msgid "Login ID" msgstr "Foydalanuvchi" #: network/netconnect.pm:587 network/netconnect.pm:620 #, c-format msgid "Dialup: IP parameters" msgstr "" #: network/netconnect.pm:590 #, c-format msgid "IP parameters" msgstr "IP parametrlari" #: network/netconnect.pm:591 network/netconnect.pm:899 #: printer/printerdrake.pm:460 standalone/drakconnect:109 #: standalone/drakconnect:316 standalone/drakconnect:878 #: standalone/drakhosts:194 standalone/drakups:286 #, c-format msgid "IP address" msgstr "IP raqami" #: network/netconnect.pm:592 #, c-format msgid "Subnet mask" msgstr "" #: network/netconnect.pm:604 #, c-format msgid "Dialup: DNS parameters" msgstr "" #: network/netconnect.pm:607 #, c-format msgid "DNS" msgstr "DNS" #: network/netconnect.pm:608 #, c-format msgid "Domain name" msgstr "Domenning nomi" #: network/netconnect.pm:609 network/netconnect.pm:776 #: standalone/drakconnect:993 #, c-format msgid "First DNS Server (optional)" msgstr "Birinchi DNS serveri (tanlab bo'ladi)" #: network/netconnect.pm:610 network/netconnect.pm:777 #: standalone/drakconnect:994 #, c-format msgid "Second DNS Server (optional)" msgstr "Ikkinchi DNS serveri (tanlab bo'ladi)" #: network/netconnect.pm:611 #, c-format msgid "Set hostname from IP" msgstr "" #: network/netconnect.pm:623 standalone/drakconnect:327 #, c-format msgid "Gateway" msgstr "Geytvey" #: network/netconnect.pm:624 #, c-format msgid "Gateway IP address" msgstr "Geytveyning IP raqami" #: network/netconnect.pm:659 #, c-format msgid "ADSL configuration" msgstr "ADSL moslamasi" #: network/netconnect.pm:689 #, c-format msgid "Please choose your ADSL provider" msgstr "Iltimos ADSL provayderingizni tanlang" #: network/netconnect.pm:719 #, c-format msgid "Connect to the Internet" msgstr "Internetga ulanish" #: network/netconnect.pm:720 #, c-format msgid "" "The most common way to connect with adsl is pppoe.\n" "Some connections use PPTP, a few use DHCP.\n" "If you do not know, choose 'use PPPoE'" msgstr "" #: network/netconnect.pm:724 #, c-format msgid "ADSL connection type:" msgstr "ADSL ulanishning turi:" #: network/netconnect.pm:781 #, c-format msgid "Virtual Path ID (VPI):" msgstr "" #: network/netconnect.pm:782 #, c-format msgid "Virtual Circuit ID (VCI):" msgstr "" #: network/netconnect.pm:785 #, c-format msgid "Encapsulation:" msgstr "" #: network/netconnect.pm:812 #, c-format msgid "Manually load a driver" msgstr "Drayverni qo'lbola yuklash" #: network/netconnect.pm:812 #, c-format msgid "Use a Windows driver (with ndiswrapper)" msgstr "" #: network/netconnect.pm:819 network/netconnect.pm:1074 #: network/netconnect.pm:1078 printer/printerdrake.pm:3741 #: standalone/drakgw:217 standalone/drakgw:258 standalone/drakgw:292 #: standalone/drakgw:394 #, c-format msgid "Could not install the %s package!" msgstr "%s paketini o'rnatib bo'lmadi!" #: network/netconnect.pm:855 #, c-format msgid "Zeroconf hostname resolution" msgstr "" #: network/netconnect.pm:856 network/netconnect.pm:886 #, c-format msgid "Configuring network device %s (driver %s)" msgstr "Tarmoq uskunasi %s (%s drayveri) moslanmoqda" #: network/netconnect.pm:857 #, c-format msgid "" "The following protocols can be used to configure a LAN connection. Please " "choose the one you want to use" msgstr "" #: network/netconnect.pm:887 #, c-format msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" "Iltimos kompyuterning IP moslamasini kiriting.\n" "Yozuvning har qaysi nuqta bilan ajratilgan o'nlik son shaklida\n" "IP raqam bo'lishi kerak (m-n 1.2.3.4)." #: network/netconnect.pm:894 standalone/drakconnect:373 #, c-format msgid "Assign host name from DHCP address" msgstr "" #: network/netconnect.pm:895 standalone/drakconnect:375 #, c-format msgid "DHCP host name" msgstr "DHCP xostning nomi" #: network/netconnect.pm:900 standalone/drakconnect:321 #: standalone/drakconnect:879 standalone/drakgw:181 #, c-format msgid "Netmask" msgstr "Tarmoq maskasi" #: network/netconnect.pm:902 standalone/drakconnect:437 #, c-format msgid "Track network card id (useful for laptops)" msgstr "" #: network/netconnect.pm:904 standalone/drakconnect:438 #, c-format msgid "Network Hotplugging" msgstr "" #: network/netconnect.pm:906 standalone/drakconnect:432 #, c-format msgid "Start at boot" msgstr "Tizim yuklanayotganda ishga tushirish" #: network/netconnect.pm:908 standalone/drakconnect:460 #, c-format msgid "Metric" msgstr "Metrik" #: network/netconnect.pm:910 standalone/drakconnect:369 #: standalone/drakconnect:882 #, c-format msgid "DHCP client" msgstr "DHCP klienti" #: network/netconnect.pm:912 standalone/drakconnect:379 #, fuzzy, c-format msgid "DHCP timeout (in seconds)" msgstr "Aloqa taymauti (soniyada)" #: network/netconnect.pm:913 standalone/drakconnect:382 #, fuzzy, c-format msgid "Get DNS servers from DHCP" msgstr "DNS serverining IP raqami" #: network/netconnect.pm:914 standalone/drakconnect:383 #, c-format msgid "Get YP servers from DHCP" msgstr "" #: network/netconnect.pm:915 standalone/drakconnect:384 #, c-format msgid "Get NTPD servers from DHCP" msgstr "" #: network/netconnect.pm:923 printer/printerdrake.pm:1672 #: standalone/drakconnect:672 #, c-format msgid "IP address should be in format 1.2.3.4" msgstr "IP raqami quyidagi formatda bo'lishi shart: 1.2.3.4" #: network/netconnect.pm:927 standalone/drakconnect:676 #, fuzzy, c-format msgid "Netmask should be in format 255.255.224.0" msgstr "IP raqami quyidagi formatda bo'lishi shart: 1.2.3.4" #: network/netconnect.pm:931 #, c-format msgid "Warning: IP address %s is usually reserved!" msgstr "" #: network/netconnect.pm:936 standalone/drakTermServ:1816 #: standalone/drakTermServ:1817 standalone/drakTermServ:1818 #, c-format msgid "%s already in use\n" msgstr "%s'dan allaqachon foydalanilmoqda\n" #: network/netconnect.pm:969 #, fuzzy, c-format msgid "Choose an ndiswrapper driver" msgstr "Ixtiyoriy drayver tanlanmoqda" #: network/netconnect.pm:971 #, c-format msgid "Use the ndiswrapper driver %s" msgstr "" #: network/netconnect.pm:971 #, fuzzy, c-format msgid "Install a new driver" msgstr "Drayverni qo'lbola yuklash" #: network/netconnect.pm:983 #, c-format msgid "Select a device:" msgstr "" #: network/netconnect.pm:1008 #, c-format msgid "Please enter the wireless parameters for this card:" msgstr "" #: network/netconnect.pm:1011 standalone/drakconnect:404 #, c-format msgid "Operating Mode" msgstr "" #: network/netconnect.pm:1012 #, c-format msgid "Ad-hoc" msgstr "Ad-hoc" #: network/netconnect.pm:1012 #, c-format msgid "Managed" msgstr "Managed" #: network/netconnect.pm:1012 #, c-format msgid "Master" msgstr "Master" #: network/netconnect.pm:1012 #, c-format msgid "Repeater" msgstr "Repiter" #: network/netconnect.pm:1012 #, c-format msgid "Secondary" msgstr "Ikkilamchi" #: network/netconnect.pm:1012 #, c-format msgid "Auto" msgstr "Avto" #: network/netconnect.pm:1014 standalone/drakconnect:405 #, c-format msgid "Network name (ESSID)" msgstr "" #: network/netconnect.pm:1015 standalone/drakconnect:406 #, c-format msgid "Network ID" msgstr "" #: network/netconnect.pm:1016 standalone/drakconnect:407 #, c-format msgid "Operating frequency" msgstr "" #: network/netconnect.pm:1017 standalone/drakconnect:408 #, c-format msgid "Sensitivity threshold" msgstr "" #: network/netconnect.pm:1018 standalone/drakconnect:409 #, c-format msgid "Bitrate (in b/s)" msgstr "" #: network/netconnect.pm:1019 #, c-format msgid "Encryption mode" msgstr "" #: network/netconnect.pm:1023 standalone/drakconnect:420 #, c-format msgid "RTS/CTS" msgstr "RTS/CTS" #: network/netconnect.pm:1024 #, c-format msgid "" "RTS/CTS adds a handshake before each packet transmission to make sure that " "the\n" "channel is clear. This adds overhead, but increase performance in case of " "hidden\n" "nodes or large number of active nodes. This parameter sets the size of the\n" "smallest packet for which the node sends RTS, a value equal to the maximum\n" "packet size disable the scheme. You may also set this parameter to auto, " "fixed\n" "or off." msgstr "" #: network/netconnect.pm:1031 standalone/drakconnect:421 #, c-format msgid "Fragmentation" msgstr "" #: network/netconnect.pm:1032 standalone/drakconnect:422 #, c-format msgid "Iwconfig command extra arguments" msgstr "" #: network/netconnect.pm:1033 #, c-format msgid "" "Here, one can configure some extra wireless parameters such as:\n" "ap, channel, commit, enc, power, retry, sens, txpower (nick is already set " "as the hostname).\n" "\n" "See iwconfig(8) man page for further information." msgstr "" #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one #: network/netconnect.pm:1040 standalone/drakconnect:423 #, c-format msgid "Iwspy command extra arguments" msgstr "" #: network/netconnect.pm:1041 #, c-format msgid "" "Iwspy is used to set a list of addresses in a wireless network\n" "interface and to read back quality of link information for each of those.\n" "\n" "This information is the same as the one available in /proc/net/wireless :\n" "quality of the link, signal strength and noise level.\n" "\n" "See iwpspy(8) man page for further information." msgstr "" #: network/netconnect.pm:1050 standalone/drakconnect:424 #, c-format msgid "Iwpriv command extra arguments" msgstr "" #: network/netconnect.pm:1051 #, c-format msgid "" "Iwpriv enable to set up optionals (private) parameters of a wireless " "network\n" "interface.\n" "\n" "Iwpriv deals with parameters and setting specific to each driver (as opposed " "to\n" "iwconfig which deals with generic ones).\n" "\n" "In theory, the documentation of each device driver should indicate how to " "use\n" "those interface specific commands and their effect.\n" "\n" "See iwpriv(8) man page for further information." msgstr "" #: network/netconnect.pm:1066 #, c-format msgid "" "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz " "frequency), or add enough '0' (zeroes)." msgstr "" "Chastota \"M\" yoki \"G\" bilan tugashi kerak (masalan, 2.46 GHz uchun\n" "\"2.46G\"), yoki etarlicha \"0\" (nol) qo'shing." #: network/netconnect.pm:1070 #, c-format msgid "" "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add " "enough '0' (zeroes)." msgstr "" #: network/netconnect.pm:1110 #, c-format msgid "DVB configuration" msgstr "" #: network/netconnect.pm:1111 #, c-format msgid "DVB Adapter" msgstr "" #: network/netconnect.pm:1128 #, c-format msgid "DVB adapter settings" msgstr "" #: network/netconnect.pm:1131 #, c-format msgid "Adapter card" msgstr "" #: network/netconnect.pm:1132 #, c-format msgid "Net demux" msgstr "" #: network/netconnect.pm:1133 #, c-format msgid "PID" msgstr "" #: network/netconnect.pm:1161 #, c-format msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one." msgstr "" #: network/netconnect.pm:1166 #, c-format msgid "Last but not least you can also type in your DNS server IP addresses." msgstr "" #: network/netconnect.pm:1168 standalone/drakconnect:992 #, c-format msgid "Host name (optional)" msgstr "Xostning nomi (tanlab bo'ladi)" #: network/netconnect.pm:1168 standalone/drakhosts:194 #, c-format msgid "Host name" msgstr "Kompyuterning nomi" #: network/netconnect.pm:1170 #, c-format msgid "DNS server 1" msgstr "DNS serveri 1" #: network/netconnect.pm:1171 #, c-format msgid "DNS server 2" msgstr "DNS serveri 2" #: network/netconnect.pm:1172 #, c-format msgid "DNS server 3" msgstr "DNS serveri 3" #: network/netconnect.pm:1173 #, c-format msgid "Search domain" msgstr "" #: network/netconnect.pm:1174 #, c-format msgid "By default search domain will be set from the fully-qualified host name" msgstr "" #: network/netconnect.pm:1175 #, c-format msgid "Gateway (e.g. %s)" msgstr "Geytvey (m-n %s)" #: network/netconnect.pm:1177 #, c-format msgid "Gateway device" msgstr "Geytvey uskunasi" #: network/netconnect.pm:1186 #, c-format msgid "DNS server address should be in format 1.2.3.4" msgstr "DNS serverning manzili quyidagi formatda bo'lishi shart: 1.2.3.4" #: network/netconnect.pm:1191 standalone/drakconnect:681 #, c-format msgid "Gateway address should be in format 1.2.3.4" msgstr "" #: network/netconnect.pm:1204 #, c-format msgid "" "If desired, enter a Zeroconf hostname.\n" "This is the name your machine will use to advertise any of\n" "its shared resources that are not managed by the network.\n" "It is not necessary on most networks." msgstr "" #: network/netconnect.pm:1208 #, c-format msgid "Zeroconf Host name" msgstr "Zeroconf kompyuterning nomi" #: network/netconnect.pm:1211 #, c-format msgid "Zeroconf host name must not contain a ." msgstr "Zeroconf kompyuterning nomida \".\" belgisi bo'lmashi kerak" #: network/netconnect.pm:1221 #, fuzzy, c-format msgid "Do you want to allow users to start the connection?" msgstr "Tizim yuklanayotganda ulanishni istaysizmi?" #: network/netconnect.pm:1234 #, c-format msgid "Do you want to start the connection at boot?" msgstr "Tizim yuklanayotganda ulanishni istaysizmi?" #: network/netconnect.pm:1249 #, c-format msgid "Automatically at boot" msgstr "Tizim yuklanayotganda ishga tushirish" #: network/netconnect.pm:1251 #, c-format msgid "By using Net Applet in the system tray" msgstr "" #: network/netconnect.pm:1253 #, c-format msgid "Manually (the interface would still be activated at boot)" msgstr "" #: network/netconnect.pm:1262 #, fuzzy, c-format msgid "How do you want to dial this connection?" msgstr "Tizim yuklanayotganda ulanishni istaysizmi?" #: network/netconnect.pm:1275 #, c-format msgid "Do you want to try to connect to the Internet now?" msgstr "Internetga ulanishga urinib ko'rishni istaysizmi?" #: network/netconnect.pm:1283 standalone/drakconnect:1024 #, c-format msgid "Testing your connection..." msgstr "Aloqa sinab ko'rilmoqda..." #: network/netconnect.pm:1303 #, c-format msgid "The system is now connected to the Internet." msgstr "Tizim Internetga ulangan." #: network/netconnect.pm:1304 #, c-format msgid "For security reasons, it will be disconnected now." msgstr "" #: network/netconnect.pm:1305 #, c-format msgid "" "The system does not seem to be connected to the Internet.\n" "Try to reconfigure your connection." msgstr "" "Tizim Internetga ulanmaganga o'xshaydi.\n" "Aloqani boshqadan moslashga urinib ko'ring." #: network/netconnect.pm:1320 #, c-format msgid "" "Congratulations, the network and Internet configuration is finished.\n" "\n" msgstr "" "Tabriklaymiz, tarmoqni va Internetni moslash tugadi.\n" "\n" #: network/netconnect.pm:1323 #, c-format msgid "" "After this is done, we recommend that you restart your X environment to " "avoid any hostname-related problems." msgstr "" "Bu tugaganidan so'ng, kompyuterning nomi bilan bog'liq bo'lgan muammolarni " "oldini olish uchun X muhitingizni boshqadan ishga tushirishni biz tavsiya " "qilamiz." #: network/netconnect.pm:1324 #, c-format msgid "" "Problems occurred during configuration.\n" "Test your connection via net_monitor or mcc. If your connection does not " "work, you might want to relaunch the configuration." msgstr "" #: network/netconnect.pm:1335 #, c-format msgid "(detected on port %s)" msgstr "(%s portida topildi)" #. -PO: here, "(detected)" string will be appended to eg "ADSL connection" #: network/netconnect.pm:1337 #, c-format msgid "(detected %s)" msgstr "(%s topildi)" #: network/netconnect.pm:1337 #, c-format msgid "(detected)" msgstr "(topildi)" #: network/netconnect.pm:1338 #, c-format msgid "Network Configuration" msgstr "Tarmoqni moslash" #: network/netconnect.pm:1339 #, c-format msgid "" "Because you are doing a network installation, your network is already " "configured.\n" "Click on Ok to keep your configuration, or cancel to reconfigure your " "Internet & Network connection.\n" msgstr "" "Tarmoqdan o'rnatayotganingiz uchun tarmoq allaqachon moslangan.\n" "Tarmoqni moslamalarini saqlab qolish uchun \"Ok\" tugmasini bosing, " "Internetga va tarmoqga ulanishni boshqadan moslash uchun \"Bekor qilish\" " "tugmasini bosing.\n" #: network/netconnect.pm:1342 #, c-format msgid "The network needs to be restarted. Do you want to restart it?" msgstr "" "Tarmoqni boshqadan ishga tushirish kerak. Uni boshqadan ishga tushirishni " "istaysizmi?" #: network/netconnect.pm:1343 #, c-format msgid "" "A problem occurred while restarting the network: \n" "\n" "%s" msgstr "" "Tarmoqni boshqadan ishga tushirishda quyidagi xato ro'y berdi: \n" "\n" "%s" #: network/netconnect.pm:1344 #, c-format msgid "" "We are now going to configure the %s connection.\n" "\n" "\n" "Press \"%s\" to continue." msgstr "" "Endi biz %s ulanishni moslash arafasidamiz.\n" "\n" "\n" "Davom etish uchun \"%s\" tugmasini bosing." #: network/netconnect.pm:1345 #, c-format msgid "Configuration is complete, do you want to apply settings?" msgstr "Moslash bajarildi, moslamalarni qo'llashni istaysizmi?" #: network/netconnect.pm:1346 #, c-format msgid "" "You have configured multiple ways to connect to the Internet.\n" "Choose the one you want to use.\n" "\n" msgstr "" "Internetga ulanish uchun siz bir necha usullarni mosladingiz.\n" "Foydalanish uchun bittasini tanlang.\n" "\n" #: network/netconnect.pm:1347 #, c-format msgid "Internet connection" msgstr "Internetga ulanish" #: network/netconnect.pm:1364 #, c-format msgid "" "An unexpected error has happened:\n" "%s" msgstr "" "Kutilmagan xato ro'y berdi:\n" "%s" #: network/network.pm:390 #, c-format msgid "Proxies configuration" msgstr "Proksilarni moslash" #: network/network.pm:391 #, c-format msgid "HTTP proxy" msgstr "HTTP proksi" #: network/network.pm:392 #, c-format msgid "FTP proxy" msgstr "FTP proksi" #: network/network.pm:395 #, c-format msgid "Proxy should be http://..." msgstr "Proksi \"http://...\" bo'lishi kerak" #: network/network.pm:396 #, c-format msgid "URL should begin with 'ftp:' or 'http:'" msgstr "URL \"'ftp:\" yoki \"http:\" bilan boshlanishi shart" #: network/shorewall.pm:54 #, c-format msgid "" "Please enter the name of the interface connected to the internet.\n" "\n" "Examples:\n" "\t\tppp+ for modem or DSL connections, \n" "\t\teth0, or eth1 for cable connection, \n" "\t\tippp+ for a isdn connection.\n" msgstr "" "Iltimos Internetga ulangan interfeysni ko'rsating.\n" "\n" "Masalan:\n" "\t\tppp+ modem yoki DSL orqali ulanish uchun,\n" "\t\teth0 yoki eth1 kabel orqali ulanish uchun,\n" "\t\tippp+ ISDN orqali ulanish uchun.\n" #: network/thirdparty.pm:197 #, fuzzy, c-format msgid "Copy the Alcatel microcode as mgmt.o in /usr/share/speedtouch/" msgstr "" "Sizga Alcatel mikro-kodi kerak.\n" "Uni\n" "%s\n" "dan yozib oling va mgmt.o faylini /usr/share/speedtouch direktoriyasiga " "ko'chiring." #: network/thirdparty.pm:206 #, c-format msgid "" "The ECI Hi-Focus modem cannot be supported due to binary driver distribution " "problem.\n" "\n" "You can find a driver on http://eciadsl.flashtux.org/" msgstr "" #: network/thirdparty.pm:267 #, fuzzy, c-format msgid "Could not install the packages (%s)!" msgstr "%s paketlarini o'rnatib bo'lmadi!" #: network/thirdparty.pm:275 #, c-format msgid "Some packages (%s) are required but aren't available." msgstr "" #: network/thirdparty.pm:276 #, c-format msgid "" "These packages can be found in Mandriva Club or in Mandriva commercial " "releases." msgstr "" #: network/thirdparty.pm:277 #, c-format msgid "" "The required files can also be installed from this URL:\n" "%s" msgstr "" #: network/thirdparty.pm:310 #, fuzzy, c-format msgid "Unable to find \"%s\" on your Windows system!" msgstr "Tizimdan shriftlarni olib tashlash" #: network/thirdparty.pm:312 #, c-format msgid "No Windows system has been detected!" msgstr "" #: network/thirdparty.pm:322 #, c-format msgid "Insert floppy" msgstr "Disketni qo'ying" #: network/thirdparty.pm:323 #, c-format msgid "" "Insert a FAT formatted floppy in drive %s with %s in root directory and " "press %s" msgstr "" #: network/thirdparty.pm:333 #, c-format msgid "Floppy access error, unable to mount device %s" msgstr "" #: network/thirdparty.pm:343 #, c-format msgid "" "You need the Alcatel microcode.\n" "You can provide it now via a floppy or your windows partition,\n" "or skip and do it later." msgstr "" #: network/thirdparty.pm:347 network/thirdparty.pm:349 #, c-format msgid "Use a floppy" msgstr "Disketdan foydalanish" #: network/thirdparty.pm:347 #, c-format msgid "Use my Windows partition" msgstr "Diskning Windows qismini ishlatish" #: network/thirdparty.pm:357 #, c-format msgid "Firmware copy failed, file %s not found" msgstr "" #: network/thirdparty.pm:362 standalone/drakautoinst:250 #: standalone/drakvpn:888 standalone/scannerdrake:405 #, c-format msgid "Congratulations!" msgstr "Tabriklaymiz!" #: network/thirdparty.pm:362 #, c-format msgid "Firmware copy succeeded" msgstr "" #: network/thirdparty.pm:427 #, c-format msgid "Looking for required software and drivers..." msgstr "" #: network/thirdparty.pm:437 #, fuzzy, c-format msgid "Please wait, running device configuration commands..." msgstr "Iltimos kutib turing, asbob-uskunalar aniqlanmoqda va moslanmoqda..." #: partition_table.pm:391 #, c-format msgid "mount failed: " msgstr "ulash muvaffaqiyatsiz tugadi: " #: partition_table.pm:496 #, c-format msgid "Extended partition not supported on this platform" msgstr "" #: partition_table.pm:514 #, c-format msgid "" "You have a hole in your partition table but I can not use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions." msgstr "" #: partition_table.pm:605 #, c-format msgid "Restoring from file %s failed: %s" msgstr "Fayldan (%s) qayta tiklash muvaffaqiyatsiz tugadi: %s" #: partition_table.pm:607 #, c-format msgid "Bad backup file" msgstr "" #: partition_table.pm:627 #, c-format msgid "Error writing to file %s" msgstr "Faylga (%s) yozishda xato" #: partition_table/raw.pm:252 #, c-format msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random, corrupted " "data." msgstr "" #: pkgs.pm:21 #, c-format msgid "must have" msgstr "bo'lishi shart" #: pkgs.pm:22 #, c-format msgid "important" msgstr "muhim" #: pkgs.pm:23 #, c-format msgid "very nice" msgstr "juda yaxshi" #: pkgs.pm:24 #, c-format msgid "nice" msgstr "yaxshi" #: pkgs.pm:25 #, c-format msgid "maybe" msgstr "balki" #: pkgs.pm:458 #, fuzzy, c-format msgid "Downloading file %s..." msgstr "Fayllar jo'natilmoqda..." #: printer/cups.pm:103 #, c-format msgid "(on %s)" msgstr "(%s'da)" #: printer/cups.pm:103 #, c-format msgid "(on this machine)" msgstr "(shu kompyuterda)" #: printer/cups.pm:115 standalone/printerdrake:187 #, c-format msgid "Configured on other machines" msgstr "Boshqa kompyuterlarda moslangan" #: printer/cups.pm:117 #, c-format msgid "On CUPS server \"%s\"" msgstr "CUPS serverida \"%s\"" #: printer/cups.pm:117 printer/printerdrake.pm:4761 #: printer/printerdrake.pm:4771 printer/printerdrake.pm:4916 #: printer/printerdrake.pm:4927 printer/printerdrake.pm:5137 #, c-format msgid " (Default)" msgstr " (Andoza)" #: printer/data.pm:60 #, c-format msgid "PDQ - Print, Do not Queue" msgstr "PDQ - Navbatga qo'ymasdan bosib chiqarish" #: printer/data.pm:61 #, c-format msgid "PDQ" msgstr "PDQ" #: printer/data.pm:73 #, c-format msgid "LPD - Line Printer Daemon" msgstr "" #: printer/data.pm:74 #, c-format msgid "LPD" msgstr "LPD" #: printer/data.pm:95 #, c-format msgid "LPRng - LPR New Generation" msgstr "LPRng - LPR'ning yangi avlodi" #: printer/data.pm:96 #, c-format msgid "LPRng" msgstr "LPRng" #: printer/data.pm:121 #, c-format msgid "CUPS - Common Unix Printing System" msgstr "CUPS - Umumiy Yuniks Bosib chiqarish Tizimi" #: printer/data.pm:151 #, c-format msgid "CUPS - Common Unix Printing System (remote server)" msgstr "CUPS - Umumiy Yuniks Bosib chiqarish Tizimi (masofadagi server)" #: printer/data.pm:152 #, c-format msgid "Remote CUPS" msgstr "Masofadagi CUPS" #: printer/detect.pm:156 printer/detect.pm:239 printer/detect.pm:441 #: printer/detect.pm:478 #, c-format msgid "Unknown Model" msgstr "Noma'lum model" #: printer/main.pm:27 #, c-format msgid "Local printer" msgstr "Lokal printer" #: printer/main.pm:28 #, c-format msgid "Remote printer" msgstr "Masofadagi printer" #: printer/main.pm:29 #, c-format msgid "Printer on remote CUPS server" msgstr "Masofadagi CUPS serveridagi printer" #: printer/main.pm:30 printer/printerdrake.pm:1150 #: printer/printerdrake.pm:1695 #, c-format msgid "Printer on remote lpd server" msgstr "Masofadagi LPD serveridagi printer" #: printer/main.pm:31 #, c-format msgid "Network printer (TCP/Socket)" msgstr "Tarmoqdagi printer (TCP/Socket)" #: printer/main.pm:32 #, c-format msgid "Printer on SMB/Windows 95/98/NT server" msgstr "SMB/Windows 95/98/NT serveridagi printer" #: printer/main.pm:33 #, c-format msgid "Printer on NetWare server" msgstr "NetWare serveridagi printer" #: printer/main.pm:34 printer/printerdrake.pm:1699 #, c-format msgid "Enter a printer device URI" msgstr "Bosib chiqarish uskunasining URI'ni kiriting" #: printer/main.pm:35 #, c-format msgid "Pipe job into a command" msgstr "Vazifaning natijasini buyrug'ga ulash (pipe)" #: printer/main.pm:45 #, c-format msgid "recommended" msgstr "tavsiya qilinadi" #: printer/main.pm:329 printer/main.pm:634 printer/main.pm:1671 #: printer/main.pm:2706 printer/main.pm:2715 printer/printerdrake.pm:910 #: printer/printerdrake.pm:2182 printer/printerdrake.pm:5174 #, c-format msgid "Unknown model" msgstr "Noma'lum model" #: printer/main.pm:354 standalone/printerdrake:186 #, c-format msgid "Configured on this machine" msgstr "Shu kompyuterda moslangan" #: printer/main.pm:360 printer/printerdrake.pm:1239 #, c-format msgid " on parallel port #%s" msgstr " #%s parallel portida" #: printer/main.pm:363 printer/printerdrake.pm:1242 #, c-format msgid ", USB printer #%s" msgstr ", USB printer \\#%s" #: printer/main.pm:365 #, c-format msgid ", USB printer" msgstr ", USB printer" #: printer/main.pm:369 #, fuzzy, c-format msgid ", HP printer on a parallel port" msgstr "\\#%s parallel portidagi printer" #: printer/main.pm:371 #, fuzzy, c-format msgid ", HP printer on USB" msgstr ", USB printer" #: printer/main.pm:373 #, fuzzy, c-format msgid ", HP printer on HP JetDirect" msgstr ", HP JetDirect'dagi ko'p amalli uskuna" #: printer/main.pm:375 #, fuzzy, c-format msgid ", HP printer" msgstr ", USB printer" #: printer/main.pm:381 #, c-format msgid ", multi-function device on parallel port #%s" msgstr ", \\#%s parallel portidagi ko'p amalli uskuna" #: printer/main.pm:384 #, c-format msgid ", multi-function device on a parallel port" msgstr ", parallel portidagi ko'p amalli uskuna" #: printer/main.pm:386 #, c-format msgid ", multi-function device on USB" msgstr ", USB portidagi ko'p amalli uskuna" #: printer/main.pm:388 #, c-format msgid ", multi-function device on HP JetDirect" msgstr ", HP JetDirect'dagi ko'p amalli uskuna" #: printer/main.pm:390 #, c-format msgid ", multi-function device" msgstr ", ko'p amalli uskuna" #: printer/main.pm:394 #, c-format msgid ", printing to %s" msgstr ", %s yordamida bosib chiqarilmoqda" #: printer/main.pm:397 #, c-format msgid " on LPD server \"%s\", printer \"%s\"" msgstr " LPD serverida \"%s\", printer \"%s\"" #: printer/main.pm:400 #, c-format msgid ", TCP/IP host \"%s\", port %s" msgstr ", TCP/IP xost \"%s\", port %s" #: printer/main.pm:405 #, c-format msgid " on SMB/Windows server \"%s\", share \"%s\"" msgstr "" #: printer/main.pm:410 #, c-format msgid " on Novell server \"%s\", printer \"%s\"" msgstr " Novell serverida \"%s\", printer \"%s\"" #: printer/main.pm:413 #, c-format msgid ", using command %s" msgstr ", %s buyrug'i yordamida" #: printer/main.pm:428 #, c-format msgid "Parallel port #%s" msgstr "Parallel porti #%s" #: printer/main.pm:431 printer/printerdrake.pm:1260 #: printer/printerdrake.pm:1287 printer/printerdrake.pm:1305 #, c-format msgid "USB printer #%s" msgstr "USB printer \\#%s" #: printer/main.pm:433 #, c-format msgid "USB printer" msgstr "USB printer" #: printer/main.pm:437 #, fuzzy, c-format msgid "HP printer on a parallel port" msgstr "\\#%s parallel portidagi printer" #: printer/main.pm:439 #, fuzzy, c-format msgid "HP printer on USB" msgstr "Hech qanday printer topilmadi!" #: printer/main.pm:441 #, fuzzy, c-format msgid "HP printer on HP JetDirect" msgstr ", HP JetDirect'dagi ko'p amalli uskuna" #: printer/main.pm:443 #, fuzzy, c-format msgid "HP printer" msgstr "Printer" #: printer/main.pm:449 #, c-format msgid "Multi-function device on parallel port #%s" msgstr "Parallel portidagi (#%s) ko'p amalli uskuna" #: printer/main.pm:452 #, c-format msgid "Multi-function device on a parallel port" msgstr "Parallel portidagi ko'p amalli uskuna" #: printer/main.pm:454 #, c-format msgid "Multi-function device on USB" msgstr "USB portidagi ko'p amalli uskuna" #: printer/main.pm:456 #, c-format msgid "Multi-function device on HP JetDirect" msgstr "HP JetDirect'dagi ko'p amalli uskuna" #: printer/main.pm:458 #, c-format msgid "Multi-function device" msgstr "Ko'p amalli uskuna" #: printer/main.pm:462 #, c-format msgid "Prints into %s" msgstr "%s yordamida bosib chiqarilmoqda" #: printer/main.pm:465 #, c-format msgid "LPD server \"%s\", printer \"%s\"" msgstr "LPD server \"%s\", printer \"%s\"" #: printer/main.pm:468 #, c-format msgid "TCP/IP host \"%s\", port %s" msgstr "TCP/IP xost \"%s\", port %s" #: printer/main.pm:473 #, c-format msgid "SMB/Windows server \"%s\", share \"%s\"" msgstr "SMB/Windows serveri \"%s\", printer \"%s\"" #: printer/main.pm:478 #, c-format msgid "Novell server \"%s\", printer \"%s\"" msgstr "Novell serveri \"%s\", printer \"%s\"" #: printer/main.pm:481 #, c-format msgid "Uses command %s" msgstr "%s buyrug'i yordamida" #: printer/main.pm:483 #, c-format msgid "URI: %s" msgstr "URI: %s" #: printer/main.pm:631 printer/printerdrake.pm:856 #: printer/printerdrake.pm:2953 #, c-format msgid "Raw printer (No driver)" msgstr "" #: printer/main.pm:1181 printer/printerdrake.pm:211 #: printer/printerdrake.pm:223 #, c-format msgid "Local network(s)" msgstr "Lokal tarmoq(lar)" #: printer/main.pm:1183 printer/printerdrake.pm:227 #, c-format msgid "Interface \"%s\"" msgstr "Interfeys \"%s\"" #: printer/main.pm:1185 #, c-format msgid "Network %s" msgstr "Tarmoq %s" #: printer/main.pm:1187 #, c-format msgid "Host %s" msgstr "Xostning nomi %s" #: printer/main.pm:1216 #, c-format msgid "%s (Port %s)" msgstr "%s (Port %s)" #: printer/printerdrake.pm:24 #, c-format msgid "" "The HP LaserJet 1000 needs its firmware to be uploaded after being turned " "on. Download the Windows driver package from the HP web site (the firmware " "on the printer's CD does not work) and extract the firmware file from it by " "decompressing the self-extracting '.exe' file with the 'unzip' utility and " "searching for the 'sihp1000.img' file. Copy this file into the '/etc/" "printer' directory. There it will be found by the automatic uploader script " "and uploaded whenever the printer is connected and turned on.\n" msgstr "" #: printer/printerdrake.pm:67 #, c-format msgid "CUPS printer configuration" msgstr "CUPS printerini moslash" #: printer/printerdrake.pm:68 #, c-format msgid "" "Here you can choose whether the printers connected to this machine should be " "accessible by remote machines and by which remote machines." msgstr "" "Bu erda, bu kompyuterga ulangan printerdan boshqa kompyuter va qaysi " "kompyuter foydalansa bo'ladimi-yo'qmi tanlashingiz mumkin." #: printer/printerdrake.pm:69 #, c-format msgid "" "You can also decide here whether printers on remote machines should be " "automatically made available on this machine." msgstr "" #: printer/printerdrake.pm:72 #, c-format msgid "The printers on this machine are available to other computers" msgstr "" "Boshqa kompyuterlar shu kompyuterdagi printerlardan foydalanishi mumkin" #: printer/printerdrake.pm:77 #, c-format msgid "Automatically find available printers on remote machines" msgstr "" "Masofadagi kompyuterda mavjud bo'lgan printerlarni avtomatik ravishda " "aniqlash" #: printer/printerdrake.pm:82 #, c-format msgid "Printer sharing on hosts/networks: " msgstr "" #: printer/printerdrake.pm:84 #, c-format msgid "Custom configuration" msgstr "Boshqacha moslash" #: printer/printerdrake.pm:89 standalone/scannerdrake:593 #: standalone/scannerdrake:610 #, c-format msgid "No remote machines" msgstr "Masofadagi kompyuter yo'q" #: printer/printerdrake.pm:100 #, c-format msgid "Additional CUPS servers: " msgstr "Qo'shimcha CUPS serverlar: " #: printer/printerdrake.pm:107 #, c-format msgid "" "To get access to printers on remote CUPS servers in your local network you " "only need to turn on the \"Automatically find available printers on remote " "machines\" option; the CUPS servers inform your machine automatically about " "their printers. All printers currently known to your machine are listed in " "the \"Remote printers\" section in the main window of Printerdrake. If your " "CUPS server(s) is/are not in your local network, you have to enter the IP " "address(es) and optionally the port number(s) here to get the printer " "information from the server(s)." msgstr "" #: printer/printerdrake.pm:115 #, c-format msgid "Japanese text printing mode" msgstr "Yapon matnlarini bosib chiqarish usuli" #: printer/printerdrake.pm:116 #, c-format msgid "" "Turning on this allows to print plain text files in Japanese language. Only " "use this function if you really want to print text in Japanese, if it is " "activated you cannot print accentuated characters in latin fonts any more " "and you will not be able to adjust the margins, the character size, etc. " "This setting only affects printers defined on this machine. If you want to " "print Japanese text on a printer set up on a remote machine, you have to " "activate this function on that remote machine." msgstr "" #: printer/printerdrake.pm:123 #, c-format msgid "Automatic correction of CUPS configuration" msgstr "CUPS'ning moslamasini avtomatik ravishda to'g'rilash" #: printer/printerdrake.pm:125 #, c-format msgid "" "When this option is turned on, on every startup of CUPS it is automatically " "made sure that\n" "\n" "- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n" "\n" "- if /etc/cups/cupsd.conf is missing, it will be created\n" "\n" "- when printer information is broadcasted, it does not contain \"localhost\" " "as the server name.\n" "\n" "If some of these measures lead to problems for you, turn this option off, " "but then you have to take care of these points." msgstr "" #: printer/printerdrake.pm:138 printer/printerdrake.pm:506 #: printer/printerdrake.pm:4397 #, c-format msgid "Remote CUPS server and no local CUPS daemon" msgstr "" #: printer/printerdrake.pm:141 #, fuzzy, c-format msgid "On" msgstr "Ummon" #: printer/printerdrake.pm:143 printer/printerdrake.pm:498 #: printer/printerdrake.pm:525 #, c-format msgid "Off" msgstr "" #: printer/printerdrake.pm:144 printer/printerdrake.pm:507 #, c-format msgid "" "In this mode the local CUPS daemon will be stopped and all printing requests " "go directly to the server specified below. Note that it is not possible to " "define local print queues then and if the specified server is down it cannot " "be printed at all from this machine." msgstr "" #: printer/printerdrake.pm:161 printer/printerdrake.pm:236 #, c-format msgid "Sharing of local printers" msgstr "" #: printer/printerdrake.pm:162 #, c-format msgid "" "These are the machines and networks on which the locally connected printer" "(s) should be available:" msgstr "" "Quyidagi kompyuterlar va tarmoqlar shu kompyuterga ulangan printer(lar)dan " "foydalanishi mumkin:" #: printer/printerdrake.pm:173 #, c-format msgid "Add host/network" msgstr "Xostni/tarmoqni qo'shish" #: printer/printerdrake.pm:179 #, c-format msgid "Edit selected host/network" msgstr "Tanlangan xostni/tarmoqni tuzatish" #: printer/printerdrake.pm:188 #, c-format msgid "Remove selected host/network" msgstr "Tanlangan xostni/tarmoqni olib tashlash" #: printer/printerdrake.pm:219 printer/printerdrake.pm:229 #: printer/printerdrake.pm:241 printer/printerdrake.pm:248 #: printer/printerdrake.pm:279 printer/printerdrake.pm:297 #, c-format msgid "IP address of host/network:" msgstr "Xostning/tarmoqning IP raqami:" #: printer/printerdrake.pm:237 #, c-format msgid "" "Choose the network or host on which the local printers should be made " "available:" msgstr "" #: printer/printerdrake.pm:244 #, c-format msgid "Host/network IP address missing." msgstr "Xostning/tarmoqning IP raqami aniqlanmagan." #: printer/printerdrake.pm:252 #, c-format msgid "The entered host/network IP is not correct.\n" msgstr "Ko'rsatilgan xost/tarmoq no'to'g'ri.\n" #: printer/printerdrake.pm:253 printer/printerdrake.pm:429 #, c-format msgid "Examples for correct IPs:\n" msgstr "To'g'ri IP raqamlarning misoli:\n" #: printer/printerdrake.pm:277 #, c-format msgid "This host/network is already in the list, it cannot be added again.\n" msgstr "Bu xost/tarmoq allaqachon ro'yxatda, uni yana qo'shib bo'lmaydi.\n" #: printer/printerdrake.pm:346 printer/printerdrake.pm:416 #, c-format msgid "Accessing printers on remote CUPS servers" msgstr "" #: printer/printerdrake.pm:347 #, c-format msgid "" "Add here the CUPS servers whose printers you want to use. You only need to " "do this if the servers do not broadcast their printer information into the " "local network." msgstr "" #: printer/printerdrake.pm:358 #, c-format msgid "Add server" msgstr "Serverni qo'shish" #: printer/printerdrake.pm:364 #, c-format msgid "Edit selected server" msgstr "Tanlangan serverni tuzatish" #: printer/printerdrake.pm:373 #, c-format msgid "Remove selected server" msgstr "Tanlangan serverni olib tashlash" #: printer/printerdrake.pm:417 #, c-format msgid "Enter IP address and port of the host whose printers you want to use." msgstr "" "Printerlaridan foydalanmoqchi bo'lgan kompyuterning IP raqamini va portini " "kiriting." #: printer/printerdrake.pm:418 #, c-format msgid "If no port is given, 631 will be taken as default." msgstr "" "Agar hech qanday port ko'rsatilmasa, andoza sifatida 631 qabul qilinadi." #: printer/printerdrake.pm:422 #, c-format msgid "Server IP missing!" msgstr "Serverning IP raqami aniqlanmagan!" #: printer/printerdrake.pm:428 #, c-format msgid "The entered IP is not correct.\n" msgstr "Kiritilgan IP noto'g'ri.\n" #: printer/printerdrake.pm:440 printer/printerdrake.pm:1924 #, c-format msgid "The port number should be an integer!" msgstr "Portning raqami butun son bo'lishi shart!" #: printer/printerdrake.pm:451 #, c-format msgid "This server is already in the list, it cannot be added again.\n" msgstr "Server allaqachon ro'yxatda, uni yana qo'shib bo'lmaydi.\n" #: printer/printerdrake.pm:462 printer/printerdrake.pm:1951 #: standalone/drakups:251 standalone/harddrake2:52 #, c-format msgid "Port" msgstr "Port" #: printer/printerdrake.pm:495 printer/printerdrake.pm:511 #: printer/printerdrake.pm:526 printer/printerdrake.pm:530 #: printer/printerdrake.pm:536 #, fuzzy, c-format msgid "On, Name or IP of remote server:" msgstr "Masofadagi LPD serveridagi printer" #: printer/printerdrake.pm:514 printer/printerdrake.pm:4406 #: printer/printerdrake.pm:4472 #, c-format msgid "CUPS server name or IP address missing." msgstr "CUPS serverning nomi yoki IP raqami ko'rsatilmagan." #: printer/printerdrake.pm:566 printer/printerdrake.pm:586 #: printer/printerdrake.pm:680 printer/printerdrake.pm:746 #: printer/printerdrake.pm:773 printer/printerdrake.pm:832 #: printer/printerdrake.pm:874 printer/printerdrake.pm:884 #: printer/printerdrake.pm:2011 printer/printerdrake.pm:2225 #: printer/printerdrake.pm:2257 printer/printerdrake.pm:2305 #: printer/printerdrake.pm:2357 printer/printerdrake.pm:2374 #: printer/printerdrake.pm:2418 printer/printerdrake.pm:2458 #: printer/printerdrake.pm:2508 printer/printerdrake.pm:2542 #: printer/printerdrake.pm:2552 printer/printerdrake.pm:2804 #: printer/printerdrake.pm:2809 printer/printerdrake.pm:2948 #: printer/printerdrake.pm:3059 printer/printerdrake.pm:3656 #: printer/printerdrake.pm:3722 printer/printerdrake.pm:3771 #: printer/printerdrake.pm:3774 printer/printerdrake.pm:3906 #: printer/printerdrake.pm:4007 printer/printerdrake.pm:4079 #: printer/printerdrake.pm:4100 printer/printerdrake.pm:4110 #: printer/printerdrake.pm:4201 printer/printerdrake.pm:4296 #: printer/printerdrake.pm:4302 printer/printerdrake.pm:4326 #: printer/printerdrake.pm:4433 printer/printerdrake.pm:4542 #: printer/printerdrake.pm:4562 printer/printerdrake.pm:4571 #: printer/printerdrake.pm:4586 printer/printerdrake.pm:4784 #: printer/printerdrake.pm:5236 printer/printerdrake.pm:5313 #: standalone/printerdrake:67 standalone/printerdrake:554 #, c-format msgid "Printerdrake" msgstr "Printerdrake" #: printer/printerdrake.pm:567 printer/printerdrake.pm:4008 #: printer/printerdrake.pm:4543 #, c-format msgid "Reading printer data..." msgstr "Printer haqida ma'lumot o'qilmoqda..." #: printer/printerdrake.pm:587 #, c-format msgid "Restarting CUPS..." msgstr "CUPS boshqadan ishga tushirilmoqda..." #: printer/printerdrake.pm:614 printer/printerdrake.pm:634 #, c-format msgid "Select Printer Connection" msgstr "Printerga ulanishni tanlang" #: printer/printerdrake.pm:615 #, c-format msgid "How is the printer connected?" msgstr "Printer qaday ulangan?" #: printer/printerdrake.pm:617 #, c-format msgid "" "\n" "Printers on remote CUPS servers do not need to be configured here; these " "printers will be automatically detected." msgstr "" "\n" "Masofadagi CUPS serveridagi printerlarni moslashingiz shart emas, ular " "avtomatik ravishda aniqlanadi." #: printer/printerdrake.pm:620 printer/printerdrake.pm:4786 #, c-format msgid "" "\n" "WARNING: No local network connection active, remote printers can neither be " "detected nor tested!" msgstr "" #: printer/printerdrake.pm:627 #, c-format msgid "" "Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)" msgstr "" #: printer/printerdrake.pm:629 #, c-format msgid "Modify timeout for network printer auto-detection" msgstr "" #: printer/printerdrake.pm:635 #, c-format msgid "Enter the timeout for network printer auto-detection (in msec) here. " msgstr "" #: printer/printerdrake.pm:637 #, c-format msgid "" "The longer you choose the timeout, the more reliable the detections of " "network printers will be, but the scan can take longer then, especially if " "there are many machines with local firewalls in the network. " msgstr "" #: printer/printerdrake.pm:641 #, fuzzy, c-format msgid "The timeout must be a positive integer number!" msgstr "Parametr %s butun son bo'lishi kerak!" #: printer/printerdrake.pm:680 #, c-format msgid "Checking your system..." msgstr "Tizim tekshirilmoqda..." #: printer/printerdrake.pm:697 #, c-format msgid "and one unknown printer" msgstr "va bitta noma'lum printer" #: printer/printerdrake.pm:699 #, c-format msgid "and %d unknown printers" msgstr "va %d noma'lum printer" #: printer/printerdrake.pm:703 #, c-format msgid "" "The following printers\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "" "Quyidagi printerlar\n" "\n" "%s%s\n" "kompyuterga to'g'ridan-to'g'ri ulangan" #: printer/printerdrake.pm:705 #, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "" "Quyidagi printer\n" "\n" "%s%s\n" "kompyuterga to'g'ridan-to'g'ri ulangan" #: printer/printerdrake.pm:706 #, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "is directly connected to your system" msgstr "" "Quyidagi printer\n" "\n" "%s%s\n" "kompyuterga to'g'ridan-to'g'ri ulangan" #: printer/printerdrake.pm:710 #, c-format msgid "" "\n" "There is one unknown printer directly connected to your system" msgstr "" "\n" "Tizimga bitta noma'lum printer to'g'ridan-to'g'ri ulangan" #: printer/printerdrake.pm:711 #, c-format msgid "" "\n" "There are %d unknown printers directly connected to your system" msgstr "" "\n" "Tizimga %d noma'lum printer to'g'ridan-to'g'ri ulangan" #: printer/printerdrake.pm:714 #, c-format msgid "" "There are no printers found which are directly connected to your machine" msgstr "Sizning kompyuteringizga to'g'ridan-to'g'ri ulangan printer topilmadi" #: printer/printerdrake.pm:717 #, c-format msgid " (Make sure that all your printers are connected and turned on).