- Admin service is now splitted (gui and utility)

- Admin service extends Module
- fixed load modules from categories.conf.d

1 files changed, 446 insertions, 0 deletions

diff --git a/AdminPanel/Services/Utility.pm b/AdminPanel/Services/Utility.pm
new file mode 100644
index 0000000..baae3db
--- /dev/null
+++ b/AdminPanel/Services/Utility.pm
@@ -0,0 +1,446 @@
+# vim: set et ts=4 sw=4:
+#*****************************************************************************
+# 
+#  Copyright (c) 2013 Angelo Naselli <anaselli@linux.it>
+#  from drakx services
+# 
+#  This program is free software; you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License version 2, as
+#  published by the Free Software Foundation.
+# 
+#  This program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+# 
+#  You should have received a copy of the GNU General Public License
+#  along with this program; if not, write to the Free Software
+#  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# 
+#*****************************************************************************
+
+package AdminPanel::Services::Utility;
+
+
+
+
+#-######################################################################################
+#- misc imports
+#-######################################################################################
+
+use strict;
+use common;
+use run_program;
+
+use File::Basename qw( basename );
+use base qw(Exporter);
+
+our @EXPORT = qw(
+                services
+                xinetd_services
+                is_service_running
+                restart_or_start
+                stop
+                start
+                set_service
+                );
+
+sub description {
+    my %services = (
+acpid => N_("Listen and dispatch ACPI events from the kernel"),	    
+alsa => N_("Launch the ALSA (Advanced Linux Sound Architecture) sound system"),
+anacron => N_("Anacron is a periodic command scheduler."),
+apmd => N_("apmd is used for monitoring battery status and logging it via syslog.
+It can also be used for shutting down the machine when the battery is low."),
+atd => N_("Runs commands scheduled by the at command at the time specified when
+at was run, and runs batch commands when the load average is low enough."),
+'avahi-deamon' => N_("Avahi is a ZeroConf daemon which implements an mDNS stack"),
+chronyd => N_("An NTP client/server"),
+cpufreq => N_("Set CPU frequency settings"),
+crond => N_("cron is a standard UNIX program that runs user-specified programs
+at periodic scheduled times. vixie cron adds a number of features to the basic
+UNIX cron, including better security and more powerful configuration options."),
+cups => N_("Common UNIX Printing System (CUPS) is an advanced printer spooling system"),
+dm => N_("Launches the graphical display manager"),
+fam => N_("FAM is a file monitoring daemon. It is used to get reports when files change.
+It is used by GNOME and KDE"),
+g15daemon => N_("G15Daemon allows users access to all extra keys by decoding them and 
+pushing them back into the kernel via the linux UINPUT driver. This driver must be loaded 
+before g15daemon can be used for keyboard access. The G15 LCD is also supported. By default, 
+with no other clients active, g15daemon will display a clock. Client applications and 
+scripts can access the LCD via a simple API."),
+gpm => N_("GPM adds mouse support to text-based Linux applications such the
+Midnight Commander. It also allows mouse-based console cut-and-paste operations,
+and includes support for pop-up menus on the console."),
+haldaemon => N_("HAL is a daemon that collects and maintains information about hardware"),
+harddrake => N_("HardDrake runs a hardware probe, and optionally configures
+new/changed hardware."),
+httpd => N_("Apache is a World Wide Web server. It is used to serve HTML files and CGI."),
+inet => N_("The internet superserver daemon (commonly called inetd) starts a
+variety of other internet services as needed. It is responsible for starting
+many services, including telnet, ftp, rsh, and rlogin. Disabling inetd disables
+all of the services it is responsible for."),
+ip6tables => N_("Automates a packet filtering firewall with ip6tables"),
+iptables => N_("Automates a packet filtering firewall with iptables"),
+irqbalance => N_("Evenly distributes IRQ load across multiple CPUs for enhanced performance"),
+keytable => N_("This package loads the selected keyboard map as set in
+/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.
