0 files changed, 0 insertions, 0 deletions

path: root/ulri

#!/usr/bin/perl
#
# Copyright (C) 2005,2006 Mandriva
# 
# Author: Florent Villard <warly@mandriva.com>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
# compare and rebuild packages on different architecture
#
# TODO
# 
# - create a configuration file to handle the various iurt running
# - get the content of the rebuild dir 
# - run as many iurt as machines are available and gather results
# - the scheduler just take the results, launch new rebuild, and quit
# - use perl ssh and try to workarround the non working timeout when the
#   remote machine is stalled
# - use submitter as packager, not generic name
#

use strict;
use MDK::Common qw(cat_ if_);
use Iurt::Config qw(config_usage get_date config_init get_author_email check_arch check_noarch);
use Iurt::Process qw(check_pid);
use Iurt::File qw(check_upload_tree);
use Iurt::Mail qw(sendmail);
use Iurt::Util qw(plog_init plog ssh_setup ssh sout sget sput);
use File::Copy 'move';
use File::Path 'make_path';
use File::Temp 'mktemp';
use Filesys::Df qw(df);
use Data::Dumper;
use File::Slurp qw(read_file);

my %run;
my $program_name = 'ulri';
$run{program_name} = $program_name;

open(my $LOG, ">&STDERR");
$run{LOG} = sub { print $LOG @_ };

plog_init($program_name, $LOG, 7, 1);

my $HOME = $ENV{HOME};
my $configfile = "$HOME/.upload.conf";
my $sysconfigfile = "/etc/iurt/upload.conf";

my $config = {};
foreach my $f ($configfile, $sysconfigfile) {
    plog('DEBUG', "load config: $f");
    if (-f $f) {
        $config = eval(cat_($f))
          or die "FATAL $program_name: syntax error in $f";
        last;
    }
}

my %config_usage = ( 
    admin => {
	desc => 'mail address of the bot administrator',
	default => 'distrib-admin@mandrivalinux.org'
    },
    'arch_translation' => {  
	desc => "Renaming of arch",
	default => { 'sparc64' => 'sparcv9' }
    },
     bot => {  
	desc => "List of bot able to compile the packages",
	default => { 
	    i586 => { 
	        n1 => { 
		    iurt => {
			user => 'mandrake' ,
			command => 'sudo -u mandrake -H /usr/local/bin/iurt2.sh --copy_srpm --group -v 1 --config local_spool /export/home/mandrake/iurt/__DIR__ --no_rsync --chrooted-urpmi http://kenobi/dis/ -r __TARGET__ __ARCH__',
			packages => '/export/home/mandrake/iurt/',
		    } ,
		},
	    },
	},
    },
    media => { 
	desc => 'Corresponding media to add given the current media',
	default => {
	    default => { 
		"main/release" => [ "main/release", "main/updates" ], 
		"main/updates" => [ "main/release", "main/updates" ],
		"main/testing" => [ "main/release", "main/updates",
			"main/testing" ],
		"main/backports" => [ "main/release", "main/updates",
			"main/testing", "main/backports" ],
		"contrib/release" => [ "main/release", "main/updates",
			"contrib/release", "contrib/updates" ],
		"contrib/updates" => [ "main/release", "main/updates",
			"contrib/release", "contrib/updates" ],
		"contrib/testing" => [ "main/release", "main/updates",
			"main/testing", "contrib/release", "contrib/updates",
			"contrib/testing" ],
		"contrib/backports" => [ "main/release", "main/updates",
			"main/testing", "main/backports", "contrib/release",
			"contrib/updates", "contrib/testing",
			"contrib/backports" ],
		"non-free/release" => [ "main/release", "main/updates",
			"non-free/release", "non-free/updates" ],
		"non-free/updates" => [ "main/release", "main/updates",
			"non-free/release", "non-free/updates" ],
		"non-free/testing" => [ "main/release", "main/updates",
			"main/tessting", "non-free/release",
			"non-free/updates", "non-free/testing" ],
		"non-free/backports" => [ "main/release", "main/updates",
			"main/testing", "main/backports", "non-free/release",
			"non-free/updates", "non-free/testing",
			"non-free/backports" ],
	    },
	},
    },
    faildelay => {
	desc => "Time after which the rebuild is considered as a failure",
	default => 36000
    },
    http_queue => {
	desc => 'Address where log can be consulted',
	default => 'http://kenobi.mandriva.com/queue '
    },
    queue => {
	desc => "Root of the tree where the packages to compile are located",
	default => "$HOME/uploads"
    },
    tmp => {
       desc => "Temporary directory",
       default => "$HOME/tmp"
    },
    ssh_options => {
	desc => "SSH options",
	default => "-o ConnectTimeout=20 -o BatchMode=yes"
    },
    packager => {
        desc => 'Default packager tag user by bot',
	default => 'Mageia Team <http://www.mageia.org>'
    },
);
config_usage(\%config_usage, $config) if $run{config_usage};
config_init(\%config_usage, $config, \%run);

