diff options
Diffstat (limited to 'postfix_wizard')
| -rw-r--r-- | postfix_wizard/Makefile | 2 | ||||
| -rw-r--r-- | postfix_wizard/main.cf.dist | 640 |
2 files changed, 1 insertions, 641 deletions
diff --git a/postfix_wizard/Makefile b/postfix_wizard/Makefile index 6a3f753a..154f7b60 100644 --- a/postfix_wizard/Makefile +++ b/postfix_wizard/Makefile @@ -8,7 +8,7 @@ install: mkdir -p --mode=u=rwx,g=rx,o=rx ${prefix}/share/wizards/postfix_wizard/scripts mkdir -p --mode=u=rwx,g=rx,o=rx ${prefix}/share/wizards/postfix_wizard/images install --mode=u=rw,g=r,o=r -p postfix.wiz ${prefix}/share/wizards/postfix_wizard - install --mode=u=rw,g=r,o=r -p main.cf.dist ${prefix}/share/wizards/postfix_wizard + install --mode=u=rw,g=r,o=r -p scripts/main.cf.dist.default ${prefix}/share/wizards/postfix_wizard install --mode=u=rwx,g=rx,o=rx -p scripts/Postfixconf.pm ${prefix}/share/wizards/postfix_wizard/scripts install --mode=u=rwx,g=rx,o=rx -p scripts/*.sh ${prefix}/share/wizards/postfix_wizard/scripts install --mode=u=rwx,g=rx,o=rx -p images/*.png ${prefix}/share/wizards/postfix_wizard/images diff --git a/postfix_wizard/main.cf.dist b/postfix_wizard/main.cf.dist deleted file mode 100644 index 1267ba64..00000000 --- a/postfix_wizard/main.cf.dist +++ /dev/null @@ -1,640 +0,0 @@ -# Global Postfix configuration file. This file lists only a subset -# of all 300+ parameters. See the postconf(5) manual page for a -# complete list. -# -# The general format of each line is: parameter = value. Lines -# that begin with whitespace continue the previous line. A value can -# contain references to other $names or ${name}s. -# -# NOTE - CHANGE NO MORE THAN 2-3 PARAMETERS AT A TIME, AND TEST IF -# POSTFIX STILL WORKS AFTER EVERY CHANGE. - -# SOFT BOUNCE -# -# The soft_bounce parameter provides a limited safety net for -# testing. When soft_bounce is enabled, mail will remain queued that -# would otherwise bounce. This parameter disables locally-generated -# bounces, and prevents the SMTP server from rejecting mail permanently -# (by changing 5xx replies into 4xx replies). However, soft_bounce -# is no cure for address rewriting mistakes or mail routing mistakes. -# -#soft_bounce = no - -# LOCAL PATHNAME INFORMATION -# -# The queue_directory specifies the location of the Postfix queue. -# This is also the root directory of Postfix daemons that run chrooted. -# See the files in examples/chroot-setup for setting up Postfix chroot -# environments on different UNIX systems. -# -queue_directory = /var/spool/postfix - -# The command_directory parameter specifies the location of all -# postXXX commands. -# -command_directory = /usr/sbin - -# The daemon_directory parameter specifies the location of all Postfix -# daemon programs (i.e. programs listed in the master.cf file). This -# directory must be owned by root. -# -daemon_directory = /usr/lib/postfix - -# QUEUE AND PROCESS OWNERSHIP -# -# The mail_owner parameter specifies the owner of the Postfix queue -# and of most Postfix daemon processes. Specify the name of a user -# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS -# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In -# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED -# USER. -# -mail_owner = postfix - -# The default_privs parameter specifies the default rights used by -# the local delivery agent for delivery to external file or command. -# These rights are used in the absence of a recipient user context. -# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER. -# -#default_privs = nobody - -# INTERNET HOST AND DOMAIN NAMES -# -# The myhostname parameter specifies the internet hostname of this -# mail system. The default is to use the fully-qualified domain name -# from gethostname(). $myhostname is used as a default value for many -# other configuration parameters. -# -#myhostname = host.domain.tld -#myhostname = virtual.domain.tld - -# The mydomain parameter specifies the local internet domain name. -# The default is to use $myhostname minus the first component. -# $mydomain is used as a default value for many other configuration -# parameters. -# -#mydomain = domain.tld - -# SENDING MAIL -# -# The myorigin parameter specifies the domain that locally-posted -# mail appears to come from. The default is to append $myhostname, -# which is fine for small sites. If you run a domain with multiple -# machines, you should (1) change this to $mydomain and (2) set up -# a domain-wide alias database that aliases each user to -# user@that.users.mailhost. -# -# For the sake of