+You should leave this enabled for most machines."),
+kheader => N_("Automatic regeneration of kernel header in /boot for
+/usr/include/linux/{autoconf,version}.h"),
+kudzu => N_("Automatic detection and configuration of hardware at boot."),
+'laptop-mode' => N_("Tweaks system behavior to extend battery life"),
+linuxconf => N_("Linuxconf will sometimes arrange to perform various tasks
+at boot-time to maintain the system configuration."),
+lpd => N_("lpd is the print daemon required for lpr to work properly. It is
+basically a server that arbitrates print jobs to printer(s)."),
+lvs => N_("Linux Virtual Server, used to build a high-performance and highly
+available server."),
+mandi => N_("Monitors the network (Interactive Firewall and wireless"),
+mdadm => N_("Software RAID monitoring and management"),
+messagebus => N_("DBUS is a daemon which broadcasts notifications of system events and other messages"),
+msec => N_("Enables MSEC security policy on system startup"),
+named => N_("named (BIND) is a Domain Name Server (DNS) that is used to resolve host names to IP addresses."),
+netconsole => N_("Initializes network console logging"),
+netfs => N_("Mounts and unmounts all Network File System (NFS), SMB (Lan
+Manager/Windows), and NCP (NetWare) mount points."),
+network => N_("Activates/Deactivates all network interfaces configured to start
+at boot time."),
+'network-auth' => N_("Requires network to be up if enabled"),
+'network-up' => N_("Wait for the hotplugged network to be up"),
+nfs => N_("NFS is a popular protocol for file sharing across TCP/IP networks.
+This service provides NFS server functionality, which is configured via the
+/etc/exports file."),
+nfslock => N_("NFS is a popular protocol for file sharing across TCP/IP
+networks. This service provides NFS file locking functionality."),
+ntpd => N_("Synchronizes system time using the Network Time Protocol (NTP)"),
+numlock => N_("Automatically switch on numlock key locker under console
+and Xorg at boot."),
+oki4daemon => N_("Support the OKI 4w and compatible winprinters."),
+partmon => N_("Checks if a partition is close to full up"),
+pcmcia => N_("PCMCIA support is usually to support things like ethernet and
+modems in laptops.  It will not get started unless configured so it is safe to have
+it installed on machines that do not need it."),
+portmap => N_("The portmapper manages RPC connections, which are used by
+protocols such as NFS and NIS. The portmap server must be running on machines
+which act as servers for protocols which make use of the RPC mechanism."),
+portreserve => N_("Reserves some TCP ports"),
+postfix => N_("Postfix is a Mail Transport Agent, which is the program that moves mail from one machine to another."),
+random => N_("Saves and restores system entropy pool for higher quality random
+number generation."),
+rawdevices => N_("Assign raw devices to block devices (such as hard disk drive
+partitions), for the use of applications such as Oracle or DVD players"),
+resolvconf => N_("Nameserver information manager"),
+routed => N_("The routed daemon allows for automatic IP router table updated via
+the RIP protocol. While RIP is widely used on small networks, more complex
+routing protocols are needed for complex networks."),
+rstatd => N_("The rstat protocol allows users on a network to retrieve
+performance metrics for any machine on that network."),
+rsyslog => N_("Syslog is the facility by which many daemons use to log messages to various system log files.  It is a good idea to always run rsyslog."),
+rusersd => N_("The rusers protocol allows users on a network to identify who is
+logged in on other responding machines."),
+rwhod => N_("The rwho protocol lets remote users get a list of all of the users
+logged into a machine running the rwho daemon (similar to finger)."),
+saned => N_("SANE (Scanner Access Now Easy) enables to access scanners, video cameras, ..."),