my %untranslated_arch;
foreach my $k (keys %{$config->{arch_translation}}) {
    my $v = $config->{arch_translation}{$k};
    push @{$untranslated_arch{$v}}, $k;
}

$run{pidfile_home} = $config->{tmp};
$run{pidfile} = $program_name;
my $pidfile = check_pid(\%run);


my ($fulldate, $daydate) = get_date();
$run{daydate} = $daydate;

my $df = df $config->{queue};
if ($df->{per} == 100) {
    # FIXME should send a mail too
    die "FATAL $program_name: not enough space on the filesystem, only $df->{bavail} KB on $config->{queue}, full at $df->{per}%";
}

($fulldate, $daydate) = get_date();

my %pkg_tree;
my $compildone = {};

my $todo = "$config->{queue}/todo";
my $failure = "$config->{queue}/failure";
my $done = "$config->{queue}/done";

# Raise this when the noarch package starts to build on any bot
my %noarch_build;

#
# Part 0: gather data from upload tree
#

plog('MSG', "check uploads tree");

# A list of what is currently building so we can report at the end
#
my %build_list;

plog('DEBUG', "input queue is $todo");

sub todo_func {
    my ($todo, $f, $m, $s, $r) = @_;

    my $media = "$m/$s";

    if ($r =~ /(\d{14}\.(\w+)\.\w+\.\d+)_(.*\.src\.rpm)$/) {
	my ($prefix, $user, $srpm) = ($1, $2, $3);

	plog('DEBUG', "found srpm $srpm ($prefix)");
	$pkg_tree{$prefix}{media}{$media}{path} = "/$f/$m/$s";
	$pkg_tree{$prefix}{target} = $f;
	$pkg_tree{$prefix}{user} = $user;
	push @{$pkg_tree{$prefix}{srpms}} , $srpm;
	my ($name) = $srpm =~ /(.*)-[^-]+-[^-]+\.src\.rpm$/;

	return $pkg_tree{$prefix}{srpm_name}{$name} = $srpm;
    }

    if ($r =~ /(\d{14}\.\w+\.\w+\.\d+)_([\w-]+)\.(\w+)\.(\w+)\.(\d{14})\.(\d+)\.lock$/) {
	my ($prefix, $arch, $bot, $host, $date, $pid) = ($1, $2, $3, $4, $5, $6);

	$arch = $config->{arch_translation}{$arch} if $config->{arch_translation}{$arch};
	plog('DEBUG', "found lock on $host/$arch for $prefix");

	# Only for build status reporting
	#
	push @{$build_list{"$host/$arch"}}, $prefix;

	if ($arch =~ /noarch/) {
	    plog('DEBUG', "... and $prefix is noarch");
	    $noarch_build{$prefix} = 1;
	    $arch =~ s/-.*//;
	}

	$run{bot}{$host}{$bot} = $prefix;

