diff options
Diffstat (limited to 'po/de.po')
-rw-r--r-- | po/de.po | 1342 |
1 files changed, 485 insertions, 857 deletions
@@ -1,5 +1,10 @@ # Drakwizard wizard's Portable Object Template file # Copyright (C) 2002 MandrakeSoft S.A. +# +# NOTE: sometimes "\q" appear in msgid around a word; the \q sequences +# are for quote marks; put them in the translation too; or put proper +# quotation marks for your language. +# # Stefan Siegel <siegel@linuc-mandrake.com> 2002. # msgid "" @@ -13,825 +18,407 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -msgid "of the client available to other machines into your network." -msgstr "" - -msgid "To accept these values, and add your client, click on" -msgstr "" - -msgid "" -"Press next to configure these parameters now, or Cancel to exit this wizard." -msgstr "" - -msgid "OK" -msgstr "OK" - -msgid "Name of the machine :" -msgstr "Rechnername:" - -msgid "Your client on the network will be identified by name, as in" -msgstr "" - -msgid "DNS Client Wizard" -msgstr "DNS-Klienten Assistent" - -msgid "Client wizard" -msgstr "Klienten Assistent" - -msgid "The wizard collected the following parameter" -msgstr "" - -msgid "Press next to begin, or Cancel to leave this wizard." -msgstr "" - -msgid "The wizard successfully added the client." -msgstr "Der Assistent hat den Klienten erfolgreich hinzugefügt." - -msgid "(you don't need to type the domain after the name)" -msgstr "(Sie müssen die Domäne nach dem Rechnernamen nicht angeben)" - -msgid "IP number of the machine :" -msgstr "IP des Rechners:" - -msgid "" -"You have to configure the basic network parameters before launch this wizard." -msgstr "" - -msgid "Warning:" -msgstr "Warnung:" - -msgid "" -"Note that the given IP number and client name should be unique in the " -"network." -msgstr "" - -msgid "Adding a new client to your network" -msgstr "Einen neuen Klienten in Ihr Netzwerk aufnehmen" - -msgid "with the Client configuration" -msgstr "" - -msgid "System error, no configuration done" -msgstr "" - -msgid "Client identification:" -msgstr "" - -msgid "If you choose to configure now, you will automatically continue" -msgstr "" - -msgid "This wizard will help you in adding a new client in your local DNS." -msgstr "" - -msgid "This is not a valid address... press next to continue" -msgstr "" - -msgid "an (unique) IP address, in the usual dotted syntax." -msgstr "" - -msgid "A client of your local network is a machine connected to the" -msgstr "" - -msgid "Client IP:" -msgstr "" - -msgid "Configure" -msgstr "" - -msgid "\\qConfigure\\q or use the Back button to correct them." -msgstr "" - -msgid "You need to be root to run this wizard" -msgstr "" - -msgid "clientname.company.net. Every machine on the network must have" -msgstr "" - -msgid "Network not configured yet" -msgstr "" - -msgid "The server will use the informations you enter here to make the name" -msgstr "" - -msgid "You have entered a machine name or an IP number already used." -msgstr "" - -msgid "Press next if you want to change the already existing value," -msgstr "" - -msgid "Quit" -msgstr "" - -msgid "needed to add a client to your network:" -msgstr "" - -msgid "Congratulations" -msgstr "" - -msgid "or back to correct your choice." -msgstr "" - -msgid "network having its own name and IP number." -msgstr "" - -msgid "Client name" -msgstr "" - -msgid "User addition" -msgstr "" - -msgid "Please type a password for the root user:" -msgstr "" - -msgid "The wizard successfully configured your" -msgstr "" - -msgid "This wizard will help you configuring" -msgstr "" - -msgid "Configuring the MySQL Database Server" -msgstr "" - -msgid "Confirm" -msgstr "" - -msgid "Password:" -msgstr "" - -msgid "with the MySQL Database configuration" -msgstr "" - -msgid "Username:" -msgstr "" - -msgid "\\qConfirm\\q or use the Back button to correct them." -msgstr "" - -msgid "Add" -msgstr "" - -msgid "To accept this value, and configure your server, click on" -msgstr "" - -msgid "Sorry, you must be root to do this..." -msgstr "" - -msgid "Database Server" -msgstr "" - -msgid "Note: This user will have all permissions" -msgstr "" - -msgid "MySQL Database wizard" -msgstr "" - -msgid "Configuration Wizard" -msgstr "" - -msgid "To run your server, you first need to specify a root password" -msgstr "" - -msgid "needed to configure your MySQL Database Server" -msgstr "" - -msgid "Root Password:" -msgstr "" - -msgid "MySQL Database Server" -msgstr "" - -msgid "Please enter a username and password to add a user" -msgstr "" - -msgid "the MySQL Database Server for your network." -msgstr "" - -msgid "needed to configure your DHCP service:" -msgstr "" - -msgid "Fix it" -msgstr "" - -msgid "Lowest IP Address:" -msgstr "" - -msgid "IP addresses are a dotted list of four numbers smaller than 256." -msgstr "" - -msgid "Select the range of addresses assigned to the workstations" -msgstr "" - -msgid "DHCP Wizard" -msgstr "" - -msgid "Range of addresses used by dhcp" -msgstr "" - -msgid "services of your server." -msgstr "" - -msgid "The wizard successfully configured the DHCP" -msgstr "" - -msgid "by the DHCP service; unless you have special needs," -msgstr "" - -msgid "Highest IP address:" -msgstr "Höchste IP-Adresse:" - -msgid "with the DHCP configuration" -msgstr "" - -msgid "Highest IP Address:" -msgstr "Höchste IP-Adresse:" - -msgid "the DHCP services of your server." -msgstr "" - -msgid "SSystem error, no configuration done." -msgstr "" - -msgid "The IP range specified is not correct" -msgstr "" - -msgid "you can safely accept the proposed values." -msgstr "" - -msgid "DHCP is a service that automatically assigns" -msgstr "" - -msgid "To accept these values, and configure your server, click on" -msgstr "" - -msgid "networking addresses to your workstations." -msgstr "" - -msgid "Lowest IP Address:" -msgstr "" - -msgid "DHCP Configuration Wizard" -msgstr "" - -msgid "Configuring the DHCP Server" -msgstr "" - -msgid "in correspondance a machine with an internet host name" -msgstr "" - -msgid "provide a local DNS service for local computers names," -msgstr "" - -msgid "Your setting could be accepted, but you will not be able to identify" -msgstr "" - -msgid "DNS will allow your network to communicate with the Internet using" -msgstr "" - -msgid "Secondary DNS Address:" -msgstr "" - -msgid "machine names outside your local network." -msgstr "" - -msgid "DNS (Domain Name Server) is the service that put" -msgstr "" - -msgid "with non-local requests forwarded to an outside DNS." -msgstr "" - -msgid "this address are given by your Internet provider." -msgstr "" - -msgid "Press next to leave these values empty, or back to enter a value." -msgstr "" - -msgid "Primary DNS Address:" -msgstr "" - -msgid "DNS Wizard" -msgstr "" - -msgid "Configuring the DNS Server" -msgstr "" - -msgid "DNS Configuration Wizard" -msgstr "" - -msgid "The wizard successfully configured the DNS" -msgstr "" - -msgid "This wizard will help you configuring the DNS" -msgstr "" - -msgid "with the DNS configuration" -msgstr "" - -msgid "services of your server. This configuration will" -msgstr "" - -msgid "needed to configure your DNS service:" -msgstr "" - -msgid "You have entered an empty address for the DNS server." -msgstr "" - -msgid "standard internet host names. In order to configure DNS, you must" -msgstr "" - -msgid "DNS Server Addresses" -msgstr "" - -msgid "provide the IP address of primary and secondary DNS server; usually" -msgstr "" - -msgid "The firewall can be configured to offer different levels of protection;" -msgstr "" - -msgid "the Medium level is usually the most appropriate." -msgstr "" - -msgid "Device" -msgstr "" - -msgid "Some terrible happened" -msgstr "" - -msgid "Firewall wizard" -msgstr "" - -msgid "choose the level that corresponds to your needs. If you don't know," -msgstr "" - -msgid "The firewall protects your internal network from" -msgstr "" - -msgid "The device name is not correct" -msgstr "" - -msgid "unauthorized accesses from the Internet." -msgstr "" - -msgid "Protection Level" -msgstr "" - -msgid "The wizard successfully configured" -msgstr "" - -msgid "Firewall Network Device" -msgstr "" - -msgid "Configuring the Firewall" -msgstr "" - -msgid "This wizard will help you configuring your server firewall." -msgstr "" - -msgid "needed to configure your firewall:" -msgstr "" - -msgid "This Wizard need to run as root" -msgstr "" - -msgid "Medium - web, ftp and ssh shown to outside" -msgstr "" - -msgid "Strong - no outside visibility, users limited to web" -msgstr "" - -msgid "None - No protection" +msgid "Enable the Web Server for the Intranet" msgstr "" -msgid "Internet Network Device:" +msgid "Internet Web Server:" msgstr "" -msgid "choose the device you are using for the external connection." +msgid "This wizard will help you configuring the Web Server for your network." msgstr "" -msgid "Protecion Level:" +msgid "Enable the Web Server for the Intranet and for the Internet" msgstr "" -msgid "Fix It" +msgid "Web Server" msgstr "" -msgid "Firewall Configuration Wizard" +msgid "Web Server Configuration Wizard" msgstr "" -msgid "The firewall need to know how your server is connected to Internet;" +msgid "Configuring the Web Server" msgstr "" -msgid "Exit" +msgid "Web wizard" msgstr "" -msgid "your server firewall." +msgid "" +"The wizard collected the following parameters needed to configure your Web " +"Server" msgstr "" -msgid "Low - Light filtering, standard services available" +msgid "The wizard successfully configured your Intranet/Internet Web Server" msgstr "" -msgid "Internet FTP Server:" +msgid "Don't check any box if you don't want to activate your Web Server." msgstr "" -msgid "Your server can act as a FTP Server toward your internal" +msgid "Select the kind of Web service you want to activate:" msgstr "" -msgid "Enable the FTP Server for the Intranet" +msgid "Intranet Web Server:" msgstr "" -msgid "FTP wizard" +msgid "" +"Your server can act as a Web Server toward your internal network (intranet) " +"and as a Web Server for the Internet." msgstr "" -msgid "Enable the FTP Server for the Intranet and for the Internet" +msgid "Server IP address:" msgstr "" -msgid "FTP Server" +msgid "Network Address" msgstr "" -msgid "Don't check any box if you don't want to activate your FTP Server." +msgid "IP net address:" msgstr "" -msgid "Configuring the FTP Server" +msgid "Network Device" msgstr "" msgid "" -"Warning\\nYou are in dhcp, server may doesn't work with your " -"configuration." +"The wizard successfully configured the basic networking services of your " +"server." msgstr "" -msgid "Intranet FTP Server:" -msgstr "" - -msgid "the FTP Server for your network." +msgid "" +"(you can change here these values if you know exactly what you\\'re doing)" msgstr "" -msgid "Select the kind of FTP service you want to activate:" +msgid "Server Address" msgstr "" -msgid "Intranet/Internet FTP Server" +msgid "The network address is wrong" msgstr "" -msgid "network (intranet) and as a FTP Server for the Internet." +msgid "Server Name:" msgstr "" -msgid "FTP Server Configuration Wizard" +msgid "" +"The server IP address is a number identifing your server in your network; " +"the proposed value designed for a private network , with no internet " +"visibility, or connected using IP masquerading; unless you know what you are " +"doing, accept the default value." msgstr "" -msgid "needed to configure your FTP Server" +msgid "" +"External connection is a network from which the computer is client (Internet " +"or upstream network), connected using another network card or a modem." msgstr "" -msgid "Global" +msgid "" +"The wizard collected the following parameters needed to configure your " +"network" msgstr "" -msgid "->dns" +msgid "Host Name:" msgstr "" -msgid "->mail" +msgid "" +"The hostname is the name under which your server will be known from the " +"other workstations in your network and maybe on the Internet (depending of " +"your upstream configuration)." msgstr "" -msgid "Ftp configuration wizard" +msgid "Gateway IP:" msgstr "" -msgid "Global Configuration Wizard" +msgid "Configuring your network" msgstr "" -msgid "Press