consistency between sender and recipient addresses, -# myorigin also specifies the default domain name that is appended -# to recipient addresses that have no @domain part. -# -#myorigin = $myhostname -#myorigin = $mydomain - -# RECEIVING MAIL - -# The inet_interfaces parameter specifies the network interface -# addresses that this mail system receives mail on. By default, -# the software claims all active interfaces on the machine. The -# parameter also controls delivery of mail to user@[ip.address]. -# -# See also the proxy_interfaces parameter, for network addresses that -# are forwarded to us via a proxy or network address translator. -# -# Note: you need to stop/start Postfix when this parameter changes. -# -inet_interfaces = localhost -#inet_interfaces = all -#inet_interfaces = $myhostname -#inet_interfaces = $myhostname, localhost - -# The proxy_interfaces parameter specifies the network interface -# addresses that this mail system receives mail on by way of a -# proxy or network address translation unit. This setting extends -# the address list specified with the inet_interfaces parameter. -# -# You must specify your proxy/NAT addresses when your system is a -# backup MX host for other domains, otherwise mail delivery loops -# will happen when the primary MX host is down. -# -#proxy_interfaces = -#proxy_interfaces = 1.2.3.4 - -# The mydestination parameter specifies the list of domains that this -# machine considers itself the final destination for. -# -# These domains are routed to the delivery agent specified with the -# local_transport parameter setting. By default, that is the UNIX -# compatible delivery agent that lookups all recipients in /etc/passwd -# and /etc/aliases or their equivalent. -# -# The default is $myhostname + localhost.$mydomain. On a mail domain -# gateway, you should also include $mydomain. -# -# Do not specify the names of virtual domains - those domains are -# specified elsewhere (see VIRTUAL_README). -# -# Do not specify the names of domains that this machine is backup MX -# host for. Specify those names via the relay_domains settings for -# the SMTP server, or use permit_mx_backup if you are lazy (see -# STANDARD_CONFIGURATION_README). -# -# The local machine is always the final destination for mail addressed -# to user@[the.net.work.address] of an interface that the mail system -# receives mail on (see the inet_interfaces parameter). -# -# Specify a list of host or domain names, /file/name or type:table -# patterns, separated by commas and/or whitespace. A /file/name -# pattern is replaced by its contents; a type:table is matched when -# a name matches a lookup key (the right-hand side is ignored). -# Continue long lines by starting the next line with whitespace. -# -# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS". -# -mydestination = $myhostname, localhost.$mydomain, localhost -#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain -#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain, -# mail.$mydomain, www.$mydomain, ftp.$mydomain - -# REJECTING MAIL FOR UNKNOWN LOCAL USERS -# -# The local_recipient_maps parameter specifies optional lookup tables -# with all names or addresses of users that are local with respect -# to $mydestination, $inet_interfaces or $proxy_interfaces. -# -# If this parameter is defined, then the SMTP server will reject -# mail for unknown local users. This parameter is defined by default. -# -# To turn off local recipient checking in the SMTP server, specify -# local_recipient_maps = (i.e. empty). -# -# The default setting assumes that you use the default Postfix local -# delivery agent for local delivery. You need to update the -# local_recipient_maps setting if: -# -# - You define $mydestination domain recipients in files other than -# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files. -# For example, you define $mydestination domain recipients in -# the $virtual_mailbox_maps files. -# -# - You redefine the local delivery agent in master.cf. -# -# - You redefine the "local_transport" setting in main.cf. -# -# - You use the "luser_relay", "mailbox_transport", or "fallback_transport" -# feature of the Postfix local delivery agent (see local(8)). -# -# Details are described in the LOCAL_RECIPIENT_README file. -# -# Beware: if the Postfix SMTP server runs chrooted, you probably have -# to access the passwd file via the proxymap service, in order to -# overcome chroot restrictions. The alternative, having a copy of -# the system passwd file in the chroot jail is just not