summaryrefslogtreecommitdiffstats
path: root/help-install/mr
diff options
context:
space:
mode:
Diffstat (limited to 'help-install/mr')
-rw-r--r--help-install/mr/main.html103
-rw-r--r--help-install/mr/main::bits.html7
-rw-r--r--help-install/mr/main::driverupdate.html14
-rw-r--r--help-install/mr/main::failsafe.html11
-rw-r--r--help-install/mr/main::firmware.html9
-rw-r--r--help-install/mr/main::harddisk.html16
-rw-r--r--help-install/mr/main::help.html25
-rw-r--r--help-install/mr/main::install_src.html12
-rw-r--r--help-install/mr/main::keytable.html7
-rw-r--r--help-install/mr/main::linux.html10
-rw-r--r--help-install/mr/main::memtest.html14
-rw-r--r--help-install/mr/main::noacpi.html24
-rw-r--r--help-install/mr/main::nolapic.html14
-rw-r--r--help-install/mr/main::opt.html28
-rw-r--r--help-install/mr/main::opt::network.html35
-rw-r--r--help-install/mr/main::opt::o_acpi.html23
-rw-r--r--help-install/mr/main::opt::o_apm.html21
-rw-r--r--help-install/mr/main::opt::o_ide.html12
-rw-r--r--help-install/mr/main::opt::o_install.html30
-rw-r--r--help-install/mr/main::opt::o_splash.html12
-rw-r--r--help-install/mr/main::opt::o_vnc.html18
-rw-r--r--help-install/mr/main::rescue.html10
-rw-r--r--help-install/mr/main::videomode.html18
-rw-r--r--help-install/mr/navi.html1
24 files changed, 474 insertions, 0 deletions
diff --git a/help-install/mr/main.html b/help-install/mr/main.html
new file mode 100644
index 0000000..5ee559f
--- /dev/null
+++ b/help-install/mr/main.html
@@ -0,0 +1,103 @@
+<h3>
+<a name="main">बूट लोडर मदत</a>
+</h3>
+
+<p>
+Welcome to <em>@@@product@@@</em>
+</p>
+
+<p>
+Use this menu to select the desired function. If you have
+problems navigating in this help system, press
+<em>@@@fkey_help@@@</em> to enter the <a href="#help">वर्णन</a> of the help
+system. The main functions in this menu are:
+</p>
+
+<p>
+<a href="#harddisk">हार्ड डिस्कमधून बूट करा</a>: This selection will not do
+anything to the system. It only starts a previously installed
+operating system.
+</p>
+
+<p>
+<a href="#linux">स्थापना</a>:
+This installation mode works on most machines. If you experience a
+system freeze during boot or problems with detection of your hardware
+components, such as disk controllers or network cards, try one of the
+following installation options.
+</p>
+
+<p>
+<a href="#noacpi">स्थापना--एसीपीआय अक्षम</a>: Many of the
+currently-sold computers have incomplete or faulty ACPI
+implementations. This selection disables ACPI support in the
+kernel, but still enables many performance features, like DMA for IDE
+hard disks.
+</p>
+
+<p>
+<a href="#nolapic"> स्थापना—एपीआयसी अक्षम </a>:
+If the normal installation fails, this might be due to the
+system hardware not supporting local APIC.
+If this seems to be the case, use this option to
+install without local APIC support.
+</p>
+
+<p>
+<a href="#failsafe"> स्थापना – सुरक्षित सेटिंग्स </a>: If you were not
+successful with <em>स्थापना</em>, this selection might
+solve the issue.
+</p>
+
+<p>
+<a href="#rescue">बचाव प्रणाली</a>: This boot image starts a small
+Linux system in RAM. This is useful if the system does not start properly.
+After booting this system, log in as root.
+</p>
+
+<p>
+<a href="#firmware">फर्मवेअर चाचणी</a>: Runs a BIOS test tool that validates
+ACPI and other parts of your BIOS.
+</p>
+
+<p>
+<a href="#memtest">स्मरण चाचणी </a>: Memory testing is useful for more than
+checking installation of new memory modules. It is a stress test
+for a big part of your computer system and may indicate hardware
+problems.