	# this should be in the cache, but waiting for a cache-clean option
	$compildone->{$prefix}{$media}{$arch} = 1;

	my $time = read_line("$todo/$f/$m/$s/$r");
	$time = (split ' ', $time)[2];
	push @{$pkg_tree{$prefix}{media}{$media}{bot}}, {
	    bot => $bot,
	    host => $host,
	    date => $date,
	    pid => $pid,
	    'arch' => $arch,
	    'time' => $time
	};
    }
}

sub todo_post {
    my ($todo, $f, $m, $s, $r) = @_;

    if ($r =~ /(\d{14}\.\w+\.\w+\.\d+)_([\w-]+)\.(\w+)\.(\w+)\.(\d{14})\.(\d+)\.lock$/) {
	if (!$pkg_tree{$1}{srpms}) {
	    plog('INFO', "cleaning orphan $r");
	    unlink "$todo/$f/$m/$s/$r";
	}
    }
}

sub done_func {
    my ($_todo, $_f, $m, $s, $r) = @_;

    my $media = "$m/$s";

    if ($r =~ /(\d{14}\.\w+\.\w+\.\d+)_(.*)\.(done|fail|excluded)$/) {
	my ($prefix, $arch) = ($1, $2);
	$arch = $config->{arch_translation}{$arch} if $config->{arch_translation}{$arch};
	$compildone->{$prefix}{$media}{$arch} = 1;
    } elsif ($r =~ /(\d{14}\.\w+\.\w+\.\d+)_(.*\.([^.]+)\.rpm)$/) {
	my ($prefix, $rpm) = ($1, $2);
	plog('DEBUG', "found already built rpm $rpm ($prefix)");
	push @{$pkg_tree{$prefix}{rpms}} , $rpm;
    }
}


check_upload_tree(\%run, $todo, \&todo_func, \&todo_post);

# getting already compiled packages
# The cache should not be needed if the .done file are removed as the same
# time as the src.rpm in the todo tree
check_upload_tree(\%run, $done, \&done_func,);


#
# Part 1: get results from finished builds
#

plog('MSG', "check build bot results");

my %later;
foreach my $prefix (keys %pkg_tree) {
    my $ent = $pkg_tree{$prefix};
    foreach my $media (keys %{$ent->{media}}) {
        my $path = $ent->{media}{$media}{path};
        my $user = $ent->{user};

        # Local pathnames
        my $done_dir = "$done/$path";
        my $todo_dir = "$todo/$path";
        my $fail_dir = "$failure/$path";

        bot: foreach my $bot_list (@{$ent->{media}{$media}{bot}}) {
	    my ($bot, $host, $date, $pid, $arch, $time) =
			    @$bot_list{qw(bot host date pid arch time)};

	    my $bot_conf = $config->{bot}{$arch}{$host}{$bot};
            my $remote = ssh_setup($config->{ssh_options},
				   $bot_conf->{user}, $host);
	    
	    my $prefix_dir = "$bot_conf->{packages}/$path/$prefix-$arch/";

	    # If our build is noarch, set arch appropriately.
	    #
	    my $lock_file =
	        "$todo_dir/${prefix}_$arch-noarch.$bot.$host.$date.$pid.lock";
	    
	    if (-f $lock_file) {
	        plog('DEBUG', "$prefix is noarch");
	        $arch = "noarch";
	    } else {
	        $lock_file =~ s/-noarch//;
	    }
	    
	    my $status_file = "$prefix_dir/log/status.log";

	    plog('INFO', "check status: $host/$arch ($bot [$pid])");
	    my $status = sout($remote, "cat $status_file");
	    my $success;
	    my $fail;
	    my $later;
	    