\n" msgstr "" " (Hamma printerlar ulanganligiga va yoqilganligiga ishonch hosil qiling).\n" #: printer/printerdrake.pm:730 #, c-format msgid "" "Do you want to enable printing on the printers mentioned above or on " "printers in the local network?\n" msgstr "" #: printer/printerdrake.pm:731 #, c-format msgid "Do you want to enable printing on printers in the local network?\n" msgstr "" #: printer/printerdrake.pm:733 #, c-format msgid "Do you want to enable printing on the printers mentioned above?\n" msgstr "" #: printer/printerdrake.pm:734 #, c-format msgid "Are you sure that you want to set up printing on this machine?\n" msgstr "" "Bu kompyuterga bosib chiqarish imkoniyatini o'rnatishga ishonchingiz " "komilmi?\n" #: printer/printerdrake.pm:735 #, c-format msgid "" "NOTE: Depending on the printer model and the printing system up to %d MB of " "additional software will be installed." msgstr "" "IZOH: Printerning modeliga va bosib chiqarish tizimiga bog'liq ravishda " "hajmi to %d Mb bo'lgan qo'shimcha dasturlar o'rnatiladi." #: printer/printerdrake.pm:774 #, c-format msgid "Searching for new printers..." msgstr "Yangi printerlar qidirilmoqda..." #: printer/printerdrake.pm:833 #, c-format msgid "Found printer on %s..." msgstr "Printer \"%s\"da topildi..." #: printer/printerdrake.pm:858 #, c-format msgid "(" msgstr "(" #: printer/printerdrake.pm:859 #, c-format msgid " on " msgstr " da " #: printer/printerdrake.pm:860 standalone/scannerdrake:137 #, c-format msgid ")" msgstr ")" #: printer/printerdrake.pm:865 printer/printerdrake.pm:2960 #, c-format msgid "Printer model selection" msgstr "Printerning modelini tanlash" #: printer/printerdrake.pm:866 printer/printerdrake.pm:2961 #, c-format msgid "Which printer model do you have?" msgstr "Sizning printeringizning modeli?" #: printer/printerdrake.pm:867 #, c-format msgid "" "\n" "\n" "Printerdrake could not determine which model your printer %s is. Please " "choose the correct model from the list." msgstr "" "\n" "\n" "Printerdrake %s printeringizning modelini aniqlolmadi. Iltimos, quyidagi " "ro'yxatdan to'g'ri keladigan modelni tanlang." #: printer/printerdrake.pm:870 printer/printerdrake.pm:2966 #, c-format msgid "" "If your printer is not listed, choose a compatible (see printer manual) or a " "similar one." msgstr "" "Agar siznig printeringiz ro'yxatda bo'lmasa, unga mos keladigan (printerning " "ko'llanmasiga qarang) yoki unga o'xshash printerni tanlang." #: printer/printerdrake.pm:875 #, fuzzy, c-format msgid "Configuring printer on %s..." msgstr "Printer (\"%s\") moslanmoqda..." #: printer/printerdrake.pm:885 printer/printerdrake.pm:4563 #, c-format msgid "Configuring printer \"%s\"..." msgstr "Printer (\"%s\") moslanmoqda..." #: printer/printerdrake.pm:1051 printer/printerdrake.pm:1063 #: printer/printerdrake.pm:1170 printer/printerdrake.pm:2191 #: printer/printerdrake.pm:2206 printer/printerdrake.pm:2276 #: printer/printerdrake.pm:4803 printer/printerdrake.pm:4973 #, c-format msgid "Add a new printer" msgstr "Yangi printerni qo'shish" #: printer/printerdrake.pm:1052 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard allows you to install local or remote printers to be used from " "this machine and also from other machines in the network.\n" "\n" "It asks you for all necessary information to set up the printer and gives " "you access to all available printer drivers, driver options, and printer " "connection types." msgstr "" #: printer/printerdrake.pm:1065 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer, connected directly to the network or to a remote Windows machine.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/" "they can be auto-detected. Also your network printer(s) and your Windows " "machines must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network and/or Windows-hosted printers when you do not " "need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "Printerni o'rnatish yordamchisiga marhamat!\n" "\n" "Yordamchi shu kompyuterga ulangan yoki to'g'ridan-to'g'ri tarmoqqa yoki " "masofadagi Windows kompyuteriga ulangan printer(lar)ingizni o'rnatishda " "sizga yordam beradi.\n" "\n" "Agar shu kompyuterga ulangan printer(lar)ingiz bo'lsa, uni/ularni avtomatik " "ravishda aniqlash uchun uni/ularni yoqilgan holatga keltiring. Tarmoqqa " "ulangan printer(lar)ingiz va Windows kompyuterlar ham yoqilgan holatda " "bo'lishi kerak.\n" "\n" "E'tibor bering, tarmoqqa ulangan printerlarni avtomatik ravishda aniqlash " "shu kompyuterga ulangan printerlarni aniqlashdan ko'ra ko'proq vaqtni oladi. " "Shuning uchun, agar bu sizga kerak bo'lmasa, tarmoqqa ulangan printerlarni " "va/yoki Windows kompyuteriga ulangan printerlarni avtomatik ravishda " "aniqlashni o'chiring.\n" "\n" " Tayyor bo'lganingizdan so'ng \"Keyingi\"ni yoki printer(lar)ingizni " "o'rnatishni istamasangiz \"Bekor qilish\"ni bosing." #: printer/printerdrake.pm:1074 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/" "they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "Printerni o'rnatish yordamchisiga marhamat!\n" "\n" "Yordamchi shu kompyuterga ulangan printer(lar)ingizni o'rnatishda sizga " "yordam beradi.\n" "\n" "Shu kompyuterga ulangan printer(lar)ingizni avtomatik ravishda aniqlash " "uchun uni/ularni yoqilgan holatga keltiring.\n" "\n" " Tayyor bo'lganingizdan so'ng \"Keyingi\"ni yoki printer(lar)ingizni " "o'rnatishni istamasangiz \"Bekor qilish\"ni bosing." #: printer/printerdrake.pm:1082 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer or connected directly to the network.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network printers when you do not need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "Printerni o'rnatish yordamchisiga marhamat!\n" "\n" "Yordamchi shu kompyuterga yoki to'g'ridan-to'g'ri tarmoqqa ulangan printer" "(lar)ingizni o'rnatishda sizga yordam beradi.\n" "\n" "Agar shu kompyuterga ulangan printer(lar)ingiz bo'lsa, uni/ularni avtomatik " "ravishda aniqlash uchun uni/ularni yoqilgan holatga keltiring. Tarmoqqa " "ulangan printer(lar)ingiz ham yoqilgan holatda bo'lishi kerak.\n" "\n" "E'tibor bering, tarmoqqa ulangan printerlarni avtomatik ravishda aniqlash " "shu kompyuterga ulangan printerlarni aniqlashdan ko'ra ko'proq vaqtni oladi. " "Shuning uchun, agar bu sizga kerak bo'lmasa, tarmoqqa ulangan printerlarni " "avtomatik ravishda aniqlashni o'chiring.\n" "\n" " Tayyor bo'lganingizdan so'ng \"Keyingi\"ni yoki printer(lar)ingizni " "o'rnatishni istamasangiz \"Bekor qilish\"ni bosing." #: printer/printerdrake.pm:1091 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "Printerni o'rnatish yordamchisiga marhamat!\n" "\n" "Yordamchi shu kompyuterga ulangan printer(lar)ingizni o'rnatishda sizga " "yordam beradi.\n" "\n" "Agar shu kompyuterga ulangan printer(lar)ingiz bo'lsa, uni/ularni avtomatik " "ravishda aniqlash uchun uni/ularni yoqilgan holatga keltiring.\n" "\n" " Tayyor bo'lganingizdan so'ng \"Keyingi\"ni yoki printer(lar)ingizni " "o'rnatishni istamasangiz \"Bekor qilish\"ni bosing." #: printer/printerdrake.pm:1142 #, c-format msgid "Auto-detect printers connected to this machine" msgstr "Bu kompyuterga ulangan printerlarni avtomatik ravishda aniqlash" #: printer/printerdrake.pm:1145 #, c-format msgid "Auto-detect printers connected directly to the local network" msgstr "Lokal tarmoqqa ulangan printerlarni avtomatik ravishda aniqlash" #: printer/printerdrake.pm:1148 #, c-format msgid "Auto-detect printers connected to machines running Microsoft Windows" msgstr "" "Microsoft Windows boshqarayotgan kompyuterlarga ulangan avto-aniqlangan " "printerlar" #: printer/printerdrake.pm:1151 #, fuzzy, c-format msgid "No auto-detection" msgstr "Avto-aniqlash" #: printer/printerdrake.pm:1171 #, c-format msgid "" "\n" "Congratulations, your printer is now installed and configured!\n" "\n" "You can print using the \"Print\" command of your application (usually in " "the \"File\" menu).\n" "\n" "If you want to add, remove, or rename a printer, or if you want to change " "the default option settings (paper input tray, printout quality, ...), " "select \"Printer\" in the \"Hardware\" section of the %s Control Center." msgstr "" #: printer/printerdrake.pm:1207 printer/printerdrake.pm:1437 #: printer/printerdrake.pm:1500 printer/printerdrake.pm:1592 #: printer/printerdrake.pm:1730 printer/printerdrake.pm:1806 #: printer/printerdrake.pm:1968 printer/printerdrake.pm:2061 #: printer/printerdrake.pm:2070 printer/printerdrake.pm:2079 #: printer/printerdrake.pm:2090 printer/printerdrake.pm:2231 #: printer/printerdrake.pm:2317 printer/printerdrake.pm:2363 #: printer/printerdrake.pm:2430 printer/printerdrake.pm:2465 #, c-format msgid "Could not install the %s packages!" msgstr "%s paketlarini o'rnatib bo'lmadi!" #: printer/printerdrake.pm:1209 #, c-format msgid "Skipping Windows/SMB server auto-detection" msgstr "" #: printer/printerdrake.pm:1215 printer/printerdrake.pm:1360 #: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855 #, c-format msgid "Printer auto-detection" msgstr "Printerni avto-aniqlash" #: printer/printerdrake.pm:1215 #, c-format msgid "Detecting devices..." msgstr "Uskunalar aniqlanilmoqda..." #: printer/printerdrake.pm:1245 #, c-format msgid ", network printer \"%s\", port %s" msgstr ", tarmoqdagi printer \"%s\", port %s" #: printer/printerdrake.pm:1248 #, c-format msgid ", printer \"%s\" on SMB/Windows server \"%s\"" msgstr ", \"%s\" printer \"%s\" SMB/Windows serverida" #: printer/printerdrake.pm:1252 #, c-format msgid "Detected %s" msgstr "%s aniqlandi" #: printer/printerdrake.pm:1257 printer/printerdrake.pm:1284 #: printer/printerdrake.pm:1302 #, c-format msgid "Printer on parallel port #%s" msgstr "\\#%s parallel portidagi printer" #: printer/printerdrake.pm:1263 #, c-format msgid "Network printer \"%s\", port %s" msgstr "Tarmoqdagi printer \"%s\", port %s" #: printer/printerdrake.pm:1266 #, c-format msgid "Printer \"%s\" on SMB/Windows server \"%s\"" msgstr "\"%s\" printer \"%s\" SMB/Windows serverida" #: printer/printerdrake.pm:1347 #, c-format msgid "Local Printer" msgstr "Lokal printer" #: printer/printerdrake.pm:1348 #, c-format msgid "" "No local printer found! To manually install a printer enter a device name/" "file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " "equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB " "printer: /dev/usb/lp1, ...)." msgstr "" #: printer/printerdrake.pm:1352 #, c-format msgid "You must enter a device or file name!" msgstr "Uskunaning yoki faylning nomini kiritishingiz shart!" #: printer/printerdrake.pm:1361 #, c-format msgid "No printer found!" msgstr "Hech qanday printer topilmadi!" #: printer/printerdrake.pm:1369 #, c-format msgid "Local Printers" msgstr "Lokal printerlar" #: printer/printerdrake.pm:1370 #, c-format msgid "Available printers" msgstr "Mavjud bo'lgan printerlar" #: printer/printerdrake.pm:1374 printer/printerdrake.pm:1383 #, c-format msgid "The following printer was auto-detected. " msgstr "Quyidagi printer avtomatik ravishda aniqlandi. " #: printer/printerdrake.pm:1376 #, c-format msgid "" "If it is not the one you want to configure, enter a device name/file name in " "the input line" msgstr "" "Agar bu siz moslamoqchi bo'lgan printer bo'lmasa, uskunaning/faylning nomini " "kiriting." #: printer/printerdrake.pm:1377 #, c-format msgid "" "Alternatively, you can specify a device name/file name in the input line" msgstr "Istasangiz, uskunaning/faylning nomini ko'rsatishingiz mumkin." #: printer/printerdrake.pm:1378 printer/printerdrake.pm:1387 #, c-format msgid "Here is a list of all auto-detected printers. " msgstr "Avto-aniqlangan printerlarning ro'yxati. " #: printer/printerdrake.pm:1380 #, c-format msgid "" "Please choose the printer you want to set up or enter a device name/file " "name in the input line" msgstr "" "Siz o'rnatmoqchi bo'lgan printerning yoki uskunaning/faylning nomini " "kiriting." #: printer/printerdrake.pm:1381 #, c-format msgid "" "Please choose the printer to which the print jobs should go or enter a " "device name/file name in the input line" msgstr "" "Iltimos bosib chiqarish vazifalari jo'natiladigan printerni tanlang yoki " "uskunaning/faylning nomini kiriting." #: printer/printerdrake.pm:1385 #, c-format msgid "" "The configuration of the printer will work fully automatically. If your " "printer was not correctly detected or if you prefer a customized printer " "configuration, turn on \"Manual configuration\"." msgstr "" #: printer/printerdrake.pm:1386 #, c-format msgid "Currently, no alternative possibility is available" msgstr "" #: printer/printerdrake.pm:1389 #, c-format msgid "" "Please choose the printer you want to set up. The configuration of the " "printer will work fully automatically. If your printer was not correctly " "detected or if you prefer a customized printer configuration, turn on " "\"Manual configuration\"." msgstr "" #: printer/printerdrake.pm:1390 #, c-format msgid "Please choose the printer to which the print jobs should go." msgstr "Iltimos bosib chiqarish vazifalari jo'natiladigan printerni tanlang." #: printer/printerdrake.pm:1392 #, c-format msgid "" "Please choose the port that your printer is connected to or enter a device " "name/file name in the input line" msgstr "" "Iltimos printeringiz ulangan portni tanlang yoki uskunanig/faylning nomini " "kiriting." #: printer/printerdrake.pm:1393 #, c-format msgid "Please choose the port that your printer is connected to." msgstr "Iltimos printeringiz ulangan portni tanlang." #: printer/printerdrake.pm:1395 #, c-format msgid "" " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " "1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" " (Parallel portlar: /dev/lp0, /dev/lp1, ..., LPT1:, LPT2:, ... ga teng, 1-" "chi USB printer: /dev/usb/lp0, 2-chi USB printer: /dev/usb/lp1, ...)." #: printer/printerdrake.pm:1399 #, c-format msgid "You must choose/enter a printer/device!" msgstr "Printer yoki uskunani tanlashingiz yoki kiritishingiz shart!" #: printer/printerdrake.pm:1439 printer/printerdrake.pm:1502 #: printer/printerdrake.pm:1594 printer/printerdrake.pm:1732 #: printer/printerdrake.pm:1808 printer/printerdrake.pm:1970 #: printer/printerdrake.pm:2063 printer/printerdrake.pm:2072 #: printer/printerdrake.pm:2081 printer/printerdrake.pm:2092 #, c-format msgid "Aborting" msgstr "To'xtatilmoqda" #: printer/printerdrake.pm:1475 #, c-format msgid "Remote lpd Printer Options" msgstr "Masofadagi LPD printerning parametrlari" #: printer/printerdrake.pm:1476 #, c-format msgid "" "To use a remote lpd printer, you need to supply the hostname of the printer " "server and the printer name on that server." msgstr "" "Masofadagi LPD printeridan foydalanish uchun printer o'rnatilgan " "kompyuterning nomini va printerning nomini ko'rsatishingiz kerak." #: printer/printerdrake.pm:1477 #, c-format msgid "Remote host name" msgstr "Masofadagi xostning nomi" #: printer/printerdrake.pm:1478 #, c-format msgid "Remote printer name" msgstr "Masofadagi printerning nomi" #: printer/printerdrake.pm:1481 #, c-format msgid "Remote host name missing!" msgstr "Masofadagi xostning nomi aniqlanmagan!" #: printer/printerdrake.pm:1485 #, c-format msgid "Remote printer name missing!" msgstr "Masofadagi printerning nomi aniqlanmagan!" #: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986 #: printer/printerdrake.pm:2111 standalone/drakTermServ:446 #: standalone/drakTermServ:766 standalone/drakTermServ:782 #: standalone/drakTermServ:1554 standalone/drakTermServ:1563 #: standalone/drakTermServ:1575 standalone/drakbackup:499 #: standalone/drakbackup:605 standalone/drakbackup:640 #: standalone/drakbackup:741 standalone/drakroam:390 standalone/harddrake2:258 #, c-format msgid "Information" msgstr "Ma'lumot" #: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986 #: printer/printerdrake.pm:2111 #, c-format msgid "Detected model: %s %s" msgstr "Aniqlangan model: %s %s" #: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855 #, c-format msgid "Scanning network..." msgstr "Tarmoq qidirilmoqda..." #: printer/printerdrake.pm:1610 printer/printerdrake.pm:1631 #, c-format msgid ", printer \"%s\" on server \"%s\"" msgstr ", \"%s\" printer \"%s\" serverda" #: printer/printerdrake.pm:1613 printer/printerdrake.pm:1634 #, c-format msgid "Printer \"%s\" on server \"%s\"" msgstr "\"%s\" printer \"%s\" serverda" #: printer/printerdrake.pm:1655 #, c-format msgid "SMB (Windows 9x/NT) Printer Options" msgstr "SMB (Windows 9x/NT) printerning parametrlari" #: printer/printerdrake.pm:1656 #, c-format msgid "" "To print to a SMB printer, you need to provide the SMB host name (Note! It " "may be different from its TCP/IP hostname!) and possibly the IP address of " "the print server, as well as the share name for the printer you wish to " "access and any applicable user name, password, and workgroup information." msgstr "" #: printer/printerdrake.pm:1657 #, c-format msgid "" " If the desired printer was auto-detected, simply choose it from the list " "and then add user name, password, and/or workgroup if needed." msgstr "" "Agar siz istagan printer avtomatik ravishda aniqlangan bo'lsa, uni " "ro'yxatdan tanlang va foydalanuvchini, maxfiy so'zni va kerak bo'lsa ishchi " "guruhni ko'rsating." #: printer/printerdrake.pm:1659 #, c-format msgid "SMB server host" msgstr "SMB serverning xosti" #: printer/printerdrake.pm:1660 #, c-format msgid "SMB server IP" msgstr "SMB serverning IP raqami" #: printer/printerdrake.pm:1661 #, c-format msgid "Share name" msgstr "" #: printer/printerdrake.pm:1664 #, c-format msgid "Workgroup" msgstr "Ishchi guruh" #: printer/printerdrake.pm:1666 #, c-format msgid "Auto-detected" msgstr "Avto-aniqlandi" #: printer/printerdrake.pm:1676 #, c-format msgid "Either the server name or the server's IP must be given!" msgstr "Serverning nomi yoki serverning IP raqami kiritilishi shart!" #: printer/printerdrake.pm:1680 #, c-format msgid "Samba share name missing!" msgstr "" #: printer/printerdrake.pm:1686 #, c-format msgid "SECURITY WARNING!" msgstr "XAVFSIZLIK OGOHNOMASI!" #: printer/printerdrake.pm:1687 #, c-format msgid "" "You are about to set up printing to a Windows account with password. Due to " "a fault in the architecture of the Samba client software the password is put " "in clear text into the command line of the Samba client used to transmit the " "print job to the Windows server. So it is possible for every user on this " "machine to display the password on the screen by issuing commands as \"ps " "auxwww\".\n" "\n" "We recommend to make use of one of the following alternatives (in all cases " "you have to make sure that only machines from your local network have access " "to your Windows server, for example by means of a firewall):\n" "\n" "Use a password-less account on your Windows server, as the \"GUEST\" account " "or a special account dedicated for printing. Do not remove the password " "protection from a personal account or the administrator account.\n" "\n" "Set up your Windows server to make the printer available under the LPD " "protocol. Then set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" #: printer/printerdrake.pm:1697 #, c-format msgid "" "Set up your Windows server to make the printer available under the IPP " "protocol and set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" #: printer/printerdrake.pm:1700 #, c-format msgid "" "Connect your printer to a Linux server and let your Windows machine(s) " "connect to it as a client.\n" "\n" "Do you really want to continue setting up this printer as you are doing now?" msgstr "" #: printer/printerdrake.pm:1779 #, c-format msgid "NetWare Printer Options" msgstr "NetWare printerning parametrlari" #: printer/printerdrake.pm:1780 #, c-format msgid "" "To print on a NetWare printer, you need to provide the NetWare print server " "name (Note! it may be different from its TCP/IP hostname!) as well as the " "print queue name for the printer you wish to access and any applicable user " "name and password." msgstr "" #: printer/printerdrake.pm:1781 #, c-format msgid "Printer Server" msgstr "Bosib chiqarish serveri" #: printer/printerdrake.pm:1782 #, c-format msgid "Print Queue Name" msgstr "Bosib chiqarish navbatining nomi" #: printer/printerdrake.pm:1787 #, c-format msgid "NCP server name missing!" msgstr "NCP serverining nomi aniqlanmagan!" #: printer/printerdrake.pm:1791 #, c-format msgid "NCP queue name missing!" msgstr "NCP navbatning nomi aniqlanmagan!" #: printer/printerdrake.pm:1867 printer/printerdrake.pm:1888 #, c-format msgid ", host \"%s\", port %s" msgstr ", xost \"%s\", port %s" #: printer/printerdrake.pm:1870 printer/printerdrake.pm:1891 #, c-format msgid "Host \"%s\", port %s" msgstr "Xost \"%s\", port %s" #: printer/printerdrake.pm:1913 #, c-format msgid "TCP/Socket Printer Options" msgstr "TCP/Socket printerning parametrlari" #: printer/printerdrake.pm:1915 #, c-format msgid "" "Choose one of the auto-detected printers from the list or enter the hostname " "or IP and the optional port number (default is 9100) in the input fields." msgstr "" "Avtomatik ravishda aniqlangan printerlar ro'yxatidan bittasini tanlang yoki " "printerning xost nomini yoki IP raqamini va istasangiz port raqamini (andoza " "- 9100) kiriting." #: printer/printerdrake.pm:1916 #, c-format msgid "" "To print to a TCP or socket printer, you need to provide the host name or IP " "of the printer and optionally the port number (default is 9100). On HP " "JetDirect servers the port number is usually 9100, on other servers it can " "vary. See the manual of your hardware." msgstr "" "TCP yoki socket printerlari yordamida bosib chiqarish uchun printerning xost " "nomini yoki IP raqamini va istasangiz portning raqamini (andoza - 9100) " "kiritishingiz kerak. HP JetDirect serverlarda odatda portning raqami 9100, " "boshqa serverlarda boshqacha bo'lishi mumkin. Asbobingizning qo'llanmasiga " "qarang." #: printer/printerdrake.pm:1920 #, c-format msgid "Printer host name or IP missing!" msgstr "Kompyuterning nomi yoki IP raqami aniqlanmagan!" #: printer/printerdrake.pm:1949 #, c-format msgid "Printer host name or IP" msgstr "Kompyuterning nomi yoki IP raqami" #: printer/printerdrake.pm:2012 #, c-format msgid "Refreshing Device URI list..." msgstr "" #: printer/printerdrake.pm:2015 printer/printerdrake.pm:2017 #, c-format msgid "Printer Device URI" msgstr "Printer uskunasining URI'i" #: printer/printerdrake.pm:2016 #, c-format msgid "" "You can specify directly the URI to access the printer. The URI must fulfill " "either the CUPS or the Foomatic specifications. Note that not all URI types " "are supported by all the spoolers." msgstr "" #: printer/printerdrake.pm:2042 #, c-format msgid "A valid URI must be entered!" msgstr "Haqiqiy URI kiritilishi kerak!" #: printer/printerdrake.pm:2147 #, c-format msgid "Pipe into command" msgstr "Buyrug'ga ulash" #: printer/printerdrake.pm:2148 #, c-format msgid "" "Here you can specify any arbitrary command line into which the job should be " "piped instead of being sent directly to a printer." msgstr "" "Vazifani printerga to'g'ridan-to'g'ri jo'natishni o'rniga uni istagan " "buyrug'ga ulash (pipe) mumkin. Bu erda o'sha buyrug'ni kiritishingiz mumkin." #: printer/printerdrake.pm:2149 #, c-format msgid "Command line" msgstr "Buyruq" #: printer/printerdrake.pm:2153 #, c-format msgid "A command line must be entered!" msgstr "Buyruq kiritishi kerak!" #: printer/printerdrake.pm:2192 #, c-format msgid "" "On many HP printers there are special functions available, maintenance (ink " "level checking, nozzle cleaning. head alignment, ...) on all not too old " "inkjets, scanning on multi-function devices, and memory card access on " "printers with card readers. " msgstr "" #: printer/printerdrake.pm:2194 #, c-format msgid "" "To access these extra functions on your HP printer, it must be set up with " "the appropriate software: " msgstr "" #: printer/printerdrake.pm:2195 #, c-format msgid "" "Either with the newer HPLIP which allows printer maintenance through the " "easy-to-use graphical application \"Toolbox\" and four-edge full-bleed on " "newer PhotoSmart models " msgstr "" #: printer/printerdrake.pm:2196 #, c-format msgid "" "or with the older HPOJ which allows only scanner and memory card access, but " "could help you in case of failure of HPLIP. " msgstr "" #: printer/printerdrake.pm:2198 #, c-format msgid "What is your choice (choose \"None\" for non-HP printers)? " msgstr "" #: printer/printerdrake.pm:2199 printer/printerdrake.pm:2200 #: printer/printerdrake.pm:2226 printer/printerdrake.pm:2232 #: printer/printerdrake.pm:2258 #, c-format msgid "HPLIP" msgstr "" #: printer/printerdrake.pm:2199 printer/printerdrake.pm:2202 #: printer/printerdrake.pm:2358 printer/printerdrake.pm:2364 #: printer/printerdrake.pm:2375 #, c-format msgid "HPOJ" msgstr "" #: printer/printerdrake.pm:2207 #, c-format msgid "" "Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, " "LaserJet 1100/1200/1220/3000/3200/3300/4345 with scanner, DeskJet 450, Sony " "IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?" msgstr "" "Sizning printeringiz HP yoki Sony (OfficeJet, PSC, LaserJet " "1100/1200/1220/3000/3200/3300/4345 skanner bilan, DeskJet 450, Sony IJP-" "V100), HP PhotoSmart yoki HP LaserJet 2200 ko'p amalli uskunami?" #: printer/printerdrake.pm:2226 printer/printerdrake.pm:2358 #, c-format msgid "Installing %s package..." msgstr "%s paketlari o'rnatilmoqda..." #: printer/printerdrake.pm:2233 printer/printerdrake.pm:2365 #, c-format msgid "Only printing will be possible on the %s." msgstr "" #: printer/printerdrake.pm:2248 #, c-format msgid "Could not remove your old HPOJ configuration file %s for your %s! " msgstr "" #: printer/printerdrake.pm:2250 #, c-format msgid "Please remove the file manually and restart HPOJ." msgstr "" #: printer/printerdrake.pm:2258 printer/printerdrake.pm:2375 #, c-format msgid "Checking device and configuring %s..." msgstr "Uskuna tekshirilmoqda va %s moslanmoqda..." #: printer/printerdrake.pm:2277 #, fuzzy, c-format msgid "Which printer do you want to set up with HPLIP?" msgstr "Buni qaysi sektorga ko'chirmoqchisiz?" #: printer/printerdrake.pm:2306 printer/printerdrake.pm:2419 #, c-format msgid "Installing SANE packages..." msgstr "SANE paketlari o'rnatilmoqda..." #: printer/printerdrake.pm:2319 printer/printerdrake.pm:2432 #, c-format msgid "Scanning on the %s will not be possible." msgstr "" #: printer/printerdrake.pm:2334 #, c-format msgid "Using and Maintaining your %s" msgstr "" #: printer/printerdrake.pm:2459 #, c-format msgid "Installing mtools packages..." msgstr "mtools paketlari o'rnatilmoqda..." #: printer/printerdrake.pm:2467 #, c-format msgid "Photo memory card access on the %s will not be possible." msgstr "" #: printer/printerdrake.pm:2483 #, c-format msgid "Scanning on your HP multi-function device" msgstr "" #: printer/printerdrake.pm:2492 #, c-format msgid "Photo memory card access on your HP multi-function device" msgstr "" #: printer/printerdrake.pm:2509 #, fuzzy, c-format msgid "Configuring device..." msgstr "Moslanmoqda..." #: printer/printerdrake.pm:2543 #, c-format msgid "Making printer port available for CUPS..." msgstr "Printerning porti CUPS bilan ishlaydigan qilinmoqda..." #: printer/printerdrake.pm:2552 printer/printerdrake.pm:2805 #: printer/printerdrake.pm:2949 #, c-format msgid "Reading printer database..." msgstr "Printer ma'lumot bazasi o'qilmoqda..." #: printer/printerdrake.pm:2763 #, c-format msgid "Enter Printer Name and Comments" msgstr "Printerning nomini va izohni kiriting" #: printer/printerdrake.pm:2767 printer/printerdrake.pm:4064 #, c-format msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "" "Printerning nomi faqat harf, son va tagidan chizish belgisidan iborat " "bo'lishi kerak" #: printer/printerdrake.pm:2773 printer/printerdrake.pm:4069 #, c-format msgid "" "The printer \"%s\" already exists,\n" "do you really want to overwrite its configuration?" msgstr "" "Printer \"%s\" allaqachon mavjud.\n" "Uning moslamalarini almashtirishni rostdan istaysizmi?" #: printer/printerdrake.pm:2780 #, c-format msgid "" "The printer name \"%s\" has more than 12 characters which can make the " "printer unaccessible from Windows clients. Do you really want to use this " "name?" msgstr "" #: printer/printerdrake.pm:2789 #, c-format msgid "" "Every printer needs a name (for example \"printer\"). The Description and " "Location fields do not need to be filled in. They are comments for the users." msgstr "" "Har qanday printerning nomi bo'lishi shart (m-n \"printer\"). \"Ta'rifi\" va " "\"Manzili\" maydonlarni to'ldirish shart emas. Ular foydalanuvchilar uchun " "izoh sifatida ishlatiladi." #: printer/printerdrake.pm:2790 #, c-format msgid "Name of printer" msgstr "Printerning nomi" #: printer/printerdrake.pm:2791 standalone/drakconnect:592 #: standalone/harddrake2:39 standalone/printerdrake:211 #: standalone/printerdrake:218 #, c-format msgid "Description" msgstr "Ta'rifi" #: printer/printerdrake.pm:2792 standalone/printerdrake:211 #: standalone/printerdrake:218 #, c-format msgid "Location" msgstr "Manzili" #: printer/printerdrake.pm:2810 #, c-format msgid "Preparing printer database..." msgstr "Printer ma'lumot bazasi tayyorlanmoqda..." #: printer/printerdrake.pm:2927 #, c-format msgid "Your printer model" msgstr "Sizning printeringizning modeli" #: printer/printerdrake.pm:2928 #, c-format msgid "" "Printerdrake has compared the model name resulting from the printer auto-" "detection with the models listed in its printer database to find the best " "match. This choice can be wrong, especially when your printer is not listed " "at all in the database. So check whether the choice is correct and click " "\"The model is correct\" if so and if not, click \"Select model manually\" " "so that you can choose your printer model manually on the next screen.\n" "\n" "For your printer Printerdrake has found:\n" "\n" "%s" msgstr "" #: printer/printerdrake.pm:2933 printer/printerdrake.pm:2936 #, c-format msgid "The model is correct" msgstr "To'g'ri model" #: printer/printerdrake.pm:2934 printer/printerdrake.pm:2935 #: printer/printerdrake.pm:2938 #, c-format msgid "Select model manually" msgstr "Modelni o'zingiz tanlang" #: printer/printerdrake.pm:2962 #, c-format msgid "" "\n" "\n" "Please check whether Printerdrake did the auto-detection of your printer " "model correctly. Find the correct model in the list when a wrong model or " "\"Raw printer\" is highlighted." msgstr "" #: printer/printerdrake.pm:2981 #, c-format msgid "Install a manufacturer-supplied PPD file" msgstr "" #: printer/printerdrake.pm:3013 #, c-format msgid "" "Every PostScript printer is delivered with a PPD file which describes the " "printer's options and features." msgstr "" #: printer/printerdrake.pm:3014 #, c-format msgid "" "This file is usually somewhere on the CD with the Windows and Mac drivers " "delivered with the printer." msgstr "" #: printer/printerdrake.pm:3015 #, c-format msgid "You can find the PPD files also on the manufacturer's web sites." msgstr "" #: printer/printerdrake.pm:3016 #, c-format msgid "" "If you have Windows installed on your machine, you can find the PPD file on " "your Windows partition, too." msgstr "" #: printer/printerdrake.pm:3017 #, c-format msgid "" "Installing the printer's PPD file and using it when setting up the printer " "makes all options of the printer available which are provided by the " "printer's hardware" msgstr "" #: printer/printerdrake.pm:3018 #, c-format msgid "" "Here you can choose the PPD file to be installed on your machine, it will " "then be used for the setup of your printer." msgstr "" #: printer/printerdrake.pm:3020 #, c-format msgid "Install PPD file from" msgstr "" #: printer/printerdrake.pm:3023 printer/printerdrake.pm:3031 #: standalone/scannerdrake:183 standalone/scannerdrake:192 #: standalone/scannerdrake:242 standalone/scannerdrake:250 #, c-format msgid "Floppy Disk" msgstr "Disket" #: printer/printerdrake.pm:3024 printer/printerdrake.pm:3033 #: standalone/scannerdrake:184 standalone/scannerdrake:194 #: standalone/scannerdrake:243 standalone/scannerdrake:252 #, c-format msgid "Other place" msgstr "Boshqa joy" #: printer/printerdrake.pm:3039 #, c-format msgid "Select PPD file" msgstr "PPD-faylini tanlash" #: printer/printerdrake.pm:3043 #, c-format msgid "The PPD file %s does not exist or is unreadable!" msgstr "" #: printer/printerdrake.pm:3049 #, c-format msgid "The PPD file %s does not conform with the PPD specifications!" msgstr "" #: printer/printerdrake.pm:3060 #, c-format msgid "Installing PPD file..." msgstr "PPD-fayli o'rnatilmoqda..." #: printer/printerdrake.pm:3178 #, c-format msgid "OKI winprinter configuration" msgstr "OKI vin-printerni moslash" #: printer/printerdrake.pm:3179 #, c-format msgid "" "You are configuring an OKI laser winprinter. These printers\n" "use a very special communication protocol and therefore they work only when " "connected to the first parallel port. When your printer is connected to " "another port or to a print server box please connect the printer to the " "first parallel port before you print a test page. Otherwise the printer will " "not work. Your connection type setting will be ignored by the driver." msgstr "" #: printer/printerdrake.pm:3204 printer/printerdrake.pm:3234 #, c-format msgid "Lexmark inkjet configuration" msgstr "Lexmark inkjet printerini moslash" #: printer/printerdrake.pm:3205 #, c-format msgid "" "The inkjet printer drivers provided by Lexmark only support local printers, " "no printers on remote machines or print server boxes. Please connect your " "printer to a local port or configure it on the machine where it is connected " "to." msgstr "" #: printer/printerdrake.pm:3235 #, c-format msgid "" "To be able to print with your Lexmark inkjet and this configuration, you " "need the inkjet printer drivers provided by Lexmark (http://www.lexmark." "com/). Click on the \"Drivers\" link. Then choose your model and afterwards " "\"Linux\" as operating system. The drivers come as RPM packages or shell " "scripts with interactive graphical installation. You do not need to do this " "configuration by the graphical frontends. Cancel directly after the license " "agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and " "adjust the head alignment settings with this program." msgstr "" #: printer/printerdrake.pm:3245 #, c-format msgid "Lexmark X125 configuration" msgstr "Lexmark X125 printerini moslash" #: printer/printerdrake.pm:3246 #, c-format msgid "" "The driver for this printer only supports printers locally connected via " "USB, no printers on remote machines or print server boxes. Please connect " "your printer to a local USB port or configure it on the machine where it is " "connected to." msgstr "" #: printer/printerdrake.pm:3268 #, c-format msgid "Samsung ML/QL-85G configuration" msgstr "Samsung ML/QL-85G moslamasi" #: printer/printerdrake.pm:3269 printer/printerdrake.pm:3296 #, c-format msgid "" "The driver for this printer only supports printers locally connected on the " "first parallel port, no printers on remote machines or print server boxes or " "on other parallel ports. Please connect your printer to the first parallel " "port or configure it on the machine where it is connected to." msgstr "" #: printer/printerdrake.pm:3295 #, c-format msgid "Canon LBP-460/660 configuration" msgstr "Canon LBP-460/660 moslamasi" #: printer/printerdrake.pm:3314 #, c-format msgid "Firmware-Upload for HP LaserJet 1000" msgstr "" #: printer/printerdrake.pm:3464 #, c-format msgid "" "Printer default settings\n" "\n" "You should make sure that the page size and the ink type/printing mode (if " "available) and also the hardware configuration of laser printers (memory, " "duplex unit, extra trays) are set correctly. Note that with a very high " "printout quality/resolution printing can get substantially slower." msgstr "" #: printer/printerdrake.pm:3589 #, c-format msgid "Printer default settings" msgstr "Printerning andoza moslamalari" #: printer/printerdrake.pm:3596 #, c-format msgid "Option %s must be an integer number!" msgstr "Parametr %s butun son bo'lishi kerak!" #: printer/printerdrake.pm:3600 #, c-format msgid "Option %s must be a number!" msgstr "Parametr %s son bo'lishi kerak!" #: printer/printerdrake.pm:3604 #, c-format msgid "Option %s out of range!" msgstr "Parametr %s chegaradan tashqarida!" #: printer/printerdrake.pm:3656 #, c-format msgid "" "Do you want to set this printer (\"%s\")\n" "as the default printer?" msgstr "" "Bu printerni (\"%s\") andoza deb\n" "belgilashni istaysizmi?" #: printer/printerdrake.pm:3672 #, c-format msgid "Test pages" msgstr "Sinov betlari" #: printer/printerdrake.pm:3673 #, c-format msgid "" "Please select the test pages you want to print.\n" "Note: the photo test page can take a rather long time to get printed and on " "laser printers with too low memory it can even not come out. In most cases " "it is enough to print the standard test page." msgstr "" "Iltimos siz bosib chiqarmoqchi bo'lgan sinov betini tanlang.\n" "Izoh: surat sinov betini bosib chiqarish ancha uzoq vaqt davom etishi mumkin " "va juda kichik hotirali lazer printerlarda umuman chiqmashi mumkin. Ko'p " "hollarda, andoza sinov betini bosib chiqarish kifoya." #: printer/printerdrake.pm:3677 #, c-format msgid "No test pages" msgstr "Sinov beti yo'q" #: printer/printerdrake.pm:3678 #, c-format msgid "Print" msgstr "Bosib chiqarish" #: printer/printerdrake.pm:3703 #, c-format msgid "Standard test page" msgstr "Andoza sinov beti" #: printer/printerdrake.pm:3706 #, c-format msgid "Alternative test page (Letter)" msgstr "Boshqa sinov beti (Xat)" #: printer/printerdrake.pm:3709 #, c-format msgid "Alternative test page (A4)" msgstr "Boshqa sinov beti (A4)" #: printer/printerdrake.pm:3711 #, c-format msgid "Photo test page" msgstr "Surat sinov beti" #: printer/printerdrake.pm:3715 #, c-format msgid "Do not print any test page" msgstr "Sinov betini bosib chiqarmash" #: printer/printerdrake.pm:3723 printer/printerdrake.pm:3907 #, c-format msgid "Printing test page(s)..." msgstr "Sinov bet(lar) bosib chiqarilmoqda..." #: printer/printerdrake.pm:3743 #, c-format msgid "Skipping photo test page." msgstr "" #: printer/printerdrake.pm:3760 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" "Printing status:\n" "%s\n" "\n" msgstr "" "Sinov bet(lar) printerga jo'natildi.\n" "Printer ishini boshlaguncha biroz vaqt o'tishi mumkin.\n" "Bosib chiqarishning holati:\n" "%s\n" "\n" #: printer/printerdrake.pm:3764 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" msgstr "" "Sinov bet(lar) printerga jo'natildi.\n" "Printer ishini boshlaguncha biroz vaqt o'tishi mumkin.\n" #: printer/printerdrake.pm:3774 #, c-format msgid "Did it work properly?" msgstr "To'g'ri ishladimi?" #: printer/printerdrake.pm:3798 printer/printerdrake.pm:5175 #, c-format msgid "Raw printer" msgstr "" #: printer/printerdrake.pm:3836 #, c-format msgid "" "To print a file from the command line (terminal window) you can either use " "the command \"%s \" or a graphical printing tool: \"xpp \" or " "\"kprinter \". The graphical tools allow you to choose the printer and " "to modify the option settings easily.\n" msgstr "" #: printer/printerdrake.pm:3838 #, c-format msgid "" "These commands you can also use in the \"Printing command\" field of the " "printing dialogs of many applications, but here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" #: printer/printerdrake.pm:3841 printer/printerdrake.pm:3858 #: printer/printerdrake.pm:3868 #, c-format msgid "" "\n" "The \"%s\" command also allows to modify the option settings for a " "particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \". " msgstr "" #: printer/printerdrake.pm:3844 printer/printerdrake.pm:3884 #, c-format msgid "" "To know about the options available for the current printer read either the " "list shown below or click on the \"Print option list\" button.%s%s%s\n" "\n" msgstr "" "Joriy printer uchun mavjud bo'lgan parametrlarni bilish uchun quyidagi " "ro'yxatni o'qing yoki \"Parametrlar ro'yxatini ko'rsatish\" tugmasini " "bosing. %s%s%s\n" "\n" #: printer/printerdrake.pm:3848 #, c-format msgid "" "Here is a list of the available printing options for the current printer:\n" "\n" msgstr "" "Joriy printer uchun mavjud bo'lgan parametrlarning ro'yxati:\n" "\n" #: printer/printerdrake.pm:3853 printer/printerdrake.pm:3863 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\".\n" msgstr "" #: printer/printerdrake.pm:3855 printer/printerdrake.pm:3865 #: printer/printerdrake.pm:3875 #, c-format msgid "" "This command you can also use in the \"Printing command\" field of the " "printing dialogs of many applications. But here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" #: printer/printerdrake.pm:3860 printer/printerdrake.pm:3870 #, c-format msgid "" "To get a list of the options available for the current printer click on the " "\"Print option list\" button." msgstr "" "Joriy printer uchun mavjud bo'lgan parametrlarni bilish uchun \"Parametrlar " "ro'yxatini ko'rsatish\" tugmasini bosing." #: printer/printerdrake.pm:3873 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\" or \"%s \".