+</p>
+
+<p>
+<a href="#opt">बूट विकल्प</a>: The boot options may change the
+behavior of your system completely. They are settings for
+the kernel.
+</p>
+
+<p>
+<a href="#help">@@@fkey_help@@@ Help</a>: This is context sensitive. It will
+show different screens depending on the active element of the
+boot screen. There is also a description of this help system
+available.
+</p>
+
+<p>
+<a href="#keytable">@@@fkey_lang@@@</a>: Set language and keyboard mapping
+used by the boot loader.
+</p>
+
+<p>
+<a href="#videomode">@@@fkey_video@@@ Video Mode</a>: Here, choose between
+different screen resolutions while installing. If you encounter
+problems with the graphical installation, the <em>अक्षर स्थिती </em> may
+be a work-around for you.
+</p>
+
+<p>
+<a href="#install_src">@@@fkey_inst@@@ Installation Source</a>: Choose the
+installation source.
+</p>
+
+<p>
+<a href="#driverupdate">@@@fkey_dud@@@ Driver Update</a>: For very new machines, a
+driver update may be needed to install the system.
+</p>
diff --git a/help-install/mr/main::bits.html b/help-install/mr/main::bits.html
new file mode 100644
index 0000000..f246418
--- /dev/null
+++ b/help-install/mr/main::bits.html
@@ -0,0 +1,7 @@
+<h3>
+<a name="bits">सोफ्टवेयर प्रकार निवड</a>
+</h3>
+
+<p>
+You have the choice to install the 32-bit or 64-bit version of @@@product@@@.
+</p>
diff --git a/help-install/mr/main::driverupdate.html b/help-install/mr/main::driverupdate.html
new file mode 100644
index 0000000..5a5afad
--- /dev/null
+++ b/help-install/mr/main::driverupdate.html
@@ -0,0 +1,14 @@
+<h3>
+<a name="driverupdate">ड्रायव्हर अद्ययावत</a>
+</h3>
+
+<p>
+If you need a driver update floppy or CD-ROM, press <em>@@@fkey_dud@@@</em>. The
+boot loader asks you to insert the driver update medium after
+loading the Linux kernel.
+</p>
+
+<p>
+A driver update is typically a floppy with new versions of hardware
+drivers or bug fixes needed during installation.
+</p>
diff --git a/help-install/mr/main::failsafe.html b/help-install/mr/main::failsafe.html
new file mode 100644
index 0000000..c6df55b
--- /dev/null
+++ b/help-install/mr/main::failsafe.html
@@ -0,0 +1,11 @@
+<h3>
+<a name="failsafe"> स्थापना – सुरक्षित सेटिंग्स </a>
+</h3>
+
+<p>
+Select <em> स्थापना – सुरक्षित सेटिंग्स </em> if you encounter hangs
+while installing or irreproducible errors. This option disables DMA
+for IDE drives and all power management features.
+See also the kernel options for <a href="#o_apm">एपिएम</a>,
+<a href="#o_acpi"> एसिपिआई </a> and <a href="#o_ide">आईडिई</a>.
+</p>
diff --git a/help-install/mr/main::firmware.html b/help-install/mr/main::firmware.html
new file mode 100644
index 0000000..059d227
--- /dev/null
+++ b/help-install/mr/main::firmware.html
@@ -0,0 +1,9 @@
+<h3>
+<a name="firmware">फर्मवेअर चाचणी</a>
+</h3>
+
+<p>
+Starts a BIOS checker that validates the ACPI tables
+and many other parts of your BIOS.
+Test results can be stored on usb disk or saved via network.
+</p>
diff --git a/help-install/mr/main::harddisk.html b/help-install/mr/main::harddisk.html
new file mode 100644
index 0000000..f732d04
--- /dev/null
+++ b/help-install/mr/main::harddisk.html
@@ -0,0 +1,16 @@
+<h3>
+<a name="harddisk">हार्ड डिस्कमधून बूट करा</a>
+</h3>
+
+<p>
+Select <em> बूट स्थापना ओएस </em> to start the system installed on
+your local hard disk. This system must be installed properly, because
+only the MBR (Master Boot Record) on the first hard disk is started.