next to begin:" +msgid "Network Address:" msgstr "" -msgid "DHCP configuration wizard" +msgid "" +"Devices are presented with the Linux name and, if known, with the card " +"description." msgstr "" -msgid "Congratulations, your server have been" +msgid "Wizard Error." msgstr "" -msgid "->firewall" +msgid "" +"Note: the gateway IP address should be non empty if you want an access to " +"outside world." msgstr "" -msgid "->ftp" +msgid "" +"Choose the network device (usually a card) the server should use to connect " +"to your network. It\\'s the device for the local network, probably not the " +"same device used for internet access." msgstr "" -msgid "Domain Names wizard" +msgid "Note about networking" msgstr "" -msgid "This wizard will help you in configuring" +msgid "This wizard will set the basic networking parameter of your server." msgstr "" -msgid "->samba" +msgid "" +"This wizard will help you configuring the basic networking services of your " +"server." msgstr "" -msgid "The configuration process will involve the following steps:" +msgid "External gateway" msgstr "" -msgid "Basic server wizard" +msgid "" +"Host names must be in the form \\qhost.domain.domaintype\\q; if your server " +"will be an Internet server, the domain name should be the name registered " +"with your provider. If you will only have intranet any valid name is OK, " +"like \\qcompany.net\\q." msgstr "" -msgid "Web configuration wizard" +msgid "The host name is not correct" msgstr "" -msgid "different services of your machine (DNS, Mail, DHCP...)." +msgid "Basic Network Configuration Wizard" msgstr "" -msgid "->News" +msgid "This page compute the default server address; should be invisible." msgstr "" -msgid "->Server" +msgid "Host Name" msgstr "" -msgid "Mail configuration wizard" +msgid "Computed domain Name" msgstr "" -msgid "correctly configured!" +msgid "Server Address:" msgstr "" -msgid "Configuration tasks" +msgid "" +"So, it\\'s very probable that domain name and IP adresses for this local " +"network are DIFFERENT from the server \\qexternal\\q connection." msgstr "" -msgid "->time" +msgid "This page compute the domainname; it should be invisible" msgstr "" -msgid "Welcome to the configuration wizard!" +msgid "Warning" msgstr "" -msgid "->web" +msgid "Device:" msgstr "" -msgid "->Dhcp" +msgid "" +"As regards these wizards, your computer is seen as a server managing his own " +"local network (C class network)." msgstr "" -msgid "News configuration wizard" +msgid "" +"The network address is a number identifing your network; the proposed value " +"is designed for a configuration not connected to Internet, or connected " +"using IP masquerading; unless you know what you are doing, accept the " +"default value." msgstr "" -msgid "[done]" +msgid "" +"Here is your current value for the external gateway (value specified during " +"the initial installation). The device (network card or modem) should be " +"different from the one used for the internal network." msgstr "" -msgid "Firewall configuration wizard" +msgid "net device" msgstr "" -msgid "Time wizard" +msgid "" +"Network addresses are a list of four numbers smaller than 256, separated by " +"dots; the last number of the list must be zero." msgstr "" -msgid "Samba configuration wizard" +msgid "Server Wizard" msgstr "" -msgid "Note however that you must be root to accomplish some of the tasks." +msgid "Gateway device:" msgstr "" -msgid "News Wizard" +msgid "The Server IP address is incorrect" msgstr "" -msgid "The polling period is not correct" +msgid "" +"You should not run any other applications while running this wizard and at " +"the end of the wizard you should exit your session and redo the login." msgstr "" -msgid "Depending on the kind of internet connection you have, an appropriate" +msgid "Enable Server Printer Sharing" msgstr "" -msgid "The news server name is the name of the host providing the Internet" +msgid "Samba Configuration Wizard" msgstr "" -msgid "Internet News service of your server." +msgid "Samba wizard" msgstr "" -msgid "Configuring the Internet News" +msgid "No Samba service has been requested" msgstr "" -msgid "with the NEWS configuration" +msgid "Press Quit to exit or Back to correct your choice" msgstr "" -msgid "latest Internet News; the polling period set the intervall between two" +msgid "Print Server:" msgstr "" -msgid "News Server Name:" +msgid "Server Banner:" msgstr "" -msgid "needed to configure your Internet News Service:" -msgstr "" +#, fuzzy +msgid "The wizard successfully configured your Samba server." +msgstr "Der Assistent hat den Klienten erfolgreich hinzugefügt." -msgid "consecutive polling." +msgid "Samba need to know the Windows Workgroup it will serve." msgstr "" -msgid "is usually \\qnews.provider.com\\q." +msgid "" +"Samba can provide a common file sharing area to your Windows workstation, " +"and can also provide printer sharing for the printers connected to your " +"server." msgstr "" -msgid "news to your network; the name is usually provided by your provider." +msgid "Enable Common File Sharing Area" msgstr "" -msgid "News Server" +msgid "The Workgroup is wrong" msgstr "" -msgid "Your server will regularly poll the News Server for obtaning the" +msgid "Server Banner." msgstr "" -msgid "News Server:" +msgid "Configuring Samba" msgstr "" msgid "" -"example, if your provider is \\qprovider.com\\q, the internet new server" -msgstr "" - -msgid "Polling Interval:" +"Samba allows your server to behave as a file and print server for " +"workstations running non-Linux systems." msgstr "" -msgid "Polling Period" -msgstr "" - -msgid "polling period can change between 6 and 24 hours." +msgid "File Sharing:" msgstr "" msgid "" -"Internet host names must be in the form \\qhost.domain.domaintype\\q; for" +"The banner is the way this server will be described in the Windows " +"workstations." msgstr "" -msgid "The news server name is not correct" -msgstr "" - -msgid "Polling Period (Hours):" -msgstr "" - -msgid "Welcome to the News Wizard" -msgstr "" - -msgid "the Internet News services for your