	    # Check if the build bot finished on the other side
	    #
	    if ($status) {
		plog('INFO', "check result: $host/$arch ($bot [$pid])");
		foreach my $res (split "\n", $status) {
		    my ($p, $r) = $res =~ /(.*):\s+(.*)/;
		    plog('DEBUG', $res);
		    if ($r eq 'install_deps_failure') {
			plog('FAIL', "install deps failure, rebuild later: $p");
			$later{$prefix} = 1;
			$later = 1;
		    }
		    if ($r ne 'ok') {
			plog('FAIL', "$r: $p");
			$fail = 1;
		    }
		}
		
		if (!$fail) {
		    my @list = split "\n", sout($remote, "ls $prefix_dir");
		    my $error;
		    my $done;
		    
		    my $arch_check = join '|', $arch, if_($untranslated_arch{$arch}, @{$untranslated_arch{$arch}});
		    plog('MSG', "checking for $arch_check arch");
		    foreach my $result (@list) {
			$result =~ /\.(src|$arch_check|noarch)\.rpm$/ or next;
			
			# do not copy the initial src package
			$result =~ /^$prefix/ and next;
			
			my $result_file = "$done_dir/${prefix}_$result";
			my $done_file = "$done_dir/${prefix}_$arch.done";
			
			plog('OK', "build ok: $result");
			if ($result =~ /\.$arch_check\.rpm$/) {
			    $done = 1;
			}
			
			plog('DEBUG', "copy files to done");
			make_path($done_dir);
			if (sget($remote, "$prefix_dir/$result",
				 "$result_file.new")) {
			    plog('ERR', "copying $result from $host failed ($!)");
			    $error = 1;
			    last;
			} elsif (move("$result_file.new", $result_file)) {
			    if ($done) {
				create_file($done_file, "$bot $host");
				$success = 1;
			    }
			}
		    }
		    next if $error;
		    
		    if ($success) {
			# Fetch build log and clean remote machine
			sget($remote, "$prefix_dir/log", "$done_dir/$prefix");
			ssh($remote, "rm -rf $prefix_dir");
		    }
		}
	    } # if ($status)
	    
	    #
	    # Handle build failure
	    #
	    
	    my $proc_state;
	    if (!$fail) {
		chomp($proc_state = sout($remote, "ps h -o state $pid"));
	    }
	    
	    my $seconds = time()-$time;
	    
	    # Reasons for failure
	    my $timeout = $seconds > $config->{faildelay};
	    my $zombie = $proc_state eq 'Z';
	    my $ended = !$proc_state;
	    
	    unless ($success || $later || $fail || $timeout || $zombie || $ended) {
		next bot;
	    }
	    
	    plog('INFO', "delete lock file for $prefix");
	    unlink $lock_file;
	    
	    $run{bot}{$host}{$bot} = 0;
	    
	    if ($later) {
		next bot;
	    }
	    
	    if (!$ended && !$fail) {
		plog('FAIL', "$bot timed out on $host/$arch ($seconds sec) or " .
		     "it's dead (status $proc_state), removing lock");
		$compildone->{$prefix}{$media}{$arch} = 0;
		next bot;
	    }
	    
	    if ($success && !$fail) {
		next bot;
	    }
	    
	    if (!$status) {
	    plog('ERR', "build bot died on $host, reschedule compilation");
	    next bot;
	    }
	    
	    plog('INFO', "Failure reason: $success || $later || $fail || $timeout || $zombie || $ended");
	    
	    plog('FAIL', "build failed");
	    create_file("$done_dir/${prefix}_$arch.fail", "$bot $host");
	    make_path($fail_dir);
	    
	    mkdir("$fail_dir/$prefix"); 
	    if (sget($remote, "$prefix_dir/*", "$fail_dir/$prefix")) {
		plog('ERR', "copying from $host:$prefix_dir/ " .
		     "to $fail_dir/ failed ($!)");
		$compildone->{$prefix}{$media}{$arch} = 0;
		# clean the log on the compilation machine
		ssh($remote, "rm -rf $prefix_dir");
		next bot;
	    }
	    