+shorewall => N_("Packet filtering firewall"),
+smb => N_("The SMB/CIFS protocol enables to share access to files & printers and also integrates with a Windows Server domain"),
+sound => N_("Launch the sound system on your machine"),
+'speech-dispatcherd' => N_("layer for speech analysis"),
+sshd => N_("Secure Shell is a network protocol that allows data to be exchanged over a secure channel between two computers"),
+syslog => N_("Syslog is the facility by which many daemons use to log messages
+to various system log files.  It is a good idea to always run syslog."),
+'udev-post' => N_("Moves the generated persistent udev rules to /etc/udev/rules.d"),
+usb => N_("Load the drivers for your usb devices."),
+vnStat => N_("A lightweight network traffic monitor"),
+xfs => N_("Starts the X Font Server."),
+xinetd => N_("Starts other deamons on demand."),
+    );
+    my ($name) = @_;
+    my $s = $services{$name};
+    if ($s) {
+        $s = translate($s);
+    } else {
+        my $file = "$::prefix/usr/lib/systemd/system/$name.service";
+        if (-e $file) {
+                $s = cat_($file);
+                $s = $s =~ /^Description=(.*)/mg ? $1 : '';
+        } else {
+                $file = find { -e $_ } map { "$::prefix$_/$name" } '/etc/rc.d/init.d', '/etc/init.d', '/etc/xinetd.d';
+                $s = cat_($file);
+                $s =~ s/\\\s*\n#\s*//mg;
+                $s =
+                        $s =~ /^#\s+(?:Short-)?[dD]escription:\s+(.*?)^(?:[^#]|# {0,2}\S)/sm ? $1 :
+                        $s =~ /^#\s*(.*?)^[^#]/sm ? $1 : '';
+
+                $s =~ s/#\s*//mg;
+        }
+    }
+    $s =~ s/\n/ /gm; $s =~ s/\s+$//;
+    $s;
+}
+
+
+sub set_service {
+    my ($service, $enable) = @_;
+    
+    my @xinetd_services = map { $_->[0] } xinetd_services();
+
+    if (member($service, @xinetd_services)) {
+        run_program::rooted($::prefix, "chkconfig", $enable ? "--add" : "--del", $service);
+    } elsif (running_systemd() || has_systemd()) {
+        # systemctl rejects any symlinked units. You have to enabled the real file
+        if (-l "/lib/systemd/system/$service.service") {
+            my $name = readlink("/lib/systemd/system/$service.service");
+            $service = File::Basename::basename($name);
+        } else {
+            $service = $service . ".service";
+        }
+        run_program::rooted($::prefix, "/bin/systemctl", $enable ? "enable" : "disable", $service);
+    } else {
+        my $script = "/etc/rc.d/init.d/$service";
+        run_program::rooted($::prefix, "chkconfig", $enable ? "--add" : "--del", $service);
+        #- FIXME: handle services with no chkconfig line and with no Default-Start levels in LSB header
+        if ($enable && cat_("$::prefix$script") =~ /^#\s+chkconfig:\s+-/m) {
+            run_program::rooted($::prefix, "chkconfig", "--level", "35", $service, "on");
+        }
+    }
+}
+
+sub _run_action {
+    my ($service, $action) = @_;
+    if (running_systemd()) {
+        run_program::rooted($::prefix, '/bin/systemctl', '--no-block', $action, "$service.service");
+    } else {
+        run_program::rooted($::prefix, "/etc/rc.d/init.d/$service", $action);
+    }
+}
+
+sub running_systemd() {
+    run_program::rooted($::prefix, '/bin/mountpoint', '-q', '/sys/fs/cgroup/systemd');
+}
+
+sub has_systemd() {
+    run_program::rooted($::prefix, '/bin/rpm', '-q', 'systemd');
+}
+
+sub xinetd_services() {
+    local $ENV{LANGUAGE} = 'C';
+    my @xinetd_services;
+    foreach (run_program::rooted_get_stdout($::prefix, '/sbin/chkconfig', '--list', '--type', 'xinetd')) {
+        if (my ($xinetd_name, $on_off) = m!^\t(\S+):\s*(on|off)!) {
+            push @xinetd_services, [ $xinetd_name, $on_off eq 'on' ];
+        }
+    }
+    @xinetd_services;
+}
+
+sub _systemd_services() {
+    local $ENV{LANGUAGE} = 'C';
+    my @services;
+    my %loaded;