+The device ID of the first hard disk is provided by the BIOS of
+the computer.
+</p>
+
+<p>
+Use this if you forgot to remove the CD or DVD from your
+drive and want to start the computer from the hard disk.
+</p>
diff --git a/help-install/mr/main::help.html b/help-install/mr/main::help.html
new file mode 100644
index 0000000..f02a542
--- /dev/null
+++ b/help-install/mr/main::help.html
@@ -0,0 +1,25 @@
+<h3>
+<a name="help">मदत प्रणाली वापरताना</a>
+</h3>
+
+<p>
+The boot loader online help is context sensitive. It gives information
+about the selected menu item or, if you are editing boot options,
+it tries to look up information about the option in which the cursor is
+positioned.
+</p>
+
+<p>
+Navigation Keys
+<ul>
+ <li><em>ऊर्ध्वगामी बाण</em>: highlight previous link</li>
+ <li><em>अधोगामी बाण</em>: highlight next link</li>
+ <li><em>डावा बाण</em>, <em>बेकस्पेस</em>: return to previous topic</li>
+ <li><em>उजवा बाण</em>, <em>एन्टर</em>, <em>जागा</em>: follow link</li>
+ <li><em>पान वर</em>: scroll up one page</li>
+ <li><em>पान खाली</em>: scroll down one page</li>
+ <li><em>होम</em>: go to page start</li>
+ <li><em>एन्ड</em>: go to page end</li>
+ <li><em>एस्केप</em>: leave help</li>
+</ul>
+</p>
diff --git a/help-install/mr/main::install_src.html b/help-install/mr/main::install_src.html
new file mode 100644
index 0000000..71d72b6
--- /dev/null
+++ b/help-install/mr/main::install_src.html
@@ -0,0 +1,12 @@
+<h3>
+<a name="install_src"> स्थापना स्त्रोत</a>
+</h3>
+
+<p>
+Press <em>@@@fkey_inst@@@</em> to choose an installation source.
+</p>
+
+<p>
+This is the same as using the <a href="#o_install"> स्थापना </a>
+boot option.
+</p>
diff --git a/help-install/mr/main::keytable.html b/help-install/mr/main::keytable.html
new file mode 100644
index 0000000..9e45beb
--- /dev/null
+++ b/help-install/mr/main::keytable.html
@@ -0,0 +1,7 @@
+<h3>
+<a name="keytable">भाषा व किबोर्ड रचना निवड</a>
+</h3>
+
+<p>
+Press <em>@@@fkey_lang@@@</em> to change language and keyboard layout the boot loader uses.
+</p>
diff --git a/help-install/mr/main::linux.html b/help-install/mr/main::linux.html
new file mode 100644
index 0000000..a5599fb
--- /dev/null
+++ b/help-install/mr/main::linux.html
@@ -0,0 +1,10 @@
+<h3>
+<a name="linux">स्थापना</a>
+</h3>
+
+<p>
+Select <em>स्थापना</em> to start the default installation. The
+<a href="#opt">बूट विकल्प</a> entered are used in the
+start-up. This item activates many features of commonly available
+hardware.
+</p>
diff --git a/help-install/mr/main::memtest.html b/help-install/mr/main::memtest.html
new file mode 100644
index 0000000..61dd0a1
--- /dev/null
+++ b/help-install/mr/main::memtest.html
@@ -0,0 +1,14 @@
+<h3>
+<a name="memtest">स्मरण चाचणी </a>
+</h3>
+
+<p>
+The included <em>स्मरण चाचणी </em> provides good possibilities to
+stress test the hardware of a system. Its main purpose is to detect
+broken RAM, but it also stresses many other parts of the system.
+</p>
+
+<p>
+There is no guarantee that the memory is good if no errors are
+found, although most of memory defects will be found.