network." +msgid "Workgroup" msgstr "" -msgid "with the POSTFIX configuration" +msgid "Banner:" msgstr "" -msgid "needed to configure your Internet Mail Service:" +msgid "" +"The wizard collected the following parameters needed to configure Samba." msgstr "" -msgid "Do It" +msgid "Enabled Samba Services" msgstr "" -msgid "See you soon!" +msgid "" +"This wizard will help you configuring the Samba services of your server." msgstr "" -msgid "This should be chosen consistently with the address" +msgid "The Server Banner is incorrect" msgstr "" -msgid "Hmmm" +msgid "" +"If you choose to configure now, you will automatically continue with the " +"SAMBA configuration" msgstr "" -msgid "You entered an empty address for the mail gateway." +msgid "Workgroup:" msgstr "" -msgid "Mail Server Name:" +msgid "For information, here is /var/spool/squid space on disk:" msgstr "" -msgid "Postfix wizard" +msgid "This wizard will help you configuring your proxy server." msgstr "" -msgid "There seems to be a problem... go ask to the big black man downstairs" +msgid "Upper level proxy port:" msgstr "" -msgid "Configuring the Internet Mail" +msgid "The proxy can be configured to use different access control levels." msgstr "" msgid "" -"outside your local network. Press next to continue, or back to enter a value." -msgstr "" - -msgid "the Internet Mail services for your network." -msgstr "" - -msgid "Your choice can be accepted, but this will not allow you to send mail" -msgstr "" - -msgid "Internet Mail Gateway" +"The wizard collected the following parameters needed to configure your proxy:" msgstr "" msgid "" -"example, if your provider is \\qprovider.com\\q, the internet mail server" -msgstr "" - -msgid "Sorry, you have to be root to run this wizard..." -msgstr "" - -msgid "Outgoing Mail Address" -msgstr "" - -msgid "End" -msgstr "" - -msgid "Internet Mail Configuration Wizard" +"As an option, Squid can be configured in proxy cascading. You can add a new " +"upper level proxy by specifying its hostname and port." msgstr "" -msgid "Internet Mail service of your server." +msgid "" +"Choose the level that suit to your needs. If you don\\'t know,the Local " +"Network level is usually the most appropriate. Beware that the All level may " +"be not secure." msgstr "" -msgid "will show in the \\qFrom:\\q and \\qReply-to\\q field." +msgid "Authorised network:" msgstr "" -msgid "that will take care of the final delivery." +msgid "Proxy Configuration Wizard" msgstr "" -msgid "You can select the kind of address that outgoing mail" +msgid "" +"You can use either a numeric format like \\q192.168.1.0/255.255.255.0\\q or " +"a text format like \\q.domain.net\\q" msgstr "" -msgid "Masquerade not good!" +msgid "Localhost - access restricted to this server only" msgstr "" -msgid "is usually \\qsmtp.provider.com\\q." +msgid "" +"Press Next if you want to keep this value, or Back to correct your choice." msgstr "" -msgid "Form of the Address" +msgid "Proxy Cache Size" msgstr "" -msgid "Mail Address:" +msgid "You must choose a port greater than 1024 and lower than 65535" msgstr "" -msgid "you use for incoming mail." +msgid "No upper level proxy (recommended)" msgstr "" -msgid "Your server will send the outgoing through a mail gateway," +msgid "Grant acces on local network" msgstr "" msgid "" -"Access will be allowed for hosts on the network. Here is the information " -"found about your current local network, you can modify it if needed." +"Enter the qualified hostname (like \\qcache.domain.net\\q) and the port of " +"the proxy to use." msgstr "" -msgid "Proxy Configuration Wizard" +msgid "Press back to change the value." msgstr "" -msgid "Local Network - access for local network (recommended)" +msgid "Proxy Port" msgstr "" -msgid "You must choose a port greater than 1024 and lower than 65535" +msgid "" +"If you choose to configure now, you will automatically continue with the " +"Proxy configuration." msgstr "" msgid "Access Control:" msgstr "" -msgid "Configuring the Proxy" -msgstr "" - -msgid "Define an upper level proxy" +msgid "Memory cache (MB):" msgstr "" msgid "Filesystem Size Used Avail Use% Mounted on" msgstr "" -msgid "Upper level proxy port:" -msgstr "" - -msgid "" -"Disk Cache is the amount of disk space that can be used for caching on disk." -msgstr "" - msgid "" "You can safely select \\qNo upper level proxy\\q if you don\\'t need this " "feature." msgstr "" -msgid "Proxy Port" -msgstr "" - -msgid "" -"You can use either a numeric format like \\q192.168.1.0/255.255.255.0\\q or " -"a text format like \\q.domain.net\\q" -msgstr "" - -msgid "" -"Choose the level that suit to your needs. If you don\\'t know,the Local " -"Network level is usually the most appropriate. Beware that the All level may " -"be not secure." -msgstr "" - -msgid "You have entered a port that may be useful for this service:" -msgstr "" - -msgid "Cache hierarchy" -msgstr "" - msgid "Port:" msgstr "" -msgid "" -"As an option, Squid can be configured in proxy cascading. You can add a new " -"upper level proxy by specifying its hostname and port." -msgstr "" - -msgid "Access Control" -msgstr "" - -msgid "your proxy server." -msgstr "" - -msgid "For information, here is /var/spool/squid space on disk:" -msgstr "" - -msgid "" -"The wizard collected the following parameters needed to configure your proxy:" -msgstr "" - -msgid "Memory cache (MB):" -msgstr "" - -msgid "This wizard will help you configuring your proxy server." -msgstr "" - -msgid "Proxy Cache Size" -msgstr "" - -msgid "No upper level proxy (recommended)" +msgid "Squid wizard" msgstr "" msgid "" @@ -840,629 +427,670 @@ msgid "" "need to be greater than 1024." msgstr "" -msgid "Press Next if you want to keep this value," -msgstr "" - -msgid "with the Proxy configuration." -msgstr "" - -msgid "Press back to change the value." -msgstr "" - -msgid "Grant acces on local network" +msgid "Configuring the Proxy" msgstr "" -msgid "Squid is a web caching proxy server, it allows" +msgid "Local Network - access for local network (recommended)" msgstr "" -msgid "Squid wizard" +msgid "" +"Disk Cache is the amount of disk space that can be used for caching on disk." msgstr "" -msgid "Proxy port:" +msgid "Upper level proxy hostname:" msgstr "" msgid "Disk space (MB):" msgstr "" -msgid "faster web acces for your local network." +msgid "Access Control" msgstr "" -msgid "Upper level proxy hostname:" +msgid "" +"Access will be allowed for hosts on the network. Here is the information " +"found about your current local network, you can modify it if needed." msgstr "" msgid "All - No access restriction" msgstr "" -msgid "Localhost - access restricted to this server only" -msgstr "" - -msgid "or Back to correct your choice." +msgid "Define an upper level proxy" msgstr "" -msgid "" -"Memory Cache is the amount of RAM dedicated to cache memory operations (note " -"that actual memory usage of the whole squid process is bigger)." +msgid "Cache hierarchy" msgstr "" msgid "" -"Enter the qualified hostname (like \\qcache.domain.net\\q) and the port of " -"the proxy to use." -msgstr "" - -msgid "The proxy can be configured to use different access control levels." -msgstr "" - -msgid "Authorised network:" +"Squid is a web caching proxy server, it allows faster web acces for your " +"local network." msgstr "" -msgid "Configuring Samba" -msgstr "" - -msgid "The Server Banner is incorrect" -msgstr "" - -msgid "Server Banner." -msgstr "" - -msgid "Print Server:" +msgid "You have entered a port that may be useful for this service:" msgstr "" -msgid "No Samba service has been requested" -msgstr "" +#, fuzzy +msgid "The wizard successfully configured your proxy server." +msgstr "Der Assistent hat den Klienten erfolgreich hinzugefügt." -msgid "Workgroup:" +msgid "Proxy port:" msgstr "" -msgid "Samba need to know the Windows Workgroup it will serve." +msgid "" +"Memory Cache is the amount of RAM dedicated to cache memory operations (note " +"that actual memory usage of the whole squid process is bigger)." msgstr "" -msgid "Samba can provide a common file sharing area to your Windows" +msgid "See you soon!" msgstr "" -msgid "your Samba server." +msgid "" +"Your choice can be accepted, but this will not allow you to send mail " +"outside your local network. Press next to continue, or back to enter a value." msgstr "" -msgid "workstation, and can also provide printer sharing for the printers" +msgid "Mail Server Name:" msgstr "" -msgid "workstations." +msgid "Internet Mail Gateway" msgstr "" -msgid "the Samba services of your server." +msgid "Hmmm" msgstr "" -msgid "Samba Configuration Wizard" +msgid "" +"The wizard successfully configured your Internet Mail service of your server." msgstr "" -msgid "Press Quit to exit or Back to correct your choice" +msgid "Mail Address:" msgstr "" -msgid "needed to configure Samba." +msgid "You entered an empty address for the mail gateway." msgstr "" -msgid "Server Banner:" +msgid "" +"The wizard collected the following parameters needed to configure your " +"Internet Mail Service:" msgstr "" -msgid "Enabled Samba Services" +msgid "End" msgstr "" -msgid "Enable Server Printer Sharing" +msgid "Internet Mail Configuration Wizard" msgstr "" -msgid "for workstations running non-Linux systems." +msgid "" +"Internet host names must be in the form \\qhost.domain.domaintype\\q; for " +"example, if your provider is \\qprovider.com\\q, the internet mail server is " +"usually \\qsmtp.provider.com\\q." msgstr "" -msgid "connected to your server." +msgid "Form of the Address" msgstr "" -msgid "Enable Common File Sharing Area" +msgid "" +"If you choose to configure now, you will automatically continue with the " +"POSTFIX configuration" msgstr "" -msgid "Samba allows your server to behave as a file and print server" +msgid "Sorry, you have to be root to run this wizard..." msgstr "" -msgid "Samba wizard" +msgid "Masquerade not good!" msgstr "" -msgid "The Workgroup is wrong" +msgid "There seems to be a problem... go ask to the big black man downstairs" msgstr "" -msgid "Banner:" +msgid "Outgoing Mail Address" msgstr "" -msgid "Workgroup" +msgid "" +"This should be chosen consistently with the address you use for incoming " +"mail." msgstr "" -msgid "File Sharing:" +msgid "" +"This wizard will help you configuring the Internet Mail services for your " +"network." msgstr "" -msgid "The banner is the way this server will be described in the Windows" +msgid "" +"Your server will send the outgoing through a mail gateway, that will take " +"care of the final delivery." msgstr "" -msgid "an access to outside world." +msgid "Postfix wizard" msgstr "" -msgid "Here is your current value for the external gateway (value specified" +msgid "Configuring the Internet Mail" msgstr "" -msgid "Network Address" +msgid "" +"You can select the kind of address that outgoing mail will show in the " +"\\qFrom:\\q and \\qReply-to\\q field." msgstr "" -msgid "connect to your network. It\\'s the device for the local network," +msgid "Do It" msgstr "" -msgid "The server IP address is a number identifing your server in your" +msgid "Configuring the Internet News" msgstr "" -msgid "Note about networking" +msgid "" +"If you choose to configure now, you will automatically continue with the " +"NEWS configuration" msgstr "" -msgid "Server Address" +msgid "News Server Name:" msgstr "" -msgid "External connection is a network from which the computer is" +msgid "" +"Your server will regularly poll the News Server for obtaning the latest " +"Internet News; the polling period set the intervall between two consecutive " +"polling." msgstr "" -msgid "networking services of your server." +msgid "News Server:" msgstr "" -msgid "The network address is a number identifing your network; the proposed" +msgid "" +"The news server name is the name of the host providing the Internet news to " +"your network; the name is usually provided by your provider." msgstr "" -msgid "probably not the same device used for internet access." +msgid "The polling period is not correct" msgstr "" -msgid "managing his own local network (C class network)." +msgid "Polling Period" msgstr "" -msgid "and redo the login." +msgid "News Wizard" msgstr "" -msgid "IP net address:" +msgid "" +"The wizard successfully configured your Internet News service of your server." msgstr "" -msgid "Note : the gateway IP address should be non empty if you want" +msgid "" +"This wizard will help you configuring the Internet News services for your " +"network." msgstr "" msgid "" -"Host names must be in the form \\qhost.domain.domaintype\\q; if your server" +"The wizard collected the following parameters needed to configure your " +"Internet News Service:" msgstr "" -msgid "The host name is not correct" +msgid "" +"Depending on the kind of internet connection you have, an appropriate " +"polling period can change between 6 and 24 hours." msgstr "" -msgid "Wizard Error." +msgid "Polling Interval:" msgstr "" -msgid "Computed domain Name" +msgid "The news server name is not correct" msgstr "" -msgid "This page compute the domainname; it should be invisible" +msgid "" +"Internet host names must be in the form \\qhost.domain.domaintype\\q; for " +"example, if your provider is \\qprovider.com\\q, the internet new server is " +"usually \\qnews.provider.com\\q." msgstr "" -msgid "Devices are presented with the Linux name and," +msgid "News Server" msgstr "" -msgid "Configuring your network" +msgid "Polling Period (Hours):" msgstr "" -msgid "separated by dots; the last number of the list must be zero." +msgid "Welcome to the News Wizard" msgstr "" -msgid "the basic networking services of your server." +msgid "FTP Server" msgstr "" -msgid "Choose the network device (usually a card) the server should use to" +msgid "Don't check any box if you don't want to activate your FTP Server." msgstr "" -msgid "Server Address:" +msgid "Configuring the FTP Server" msgstr "" -msgid "during the initial installation). The device (network card or modem)" +msgid "Intranet FTP Server:" msgstr "" -msgid "The hostname is the name under which your server will" +msgid "FTP Server Configuration Wizard" msgstr "" -msgid "Network addresses are a list of four numbers smaller than 256," +msgid "" +"Your server can act as a FTP Server toward your internal network (intranet) " +"and as a FTP Server for the Internet." msgstr "" -msgid "will be an Internet server, the domain name should be the name" +msgid "This wizard will help you configuring the FTP Server for your network." msgstr "" -msgid "The wizard successfully configured the basic" +msgid "" +"The wizard collected the following parameters needed to configure your FTP " +"Server" msgstr "" -msgid "connected using IP masquerading; unless you know what you are doing," +msgid "FTP wizard" msgstr "" -msgid "You should not run any other applications while running this wizard" +msgid "Enable the FTP Server for the Intranet" msgstr "" -msgid "connected using another network card or a modem." +msgid "The wizard successfully configured your Intranet/Internet FTP Server" msgstr "" -msgid "Server Name:" +msgid "Internet FTP Server:" msgstr "" -msgid "should be different from the one used for the internal network." +msgid "" +"Warning\\nYou are in dhcp, server may doesn't work with your configuration." msgstr "" -msgid "Host Name:" +msgid "Enable the FTP Server for the Intranet and for the Internet" msgstr "" -msgid "Basic Network Configuration Wizard" +msgid "Select the kind of FTP service you want to activate:" msgstr "" msgid "" -"(you can change here these values if you know exactly what you\\'re doing)" -msgstr "" - -msgid "The network address is wrong" -msgstr "" - -msgid "Server IP address:" +"The firewall can be configured to offer different levels of protection; " +"choose the level that corresponds to your needs. If you don't know, the " +"Medium level is usually the most appropriate." msgstr "" -msgid "local network are DIFFERENT from the server \\qexternal\\q connection." +msgid "" +"The wizard collected the following parameters needed to configure your " +"firewall:" msgstr "" -msgid "and maybe on the Internet (depending of your upstream configuration)." +msgid "Protecion Level:" msgstr "" -msgid "any valid name is OK, like \\qcompany.net\\q." +msgid "Firewall Network Device" msgstr "" -msgid "The Server IP address is incorrect" +msgid "Low - Light filtering, standard services available" msgstr "" -msgid "Gateway IP:" +msgid "This wizard will help you configuring your server firewall." msgstr "" -msgid "and at the end of the wizard you should exit your session" +msgid "None - No protection" msgstr "" -msgid "be known from the other workstations in your network" +msgid "Configuring the Firewall" msgstr "" -msgid "client (Internet or upstream network)," +msgid "This Wizard need to run as root" msgstr "" -msgid "So, it\\'s very probable that domain name and IP adresses for this" +msgid "" +"The firewall protects your internal network from unauthorized accesses from " +"the Internet." msgstr "" -msgid "needed to configure your network" +msgid "The device name is not correct" msgstr "" -msgid "The wizard collected the following parameters" +msgid "Exit" msgstr "" -msgid "Server Wizard" +msgid "Protection Level" msgstr "" -msgid "value is designed for a configuration not connected to Internet, or" +msgid "Medium - web, ftp and ssh shown to outside" msgstr "" -msgid "External gateway" -msgstr "" +#, fuzzy +msgid "The wizard successfully configured your server firewall." +msgstr "Der Assistent hat den Klienten erfolgreich hinzugefügt." -msgid "network; the proposed value designed for a private network , with no" +msgid "Firewall wizard" msgstr "" -msgid "know what you are doing, accept the default value." +msgid "" +"The firewall need to know how your server is connected to Internet; choose " +"the device you are using for the external connection." msgstr "" -msgid "internet visibility, or connected using IP masquerading; unless you" +msgid "Fix It" msgstr "" -msgid "net device" +msgid "Internet Network Device:" msgstr "" -msgid "registered with your provider. If you will only have intranet" +msgid "Firewall Configuration Wizard" msgstr "" -msgid "Gateway device:" +msgid "Something terrible