#! /bin/sh # Guess values for system-dependent variables and create Makefiles. # Generated automatically using autoconf version 2.13 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. # Defaults: ac_help= ac_default_prefix=/usr/local # Any additions from configure.in: ac_default_prefix=${KDEDIR:-/usr/local/kde} ac_help="$ac_help --disable-fast-perl disable fast Makefile generation (needs perl)" ac_help="$ac_help --enable-debug enables debug symbols [default=no]" ac_help="$ac_help --disable-debug disables debug output and debug symbols [default=no]" ac_help="$ac_help --enable-strict compiles with strict compiler options (may not work!)" ac_help="$ac_help --enable-profile creates profiling infos [default=no]" ac_help="$ac_help --enable-final build size optimized apps (experimental - needs lots of memory)" ac_help="$ac_help --disable-closure don't delay template instantiation" ac_help="$ac_help --enable-shared[=PKGS] build shared libraries [default=yes]" ac_help="$ac_help --enable-static[=PKGS] build static libraries [default=no]" ac_help="$ac_help --enable-fast-install[=PKGS] optimize for fast installation [default=yes]" ac_help="$ac_help --with-gnu-ld assume the C compiler uses GNU ld [default=no]" ac_help="$ac_help --disable-libtool-lock avoid locking (might break parallel builds)" ac_help="$ac_help --with-pic try to use only PIC/non-PIC objects [default=use both]" ac_help="$ac_help --with-xinerama enable support for Xinerama " ac_help="$ac_help --enable-mt link to threaded Qt (experimental)" ac_help="$ac_help --with-extra-includes=DIR adds non standard include paths" ac_help="$ac_help --with-extra-libs=DIR adds non standard library paths" ac_help="$ac_help --with-qt-dir=DIR where the root of Qt is installed " ac_help="$ac_help --with-qt-includes=DIR where the Qt includes are. " ac_help="$ac_help --with-qt-libraries=DIR where the Qt library is installed." ac_help="$ac_help --disable-rpath do not use the rpath feature of ld" ac_help="$ac_help --disable-path-check don't try to find out, where to install" # Initialize some variables set by options. # The variables have the same names as the options, with # dashes changed to underlines. build=NONE cache_file=./config.cache exec_prefix=NONE host=NONE no_create= nonopt=NONE no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= target=NONE verbose= x_includes=NONE x_libraries=NONE bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datadir='${prefix}/share' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' libdir='${exec_prefix}/lib' includedir='${prefix}/include' oldincludedir='/usr/include' infodir='${prefix}/info' mandir='${prefix}/man' # Initialize some other variables. subdirs= MFLAGS= MAKEFLAGS= SHELL=${CONFIG_SHELL-/bin/sh} # Maximum number of lines to put in a shell here document. ac_max_here_lines=12 ac_prev= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval "$ac_prev=\$ac_option" ac_prev= continue fi case "$ac_option" in -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; *) ac_optarg= ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. case "$ac_option" in -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir="$ac_optarg" ;; -build | --build | --buil | --bui | --bu) ac_prev=build ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build="$ac_optarg" ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file="$ac_optarg" ;; -datadir | --datadir | --datadi | --datad | --data | --dat | --da) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ | --da=*) datadir="$ac_optarg" ;; -disable-* | --disable-*) ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } fi ac_feature=`echo $ac_feature| sed 's/-/_/g'` eval "enable_${ac_feature}=no" ;; -enable-* | --enable-*) ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } fi ac_feature=`echo $ac_feature| sed 's/-/_/g'` case "$ac_option" in *=*) ;; *) ac_optarg=yes ;; esac eval "enable_${ac_feature}='$ac_optarg'" ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix="$ac_optarg" ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he) # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat << EOF Usage: configure [options] [host] Options: [defaults in brackets after descriptions] Configuration: --cache-file=FILE cache test results in FILE --help print this message --no-create do not create output files --quiet, --silent do not print \`checking...' messages --version print the version of autoconf that created configure Directory and file names: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [same as prefix] --bindir=DIR user executables in DIR [EPREFIX/bin] --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] --libexecdir=DIR program executables in DIR [EPREFIX/libexec] --datadir=DIR read-only architecture-independent data in DIR [PREFIX/share] --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data in DIR [PREFIX/com] --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] --libdir=DIR object code libraries in DIR [EPREFIX/lib] --includedir=DIR C header files in DIR [PREFIX/include] --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] --infodir=DIR info documentation in DIR [PREFIX/info] --mandir=DIR man documentation in DIR [PREFIX/man] --srcdir=DIR find the sources in DIR [configure dir or ..] --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names EOF cat << EOF Host type: --build=BUILD configure for building on BUILD [BUILD=HOST] --host=HOST configure for HOST [guessed] --target=TARGET configure for TARGET [TARGET=HOST] Features and packages: --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --x-includes=DIR X include files are in DIR --x-libraries=DIR X library files are in DIR EOF if test -n "$ac_help"; then echo "--enable and --with options recognized:$ac_help" fi exit 0 ;; -host | --host | --hos | --ho) ac_prev=host ;; -host=* | --host=* | --hos=* | --ho=*) host="$ac_optarg" ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir="$ac_optarg" ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir="$ac_optarg" ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir="$ac_optarg" ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir="$ac_optarg" ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst \ | --locals | --local | --loca | --loc | --lo) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* \ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) localstatedir="$ac_optarg" ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir="$ac_optarg" ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir="$ac_optarg" ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix="$ac_optarg" ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix="$ac_optarg" ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix="$ac_optarg" ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name="$ac_optarg" ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir="$ac_optarg" ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir="$ac_optarg" ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site="$ac_optarg" ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir="$ac_optarg" ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir="$ac_optarg" ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target="$ac_optarg" ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers) echo "configure generated by autoconf version 2.13" exit 0 ;; -with-* | --with-*) ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } fi ac_package=`echo $ac_package| sed 's/-/_/g'` case "$ac_option" in *=*) ;; *) ac_optarg=yes ;; esac eval "with_${ac_package}='$ac_optarg'" ;; -without-* | --without-*) ac_package=`echo $ac_option|sed -e 's/-*without-//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } fi ac_package=`echo $ac_package| sed 's/-/_/g'` eval "with_${ac_package}=no" ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes="$ac_optarg" ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries="$ac_optarg" ;; -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } ;; *) if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then echo "configure: warning: $ac_option: invalid host type" 1>&2 fi if test "x$nonopt" != xNONE; then { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } fi nonopt="$ac_option" ;; esac done if test -n "$ac_prev"; then { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } fi trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 # File descriptor usage: # 0 standard input # 1 file creation # 2 errors and warnings # 3 some systems may open it to /dev/tty # 4 used on the Kubota Titan # 6 checking for... messages and results # 5 compiler messages saved in config.log if test "$silent" = yes; then exec 6>/dev/null else exec 6>&1 fi exec 5>./config.log echo "\ This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. " 1>&5 # Strip out --no-create and --no-recursion so they do not pile up. # Also quote any args containing shell metacharacters. ac_configure_args= for ac_arg do case "$ac_arg" in -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c) ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) ac_configure_args="$ac_configure_args '$ac_arg'" ;; *) ac_configure_args="$ac_configure_args $ac_arg" ;; esac done # NLS nuisances. # Only set these to C if already set. These must not be set unconditionally # because not all systems understand e.g. LANG=C (notably SCO). # Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! # Non-C LC_CTYPE values break the ctype check. if test "${LANG+set}" = set; then LANG=C; export LANG; fi if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -rf conftest* confdefs.h # AIX cpp loses on an empty file, so make sure it contains at least a newline. echo > confdefs.h # A filename unique to this package, relative to the directory that # configure is in, which we can look for to find out if srcdir is correct. ac_unique_file=acinclude.m4 # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then its parent. ac_prog=$0 ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. srcdir=$ac_confdir if test ! -r $srcdir/$ac_unique_file; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r $srcdir/$ac_unique_file; then if test "$ac_srcdir_defaulted" = yes; then { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } else { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } fi fi srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. if test -z "$CONFIG_SITE"; then if test "x$prefix" != xNONE; then CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" else CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" fi fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then echo "loading site script $ac_site_file" . "$ac_site_file" fi done if test -r "$cache_file"; then echo "loading cache $cache_file" . $cache_file else echo "creating cache $cache_file" > $cache_file fi ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross ac_exeext= ac_objext=o if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then ac_n= ac_c=' ' ac_t=' ' else ac_n=-n ac_c= ac_t= fi else ac_n= ac_c='\c' ac_t= fi ac_aux_dir= for ac_dir in admin $srcdir/admin; do if test -f $ac_dir/install-sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break elif test -f $ac_dir/install.sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break fi done if test -z "$ac_aux_dir"; then { echo "configure: error: can not find install-sh or install.sh in admin $srcdir/admin" 1>&2; exit 1; } fi ac_config_guess=$ac_aux_dir/config.guess ac_config_sub=$ac_aux_dir/config.sub ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. unset CDPATH # Do some error checking and defaulting for the host and target type. # The inputs are: # configure --host=HOST --target=TARGET --build=BUILD NONOPT # # The rules are: # 1. You are not allowed to specify --host, --target, and nonopt at the # same time. # 2. Host defaults to nonopt. # 3. If nonopt is not specified, then host defaults to the current host, # as determined by config.guess. # 4. Target and build default to nonopt. # 5. If nonopt is not specified, then target and build default to host. # The aliases save the names the user supplied, while $host etc. # will get canonicalized. case $host---$target---$nonopt in NONE---*---* | *---NONE---* | *---*---NONE) ;; *) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;; esac # Make sure we can run config.sub. if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then : else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 echo "configure:621: checking host system type" >&5 host_alias=$host case "$host_alias" in NONE) case $nonopt in NONE) if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then : else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } fi ;; *) host_alias=$nonopt ;; esac ;; esac host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias` host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 echo "configure:642: checking target system type" >&5 target_alias=$target case "$target_alias" in NONE) case $nonopt in NONE) target_alias=$host_alias ;; *) target_alias=$nonopt ;; esac ;; esac target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias` target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 echo "configure:660: checking build system type" >&5 build_alias=$build case "$build_alias" in NONE) case $nonopt in NONE) build_alias=$host_alias ;; *) build_alias=$nonopt ;; esac ;; esac build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias` build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$build" 1>&6 test "$host_alias" != "$target_alias" && test "$program_prefix$program_suffix$program_transform_name" = \ NONENONEs,x,x, && program_prefix=${target_alias}- if test "$program_transform_name" = s,x,x,; then program_transform_name= else # Double any \ or $. echo might interpret backslashes. cat <<\EOF_SED > conftestsed s,\\,\\\\,g; s,\$,$$,g EOF_SED program_transform_name="`echo $program_transform_name|sed -f conftestsed`" rm -f conftestsed fi test "$program_prefix" != NONE && program_transform_name="s,^,${program_prefix},; $program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && program_transform_name="s,\$\$,${program_suffix},; $program_transform_name" # sed with no file args requires a program. test "$program_transform_name" = "" && program_transform_name="s,x,x," test -n "$INSTALL" && kde_save_INSTALL_given=$INSTALL test -n "$INSTALL_PROGRAM" && kde_save_INSTALL_PROGRAM_given=$INSTALL_PROGRAM test -n "$INSTALL_SCRIPT" && kde_save_INSTALL_SCRIPT_given=$INSTALL_SCRIPT # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 echo "configure:719: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" for ac_dir in $PATH; do # Account for people who put trailing slashes in PATH elements. case "$ac_dir/" in /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do if test -f $ac_dir/$ac_prog; then if test $ac_prog = install && grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : else ac_cv_path_install="$ac_dir/$ac_prog -c" break 2 fi fi done ;; esac done IFS="$ac_save_IFS" fi if test "${ac_cv_path_install+set}" = set; then INSTALL="$ac_cv_path_install" else # As a last resort, use the slow shell script. We don't cache a # path for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the path is relative. INSTALL="$ac_install_sh" fi fi echo "$ac_t""$INSTALL" 1>&6 # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' if test -z "$kde_save_INSTALL_given" ; then # OK, user hasn't given any INSTALL, autoconf found one for us # now we test, if it supports the -p flag echo $ac_n "checking for -p flag to install""... $ac_c" 1>&6 echo "configure:776: checking for -p flag to install" >&5 rm -f confinst.$$.* > /dev/null 2>&1 echo "Testtest" > confinst.$$.orig ac_res=no if ${INSTALL} -p confinst.$$.orig confinst.$$.new > /dev/null 2>&1 ; then if test -f confinst.$$.new ; then # OK, -p seems to do no harm to install INSTALL="${INSTALL} -p" ac_res=yes fi fi rm -f confinst.$$.