practical. -# -# The right-hand side of the lookup tables is conveniently ignored. -# In the left-hand side, specify a bare username, an @domain.tld -# wild-card, or specify a user@domain.tld address. -# -#local_recipient_maps = unix:passwd.byname $alias_maps -#local_recipient_maps = proxy:unix:passwd.byname $alias_maps -#local_recipient_maps = - -# The unknown_local_recipient_reject_code specifies the SMTP server -# response code when a recipient domain matches $mydestination or -# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty -# and the recipient address or address local-part is not found. -# -# The default setting is 550 (reject mail) but it is safer to start -# with 450 (try again later) until you are certain that your -# local_recipient_maps settings are OK. -# -unknown_local_recipient_reject_code = 550 - -# TRUST AND RELAY CONTROL - -# The mynetworks parameter specifies the list of "trusted" SMTP -# clients that have more privileges than "strangers". -# -# In particular, "trusted" SMTP clients are allowed to relay mail -# through Postfix. See the smtpd_recipient_restrictions parameter -# in postconf(5). -# -# You can specify the list of "trusted" network addresses by hand -# or you can let Postfix do it for you (which is the default). -# -# By default (mynetworks_style = subnet), Postfix "trusts" SMTP -# clients in the same IP subnetworks as the local machine. -# On Linux, this does works correctly only with interfaces specified -# with the "ifconfig" command. -# -# Specify "mynetworks_style = class" when Postfix should "trust" SMTP -# clients in the same IP class A/B/C networks as the local machine. -# Don't do this with a dialup site - it would cause Postfix to "trust" -# your entire provider's network. Instead, specify an explicit -# mynetworks list by hand, as described below. -# -# Specify "mynetworks_style = host" when Postfix should "trust" -# only the local machine. -# -#mynetworks_style = class -#mynetworks_style = subnet -mynetworks_style = host - -# Alternatively, you can specify the mynetworks list by hand, in -# which case Postfix ignores the mynetworks_style setting. -# -# Specify an explicit list of network/netmask patterns, where the -# mask specifies the number of bits in the network part of a host -# address. -# -# You can also specify the absolute pathname of a pattern file instead -# of listing the patterns here. Specify type:table for table-based lookups -# (the value on the table right-hand side is not used). -# -#mynetworks = 168.100.189.0/28, 127.0.0.0/8 -#mynetworks = $config_directory/mynetworks -#mynetworks = hash:/etc/postfix/network_table - -# The relay_domains parameter restricts what destinations this system will -# relay mail to. See the smtpd_recipient_restrictions description in -# postconf(5) for detailed information. -# -# By default, Postfix relays mail -# - from "trusted" clients (IP address matches $mynetworks) to any destination, -# - from "untrusted" clients to destinations that match $relay_domains or -# subdomains thereof, except addresses with sender-specified routing. -# The default relay_domains value is $mydestination. -# -# In addition to the above, the Postfix SMTP server by default accepts mail -# that Postfix is final destination for: -# - destinations that match $inet_interfaces or $proxy_interfaces, -# - destinations that match $mydestination -# - destinations that match $virtual_alias_domains, -# - destinations that match $virtual_mailbox_domains. -# These destinations do not need to be listed in $relay_domains. -# -# Specify a list of hosts or domains, /file/name patterns or type:name -# lookup tables, separated by commas and/or whitespace. Continue -# long lines by starting the next line with whitespace. A file name -# is replaced by its contents; a type:name table is matched when a -# (parent) domain appears as lookup key. -# -# NOTE: Postfix will not automatically forward mail for domains that -# list this system as their primary or backup MX host. See the -# permit_mx_backup restriction description in postconf(5). -# -#relay_domains = $mydestination - -# INTERNET OR INTRANET - -# The relayhost parameter specifies the default host to send mail to -# when no entry is matched in the optional transport(5) table. When -# no relayhost is given, mail is routed directly to the destination. -# -# On an intranet, specify the organizational domain name. If your -# internal DNS uses no MX records, specify the name of the intranet -# gateway host instead. -# -# In the case of SMTP, specify a