happened" msgstr "" -msgid "As regards these wizards, your computer is seen as a server" +msgid "Strong - no outside visibility, users limited to web" msgstr "" -msgid "This page compute the default server address; should be invisible." +msgid "Device" msgstr "" -msgid "if known, with the card description." -msgstr "" +#, fuzzy +msgid "The wizard successfully configured the DNS services of your server." +msgstr "Der Assistent hat den Klienten erfolgreich hinzugefügt." -msgid "This wizard will set the basic networking parameter of your server." +msgid "" +"DNS (Domain Name Server) is the service that put in correspondance a machine " +"with an internet host name." msgstr "" -msgid "Warning" +msgid "" +"Your setting could be accepted, but you will not be able to identify machine " +"names outside your local network." msgstr "" -msgid "Device:" +msgid "" +"If you choose to configure now, you will automatically continue with the DNS " +"configuration" msgstr "" -msgid "accept the default value." +msgid "Primary DNS Address:" msgstr "" -msgid "Host Name" +msgid "DNS Configuration Wizard" msgstr "" -msgid "Network Address:" +msgid "Press next to leave these values empty, or back to enter a value." msgstr "" -msgid "Network Device" +msgid "You have entered an empty address for the DNS server." msgstr "" -msgid "CRI, Campus d'Orsay, Universite Paris Sud, France" +msgid "" +"DNS will allow your network to communicate with the Internet using standard " +"internet host names. In order to configure DNS, you must provide the IP " +"address of primary and secondary DNS server; usually this address are given " +"by your Internet provider." msgstr "" -msgid "University of Manchester, Manchester, England" +msgid "" +"This wizard will help you configuring the DNS services of your server. This " +"configuration will provide a local DNS service for local computers names, " +"with non-local requests forwarded to an outside DNS." msgstr "" -msgid "SCI, Universite de Limoges, France" +msgid "DNS Server Addresses" msgstr "" -msgid "(please, choose servers in your geographical area)" +msgid "Secondary DNS Address:" msgstr "" -msgid "Your server can now act has a time server for your local network." +msgid "Configuring the DNS Server" msgstr "" -msgid "If the time server is not immediately available" +msgid "" +"The wizard collected the following parameters needed to configure your DNS " +"service:" msgstr "" -msgid "University of Regina, Regina, Saskatchewan, Canada" +msgid "DNS Wizard" msgstr "" -msgid "Internet time setting (external time server)" +msgid "Configuring the DHCP Server" msgstr "" -msgid "Secondary Time Server:" +msgid "DHCP Wizard" msgstr "" -msgid "Try again" +msgid "" +"To accept these values, and configure your server, click on \\qConfigure\\q " +"or use the Back button to correct them." msgstr "" -msgid "The Chinese University of Hong Kong" +msgid "The IP range specified is not correct" msgstr "" -msgid "UNLV College of Engineering, Las Vegas, NV" +msgid "DHCP Configuration Wizard" msgstr "" -msgid "Altea (Alicante/SPAIN)" +msgid "Lowest IP Address:" msgstr "" -msgid "Press next. otherwise, press \\qback\\q to set the local time only," +msgid "Lowest IP Address:" msgstr "" -msgid "CISM, Lyon, France" +msgid "" +"The wizard collected the following parameters needed to configure your DHCP " +"service:" msgstr "" -msgid "Inet, Inc., Seoul, Korea" +msgid "This wizard will help you configuring the DHCP services of your server." msgstr "" -msgid "Scientific Center in Chernogolovka, Moscow region, Russia" +msgid "SSystem error, no configuration done." msgstr "" -msgid "Sorry, you must be root to run this wizard" -msgstr "" +#, fuzzy +msgid "The wizard successfully configured the DHCP services of your server." +msgstr "Der Assistent hat den Klienten erfolgreich hinzugefügt." msgid "" -"If you use a time server, your machine will ask to that server the correct " -"time." -msgstr "" - -msgid "The time servers are not responding. The causes could be:" -msgstr "" - -msgid "Local time setting" +"If you choose to configure now, you will automatically continue with the " +"DHCP configuration" msgstr "" -msgid "- other reasons..." +msgid "Fix it" msgstr "" -msgid "please, install ntp manually if you can," +msgid "" +"DHCP is a service that automatically assigns networking addresses to your " +"workstations." msgstr "" -msgid "WARNING" -msgstr "" +msgid "Highest IP address:" +msgstr "Höchste IP-Adresse:" -msgid "with the TIME configuration" +msgid "Range of addresses used by dhcp" msgstr "" -msgid "Fukuoka university, Fukuoka, Japan" -msgstr "" +msgid "Highest IP Address:" +msgstr "Höchste IP-Adresse:" -msgid "Swiss Fed. Inst. of Technology" +msgid "" +"Select the range of addresses assigned to the workstations by the DHCP " +"service; unless you have special needs, you can safely accept the proposed " +"values." msgstr "" -msgid "LAAS/CNRS, Toulouse, France" +msgid "IP addresses are a dotted list of four numbers smaller than 256." msgstr "" -msgid "This wizard will help you to set the time of your server," +msgid "" +"The wizard collected the following parameters needed to configure your MySQL " +"Database Server" msgstr "" -msgid "WARNING:" +msgid "MySQL Database wizard" msgstr "" -msgid "or cancel to exit this wizard." +msgid "To run your server, you first need to specify a root password" msgstr "" -msgid "Click next to install that tools," +msgid "Configuring the MySQL Database Server" msgstr "" -msgid "MIT Information Systems, Cambridge, MA" +msgid "Please type a password for the root user:" msgstr "" -msgid "Dept. Computer Science, Strathclyde University, Glasgow, Scotland" +msgid "Add" msgstr "" -msgid "Baylor College of Medicine, Houston, Tx" +msgid "Note: This user will have all permissions" msgstr "" -msgid "Penn State University, University Park, PA" +msgid "Username:" msgstr "" -msgid "University of Oslo, Norway" +msgid "" +"This wizard will help you configuring the MySQL Database Server for your " +"network." msgstr "" -msgid "- no outside network" +msgid "" +"If you choose