* echo "$ac_t""$ac_res" 1>&6 fi if test -z "$kde_save_INSTALL_PROGRAM_given" ; then INSTALL_PROGRAM='${INSTALL} $(INSTALL_STRIP_FLAG)' fi if test -z "$kde_save_INSTALL_SCRIPT_given" ; then INSTALL_SCRIPT='${INSTALL}' fi echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 echo "configure:799: checking whether build environment is sane" >&5 # Just in case sleep 1 echo timestamp > conftestfile # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` if test "$*" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftestfile` fi if test "$*" != "X $srcdir/configure conftestfile" \ && test "$*" != "X conftestfile $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". { echo "configure: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" 1>&2; exit 1; } fi test "$2" = conftestfile ) then # Ok. : else { echo "configure: error: newly created file is older than distributed files! Check your system clock" 1>&2; exit 1; } fi rm -f conftest* echo "$ac_t""yes" 1>&6 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 echo "configure:837: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftestmake <<\EOF all: @echo 'ac_maketemp="${MAKE}"' EOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=` if test -n "$ac_maketemp"; then eval ac_cv_prog_make_${ac_make}_set=yes else eval ac_cv_prog_make_${ac_make}_set=no fi rm -f conftestmake fi if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then echo "$ac_t""yes" 1>&6 SET_MAKE= else echo "$ac_t""no" 1>&6 SET_MAKE="MAKE=${MAKE-make}" fi PACKAGE=krootwarning VERSION=0.1 if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; } fi cat >> confdefs.h <> confdefs.h <&6 echo "configure:883: checking for working aclocal" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. if (aclocal --version) < /dev/null > /dev/null 2>&1; then ACLOCAL=aclocal echo "$ac_t""found" 1>&6 else ACLOCAL="$missing_dir/missing aclocal" echo "$ac_t""missing" 1>&6 fi echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 echo "configure:896: checking for working autoconf" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. if (autoconf --version) < /dev/null > /dev/null 2>&1; then AUTOCONF=autoconf echo "$ac_t""found" 1>&6 else AUTOCONF="$missing_dir/missing autoconf" echo "$ac_t""missing" 1>&6 fi echo $ac_n "checking for working automake""... $ac_c" 1>&6 echo "configure:909: checking for working automake" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. if (automake --version) < /dev/null > /dev/null 2>&1; then AUTOMAKE=automake echo "$ac_t""found" 1>&6 else AUTOMAKE="$missing_dir/missing automake" echo "$ac_t""missing" 1>&6 fi echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 echo "configure:922: checking for working autoheader" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. if (autoheader --version) < /dev/null > /dev/null 2>&1; then AUTOHEADER=autoheader echo "$ac_t""found" 1>&6 else AUTOHEADER="$missing_dir/missing autoheader" echo "$ac_t""missing" 1>&6 fi echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 echo "configure:935: checking for working makeinfo" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. if (makeinfo --version) < /dev/null > /dev/null 2>&1; then MAKEINFO=makeinfo echo "$ac_t""found" 1>&6 else MAKEINFO="$missing_dir/missing makeinfo" echo "$ac_t""missing" 1>&6 fi unset CDPATH if test "x$prefix" = "xNONE"; then prefix=$ac_default_prefix ac_configure_args="$ac_configure_args --prefix $prefix" fi # Check whether --enable-fast-perl or --disable-fast-perl was given. if test "${enable_fast_perl+set}" = set; then enableval="$enable_fast_perl" with_fast_perl=$enableval else with_fast_perl=yes fi val= if test -f $srcdir/configure.files ; then val=`sed -e 's%^%\$(top_srcdir)/%' $srcdir/configure.files` fi CONF_FILES= if test -n "$val" ; then for i in $val ; do CONF_FILES="$CONF_FILES $i" done fi # Check whether --enable-debug or --disable-debug was given. if test "${enable_debug+set}" = set; then enableval="$enable_debug" if test $enableval = "no"; then kde_use_debug_code="no" kde_use_debug_define=yes else kde_use_debug_code="yes" kde_use_debug_define=no fi else kde_use_debug_code="no" kde_use_debug_define=no fi # Check whether --enable-dummyoption or --disable-dummyoption was given. if test "${enable_dummyoption+set}" = set; then enableval="$enable_dummyoption" : fi # Check whether --enable-strict or --disable-strict was given. if test "${enable_strict+set}" = set; then enableval="$enable_strict" if test $enableval = "no"; then kde_use_strict_options="no" else kde_use_strict_options="yes" fi else kde_use_strict_options="no" fi # Check whether --enable-profile or --disable-profile was given. if test "${enable_profile+set}" = set; then enableval="$enable_profile" kde_use_profiling=$enableval else kde_use_profiling="no" fi CFLAGS=" $CFLAGS" # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:1041: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="gcc" break fi done IFS="$ac_save_ifs" fi fi CC="$ac_cv_prog_CC" if test -n "$CC"; then echo "$ac_t""$CC" 1>&6 else echo "$ac_t""no" 1>&6 fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:1071: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_prog_rejected=no ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" break fi done IFS="$ac_save_ifs" if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# -gt 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift set dummy "$ac_dir/$ac_word" "$@" shift ac_cv_prog_CC="$@" fi fi fi fi CC="$ac_cv_prog_CC" if test -n "$CC"; then echo "$ac_t""$CC" 1>&6 else echo "$ac_t""no" 1>&6 fi if test -z "$CC"; then case "`uname -s`" in *win32* | *WIN32*) # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:1122: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="cl" break fi done IFS="$ac_save_ifs" fi fi CC="$ac_cv_prog_CC" if test -n "$CC"; then echo "$ac_t""$CC" 1>&6 else echo "$ac_t""no" 1>&6 fi ;; esac fi test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 echo "configure:1154: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF #line 1165 "configure" #include "confdefs.h" main(){return(0);} EOF if { (eval echo configure:1170: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then ac_cv_prog_cc_cross=no else ac_cv_prog_cc_cross=yes fi else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_cv_prog_cc_works=no fi rm -fr conftest* ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 echo "configure:1196: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 echo "configure:1201: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no fi fi echo "$ac_t""$ac_cv_prog_gcc" 1>&6 if test $ac_cv_prog_gcc = yes; then GCC=yes else GCC= fi ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 echo "configure:1229: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else echo 'void f(){}' > conftest.c if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then ac_cv_prog_cc_g=yes else ac_cv_prog_cc_g=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 if test "$ac_test_CFLAGS" = set; then CFLAGS="$ac_save_CFLAGS" elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi if test "$GCC" = "yes"; then if test "$kde_use_debug_code" = "yes"; then CFLAGS="-g -O2 $CFLAGS" case $host in *-*-linux-gnu) CFLAGS="-ansi -W -Wall -pedantic -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE $CFLAGS" ;; esac else CFLAGS="-O2 $CFLAGS" fi fi if test "$kde_use_debug_define" = "yes"; then CFLAGS="-DNDEBUG $CFLAGS" fi case "$host" in *-*-sysv4.2uw*) CFLAGS="-D_UNIXWARE $CFLAGS";; *-*-sysv5uw7*) CFLAGS="-D_UNIXWARE7 $CFLAGS";; esac if test -z "$LDFLAGS" && test "$kde_use_debug_code" = "no" && test "$GCC" = "yes"; then LDFLAGS="" fi CXXFLAGS=" $CXXFLAGS" for ac_prog in $CCC c++ g++ gcc CC cxx cc++ cl do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:1294: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CXX"; then ac_cv_prog_CXX="$CXX" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CXX="$ac_prog" break fi done IFS="$ac_save_ifs" fi fi CXX="$ac_cv_prog_CXX" if test -n "$CXX"; then echo "$ac_t""$CXX" 1>&6 else echo "$ac_t""no" 1>&6 fi test -n "$CXX" && break done test -n "$CXX" || CXX="gcc" echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6 echo "configure:1326: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5 ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cxx_cross ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cat > conftest.$ac_ext << EOF #line 1342 "configure" #include "confdefs.h" int main(){return(0);} EOF if { (eval echo configure:1347: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cxx_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then ac_cv_prog_cxx_cross=no else ac_cv_prog_cxx_cross=yes fi else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_cv_prog_cxx_works=no fi rm -fr conftest* ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross echo "$ac_t""$ac_cv_prog_cxx_works" 1>&6 if test $ac_cv_prog_cxx_works = no; then { echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 echo "configure:1373: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6 cross_compiling=$ac_cv_prog_cxx_cross echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6 echo "configure:1378: checking whether we are using GNU C++" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.C <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gxx=yes else ac_cv_prog_gxx=no fi fi echo "$ac_t""$ac_cv_prog_gxx" 1>&6 if test $ac_cv_prog_gxx = yes; then GXX=yes else GXX= fi ac_test_CXXFLAGS="${CXXFLAGS+set}" ac_save_CXXFLAGS="$CXXFLAGS" CXXFLAGS= echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6 echo "configure:1406: checking whether ${CXX-g++} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else echo 'void f(){}' > conftest.cc if test -z "`${CXX-g++} -g -c conftest.cc 2>&1`"; then ac_cv_prog_cxx_g=yes else ac_cv_prog_cxx_g=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_prog_cxx_g" 1>&6 if test "$ac_test_CXXFLAGS" = set; then CXXFLAGS="$ac_save_CXXFLAGS" elif test $ac_cv_prog_cxx_g = yes; then if test "$GXX" = yes; then CXXFLAGS="-g -O2" else CXXFLAGS="-g" fi else if test "$GXX" = yes; then CXXFLAGS="-O2" else CXXFLAGS= fi fi if test "$GXX" = "yes"; then if test "$kde_use_debug_code" = "yes"; then CXXFLAGS="-g -O2 -Wall -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings $CXXFLAGS" echo $ac_n "checking whether $CXX supports -Wno-long-long""... $ac_c" 1>&6 echo "configure:1444: checking whether $CXX supports -Wno-long-long" >&5 kde_cache=`echo Wno-long-long | sed 'y%.=/+-%___p_%'` if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else echo 'int main() { return 0; }' >conftest.cc eval "kde_cv_prog_cxx_$kde_cache=no" if test -z "`$CXX -Wno-long-long -c conftest.cc 2>&1`"; then if test -z "`$CXX -Wno-long-long -o conftest conftest.o 2>&1`"; then eval "kde_cv_prog_cxx_$kde_cache=yes" fi fi rm -f conftest* fi if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then echo "$ac_t""yes" 1>&6 : CXXFLAGS="-Wno-long-long $CXXFLAGS" else echo "$ac_t""no" 1>&6 : fi echo $ac_n "checking whether $CXX supports -Wnon-virtual-dtor""... $ac_c" 1>&6 echo "configure:1473: checking whether $CXX supports -Wnon-virtual-dtor" >&5 kde_cache=`echo Wnon-virtual-dtor | sed 'y%.=/+-%___p_%'` if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else echo 'int main() { return 0; }' >conftest.cc eval "kde_cv_prog_cxx_$kde_cache=no" if test -z "`$CXX -Wnon-virtual-dtor -c conftest.cc 2>&1`"; then if test -z "`$CXX -Wnon-virtual-dtor -o conftest conftest.o 2>&1`"; then eval "kde_cv_prog_cxx_$kde_cache=yes" fi fi rm -f conftest* fi if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then echo "$ac_t""yes" 1>&6 : CXXFLAGS="-Wnon-virtual-dtor $CXXFLAGS" else echo "$ac_t""no" 1>&6 : fi echo $ac_n "checking whether $CXX supports -fno-builtin""... $ac_c" 1>&6 echo "configure:1502: checking whether $CXX supports -fno-builtin" >&5 kde_cache=`echo fno-builtin | sed 'y%.=/+-%___p_%'` if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else echo 'int main() { return 0; }' >conftest.cc eval "kde_cv_prog_cxx_$kde_cache=no" if test -z "`$CXX -fno-builtin -c conftest.cc 2>&1`"; then if test -z "`$CXX -fno-builtin -o conftest conftest.o 2>&1`"; then eval "kde_cv_prog_cxx_$kde_cache=yes" fi fi rm -f conftest* fi if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then echo "$ac_t""yes" 1>&6 : CXXFLAGS="-fno-builtin $CXXFLAGS" else echo "$ac_t""no" 1>&6 : fi case $host in *-*-linux-gnu) CXXFLAGS="-ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wbad-function-cast -Wcast-align -Wundef -Wconversion $CXXFLAGS" ;; esac if test "$kde_use_strict_options" = "yes"; then CXXFLAGS="-Wcast-qual -Wbad-function-cast -Wshadow -Wcast-align $CXXFLAGS" fi if test "$kde_very_strict" = "yes"; then CXXFLAGS="-Wold-style-cast -Wredundant-decls -Wconversion $CXXFLAGS" fi else CXXFLAGS="-O2 $CXXFLAGS" fi fi if test "$kde_use_debug_define" = "yes"; then CXXFLAGS="-DNDEBUG $CXXFLAGS" fi if test "$kde_use_profiling" = "yes"; then echo $ac_n "checking whether $CXX supports -pg""... $ac_c" 1>&6 echo "configure:1554: checking whether $CXX supports -pg" >&5 kde_cache=`echo pg | sed 'y%.=/+-%___p_%'` if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else echo 'int main() { return 0; }' >conftest.cc eval "kde_cv_prog_cxx_$kde_cache=no" if test -z "`$CXX -pg -c conftest.cc 2>&1`"; then if test -z "`$CXX -pg -o conftest conftest.o 2>&1`"; then eval "kde_cv_prog_cxx_$kde_cache=yes" fi fi rm -f conftest* fi if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then echo "$ac_t""yes" 1>&6 : CFLAGS="-pg $CFLAGS" CXXFLAGS="-pg $CXXFLAGS" else echo "$ac_t""no" 1>&6 : fi fi echo $ac_n "checking whether $CXX supports -fno-exceptions""... $ac_c" 1>&6 echo "configure:1588: checking whether $CXX supports -fno-exceptions" >&5 kde_cache=`echo fno-exceptions | sed 'y%.=/+-%___p_%'` if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else echo 'int main() { return 0; }' >conftest.cc eval "kde_cv_prog_cxx_$kde_cache=no" if test -z "`$CXX -fno-exceptions -c conftest.cc 2>&1`"; then if test -z "`$CXX -fno-exceptions -o conftest conftest.o 2>&1`"; then eval "kde_cv_prog_cxx_$kde_cache=yes" fi fi rm -f conftest* fi if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then echo "$ac_t""yes" 1>&6 : CXXFLAGS="$CXXFLAGS -fno-exceptions" else echo "$ac_t""no" 1>&6 : fi echo $ac_n "checking whether $CXX supports -fno-check-new""... $ac_c" 1>&6 echo "configure:1617: checking whether $CXX supports -fno-check-new" >&5 kde_cache=`echo fno-check-new | sed 'y%.=/+-%___p_%'` if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else echo 'int main() { return 0; }' >conftest.cc eval "kde_cv_prog_cxx_$kde_cache=no" if test -z "`$CXX -fno-check-new -c conftest.cc 2>&1`"; then if test -z "`$CXX -fno-check-new -o conftest conftest.o 2>&1`"; then eval "kde_cv_prog_cxx_$kde_cache=yes" fi fi rm -f conftest* fi if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then echo "$ac_t""yes" 1>&6 : CXXFLAGS="$CXXFLAGS -fno-check-new" else echo "$ac_t""no" 1>&6 : fi echo $ac_n "checking whether $CXX supports -fexceptions""... $ac_c" 1>&6 echo "configure:1646: checking whether $CXX supports -fexceptions" >&5 kde_cache=`echo fexceptions | sed 'y%.=/+-%___p_%'` if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else echo 'int main() { return 0; }' >conftest.cc eval "kde_cv_prog_cxx_$kde_cache=no" if test -z "`$CXX -fexceptions -c conftest.cc 2>&1`"; then if test -z "`$CXX -fexceptions -o conftest conftest.o 2>&1`"; then eval "kde_cv_prog_cxx_$kde_cache=yes" fi fi rm -f conftest* fi if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then echo "$ac_t""yes" 1>&6 : USE_EXCEPTIONS="-fexceptions" else echo "$ac_t""no" 1>&6 : USE_EXCEPTIONS= fi USE_RTTI= case "$host" in *-*-irix*) test "$GXX" = yes && CXXFLAGS="-D_LANGUAGE_C_PLUS_PLUS -D__LANGUAGE_C_PLUS_PLUS $CXXFLAGS" ;; *-*-sysv4.2uw*) CXXFLAGS="-D_UNIXWARE $CXXFLAGS";; *-*-sysv5uw7*) CXXFLAGS="-D_UNIXWARE7 $CXXFLAGS";; *-*-solaris*) if test "$GXX" = yes; then libstdcpp=`$CXX -print-file-name=libstdc++.so` if test ! -f $libstdcpp; then { echo "configure: error: You've compiled gcc without --enable-shared. This doesn't work with KDE. Please recompile gcc with --enable-shared to receive a libstdc++.so" 1>&2; exit 1; } fi fi ;; esac __val=$CXX __forbid=" -fno-rtti -rpath " if test -n "$__val"; then __new="" ac_save_IFS=$IFS IFS=" " for i in $__val; do case "$__forbid" in *" $i "*) echo "configure: warning: found forbidden $i in CXX, removing it" 1>&2 ;; *) # Careful to not add spaces, where there were none, because otherwise # libtool gets confused, if we change e.g. CXX if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;; esac done IFS=$ac_save_IFS CXX=$__new fi __val=$CXXFLAGS __forbid=" -fno-rtti -rpath " if test -n "$__val"; then __new="" ac_save_IFS=$IFS IFS=" " for i in $__val; do case "$__forbid" in *" $i "*) echo "configure: warning: found forbidden $i in CXXFLAGS, removing it" 1>&2 ;; *) # Careful to not add spaces, where there were none, because otherwise # libtool gets confused, if we change e.g. CXX if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;; esac done IFS=$ac_save_IFS CXXFLAGS=$__new fi echo $ac_n "checking how to run the C++ preprocessor""... $ac_c" 1>&6 echo "configure:1730: checking how to run the C++ preprocessor" >&5 if test -z "$CXXCPP"; then if eval "test \"`echo '$''{'ac_cv_prog_CXXCPP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cxx_cross ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' CXXCPP="${CXX-g++} -E" cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:1751: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* CXXCPP=/lib/cpp fi rm -f conftest* ac_cv_prog_CXXCPP="$CXXCPP" ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross fi fi CXXCPP="$ac_cv_prog_CXXCPP" echo "$ac_t""$CXXCPP" 1>&6 # the following is to allow programs, that are known to # have problems when compiled with -O2 if test -n "$CXXFLAGS"; then kde_safe_IFS=$IFS IFS=" " NOOPT_CXXFLAGS="" for i in $CXXFLAGS; do case $i in -O*) ;; *) NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS $i" ;; esac done IFS=$kde_safe_IFS fi # Check whether --enable-final or --disable-final was given. if test "${enable_final+set}" = set; then enableval="$enable_final" kde_use_final=$enableval else kde_use_final=no fi REPO="" NOREPO="" echo $ac_n "checking whether $CXX supports -frepo""... $ac_c" 1>&6 echo "configure:1812: checking whether $CXX supports -frepo" >&5 kde_cache=`echo frepo | sed 'y%.