	    # What to do with the previously build packages? Move them to
	    # failure, rejected ?
	    # 20061220 warly move them to failure for now
	    
	    foreach my $rpm (@{$ent->{rpms}}) {
		my $file = "$done_dir/${prefix}_$rpm";
		plog('DEBUG', "moving built rpm $file to $fail_dir/${prefix}_$rpm");
		link $file, "$fail_dir/${prefix}_$rpm";
		unlink $file;
	    }
	    # Should clean the queue 
	    # Must remove the SRPM and the lock 
	    foreach my $srpm (@{$ent->{srpms}}) {                                
		my $file = "$todo_dir/${prefix}_$srpm";
		plog('DEBUG', "moving $file to $fail_dir/${prefix}_$srpm");
		link $file, "$fail_dir/${prefix}_$srpm";
		# FIXME If another arch is currently building, we will not clean its logs (Bug #4343)
		delete $pkg_tree{$prefix};
		unlink $file;
		# If one arch has been generated, we also have a src.rpm in done
		$file = "$done_dir/${prefix}_$srpm";
		if (-f $file) {
		    plog('DEBUG', "deleting $file");
		    unlink $file;
		}
	    }
	    
	    # Notify user if build failed
	    #
	    if ($user) {
		my $text = "Build of the following packages failed:\n\n";
		my $srpms = "";
		foreach my $srpm (@{$ent->{srpms}}) {
		    $srpms .= "$srpm ";
		    $text .= "- $srpm\n";
		}
		
		my $to = get_author_email($user) || "Unknown <$config->{admin}>";
		my $cc;
		my $fpath = "$config->{http_queue}/failure/$path/$prefix";
		$fpath =~ tr!/!!s;	# Squash double slashes ...
		$fpath =~ s!/!//!;	# ... except for http://

		$text .= "\nFailure details available in $fpath/log\n";
		$text .= "Reason:\n";
		$text .= read_file("$fail_dir/$prefix/log/status.log");
		$text .= "\nLog files generated:\n";
		
		opendir my $DP1, "$fail_dir/$prefix/log/";
		foreach my $f1 (sort(readdir($DP1))) {
		    if (! -d "$fail_dir/$prefix/log/$f1" || $f1 =~ m/^\./) {
			next;
		    }
		    
		    opendir my $DP2, "$fail_dir/$prefix/log/$f1";
		    foreach my $f2 (readdir $DP2) {
			if ($f2 =~ m/^\./) {
			    next;
			}
			$text .= "$fpath/log/$f1/$f2\n";
		    }
		    closedir $DP2;
		}
		closedir $DP1;
		
		sendmail($to, $cc,
			 "Rebuild failed on $arch for $srpms", $text,
			 "Ulri the scheduler bot <$config->{admin}>", 0, $config);
	    }
	    
	    # clean the log on the compilation machine
	    ssh($remote, "rm -rf $prefix_dir");
	    
	} # end bot
    } # end path
} # end prefix


#
# Part 2: check queue and start new jobs if a bot is available
#

plog('MSG', "launching new compilations");
my %to_compile;

# do not sort the keys to be able to ignore packages which makes iurt
# crash or just lock ulri somehow

foreach my $prefix (sort keys %pkg_tree) {
    next if $later{$prefix};

    my $ent = $pkg_tree{$prefix};
    foreach my $media (keys %{$ent->{media}}) {
	my $path = $ent->{media}{$media}{path};
	my $target = $ent->{target};
	my $srpms = $ent->{srpms} or next;
	
	my $user = get_author_email($ent->{user}) || $config->{packager};
	$user =~ s/([<>])/\\$1/g;
	
	# Local pathnames
	my $done_dir = "$done/$path";
	my $todo_dir = "$todo/$path";
	
	# Make sure these exist
	make_path($done_dir);
	make_path($todo_dir);
	
	#plog('DEBUG', "searching a bot to compile @$srpms");
	
	# count noarch todos only once even if searching multiple bots
	my $noarch_countflag = 0;
	
	# need to find a bot for each arch
	foreach my $arch (keys %{$config->{bot}}) {
	    my $exclude;
	    
	    # Skip this arch if package is building as noarch
	    #
	    next if $noarch_build{$prefix};
	    
	    next if $compildone->{$prefix}{$media}{noarch};
	    next if $compildone->{$prefix}{$media}{$arch};
	    