+    # Running system using systemd
+    log::explanations("Detected systemd running. Using systemctl introspection.");
+    foreach (run_program::rooted_get_stdout($::prefix, '/bin/systemctl', '--full', '--all', 'list-units')) {
+        if (my ($name) = m!^(\S+)\.service\s+loaded!) {
+            # We only look at non-template, non-linked service files in /lib
+            # We also check for any non-masked sysvinit files as these are
+            # also handled by systemd
+            if ($name !~ /.*\@$/g && (-e "$::prefix/lib/systemd/system/$name.service" or -e "$::prefix/etc/rc.d/init.d/$name") && ! -l "$::prefix/lib/systemd/system/$name.service") {
+                push @services, [ $name, !!run_program::rooted($::prefix, '/bin/systemctl', '--quiet', 'is-enabled', "$name.service") ];
+                $loaded{$name} = 1;
+            }
+        }
+    }
+    # list-units will not list disabled units that can be enabled
+    foreach (run_program::rooted_get_stdout($::prefix, '/bin/systemctl', '--full', 'list-unit-files')) {
+        if (my ($name) = m!^(\S+)\.service\s+disabled!) {
+            # We only look at non-template, non-linked service files in /lib
+            # We also check for any non-masked sysvinit files as these are
+            # also handled by systemd
+            if (!exists $loaded{$name} && $name !~ /.*\@$/g && (-e "$::prefix/lib/systemd/system/$name.service" or -e "$::prefix/etc/rc.d/init.d/$name") && ! -l "$::prefix/lib/systemd/system/$name.service") {
+                # Limit ourselves to "standard" targets which can be enabled
+                my $wantedby = cat_("$::prefix/lib/systemd/system/$name.service") =~ /^WantedBy=(graphical|multi-user).target$/sm ? $1 : '';
+                if ($wantedby) {
+                    push @services, [ $name, 0 ];
+                }
+            }
+        }
+    }
+
+    @services;
+}
+
+sub _legacy_services() {
+    local $ENV{LANGUAGE} = 'C';
+    my @services;
+    my $has_systemd = has_systemd();
+    if ($has_systemd) {
+        # The system not using systemd but will be at next boot. This is
+        # is typically the case in the installer. In this mode we must read
+        # as much as is practicable from the native systemd unit files and
+        # combine that with information from chkconfig regarding legacy sysvinit
+        # scripts (which systemd will parse and include when running)
+        log::explanations("Detected systemd installed. Using fake service+chkconfig introspection.");
+        foreach (glob_("$::prefix/lib/systemd/system/*.service")) {
+            my ($name) = m!([^/]*).service$!;
+
+            # We only look at non-template, non-symlinked service files
+            if (!(/.*\@\.service$/g) && ! -l $_) {
+                # Limit ourselves to "standard" targets
+                my $wantedby = cat_($_) =~ /^WantedBy=(graphical|multi-user).target$/sm ? $1 : '';
+                if ($wantedby) {
+                    # Exclude if enabled statically
+                    # Note DO NOT use -e when testing for files that could
+                    # be symbolic links as this will fail under a chroot
+                    # setup where -e will fail if the symlink target does
+                    # exist which is typically the case when viewed outside
+                    # of the chroot.
+                    if (!-l "$::prefix/lib/systemd/system/$wantedby.target.wants/$name.service") {
+                        push @services, [ $name, !!-l "$::prefix/etc/systemd/system/$wantedby.target.wants/$name.service" ];
+                    }
+                }
+            }
+        }
+    } else {
+        log::explanations("Could not detect systemd. Using chkconfig service introspection.");
+    }
+
+    # Regardless of whether we expect to use systemd on next boot, we still
+    # need to instrospect information about non-systemd native services.