=/+-%___p_%'` if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else echo 'int main() { return 0; }' >conftest.cc eval "kde_cv_prog_cxx_$kde_cache=no" if test -z "`$CXX -frepo -c conftest.cc 2>&1`"; then if test -z "`$CXX -frepo -o conftest conftest.o 2>&1`"; then eval "kde_cv_prog_cxx_$kde_cache=yes" fi fi rm -f conftest* fi if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then echo "$ac_t""yes" 1>&6 : REPO="-frepo" NOREPO="-fno-repo" else echo "$ac_t""no" 1>&6 : fi if test -z "$REPO"; then echo $ac_n "checking whether $CXX supports -instances=explicit""... $ac_c" 1>&6 echo "configure:1846: checking whether $CXX supports -instances=explicit" >&5 kde_cache=`echo instances=explicit | sed 'y%.=/+-%___p_%'` if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else echo 'int main() { return 0; }' >conftest.cc eval "kde_cv_prog_cxx_$kde_cache=no" if test -z "`$CXX -instances=explicit -c conftest.cc 2>&1`"; then if test -z "`$CXX -instances=explicit -o conftest conftest.o 2>&1`"; then eval "kde_cv_prog_cxx_$kde_cache=yes" fi fi rm -f conftest* fi if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then echo "$ac_t""yes" 1>&6 : REPO="-instances=explicit" NOREPO="-instances=extern" else echo "$ac_t""no" 1>&6 : fi fi if test -n "$REPO"; then cat >> confdefs.h <&6 echo "configure:2006: checking for ld used by GCC" >&5 case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [\\/]* | [A-Za-z]:[\\/]*) re_direlt='/[^/][^/]*/\.\./' # Canonicalize the path of ld ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then echo $ac_n "checking for GNU ld""... $ac_c" 1>&6 echo "configure:2036: checking for GNU ld" >&5 else echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6 echo "configure:2039: checking for non-GNU ld" >&5 fi if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -z "$LD"; then IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some GNU ld's only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then test "$with_gnu_ld" != no && break else test "$with_gnu_ld" != yes && break fi fi done IFS="$ac_save_ifs" else lt_cv_path_LD="$LD" # Let the user override the test with a path. fi fi LD="$lt_cv_path_LD" if test -n "$LD"; then echo "$ac_t""$LD" 1>&6 else echo "$ac_t""no" 1>&6 fi test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; } echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6 echo "configure:2074: checking if the linker ($LD) is GNU ld" >&5 if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else # I'd rather use --version here, but apparently some GNU ld's only accept -v. if $LD -v 2>&1 &5; then lt_cv_prog_gnu_ld=yes else lt_cv_prog_gnu_ld=no fi fi echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6 with_gnu_ld=$lt_cv_prog_gnu_ld echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6 echo "configure:2091: checking for $LD option to reload object files" >&5 if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else lt_cv_ld_reload_flag='-r' fi echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6 reload_flag=$lt_cv_ld_reload_flag test -n "$reload_flag" && reload_flag=" $reload_flag" echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6 echo "configure:2103: checking for BSD-compatible nm" >&5 if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM="$NM" else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do test -z "$ac_dir" && ac_dir=. tmp_nm=$ac_dir/${ac_tool_prefix}nm if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then lt_cv_path_NM="$tmp_nm -B" break elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then lt_cv_path_NM="$tmp_nm -p" break else lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags fi fi done IFS="$ac_save_ifs" test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm fi fi NM="$lt_cv_path_NM" echo "$ac_t""$NM" 1>&6 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6 echo "configure:2141: checking whether ln -s works" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else rm -f conftestdata if ln -s X conftestdata 2>/dev/null then rm -f conftestdata ac_cv_prog_LN_S="ln -s" else ac_cv_prog_LN_S=ln fi fi LN_S="$ac_cv_prog_LN_S" if test "$ac_cv_prog_LN_S" = "ln -s"; then echo "$ac_t""yes" 1>&6 else echo "$ac_t""no" 1>&6 fi echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6 echo "configure:2162: checking how to recognise dependant libraries" >&5 if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file= lt_cv_deplibs_check_method='unknown' # Need to set the preceding variable on all platforms that support # interlibrary dependencies. # 'none' -- dependencies not supported. # `unknown' -- same as none, but documents that we really don't know. # 'pass_all' -- all dependencies passed with no checks. # 'test_compile' -- check by making test program. # 'file_magic [regex]' -- check by looking for files in library path # which responds to the $file_magic_cmd with a given egrep regex. # If you have `file' or equivalent on your system and you're not sure # whether `pass_all' will *always* work, you probably want this one. case $host_os in aix*) lt_cv_deplibs_check_method=pass_all ;; beos*) lt_cv_deplibs_check_method=pass_all ;; bsdi4*) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' lt_cv_file_magic_cmd='/usr/bin/file -L' lt_cv_file_magic_test_file=/shlib/libc.so ;; cygwin* | mingw* |pw32*) lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' lt_cv_file_magic_cmd='$OBJDUMP -f' ;; darwin* | rhapsody*) lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' lt_cv_file_magic_cmd='/usr/bin/file -L' case "$host_os" in rhapsody* | darwin1.012) lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System' ;; *) # Darwin 1.3 on lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' ;; esac ;; freebsd* ) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; gnu*) lt_cv_deplibs_check_method=pass_all ;; hpux10.20*|hpux11*) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; irix5* | irix6*) case $host_os in irix5*) # this will be overridden with pass_all, but let us keep it just in case lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" ;; *) case $LD in *-32|*"-32 ") libmagic=32-bit;; *-n32|*"-n32 ") libmagic=N32;; *-64|*"-64 ") libmagic=64-bit;; *) libmagic=never-match;; esac # this will be overridden with pass_all, but let us keep it just in case lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1" ;; esac lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` lt_cv_deplibs_check_method=pass_all ;; # This must be Linux ELF. linux-gnu*) case $host_cpu in alpha* | i*86 | powerpc* | sparc* | ia64* | s390* | m68k* | arm* | hppa* ) lt_cv_deplibs_check_method=pass_all ;; *) # glibc up to 2.1.1 does not perform some relocations on ARM lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; esac lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` ;; netbsd*) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then lt_cv_deplibs_check_method='file_magic NetBSD/[a-z0-9]* demand paged shared library' else lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object' fi lt_cv_file_magic_cmd='/usr/bin/file -L' lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; openbsd* ) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then case "$host_cpu" in i*86 ) lt_cv_deplibs_check_method='file_magic OpenBSD/i[3-9]86 demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; newsos6) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; osf3* | osf4* | osf5*) # this will be overridden with pass_all, but let us keep it just in case lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' lt_cv_file_magic_test_file=/shlib/libc.so lt_cv_deplibs_check_method=pass_all ;; sco3.2v5*) lt_cv_deplibs_check_method=pass_all ;; solaris*) lt_cv_deplibs_check_method=pass_all lt_cv_file_magic_test_file=/lib/libc.so ;; sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) case $host_vendor in ncr) lt_cv_deplibs_check_method=pass_all ;; motorola) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; esac ;; esac fi echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6 file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method if test $host != $build; then ac_tool_prefix=${host_alias}- else ac_tool_prefix= fi # Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! # Only perform the check for file, if the check method requires it case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6 echo "configure:2350: checking for ${ac_tool_prefix}file" >&5 if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else case $MAGIC_CMD in /*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; ?:/*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. ;; *) ac_save_MAGIC_CMD="$MAGIC_CMD" IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="/usr/bin:$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/${ac_tool_prefix}file; then lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | egrep "$file_magic_regex" > /dev/null; then : else cat <&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org EOF fi ;; esac fi break fi done IFS="$ac_save_ifs" MAGIC_CMD="$ac_save_MAGIC_CMD" ;; esac fi MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then echo "$ac_t""$MAGIC_CMD" 1>&6 else echo "$ac_t""no" 1>&6 fi if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then echo $ac_n "checking for file""... $ac_c" 1>&6 echo "configure:2412: checking for file" >&5 if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else case $MAGIC_CMD in /*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; ?:/*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. ;; *) ac_save_MAGIC_CMD="$MAGIC_CMD" IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="/usr/bin:$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/file; then lt_cv_path_MAGIC_CMD="$ac_dir/file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | egrep "$file_magic_regex" > /dev/null; then : else cat <&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org EOF fi ;; esac fi break fi done IFS="$ac_save_ifs" MAGIC_CMD="$ac_save_MAGIC_CMD" ;; esac fi MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then echo "$ac_t""$MAGIC_CMD" 1>&6 else echo "$ac_t""no" 1>&6 fi else MAGIC_CMD=: fi fi fi ;; esac # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ac_tool_prefix}ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:2483: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" break fi done IFS="$ac_save_ifs" fi fi RANLIB="$ac_cv_prog_RANLIB" if test -n "$RANLIB"; then echo "$ac_t""$RANLIB" 1>&6 else echo "$ac_t""no" 1>&6 fi if test -z "$ac_cv_prog_RANLIB"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:2515: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_RANLIB="ranlib" break fi done IFS="$ac_save_ifs" test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" fi fi RANLIB="$ac_cv_prog_RANLIB" if test -n "$RANLIB"; then echo "$ac_t""$RANLIB" 1>&6 else echo "$ac_t""no" 1>&6 fi else RANLIB=":" fi fi # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:2550: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" break fi done IFS="$ac_save_ifs" fi fi STRIP="$ac_cv_prog_STRIP" if test -n "$STRIP"; then echo "$ac_t""$STRIP" 1>&6 else echo "$ac_t""no" 1>&6 fi if test -z "$ac_cv_prog_STRIP"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:2582: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_STRIP="strip" break fi done IFS="$ac_save_ifs" test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":" fi fi STRIP="$ac_cv_prog_STRIP" if test -n "$STRIP"; then echo "$ac_t""$STRIP" 1>&6 else echo "$ac_t""no" 1>&6 fi else STRIP=":" fi fi # Check for any special flags to pass to ltconfig. libtool_flags="--cache-file=$cache_file" test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install" test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc" test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" libtool_flags="$libtool_flags --enable-dlopen" # Check whether --enable-libtool-lock or --disable-libtool-lock was given. if test "${enable_libtool_lock+set}" = set; then enableval="$enable_libtool_lock" : fi test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock" test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" # Check whether --with-pic or --without-pic was given. if test "${with_pic+set}" = set; then withval="$with_pic" pic_mode="$withval" else pic_mode=default fi test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic" test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic" # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in *-*-irix6*) # Find out which ABI we are using. echo '#line 2649 "configure"' > conftest.$ac_ext if { (eval echo configure:2650: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6 echo "configure:2671: checking whether the C compiler needs -belf" >&5 if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* lt_cv_cc_needs_belf=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* lt_cv_cc_needs_belf=no fi rm -f conftest* ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross fi echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6 if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; esac echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 echo "configure:2722: checking for Cygwin environment" >&5 if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_cygwin=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_cygwin=no fi rm -f conftest* rm -f conftest* fi echo "$ac_t""$ac_cv_cygwin" 1>&6 CYGWIN= test "$ac_cv_cygwin" = yes && CYGWIN=yes echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 echo "configure:2755: checking for mingw32 environment" >&5 if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_mingw32=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_mingw32=no fi rm -f conftest* rm -f conftest* fi echo "$ac_t""$ac_cv_mingw32" 1>&6 MINGW32= test "$ac_cv_mingw32" = yes && MINGW32=yes # Save cache, so that ltconfig can load it cat > confcache <<\EOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs. It is not useful on other systems. # If it contains results you don't want to keep, you may remove or edit it. # # By default, configure uses ./config.cache as the cache file, # creating it if it does not exist already. You can give configure # the --cache-file=FILE option to use a different cache file; that is # what configure does when it calls configure scripts in # subdirectories, so they share the cache. # Giving --cache-file=/dev/null disables caching, for debugging configure. # config.status only pays attention to the cache file if you give it the # --recheck option to rerun configure. # EOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, don't put newlines in cache variables' values. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | case `(ac_space=' '; set | grep ac_space) 2>&1` in *ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote substitution # turns \\\\ into \\, and sed turns \\ into \). sed -n \ -e "s/'/'\\\\''/g" \ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" ;; *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' ;; esac >> confcache if cmp -s $cache_file confcache; then : else if test -w $cache_file; then echo "updating cache $cache_file" cat confcache > $cache_file else echo "not updating unwritable cache $cache_file" fi fi rm -f confcache # Actually configure libtool. ac_aux_dir is where install-sh is found. AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \ AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \ objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \ deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ $libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \ || { echo "configure: error: libtool configure failed" 1>&2; exit 1; } # Reload cache, that may have been modified by ltconfig if test -r "$cache_file"; then echo "loading cache $cache_file" . $cache_file else echo "creating cache $cache_file" > $cache_file fi # This can be used to rebuild libtool when needed LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' # Redirect the config.log output again, so that the ltconfig log is not # clobbered by the next message. exec 5>>./config.log LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-cxx.sh" lt_save_CC="$CC" lt_save_CFLAGS="$CFLAGS" AR="$AR" LTCC="$CC" CC="$CXX" CXX="$CXX" CFLAGS="$CXXFLAGS" CPPFLAGS="$CPPFLAGS" \ MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \ AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \ objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \ deplibs_check_method="$deplibs_check_method" \ file_magic_cmd="$file_magic_cmd" \ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \ --build="$build" --add-tag=CXX $ac_aux_dir/ltcf-cxx.sh $host \ || { echo "configure: error: libtool tag configuration failed" 1>&2; exit 1; } CC="$lt_save_CC" CFLAGS="$lt_save_CFLAGS" # Redirect the config.log output again, so that the ltconfig log is not # clobbered by the next message. exec 5>>./config.log ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking for object suffix""... $ac_c" 1>&6 echo "configure:2902: checking for object suffix" >&5 if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else rm -f conftest* echo 'int i = 1;' > conftest.$ac_ext if { (eval echo configure:2908: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then for ac_file in conftest.*; do case $ac_file in *.c) ;; *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;; esac done else { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; } fi rm -f conftest* fi echo "$ac_t""$ac_cv_objext" 1>&6 OBJEXT=$ac_cv_objext ac_objext=$ac_cv_objext echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 echo "configure:2928: checking for executable suffix" >&5 if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$CYGWIN" = yes || test "$MINGW32" = yes; then ac_cv_exeext=.exe else rm -f conftest* echo 'int main () { return 0; }' > conftest.$ac_ext ac_cv_exeext= if { (eval echo configure:2938: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then for file in conftest.*; do case $file in *.c | *.o | *.obj) ;; *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; esac done else { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } fi rm -f conftest* test x"${ac_cv_exeext}" = x && ac_cv_exeext=no fi fi EXEEXT="" test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} echo "$ac_t""${ac_cv_exeext}" 1>&6 ac_exeext=$EXEEXT ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross LIBTOOL_SHELL="/bin/sh ./libtool" # LIBTOOL="$LIBTOOL --silent" KDE_PLUGIN="-avoid-version -module -no-undefined \$(KDE_RPATH)" # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:2984: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else case "$MSGFMT" in /*) ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test -n "`$ac_dir/$ac_word --version 2>&1 | grep 'GNU gettext'`"; then ac_cv_path_MSGFMT="$ac_dir/$ac_word" break fi fi done IFS="$ac_save_ifs" test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="msgfmt" ;; esac fi MSGFMT="$ac_cv_path_MSGFMT" if test -n "$MSGFMT"; then echo "$ac_t""$MSGFMT" 1>&6 else echo "$ac_t""no" 1>&6 fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:3018: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else case "$GMSGFMT" in /*) ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. ;; ?:/*) ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path. ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_GMSGFMT="$ac_dir/$ac_word" break fi done IFS="$ac_save_ifs" test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" ;; esac fi GMSGFMT="$ac_cv_path_GMSGFMT" if test -n "$GMSGFMT"; then echo "$ac_t""$GMSGFMT" 1>&6 else echo "$ac_t""no" 1>&6 fi if test -z "`$GMSGFMT --version 2>&1 | grep 'GNU gettext'`"; then echo "$ac_t""found msgfmt program is not GNU msgfmt; ignore it" 1>&6 GMSGFMT=":" fi MSGFMT=$GMSGFMT # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:3063: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else case "$XGETTEXT" in /*) ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then ac_cv_path_XGETTEXT="$ac_dir/$ac_word" break fi fi done IFS="$ac_save_ifs" test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" ;; esac fi XGETTEXT="$ac_cv_path_XGETTEXT" if test -n "$XGETTEXT"; then echo "$ac_t""$XGETTEXT" 1>&6 else echo "$ac_t""no" 1>&6 fi if test "$XGETTEXT" != ":"; then if $XGETTEXT --omit-header /dev/null 2> /dev/null; then : ; else echo "$ac_t""found xgettext programs is not GNU xgettext; ignore it" 1>&6 XGETTEXT=":" fi fi echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 echo "configure:3108: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else # This must be in double quotes, not single quotes, because CPP may get # substituted into the Makefile and "${CC-cc}" will confuse make. CPP="${CC-cc} -E" # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:3129: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:3146: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:3163: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* CPP=/lib/cpp fi rm -f conftest* fi rm -f conftest* fi rm -f conftest* ac_cv_prog_CPP="$CPP" fi CPP="$ac_cv_prog_CPP" else ac_cv_prog_CPP="$CPP" fi echo "$ac_t""$CPP" 1>&6 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking for main in -lcompat""... $ac_c" 1>&6 echo "configure:3196: checking for main in -lcompat" >&5 ac_lib_var=`echo compat'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lcompat $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 LIBCOMPAT="-lcompat" else echo "$ac_t""no" 1>&6 fi kde_have_crypt= echo $ac_n "checking for crypt in -lcrypt""... $ac_c" 1>&6 echo "configure:3233: checking for crypt in -lcrypt" >&5 ac_lib_var=`echo crypt'_'crypt | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lcrypt $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 LIBCRYPT="-lcrypt"; kde_have_crypt=yes else echo "$ac_t""no" 1>&6 echo $ac_n "checking for crypt in -lc""... $ac_c" 1>&6 echo "configure:3271: checking for crypt in -lc" >&5 ac_lib_var=`echo c'_'crypt | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lc $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 kde_have_crypt=yes else echo "$ac_t""no" 1>&6 echo "configure: warning: you have no crypt in either libcrypt or libc. You should install libcrypt from another source or configure with PAM support" 1>&2 kde_have_crypt=no fi fi if test $kde_have_crypt = yes; then cat >> confdefs.h <&6 echo "configure:3327: checking for socklen_t" >&5 if eval "test \"`echo '$''{'ac_cv_socklen_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cxx_cross ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cat > conftest.$ac_ext < #include int main() { socklen_t a=0; getsockname(0,(struct sockaddr*)0, &a); ; return 0; } EOF if { (eval echo configure:3357: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_socklen_t=socklen_t else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* cat > conftest.$ac_ext < #include int main() { int a=0; getsockname(0,(struct sockaddr*)0, &a); ; return 0; } EOF if { (eval echo configure:3378: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_socklen_t=int else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_socklen_t=size_t fi rm -f conftest* fi rm -f conftest* ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross fi echo "$ac_t""$ac_cv_socklen_t" 1>&6 if test "$ac_cv_socklen_t" != "socklen_t"; then cat >> confdefs.h <> confdefs.h <&6 echo "configure:3424: checking for dnet_ntoa in -ldnet" >&5 ac_lib_var=`echo dnet'_'dnet_ntoa | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-ldnet $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet" else echo "$ac_t""no" 1>&6 fi if test $ac_cv_lib_dnet_dnet_ntoa = no; then echo $ac_n "checking for dnet_ntoa in -ldnet_stub""... $ac_c" 1>&6 echo "configure:3465: checking for dnet_ntoa in -ldnet_stub" >&5 ac_lib_var=`echo dnet_stub'_'dnet_ntoa | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-ldnet_stub $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub" else echo "$ac_t""no" 1>&6 fi fi echo $ac_n "checking for inet_ntoa""... $ac_c" 1>&6 echo "configure:3506: checking for inet_ntoa" >&5 if eval "test \"`echo '$''{'ac_cv_func_inet_ntoa'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char inet_ntoa(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_inet_ntoa) || defined (__stub___inet_ntoa) choke me #else inet_ntoa(); #endif ; return 0; } EOF if { (eval echo configure:3534: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_inet_ntoa=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_inet_ntoa=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'inet_ntoa`\" = yes"; then echo "$ac_t""yes" 1>&6 : else echo "$ac_t""no" 1>&6 fi if test $ac_cv_func_inet_ntoa = no; then echo $ac_n "checking for inet_ntoa in -lnsl""... $ac_c" 1>&6 echo "configure:3555: checking for inet_ntoa in -lnsl" >&5 ac_lib_var=`echo nsl'_'inet_ntoa | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lnsl $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl" else echo "$ac_t""no" 1>&6 fi fi echo $ac_n "checking for connect""... $ac_c" 1>&6 echo "configure:3596: checking for connect" >&5 if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char connect(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_connect) || defined (__stub___connect) choke me #else connect(); #endif ; return 0; } EOF if { (eval echo configure:3624: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_connect=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_connect=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'connect`\" = yes"; then echo "$ac_t""yes" 1>&6 : else echo "$ac_t""no" 1>&6 fi if test $ac_cv_func_connect = no; then echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6 echo "configure:3645: checking for connect in -lsocket" >&5 ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lsocket $X_EXTRA_LIBS $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS" else echo "$ac_t""no" 1>&6 fi fi echo $ac_n "checking for remove""... $ac_c" 1>&6 echo "configure:3687: checking for remove" >&5 if eval "test \"`echo '$''{'ac_cv_func_remove'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char remove(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_remove) || defined (__stub___remove) choke me #else remove(); #endif ; return 0; } EOF if { (eval echo configure:3715: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_remove=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_remove=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'remove`\" = yes"; then echo "$ac_t""yes" 1>&6 : else echo "$ac_t""no" 1>&6 fi if test $ac_cv_func_remove = no; then echo $ac_n "checking for remove in -lposix""... $ac_c" 1>&6 echo "configure:3736: checking for remove in -lposix" >&5 ac_lib_var=`echo posix'_'remove | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lposix $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix" else echo "$ac_t""no" 1>&6 fi fi # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. echo $ac_n "checking for shmat""... $ac_c" 1>&6 echo "configure:3779: checking for shmat" >&5 if eval "test \"`echo '$''{'ac_cv_func_shmat'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char shmat(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_shmat) || defined (__stub___shmat) choke me #else shmat(); #endif ; return 0; } EOF if { (eval echo configure:3807: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_shmat=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_shmat=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'shmat`\" = yes"; then echo "$ac_t""yes" 1>&6 : else echo "$ac_t""no" 1>&6 echo $ac_n "checking for shmat in -lipc""... $ac_c" 1>&6 echo "configure:3825: checking for shmat in -lipc" >&5 ac_lib_var=`echo ipc'_'shmat | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lipc $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc" else echo "$ac_t""no" 1>&6 fi fi # Solaris 2.6 needs -lresolv for res_init echo $ac_n "checking for res_init""... $ac_c" 1>&6 echo "configure:3869: checking for res_init" >&5 if eval "test \"`echo '$''{'ac_cv_func_res_init'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char res_init(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_res_init) || defined (__stub___res_init) choke me #else res_init(); #endif ; return 0; } EOF if { (eval echo configure:3897: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_res_init=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_res_init=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'res_init`\" = yes"; then echo "$ac_t""yes" 1>&6 : else echo "$ac_t""no" 1>&6 echo $ac_n "checking for res_init in -lresolv""... $ac_c" 1>&6 echo "configure:3915: checking for res_init in -lresolv" >&5 ac_lib_var=`echo resolv'_'res_init | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lresolv $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 X_EXTRA_LIBS="$X_EXTRA_LIBS -lresolv" else echo "$ac_t""no" 1>&6 fi fi LIBSOCKET="$X_EXTRA_LIBS" echo $ac_n "checking for killpg in -lucb""... $ac_c" 1>&6 echo "configure:3961: checking for killpg in -lucb" >&5 ac_lib_var=`echo ucb'_'killpg | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lucb $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 LIBUCB="-lucb" else echo "$ac_t""no" 1>&6 fi case $host in *-*-lynxos* ) echo $ac_n "checking LynxOS header file wrappers""... $ac_c" 1>&6 echo "configure:4003: checking LynxOS header file wrappers" >&5 CFLAGS="$CFLAGS -D__NO_INCLUDE_WARN__" echo "$ac_t""disabled" 1>&6 echo $ac_n "checking for gethostbyname in -lbsd""... $ac_c" 1>&6 echo "configure:4007: checking for gethostbyname in -lbsd" >&5 ac_lib_var=`echo bsd'_'gethostbyname | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lbsd $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 LIBSOCKET="-lbsd" else echo "$ac_t""no" 1>&6 fi ;; esac echo $ac_n "checking size of int""... $ac_c" 1>&6 echo "configure:4049: checking size of int" >&5 if eval "test \"`echo '$''{'ac_cv_sizeof_int'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$cross_compiling" = yes; then ac_cv_sizeof_int=4 else cat > conftest.$ac_ext < main() { FILE *f=fopen("conftestval", "w"); if (!f) exit(1); fprintf(f, "%d\n", sizeof(int)); exit(0); } EOF if { (eval echo configure:4068: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_sizeof_int=`cat conftestval` else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* ac_cv_sizeof_int=0 fi rm -fr conftest* fi fi echo "$ac_t""$ac_cv_sizeof_int" 1>&6 cat >> confdefs.h <&6 echo "configure:4087: checking size of long" >&5 if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$cross_compiling" = yes; then ac_cv_sizeof_long=4 else cat > conftest.$ac_ext < main() { FILE *f=fopen("conftestval", "w"); if (!f) exit(1); fprintf(f, "%d\n", sizeof(long)); exit(0); } EOF if { (eval echo configure:4106: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_sizeof_long=`cat conftestval` else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* ac_cv_sizeof_long=0 fi rm -fr conftest* fi fi echo "$ac_t""$ac_cv_sizeof_long" 1>&6 cat >> confdefs.h <&6 echo "configure:4125: checking size of char *" >&5 if eval "test \"`echo '$''{'ac_cv_sizeof_char_p'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$cross_compiling" = yes; then ac_cv_sizeof_char_p=4 else cat > conftest.