to configure now, you will automatically continue with the " +"MySQL Database configuration" msgstr "" -msgid "Type of setting" +msgid "Password:" msgstr "" -msgid "Choose a time zone:" +msgid "Sorry, you must be root to do this..." msgstr "" -msgid "Computer Science Department, University of Wisconsin-Madison" +msgid "Confirm" msgstr "" -msgid "Testing the time servers availability" +msgid "Root Password:" msgstr "" -msgid "Canadian Meteorological Centre, Dorval, Quebec, Canada" +msgid "Database Server" msgstr "" -msgid "Press next to start the time servers test." -msgstr "" +#, fuzzy +msgid "The wizard successfully configured your MySQL Database Server" +msgstr "Der Assistent hat den Klienten erfolgreich hinzugefügt." msgid "" -"You can set the time of your machine in two ways: Locally means that the " -"setting" +"To accept this value, and configure your server, click on \\qConfirm\\q or " +"use the Back button to correct them." msgstr "" -msgid "University of Oklahoma, Norman, Oklahoma, USA" +msgid "User addition" msgstr "" -msgid "Cant install the NTP tools!" +msgid "Please enter a username and password to add a user" msgstr "" -msgid "Singapore" +msgid "MySQL Database Server" msgstr "" -msgid "Trinity College, Dublin, Ireland" +msgid "Configuration Wizard" msgstr "" -msgid "National Research Council of Canada, Ottawa, Ontario, Canada" -msgstr "" +msgid "Warning:" +msgstr "Warnung:" -msgid "Washington State University Tri-Cities, Richland, Wa" -msgstr "" +msgid "Client wizard" +msgstr "Klienten Assistent" -msgid "University of Adelaide, South Australia" +msgid "Client IP:" msgstr "" -msgid "CRIUC, Universite de Caen, France" +msgid "You need to be root to run this wizard" msgstr "" msgid "" -"will simply set the system clock, without synchronizing with the external " -"world" -msgstr "" - -msgid "- non existant time servers" -msgstr "" - -msgid "back to return," -msgstr "" - -msgid "Loria, Nancy, France" -msgstr "" - -msgid "If you want to continue (and you know what you are doing)" -msgstr "" - -msgid "Time Servers" -msgstr "" - -msgid "(network or other reason), you will wait about 30 seconds" -msgstr "" - -msgid "either locally or synchronized with an external time server." -msgstr "" - -msgid "Save config without test" +"Press next to configure these parameters now, or Cancel to exit this wizard." msgstr "" -msgid "Select a primary and secondary server from the list, or specify one:" +msgid "" +"To accept these values, and add your client, click on \\qConfigure\\q or use " +"the Back button to correct them." msgstr "" -msgid "or insert the CDROM containing it" +msgid "Press next to begin, or Cancel to leave this wizard." msgstr "" -msgid "No network have been detected." +msgid "This wizard will help you in adding a new client in your local DNS." msgstr "" -msgid "or save configuration without actually setting time." +msgid "Network not configured yet" msgstr "" -msgid "You can try again to contact time servers," +msgid "Quit" msgstr "" -msgid "Which kind of setting would you like to do?" -msgstr "" +#, fuzzy +msgid "IP number of the machine:" +msgstr "IP des Rechners:" -msgid "Thus your server will be the local time server for your network." +msgid "" +"Your client on the network will be identified by name, as in clientname." +"company.net. Every machine on the network must have a (unique) IP address, " +"in the usual dotted syntax." msgstr "" -msgid "Primary Time Server:" +msgid "" +"Note that the given IP number and client name should be unique in the " +"network." msgstr "" -msgid "WARNING: the net time tool arent there." +msgid "" +"You have to configure the basic network parameters before launch this wizard." msgstr "" -msgid "Time server configuration saved" -msgstr "" +msgid "OK" +msgstr "OK" -msgid "Time configuration wizard" -msgstr "" +#, fuzzy +msgid "Name of the machine:" +msgstr "Rechnername:" -msgid "press next to begin, or cancel to leave this wizard" -msgstr "" +msgid "The wizard successfully added the client." +msgstr "Der Assistent hat den Klienten erfolgreich hinzugefügt." -msgid "Intranet Web Server:" +msgid "You have entered a machine name or an IP number already used." msgstr "" -msgid "Intranet/Internet Web Server" +msgid "" +"The server will use the informations you enter here to make the name of the " +"client available to other machines into your network." msgstr "" -msgid "Enable the Web Server for the Intranet" +msgid "" +"If you choose to configure now, you will automatically continue with the " +"Client configuration" msgstr "" -msgid "Internet Web Server:" -msgstr "" +msgid "(you don't need to type the domain after the name)" +msgstr "(Sie müssen die Domäne nach dem Rechnernamen nicht angeben)" -msgid "Configuring the Web Server" +msgid "Client identification:" msgstr "" -msgid "network (intranet) and as a Web Server for the Internet." +msgid "Configure" msgstr "" -msgid "Web Server" -msgstr "" +msgid "Adding a new client to your network" +msgstr "Einen neuen Klienten in Ihr Netzwerk aufnehmen" -msgid "Enable the Web Server for the Intranet and for the Internet" +msgid "Client name" msgstr "" -msgid "Web wizard" +msgid "System error, no configuration done" msgstr "" -msgid "Your server can act as a Web Server toward your internal" +msgid "" +"The wizard collected the following parameters needed to add a client to your " +"network:" msgstr "" -msgid "needed to configure your Web Server" -msgstr "" +msgid "DNS Client Wizard" +msgstr "DNS-Klienten Assistent" -msgid "the Web Server for your network." +msgid "Congratulations" msgstr "" -msgid "Don't check any box if you don't want to activate your Web Server." +msgid "" +"Press next if you want to change the already existing value, or back to " +"correct your choice." msgstr "" -msgid "Select the kind of Web service you want to activate:" +msgid "This is not a valid address... press next to continue" msgstr "" -msgid "Web Server Configuration Wizard" +msgid "" +"A client of your local network is a machine connected to the network having " +"its own name and IP number." msgstr "" |