\n" msgstr "" #: printer/printerdrake.pm:3877 #, c-format msgid "" "You can also use the graphical interface \"xpdq\" for setting options and " "handling printing jobs.\n" "If you are using KDE as desktop environment you have a \"panic button\", an " "icon on the desktop, labeled with \"STOP Printer!\", which stops all print " "jobs immediately when you click it. This is for example useful for paper " "jams.\n" msgstr "" #: printer/printerdrake.pm:3881 #, c-format msgid "" "\n" "The \"%s\" and \"%s\" commands also allow to modify the option settings for " "a particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \".\n" msgstr "" #: printer/printerdrake.pm:3891 #, c-format msgid "Printing/Scanning/Photo Cards on \"%s\"" msgstr "" #: printer/printerdrake.pm:3892 #, c-format msgid "Printing/Scanning on \"%s\"" msgstr "\"%s\" yordamida bosib chiqarilmoqda/skan qilinmoqda" #: printer/printerdrake.pm:3894 #, c-format msgid "Printing/Photo Card Access on \"%s\"" msgstr "" #: printer/printerdrake.pm:3896 #, fuzzy, c-format msgid "Using/Maintaining the printer \"%s\"" msgstr "Printer (%s) yordamida bosib chiqarilmoqda..." #: printer/printerdrake.pm:3897 #, c-format msgid "Printing on the printer \"%s\"" msgstr "Printer (%s) yordamida bosib chiqarilmoqda..." #: printer/printerdrake.pm:3903 #, c-format msgid "Print option list" msgstr "Parametrlar ro'yxatini ko'rsatish" #: printer/printerdrake.pm:3925 #, c-format msgid "" "Your %s is set up with HP's HPLIP driver software. This way many special " "features of your printer are supported.\n" "\n" msgstr "" #: printer/printerdrake.pm:3928 #, c-format msgid "" "The scanner in your printer can be used with the usual SANE software, for " "example Kooka or XSane (Both in the Multimedia/Graphics menu). " msgstr "" #: printer/printerdrake.pm:3929 #, c-format msgid "" "Run Scannerdrake (Hardware/Scanner in Mandriva Linux Control Center) to " "share your scanner on the network.\n" "\n" msgstr "" #: printer/printerdrake.pm:3933 #, c-format msgid "" "The memory card readers in your printer can be accessed like a usual USB " "mass storage device. " msgstr "" #: printer/printerdrake.pm:3934 #, c-format msgid "" "After inserting a card a hard disk icon to access the card should appear on " "your desktop.\n" "\n" msgstr "" #: printer/printerdrake.pm:3936 #, c-format msgid "" "The memory card readers in your printer can be accessed using HP's Printer " "Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access " "Photo Cards...\" button on the \"Functions\" tab. " msgstr "" #: printer/printerdrake.pm:3937 #, c-format msgid "" "Note that this is very slow, reading the pictures from the camera or a USB " "card reader is usually faster.\n" "\n" msgstr "" #: printer/printerdrake.pm:3940 #, c-format msgid "" "HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a " "lot of status monitoring and maintenance functions for your %s:\n" "\n" msgstr "" #: printer/printerdrake.pm:3941 #, c-format msgid " - Ink level/status info\n" msgstr "" #: printer/printerdrake.pm:3942 #, c-format msgid " - Ink nozzle cleaning\n" msgstr "" #: printer/printerdrake.pm:3943 #, fuzzy, c-format msgid " - Print head alignment\n" msgstr "Printer boshqaruvi\n" #: printer/printerdrake.pm:3944 #, fuzzy, c-format msgid " - Color calibration\n" msgstr "Rangni moslash" #: printer/printerdrake.pm:3959 #, c-format msgid "" "Your multi-function device was configured automatically to be able to scan. " "Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the " "scanner when you have more than one) from the command line or with the " "graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, " "you can also scan by choosing the appropriate point in the \"File\"/\"Acquire" "\" menu. Call also \"man scanimage\" on the command line to get more " "information.\n" "\n" "You do not need to run \"scannerdrake\" for setting up scanning on this " "device, you only need to use \"scannerdrake\" if you want to share the " "scanner on the network." msgstr "" #: printer/printerdrake.pm:3985 #, c-format msgid "" "Your printer was configured automatically to give you access to the photo " "card drives from your PC. Now you can access your photo cards using the " "graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> " "\"MTools File Manager\") or the command line utilities \"mtools\" (enter " "\"man mtools\" on the command line for more info). You find the card's file " "system under the drive letter \"p:\", or subsequent drive letters when you " "have more than one HP printer with photo card drives. In \"MtoolsFM\" you " "can switch between drive letters with the field at the upper-right corners " "of the file lists." msgstr "" #: printer/printerdrake.pm:4028 printer/printerdrake.pm:4055 #: printer/printerdrake.pm:4090 #, c-format msgid "Transfer printer configuration" msgstr "Printerning moslamalarini uzatish" #: printer/printerdrake.pm:4029 #, c-format msgid "" "You can copy the printer configuration which you have done for the spooler %" "s to %s, your current spooler. All the configuration data (printer name, " "description, location, connection type, and default option settings) is " "overtaken, but jobs will not be transferred.\n" "Not all queues can be transferred due to the following reasons:\n" msgstr "" #: printer/printerdrake.pm:4032 #, c-format msgid "" "CUPS does not support printers on Novell servers or printers sending the " "data into a free-formed command.\n" msgstr "" #: printer/printerdrake.pm:4034 #, c-format msgid "" "PDQ only supports local printers, remote LPD printers, and Socket/TCP " "printers.\n" msgstr "" "PDQ bilan faqat lokal printerlarni, masofadagi LPD printerlarni va Socket/" "TCP printerlarni ishlatib bo'ladi.\n" #: printer/printerdrake.pm:4036 #, c-format msgid "LPD and LPRng do not support IPP printers.\n" msgstr "LPD va LPRng bilan IPP printerlarni ishlatib bo'lmaydi.\n" #: printer/printerdrake.pm:4038 #, c-format msgid "" "In addition, queues not created with this program or \"foomatic-configure\" " "cannot be transferred." msgstr "" #: printer/printerdrake.pm:4039 #, c-format msgid "" "\n" "Also printers configured with the PPD files provided by their manufacturers " "or with native CUPS drivers cannot be transferred." msgstr "" "\n" "Ishlab chiqaruvchining PPD-fayllari yoki CUPS'ning asl drayverlari bilan " "moslangan printerlarni ham uzatib bo'lmaydi." #: printer/printerdrake.pm:4040 #, c-format msgid "" "\n" "Mark the printers which you want to transfer and click \n" "\"Transfer\"." msgstr "" "\n" "Siz uzatmoqchi bo'lgan printerni belgilang va\n" "\"Uzatish\" tugmasini bosing." #: printer/printerdrake.pm:4043 #, c-format msgid "Do not transfer printers" msgstr "Printerlarni uzatmash" #: printer/printerdrake.pm:4044 printer/printerdrake.pm:4060 #, c-format msgid "Transfer" msgstr "Uzatish" #: printer/printerdrake.pm:4056 #, c-format msgid "" "A printer named \"%s\" already exists under %s. \n" "Click \"Transfer\" to overwrite it.\n" "You can also type a new name or skip this printer." msgstr "" "%s nomli printer %s uchun allaqachon mavjud.\n" "Uni almashtirish uchun \"Uzatish\" tugmasini bosing.\n" "Printerning boshqa nomini kiritishingiz yoki uni o'tkazib jo'natishingiz ham " "mumkin." #: printer/printerdrake.pm:4077 #, c-format msgid "New printer name" msgstr "Yangi printerning nomi" #: printer/printerdrake.pm:4080 #, c-format msgid "Transferring %s..." msgstr "%s uzatilmoqda..." #: printer/printerdrake.pm:4091 #, c-format msgid "" "You have transferred your former default printer (\"%s\"), Should it be also " "the default printer under the new printing system %s?" msgstr "" "Siz oldingi andoza printerni (\"%s\") uzatdingiz. U yangi bosib chiqarish " "tizimi (\"%s\") uchun ham andoza printer bo'lsinmi?" #: printer/printerdrake.pm:4101 #, c-format msgid "Refreshing printer data..." msgstr "Printer ma'lumoti yangilanmoqda..." #: printer/printerdrake.pm:4111 #, c-format msgid "Starting network..." msgstr "Tarmoq ishga tushirilmoqda..." #: printer/printerdrake.pm:4155 printer/printerdrake.pm:4159 #: printer/printerdrake.pm:4161 #, c-format msgid "Configure the network now" msgstr "Tarmoqni moslash" #: printer/printerdrake.pm:4156 #, c-format msgid "Network functionality not configured" msgstr "Tarmoq moslanmagan" #: printer/printerdrake.pm:4157 #, c-format msgid "" "You are going to configure a remote printer. This needs working network " "access, but your network is not configured yet. If you go on without network " "configuration, you will not be able to use the printer which you are " "configuring now. How do you want to proceed?" msgstr "" #: printer/printerdrake.pm:4160 #, c-format msgid "Go on without configuring the network" msgstr "Tarmoqni moslamay davom etish" #: printer/printerdrake.pm:4191 #, c-format msgid "" "The network configuration done during the installation cannot be started " "now. Please check whether the network is accessible after booting your " "system and correct the configuration using the %s Control Center, section " "\"Network & Internet\"/\"Connection\", and afterwards set up the printer, " "also using the %s Control Center, section \"Hardware\"/\"Printer\"" msgstr "" #: printer/printerdrake.pm:4192 #, c-format msgid "" "The network access was not running and could not be started. Please check " "your configuration and your hardware. Then try to configure your remote " "printer again." msgstr "" #: printer/printerdrake.pm:4202 #, c-format msgid "Restarting printing system..." msgstr "Bosib chiqarish sisemasi boshqadan ishga tushirilmoqda..." #: printer/printerdrake.pm:4233 #, c-format msgid "high" msgstr "yuqori" #: printer/printerdrake.pm:4233 #, c-format msgid "paranoid" msgstr "paranoid" #: printer/printerdrake.pm:4235 #, c-format msgid "Installing a printing system in the %s security level" msgstr "" #: printer/printerdrake.pm:4236 #, c-format msgid "" "You are about to install the printing system %s on a system running in the %" "s security level.\n" "\n" "This printing system runs a daemon (background process) which waits for " "print jobs and handles them. This daemon is also accessible by remote " "machines through the network and so it is a possible point for attacks. " "Therefore only a few selected daemons are started by default in this " "security level.\n" "\n" "Do you really want to configure printing on this machine?" msgstr "" #: printer/printerdrake.pm:4272 #, c-format msgid "Starting the printing system at boot time" msgstr "" #: printer/printerdrake.pm:4273 #, c-format msgid "" "The printing system (%s) will not be started automatically when the machine " "is booted.\n" "\n" "It is possible that the automatic starting was turned off by changing to a " "higher security level, because the printing system is a potential point for " "attacks.\n" "\n" "Do you want to have the automatic starting of the printing system turned on " "again?" msgstr "" #: printer/printerdrake.pm:4296 #, c-format msgid "Checking installed software..." msgstr "O'rnatilgan dasturlar tekshirilmoqda..." #: printer/printerdrake.pm:4302 #, c-format msgid "Removing %s..." msgstr "%s olib tashlanmoqda..." #: printer/printerdrake.pm:4306 #, c-format msgid "Could not remove the %s printing system!" msgstr "%s bosib chiqarish tizimini olib tashlab bo'lmadi!" #: printer/printerdrake.pm:4326 #, c-format msgid "Installing %s..." msgstr "%s o'rnatilmoqda..." #: printer/printerdrake.pm:4330 #, c-format msgid "Could not install the %s printing system!" msgstr "%s bosib chiqarish tizimini o'rnatib bo'lmadi!" #: printer/printerdrake.pm:4398 #, c-format msgid "" "In this mode there is no local printing system, all printing requests go " "directly to the server specified below. Note that it is not possible to " "define local print queues then and if the specified server is down it cannot " "be printed at all from this machine." msgstr "" #: printer/printerdrake.pm:4400 #, c-format msgid "" "Enter the host name or IP of your CUPS server and click OK if you want to " "use this mode, click \"Quit\" otherwise." msgstr "" #: printer/printerdrake.pm:4414 #, c-format msgid "Name or IP of remote server:" msgstr "Masofadagi serverning nomi yoki IP raqami:" #: printer/printerdrake.pm:4434 #, c-format msgid "Setting Default Printer..." msgstr "Andoza printer o'rnatilmoqda..." #: printer/printerdrake.pm:4454 #, c-format msgid "Local CUPS printing system or remote CUPS server?" msgstr "Lokal CUPS bosib chiqarish tizimi yoki masofadagi CUPS serveri?" #: printer/printerdrake.pm:4455 #, c-format msgid "The CUPS printing system can be used in two ways: " msgstr "" #: printer/printerdrake.pm:4457 #, c-format msgid "1. The CUPS printing system can run locally. " msgstr "" #: printer/printerdrake.pm:4458 #, c-format msgid "" "Then locally connected printers can be used and remote printers on other " "CUPS servers in the same network are automatically discovered. " msgstr "" #: printer/printerdrake.pm:4459 #, c-format msgid "" "Disadvantage of this approach is, that more resources on the local machine " "are needed: Additional software packages need to be installed, the CUPS " "daemon has to run in the background and needs some memory, and the IPP port " "(port 631) is opened. " msgstr "" #: printer/printerdrake.pm:4461 #, c-format msgid "2. All printing requests are immediately sent to a remote CUPS server. " msgstr "" #: printer/printerdrake.pm:4462 #, c-format msgid "" "Here local resource occupation is reduced to a minimum. No CUPS daemon is " "started or port opened, no software infrastructure for setting up local " "print queues is installed, so less memory and disk space is used. " msgstr "" #: printer/printerdrake.pm:4463 #, c-format msgid "" "Disadvantage is that it is not possible to define local printers then and if " "the specified server is down it cannot be printed at all from this machine. " msgstr "" #: printer/printerdrake.pm:4465 #, c-format msgid "How should CUPS be set up on your machine?" msgstr "" #: printer/printerdrake.pm:4469 printer/printerdrake.pm:4484 #: printer/printerdrake.pm:4488 printer/printerdrake.pm:4494 #, c-format msgid "Remote server, specify Name or IP here:" msgstr "" #: printer/printerdrake.pm:4483 #, c-format msgid "Local CUPS printing system" msgstr "Lokal CUPS bosib chiqarish tizimi" #: printer/printerdrake.pm:4522 #, c-format msgid "Select Printer Spooler" msgstr "Printer spulerini tanlash" #: printer/printerdrake.pm:4523 #, c-format msgid "Which printing system (spooler) do you want to use?" msgstr "Qaysi bosib chiqarish tizimini (spuler) ishlatmoqchisiz?" #: printer/printerdrake.pm:4572 #, c-format msgid "Failed to configure printer \"%s\"!" msgstr "Printerni (\"%s\") moslash muvaffaqiyatsiz tugadi!" #: printer/printerdrake.pm:4587 #, c-format msgid "Installing Foomatic..." msgstr "Foomatic dasturi o'rnatilmoqda..." #: printer/printerdrake.pm:4593 #, c-format msgid "Could not install %s packages, %s cannot be started!" msgstr "" #: printer/printerdrake.pm:4785 #, c-format msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; or to view information about " "it. " msgstr "" "Quyidagi printerlar moslangan. Printerning moslamalarini o'zgartirish, uni " "andoza deb belgilash, yoki u haqida ma'lumotni ko'rish uchun uni ikki marta " "bosing." #: printer/printerdrake.pm:4815 #, c-format msgid "Display all available remote CUPS printers" msgstr "Mavjud bo'lgan masofadagi hamma CUPS printerlarni ko'rsatish" #: printer/printerdrake.pm:4816 #, c-format msgid "Refresh printer list (to display all available remote CUPS printers)" msgstr "" "Printerlar ro'yxatini yangilash (masofadagi hamma CUPS printerlarni " "ko'rsatish uchun)" #: printer/printerdrake.pm:4827 #, c-format msgid "CUPS configuration" msgstr "CUPS'ni moslash" #: printer/printerdrake.pm:4839 #, c-format msgid "Change the printing system" msgstr "Bosib chiqarish tizimini o'zgartirish" #: printer/printerdrake.pm:4848 #, c-format msgid "Normal Mode" msgstr "Oddiy usul" #: printer/printerdrake.pm:4849 #, c-format msgid "Expert Mode" msgstr "Ekspert usuli" #: printer/printerdrake.pm:5118 printer/printerdrake.pm:5176 #: printer/printerdrake.pm:5255 printer/printerdrake.pm:5264 #, c-format msgid "Printer options" msgstr "Printerning parametrlari" #: printer/printerdrake.pm:5154 #, c-format msgid "Modify printer configuration" msgstr "Printerning moslamalarini o'zgartirish" #: printer/printerdrake.pm:5156 #, c-format msgid "" "Printer %s%s\n" "What do you want to modify on this printer?" msgstr "" "Printer %s%s\n" "Bu printerning nimasini o'zgartirishni istaysiz?" #: printer/printerdrake.pm:5161 #, c-format msgid "This printer is disabled" msgstr "Printer o'chirilgan" #: printer/printerdrake.pm:5163 #, c-format msgid "Do it!" msgstr "Bajarish!" #: printer/printerdrake.pm:5168 printer/printerdrake.pm:5223 #, c-format msgid "Printer connection type" msgstr "Printerga ulanishning turi" #: printer/printerdrake.pm:5169 printer/printerdrake.pm:5229 #, c-format msgid "Printer name, description, location" msgstr "Printerning nomi, ta'rifi, manzili" #: printer/printerdrake.pm:5171 printer/printerdrake.pm:5248 #, c-format msgid "Printer manufacturer, model, driver" msgstr "Printerning ishlab chiqaruvchisi, modeli, drayveri" #: printer/printerdrake.pm:5172 printer/printerdrake.pm:5249 #, c-format msgid "Printer manufacturer, model" msgstr "Printerning ishlab chiqaruvchisi, modeli" #: printer/printerdrake.pm:5178 printer/printerdrake.pm:5259 #, c-format msgid "Set this printer as the default" msgstr "Bu printerni andoza deb belgilash" #: printer/printerdrake.pm:5183 printer/printerdrake.pm:5265 #: printer/printerdrake.pm:5267 #, c-format msgid "Enable Printer" msgstr "Printerni yoqish" #: printer/printerdrake.pm:5186 printer/printerdrake.pm:5270 #: printer/printerdrake.pm:5272 #, c-format msgid "Disable Printer" msgstr "Printerni o'chirish" #: printer/printerdrake.pm:5187 printer/printerdrake.pm:5275 #, c-format msgid "Print test pages" msgstr "Sinov betini bosib chiqarish" #: printer/printerdrake.pm:5188 printer/printerdrake.pm:5277 #, c-format msgid "Learn how to use this printer" msgstr "Printerdan foydalanishni o'rganish" #: printer/printerdrake.pm:5189 printer/printerdrake.pm:5279 #, c-format msgid "Remove printer" msgstr "Printerni olib tashlash" #: printer/printerdrake.pm:5237 #, c-format msgid "Removing old printer \"%s\"..." msgstr "Eski printer (\"%s\") olib tashlanmoqda" #: printer/printerdrake.pm:5268 #, c-format msgid "Printer \"%s\" is now enabled." msgstr "Printer \"%s\" yoqildi." #: printer/printerdrake.pm:5273 #, c-format msgid "Printer \"%s\" is now disabled." msgstr "Printer \"%s\" o'chirildi." #: printer/printerdrake.pm:5310 #, c-format msgid "Do you really want to remove the printer \"%s\"?" msgstr "Rostdan printerni (\"%s\") olib tashlashni istaysizmi?" #: printer/printerdrake.pm:5314 #, c-format msgid "Removing printer \"%s\"..." msgstr "Printer (\"%s\") olib tashlanmoqda" #: printer/printerdrake.pm:5338 #, c-format msgid "Default printer" msgstr "Andoza printer" #: printer/printerdrake.pm:5339 #, c-format msgid "The printer \"%s\" is set as the default printer now." msgstr "Printer (\"%s\") andoza deb belgilandi." #: raid.pm:41 #, c-format msgid "Can not add a partition to _formatted_ RAID %s" msgstr "" #: raid.pm:144 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "RAID'ni %d chi darajasi uchun diskning etarli qismlari mavjud emas\n" #: scanner.pm:96 #, c-format msgid "Could not create directory /usr/share/sane/firmware!" msgstr "/usr/share/sane/firmware direktoriyasini yaratib bo'lmadi!" #: scanner.pm:107 #, c-format msgid "Could not create link /usr/share/sane/%s!" msgstr "/usr/share/sane/%s bog'ini yaratib bo'lmadi!" #: scanner.pm:114 #, c-format msgid "Could not copy firmware file %s to /usr/share/sane/firmware!" msgstr "" #: scanner.pm:121 #, c-format msgid "Could not set permissions of firmware file %s!" msgstr "" #: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70 #: standalone/scannerdrake:78 standalone/scannerdrake:346 #: standalone/scannerdrake:382 standalone/scannerdrake:446 #: standalone/scannerdrake:490 standalone/scannerdrake:494 #: standalone/scannerdrake:516 standalone/scannerdrake:581 #, c-format msgid "Scannerdrake" msgstr "Scannerdrake" #: scanner.pm:201 standalone/scannerdrake:947 #, c-format msgid "Could not install the packages needed to share your scanner(s)." msgstr "" #: scanner.pm:202 #, c-format msgid "Your scanner(s) will not be available for non-root users." msgstr "" #: security/help.pm:11 #, c-format msgid "Accept/Refuse bogus IPv4 error messages." msgstr "" #: security/help.pm:13 #, c-format msgid " Accept/Refuse broadcasted icmp echo." msgstr "" #: security/help.pm:15 #, c-format msgid " Accept/Refuse icmp echo." msgstr "" #: security/help.pm:17 #, c-format msgid "Allow/Forbid autologin." msgstr "Avto-kirishga ruxsat etish/etmash." #. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is #: security/help.pm:21 #, c-format msgid "" "If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n" "\n" "If set to NONE, no issues are allowed.\n" "\n" "Else only /etc/issue is allowed." msgstr "" #: security/help.pm:27 #, c-format msgid "Allow/Forbid reboot by the console user." msgstr "Konsol orqali kompyuterni o'chirib-yoqishga ruxsat etish/etmash." #: security/help.pm:29 #, c-format msgid "Allow/Forbid remote root login." msgstr "Root masofadan kirishiga ruxsat etish/etmash." #: security/help.pm:31 #, c-format msgid "Allow/Forbid direct root login." msgstr "Root to'g'ridan-to'g'ri kirishiga ruxsat etish/etmash." #: security/help.pm:33 #, c-format msgid "" "Allow/Forbid the list of users on the system on display managers (kdm and " "gdm)." msgstr "" "Tizimning foydalanuvchilar ro'yxatini displey boshqaruvchilar (KDM va GDM) " "ko'rsatishga ruxsat etish/etmas." #: security/help.pm:35 #, c-format msgid "" "Allow/forbid to export display when\n" "passing from the root account to the other users.\n" "\n" "See pam_xauth(8) for more details.'" msgstr "" #: security/help.pm:40 #, c-format msgid "" "Allow/Forbid X connections:\n" "\n" "- ALL (all connections are allowed),\n" "\n" "- LOCAL (only connection from local machine),\n" "\n" "- NONE (no connection)." msgstr "" #: security/help.pm:48 #, c-format msgid "" "The argument specifies if clients are authorized to connect\n" "to the X server from the network on the tcp port 6000 or not." msgstr "" #. -PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're #: security/help.pm:53 #, c-format msgid "" "Authorize:\n" "\n" "- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if " "set to \"ALL\",\n" "\n" "- only local ones if set to \"LOCAL\"\n" "\n" "- none if set to \"NONE\".\n" "\n" "To authorize the services you need, use /etc/hosts.allow (see hosts.allow" "(5))." msgstr "" #: security/help.pm:63 #, c-format msgid "" "If SERVER_LEVEL (or SECURE_LEVEL if absent)\n" "is greater than 3 in /etc/security/msec/security.conf, creates the\n" "symlink /etc/security/msec/server to point to\n" "/etc/security/msec/server..\n" "\n" "The /etc/security/msec/server is used by chkconfig --add to decide to\n" "add a service if it is present in the file during the installation of\n" "packages." msgstr "" #: security/help.pm:72 #, c-format msgid "" "Enable/Disable crontab and at for users.\n" "\n" "Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n" "and crontab(1))." msgstr "" #: security/help.pm:77 #, c-format msgid "Enable/Disable syslog reports to console 12" msgstr "" #: security/help.pm:79 #, c-format msgid "" "Enable/Disable name resolution spoofing protection. If\n" "\"%s\" is true, also reports to syslog." msgstr "" #: security/help.pm:80 standalone/draksec:213 #, c-format msgid "Security Alerts:" msgstr "Xavfsizlik xabarnomasi:" #: security/help.pm:82 #, c-format msgid "Enable/Disable IP spoofing protection." msgstr "" #: security/help.pm:84 #, c-format msgid "Enable/Disable libsafe if libsafe is found on the system." msgstr "" #: security/help.pm:86 #, c-format msgid "Enable/Disable the logging of IPv4 strange packets." msgstr "" #: security/help.pm:88 #, c-format msgid "Enable/Disable msec hourly security check." msgstr "" #: security/help.pm:90 #, c-format msgid "" " Enabling su only from members of the wheel group or allow su from any user." msgstr "" #: security/help.pm:92 #, c-format msgid "Use password to authenticate users." msgstr "Foydalanuvchilarni tasdiqlash uchun maxfiy so'zdan foydalanish." #: security/help.pm:94 #, c-format msgid "Activate/Disable ethernet cards promiscuity check." msgstr "" #: security/help.pm:96 #, c-format msgid " Activate/Disable daily security check." msgstr " Kundalik xavfsizlik tekshiruvini yoqish/o'chirish." #: security/help.pm:98 #, c-format msgid " Enable/Disable sulogin(8) in single user level." msgstr "" #: security/help.pm:100 #, c-format msgid "Add the name as an exception to the handling of password aging by msec." msgstr "" #: security/help.pm:102 #, c-format msgid "Set password aging to \"max\" days and delay to change to \"inactive\"." msgstr "" #: security/help.pm:104 #, c-format msgid "Set the password history length to prevent password reuse." msgstr "" #: security/help.pm:106 #, c-format msgid "" "Set the password minimum length and minimum number of digit and minimum " "number of capitalized letters." msgstr "" "Maxfiy so'zning eng qisqa uzunligini, undagi sonlarning va bosh harflarning " "eng kichik sonini aniqlash." #: security/help.pm:108 #, c-format msgid "Set the root umask." msgstr "" #: security/help.pm:109 #, c-format msgid "if set to yes, check open ports." msgstr "agar \"ha\" bo'lsa, ochiq portlarni tekshirish" #: security/help.pm:110 #, c-format msgid "" "if set to yes, check for:\n" "\n" "- empty passwords,\n" "\n" "- no password in /etc/shadow\n" "\n" "- for users with the 0 id other than root." msgstr "" #: security/help.pm:117 #, c-format msgid "if set to yes, check permissions of files in the users' home." msgstr "" #: security/help.pm:118 #, c-format msgid "if set to yes, check if the network devices are in promiscuous mode." msgstr "" #: security/help.pm:119 #, c-format msgid "if set to yes, run the daily security checks." msgstr "agar \"ha\" bo'lsa, kundalik xavfsizlik tekshirishlarini bajarish" #: security/help.pm:120 #, c-format msgid "if set to yes, check additions/removals of sgid files." msgstr "" #: security/help.pm:121 #, c-format msgid "if set to yes, check empty password in /etc/shadow." msgstr "" "agar \"ha\" bo'lsa, /etc/shadow faylidagi bo'sh maxfiy so'zlarni tekshirish" #: security/help.pm:122 #, c-format msgid "if set to yes, verify checksum of the suid/sgid files." msgstr "" #: security/help.pm:123 #, c-format msgid "if set to yes, check additions/removals of suid root files." msgstr "" #: security/help.pm:124 #, c-format msgid "if set to yes, report unowned files." msgstr "" #: security/help.pm:125 #, c-format msgid "if set to yes, check files/directories writable by everybody." msgstr "" #: security/help.pm:126 #, c-format msgid "if set to yes, run chkrootkit checks." msgstr "agar \"ha\" bo'lsa, chkrootkit tekshiruvini bajarish" #: security/help.pm:127 #, c-format msgid "" "if set, send the mail report to this email address else send it to root." msgstr "" #: security/help.pm:128 #, c-format msgid "if set to yes, report check result by mail." msgstr "agar \"ha\" bo'lsa, tekshiruv natijasini xat orqali jo'natish" #: security/help.pm:129 #, c-format msgid "Do not send mails if there's nothing to warn about" msgstr "" #: security/help.pm:130 #, c-format msgid "if set to yes, run some checks against the rpm database." msgstr "" #: security/help.pm:131 #, c-format msgid "if set to yes, report check result to syslog." msgstr "" #: security/help.pm:132 #, c-format msgid "if set to yes, reports check result to tty." msgstr "" #: security/help.pm:134 #, c-format msgid "Set shell commands history size. A value of -1 means unlimited." msgstr "" "Konsoldan kiritilgan buyruqlar tarixining hajmini aniqlash. -1 cheksizga " "teng." #: security/help.pm:136 #, c-format msgid "Set the shell timeout. A value of zero means no timeout." msgstr "" #: security/help.pm:136 #, c-format msgid "Timeout unit is second" msgstr "" #: security/help.pm:138 #, c-format msgid "Set the user umask." msgstr "" #: security/l10n.pm:11 #, c-format msgid "Accept bogus IPv4 error messages" msgstr "" #: security/l10n.pm:12 #, c-format msgid "Accept broadcasted icmp echo" msgstr "" #: security/l10n.pm:13 #, c-format msgid "Accept icmp echo" msgstr "" #: security/l10n.pm:15 #, c-format msgid "/etc/issue* exist" msgstr "/etc/issue* mavjud" #: security/l10n.pm:16 #, c-format msgid "Reboot by the console user" msgstr "Konsoldan kompyuterni o'chirib-yoqish" #: security/l10n.pm:17 #, c-format msgid "Allow remote root login" msgstr "Root masofadan kirishiga ruxsat etish" #: security/l10n.pm:18 #, c-format msgid "Direct root login" msgstr "root'ning to'g'ridan-to'g'ri kirishi" #: security/l10n.pm:19 #, c-format msgid "List users on display managers (kdm and gdm)" msgstr "" "Foydalanuvchilarning ro'yxatini displey boshqaruvchilarda (KDM va GDM) " "ko'rsatish" #: security/l10n.pm:20 #, c-format msgid "Export display when passing from root to the other users" msgstr "" #: security/l10n.pm:21 #, c-format msgid "Allow X Window connections" msgstr "X Windows ulanishlarga ruxsat etish" #: security/l10n.pm:22 #, c-format msgid "Authorize TCP connections to X Window" msgstr "" #: security/l10n.pm:23 #, c-format msgid "Authorize all services controlled by tcp_wrappers" msgstr "" #: security/l10n.pm:24 #, c-format msgid "Chkconfig obey msec rules" msgstr "" #: security/l10n.pm:25 #, c-format msgid "Enable \"crontab\" and \"at\" for users" msgstr "" #: security/l10n.pm:26 #, c-format msgid "Syslog reports to console 12" msgstr "" #: security/l10n.pm:27 #, c-format msgid "Name resolution spoofing protection" msgstr "" #: security/l10n.pm:28 #, c-format msgid "Enable IP spoofing protection" msgstr "" #: security/l10n.pm:29 #, c-format msgid "Enable libsafe if libsafe is found on the system" msgstr "" #: security/l10n.pm:30 #, c-format msgid "Enable the logging of IPv4 strange packets" msgstr "" #: security/l10n.pm:31 #, c-format msgid "Enable msec hourly security check" msgstr "" #: security/l10n.pm:32 #, c-format msgid "Enable su only from the wheel group members or for any user" msgstr "" #: security/l10n.pm:33 #, c-format msgid "Use password to authenticate users" msgstr "Foydalanuvchilarni tasdiqlash uchun maxfiy so'zdan foydalanish" #: security/l10n.pm:34 #, c-format msgid "Ethernet cards promiscuity check" msgstr "" #: security/l10n.pm:35 #, c-format msgid "Daily security check" msgstr "Kundalik xavfsizlik tekshiruvi" #: security/l10n.pm:36 #, c-format msgid "Sulogin(8) in single user level" msgstr "" #: security/l10n.pm:37 #, c-format msgid "No password aging for" msgstr "" #: security/l10n.pm:38 #, c-format msgid "Set password expiration and account inactivation delays" msgstr "" #: security/l10n.pm:39 #, c-format msgid "Password history length" msgstr "Maxfiy so'z tarixining uzunligi" #: security/l10n.pm:40 #, c-format msgid "Password minimum length and number of digits and upcase letters" msgstr "" "Maxfiy so'zning eng qisqa uzunligi, undagi sonlarning va bosh harflarning " "soni" #: security/l10n.pm:41 #, c-format msgid "Root umask" msgstr "" #: security/l10n.pm:42 #, c-format msgid "Shell history size" msgstr "Konsolda bajarilgan buyruqlar tarixining hajmi" #: security/l10n.pm:43 #, c-format msgid "Shell timeout" msgstr "Konsol uchun taymaut" #: security/l10n.pm:44 #, c-format msgid "User umask" msgstr "" #: security/l10n.pm:45 #, c-format msgid "Check open ports" msgstr "Ochiq portlarni tekshirish" #: security/l10n.pm:46 #, c-format msgid "Check for unsecured accounts" msgstr "" #: security/l10n.pm:47 #, c-format msgid "Check permissions of files in the users' home" msgstr "" #: security/l10n.pm:48 #, c-format msgid "Check if the network devices are in promiscuous mode" msgstr "" #: security/l10n.pm:49 #, c-format msgid "Run the daily security checks" msgstr "Kundalik xavfsizlik tekshirishlarini bajarish" #: security/l10n.pm:50 #, c-format msgid "Check additions/removals of sgid files" msgstr "" #: security/l10n.pm:51 #, c-format msgid "Check empty password in /etc/shadow" msgstr "Bo'sh maxfiy so'zni /etc/shadow faylida tekshirish" #: security/l10n.pm:52 #, c-format msgid "Verify checksum of the suid/sgid files" msgstr "suid/sgid fayllarning checksum'ini tekshirish" #: security/l10n.pm:53 #, c-format msgid "Check additions/removals of suid root files" msgstr "" #: security/l10n.pm:54 #, c-format msgid "Report unowned files" msgstr "" #: security/l10n.pm:55 #, c-format msgid "Check files/directories writable by everybody" msgstr "" #: security/l10n.pm:56 #, c-format msgid "Run chkrootkit checks" msgstr "chkrootkit tekshiruvlarini bajarish" #: security/l10n.pm:57 #, c-format msgid "Do not send mails when unneeded" msgstr "" #: security/l10n.pm:58 #, c-format msgid "If set, send the mail report to this email address else send it to root" msgstr "" #: security/l10n.pm:59 #, c-format msgid "Report check result by mail" msgstr "Tekshiruv natijasini elektron xat orqali jo'natish" #: security/l10n.pm:60 #, c-format msgid "Run some checks against the rpm database" msgstr "" #: security/l10n.pm:61 #, c-format msgid "Report check result to syslog" msgstr "" #: security/l10n.pm:62 #, c-format msgid "Reports check result to tty" msgstr "" #: security/level.pm:10 #, c-format msgid "Welcome To Crackers" msgstr "Krakerlarga marhamat" #: security/level.pm:11 #, c-format msgid "Poor" msgstr "Past" #: security/level.pm:13 #, c-format msgid "High" msgstr "Yuqori" #: security/level.pm:14 #, c-format msgid "Higher" msgstr "Juda yuqori" #: security/level.pm:15 #, c-format msgid "Paranoid" msgstr "Paranoid" #: security/level.pm:41 #, c-format msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive. It must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" #: security/level.pm:44 #, c-format msgid "" "Passwords are now enabled, but use as a networked computer is still not " "recommended." msgstr "" #: security/level.pm:45 #, c-format msgid "" "This is the standard security recommended for a computer that will be used " "to connect to the Internet as a client." msgstr "" "Bu Internet tarmog'ida klient sifatida ishlatiladigan kompyuter uchun " "tavsiya etilgan xavfsizlikning andoza darajasi." #: security/level.pm:46 #, c-format msgid "" "There are already some restrictions, and more automatic checks are run every " "night." msgstr "" "Tizimda allaqachon ba'zi cheklashlar mavjud va har kuni avtomatik " "tekshiruvlar bajariladi." #: security/level.pm:47 #, c-format msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which can " "accept\n" "connections from many clients. Note: if your machine is only a client on the " "Internet, you should choose a lower level." msgstr "" "Xavfsizlikning bu darajasida tizimni server sifatida ishlatish mumkin.\n" "Tizimni bir qancha klientlar bilan aloqa o'rnata oladigan server sifatida " "ishlatish uchun xavfsizlik darajasi etarlicha yuqori.\n" "Izoh: agar kompyuteringizni Internet tarmog'ida klient sifatida " "ishlatsangiz, pastroq darajani tanlang." #: security/level.pm:50 #, c-format msgid "" "This is similar to the previous level, but the system is entirely closed and " "security features are at their maximum." msgstr "" "Bu daraja oldingi darajaga o'xshaydi, ammo tizim umuman yopiq va xavfsizlik\n" "parametrlari eng yuqori qiymatlarga ega." #: security/level.pm:55 #, c-format msgid "DrakSec Basic Options" msgstr "DrakSec asosiy parametrlari" #: security/level.pm:56 #, c-format msgid "Please choose the desired security level" msgstr "Iltimos istalgan xavfsizlik darajasini tanlang" #: security/level.pm:60 #, c-format msgid "Security level" msgstr "Xavfsizlik darajasi" #: security/level.pm:62 #, c-format msgid "Use libsafe for servers" msgstr "Serverlar uchun libsafe'dan foydalanish" #: security/level.pm:63 #, c-format msgid "" "A library which defends against buffer overflow and format string attacks." msgstr "" #: security/level.pm:64 #, c-format msgid "Security Administrator (login or email)" msgstr "Xavfsizlik boshqaruvchi (foydalanuvchi yoki elektron pochtasi)" #: services.pm:19 #, c-format msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "" "ALSA (Advanced Linux Sound Architecture) tovush tizimini ishga tushirish" #: services.pm:20 #, c-format msgid "Anacron is a periodic command scheduler." msgstr "" #: services.pm:21 #, c-format msgid "" "apmd is used for monitoring battery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" #: services.pm:23 #, c-format msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" #: services.pm:25 #, c-format msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" #: services.pm:28 #, c-format msgid "" "FAM is a file monitoring daemon. It is used to get reports when files " "change.\n" "It is used by GNOME and KDE" msgstr "" #: services.pm:30 #, c-format msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" #: services.pm:33 #, c-format msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "" #: services.pm:35 #, c-format msgid "" "Apache is a World Wide Web server. It is used to serve HTML files and CGI." msgstr "" #: services.pm:36 #, c-format msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" #: services.pm:40 #, c-format msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" #: services.pm:42 #, c-format msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" #: services.pm:45 #, c-format msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" #: services.pm:47 #, c-format msgid "Automatic detection and configuration of hardware at boot." msgstr "Tizimni yuklashda asbob-uskunalarni avto-aniqlash va moslash." #: services.pm:48 #, c-format msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "" #: services.pm:50 #, c-format msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" #: services.pm:52 #, c-format msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "" #: services.pm:54 #, c-format msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve host " "names to IP addresses." msgstr "" #: services.pm:55 #, c-format msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" #: services.pm:57 #, c-format msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" #: services.pm:59 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" #: services.pm:62 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" #: services.pm:64 #, c-format msgid "" "Automatically switch on numlock key locker under console\n" "and Xorg at boot." msgstr "" #: services.pm:66 #, c-format msgid "Support the OKI 4w and compatible winprinters." msgstr "" #: services.pm:67 #, c-format msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It will not get started unless configured so it is safe " "to have\n" "it installed on machines that do not need it." msgstr "" #: services.pm:70 #, c-format msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" #: services.pm:73 #, c-format msgid "" "Postfix is a Mail Transport Agent, which is the program that moves mail from " "one machine to another." msgstr "" #: services.pm:74 #, c-format msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" #: services.pm:76 #, c-format msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle or DVD players" msgstr "" #: services.pm:78 #, c-format msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" #: services.pm:81 #, c-format msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" #: services.pm:83 #, c-format msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" #: services.pm:85 #, c-format msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similar to finger)." msgstr "" #: services.pm:87 #, c-format msgid "Launch the sound system on your machine" msgstr "Kompyuteringizda tovush tizimini ishga tushirish" #: services.pm:88 #, c-format msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" #: services.pm:90 #, c-format msgid "Load the drivers for your usb devices." msgstr "USB uskunalaringiz uchun drayverlarni yuklash." #: services.pm:91 #, c-format msgid "Starts the X Font Server (this is mandatory for Xorg to run)." msgstr "" "X shrift serverini (Xorg'ni ishga tushirish uchun kerak) ishga tushiradi." #: services.pm:115 services.pm:157 #, c-format msgid "Choose which services should be automatically started at boot time" msgstr "Tizim yuklanayotganda ishga tushishi kerak bo'lgan xizmatlarni tanlang" #: services.pm:127 #, c-format msgid "Printing" msgstr "Bosib chiqarish" #: services.pm:128 #, c-format msgid "Internet" msgstr "Internet" #: services.pm:131 #, c-format msgid "File sharing" msgstr "Fayl bilan bo'lishish" #: services.pm:138 #, c-format msgid "Remote Administration" msgstr "Masofadan turib boshqarish" #: services.pm:146 #, c-format msgid "Database Server" msgstr "Ma'lumot baza serveri" #: services.pm:209 #, c-format msgid "running" msgstr "ishlayapti" #: services.pm:209 #, c-format msgid "stopped" msgstr "to'xtatilgan" #: services.pm:213 #, c-format msgid "Services and daemons" msgstr "Xizmat va demonlar" #: services.pm:219 #, c-format msgid "" "No additional information\n" "about this service, sorry." msgstr "" "Uzr, bu xizmat haqida\n" "qo'shimcha ma'lumot yo'q." #: services.pm:224 ugtk2.pm:1018 #, c-format msgid "Info" msgstr "Ma'lumot" #: services.pm:227 #, c-format msgid "Start when requested" msgstr "Talab qilinganda ishga tushirish" #: services.pm:227 #, c-format msgid "On boot" msgstr "Tizim yuklanayotganda" #: services.pm:244 standalone/drakroam:185 #, c-format msgid "Start" msgstr "Ishga tushirish" #: services.pm:244 standalone/drakroam:186 #, c-format msgid "Stop" msgstr "To'xtatish" #: share/advertising/01.pl:13 #, c-format msgid "What is Mandriva Linux?" msgstr "Mandriva Linux nima?" #: share/advertising/01.pl:15 #, c-format msgid "Welcome to Mandriva Linux!" msgstr "Mandriva Linux tizimiga marhamat!" #: share/advertising/01.pl:17 #, c-format msgid "" "Mandriva Linux is a Linux distribution that comprises the core of the " "system, called the operating system (based on the Linux kernel) " "together with a lot of applications meeting every need you could even " "think of." msgstr "" #: share/advertising/01.pl:19 #, c-format msgid "" "Mandriva Linux is the most user-friendly Linux distribution today. It " "is also one of the most widely used Linux distributions worldwide!" msgstr "" #: share/advertising/02.pl:13 #, c-format msgid "Open Source" msgstr "Open Source" #: share/advertising/02.pl:15 #, c-format msgid "Welcome to the world of open source!" msgstr "Open Source olamiga marhamat!" #: share/advertising/02.pl:17 #, fuzzy, c-format msgid "" "Mandriva Linux is committed to the open source model. This means that this " "new release is the result of collaboration between Mandriva's team " "of developers and the worldwide community of Mandriva Linux " "contributors." msgstr "" "Mandriva Linux operatsion tizimi va uning ko'plab dasturlari Mandriva " "tuzuvchilari va butun olam bo'ylab hissa qo'shuvchilar hamkorlikda bajargan " "ish natijasidir." #: share/advertising/02.pl:19 #, c-format msgid "" "We would like to thank everyone who participated in the development " "of this latest release." msgstr "" "Ushbu mahsulotni ishlab chiqarishda o'z hissasini qo'shgan barchaga biz o'z " "minnatdorchiligimizni bildiramiz." #: share/advertising/03.pl:13 #, c-format msgid "The GPL" msgstr "GPL" #: share/advertising/03.pl:15 #, c-format msgid "" "Most of the software included in the distribution and all of the Mandriva " "Linux tools are licensed under the General Public License." msgstr "" #: share/advertising/03.pl:17 #, c-format msgid "" "The GPL is at the heart of the open source model; it grants everyone the " "freedom to use, study, distribute and improve the software any way " "they want, provided they make the results available." msgstr "" #: share/advertising/03.pl:19 #, c-format msgid "" "The main benefit of this is that the number of developers is virtually " "unlimited, resulting in very high quality software." msgstr "" #: share/advertising/04.pl:13 #, c-format msgid "Join the Community" msgstr "Birlashmaga qo'shiling" #: share/advertising/04.pl:15 #, c-format msgid "" "Mandriva Linux has one of the biggest communities of users and " "developers. The role of such a community is very wide, ranging from bug " "reporting to the development of new applications. The community plays a " "key role in the Mandriva Linux world." msgstr "" #: share/advertising/04.pl:17 #, c-format msgid "" "To learn more about our dynamic community, please visit www." "mandrivalinux.com or directly www.mandrivalinux.com/en/cookerdevel." "php3 if you would like to get involved in the development." msgstr "" #: share/advertising/05.pl:15 #, c-format msgid "Download Version" msgstr "Download versiya" #: share/advertising/05.pl:17 #, c-format msgid "" "You are now installing Mandriva Linux Download. This is the free " "version that Mandriva wants to keep available to everyone." msgstr "" #: share/advertising/05.pl:19 #, c-format msgid "" "The Download version cannot include all the software that is not open " "source. Therefore, you will not find in the Download version:" msgstr "" #: share/advertising/05.pl:20 #, c-format msgid "" "\t* Proprietary drivers (such as drivers for NVIDIA®, ATI™, etc.)