+</p>
diff --git a/help-install/mr/main::noacpi.html b/help-install/mr/main::noacpi.html
new file mode 100644
index 0000000..5a3f3a1
--- /dev/null
+++ b/help-install/mr/main::noacpi.html
@@ -0,0 +1,24 @@
+<h3>
+<a name="noacpi">स्थापना--एसीपीआय अक्षम</a>
+</h3>
+
+<p>
+Current hardware usually requires ACPI (Advanced Configuration and Power Interface)
+to control the interrupt handling.
+ACPI completely replaces the old APM system.
+</p>
+
+<p>
+Select <em>स्थापना--एसीपीआय अक्षम</em> if you encounter
+problems during boot of the kernel. Known problems with machines that
+have problems with ACPI are:
+<ul>
+ <li>kernel freezes when booting</li>
+ <li>PCI Cards are not detected or initialized properly</li>
+</ul>
+</p>
+
+<p>
+You may also try the <a href="#firmware">फर्मवेअर चाचणी</a> boot option
+and look at the test results of the ACPI validation.
+</p>
diff --git a/help-install/mr/main::nolapic.html b/help-install/mr/main::nolapic.html
new file mode 100644
index 0000000..2538c63
--- /dev/null
+++ b/help-install/mr/main::nolapic.html
@@ -0,0 +1,14 @@
+<h3>
+<a name="nolapic"> स्थापना—एपीआयसी अक्षम </a>
+</h3>
+
+<p>
+Normally there are no problems with the APIC (Advanced Programmable Interrupt
+Controller). But if you seem to have some, try this option to boot
+without local APIC support.
+</p>
+
+<p>
+Please don't confuse this with <a href="#noacpi">एसिपिआई</a>
+(Advanced Configuration and Power Interface).
+</p>
diff --git a/help-install/mr/main::opt.html b/help-install/mr/main::opt.html
new file mode 100644
index 0000000..74c4ee8
--- /dev/null
+++ b/help-install/mr/main::opt.html
@@ -0,0 +1,28 @@
+<h3>
+<a name="opt">बूट विकल्प</a>
+</h3>
+
+<p>
+There are two types of boot options available. First, there are
+options that affect the installer. Second, there are kernel
+options. Some of the more common options are:
+</p>
+
+<p>
+a) installer options
+<ul>
+ <li><a href="#o_install"> स्थापना </a> -- select an installation source</li>
+ <li><a href="#network">नेटवर्क विकल्प </a> -- the network options</li>
+ <li><a href="#o_vnc"> विएनसि विकल्प </a> -- options for installation via VNC</li>
+</ul>
+</p>
+
+<p>
+b) kernel options
+<ul>
+ <li><a href="#o_splash">स्प्लेश</a> -- influence the behavior of the splash screen</li>
+ <li><a href="#o_apm">एपिएम</a> -- toggle power management</li>
+ <li><a href="#o_acpi"> एसिपिआई </a> -- advanced configuration and power interface</li>
+ <li><a href="#o_ide">आईडिई</a> -- control the IDE subsystem</li>
+</ul>
+</p>
diff --git a/help-install/mr/main::opt::network.html b/help-install/mr/main::opt::network.html
new file mode 100644
index 0000000..f9d479b
--- /dev/null
+++ b/help-install/mr/main::opt::network.html
@@ -0,0 +1,35 @@
+<a name="o_hostip"/>
+<a name="o_netmask"/>
+<a name="o_gateway"/>
+
+<h3>
+<a name="network"> स्थापनेचे विकल्प : नेटवर्क विकल्प </a>
+</h3>
+
+<p>
+It is possible to configure the network interface right now. The
+hardware will be detected later by YaST2. The minimum set of options
+to configure your network card consists of host IP and netmask. For
+example:
+<ul>
+ <li>होस्टाआइपि=१९२.१६८.०.१० नेट्मास्क्= २५५.२५५.२५५.०</li>
+</ul>
+</p>
+
+<p>
+or in a shorter form:
+<ul>
+ <li> होस्टाआइपि=१९२.१६८.०.१० </li>