$ac_ext < main() { FILE *f=fopen("conftestval", "w"); if (!f) exit(1); fprintf(f, "%d\n", sizeof(char *)); exit(0); } EOF if { (eval echo configure:4144: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_sizeof_char_p=`cat conftestval` else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* ac_cv_sizeof_char_p=0 fi rm -fr conftest* fi fi echo "$ac_t""$ac_cv_sizeof_char_p" 1>&6 cat >> confdefs.h <&6 echo "configure:4163: checking size of char" >&5 if eval "test \"`echo '$''{'ac_cv_sizeof_char'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$cross_compiling" = yes; then ac_cv_sizeof_char=1 else cat > conftest.$ac_ext < main() { FILE *f=fopen("conftestval", "w"); if (!f) exit(1); fprintf(f, "%d\n", sizeof(char)); exit(0); } EOF if { (eval echo configure:4182: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_sizeof_char=`cat conftestval` else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* ac_cv_sizeof_char=0 fi rm -fr conftest* fi fi echo "$ac_t""$ac_cv_sizeof_char" 1>&6 cat >> confdefs.h <&6 echo "configure:4203: checking for dlopen in -ldl" >&5 ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-ldl $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 LIBDL="-ldl" ac_cv_have_dlfcn=yes else echo "$ac_t""no" 1>&6 fi echo $ac_n "checking for shl_unload in -ldld""... $ac_c" 1>&6 echo "configure:4247: checking for shl_unload in -ldld" >&5 ac_lib_var=`echo dld'_'shl_unload | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-ldld $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 LIBDL="-ldld" ac_cv_have_shload=yes else echo "$ac_t""no" 1>&6 fi echo $ac_n "checking for extra includes""... $ac_c" 1>&6 echo "configure:4295: checking for extra includes" >&5 # Check whether --with-extra-includes or --without-extra-includes was given. if test "${with_extra_includes+set}" = set; then withval="$with_extra_includes" kde_use_extra_includes="$withval" else kde_use_extra_includes=NONE fi kde_extra_includes= if test -n "$kde_use_extra_includes" && \ test "$kde_use_extra_includes" != "NONE"; then ac_save_ifs=$IFS IFS=':' for dir in $kde_use_extra_includes; do kde_extra_includes="$kde_extra_includes $dir" USER_INCLUDES="$USER_INCLUDES -I$dir" done IFS=$ac_save_ifs kde_use_extra_includes="added" else kde_use_extra_includes="no" fi echo "$ac_t""$kde_use_extra_includes" 1>&6 kde_extra_libs= echo $ac_n "checking for extra libs""... $ac_c" 1>&6 echo "configure:4326: checking for extra libs" >&5 # Check whether --with-extra-libs or --without-extra-libs was given. if test "${with_extra_libs+set}" = set; then withval="$with_extra_libs" kde_use_extra_libs=$withval else kde_use_extra_libs=NONE fi if test -n "$kde_use_extra_libs" && \ test "$kde_use_extra_libs" != "NONE"; then ac_save_ifs=$IFS IFS=':' for dir in $kde_use_extra_libs; do kde_extra_libs="$kde_extra_libs $dir" KDE_EXTRA_RPATH="$KDE_EXTRA_RPATH -R $dir" USER_LDFLAGS="$USER_LDFLAGS -L$dir" done IFS=$ac_save_ifs kde_use_extra_libs="added" else kde_use_extra_libs="no" fi echo "$ac_t""$kde_use_extra_libs" 1>&6 echo $ac_n "checking for libz""... $ac_c" 1>&6 echo "configure:4360: checking for libz" >&5 if eval "test \"`echo '$''{'ac_cv_lib_z'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross kde_save_LIBS="$LIBS" LIBS="$all_libraries $USER_LDFLAGS -lz $LIBSOCKET" kde_save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" cat > conftest.$ac_ext < int main() { return (zlibVersion() == ZLIB_VERSION); ; return 0; } EOF if { (eval echo configure:4386: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_z='-lz'" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_z=no" fi rm -f conftest* LIBS="$kde_save_LIBS" CFLAGS="$kde_save_CFLAGS" fi if test ! "$ac_cv_lib_z" = no; then cat >> confdefs.h <&6 else { echo "configure: error: not found. Check your installation and look into config.log" 1>&2; exit 1; } LIBZ="" fi echo $ac_n "checking for X""... $ac_c" 1>&6 echo "configure:4416: checking for X" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross if eval "test \"`echo '$''{'kde_cv_have_x'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else # One or both of the vars are not set, and there is no cached value. if test "{$x_includes+set}" = set || test "$x_includes" = NONE; then kde_x_includes=NO else kde_x_includes=$x_includes fi if test "{$x_libraries+set}" = set || test "$x_libraries" = NONE; then kde_x_libraries=NO else kde_x_libraries=$x_libraries fi # below we use the standard autoconf calls ac_x_libraries=$kde_x_libraries ac_x_includes=$kde_x_includes if test "$ac_x_includes" = NO; then # Guess where to find include files, by looking for this one X11 .h file. test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h # First, try using that file with no special directory specified. cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:4455: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* # We can compile using X headers with no special include directory. ac_x_includes= else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* # Look for the header file in a standard set of common directories. # Check X11 before X11Rn because it is often a symlink to the current release. for ac_dir in \ /usr/X11/include \ /usr/X11R6/include \ /usr/X11R5/include \ /usr/X11R4/include \ \ /usr/include/X11 \ /usr/include/X11R6 \ /usr/include/X11R5 \ /usr/include/X11R4 \ \ /usr/local/X11/include \ /usr/local/X11R6/include \ /usr/local/X11R5/include \ /usr/local/X11R4/include \ \ /usr/local/include/X11 \ /usr/local/include/X11R6 \ /usr/local/include/X11R5 \ /usr/local/include/X11R4 \ \ /usr/X386/include \ /usr/x386/include \ /usr/XFree86/include/X11 \ \ /usr/include \ /usr/local/include \ /usr/unsupported/include \ /usr/athena/include \ /usr/local/x11r5/include \ /usr/lpp/Xamples/include \ \ /usr/openwin/include \ /usr/openwin/share/include \ ; \ do if test -r "$ac_dir/$x_direct_test_include"; then ac_x_includes=$ac_dir break fi done fi rm -f conftest* fi # $ac_x_includes = NO if test "$ac_x_libraries" = NO; then # Check for the libraries. test -z "$x_direct_test_library" && x_direct_test_library=Xt test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc # See if we find them without any special options. # Don't add to $LIBS permanently. ac_save_LIBS="$LIBS" LIBS="-l$x_direct_test_library $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* LIBS="$ac_save_LIBS" # We can link X programs with no special library path. ac_x_libraries= else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* LIBS="$ac_save_LIBS" # First see if replacing the include by lib works. # Check X11 before X11Rn because it is often a symlink to the current release. for ac_dir in `echo "$ac_x_includes" | sed s/include/lib/` \ /usr/X11/lib \ /usr/X11R6/lib \ /usr/X11R5/lib \ /usr/X11R4/lib \ \ /usr/lib/X11 \ /usr/lib/X11R6 \ /usr/lib/X11R5 \ /usr/lib/X11R4 \ \ /usr/local/X11/lib \ /usr/local/X11R6/lib \ /usr/local/X11R5/lib \ /usr/local/X11R4/lib \ \ /usr/local/lib/X11 \ /usr/local/lib/X11R6 \ /usr/local/lib/X11R5 \ /usr/local/lib/X11R4 \ \ /usr/X386/lib \ /usr/x386/lib \ /usr/XFree86/lib/X11 \ \ /usr/lib \ /usr/local/lib \ /usr/unsupported/lib \ /usr/athena/lib \ /usr/local/x11r5/lib \ /usr/lpp/Xamples/lib \ /lib/usr/lib/X11 \ \ /usr/openwin/lib \ /usr/openwin/share/lib \ ; \ do for ac_extension in a so sl; do if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then ac_x_libraries=$ac_dir break 2 fi done done fi rm -f conftest* fi # $ac_x_libraries = NO case "$host" in mips-sgi-irix6*) ;; *-*-solaris*) ;; *) rm -fr conftestdir if mkdir conftestdir; then cd conftestdir # Make sure to not put "make" in the Imakefile rules, since we grep it out. cat > Imakefile <<'EOF' acfindx: @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"' EOF if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then # GNU make sometimes prints "make[1]: Entering...", which would confuse us. eval `${MAKE-make} acfindx 2>/dev/null | grep -v make` # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR. for ac_extension in a so sl; do if test ! -f $ac_im_usrlibdir/libX11.$ac_extension && test -f $ac_im_libdir/libX11.$ac_extension; then ac_im_usrlibdir=$ac_im_libdir; break fi done # Screen out bogus values from the imake configuration. They are # bogus both because they are the default anyway, and because # using them would break gcc on systems where it needs fixed includes. case "$ac_im_incroot" in /usr/include) ;; *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes="$ac_im_incroot" ;; esac case "$ac_im_usrlibdir" in /usr/lib | /lib) ;; *) test -d "$ac_im_usrlibdir" && ac_x_libraries="$ac_im_usrlibdir" ;; esac fi cd .. rm -fr conftestdir fi if test -z "$ac_x_includes"; then ac_x_includes="." fi if test -z "$ac_x_libraries"; then ac_x_libraries="/usr/lib" fi esac #from now on we use our own again # when the user already gave --x-includes, we ignore # what the standard autoconf macros told us. if test "$kde_x_includes" = NO; then kde_x_includes=$ac_x_includes fi # for --x-libraries too if test "$kde_x_libraries" = NO; then kde_x_libraries=$ac_x_libraries fi if test "$kde_x_includes" = NO; then { echo "configure: error: Can't find X includes. Please check your installation and add the correct paths!" 1>&2; exit 1; } fi if test "$kde_x_libraries" = NO; then { echo "configure: error: Can't find X libraries. Please check your installation and add the correct paths!" 1>&2; exit 1; } fi # Record where we found X for the cache. kde_cv_have_x="have_x=yes \ kde_x_includes=$kde_x_includes kde_x_libraries=$kde_x_libraries" fi eval "$kde_cv_have_x" if test "$have_x" != yes; then echo "$ac_t""$have_x" 1>&6 no_x=yes else echo "$ac_t""libraries $kde_x_libraries, headers $kde_x_includes" 1>&6 fi if test -z "$kde_x_includes" || test "x$kde_x_includes" = xNONE; then X_INCLUDES="" x_includes="."; else x_includes=$kde_x_includes X_INCLUDES="-I$x_includes" fi if test -z "$kde_x_libraries" || test "x$kde_x_libraries" = xNONE; then X_LDFLAGS="" x_libraries="/usr/lib"; else x_libraries=$kde_x_libraries X_LDFLAGS="-L$x_libraries" fi all_includes="$X_INCLUDES" all_libraries="$X_LDFLAGS" # Check for libraries that X11R6 Xt/Xaw programs need. ac_save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $X_LDFLAGS" # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to # check for ICE first), but we must link in the order -lSM -lICE or # we get undefined symbols. So assume we have SM if we have ICE. # These have to be linked with before -lX11, unlike the other # libraries we check for below, so use a different variable. # --interran@uluru.Stanford.EDU, kb@cs.umb.edu. echo $ac_n "checking for IceConnectionNumber in -lICE""... $ac_c" 1>&6 echo "configure:4705: checking for IceConnectionNumber in -lICE" >&5 ac_lib_var=`echo ICE'_'IceConnectionNumber | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lICE $X_EXTRA_LIBS $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 LIBSM="-lSM -lICE" else echo "$ac_t""no" 1>&6 fi LDFLAGS="$ac_save_LDFLAGS" LIB_X11='-lX11 $(LIBSOCKET)' echo $ac_n "checking for libXext""... $ac_c" 1>&6 echo "configure:4753: checking for libXext" >&5 if eval "test \"`echo '$''{'kde_cv_have_libXext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else kde_ldflags_safe="$LDFLAGS" kde_libs_safe="$LIBS" LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS" LIBS="-lXext -lX11 $LIBSOCKET" cat > conftest.$ac_ext < #ifdef STDC_HEADERS # include #endif int main() { printf("hello Xext\n"); ; return 0; } EOF if { (eval echo configure:4779: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* kde_cv_have_libXext=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* kde_cv_have_libXext=no fi rm -f conftest* LDFLAGS=$kde_ldflags_safe LIBS=$kde_libs_safe fi echo "$ac_t""$kde_cv_have_libXext" 1>&6 if test "$kde_cv_have_libXext" = "no"; then { echo "configure: error: We need a working libXext to proceed. Since configure can't find it itself, we stop here assuming that make wouldn't find them either." 1>&2; exit 1; } fi echo $ac_n "checking for Xinerama""... $ac_c" 1>&6 echo "configure:4806: checking for Xinerama" >&5 # Check whether --with-xinerama or --without-xinerama was given. if test "${with_xinerama+set}" = set; then withval="$with_xinerama" no_xinerama=no else no_xinerama=yes fi kde_save_LDFLAGS="$LDFLAGS" kde_save_CFLAGS="$CFLAGS" kde_save_LIBS="$LIBS" LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS" CFLAGS="$CFLAGS -I$x_includes" LIBS="-lXinerama -lXext" if test "x$no_xinerama" = "xno"; then if eval "test \"`echo '$''{'ac_cv_have_xinerama'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include int main() { XineramaIsActive(NULL); ; return 0; } EOF if { (eval echo configure:4844: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_have_xinerama="yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_have_xinerama="no" fi rm -f conftest* fi else ac_cv_have_xinerama=no; fi echo "$ac_t""$ac_cv_have_xinerama" 1>&6 LIBXINERAMA="" if test "$ac_cv_have_xinerama" = "yes"; then cat >> confdefs.h <<\EOF #define HAVE_XINERAMA 1 EOF LIBXINERAMA="-lXinerama" fi LDFLAGS="$kde_save_LDFLAGS" CFLAGS="$kde_save_CFLAGS" LIBS="$kde_save_LIBS" ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross if test -z ""; then kde_qtver=2 kde_qtsubver=1 else kde_qtsubver=`echo "" | sed -e 's#[0-9]\+\.\([0-9]\+\).*#\1#'` # following is the check if subversion isn´t found in passed argument if test "$kde_qtsubver" = ""; then kde_qtsubver=1 fi kde_qtver=`echo "" | sed -e 's#^\([0-9]\+\)\..*#\1#'` if test "$kde_qtver" = "1"; then kde_qtsubver=42 else # this is the version number fallback to 2.1, unless major version is 1 or 2 if test "$kde_qtver" != "2"; then kde_qtver=2 kde_qtsubver=1 fi fi fi if test -z ""; then if test $kde_qtver = 2; then if test $kde_qtsubver -gt 0; then kde_qt_minversion=">= Qt 2.2.2" else kde_qt_minversion=">= Qt 2.0.2" fi else kde_qt_minversion=">= 1.42 and < 2.0" fi else kde_qt_minversion= fi if test -z ""; then if test $kde_qtver = 2; then if test $kde_qtsubver -gt 0; then kde_qt_verstring="QT_VERSION >= 222" else kde_qt_verstring="QT_VERSION >= 200" fi else kde_qt_verstring="QT_VERSION >= 142 && QT_VERSION < 200" fi else kde_qt_verstring= fi if test $kde_qtver = 2; then kde_qt_dirs="$QTDIR /usr/lib/qt2 /usr/lib/qt" else kde_qt_dirs="$QTDIR /usr/lib/qt" fi echo $ac_n "checking for libpng""... $ac_c" 1>&6 echo "configure:4949: checking for libpng" >&5 if eval "test \"`echo '$''{'ac_cv_lib_png'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else kde_save_LIBS="$LIBS" LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm -lX11 $LIBSOCKET" kde_save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext < int main() { png_structp png_ptr = png_create_read_struct( /* image ptr */ PNG_LIBPNG_VER_STRING, 0, 0, 0 ); return( png_ptr != 0 ); ; return 0; } EOF if { (eval echo configure:4979: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_png='-lpng $LIBZ -lm'" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_png=no" fi rm -f conftest* LIBS="$kde_save_LIBS" CFLAGS="$kde_save_CFLAGS" fi if eval "test ! \"`echo $ac_cv_lib_png`\" = no"; then cat >> confdefs.h <&6 else echo "$ac_t""no" 1>&6 LIBPNG="" fi echo $ac_n "checking for libjpeg6b""... $ac_c" 1>&6 echo "configure:5011: checking for libjpeg6b" >&5 if eval "test \"`echo '$''{'ac_cv_lib_jpeg_6b'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross ac_save_LIBS="$LIBS" LIBS="$all_libraries $USER_LDFLAGS -ljpeg6b -lm" ac_save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_jpeg_6b=-ljpeg6b" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_jpeg_6b=no" fi rm -f conftest* LIBS="$ac_save_LIBS" CFLAGS="$ac_save_CFLAGS" fi if eval "test ! \"`echo $ac_cv_lib_jpeg_6b`\" = no"; then LIBJPEG="$ac_cv_lib_jpeg_6b" echo "$ac_t""$ac_cv_lib_jpeg_6b" 1>&6 else echo "$ac_t""no" 1>&6 echo $ac_n "checking for libjpeg""... $ac_c" 1>&6 echo "configure:5072: checking for libjpeg" >&5 if eval "test \"`echo '$''{'ac_cv_lib_jpeg_normal'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross ac_save_LIBS="$LIBS" LIBS="$all_libraries $USER_LDFLAGS -ljpeg -lm" ac_save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_jpeg_normal=-ljpeg" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_jpeg_normal=no" fi rm -f conftest* LIBS="$ac_save_LIBS" CFLAGS="$ac_save_CFLAGS" fi if eval "test ! \"`echo $ac_cv_lib_jpeg_normal`\" = no"; then LIBJPEG="$ac_cv_lib_jpeg_normal" echo "$ac_t""$ac_cv_lib_jpeg_normal" 1>&6 else echo "$ac_t""no" 1>&6 if test -f "$kde_libraries/libjpeg.so"; then test -f ./libjpegkde.so || $LN_S $kde_libraries/libjpeg.so ./libjpegkde.so ac_cv_lib_jpeg="-L\${topdir} -ljpegkde" else if test -f "$kde_libraries/libjpeg.sl"; then test -f ./libjpegkde.sl ||$LN_S $kde_libraries/libjpeg.sl ./libjpegkde.sl ac_cv_lib_jpeg="-L\${topdir} -ljpegkde" else if test -f "$kde_libraries/libjpeg.a"; then test -f ./libjpegkde.a || $LN_S $kde_libraries/libjpeg.a ./libjpegkde.a ac_cv_lib_jpeg="-L\${topdir} -ljpegkde" else ac_cv_lib_jpeg= fi fi fi LIBJPEG=$ac_cv_lib_jpeg fi fi jpeg_incdirs="/usr/include /usr/local/include $kde_extra_includes" jpeg_incdir=NO for i in $jpeg_incdirs; do for j in jpeglib.h; do if test -r "$i/$j"; then jpeg_incdir=$i break 2 fi done done test "x$jpeg_incdir" = xNO && jpeg_incdir= if test -n "$jpeg_incdir" && test -n "$LIBJPEG" ; then cat >> confdefs.h <&2 else echo "configure: warning: libjpeg not found. disable JPEG support." 