." msgstr "" #: share/advertising/05.pl:21 #, c-format msgid "" "\t* Proprietary software (such as Acrobat® Reader®, RealPlayer®, " "Flash™, etc.)." msgstr "" #: share/advertising/05.pl:23 #, c-format msgid "" "You will not have access to the services included in the other " "Mandriva products either." msgstr "" #: share/advertising/06.pl:13 #, c-format msgid "Discovery, Your First Linux Desktop" msgstr "" #: share/advertising/06.pl:15 #, c-format msgid "You are now installing Mandriva Linux Discovery." msgstr "" #: share/advertising/06.pl:17 #, c-format msgid "" "Discovery is the easiest and most user-friendly Linux " "distribution. It includes a hand-picked selection of premium software " "for office, multimedia and Internet activities. Its menu is task-oriented, " "with a single application per task." msgstr "" #: share/advertising/07.pl:13 #, c-format msgid "PowerPack, The Ultimate Linux Desktop" msgstr "" #: share/advertising/07.pl:15 #, c-format msgid "You are now installing Mandriva Linux PowerPack." msgstr "" #: share/advertising/07.pl:17 #, c-format msgid "" "PowerPack is Mandriva's premier Linux desktop product. PowerPack " "includes thousands of applications - everything from the most popular " "to the most advanced." msgstr "" #: share/advertising/08.pl:13 #, c-format msgid "PowerPack+, The Linux Solution for Desktops and Servers" msgstr "" #: share/advertising/08.pl:15 #, c-format msgid "You are now installing Mandriva Linux PowerPack+." msgstr "" #: share/advertising/08.pl:17 #, c-format msgid "" "PowerPack+ is a full-featured Linux solution for small to medium-" "sized networks. PowerPack+ includes thousands of desktop " "applications and a comprehensive selection of world-class server " "applications." msgstr "" #: share/advertising/09.pl:13 #, c-format msgid "Mandriva Products" msgstr "Mandriva mahsulotlari" #: share/advertising/09.pl:15 #, c-format msgid "" "Mandriva has developed a wide range of Mandriva Linux products." msgstr "" #: share/advertising/09.pl:17 #, c-format msgid "The Mandriva Linux products are:" msgstr "" #: share/advertising/09.pl:18 #, c-format msgid "\t* Discovery, Your First Linux Desktop." msgstr "" #: share/advertising/09.pl:19 #, c-format msgid "\t* PowerPack, The Ultimate Linux Desktop." msgstr "" #: share/advertising/09.pl:20 #, c-format msgid "\t* PowerPack+, The Linux Solution for Desktops and Servers." msgstr "" #: share/advertising/09.pl:21 #, c-format msgid "" "\t* Mandriva Linux for x86-64, The Mandriva Linux solution for making " "the most of your 64-bit processor." msgstr "" #: share/advertising/10.pl:15 #, c-format msgid "Mandriva Products (Nomad Products)" msgstr "" #: share/advertising/10.pl:17 #, c-format msgid "" "Mandriva has developed two products that allow you to use Mandriva Linux " "on any computer and without any need to actually install it:" msgstr "" #: share/advertising/10.pl:18 #, c-format msgid "" "\t* Move, a Mandriva Linux distribution that runs entirely from a " "bootable CD-ROM." msgstr "" #: share/advertising/10.pl:19 #, c-format msgid "" "\t* GlobeTrotter, a Mandriva Linux distribution pre-installed on the " "ultra-compact “LaCie Mobile Hard Drive”." msgstr "" #: share/advertising/11.pl:13 #, c-format msgid "Mandriva Products (Professional Solutions)" msgstr "" #: share/advertising/11.pl:15 #, c-format msgid "" "Below are the Mandriva products designed to meet the professional needs:" msgstr "" #: share/advertising/11.pl:16 #, c-format msgid "" "\t* Corporate Desktop, The Mandriva Linux Desktop for Businesses." msgstr "" #: share/advertising/11.pl:17 #, c-format msgid "\t* Corporate Server, The Mandriva Linux Server Solution." msgstr "" #: share/advertising/11.pl:18 #, c-format msgid "" "\t* Multi-Network Firewall, The Mandriva Linux Security Solution." msgstr "" #: share/advertising/12.pl:13 #, c-format msgid "The KDE Choice" msgstr "" #: share/advertising/12.pl:15 #, c-format msgid "" "With your Discovery, you will be introduced to KDE, the most advanced " "and user-friendly graphical desktop environment available." msgstr "" #: share/advertising/12.pl:17 #, c-format msgid "" "KDE will make your first steps with Linux so easy that you " "will not ever think of running another operating system!" msgstr "" #: share/advertising/12.pl:19 #, c-format msgid "" "KDE also includes a lot of well integrated applications such as " "Konqueror, the web browser and Kontact, the personal information manager." msgstr "" #: share/advertising/13-a.pl:13 share/advertising/13-b.pl:13 #, c-format msgid "Choose your Favorite Desktop Environment" msgstr "Sizga mos kelgan grafik ish stolini tanlang" #: share/advertising/13-a.pl:15 #, c-format msgid "" "With PowerPack, you will have the choice of the graphical desktop " "environment. Mandriva has chosen KDE as the default one." msgstr "" #: share/advertising/13-a.pl:17 share/advertising/13-b.pl:17 #, c-format msgid "" "KDE is one of the most advanced and user-friendly graphical " "desktop environment available. It includes a lot of integrated applications." msgstr "" #: share/advertising/13-a.pl:19 share/advertising/13-b.pl:19 #, c-format msgid "" "But we advise you to try all available ones (including GNOME, " "IceWM, etc.) and pick your favorite." msgstr "" #: share/advertising/13-b.pl:15 #, c-format msgid "" "With PowerPack+, you will have the choice of the graphical desktop " "environment. Mandriva has chosen KDE as the default one." msgstr "" #: share/advertising/14.pl:15 #, c-format msgid "OpenOffice.org" msgstr "OpenOffice.org" #: share/advertising/14.pl:17 #, c-format msgid "With Discovery, you will discover OpenOffice.org." msgstr "" #: share/advertising/14.pl:19 #, c-format msgid "" "It is a full-featured office suite that includes word processor, " "spreadsheet, presentation and drawing applications." msgstr "" #: share/advertising/14.pl:21 #, c-format msgid "" "OpenOffice.org can read and write most types of Microsoft® Office " "documents such as Word, Excel and PowerPoint® files." msgstr "" #: share/advertising/15.pl:13 #, c-format msgid "Kontact" msgstr "Kontact" #: share/advertising/15.pl:15 #, c-format msgid "" "Discovery includes Kontact, the new KDE groupware solution." msgstr "" #: share/advertising/15.pl:17 #, c-format msgid "" "More than just a full-featured e-mail client, Kontact also includes " "an address book, a calendar, plus a tool for taking notes!" msgstr "" #: share/advertising/15.pl:19 #, c-format msgid "" "It is the easiest way to communicate with your contacts and to organize your " "time." msgstr "" #: share/advertising/16.pl:13 #, c-format msgid "Surf the Internet" msgstr "Internetda sayr qiling" #: share/advertising/16.pl:15 #, c-format msgid "Discovery will give you access to every Internet resource:" msgstr "" #: share/advertising/16.pl:16 #, c-format msgid "\t* Browse the Web with Konqueror." msgstr "\t* Konqueror yordamida Internetda sayr qiling" #: share/advertising/16.pl:17 #, c-format msgid "\t* Chat online with your friends using Kopete." msgstr "" "\t* Kopete yordamida o'rtoqlaringiz bilan Internet orqali gaplashing" #: share/advertising/16.pl:18 #, c-format msgid "\t* Transfer files with KBear." msgstr "\t* KBear yordamida Internetdan fayllarni yozib oling" #: share/advertising/16.pl:19 share/advertising/17.pl:19 #: share/advertising/18.pl:22 #, c-format msgid "\t* ..." msgstr "\t* va hokazo" #: share/advertising/17.pl:13 #, c-format msgid "Enjoy our Multimedia Features" msgstr "" #: share/advertising/17.pl:15 #, c-format msgid "Discovery will also make multimedia very easy for you:" msgstr "" #: share/advertising/17.pl:16 #, c-format msgid "\t* Watch your favorite videos with Kaffeine." msgstr "" #: share/advertising/17.pl:17 #, c-format msgid "\t* Listen to your music files with amaroK." msgstr "" #: share/advertising/17.pl:18 #, c-format msgid "\t* Edit and create images with the GIMP." msgstr "\t* Rasm va suratlarni GIMP bilan tahrirlang" #: share/advertising/18.pl:13 #, c-format msgid "Enjoy the Wide Range of Applications" msgstr "" #: share/advertising/18.pl:15 #, c-format msgid "" "In the Mandriva Linux menu you will find easy-to-use applications for " "all of your tasks:" msgstr "" "Mandriva Linux menyusidan barcha vazifalar uchun qulay " "dasturlarni topsa bo'ladi:" #: share/advertising/18.pl:16 #, c-format msgid "\t* Create, edit and share office documents with OpenOffice.org." msgstr "" "\t* Hujjatlaringizni OpenOffice.org yordamida yarating va tahrirlang" #: share/advertising/18.pl:17 #, c-format msgid "" "\t* Manage your personal data with the integrated personal information " "suites Kontact and Evolution." msgstr "" #: share/advertising/18.pl:18 #, c-format msgid "\t* Browse the web with Mozilla and Konqueror." msgstr "" "\t* Mozilla va Konqueror yordamida internetda sayr qiling" #: share/advertising/18.pl:19 #, c-format msgid "\t* Participate in online chat with Kopete." msgstr "\t* Onlayn suxbatda Kopete yordamida qatnashing" #: share/advertising/18.pl:20 #, c-format msgid "" "\t* Listen to your audio CDs and music files, watch your " "videos." msgstr "" "\t* Audio kompakt-disk va audio fayllarni tinglang, " "videoni tomosha qiling" #: share/advertising/18.pl:21 #, c-format msgid "\t* Edit and create images with the GIMP." msgstr "\t* GIMP yordamida rasm yarating va tahrirlang" #: share/advertising/19.pl:13 #, c-format msgid "Development Environments" msgstr "Tuzish vositalari" #: share/advertising/19.pl:15 share/advertising/22.pl:17 #, c-format msgid "" "PowerPack gives you the best tools to develop your own applications." msgstr "" #: share/advertising/19.pl:17 #, c-format msgid "" "You will enjoy the powerful, integrated development environment from KDE, " "KDevelop, which will let you program in a lot of languages." msgstr "" #: share/advertising/19.pl:19 #, c-format msgid "" "PowerPack also ships with GCC, the leading Linux compiler and GDB, the associated debugger." msgstr "" #: share/advertising/20.pl:13 #, c-format msgid "Development Editors" msgstr "Tuzish uchun tahrirchilar" #: share/advertising/20.pl:15 #, c-format msgid "PowerPack will let you choose between those popular editors:" msgstr "" #: share/advertising/20.pl:16 #, c-format msgid "\t* Emacs: a customizable and real time display editor." msgstr "" #: share/advertising/20.pl:17 #, c-format msgid "" "\t* XEmacs: another open source text editor and application " "development system." msgstr "" #: share/advertising/20.pl:18 #, c-format msgid "" "\t* Vim: an advanced text editor with more features than standard Vi." msgstr "" "\t* Vim: Andoza Vi tahrirchiga qaraganda ko'proq imkoniyatlarga ega " "kengaytirilgan matn tahrirchi" #: share/advertising/21.pl:15 #, c-format msgid "Development Languages" msgstr "Dasturlash tillari" #: share/advertising/21.pl:17 #, c-format msgid "" "With all these powerful tools, you will be able to write applications " "in dozens of programming languages:" msgstr "" #: share/advertising/21.pl:18 #, c-format msgid "\t* The famous C language." msgstr "" #: share/advertising/21.pl:19 #, c-format msgid "\t* Object oriented languages:" msgstr "" #: share/advertising/21.pl:20 #, c-format msgid "\t\t* C++" msgstr "\t\t* C++" #: share/advertising/21.pl:21 #, c-format msgid "\t\t* Java™" msgstr "\t\t* Java™" #: share/advertising/21.pl:22 #, fuzzy, c-format msgid "\t* Scripting languages:" msgstr "Bosib chiqarish boshqaruvchisi" #: share/advertising/21.pl:23 #, c-format msgid "\t\t* Perl" msgstr "\t\t* Perl" #: share/advertising/21.pl:24 #, c-format msgid "\t\t* Python" msgstr "\t\t* Python" #: share/advertising/21.pl:25 share/advertising/28.pl:24 #, c-format msgid "\t* And many more." msgstr "\t* Va boshqalar" #: share/advertising/22.pl:15 #, c-format msgid "Development Tools" msgstr "Tuzish vositalari" #: share/advertising/22.pl:19 #, c-format msgid "" "With the powerful integrated development environment KDevelop and the " "leading Linux compiler GCC, you will be able to create applications " "in many different languages (C, C++, Java™, Perl, Python, etc.)." msgstr "" #: share/advertising/23.pl:13 #, fuzzy, c-format msgid "Groupware Server" msgstr "Serverlar" #: share/advertising/23.pl:15 #, c-format msgid "" "PowerPack+ will give you access to Kolab, a full-featured " "groupware server which will, thanks to the client Kontact, " "allow you to:" msgstr "" #: share/advertising/23.pl:16 #, c-format msgid "\t* Send and receive your e-mails." msgstr "\t* Elektron maktublarni jo'natish va qabul qilish" #: share/advertising/23.pl:17 #, c-format msgid "\t* Share your agendas and your address books." msgstr "" #: share/advertising/23.pl:18 #, c-format msgid "\t* Manage your memos and task lists." msgstr "" #: share/advertising/24.pl:15 #, c-format msgid "Servers" msgstr "Serverlar" #: share/advertising/24.pl:17 #, c-format msgid "" "Empower your business network with premier server solutions including:" msgstr "" #: share/advertising/24.pl:18 #, c-format msgid "" "\t* Samba: File and print services for Microsoft® Windows® clients." msgstr "" "\t* Samba: Microsoft® Windows® klientlari uchun fayl va bosib " "chiqarish xizmatlari" #: share/advertising/24.pl:19 #, c-format msgid "\t* Apache: The most widely used web server." msgstr "\t* Apache: Eng keng ishlatiladigan veb-server" #: share/advertising/24.pl:20 #, c-format msgid "" "\t* MySQL and PostgreSQL: The world's most popular open source " "databases." msgstr "" "\t* MySQL va PostgreSQL: Dunyodagi eng ommabop Open Source " "ma'lumot bazasi" #: share/advertising/24.pl:21 #, c-format msgid "" "\t* CVS: Concurrent Versions System, the dominant open source network-" "transparent version control system." msgstr "" #: share/advertising/24.pl:22 #, c-format msgid "" "\t* ProFTPD: The highly configurable GPL-licensed FTP server software." msgstr "" #: share/advertising/24.pl:23 #, c-format msgid "" "\t* Postfix and Sendmail: The popular and powerful mail " "servers." msgstr "" #: share/advertising/25.pl:13 #, c-format msgid "Mandriva Linux Control Center" msgstr "Mandriva Linux boshqaruv markazi" #: share/advertising/25.pl:15 #, c-format msgid "" "The Mandriva Linux Control Center is an essential collection of " "Mandriva Linux-specific utilities designed to simplify the configuration of " "your computer." msgstr "" #: share/advertising/25.pl:17 #, c-format msgid "" "You will immediately appreciate this collection of more than 60 handy " "utilities for easily configuring your system: hardware devices, mount " "points, network and Internet, security level of your computer, etc." msgstr "" #: share/advertising/26.pl:13 #, c-format msgid "The Open Source Model" msgstr "" #: share/advertising/26.pl:15 #, c-format msgid "" "Like all computer programming, open source software requires time and " "people for development. In order to respect the open source philosophy, " "Mandriva sells added value products and services to keep improving " "Mandriva Linux. If you want to support the open source philosophy " "and the development of Mandriva Linux, please consider buying one of " "our products or services!" msgstr "" #: share/advertising/27.pl:13 #, c-format msgid "Online Store" msgstr "Internet do'kon" #: share/advertising/27.pl:15 #, c-format msgid "" "To learn more about Mandriva products and services, you can visit our e-" "commerce platform." msgstr "" #: share/advertising/27.pl:17 #, c-format msgid "There you can find all our products, services and third-party products." msgstr "" #: share/advertising/27.pl:19 #, c-format msgid "" "This platform has just been redesigned to improve its efficiency and " "usability." msgstr "" #: share/advertising/27.pl:21 #, c-format msgid "Stop by today at store.mandriva.com!" msgstr "" #: share/advertising/28.pl:15 #, c-format msgid "Mandriva Club" msgstr "Mandriva Club" #: share/advertising/28.pl:17 #, c-format msgid "" "Mandriva Club is the perfect companion to your Mandriva Linux " "product.." msgstr "" #: share/advertising/28.pl:19 #, c-format msgid "" "Take advantage of valuable benefits by joining Mandriva Club, such as:" msgstr "" #: share/advertising/28.pl:20 #, c-format msgid "" "\t* Special discounts on products and services of our online store " "store.mandriva.com." msgstr "" #: share/advertising/28.pl:21 #, c-format msgid "" "\t* Access to commercial applications (for example to NVIDIA® or ATI™ " "drivers)." msgstr "" #: share/advertising/28.pl:22 #, fuzzy, c-format msgid "\t* Participation in Mandriva Linux user forums." msgstr "\t* Onlayn suxbatda Kopete yordamida qatnashing" #: share/advertising/28.pl:23 #, c-format msgid "" "\t* Early and privileged access, before public release, to Mandriva " "Linux ISO images." msgstr "" #: share/advertising/29.pl:13 #, c-format msgid "Mandriva Online" msgstr "Mandriva Online" #: share/advertising/29.pl:15 #, c-format msgid "" "Mandriva Online is a new premium service that Mandriva is proud to " "offer its customers!" msgstr "" #: share/advertising/29.pl:17 #, c-format msgid "" "Mandriva Online provides a wide range of valuable services for easily " "updating your Mandriva Linux systems:" msgstr "" #: share/advertising/29.pl:18 #, c-format msgid "\t* Perfect system security (automated software updates)." msgstr "" #: share/advertising/29.pl:19 #, c-format msgid "" "\t* Notification of updates (by e-mail or by an applet on the " "desktop)." msgstr "" #: share/advertising/29.pl:20 #, c-format msgid "\t* Flexible scheduled updates." msgstr "" #: share/advertising/29.pl:21 #, c-format msgid "" "\t* Management of all your Mandriva Linux systems with one account." msgstr "" #: share/advertising/30.pl:13 #, c-format msgid "Mandriva Expert" msgstr "Mandriva Expert" #: share/advertising/30.pl:15 #, c-format msgid "" "Do you require assistance? Meet Mandriva's technical experts on " "our technical support platform www.mandrivaexpert.com." msgstr "" #: share/advertising/30.pl:17 #, c-format msgid "" "Thanks to the help of qualified Mandriva Linux experts, you will save " "a lot of time." msgstr "" #: share/advertising/30.pl:19 #, c-format msgid "" "For any question related to Mandriva Linux, you have the possibility to " "purchase support incidents at store.mandriva.com." msgstr "" #: share/compssUsers.pl:26 #, c-format msgid "Office Workstation" msgstr "Idora stantsiyasi" #: share/compssUsers.pl:28 #, c-format msgid "" "Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets " "(OpenOffice.org Calc, Kspread), PDF viewers, etc" msgstr "" "Idora uchun dasturlar: matn protsessorlari (OpenOffice.org Writer, Kword), " "elektron jadvallar (OpenOffice.org Calc, Kspread), PDF ko'ruvchilar va hokazo" #: share/compssUsers.pl:29 #, c-format msgid "" "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, " "gnumeric), pdf viewers, etc" msgstr "" "Idora uchun dasturlar: matn protsessorlari (kword, abiword), elektron " "jadvallar (kspread, gnumeric), PDF ko'ruvchilar va hokazo" #: share/compssUsers.pl:34 #, c-format msgid "Game station" msgstr "O'yin stantsiyasi" #: share/compssUsers.pl:35 #, c-format msgid "Amusement programs: arcade, boards, strategy, etc" msgstr "Ovunchoq dasturlar: arkada, stol o'yinlari, strategiya va hokazo" #: share/compssUsers.pl:38 #, c-format msgid "Multimedia station" msgstr "Multimedia stantsiyasi" #: share/compssUsers.pl:39 #, c-format msgid "Sound and video playing/editing programs" msgstr "Audio va videoni o'ynash/tahrirlash uchun dasturlar" #: share/compssUsers.pl:44 #, c-format msgid "Internet station" msgstr "Internet stantsiyasi" #: share/compssUsers.pl:45 #, c-format msgid "" "Set of tools to read and send mail and news (mutt, tin..) and to browse the " "Web" msgstr "" "Xat-xabar, yangiliklarni o'qish va jo'natish (mutt, tin..) va Internetda " "sayr qilish uchun vositalar to'plami" #: share/compssUsers.pl:50 #, c-format msgid "Network Computer (client)" msgstr "Tarmoqdagi kompyuter (klient)" #: share/compssUsers.pl:51 #, c-format msgid "Clients for different protocols including ssh" msgstr "Turli protokollar, shu jumlada SSH, uchun klientlar" #: share/compssUsers.pl:55 #, c-format msgid "Configuration" msgstr "Moslash" #: share/compssUsers.pl:56 #, c-format msgid "Tools to ease the configuration of your computer" msgstr "Kompyuterni moslashni engilashtirish uchun vositalar" #: share/compssUsers.pl:60 #, c-format msgid "Console Tools" msgstr "Konsol vositalari" #: share/compssUsers.pl:61 #, c-format msgid "Editors, shells, file tools, terminals" msgstr "Tahrirchilar, konsollar, fayl vositalari, terminallar" #: share/compssUsers.pl:66 share/compssUsers.pl:170 #, c-format msgid "C and C++ development libraries, programs and include files" msgstr "" #: share/compssUsers.pl:70 share/compssUsers.pl:174 #, c-format msgid "Documentation" msgstr "Qo'llanmalar" #: share/compssUsers.pl:71 share/compssUsers.pl:175 #, c-format msgid "Books and Howto's on Linux and Free Software" msgstr "Linux va erkin dasturlar haqida kitoblar va Howto'lar" #: share/compssUsers.pl:75 share/compssUsers.pl:178 #, c-format msgid "LSB" msgstr "LSB" #: share/compssUsers.pl:76 share/compssUsers.pl:179 #, c-format msgid "Linux Standard Base. Third party applications support" msgstr "" #: share/compssUsers.pl:86 #, c-format msgid "Apache" msgstr "Apache" #: share/compssUsers.pl:89 #, fuzzy, c-format msgid "Groupware" msgstr "Guruh" #: share/compssUsers.pl:90 #, c-format msgid "Kolab Server" msgstr "Kolab serveri" #: share/compssUsers.pl:93 share/compssUsers.pl:134 #, c-format msgid "Firewall/Router" msgstr "Fayervol/Ruter" #: share/compssUsers.pl:94 share/compssUsers.pl:135 #, c-format msgid "Internet gateway" msgstr "Internet geytveyi" #: share/compssUsers.pl:97 #, c-format msgid "Mail/News" msgstr "Xat-xabar/Yangiliklar" #: share/compssUsers.pl:98 #, c-format msgid "Postfix mail server, Inn news server" msgstr "Postfix xat-xabar serveri, Inn yangiliklar serveri" #: share/compssUsers.pl:101 #, c-format msgid "Directory Server" msgstr "Direktoriya serveri" #: share/compssUsers.pl:105 #, c-format msgid "FTP Server" msgstr "FTP serveri" #: share/compssUsers.pl:106 #, c-format msgid "ProFTPd" msgstr "ProFTPd" #: share/compssUsers.pl:109 #, c-format msgid "DNS/NIS" msgstr "DNS/NIS" #: share/compssUsers.pl:110 #, fuzzy, c-format msgid "Domain Name and Network Information Server" msgstr "DNS serveri" #: share/compssUsers.pl:113 #, fuzzy, c-format msgid "File and Printer Sharing Server" msgstr "Bosib chiqarish serveri" #: share/compssUsers.pl:114 #, c-format msgid "NFS Server, Samba server" msgstr "NFS serveri, Samba serveri" #: share/compssUsers.pl:117 share/compssUsers.pl:130 #, c-format msgid "Database" msgstr "Ma'lumot bazasi" #: share/compssUsers.pl:118 #, c-format msgid "PostgreSQL and MySQL Database Server" msgstr "PostgreSQL va MySQL ma'lumot bazasi" #: share/compssUsers.pl:122 #, c-format msgid "Web/FTP" msgstr "Web/FTP" #: share/compssUsers.pl:123 #, c-format msgid "Apache, Pro-ftpd" msgstr "Apache, Pro-ftpd" #: share/compssUsers.pl:126 #, c-format msgid "Mail" msgstr "Xat-xabar" #: share/compssUsers.pl:127 #, c-format msgid "Postfix mail server" msgstr "Postfix xat-xabar serveri" #: share/compssUsers.pl:131 #, c-format msgid "PostgreSQL or MySQL database server" msgstr "PostgreSQL yoki MySQL ma'lumot bazasi" #: share/compssUsers.pl:138 #, c-format msgid "Network Computer server" msgstr "Tarmoqdagi kompyuter (server)" #: share/compssUsers.pl:139 #, c-format msgid "NFS server, SMB server, Proxy server, ssh server" msgstr "NFS serveri, SMB serveri, Proxy serveri, SSH serveri" #: share/compssUsers.pl:147 #, c-format msgid "KDE Workstation" msgstr "KDE stantsiyasi" #: share/compssUsers.pl:148 #, c-format msgid "" "The K Desktop Environment, the basic graphical environment with a collection " "of accompanying tools" msgstr "KDE - vositalar to'plami bilan birga asosiy grafik muhit" #: share/compssUsers.pl:152 #, c-format msgid "GNOME Workstation" msgstr "GNOME stantsiyasi" #: share/compssUsers.pl:153 #, c-format msgid "" "A graphical environment with user-friendly set of applications and desktop " "tools" msgstr "" "Foydalanuvchilar uchun qulay dasturlar va ish stoli vositalaridan iborat " "grafik muhit" #: share/compssUsers.pl:156 #, fuzzy, c-format msgid "IceWm Desktop" msgstr "Ish stoli" #: share/compssUsers.pl:160 #, c-format msgid "Other Graphical Desktops" msgstr "Boshqa grafik ish stollari" #: share/compssUsers.pl:161 #, fuzzy, c-format msgid "Window Maker, Enlightenment, Fvwm, etc" msgstr "Icewm, Window Maker, Enlightenment, Fvwm, va hokazo" #: share/compssUsers.pl:184 #, c-format msgid "Utilities" msgstr "Vositalar" #: share/compssUsers.pl:186 share/compssUsers.pl:187 standalone/logdrake:381 #, c-format msgid "SSH Server" msgstr "SSH serveri" #: share/compssUsers.pl:191 #, c-format msgid "Webmin" msgstr "Webmin" #: share/compssUsers.pl:192 #, fuzzy, c-format msgid "Webmin Remote Configuration Server" msgstr "Terminal serverini moslash" #: share/compssUsers.pl:196 #, c-format msgid "Network Utilities/Monitoring" msgstr "Tarmoq vositalari/Nazorat qilish" #: share/compssUsers.pl:197 #, c-format msgid "Monitoring tools, processes accounting, tcpdump, nmap, ..." msgstr "" #: share/compssUsers.pl:201 #, c-format msgid "Mandriva Wizards" msgstr "Mandriva yordamchilari" #: share/compssUsers.pl:202 #, c-format msgid "Wizards to configure server" msgstr "Serverni moslash uchun yordamchilar" #: standalone.pm:21 #, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2, or (at your option)\n" "any later version.\n" "\n" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software\n" "Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" msgstr "" #: standalone.pm:40 #, c-format msgid "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "Backup and Restore application\n" "\n" "--default : save default directories.\n" "--debug : show all debug messages.\n" "--show-conf : list of files or directories to backup.\n" "--config-info : explain configuration file options (for non-X " "users).\n" "--daemon : use daemon configuration. \n" "--help : show this message.\n" "--version : show version number.\n" msgstr "" #: standalone.pm:52 #, c-format msgid "" "[--boot] [--splash]\n" "OPTIONS:\n" " --boot - enable to configure boot loader\n" " --splash - enable to configure boot theme\n" "default mode: offer to configure autologin feature" msgstr "" #: standalone.pm:57 #, c-format msgid "" "[OPTIONS] [PROGRAM_NAME]\n" "\n" "OPTIONS:\n" " --help - print this help message.\n" " --report - program should be one of Mandriva Linux tools\n" " --incident - program should be one of Mandriva Linux tools" msgstr "" #: standalone.pm:63 #, c-format msgid "" "[--add]\n" " --add - \"add a network interface\" wizard\n" " --del - \"delete a network interface\" wizard\n" " --skip-wizard - manage connections\n" " --internet - configure internet\n" " --wizard - like --add" msgstr "" #: standalone.pm:69 #, c-format msgid "" "\n" "Font Importation and monitoring application\n" "\n" "OPTIONS:\n" "--windows_import : import from all available windows partitions.\n" "--xls_fonts : show all fonts that already exist from xls\n" "--install : accept any font file and any directory.\n" "--uninstall : uninstall any font or any directory of font.\n" "--replace : replace all font if already exist\n" "--application : 0 none application.\n" " : 1 all application available supported.\n" " : name_of_application like so for staroffice \n" " : and gs for ghostscript for only this one." msgstr "" #: standalone.pm:84 #, c-format msgid "" "[OPTIONS]...\n" "Mandriva Linux Terminal Server Configurator\n" "--enable : enable MTS\n" "--disable : disable MTS\n" "--start : start MTS\n" "--stop : stop MTS\n" "--adduser : add an existing system user to MTS (requires username)\n" "--deluser : delete an existing system user from MTS (requires " "username)\n" "--addclient : add a client machine to MTS (requires MAC address, IP, " "nbi image name)\n" "--delclient : delete a client machine from MTS (requires MAC address, " "IP, nbi image name)" msgstr "" #: standalone.pm:96 #, c-format msgid "[keyboard]" msgstr "[tugmatag]" #: standalone.pm:97 #, c-format msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" msgstr "" #: standalone.pm:98 #, c-format msgid "" "[OPTIONS]\n" "Network & Internet connection and monitoring application\n" "\n" "--defaultintf interface : show this interface by default\n" "--connect : connect to internet if not already connected\n" "--disconnect : disconnect to internet if already connected\n" "--force : used with (dis)connect : force (dis)connection.\n" "--status : returns 1 if connected 0 otherwise, then exit.\n" "--quiet : do not be interactive. To be used with (dis)connect." msgstr "" #: standalone.pm:107 #, c-format msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" #: standalone.pm:108 #, c-format msgid "" "[OPTION]...\n" " --no-confirmation do not ask first confirmation question in Mandriva " "Update mode\n" " --no-verify-rpm do not verify packages signatures\n" " --changelog-first display changelog before filelist in the " "description window\n" " --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" msgstr "" #: standalone.pm:113 #, c-format msgid "" "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" "usbtable] [--dynamic=dev]" msgstr "" #: standalone.pm:114 #, c-format msgid "" " [everything]\n" " XFdrake [--noauto] monitor\n" " XFdrake resolution" msgstr "" #: standalone.pm:146 #, c-format msgid "" "\n" "Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " msgstr "" "\n" "Foydalanish: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " #: standalone/XFdrake:59 #, fuzzy, c-format msgid "You need to reboot for changes to take effect" msgstr "" "O'zgarishlar to'liq qo'llanilishi uchun tizimga boshqadan kirishingiz kerak" #: standalone/XFdrake:90 #, c-format msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "Iltimos bu erdan chiqing va Ctrl-Alt-BackSpace tugmalarni bosing" #: standalone/XFdrake:94 #, c-format msgid "You need to log out and back in again for changes to take effect" msgstr "" "O'zgarishlar to'liq qo'llanilishi uchun tizimga boshqadan kirishingiz kerak" #: standalone/drakTermServ:75 #, c-format msgid "Useless without Terminal Server" msgstr "Terminal serverisiz foydasiz" #: standalone/drakTermServ:107 standalone/drakTermServ:113 #, c-format msgid "%s: %s requires a username...\n" msgstr "%s: %s foydalanuvchini talab qiladi...\n" #: standalone/drakTermServ:124 #, c-format msgid "" "%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, " "0/1 for Local Config...\n" msgstr "" #: standalone/drakTermServ:130 #, c-format msgid "%s: %s requires hostname...\n" msgstr "%s: %s kompyuterning nomini talab qiladi...\n" #: standalone/drakTermServ:212 standalone/drakTermServ:215 #, c-format msgid "Terminal Server Configuration" msgstr "Terminal serverini moslash" #: standalone/drakTermServ:221 #, c-format msgid "Enable Server" msgstr "Serverni yoqish" #: standalone/drakTermServ:227 #, c-format msgid "Disable Server" msgstr "Serverni o'chirish" #: standalone/drakTermServ:233 #, c-format msgid "Start Server" msgstr "Serverni ishga tushirish" #: standalone/drakTermServ:239 #, c-format msgid "Stop Server" msgstr "Serverni to'xtatish" #: standalone/drakTermServ:248 #, c-format msgid "Etherboot Floppy/ISO" msgstr "" #: standalone/drakTermServ:252 #, c-format msgid "Net Boot Images" msgstr "" #: standalone/drakTermServ:259 #, c-format msgid "Add/Del Users" msgstr "Foydalanuvchilarni qo'shish/o'chirish" #: standalone/drakTermServ:263 #, c-format msgid "Add/Del Clients" msgstr "Klientlarni qo'shish/o'chirish" #: standalone/drakTermServ:271 #, c-format msgid "Images" msgstr "Rasmlar" #: standalone/drakTermServ:272 #, c-format msgid "Clients/Users" msgstr "" #: standalone/drakTermServ:290 standalone/drakbug:47 #, c-format msgid "First Time Wizard" msgstr "Dastlabki kirish yordamchisi" #: standalone/drakTermServ:326 standalone/drakTermServ:327 #, c-format msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$" msgstr "" #: standalone/drakTermServ:333 #, c-format msgid "" "\n" " This wizard routine will:\n" " \t1) Ask you to select either 'thin' or 'fat' clients.\n" "\t2) Setup DHCP.\n" "\t\n" "After doing these steps, the wizard will:\n" "\t\n" " a) Make all " "nbis. \n" " b) Activate the " "server. \n" " c) Start the " "server. \n" " d) Synchronize the shadow files so that all users, including root, \n" " are added to the shadow$$CLIENT$$ " "file. \n" " e) Ask you to make a boot floppy.\n" " f) If it's thin clients, ask if you want to restart KDM.\n" msgstr "" #: standalone/drakTermServ:378 #, c-format msgid "Cancel Wizard" msgstr "Yordamchini bekor qilish" #: standalone/drakTermServ:393 #, c-format msgid "Please save dhcpd config!" msgstr "" #: standalone/drakTermServ:421 #, c-format msgid "Use thin clients." msgstr "" #: standalone/drakTermServ:423 #, c-format msgid "Sync client X keyboard settings with server." msgstr "" #: standalone/drakTermServ:425 #, c-format msgid "" "Please select default client type.\n" " 'Thin' clients run everything off the server's CPU/RAM, using the client " "display.\n" " 'Fat' clients use their own CPU/RAM but the server's filesystem." msgstr "" #: standalone/drakTermServ:445 #, c-format msgid "Creating net boot images for all kernels" msgstr "" #: standalone/drakTermServ:446 standalone/drakTermServ:766 #: standalone/drakTermServ:782 #, c-format msgid "This will take a few minutes." msgstr "Bu bir necha minut davom etadi." #: standalone/drakTermServ:455 standalone/drakTermServ:496 #, c-format msgid "Done!" msgstr "Tayyor!" #: standalone/drakTermServ:467 standalone/drakTermServ:848 #, c-format msgid "%s failed" msgstr "" #: standalone/drakTermServ:476 #, c-format msgid "" "Not enough space to create\n" "NBIs in %s.\n" "Needed: %d MB, Free: %d MB" msgstr "" #: standalone/drakTermServ:482 #, c-format msgid "Syncing server user list with client list, including root." msgstr "" #: standalone/drakTermServ:502 #, c-format msgid "" "In order to enable changes made for thin clients, the display manager must " "be restarted. Restart now?" msgstr "" #: standalone/drakTermServ:537 #, c-format msgid "Terminal Server Overview" msgstr "" #: standalone/drakTermServ:538 #, c-format msgid "" " - Create Etherboot Enabled Boot Images:\n" " \tTo boot a kernel via etherboot, a special kernel/initrd image must " "be created.\n" " \tmkinitrd-net does much of this work and drakTermServ is just a " "graphical \n" " \tinterface to help manage/customize these images. To create the " "file \n" " \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an " "include in \n" " \tdhcpd.conf, you should create the etherboot images for at least " "one full kernel." msgstr "" #: standalone/drakTermServ:544 #, c-format msgid "" " - Maintain /etc/dhcpd.conf:\n" " \tTo net boot clients, each client needs a dhcpd.conf entry, " "assigning an IP \n" " \taddress and net boot images to the machine. drakTermServ helps " "create/remove \n" " \tthese entries.\n" "\t\t\t\n" " \t(PCI cards may omit the image - etherboot will request the correct " "image. \n" "\t\t\tYou should also consider that when etherboot looks for the images, it " "expects \n" "\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" "\t\t\t \n" " \tA typical dhcpd.conf stanza to support a diskless client looks " "like:" msgstr "" #: standalone/drakTermServ:562 #, c-format msgid "" " While you can use a pool of IP addresses, rather than setup a " "specific entry for\n" " a client machine, using a fixed address scheme facilitates using the " "functionality\n" " of client-specific configuration files that ClusterNFS provides.\n" "\t\t\t\n" " Note: The '#type' entry is only used by drakTermServ. Clients can " "either be 'thin'\n" " or 'fat'. Thin clients run most software on the server via XDMCP, " "while fat clients run \n" " most software on the client machine. A special inittab, %s is\n" " written for thin clients. System config files xdm-config, kdmrc, and " "gdm.conf are \n" " modified if thin clients are used, to enable XDMCP. Since there are " "security issues in \n" " using XDMCP, hosts.deny and hosts.allow are modified to limit access " "to the local\n" " subnet.\n" "\t\t\t\n" " Note: The '#hdw_config' entry is also only used by drakTermServ. " "Clients can either \n" " be 'true' or 'false'. 'true' enables root login at the client " "machine and allows local \n" " hardware configuration of sound, mouse, and X, using the 'drak' " "tools. This is enabled \n" " by creating separate config files associated with the client's IP " "address and creating \n" " read/write mount points to allow the client to alter the file. Once " "you are satisfied \n" " with the configuration, you can remove root login privileges from " "the client.\n" "\t\t\t\n" " Note: You must stop/start the server after adding or changing " "clients." msgstr "" #: standalone/drakTermServ:582 #, c-format msgid "" " - Maintain /etc/exports:\n" " \tClusternfs allows export of the root filesystem to diskless " "clients. drakTermServ\n" " \tsets up the correct entry to allow anonymous access to the root " "filesystem from\n" " \tdiskless clients.\n" "\n" " \tA typical exports entry for clusternfs is:\n" " \t\t\n" " \t/\t\t\t\t\t(ro,all_squash)\n" " \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n" "\t\t\t\n" " \tWith SUBNET/MASK being defined for your network." msgstr "" #: standalone/drakTermServ:594 #, c-format msgid "" " - Maintain %s:\n" " \tFor users to be able to log into the system from a diskless " "client, their entry in\n" " \t/etc/shadow needs to be duplicated in %s. drakTermServ\n" " \thelps in this respect by adding or removing system users from this " "file." msgstr "" #: standalone/drakTermServ:598 #, c-format msgid "" " - Per client %s:\n" " \tThrough clusternfs, each diskless client can have its own unique " "configuration files\n" " \ton the root filesystem of the server. By allowing local client " "hardware configuration, \n" " \tdrakTermServ will help create these files." msgstr "" #: standalone/drakTermServ:603 #, c-format msgid "" " - Per client system configuration files:\n" " \tThrough clusternfs, each diskless client can have its own unique " "configuration files\n" " \ton the root filesystem of the server. By allowing local client " "hardware configuration, \n" " \tclients can customize files such as /etc/modules.conf, /etc/" "sysconfig/mouse, \n" " \t/etc/sysconfig/keyboard on a per-client basis.\n" "\n" " Note: Enabling local client hardware configuration does enable root " "login to the terminal \n" " server on each client machine that has this feature enabled. Local " "configuration can be\n" " turned back off, retaining the configuration files, once the client " "machine is configured." msgstr "" #: standalone/drakTermServ:612 #, c-format msgid "" " - /etc/xinetd.d/tftp:\n" " \tdrakTermServ will configure this file to work in conjunction with " "the images created\n" " \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up " "the boot image to \n" " \teach diskless client.