+    my $runlevel;
+    my $on_off;
+    if (!$::isInstall) {
+        $runlevel = (split " ", `/sbin/runlevel`)[1];
+    }
+    foreach (run_program::rooted_get_stdout($::prefix, '/sbin/chkconfig', '--list', '--type', 'sysv')) {
+        if (my ($name, $l) = m!^(\S+)\s+(0:(on|off).*)!) {
+            # If we expect to use systemd (i.e. installer) only show those
+            # sysvinit scripts which are not masked by a native systemd unit.
+            my $has_systemd_unit = systemd_unit_exists($name);
+            if (!$has_systemd || !$has_systemd_unit) {
+                if ($::isInstall) {
+                    $on_off = $l =~ /\d+:on/g;
+                } else {
+                    $on_off = $l =~ /$runlevel:on/g;
+                }
+                push @services, [ $name, $on_off ];
+            }
+        }
+    }
+    @services;
+}
+
+#- returns:
+#--- the listref of installed services
+#--- the listref of "on" services
+sub services() {
+    my @services;
+    if (running_systemd()) {
+        @services = _systemd_services();
+    } else {
+        @services = _legacy_services();
+    }
+
+    my @l = xinetd_services();
+    push @l, @services;
+    @l = sort { $a->[0] cmp $b->[0] } @l;
+    [ map { $_->[0] } @l ], [ map { $_->[0] } grep { $_->[1] } @l ];
+}
+
+
+
+sub systemd_unit_exists {
+    my ($name) = @_;
+    # we test with -l as symlinks are not valid when the system is chrooted:
+    -e "$::prefix/lib/systemd/system/$name.service" or -l "$::prefix/lib/systemd/system/$name.service";
+}
+
+sub service_exists {
+    my ($service) = @_;
+    -x "$::prefix/etc/rc.d/init.d/$service" or systemd_unit_exists($service);
+}
+
+sub restart ($) {
+    my ($service) = @_;
+    # Exit silently if the service is not installed
+    service_exists($service) or return 1;
+    _run_action($service, "restart");
+}
+
+sub restart_or_start ($) {
+    my ($service) = @_;
+    # Exit silently if the service is not installed
+    service_exists($service) or return 1;
+    _run_action($service, is_service_running($service) ? "restart" : "start");
+}
+
+sub start ($) {
+    my ($service) = @_;
+    # Exit silently if the service is not installed
+    service_exists($service) or return 1;
+    _run_action($service, "start");
+}
+
+sub start_not_running_service ($) {
+    my ($service) = @_;
+    # Exit silently if the service is not installed
+    service_exists($service) or return 1;
+    is_service_running($service) || _run_action($service, "start");
+}
+
+sub stop ($) {
+    my ($service) = @_;
+    # Exit silently if the service is not installed
+    service_exists($service) or return 1;
+    _run_action($service, "stop");
+}
+
+sub is_service_running ($) {
+    my ($service) = @_;
+    # Exit silently if the service is not installed
+    service_exists($service) or return 1;
+    if (running_systemd()) {
+        run_program::rooted($::prefix, '/bin/systemctl', '--quiet', 'is-active', "$service.service");
+    } else {
+        run_program::rooted($::prefix, '/sbin/service', $service, 'status');
+    }
+}
+
+sub starts_on_boot {
+    my ($service) = @_;
+    my (undef, $on_services) = services();
+    member($service, @$on_services);
+}
+
+sub start_service_on_boot ($) {
+    my ($service) = @_;
+    set_service($service, 1);
+}
+
+sub do_not_start_service_on_boot ($) {
+    my ($service) = @_;
+    set_service($service, 0);
+}
+
+sub enable {
+    my ($service, $o_dont_apply) = @_;
+    start_service_on_boot($service);
+    restart_or_start($service) unless $o_dont_apply;
+}
+
+sub disable {
+    my ($service, $o_dont_apply) = @_;
+    do_not_start_service_on_boot($service);
+    stop($service) unless $o_dont_apply;
+}
+
+sub set_status {
+    my ($service, $enable, $o_dont_apply) = @_;
+    if ($enable) {
+	enable($service, $o_dont_apply);
+    } else {
+	disable($service, $o_dont_apply);
+    }
+}
+
+1;