1>&2 fi jpeg_incdir= LIBJPEG= fi # Check whether --enable-mt or --disable-mt was given. if test "${enable_mt+set}" = set; then enableval="$enable_mt" kde_use_qt_mt=$enableval else kde_use_qt_mt=no fi USING_QT_MT="" if test "x$kde_use_qt_mt" = "xyes"; then case $host in *-*-linux-*) if test "x$GCC" = "xyes"; then CPPFLAGS="$CPPFLAGS -DQT_THREAD_SUPPORT -pthread" X_EXTRA_LIBS="$X_EXTRA_LIBS -pthread" else echo "configure: warning: Compiler is not gcc. MT support disabled." 1>&2 fi ;; *) echo "configure: warning: MT not yet supported on $host - disabled." 1>&2 ;; esac fi kde_qt_was_given=yes if test -z "$LIBQT_GLOB"; then LIBQT_GLOB="libqt.*" fi if test -z "$LIBQT"; then LIBQT="-lqt" kde_int_qt="-lqt" if test "x$kde_use_qt_mt" = "xyes"; then case $host in *-*-linux-*) if test "x$GCC" = "xyes"; then LIBQT="-lqt-mt" kde_int_qt="-lqt-mt" LIBQT_GLOB="libqt-mt.*" USING_QT_MT="using -mt" fi ;; esac fi kde_qt_was_given=no else kde_int_qt="$LIBQT" fi if test $kde_qtver = 2; then LIBQT="$LIBQT $LIBPNG $LIBJPEG" fi echo $ac_n "checking for Qt""... $ac_c" 1>&6 echo "configure:5275: checking for Qt" >&5 LIBQT="$LIBQT $X_PRE_LIBS -lXext -lX11 $LIBSM $LIBSOCKET" ac_qt_includes=NO ac_qt_libraries=NO ac_qt_bindir=NO qt_libraries="" qt_includes="" # Check whether --with-qt-dir or --without-qt-dir was given. if test "${with_qt_dir+set}" = set; then withval="$with_qt_dir" ac_qt_includes="$withval"/include ac_qt_libraries="$withval"/lib ac_qt_bindir="$withval"/bin fi # Check whether --with-qt-includes or --without-qt-includes was given. if test "${with_qt_includes+set}" = set; then withval="$with_qt_includes" ac_qt_includes="$withval" fi kde_qt_libs_given=no # Check whether --with-qt-libraries or --without-qt-libraries was given. if test "${with_qt_libraries+set}" = set; then withval="$with_qt_libraries" ac_qt_libraries="$withval" kde_qt_libs_given=yes fi if eval "test \"`echo '$''{'ac_cv_have_qt'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else #try to guess Qt locations qt_incdirs="" for dir in $kde_qt_dirs; do qt_incdirs="$qt_incdirs $dir/include $dir" done qt_incdirs="$QTINC $qt_incdirs /usr/local/qt/include /usr/include/qt /usr/include /usr/X11R6/include/X11/qt /usr/X11R6/include/qt /usr/X11R6/include/qt2 $x_includes" if test ! "$ac_qt_includes" = "NO"; then qt_incdirs="$ac_qt_includes $qt_incdirs" fi if test "$kde_qtver" = "2"; then kde_qt_header=qstyle.h else kde_qt_header=qglobal.h fi qt_incdir=NO for i in $qt_incdirs; do for j in $kde_qt_header; do if test -r "$i/$j"; then qt_incdir=$i break 2 fi done done ac_qt_includes="$qt_incdir" qt_libdirs="" for dir in $kde_qt_dirs; do qt_libdirs="$qt_libdirs $dir/lib $dir" done qt_libdirs="$QTLIB $qt_libdirs /usr/X11R6/lib /usr/lib /usr/local/qt/lib $x_libraries" if test ! "$ac_qt_libraries" = "NO"; then qt_libdir=$ac_qt_libraries else qt_libdirs="$ac_qt_libraries $qt_libdirs" # if the Qt was given, the chance is too big that libqt.* doesn't exist qt_libdir=NONE for dir in $qt_libdirs; do try="ls -1 $dir/${LIBQT_GLOB}" if test -n "`$try 2> /dev/null`"; then qt_libdir=$dir; break; else echo "tried $dir" >&5 ; fi done fi ac_qt_libraries="$qt_libdir" ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cxx_cross ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' ac_cxxflags_safe="$CXXFLAGS" ac_ldflags_safe="$LDFLAGS" ac_libs_safe="$LIBS" CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes" LDFLAGS="$LDFLAGS -L$qt_libdir $all_libraries $USER_LDFLAGS" LIBS="$LIBS $LIBQT" cat > conftest.$ac_ext < #include EOF if test "$kde_qtver" = "2"; then cat >> conftest.$ac_ext < #include #include EOF if test $kde_qtsubver -gt 0; then cat >> conftest.$ac_ext < EOF fi fi echo "#if ! ($kde_qt_verstring)" >> conftest.$ac_ext cat >> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -f conftest* else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_qt_libraries="NO" fi rm -f conftest* CXXFLAGS="$ac_cxxflags_safe" LDFLAGS="$ac_ldflags_safe" LIBS="$ac_libs_safe" ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross if test "$ac_qt_includes" = NO || test "$ac_qt_libraries" = NO; then ac_cv_have_qt="have_qt=no" ac_qt_notfound="" if test "$ac_qt_includes" = NO; then if test "$ac_qt_libraries" = NO; then ac_qt_notfound="(headers and libraries)"; else ac_qt_notfound="(headers)"; fi else ac_qt_notfound="(libraries)"; fi { echo "configure: error: Qt ($kde_qt_minversion) $ac_qt_notfound not found. Please check your installation! For more details about this problem, look at the end of config.log." 1>&2; exit 1; } else have_qt="yes" fi fi eval "$ac_cv_have_qt" if test "$have_qt" != yes; then echo "$ac_t""$have_qt" 1>&6; else ac_cv_have_qt="have_qt=yes \ ac_qt_includes=$ac_qt_includes ac_qt_libraries=$ac_qt_libraries" echo "$ac_t""libraries $ac_qt_libraries, headers $ac_qt_includes $USING_QT_MT" 1>&6 qt_libraries="$ac_qt_libraries" qt_includes="$ac_qt_includes" fi if test ! "$kde_qt_libs_given" = "yes"; then echo $ac_n "checking if Qt compiles without flags""... $ac_c" 1>&6 echo "configure:5492: checking if Qt compiles without flags" >&5 if eval "test \"`echo '$''{'kde_cv_qt_direct'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cxx_cross ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' ac_LD_LIBRARY_PATH_safe=$LD_LIBRARY_PATH ac_LIBRARY_PATH="$LIBRARY_PATH" ac_cxxflags_safe="$CXXFLAGS" ac_ldflags_safe="$LDFLAGS" ac_libs_safe="$LIBS" CXXFLAGS="$CXXFLAGS -I$qt_includes" LDFLAGS="$LDFLAGS $X_LDFLAGS" LIBS="$LIBQT -lXext -lX11 $LIBSOCKET" LD_LIBRARY_PATH= export LD_LIBRARY_PATH LIBRARY_PATH= export LIBRARY_PATH cat > conftest.$ac_ext < #include EOF if test "$kde_qtver" = "2"; then cat >> conftest.$ac_ext < #include #include EOF if test $kde_qtsubver -gt 0; then cat >> conftest.$ac_ext < EOF fi fi echo "#if ! ($kde_qt_verstring)" >> conftest.$ac_ext cat >> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then kde_cv_qt_direct="yes" else kde_cv_qt_direct="no" echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* CXXFLAGS="$ac_cxxflags_safe" LDFLAGS="$ac_ldflags_safe" LIBS="$ac_libs_safe" LD_LIBRARY_PATH="$ac_LD_LIBRARY_PATH_safe" export LD_LIBRARY_PATH LIBRARY_PATH="$ac_LIBRARY_PATH" export LIBRARY_PATH ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross fi if test "$kde_cv_qt_direct" = "yes"; then echo "$ac_t""yes" 1>&6 qt_libraries= else echo "$ac_t""no" 1>&6 fi fi if test "$qt_includes" = "$x_includes" || test -z "$qt_includes"; then QT_INCLUDES=""; else QT_INCLUDES="-I$qt_includes" all_includes="$QT_INCLUDES $all_includes" fi if test "$qt_libraries" = "$x_libraries" || test -z "$qt_libraries"; then QT_LDFLAGS="" else QT_LDFLAGS="-L$qt_libraries" all_libraries="$all_libraries $QT_LDFLAGS" fi qt_bindirs="" for dir in $kde_qt_dirs; do qt_bindirs="$qt_bindirs $dir/bin $dir/src/moc" done qt_bindirs="$qt_bindirs /usr/bin /usr/X11R6/bin /usr/local/qt/bin" if test ! "$ac_qt_bindir" = "NO"; then qt_bindirs="$ac_qt_bindir $qt_bindirs" fi echo $ac_n "checking for moc""... $ac_c" 1>&6 echo "configure:5640: checking for moc" >&5 if test -n "$MOC"; then kde_cv_path="$MOC"; else kde_cache=`echo moc | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'kde_cv_path_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else kde_cv_path="NONE" dirs="$qt_bindirs" kde_save_IFS=$IFS IFS=':' for dir in $PATH; do dirs="$dirs $dir" done IFS=$kde_save_IFS for dir in $dirs; do if test -x "$dir/moc"; then if test -n "" then evalstr="$dir/moc 2>&1 " if eval $evalstr; then kde_cv_path="$dir/moc" break fi else kde_cv_path="$dir/moc" break fi fi done eval "kde_cv_path_$kde_cache=$kde_cv_path" fi eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" fi if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then echo "$ac_t""not found" 1>&6 { echo "configure: error: No Qt meta object compiler (moc) found! Please check whether you installed Qt correctly. You need to have a running moc binary. configure tried to run $ac_cv_path_moc and the test didn't succeed. If configure shouldn't have tried this one, set the environment variable MOC to the right one before running configure. " 1>&2; exit 1; } else echo "$ac_t""$kde_cv_path" 1>&6 MOC=$kde_cv_path fi if test -z "$UIC_NOT_NEEDED"; then echo $ac_n "checking for uic""... $ac_c" 1>&6 echo "configure:5706: checking for uic" >&5 if test -n "$UIC"; then kde_cv_path="$UIC"; else kde_cache=`echo uic | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'kde_cv_path_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else kde_cv_path="NONE" dirs="$qt_bindirs" kde_save_IFS=$IFS IFS=':' for dir in $PATH; do dirs="$dirs $dir" done IFS=$kde_save_IFS for dir in $dirs; do if test -x "$dir/uic"; then if test -n "" then evalstr="$dir/uic 2>&1 " if eval $evalstr; then kde_cv_path="$dir/uic" break fi else kde_cv_path="$dir/uic" break fi fi done eval "kde_cv_path_$kde_cache=$kde_cv_path" fi eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" fi if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then echo "$ac_t""not found" 1>&6 UIC="" else echo "$ac_t""$kde_cv_path" 1>&6 UIC=$kde_cv_path fi if test -z "$UIC" ; then echo "configure: warning: No Qt ui compiler (uic) found! Please check whether you installed Qt correctly. You need to have a running uic binary. configure tried to run $ac_cv_path_uic and the test didn't succeed. If configure shouldn't have tried this one, set the environment variable UIC to the right one before running configure. " 1>&2 exit 1 fi else UIC="echo uic not available: " fi LIB_QT="$kde_int_qt "'$(LIBPNG) $(LIBJPEG) -lXext $(LIB_X11) $(LIBSM)' echo $ac_n "checking for rpath""... $ac_c" 1>&6 echo "configure:5791: checking for rpath" >&5 # Check whether --enable-rpath or --disable-rpath was given. if test "${enable_rpath+set}" = set; then enableval="$enable_rpath" USE_RPATH=$enableval else USE_RPATH=yes fi if test -z "$KDE_RPATH" && test "$USE_RPATH" = "yes"; then KDE_RPATH="-R \$(kde_libraries)" if test -n "$qt_libraries"; then KDE_RPATH="$KDE_RPATH -R \$(qt_libraries)" fi if test -n "$X_LDFLAGS"; then KDE_RPATH="$KDE_RPATH -R \$(x_libraries)" fi if test -n "$KDE_EXTRA_RPATH"; then KDE_RPATH="$KDE_RPATH \$(KDE_EXTRA_RPATH)" fi fi echo "$ac_t""$USE_RPATH" 1>&6 echo $ac_n "checking for KDE""... $ac_c" 1>&6 echo "configure:5820: checking for KDE" >&5 if test "${prefix}" != NONE; then kde_includes=${prefix}/include ac_kde_includes=$prefix/include if test "${exec_prefix}" != NONE; then kde_libraries=${exec_prefix}/lib ac_kde_libraries=$exec_prefix/lib else kde_libraries=${prefix}/lib ac_kde_libraries=$prefix/lib fi else ac_kde_includes= ac_kde_libraries= kde_libraries="" kde_includes="" fi if eval "test \"`echo '$''{'ac_cv_have_kde'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else #try to guess kde locations if test "$kde_qtver" = 1; then kde_check_header="ksock.h" kde_check_lib="libkdecore.la" else kde_check_header="ksharedptr.h" kde_check_lib="libkio.la" fi if test -z ""; then kde_incdirs="/usr/lib/kde/include /usr/local/kde/include /usr/local/include /usr/kde/include /usr/include/kde /usr/include /opt/kde2/include /opt/kde/include $x_includes $qt_includes" test -n "$KDEDIR" && kde_incdirs="$KDEDIR/include $KDEDIR/include/kde $KDEDIR $kde_incdirs" kde_incdirs="$ac_kde_includes $kde_incdirs" kde_incdir=NO for i in $kde_incdirs; do for j in $kde_check_header; do if test -r "$i/$j"; then kde_incdir=$i break 2 fi done done ac_kde_includes="$kde_incdir" if test -n "$ac_kde_includes" && test ! -r "$ac_kde_includes/$kde_check_header"; then { echo "configure: error: in the prefix, you've chosen, are no KDE headers installed. This will fail. So, check this please and use another prefix!" 1>&2; exit 1; } fi kde_libdirs="/usr/lib/kde/lib /usr/local/kde/lib /usr/kde/lib /usr/lib/kde /usr/lib /usr/X11R6/lib /usr/local/lib /opt/kde2/lib /opt/kde/lib /usr/X11R6/kde/lib" test -n "$KDEDIR" && kde_libdirs="$KDEDIR/lib $KDEDIR $kde_libdirs" kde_libdirs="$ac_kde_libraries $kde_libdirs" kde_libdir=NO for i in $kde_libdirs; do for j in $kde_check_lib; do if test -r "$i/$j"; then kde_libdir=$i break 2 fi done done ac_kde_libraries="$kde_libdir" if test -n "$ac_kde_libraries" && test ! -r "$ac_kde_libraries/$kde_check_lib"; then { echo "configure: error: in the prefix, you've chosen, are no KDE libraries installed. This will fail. So, check this please and use another prefix!" 1>&2; exit 1; } fi ac_kde_libraries="$kde_libdir" if test "$ac_kde_includes" = NO || test "$ac_kde_libraries" = NO; then ac_cv_have_kde="have_kde=no" else ac_cv_have_kde="have_kde=yes \ ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries" fi else ac_cv_have_kde="have_kde=no" fi fi eval "$ac_cv_have_kde" if test "$have_kde" != "yes"; then if test "${prefix}" = NONE; then ac_kde_prefix="$ac_default_prefix" else ac_kde_prefix="$prefix" fi if test "$exec_prefix" = NONE; then ac_kde_exec_prefix="$ac_kde_prefix" echo "$ac_t""will be installed in $ac_kde_prefix" 1>&6 else ac_kde_exec_prefix="$exec_prefix" echo "$ac_t""will be installed in $ac_kde_prefix and $ac_kde_exec_prefix" 1>&6 fi kde_libraries="${ac_kde_exec_prefix}/lib" kde_includes=${ac_kde_prefix}/include else ac_cv_have_kde="have_kde=yes \ ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries" echo "$ac_t""libraries $ac_kde_libraries, headers $ac_kde_includes" 1>&6 kde_libraries="$ac_kde_libraries" kde_includes="$ac_kde_includes" fi if test "$kde_includes" = "$x_includes" || test "$kde_includes" = "$qt_includes" ; then KDE_INCLUDES="" else KDE_INCLUDES="-I$kde_includes" all_includes="$KDE_INCLUDES $all_includes" fi KDE_LDFLAGS="-L$kde_libraries" if test ! "$kde_libraries" = "$x_libraries" && test ! "$kde_libraries" = "$qt_libraries" ; then all_libraries="$all_libraries $KDE_LDFLAGS" fi all_libraries="$all_libraries $USER_LDFLAGS" all_includes="$all_includes $USER_INCLUDES" # Check whether --enable-path-check or --disable-path-check was given. if test "${enable_path_check+set}" = set; then enableval="$enable_path_check" if test "$enableval" = "no"; then ac_use_path_checking="default" else ac_use_path_checking="" fi else if test "$kde_qtver" = 1; then ac_use_path_checking="" else ac_use_path_checking="default" fi fi echo $ac_n "checking for KDE paths""... $ac_c" 1>&6 echo "configure:5996: checking for KDE paths" >&5 kde_result="" kde_cached_paths=yes if eval "test \"`echo '$''{'kde_cv_all_paths'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$ac_use_path_checking" = "default"; then if test -z "$kde_htmldir"; then kde_htmldir='\${prefix}/share/doc/HTML' fi if test -z "$kde_appsdir"; then kde_appsdir='\${prefix}/share/applnk' fi if test -z "$kde_icondir"; then kde_icondir='\${prefix}/share/icons' fi if test -z "$kde_sounddir"; then kde_sounddir='\${prefix}/share/sounds' fi if test -z "$kde_datadir"; then kde_datadir='\${prefix}/share/apps' fi if test -z "$kde_locale"; then kde_locale='\${prefix}/share/locale' fi if test -z "$kde_cgidir"; then kde_cgidir='\${exec_prefix}/cgi-bin' fi if test -z "$kde_confdir"; then kde_confdir='\${prefix}/share/config' fi if test -z "$kde_mimedir"; then kde_mimedir='\${prefix}/share/mimelnk' fi if test -z "$kde_toolbardir"; then kde_toolbardir='\${prefix}/share/toolbar' fi if test -z "$kde_wallpaperdir"; then kde_wallpaperdir='\${prefix}/share/wallpapers' fi if test -z "$kde_templatesdir"; then kde_templatesdir='\${prefix}/share/templates' fi if test -z "$kde_bindir"; then kde_bindir='\${exec_prefix}/bin' fi if test -z "$kde_servicesdir"; then kde_servicesdir='\${prefix}/share/services' fi if test -z "$kde_servicetypesdir"; then kde_servicetypesdir='\${prefix}/share/servicetypes' fi if test -z "$kde_moduledir"; then kde_moduledir='\${exec_prefix}/lib/kde2' fi kde_cv_all_paths="kde_have_all_paths=\"yes\" \ kde_htmldir=\"$kde_htmldir\" \ kde_appsdir=\"$kde_appsdir\" \ kde_icondir=\"$kde_icondir\" \ kde_sounddir=\"$kde_sounddir\" \ kde_datadir=\"$kde_datadir\" \ kde_locale=\"$kde_locale\" \ kde_cgidir=\"$kde_cgidir\" \ kde_confdir=\"$kde_confdir\" \ kde_mimedir=\"$kde_mimedir\" \ kde_toolbardir=\"$kde_toolbardir\" \ kde_wallpaperdir=\"$kde_wallpaperdir\" \ kde_templatesdir=\"$kde_templatesdir\" \ kde_bindir=\"$kde_bindir\" \ kde_servicesdir=\"$kde_servicesdir\" \ kde_servicetypesdir=\"$kde_servicetypesdir\" \ kde_moduledir=\"$kde_moduledir\" \ kde_result=defaults" else if test $kde_qtver = 1; then echo "$ac_t""compiling" 1>&6 echo $ac_n "checking for KDE headers installed""... $ac_c" 1>&6 echo "configure:6083: checking for KDE headers installed" >&5 ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cxx_cross ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cat > conftest.