\n" "\n" " \tA typical TFTP configuration file looks like:\n" " \t\t\n" " \tservice tftp\n" "\t\t\t{\n" " disable = no\n" " socket_type = dgram\n" " protocol = udp\n" " wait = yes\n" " user = root\n" " server = /usr/sbin/in.tftpd\n" " server_args = -s /var/lib/tftpboot\n" " \t}\n" " \t\t\n" " \tThe changes here from the default installation are changing the " "disable flag to\n" " \t'no' and changing the directory path to /var/lib/tftpboot, where " "mkinitrd-net\n" " \tputs its images." msgstr "" #: standalone/drakTermServ:633 #, c-format msgid "" " - Create etherboot floppies/CDs:\n" " \tThe diskless client machines need either ROM images on the NIC, or " "a boot floppy\n" " \tor CD to initiate the boot sequence. drakTermServ will help " "generate these\n" " \timages, based on the NIC in the client machine.\n" " \t\t\n" " \tA basic example of creating a boot floppy for a 3Com 3c509 " "manually:\n" " \t\t\n" " \tcat /usr/share/etherboot/zdsk/3c509.zdsk > /dev/fd0" msgstr "" #: standalone/drakTermServ:666 #, c-format msgid "Boot Floppy" msgstr "Tizimni yuklash disketi" #: standalone/drakTermServ:668 #, c-format msgid "Boot ISO" msgstr "" #: standalone/drakTermServ:670 #, c-format msgid "PXE Image" msgstr "PXE rasm" #: standalone/drakTermServ:731 #, c-format msgid "Default kernel version" msgstr "Andoza kernelning versiyasi" #: standalone/drakTermServ:734 #, c-format msgid "Create PXE images." msgstr "" #: standalone/drakTermServ:764 #, c-format msgid "Build Whole Kernel -->" msgstr "" #: standalone/drakTermServ:771 #, c-format msgid "No kernel selected!" msgstr "Hech qanday kernel tanlanmagan!" #: standalone/drakTermServ:774 #, c-format msgid "Build Single NIC -->" msgstr "" #: standalone/drakTermServ:778 #, c-format msgid "No NIC selected!" msgstr "Hech qanday NIC tanlangani yo'q!" #: standalone/drakTermServ:781 #, c-format msgid "Build All Kernels -->" msgstr "" #: standalone/drakTermServ:796 #, c-format msgid "<-- Delete" msgstr "<-- O'chirish" #: standalone/drakTermServ:801 #, fuzzy, c-format msgid "No image selected!" msgstr "Hech qanday NIC tanlangani yo'q!" #: standalone/drakTermServ:804 #, c-format msgid "Delete All NBIs" msgstr "Hamma NBI'larni o'chirish" #: standalone/drakTermServ:966 #, c-format msgid "" "!!! Indicates the password in the system database is different than\n" " the one in the Terminal Server database.\n" "Delete/re-add the user to the Terminal Server to enable login." msgstr "" #: standalone/drakTermServ:971 #, c-format msgid "Add User -->" msgstr "Foydalanuvchini qo'shish -->" #: standalone/drakTermServ:977 #, c-format msgid "<-- Del User" msgstr "<-- Foydalanuvchini o'chirish" #: standalone/drakTermServ:1013 #, c-format msgid "type: %s" msgstr "turi: %s" #: standalone/drakTermServ:1017 #, c-format msgid "local config: %s" msgstr "" #: standalone/drakTermServ:1047 #, c-format msgid "" "Allow local hardware\n" "configuration." msgstr "" #: standalone/drakTermServ:1056 #, c-format msgid "No net boot images created!" msgstr "" #: standalone/drakTermServ:1075 #, c-format msgid "Thin Client" msgstr "" #: standalone/drakTermServ:1079 #, c-format msgid "Allow Thin Clients" msgstr "" #: standalone/drakTermServ:1080 #, c-format msgid "" "Sync client X keyboard\n" " settings with server." msgstr "" #: standalone/drakTermServ:1081 #, c-format msgid "Add Client -->" msgstr "Klientni qo'shish -->" #: standalone/drakTermServ:1095 #, c-format msgid "type: fat" msgstr "turi: fat" #: standalone/drakTermServ:1096 #, c-format msgid "type: thin" msgstr "" #: standalone/drakTermServ:1103 #, c-format msgid "local config: false" msgstr "" #: standalone/drakTermServ:1104 #, c-format msgid "local config: true" msgstr "" #: standalone/drakTermServ:1112 #, c-format msgid "<-- Edit Client" msgstr "<-- Klientni tuzatish" #: standalone/drakTermServ:1138 #, c-format msgid "Disable Local Config" msgstr "" #: standalone/drakTermServ:1145 #, c-format msgid "Delete Client" msgstr "Klientni o'chirish" #: standalone/drakTermServ:1154 #, c-format msgid "dhcpd Config..." msgstr "dhcpd'ni moslash" #: standalone/drakTermServ:1169 #, c-format msgid "" "Need to restart the Display Manager for full changes to take effect. \n" "(service dm restart - at the console)" msgstr "" "O'zgarishlarni qo'llash uchun oynalar boshqaruvchisi boshqadan ishga " "tushirilishi kerak.\n" "(service dm restart - konsolda)" #: standalone/drakTermServ:1214 #, c-format msgid "Thin clients will not work with autologin. Disable autologin?" msgstr "" #: standalone/drakTermServ:1230 #, c-format msgid "All clients will use %s" msgstr "" #: standalone/drakTermServ:1264 #, c-format msgid "Subnet:" msgstr "" #: standalone/drakTermServ:1271 #, c-format msgid "Netmask:" msgstr "Tarmoq maskasi:" #: standalone/drakTermServ:1278 #, c-format msgid "Routers:" msgstr "Ruterlar:" #: standalone/drakTermServ:1285 #, c-format msgid "Subnet Mask:" msgstr "" #: standalone/drakTermServ:1292 #, c-format msgid "Broadcast Address:" msgstr "" #: standalone/drakTermServ:1299 #, c-format msgid "Domain Name:" msgstr "" #: standalone/drakTermServ:1307 #, c-format msgid "Name Servers:" msgstr "Nom serverlari:" #: standalone/drakTermServ:1318 #, c-format msgid "IP Range Start:" msgstr "IP chegarasining boshi:" #: standalone/drakTermServ:1319 #, c-format msgid "IP Range End:" msgstr "IP chegarasining oxiri:" #: standalone/drakTermServ:1361 #, c-format msgid "Append TS Includes To Existing Config" msgstr "" #: standalone/drakTermServ:1363 #, c-format msgid "Write Config" msgstr "Moslamani yozish" #: standalone/drakTermServ:1379 #, c-format msgid "dhcpd Server Configuration" msgstr "dhcpd serverini moslash" #: standalone/drakTermServ:1380 #, c-format msgid "" "Most of these values were extracted\n" "from your running system.\n" "You can modify as needed." msgstr "" #: standalone/drakTermServ:1383 #, c-format msgid "" "Dynamic IP Address Pool\n" "(needed for PXE clients):" msgstr "" #: standalone/drakTermServ:1536 #, c-format msgid "Write to %s failed!" msgstr "" #: standalone/drakTermServ:1548 #, c-format msgid "Please insert floppy disk:" msgstr "Iltimos disketni qo'ying:" #: standalone/drakTermServ:1552 #, c-format msgid "Could not access the floppy!" msgstr "" #: standalone/drakTermServ:1554 #, c-format msgid "Floppy can be removed now" msgstr "Disketni endi olishingiz mumkin" #: standalone/drakTermServ:1557 #, c-format msgid "No floppy drive available!" msgstr "Disket uskunasi mavjud emas!" #: standalone/drakTermServ:1563 #, c-format msgid "PXE image is %s/%s" msgstr "PXE rasmi: %s/%s" #: standalone/drakTermServ:1565 #, c-format msgid "Error writing %s/%s" msgstr "%s/%s yozishda xato" #: standalone/drakTermServ:1575 #, c-format msgid "Etherboot ISO image is %s" msgstr "Etherboot ISO tasviri: %s" #: standalone/drakTermServ:1577 #, c-format msgid "Something went wrong! - Is mkisofs installed?" msgstr "" #: standalone/drakTermServ:1598 #, c-format msgid "Need to create /etc/dhcpd.conf first!" msgstr "Avvalo /etc/dhcpd.conf faylini yaratish kerak!" #: standalone/drakTermServ:1757 #, c-format msgid "%s passwd bad in Terminal Server - rewriting...\n" msgstr "" #: standalone/drakTermServ:1770 #, c-format msgid "%s is not a user..\n" msgstr "%s foydalanuvchi emas\n" #: standalone/drakTermServ:1771 #, c-format msgid "%s is already a Terminal Server user\n" msgstr "%s allaqachon terminal server foydalanuvchisi\n" #: standalone/drakTermServ:1773 #, c-format msgid "Addition of %s to Terminal Server failed!\n" msgstr "" #: standalone/drakTermServ:1775 #, c-format msgid "%s added to Terminal Server\n" msgstr "%s terminal serveriga qo'shildi\n" #: standalone/drakTermServ:1792 #, c-format msgid "Deleted %s...\n" msgstr "%s o'chirildi\n" #: standalone/drakTermServ:1794 standalone/drakTermServ:1867 #, c-format msgid "%s not found...\n" msgstr "%s topilmadi...\n" #: standalone/drakTermServ:1895 #, c-format msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed" msgstr "" "/etc/hosts.allow va /etc/hosts.deny fayllari allaqachon moslangan - " "o'zgartirilmadi" #: standalone/drakTermServ:2035 #, c-format msgid "Configuration changed - restart clusternfs/dhcpd?" msgstr "" "Moslama o'zgardi. clusternfs/dhcpd xizmati boshqadan ishga tushirilsinmi?" #: standalone/drakautoinst:38 standalone/drakhosts:118 #: standalone/drakhosts:125 standalone/draknfs:86 standalone/draknfs:107 #: standalone/draknfs:460 standalone/draknfs:462 standalone/draknfs:552 #: standalone/draknfs:559 #, c-format msgid "Error!" msgstr "Xato!" #: standalone/drakautoinst:39 #, c-format msgid "I can not find needed image file `%s'." msgstr "Kerak bo'lgan \"%s\" tasvir faylini topib bo'lmadi." #: standalone/drakautoinst:41 #, c-format msgid "Auto Install Configurator" msgstr "" #: standalone/drakautoinst:42 #, c-format msgid "" "You are about to configure an Auto Install floppy. This feature is somewhat " "dangerous and must be used circumspectly.\n" "\n" "With that feature, you will be able to replay the installation you've " "performed on this computer, being interactively prompted for some steps, in " "order to change their values.\n" "\n" "For maximum safety, the partitioning and formatting will never be performed " "automatically, whatever you chose during the install of this computer.\n" "\n" "Press ok to continue." msgstr "" #: standalone/drakautoinst:60 #, c-format msgid "replay" msgstr "qaytarish" #: standalone/drakautoinst:60 standalone/drakautoinst:69 #, c-format msgid "manual" msgstr "" #: standalone/drakautoinst:64 #, c-format msgid "Automatic Steps Configuration" msgstr "Avtomatik bosqichlarni moslash" #: standalone/drakautoinst:65 #, c-format msgid "" "Please choose for each step whether it will replay like your install, or it " "will be manual" msgstr "" #: standalone/drakautoinst:77 standalone/drakautoinst:78 #: standalone/drakautoinst:92 #, c-format msgid "Creating auto install floppy" msgstr "Avto-o'rnatish disketi yaratilmoqda" #: standalone/drakautoinst:90 #, c-format msgid "Insert another blank floppy in drive %s (for drivers disk)" msgstr "Bo'sh disketni %s uskunasiga qo'ying (drayverlar disketi)" #: standalone/drakautoinst:91 #, c-format msgid "Creating auto install floppy (drivers disk)" msgstr "Avto-o'rnatish disketi yaratilmoqda (drayverlar disketi)" #: standalone/drakautoinst:156 #, c-format msgid "" "\n" "Welcome.\n" "\n" "The parameters of the auto-install are available in the sections on the left" msgstr "" "\n" "Marhamat.\n" "\n" "Avtomatik ravishda o'rnatishning parametrlari chap tarafdagi bo'limlarda " "mavjud" #: standalone/drakautoinst:251 #, c-format msgid "" "The floppy has been successfully generated.\n" "You may now replay your installation." msgstr "" "Disket muvaffaqiyatli yaratildi.\n" "Endi, o'rnatishni qaytarishingiz mumkin." #: standalone/drakautoinst:287 #, c-format msgid "Auto Install" msgstr "Avto-o'rnatish" #: standalone/drakautoinst:356 #, c-format msgid "Add an item" msgstr "Bandni qo'shish" #: standalone/drakautoinst:363 #, c-format msgid "Remove the last item" msgstr "Oxirgi bandni olib tashlash" #: standalone/drakbackup:153 #, c-format msgid "" "Expect is an extension to the TCL scripting language that allows interactive " "sessions without user intervention." msgstr "" #: standalone/drakbackup:154 #, c-format msgid "Store the password for this system in drakbackup configuration." msgstr "Bu tizim uchun maxfiy so'zni DrakBackup moslamasida saqlash." #: standalone/drakbackup:155 #, c-format msgid "" "For a multisession CD, only the first session will erase the cdrw. Otherwise " "the cdrw is erased before each backup." msgstr "" #: standalone/drakbackup:156 #, c-format msgid "" "This option will save files that have changed. Exact behavior depends on " "whether incremental or differential mode is used." msgstr "" #: standalone/drakbackup:157 #, c-format msgid "" "Incremental backups only save files that have changed or are new since the " "last backup." msgstr "" #: standalone/drakbackup:158 #, c-format msgid "" "Differential backups only save files that have changed or are new since the " "original 'base' backup." msgstr "" #: standalone/drakbackup:159 #, c-format msgid "" "This should be a local user or email address that you want the backup " "results sent to. You will need to define a functioning mail server." msgstr "" #: standalone/drakbackup:160 #, c-format msgid "" "This should be the return address that you want the backup results sent " "from. Default is drakbackup." msgstr "" #: standalone/drakbackup:161 #, c-format msgid "" "Files or wildcards listed in a .backupignore file at the top of a directory " "tree will not be backed up." msgstr "" #: standalone/drakbackup:162 #, c-format msgid "" "For backups to other media, files are still created on the hard drive, then " "moved to the other media. Enabling this option will remove the hard drive " "tar files after the backup." msgstr "" #: standalone/drakbackup:163 #, c-format msgid "" "Some protocols, like rsync, may be configured at the server end. Rather " "than using a directory path, you would use the 'module' name for the service " "path." msgstr "" #: standalone/drakbackup:164 #, c-format msgid "" "Custom allows you to specify your own day and time. The other options use " "run-parts in /etc/crontab." msgstr "" #: standalone/drakbackup:327 #, c-format msgid "No media selected for cron operation." msgstr "" #: standalone/drakbackup:331 #, c-format msgid "No interval selected for cron operation." msgstr "" #: standalone/drakbackup:378 #, c-format msgid "Interval cron not available as non-root" msgstr "" #: standalone/drakbackup:465 standalone/logdrake:437 #, c-format msgid "\"%s\" neither is a valid email nor is an existing local user!" msgstr "\"%s\" na haqiqiy elektron pochta na mavjud lokal foydalanuvchi!" #: standalone/drakbackup:469 standalone/logdrake:442 #, c-format msgid "" "\"%s\" is a local user, but you did not select a local smtp, so you must use " "a complete email address!" msgstr "" #: standalone/drakbackup:478 #, c-format msgid "Valid user list changed, rewriting config file." msgstr "" #: standalone/drakbackup:480 #, c-format msgid "Old user list:\n" msgstr "Foydalanuvchilarning eski ro'yxati:\n" #: standalone/drakbackup:482 #, c-format msgid "New user list:\n" msgstr "Foydalanuvchilarning eski ro'yxati\n" #: standalone/drakbackup:511 #, c-format msgid "" "\n" " DrakBackup Report \n" msgstr "" "\n" " DrakBackup hisoboti \n" #: standalone/drakbackup:512 #, c-format msgid "" "\n" " DrakBackup Daemon Report\n" msgstr "" #: standalone/drakbackup:518 #, c-format msgid "" "\n" " DrakBackup Report Details\n" "\n" "\n" msgstr "" "\n" " DrakBackup hisobotining tafsilotlari\n" "\n" "\n" #: standalone/drakbackup:543 standalone/drakbackup:614 #: standalone/drakbackup:670 #, c-format msgid "Total progress" msgstr "" #: standalone/drakbackup:596 #, c-format msgid "" "%s exists, delete?\n" "\n" "If you've already done this process you'll probably\n" " need to purge the entry from authorized_keys on the server." msgstr "" #: standalone/drakbackup:605 #, c-format msgid "This may take a moment to generate the keys." msgstr "Kalitlarni yaratish bir oz vaqtni olishi mumkin." #: standalone/drakbackup:612 #, c-format msgid "Cannot spawn %s." msgstr "" #: standalone/drakbackup:629 #, c-format msgid "No password prompt on %s at port %s" msgstr "" #: standalone/drakbackup:630 #, c-format msgid "Bad password on %s" msgstr "" #: standalone/drakbackup:631 #, c-format msgid "Permission denied transferring %s to %s" msgstr "" #: standalone/drakbackup:632 #, c-format msgid "Can not find %s on %s" msgstr "%s'ni %s'da topib bo'lmadi." #: standalone/drakbackup:636 #, c-format msgid "%s not responding" msgstr "%s javob bermayapti" #: standalone/drakbackup:640 #, c-format msgid "" "Transfer successful\n" "You may want to verify you can login to the server with:\n" "\n" "ssh -i %s %s@%s\n" "\n" "without being prompted for a password." msgstr "" #: standalone/drakbackup:690 #, c-format msgid "No CD-R/DVD-R in drive!" msgstr "Uskunada CDR/DVDR yo'q!" #: standalone/drakbackup:694 #, c-format msgid "Does not appear to be recordable media!" msgstr "Yozish mumkin bo'lgan ma'lumot tashuvchiga o'xshamaydi!" #: standalone/drakbackup:699 #, c-format msgid "Not erasable media!" msgstr "O'chirib bo'lmaydigan ma'lumot tashuvchi!" #: standalone/drakbackup:741 #, c-format msgid "This may take a moment to erase the media." msgstr "" #: standalone/drakbackup:799 #, c-format msgid "Permission problem accessing CD." msgstr "" #: standalone/drakbackup:826 #, c-format msgid "No tape in %s!" msgstr "%s'da magnit tasma yo'q!" #: standalone/drakbackup:932 #, c-format msgid "" "Backup destination quota exceeded!\n" "%d MB used vs %d MB allocated." msgstr "" #: standalone/drakbackup:951 standalone/drakbackup:983 #, c-format msgid "Backup system files..." msgstr "" #: standalone/drakbackup:984 standalone/drakbackup:1024 #, c-format msgid "Hard Disk Backup files..." msgstr "" #: standalone/drakbackup:1023 #, c-format msgid "Backup User files..." msgstr "" #: standalone/drakbackup:1057 #, c-format msgid "Backup Other files..." msgstr "" #: standalone/drakbackup:1058 #, c-format msgid "Hard Disk Backup Progress..." msgstr "" #: standalone/drakbackup:1063 #, c-format msgid "No changes to backup!" msgstr "" #: standalone/drakbackup:1080 standalone/drakbackup:1103 #, c-format msgid "" "\n" "Drakbackup activities via %s:\n" "\n" msgstr "" #: standalone/drakbackup:1089 #, c-format msgid "" "\n" " FTP connection problem: It was not possible to send your backup files by " "FTP.\n" msgstr "" #: standalone/drakbackup:1090 #, c-format msgid "" "Error during sending file via FTP. Please correct your FTP configuration." msgstr "" "Faylni FTP orqali jo'natishda xato ro'y berdi. Iltimos FTP moslamalaringizni " "to'g'rilang." #: standalone/drakbackup:1092 #, c-format msgid "file list sent by FTP: %s\n" msgstr "FTP orqali jo'natilgan fayllarning ro'yxati: %s\n" #: standalone/drakbackup:1108 #, c-format msgid "" "\n" "Drakbackup activities via CD:\n" "\n" msgstr "" #: standalone/drakbackup:1113 #, c-format msgid "" "\n" "Drakbackup activities via tape:\n" "\n" msgstr "" #: standalone/drakbackup:1122 #, c-format msgid "Error sending mail. Your report mail was not sent." msgstr "" #: standalone/drakbackup:1123 #, c-format msgid " Error while sending mail. \n" msgstr " Xatni jo'natishda xato ro'y berdi. \n" #: standalone/drakbackup:1153 #, c-format msgid "Can not create catalog!" msgstr "Katalogni yaratib bo'lmadi!" #: standalone/drakbackup:1394 #, c-format msgid "" "\n" "Please check all options that you need.\n" msgstr "" "\n" "Sizga kerak bo'lgan parametrlarni tekshiring.\n" #: standalone/drakbackup:1395 #, c-format msgid "" "These options can backup and restore all files in your /etc directory.\n" msgstr "" #: standalone/drakbackup:1396 #, c-format msgid "Backup your System files. (/etc directory)" msgstr "" #: standalone/drakbackup:1397 standalone/drakbackup:1461 #: standalone/drakbackup:1527 #, c-format msgid "Use Incremental/Differential Backups (do not replace old backups)" msgstr "" #: standalone/drakbackup:1399 standalone/drakbackup:1463 #: standalone/drakbackup:1529 #, c-format msgid "Use Incremental Backups" msgstr "" #: standalone/drakbackup:1399 standalone/drakbackup:1463 #: standalone/drakbackup:1529 #, c-format msgid "Use Differential Backups" msgstr "" #: standalone/drakbackup:1401 #, c-format msgid "Do not include critical files (passwd, group, fstab)" msgstr "" #: standalone/drakbackup:1402 #, c-format msgid "" "With this option you will be able to restore any version\n" " of your /etc directory." msgstr "" "Bu parametr orqali /etc direktoriyangizning istagan versiyasini\n" "tiklashingiz mumkin." #: standalone/drakbackup:1433 #, c-format msgid "Please check all users that you want to include in your backup." msgstr "" #: standalone/drakbackup:1460 #, c-format msgid "Do not include the browser cache" msgstr "Bauzerning keshini kiritmash" #: standalone/drakbackup:1514 #, c-format msgid "Select the files or directories and click on 'OK'" msgstr "Fayllarni yoki direktoriyalarni tanlang va \"Ok\" tugmasini bosing" #: standalone/drakbackup:1515 standalone/drakfont:657 #, c-format msgid "Remove Selected" msgstr "Tanlanganni olib tashlash" #: standalone/drakbackup:1578 #, c-format msgid "Users" msgstr "Foydalanuvchilar" #: standalone/drakbackup:1598 #, c-format msgid "Use network connection to backup" msgstr "" #: standalone/drakbackup:1600 #, c-format msgid "Net Method:" msgstr "Tarmoq usuli:" #: standalone/drakbackup:1604 #, c-format msgid "Use Expect for SSH" msgstr "" #: standalone/drakbackup:1605 #, c-format msgid "Create/Transfer backup keys for SSH" msgstr "" #: standalone/drakbackup:1607 #, c-format msgid "Transfer Now" msgstr "Uzatish" #: standalone/drakbackup:1609 #, c-format msgid "Other (not drakbackup) keys in place already" msgstr "" #: standalone/drakbackup:1612 #, c-format msgid "Host name or IP." msgstr "Kompyuterning nomi yoki IP raqami" #: standalone/drakbackup:1617 #, c-format msgid "Directory (or module) to put the backup on this host." msgstr "" #: standalone/drakbackup:1629 #, c-format msgid "Remember this password" msgstr "Bu maxfiy so'zni eslab qolish" #: standalone/drakbackup:1645 #, c-format msgid "Need hostname, username and password!" msgstr "Kompyuterning nomi, foydalanuvchi va maxfiy so'z kerak!" #: standalone/drakbackup:1736 #, c-format msgid "Use CD-R/DVD-R to backup" msgstr "" #: standalone/drakbackup:1739 #, c-format msgid "Choose your CD/DVD device" msgstr "Kompakt-disk/DVD uskunasini tanlang (Mb)" #: standalone/drakbackup:1744 #, c-format msgid "Choose your CD/DVD media size" msgstr "Kompakt-disk/DVD'ning hajmini tanlang" #: standalone/drakbackup:1751 #, c-format msgid "Multisession CD" msgstr "Ko'p seansli kompakt-disk" #: standalone/drakbackup:1753 #, c-format msgid "CDRW media" msgstr "" #: standalone/drakbackup:1759 #, c-format msgid "Erase your RW media (1st Session)" msgstr "" #: standalone/drakbackup:1760 #, c-format msgid " Erase Now " msgstr " Darhol o'chirish " #: standalone/drakbackup:1766 #, c-format msgid "DVD+RW media" msgstr "" #: standalone/drakbackup:1768 #, c-format msgid "DVD-R media" msgstr "" #: standalone/drakbackup:1770 #, c-format msgid "DVDRAM device" msgstr "DVDRAM uskuna" #: standalone/drakbackup:1801 #, c-format msgid "No CD device defined!" msgstr "Kompakt-disk uskunasi aniqlanmagan!" #: standalone/drakbackup:1843 #, c-format msgid "Use tape to backup" msgstr "" #: standalone/drakbackup:1846 #, c-format msgid "Device name to use for backup" msgstr "" #: standalone/drakbackup:1852 #, c-format msgid "Backup directly to tape" msgstr "" #: standalone/drakbackup:1858 #, c-format msgid "Do not rewind tape after backup" msgstr "" #: standalone/drakbackup:1864 #, c-format msgid "Erase tape before backup" msgstr "" #: standalone/drakbackup:1870 #, c-format msgid "Eject tape after the backup" msgstr "" #: standalone/drakbackup:1946 #, c-format msgid "Enter the directory to save to:" msgstr "Saqlash uchun direktoriyani kiriting:" #: standalone/drakbackup:1950 #, c-format msgid "Directory to save to" msgstr "Saqlash uchun direktoriya" #: standalone/drakbackup:1955 #, c-format msgid "" "Maximum disk space\n" " allocated for backups (MB)" msgstr "" #: standalone/drakbackup:1959 #, c-format msgid "" "Delete incremental or differential\n" " backups older than N days\n" " (0 is keep all backups) to save space" msgstr "" #: standalone/drakbackup:2026 #, c-format msgid "CD-R / DVD-R" msgstr "Kompakt-disk / DVDROM" #: standalone/drakbackup:2031 #, c-format msgid "HardDrive / NFS" msgstr "Qatiq disk / NFS" #: standalone/drakbackup:2046 standalone/drakbackup:2047 #: standalone/drakbackup:2052 #, c-format msgid "hourly" msgstr "har soat" #: standalone/drakbackup:2046 standalone/drakbackup:2048 #: standalone/drakbackup:2053 #, c-format msgid "daily" msgstr "har kun" #: standalone/drakbackup:2046 standalone/drakbackup:2049 #: standalone/drakbackup:2054 #, c-format msgid "weekly" msgstr "har hafta" #: standalone/drakbackup:2046 standalone/drakbackup:2050 #: standalone/drakbackup:2055 #, c-format msgid "monthly" msgstr "har oy" #: standalone/drakbackup:2046 standalone/drakbackup:2051 #: standalone/drakbackup:2056 #, c-format msgid "custom" msgstr "boshqa" #: standalone/drakbackup:2060 #, c-format msgid "January" msgstr "Yanvar" #: standalone/drakbackup:2060 #, c-format msgid "February" msgstr "Fevral" #: standalone/drakbackup:2060 #, c-format msgid "March" msgstr "Mart" #: standalone/drakbackup:2061 #, c-format msgid "April" msgstr "Aprel" #: standalone/drakbackup:2061 #, c-format msgid "May" msgstr "May" #: standalone/drakbackup:2061 #, c-format msgid "June" msgstr "Iyun" #: standalone/drakbackup:2061 #, c-format msgid "July" msgstr "Iyul" #: standalone/drakbackup:2061 #, c-format msgid "August" msgstr "Avgust" #: standalone/drakbackup:2061 #, c-format msgid "September" msgstr "Sentyabr" #: standalone/drakbackup:2062 #, c-format msgid "October" msgstr "Oktyabr" #: standalone/drakbackup:2062 #, c-format msgid "November" msgstr "Noyabr" #: standalone/drakbackup:2062 #, c-format msgid "December" msgstr "Dekabr" #: standalone/drakbackup:2065 #, c-format msgid "Sunday" msgstr "Yakshanba" #: standalone/drakbackup:2065 #, c-format msgid "Monday" msgstr "Dushanba" #: standalone/drakbackup:2065 #, c-format msgid "Tuesday" msgstr "Seshanba" #: standalone/drakbackup:2066 #, c-format msgid "Wednesday" msgstr "Chorshanba" #: standalone/drakbackup:2066 #, c-format msgid "Thursday" msgstr "Payshanba" #: standalone/drakbackup:2066 #, c-format msgid "Friday" msgstr "Juma" #: standalone/drakbackup:2066 #, c-format msgid "Saturday" msgstr "Shanba" #: standalone/drakbackup:2098 #, c-format msgid "Use daemon" msgstr "Demondan foydalanish" #: standalone/drakbackup:2102 #, c-format msgid "Please choose the time interval between each backup" msgstr "" #: standalone/drakbackup:2108 #, c-format msgid "Custom setup/crontab entry:" msgstr "" #: standalone/drakbackup:2113 #, c-format msgid "Minute" msgstr "Minut" #: standalone/drakbackup:2117 #, c-format msgid "Hour" msgstr "Soat" #: standalone/drakbackup:2121 #, c-format msgid "Day" msgstr "Kun" #: standalone/drakbackup:2125 #, c-format msgid "Month" msgstr "Oy" #: standalone/drakbackup:2129 #, c-format msgid "Weekday" msgstr "Havta kuni" #: standalone/drakbackup:2135 #, c-format msgid "Please choose the media for backup." msgstr "" #: standalone/drakbackup:2141 #, c-format msgid "Please be sure that the cron daemon is included in your services." msgstr "" #: standalone/drakbackup:2142 #, c-format msgid "" "If your machine is not on all the time, you might want to install anacron." msgstr "" #: standalone/drakbackup:2143 #, c-format msgid "Note that currently all 'net' media also use the hard drive." msgstr "" #: standalone/drakbackup:2190 #, c-format msgid "Please choose the compression type" msgstr "" #: standalone/drakbackup:2194 #, c-format msgid "Use .backupignore files" msgstr "" #: standalone/drakbackup:2196 #, c-format msgid "Send mail report after each backup to:" msgstr "" #: standalone/drakbackup:2202 #, c-format msgid "Return address for sent mail:" msgstr "" #: standalone/drakbackup:2208 #, c-format msgid "SMTP server for mail:" msgstr "Xat-xabar uchun SMTP serveri:" #: standalone/drakbackup:2213 #, c-format msgid "Delete Hard Drive tar files after backup to other media." msgstr "" #: standalone/drakbackup:2256 #, c-format msgid "What" msgstr "Nima" #: standalone/drakbackup:2261 #, c-format msgid "Where" msgstr "Qaerda" #: standalone/drakbackup:2266 #, c-format msgid "When" msgstr "Qachon" #: standalone/drakbackup:2271 #, c-format msgid "More Options" msgstr "Qo'shimcha parametrlar" #: standalone/drakbackup:2284 #, c-format msgid "Backup destination not configured..." msgstr "" #: standalone/drakbackup:2304 standalone/drakbackup:4228 #, c-format msgid "Drakbackup Configuration" msgstr "Drakbackup moslamasi" #: standalone/drakbackup:2320 #, c-format msgid "Please choose where you want to backup" msgstr "" #: standalone/drakbackup:2323 #, c-format msgid "Hard Drive used to prepare backups for all media" msgstr "" #: standalone/drakbackup:2323 #, c-format msgid "Across Network" msgstr "Tarmoq orqali" #: standalone/drakbackup:2323 #, c-format msgid "On CD-R" msgstr "Kompakt-diskga" #: standalone/drakbackup:2323 #, c-format msgid "On Tape Device" msgstr "Magnit tasma uskunasiga" #: standalone/drakbackup:2369 #, c-format msgid "Backup Users" msgstr "" #: standalone/drakbackup:2370 #, c-format msgid " (Default is all users)" msgstr " (andoza: hamma foydalanuvchilar)" #: standalone/drakbackup:2383 #, c-format msgid "Please choose what you want to backup" msgstr "" #: standalone/drakbackup:2384 #, c-format msgid "Backup System" msgstr "" #: standalone/drakbackup:2386 #, c-format msgid "Select user manually" msgstr "" #: standalone/drakbackup:2415 #, c-format msgid "Please select data to backup..." msgstr "" #: standalone/drakbackup:2487 #, c-format msgid "" "\n" "Backup Sources: \n" msgstr "" #: standalone/drakbackup:2488 #, c-format msgid "" "\n" "- System Files:\n" msgstr "" "\n" "- Tizimning fayllari:\n" #: standalone/drakbackup:2490 #, c-format msgid "" "\n" "- User Files:\n" msgstr "" "\n" "- Foydalanuvchining fayllari:\n" #: standalone/drakbackup:2492 #, c-format msgid "" "\n" "- Other Files:\n" msgstr "" "\n" "- Boshqa fayllar:\n" #: standalone/drakbackup:2494 #, c-format msgid "" "\n" "- Save on Hard drive on path: %s\n" msgstr "" #: standalone/drakbackup:2495 #, c-format msgid "\tLimit disk usage to %s MB\n" msgstr "" #: standalone/drakbackup:2496 #, c-format msgid "\tDelete backups older than %s day(s)\n" msgstr "" #: standalone/drakbackup:2499 #, c-format msgid "" "\n" "- Delete hard drive tar files after backup.\n" msgstr "" #: standalone/drakbackup:2504 #, c-format msgid "" "\n" "- Burn to CD" msgstr "" "\n" "- Kompakt-diskga yozish" #: standalone/drakbackup:2505 #, c-format msgid "RW" msgstr "" #: standalone/drakbackup:2506 #, c-format msgid " on device: %s" msgstr " Uskunaga: %s" #: standalone/drakbackup:2507 #, c-format msgid " (multi-session)" msgstr " (ko'p seansli)" #: standalone/drakbackup:2508 #, c-format msgid "" "\n" "- Save to Tape on device: %s" msgstr "" "\n" "- %s uskunadagi magnit tasmaga saqlash" #: standalone/drakbackup:2509 #, c-format msgid "\t\tErase=%s" msgstr "\t\tO'chirish=%s" #: standalone/drakbackup:2511 #, c-format msgid "\tBackup directly to Tape\n" msgstr "" #: standalone/drakbackup:2513 #, c-format msgid "" "\n" "- Save via %s on host: %s\n" msgstr "" "\n" "- %s orqali %s xostida saqlash\n" #: standalone/drakbackup:2514 #, c-format msgid "" "\t\t user name: %s\n" "\t\t on path: %s \n" msgstr "" "\t\t foydalanuvchi: %s\n" "\t\t direktoriya: %s\n" #: standalone/drakbackup:2515 #, c-format msgid "" "\n" "- Options:\n" msgstr "" "\n" "- Parametrlar:\n" #: standalone/drakbackup:2516 #, c-format msgid "\tDo not include System Files\n" msgstr "\tTizimning fayllarini kiritmash\n" #: standalone/drakbackup:2518 #, c-format msgid "\tBackups use tar and bzip2\n" msgstr "" #: standalone/drakbackup:2519 #, c-format msgid "\tBackups use tar and gzip\n" msgstr "" #: standalone/drakbackup:2520 #, c-format msgid "\tBackups use tar only\n" msgstr "" #: standalone/drakbackup:2522 #, c-format msgid "\tUse .backupignore files\n" msgstr "" #: standalone/drakbackup:2523 #, c-format msgid "\tSend mail to %s\n" msgstr "\t%s'ga xat jo'natish\n" #: standalone/drakbackup:2524 #, c-format msgid "\tSend mail from %s\n" msgstr "" #: standalone/drakbackup:2525 #, c-format msgid "\tUsing SMTP server %s\n" msgstr "\t %s SMTP serveri yordamida\n" #: standalone/drakbackup:2527 #, c-format msgid "" "\n" "- Daemon, %s via:\n" msgstr "" #: standalone/drakbackup:2528 #, c-format msgid "\t-Hard drive.\n" msgstr "\t-Qattiq disk.\n" #: standalone/drakbackup:2529 #, c-format msgid "\t-CD-R.\n" msgstr "\t-Kompakt-disk.\n" #: standalone/drakbackup:2530 #, c-format msgid "\t-Tape \n" msgstr "\t-Magnit tasma \n" #: standalone/drakbackup:2531 #, c-format msgid "\t-Network by FTP.\n" msgstr "\t-Tarmoq FTP orqali.\n" #: standalone/drakbackup:2532 #, c-format msgid "\t-Network by SSH.\n" msgstr "\t-Tarmoq SSH orqali.\n" #: standalone/drakbackup:2533 #, c-format msgid "\t-Network by rsync.\n" msgstr "\t-Tarmoq rsync orqali.\n" #: standalone/drakbackup:2535 #, c-format msgid "No configuration, please click Wizard or Advanced.\n" msgstr "" #: standalone/drakbackup:2540 #, c-format msgid "" "List of data to restore:\n" "\n" msgstr "" "Tiklash uchun ma'lumotlar ro'yxati:\n" "\n" #: standalone/drakbackup:2542 #, c-format msgid "- Restore System Files.\n" msgstr "- Tizimning fayllarini tiklash:\n" #: standalone/drakbackup:2544 standalone/drakbackup:2554 #, c-format msgid " - from date: %s %s\n" msgstr "" #: standalone/drakbackup:2547 #, c-format msgid "- Restore User Files: \n" msgstr "- Foydalanuvchining fayllarini tiklash:\n" #: standalone/drakbackup:2552 #, c-format msgid "- Restore Other Files: \n" msgstr "- Boshqa fayllarni tiklash:\n" #: standalone/drakbackup:2731 #, c-format msgid "" "List of data corrupted:\n" "\n" msgstr "" "Buzuq ma'lumotning ro'yxati:\n" "\n" #: standalone/drakbackup:2733 #, c-format msgid "Please uncheck or remove it on next time." msgstr "" #: standalone/drakbackup:2743 #, c-format msgid "Backup files are corrupted" msgstr "" #: standalone/drakbackup:2764 #, c-format msgid " All of your selected data have been " msgstr "" #: standalone/drakbackup:2765 #, c-format msgid " Successfully Restored on %s " msgstr " %s da muvaffaqiyatli tiklandi " #: standalone/drakbackup:2885 #, c-format msgid " Restore Configuration " msgstr " Moslamani tiklash " #: standalone/drakbackup:2913 #, c-format msgid "OK to restore the other files." msgstr "Ok - boshqa fayllarni tiklash uchun" #: standalone/drakbackup:2929 #, c-format msgid "User list to restore (only the most recent date per user is important)" msgstr "" #: standalone/drakbackup:2994 #, c-format msgid "Please choose the date to restore:" msgstr "Iltimos tiklash uchun sanani tanlang:" #: standalone/drakbackup:3031 #, c-format msgid "Restore from Hard Disk." msgstr "Qattiq diskdan tiklash." #: standalone/drakbackup:3033 #, c-format msgid "Enter the directory where backups are stored" msgstr "" #: standalone/drakbackup:3037 #, c-format msgid "Directory with backups" msgstr "" #: standalone/drakbackup:3091 #, c-format msgid "Select another media to restore from" msgstr "Tiklash uchun boshqa ma'lumot tashuvchini tanlang" #: standalone/drakbackup:3093 #, c-format msgid "Other Media" msgstr "Boshqa ma'lumot tashuvchisi" #: standalone/drakbackup:3098 #, c-format msgid "Restore system" msgstr "Tizimni tiklash" #: standalone/drakbackup:3099 #, c-format msgid "Restore Users" msgstr "Foydalanuvchilarni tiklash" #: standalone/drakbackup:3100 #, c-format msgid "Restore Other" msgstr "Boshqani tiklash" #: standalone/drakbackup:3102 #, c-format msgid "Select path to restore (instead of /)" msgstr "Tiklash uchun yo'lni tanlang (/ o'rniga)" #: standalone/drakbackup:3106 standalone/drakbackup:3388 #, c-format msgid "Path To Restore To" msgstr "" #: standalone/drakbackup:3109 #, c-format msgid "Do new backup before restore (only for incremental backups.)" msgstr "" #: standalone/drakbackup:3111 #, c-format msgid "Remove user directories before restore." msgstr "Tiklashdan oldin foydalanuvchilarning direktoriyalarini o'chirish." #: standalone/drakbackup:3196 #, c-format msgid "Filename text substring to search for (empty string matches all):" msgstr "" #: standalone/drakbackup:3199 #, c-format msgid "Search Backups" msgstr "" #: standalone/drakbackup:3217 #, c-format msgid "No matches found..." msgstr "" #: standalone/drakbackup:3221 #, c-format msgid "Restore Selected" msgstr "Tanlanganni tiklash" #: standalone/drakbackup:3356 #, c-format msgid "" "Click date/time to see backup files.\n" "Ctrl-Click files to select multiple files." msgstr "" #: standalone/drakbackup:3362 #, c-format msgid "" "Restore Selected\n" "Catalog Entry" msgstr "" #: standalone/drakbackup:3371 #, c-format msgid "" "Restore Selected\n" "Files" msgstr "" "Tanlangan fayllarni\n" "tiklash" #: standalone/drakbackup:3448 #, c-format msgid "Backup files not found at %s." msgstr "" #: standalone/drakbackup:3461 #, c-format msgid "Restore From CD" msgstr "Kompakt-diskdan tiklash" #: standalone/drakbackup:3461 #, c-format msgid "" "Insert the CD with volume label %s\n" " in the CD drive under mount point /mnt/cdrom" msgstr "" #: standalone/drakbackup:3463 #, c-format msgid "Not the correct CD label. Disk is labelled %s." msgstr "" #: standalone/drakbackup:3473 #, c-format msgid "Restore From Tape" msgstr "Magnit tasmasidan tiklash" #: standalone/drakbackup:3473 #, c-format msgid "" "Insert the tape with volume label %s\n" " in the tape drive device %s" msgstr "" #: standalone/drakbackup:3475 #, c-format msgid "Not the correct tape label. Tape is labelled %s." msgstr "" #: standalone/drakbackup:3486 #, c-format msgid "Restore Via Network" msgstr "Tarmoq orqali tiklash" #: standalone/drakbackup:3486 #, c-format msgid "Restore Via Network Protocol: %s" msgstr "Quyidagi tarmoq protokoli orqali tiklash: %s" #: standalone/drakbackup:3487 #, c-format msgid "Host Name" msgstr "Kompyuterning nomi" #: standalone/drakbackup:3488 #, c-format msgid "Host Path or Module" msgstr "Xostga yo'l yoki modul" #: standalone/drakbackup:3495 #, c-format msgid "Password required" msgstr "Maxfiy so'z kerak" #: standalone/drakbackup:3501 #, c-format msgid "Username required" msgstr "Foydalanuvchining nomi kerak" #: standalone/drakbackup:3504 #, c-format msgid "Hostname required" msgstr "Xostning homi kerak" #: standalone/drakbackup:3509 #, c-format msgid "Path or Module required" msgstr "Yo'l yoki modul kerak" #: standalone/drakbackup:3522 #, c-format msgid "Files Restored..." msgstr "Fayllar tiklandi" #: standalone/drakbackup:3525 #, c-format msgid "Restore Failed..." msgstr "Tiklash muvaffaqiyatsiz tugadi" #: standalone/drakbackup:3543 #, c-format msgid "%s not retrieved..." msgstr "" #: standalone/drakbackup:3764 standalone/drakbackup:3833 #, c-format msgid "Search for files to restore" msgstr "Tiklash uchun fayllarni qidirish" #: standalone/drakbackup:3768 #, c-format msgid "Restore all backups" msgstr "" #: standalone/drakbackup:3776 #, c-format msgid "Custom Restore" msgstr "" #: standalone/drakbackup:3780 standalone/drakbackup:3829 #, c-format msgid "Restore From Catalog" msgstr "Katalogdan tiklash" #: standalone/drakbackup:3801 #, c-format msgid "Unable to find backups to restore...\n" msgstr "" #: standalone/drakbackup:3802 #, c-format msgid "Verify that %s is the correct path" msgstr "%s to'g'ri yo'lligini tekshiring" #: standalone/drakbackup:3803 #, c-format msgid " and the CD is in the drive" msgstr "" #: standalone/drakbackup:3805 #, c-format msgid "Backups on unmountable media - Use Catalog to restore" msgstr "" #: standalone/drakbackup:3821 #, c-format msgid "CD in place - continue." msgstr "Kompakt-diskni joyiga qo'ying - davom eting." #: standalone/drakbackup:3826 #, c-format msgid "Browse to new restore repository." msgstr "" #: standalone/drakbackup:3827 #, c-format msgid "Directory To Restore From" msgstr "" #: standalone/drakbackup:3863 #, c-format msgid "Restore Progress" msgstr "" #: standalone/drakbackup:3974 #, c-format msgid "Build Backup" msgstr "" #: standalone/drakbackup:4007 standalone/drakbackup:4327 #, c-format msgid "Restore" msgstr "Tiklash" #: standalone/drakbackup:4095 standalone/harddrake2:478 #, c-format msgid "The following packages need to be installed:\n" msgstr "Quyidagi paketlarni o'rnatish kerak:\n" #: standalone/drakbackup:4122 #, c-format msgid "Please select data to restore..." msgstr "Iltimos tiklash uchun ma'lumotni tanlang..." #: standalone/drakbackup:4162 #, c-format msgid "Backup system files" msgstr "" #: standalone/drakbackup:4165 #, c-format msgid "Backup user files" msgstr "" #: standalone/drakbackup:4168 #, c-format msgid "Backup other files" msgstr "" #: standalone/drakbackup:4171 standalone/drakbackup:4205 #, c-format msgid "Total Progress" msgstr "" #: standalone/drakbackup:4197 #, c-format msgid "Sending files by FTP" msgstr "Fayllar FTP orqali jo'natilmoqda" #: standalone/drakbackup:4200 #, c-format msgid "Sending files..." msgstr "Fayllar jo'natilmoqda..." #: standalone/drakbackup:4270 #, c-format msgid "Backup Now from configuration file" msgstr "" #: standalone/drakbackup:4275 #, c-format msgid "View Backup Configuration." msgstr "" #: standalone/drakbackup:4301 #, c-format msgid "Wizard Configuration" msgstr "Moslash yordamchisi" #: standalone/drakbackup:4306 #, c-format msgid "Advanced Configuration" msgstr "Qo'shimcha moslamalar" #: standalone/drakbackup:4311 #, c-format msgid "View Configuration" msgstr "Moslamani ko'rish" #: standalone/drakbackup:4315 #, c-format msgid "View Last Log" msgstr "" #: standalone/drakbackup:4320 #, c-format msgid "Backup Now" msgstr "" #: standalone/drakbackup:4324 #, c-format msgid "" "No configuration file found \n" "please click Wizard or Advanced." msgstr "" #: standalone/drakbackup:4344 standalone/drakbackup:4347 #, c-format msgid "Drakbackup" msgstr "Drakbackup" #: standalone/drakboot:76 standalone/harddrake2:190 standalone/harddrake2:191 #: standalone/harddrake2:192 standalone/logdrake:69 #: standalone/printerdrake:138 standalone/printerdrake:139 #: standalone/printerdrake:140 #, c-format msgid "/_File" msgstr "/_Fayl" #: standalone/drakboot:77 standalone/logdrake:75 #, c-format msgid "/File/_Quit" msgstr "/Fayl/Chi_qish" #: standalone/drakboot:77 standalone/harddrake2:192 standalone/logdrake:75 #: standalone/printerdrake:140 #, c-format msgid "Q" msgstr "Q" #: standalone/drakboot:117 #, c-format msgid "Text only" msgstr "" #: standalone/drakboot:118 #, c-format msgid "Verbose" msgstr "" #: standalone/drakboot:119 #, c-format msgid "Silent" msgstr "" #: standalone/drakboot:126 #, c-format msgid "" "Your system bootloader is not in framebuffer mode. To activate graphical " "boot, select a graphic video mode from the bootloader configuration tool." msgstr "" #: standalone/drakboot:127 #, c-format msgid "Do you want to configure it now?" msgstr "Uni moslashni istaysizmi?" #: standalone/drakboot:136 #, c-format msgid "Install themes" msgstr "Mavzularni o'rnatish" #: standalone/drakboot:138 #, c-format msgid "Graphical boot theme selection" msgstr "" #: standalone/drakboot:143 #, c-format msgid "Theme" msgstr "Mavzu" #: standalone/drakboot:146 #, c-format msgid "" "Display theme\n" "under console" msgstr "" "Mavzularni\n" "konsolda ko'rsatish" #: standalone/drakboot:151 #, c-format msgid "Create new theme" msgstr "Yangi mavzuni yaratish" #: standalone/drakboot:183 #, c-format msgid "Default user" msgstr "Andoza foydalanuvchi" #: standalone/drakboot:184 #, c-format msgid "Default desktop" msgstr "Andoza ish stoli" #: standalone/drakboot:187 #, c-format msgid "No, I do not want autologin" msgstr "Yo'q, tizimga avtomatik ravishda kirishni istamayman" #: standalone/drakboot:188 #, c-format msgid "Yes, I want autologin with this (user, desktop)" msgstr "Ha, tizimga avtomatik ravishda kirishni istayman" #: standalone/drakboot:195 #, c-format msgid "System mode" msgstr "Tizimning usuli" #: standalone/drakboot:198 #, c-format msgid "Launch the graphical environment when your system starts" msgstr "Tizim yuklanayotganda grafik muhitini ishga tushirish" #: standalone/drakboot:264 #, c-format msgid "" "Please choose a video mode, it will be applied to each of the boot entries " "selected below.