	    # If all packages in a group are noarch, consider the entire group
	    # as noarch
	    #
	    my $noarch = 1;
	    foreach my $srpm (@$srpms) {
		if (!check_noarch("$todo_dir/${prefix}_$srpm")) {
		    $noarch = 0;
		    last;
		}
	    }
	    
	    #plog("@$srpms is noarch") if $noarch;
	    
	    foreach my $srpm (@$srpms) {
		if (!check_arch("$todo_dir/${prefix}_$srpm", $arch)) {
		    plog('WARN', "excluding from $arch: $srpm");
		    $exclude = 1;
		    last;
		}
	    }
	    
	    if ($exclude) {
		create_file("$done_dir/${prefix}_$arch.excluded",
			    "ulri $arch excluded");
		next;
	    }
	    
	    if ($noarch) {
		plog('DEBUG', "search any bot for @$srpms") unless $noarch_countflag;
	    } else {
		plog('DEBUG', "search $arch bot for @$srpms");
	    }
	    
	    foreach my $host (keys %{$config->{bot}{$arch}}) {
		foreach my $bot (keys %{$config->{bot}{$arch}{$host}}) {
		    next if $run{bot}{$host}{$bot};
		    
		    # Enable noarch lock after the first bot snarfs the package
		    #
		    $noarch_build{$prefix} = 1 if $noarch;
		    
		    plog('INFO', "building on $host/$arch ($bot)");
		    
		    $run{bot}{$host}{$bot} = $prefix;
		    $compildone->{$prefix}{$media}{$arch} = 1;
		    
		    my $bot_conf = $config->{bot}{$arch}{$host}{$bot};
		    my $remote = ssh_setup($config->{ssh_options},
					   $bot_conf->{user}, $host);
		    
		    my $prefix_dir = "$bot_conf->{packages}/$path/$prefix-$arch/";
		    my $status_file = "$prefix_dir/log/status.log";
		    
		    # Copy packages to build node
		    #
		    # create also the log dir for botcmd.log
		    next if ssh($remote, "mkdir -p $prefix_dir/log");
		    my $pkgs = "";
		    my $ok = 1;
		    foreach my $srpm (@$srpms) {
			plog('NOTIFY', "Send to $host/$arch: $srpm");
			$ok &&= !sput($remote, "$todo_dir/${prefix}_$srpm",
				      "$prefix_dir/$srpm");
			$pkgs .= " $prefix_dir/$srpm";
		    }
		    next unless $ok;
		    
		    # spawn remote build bot and save output on local file
		    # (remove status.log before building, otherwise we can have
		    # a install_deps_failure and reschedule even if the package
		    # is currently building)
		    #
		    plog('DEBUG', "remove status file");
		    ssh($remote, "rm $status_file 2>/dev/null");
		    
		    plog('INFO', "Execute build command on $host/$arch");
		    
		    my $temp = mktemp("$config->{tmp}/ulri.tmp.$prefix.XXXXX");
		    my $cmd = $bot_conf->{command};
		    $cmd =~ s!__ARCH__!$arch!g;
		    $cmd =~ s!__DIR__!$path/$prefix-$arch!g;
		    $cmd =~ s!__TARGET__!$target!g;
		    $cmd =~ s!__PACKAGER__!$user!g;
		    my $section = $media;
		    $section =~ s!/.*$!!;
		    $cmd =~ s!__SECTION__!$section!g;
		    
		    my $media_to_add;
		    if (ref $config->{media}{$target}{$media}) {
			$media_to_add = join ' ', @{$config->{media}{$target}{$media}};
		    } elsif (ref $config->{media}{default}{$media}) { 
			$media_to_add = join ' ', @{$config->{media}{default}{$media}};
		    }
		    plog('DEBUG', "Will compile only with media $media_to_add");
		    $cmd =~ s!__MEDIA__!$media_to_add!g;
		    
		    #- allow x86_64 hosts to build i586 packages
		    if ($arch eq 'i586') {
			$cmd = "setarch i586 $cmd";
		    }
		    
		    plog('DEBUG', "Build $pkgs");
		    ssh($remote, "'echo PID=\$\$; exec $cmd $pkgs &>$prefix_dir/log/botcmd.\$(date +%s).\$(hostname -s).log' > $temp &");
		    