$ac_ext < #endif #include #include "confdefs.h" #include int main() { printf("kde_htmldir=\\"%s\\"\n", KApplication::kde_htmldir().data()); printf("kde_appsdir=\\"%s\\"\n", KApplication::kde_appsdir().data()); printf("kde_icondir=\\"%s\\"\n", KApplication::kde_icondir().data()); printf("kde_sounddir=\\"%s\\"\n", KApplication::kde_sounddir().data()); printf("kde_datadir=\\"%s\\"\n", KApplication::kde_datadir().data()); printf("kde_locale=\\"%s\\"\n", KApplication::kde_localedir().data()); printf("kde_cgidir=\\"%s\\"\n", KApplication::kde_cgidir().data()); printf("kde_confdir=\\"%s\\"\n", KApplication::kde_configdir().data()); printf("kde_mimedir=\\"%s\\"\n", KApplication::kde_mimedir().data()); printf("kde_toolbardir=\\"%s\\"\n", KApplication::kde_toolbardir().data()); printf("kde_wallpaperdir=\\"%s\\"\n", KApplication::kde_wallpaperdir().data()); printf("kde_bindir=\\"%s\\"\n", KApplication::kde_bindir().data()); printf("kde_partsdir=\\"%s\\"\n", KApplication::kde_partsdir().data()); printf("kde_servicesdir=\\"/tmp/dummy\\"\n"); printf("kde_servicetypesdir=\\"/tmp/dummy\\"\n"); printf("kde_moduledir=\\"/tmp/dummy\\"\n"); return 0; } EOF ac_compile='${CXX-g++} -c $CXXFLAGS $all_includes $CPPFLAGS conftest.$ac_ext' if { (eval echo configure:6126: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then echo "$ac_t""yes" 1>&6 else { echo "configure: error: your system is not able to compile a small KDE application! Check, if you installed the KDE header files correctly. For more details about this problem, look at the end of config.log." 1>&2; exit 1; } fi ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross KDE_TEST_RPATH= if test -n "$USE_RPATH"; then if test -n "$kde_libraries"; then KDE_TEST_RPATH="-R $kde_libraries" fi if test -n "$qt_libraries"; then KDE_TEST_RPATH="$KDE_TEST_RPATH -R $qt_libraries" fi if test -n "$x_libraries"; then KDE_TEST_RPATH="$KDE_TEST_RPATH -R $x_libraries" fi KDE_TEST_RPATH="$KDE_TEST_RPATH $KDE_EXTRA_RPATH" fi echo $ac_n "checking for KDE libraries installed""... $ac_c" 1>&6 echo "configure:6163: checking for KDE libraries installed" >&5 ac_link='$LIBTOOL_SHELL --silent --mode=link ${CXX-g++} -o conftest $CXXFLAGS $all_includes $CPPFLAGS $LDFLAGS $all_libraries conftest.$ac_ext $LIBS -lkdecore $LIBQT $KDE_TEST_RPATH 1>&5' if { (eval echo configure:6166: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then echo "$ac_t""yes" 1>&6 else { echo "configure: error: your system fails at linking a small KDE application! Check, if your compiler is installed correctly and if you have used the same compiler to compile Qt and kdelibs as you did use now. For more details about this problem, look at the end of config.log." 1>&2; exit 1; } fi if eval `KDEDIR= ./conftest 2>&5`; then kde_result=done else kde_result=problems fi KDEDIR= ./conftest 2> /dev/null >&5 # make an echo for config.log kde_have_all_paths=yes kde_cv_all_paths="kde_have_all_paths=\"yes\" \ kde_htmldir=\"$kde_htmldir\" \ kde_appsdir=\"$kde_appsdir\" \ kde_icondir=\"$kde_icondir\" \ kde_sounddir=\"$kde_sounddir\" \ kde_datadir=\"$kde_datadir\" \ kde_locale=\"$kde_locale\" \ kde_cgidir=\"$kde_cgidir\" \ kde_confdir=\"$kde_confdir\" \ kde_mimedir=\"$kde_mimedir\" \ kde_toolbardir=\"$kde_toolbardir\" \ kde_wallpaperdir=\"$kde_wallpaperdir\" \ kde_templatesdir=\"$kde_templatesdir\" \ kde_bindir=\"$kde_bindir\" \ kde_servicesdir=\"$kde_servicesdir\" \ kde_servicetypesdir=\"$kde_servicetypesdir\" \ kde_moduledir=\"$kde_moduledir\" \ kde_result=$kde_result" else { echo "configure: error: path checking not yet supported for KDE 2" 1>&2; exit 1; } fi fi kde_cached_paths=no fi eval "$kde_cv_all_paths" if test -z "$kde_htmldir" || test -z "$kde_appsdir" || test -z "$kde_icondir" || test -z "$kde_sounddir" || test -z "$kde_datadir" || test -z "$kde_locale" || test -z "$kde_cgidir" || test -z "$kde_confdir" || test -z "$kde_mimedir" || test -z "$kde_toolbardir" || test -z "$kde_wallpaperdir" || test -z "$kde_templatesdir" || test -z "$kde_bindir" || test -z "$kde_servicesdir" || test -z "$kde_servicetypesdir" || test -z "$kde_moduledir" || test "$kde_have_all_paths" != "yes"; then kde_have_all_paths=no fi if test "$kde_have_all_paths" = "no" && test "$kde_cached_paths" = "yes"; then # wrong values were cached, may be, we can set better ones kde_result= kde_htmldir= kde_appsdir= kde_icondir= kde_sounddir= kde_datadir= kde_locale= kde_cgidir= kde_confdir= kde_mimedir= kde_toolbardir= kde_wallpaperdir= kde_templatesdir= kde_bindir= kde_servicesdir= kde_servicetypesdir= kde_moduledir= kde_have_all_paths= if test "$ac_use_path_checking" = "default"; then if test -z "$kde_htmldir"; then kde_htmldir='\${prefix}/share/doc/HTML' fi if test -z "$kde_appsdir"; then kde_appsdir='\${prefix}/share/applnk' fi if test -z "$kde_icondir"; then kde_icondir='\${prefix}/share/icons' fi if test -z "$kde_sounddir"; then kde_sounddir='\${prefix}/share/sounds' fi if test -z "$kde_datadir"; then kde_datadir='\${prefix}/share/apps' fi if test -z "$kde_locale"; then kde_locale='\${prefix}/share/locale' fi if test -z "$kde_cgidir"; then kde_cgidir='\${exec_prefix}/cgi-bin' fi if test -z "$kde_confdir"; then kde_confdir='\${prefix}/share/config' fi if test -z "$kde_mimedir"; then kde_mimedir='\${prefix}/share/mimelnk' fi if test -z "$kde_toolbardir"; then kde_toolbardir='\${prefix}/share/toolbar' fi if test -z "$kde_wallpaperdir"; then kde_wallpaperdir='\${prefix}/share/wallpapers' fi if test -z "$kde_templatesdir"; then kde_templatesdir='\${prefix}/share/templates' fi if test -z "$kde_bindir"; then kde_bindir='\${exec_prefix}/bin' fi if test -z "$kde_servicesdir"; then kde_servicesdir='\${prefix}/share/services' fi if test -z "$kde_servicetypesdir"; then kde_servicetypesdir='\${prefix}/share/servicetypes' fi if test -z "$kde_moduledir"; then kde_moduledir='\${exec_prefix}/lib/kde2' fi kde_cv_all_paths="kde_have_all_paths=\"yes\" \ kde_htmldir=\"$kde_htmldir\" \ kde_appsdir=\"$kde_appsdir\" \ kde_icondir=\"$kde_icondir\" \ kde_sounddir=\"$kde_sounddir\" \ kde_datadir=\"$kde_datadir\" \ kde_locale=\"$kde_locale\" \ kde_cgidir=\"$kde_cgidir\" \ kde_confdir=\"$kde_confdir\" \ kde_mimedir=\"$kde_mimedir\" \ kde_toolbardir=\"$kde_toolbardir\" \ kde_wallpaperdir=\"$kde_wallpaperdir\" \ kde_templatesdir=\"$kde_templatesdir\" \ kde_bindir=\"$kde_bindir\" \ kde_servicesdir=\"$kde_servicesdir\" \ kde_servicetypesdir=\"$kde_servicetypesdir\" \ kde_moduledir=\"$kde_moduledir\" \ kde_result=defaults" else if test $kde_qtver = 1; then echo "$ac_t""compiling" 1>&6 echo $ac_n "checking for KDE headers installed""... $ac_c" 1>&6 echo "configure:6317: checking for KDE headers installed" >&5 ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cxx_cross ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cat > conftest.$ac_ext < #endif #include #include "confdefs.h" #include int main() { printf("kde_htmldir=\\"%s\\"\n", KApplication::kde_htmldir().data()); printf("kde_appsdir=\\"%s\\"\n", KApplication::kde_appsdir().data()); printf("kde_icondir=\\"%s\\"\n", KApplication::kde_icondir().data()); printf("kde_sounddir=\\"%s\\"\n", KApplication::kde_sounddir().data()); printf("kde_datadir=\\"%s\\"\n", KApplication::kde_datadir().data()); printf("kde_locale=\\"%s\\"\n", KApplication::kde_localedir().data()); printf("kde_cgidir=\\"%s\\"\n", KApplication::kde_cgidir().data()); printf("kde_confdir=\\"%s\\"\n", KApplication::kde_configdir().data()); printf("kde_mimedir=\\"%s\\"\n", KApplication::kde_mimedir().data()); printf("kde_toolbardir=\\"%s\\"\n", KApplication::kde_toolbardir().data()); printf("kde_wallpaperdir=\\"%s\\"\n", KApplication::kde_wallpaperdir().data()); printf("kde_bindir=\\"%s\\"\n", KApplication::kde_bindir().data()); printf("kde_partsdir=\\"%s\\"\n", KApplication::kde_partsdir().data()); printf("kde_servicesdir=\\"/tmp/dummy\\"\n"); printf("kde_servicetypesdir=\\"/tmp/dummy\\"\n"); printf("kde_moduledir=\\"/tmp/dummy\\"\n"); return 0; } EOF ac_compile='${CXX-g++} -c $CXXFLAGS $all_includes $CPPFLAGS conftest.$ac_ext' if { (eval echo configure:6360: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then echo "$ac_t""yes" 1>&6 else { echo "configure: error: your system is not able to compile a small KDE application! Check, if you installed the KDE header files correctly. For more details about this problem, look at the end of config.log." 1>&2; exit 1; } fi ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross KDE_TEST_RPATH= if test -n "$USE_RPATH"; then if test -n "$kde_libraries"; then KDE_TEST_RPATH="-R $kde_libraries" fi if test -n "$qt_libraries"; then KDE_TEST_RPATH="$KDE_TEST_RPATH -R $qt_libraries" fi if test -n "$x_libraries"; then KDE_TEST_RPATH="$KDE_TEST_RPATH -R $x_libraries" fi KDE_TEST_RPATH="$KDE_TEST_RPATH $KDE_EXTRA_RPATH" fi echo $ac_n "checking for KDE libraries installed""... $ac_c" 1>&6 echo "configure:6397: checking for KDE libraries installed" >&5 ac_link='$LIBTOOL_SHELL --silent --mode=link ${CXX-g++} -o conftest $CXXFLAGS $all_includes $CPPFLAGS $LDFLAGS $all_libraries conftest.$ac_ext $LIBS -lkdecore $LIBQT $KDE_TEST_RPATH 1>&5' if { (eval echo configure:6400: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then echo "$ac_t""yes" 1>&6 else { echo "configure: error: your system fails at linking a small KDE application! Check, if your compiler is installed correctly and if you have used the same compiler to compile Qt and kdelibs as you did use now. For more details about this problem, look at the end of config.log." 1>&2; exit 1; } fi if eval `KDEDIR= ./conftest 2>&5`; then kde_result=done else kde_result=problems fi KDEDIR= ./conftest 2> /dev/null >&5 # make an echo for config.log kde_have_all_paths=yes kde_cv_all_paths="kde_have_all_paths=\"yes\" \ kde_htmldir=\"$kde_htmldir\" \ kde_appsdir=\"$kde_appsdir\" \ kde_icondir=\"$kde_icondir\" \ kde_sounddir=\"$kde_sounddir\" \ kde_datadir=\"$kde_datadir\" \ kde_locale=\"$kde_locale\" \ kde_cgidir=\"$kde_cgidir\" \ kde_confdir=\"$kde_confdir\" \ kde_mimedir=\"$kde_mimedir\" \ kde_toolbardir=\"$kde_toolbardir\" \ kde_wallpaperdir=\"$kde_wallpaperdir\" \ kde_templatesdir=\"$kde_templatesdir\" \ kde_bindir=\"$kde_bindir\" \ kde_servicesdir=\"$kde_servicesdir\" \ kde_servicetypesdir=\"$kde_servicetypesdir\" \ kde_moduledir=\"$kde_moduledir\" \ kde_result=$kde_result" else { echo "configure: error: path checking not yet supported for KDE 2" 1>&2; exit 1; } fi fi eval "$kde_cv_all_paths" if test -z "$kde_htmldir" || test -z "$kde_appsdir" || test -z "$kde_icondir" || test -z "$kde_sounddir" || test -z "$kde_datadir" || test -z "$kde_locale" || test -z "$kde_cgidir" || test -z "$kde_confdir" || test -z "$kde_mimedir" || test -z "$kde_toolbardir" || test -z "$kde_wallpaperdir" || test -z "$kde_templatesdir" || test -z "$kde_bindir" || test -z "$kde_servicesdir" || test -z "$kde_servicetypesdir" || test -z "$kde_moduledir" || test "$kde_have_all_paths" != "yes"; then kde_have_all_paths=no fi kde_result="$kde_result (cache overridden)" fi if test "$kde_have_all_paths" = "no"; then { echo "configure: error: configure could not run a little KDE program to test the environment. Since it had compiled and linked before, it must be a strange problem on your system. Look at config.log for details. If you are not able to fix this, look at http://www.kde.org/faq/installation.html or any www.kde.org mirror. (If you're using an egcs version on Linux, you may update binutils!) " 1>&2; exit 1; } else rm -f conftest* echo "$ac_t""$kde_result" 1>&6 fi bindir=$kde_bindir kde_default_bindirs="/usr/bin /usr/local/bin /opt/local/bin /usr/X11R6/bin /opt/kde/bin /opt/kde2/bin /usr/kde/bin /usr/local/kde/bin" if test -n "$KDEDIRS"; then kde_save_IFS=$IFS IFS=: for dir in $KDEDIRS; do kde_default_bindirs="$dir/bin $kde_default_bindirs " done IFS=$kde_save_IFS fi kde_default_bindirs="$exec_prefix/bin $prefix/bin $kde_default_bindirs" echo $ac_n "checking for dcopidl""... $ac_c" 1>&6 echo "configure:6489: checking for dcopidl" >&5 if test -n "$DCOPIDL"; then kde_cv_path="$DCOPIDL"; else kde_cache=`echo dcopidl | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'kde_cv_path_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else kde_cv_path="NONE" dirs="$kde_default_bindirs" kde_save_IFS=$IFS IFS=':' for dir in $PATH; do dirs="$dirs $dir" done IFS=$kde_save_IFS for dir in $dirs; do if test -x "$dir/dcopidl"; then if test -n "" then evalstr="$dir/dcopidl 2>&1 " if eval $evalstr; then kde_cv_path="$dir/dcopidl" break fi else kde_cv_path="$dir/dcopidl" break fi fi done eval "kde_cv_path_$kde_cache=$kde_cv_path" fi eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" fi if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then echo "$ac_t""not found" 1>&6 { echo "configure: error: The important program dcopidl was not found! Please check whether you installed KDE correctly. " 1>&2; exit 1; } else echo "$ac_t""$kde_cv_path" 1>&6 DCOPIDL=$kde_cv_path fi echo $ac_n "checking for dcopidl2cpp""... $ac_c" 1>&6 echo "configure:6549: checking for dcopidl2cpp" >&5 if test -n "$DCOPIDL2CPP"; then kde_cv_path="$DCOPIDL2CPP"; else kde_cache=`echo dcopidl2cpp | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'kde_cv_path_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else kde_cv_path="NONE" dirs="$kde_default_bindirs" kde_save_IFS=$IFS IFS=':' for dir in $PATH; do dirs="$dirs $dir" done IFS=$kde_save_IFS for dir in $dirs; do if test -x "$dir/dcopidl2cpp"; then if test -n "" then evalstr="$dir/dcopidl2cpp 2>&1 " if eval $evalstr; then kde_cv_path="$dir/dcopidl2cpp" break fi else kde_cv_path="$dir/dcopidl2cpp" break fi fi done eval "kde_cv_path_$kde_cache=$kde_cv_path" fi eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" fi if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then echo "$ac_t""not found" 1>&6 { echo "configure: error: The important program dcopidl2cpp was not found! Please check whether you installed KDE correctly. " 1>&2; exit 1; } else echo "$ac_t""$kde_cv_path" 1>&6 DCOPIDL2CPP=$kde_cv_path fi echo $ac_n "checking for mcopidl""... $ac_c" 1>&6 echo "configure:6609: checking for mcopidl" >&5 if test -n "$MCOPIDL"; then kde_cv_path="$MCOPIDL"; else kde_cache=`echo mcopidl | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'kde_cv_path_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else kde_cv_path="NONE" dirs="$kde_default_bindirs" kde_save_IFS=$IFS IFS=':' for dir in $PATH; do dirs="$dirs $dir" done IFS=$kde_save_IFS for dir in $dirs; do if test -x "$dir/mcopidl"; then if test -n "" then evalstr="$dir/mcopidl 2>&1 " if eval $evalstr; then kde_cv_path="$dir/mcopidl" break fi else kde_cv_path="$dir/mcopidl" break fi fi done eval "kde_cv_path_$kde_cache=$kde_cv_path" fi eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" fi if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then echo "$ac_t""not found" 1>&6 { echo "configure: error: The important program mcopidl was not found! Please check whether you installed KDE correctly. " 1>&2; exit 1; } else echo "$ac_t""$kde_cv_path" 1>&6 MCOPIDL=$kde_cv_path fi echo $ac_n "checking for artsc-config""... $ac_c" 1>&6 echo "configure:6669: checking for artsc-config" >&5 if test -n "$ARTSCCONFIG"; then kde_cv_path="$ARTSCCONFIG"; else kde_cache=`echo artsc-config | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'kde_cv_path_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else