\n" "Be sure your video card supports the mode you choose." msgstr "" #: standalone/drakbug:41 #, c-format msgid "Mandriva Linux Bug Report Tool" msgstr "Mandriva Linux uchun xato haqida xabar qiluvchi vosita" #: standalone/drakbug:46 #, c-format msgid "Mandriva Linux Control Center" msgstr "Mandriva Linux boshqaruv markazi" #: standalone/drakbug:48 #, c-format msgid "Synchronization tool" msgstr "Tenglashtirish asbobi" #: standalone/drakbug:49 standalone/drakbug:152 #, c-format msgid "Standalone Tools" msgstr "" #: standalone/drakbug:50 #, c-format msgid "HardDrake" msgstr "HardDrake" #: standalone/drakbug:51 #, c-format msgid "Mandriva Online" msgstr "Mandriva Online" #: standalone/drakbug:52 #, c-format msgid "Menudrake" msgstr "Menudrake" #: standalone/drakbug:53 #, c-format msgid "Msec" msgstr "Msec" #: standalone/drakbug:54 #, c-format msgid "Remote Control" msgstr "Masofadan boshqarish" #: standalone/drakbug:55 #, c-format msgid "Software Manager" msgstr "Dasturlar boshqaruvchisi" #: standalone/drakbug:56 #, c-format msgid "Urpmi" msgstr "Urpmi" #: standalone/drakbug:57 #, c-format msgid "Windows Migration tool" msgstr "" #: standalone/drakbug:58 #, c-format msgid "Userdrake" msgstr "Userdrake" #: standalone/drakbug:59 #, c-format msgid "Configuration Wizards" msgstr "Moslash yordamchilari" #: standalone/drakbug:81 #, c-format msgid "Select Mandriva Tool:" msgstr "" #: standalone/drakbug:82 #, fuzzy, c-format msgid "" "or Application Name\n" "(or Full Path):" msgstr "" "Dasturning nomi\n" "yoki to'liq yo'l:" #: standalone/drakbug:85 #, c-format msgid "Find Package" msgstr "Paketni qidirish" #: standalone/drakbug:87 #, c-format msgid "Package: " msgstr "Paket: " #: standalone/drakbug:88 #, c-format msgid "Kernel:" msgstr "Kernel:" #: standalone/drakbug:101 #, c-format msgid "" "To submit a bug report, click on the report button. \n" "This will open a web browser window on %s where you'll find a form to fill " "in. The information displayed above will be transferred to that server. \n" "Things useful to include in your report are the output of lspci, kernel " "version, and /proc/cpuinfo." msgstr "" #: standalone/drakbug:107 #, c-format msgid "Report" msgstr "Xabar berish" #: standalone/drakbug:162 #, c-format msgid "Not installed" msgstr "O'rnatilmagan" #: standalone/drakbug:174 #, c-format msgid "Package not installed" msgstr "Paket o'rnatilmagan" #: standalone/drakclock:29 #, c-format msgid "DrakClock" msgstr "DrakClock" #: standalone/drakclock:39 #, c-format msgid "not defined" msgstr "aniqlanmagan" #: standalone/drakclock:41 #, c-format msgid "Change Time Zone" msgstr "Vaqt zonasini o'zgartirish" #: standalone/drakclock:45 #, c-format msgid "Timezone - DrakClock" msgstr "Vaqt zonasi - DrakClock" #: standalone/drakclock:47 #, c-format msgid "GMT - DrakClock" msgstr "GMT - DrakClock" #: standalone/drakclock:47 #, c-format msgid "Is your hardware clock set to GMT?" msgstr "" #: standalone/drakclock:75 #, c-format msgid "Network Time Protocol" msgstr "" #: standalone/drakclock:77 #, c-format msgid "" "Your computer can synchronize its clock\n" " with a remote time server using NTP" msgstr "" #: standalone/drakclock:78 #, c-format msgid "Enable Network Time Protocol" msgstr "" #: standalone/drakclock:86 #, c-format msgid "Server:" msgstr "Server:" #: standalone/drakclock:124 #, c-format msgid "Could not synchronize with %s." msgstr "" #: standalone/drakclock:146 standalone/drakclock:156 #, c-format msgid "Reset" msgstr "Tiklash" #: standalone/drakclock:224 #, c-format msgid "" "We need to install ntp package\n" " to enable Network Time Protocol\n" "\n" "Do you want to install ntp?" msgstr "" "Tarmoq Vaqt Protokolini yoqish\n" "uchun ntp paketini o'rnatish kerak\n" "\n" "Uni o'rnatishni istaysizmi?" #: standalone/drakconnect:80 #, c-format msgid "Network configuration (%d adapters)" msgstr "Tarmoqning moslamasi (%d adapter)" #: standalone/drakconnect:89 standalone/drakconnect:803 #: standalone/drakroam:163 #, c-format msgid "Gateway:" msgstr "Geytvey:" #: standalone/drakconnect:89 standalone/drakconnect:803 #, c-format msgid "Interface:" msgstr "Interfeys:" #: standalone/drakconnect:93 standalone/net_monitor:117 #, c-format msgid "Wait please" msgstr "Iltimos kutib turing" #: standalone/drakconnect:109 #, c-format msgid "Interface" msgstr "Interfeys" #: standalone/drakconnect:109 standalone/printerdrake:211 #: standalone/printerdrake:218 #, c-format msgid "State" msgstr "Holati" #: standalone/drakconnect:126 #, c-format msgid "Hostname: " msgstr "Kompyuterning nomi: " #: standalone/drakconnect:128 #, c-format msgid "Configure hostname..." msgstr "Kompyuterning nomini moslash" #: standalone/drakconnect:142 standalone/drakconnect:841 #, c-format msgid "LAN configuration" msgstr "Lokal tarmoqni moslash" #: standalone/drakconnect:147 #, c-format msgid "Configure Local Area Network..." msgstr "Lokal tarmoqni moslash" #: standalone/drakconnect:155 standalone/drakconnect:237 #: standalone/drakconnect:241 standalone/drakhosts:263 #, c-format msgid "Apply" msgstr "Qo'llash" #: standalone/drakconnect:188 #, c-format msgid "Manage connections" msgstr "Aloqalarni boshqarish" #: standalone/drakconnect:215 #, c-format msgid "Device selected" msgstr "Uskuna tanlangan" #: standalone/drakconnect:296 #, c-format msgid "IP configuration" msgstr "IP moslamasi" #: standalone/drakconnect:335 #, c-format msgid "DNS servers" msgstr "DNS serverlari" #: standalone/drakconnect:343 #, c-format msgid "Search Domain" msgstr "" #: standalone/drakconnect:351 #, c-format msgid "static" msgstr "statik" #: standalone/drakconnect:351 standalone/drakroam:144 #, c-format msgid "DHCP" msgstr "DHCP" #: standalone/drakconnect:515 #, c-format msgid "Flow control" msgstr "" #: standalone/drakconnect:516 #, c-format msgid "Line termination" msgstr "" #: standalone/drakconnect:527 #, c-format msgid "Modem timeout" msgstr "Modem uchun taymaut" #: standalone/drakconnect:531 #, c-format msgid "Use lock file" msgstr "" #: standalone/drakconnect:533 #, c-format msgid "Wait for dialup tone before dialing" msgstr "" #: standalone/drakconnect:536 #, c-format msgid "Busy wait" msgstr "" #: standalone/drakconnect:541 #, c-format msgid "Modem sound" msgstr "Modem tovushi" #: standalone/drakconnect:542 standalone/drakgw:105 #, c-format msgid "Enable" msgstr "Yoqish" #: standalone/drakconnect:542 standalone/drakgw:105 #, c-format msgid "Disable" msgstr "O'chirish" #: standalone/drakconnect:593 standalone/harddrake2:50 #, c-format msgid "Media class" msgstr "Ma'lumot tashuvchining sinfi" #: standalone/drakconnect:594 #, c-format msgid "Module name" msgstr "Modulning nomi" #: standalone/drakconnect:595 #, c-format msgid "Mac Address" msgstr "Mac raqami" #: standalone/drakconnect:596 standalone/harddrake2:28 #: standalone/harddrake2:120 #, c-format msgid "Bus" msgstr "" #: standalone/drakconnect:597 standalone/harddrake2:34 #, c-format msgid "Location on the bus" msgstr "" #: standalone/drakconnect:696 standalone/drakgw:322 #, c-format msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "" "Tizimda tarmoq adapteri aniqlanmadi. Iltimos asbob-uskunani moslovchi " "vositani ishga tushiring." #: standalone/drakconnect:704 #, c-format msgid "Remove a network interface" msgstr "Tarmoq interfeysini olib tashlash" #: standalone/drakconnect:708 #, c-format msgid "Select the network interface to remove:" msgstr "Olib tashlash uchun tarmoq interfeysini tanlang:" #: standalone/drakconnect:740 #, c-format msgid "" "An error occurred while deleting the \"%s\" network interface:\n" "\n" "%s" msgstr "" "\"%s\" tarmoq interfeysini olib tashlashda xato ro'y berdi:\n" "\n" "%s" #: standalone/drakconnect:741 #, c-format msgid "" "Congratulations, the \"%s\" network interface has been successfully deleted" msgstr "Tabriklaymiz. \"%s\" tarmoq interfeysi muvaffaqiyatli olib tashlandi." #: standalone/drakconnect:757 #, c-format msgid "No IP" msgstr "IP raqami ko'rsatilmagan" #: standalone/drakconnect:758 #, c-format msgid "No Mask" msgstr "Maskasiz" #: standalone/drakconnect:759 standalone/drakconnect:912 #, c-format msgid "up" msgstr "ishlayapti" #: standalone/drakconnect:759 standalone/drakconnect:912 #, c-format msgid "down" msgstr "ishlamayapti" #: standalone/drakconnect:794 standalone/net_monitor:466 #, c-format msgid "Connected" msgstr "Ulangan" #: standalone/drakconnect:794 standalone/net_monitor:466 #, c-format msgid "Not connected" msgstr "Ulanmagan" #: standalone/drakconnect:796 #, c-format msgid "Disconnect..." msgstr "Uzish..." #: standalone/drakconnect:796 #, c-format msgid "Connect..." msgstr "Ulanish..." #: standalone/drakconnect:837 #, c-format msgid "Deactivate now" msgstr "O'chirish" #: standalone/drakconnect:837 #, c-format msgid "Activate now" msgstr "Yoqish" #: standalone/drakconnect:845 #, c-format msgid "" "You do not have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" "Sizda moslangan interfeys yo'q.\n" "Avvalo, ularni \"Moslash\"ni bosib moslang." #: standalone/drakconnect:859 #, c-format msgid "LAN Configuration" msgstr "Lokal tarmoqni moslash" #: standalone/drakconnect:871 #, c-format msgid "Adapter %s: %s" msgstr "Adapter %s: %s" #: standalone/drakconnect:880 #, c-format msgid "Boot Protocol" msgstr "" #: standalone/drakconnect:881 #, c-format msgid "Started on boot" msgstr "Tizim yuklanganda ishga tushirilgan" #: standalone/drakconnect:917 #, c-format msgid "" "This interface has not been configured yet.\n" "Run the \"Add an interface\" assistant from the Mandriva Linux Control Center" msgstr "" "Bu interfeys hali moslangani yo'q.\n" "Mandriva Linux boshqaruv markazidan \"Interfeysni qo'shish\" yordamchini " "ishga tushiring" #: standalone/drakconnect:971 standalone/net_applet:55 #, c-format msgid "" "You do not have any configured Internet connection.\n" "Run the \"%s\" assistant from the Mandriva Linux Control Center" msgstr "" "Internet bilan aloqa moslanmagan.\n" "Mandriva Linux boshqaruv markazidan \"%s\" yordamchini ishga tushiring" #. -PO: here "Add Connection" should be translated the same was as in control-center #: standalone/drakconnect:972 standalone/drakroam:42 standalone/net_applet:56 #, fuzzy, c-format msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)" msgstr "Tarmoq interfeysini olib tashlash" #: standalone/drakconnect:977 #, c-format msgid "Internet connection configuration" msgstr "Internetga ulanishni moslash" #: standalone/drakconnect:995 #, c-format msgid "Third DNS server (optional)" msgstr "Uchinchi DNS serveri (tanlab bo'ladi)" #: standalone/drakconnect:1017 #, c-format msgid "Internet Connection Configuration" msgstr "Internetga ulanishni moslash" #: standalone/drakconnect:1018 #, c-format msgid "Internet access" msgstr "Internetga ulanish" #: standalone/drakconnect:1020 standalone/net_monitor:96 #, c-format msgid "Connection type: " msgstr "Ulanishning turi: " #: standalone/drakconnect:1023 #, c-format msgid "Status:" msgstr "Holati:" #: standalone/drakedm:40 #, c-format msgid "GDM (GNOME Display Manager)" msgstr "" #: standalone/drakedm:41 #, c-format msgid "KDM (KDE Display Manager)" msgstr "" #: standalone/drakedm:42 #, c-format msgid "XDM (X Display Manager)" msgstr "XDM (X Display Manager)" #: standalone/drakedm:53 #, c-format msgid "Choosing a display manager" msgstr "Displey boshqaruvchisini tanlash" #: standalone/drakedm:54 #, c-format msgid "" "X11 Display Manager allows you to graphically log\n" "into your system with the X Window System running and supports running\n" "several different X sessions on your local machine at the same time." msgstr "" #: standalone/drakedm:72 #, c-format msgid "The change is done, do you want to restart the dm service?" msgstr "" "O'zgarishlar qo'llandi, dm xizmatini boshqadan ishga tushirishni istaysizmi?" #: standalone/drakedm:73 #, c-format msgid "" "You are going to close all running programs and lose your current session. " "Are you really sure that you want to restart the dm service?" msgstr "" #: standalone/drakfont:183 #, c-format msgid "Search installed fonts" msgstr "O'rnatilgan shriftlarni qidirish" #: standalone/drakfont:185 #, c-format msgid "Unselect fonts installed" msgstr "O'rnatilgan shriftlarni tanlashni bekor qilish" #: standalone/drakfont:208 #, c-format msgid "parse all fonts" msgstr "" #: standalone/drakfont:210 #, c-format msgid "No fonts found" msgstr "Hech qanday shrift topilmadi" #: standalone/drakfont:218 standalone/drakfont:260 standalone/drakfont:327 #: standalone/drakfont:360 standalone/drakfont:368 standalone/drakfont:394 #: standalone/drakfont:412 standalone/drakfont:426 #, c-format msgid "done" msgstr "Tayyor" #: standalone/drakfont:223 #, c-format msgid "Could not find any font in your mounted partitions" msgstr "Ulangan qismlarda hech qanday shrift topilmadi" #: standalone/drakfont:258 #, c-format msgid "Reselect correct fonts" msgstr "To'g'ri shriftlarni boshqadan tanlash" #: standalone/drakfont:261 #, c-format msgid "Could not find any font.\n" msgstr "Hech qanday shrift topilmadi.\n" #: standalone/drakfont:271 #, c-format msgid "Search for fonts in installed list" msgstr "O'rnatilgan ro'yxatda shriftlarni qidirish" #: standalone/drakfont:296 #, c-format msgid "%s fonts conversion" msgstr "%s shriftni aylantirish" #: standalone/drakfont:325 #, c-format msgid "Fonts copy" msgstr "Shriftlardan nusxa ko'chirish" #: standalone/drakfont:328 #, c-format msgid "True Type fonts installation" msgstr "True Type shriftlarini o'rnatish" #: standalone/drakfont:335 #, c-format msgid "please wait during ttmkfdir..." msgstr "iltimos ttmkfdir tugaguncha kutib turing..." #: standalone/drakfont:336 #, c-format msgid "True Type install done" msgstr "True Type shriftlar o'rnatildi" #: standalone/drakfont:342 standalone/drakfont:357 #, c-format msgid "type1inst building" msgstr "type1inst'ni yaratish" #: standalone/drakfont:351 #, c-format msgid "Ghostscript referencing" msgstr "" #: standalone/drakfont:361 #, c-format msgid "Suppress Temporary Files" msgstr "Vaqtinchalik fayllarni o'chirish" #: standalone/drakfont:364 #, c-format msgid "Restart XFS" msgstr "XFS-ni boshqadan ishga tushirish" #: standalone/drakfont:410 standalone/drakfont:420 #, c-format msgid "Suppress Fonts Files" msgstr "" #: standalone/drakfont:422 #, c-format msgid "xfs restart" msgstr "XFS-ni boshqadan ishga tushirish" #: standalone/drakfont:430 #, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "-You can install the fonts the normal way. In rare cases, bogus fonts may " "hang up your X Server." msgstr "" #: standalone/drakfont:474 standalone/drakfont:483 #, c-format msgid "DrakFont" msgstr "DrakFont" #: standalone/drakfont:484 #, c-format msgid "Font List" msgstr "Shriftlarning ro'yxati" #: standalone/drakfont:490 #, c-format msgid "About" msgstr "Haqida" #: standalone/drakfont:492 standalone/drakfont:688 standalone/drakfont:726 #, c-format msgid "Uninstall" msgstr "O'chirish" #: standalone/drakfont:493 #, c-format msgid "Import" msgstr "Import qilish" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: standalone/drakfont:511 #, c-format msgid "" "Copyright (C) 2001-2002 by Mandriva \n" "\n" "\n" " DUPONT Sebastien (original version)\n" "\n" " CHAUMETTE Damien \n" "\n" " VIGNAUD Thierry " msgstr "" #: standalone/drakfont:520 #, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" " it under the terms of the GNU General Public License as published by\n" " the Free Software Foundation; either version 2, or (at your option)\n" " any later version.\n" "\n" "\n" " This program is distributed in the hope that it will be useful,\n" " but WITHOUT ANY WARRANTY; without even the implied warranty of\n" " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" " GNU General Public License for more details.\n" "\n" "\n" " You should have received a copy of the GNU General Public License\n" " along with this program; if not, write to the Free Software\n" " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA." msgstr "" #: standalone/drakfont:536 #, c-format msgid "" "Thanks:\n" "\n" " - pfm2afm: \n" "\t by Ken Borgendale:\n" "\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n" "\n" " - type1inst:\n" "\t by James Macnicol: \n" "\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n" "\n" " - ttf2pt1: \n" "\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" " Convert ttf font files to afm and pfb fonts\n" msgstr "" #: standalone/drakfont:555 #, c-format msgid "Choose the applications that will support the fonts:" msgstr "" #: standalone/drakfont:556 #, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "You can install the fonts the normal way. In rare cases, bogus fonts may " "hang up your X Server." msgstr "" #: standalone/drakfont:566 #, c-format msgid "Ghostscript" msgstr "Ghostscript" #: standalone/drakfont:567 #, c-format msgid "StarOffice" msgstr "StarOffice" #: standalone/drakfont:568 #, c-format msgid "Abiword" msgstr "Abiword" #: standalone/drakfont:569 #, c-format msgid "Generic Printers" msgstr "Andoza printerlar" #: standalone/drakfont:585 #, c-format msgid "Select the font file or directory and click on 'Add'" msgstr "" "Shrift faylini yoki direktoriyani tanlang va \"Qo'shish\" tugmasini bosing" #: standalone/drakfont:586 #, c-format msgid "File Selection" msgstr "Faylni tanlash" #: standalone/drakfont:590 #, c-format msgid "Fonts" msgstr "Shriftlar" #: standalone/drakfont:653 #, c-format msgid "Import fonts" msgstr "Shriftlarni import qilish" #: standalone/drakfont:658 #, c-format msgid "Install fonts" msgstr "Shriftlarni o'rnatish" #: standalone/drakfont:693 #, c-format msgid "click here if you are sure." msgstr "agar ishonchingiz komil bo'lsa, bu erni bosing." #: standalone/drakfont:695 #, c-format msgid "here if no." msgstr "bu erga, agar \"yo'q\" bo'lsa." #: standalone/drakfont:734 #, c-format msgid "Unselected All" msgstr "Hech qaysini tanlamash" #: standalone/drakfont:737 #, c-format msgid "Selected All" msgstr "Hammasini tanlash" #: standalone/drakfont:740 #, c-format msgid "Remove List" msgstr "Ro'yxatni olib tashlash" #: standalone/drakfont:751 standalone/drakfont:770 #, c-format msgid "Importing fonts" msgstr "Shriftlar import qilinmoqda" #: standalone/drakfont:755 standalone/drakfont:775 #, c-format msgid "Initial tests" msgstr "Boshlang'ich sinovlar" #: standalone/drakfont:756 #, c-format msgid "Copy fonts on your system" msgstr "Tizimga shriftlardan nusxa ko'chirish" #: standalone/drakfont:757 #, c-format msgid "Install & convert Fonts" msgstr "Shriftlarni o'rnatish va aylantirish" #: standalone/drakfont:758 #, c-format msgid "Post Install" msgstr "O'rnatishdan keyin amallar" #: standalone/drakfont:776 #, c-format msgid "Remove fonts on your system" msgstr "Tizimdan shriftlarni olib tashlash" #: standalone/drakfont:777 #, c-format msgid "Post Uninstall" msgstr "" #: standalone/drakgw:50 standalone/drakvpn:51 #, c-format msgid "Sorry, we support only 2.4 and above kernels." msgstr "" #: standalone/drakgw:75 #, c-format msgid "Internet Connection Sharing" msgstr "" #: standalone/drakgw:79 #, c-format msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use " "this computer's Internet connection.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" #: standalone/drakgw:95 #, c-format msgid "" "The setup of Internet Connection Sharing has already been done.\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" #: standalone/drakgw:99 #, c-format msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" #: standalone/drakgw:105 #, fuzzy, c-format msgid "Reconfigure" msgstr "Boshqadan moslash" #: standalone/drakgw:145 #, c-format msgid "" "There is only one configured network adapter on your system:\n" "\n" "%s\n" "\n" "I am about to setup your Local Area Network with that adapter." msgstr "" "Tizimda faqat bitta moslangan tarmoq adapteri bor:\n" "\n" "%s\n" "\n" "Men shu adapter bilan lokal tarmog'ingizni o'rnataman." #: standalone/drakgw:156 #, c-format msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." msgstr "Iltimos lokal tarmog'ingizga ulanadigan tarmoq adapterini tanlang." #: standalone/drakgw:177 #, fuzzy, c-format msgid "Local Area Network setings" msgstr "Lokal tarmoqning manzili" #: standalone/drakgw:180 #, c-format msgid "Local IP adress" msgstr "" #: standalone/drakgw:182 #, c-format msgid "The internal domain name" msgstr "" #: standalone/drakgw:188 #, c-format msgid "Potential LAN address conflict found in current config of %s!\n" msgstr "" #: standalone/drakgw:204 #, fuzzy, c-format msgid "Domain Name Server (DNS) configuration" msgstr "Terminal serverini moslash" #: standalone/drakgw:208 #, c-format msgid "Use this gateway as domain name server" msgstr "" #: standalone/drakgw:209 #, c-format msgid "The DNS Server IP" msgstr "DNS serverining IP raqami" #: standalone/drakgw:241 #, c-format msgid "" "DHCP Server Configuration.\n" "\n" "Here you can select different options for the DHCP server configuration.\n" "If you do not know the meaning of an option, simply leave it as it is." msgstr "" "DHCP serverni moslash.\n" "\n" "Bu erda DHCP serverini moslash uchun turli parametrlarni tanlashingiz " "mumkin.\n" "Agar biror parametrning ma'nosini bilmasangiz, uni shunday qoldiring." #: standalone/drakgw:248 #, fuzzy, c-format msgid "Use automatic configuration (DHCP)" msgstr "Avtomatik ravishda boshqadan moslash" #: standalone/drakgw:249 #, c-format msgid "The DHCP start range" msgstr "DHCP'ning pastgi chegarasi" #: standalone/drakgw:250 #, c-format msgid "The DHCP end range" msgstr "DHCP'ning yuqori chegarasi" #: standalone/drakgw:251 #, c-format msgid "The default lease (in seconds)" msgstr "" #: standalone/drakgw:252 #, c-format msgid "The maximum lease (in seconds)" msgstr "" #: standalone/drakgw:278 #, c-format msgid "Proxy caching server (SQUID)" msgstr "" #: standalone/drakgw:282 #, c-format msgid "Use this gateway as proxy caching server" msgstr "" #: standalone/drakgw:283 #, c-format msgid "Admin mail" msgstr "" #: standalone/drakgw:284 #, fuzzy, c-format msgid "Visible hostname" msgstr "Masofadagi xostning nomi" #: standalone/drakgw:285 #, fuzzy, c-format msgid "Proxy port" msgstr "Egalik" #: standalone/drakgw:286 #, fuzzy, c-format msgid "Cache size (MB)" msgstr "Keshning hajmi" #: standalone/drakgw:311 #, fuzzy, c-format msgid "Broadcast printer information" msgstr "Qattiq disk haqida ma'lumot" #: standalone/drakgw:328 #, c-format msgid "Internet Connection Sharing is now enabled." msgstr "" #: standalone/drakgw:334 #, c-format msgid "Internet Connection Sharing is now disabled." msgstr "" #: standalone/drakgw:340 #, c-format msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local " "Area Network, using automatic network configuration (DHCP) and\n" " a Transparent Proxy Cache server (SQUID)." msgstr "" #: standalone/drakgw:375 #, c-format msgid "Disabling servers..." msgstr "Serverlar o'chirilmoqda..." #: standalone/drakgw:389 #, c-format msgid "Firewalling configuration detected!" msgstr "" #: standalone/drakgw:390 #, c-format msgid "" "Warning! An existing firewalling configuration has been detected. You may " "need some manual fixes after installation." msgstr "" #: standalone/drakgw:398 #, c-format msgid "Configuring..." msgstr "Moslanmoqda..." #: standalone/drakgw:399 #, c-format msgid "Configuring firewall..." msgstr "" #: standalone/drakhelp:17 #, c-format msgid "" " drakhelp 0.1\n" "Copyright (C) 2003-2005 Mandriva.\n" "This is free software and may be redistributed under the terms of the GNU " "GPL.\n" "\n" "Usage: \n" msgstr "" " drakhelp 0.1\n" "Copyright (C) 2003-2005 Mandriva.\n" "Bu erkin dastur va GNU GPL shartlari asosida tarqatilishi mumkin.\n" "\n" "Foydalanish:\n" #: standalone/drakhelp:22 #, c-format msgid " --help - display this help \n" msgstr " --help - shu yordamni ko'rsatish\n" #: standalone/drakhelp:23 #, c-format msgid "" " --id - load the html help page which refers to id_label\n" msgstr "" #: standalone/drakhelp:24 #, c-format msgid "" " --doc - link to another web page ( for WM welcome " "frontend)\n" msgstr "" #: standalone/drakhelp:36 #, c-format msgid "Mandriva Linux Help Center" msgstr "Mandriva Linux yordam markazi" #: standalone/drakhelp:36 #, c-format msgid "" "%s cannot be displayed \n" ". No Help entry of this type\n" msgstr "" #: standalone/drakhosts:108 #, c-format msgid "Please %s information" msgstr "" #: standalone/drakhosts:110 #, c-format msgid "IP address:" msgstr "" #: standalone/drakhosts:111 #, c-format msgid "Host name:" msgstr "" #: standalone/drakhosts:112 #, c-format msgid "Host Aliases:" msgstr "" #: standalone/drakhosts:118 #, c-format msgid "Please enter a valid IP address." msgstr "" #: standalone/drakhosts:125 #, c-format msgid "Same IP is already in %s file." msgstr "" #: standalone/drakhosts:194 #, c-format msgid "Host Aliases" msgstr "" #: standalone/drakhosts:237 #, c-format msgid "DrakHOSTS manage hosts definitions" msgstr "" #: standalone/drakhosts:246 #, c-format msgid "Failed to add host." msgstr "" #: standalone/drakhosts:253 #, c-format msgid "Failed to Modify host." msgstr "" #: standalone/drakhosts:260 #, c-format msgid "Failed to remove host." msgstr "" #: standalone/draknfs:43 #, c-format msgid "map root user as anonymous" msgstr "" #: standalone/draknfs:44 #, c-format msgid "map all users to anonymous user" msgstr "" #: standalone/draknfs:45 #, c-format msgid "allow real remote user access" msgstr "" #: standalone/draknfs:46 #, c-format msgid "allow real remote root access" msgstr "" #: standalone/draknfs:85 #, c-format msgid "NFS server" msgstr "" #: standalone/draknfs:85 #, c-format msgid "Restarting/Reloading NFS server..." msgstr "" #: standalone/draknfs:86 #, c-format msgid "Error Restarting/Reloading NFS server" msgstr "" #: standalone/draknfs:102 #, c-format msgid "Directory Selection" msgstr "" #: standalone/draknfs:107 #, c-format msgid "Should be a directory." msgstr "" #: standalone/draknfs:138 #, c-format msgid "" "NFS clients may be specified in a number of " "ways:\n" "\n" "\n" "single host: a host either by an " "abbreviated name recognized be the resolver, fully qualified domain name, or " "an IP address\n" "\n" "\n" "netgroups: NIS netgroups may be given " "as @group.\n" "\n" "\n" "wildcards: machine names may contain " "the wildcard characters * and ?. For instance: *.cs.foo.edu matches all " "hosts in the domain cs.foo.edu.\n" "\n" "\n" "IP networks: you can also export " "directories to all hosts on an IP (sub-)network simultaneously. for example, " "either `/255.255.252.0' or `/22' appended to the network base address " "result.\n" msgstr "" #: standalone/draknfs:153 #, c-format msgid "" "User ID options\n" "\n" "\n" "root_squash: map requests from uid/" "gid 0 to the anonymous uid/gid.\n" "\n" "\n" "no_root_squash: turn off root " "squashing. This option is mainly useful for diskless clients.\n" "\n" "\n" "all_squash: map all uids and gids to " "the anonymous user. Useful for NFS-exported public FTP directories, news " "spool directories, etc. The opposite option is no_all_squash, which is the " "default setting.\n" "\n" "\n" "anonuid and anongid: explicitly set " "the uid and gid of the anonymous account.\n" msgstr "" #: standalone/draknfs:169 #, c-format msgid "Synchronous access:" msgstr "" #: standalone/draknfs:170 #, c-format msgid "Secured Connection:" msgstr "" #: standalone/draknfs:171 #, c-format msgid "Read-Only share:" msgstr "" #: standalone/draknfs:173 #, c-format msgid "Advanced Options" msgstr "" #: standalone/draknfs:174 #, c-format msgid "" "%s: this option requires that " "requests originate on an internet port less than IPPORT_RESERVED (1024). " "This option is on by default." msgstr "" #: standalone/draknfs:175 #, c-format msgid "" "%s: allow either only read or both " "read and write requests on this NFS volume. The default is to disallow any " "request which changes the filesystem. This can also be made explicit by " "using this option." msgstr "" #: standalone/draknfs:176 #, c-format msgid "" "%s: disallows the NFS server to " "violate the NFS protocol and to reply to requests before any changes made by " "these requests have been committed to stable storage (e.g. disc drive)." msgstr "" #: standalone/draknfs:387 #, c-format msgid "Help Adcanced options" msgstr "" #: standalone/draknfs:399 #, c-format msgid "NFS directory" msgstr "" #: standalone/draknfs:401 #, c-format msgid "Directory:" msgstr "" #: standalone/draknfs:404 #, c-format msgid "Host access" msgstr "" #: standalone/draknfs:406 #, c-format msgid "Access:" msgstr "" #: standalone/draknfs:406 #, c-format msgid "Hosts Access" msgstr "" #: standalone/draknfs:409 #, c-format msgid "User ID Mapping" msgstr "" #: standalone/draknfs:411 #, c-format msgid "User ID:" msgstr "" #: standalone/draknfs:411 #, c-format msgid "Help User ID" msgstr "" #: standalone/draknfs:412 #, c-format msgid "Anonymous user ID:" msgstr "" #: standalone/draknfs:413 #, c-format msgid "Anonymous Group ID:" msgstr "" #: standalone/draknfs:460 standalone/draknfs:552 #, c-format msgid "Please enter a directory to share." msgstr "" #: standalone/draknfs:462 #, c-format msgid "You must specify hosts access." msgstr "" #: standalone/draknfs:540 #, c-format msgid "Share Directory" msgstr "" #: standalone/draknfs:540 #, c-format msgid "Hosts Wildcard" msgstr "" #: standalone/draknfs:540 #, c-format msgid "General Options" msgstr "" #: standalone/draknfs:540 #, c-format msgid "Custom Options" msgstr "" #: standalone/draknfs:559 #, c-format msgid "Please use the modify button to set right access." msgstr "" #: standalone/draknfs:614 #, c-format msgid "DrakNFS manage NFS shares" msgstr "" #: standalone/draknfs:623 #, c-format msgid "Failed to add NFS share." msgstr "" #: standalone/draknfs:630 #, c-format msgid "Failed to Modify NFS share." msgstr "" #: standalone/draknfs:637 #, c-format msgid "Failed to remove an NFS share." msgstr "" #: standalone/drakperm:21 #, c-format msgid "System settings" msgstr "Tizim moslamalari" #: standalone/drakperm:22 #, c-format msgid "Custom settings" msgstr "Qo'shimcha moslamalar" #: standalone/drakperm:23 #, c-format msgid "Custom & system settings" msgstr "Qo'shimcha va tizim moslamalari" #: standalone/drakperm:43 #, c-format msgid "Editable" msgstr "Tahrirlab bo'ladi" #: standalone/drakperm:48 standalone/drakperm:323 #, c-format msgid "Path" msgstr "Yo'l" #: standalone/drakperm:48 standalone/drakperm:250 #, c-format msgid "User" msgstr "Foydalanuvchi" #: standalone/drakperm:48 standalone/drakperm:250 #, c-format msgid "Group" msgstr "Guruh" #: standalone/drakperm:48 standalone/drakperm:335 #, c-format msgid "Permissions" msgstr "Huquqlar" #: standalone/drakperm:57 #, c-format msgid "Add a new rule" msgstr "" #: standalone/drakperm:64 standalone/drakperm:99 standalone/drakperm:124 #, c-format msgid "Edit current rule" msgstr "Joriy qoidani tuzatish" #: standalone/drakperm:106 #, c-format msgid "" "Here you can see files to use in order to fix permissions, owners, and " "groups via msec.\n" "You can also edit your own rules which will owerwrite the default rules." msgstr "" #: standalone/drakperm:109 #, c-format msgid "" "The current security level is %s.\n" "Select permissions to see/edit" msgstr "" "Amaldagi havfsizlik darajasi - %s.\n" "Ko'rish/tahrirlash uchun ruxsatlarni tanlang" #: standalone/drakperm:120 #, c-format msgid "Up" msgstr "Yuqoriga" #: standalone/drakperm:120 #, c-format msgid "Move selected rule up one level" msgstr "Belgilangan qoidani bir daraja yuqoriga ko'tarish" #: standalone/drakperm:121 #, c-format msgid "Down" msgstr "Pastga" #: standalone/drakperm:121 #, c-format msgid "Move selected rule down one level" msgstr "Belgilangan qoidani bir daraja pastga tushirish" #: standalone/drakperm:122 #, c-format msgid "Add a rule" msgstr "Qoidani qo'shish" #: standalone/drakperm:122 #, c-format msgid "Add a new rule at the end" msgstr "Yangi qoidani oxiriga qo'shish" #: standalone/drakperm:123 #, c-format msgid "Delete selected rule" msgstr "Belgilangan qoidani o'chirish" #. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/drakperm:124 standalone/drakups:302 standalone/drakups:362 #: standalone/drakups:382 standalone/drakvpn:319 standalone/drakvpn:680 #: standalone/printerdrake:232 #, c-format msgid "Edit" msgstr "Tahrirlash" #: standalone/drakperm:242 #, c-format msgid "browse" msgstr "o'tish" #: standalone/drakperm:247 #, c-format msgid "user" msgstr "foydalanuvchi" #: standalone/drakperm:247 #, c-format msgid "group" msgstr "guruh" #: standalone/drakperm:247 #, c-format msgid "other" msgstr "boshqa" #: standalone/drakperm:252 #, c-format msgid "Read" msgstr "O'qish" #. -PO: here %s will be either "user", "group" or "other" #: standalone/drakperm:255 #, c-format msgid "Enable \"%s\" to read the file" msgstr "Faylni o'qish uchun \"%s\"ni yoqing" #: standalone/drakperm:259 #, c-format msgid "Write" msgstr "Yozish" #. -PO: here %s will be either "user", "group" or "other" #: standalone/drakperm:262 #, c-format msgid "Enable \"%s\" to write the file" msgstr "Faylga yozish uchun \"%s\"ni yoqing" #: standalone/drakperm:266 #, c-format msgid "Execute" msgstr "Bajarish" #. -PO: here %s will be either "user", "group" or "other" #: standalone/drakperm:269 #, c-format msgid "Enable \"%s\" to execute the file" msgstr "Faylni bajarish uchun \"%s\"ni yoqing" #: standalone/drakperm:272 #, c-format msgid "Sticky-bit" msgstr "Yopishqoq bit" #: standalone/drakperm:272 #, c-format msgid "" "Used for directory:\n" " only owner of directory or file in this directory can delete it" msgstr "" "Direktoriyalar uchun ishlatiladi:\n" " uni faqat direktoriyaning egasi yoki shu direktoriyadagi fayl o'chirishi " "mumkin" #: standalone/drakperm:273 #, c-format msgid "Set-UID" msgstr "UID'ni o'rnatish" #: standalone/drakperm:273 #, c-format msgid "Use owner id for execution" msgstr "" #: standalone/drakperm:274 #, c-format msgid "Set-GID" msgstr "GID'ni o'rnatish" #: standalone/drakperm:274 #, c-format msgid "Use group id for execution" msgstr "" #: standalone/drakperm:292 standalone/drakxtv:89 #, c-format msgid "User:" msgstr "Foydalanuvchi:" #: standalone/drakperm:294 #, c-format msgid "Group:" msgstr "Guruh:" #: standalone/drakperm:298 #, c-format msgid "Current user" msgstr "Joriy foydalanuvchi" #: standalone/drakperm:299 #, c-format msgid "When checked, owner and group will not be changed" msgstr "Belgilansa, egasi va gurh o'zgartirilmaydi" #: standalone/drakperm:309 #, c-format msgid "Path selection" msgstr "Yo'lni tanlash" #: standalone/drakperm:329 #, c-format msgid "Property" msgstr "Egalik" #: standalone/drakroam:41 #, c-format msgid "" "You do not have any wireless interface.\n" "Run the \"%s\" assistant from the Mandriva Linux Control Center" msgstr "" #: standalone/drakroam:141 #, c-format msgid "ESSID" msgstr "" #: standalone/drakroam:142 standalone/drakvpn:1129 #, c-format msgid "Mode" msgstr "Usul" #: standalone/drakroam:143 standalone/harddrake2:97 #, c-format msgid "Channel" msgstr "Kanal" #: standalone/drakroam:145 #, c-format msgid "Key" msgstr "" #: standalone/drakroam:161 #, c-format msgid "Network:" msgstr "" #: standalone/drakroam:162 #, c-format msgid "IP:" msgstr "" #: standalone/drakroam:164 #, c-format msgid "Mode:" msgstr "" #: standalone/drakroam:165 #, c-format msgid "Encryption:" msgstr "" #: standalone/drakroam:166 #, c-format msgid "Signal:" msgstr "" #: standalone/drakroam:180 #, c-format msgid "Roaming" msgstr "" #: standalone/drakroam:183 standalone/drakroam:266 #, c-format msgid "Roaming: %s" msgstr "" #: standalone/drakroam:183 standalone/drakroam:265 standalone/drakvpn:1047 #: standalone/drakvpn:1063 standalone/drakvpn:1076 #, c-format msgid "off" msgstr "" #: standalone/drakroam:190 #, c-format msgid "Scan interval (sec): " msgstr "" #: standalone/drakroam:193 #, c-format msgid "Set" msgstr "" #: standalone/drakroam:198 #, c-format msgid "Known Networks (Drag up/down or edit)" msgstr "" #: standalone/drakroam:206 #, c-format msgid "Connect" msgstr "Ulash" #: standalone/drakroam:214 #, c-format msgid "Available Networks" msgstr "" #: standalone/drakroam:229 #, c-format msgid "Rescan" msgstr "" #: standalone/drakroam:233 #, c-format msgid "Status" msgstr "Holati" #: standalone/drakroam:240 #, c-format msgid "Disconnect" msgstr "" #. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/drakroam:241 standalone/printerdrake:238 #, c-format msgid "Refresh" msgstr "Yangilash" #: standalone/drakroam:265 standalone/drakvpn:1047 standalone/drakvpn:1063 #: standalone/drakvpn:1076 #, c-format msgid "on" msgstr "" #: standalone/draksec:49 #, c-format msgid "ALL" msgstr "HAMMASI" #: standalone/draksec:50 #, c-format msgid "LOCAL" msgstr "LOKAL" #: standalone/draksec:53 #, c-format msgid "Ignore" msgstr "E'tibor bermash" #. -PO: Do not alter the and tags. #. -PO: Translate the security levels (Poor, Standard, High, Higher and Paranoid) in the same way, you translated these individuals words. #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX. #: standalone/draksec:101 #, c-format msgid "" "Here, you can setup the security level and administrator of your machine.\n" "\n" "\n" "The 'Security Administrator' is the one who " "will receive security alerts if the\n" "'Security Alerts' option is set. It can be a " "username or an email.\n" "\n" "\n" "The 'Security Level' menu allows you to select " "one of the six preconfigured security levels\n" "provided with msec. These levels range from 'poor' security and ease of use, to\n" "'paranoid' config, suitable for very sensitive " "server applications:\n" "\n" "\n" "Poor: This is a totally unsafe but " "very\n" "easy to use security level. It should only be used for machines not " "connected to\n" "any network and that are not accessible to everybody.\n" "\n" "\n" "Standard: This is the standard " "security\n" "recommended for a computer that will be used to connect to the Internet as " "a\n" "client.\n" "\n" "\n" "High: There are already some\n" "restrictions, and more automatic checks are run every night.\n" "\n" "\n" "Higher: The security is now high " "enough\n" "to use the system as a server which can accept connections from many " "clients. If\n" "your machine is only a client on the Internet, you should choose a lower " "level.\n" "\n" "\n" "Paranoid: This is similar to the " "previous\n" "level, but the system is entirely closed and security features are at their\n" "maximum" msgstr "" #: standalone/draksec:154 standalone/harddrake2:208 #, c-format msgid "" "Description of the fields:\n" "\n" msgstr "" "Maydonlarning ta'rifi:\n" "\n" #: standalone/draksec:168 #, c-format msgid "(default value: %s)" msgstr "(andoza qiymati: %s)" #: standalone/draksec:210 #, c-format msgid "Security Level:" msgstr "Xavfsizlik darajasi:" #: standalone/draksec:217 #, c-format msgid "Security Administrator:" msgstr "Xavfsizlik boshqaruvchisi:" #: standalone/draksec:219 #, c-format msgid "Basic options" msgstr "Asosiy parametrlar" #: standalone/draksec:233 #, c-format msgid "Network Options" msgstr "Tarmoqning parametrlari" #: standalone/draksec:233 #, c-format msgid "System Options" msgstr "Tizimning parametrlari" #: standalone/draksec:268 #, c-format msgid "Periodic Checks" msgstr "Davriy tekshiruvlar" #: standalone/draksec:298 #, c-format msgid "Please wait, setting security level..." msgstr "Iltimos kutib turing, xavfsizlik darajasi o'rnatilmoqda" #: standalone/draksec:304 #, c-format msgid "Please wait, setting security options..." msgstr "Iltimos kutib turing, xavfsizlik darajasi o'rnatilmoqda..." #: standalone/draksound:47 #, c-format msgid "No Sound Card detected!" msgstr "Tovush kartasi topilmadi!" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: standalone/draksound:50 #, c-format msgid "" "No Sound Card has been detected on your machine. Please verify that a Linux-" "supported Sound Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.mandrivalinux.com/en/hardware.php3" msgstr "" #: standalone/draksound:57 #, c-format msgid "" "\n" "\n" "\n" "Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or " "the sndconfig program. Just type \"alsaconf\" or \"sndconfig\" in a console." msgstr "" "\n" "\n" "\n" "Izoh: agar sizda ISA PnP tovush kartasi bo'lsa, alsaconf yoki sndconfig " "dasturini ishlatishingiz kerak bo'ladi. Konsolda \"alsaconf\" yoki " "\"sndconfig\" buyrug'ini bajaring xolos." #: standalone/draksplash:15 #, c-format msgid "" "package 'ImageMagick' is required to be able to complete configuration.\n" "Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit" msgstr "" "o'rnatishni tugatish uchun \"ImageMagick\" paketi kerak.