+</ul>
+</p>
+
+<p>
+If you specified a <a href="#o_install"> नेटवर्क बेस्ड स्थापना </a> and do
+not specify both of these options, the installer tries to configure
+the network interface with <em>डिएचसिपि</em>. If you need a default
+gateway, specify this with the option <em>गेटवे</em>. For
+example:
+<ul>
+ <li>गेटवे= १९२.१६८.०.१० </li>
+</ul>
+</p>
diff --git a/help-install/mr/main::opt::o_acpi.html b/help-install/mr/main::opt::o_acpi.html
new file mode 100644
index 0000000..2e29a39
--- /dev/null
+++ b/help-install/mr/main::opt::o_acpi.html
@@ -0,0 +1,23 @@
+<h3>
+<a name="o_acpi">केर्नल विकल्प = एसिपिआइ</a>
+</h3>
+
+<p>
+ACPI (Advanced Configuration and Power Interface) is a
+standard that defines power and configuration management interfaces
+between an operating system and the BIOS. By default, <em> एसिपिआई </em> is
+switched on when a BIOS is detected that is newer than from year
+2000. There are several commonly
+used parameters to control the behavior of ACPI:
+<ul>
+ <li><em>पिसिआइ=नो एसिपिआइ </em> -- do not use ACPI to route PCI interrupts</li>
+ <li><em> एसिपिआइ = ओल्ड बूट</em> -- only the parts of ACPI that are relevant for booting remain activated</li>
+ <li><em> एसिपिआइ = ओफ</em> -- switch off ACPI completely</li>
+ <li><em> एसिपिआइ =फोर्स</em> -- switch on ACPI even if your BIOS is dated before 2000</li>
+</ul>
+</p>
+
+<p>
+Especially on new computers, it replaces the old
+<a href="#o_apm">एपिएम</a> system.
+</p>
diff --git a/help-install/mr/main::opt::o_apm.html b/help-install/mr/main::opt::o_apm.html
new file mode 100644
index 0000000..68409e7
--- /dev/null
+++ b/help-install/mr/main::opt::o_apm.html
@@ -0,0 +1,21 @@
+<h3>
+<a name="o_apm"> केर्नल विकल्प: एपिएम</a>
+</h3>
+
+<p>
+APM is one of the two power management strategies used on current
+computers. It is mainly used with laptops for functions like suspend
+to disk, but it may also be responsible for switching off the
+computer after power down. APM relies on a correct working BIOS. If
+the BIOS is broken, APM may have only limited use or even prevent the
+computer from working. Therefore, it may be switched off with the
+parameter
+<ul>
+ <li><em> एपिएम = ओफ</em> -- switch off APM completely</li>
+</ul>
+</p>
+
+<p>
+Some very new computers may take more advantage from the newer
+<a href="#o_acpi">एसिपिआई</a>.
+</p>
diff --git a/help-install/mr/main::opt::o_ide.html b/help-install/mr/main::opt::o_ide.html
new file mode 100644
index 0000000..d5234a6
--- /dev/null
+++ b/help-install/mr/main::opt::o_ide.html
@@ -0,0 +1,12 @@
+<h3>
+<a name="o_ide"> केर्नल विकल्प = आइडिई </a>
+</h3>
+
+<p>
+IDE is, unlike SCSI, commonly used in most desktop workstations.
+To circumvent some hardware problems that occur with IDE systems, use the
+kernel parameter:
+<ul>
+ <li><em> आइडिई नोडिएमए</em> -- switch off DMA for IDE drives</li>
+</ul>
+</p>
diff --git a/help-install/mr/main::opt::o_install.html b/help-install/mr/main::opt::o_install.html
new file mode 100644
index 0000000..dc1aae8
--- /dev/null
+++ b/help-install/mr/main::opt::o_install.html
@@ -0,0 +1,30 @@
+<h3>
+<a name="o_install">स्थापनेचे विकल्प: स्थापना </a>
+</h3>
+
+<p>
+By default, the local CD-ROMs are searched for the installation source.