kde_cv_path="NONE" dirs="$kde_default_bindirs" kde_save_IFS=$IFS IFS=':' for dir in $PATH; do dirs="$dirs $dir" done IFS=$kde_save_IFS for dir in $dirs; do if test -x "$dir/artsc-config"; then if test -n "" then evalstr="$dir/artsc-config 2>&1 " if eval $evalstr; then kde_cv_path="$dir/artsc-config" break fi else kde_cv_path="$dir/artsc-config" break fi fi done eval "kde_cv_path_$kde_cache=$kde_cv_path" fi eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" fi if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then echo "$ac_t""not found" 1>&6 { echo "configure: error: The important program artsc-config was not found! Please check whether you installed KDE correctly. " 1>&2; exit 1; } else echo "$ac_t""$kde_cv_path" 1>&6 ARTSCCONFIG=$kde_cv_path fi echo $ac_n "checking for kde-config""... $ac_c" 1>&6 echo "configure:6729: checking for kde-config" >&5 if test -n "$KDECONFIG"; then kde_cv_path="$KDECONFIG"; else kde_cache=`echo kde-config | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'kde_cv_path_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else kde_cv_path="NONE" dirs="$kde_default_bindirs" kde_save_IFS=$IFS IFS=':' for dir in $PATH; do dirs="$dirs $dir" done IFS=$kde_save_IFS for dir in $dirs; do if test -x "$dir/kde-config"; then if test -n "" then evalstr="$dir/kde-config 2>&1 " if eval $evalstr; then kde_cv_path="$dir/kde-config" break fi else kde_cv_path="$dir/kde-config" break fi fi done eval "kde_cv_path_$kde_cache=$kde_cv_path" fi eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" fi if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then echo "$ac_t""not found" 1>&6 else echo "$ac_t""$kde_cv_path" 1>&6 KDECONFIG=$kde_cv_path fi DCOP_DEPENDENCIES='$(DCOPIDL)' if test -x "$KDECONFIG"; then # it can be "compiled" kde_libs_prefix=`$KDECONFIG --prefix` if test -z "$kde_libs_prefix" || test ! -x "$kde_libs_prefix"; then { echo "configure: error: $KDECONFIG --prefix outputed the non existant prefix '$kde_libs_prefix' for kdelibs. This means it has been moved since you installed it. This won't work. Please recompile kdelibs for the new prefix. " 1>&2; exit 1; } fi kde_libs_htmldir=`$KDECONFIG --install html --expandvars` else kde_libs_prefix='$(prefix)' kde_libs_htmldir='$(kde_htmldir)' fi if test "$kde_qtver" = 1; then kde_minidir="$kde_icondir/mini" else # for KDE 1 - this breaks KDE2 apps using minidir, but # that's the plan ;-/ kde_minidir="/dev/null" fi if test $kde_qtver = 2; then LIB_KDECORE='-lkdecore' LIB_KDEUI='-lkdeui' LIB_KFORMULA='-lkformula' LIB_KIO='-lkio' LIB_KSYCOCA='-lksycoca' LIB_SMB='-lsmb' LIB_KFILE='-lkfile' LIB_KAB='-lkab' LIB_KHTML='-lkhtml' LIB_KSPELL='-lkspell' LIB_KPARTS='-lkparts' LIB_KWRITE='-lkwrite' else LIB_KDECORE='-lkdecore -lXext $(LIB_QT)' LIB_KDEUI='-lkdeui $(LIB_KDECORE)' LIB_KFM='-lkfm $(LIB_KDECORE)' LIB_KFILE='-lkfile $(LIB_KFM) $(LIB_KDEUI)' LIB_KAB='-lkab $(LIB_KIMGIO) $(LIB_KDECORE)' fi #MIN_CONFIG DO_NOT_COMPILE="$DO_NOT_COMPILE CVS debian bsd-port admin" if test ! -s $srcdir/subdirs; then TOPSUBDIRS="" files=`cd $srcdir && ls -1` dirs=`for i in $files; do if test -d $i; then echo $i; fi; done` for i in $dirs; do echo $i >> $srcdir/subdirs done fi if test -s $srcdir/inst-apps; then ac_topsubdirs="`cat $srcdir/inst-apps`" else ac_topsubdirs="`cat $srcdir/subdirs`" fi for i in $ac_topsubdirs; do echo $ac_n "checking if $i should be compiled""... $ac_c" 1>&6 echo "configure:6902: checking if $i should be compiled" >&5 if test -d $srcdir/$i; then install_it="yes" for j in $DO_NOT_COMPILE; do if test $i = $j; then install_it="no" fi done else install_it="no" fi echo "$ac_t""$install_it" 1>&6 if test $install_it = "yes"; then TOPSUBDIRS="$TOPSUBDIRS $i" fi done trap '' 1 2 15 cat > confcache <<\EOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs. It is not useful on other systems. # If it contains results you don't want to keep, you may remove or edit it. # # By default, configure uses ./config.cache as the cache file, # creating it if it does not exist already. You can give configure # the --cache-file=FILE option to use a different cache file; that is # what configure does when it calls configure scripts in # subdirectories, so they share the cache. # Giving --cache-file=/dev/null disables caching, for debugging configure. # config.status only pays attention to the cache file if you give it the # --recheck option to rerun configure. # EOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, don't put newlines in cache variables' values. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | case `(ac_space=' '; set | grep ac_space) 2>&1` in *ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote substitution # turns \\\\ into \\, and sed turns \\ into \). sed -n \ -e "s/'/'\\\\''/g" \ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" ;; *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' ;; esac >> confcache if cmp -s $cache_file confcache; then : else if test -w $cache_file; then echo "updating cache $cache_file" cat confcache > $cache_file else echo "not updating unwritable cache $cache_file" fi fi rm -f confcache trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' # Any assignment to VPATH causes Sun make to only execute # the first set of double-colon rules, so remove it if not needed. # If there is a colon in the path, we need to keep it. if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' fi trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 DEFS=-DHAVE_CONFIG_H # Without the "./", some shells look in PATH for config.status. : ${CONFIG_STATUS=./config.status} echo creating $CONFIG_STATUS rm -f $CONFIG_STATUS cat > $CONFIG_STATUS </dev/null | sed 1q`: # # $0 $ac_configure_args # # Compiler output produced by configure, useful for debugging # configure, is in ./config.log if it exists. ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" for ac_option do case "\$ac_option" in -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) echo "$CONFIG_STATUS generated by autoconf version 2.13" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; *) echo "\$ac_cs_usage"; exit 1 ;; esac done ac_given_srcdir=$srcdir ac_given_INSTALL="$INSTALL" trap 'rm -fr `echo "\ ./Makefile \ doc/Makefile \ doc/en/Makefile \ krootwarning/Makefile \ krootwarning/pics/Makefile \ po/Makefile \ config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 EOF cat >> $CONFIG_STATUS < conftest.subs <<\\CEOF $ac_vpsub $extrasub s%@SHELL@%$SHELL%g s%@CFLAGS@%$CFLAGS%g s%@CPPFLAGS@%$CPPFLAGS%g s%@CXXFLAGS@%$CXXFLAGS%g s%@FFLAGS@%$FFLAGS%g s%@DEFS@%$DEFS%g s%@LDFLAGS@%$LDFLAGS%g s%@LIBS@%$LIBS%g s%@exec_prefix@%$exec_prefix%g s%@prefix@%$prefix%g s%@program_transform_name@%$program_transform_name%g s%@bindir@%$bindir%g s%@sbindir@%$sbindir%g s%@libexecdir@%$libexecdir%g s%@datadir@%$datadir%g s%@sysconfdir@%$sysconfdir%g s%@sharedstatedir@%$sharedstatedir%g s%@localstatedir@%$localstatedir%g s%@libdir@%$libdir%g s%@includedir@%$includedir%g s%@oldincludedir@%$oldincludedir%g s%@infodir@%$infodir%g s%@mandir@%$mandir%g s%@host@%$host%g s%@host_alias@%$host_alias%g s%@host_cpu@%$host_cpu%g s%@host_vendor@%$host_vendor%g s%@host_os@%$host_os%g s%@target@%$target%g s%@target_alias@%$target_alias%g s%@target_cpu@%$target_cpu%g s%@target_vendor@%$target_vendor%g s%@target_os@%$target_os%g s%@build@%$build%g s%@build_alias@%$build_alias%g s%@build_cpu@%$build_cpu%g s%@build_vendor@%$build_vendor%g s%@build_os@%$build_os%g s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g s%@INSTALL_DATA@%$INSTALL_DATA%g s%@PACKAGE@%$PACKAGE%g s%@VERSION@%$VERSION%g s%@ACLOCAL@%$ACLOCAL%g s%@AUTOCONF@%$AUTOCONF%g s%@AUTOMAKE@%$AUTOMAKE%g s%@AUTOHEADER@%$AUTOHEADER%g s%@MAKEINFO@%$MAKEINFO%g s%@SET_MAKE@%$SET_MAKE%g s%@CONF_FILES@%$CONF_FILES%g s%@CC@%$CC%g s%@CXX@%$CXX%g s%@USE_EXCEPTIONS@%$USE_EXCEPTIONS%g s%@USE_RTTI@%$USE_RTTI%g s%@CXXCPP@%$CXXCPP%g s%@NOOPT_CXXFLAGS@%$NOOPT_CXXFLAGS%g s%@REPO@%$REPO%g s%@NOREPO@%$NOREPO%g s%@KDE_USE_FINAL_TRUE@%$KDE_USE_FINAL_TRUE%g s%@KDE_USE_FINAL_FALSE@%$KDE_USE_FINAL_FALSE%g s%@KDE_USE_CLOSURE_TRUE@%$KDE_USE_CLOSURE_TRUE%g s%@KDE_USE_CLOSURE_FALSE@%$KDE_USE_CLOSURE_FALSE%g s%@KDE_CXXFLAGS@%$KDE_CXXFLAGS%g s%@OBJEXT@%$OBJEXT%g s%@EXEEXT@%$EXEEXT%g s%@LN_S@%$LN_S%g s%@RANLIB@%$RANLIB%g s%@STRIP@%$STRIP%g s%@LIBTOOL@%$LIBTOOL%g s%@KDE_PLUGIN@%$KDE_PLUGIN%g s%@MSGFMT@%$MSGFMT%g s%@GMSGFMT@%$GMSGFMT%g s%@XGETTEXT@%$XGETTEXT%g s%@CPP@%$CPP%g s%@LIBCOMPAT@%$LIBCOMPAT%g s%@LIBCRYPT@%$LIBCRYPT%g s%@LIBSOCKET@%$LIBSOCKET%g s%@X_EXTRA_LIBS@%$X_EXTRA_LIBS%g s%@LIBUCB@%$LIBUCB%g s%@LIBDL@%$LIBDL%g s%@X_INCLUDES@%$X_INCLUDES%g s%@X_LDFLAGS@%$X_LDFLAGS%g s%@x_libraries@%$x_libraries%g s%@x_includes@%$x_includes%g s%@LIBSM@%$LIBSM%g s%@X_PRE_LIBS@%$X_PRE_LIBS%g s%@LIB_X11@%$LIB_X11%g s%@LIBXINERAMA@%$LIBXINERAMA%g s%@USER_INCLUDES@%$USER_INCLUDES%g s%@USER_LDFLAGS@%$USER_LDFLAGS%g s%@LIBZ@%$LIBZ%g s%@LIBPNG@%$LIBPNG%g s%@LIBJPEG@%$LIBJPEG%g s%@qt_libraries@%$qt_libraries%g s%@qt_includes@%$qt_includes%g s%@QT_INCLUDES@%$QT_INCLUDES%g s%@QT_LDFLAGS@%$QT_LDFLAGS%g s%@MOC@%$MOC%g s%@UIC@%$UIC%g s%@LIB_QT@%$LIB_QT%g s%@KDE_EXTRA_RPATH@%$KDE_EXTRA_RPATH%g s%@KDE_RPATH@%$KDE_RPATH%g s%@kde_libraries@%$kde_libraries%g s%@kde_includes@%$kde_includes%g s%@KDE_LDFLAGS@%$KDE_LDFLAGS%g s%@KDE_INCLUDES@%$KDE_INCLUDES%g s%@all_includes@%$all_includes%g s%@all_libraries@%$all_libraries%g s%@AUTODIRS@%$AUTODIRS%g s%@DCOPIDL@%$DCOPIDL%g s%@DCOPIDL2CPP@%$DCOPIDL2CPP%g s%@DCOP_DEPENDENCIES@%$DCOP_DEPENDENCIES%g s%@MCOPIDL@%$MCOPIDL%g s%@ARTSCCONFIG@%$ARTSCCONFIG%g s%@KDECONFIG@%$KDECONFIG%g s%@kde_libs_prefix@%$kde_libs_prefix%g s%@kde_libs_htmldir@%$kde_libs_htmldir%g s%@kde_htmldir@%$kde_htmldir%g s%@kde_appsdir@%$kde_appsdir%g s%@kde_icondir@%$kde_icondir%g s%@kde_sounddir@%$kde_sounddir%g s%@kde_datadir@%$kde_datadir%g s%@kde_locale@%$kde_locale%g s%@kde_confdir@%$kde_confdir%g s%@kde_mimedir@%$kde_mimedir%g s%@kde_wallpaperdir@%$kde_wallpaperdir%g s%@kde_bindir@%$kde_bindir%g s%@kde_templatesdir@%$kde_templatesdir%g s%@kde_servicesdir@%$kde_servicesdir%g s%@kde_servicetypesdir@%$kde_servicetypesdir%g s%@kde_moduledir@%$kde_moduledir%g s%@LIB_KDECORE@%$LIB_KDECORE%g s%@LIB_KDEUI@%$LIB_KDEUI%g s%@LIB_KFORMULA@%$LIB_KFORMULA%g s%@LIB_KIO@%$LIB_KIO%g s%@LIB_KSYCOCA@%$LIB_KSYCOCA%g s%@LIB_SMB@%$LIB_SMB%g s%@LIB_KFILE@%$LIB_KFILE%g s%@LIB_KAB@%$LIB_KAB%g s%@LIB_KHTML@%$LIB_KHTML%g s%@LIB_KSPELL@%$LIB_KSPELL%g s%@LIB_KPARTS@%$LIB_KPARTS%g s%@LIB_KWRITE@%$LIB_KWRITE%g s%@LIB_KFM@%$LIB_KFM%g s%@TOPSUBDIRS@%$TOPSUBDIRS%g CEOF EOF cat >> $CONFIG_STATUS <<\EOF # Split the substitutions into bite-sized pieces for seds with # small command number limits, like on Digital OSF/1 and HP-UX. ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. ac_file=1 # Number of current file. ac_beg=1 # First line for current file. ac_end=$ac_max_sed_cmds # Line after last line for current file. ac_more_lines=: ac_sed_cmds="" while $ac_more_lines; do if test $ac_beg -gt 1; then sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file else sed "${ac_end}q" conftest.subs > conftest.s$ac_file fi if test ! -s conftest.s$ac_file; then ac_more_lines=false rm -f conftest.s$ac_file else if test -z "$ac_sed_cmds"; then ac_sed_cmds="sed -f conftest.s$ac_file" else ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" fi ac_file=`expr $ac_file + 1` ac_beg=$ac_end ac_end=`expr $ac_end + $ac_max_sed_cmds` fi done if test -z "$ac_sed_cmds"; then ac_sed_cmds=cat fi EOF cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case "$ac_file" in *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; *) ac_file_in="${ac_file}.in" ;; esac # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. # Remove last slash and all that follows it. Not all systems have dirname. ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then # The file is in a subdirectory. test ! -d "$ac_dir" && mkdir "$ac_dir" ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" # A "../" for each directory in $ac_dir_suffix. ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` else ac_dir_suffix= ac_dots= fi case "$ac_given_srcdir" in .) srcdir=. if test -z "$ac_dots"; then top_srcdir=. else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; *) # Relative path. srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" top_srcdir="$ac_dots$ac_given_srcdir" ;; esac case "$ac_given_INSTALL" in [/$]*) INSTALL="$ac_given_INSTALL" ;; "") ;; *) INSTALL="$ac_dots$ac_given_INSTALL" ;; esac echo creating "$ac_file" rm -f "$ac_file" configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." case "$ac_file" in *Makefile*) ac_comsub="1i\\ # $configure_input" ;; *) ac_comsub= ;; esac ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` sed -e "$ac_comsub s%@configure_input@%$configure_input%g s%@srcdir@%$srcdir%g s%@top_srcdir@%$top_srcdir%g s%@INSTALL@%$INSTALL%g " $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file fi; done rm -f conftest.s* # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where # NAME is the cpp macro being defined and VALUE is the value it is being given. # # ac_d sets the value in "#define NAME VALUE" lines. ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)' ac_dB='\([ ][ ]*\)[^ ]*%\1#\2' ac_dC='\3' ac_dD='%g' # ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE". ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' ac_uB='\([ ]\)%\1#\2define\3' ac_uC=' ' ac_uD='\4%g' # ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE". ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' ac_eB='$%\1#\2define\3' ac_eC=' ' ac_eD='%g' if test "${CONFIG_HEADERS+set}" != set; then EOF cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF fi for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case "$ac_file" in *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; *) ac_file_in="${ac_file}.in" ;; esac echo creating $ac_file rm -f conftest.frag conftest.in conftest.out ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` cat $ac_file_inputs > conftest.in EOF # Transform confdefs.h into a sed script conftest.vals that substitutes # the proper values into config.h.in to produce config.h. And first: # Protect against being on the right side of a sed subst in config.status. # Protect against being in an unquoted here document in config.status. rm -f conftest.vals cat > conftest.hdr <<\EOF s/[\\&%]/\\&/g s%[\\$`]%\\&%g s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp s%ac_d%ac_u%gp s%ac_u%ac_e%gp EOF sed -n -f conftest.hdr confdefs.h > conftest.vals rm -f conftest.hdr # This sed command replaces #undef with comments. This is necessary, for # example, in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. cat >> conftest.vals <<\EOF s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */% EOF # Break up conftest.vals because some shells have a limit on # the size of here documents, and old seds have small limits too. rm -f conftest.tail while : do ac_lines=`grep -c . conftest.vals` # grep -c gives empty output for an empty file on some AIX systems. if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi # Write a limited-size here document to conftest.frag. echo ' cat > conftest.frag <> $CONFIG_STATUS sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS echo 'CEOF sed -f conftest.frag conftest.in > conftest.out rm -f conftest.in mv conftest.out conftest.in ' >> $CONFIG_STATUS sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail rm -f conftest.vals mv conftest.tail conftest.vals done rm -f conftest.vals cat >> $CONFIG_STATUS <<\EOF rm -f conftest.frag conftest.h echo "/* $ac_file. Generated automatically by configure. */" > conftest.h cat conftest.in >> conftest.h rm -f conftest.in if cmp -s $ac_file conftest.h 2>/dev/null; then echo "$ac_file is unchanged" rm -f conftest.h else # Remove last slash and all that follows it. Not all systems have dirname. ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then # The file is in a subdirectory. test ! -d "$ac_dir" && mkdir "$ac_dir" fi rm -f $ac_file mv conftest.h $ac_file fi fi; done EOF cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h exit 0 EOF if test "x$with_fast_perl" = "xyes" ; then perl -i.bak $ac_aux_dir/conf.change.pl $CONFIG_STATUS || mv $CONFIG_STATUS.bak $CONFIG_STATUS; rm -f $CONFIG_STATUS.bak; fi chmod +x $CONFIG_STATUS rm -fr confdefs* $ac_clean_files test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1