\n" "\"ImageMagick\" paketini o'rnatish uchun \"Ok\"ni yoki chiqish uchun \"Bekor " "qilish\"ni bosing." #: standalone/draksplash:34 #, c-format msgid "" "x coordinate of text box\n" "in number of characters" msgstr "" "matn oynasining x koordinatasi\n" "belgilar sonida" #: standalone/draksplash:35 #, c-format msgid "" "y coordinate of text box\n" "in number of characters" msgstr "" #: standalone/draksplash:36 #, c-format msgid "text width" msgstr "Matnning eni" #: standalone/draksplash:37 #, c-format msgid "text box height" msgstr "" #: standalone/draksplash:38 #, c-format msgid "" "the progress bar x coordinate\n" "of its upper left corner" msgstr "" "bajarish ko'rsatgichining\n" "yuqori chap burchagining koordinatasi" #: standalone/draksplash:39 #, c-format msgid "" "the progress bar y coordinate\n" "of its upper left corner" msgstr "" "Bajarish ko'rsatgichining y koordinatasi\n" "uning yuuqori-chap burchagi" #: standalone/draksplash:40 #, c-format msgid "the width of the progress bar" msgstr "bajarish ko'rsatgichining eni" #: standalone/draksplash:41 #, c-format msgid "the height of the progress bar" msgstr "bajarish ko'rsatgichining balandligi" #: standalone/draksplash:58 standalone/draksplash:63 #, c-format msgid "Choose progress bar color" msgstr "" #: standalone/draksplash:59 standalone/draksplash:64 #, c-format msgid "Choose picture" msgstr "" #: standalone/draksplash:60 #, c-format msgid "Silent bootsplash" msgstr "" #: standalone/draksplash:65 #, c-format msgid "Verbose bootsplash" msgstr "" #: standalone/draksplash:67 #, c-format msgid "Display logo on Console" msgstr "Konsolda belgini ko'rsatish" #: standalone/draksplash:70 #, c-format msgid "Console bootsplash" msgstr "" #: standalone/draksplash:76 #, c-format msgid "Theme name" msgstr "Mavzuning nomi" #: standalone/draksplash:79 #, c-format msgid "final resolution" msgstr "" #: standalone/draksplash:84 #, c-format msgid "Save theme" msgstr "Mavzuni saqlash" #: standalone/draksplash:145 #, c-format msgid "saving Bootsplash theme..." msgstr "Bootsplash mavzusi saqlanmoqda..." #: standalone/draksplash:159 #, c-format msgid "Unable to load image file %s" msgstr "" #: standalone/draksplash:169 #, c-format msgid "choose image" msgstr "Rasmni tanlash" #: standalone/draksplash:186 #, c-format msgid "ProgressBar color selection" msgstr "Bajarish ko'rsatgichining rangini tanlash" #: standalone/drakups:74 #, c-format msgid "Connected through a serial port or an usb cable" msgstr "" #: standalone/drakups:80 #, c-format msgid "Add an UPS device" msgstr "UPS uskunasini qo'shish" #: standalone/drakups:83 #, c-format msgid "" "Welcome to the UPS configuration utility.\n" "\n" "Here, you'll add a new UPS to your system.\n" msgstr "" #: standalone/drakups:90 #, c-format msgid "" "We're going to add an UPS device.\n" "\n" "Do you want to autodetect UPS devices connected to this machine or to " "manually select them?" msgstr "" #: standalone/drakups:93 #, c-format msgid "Autodetection" msgstr "Avto-aniqlash" #: standalone/drakups:101 standalone/harddrake2:245 #, c-format msgid "Detection in progress" msgstr "Aniqlash ketayapti" #: standalone/drakups:120 standalone/drakups:159 standalone/logdrake:449 #: standalone/logdrake:455 #, c-format msgid "Congratulations" msgstr "Tabriklaymiz!" #: standalone/drakups:121 #, c-format msgid "The wizard successfully added the following UPS devices:" msgstr "" #: standalone/drakups:123 #, c-format msgid "No new UPS devices was found" msgstr "Hech qanday UPS uskuna topilmadi" #: standalone/drakups:128 standalone/drakups:140 #, c-format msgid "UPS driver configuration" msgstr "UPS drayverini moslash" #: standalone/drakups:128 #, c-format msgid "Please select your UPS model." msgstr "Iltimos UPS modelini tanlang." #: standalone/drakups:129 #, c-format msgid "Manufacturer / Model:" msgstr "Ishlab chiqaruvchi / model:" #: standalone/drakups:140 #, c-format msgid "" "We are configuring the \"%s\" UPS from \"%s\".\n" "Please fill in its name, its driver and its port." msgstr "" #: standalone/drakups:145 #, c-format msgid "Name:" msgstr "Nomi:" #: standalone/drakups:145 #, c-format msgid "The name of your ups" msgstr "UPS nomi" #: standalone/drakups:146 #, c-format msgid "The driver that manages your ups" msgstr "" #: standalone/drakups:147 #, c-format msgid "Port:" msgstr "Port:" #: standalone/drakups:149 #, c-format msgid "The port on which is connected your ups" msgstr "UPS ulangan port" #: standalone/drakups:159 #, c-format msgid "The wizard successfully configured the new \"%s\" UPS device." msgstr "" #: standalone/drakups:250 #, c-format msgid "UPS devices" msgstr "UPS uskunalar" #: standalone/drakups:251 standalone/drakups:270 standalone/drakups:286 #: standalone/harddrake2:85 standalone/harddrake2:111 #: standalone/harddrake2:118 #, c-format msgid "Name" msgstr "Nomi" #: standalone/drakups:269 #, c-format msgid "UPS users" msgstr "UPS foydalanuvchilari" #: standalone/drakups:285 #, c-format msgid "Access Control Lists" msgstr "" #: standalone/drakups:286 #, c-format msgid "IP mask" msgstr "" #: standalone/drakups:298 #, c-format msgid "Rules" msgstr "Qoidalar" #: standalone/drakups:299 #, c-format msgid "Action" msgstr "Amal" #: standalone/drakups:299 standalone/drakvpn:1132 standalone/harddrake2:82 #, c-format msgid "Level" msgstr "Daraja" #: standalone/drakups:299 #, c-format msgid "ACL name" msgstr "ACL nomi" #: standalone/drakups:329 standalone/drakups:333 standalone/drakups:342 #, c-format msgid "DrakUPS" msgstr "DrakUPS" #: standalone/drakups:339 #, c-format msgid "Welcome to the UPS configuration tools" msgstr "UPS uskunasini moslash vositasiga marhamat" #: standalone/drakvpn:73 #, c-format msgid "DrakVPN" msgstr "DrakVPN" #: standalone/drakvpn:95 #, c-format msgid "The VPN connection is enabled." msgstr "VPN aloqasi yoqilgan." #: standalone/drakvpn:96 #, c-format msgid "" "The setup of a VPN connection has already been done.\n" "\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" #: standalone/drakvpn:101 #, c-format msgid "disable" msgstr "o'chirish" #: standalone/drakvpn:101 standalone/drakvpn:127 #, c-format msgid "reconfigure" msgstr "Boshqadan moslash" #: standalone/drakvpn:101 standalone/drakvpn:127 standalone/drakvpn:362 #: standalone/drakvpn:721 #, c-format msgid "dismiss" msgstr "voz kechish" #: standalone/drakvpn:105 #, c-format msgid "Disabling VPN..." msgstr "VPN o'chirilmoqda..." #: standalone/drakvpn:114 #, c-format msgid "The VPN connection is now disabled." msgstr "" #: standalone/drakvpn:121 #, c-format msgid "VPN connection currently disabled" msgstr "" #: standalone/drakvpn:122 #, c-format msgid "" "The setup of a VPN connection has already been done.\n" "\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" #: standalone/drakvpn:127 #, c-format msgid "enable" msgstr "yoqish" #: standalone/drakvpn:135 #, c-format msgid "Enabling VPN..." msgstr "VPN yoqilmoqda..." #: standalone/drakvpn:141 #, c-format msgid "The VPN connection is now enabled." msgstr "" #: standalone/drakvpn:155 standalone/drakvpn:183 #, c-format msgid "Simple VPN setup." msgstr "" #: standalone/drakvpn:156 #, c-format msgid "" "You are about to configure your computer to use a VPN connection.\n" "\n" "With this feature, computers on your local private network and computers\n" "on some other remote private networks, can share resources, through\n" "their respective firewalls, over the Internet, in a secure manner. \n" "\n" "The communication over the Internet is encrypted. The local and remote\n" "computers look as if they were on the same network.\n" "\n" "Make sure you have configured your Network/Internet access using\n" "drakconnect before going any further." msgstr "" #: standalone/drakvpn:184 #, c-format msgid "" "VPN connection.\n" "\n" "This program is based on the following projects:\n" " - FreeSwan: \t\t\thttp://www.freeswan.org/\n" " - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n" " - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n" " - ipsec-howto: \t\thttp://www.ipsec-howto.org\n" " - the docs and man pages coming with the %s package\n" "\n" "Please read AT LEAST the ipsec-howto docs\n" "before going any further." msgstr "" #: standalone/drakvpn:196 #, c-format msgid "Kernel module." msgstr "Kernelning moduli." #: standalone/drakvpn:197 #, c-format msgid "" "The kernel needs to have ipsec support.\n" "\n" "You're running a %s kernel version.\n" "\n" "This kernel has '%s' support." msgstr "" #: standalone/drakvpn:264 #, c-format msgid "Problems installing package %s" msgstr "Paketni (%s) o'rnatishda muammolar paydo bo'ldi" #: standalone/drakvpn:278 #, c-format msgid "Security Policies" msgstr "Xavfsizlik qoidalari" #: standalone/drakvpn:278 #, c-format msgid "IKE daemon racoon" msgstr "" #: standalone/drakvpn:281 standalone/drakvpn:292 #, c-format msgid "Configuration file" msgstr "Moslama fayli" #: standalone/drakvpn:282 #, c-format msgid "" "Configuration step!\n" "\n" "You need to define the Security Policies and then to \n" "configure the automatic key exchange (IKE) daemon. \n" "The KAME IKE daemon we're using is called 'racoon'.\n" "\n" "What would you like to configure?\n" msgstr "" #: standalone/drakvpn:293 #, c-format msgid "" "Next, we will configure the %s file.\n" "\n" "\n" "Simply click on Next.\n" msgstr "" #: standalone/drakvpn:311 standalone/drakvpn:671 #, c-format msgid "%s entries" msgstr "" #: standalone/drakvpn:312 #, c-format msgid "" "The %s file contents\n" "is divided into sections.\n" "\n" "You can now:\n" "\n" " - display, add, edit, or remove sections, then\n" " - commit the changes\n" "\n" "What would you like to do?\n" msgstr "" #: standalone/drakvpn:319 standalone/drakvpn:680 #, c-format msgid "" "_:display here is a verb\n" "Display" msgstr "" #: standalone/drakvpn:319 standalone/drakvpn:680 #, c-format msgid "Commit" msgstr "" #: standalone/drakvpn:333 standalone/drakvpn:337 standalone/drakvpn:695 #: standalone/drakvpn:699 #, c-format msgid "" "_:display here is a verb\n" "Display configuration" msgstr "Moslamani ko'rsatish" #: standalone/drakvpn:338 #, c-format msgid "" "The %s file does not exist.\n" "\n" "This must be a new configuration.\n" "\n" "You'll have to go back and choose 'add'.\n" msgstr "" #: standalone/drakvpn:354 #, c-format msgid "ipsec.conf entries" msgstr "" #: standalone/drakvpn:355 #, c-format msgid "" "The %s file contains different sections.\n" "\n" "Here is its skeleton:\t'config setup' \n" "\t\t\t\t\t'conn default' \n" "\t\t\t\t\t'normal1'\n" "\t\t\t\t\t'normal2' \n" "\n" "You can now add one of these sections.\n" "\n" "Choose the section you would like to add.\n" msgstr "" #: standalone/drakvpn:362 #, c-format msgid "config setup" msgstr "" #: standalone/drakvpn:362 #, c-format msgid "conn %default" msgstr "" #: standalone/drakvpn:362 #, c-format msgid "normal conn" msgstr "" #: standalone/drakvpn:368 standalone/drakvpn:409 standalone/drakvpn:496 #, c-format msgid "Exists!" msgstr "Mavjud" #: standalone/drakvpn:369 standalone/drakvpn:410 #, c-format msgid "" "A section with this name already exists.\n" "The section names have to be unique.\n" "\n" "You'll have to go back and add another section\n" "or change its name.\n" msgstr "" #: standalone/drakvpn:386 #, c-format msgid "" "This section has to be on top of your\n" "%s file.\n" "\n" "Make sure all other sections follow this config\n" "setup section.\n" "\n" "Choose continue or previous when you are done.\n" msgstr "" #: standalone/drakvpn:391 #, c-format msgid "interfaces" msgstr "Interfeyslar" #: standalone/drakvpn:392 #, c-format msgid "klipsdebug" msgstr "" #: standalone/drakvpn:393 #, c-format msgid "plutodebug" msgstr "" #: standalone/drakvpn:394 #, c-format msgid "plutoload" msgstr "" #: standalone/drakvpn:395 #, c-format msgid "plutostart" msgstr "" #: standalone/drakvpn:396 #, c-format msgid "uniqueids" msgstr "" #: standalone/drakvpn:430 #, c-format msgid "" "This is the first section after the config\n" "setup one.\n" "\n" "Here you define the default settings. \n" "All the other sections will follow this one.\n" "The left settings are optional. If do not define\n" "them here, globally, you can define them in each\n" "section.\n" msgstr "" #: standalone/drakvpn:437 #, c-format msgid "PFS" msgstr "PFS" #: standalone/drakvpn:438 #, c-format msgid "keyingtries" msgstr "" #: standalone/drakvpn:439 #, c-format msgid "compress" msgstr "" #: standalone/drakvpn:440 #, c-format msgid "disablearrivalcheck" msgstr "" #: standalone/drakvpn:441 standalone/drakvpn:480 #, c-format msgid "left" msgstr "Chap" #: standalone/drakvpn:442 standalone/drakvpn:481 #, c-format msgid "leftcert" msgstr "" #: standalone/drakvpn:443 standalone/drakvpn:482 #, c-format msgid "leftrsasigkey" msgstr "" #: standalone/drakvpn:444 standalone/drakvpn:483 #, c-format msgid "leftsubnet" msgstr "" #: standalone/drakvpn:445 standalone/drakvpn:484 #, c-format msgid "leftnexthop" msgstr "" #: standalone/drakvpn:474 #, c-format msgid "" "Your %s file has several sections, or connections.\n" "\n" "You can now add a new section.\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:477 #, c-format msgid "section name" msgstr "" #: standalone/drakvpn:478 #, c-format msgid "authby" msgstr "" #: standalone/drakvpn:479 #, c-format msgid "auto" msgstr "Avto" #: standalone/drakvpn:485 #, c-format msgid "right" msgstr "O'ng" #: standalone/drakvpn:486 #, c-format msgid "rightcert" msgstr "" #: standalone/drakvpn:487 #, c-format msgid "rightrsasigkey" msgstr "" #: standalone/drakvpn:488 #, c-format msgid "rightsubnet" msgstr "" #: standalone/drakvpn:489 #, c-format msgid "rightnexthop" msgstr "" #: standalone/drakvpn:497 #, c-format msgid "" "A section with this name already exists.\n" "The section names have to be unique.\n" "\n" "You'll have to go back and add another section\n" "or change the name of the section.\n" msgstr "" #: standalone/drakvpn:529 #, c-format msgid "" "Add a Security Policy.\n" "\n" "You can now add a Security Policy.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:562 standalone/drakvpn:812 #, c-format msgid "Edit section" msgstr "" #: standalone/drakvpn:563 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here below the one you want to edit \n" "and then click on next.\n" msgstr "" #: standalone/drakvpn:566 standalone/drakvpn:646 standalone/drakvpn:817 #: standalone/drakvpn:863 #, c-format msgid "Section names" msgstr "" #: standalone/drakvpn:576 #, c-format msgid "Can not edit!" msgstr "Tahrirlab bo'lmaydi!" #: standalone/drakvpn:577 #, c-format msgid "" "You cannot edit this section.\n" "\n" "This section is mandatory for Freeswan 2.X.\n" "One has to specify version 2.0 on the top\n" "of the %s file, and eventually, disable or\n" "enable the opportunistic encryption.\n" msgstr "" #: standalone/drakvpn:586 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "You can now edit the config setup section entries.\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:597 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can now edit the default section entries.\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:610 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can now edit the normal section entries.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:631 #, c-format msgid "" "Edit a Security Policy.\n" "\n" "You can now edit a Security Policy.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:642 standalone/drakvpn:859 #, c-format msgid "Remove section" msgstr "" #: standalone/drakvpn:643 standalone/drakvpn:860 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here below the one you want to remove\n" "and then click on next.\n" msgstr "" #: standalone/drakvpn:672 #, c-format msgid "" "The racoon.conf file configuration.\n" "\n" "The contents of this file is divided into sections.\n" "You can now:\n" " - display \t\t (display the file contents)\n" " - add\t\t\t (add one section)\n" " - edit \t\t\t (modify parameters of an existing section)\n" " - remove \t\t (remove an existing section)\n" " - commit \t\t (writes the changes to the real file)" msgstr "" #: standalone/drakvpn:700 #, c-format msgid "" "The %s file does not exist\n" "\n" "This must be a new configuration.\n" "\n" "You'll have to go back and choose configure.\n" msgstr "" #: standalone/drakvpn:714 #, c-format msgid "racoonf.conf entries" msgstr "" #: standalone/drakvpn:715 #, c-format msgid "" "The 'add' sections step.\n" "\n" "Here below is the racoon.conf file skeleton:\n" "\t'path'\n" "\t'remote'\n" "\t'sainfo' \n" "\n" "Choose the section you would like to add.\n" msgstr "" #: standalone/drakvpn:721 #, c-format msgid "path" msgstr "Yo'l" #: standalone/drakvpn:721 #, c-format msgid "remote" msgstr "Masofadagi" #: standalone/drakvpn:721 #, c-format msgid "sainfo" msgstr "" #: standalone/drakvpn:729 #, c-format msgid "" "The 'add path' section step.\n" "\n" "The path sections have to be on top of your racoon.conf file.\n" "\n" "Put your mouse over the certificate entry to obtain online help." msgstr "" #: standalone/drakvpn:732 #, c-format msgid "path type" msgstr "" #: standalone/drakvpn:736 #, c-format msgid "" "path include path: specifies a path to include\n" "a file. See File Inclusion.\n" "\tExample: path include '/etc/racoon'\n" "\n" "path pre_shared_key file: specifies a file containing\n" "pre-shared key(s) for various ID(s). See Pre-shared key File.\n" "\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n" "\n" "path certificate path: racoon(8) will search this directory\n" "if a certificate or certificate request is received.\n" "\tExample: path certificate '/etc/cert' ;\n" "\n" "File Inclusion: include file \n" "other configuration files can be included.\n" "\tExample: include \"remote.conf\" ;\n" "\n" "Pre-shared key File: Pre-shared key file defines a pair\n" "of the identifier and the shared secret key which are used at\n" "Pre-shared key authentication method in phase 1." msgstr "" #: standalone/drakvpn:756 standalone/drakvpn:849 #, c-format msgid "real file" msgstr "" #: standalone/drakvpn:779 #, c-format msgid "" "Make sure you already have the path sections\n" "on the top of your racoon.conf file.\n" "\n" "You can now choose the remote settings.\n" "Choose continue or previous when you are done.\n" msgstr "" #: standalone/drakvpn:796 #, c-format msgid "" "Make sure you already have the path sections\n" "on the top of your %s file.\n" "\n" "You can now choose the sainfo settings.\n" "Choose continue or previous when you are done.\n" msgstr "" #: standalone/drakvpn:813 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here in the list below the one you want\n" "to edit and then click on next.\n" msgstr "" #: standalone/drakvpn:824 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "\n" "You can now edit the remote section entries.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:833 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "You can now edit the sainfo section entries.\n" "\n" "Choose continue when you are done to write the data." msgstr "" #: standalone/drakvpn:841 #, c-format msgid "" "This section has to be on top of your\n" "%s file.\n" "\n" "Make sure all other sections follow these path\n" "sections.\n" "\n" "You can now edit the path entries.\n" "\n" "Choose continue or previous when you are done.\n" msgstr "" #: standalone/drakvpn:848 #, c-format msgid "path_type" msgstr "" #: standalone/drakvpn:889 #, c-format msgid "" "Everything has been configured.\n" "\n" "You may now share resources through the Internet,\n" "in a secure way, using a VPN connection.\n" "\n" "You should make sure that that the tunnels shorewall\n" "section is configured." msgstr "" #: standalone/drakvpn:909 #, c-format msgid "Sainfo source address" msgstr "" #: standalone/drakvpn:910 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\t203.178.141.209 is the source address\n" "\n" "sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n" "\t172.16.1.0/24 is the source address" msgstr "" #: standalone/drakvpn:927 #, c-format msgid "Sainfo source protocol" msgstr "" #: standalone/drakvpn:928 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\tthe first 'any' allows any protocol for the source" msgstr "" #: standalone/drakvpn:942 #, c-format msgid "Sainfo destination address" msgstr "" #: standalone/drakvpn:943 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\t203.178.141.218 is the destination address\n" "\n" "sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n" "\t172.16.2.0/24 is the destination address" msgstr "" #: standalone/drakvpn:960 #, c-format msgid "Sainfo destination protocol" msgstr "" #: standalone/drakvpn:961 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\tthe last 'any' allows any protocol for the destination" msgstr "" #: standalone/drakvpn:975 #, c-format msgid "PFS group" msgstr "" #: standalone/drakvpn:977 #, c-format msgid "" "define the group of Diffie-Hellman exponentiations.\n" "If you do not require PFS then you can omit this directive.\n" "Any proposal will be accepted if you do not specify one.\n" "group is one of the following: modp768, modp1024, modp1536.\n" "Or you can define 1, 2, or 5 as the DH group number." msgstr "" #: standalone/drakvpn:982 #, c-format msgid "Lifetime number" msgstr "" #: standalone/drakvpn:983 #, c-format msgid "" "define a lifetime of a certain time which will be pro-\n" "posed in the phase 1 negotiations. Any proposal will be\n" "accepted, and the attribute(s) will not be proposed to\n" "the peer if you do not specify it(them). They can be\n" "individually specified in each proposal.\n" "\n" "Examples: \n" "\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 30 sec;\n" " lifetime time 30 sec;\n" " lifetime time 60 sec;\n" "\tlifetime time 12 hour;\n" "\n" "So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n" msgstr "" #: standalone/drakvpn:999 #, c-format msgid "Lifetime unit" msgstr "" #: standalone/drakvpn:1001 #, c-format msgid "" "define a lifetime of a certain time which will be pro-\n" "posed in the phase 1 negotiations. Any proposal will be\n" "accepted, and the attribute(s) will not be proposed to\n" "the peer if you do not specify it(them). They can be\n" "individually specified in each proposal.\n" "\n" "Examples: \n" "\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 30 sec;\n" " lifetime time 30 sec;\n" " lifetime time 60 sec;\n" "\tlifetime time 12 hour;\n" "\n" "So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and " "'hour'.\n" msgstr "" #: standalone/drakvpn:1019 #, c-format msgid "Authentication algorithm" msgstr "" #: standalone/drakvpn:1021 #, c-format msgid "Compression algorithm" msgstr "" #: standalone/drakvpn:1022 #, c-format msgid "deflate" msgstr "" #: standalone/drakvpn:1029 #, c-format msgid "Remote" msgstr "Masofadagi" #: standalone/drakvpn:1030 #, c-format msgid "" "remote (address | anonymous) [[port]] { statements }\n" "specifies the parameters for IKE phase 1 for each remote node.\n" "The default port is 500. If anonymous is specified, the state-\n" "ments apply to all peers which do not match any other remote\n" "directive.\n" "\n" "Examples: \n" "\n" "remote anonymous\n" "remote ::1 [8000]" msgstr "" #: standalone/drakvpn:1038 #, c-format msgid "Exchange mode" msgstr "" #: standalone/drakvpn:1040 #, c-format msgid "" "defines the exchange mode for phase 1 when racoon is the\n" "initiator. Also it means the acceptable exchange mode\n" "when racoon is responder. More than one mode can be\n" "specified by separating them with a comma. All of the\n" "modes are acceptable. The first exchange mode is what\n" "racoon uses when it is the initiator.\n" msgstr "" #: standalone/drakvpn:1046 #, c-format msgid "Generate policy" msgstr "Qoidani yaratish" #: standalone/drakvpn:1048 #, c-format msgid "" "This directive is for the responder. Therefore you\n" "should set passive on in order that racoon(8) only\n" "becomes a responder. If the responder does not have any\n" "policy in SPD during phase 2 negotiation, and the direc-\n" "tive is set on, then racoon(8) will choice the first pro-\n" "posal in the SA payload from the initiator, and generate\n" "policy entries from the proposal. It is useful to nego-\n" "tiate with the client which is allocated IP address\n" "dynamically. Note that inappropriate policy might be\n" "installed into the responder's SPD by the initiator. So\n" "that other communication might fail if such policies\n" "installed due to some policy mismatches between the ini-\n" "tiator and the responder. This directive is ignored in\n" "the initiator case. The default value is off." msgstr "" #: standalone/drakvpn:1062 #, c-format msgid "Passive" msgstr "Passiv" #: standalone/drakvpn:1064 #, c-format msgid "" "If you do not want to initiate the negotiation, set this\n" "to on. The default value is off. It is useful for a\n" "server." msgstr "" #: standalone/drakvpn:1067 #, c-format msgid "Certificate type" msgstr "" #: standalone/drakvpn:1069 #, c-format msgid "My certfile" msgstr "" #: standalone/drakvpn:1070 #, c-format msgid "Name of the certificate" msgstr "Sertifikatning nomi" #: standalone/drakvpn:1071 #, c-format msgid "My private key" msgstr "" #: standalone/drakvpn:1072 #, c-format msgid "Name of the private key" msgstr "Shaxsiy kalitning nomi" #: standalone/drakvpn:1073 #, c-format msgid "Peers certfile" msgstr "" #: standalone/drakvpn:1074 #, c-format msgid "Name of the peers certificate" msgstr "" #: standalone/drakvpn:1075 #, c-format msgid "Verify cert" msgstr "Sertifikatni tekshirish" #: standalone/drakvpn:1077 #, c-format msgid "" "If you do not want to verify the peer's certificate for\n" "some reason, set this to off. The default is on." msgstr "" #: standalone/drakvpn:1079 #, c-format msgid "My identifier" msgstr "" #: standalone/drakvpn:1080 #, c-format msgid "" "specifies the identifier sent to the remote host and the\n" "type to use in the phase 1 negotiation. address, FQDN,\n" "user_fqdn, keyid and asn1dn can be used as an idtype.\n" "they are used like:\n" "\tmy_identifier address [address];\n" "\t\tthe type is the IP address. This is the default\n" "\t\ttype if you do not specify an identifier to use.\n" "\tmy_identifier user_fqdn string;\n" "\t\tthe type is a USER_FQDN (user fully-qualified\n" "\t\tdomain name).\n" "\tmy_identifier FQDN string;\n" "\t\tthe type is a FQDN (fully-qualified domain name).\n" "\tmy_identifier keyid file;\n" "\t\tthe type is a KEY_ID.\n" "\tmy_identifier asn1dn [string];\n" "\t\tthe type is an ASN.1 distinguished name. If\n" "\t\tstring is omitted, racoon(8) will get DN from\n" "\t\tSubject field in the certificate.\n" "\n" "Examples: \n" "\n" "my_identifier user_fqdn \"myemail@mydomain.com\"" msgstr "" #: standalone/drakvpn:1100 #, c-format msgid "Peers identifier" msgstr "" #: standalone/drakvpn:1101 #, c-format msgid "Proposal" msgstr "" #: standalone/drakvpn:1103 #, c-format msgid "" "specify the encryption algorithm used for the\n" "phase 1 negotiation. This directive must be defined. \n" "algorithm is one of the following: \n" "\n" "DES, 3DES, blowfish, cast128 for oakley.\n" "\n" "For other transforms, this statement should not be used." msgstr "" #: standalone/drakvpn:1110 #, c-format msgid "Hash algorithm" msgstr "" #: standalone/drakvpn:1112 #, c-format msgid "DH group" msgstr "DH guruhi" #: standalone/drakvpn:1119 #, c-format msgid "Command" msgstr "Buyruq" #: standalone/drakvpn:1120 #, c-format msgid "Source IP range" msgstr "" #: standalone/drakvpn:1121 #, c-format msgid "Destination IP range" msgstr "" #: standalone/drakvpn:1122 #, c-format msgid "Upper-layer protocol" msgstr "" #: standalone/drakvpn:1122 standalone/drakvpn:1129 #, c-format msgid "any" msgstr "" #: standalone/drakvpn:1124 #, c-format msgid "Flag" msgstr "Bayroq" #: standalone/drakvpn:1125 #, c-format msgid "Direction" msgstr "Yo'nalish" #: standalone/drakvpn:1126 #, c-format msgid "IPsec policy" msgstr "" #: standalone/drakvpn:1126 #, c-format msgid "ipsec" msgstr "ipsec" #: standalone/drakvpn:1126 #, c-format msgid "discard" msgstr "" #: standalone/drakvpn:1129 #, c-format msgid "tunnel" msgstr "" #: standalone/drakvpn:1129 #, c-format msgid "transport" msgstr "" #: standalone/drakvpn:1131 #, c-format msgid "Source/destination" msgstr "Manba/Manzil" #: standalone/drakvpn:1132 #, c-format msgid "require" msgstr "" #: standalone/drakvpn:1132 #, c-format msgid "default" msgstr "andoza" #: standalone/drakvpn:1132 #, c-format msgid "use" msgstr "" #: standalone/drakvpn:1132 #, c-format msgid "unique" msgstr "" #: standalone/drakxtv:45 #, c-format msgid "USA (broadcast)" msgstr "" #: standalone/drakxtv:45 #, c-format msgid "USA (cable)" msgstr "AQSh (kabel)" #: standalone/drakxtv:45 #, c-format msgid "USA (cable-hrc)" msgstr "" #: standalone/drakxtv:45 #, c-format msgid "Canada (cable)" msgstr "Kanada (kabel)" #: standalone/drakxtv:46 #, c-format msgid "Japan (broadcast)" msgstr "" #: standalone/drakxtv:46 #, c-format msgid "Japan (cable)" msgstr "Yaponiya (kabel)" #: standalone/drakxtv:46 #, c-format msgid "China (broadcast)" msgstr "" #: standalone/drakxtv:47 #, c-format msgid "West Europe" msgstr "G'arbiy Oyropa" #: standalone/drakxtv:47 #, c-format msgid "East Europe" msgstr "Sharqiy Oyropa" #: standalone/drakxtv:47 #, c-format msgid "France [SECAM]" msgstr "Frantsiya [SECAM]" #: standalone/drakxtv:48 #, c-format msgid "Newzealand" msgstr "Yangi Zelandiya" #: standalone/drakxtv:51 #, c-format msgid "Australian Optus cable TV" msgstr "Avstraliya kabel TV Optus" #: standalone/drakxtv:85 #, c-format msgid "" "Please,\n" "type in your tv norm and country" msgstr "" "Iltimos\n" "davlatingizni va TV formatingizni kiriting" #: standalone/drakxtv:87 #, c-format msgid "TV norm:" msgstr "TV formati:" #: standalone/drakxtv:88 #, c-format msgid "Area:" msgstr "" #: standalone/drakxtv:93 #, c-format msgid "Scanning for TV channels in progress..." msgstr "" #: standalone/drakxtv:103 #, c-format msgid "Scanning for TV channels" msgstr "" #: standalone/drakxtv:107 #, c-format msgid "There was an error while scanning for TV channels" msgstr "" #: standalone/drakxtv:110 #, c-format msgid "Have a nice day!" msgstr "Kuningiz maroqli o'tsin!" #: standalone/drakxtv:111 #, c-format msgid "Now, you can run xawtv (under X Window!) !\n" msgstr "" #: standalone/drakxtv:149 #, c-format msgid "No TV Card detected!" msgstr "TV karta topilmadi!" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: standalone/drakxtv:151 #, c-format msgid "" "No TV Card has been detected on your machine. Please verify that a Linux-" "supported Video/TV Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.mandrivalinux.com/en/hardware.php3" msgstr "" #: standalone/harddrake2:25 #, c-format msgid "Alternative drivers" msgstr "Boshqa drayverlar" #: standalone/harddrake2:26 #, c-format msgid "the list of alternative drivers for this sound card" msgstr "Tovush kartasi uchun boshqa drayverlarning ro'yxati" #: standalone/harddrake2:29 #, c-format msgid "" "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" msgstr "" #: standalone/harddrake2:31 standalone/harddrake2:146 #, c-format msgid "Bus identification" msgstr "" #: standalone/harddrake2:32 #, c-format msgid "" "- PCI and USB devices: this lists the vendor, device, subvendor and " "subdevice PCI/USB ids" msgstr "" #: standalone/harddrake2:35 #, c-format msgid "" "- pci devices: this gives the PCI slot, device and function of this card\n" "- eide devices: the device is either a slave or a master device\n" "- scsi devices: the scsi bus and the scsi device ids" msgstr "" #: standalone/harddrake2:38 #, c-format msgid "Drive capacity" msgstr "Uskunaning hajmi" #: standalone/harddrake2:38 #, c-format msgid "special capacities of the driver (burning ability and or DVD support)" msgstr "" #: standalone/harddrake2:39 #, c-format msgid "this field describes the device" msgstr "bu maydon uskunani ta'riflaydi" #: standalone/harddrake2:40 #, c-format msgid "Old device file" msgstr "Uskunaning eski fayli" #: standalone/harddrake2:41 #, c-format msgid "old static device name used in dev package" msgstr "" #: standalone/harddrake2:42 #, c-format msgid "New devfs device" msgstr "Yangi devfs uskunasi" #: standalone/harddrake2:43 #, c-format msgid "new dynamic device name generated by core kernel devfs" msgstr "" #. -PO: here "module" is the "jargon term" for a kernel driver #: standalone/harddrake2:46 #, c-format msgid "Module" msgstr "Modul" #: standalone/harddrake2:46 #, c-format msgid "the module of the GNU/Linux kernel that handles the device" msgstr "" #: standalone/harddrake2:47 #, c-format msgid "Extended partitions" msgstr "Diskning kengaytirilgan qismlari" #: standalone/harddrake2:47 #, c-format msgid "the number of extended partitions" msgstr "diskning kengaytirilgan qismlar soni" #: standalone/harddrake2:48 #, c-format msgid "Geometry" msgstr "Geometriya" #: standalone/harddrake2:48 #, c-format msgid "Cylinder/head/sectors geometry of the disk" msgstr "" #: standalone/harddrake2:49 #, c-format msgid "Disk controller" msgstr "Disk kontrolleri" #: standalone/harddrake2:49 #, c-format msgid "the disk controller on the host side" msgstr "" #: standalone/harddrake2:50 #, c-format msgid "class of hardware device" msgstr "asbob-uskunanig sinfi" #: standalone/harddrake2:51 standalone/harddrake2:83 #: standalone/printerdrake:211 #, c-format msgid "Model" msgstr "Model" #: standalone/harddrake2:51 #, c-format msgid "hard disk model" msgstr "qattiq diskning modeli" #: standalone/harddrake2:52 #, c-format msgid "network printer port" msgstr "tarmoqdagi printerning porti" #: standalone/harddrake2:53 #, c-format msgid "Primary partitions" msgstr "Diskning asosiy qismlari" #: standalone/harddrake2:53 #, c-format msgid "the number of the primary partitions" msgstr "diskning asosiy qismlar soni" #: standalone/harddrake2:54 #, c-format msgid "the vendor name of the device" msgstr "Uskunani ishlab chiqargan firmaning nomi" #: standalone/harddrake2:55 #, c-format msgid "Bus PCI #" msgstr "" #: standalone/harddrake2:55 #, c-format msgid "the PCI bus on which the device is plugged" msgstr "" #: standalone/harddrake2:56 #, c-format msgid "PCI device #" msgstr "PCI uskuna #" #: standalone/harddrake2:56 #, c-format msgid "PCI device number" msgstr "PCI uskunaning raqami" #: standalone/harddrake2:57 #, c-format msgid "PCI function #" msgstr "" #: standalone/harddrake2:57 #, fuzzy, c-format msgid "PCI function number" msgstr "Ulanishning nomi" #: standalone/harddrake2:58 #, fuzzy, c-format msgid "Vendor ID" msgstr "Ishlab chiqaruvchi" #: standalone/harddrake2:58 #, c-format msgid "this is the standard numerical identifier of the vendor" msgstr "" #: standalone/harddrake2:59 #, fuzzy, c-format msgid "Device ID" msgstr "Uskuna: " #: standalone/harddrake2:59 #, fuzzy, c-format msgid "this is the numerical identifier of the device" msgstr "Uskunani ishlab chiqargan firmaning nomi" #: standalone/harddrake2:60 #, c-format msgid "Sub vendor ID" msgstr "" #: standalone/harddrake2:60 #, c-format msgid "this is the minor numerical identifier of the vendor" msgstr "" #: standalone/harddrake2:61 #, fuzzy, c-format msgid "Sub device ID" msgstr "UPS uskunalar" #: standalone/harddrake2:61 #, fuzzy, c-format msgid "this is the minor numerical identifier of the device" msgstr "Uskunani ishlab chiqargan firmaning nomi" #: standalone/harddrake2:62 #, fuzzy, c-format msgid "Device USB ID" msgstr "Uskuna: " #: standalone/harddrake2:62 #, c-format msgid ".." msgstr "" #: standalone/harddrake2:66 #, c-format msgid "Bogomips" msgstr "Bogomips" #: standalone/harddrake2:66 #, c-format msgid "" "the GNU/Linux kernel needs to run a calculation loop at boot time to " "initialize a timer counter. Its result is stored as bogomips as a way to " "\"benchmark\" the cpu." msgstr "" #: standalone/harddrake2:67 #, c-format msgid "Cache size" msgstr "Keshning hajmi" #: standalone/harddrake2:67 #, c-format msgid "size of the (second level) cpu cache" msgstr "protsessor keshining (ikkinchi daraja) hajmi" #. -PO: here "comas" is the medical coma, not the lexical coma!! #: standalone/harddrake2:70 #, c-format msgid "Coma bug" msgstr "Vergul xatosi" #: standalone/harddrake2:70 #, c-format msgid "whether this cpu has the Cyrix 6x86 Coma bug" msgstr "" #: standalone/harddrake2:71 #, c-format msgid "Cpuid family" msgstr "Cpuid oilasi" #: standalone/harddrake2:71 #, c-format msgid "family of the cpu (eg: 6 for i686 class)" msgstr "protsessorning oilasi (m-n: i686 sinfi uchun 6)" #: standalone/harddrake2:72 #, c-format msgid "Cpuid level" msgstr "Cpuid' ning darajasi" #: standalone/harddrake2:72 #, c-format msgid "information level that can be obtained through the cpuid instruction" msgstr "" #: standalone/harddrake2:73 #, c-format msgid "Frequency (MHz)" msgstr "Chastota (MGts)" #: standalone/harddrake2:73 #, c-format msgid "" "the CPU frequency in MHz (Megahertz which in first approximation may be " "coarsely assimilated to number of instructions the cpu is able to execute " "per second)" msgstr "" #: standalone/harddrake2:74 #, c-format msgid "Flags" msgstr "Bayroqlar" #: standalone/harddrake2:74 #, c-format msgid "CPU flags reported by the kernel" msgstr "" #: standalone/harddrake2:75 #, c-format msgid "Fdiv bug" msgstr "Fdiv xatosi" #: standalone/harddrake2:76 #, c-format msgid "" "Early Intel Pentium chips manufactured have a bug in their floating point " "processor which did not achieve the required precision when performing a " "Floating point DIVision (FDIV)" msgstr "" #: standalone/harddrake2:77 #, c-format msgid "Is FPU present" msgstr "FPU mavjudmi" #: standalone/harddrake2:77 #, c-format msgid "yes means the processor has an arithmetic coprocessor" msgstr "" #: standalone/harddrake2:78 #, c-format msgid "Whether the FPU has an irq vector" msgstr "" #: standalone/harddrake2:78 #, c-format msgid "yes means the arithmetic coprocessor has an exception vector attached" msgstr "" #: standalone/harddrake2:79 #, c-format msgid "F00f bug" msgstr "F00f xatosi" #: standalone/harddrake2:79 #, c-format msgid "early pentiums were buggy and freezed when decoding the F00F bytecode" msgstr "" #: standalone/harddrake2:80 #, c-format msgid "Halt bug" msgstr "Halt xatosi" #: standalone/harddrake2:81 #, c-format msgid "" "Some of the early i486DX-100 chips cannot reliably return to operating mode " "after the \"halt\" instruction is used" msgstr "" #: standalone/harddrake2:82 #, c-format msgid "sub generation of the cpu" msgstr "" #: standalone/harddrake2:83 #, c-format msgid "generation of the cpu (eg: 8 for Pentium III, ...)" msgstr "protsessorning avlodi (m-n: Pentium III uchun 8,...)" #: standalone/harddrake2:84 #, c-format msgid "Model name" msgstr "Modelning nomi" #: standalone/harddrake2:84 #, c-format msgid "official vendor name of the cpu" msgstr "protsessor ishlab chiqaruvchining rasmiy nomi" #: standalone/harddrake2:85 #, c-format msgid "the name of the CPU" msgstr "protsessorning nomi" #: standalone/harddrake2:86 #, c-format msgid "Processor ID" msgstr "Protsessorning ID-si" #: standalone/harddrake2:86 #, c-format msgid "the number of the processor" msgstr "protsessorlar soni" #: standalone/harddrake2:87 #, c-format msgid "Model stepping" msgstr "" #: standalone/harddrake2:87 #, c-format msgid "stepping of the cpu (sub model (generation) number)" msgstr "" #: standalone/harddrake2:88 #, c-format msgid "the vendor name of the processor" msgstr "Protsessorni ishlab chiqargan firmaning nomi" #: standalone/harddrake2:89 #, c-format msgid "Write protection" msgstr "Yozishdan himoyalash" #: standalone/harddrake2:89 #, c-format msgid "" "the WP flag in the CR0 register of the cpu enforce write protection at the " "memory page level, thus enabling the processor to prevent unchecked kernel " "accesses to user memory (aka this is a bug guard)" msgstr "" #: standalone/harddrake2:93 #, c-format msgid "Floppy format" msgstr "Disketning formati" #: standalone/harddrake2:93 #, c-format msgid "format of floppies supported by the drive" msgstr "" #: standalone/harddrake2:97 #, c-format msgid "EIDE/SCSI channel" msgstr "EIDE/SCSI kanal" #: standalone/harddrake2:98 #, c-format msgid "Disk identifier" msgstr "" #: standalone/harddrake2:98 #, c-format msgid "usually the disk serial number" msgstr "" #: standalone/harddrake2:99 #, fuzzy, c-format msgid "Logical unit number" msgstr "Lokal printer" #: standalone/harddrake2:99 #, c-format msgid "" "the SCSI target number (LUN). SCSI devices connected to a host are uniquely " "identified by a\n" "channel number, a target id and a logical unit number" msgstr "" #. -PO: here, "size" is the size of the ram chip (eg: 128Mo, 256Mo, ...) #: standalone/harddrake2:106 #, fuzzy, c-format msgid "Installed size" msgstr "Tizimni o'rnatish" #: standalone/harddrake2:106 #, c-format msgid "Installed size of the memory bank" msgstr "" #: standalone/harddrake2:107 #, fuzzy, c-format msgid "Enabled Size" msgstr "Yoqilgan" #: standalone/harddrake2:107 #, c-format msgid "Enabled size of the memory bank" msgstr "" #: standalone/harddrake2:108 #, fuzzy, c-format msgid "type of the memory device" msgstr "Uskunani ishlab chiqargan firmaning nomi" #: standalone/harddrake2:109 #, c-format msgid "Speed" msgstr "" #: standalone/harddrake2:109 #, c-format msgid "Speed of the memory bank" msgstr "" #: standalone/harddrake2:110 #, fuzzy, c-format msgid "Bank connections" msgstr "Aloqalarni boshqarish" #: standalone/harddrake2:111 #, c-format msgid "Socket designation of the memory bank" msgstr "" #: standalone/harddrake2:115 #, c-format msgid "Device file" msgstr "Uskunaning fayli" #: standalone/harddrake2:115 #, c-format msgid "" "the device file used to communicate with the kernel driver for the mouse" msgstr "" #: standalone/harddrake2:116 #, c-format msgid "Emulated wheel" msgstr "" #: standalone/harddrake2:116 #, c-format msgid "whether the wheel is emulated or not" msgstr "" #: standalone/harddrake2:117 #, c-format msgid "the type of the mouse" msgstr "sichqonchaning turi" #: standalone/harddrake2:118 #, c-format msgid "the name of the mouse" msgstr "sichqonchaning nomi" #: standalone/harddrake2:119 #, c-format msgid "Number of buttons" msgstr "Tugmalar soni" #: standalone/harddrake2:119 #, c-format msgid "the number of buttons the mouse has" msgstr "sichqonchadagi tugmalar soni" #: standalone/harddrake2:120 #, c-format msgid "the type of bus on which the mouse is connected" msgstr "" #: standalone/harddrake2:121 #, c-format msgid "Mouse protocol used by X11" msgstr "" #: standalone/harddrake2:121 #, c-format msgid "the protocol that the graphical desktop use with the mouse" msgstr "" #: standalone/harddrake2:128 standalone/harddrake2:137 #: standalone/harddrake2:144 standalone/harddrake2:152 #: standalone/harddrake2:318 #, fuzzy, c-format msgid "Identification" msgstr "tasdiqlash" #: standalone/harddrake2:129 standalone/harddrake2:145 #, c-format msgid "Connection" msgstr "Ulanish" #: standalone/harddrake2:138 #, c-format msgid "Performances" msgstr "Unumdorlik" #: standalone/harddrake2:139 #, c-format msgid "Bugs" msgstr "Xatolar" #: standalone/harddrake2:140 #, c-format msgid "FPU" msgstr "" #: standalone/harddrake2:147 #, c-format msgid "Device" msgstr "Uskuna" #: standalone/harddrake2:148 #, c-format msgid "Partitions" msgstr "Diskning qismlari" #: standalone/harddrake2:153 #, c-format msgid "Features" msgstr "" #. -PO: please keep all "/" characters !!! #: standalone/harddrake2:176 standalone/logdrake:76 #: standalone/printerdrake:134 standalone/printerdrake:147 #, c-format msgid "/_Options" msgstr "/_Parametrlar" #: standalone/harddrake2:177 standalone/harddrake2:203 standalone/logdrake:78 #: standalone/printerdrake:159 standalone/printerdrake:161 #: standalone/printerdrake:164 standalone/printerdrake:166 #, c-format msgid "/_Help" msgstr "/_Yordam" #: standalone/harddrake2:181 #, c-format msgid "/Autodetect _printers" msgstr "/Printerlarni _avto-aniqlash" #: standalone/harddrake2:182 #, c-format msgid "/Autodetect _modems" msgstr "/_Modemlarni avto-aniqlash" #: standalone/harddrake2:183 #, c-format msgid "/Autodetect _jaz drives" msgstr "/_Jaz uskunalarini avto-aniqlash" #: standalone/harddrake2:184 #, c-format msgid "/Autodetect parallel _zip drives" msgstr "" #: standalone/harddrake2:191 #, c-format msgid "/_Upload the hardware list" msgstr "" #: standalone/harddrake2:192 standalone/printerdrake:140 #, c-format msgid "/_Quit" msgstr "/Chi_qish" #: standalone/harddrake2:205 #, c-format msgid "/_Fields description" msgstr "/_Maydonlar ta'rifi" #: standalone/harddrake2:207 #, c-format msgid "Harddrake help" msgstr "Harddrake yordam" #: standalone/harddrake2:216 #, c-format msgid "" "Once you've selected a device, you'll be able to see the device information " "in fields displayed on the right frame (\"Information\")" msgstr "" "Uskunani tanlasangiz, o'ng tarafdagi \"Ma'lumot\" freymida u haqida " "ma'lumotni ko'rishingiz mumkin" #: standalone/harddrake2:222 standalone/printerdrake:164 #, c-format msgid "/_Report Bug" msgstr "/_Xato haqida xabar qilish" #: standalone/harddrake2:224 standalone/printerdrake:166 #, c-format msgid "/_About..." msgstr "/_Haqida" #: standalone/harddrake2:225 #, c-format msgid "About Harddrake" msgstr "Harddrake haqida" #. -PO: Do not alter the and tags #: standalone/harddrake2:227 #, fuzzy, c-format msgid "" "This is HardDrake, a %s hardware configuration tool.