domain, host, host:port, [host]:port, -# [address] or [address]:port; the form [host] turns off MX lookups. -# -# If you're connected via UUCP, see also the default_transport parameter. -# -#relayhost = $mydomain -#relayhost = [gateway.my.domain] -#relayhost = [mailserver.isp.tld] -#relayhost = uucphost -#relayhost = [an.ip.add.ress] - -# REJECTING UNKNOWN RELAY USERS -# -# The relay_recipient_maps parameter specifies optional lookup tables -# with all addresses in the domains that match $relay_domains. -# -# If this parameter is defined, then the SMTP server will reject -# mail for unknown relay users. This feature is off by default. -# -# The right-hand side of the lookup tables is conveniently ignored. -# In the left-hand side, specify an @domain.tld wild-card, or specify -# a user@domain.tld address. -# -#relay_recipient_maps = hash:/etc/postfix/relay_recipients - -# INPUT RATE CONTROL -# -# The in_flow_delay configuration parameter implements mail input -# flow control. This feature is turned on by default, although it -# still needs further development (it's disabled on SCO UNIX due -# to an SCO bug). -# -# A Postfix process will pause for $in_flow_delay seconds before -# accepting a new message, when the message arrival rate exceeds the -# message delivery rate. With the default 100 SMTP server process -# limit, this limits the mail inflow to 100 messages a second more -# than the number of messages delivered per second. -# -# Specify 0 to disable the feature. Valid delays are 0..10. -# -#in_flow_delay = 1s - -# ADDRESS REWRITING -# -# The ADDRESS_REWRITING_README document gives information about -# address masquerading or other forms of address rewriting including -# username->Firstname.Lastname mapping. - -# ADDRESS REDIRECTION (VIRTUAL DOMAIN) -# -# The VIRTUAL_README document gives information about the many forms -# of domain hosting that Postfix supports. - -# "USER HAS MOVED" BOUNCE MESSAGES -# -# See the discussion in the ADDRESS_REWRITING_README document. - -# TRANSPORT MAP -# -# See the discussion in the ADDRESS_REWRITING_README document. - -# ALIAS DATABASE -# -# The alias_maps parameter specifies the list of alias databases used -# by the local delivery agent. The default list is system dependent. -# -# On systems with NIS, the default is to search the local alias -# database, then the NIS alias database. See aliases(5) for syntax -# details. -# -# If you change the alias database, run "postalias /etc/aliases" (or -# wherever your system stores the mail alias file), or simply run -# "newaliases" to build the necessary DBM or DB file. -# -# It will take a minute or so before changes become visible. Use -# "postfix reload" to eliminate the delay. -# -#alias_maps = dbm:/etc/aliases -alias_maps = hash:/etc/aliases -#alias_maps = hash:/etc/aliases, nis:mail.aliases -#alias_maps = netinfo:/aliases - -# The alias_database parameter specifies the alias database(s) that -# are built with "newaliases" or "sendmail -bi". This is a separate -# configuration parameter, because alias_maps (see above) may specify -# tables that are not necessarily all under control by Postfix. -# -#alias_database = dbm:/etc/aliases -#alias_database = dbm:/etc/mail/aliases -#alias_database = hash:/etc/aliases -#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases - -# ADDRESS EXTENSIONS (e.g., user+foo) -# -# The recipient_delimiter parameter specifies the separator between -# user names and address extensions (user+foo). See canonical(5), -# local(8), relocated(5) and virtual(5) for the effects this has on -# aliases, canonical, virtual, relocated and .forward file lookups. -# Basically, the software tries user+foo and .forward+foo before -# trying user and .forward. -# -#recipient_delimiter = + - -# DELIVERY TO MAILBOX -# -# The home_mailbox parameter specifies the optional pathname of a -# mailbox file relative to a user's home directory. The default -# mailbox file is /var/spool/mail/user or /var/mail/user. Specify -# "Maildir/" for qmail-style delivery (the / is required). -# -#home_mailbox = Mailbox -#home_mailbox = Maildir/ - -# The mail_spool_directory parameter specifies the directory where -# UNIX-style mailboxes are kept. The default setting depends on the -# system type. -# -#mail_spool_directory = /var/mail -#mail_spool_directory = /var/spool/mail - -# The mailbox_command parameter specifies the optional external -# command to use instead of mailbox delivery. The command is run as -# the recipient with proper HOME, SHELL and LOGNAME environment settings. -# Exception: delivery for root is done as $default_user. -# -# Other environment variables of interest: USER (recipient username), -# EXTENSION (address extension), DOMAIN (domain part of address), -# and LOCAL (the address localpart). -# -# Unlike other Postfix configuration parameters, the mailbox_command -# parameter is not subjected to $parameter substitutions. This is to -# make it easier to specify shell syntax (see example below). -# -# Avoid shell meta characters because they will force Postfix to run -# an expensive shell process. Procmail alone is expensive enough. -# -# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN -# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER. -# -#mailbox_command = /some/where/procmail -#mailbox_command = /some/where/procmail -a "$EXTENSION" - -# The mailbox_transport specifies the optional transport in master.cf -# to use after processing aliases and .forward files. This parameter -# has precedence over the mailbox_command, fallback_transport and -# luser_relay parameters. -# -# Specify a string of the form transport:nexthop, where transport is -# the name of a mail delivery transport defined in master.cf. The -# :nexthop part is optional. For more details see the sample transport -# configuration file. -# -# NOTE: if you use this feature for accounts not in the UNIX password -# file, then you must update the "local_recipient_maps" setting in -# the main.cf file, otherwise the SMTP server will reject mail for -# non-UNIX accounts with "User unknown in local recipient table". -# -#mailbox_transport = lmtp:unix:/file/name -#mailbox_transport = cyrus - -# The fallback_transport specifies the optional transport in master.cf -# to use for recipients that are not found in the UNIX passwd database. -# This parameter has precedence over the luser_relay parameter. -# -# Specify a string of the form transport:nexthop, where transport is -# the name of a mail delivery transport defined in master.cf. The -# :nexthop part is optional. For more details see the sample transport -# configuration file. -# -# NOTE: if you use this feature for accounts not in the UNIX password -# file, then you must update the "local_recipient_maps" setting in -# the main.cf file, otherwise the SMTP server will reject mail for -# non-UNIX accounts with "User unknown in local recipient table". -# -#fallback_transport = lmtp:unix:/file/name -#fallback_transport = cyrus -#fallback_transport = - -# The luser_relay parameter specifies an optional destination address -# for unknown recipients. By default, mail for unknown@$mydestination, -# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned -# as undeliverable. -# -# The following expansions are done on luser_relay: $user (recipient -# username), $shell (recipient shell), $home (recipient home directory), -# $recipient (full recipient address), $extension (recipient address -# extension), $domain (recipient domain), $local (entire recipient -# localpart), $recipient_delimiter. Specify ${name?value} or -# ${name:value} to expand value only when $name does (does not) exist. -# -# luser_relay works only for the default Postfix local delivery agent. -# -# NOTE: if you use this feature for accounts not in the UNIX password -# file, then you must specify "local_recipient_maps =" (i.e. empty) in -# the main.cf file, otherwise the SMTP server will reject mail for -# non-UNIX accounts with "User unknown in local recipient table". -# -#luser_relay = $user@other.host -#luser_relay = $local@other.host -#luser_relay = admin+$local - -# JUNK MAIL CONTROLS -# -# The controls listed here are only a very small subset. The file -# SMTPD_ACCESS_README provides an overview. - -# The header_checks parameter specifies an optional table with patterns -# that each logical message header is matched against, including -# headers that span multiple physical lines. -# -# By default, these patterns also apply to MIME headers and to the -# headers of attached messages. With older Postfix versions, MIME and -# attached message headers were treated as body text. -# -# For details, see "man header_checks". -# -#header_checks = regexp:/etc/postfix/header_checks - -# FAST ETRN SERVICE -# -# Postfix maintains per-destination logfiles with information about -# deferred mail, so that mail can be flushed quickly with the SMTP -# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld". -# See the ETRN_README document for a detailed description. -# -# The fast_flush_domains parameter controls what destinations are -# eligible for this