		    # wait 10 seconds or until we have the log file
		    # plus 20 seconds if it timeouts.
		    #
		    if (check_file_timeout($temp, 10)) {
			plog('WARN', "Timeout waiting for building start. Waiting more 20s.");
			if (check_file_timeout($temp, 20)) {
			    plog('WARN', "Timeout! Abandoning the build.");
			    last;
			}
		    }
		    
		    # get remote PID from log file
		    #
		    my $pid = get_pid_from_file($temp);
		    unlink $temp;
		    plog('DEBUG', "remote pid $pid");
		    if (!$pid) {
			plog('WARN', "pid is unknown, abandoning the build.");
			last;
		    }
		    
		    # create lock file
		    #
		    my $lock_arch = $noarch ? "$arch-noarch" : $arch;
		    my $lock_file = "$todo_dir/${prefix}_" .
			"$lock_arch.$bot.$host.$fulldate.$pid.lock";
		    plog('DEBUG', "create lock $lock_file");
		    create_file($lock_file, "$program_name $$", time());
		    
		    last;
		}
		last if $compildone->{$prefix}{$media}{$arch}; 
		last if $compildone->{$prefix}{$media}{noarch}; 
	    }
	    
	    # Count packages to compile for each architecture. Count noarch
	    # package only once.
	    #
	    $arch = 'noarch' if $noarch;
	    unless ($compildone->{$prefix}{$media}{$arch}) { 
		$to_compile{$arch}++ if !($noarch && $noarch_countflag);
	    }
	    $noarch_countflag = 1 if $noarch;
	}
    }
}

plog('MSG', "Current status");

if (keys %build_list) {
    plog('INFO', "currently building:");
    map { plog('INFO', "  $_: " . join('', @{$build_list{$_}})) } keys %build_list;
}

plog('INFO', "jobs in queue:", %to_compile ?
    map { sprintf("%s(%d)", $_, $to_compile{$_}) } keys %to_compile : "none");


unlink $pidfile;
exit();


#
# Subroutines
#

sub get_pid_from_file {
    my $file = shift;

    my $pid;
    open my $FILE, $file || die "FATAL: can't open $file";
    local $_;
    while (<$FILE>) { last if ($pid) = /^PID=(\d+)/ }

    $pid;
}

sub create_file {
    my $file = shift;
    my @contents = @_;
	
    open my $FILE, ">$file" or die "FATAL: can't open $file for writing";
    print $FILE "@contents";
}

sub read_line {
    my $file = shift;

    open my $FILE, "<$file" or die "FATAL: can't open $file for reading";
    my $contents = <$FILE>;

    $contents;
}

sub check_file_timeout {
    my $file = shift;
    my $time = shift;

    my $i = 0;
    while ($i < $time && (!-f $file || -z $file)) { sleep 1; $i++ }

    $i == $time;
}

__END__

# ulri ends here

Discussion
----------
 
20060802 (Warly)

* I prefer creating a separate scheduler, so that it can eventually call
  other bots.
* bots should be able to take packages by themselves.
* Iurt will perform several checks, they have to be standard and usable
  by the maintainer, the results must be put in a visible directory or path
* We can put packages either in a dir or to prefix all files with the date
  and uploader. Having all files in a dir will make the listing simpler.
  Prefixing the files could be problematic if we base the rpm name and
  version parsing on the filename.
* ulri knows the prefix, he could ask iurt to put the packages in a dir
  with the same prefix.

20060806 (Warly)

* All the packages are put in done, then the final youri is run to put them
  in queue/

20061104 (claudio)

* Instead if having configuration defaults for our environment and using
  ulri with the defaults, it would be nicer to have minimalistic/generic
  defaults and install a configuration file in kenobi
* Ulri's configuration file could be renamed to .ulri.conf instead of 
  .upload.conf.   ==> ok, it's also used by emi