\n" "Version: %s\n" "Author: Thierry Vignaud <" "tvignaud@mandriva.com>\n" "\n" msgstr "" "HardDrake - Mandriva Linux uchun asbob-uskunalarni moslovchi vosita.\n" "Versiya: %s\n" "Muallif: Thierry Vignaud <" "tvignaud@mandriva.com>\n" "\n" #: standalone/harddrake2:241 #, c-format msgid "Harddrake2" msgstr "Harddrake2" #: standalone/harddrake2:255 #, c-format msgid "Detected hardware" msgstr "Aniqlangan asbob-uskunalar" #: standalone/harddrake2:260 #, c-format msgid "Configure module" msgstr "Modulni moslash" #: standalone/harddrake2:267 #, c-format msgid "Run config tool" msgstr "Moslash vositasini ishga tushirish" #: standalone/harddrake2:305 standalone/net_monitor:103 #: standalone/net_monitor:104 standalone/net_monitor:109 #, c-format msgid "unknown" msgstr "noma'lum" #: standalone/harddrake2:306 standalone/printerdrake:298 #: standalone/printerdrake:336 #, c-format msgid "Unknown" msgstr "Noma'lum" #: standalone/harddrake2:326 #, c-format msgid "Misc" msgstr "Xar hil" #: standalone/harddrake2:341 #, c-format msgid "" "Click on a device in the left tree in order to display its information here." msgstr "" "Uskuna haqida ma'lumotni bu erda ko'rish uchun uni chap tarafdagi ro'yxatdan " "tanlang." #: standalone/harddrake2:393 #, c-format msgid "secondary" msgstr "Ikkilamchi" #: standalone/harddrake2:393 #, c-format msgid "primary" msgstr "Asosiy" #: standalone/harddrake2:397 #, c-format msgid "burner" msgstr "" #: standalone/harddrake2:397 #, c-format msgid "DVD" msgstr "DVD" #: standalone/harddrake2:543 standalone/harddrake2:546 #, c-format msgid "Upload the hardware list" msgstr "" #: standalone/harddrake2:548 #, fuzzy, c-format msgid "Account:" msgstr "Ulash" #: standalone/harddrake2:549 #, fuzzy, c-format msgid "Password:" msgstr "Maxfiy so'z" #: standalone/harddrake2:550 #, c-format msgid "Hostname:" msgstr "Kompyuterning nomi:" #: standalone/keyboarddrake:30 #, c-format msgid "Please, choose your keyboard layout." msgstr "Iltimos tugmalar tartibini tanlang." #: standalone/keyboarddrake:45 #, c-format msgid "Do you want the BackSpace to return Delete in console?" msgstr "" #: standalone/localedrake:38 #, c-format msgid "LocaleDrake" msgstr "LocaleDrake" #: standalone/localedrake:43 #, c-format msgid "The change is done, but to be effective you must logout" msgstr "" "O'zgarishlar bajarildi, ammo amalda to'liq qo'llanilishi uchun siz " "chiqishingiz kerak." #: standalone/logdrake:49 #, fuzzy, c-format msgid "Mandriva Linux Tools Logs" msgstr "Mandriva Linux boshqaruv markazi" #: standalone/logdrake:50 #, c-format msgid "Logdrake" msgstr "Logdrake" #: standalone/logdrake:63 #, c-format msgid "Show only for the selected day" msgstr "Faqat tanlangan kun uchun ko'rsatish" #: standalone/logdrake:70 #, c-format msgid "/File/_New" msgstr "/Fayl/_Yangi" #: standalone/logdrake:70 #, c-format msgid "N" msgstr "N" #: standalone/logdrake:71 #, c-format msgid "/File/_Open" msgstr "/Fayl/_Ochish" #: standalone/logdrake:71 #, c-format msgid "O" msgstr "O" #: standalone/logdrake:72 #, c-format msgid "/File/_Save" msgstr "/Fayl/_Saqlash" #: standalone/logdrake:72 #, c-format msgid "S" msgstr "S" #: standalone/logdrake:73 #, c-format msgid "/File/Save _As" msgstr "/Fayl/...sifatida s_aqlash" #: standalone/logdrake:74 #, c-format msgid "/File/-" msgstr "/Fayl/-" #: standalone/logdrake:77 #, c-format msgid "/Options/Test" msgstr "/Parametrlar/Sinash" #: standalone/logdrake:79 #, c-format msgid "/Help/_About..." msgstr "/Yordam/_Haqida" #: standalone/logdrake:108 #, c-format msgid "" "_:this is the auth.log log file\n" "Authentication" msgstr "Tasdiqlash" #: standalone/logdrake:109 #, c-format msgid "" "_:this is the user.log log file\n" "User" msgstr "Foydalanuvchi" #: standalone/logdrake:110 #, c-format msgid "" "_:this is the /var/log/messages log file\n" "Messages" msgstr "Xabarlar" #: standalone/logdrake:111 #, c-format msgid "" "_:this is the /var/log/syslog log file\n" "Syslog" msgstr "" #: standalone/logdrake:115 #, c-format msgid "search" msgstr "Qidirish" #: standalone/logdrake:127 #, c-format msgid "A tool to monitor your logs" msgstr "Loglarni nazorat qilish uchun vosita" #: standalone/logdrake:128 standalone/net_applet:276 standalone/net_monitor:94 #, c-format msgid "Settings" msgstr "Moslamalar" #: standalone/logdrake:133 #, c-format msgid "Matching" msgstr "Mos keladigan" #: standalone/logdrake:134 #, c-format msgid "but not matching" msgstr "mos kelmaydigan" #: standalone/logdrake:138 #, c-format msgid "Choose file" msgstr "Faylni tanlash" #: standalone/logdrake:147 #, c-format msgid "Calendar" msgstr "Kalendar" #: standalone/logdrake:157 #, c-format msgid "Content of the file" msgstr "Faylning tarkibi" #: standalone/logdrake:161 standalone/logdrake:399 #, c-format msgid "Mail alert" msgstr "Xat orqali xabar berish" #: standalone/logdrake:168 #, c-format msgid "The alert wizard has failed unexpectedly:" msgstr "" #: standalone/logdrake:221 #, c-format msgid "please wait, parsing file: %s" msgstr "" #: standalone/logdrake:376 #, c-format msgid "Apache World Wide Web Server" msgstr "Apache veb-serveri" #: standalone/logdrake:377 #, c-format msgid "Domain Name Resolver" msgstr "" #: standalone/logdrake:378 #, c-format msgid "Ftp Server" msgstr "FTP serveri" #: standalone/logdrake:379 #, c-format msgid "Postfix Mail Server" msgstr "Postfix xat-xabar serveri" #: standalone/logdrake:380 #, c-format msgid "Samba Server" msgstr "Samba serveri" #: standalone/logdrake:382 #, c-format msgid "Webmin Service" msgstr "Webmin xizmati" #: standalone/logdrake:383 #, c-format msgid "Xinetd Service" msgstr "Xinetd xizmati" #: standalone/logdrake:394 #, c-format msgid "Configure the mail alert system" msgstr "" #: standalone/logdrake:395 #, c-format msgid "Stop the mail alert system" msgstr "" #: standalone/logdrake:402 #, c-format msgid "Mail alert configuration" msgstr "Xat orqali xabar berishni moslash" #: standalone/logdrake:403 #, c-format msgid "" "Welcome to the mail configuration utility.\n" "\n" "Here, you'll be able to set up the alert system.\n" msgstr "" #: standalone/logdrake:406 #, c-format msgid "What do you want to do?" msgstr "Siz nima qilmoqchisiz?" #: standalone/logdrake:413 #, c-format msgid "Services settings" msgstr "Xizmatlarning moslamasi" #: standalone/logdrake:414 #, c-format msgid "" "You will receive an alert if one of the selected services is no longer " "running" msgstr "Agar tanlangan xizmatlarning ishi to'xtasa sizga xabar jo'natiladi" #: standalone/logdrake:421 #, c-format msgid "Load setting" msgstr "Moslamalarni yukash" #: standalone/logdrake:422 #, c-format msgid "You will receive an alert if the load is higher than this value" msgstr "" #: standalone/logdrake:423 #, c-format msgid "" "_: load here is a noun, the load of the system\n" "Load" msgstr "Yuklanganligi" #: standalone/logdrake:428 #, c-format msgid "Alert configuration" msgstr "" #: standalone/logdrake:429 #, c-format msgid "Please enter your email address below " msgstr "Iltimos elektron pochtangizni kiriting" #: standalone/logdrake:430 #, c-format msgid "and enter the name (or the IP) of the SMTP server you wish to use" msgstr "" #: standalone/logdrake:449 #, c-format msgid "The wizard successfully configured the mail alert." msgstr "" #: standalone/logdrake:455 #, c-format msgid "The wizard successfully disabled the mail alert." msgstr "" #: standalone/logdrake:514 #, c-format msgid "Save as.." msgstr "...sifatida saqlash" #: standalone/mousedrake:31 #, c-format msgid "Please choose your mouse type." msgstr "Iltimos sichqonchaning turini tanlang." #: standalone/mousedrake:44 #, c-format msgid "Emulate third button?" msgstr "" #: standalone/mousedrake:61 #, c-format msgid "Mouse test" msgstr "Sichqonchani sinash" #: standalone/mousedrake:64 #, c-format msgid "Please test your mouse:" msgstr "Iltimos sichqonchani sinab ko'ring:" #: standalone/net_applet:51 #, fuzzy, c-format msgid "Network is up on interface %s" msgstr "Tarmoqning interfeysi" #. -PO: keep the "Configure Network" substring synced with the "Configure Network" message below #: standalone/net_applet:54 #, fuzzy, c-format msgid "Network is down on interface %s. Click on \"Configure Network\"" msgstr "Tarmoq moslanmagan" #: standalone/net_applet:60 standalone/net_monitor:469 #, c-format msgid "Connect %s" msgstr "%s-ni ulash" #: standalone/net_applet:61 standalone/net_monitor:469 #, c-format msgid "Disconnect %s" msgstr "" #: standalone/net_applet:62 #, c-format msgid "Monitor Network" msgstr "Tarmoqni nazorat qilish" #: standalone/net_applet:63 #, c-format msgid "Manage wireless networks" msgstr "" #: standalone/net_applet:64 #, c-format msgid "Configure Network" msgstr "Tarmoqni moslash" #: standalone/net_applet:66 #, fuzzy, c-format msgid "Watched interface" msgstr "Interfeyslar" #: standalone/net_applet:75 #, fuzzy, c-format msgid "Profiles" msgstr "Proksilar" #: standalone/net_applet:84 #, c-format msgid "Get Online Help" msgstr "" #: standalone/net_applet:262 #, fuzzy, c-format msgid "Interactive intrusion detection" msgstr "Printerni avto-aniqlash" #: standalone/net_applet:267 #, c-format msgid "Always launch on startup" msgstr "" #: standalone/net_applet:271 #, c-format msgid "Actions" msgstr "" #: standalone/net_applet:330 #, c-format msgid "A port scanning attack has been attempted by %s." msgstr "" #: standalone/net_applet:331 #, c-format msgid "The %s service has been attacked by %s." msgstr "" #: standalone/net_applet:332 #, c-format msgid "A password cracking attack has been attempted by %s." msgstr "" #: standalone/net_applet:340 #, c-format msgid "Active Firewall: intrusion detected" msgstr "" #: standalone/net_applet:351 #, fuzzy, c-format msgid "Do you want to blacklist the attacker?" msgstr "Bu qulaylikdan foydalanishni istaysizmi?" #: standalone/net_applet:365 #, c-format msgid "Always blacklist (do not ask again)" msgstr "" #: standalone/net_applet:368 #, fuzzy, c-format msgid "Attack details" msgstr "Tafsilotlarsiz" #: standalone/net_applet:372 #, c-format msgid "Attack time: %s" msgstr "" #: standalone/net_applet:373 #, fuzzy, c-format msgid "Network interface: %s" msgstr "Tarmoq interfeyslari" #: standalone/net_applet:374 #, fuzzy, c-format msgid "Attack type: %s" msgstr "turi: %s" #: standalone/net_applet:375 #, fuzzy, c-format msgid "Protocol: %s" msgstr "Protokollar" #: standalone/net_applet:376 #, fuzzy, c-format msgid "Attacker IP address: %s" msgstr "Kompyuterning IP raqami:" #: standalone/net_applet:377 #, fuzzy, c-format msgid "Attacker hostname: %s" msgstr "Kompyuterning nomi %s o'rnatilmoqda: " #: standalone/net_applet:378 #, fuzzy, c-format msgid "Service attacked: %s" msgstr "Xizmat boshqaruvchisi" #: standalone/net_applet:379 #, fuzzy, c-format msgid "Port attacked: %s" msgstr "Port: %s" #: standalone/net_applet:380 #, c-format msgid "Type of ICMP attack: %s" msgstr "" #: standalone/net_monitor:58 standalone/net_monitor:63 #, c-format msgid "Network Monitoring" msgstr "Tarmoqni nazorat qilish" #: standalone/net_monitor:99 #, c-format msgid "Global statistics" msgstr "Umumiy statistika" #: standalone/net_monitor:102 #, c-format msgid "Instantaneous" msgstr "" #: standalone/net_monitor:102 #, c-format msgid "Average" msgstr "O'rtacha" #: standalone/net_monitor:103 #, c-format msgid "" "Sending\n" "speed:" msgstr "" "Jo'natish\n" "tezligi:" #: standalone/net_monitor:104 #, c-format msgid "" "Receiving\n" "speed:" msgstr "" "Qabul qilish\n" "tezligi:" #: standalone/net_monitor:108 #, c-format msgid "" "Connection\n" "time: " msgstr "" "Ulanish\n" "vaqti: " #: standalone/net_monitor:115 #, c-format msgid "Use same scale for received and transmitted" msgstr "" #: standalone/net_monitor:134 #, c-format msgid "Wait please, testing your connection..." msgstr "Iltimos kutib turing, aloqa sinab ko'rilmoqda..." #: standalone/net_monitor:183 standalone/net_monitor:196 #, c-format msgid "Disconnecting from Internet " msgstr "Internet bilan aloqa uzilmoqda" #: standalone/net_monitor:183 standalone/net_monitor:196 #, c-format msgid "Connecting to Internet " msgstr "Internetga ulanilmoqda " #: standalone/net_monitor:227 #, c-format msgid "Disconnection from Internet failed." msgstr "Internetdan uzilish muvaffaqiyatsiz tugadi." #: standalone/net_monitor:228 #, c-format msgid "Disconnection from Internet complete." msgstr "Internetdan uzilish bajarildi." #: standalone/net_monitor:230 #, c-format msgid "Connection complete." msgstr "Aloqa o'rnatildi." #: standalone/net_monitor:231 #, c-format msgid "" "Connection failed.\n" "Verify your configuration in the Mandriva Linux Control Center." msgstr "" "Aloqa o'rnatish muvaffaqiyatsiz tugadi.\n" "Moslamani Mandriva Linux boshqaruv markazida tekshiring." #: standalone/net_monitor:336 #, c-format msgid "Color configuration" msgstr "Rangni moslash" #: standalone/net_monitor:384 standalone/net_monitor:404 #, c-format msgid "sent: " msgstr "jo'natilgan: " #: standalone/net_monitor:391 standalone/net_monitor:408 #, c-format msgid "received: " msgstr "qabul qilingan: " #: standalone/net_monitor:398 #, c-format msgid "average" msgstr "o'rtachasi" #: standalone/net_monitor:401 #, c-format msgid "Local measure" msgstr "Lokal ko'rsatgich" #: standalone/net_monitor:462 #, c-format msgid "" "Warning, another internet connection has been detected, maybe using your " "network" msgstr "" #: standalone/net_monitor:473 #, c-format msgid "No internet connection configured" msgstr "Internetga ulanish moslanmagan" #: standalone/printerdrake:68 #, c-format msgid "Reading data of installed printers..." msgstr "O'rnatilgan printerlar haqida ma'lumot o'qilmoqda..." #: standalone/printerdrake:116 #, c-format msgid "%s Printer Management Tool" msgstr "%s printerni boshqarish uchun vosita" #: standalone/printerdrake:130 standalone/printerdrake:131 #: standalone/printerdrake:132 standalone/printerdrake:133 #: standalone/printerdrake:141 standalone/printerdrake:142 #: standalone/printerdrake:146 #, c-format msgid "/_Actions" msgstr "/_Amallar" #: standalone/printerdrake:130 standalone/printerdrake:142 #, c-format msgid "/_Add Printer" msgstr "/_Printerni qo'shish" #: standalone/printerdrake:131 #, c-format msgid "/Set as _Default" msgstr "/_Andoza deb belgilash" #: standalone/printerdrake:132 #, c-format msgid "/_Edit" msgstr "/_Tuzatish" #: standalone/printerdrake:133 #, c-format msgid "/_Delete" msgstr "/_O'chirish" #: standalone/printerdrake:134 #, c-format msgid "/_Expert mode" msgstr "/_Ekspert usuli" #: standalone/printerdrake:139 #, c-format msgid "/_Refresh" msgstr "/_Yangilash" #: standalone/printerdrake:146 #, c-format msgid "/_Configure CUPS" msgstr "/CUPS'ni _moslash" #: standalone/printerdrake:181 #, c-format msgid "Search:" msgstr "Qidirish:" #: standalone/printerdrake:184 #, c-format msgid "Apply filter" msgstr "Filterni qo'llash" #: standalone/printerdrake:211 standalone/printerdrake:218 #, c-format msgid "Def." msgstr "" #: standalone/printerdrake:211 standalone/printerdrake:218 #, c-format msgid "Printer Name" msgstr "Printerning nomi" #: standalone/printerdrake:211 #, c-format msgid "Connection Type" msgstr "Ulanishning turi" #: standalone/printerdrake:218 #, c-format msgid "Server Name" msgstr "Serverning nomi" #. -PO: "Add Printer" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/printerdrake:226 #, c-format msgid "Add Printer" msgstr "Printerni qo'shish" #: standalone/printerdrake:226 #, c-format msgid "Add a new printer to the system" msgstr "Tizimga yangi printerni qo'shish" #. -PO: "Set as default" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/printerdrake:229 #, c-format msgid "Set as default" msgstr "Andoza deb belgilash" #: standalone/printerdrake:229 #, c-format msgid "Set selected printer as the default printer" msgstr "Belgilangan printerni andoza deb belgilash" #: standalone/printerdrake:232 #, c-format msgid "Edit selected printer" msgstr "Belgilangan printerni tuzatish" #: standalone/printerdrake:235 #, c-format msgid "Delete selected printer" msgstr "Belgilangan printerni o'chirish" #: standalone/printerdrake:238 #, c-format msgid "Refresh the list" msgstr "Ro'yxatni yangilash" #. -PO: "Configure CUPS" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/printerdrake:241 #, c-format msgid "Configure CUPS" msgstr "CUPS'ni moslash" #: standalone/printerdrake:241 #, c-format msgid "Configure CUPS printing system" msgstr "CUPS bosib chiqarish tizimini moslash" #: standalone/printerdrake:299 standalone/printerdrake:337 #, c-format msgid "Enabled" msgstr "Yoqilgan" #: standalone/printerdrake:300 standalone/printerdrake:338 #, c-format msgid "Disabled" msgstr "O'chirilgan" #: standalone/printerdrake:560 #, c-format msgid "Authors: " msgstr "Mualliflar: " #. -PO: here %s is the version number #: standalone/printerdrake:570 #, fuzzy, c-format msgid "Printer Management %s" msgstr "Printer boshqaruvi\n" #: standalone/scannerdrake:51 #, c-format msgid "" "SANE packages need to be installed to use scanners.\n" "\n" "Do you want to install the SANE packages?" msgstr "" "Skannerdan foydalanish uchun SANE paketlari o'rnatilishi kerak.\n" "\n" "Ularni o'rnatishni istaysizmi?" #: standalone/scannerdrake:55 #, c-format msgid "Aborting Scannerdrake." msgstr "Scannerdrake to'xtatilmoqda." #: standalone/scannerdrake:60 #, c-format msgid "" "Could not install the packages needed to set up a scanner with Scannerdrake." msgstr "" #: standalone/scannerdrake:61 #, c-format msgid "Scannerdrake will not be started now." msgstr "" #: standalone/scannerdrake:67 standalone/scannerdrake:491 #, c-format msgid "Searching for configured scanners..." msgstr "Moslangan skannerlar qidirilmoqda..." #: standalone/scannerdrake:71 standalone/scannerdrake:495 #, c-format msgid "Searching for new scanners..." msgstr "Yangi skannerlar qidirilmoqda..." #: standalone/scannerdrake:79 standalone/scannerdrake:517 #, c-format msgid "Re-generating list of configured scanners..." msgstr "Moslangan skannerlarning ro'yxati boshqadan yaratilmoqda..." #: standalone/scannerdrake:101 #, c-format msgid "The %s is not supported by this version of %s." msgstr "" #: standalone/scannerdrake:104 #, c-format msgid "%s found on %s, configure it automatically?" msgstr "%s %s'da topildi, uni avtomatik ravishda moslaymi?" #: standalone/scannerdrake:116 #, c-format msgid "%s is not in the scanner database, configure it manually?" msgstr "" #: standalone/scannerdrake:131 #, c-format msgid "Select a scanner model" msgstr "Skannerning modelini tanlang" #: standalone/scannerdrake:132 #, c-format msgid " (" msgstr " (" #: standalone/scannerdrake:133 #, c-format msgid "Detected model: %s" msgstr "Aniqlangan model: %s" #: standalone/scannerdrake:136 #, c-format msgid "Port: %s" msgstr "Port: %s" #: standalone/scannerdrake:138 standalone/scannerdrake:141 #, c-format msgid " (UNSUPPORTED)" msgstr "" #: standalone/scannerdrake:144 #, fuzzy, c-format msgid "The %s is not supported under Linux." msgstr "%s qo'llanmagan" #: standalone/scannerdrake:171 standalone/scannerdrake:185 #, c-format msgid "Do not install firmware file" msgstr "" #: standalone/scannerdrake:175 standalone/scannerdrake:227 #, c-format msgid "" "It is possible that your %s needs its firmware to be uploaded everytime when " "it is turned on." msgstr "" #: standalone/scannerdrake:176 standalone/scannerdrake:228 #, c-format msgid "If this is the case, you can make this be done automatically." msgstr "" #: standalone/scannerdrake:177 standalone/scannerdrake:231 #, c-format msgid "" "To do so, you need to supply the firmware file for your scanner so that it " "can be installed." msgstr "" #: standalone/scannerdrake:178 standalone/scannerdrake:232 #, c-format msgid "" "You find the file on the CD or floppy coming with the scanner, on the " "manufacturer's home page, or on your Windows partition." msgstr "" #: standalone/scannerdrake:180 standalone/scannerdrake:239 #, c-format msgid "Install firmware file from" msgstr "" #: standalone/scannerdrake:200 #, c-format msgid "Select firmware file" msgstr "" #: standalone/scannerdrake:203 standalone/scannerdrake:262 #, c-format msgid "The firmware file %s does not exist or is unreadable!" msgstr "" #: standalone/scannerdrake:226 #, c-format msgid "" "It is possible that your scanners need their firmware to be uploaded " "everytime when they are turned on." msgstr "" #: standalone/scannerdrake:230 #, c-format msgid "" "To do so, you need to supply the firmware files for your scanners so that it " "can be installed." msgstr "" #: standalone/scannerdrake:233 #, c-format msgid "" "If you have already installed your scanner's firmware you can update the " "firmware here by supplying the new firmware file." msgstr "" #: standalone/scannerdrake:235 #, c-format msgid "Install firmware for the" msgstr "" #: standalone/scannerdrake:258 #, c-format msgid "Select firmware file for the %s" msgstr "" #: standalone/scannerdrake:276 #, c-format msgid "Could not install the firmware file for the %s!" msgstr "" #: standalone/scannerdrake:289 #, c-format msgid "The firmware file for your %s was successfully installed." msgstr "" #: standalone/scannerdrake:299 #, c-format msgid "The %s is unsupported" msgstr "%s qo'llanmagan" #: standalone/scannerdrake:304 #, c-format msgid "" "The %s must be configured by printerdrake.\n" "You can launch printerdrake from the %s Control Center in Hardware section." msgstr "" "%s Printerdrake yordamida moslanishi kerak.\n" "Printerdrake dasturini Mandriva boshqaruv markazining \"Asbob-uskunalar\" " "bo'limidagi \"%s\" bandidan ishga tushirishingiz mumkin." #: standalone/scannerdrake:308 standalone/scannerdrake:315 #: standalone/scannerdrake:345 #, c-format msgid "Auto-detect available ports" msgstr "Mavjud portlarni avtomatik ravishda topish" #: standalone/scannerdrake:310 standalone/scannerdrake:356 #, c-format msgid "Please select the device where your %s is attached" msgstr "Iltimos %s ulangan uskunani tanlang" #: standalone/scannerdrake:311 #, c-format msgid "(Note: Parallel ports cannot be auto-detected)" msgstr "(Izoh: Parallel portlarni avto-aniqlab bo'lmaydi)" #: standalone/scannerdrake:313 standalone/scannerdrake:358 #, c-format msgid "choose device" msgstr "uskunani tanlang" #: standalone/scannerdrake:347 #, c-format msgid "Searching for scanners..." msgstr "Skannerlar qidirilmoqda..." #: standalone/scannerdrake:383 #, fuzzy, c-format msgid "Setting up kernel modules..." msgstr "USB printerining kernel modullari yuklanmoqda\n" #: standalone/scannerdrake:390 standalone/scannerdrake:397 #, fuzzy, c-format msgid "Attention!" msgstr "Tortishish" #: standalone/scannerdrake:391 #, c-format msgid "" "Your %s cannot be configured fully automatically.\n" "\n" "Manual adjustments are required. Please edit the configuration file /etc/" "sane.d/%s.conf. " msgstr "" #: standalone/scannerdrake:392 standalone/scannerdrake:401 #, c-format msgid "" "More info in the driver's manual page. Run the command \"man sane-%s\" to " "read it." msgstr "" #: standalone/scannerdrake:394 standalone/scannerdrake:403 #, fuzzy, c-format msgid "" "After that you may scan documents using \"XSane\" or \"Kooka\" from " "Multimedia/Graphics in the applications menu." msgstr "" "%s moslandi.\n" "Hujjatlarni dasturlar menyusidagi Multimedia/Grafikada joylashgan \"XSane\" " "yoki \"Kooka\" yordamida skan qilish mumkin" #: standalone/scannerdrake:398 #, c-format msgid "" "Your %s has been configured, but it is possible that additional manual " "adjustments are needed to get it to work. " msgstr "" #: standalone/scannerdrake:399 #, c-format msgid "" "If it does not appear in the list of configured scanners in the main window " "of Scannerdrake or if it does not work correctly, " msgstr "" #: standalone/scannerdrake:400 #, c-format msgid "edit the configuration file /etc/sane.d/%s.conf. " msgstr "" #: standalone/scannerdrake:406 #, c-format msgid "" "Your %s has been configured.\n" "You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/" "Graphics in the applications menu." msgstr "" "%s moslandi.\n" "Hujjatlarni dasturlar menyusidagi Multimedia/Grafikada joylashgan \"XSane\" " "yoki \"Kooka\" yordamida skan qilish mumkin" #: standalone/scannerdrake:431 #, c-format msgid "" "The following scanners\n" "\n" "%s\n" "are available on your system.\n" msgstr "" "Quyidagi skannerlar\n" "\n" "%s\n" "kompyuterda mavjud.\n" #: standalone/scannerdrake:432 #, c-format msgid "" "The following scanner\n" "\n" "%s\n" "is available on your system.\n" msgstr "" "Quyidagi skanner\n" "\n" "%s\n" "kompyuterda mavjud.\n" #: standalone/scannerdrake:435 standalone/scannerdrake:438 #, c-format msgid "There are no scanners found which are available on your system.\n" msgstr "Tizimda mavjud bo'lgan skanner topilmadi.\n" #: standalone/scannerdrake:452 #, c-format msgid "Search for new scanners" msgstr "Yangi skannerlarni qidirish" #: standalone/scannerdrake:458 #, c-format msgid "Add a scanner manually" msgstr "" #: standalone/scannerdrake:465 #, c-format msgid "Install/Update firmware files" msgstr "" #: standalone/scannerdrake:471 #, c-format msgid "Scanner sharing" msgstr "" #: standalone/scannerdrake:530 standalone/scannerdrake:695 #, c-format msgid "All remote machines" msgstr "Masofadagi hamma kompyuterlar" #: standalone/scannerdrake:542 standalone/scannerdrake:845 #, c-format msgid "This machine" msgstr "Shu kompyuter" #: standalone/scannerdrake:582 #, c-format msgid "" "Here you can choose whether the scanners connected to this machine should be " "accessible by remote machines and by which remote machines." msgstr "" "Bu erda, bu kompyuterga ulangan skannerdan boshqa kompyuter va qaysi " "kompyuter foydalansa bo'ladimi-yo'qmi tanlashingiz mumkin." #: standalone/scannerdrake:583 #, c-format msgid "" "You can also decide here whether scanners on remote machines should be made " "available on this machine." msgstr "" #: standalone/scannerdrake:586 #, c-format msgid "The scanners on this machine are available to other computers" msgstr "" "Bu kompyuterdagi skannerlarni boshqa kompyuterlardan ham ishlatsa bo'ladi" #: standalone/scannerdrake:588 #, c-format msgid "Scanner sharing to hosts: " msgstr "" #: standalone/scannerdrake:602 #, c-format msgid "Use scanners on remote computers" msgstr "Masofadagi kompyuterlardagi skannerlardan foydalanish" #: standalone/scannerdrake:605 #, c-format msgid "Use the scanners on hosts: " msgstr "Quyidagi kompyuterlardagi skannerlardan foydalanish:" #: standalone/scannerdrake:632 standalone/scannerdrake:704 #: standalone/scannerdrake:854 #, c-format msgid "Sharing of local scanners" msgstr "" #: standalone/scannerdrake:633 #, c-format msgid "" "These are the machines on which the locally connected scanner(s) should be " "available:" msgstr "" #: standalone/scannerdrake:644 standalone/scannerdrake:794 #, c-format msgid "Add host" msgstr "Kompyuterni qo'shish" #: standalone/scannerdrake:650 standalone/scannerdrake:800 #, c-format msgid "Edit selected host" msgstr "Tanlangan kompyuterni tuzatish" #: standalone/scannerdrake:659 standalone/scannerdrake:809 #, c-format msgid "Remove selected host" msgstr "Tanlangan kompyuterni olib tashlash" #: standalone/scannerdrake:683 standalone/scannerdrake:691 #: standalone/scannerdrake:696 standalone/scannerdrake:742 #: standalone/scannerdrake:833 standalone/scannerdrake:841 #: standalone/scannerdrake:846 standalone/scannerdrake:892 #, c-format msgid "Name/IP address of host:" msgstr "Kompyuterning nomi/IP raqami:" #: standalone/scannerdrake:705 standalone/scannerdrake:855 #, c-format msgid "Choose the host on which the local scanners should be made available:" msgstr "" #: standalone/scannerdrake:716 standalone/scannerdrake:866 #, c-format msgid "You must enter a host name or an IP address.\n" msgstr "Kompyuterning nomini yoki IP raqamini kiritishingiz kerak.\n" #: standalone/scannerdrake:727 standalone/scannerdrake:877 #, c-format msgid "This host is already in the list, it cannot be added again.\n" msgstr "" "Bu kompyuterning nomi ro'yxatda allaqachon bor, uni yana qo'shib bo'lmaydi.\n" #: standalone/scannerdrake:782 #, c-format msgid "Usage of remote scanners" msgstr "Masofadagi skannerlardan foydalanish" #: standalone/scannerdrake:783 #, c-format msgid "These are the machines from which the scanners should be used:" msgstr "Skannerlardan foydalanib bo'ladigan kompyuterlar:" #: standalone/scannerdrake:940 #, c-format msgid "" "saned needs to be installed to share the local scanner(s).\n" "\n" "Do you want to install the saned package?" msgstr "" "Lokal skanner(lar) bilan bo'lishish uchun saned paketi o'rnatilishi kerak.\n" "\n" "Uni o'rnatishni istaysizmi?" #: standalone/scannerdrake:944 standalone/scannerdrake:948 #, c-format msgid "Your scanner(s) will not be available on the network." msgstr "Skanner(lar)ni tarmoq orqali ishlatib bo'lmaydi." #: standalone/service_harddrake:104 #, c-format msgid "Some devices in the \"%s\" hardware class were removed:\n" msgstr "\"%s\" asbob-uskuna sinfidagi ba'zi bir uskunalar olib tashlandi:\n" #: standalone/service_harddrake:105 #, c-format msgid "- %s was removed\n" msgstr "" #: standalone/service_harddrake:108 #, c-format msgid "Some devices were added: %s\n" msgstr "Ba'zi bir uskunalar qo'shildi: %s\n" #: standalone/service_harddrake:109 #, c-format msgid "- %s was added\n" msgstr "" #: standalone/service_harddrake:206 #, c-format msgid "Hardware probing in progress" msgstr "Asbob-uskunalarni aniqlash ketayapti" #: standalone/service_harddrake_confirm:7 #, c-format msgid "Hardware changes in \"%s\" class (%s seconds to answer)" msgstr "" #: standalone/service_harddrake_confirm:8 #, c-format msgid "Do you want to run the appropriate config tool?" msgstr "Moslash vositasini ishga tushirishni istaysizmi?" #: steps.pm:14 #, c-format msgid "Language" msgstr "Til" #: steps.pm:15 #, c-format msgid "License" msgstr "Litsenziya" #: steps.pm:16 #, c-format msgid "Configure mouse" msgstr "Sichqonchani moslash" #: steps.pm:17 #, c-format msgid "Hard drive detection" msgstr "Qattiq diskni aniqlash" #: steps.pm:18 #, c-format msgid "Select installation class" msgstr "O'rnatish sinfini tanlang" #: steps.pm:19 #, c-format msgid "Choose your keyboard" msgstr "Tugmatagni tanlang" #: steps.pm:21 #, c-format msgid "Partitioning" msgstr "Diskni bo'lish" #: steps.pm:22 #, c-format msgid "Format partitions" msgstr "Diskning qismlarini format qilish" #: steps.pm:23 #, c-format msgid "Choose packages to install" msgstr "O'rnatilishi kerak bo'lgan paketlarni tanlang" #: steps.pm:24 #, c-format msgid "Install system" msgstr "Tizimni o'rnatish" #: steps.pm:25 #, fuzzy, c-format msgid "Administrator password" msgstr "Root uchun maxfiy so'z" #: steps.pm:26 #, c-format msgid "Add a user" msgstr "Foydalanuvchini qo'shish" #: steps.pm:27 #, c-format msgid "Configure networking" msgstr "Tarmoqni moslash" #: steps.pm:28 #, c-format msgid "Install bootloader" msgstr "OT yuklagichini o'rnatish" #: steps.pm:29 #, c-format msgid "Configure X" msgstr "X serverini moslash" #: steps.pm:31 #, c-format msgid "Configure services" msgstr "Xizmatlarni moslash" #: steps.pm:32 #, c-format msgid "Install updates" msgstr "Yangilanishlarni o'rnatish" #: steps.pm:33 #, c-format msgid "Exit install" msgstr "O'rnatishdan chiqish" #: ugtk2.pm:908 #, c-format msgid "Is this correct?" msgstr "Bu to'g'rimi?" #: ugtk2.pm:968 #, fuzzy, c-format msgid "No file chosen" msgstr "Nishoncha yo'q" #: ugtk2.pm:970 #, c-format msgid "You have chosen a file, not a directory" msgstr "" #: ugtk2.pm:972 #, fuzzy, c-format msgid "You have chosen a directory, not a file" msgstr "Uy direktoriya mavjud emas." #: ugtk2.pm:974 #, fuzzy, c-format msgid "No such directory" msgstr "Lokal direktoriya" #: ugtk2.pm:974 #, fuzzy, c-format msgid "No such file" msgstr "Lokal fayl" #: ugtk2.pm:1055 #, c-format msgid "Expand Tree" msgstr "Ro'yxatni yoyish" #: ugtk2.pm:1056 #, c-format msgid "Collapse Tree" msgstr "Ro'yxatni yig'ish" #: ugtk2.pm:1057 #, c-format msgid "Toggle between flat and group sorted" msgstr "" #: wizards.pm:95 #, c-format msgid "" "%s is not installed\n" "Click \"Next\" to install or \"Cancel\" to quit" msgstr "" "%s o'rnatilmagan\n" "O'rnatish uchun \"Keyingi\" yoki chiqish uchun \"Bekor qilish\" tugmasini " "bosing" #: wizards.pm:99 #, c-format msgid "Installation failed" msgstr "O'rnatish muvaffaqiyatsiz tugadi" #~ msgid "Grub" #~ msgstr "Grub" #~ msgid "Local Network adress" #~ msgstr "Lokal tarmoqning manzili" #~ msgid "Configuring scripts, installing software, starting servers..." #~ msgstr "" #~ "Skriptlar moslanmoqda, dasturlar o'rnatilmoqda, serverlar ishga " #~ "tushirilmoqda..." #~ msgid "drakfloppy" #~ msgstr "drakfloppy" #~ msgid "Boot disk creation" #~ msgstr "Tizimni yuklash diskini yaratish" #~ msgid "General" #~ msgstr "Umumiy" #~ msgid "Kernel version" #~ msgstr "Kernelning versiyasi" #~ msgid "Preferences" #~ msgstr "Moslash" #~ msgid "Advanced preferences" #~ msgstr "Qo'shimcha moslamalar" #~ msgid "Size" #~ msgstr "Hajmi" #~ msgid "Mkinitrd optional arguments" #~ msgstr "Mkinitrd uchun boshqa argumentlar" #~ msgid "force" #~ msgstr "majburiy" #~ msgid "omit raid modules" #~ msgstr "RAID modullarsiz" #~ msgid "if needed" #~ msgstr "agar kerak bo'lsa" #~ msgid "omit scsi modules" #~ msgstr "SCSI modullarsiz" #~ msgid "Add a module" #~ msgstr "Modulni qo'shish" #~ msgid "Remove a module" #~ msgstr "Modulni olib tashlash" #~ msgid "Be sure a media is present for the device %s" #~ msgstr "%s uskunasida ma'lumot tashuvchi borligiga ishonch hosil qiling" #~ msgid "Floppy creation completed" #~ msgstr "Disketni yaratish bajarildi" #~ msgid "The creation of the boot floppy has been successfully completed \n" #~ msgstr "Tizimni yukash disketi muvaffaqiyatli bajarildi.\n" #~ msgid "use PPPoE" #~ msgstr "PPPoE'dan foydalanish" #~ msgid "use PPTP" #~ msgstr "PPTP'dan foydalanish" #~ msgid "use DHCP" #~ msgstr "dhcp'dan foydalanish" #~ msgid "Alcatel Speedtouch USB" #~ msgstr "Alcatel Speedtouch USB" #~ msgid " - detected" #~ msgstr " - topildi" #~ msgid "Sagem (using PPPoA) USB" #~ msgstr "Sagem (PPPoA'ni ishlatib) USB" #~ msgid "Sagem (using DHCP) USB" #~ msgstr "Sagem (DHCP'ni ishlatib) USB" #~ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" #~ msgstr "Icewm, Window Maker, Enlightenment, Fvwm, va hokazo" #~ msgid "PXE Server Configuration" #~ msgstr "PXE serverini moslash" #~ msgid "Installation Server Configuration" #~ msgstr "O'rantish serverini moslash" #~ msgid "No network adapter on your system!" #~ msgstr "Tizimda tarmoq adapteri mavjud emas!" #~ msgid "Choose the network interface" #~ msgstr "Tarmoq interfeysini tanlash" #~ msgid "" #~ "Please choose which network interface will be used for the dhcp server." #~ msgstr "" #~ "Iltimos qaysi tarmoq interfeysi DHCP serveri uchun ishlatilishini tanlang." #~ msgid "Interface %s (on network %s)" #~ msgstr "Interfeys %s (%s tarmog'ida)" #~ msgid "The DHCP start ip" #~ msgstr "DHCP'ning boshlang'ich IP'si" #~ msgid "The DHCP end ip" #~ msgstr "DHCP'ning oxirgi IP'si" #~ msgid "No image found" #~ msgstr "Rasm topilmadi" #~ msgid "" #~ "Please indicate where the auto_install.cfg file is located.\n" #~ "\n" #~ "Leave it blank if you do not want to set up automatic installation mode.\n" #~ "\n" #~ msgstr "" #~ "Iltimos auto_install.cfg fayli joylashgan joyni ko'rsating.\n" #~ "\n" #~ "Agar avtomatik ravishda o'rnatish usulini moslashni istamasangiz, buni " #~ "bo'sh qoldiring.\n" #~ "\n" #~ msgid "Location of auto_install.cfg file" #~ msgstr "auto_install.cfg fayli joylashgan joy" #~ msgid "Do it later" #~ msgstr "Keyinroq bajarish" #~ msgid "Enabling servers..." #~ msgstr "Serverlar yoqilmoqda..." #~ msgid "Interface %s (using module %s)" #~ msgstr "Interfeys %s (%s moduli ishlatilmoqda)" #~ msgid "Interface %s" #~ msgstr "Interfeys %s" #~ msgid "Network interface" #~ msgstr "Tarmoqning interfeysi" #~ msgid "Network interface already configured" #~ msgstr "Tarmoq interfeysi allaqachon moslangan" #~ msgid "No (experts only)" #~ msgstr "Yo'q (faqat ekspertlar uchun)" #~ msgid "Show current interface configuration" #~ msgstr "Joriy interfeysning moslamasini ko'rsatish" #~ msgid "Current interface configuration" #~ msgstr "Joriy interfeysni moslash" #~ msgid "(This) DHCP Server IP" #~ msgstr "(Bu) DHCP serverning IP raqami" #~ msgid "Re-configure interface and DHCP server" #~ msgstr "Interfeysni va DHCP serverini boshqadan moslash" #~ msgid "" #~ "WARNING: this device has been previously configured to connect to the " #~ "Internet.\n" #~ "Modifying the fields below will override this configuration.\n" #~ "Do you really want to reconfigure this device?" #~ msgstr "" #~ "DIQQAT: Bu uskuna Internetga ulanish uchun allaqachon moslangan.\n" #~ "Uni boshqadan moslashni istaysizmi?" #~ msgid "hd" #~ msgstr "qattiq disk" #~ msgid "tape" #~ msgstr "magnit tasma" #~ msgid "" #~ "Maximum size\n" #~ " allowed for Drakbackup (MB)" #~ msgstr "" #~ "Drakbackup uchun ajratilgan\n" #~ " yuqori chegarani kiriting (Mb)" #~ msgid "\t-Network by webdav.\n" #~ msgstr "\t-Tarmoq webdav orqali.\n" #~ msgid "first step creation" #~ msgstr "yaratishning birinchi bosqichi" #~ msgid "choose image file" #~ msgstr "rasm faylini tanlash" #~ msgid "Browse" #~ msgstr "Tanlash" #~ msgid "Configure bootsplash picture" #~ msgstr "Bootsplash rasmini moslash" #~ msgid "the color of the progress bar" #~ msgstr "bajarish ko'rsatgichining rangi" #~ msgid "Preview" #~ msgstr "Ko'rib chiqish" #~ msgid "Choose color" #~ msgstr "Rangni tanlash" #~ msgid "Notice" #~ msgstr "Bildirishnoma" #~ msgid "This theme does not yet have a bootsplash in %s!" #~ msgstr "Bu mavzu uchun %s'da hali bootsplash yo'q!" #~ msgid "You must choose an image file first!" #~ msgstr "Avvalo rasm faylini tanlashingiz shart!" #~ msgid "Generating preview..." #~ msgstr "Ko'rib chiqish uchun ma'lumot yaratilmoqda..." #~ msgid "%s BootSplash (%s) preview" #~ msgstr "%s BootSplash'ni (%s) ko'rib chiqish" #~ msgid "No floppy drive available" #~ msgstr "Hech qanday disket uskunasi mavjud emas" #, fuzzy #~ msgid "" #~ "_: keyboard\n" #~ "Tifinagh (+latin/arabic)" #~ msgstr "Yugoslavcha (lotin)" #~ msgid "No network card" #~ msgstr "Tarmoq kartasi yo'q" #, fuzzy #~ msgid "Use already installed driver (%s)" #~ msgstr "(%s allaqachon qo'shilgan)" #~ msgid "You've not selected any font" #~ msgstr "Siz hech qanday shriftni tanlamadingiz" #~ msgid "No browser available! Please install one" #~ msgstr "Hech qanday brauzer mavjud emas! Iltimos birortasini o'rnating" #~ msgid "" #~ "No browser is installed on your system, Please install one if you want to " #~ "browse the help system" #~ msgstr "" #~ "Tizimda hech qanday brauzer o'rnatilmagan. Agar yordam tizimini " #~ "ko'rmoqchi bo'lsangiz, iltimos birortasini o'rnating" #~ msgid "" #~ "Insert a floppy in drive\n" #~ "All data on this floppy will be lost" #~ msgstr "" #~ "Disketni uskunaga qo'ying.\n" #~ "Undagi hamma ma'lumot yo'qoladi." #~ msgid "Insert a FAT formatted floppy in drive %s" #~ msgstr "Iltimos %s uskunasiga formati FAT bo'lgan disketni qo'ying" #~ msgid "This floppy is not FAT formatted" #~ msgstr "Bu disketning formati FAT emas" #~ msgid "Load/Save on floppy" #~ msgstr "Disketdan/ga yuklash/saqlash" #~ msgid "Load from floppy" #~ msgstr "Disketdan yuklash" #~ msgid "Save on floppy" #~ msgstr "Disketga saqlash" #~ msgid "Package selection" #~ msgstr "Paketlarni tanlash" #~ msgid "Loading from floppy" #~ msgstr "Disketdan yuklanmoqda" #~ msgid "Insert a floppy containing package selection" #~ msgstr "Paketlar tanlovi mavjud bo'lgan disketni qo'ying" #~ msgid "" #~ "_: keyboard\n" #~ "Bengali" #~ msgstr "Bengalcha" #~ msgid "Application:" #~ msgstr "Dastur:" #~ msgid "Summary: " #~ msgstr "Hisobot: " #~ msgid "NOT FOUND" #~ msgstr "TOPILMADI" #~ msgid "connecting to %s..." #~ msgstr "%s bilan aloqa o'rnatilmoqda..." #~ msgid "Please enter a package name." #~ msgstr "Iltimos paketning nomini kiriting." #~ msgid "Please enter summary text." #~ msgstr "Iltimos hisobotni kiriting." #~ msgid "Loading printer configuration... Please wait" #~ msgstr "Printerning moslamalari yuklanmoqda, iltimos kutib turing..." #, fuzzy #~ msgid "The " #~ msgstr "Mavzu" #~ msgid "%s (was %s)" #~ msgstr "%s (avval %s)" #~ msgid "Root password" #~ msgstr "Root maxfiy so'zi" #~ msgid "Samba server" #~ msgstr "Samba serveri" #~ msgid "Move" #~ msgstr "Ko'chirish" #~ msgid "Which disk do you want to move it to?" #~ msgstr "Buni qaysi diskga ko'chirmoqchisiz?" #~ msgid "Sector" #~ msgstr "Sektor" #~ msgid "Which sector do you want to move it to?" #~ msgstr "Buni qaysi sektorga ko'chirmoqchisiz?" #~ msgid "Moving" #~ msgstr "Ko'chirilmoqda" #~ msgid "Moving partition..." #~ msgstr "Diskning qismi ko'chirilmoqda..." #~ msgid "Error opening %s for writing: %s" #~ msgstr "Yozish uchun %s'ni ochishda xato: %s"