+For a network install, select the
+<em> स्थापना </em> option. Possible installation protocols are
+<ul>
+ <li>FTP</li>
+ <li>NFS</li>
+ <li>HTTP</li>
+</ul>
+</p>
+
+<p>
+The syntax to use is just like standard URLs. For example,
+if your server is found at 192.168.0.1 and you want to do an NFS-based
+install from the directory /install on this server, specify
+the source as follows:
+<ul>
+ <li> स्थापना =एनएफएस://१९२.१६८.०.१/ स्थापना </li>
+</ul>
+</p>
+
+<p>
+The network card will either be configured with <em>डिएचसिपि</em> or you
+must specify the parameters yourself as described in the
+<a href="#network">नेटवर्क विकल्प </a>.
+</p>
diff --git a/help-install/mr/main::opt::o_splash.html b/help-install/mr/main::opt::o_splash.html
new file mode 100644
index 0000000..af2fdc3
--- /dev/null
+++ b/help-install/mr/main::opt::o_splash.html
@@ -0,0 +1,12 @@
+<h3>
+<a name="o_splash">केर्नल विकल्प: स्प्लेश </a>
+</h3>
+
+<p>
+The splash screen is the picture shown during system start-up.
+<ul>
+ <li><em>स्प्लेश=०</em> -- The splash screen is switched off. This may be useful with very old monitors or if some error occurs.</li>
+ <li><em>स्प्लेश = वर्बोस</em> -- Activates splash, kernel and boot messages are still shown.</li>
+ <li><em> स्प्लेश= शांत</em> -- Activates splash, but no messages. Instead a progress bar is drawn.</li>
+</ul>
+</p>
diff --git a/help-install/mr/main::opt::o_vnc.html b/help-install/mr/main::opt::o_vnc.html
new file mode 100644
index 0000000..3b0cdee
--- /dev/null
+++ b/help-install/mr/main::opt::o_vnc.html
@@ -0,0 +1,18 @@
+<a name="o_vncpassword"/>
+
+<h3>
+<a name="o_vnc"> स्थापनेचे विकल्प : विएनसि</a>
+</h3>
+
+<p>
+To enable the VNC installation, specify the
+parameters vnc and vncpassword:
+<ul>
+ <li><em> विएनसि=१ विएनसि पासवर्ड=उदाहरण</em></li>
+</ul>
+</p>
+
+<p>
+The VNC server will be started and you may control YaST2 over any VNC
+client from a remote system.
+</p>
diff --git a/help-install/mr/main::rescue.html b/help-install/mr/main::rescue.html
new file mode 100644
index 0000000..8cf636a
--- /dev/null
+++ b/help-install/mr/main::rescue.html
@@ -0,0 +1,10 @@
+<h3>
+<a name="rescue">बचाव प्रणाली</a>
+</h3>
+
+<p>
+The <em>बचाव प्रणाली</em> is a small RAM disk base system. From there,
+it is possible to make all kinds of changes to an installed system. Because
+only low-level tools are available in this system, it is intended for
+experts.
+</p>
diff --git a/help-install/mr/main::videomode.html b/help-install/mr/main::videomode.html
new file mode 100644
index 0000000..a04f889
--- /dev/null
+++ b/help-install/mr/main::videomode.html
@@ -0,0 +1,18 @@
+<h3>
+<a name="videomode"> व्हिडिओ स्थिती निवड</a>
+</h3>
+
+<p>
+Press <em>@@@fkey_video@@@</em> to get the list of video modes your graphics card
+supports. The highest mode your monitor can display is preselected.
+</p>
+
+<p>
+It is possible that your monitor cannot be detected automatically. In that
+case, select your preferred mode manually.
+</p>
+
+<p>
+If your system has problems with the graphics card during the
+installation, the <em>अक्षर स्थिती </em> may be a usable work-around.
+</p>
diff --git a/help-install/mr/navi.html b/help-install/mr/navi.html
new file mode 100644
index 0000000..fc318c7
--- /dev/null
+++ b/help-install/mr/navi.html
@@ -0,0 +1 @@
+<p>परत जा<a href="#foobar">FOOBAR</a></p>