service. By default, they are all domains that -# this server is willing to relay mail to. -# -#fast_flush_domains = $relay_domains - -# SHOW SOFTWARE VERSION OR NOT -# -# The smtpd_banner parameter specifies the text that follows the 220 -# code in the SMTP server's greeting banner. Some people like to see -# the mail version advertised. By default, Postfix shows no version. -# -# You MUST specify $myhostname at the start of the text. That is an -# RFC requirement. Postfix itself does not care. -# -#smtpd_banner = $myhostname ESMTP $mail_name -#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version) -smtpd_banner = $myhostname ESMTP $mail_name ($mail_version) (Mandrakelinux) - -# PARALLEL DELIVERY TO THE SAME DESTINATION -# -# How many parallel deliveries to the same user or domain? With local -# delivery, it does not make sense to do massively parallel delivery -# to the same user, because mailbox updates must happen sequentially, -# and expensive pipelines in .forward files can cause disasters when -# too many are run at the same time. With SMTP deliveries, 10 -# simultaneous connections to the same domain could be sufficient to -# raise eyebrows. -# -# Each message delivery transport has its XXX_destination_concurrency_limit -# parameter. The default is $default_destination_concurrency_limit for -# most delivery transports. For the local delivery agent the default is 2. - -#local_destination_concurrency_limit = 2 -#default_destination_concurrency_limit = 20 - -# DEBUGGING CONTROL -# -# The debug_peer_level parameter specifies the increment in verbose -# logging level when an SMTP client or server host name or address -# matches a pattern in the debug_peer_list parameter. -# -debug_peer_level = 2 - -# The debug_peer_list parameter specifies an optional list of domain -# or network patterns, /file/name patterns or type:name tables. When -# an SMTP client or server host name or address matches a pattern, -# increase the verbose logging level by the amount specified in the -# debug_peer_level parameter. -# -#debug_peer_list = 127.0.0.1 -#debug_peer_list = some.domain - -# The debugger_command specifies the external command that is executed -# when a Postfix daemon program is run with the -D option. -# -# Use "command .. & sleep 5" so that the debugger can attach before -# the process marches on. If you use an X-based debugger, be sure to -# set up your XAUTHORITY environment variable before starting Postfix. -# -debugger_command = - PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin - xxgdb $daemon_directory/$process_name $process_id & sleep 5 - -# If you don't have X installed on the Postfix machine, try: -# debugger_command = -# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont; -# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1 -# >$config_directory/$process_name.$process_id.log & sleep 5 - -# OTHER OPTIONS (Mandrakelinux) -# The delay_warning_time specifies after how many hours a warning -# is sent that mail has not yet been delivered. By default, no warning -# is sent. -# -delay_warning_time = 4 - -# INSTALL-TIME CONFIGURATION INFORMATION -# -# The following parameters are used when installing a new Postfix version. -# -# sendmail_path: The full pathname of the Postfix sendmail command. -# This is the Sendmail-compatible mail posting interface. -# -sendmail_path = /usr/sbin/sendmail.postfix - -# newaliases_path: The full pathname of the Postfix newaliases command. -# This is the Sendmail-compatible command to build alias databases. -# -newaliases_path = /usr/bin/newaliases.postfix - -# mailq_path: The full pathname of the Postfix mailq command. This -# is the Sendmail-compatible mail queue listing command. -# -mailq_path = /usr/bin/mailq.postfix - -# setgid_group: The group for mail submission and queue management -# commands. This must be a group name with a numerical group ID that -# is not shared with other accounts, not even with the Postfix account. -# -setgid_group = postdrop - -# html_directory: The location of the Postfix HTML documentation. -# -html_directory = /usr/share/doc/postfix-2.1.5/html - -# manpage_directory: The location of the Postfix on-line manual pages. -# -manpage_directory = /usr/share/man - -# sample_directory: The location of the Postfix sample configuration files. -# This parameter is obsolete as of Postfix 2.1. -# -sample_directory = /usr/share/doc/postfix-2.1.5/samples - -# readme_directory: The location of the Postfix README files. -# -readme_directory = /usr/share/doc/postfix-2.1.5/README_FILES |